DOCSLIB.ORG

Download Electrochemistry and Electrochemical Engineering: An

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

ELECTROCHEMISTRY AND ELECTROCHEMICAL ENGINEERING: AN INTRODUCTION DOWNLOAD FREE BOOK Alan C West | 285 pages | 17 Jul 2012 | Createspace Independent Publishing Platform | 9781470076047 | English | North Charleston SC, United States ISBN 13: 9781470076047 It is intended thattogether with the knowledge of various technologiesstudents can conceptualize in scientific terms the phenomena taking place in industrial electrochemical processes. Michael Faraday described his laws of electrolysis inrelating for the first time the amount of electrical charge and converted mass. Seller Inventory n. Engineering begins with a design problem: how to make occupants of vehicles safer, settle on Promotion of knowledge, applications and networking in the field of electrochemical engineering and applied electrochemistry i. Related Searches. Peter S. This article includes a list of general referencesbut it remains largely unverified because it lacks sufficient corresponding inline citations. Bestselling Series. Bard: Born December 18,Prof. Borsari 46 v. He is currently editor-in-chief of the Journal of the American Chem. Chemical Engineering Research and Design. For a better shopping experience, please upgrade now. Follow us. We use cookies to improve this site Cookies are used to provide, analyse and improve our services; provide chat tools; and show you relevant content on advertising. This publication provides over pages of introductory technical guidance for civil engineers, marine engineers and other professional engineers and construction managers interested in design, construction and Electrochemistry and Electrochemical Engineering: An Introduction of facilities and infrastructure in cold regions where ice is a substantial New Paperback Quantity Available: Electrochemical engineering is applied in industrial water electrolysisElectrochemistry and Electrochemical Engineering: An Introductionelectrosynthesis, electroplatingfuel cellsflow batteries[8] decontamination of industrial effluents, electrorefining, electrowinning, etc. Charles Delacourt University of Picardie, France. The main example of an electrolysis based process is the Chloralkali process for production of caustic soda and chlorine. More information about this seller Contact this seller. Among other developments, the potentiostat enabled such studies. An Introduction to Ontology Engineering introduces the student to a Electrochemistry and Electrochemical Engineering: An Introduction overview of ontology engineering, and offers hands-on experience that illustrate the theory. Edward P. Help Learn to edit Community portal Recent changes Upload file. USA Prof. The conference took place on June Brand new Book. His professorship in physical chemistry followed Electrochemistry and Electrochemical Engineering: An Introduction at the Univ. The event will be held in the same location Leeuwarden, The Netherlands on June Electrochemical engineering Department of Chemistry and Biochemistry. Furthermore, the use of electricity for oxidation and reduction may allow clean production of chemicals. Cookie Preferences We use cookies and similar tools, including those Electrochemistry and Electrochemical Engineering: An Introduction by approved third parties collectively, "cookies" for the purposes described below. It is intended thattogether with the knowledge of various technologiesstudents can conceptualize Electrochemistry and Electrochemical Engineering: An Introduction scientific terms the phenomena taking place in industrial electrochemical processes. Bard: Born December 18,Prof. The established performance criteria, definitions and nomenclature for electrochemical engineering can be found in Kreysa et al. Charles Delacourt University of Picardie, France. Electrochemical technologies are an integral part of modern life. More information about this seller Contact this seller. Other inorganic chemicals produced by electrolysis include:. Lectureslaboratory classes and lessons on the web. In the laboratory sessions, the students carry out experimental works illustrative of the themes developed in the lectures, whose results and main conclusions are presented in written reports and oral presentations. September Learn how and when to remove this template message. June Thus, methods based on electrochemical phenomena are ideal for sensors, energy storage and conversion, and microfabrication processes. Electrochemical engineering is the branch of chemical engineering dealing with the technological applications of electrochemical phenomena, such as electrosynthesis of chemicals, electrowinning and refining of metals, flow batteries and fuel cellssurface modification by electrodeposition, electrochemical separations and corrosion. The main example