City of Tacoma

CITY OF TACOMA

ADDENDUM NO. 1 DATE: 10/5/2018

REVISIONS TO: Request for Bids Specification No. CT18-0337F MRP SUPPLIES - HARDWARE

NOTICE TO ALL BIDDERS:

This addendum is issued to clarify, revise, add to or delete from, the original specification documents for the above project. This addendum, as integrated with the original specification documents, shall form the specification documents. The noted revisions shall take precedence over previously issued specification documents and shall become part of this contract.

REVISIONS TO THE SUBMITTAL DEADLINE:

The submittal deadline remains the same.

REVISIONS TO THE REQUEST FOR QUOTATION FORMS:

The Request for Quotation Forms have been replaced with the attached forms labeled as Request for Quotation 6000047035 and 6000047037.

NOTE: Acknowledge receipt of this addendum by initialing the corresponding space as indicated on the Signature Page. Vendors who have already submitted their bid/proposal may contact the Purchasing Division at 253-502-8468 and request return of their bid/proposal for acknowledgment and re-submittal. Or, a letter acknowledging receipt of this addendum may be submitted in an envelope marked Request for Bids Specification No. CT18-0337F Addendum No. 1. The City reserves the right to reject any and all bids, including, in certain circumstances, for failure to appropriately acknowledge this addendum.

Form No. SPEC-220A Revised: 07/30/2015 CITY OF TACOMA Page 1 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

SCHEDULE 1

Extend net price and provide net total value. Quantities provided are an estimated annual usage.

Circle or underline the part number and manufacturer quoted or bid may be considered non-responsive. Provide lead times in the Delivery Date column. Delivery date will default to two weeks ARO if not provided.

Item # Material# Delivery QTY UM Net Price Total Description Date

10 21647 62 EA ADAPTER,ENTRY - F CONNECTOR, ADAPTER, 5/8 TO F, 5/8"-24 ENTRY TO F FEMALE

Material # Manf Part# Manufacturer Name 21647 GF625CH-T Broadband Products Inc

20 18918 700 EA ANCHOR,1/2IN,CONCRETE,DROP-IN ANCHOR, CONCRETE, DROP-IN HDI 1/2IN FOR 1/2IN BOLT, 50/BX. USE 5/8IN HILTI DRILL BIT Material # Manf Part# Manufacturer Name 18918 2080046 HILTI CITY OF TACOMA Page 2 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 30 18916 300 EA ANCHOR,1/4IN,CONCRETE,DROP-IN ANCHOR, CONCRETE, DROP-IN HDI 1/4IN FOR 1/4 INCH BOLT, USES 3/8IN HILTI DRILL BIT. Material # Manf Part# Manufacturer Name 18916 409492 HILTI

40 18917 600 EA ANCHOR,3/8IN,CONCRETE,DROP-IN ANCHOR, CONCRETE, DROP-IN HDI 3/8IN FOR 3/8IN BOLT, USE 1/2IN HILTI DRILL BIT. Material # Manf Part# Manufacturer Name 18917 2058129 HILTI

50 34496 70 EA BAIL,1/0 CU,HOT LINE CLAMP BAIL, HOT LINE CLAMP, 1/0 COPPER. Material # Manf Part# Manufacturer Name 10001552 S4425-10 HOMAC 10001551 J1467 BURNDY

60 18970 64 EA BAND,5/8IN W,STAINLESS STEEL BAND, METAL, STAINLESS STEEL, 5/8IN WIDE, .030 INCH THICK, MINIMUM LOOP DIAMETER OF 2 INCHES. Material # Manf Part# Manufacturer Name 18970 J207 BAND-IT

70 39555 195 EA BLADE,12IN X 5/8IN,10T/IN,SAWZALL,BI-MTL BLADE, SAWZALL, ALL PURPOSE, BI-METAL, 12 INCH LONG, 10 TEETH PER INCH, FOR CUTTING ALL WOODS, EMBEDDED NAILS, COMPOSITION MATERIALS, PLASTIC, CAST ALUMINUM, LIGHT GAUGE NON-FERROUS METALS, AND CAST IRON. PACKAGED 5 BLADES PER POUCH - OUR PURCHASE IS BY THE BLADE. Material # Manf Part# Manufacturer Name 39555 48-00-5194 MILWAUKEE CITY OF TACOMA Page 3 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 80 34516 62 EA BLOCK,SNATCH,3IN SHEAVE,HANDLINE BLOCK, SNATCH, SINGLE SHEAVE, ALL FIBERGLASS, 3IN SHEAVE, 1/2IN AXLE, 1IN STEEL EYEBOLT (MINIMUM 1IN INSIDE DIAMETER), SAFE WORKING LOAD 1,000 LBS, TESTED 4,000 LBS FOR HAND LINE USE. Material # Manf Part# Manufacturer Name 10001594 3553 HASTINGS 10001593 SN-1000 WESTERN TOOL AND DIE

90 56062 20 EA BRACKET,TERMINAL BLOCK STANDOFF,LONG BRACKET, TERMINAL BLOCK STANDOFF, LONG, TO MOUNT MARATHON TERMINAL BLOCK CATALOG NUMBER 1612. MANUFACTURED PER TACOMA POWER MATERIAL STANDARD DRAWING 1135.02.

100 34571 39 LB BRAID,195 AMPS RATED,CU,STR BRAID, COPPER, STRANDED, 195 AMPS RATED CARRYING CAPACITY, 768 NO 30 AWG WIRES, 24 STRANDS WITH 32 WIRE PER STRAND 76800 NOMINAL CIRCULAR MILLS (APPROXIMATE AWG #1), 3.8FT PER POUND, FURNISHED ON 50 POUND REELS Material # Manf Part# Manufacturer Name 10001739 NE24323OT CONNER WIRE 10001738 252 CONTINENTAL CORDAGE CORP.

110 72867 83 EA BUCKET,PLASTIC,5 GALLON,WHITE, NO LID BUCKET, PLASTIC,5 GALLON, WHITE. ECONOMY GRADE. WITH METAL HANDLE. NO LID. Material # Manf Part# Manufacturer Name 10010551 S-16970W ULINE

120 55740 40 EA CEMENT,HYDRAULIC CEMENT, HYDRAULIC, INSTANT SETTING, 10LB TUBS. Material # Manf Part# Manufacturer Name CITY OF TACOMA Page 4 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 10008194 DURAPLUG 10LB L&M CONSTRUCTION PRODUCTS 10008196 LEAK STOPPER 17610 SAKRETE 10008195 HYDRAULIC WATERSTOP 10LB QUICKRETE 10008193 QUICK PLUG 14090 DAP 10008192 WATERPLUG T5002 THORO CONSUMER PRODUCTS 10008191 AQUA TITE 4.5KG BASALITE CONCRETE PRODUCTS

130 19228 300 FT CHAIN,#12,SINGLE STEEL,JACK,BRIGHT,100FT CHAIN, JACK, SINGLE STEEL NO 12, BRIGHT, 100 FT LENGTH.

140 19229 150 FT CHAIN,3/16IN,STRAIGHT LINK,GALV CHAIN, GALVANIZED, 3/16IN STRAIGHT LINK, PROOF TEST

150 19306 11 EA CLOSER,DOOR,HYDRAULIC,AL FINISH CLOSER, DOOR, HYDRAULIC, NON-HANDED, WITH FOLLOWING STANDARD FUNCTIONS: CLOSING SPEED CONTROL, LATCH SPEED CONTROL, BACK CHECK CONTROL AND CLOSING SPRING ADJUSTMENT. FINISH TO BE ALUMINUM. * * * NO SUBSTITUTE * * * Material # Manf Part# Manufacturer Name 19306 LCN MODEL 4040XP RW/PA AL INGERSOLL-RAND

160 55793 100 EA CONNECTOR,#12-#10,PIN,600 VOLT CONNECTOR, WIRE, ROUND PIN, NO.12 TO NO.10, COMPRESSION TYPE, 600 VOLT INSULATED TERMINAL. PACKAGED 100 PER BAG. Material # Manf Part# Manufacturer Name 55793 PV10-P55-LY PANDUIT

170 55794 400 EA CONNECTOR,#16-#14,PIN,600 VOLT CONNECTOR, WIRE, ROUND PIN, NO.16 TO NO.14, COMPRESSION TYPE, 600 VOLT INSULATED TERMINAL. PACKAGED 100 PER BAG. Material # Manf Part# Manufacturer Name CITY OF TACOMA Page 5 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 55794 PV14-P47-C PANDUIT

180 49252 16 EA CONTACT BLOCK,TYPE KA,SCADA CONTACT BLOCK, 9001 CLASS, 1 N.O.- 1 N.C. CONTACTS, CLEAR COVER *** NO SUBSTITUTE *** Material # Manf Part# Manufacturer Name 49252 9001KA1 SQUARE D

190 35190 175 EA COUPLER,-6DB,DIRECT,WALL COUPLER, DIRECT, DCWG-6, MUST BE ABLE TO WITHSTAND OUTDOOR CONDITIONS INCLUDING SUNLIGHT, WATER, FREEZING, SHOCK, VIBRATION, AND HANDLING. HOUSINGS MUST PREVENT MOISTURE AND RF INGRESS OR LEAKAGE. MUST BE RATED FOR PASSING 5 TO 1000 MHZ. Material # Manf Part# Manufacturer Name 10003371 DCWG-6 TVC 10003372 SVDCW-6-1GHZ SIGNAL VISION 10006190 MARDC1106L MARATHON

200 60319 100 EA COUPLER,GROUND ROD,3/4 IN COUPLER, COMPRESSION TYPE, 3/4" COPPER-BONDED RODS, UL LISTED. Material # Manf Part# Manufacturer Name 10008988 70CNT BLACKBURN 10008987 CC34 ERITECH

210 37662 46 EA COUPLING,2IN,SPLIT DUCT TO SPLIT DUCT COUPLING, 2 INCH, SPLIT DUCT CONDUIT TO SPLIT DUCT CONDUIT. A SPLIT COUPLING FOR CONNECTING SPLIT CONDUIT TO SPLIT CONDUIT AROUND EXISTING CABLE. SNAPS TOGETHER WITH AN INTERLOCKING DESIGN CREATING A TIGHT, SMOOTH, WEATHER TIGHT SEAL. NO OTHER DEVICE IS NEEDED FOR THE SEALING PROCESS. *** NO SUBSTITUTE *** CITY OF TACOMA Page 6 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date Material # Manf Part# Manufacturer Name 37662 RC2F CONDUIT REPAIR SYSTEMS

220 72868 25 EA COVER,PLASTIC,5 GALLON BUCKET,EZ OFF COVER, PLASTIC, FOR 5 GALLON BUCKET. EASY REMOVE LID. Material # Manf Part# Manufacturer Name 72868 S-20541W ULINE

230 10010 48 EA CRAYON,BLACK,LUMBER CRAYON, LUMBER MARKING, BLACK# Material # Manf Part# Manufacturer Name 10006398 10384 C.H. HANSON COMPANY 10006397 500-80323 MARKALL 10006396 36500 DIXON

240 46971 12 EA DEADBREAK,350CU,600A,15KV,CONNECTOR DEADBREAK CONNECTOR KIT, 600A, 15kV, 350KCMIL. KIT CONTAINS ONE EACH OF THE FOLLOWING COOPER PART NUMBERS: * DT625T - 600A T-BODY W/TEST POINT * LRTP615 - LOADBREAK REDUCING TAP LUG * CC6C19T - THREADED COMP CONNECTOR 350 * CA625DD - 600A CABLE ADAPTER 1.08-1.28IN * LPC215 - 8.3/14.4 PROTECTIVE CAP WITH GROUND * 8461 - SA3 COLD SHRINK SHIELD ADAPTER KIT, FOR CABLE JACKET OD 1.27 TO 2.17 IN. *** NO SUBSTITUTE *** Material # Manf Part# Manufacturer Name 46971 TP615DD19TC-SA3 COOPER INDUSTRIES

250 19478 25 EA DEADEND,#2 ACSR,AUTO COMPRESSION DEADEND, AUTOMATIC COMPRESSION, 2 ACSR, FEED-THRU, CLEVIS WITH IN-LINE PULLING EYE FOR A HOIST'S HOOK, RED. Material # Manf Part# Manufacturer Name 19478 GD-444TA FARGO CITY OF TACOMA Page 7 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 260 34682 550 EA DEADEND,#2 ACSR,PREFORMED DEAD-END, PREFORMED, FOR USE WITH #2 ACSR ("SPARROW"), 24IN LENGTH, COLOR CODE RED. **************** NOT ACCEPTABLE: CHANCE NO. 30AWCG **************** Material # Manf Part# Manufacturer Name 10009922 DGFW4542 HUBBELL 10007354 DG-4542 PREFORMED LINE PRODUCTS 10007363 HD518 HELICAL

270 19481 100 EA DEADEND,#4 ACSR,PREFORMED DEAD-END, PREFORMED, FOR USE WITH #4 ACSR ("SWAN"), 17IN LENGTH, COLOR CODE ORANGE. ******************* NOT ACCEPTABLE: HELICAL NO. HD-514(AL COV) ******************* Material # Manf Part# Manufacturer Name 10009920 DGFW4541 HUBBELL 10007380 HD514 HELICAL 10007381 DG-4541 PREFORMED LINE PRODUCTS

280 34678 150 EA DEADEND,#4 CU,AUTO COMPRESSION DEADEND, AUTOMATIC COMPRESSION, #4 CU, FEED-THRU, STRAP CLEVIS WITH HOLES FOR A HOIST'S HOOK. Material # Manf Part# Manufacturer Name 10007446 41 LD MACLEAN

