IMPORTANT victorinox guarantee our legacy The altitude is displayed with a delay in order to substantially Victorinox guarantees all Swiss Army to be of first class Victorinox produces and sells unique, high quality products extend battery life. For this reason, a Victorinox Altimeter , and provides a lifetime guarantee against any worldwide which are of practical use in differing areas of life: may not be used to measure altitudes during parachuting defects in material and workmanship. Swiss Army Knives, , Timepieces, Travel Gear, Fashion and or similar types of speed/air pressure sports. Fragrances.

warranty The head office of the company is in Ibach, Schwyz, in the heart Victorinox Swiss Army, Inc., warrants this Victorinox product to be free of , where founder Karl Elsener first set up his cutler’s from defects in material and workmanship for the entire life of the business in 1884 and, a few years later, designed the legendary Swiss Army . Electronic parts are covered by a two-year warranty. “Original ”. If your Swiss Army Knife has a manufacturer’s defect covered by our warranty, we will either repair or replace it, at our option, without charge when it is returned to a Victorinox Authorized Dealer or sent to: 14378 REV2010 maintenance Service Center: Extend each implement halfway, then Victorinox Swiss Army, Inc. • 7 Victoria Drive • Monroe CT 06468-1212 apply a few drops of oil at the base of that Please include your name, address and phone number with your return. implement. For blades that do not move easily, open and close a few times in warm water, then dry and oil. This care repairs will ensure a lifetime of faithful service. A damaged Swiss Army Knife not covered by the warranty can be repaired for a nominal fee. Please return the damaged Swiss Army Knife with a letter explaining the requested repair, to the above address. You will then receive a letter confirming the cost of that repair before the repair is done. Mail form with check, money order or credit tm card information or call our customer service number to give approval altimeter with credit card number.

ALTIMETER BATTERY CHANGE customer service our products The Altimeter comes equipped with a 3 volt lithium battery (Panasonic Replacement Parts CR 1225, 3V). To change the battery, use the mini-screwdriver to open the Call customer service or visit us at swissarmy. For more information about our complete line of products, please visit battery compartment and replace the battery (see illustration below). com to find an Authorized us on-line at www.swissarmy.com. Dealer near you. © Victorinox Swiss Army, Inc. 2010. All Rights Reserved.

Only when you see the name Victorinox® stamped on the blade can you be assured you have the Original Swiss ArmyTM Knife. Customer Information • 1-800-442-2706 altimeter™ Calibration Adjusting the altitude Operating ranges Altitude: -100 to +6000m (-300 to +18000 ft) Altimeters calculate altitude on the basis of air pressure. For this In altitude mode, press and hold the Shield for 4 seconds until the Temperature: -20º to +60ºC (0º to +140º F) reason, any altimeter has to be recalibrated prior to use owing to up and down arrows appear. Release the Shield. The up and down daily fluctuations in air pressure. The altimeter has to be reset at arrows will flash alternately. To increase the elevation displayed, 5 a known altitude (e.g. at home, at a railway station, mountain cottage, press the Shield repeatedly while the arrow is up. To decrease the etc.) to this altitude. elevation, press the Shield repeatedly while the arrow is down. Once the display shows the correct elevation, wait 4 seconds until the 4 13 Turning on Digital Display display stops flashing. The display will switch itself off automatically Press and hold the Cross and Shield for 4 seconds until information after 15 minutes if not in use. appears on the display. Either the temperature or the altitude will oC oC appear depending on how long the display was last set. To toggle 1 between Altitude and Temperature modes, press the Cross and Shield. Press 4 seconds oC oC 7 oC oF ft oC oC 17 12 11 18 Setting Combinations Press 3 seconds 15,16 o o C C o o o o C F ft oC oC Press 4 seconds oC oC oF ft oC ft Celsius + Meters oC oF ft Press 6 seconds to increase

o o C F ft o o o o F ft C ft oC oF ft Press 1 second oC oF ft Press 1 second 6 8 oC ft oF m Farenheit + Feet oF ft oC ft

o o F ft C ft o o Press 1 second o o Press 1 second C ft F m oF ft oC ft 10 14 9 19 3 Celsius + Feet oF ft oC ft oF m oC m oC ft oF m features o o oC ft oF m o o oC ft oF m F m C m 1 Large Blade 11 Tweezers Press 1 second C ft F m Press 6 seconds oC ft oF m 2 Small Blade 12 Toothpick Farenheit + Meters o o 3 Corkscrew 13 Scissors oF m oC m C m C 4 Can Opener with 14 Multi-Purpose Hook 5 – Small Screwdriver (Parcel Carrier) Press 1 second o o Press 1 second to decrease oF m oC m o o 6 Bottle Opener with 15 Digital Altimeter Celsius + Meters oF m oC m C m C 7 – Large Screwdriver 16 Digital Thermometer oF m oC m

8 – Wire Stripper 17 Pressurized Ball Point Pen o o 9 Reamer 18 Straight Pin After 10 seconds C m C After 10 seconds 10 Key Ring 19 Patented Mini-Screwdriver chosen setting will remain the altitude is set oC m oC (20 Wood Saw – Altimeter Plus only) o o oC m oC o o For shipping purposes the battery was put in upside down. C m C Remove battery and install correctly.