of an electrolysis based process is the Chloralkali process for production of caustic soda and chlorine. His research interests have been in the application of electrochemical methods to the study of chemical problems and include investigations in electro-organic chemistry, photoelectrochemistry, electrogenerated chemiluminescence, and electroanalytical chemistry. Other occurrences See Lesson Summaries Exams. The Carl Wagner Medal of Excellence in Electrochemical Engineering is awarded every three years by the EFCE Working Party on Electrochemical Engineering to a European researcher under the age of 35 Electrochemistry and Electrochemical Engineering: An Introduction outstanding contributions to research in applied electrochemistry or electrochemical engineering. ON OFF. Show less Show more Advertising ON OFF We use cookies to serve you certain types of adsincluding ads relevant to your interests on Electrochemistry and Electrochemical Engineering: An Introduction Depository Electrochemistry and Electrochemical Engineering: An Introduction to work with approved third parties in the process of delivering ad content, including ads relevant to your interests, to measure the effectiveness of their ads, and to perform services on behalf of Book Depository. Introduction The Carl Wagner Medal of Excellence in Electrochemical Engineering is awarded every three years by the EFCE Working Party on Electrochemical Engineering to a European researcher under the age of 35 for outstanding contributions to research in applied electrochemistry or electrochemical engineering. He is currently editor-in-chief of the Journal of the American Chem. Bochum and received his diploma in Currently, the main tasks of electrochemical engineering consist in the development of efficient, safe and sustainable technologies for the production of chemicals, metal recovery, remediation and decontamination technologies as well as the design of fuel cells, flow batteries and industrial electrochemical reactors. Discover the secrets of pop-up papercrafts with this illustrated guide. Seller Inventory IQ Learn about new offers and get more deals by joining our newsletter. USA Prof. Some topics will be discussed in the form of seminars prepared by the students. This textbook provides a concise and clear incremental evolution of the introductory fluid mechanics and Synopsis About this title Electrochemical technologies are an integral part of modern life. Are you happy to accept all cookies? A critical advance was provided by the work of Carl Wagner and Veniamin Levich in who linked the hydrodynamics of a flowing electrolyte towards a rotating disc electrode with the mass transport control of the electrochemical reaction through a rigorous mathematical treatment. Industrial Electrochemistry Follow us. Discover Electrochemistry and Electrochemical Engineering: An Introduction secrets of pop-up papercrafts with this illustrated guide. This publication provides over pages of introductory technical guidance for civil engineers and other After the Second World War, interest focused towards the fundaments of electrochemical reactions. Condition: New. Because electrochemical reactions are coupled to electrical current, their rates are relatively Electrochemistry and Electrochemical Engineering: An Introduction to measure, control, Electrochemistry and Electrochemical Engineering: An Introduction to exploit for work. Carl Wagner Medal The call for nominations is closed. The call for nominations is closed. This textbook provides a concise and clear incremental evolution of the introductory fluid mechanics and thermodynamics knowledge for first and second year engineering undergraduates. Forgot Electrochemistry and Electrochemical Engineering: An Introduction password? Most of them are continuous operations. Journal of Applied Electrochemistry. About the Author : Alan C. New Quantity Available: 1. Here is what is discussed: 1. The Award is generously sponsored by Covestro. News Event highlights Membership. He did his graduate work at Harvard Univ. Among other developments, the potentiostat enabled such studies. Thus, methods based on electrochemical phenomena are ideal for sensors, energy storage and conversion, and microfabrication processes. Accept all Manage Cookies Cookie Preferences We use cookies and similar tools, including those used by approved third parties collectively, "cookies" for the purposes described below. An Introduction to Engineering Thermofluids. Lectureslaboratory classes and lessons on the web. Please click here to reset your password. Theoretical classes. The established performance criteria, definitions and nomenclature for electrochemical engineering can be found in Kreysa et al. This branch of engineering emerged gradually from chemical engineering as electrical power sources
Recommended publications
  • Sodium Hydroxide