290 34679 400 EA DEADEND,#6 CU,AUTO COMPRESSION DEADEND, AUTOMATIC COMPRESSION, #6 CU, FEED-THRU, STRAP CLEVIS WITH HOLES FOR A HOIST'S HOOK. Material # Manf Part# Manufacturer Name 10002035 GD 511 FARGO 10002034 61LD MACLEAN CITY OF TACOMA Page 8 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 300 34683 150 EA DEADEND,1/0 ACSR,PREFORMED DEAD-END, PREFORMED, FOR USE WITH #1/0 ACSR ("RAVEN"), 26IN LENGTH, COLOR CODE YELLOW. Material # Manf Part# Manufacturer Name 10002045 80003 SLACAN 10002044 HD522 HELICAL 10002042 DG-4544 PREFORMED LINE PRODUCTS 10009923 DGFW4544 HUBBELL

310 34684 25 EA DEADEND,4/0 ACSR,PREFORMED DEADEND, PREFORMED, FOR USE WITH 4/0 ACSR ("PENGUIN"), 39IN LENGTH, COLOR CODE RED. Material # Manf Part# Manufacturer Name 10009924 DGFW4547 HUBBELL 10007361 DG-4547 PREFORMED LINE PRODUCTS 10007362 HD528 HELICAL

320 58273 20 EA DEADEND,795 AAC,PREFORMED DEADEND, PREFORMED, FOR USE WITH 795 AAC ("ARBUTUS"), 62IN LENGTH, COLOR CODE BROWN. Material # Manf Part# Manufacturer Name 58273 DG-4552 PREFORMED LINE PRODUCTS

330 19520 22 SET DIE,WK-840,BURNDY DIE, BURNDY, W-K840, TO FIT MD-6 TOOL. *** NO SUBSTITUTE *** Material # Manf Part# Manufacturer Name 19520 W-K840 BURNDY

340 19523 40 SET DIE,WO,BURNDY DIE, BURNDY, WO FOR MD-6 TOOL *** NO SUBSTITUTE *** Material # Manf Part# Manufacturer Name 19523 WO BURNDY CITY OF TACOMA Page 9 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 350 55931 50 EA DIN RAIL,35MM X 7.5MM X 2 METER,GALV DIN RAIL, SLOTTED HOLES. 35MM X 7.5MM X 2 METER. TEMPERED, GALVANIZED AND CHROMATED. FOR MOUNTING TERMINAL BLOCKS. Material # Manf Part# Manufacturer Name 55931 XBANS3575P EATON

360 63784 17 EA ENCLOSURE,24IN X 20IN X 8IN,NEMA 3R ENCLOSURE, 24IN X 20IN X 8IN, NEMA 3R, HINGED COVER, PADLOCKABLE HANDLE, GRAY FINISH, WHITE INTERNAL PANEL. Material # Manf Part# Manufacturer Name 63784 A24R208HCR W/A24P20 PANEL HOFFMAN

370 55930 325 EA END STOP,35MM,DIN RAIL END STOP, UNIVERSAL, 35MM. PLASTIC SCREW ON. FOR USE WITH DIN RAIL. Material # Manf Part# Manufacturer Name 10008742 E/NS 35 N 0800886 PHOENIX CONTACT 10008741 XBAES35C EATON

380 34697 150 EA EYE,1IN,30,000 LB,SUSPENSION,BALL TYPE EYE, SUSPENSION, BALL TYPE, 11/16IN STOCK, INSIDE DIMENSION 1IN X 2IN, 30,000 STRENGTH LBS ++++++++++++++++++++++++++++++ NOT ACCEPTABLE: JOSLYN #13000 ++++++++++++++++++++++++++++++ Material # Manf Part# Manufacturer Name 10002081 BO-55 ACE 10002080 OEB-55 MACLEAN 10002079 70776 OHIO BRASS 10002077 BE30 ANDERSON CITY OF TACOMA Page 10 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 390 38870 50 EA FERRULE,1/0,ZINC PLATE CU,5/8IN THREAD FERRULE, CABLE, GROUNDING, NO. 1/0 COPPER, COMPRESSION, ZINC PLATED, 5/8 INCH - 11 NC THREADED TERMINAL MINUMUM OF 1-1/2 INCH LENGTH. Material # Manf Part# Manufacturer Name 38870 12999 HASTINGS

400 63885 40 EA FERRULE,4/0,TIN PLATE CU,SHROUDED,THREAD FERRULE,4/0, TIN PLATED COPPER, SHROUDED, THREADED STUD TYPE. Material # Manf Part# Manufacturer Name 63885 C6003118 HUBBELL

410 19760 14 EA FIXTURE,LIGHTING,BASE,W/PRF,W/WIRING FIXTURE, LIGHTING, BASE, NON-METALLIC, INCLUDES WEATHERPROOF FIXTURE BASE AND WIRING COMPARTMENT, FIXTURE BASE WITH SOCKET, AND GASKETS. PROVIDED WITH CLEAR PLASTIC GLOBE. Material # Manf Part# Manufacturer Name 19760 606 MCGILL

420 19972 75 EA GUARD,1-1/2IN DIA MAX,TREE,SPLIT POLY GUARD TREE, POLYETHYLENE SPLIT TUBING, 6 FOOT IN LENGTH, MINIMUM DIAMETER 1.01IN, MAXIMUM DIAMETER 1.50IN. Material # Manf Part# Manufacturer Name 19972 PTG-0205 PREFORMED LINE PRODUCTS

430 34744 190 EA GUARD,1272 AAC,LINE,17 RODS/SET,WHITE LINE GUARD, SINGLE SUPPORT, FOR 1272 MCM AAC WIRE. LENGTH OF RODS 51IN, 17 RODS PER SET, COLOR CODE: WHITE Material # Manf Part# Manufacturer Name 10006496 ALG3225 DULMISON 10006495 MG-0159 PREFORMED LINE PRODUCTS CITY OF TACOMA Page 11 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 440 57941 80 EA GUARD,GROUND,STEEL GUARD, CABLE, 14GA STEEL, HOT DIPPED GALVANIZED. 1-1/8IN X 1-1/8IN X 8'. FOR COVERING GROUND WIRE. *** NO SUBSTITUTE *** Material # Manf Part# Manufacturer Name 57941 J984 MACLEAN

450 34754 800 EA GUY,HOOK GUY, HOOK. Material # Manf Part# Manufacturer Name 10010582 DG22H3 EATON 10007885 GH6ILS CHANCE 10007760 P134AXW MACLEAN

460 69035 44 RO HOOK AND LOOP,1/2IN X 75FT,BLACK HOOK AND LOOP, 1/2IN X 75 FT ROLL. BLACK. Material # Manf Part# Manufacturer Name 69035 189755 VELCRO

470 20012 52 EA HOOK,HANDLINE HOOK, HAND-LINE 500 LB. WORKING LOAD, MADE FROM 3/8IN DIAMETER ROD *** NO SUBSTITUTE *** CITY OF TAC. SPECIAL *** Material # Manf Part# Manufacturer Name 20012 35TAC BASHLIN

480 20016 288 EA HOOK,SNAP,SWIVEL,HAND LINE HOOK, SNAP, SWIVEL, HAND LINE. Material # Manf Part# Manufacturer Name 20016 470 KLEIN CITY OF TACOMA Page 12 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 490 20023 40 EA INDICATOR,FAULT,HOTSTICK MOUNTABLE,O/H INDICATOR, FAULT, FOR OVERHEAD APPLICATION. INDICATOR-STROBE WITH MINIMUM OF 120 HOURS OPERATION APPLICATION-STANDARD CLAMPSTICK TRIP LOGIC-ADAPTIVE TRIP FOR 3-800AMPS OF LOAD CURRENT CONDUCTOR RANGE-#2 ACSR THROUGH 795 AAC RESET OPTION-4 HOUR RESET WITH LOAD CURRENT OVERRIDE BATTERY, REPLACEABLE, MINIMUM 10 YEAR LIFE. OPERATION TEMPERATURE-MINUS 40DEG C TO PLUS 85DEG C MAXIMUM OPERATING VOLTAGE-44KV Material # Manf Part# Manufacturer Name 20023 1548FH-ANC3-T-N-A FISHER-PIERCE

500 34759 12 EA KNIFE,SKINNING,FOLDING,LINEMAN'S KNIFE, SKINNING, LINEMEN'S, FOLDING, WITH BLADE THAT LOCKS OPEN, MINIMUM BLADE LENGTH 2-1/2IN, CURVED FOR SLITTING, WITH PLASTIC HANDLE. Material # Manf Part# Manufacturer Name 10002219 5400 ESTEX 10002218 35-286 IDEAL INDUSTRIES INC. 10002217 1550-4 KLEIN

510 56451 172 EA LABEL CASSETTE,1/4IN TUBE,WHITE,PANDUIT LABEL CASSETTE, 1/4 INCH TUBING X 6 FEET, HEAT SHRINKABLE, #16-#10 AWG, PRINTS BLACK ON WHITE, FOR PANDUIT PORTABLE LABELING SYSTEM. ***NO SUBSTITUTE*** Material # Manf Part# Manufacturer Name 56451 H000X044H1C PANDUIT

520 56453 30 EA LABEL CASSETTE,1IN SELF LAMINATE,PANDUIT LABEL CASSETTE, 1 INCH X 1-1/2 INCH, SELF LAMINATING, ADHESIVE VINYL, PRINTS BLACK ON WHITE, FOR PANDUIT PORTABLE LABELING SYSTEM. ***NO SUBSTITUTE*** Material # Manf Part# Manufacturer Name 56453 S100X150VAC PANDUIT CITY OF TACOMA Page 13 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date

530 54949 13 EA LEAK DETECTOR,8 OZ,LIQUID LEAK DETECTOR, 8 OUNCE LIQUID, FOR DETECTING GAS LEAKS. PROVIDED WITH FLEXIBLE 12IN TUBE FOR HARD TO REACH AREAS. Material # Manf Part# Manufacturer Name 54949 MS-SNOOP-8OZ SWAGELOK MANUFACTURING

540 20219 143 EA LINK,5/16IN,CHAIN,LAP LINK, CHAIN, LAP, 5/16 INCH Material # Manf Part# Manufacturer Name 20219 5800724 CAMPBELL

550 20250 16 EA MARKER,4IN,ELECTRONIC,RED,BALL TYPE MARKER, ELECTRONIC, UNDERGROUND, 4IN DIAMETER BALL, RED, "POWER" TUNED CHIP, SELF LEVELING, 5 FOOT LOCATOR RANGE. Material # Manf Part# Manufacturer Name 20250 1402XR RED 3M

560 20255 82 EA MONITOR,12V,VEHICLE BATTERY VEHICLE BATTERY MONITOR, 12 VOLT NEGATIVE GROUND BATTERY SYSTEM, ENERGIZES ELECTRICAL ACCESSORIES ON VEHICLE START-UP, MINIMUM TIME DELAY TO DE-ENERGIZE ACCESSORIES 15 MINUTES WITH ADJUSTABLE TIME DELAY TO 15 HOURS, HIGH VOLTAGE DISCONNECT AT OPERATING TEMPERATURE RANGE -50 TO +200 F, MOUNT WITH 2 SHEET SYSTEM VOLTAGE OF 18 VOLTS OR MORE, REVERSE POLARITY PROTECTION, LOAD CURRENT 30 AMPS, STAND BY CURRENT OF 10 MIL AMPS OR LESS, METAL SCREWS, MAXIMUM SIZE 5-1/2 INCH X 3 INCH X 1-1/4 INCH. Material # Manf Part# Manufacturer Name 20255 CG-SELECT CHARGEGUARD INC CITY OF TACOMA Page 14 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 570 20262 12 EA MOUNT,TRIPLE CLUSTER,TRANSFORMER MOUNT, CLUSTER, TRANSFORMER, REA STANDARD, FULLY ASSEMBLED, WITH 5/8 INCH SQUARE HEAD BOLTS, AND POLE GAINS. STYLE TO BE WING TYPE BOLTED OR WELDED - NO POLE BANDS. DESIGN SHALL BE SUCH THAT TRANSFORMERS AND CLUSTER MOUNT MAY BE ASSEMBLED ON THE GROUND. MUST BE ALUMINUM. Material # Manf Part# Manufacturer Name 20262 12 MW-24A ALUMA FORM

580 20277 300 LB NAIL,16D,COMMON,GALV,3-1/2IN NAIL, COMMON, 16D, GALVANIZED, 3-1/2 IN LONG, NO. 8 GA, 47 PER LB, 50 LBS PER CARTON, ASTM #F 1677NLCM-11Z

590 53125 50 EA PIGTAIL,#12 AWG SOLID,GROUNDING PIGTAIL, GROUNDING, #12 SOLID AWG GREEN, 8IN LONG WITH LOOP AND SCREW, STRIPPED END. Material # Manf Part# Manufacturer Name 53125 30-3392 IDEAL INDUSTRIES INC.

600 20410 320 EA PLATE,36,000 LB,EYE,GALV GUY PLATE, POLE EYE, 7/8IN, 36,000 LB MAX, 2 BOLT HOLES, 7/8IN BOLT MOUNTING, 7/8IN CLEVIS Material # Manf Part# Manufacturer Name 10005694 FP-7S7 ACE 10005695 EPR-77S-7 MACLEAN 10005693 PX37A MACLEAN

610 60318 85 EA PLATE,GROUNDING,4/0 CU - 2-HOLE NEMA GROUNDING PLATE, COMPRESSION TYPE, NEMA 2-HOLE TO 4/0 CU. IEEE-837 LISTED. Material # Manf Part# Manufacturer Name 10008986 GP2250-2 THOMAS & BELTS 10008985 YGF29-2N BURNDY CITY OF TACOMA Page 15 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 620 20414 128 EA PLIERS,9IN,SIDE CUTTER,LINEMANS PLIER, LINEMAN, SIDE CUTTERS, 9 IN, HIGH LEVERAGE WITH ULTRA-DURABLE CUTTING KNIVES FOR ACSR, BOLTS, NAILS, ETC., AND CRIMPING DIE FOR SLEEVE CONNECTORS. HANDLES DIPPED IN PLASTIC FOR BETTER GRIP. Material # Manf Part# Manufacturer Name 20414 D20009NECR KLEIN

630 34895 96 EA PULL-LINE,SYNTHETIC,CONDUIT PULL-LINE, SYNTHETIC, UNTWISTED PARALLEL STRANDS, BOUND TOGETHER WITH SPIRAL JACKET BINDER 335 TENSILE, APPROX. 240 LB KNOT BREAKING POINT, PACKAGE WEIGHT APPROX. 10 LBS, 3500 FEET PER BOX, PACKAGED IN CARDBOARD BOX WITH CENTER PUNCHOUT, LINE PULLS FROM CENTER OF TUBE. *** NO SUBSTITUTE *** +++++++++++++++++++++++++ NOT ACCEPTABLE: CWC 350T +++++++++++++++++++++++++ Material # Manf Part# Manufacturer Name 10006241 3500 SPIRAL WRAP POLYMER GROUP, INC. 10006240 35M-027002/023205 CONTINENTAL WESTERN CORP.

640 20490 1,000 EA RACK,7-POSITION,SECONDARY RACK, SECONDARY, 7 POSITION, HOT DIPPED GALVANIZED, EXTENDED BACK, 5/8IN CLEVIS PIN, 12 GAUGE SUPPORTS, 9 GAUGE CHANNEL BACK *** NO SUBSTITUTES *** Material # Manf Part# Manufacturer Name 10007101 C2070048 HUBBELL 10007100 J769 MACLEAN

650 34896 54 EA RAKE,LAWN,HVY DTY RAKE, LAWN, HEAVY DUTY ONLY. METAL TINES, SPRING BACK, WOOD HANDLE. CITY OF TACOMA Page 16 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date Material # Manf Part# Manufacturer Name 10002598 163055200 TRUE TEMPER 10010077 J-250 1923700 JACKSON 10010076 1WG30 GRAINGER

660 34899 90 EA RECEPTACLE,20AMP-125V,DUPLEX,GROUNDED RECEPTACLE, DUPLEX OUTLET, SELF GROUNDING, BACK AND SIDE WIRED, 20A-125VOLT, FOR STRANDED WIRE, IVORY COLOR# Material # Manf Part# Manufacturer Name 10002606 BR20V-BU IVORY EAGLE COMTRONICS INC 10002609 BR20I LEVITON 10002608 CBR201 HUBBELL 10002605 5362V (IVORY) EAGLE COMTRONICS INC 10005113 BR20V COOPER INDUSTRIES

670 34901 186 EA RECEPTACLE,6 OUTLET,MULTIPOWER STRIP RECEPTACLE, OUTLET, MULTI-POWER STRIP, 6 OUTLETS, SURGE/NOISE FILTER AND SUPPRESSOR, RATING: 15 AMP, 120 VOLT AC, 60 HZ, 1875 WATTS, CONTINUOUS DUTY, MAXIMUM SURGE VOLTAGE AT LEAST 6000V, MINIMUM SURGE CURRENT HOT TO NEUTRAL 46,000 AMPS, MINIMUM ENERGY DISSIPATION HOT TO NEUTRAL AT LEAST 625 JOULES, UL 1449 RATING 330V, UL 1283 TESTED, WITH 3 FILTERING LEVELS: FILTER 1-80 DB, FILTER 2-103 DB, AND FILTER 3 110 DB, WITH MASTER SWITCH AND PILOT LIGHT, CIRCUIT BREAKER PROTECTION. Material # Manf Part# Manufacturer Name 10002614 WT6 S.L. WABER 10002613 ISOBAR6 TRIPP-LITE 10006420 ISOBAR6ULTRA TRIPP-LITE

680 34903 1,100 EA REDUCER,5/8IN X 1IN,TRANSF,AL REDUCER, ALUMINUM, 5/8IN TO 1IN. FOR USE WITH STUD MOUNTED TRANSFORMER CONNECTORS TO ADAPT 1IN CONNECTORS TO THE 5/8IN TRANSFORMER STUDS. CITY OF TACOMA Page 17 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date Material # Manf Part# Manufacturer Name 10002618 RA158 ERITECH 10002617 AD158 CONNECTOR MANUFACTURING COMPANY

690 20523 24 RO REFLECTIVE,3IN X 150FT,ROLL,SHEETING REFLECTIVE WIDE ANGLE SHEETING, ENGINEERING GRADE, 3IN X 150FT PER ROLL, PRESSURE SENSITIVE, WHITE. Material # Manf Part# Manufacturer Name 10007844 3R150_WHITE COLE BROTHERS 10007843 3430 3M

700 62998 36 EA REPAIR KIT,1.6 GPF,TOILET REPAIR KIT, FOR TOILETS. 1.6 GPF. FOR DIAPHRAM TYPE FLUSHOMETERS. Material # Manf Part# Manufacturer Name 62998 A-41-A 101352 SLOAN PLUMBING

710 62997 22 EA REPAIR KIT,3.5 GPF,TOILET REPAIR KIT, FOR TOILETS. 3.5 GPF. FOR DIAPHRAM TYPE FLUSHOMETERS. Material # Manf Part# Manufacturer Name 62997 A-38-A 101351 SLOAN PLUMBING

720 20555 15 EA RESISTOR,125V DC 2000OHM,BAYONET BASE RESISTOR, 125V-DC, 2000 OHM, BAYONET BASE, TO FIT GE RECEPTACLE ET-16# Material # Manf Part# Manufacturer Name 20555 165A7844P3 GENERAL ELECTRIC

730 63300 150 EA RING,METER,SEALING,LOCKING RING, METER, LOCKING, STAINLESS STEEL. Material # Manf Part# Manufacturer Name 63300 2615-234 DEWALCH CITY OF TACOMA Page 18 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 740 34910 250 EA ROD,3/4IN X 8FT,GROUND,CU CLAD ROD, GROUND, 3/4IN X 8FT COPPER CLAD, UL APPROVED Material # Manf Part# Manufacturer Name 10002635 8448 PORCELAIN PRODUCTS 10002640 8348 MACLEAN 10002639 5448 KEARNEY 10002638 NCC348 NEHRING 10002637 613480 ERITECH 10002636 WA-348-C WILCOR 10002634 348 HARGER 10002633 7508 BLACKBURN 10008271 7508 GALVAN INDUSTRIES INC

750 37417 1,200 FT ROPE,1/2",12 STRAND,TREE ROPE, TREE, 1/2IN DIAMETER, 12-STRAND BRAIDED, 5,400 LB BREAKING STRENGTH, EACH STRAND IS POLYESTER FIBER JACKET OVER POLYOLEFIN CENTER FIBER. COLOR WHITE WITH GREEN STRIPE. 600 FOOT REELS. Material # Manf Part# Manufacturer Name 37417 ARBOR-PLEX SAMSON

760 37418 600 FT ROPE,1/2",3 STRAND,TREE ROPE, TREE, 1/2 INCH DIAMETER, 3-STRAND, 7000 LB BREAKING STRENGTH PER ASTM D-4268, EACH STRAND IS POLYESTER FIBER. COLOR WHITE WITH BLUE FLECKS. STANDARD REEL 600 FEET. Material # Manf Part# Manufacturer Name 37418 TREE MASTER-166 SAMSON CITY OF TACOMA Page 19 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 770 34913 1,800 FT ROPE,1/2IN,POLY,BRAIDED COVER ROPE, POLYESTER, 1/2 INCH DIAMETER, 1-1/2 IN CIRC., BRAIDED COVER AND CORE OF HIGH TENACITY CORDAGE POLYESTER; MINIMUM BREAKING STRENGTH 5,940 LBS. WEIGHT PER 100 FEET 8.0 LBS.; MUST CONTAIN COVER IDENTIFICATION MARKINGS OF MANUFACTURER AND TYPE. COAT ENTIRE COVER WITH A SPLICABLE, WATERBASE, AROMATIC URETHANE COATING. THE ROPE SHALL BE TORQUE FREE, NON-KINKING, IMPERVIOUS TO ROT AND MILDEW. EACH CONTAINER SHALL BE MARKED WITH THE MANUFACTURER'S NAME OR SYMBOL, CATALOG NUMBER, NAME OF ITEM, ROPE DIAMETER, ROPE LENGTH (IN RELAXED STATE), GROSS WEIGHT, NET WEIGHT, NEW ROPE MINIMUM BREAKING FORCE (LBS.), DESIGN FACTOR (RANGE), AND WORKING LOAD LIMITS (RANGE/LBS.) 600 FOOT REELS. COATING COLOR FOR ROPE SUPPLIED IN YEAR ENDING IN: 0 OR 5-GREEN; 1 OR 6-ORANGE; 2 OR 7-BLUE; 3 OR 8-YELLOW; 4 OR 9-RED NON-APPROVED BIDDERS MUST SUPPLY A CERTIFICATION IN WRITING GIVING THEIR ROPES SPECIFICATION AND PROVIDE A 5 FOOT SAMPLE FOR MATERIAL COMMITTEE APPROVAL. Material # Manf Part# Manufacturer Name 10002646 POLYESTER DOUBLE BRAID CONTINENTAL WESTERN CORP. 10002645 SAMPSON STABLE BRAID AMERICAN GROUP CITY OF TACOMA Page 20 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 780 20579 54,000 FT ROPE,1/2IN,POLY,HANDLINE ROPE, POLYESTER, 1/2IN DIAMETER, BREAKING STRENGTH MINIMUM 4400 LBS. A 3-STRAND ROPE WITH AN OUTSIDE COVER COMPRISED OF PART POLYESTER AND PART POLYETHYLENE AND AN INSIDE CORE OF POLYPROPYLENE, WITH TRACERS SPECIFIC TO MANUFACTURER. PACKAGED IN 1200 FT. SPOOLS. CERTIFIED TEST REPORT OF BREAKING STRENGTH REQUIRED WITH EACH SHIPMENT. ROPE WILL HAVE EITHER AN ORANGE AND BLUE TRACER, RED TRACER, OR A SINGLE ORANGE TRACER. ***ALTERNATES TO SUBMIT 20 FOOT SAMPLES FOR EVALUATION PRIOR TO APPROVAL *** Material # Manf Part# Manufacturer Name 10007180 Q3932 HOOVEN ALLISON 10006601 POLY-DAC 325050 CONTINENTAL WESTERN CORP. 10006600 POLY-PLUS 755050 CONTINENTAL WESTERN CORP. 10005721 POLY-DAC TRUCK ROPE 326030 CONTINENTAL WESTERN CORP.

790 20574 400 LB ROPE,1/4IN,MANILA ROPE, MANILA, 1/4IN DIAMETER, THREE STRAND, NO. 1 GRADE, PACKAGED IN BOXES OF NOT MORE THAN 50 LBS. Material # Manf Part# Manufacturer Name 20574 200015 CONTINENTAL WESTERN CORP. CITY OF TACOMA Page 21 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 800 34911 6,600 FT ROPE,1/4IN,POLY,BRAIDED COVER ROPE, POLYESTER, 1/4IN DIAMETER, 3/4IN CIRCUMFERENCE; BRAIDED COVER AND CORE OF HIGH TENACITY CORDAGE POLYESTER; MINIMUM BREAKING STRENGTH 1,550 LBS WEIGHT PER 100 FEET 2.0 LBS; MUST CONTAIN COVER IDENTIFICATION MARKINGS OF MANUFACTURER AND TYPE. COAT ENTIRE COVER WITH A SPLICABLE, WATERBASE, AROMATIC URETHANE COATING. THE ROPE SHALL BE TORQUE FREE, NON-KINKING, IMPERVIOUS TO ROT AND MILDEW. EACH CONTAINER SHALL BE MARKED WITH THE MANUFACTURER'S NAME OR SYMBOL, CATALOG NUMBER, NAME OF ITEM, ROPE DIAMETER, ROPE LENGTH (IN RELAXED STATE), GROSS WEIGHT, NET WEIGHT, NEW ROPE MINIMUM BREAKING FORCE (LBS), DESIGN FACTOR (RANGE), AND WORKING LOAD LIMITS (RANGE/LBS). PACKAGED IN 600 FOOT REELS. COATING COLOR FOR ROPE SUPPLIED IN YEAR ENDING IN: 0 OR 5 - GREEN; 1 OR 6 - ORANGE; 2 OR 7 - BLUE; 3 OR 8 - YELLOW; 4 OR 9 - RED. NON-APPROVED BIDDERS MUST SUPPLY A CERTIFICATION IN WRITING GIVING THEIR ROPES SPECIFICATION AND PROVIDE A 5 FOOT SAMPLE FOR MATERIAL COMMITTEE APPROVAL. Material # Manf Part# Manufacturer Name 10002642 SAMPSON STABLE BRAID AMERICAN GROUP 10002641 POLYESTER DOUBLE BRAID CONTINENTAL WESTERN CORP. CITY OF TACOMA Page 22 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 810 34912 2,400 FT ROPE,3/8IN,POLY,BRAIDED COVER ROPE, POLYESTER, 3/8 INCH DIAMETER, 1-1/8IN CIRC., BRAIDED COVER AND CORE OF HIGH TENACITY CORDAGE POLYESTER; MINIMUM BREAKING STRENGTH 3,420 LBS WEIGHT PER 100 FEET 4.5 LBS; MUST CONTAIN COVER IDENTIFICATION MARKINGS OF MANUFACTURER AND TYPE. COAT ENTIRE COVER WITH A SPLICABLE, WATERBASE, AROMATIC URETHANE COATING. THE ROPE SHALL BE TORQUE FREE, NON-KINKING, IMPERVIOUS TO ROT AND MILDEW. EACH CONTAINER SHALL BE MARKED WITH THE MANUFACTURER'S NAME OR SYMBOL, CATALOG NUMBER, NAME OF ITEM, ROPE DIAMETER, ROPE LENGTH (IN RELAXED STATE), GROSS WEIGHT, NET WEIGHT, NEW ROPE MINIMUM BREAKING FORCE (LBS), DESIGN FACTOR (RANGE), AND WORKING LOAD LIMITS (RANGE/LBS). 600 FOOT REELS. COATING COLOR FOR ROPE SUPPLIED IN THE YEAR ENDING IN: 0 OR 5-GREEN; 1 OR 6-ORANGE; 2 OR 7-BLUE; 3 OR 8-YELLOW; 4 OR 9-RED NON-APPROVED BIDDERS MUST SUPPLY A CERTIFICATION IN WRITING GIVING THEIR ROPES SPECIFICATION AND PROVIDE A 5 FOOT SAMPLE FOR MATERIAL COMMITTEE APPROVAL. Material # Manf Part# Manufacturer Name 10002644 POLYESTER DOUBLE BRAID CONTINENTAL WESTERN CORP. 10002643 SAMPSON STABLE BRAID AMERICAN GROUP