    Sodium Hydroxide

    Sodium hydroxide From Wikipedia, the free encyclopedia • Learn more about citing Wikipedia • Jump to: navigation, search Sodium hydroxide IUPAC name Sodium hydroxide Other names Lye, Caustic Soda Identifiers CAS number 1310-73-2 Properties Molecular NaOH formula Molar mass 39.9971 g/mol Appearance White solid Density 2.1 g/cm³, solid Melting point 318°C (591 K) Boiling point 1390°C (1663 K) Solubility in 111 g/100 ml water (20°C) Basicity (pKb) -2.43 Hazards MSDS External MSDS NFPA 704 0 3 1 Flash point Non-flammable. Related Compounds Related bases Ammonia, lime. Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa) Infobox disclaimer and references Sodium hydroxide (NaOH), also known as lye, caustic soda and sodium hydrate, is a caustic metallic base. Caustic soda forms a strong alkaline solution when dissolved in a solvent such as water. It is used in many industries, mostly as a strong chemical base in the manufacture of pulp and paper, textiles, drinking water, soaps and detergents and as a drain cleaner. Worldwide production in 1998 was around 45 million tonnes. Sodium hydroxide is the most used base in chemical laboratories. Pure sodium hydroxide is a white solid; available in pellets, flakes, granules and as a 50% saturated solution. It is deliquescent and readily absorbs carbon dioxide from the air, so it should be stored in an airtight container. It is very soluble in water with liberation of heat. It also dissolves in ethanol and methanol, though it exhibits lower solubility in these solvents than potassium hydroxide.
  • (12) United States Patent (10) Patent No.: US 8,936,770 B2 Burba, III (45) Date of Patent: Jan

    (12) United States Patent (10) Patent No.: US 8,936,770 B2 Burba, III (45) Date of Patent: Jan

    US00893677OB2 (12) United States Patent (10) Patent No.: US 8,936,770 B2 Burba, III (45) Date of Patent: Jan. 20, 2015 (54) HYDROMETALLURGICAL PROCESS AND (58) Field of Classification Search METHOD FOR RECOVERING METALS None See application file for complete search history. (75) Inventor: John L. Burba, III, Parker, CO (US) (56) References Cited (73) Assignee: Molycorp Minerals, LLC, Greenwood Village, CO (US) U.S. PATENT DOCUMENTS 2.916.357 A 12/1959 Schaufelberger (*) Notice: Subject to any disclaimer, the term of this 3,309,140 A * 3/1967 Gardner et al. ................... 299/4 patent is extended or adjusted under 35 3,711,591 A 1/1973 Hurst et al. U.S.C. 154(b) by 320 days. 3,808,305 A 4/1974 Gregor 3,937,783 A 2f1976 Wamser et al. 4,107,264 A 8/1978 Nagasubramanian et al. (21) Appl. No.: 13/010,609 4.278,640 A 7/1981 Allen et al. 4.326,935 A 4/1982 Moeglich (22) Filed: Jan. 20, 2011 4486,283 A 12/1984 Tejeda 4,676.957 A * 6/1987 Martin et al. ................ 423,215 (65) Prior Publication Data 4,740,281 A 4, 1988 Chlanda et al. US 2011 FO182786 A1 Jul. 28, 2011 (Continued) FOREIGN PATENT DOCUMENTS Related U.S. Application Data CN 1888.099 1, 2007 (60) Provisional application No. 61/297.536, filed on Jan. CN 101008047 8, 2007 22, 2010, provisional application No. 61/427,745, filed on Dec. 28, 2010, provisional application No. (Continued) 61/432,075, filed on Jan. 12, 2011.
  • Small Scale Distributed Ammonia Production