820 71206 13,000 EA SEAL,METER,T-TYPE,ALUMINUM ANODIZED METER SEAL,T-TYPE, ALUMINUM ANODIZED. SECURITY DEVICE. SCORED TO FRACTURE IF TAMPERED WITH. Material # Manf Part# Manufacturer Name 71206 3570000 BROOKS UTILITY PRODUCTS CITY OF TACOMA Page 23 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 830 37777 6,875 LB SEED,GRASS,"SUN AND SHADE MIX" SEED, GRASS, "SUN AND SHADE MIX". MUST BE WASHINGTON OR OREGON ORIGIN TO ENSURE LOCAL CLIMATIC COMPATIBILITY. SEED MUST BE FROM THE MOST CURRENT CROP AVAILABLE AND BE COMPRISED OF 70% TURF TYPE RYE GRASSES (MAY BE 2 OR MORE VARIETIES OF RYE GRASS); 15% CHEWINGS FESCUE; AND 15% RED FESCUE. MAY BE SHIPPED IN 25 OR 50 POUND SACKS, CLEARLY MARKED WITH CONTENT. ++++++++++++++++++++++++++++++++++++++++++++++ ++ ANY MIX CONTAINING TALL FESCUE OR KENTUCKY BLUE GRASS WILL NOT BE ACCEPTED. ++++++++++++++++++++++++++++++++++++++++++++++ ++

840 34928 14 EA SHACKLE,3/4IN,W/THD,7/8IN PIN,ANCHOR SHACKLE, ANCHOR, GALV 3/4IN WITH THREADED 7/8IN PIN BOLT, CLEVIS TYPE, MINIMUM SAFE WORKING LOAD 4-3/4 TONS, MINIMUM AVERAGE BREAKING STRENGTH 57,000 LBS. SAFE WORKING LOAD AND MANUFACTURER'S NAME MUST BE IMPRINTED ON THE SHACKLE. +++++++++++++++++++++++++ NOT ACCEPTABLE: BT.#541-1235 +++++++++++++++++++++++++ Material # Manf Part# Manufacturer Name 10002686 40129 COLUMBUS MCKINNON 10002685 3/4IN MIDLAND FORGE 10002684 3/4" WESTCO 10002683 G209-3/4" CROSBY CITY OF TACOMA Page 24 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 850 34925 28 EA SHACKLE,3/8IN,W/THD,7/16IN PIN,ANCHOR SHACKLE, ANCHOR, GALV 3/8IN WITH THREADED 7/16IN PIN BOLT, CLEVIS TYPE, MINIMUM SAFE WORKING LOAD 1 TON, MINIMUM AVERAGE BREAKING STRENGTH 12,000 LBS. ** SAFE WORKING LOAD AND MANUFACTURER'S NAME MUST BE IMPRINTED ON THE SHACKLE ** Material # Manf Part# Manufacturer Name 10002675 541-0635 BREWER-TICHNER 10002674 3/8"(ACCEPT.ONLY W/NAME ON SHACKLE) WESTCO 10002673 G209-3/8" CROSBY 10002672 3/8IN MIDLAND FORGE 10002671 40109 COLUMBUS MCKINNON

860 22130 30 EA SLEEVE,2/0 ACSR,SEMI-TENSION,7IN CONNECTOR, WIRE, SLEEVE, 2/0 STR ACSR, SEMI-TENSION, 7 IN LENGTH MAX, ANSI C119.4 COMPLIANT, WITHSTANDS 40% OF CONDUCTOR RATED BREAKING STRENGTH, PRE-FILLED WITH PENETROX JOINT COMPOUND AND CAPPED, POSITIVE CENTER STOP. Material # Manf Part# Manufacturer Name 10009130 RCJ20 THOMAS & BETTS 10009131 PTR205 HUBBELL

870 22141 40 EA SLEEVE,4/0 ACSR,TENSION,18-1/2IN CONNECTOR, WIRE, SLEEVE 4/0 STR ACSR, COMPRESSION, FULL TENSION, 18-1/2IN LENGTH. MUST MEET THE ELECTRICAL AND MECHANICAL REQUIREMENTS OF ANSI C119.4 WILL WITHSTAND 95% OF CONDUCTOR RATED BREAKING STRENGTH. Material # Manf Part# Manufacturer Name 22141 RC40 BLACKBURN

880 20825 50 EA SLEEVE,6IN,REPAIR,HEAT SHRINKABLE SLEEVE, REPAIR, HEAT SHRINKABLE, 6 INCHES LONG, RANGE: .70 INCHES TO 1.75 INCHES.# Material # Manf Part# Manufacturer Name CITY OF TACOMA Page 25 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 20825 WCSM 51/16 RAYCHEM

890 20828 28 EA SLEEVE,8IN,REPAIR,HEAT SHRINKABLE SLEEVE, HEAT-SHRINKABLE REPAIR, 8IN LENGTH, FOR #8 - 350MCM PRIMARY UNDERGROUND CABLE JACKET REPAIR. Material # Manf Part# Manufacturer Name 20828 WRS1-08 INERTIA-REPL

900 20824 44,640 EA SLEEVE,METER SOCKET,DISCONNECT SLEEVE, DISCONNECT SOCKET METER, MYLAR POLYESTER FILM, PACKAGED 144 OR 120 PER BAG. ++++++++++++++++++++++++++ NOT ACCEPTABLE: ANCHOR ELEC. #D-5 ++++++++++++++++++++++++++ Material # Manf Part# Manufacturer Name 20824 ZWS-2 PLASTIC DESIGN TECH

910 21102 19 EA SOCKET,50,000 LB,EYE-TONGUE SOCKET, TONGUE EYE, 50,000 LB, GALVANIZED DUCTILE IRON# Material # Manf Part# Manufacturer Name 21102 SA-15-50 ANDERSON

920 22125 400 EA SPLICE,1/0 ACSR,AUTO CONNECTOR, WIRE, AUTOMATIC, NO 1/0 ACSR. +++++++++++ NOT ACCEPTABLE: RELIABLE +++++++++++ Material # Manf Part# Manufacturer Name 10007131 GL-406 FARGO 10007130 7653 MACLEAN

930 20913 175 EA SPLICE,12.5M GUY,AUTO SPLICE, AUTOMATIC, GUY WIRE, 12.5M Material # Manf Part# Manufacturer Name 10009103 5042 MACLEAN CITY OF TACOMA Page 26 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 10009102 GLS5042 HUBBELL

940 22195 40 EA SPLICE,1272 AAC,TENSION CONNECTOR, FULL TENSION SPLICE, 1272 AAC, LENGTH 18.40", PRE FILLED WITH PENETROX JOINT COMPOUND AND CAPPED, ANSI C119.4 COMPLIANT, WITHSTANDS 95% OF CONDUCTOR RATED BREAKING STRENGTH. Material # Manf Part# Manufacturer Name 22195 YTS451A BURNDY

950 35319 35 EA SPLICE,2/0 CU STR,AUTO CONNECTOR, WIRE, AUTOMATIC, SPLICE, FOR 3/0 SOLID OR 2/0 STRANDED COPPER# Material # Manf Part# Manufacturer Name 10003693 GL-118 FARGO 10003692 207 MACLEAN

960 20914 35 EA SPLICE,25M GUY,AUTO SPLICE, AUTOMATIC, STRANDLINK, FOR USE ON 25M GUY WIRE. Material # Manf Part# Manufacturer Name 10010594 5044 MACLEAN 10010593 GLS5044 HUBBELL

970 35361 50 EA SPLICE,336 ACSR,AUTO,18/1 CONNECTOR, AUTOMATIC, SPLICE, NO 336.4 ACSR, FITS ONLY 18/1.

Material # Manf Part# Manufacturer Name 10003811 GL-411 FARGO 10008420 7658AP MACLEAN

980 35353 50 EA SPLICE,350 CU STR,4-1/8IN CONNECTOR, HYLINK, 350 MCM, COPPER, 4-1/8IN LONG. CITY OF TACOMA Page 27 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date Material # Manf Part# Manufacturer Name 10003786 C350 HOMAC 10003788 YS31 BURNDY 10003787 BB-CU-035 PENN-UNION

990 22167 275 EA SPLICE,477 AAC - 477 AAC,AUTO CONNECTOR, WIRE, AUTOMATIC COMPRESSION, 477 KCM TO 477 KCM AAC, SPLICE. ********************* NOT ACCEPTABLE: RELIABLE ********************* Material # Manf Part# Manufacturer Name 10005672 7659 MACLEAN 10005670 GL-412 FARGO

1000 20912 500 EA SPLICE,6M GUY,AUTO SPLICE, AUTOMATIC, GUY WIRE, 6M Material # Manf Part# Manufacturer Name 10009101 5040 MACLEAN 10009100 GLS5040 HUBBELL

1010 51443 25 EA SPLICE,750 KCM CU,COMP SPLICE, 750 KCM COPPER COMPRESSION, 600 VOLTS TO 35kV, STANDARD BARREL, TIN PLATED COPPER, CABLE STOP IN CENTER OF CONNECTOR, CHAMFERED ENDS. OVERALL LENGTH BETWEEN: 3.375 & 3.72 IN LONG. Material # Manf Part# Manufacturer Name 10007117 CT-750 MAC PRODUCTS 10007115 10019 3M 10007114 YS39L BURNDY

1020 22189 20 EA SPLICE,795 AAC,AUTO COMPRESSION CONNECTOR, WIRE, AUTOMATIC COMPRESSION, 795 KCM AAC TO 795 KCM AAC, SPLICE, ORANGE.# Material # Manf Part# Manufacturer Name 22189 GL-1385A FARGO CITY OF TACOMA Page 28 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date

1030 63026 10,000 EA STAPLE,2IN,BARBED,FOR PNUEMATIC STAPLER STAPLE, 2 INCH BARBED, GALVANIZED, PAPER COLLATED. FOR USE IN PNUEMATIC FENCE STAPLER. STANDARD PACK IS 1000. *** NO SUBSTITUTE *** Material # Manf Part# Manufacturer Name 63026 A12635 STOCKADE

1040 35002 1,150 LB STAPLES,1-1/2IN OR 1-3/4IN LONG,GALV STAPLE, HOT DIPPED GALVANIZED, 1-1/2IN OR 1-3/4IN LONG, 72 PER LB OF THE 1-1/2IN, 65 PER LB OF THE 1-3/4IN. Material # Manf Part# Manufacturer Name 10002898 1672 G MACLEAN 10002899 CG1525K REDMORE

1050 35214 797 BX STAPLES,T-59,RG-6,BLACK STAPLES, RG-6, INSULATED, BLACK, FOR USE IN THE ARROW T-59 STAPLE GUN. PACKAGED 300 PER BOX Material # Manf Part# Manufacturer Name 10003427 591189BL ARROW

1060 21896 5,000 FT STRAND,1/4IN,STEEL,GALV STRAND, STEEL GALVANIZED 1/4 INCH. 5,000 FEET PER ROLL, EXTRA HIGH STRENGTH, MINIMUM STRENGTH 6,650 LBS, 121 LBS PER 1000 FOOT. Material # Manf Part# Manufacturer Name 21896 14EHS7A-5000 (EHSA 7X0800L) NATIONAL STRAND

1070 73263 100 EA STRAP, RUBBER, 12 INCH STRAP, RUBBER, 12 INCHES IN LENGTH WITH ROUND BUTTON TYPE FASTENER. BULK PACKAGING. Material # Manf Part# Manufacturer Name 73263 912BKRHYLHI STAR TECH INTERNATIONAL CITY OF TACOMA Page 29 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 1080 20917 100 EA STRAP,1/2IN,PIPE,CAST AL STRAP, PIPE, ONE-HOLE 1/2IN CAST ALUMINUM Material # Manf Part# Manufacturer Name 20917 1276AL THOMAS & BETTS

1090 20919 50 EA STRAP,1IN,PIPE,CAST AL STRAP, PIPE, ONE-HOLE 1 IN CAST ALUMINUM# Material # Manf Part# Manufacturer Name 20919 1278AL THOMAS & BETTS

1100 20922 30 EA STRAP,2IN,PIPE,CAST AL STRAP, PIPE, ONE-HOLE, 2 INCH CAST ALUMINUM Material # Manf Part# Manufacturer Name 20922 1281AL THOMAS & BETTS

1110 20924 25 EA STRAP,3/4IN,PIPE,2-HOLE,STAMPED STEEL STRAP, PIPE, TWO-HOLE 3/4IN STAMPED STEEL, 4 LBS PER 100. Material # Manf Part# Manufacturer Name 20924 HS-902 STEEL CITY

1120 58538 250 EA STRAP,GROUND GUARD,GALVANIZED STRAP, GROUND GUARD, 2-HOLE, FOR 1-1/8" STEEL CABLE GUARD, HOT DIPPED GALVANIZED. *** NO SUBSTITUTE *** Material # Manf Part# Manufacturer Name 58538 J995 MACLEAN

1130 65163 12 EA STRIPPER,FLOOR,HEAVY DUTY,FOAM SPRAY STRIPPER, FLOOR, HEAVY DUTY FOAM SPRAY. FAST ACTING FOAM STRIPPER FOR SPOT BUILD UP'S. 23 OZ AEROSOL CAN. *** NO SUBSTITUTE *** Material # Manf Part# Manufacturer Name 65163 4640 SC JOHNSON CITY OF TACOMA Page 30 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 1140 22002 25 EA STUD,1IN BALL,GRD,3IN SHANK,BRONZE STUD, GROUNDING, 3IN SHANK LENGTH, 1IN BALL, BRONZE ALLOY, TIN PLATED, 1/2-13 UNC X 2IN THREAD, 43,000 AMP - 15 CYCLE/30,000 AMP - 30 CYCLE FAULT CURRENT RATING. Material # Manf Part# Manufacturer Name 22002 T600-2364 CHANCE

1150 20994 700 EA TAG,1-1/2IN DIA,20 GA,AL,BLANK TAG, ALUMINUM BLANK, ROUND, 1-1/2" DIAMETER, WITH ONE 3/16" HOLE, 20 GAUGE MATERIAL. PACKAGED IN BUNDLES OF 100 Material # Manf Part# Manufacturer Name 10010154 99206475 FASTENAL 10010153 41856 C.H. HANSON COMPANY

1160 58320 2,895 EA TAG,GROUND WIRE,ORANGE TAG, GROUND WIRE. .035 Orange PE2Print HDPE, 4 IN W X 3 IN H, WITH 2, 1/4IN PUNCHED HOLES. MUST SAY: "THIS WIRE IS STEEL NOT COPPER. IT HAS NO SCRAP VALUE". MUST ALSO INCLUDE TACOMA POWER'S LOGO. THE ARTWORK MUST BE APPROVED BEFORE PURCHASE IS APPROVED. MANUFACTURER MUST CONTACT TACOMA POWER WAREHOUSE FOR SPECIFICATIONS AND DRAWING.

1170 21928 40 EA TAP,4 PORT 7DB,DIST COAX TAP, DISTRIBUTION, COAXIAL, 4 PORT, 7 DB. *** NO SUBSTITUTE *** Material # Manf Part# Manufacturer Name 21928 FFT47TQ ARRIS SOLUTIONS

1180 63351 24 RO TAPE,1" X 450",OUTDOOR MOUNTING TAPE, OUTDOOR MOUNTING. 1" X 450" ROLL. HOLDS 5 LBS. WORKS ON ALL SURFACES Material # Manf Part# Manufacturer Name 63351 411-LONG/DC 3M CITY OF TACOMA Page 31 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date

1190 21074 430 RO TAPE,3/8IN,VINYL,RED TAPE, VINYL, 3/8IN X 12FT, ROLL TYPE, RED Material # Manf Part# Manufacturer Name 21074 520102 DYMO

1200 35051 750 EA TUBING,1.2IN X 12IN,HEAT SHRINK TUBING,HEAT SHRINKABLE, 12IN LONG, LARGE TYPE, MAXIMUM EXPANDED WALL THICKNESS .08, ADHESIVE THICKNESS .020, MINIMUM EXPANDED I.D.-1.2IN., MAXIMUM RECOVERED I.D.-.045IN. ++++++++++++++++++++++++++++++++++++ NOT ACCEPTABLE: 3M #ITCSN-1500-12 ++++++++++++++++++++++++++++++++++++ Material # Manf Part# Manufacturer Name 10003048 WCSM-34/8-300-S RAYCHEM 10003047 ITCSN-1100-12,W/SEALANT 3M 10003046 CFM-1300-12D CANUSA

1210 53144 19 RO TUBING,1/2IN X 25FT,HEAT SHRINK,CLEAR TUBING, HEAT SHRINK - THIN WALL, CLEAR, 1/2 INCH DIAMETER, 2 MM THICK, 25 FOOT SPOOL, 2:1 SHRINK RATIO, MINIMUM SHRINK TEMP>90 DEGREE C, MEET UL STANDARD 224 CLASS 2 & 3. Material # Manf Part# Manufacturer Name 10007390 HSC12T300PF BURNDY 10007391 HSTT50-QC PANDUIT

1220 52962 12 RO TUBING,1IN X 25FT,HEAT SHRINK,CLEAR TUBING, HEAT SHRINK - THIN WALL, CLEAR, 1 INCH DIAMETER, 1 MM THICK, 25 FOOT SPOOL, 2:1 SHRINK RATIO, MINIMUM SHRINK TEMP>90 DEGREE C, MEET UL STANDARD 224 CLASS 2 & 3. Material # Manf Part# Manufacturer Name 10007375 HSC100T300PF BURNDY 10007374 47-11025-CL NTE CITY OF TACOMA Page 32 of 33 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047035

Item # Material# Delivery QTY UM Net Price Total Description Date 1230 63991 30 EA TUBING,1IN X 48IN,HEAT SHRINK,CLEAR TUBING, 1IN X 48IN, HEAT SHRINK,CLEAR, DUAL WALL POLYOLEFIN WITH ADHESIVE. Material # Manf Part# Manufacturer Name 63991 47-23648-CL NTE

1240 35052 46 EA TUBING,3/4IN X 12IN,HEAT SHRINK TUBING, HEAT SHRINKABLE, 12IN LONG, SMALL TYPE, WALL THICKNESS .060, ADHESIVE THICKNESS .020, MINIMUM EXPANDED I.D. 0.75IN, MAXIMUM RECOVERED I.D. 0.4IN Material # Manf Part# Manufacturer Name 10003050 CFM 750-12-D CANUSA 10003049 ITCSN-0800-12, W. SEALANT 3M 10003051 WCSM 20/6-300-S RAYCHEM

1250 53180 25 RO TUBING,3/4IN X 25FT,HEAT SHRINK,CLEAR TUBING, HEAT SHRINK - THIN WALL, CLEAR, 3/4 INCH DIAMETER, 2 MM THICK, 25 FOOT SPOOL, 2:1 SHRINK RATIO, MINIMUM SHRINK TEMP>90 DEGREE C, MEET UL STANDARD 224 CLASS 2 & 3. Material # Manf Part# Manufacturer Name 10007378 HSTT75-QC PANDUIT 10007377 47-10925-CL NTE 10007376 HSC34T300PF BURNDY

1260 67542 50 EA VALVE,BALL,BRASS,1/4IN FNPR-MNPT BALL VALVE, BRASS, INLINE, CONNECTION TYPE: FNPT-MNPT, 1/4IN X 1/4 IN. Material # Manf Part# Manufacturer Name 67542 1WMN7 GRAINGER

1270 21240 90 EA WIRE,.038IN,LASHING,SS,6-1/2 LB COILS WIRE, LASHING, STAINLESS STEEL, .038IN, 6-1/2LB COILS, TYPE 302, STRAIGHT HUB REEL

Net Value $ Plus Tax at ______% $

Total Amount $ CITY OF TACOMA Page 1 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

SCHEDULE 2

Item # Material# Delivery QTY UM Net Price Total Description Date

10 35581 110 EA VALVE,1/4IN,BALL,BRASS,FULL PORT VALVE, BALL, BRASS, 1/4", FULL PORT, TWO PIECE BODY, CHROME PLATED SOLID BRASS BALL, PTFE SEATS AND SEALS, FEMALE NPT INLET AND OUTLET ANSI B2.1, 600 PSI WOG RATING, BLOW OUT PROOF STEM, APPROVED BY NSF, FM, UL LISTED.

MUST MEET NSF/ANSI 61-8, ANNEX G AND NSF/ANSI 372 LEAD FREE CITY OF TACOMA Page 2 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 20 31828 11 EA VALVE,12IN,BUTTERFLY,MJ X MJ VALVE, BUTTERFLY, 12IN, MECHANICAL JOINT X MECHANICAL JOINT, 2" SQUARE OPERATING NUT, OPERATING LEFT TO OPEN. THE VALVE IS FOR UNDERGROUND SERVICE, "MJ" PER AWWA STANDARD C-111/A21.1. THE VALVE SHALL BE PROVIDED COMPLETE WITH GLANDS GASKETS AND BOLTS AND MEET THE REQUIREMENTS OF AWWA STANDARD C-504-94, CLASS 150B OR THE LATEST REVISION THEREOF.

Material provided under this specification must be manufactured within two years of the date of the purchase order unless prior approval is obtained from Tacoma Water.

APPROVED HENRY PRATT "GROUND HOG" MUELLER "LINESEAL III" M&H/KENNEDY/CLOW 4500

****************************************************** NOT ACCEPTABLE: DEZURICK BF VALVE ******************************************************

30 31842 27 EA VALVE,2-1/2IN IPT,GATE,BRASS VALVE, GATE, BRONZE, 2 1/2 INCH IPT THREADED, SCREWED BONNET NON-RISING STEM, 125 LB.

BRASS COMPONENTS THAT CONTACT WATER MUST MEET NSF/ANSI 372, AND IDENTIFIED AS SUCH ON THE PRODUCT.

NOT ACCEPTABLE: KITZ STYLE AKFS #07 CITY OF TACOMA Page 3 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 40 35583 140 EA VALVE,3/4IN,BALL,BRASS,FULL PORT VALVE, BALL, BRASS, 3/4", FULL PORT, TWO PIECE BODY, CHROME PLATED SOLID BRASS BALL, PTFE SEATS AND SEALS, FEMALE NPT INLET AND OUTLET ANSI B2.1, 600 PSI WOG RATING, BLOW OUT PROOF STEM, APPROVED BY NSF, FM, UL LISTED.

Approved: MATCO-NORCA 757T RED-WHITE 5044F APOLLO 64 SERIES WATTS FBV 3C

Material # Manf Part# Manufacturer Name 10004481 64 SERIES APOLLO 10004477 FBV 3C WATTS 10004478 5044F RED-WHITE 10008497 757T MATCO-NORCA

50 31814 72 EA VALVE,3/4IN IPT,CHECK,SWING,BRONZE,HORIZ VALVE CHECK SWING BRONZE 3/4IN NPTxNPT, WYE PATTERN BODY, CLASS 150, BRASS/BRONZE SEAT AND DISC, SCREWED BRONZE CAP, STAINLESS STEEL HINGE PIN. MUST MEET NSF/ANSI 61-8, ANNEX G AND NSF/ANSI 372 LEAD FREE

APPROVED: APOLLO 3/4IN PART NUMBER 61YLF-194-01

OR APPROVED EQUAL Material # Manf Part# Manufacturer Name 10010610 61YLF-194-01 APOLLO CITY OF TACOMA Page 4 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 60 31853 26 EA VALVE,3/4IN,PRES RED,W/STRAINER VALVE, WATER PRESSURE REDUCING, W/STRAINER, 3/4IN. FOR SUPPLY MAIN PRESSURES UP TO 300 LBS.

BRASS COMPONENTS THAT POTABLE WATER MUST MEET NSF/ANSI 372, AND IDENTIFIED AS SUCH ON THE PRODUCT.

APPROVED: WATTS REGULATOR NO. LF25AUB-Z3 CITY OF TACOMA Page 5 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 70 32257 36 EA VALVE,4IN,CHECK,FIRE/DC,UL/FM APPR VALVE, CHECK, (FIRE/DETECTOR CHECK), 4IN, UNDERWRITER LABORATORIES INC.(UL)LISTED AND FACTORY MUTUAL LABORATORIES (FM) APPROVED. EACH VALVE SHALL CARRY THE SEAL OF APPROVAL OR BE ACCOMPANIED BY A CERTIFICATION OF APPROVAL OF THE ABOVE NAMED LABORATORIES. THE VALVE SHALL HAVE FLANGED ENDS. THE CASES AND COVERS SHALL BE BRONZE, CAST IRON OR DUCTILE IRON. THE CAST AND DUCTILE IRON CASES AND COVERS SHALL BE EPOXY COATED WITH UNIFORM COATING OF NOT LESS THAN 0.003 INCHES.THE COATING SHALL BE APPLIED AFTER ALL MACHINE OPERATIONS HAVE BEEN COMPLETED AND BEFORE THREAD TAPPING. THE CHECK VALVE CASE SHALL BE TAPPED ON BOTH SIDES OF THE VALVE BODY TO ALLOW FOR THE INSTALLATION OF A DETECTOR METER OR BY-PASSING AROUND THE VALVE SEAT AND CLAPPER. THE TAPPING SHALL BE 3/4 INCH, STANDARD IRON PIPE THREAD ON BOTH SIDES OF THE VALVE BODY. ALL TAPPED OUTLETS SHALL HAVE PLUGS WITH SQUARE HEADS MADE OF CAST IRON, DUCTILE IRON OR BRONZE.THE VALVE SHALL BE USED USE ON COMMERCIAL FIRE PROTECTION SYSTEMS.SUPPLIED WITHOUT DETECTOR METER.