    Small Scale Distributed Ammonia Production

    Small Scale Distributed Ammonia Production Less than 100 tons per day Contact: Doug Carpenter at Sustainable Fuels, Inc. [email protected] Presented By: Bill Ayres at R3Sciences, LP www.r3sciences.com Overview • Nitrogen Generation • Hydrogen Generation • Hydrogen Purification • Reaction Gas Blending • Reaction Gas Storage • Reaction Overview • Reactor • Ammonia Separation • Residual Gas Stream • FAQ Nitrogen Generation • Nitrogen from Air (79% Nitrogen) − Pressure Swing Adsorption (PSA) • Gas compression, adsorption on carbon media, depressurization, nitrogen desorption • Repeat until desired purity (>99.99%) − Cryogenic Liquefaction • High Cost • High Volume • Very High Purity ( >99.999%) − LN2 Delivery Hydrogen Generation • Traditional Catalytic Steam Reforming of Methane and Water-Gas Shift Reaction CH4 + 2H2O CO2 + 4H2 • Capture CO2 for Urea Production • Chloralkali Process 2NaCl + 2H2O Cl2 + H2 + 2NaOH • Electrolysis of Water 2H2O 2H2 + O2 • Pyrolysis (Gasification) of Biomass C6H12O6 + O2 + H2O CO + CO2 + H2 Hydrogen Purification • High Purity Hydrogen Required to Prevent Catalyst Degradation − Low H2O − Low Sulfur − Low CO2 and CO • Traditional Chemical Methods − Diethylene glycol water removal − Methyldiethanolamine for CO2 − ZnO, FeO remove H2S chemically − N-Formylmorpholine also for H2S • Palladium Membrane Separation • Pressure Swing Adsorption Reaction Gas Blending •Low pressure hydrogen and nitrogen are blended using mass flow controllers then compressed to 3000 psi Reaction Gas Storage • Renewable Sources (Solar,
  • Economy of Salt in Chloralkali Manufacture

    Economy of Salt in Chloralkali Manufacture

    National Salt Conference 2008, Gandhidham Economy of Salt in Chloralkali Manufacture Vladimir M. Sedivy MSc (Hons) Chem Eng, IMD President, Salt Partners Ltd., Zurich, Switzerland Email: [email protected] Impurities in salt are costly. Impurities dissolve in electrolytic brine and need to be removed, employing expensive processes and chemicals. The cost of brine purification is high. Therefore, pure salt is more valuable. Chloralkali producers are willing to pay higher price for purer salt. This paper deals with the technical aspects of the use of salt in the chloralkali industry, explains under what conditions the consumption of brine purification chemicals can safely be reduced and offers the economic rules that can be used for estimating the additional value of pure salt. The main principles of high quality solar salt production and the related economy are explained. Advanced technologies, such as SOLARSAL saltworks design and operation, BIOSAL biological solar saltworks management and HYDROSAL salt purification process with hydroextraction of impurities facilitate profitable production of high quality solar salt for chloralkali industry, for human consumption and for exports. Salt is a most important raw material for chemical industry The annual world production of salt exceeds 200 million tons. Approximately one third of the total is produced by solar evaporation of sea water or inland brines. Another one third is obtained by mining of rock salt deposits, both underground and on the surface. The balance is obtained as brines, mainly by solution mining. Brines can be used directly, for example in diaphragm electrolysis, or thermally evaporated to produce vacuum salt. Salt type World production Solar salt 90,000,000 t/y Rock salt 60,000,000 t/y Brines and vacuum salt 80,000,000 t/y The chemical industry is the largest salt consumer of salt using about 60% of the total production.
  • Production of Caustic Soda Using Solar Powered Diaphragm Cells

    Production of Caustic Soda Using Solar Powered Diaphragm Cells

    IOSR Journal of Applied Chemistry (IOSR-JAC) e-ISSN: 2278-5736.Volume 8, Issue 2 Ver. I. (Feb. 2015), PP 09-16 www.iosrjournals.org Production of Caustic Soda Using Solar Powered Diaphragm Cells Eng. Wegdan Ahmad Osman Ahmad1 Khartoum, Sudan2 Dr. Abdelsalam Abdelmaged3 Department of Chemical Engineerin, Faculty of Engineering, Al-Neelain University Khartoum, Sudan (E-mail: [email protected]) Department of Chemical, Faculty of Engineering, Al-Neelain University, Head of Department of Chemical Engineering Khartoum, Sudan (E-mail: [email protected]) Abstract: we showed in this paper the possibility of producing caustic soda directly from solar powered electrolytic diaphragm cells in comparison with present conventional modes of electrochemical production.,The results showed that this method has superior economic characteristics. The non-asbestos diaphragm cell showed similar trend with the conventional asbestos diaphragm cell performances indicating higher yield of caustic soda per d.c Watt. The asbestos and non-asbestos diaphragms served to hinder the formation of unwanted substances as well as permit reasonable production of the desired products. Quantitative analysis showed that the quantity and concentration of caustic soda produced varied with the current and voltage obtained from the solar panels which were dependent upon the intensity of the sun on any particular day and the length of time the panels were exposed to sunlight.[1] Keywords: caustic soda, asbestos, diaphragm cells, solar, non-asbestos, economic . I. Introduction Among the various strategies aimed to meet energy demand, efficient use of energy and its conservations emerges out to be the least cost option. Energy Conversation assumes special significance due to the limited availability of energy, and heavy dependence on imports for this purpose.
  • Soda Ash Sodium Carbonate