APPROVED: HERSEY PRODUCTS, INC (MUELLER COMPANY), MODEL EDC IV FEBCO, MODEL 800

******************** Not Acceptable: Ames, MATCO-NORCA ******************** CITY OF TACOMA Page 6 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 80 35523 86 EA VALVE,4IN,GATE,FLNG X FLNG,CLASS 125 GATE, 4 INCH, VALVE, FLANGE X FLANGE, CAST IRON, WITH 2 INCH OPERATING NUT WHICH OPERATES LEFT TO OPEN (COUNTER CLOCK WISE), NON RISING STEM, UL LISTED AND FM APPROVED VALVES SHALL CONFORM TO THE LATEST REVISION OF AWWA C515 AND AWWA C550. FLANGED ENDS SHALL CONFORM TO C110/A21.10, (ANSI B16.1, CLASS 125)

Material provided under this specification must be manufactured within two years of the date of the purchase order unless prior approval is obtained from Tacoma Water.

Material # Manf Part# Manufacturer Name 10004297 RS CLOW VALVE CO 10004302 STYLE 2360 MUELLER 10004301 METROSEAL 250 US PIPE 10004300 STYLE 4067 M&H 10004299 MODEL RWGV-96 KENNEDY 10005654 MODEL NO. 25-100-40 AVK International 10009949 SERIES 2500 AMERICAN FLOW CONTROL 10009021 FLOW MASTER EAST JORDAN IRON WORKS 10005655 F619RWSON NIBCO CITY OF TACOMA Page 7 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 90 36365 15 EA VALVE,4IN,GATE,MJ X MJ **** GATE,VALVE, MJ X MJ, 4IN, CAST IRON, WITH 2" OPERATING NUT WHICH OPERATES LEFT TO OPEN (COUNTER CLOCK WISE), NON RISING STEM, UL LISTED AND FM APPROVED, VALVES SHALL CONFORM TO THE LATEST C515 AND AWWA C550. FLANGED ENDS SHALL CONFORM TO REVISION OF AWWA C110/A21.10, (ANSI B16.1, CLASS 125)

Material provided under this specification must be manufactured within two years of the date of the purchase order unless prior approval is obtained from Tacoma Water.

APPROVED: AMERICAN FLOW SERIES 2500, CLOW MODEL RS, KENNEDY MODEL RWGV-96, M&H STYLE 4067, MUELLER STYLE 2360, US PIPE METROSEAL 250, AVK MODEL NO. 25-100-00 EAST JORDAN IRON WORKS "FLOW MASTER"

**************************************************** NOT ACCEPTABLE: AMERICAN DARLING **************************************************** CITY OF TACOMA Page 8 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 100 31103 64 EA VALVE,4IN,GATE,TAP,FLNG INLET X MJ,CI, VALVE, GATE, TAPPING 4". FLANGED INLET X MECHANICAL JOINT OUTLET, CAST IRON, WITH 2 IN. OPERATING NUT WHICH OPERATES LEFT TO OPEN(COUNTER CLOCK WISE), NON RISING "O" RING SEALED STEM, MUST HAVE SQUARE HEAD TEST PLUG ON BONNET, UL LISTED AND FM APPROVED, SUPPLY BOLTS AND GASKET FOR FLANGED END ONLY. VALVES SHALL CONFORM TO THE LATEST REVISION OF AWWA C500, C111 AND C110 OR C515 AND C550. FLANGED ENDS SHALL CONFORM TO C110/A21.10. (ANSI B16.1, CLASS 125).

MATERIAL PROVIDED UNDER THIS SPECIFICATION MUST BE MANUFACTURED WITHIN TWO YEARS OF THE DATE OF THE PURCHASE ORDER UNLESS PRIOR APPROVAL IS OBTAINED FROM TACOMA WATER.

Material # Manf Part# Manufacturer Name 10009032 FLOW MASTER EAST JORDAN IRON WORKS 10008805 STYLE T-2360-19 MUELLER 10008803 MODEL 8950 KENNEDY 10008802 STYLE 4751-01 M&H 10008801 MODEL F6114 CLOW VALVE CO 10008800 SERIES 2500 AMERICAN FLOW CONTROL CITY OF TACOMA Page 9 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 110 36367 64 EA VALVE,6IN, GATE, MJ X MJ **** GATE,VALVE,MECH. JOINT X MECH. JOINT, 6IN, CAST IRON, " WITH 2IN OPERATING NUT WHICH OPERATES LEFT TO " OPEN (COUNTER CLOCK WISE), NON RISING STEM, UL LISTED AND FM APPROVED, VALVES SHALL CONFORM TO THE LATEST C515 AND AWWA C550. SHALL CONFORM TO REVISION OF AWWA C110/A21.10, (ANSI B16.1, CLASS 125)

Material provided under this specification must be manufactured within two years of the date of the purchase order unless prior approval is obtained from Tacoma Water.

APPROVED: AMERICAN FLOW SERIES 2500 CLOW MODEL RS KENNEDY MODEL RWGV-96 M&H STYLE 4067 MUELLER STYLE 2360 US PIPE METROSEAL 250 AVK MODEL NO. 25-150-00 EAST JORDAN IRON WORKS "FLOW MASTER" CITY OF TACOMA Page 10 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 120 32258 30 EA VALVE,6IN,CHECK,FIRE/DC,UL/FM APPR VALVE, CHECK, (FIRE/DETECTOR CHECK), 6IN, UNDERWRITER LABORATORIES INC.(UL)LISTED AND FACTORY MUTUAL LABORATORIES (FM) APPROVED. EACH VALVE SHALL CARRY THE SEAL OF APPROVAL OR BE ACCOMPANIED BY A CERTIFICATION OF APPROVAL OF THE ABOVE NAMED LABORATORIES. THE VALVE SHALL HAVE FLANGED ENDS. THE CASES AND COVERS SHALL BE BRONZE, CAST IRON OR DUCTILE IRON. THE CAST AND DUCTILE IRON CASES AND COVERS SHALL BE EPOXY COATED WITH UNIFORM COATING OF NOT LESS THAN 0.003 INCHES.THE COATING SHALL BE APPLIED AFTER ALL MACHINE OPERATIONS HAVE BEEN COMPLETED AND BEFORE THREAD TAPPING. THE CHECK VALVE CASE SHALL BE TAPPED ON BOTH SIDES OF THE VALVE BODY TO ALLOW FOR THE INSTALLATION OF A DETECTOR METER OR BY-PASSING AROUND THE VALVE SEAT AND CLAPPER. THE TAPPING SHALL BE 3/4 INCH, STANDARD IRON PIPE THREAD ON BOTH SIDES OF THE VALVE BODY. ALL TAPPED OUTLETS SHALL HAVE PLUGS WITH SQUARE HEADS MADE OF CAST IRON, DUCTILE IRON OR BRONZE.THE VALVE SHALL BE USED USE ON COMMERCIAL FIRE PROTECTION SYSTEMS.SUPPLIED WITHOUT DETECTOR METER.

APPROVED: HERSEY PRODUCTS, INC (MUELLER COMPANY), MODEL EDC IV FEBCO, MODEL 800

******************** Not Acceptable: Ames, MATCO-NORCA ******************** CITY OF TACOMA Page 11 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 130 35524 30 EA VALVE,6IN,GATE,FLNG X FLNG,CLASS 125 GATE, VALVE, FLANGE X FLANGE, 6 INCH, CAST IRON, WITH 2 INCH OPERATING NUT WHICH OPERATES LEFT TO OPEN (COUNTER CLOCK WISE), NON RISING STEM, UL LISTED AND FM APPROVED VALVES SHALL CONFORM TO THE LATEST REVISION OF AWWA C515 AND AWWA C550. FLANGED ENDS SHALL CONFORM TO C110/A21.10, (ANSI B16.1, CLASS 125)

Material provided under this specification must be manufactured within two years of the date of the purchase order unless prior approval is obtained from Tacoma Water.

Material # Manf Part# Manufacturer Name 10004308 MODEL RS CLOW VALVE CO 10004307 MODEL RWGV-96 KENNEDY 10004306 STYLE 4067 M&H 10004305 STYLE 2360 MUELLER 10004304 METROSEAL 250 US PIPE 10009952 SERIES 2500 AMERICAN FLOW CONTROL 10009022 FLOW MASTER EAST JORDAN IRON WORKS 10006811 25-150-40 AVK International CITY OF TACOMA Page 12 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 140 31104 36 EA VALVE,6IN,GATE,TAP,FLNG INLET X MJ VALVE, GATE, TAPPING 6IN, FLANGED INLET X MECHANICAL JOINT OUTLET, CAST IRON, WITH 2IN OPERATING NUT WHICH OPERATES LEFT TO OPEN(COUNTER CLOCK WISE), NON RISING "O" RING SEALED STEM, MUST HAVE SQUARE HEAD TEST PLUG ON BONNET, UL LISTED AND FM APPROVED, SUPPLY BOLTS AND GASKET FOR FLANGED END ONLY. VALVES SHALL CONFORM TO THE LATEST REVISION OF AWWA C500, C111 AND C110 OR C515 AND C550. FLANGED ENDS SHALL CONFROM TO C110/A21.10. (ANSI B16.1, CLASS 125).

MATERIAL PROVIDED UNDER THIS SPECIFICATION MUST BE MANUFACTURED WITHIN TWO YEARS OF THE DATE OF THE PURCHASE ORDER UNLESS PRIOR APPROVAL IS OBTAINED FROM TACOMA WATER.

APPROVED: AMERICAN FLOW CONTROL SERIES 2500 CLOW MODEL F6114 M & H STYLE 4751-01 KENNEDY MODEL 8950 MUELLER STYLE T-2360-19 EAST JORDAN IRON WORKS "FLOW MASTER" CITY OF TACOMA Page 13 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 150 36368 16 EA VALVE,8IN,GATE, MJ x MJ **** VALVE, GATE, MECHANICAL JOINT X MECHANICAL JOINT, 8 INCH, CAST IRON WITH 2 INCH OPERATING NUT WHICH OPERATES LEFT TO OPEN (COUNTER CLOCK WISE), NON RISING STEM, UL LISTED AND FM APPROVED, VALVES SHALL CONFORM TO THE LATEST C515 AND AWWA C110/A21.10, (ANSI B16.1,CLASS 125)

Material provided under this specification must be manufactured within two years of the date of the purchase order unless prior approval is obtained from Tacoma Water.

********************************* Not Acceptable: American Darling *********************************

Material # Manf Part# Manufacturer Name 10009942 SERIES 2500 AMERICAN FLOW CONTROL 10009026 FLOW MASTER EAST JORDAN IRON WORKS 10004936 METROSEAL 250 US PIPE 10004935 STYLE 2360 MUELLER 10004934 STYLE 4067 M&H 10004933 MODEL RWGV-96 KENNEDY 10004932 MODEL RS CLOW VALVE CO CITY OF TACOMA Page 14 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 160 32191 72 EA YOKE,1-1/2IN X 18IN X 13IN,METER YOKE, METER 1-1/2 IN X 18IN X 13IN. 1-1/2IN COPPER METER SETTER WITH FEMALE IRON PIPE, HORIZONTAL INLET AND OUTLET, ANGLE METER BALL VALVE INLET AND OUTLET AT THE METER, HIGH BY-PASS. MINIMUM 1 IN COPPER TUBE WITH LOCKING BALL VALVE. CENTER LINE OF HIGH BY-PASS TO BE OFF SET 6-1/2 TO 7-1/2 INCHES FROM THE CENTER LINE OF THE INLET AND OUTLET RISERS, AND 5 TO 8-1/2 INCHES BELOW THE CENTER LINE OF METER FLANGES. ALL BALL VALVES MUST HAVE PAD LOCK WINGS. ALL MATERIALS USED IN THE CONSTRUCTION OF THE SETTERS SHALL CONFORM TO THE APPLICABLE SECTIONS OF THE LATEST REVISION OF AWWA STANDARD C-800.

BRASS COMPONENTS THAT CONTACT POTABLE WATER MUST MEET ANSI/AWWA C800 AND NSF/ANSI 372, AND IDENTIFIED WITH "NL" ON THE PRODUCT. BRASS COMPONENTS THAT DO NOT CONTACT POTABLE WATER MUST MEET AWWA/ANSI C800 AND MAY BE MANUFACTURED WITH 85-5-5-5 BRASS, UNS NO C83600.

APPROVED: FORD VBB-76-18HB-11-66NL MUELLER 098B2423----00N A Y MCDONALD 720R618JJFF666 JAMES JONES J02FIPFIPBVBV18 OR APPROVED EQUAL.

Material # Manf Part# Manufacturer Name 10007039 720R618JJFF666 A.Y. MCDONALD 10005988 098B2423----00N MUELLER 10007066 J02EFIPFIPBVBV18 JAMES JONES CITY OF TACOMA Page 15 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 10007038 VBB76-18HB-11-66NL FORD METER BOX CO

170 35604 150 EA YOKE,1IN X 21IN,METER,WITH TIEBAR YOKE, METER SETTER, 1 INCH X 21 INCH H, WITH TIE BAR, FULL PORT ANGLE BALL VALVE INLET WITH PADLOCK WINGS, "KEY" STYLE OPERATING NUT WITH FLOW DIRECTION INDICATOR CAST IN TOP, METER SWIVEL NUTS SHALL HAVE A LIP TO SUPPORT THE METER DURING INSTALLATION, DOUBLE PURPOSE UNION ON THE INLET AND OUTLET, MINUS THE DOUBLE PURPOSE NUT, SUPPLIED WITH THREAD PROTECTION. RUBBER GASKETS MUST BE PROVIDED. ALL MATERIALS USED IN THE CONSTRUCTION OF THE METER SETTERS AND YOKES, RESETTERS, INSETTERS AND HORNS SHALL BE NEW AND CONFORM TO THE APPLICABLE SECTIONS OF THE LATEST REVISION OF AWWA STANDARD C800.

Material # Manf Part# Manufacturer Name 10004530 VB74-21W-11-44-FP-LDPNL FORD METER BOX CO 10004529 720-421JXLL A.Y. MCDONALD 10007062 J02CUNUNBVMC21 JAMES JONES 10005981 1X21 B2404N MUELLER 10005290 393B2404N MUELLER CITY OF TACOMA Page 16 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 180 32192 150 EA YOKE,2IN X 18IN X 17IN,METER YOKE, METER, 2 INCH X 18 INCH X 17 INCH, 2 INCH COPPER METER SETTER WITH FEMALE IRON PIPE, HORIZONTAL INLET AND OUTLET, FULL PORT ANGLE METER BALL VALVE INLET AND OUTLET AT THE METER, HIGH BY-PASS. MINIMUM 1 IN COPPER TUBE WITH LOCKING BALL VALVE. CENTER LINE OF HIGH BY-PASS TO BE OFF SET 6-1/2 TO 7-1/2 INCHES FROM THE CENTER LINE OF THE INLET AND OUTLET RISERS, AND 5 TO 8-1/2 INCHES BELOW THE CENTER LINE OF METER FLANGES. ALL BALL VALVES MUST HAVE PAD LOCK WINGS. ALL MATERIALS USED IN THE CONSTRUCTION OF THE SETTERS SHALL CONFORM TO THE APPLICABLE SECTIONS OF THE LATEST REVISION OF AWWA STANDARD C-800.

Material # Manf Part# Manufacturer Name 10007067 J02FFIPFIPBVBV18 JAMES JONES 10005987 106B2423----06N MUELLER 10006872 720R718JJFF775 A.Y. MCDONALD 10006871 VBB77-18HB-11-77NL FORD METER BOX CO CITY OF TACOMA Page 17 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 190 32184 350 EA YOKE,3/4IN X 21IN,METER,WITH TIEBAR YOKE,METER SETTER, 3/4" X 21" H, WITH TIE BAR,FULL PORT ANGLE BALL VALVE INLET WITH PADLOCK WINGS, "KEY" STYLE OPERATING NUT WITH FLOW DIRECTION INDICATOR CAST IN TOP METER SWIVEL NUTS SHALL HAVE A LIP TO SUPPORT THE METER DURING INSTALLATION, DOUBLE PURPOSE UNION ON THE INLET AND OUTLET, MINUS THE DOUBLE PURPOSE NUT, SUPPLIED WITH THREAD PROTECTION. RUBBER GASKETS MUST BE PROVIDED. ALL MATERIALS USED IN THE CONSTRUCTION OF THE METER SETTERS AND YOKES, RESETTERS, INSETTERS AND HORNS SHALL BE NEW AND CONFORM TO THE APPLICABLE SECTIONS OF THE REVISION OF AWWA STANDARD C800.

APPROVED: FORD VB73-21W-11-33-FP-LDP-NL MUELLER 3/4X21 B2404 MCDONALD #20-321JXLL JAMES JONES J02BUNUNBVMC21

NO SUBSTITUTIONS Material # Manf Part# Manufacturer Name 10006730 720-321JXLL A.Y. MCDONALD 10007063 J02BUNUNBVMC21 JAMES JONES 10006422 VB73-21W-11-33-FP-LDP-NL FORD METER BOX CO 10005980 3/4X21 B2404N MUELLER CITY OF TACOMA Page 18 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 200 35602 100 EA YOKE,5/8IN X 3/4IN X 12IN,RESETTER YOKE, RESETTER, 5/8 INCH X 3/4 INCH X 12 INCH H, FOR 5/8X3/4 IN METERS, FULL PORT BALL VALVE ON METER INLET, METER SWIVEL NUT OUTLET. ALL MATERIALS USED IN THE CONSTRUCTION OF THE RESETTERS SHALL BE NEW AND CONFORM TO THE APPLICABLE SECTIONS OF THE LATEST REVISION OF AWWA STANDARD C800.

Material # Manf Part# Manufacturer Name 10004525 718-212JX A.Y. MCDONALD 10004526 VB42-12W-FP-NL FORD METER BOX CO 10005963 5/8X3/4X12B-24118N MUELLER CITY OF TACOMA Page 19 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 210 35598 3,500 EA YOKE,5/8IN X 3/4IN X 21IN,METER YOKE, METER SETTER, 5/8 INCH X 3/4 INCH X 21 INCH H, WITH TIE BAR, FULL PORT ANGLE BALL VALVE INLET WITH PADLOCK WINGS, "KEY" STYLE OPERATING NUT WITH FLOW DIRECTION INDICATOR CAST IN TOP, METER SWIVEL NUTS SHALL HAVE A LIP TO SUPPORT THE METER DURING INSTALLATION, DOUBLE PURPOSE UNION ON THE INLET AND OUTLET, MINUS THE DOUBLE PURPOSE NUT, SUPPLIED WITH THREAD PROTECTION. RUBBER GASKETS MUST BE PROVIDED. ALL MATERIALS USED IN THE CONSTRUCTION OF THE METER SETTERS AND YOKES, RESETTERS, INSETTERS AND HORNS SHALL BE NEW AND CONFORM TO THE APPLICABLE SECTIONS OF THE LATEST REVISION OF AWWA STANDARD C800.

Material # Manf Part# Manufacturer Name 10004518 VB72-21W-11-33-FP-LDP-NL FORD METER BOX CO 10004517 720-221JXLL33 A.Y. MCDONALD 10006876 J02AUNUNBVMC21 JAMES JONES 10005940 5/8X3/4X21 B2404N MUELLER CITY OF TACOMA Page 20 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 220 35600 370 EA YOKE,5/8IN X 3/4IN X 7IN,RESETTER YOKE, RESETTER, 5/8 INCH X 3/4 INCH X 7 INCH H, FOR 5/8X3/4 IN METERS, FULL PORT BALL VALVE ON METER INLET, METER SWIVEL NUT OUTLET. ALL MATERIALS USED IN THE CONSTRUCTION OF THE RESETTERS SHALL BE NEW AND CONFORM TO THE APPLICABLE SECTIONS OF THE LATEST REVISION OF AWWA STANDARD C800.

Material # Manf Part# Manufacturer Name 10004522 VB427WNL FORD METER BOX CO 10004521 718-207JX A.Y. MCDONALD 10006878 J03ABVMC7 JAMES JONES 10005960 5/8X3/4X7B-24118N MUELLER CITY OF TACOMA Page 21 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 230 35601 120 EA YOKE,5/8IN X 3/4IN X 9IN,RESETTER YOKE, RESETTER, 5/8 INCH X 3/4 INCH X 9 INCH H, FOR 5/8X3/4 IN METERS, FULL PORT BALL VALVE ON METER INLET, METER SWIVEL NUT OUTLET. , ALL MATERIALS USED IN THE CONSTRUCTION OF THE RESETTERS SHALL BE NEW AND CONFORM TO THE APPLICABLE SECTIONS OF THE LATEST REVISION OF AWWA STANDARD C800.

Material # Manf Part# Manufacturer Name 10004523 718-209JX A.Y. MCDONALD 10004524 VB429WNL FORD METER BOX CO 10006879 J03ABVMC9 JAMES JONES 10005961 5/8X3/4X9B-24118N MUELLER CITY OF TACOMA Page 22 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 240 58255 12 EA YOKE,RESETTER,3/4IN X 8IN HEIGHT YOKE, RESETTER, 3/4 INCH X 8 INCH HEIGHT, FOR 3/4 INCH METERS WITH 9-IN LAY LENGTH, FULL PORT BALL VALVE ON METER INLET, METER SWIVEL NUT OUTLET. ALL MATERIALS USED IN THE CONSTRUCTION OF THE RESETTERS SHALL BE NEW AND CONFORM TO THE APPLICABLE SECTIONS OF THE LATEST REVISION OF AWWA STANDARD C800.

Approved: FORD VB43-8W AY McDonald 718D308JX Mueller 3/4x8 B-24118

Material # Manf Part# Manufacturer Name 10008632 3/4X8 B-24118N MUELLER 10008630 VB43-8WNL FORD METER BOX CO 10008631 718D308JX A.Y. MCDONALD CITY OF TACOMA Page 23 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 250 35582 30 EA VALVE,3/8IN,BALL,BRASS,FULL PORT VALVE, BALL, BRASS, 3/8", FULL PORT, TWO PIECE BODY, CHROME PLATED SOLID BRASS BALL, PTFE SEATS AND SEALS, FEMALE NPT INLET AND OUTLET ANSI B2.1, 600 PSI WOG RATING, BLOW OUT PROOF STEM, APPROVED BY NSF, FM, UL LISTED.

MUST MEET NSF/ANSI 61-8, ANNEX G AND NSF/ANSI 372 LEAD FREE

260 31301 20 BX NAIL,5/32IN X 1IN,MAG,100/BX MAG, NAIL, 5/32" X 1", 100/PK. APPROVED: MAG NAIL

************************************************* NOT ACCEPTABLE: BLACK IN COLOR, PHILSTONE *************************************************

270 30674 400 FT CHAIN,3/8IN,HIGH TEST,200FT LENGTH CHAIN, HIGH TEST, 3/8", IN 200 FT LENGTHS NOT ACCEPTABLE: SCC#

280 33886 20 EA SHACKLE,1/2IN,ANCHOR,W/SCREW PIN,GALV SHACKLE, ANCHOR, GALV 1/2" WITH THREADED 5/8" PIN BOLT, CLEVIS TYPE, MINIMUM SAFE WORKING LOAD 2 TONS, MINIMUM AVERAGE BREAKING STRENGTH 24,000 LBS. SAFE WORKING LOAD AND MANUFACTURER'S NAME MUST BE IMPRINTED ON THE SHACKLE. Material # Manf Part# Manufacturer Name CITY OF TACOMA Page 24 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 10000134 WESTCO-1/2 WESTCO 10000133 G209-1/2 CROSBY

290 31600 20 EA SHACKLE,3/8IN,ANCHOR,W/SCREW PIN,GALV SHACKLE, ANCHOR, GALV 3/8" WITH THREADED 7/16" PIN BOLT, CLEVIS TYPE, MINIMUM SAFE WORKING LOAD 1 TON, MINIMUM AVERAGE BREAKING STRENGTH 12,0000 LBS. SAFE WORKING LOAD AND MANUFACTURER'S NAME MUST BE IMPRINTED ON THE SHACKLE. APPROVED: CROSBY-LAUGHLIN G209-3/8 WESTCO-3/8#

300 36402 16 EA SLEEVE,6IN,SOLID,MJ,DI **** SLEEVE, SOLID, 6 INCH, MECHANICAL JOINT, DUCTILE IRON, LONG PATTERN. C-D RANGE, 6.90IN-7.20IN, RANGE MUST BE INDICATED ON THE BODY OF FITTING. MUST COMPLY WITH THE LATEST REVISION OF THE ANSI/AWWA C-110. NO ACCESSORIES.

Material provided under this specification must be manufactured within two years of the date of the purchase order unless prior approval is obtained from Tacoma Water.

****************************** Not Acceptable: Union Foundry ****************************** CITY OF TACOMA Page 25 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 310 36409 15 EA SLEEVE,6IN,SPLIT,MJ,DUCTILE IRON **** SLEEVE, SPLIT-REPAIR, MECH. JOINT, 6INCH, DUCTILE IRON, COMPLETE WITH DUCTILE IRON GLANDS, GASKETS, CORTEN OR DUCTILE IRON NUTS AND BOLTS. CASTINGS MUST BE GROOVED SO THAT GASKETS REMAIN IN PLACE DURING INSTALLATION. RANGE 6.84 THROUGH 7.40 O.D.

Material provided under this specification must be manufactured within two years of the date of the purchase order unless prior approval is obtained from Tacoma Water.

APPROVED: MUELLER H785 W/EXTRA 195654 GASKET NO SUBSTITUTES NOT APPROVED: TYLER BRAND UNION FOUNDRY BRAND WATEROUS AT THIS TIME

320 36403 16 EA SLEEVE,8IN,SOLID,MJ,DI **** SLEEVE, SOLID. 8INCH MECHANICAL JOINT, DUCTILE IRON. LONG PATTERN. C-D RANGE. 9.05-9.35, RANGE MUST BE INDICATED ON THE BODY OF FITTING. MUST COMPLY WITH THE LATEST REVISION OF THE ANSI/AWWA C-110. NO ACCESSORIES.

Material provided under this specification must be manufactured within two years of the date of the purchase order unless prior approval is obtained from Tacoma Water.

APPROVED: TYLER UNION NOT ACCEPTABLE: SIGMA GRIFFIN CITY OF TACOMA Page 26 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 330 32144 26 EA PLUG,1/2IN,BRASS,IPT PLUG,BRASS, .5000 (1/2IN), IPT

MATERIAL PROVIDED UNDER THIS SPECIFICATION MUST MEET ANSI/AWWA C800 and NSF/ANSI 372 AND IDENTIFIED AS COMPLIANT.

340 32142 40 EA PLUG,1/4IN,BRASS,IPT PLUG,BRASS, .2500 (1/4IN), IPT

MATERIAL PROVIDED UNDER THIS SPECIFICATION MUST MEET ANSI/AWWA C800 and NSF/ANSI 372 AND IDENTIFIED AS COMPLIANT.

350 32146 39 EA PLUG,1IN,BRASS,IPS PLUG, BRASS, 1 INCH, IPS.

MATERIAL PROVIDED UNDER THIS SPECIFICATION MUST MEET ANSI/AWWA C800 and NSF/ANSI 372 AND IDENTIFIED AS COMPLIANT.

360 31492 2,000 EA PLUG,1IN,THDED,SQ HEAD,HD POLY PLUG, THREADED,SQUARE HEAD,HIGH DENSITY POLYETHYLENE, 1-INCH NATIONAL PIPE THREAD.