    Soda Ash Sodium Carbonate

    Alkali-Chlorine & Allied Chemicals Course : ACCE-2221 2nd Year : Even Semester Group-A : Chapter-2 30 January 2016 Course Outline 1. Alkali, Chlorine and Allied Chemicals 2. Sodium Chloride as raw material 3. Manufacture of soda ash, Caustic soda, Chlorine. 4. Manufacture of hypochlorite's and bleaching powder. 30 January 2016 Alkali In chemistry, an alkali is a basic, ionic salt of an alkali metal or alkaline earth metal chemical element. Some authorsalso define an alkali as a base that dissolves in water. A solution of a soluble base has a pH greater than 7.0. 30 January 2016 Allied Chemicals Caustic potash Caustic soda Chlorine compressed or liquefied Potassium carbonate Potassium hydroxide Sal soda (washing soda) Sodium bicarbonate Sodium carbonate (soda ash) 30 January 2016 Alkali Metal 30 January 2016 Alkali 30 January 2016 Alkali 30 January 2016 Common properties of Alkali Moderately concentrated solutions (over 10−3 M) have a pH of 7.1 or greater. This means that they will turn phenolphthalein from colorless to pink. Concentrated solutions are caustic (causing chemical burns). Alkaline solutions are slippery or soapy to the touch, due to the saponification of the fatty substances on the surface of the skin. Alkalis are normally water soluble, although some like barium carbonate are only soluble when reacting with an acidic aqueous solution. 30 January 2016 What is soda ash? Sodium carbonate (also known as washing soda, soda ash and soda crystals), Na2CO3, is a sodium salt of carbonic acid (soluble in water). It most commonly occurs as a crystalline hepta-hydrate, which readily effloresces to form a white powder, the monohydrate.
  • Dynamic Model of Chloralkali Membrane Process

    Dynamic Model of Chloralkali Membrane Process

    Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 170 ( 2017 ) 473 – 481 Engineering Physics International Conference, EPIC 2016 Dynamic Model of Chloralkali Membrane Process T Budiartoa, E Eschea, J U Repkea, E Leksonob a Process Dynamics and Operations Group, DBTA , Technische Universität Berlin, Str. des 17. Juni 135, D-10623 Berlin, Germany* bEngineering Physics Group, Institut Teknologi Bandung, Str. Ganesha 10, 40132 Bandung, Indonesia† Abstract Chloralkali is one of the most important and energy intensive processes in the chemical industry. The process produces chlorine through electrochemical conversion. The process’s energy consumption is a major production cost for the chloralkali industry. Since the demand for energy efficiency and environmentally friendly processes in industry increases, ion exchange membranes are used intensively in the process. One of the prospective energy sources for this process is renewable energy, which shows strong fluctuations and highly unpredictable behavior. Dynamic behavior of the process becomes important to measure and predict the feasibility of the process. Therefore, modelling of the process dynamics is required. Rigorous model of material balance and voltage balance of the process are developed and investigated in this paper. The material transport phenomena inside the electrolyser are modelled considering a number of driving forces. The developed model also predicts the voltage and current density of the cell. The process simulation result is compared to experimental data. © 2017 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (©http://creativecommons.org/licenses/by-nc-nd/4.0/ 2016 The Authors. Published by Elsevier Ltd. ). Peer-review under responsibility of the organizing committee of the Engineering Physics International Conference 2016 Keywords: chloralkali; dynamic model; electrochemical process; demand response potential 1.
  • Design, Analysis and Optimization of Novel Photo Electrochemical Hydrogen Production Systems