APPROVED: NIAGARA PLASTICS CO. PART NUMBER TP-11 OR APPROVE EQUAL# CITY OF TACOMA Page 27 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 370 35597 11 EA PLUG,2IN,BRASS,AWAA TAPER THREAD(CC) PLUG, BRASS, 2 INCH, AWAA TAPER THREAD (CC THREAD), SQUARE TOP

MATERIAL PROVIDED UNDER THIS SPECIFICATION MUST MEET ANSI/AWWA C800 and NSF/ANSI 372 AND IDENTIFIED AS COMPLIANT. Material # Manf Part# Manufacturer Name 10004515 H-10033N MUELLER 10004516 73206 A.Y. MCDONALD

380 32147 24 EA PLUG,2IN,BRASS,IPS PLUG, BRASS 2 INCH IPS.

MATERIAL PROVIDED UNDER THIS SPECIFICATION MUST MEET ANSI/AWWA C800 and NSF/ANSI 372 AND IDENTIFIED AS COMPLIANT.

390 33595 60 EA PLUG,2IN,GALV PLUG, GALV, 2 INCH, MALLEABLE IRON PIPE, CLASS 150, OR SCHED 40 STEEL, GALVANIZED PER ASTM A153, DOMESTIC MFG#

400 63462 760 EA PLUG,2IN,PVC,MIPT,SCH 40,OCTAGON HEAD PLUG,2 INCH,PVC,SCHEDULE 40,OCTAGON HEAD, MALE IRON PIPE THREAD, MUST MEET ASTM D2466

410 36630 140 EA PLUG,3/4IN, BRASS,AWWA TAPER THREAD(CC) PLUG,BRASS,3/4 INCH, AWWA TAPER THREAD,(CC THREAD),SQUARE TOP

MATERIAL PROVIDED UNDER THIS SPECIFICATION MUST MEET ANSI/AWWA C800 and NSF/ANSI 372 AND IDENTIFIED AS COMPLIANT. Material # Manf Part# Manufacturer Name CITY OF TACOMA Page 28 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 36630 CSP-3-ANL FORD METER BOX CO

420 32145 50 EA PLUG,3/4IN,BRASS,IPT PLUG,BRASS, .7500 (3/4IN), IPT

MATERIAL PROVIDED UNDER THIS SPECIFICATION MUST MEET ANSI/AWWA C800 and NSF/ANSI 372 AND IDENTIFIED AS COMPLIANT.

430 31491 4,000 EA PLUG,3/4IN,THDED,SQ HEAD,HD POLY PLUG, THREADED,SQUARE HEAD,HIGH DENSITY POLYETHYLENE, 3/4-INCH NATIONAL PIPE THREAD. APPROVED: NIAGARA PLASTICS CO. PART NUMBER TP-9 OR APPROVE EQUAL#

440 32143 20 EA PLUG,3/8IN,BRASS,IPT PLUG, BRASS, .3750 (3/8IN), IPT

MATERIAL PROVIDED UNDER THIS SPECIFICATION MUST MEET ANSI/AWWA C800 and NSF/ANSI 372 AND IDENTIFIED AS COMPLIANT.

450 31457 45 EA PLUG,PIPE,4IN,DI,MJ PLUG, PIPE, 4IN, DUCTILE IRON, MECHANICAL JOINT, WITHOUT BOLTS OR GASKETS. FITTINGS SHALL CONFORM TO THE LATEST ANSI/-AWWA C110-82 AND ANSI/AWWA C104/A21.4-85

MATERIAL PROVIDED UNDER THIS SPECIFICATION MUST BE MANUFACTURED WITHIN TWO YEARS OF THE DATE OF THE PURCHASE ORDER UNLESS PRIOR APPROVAL IS OBTAINED FROM TACOMA WATER.# CITY OF TACOMA Page 29 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 460 31462 38 EA PLUG,PIPE,6IN,DI,MECH JNT PLUG, PIPE, DUCTILE IRON, 6 INCH, MECHANICAL JOINT, WITHOUT BOLTS OR GASKETS. FITTING MUST COMPLY WITH ANSI/AWWAC104 AND ANSI/AWWA C153.

MATERIAL PROVIDED UNDER THIS SPECIFICATION MUST BE MANUFACTURED WITHIN TWO YEARS OF THE DATE OF THE PURCHASE ORDER UNLESS PRIOR APPROVAL IS OBTAINED FROM TACOMA WATER.

470 31468 12 EA PLUG,PIPE,8IN,DI,MECH JNT PLUG, PIPE, 8 INCH DUCTILE IRON, MECHANICAL JOINT, 6 HOLES, SOLID, NOT TAPPED, WITHOUT BOLTS, GASKETS OR GLANDS. FITTING TO COMPLY WITH ANSI/AWWA C104 AND ANSI/AWWA C153.

MATERIAL PROVIDED UNDER THIS SPECIFICATION MUST BE MANUFACTURED WITHIN TWO YEARS OF THE DATE OF THE PURCHASE ORDER UNLESS PRIOR APPROVAL IS OBTAINED FROM TACOMA WATER.

480 30640 94 EA BOX,30IN NO D30,VALVE,LOWER SECTION BOX, VALVE, LOWER SECTION, CAST IRON, 30 IN LONG, FOR 4 IN THRU 12 IN VALVES, MANUFACTURE IN ACCORDANCE W/WATER DIVISION STANDARD DRAWING 989-A DATED 5/93. IMPORT AND DOMESTIC ARE ACCEPTABLE, BUT THOSE THAT DO NOT MEET SPECS WILL BE RETURNED AT VENDORS EXPENSE.

NOT APPROVED: EAST JORDAN IRONS WORKS CITY OF TACOMA Page 30 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 490 30641 180 EA BOX,36IN NO D36,VALVE,LOWER SECTION BOX, VALVE, LOWER SECTION, 36 IN LONG CAST OR DUCTILE IRON, FOR 4IN THROUGH 12IN VALVES. MANUFACTURE IN ACCORDANCE WITH WATER DIVISION DWG 989-A DATED 5/93. IMPORT AND DOMESTIC ARE ACCEPTABLE, BUT THOSE THAT DO NOT MEET SPECS WILL BE RETURNED AT VENDORS EXPENSE.

APPROVED: RICH MFG CO #D-36 OR EQUAL

NOT APPROVED: EAST JORDAN IRON WORKS

500 30646 1,100 EA BOX,VALVE,UPPER SECTION,CI,ADJ BOX, VALVE, UPPER SECTION, CAST IRON, ADJUSTABLE, WITH LID,USED WITH 24, 30 AND 36 INCH LOWER SECTION PER ATTACHED DRAWING #989-A, DATED 05/93. IMPORT AND DOMESTIC ARE ACCEPTABLE, BUT THOSE THAT DO NOT MEET SPECS WILL BE RETURNED AT VENDORS EXPENSE.

510 30663 1,200 EA CABLE,3/16IN,SLEEVE,ALUMINUM OVAL SLEEVE, CABLE, 3/16 IN I.D., ALUMINUM OVAL, FOR USE WITH VINYL COATED CABLE,(USED WITH NICO PRESS TOOL)

520 30661 2,000 FT CABLE,3/32IN BARE,3/16IN COATED,304 SS CABLE, 304 STAINLESS STEEL, 7X7 STRAND WITH CLEAR VINYL COATING, CABLE DIAMETER TO BE 3/32 INCH BARE AND 3/16 INCH FINISHED. 250 FEET PER ROLL. FOR SECURING NON LOCKING FIRE HYDRANT CAPS TO FIRE HYDRANTS.

530 30688 45 BX CHART,RECORDING,BRISTOL #18040,7-DAY CHART, RECORDING, 7-DAY. APPROVED: BRISTOL NO 18040 CITY OF TACOMA Page 31 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 540 30707 20 BX CHART,RECORDING,TAYLOR 500P1225-2,7-DAY CHART, RECORDING, CIRCULAR, 10 INCH DIAMETER, 7 DAY, 0 TO 100 PERCENT IN 5 PERCENT INCREMENTS. MANUFACTURED BY TAYLOR INSTRUMENT, ROCH N.Y. TAYLOR NUMBER 500P1225-2.

550 40602 384 EA GAS,2 LB CANISTER,POLAR,FREEZE KIT, GAS, 2 POUND CANISTER, POLAR, FOR WHEELER REX ARTIC POLAR SYSTEM, PIPE FREEZING KITS. SOLD IN CASES OF 12 EACH.

APPROVED: MANUFACTURER POLAR GAS. MANUFACTURER PART NUMBER 17500-12. NO SUBSTITUTION.

Material # Manf Part# Manufacturer Name 40602 17500-12 Polar Gas

560 30929 20 EA FIBER,1/2IN X 4IN X 10FT,EXPANSION FIBER, ASPHALT, EXPANSION JOINT FILLER, 1/2-IN THICK, 4-IN WIDE, 10-FT LONG. RESILIENT, NON-EXTRUDING, EXPANSION-CONTRACTION JOINT FILLER FOR CONCRETE EXPANSION JOINTS. MEETS ASTM D-1751 AND AASHTO-M213.

570 31598 106 RL SEAL,1-1/4IN X 1-1/4IN X 14FT,VAULT SEAL, VAULT, 1-1/4 INCH X 1-1/4 INCH X 14 FOOT LONG, BUTYL RESIN

APPROVED: CONSEAL CS-202 Material # Manf Part# Manufacturer Name 31598 CS-202 CONSEAL

580 33885 609 EA GAS,PROPANE,DISP TANK,FOR TORCH KIT REFILL, PROPANE, FOR TORCH KIT, 14 OZ. DISPOSABLE TANK# Material # Manf Part# Manufacturer Name CITY OF TACOMA Page 32 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 10000128 175-5 TURNER 10000127 AHB-9 TURNER 10000129 TX-9 BERNZOMATIC

590 30514 1,200 EA BAG,22IN X 40IN,BURLAP,10OZ,TIED BAG, BURLAP, 10 OZ., 22 INCH X 40 INCH, 50 PER BUNDLE, 300 PER BALE. BUNDLES OF 50 MUST BE TIED OR SUBJECT TO BE RETURNED.

600 30976 30 EA BIBB,3/4IN,HOSE,LOW LEAD BRASS,FAUCET HOSE BIBB, LOW LEAD BRASS, 3/4IN MNPT INLET X GHT OUTLET, KINK FREE. HOSE BIBBS MUST BE CERTIFIED THEY MEET NSF372.

APPROVED: AY MCDONALD 72007-3/4

610 30904 72 EA COVER,9IN,PAINT ROLLER,MEDIUM NAP COVER, PAINT ROLLER, 9 INCH, TREATED CORE, MEDIUM NAP, APPROVED: DYNEL NO. 79039 AHB 007399 WOOSTER R-240 (1/2" NAP) & R-241 (3/4" NAP)

620 10011 48 EA CRAYON,BL,LUMBER CRAYON, LUMBER MARKING, BLUE

630 10014 240 EA CRAYON,YL,LUMBER CRAYON, LUMBER, MARKING, YELLOW# Material # Manf Part# Manufacturer Name 10014 500-80321 MARKALL CITY OF TACOMA Page 33 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 640 36391 42 EA HOOK,3/8",SLIP,SLING,GRADE 8,ALLOY STEEL HOOK, SLIP, 3/8 INCH, SLING, ALLOY STEEL, CROSBY # A-1339.

APPROVED: CROSBY A-1339 PART NUMBER 1049009

650 31210 25 EA HOOK,COVER,MANHOLE HOOK, MANHOLE COVER, FOR RELEASING LOCKS ON "KAMLOK" COVERS

660 31220 200 FT HOSE,100FT,SUCTION,PVC,STYLE F HOSE, SUCTION, 2 INCH, PVC, STYLE "F", IN 100 FT ROLLS, FOR WATER DIV SUCTION PUMPS.#

670 33884 40 EA RAKE,15IN,GARDEN RAKE, GARDEN, 15IN. Material # Manf Part# Manufacturer Name 10000124 300-9701 TRUE 10000123 63141 UNION TOOLS

680 33888 20 EA SLING,2IN W X 3FT L,DBL EYE,FLAT SLING, EYE & EYE WITH 1/2 TWIST, FLAT NYLON WEBBING, 2IN X 3FT, 5 TO 1 SAFETY FACTOR: LOAD CAPACITIES-VERTICAL 3200 LBS, BASKET 5400 LBS, CHOKER 2500 LBS. WEBBING MUST HAVE RED CORE WARNING YARN, EYES MUST INCLUDE CORDURA WEAR PADS.

"SLINGS SHALL MEET OR EXCEED THE REQUIREMENTS OF ASME STANDARD B30.9-1990 OR LATEST REVISION." ** ALL SLINGS MUST HAVE PERMANENT RATING TAG ATTACHED** Material # Manf Part# Manufacturer Name CITY OF TACOMA Page 34 of 35 THIS IS NOT AN ORDER All responses & inquiries must be All prices quoted shall be F.O.B. plainly marked with this Destination, Freight Prepaid and Allowed REQUEST FOR QUOTATION 6000047037

Item # Material# Delivery QTY UM Net Price Total Description Date 10005515 EE1-902 Lift-It Manufacturing 10005514 EE-1-902 OLYMPIC SYNTHETIC PRODUCTS, INC.

690 33889 20 EA SLING,2IN W X 6FT L,ENDLESS,NYLON SLING, ENDLESS, 2" WIDE X 6' LONG, NYLON, SINGLE PLY, TYPE 5. MINIMUM CAPACITIES: 4400 LB. CHOKE SWL, 5800 LB. VERTICAL SWL, 11600 LB. BASKET SWL. MUST HAVE A PERMANENT RATING TAG ATTACHED PER ASME B30.9A-1991. DOMESTIC MFG. ONLY# Material # Manf Part# Manufacturer Name 10000141 EN-1-902-6FT OLYMPIC SYNTHETIC PRODUCTS, INC. 10000140 1902AL-5-6FT MILLER

Net Value $ Plus Tax at ______% $

Total Amount $