    Design, Analysis and Optimization of Novel Photo Electrochemical Hydrogen Production Systems

    Design, Analysis and Optimization of Novel Photo Electrochemical Hydrogen Production Systems By Musharaf Rabbani A Thesis Submitted as Partial Fulfillment of the Requirements for the degree of Doctor of Philosophy in Mechanical Engineering Faculty of Engineering and Applied Science University of Ontario Institute of Technology Oshawa, Ontario, Canada, 2013 © Musharaf Rabbani Abstract Hydrogen is a green-energy carrier with a high heat of combustion. If obtained from renewable sources, it could be the ultimate and environmentally benign solution for the future energy requirements. This thesis presents the candidate’s research on the photochemical hydrogen production cycle, motivations and objectives, literature survey, thermodynamic modeling, exergoeconomic modeling, electrochemical modeling, statistical modeling and preliminary results of the photochemical research. The process selected for the present study is known as the “chloralkali process”. The main objective of this research is, in this regard, to develop a hybrid system that produces hydrogen by photo chemically splitting water and neutralizing the by- products (i.e. hydroxyl ions) into a useful industrial process. To be more specific, the objective of this present study is to develop a system that combines photochemical hydrogen production with electrochemical chlorine and sodium hydroxide production in a photo electrochemical chloralkali process. Initially, a series of experiments are performed by using an electric power supply. These initial experiments are followed by photo electrochemical experiments, experiments with salt water, experiments without hole scavenger material and solarium experiment. The results of electrochemical experiments show that the concentration of brine in the anolyte compartment and the concentration of electrolyte in the catholyte compartment do not affect the rate of chlorine and hydrogen production.
  • Electrochemical Engineering

    Electrochemical Engineering

    Heterogeneous Reaction Engineering: Theory and Case Studies ModuleModule 88 Electrochemical Processes and Reactor Design P.A. Ramachandran [email protected] Chemical Reaction Engineering Laboratory OUTLINE ¾ Cell thermodynamics ¾ Technological examples ¾ Environmental aspects ¾ Kinetics of electrode reactions ¾ Transport effects Half-Reactions and electrodes Redox reactions: Reactions in which there is a transfer of electrons from one substance to another. Half-reactions: Redox reactions are expressed as the sum of two half-reactions. Electrode: Metallic conductor Anode: Electrode where oxidation occurs Cathode: Electrode where reduction occurs Example: 2H2(g)+O2(g)→2H2O (aq) Anode (Oxidation) reaction: Cathode (Reduction) reaction: + - + - 2H2 → 4H + 4e O2+4H +4e →2H2O Schematic of a fuel cell Current flow from cathode to anode Electrons move through external circuit + + H2 H H O2 - + O2 H2O Anode Porous Cathode separator + - + - 2H2 → 4H + 4e O2+4H +4e →2H2O Details of a fuel cell Schematic of an electrolyte cell Cell Thermodynamics 0 nFEr = ΔG where n = number of electrons transferred F = Faraday’s constant = 96500 C/g-mole It is common practice to write all half-reactions as two oxidation reactions and the overall reaction is the difference of the two: + - 2H2 → 4H + 4e Ea = 0 (by convention) + - 2H2O → O2+4H +4e Ec = 1.23V 0 E r = Ea-Ec = -1.23V (standard conditions) If the reaction potential is negative, the reaction is spontaneous → FUEL CELL Cell Thermodynamics cont’d 0 ⎛ a p ⎞ The free energy change of reaction is ΔG = ΔG + RT ln⎜ ⎟ ⎝ ar ⎠ where ap is the product of activities of all products. RT ⎛ a ⎞ 0 ⎜ p ⎟ Er = Er + ln⎜ ⎟ Nernst Equation nF ⎝ ar ⎠ The effect of temperature in the reaction equilibrium can be calculated in a similar manner.
  • Electrification and Decarbonization of the Chemical Industry

    Electrification and Decarbonization of the Chemical Industry

    Electrification and Decarbonization of the Chemical Industry The MIT Faculty has made this article openly available. Please share how this access benefits you. Your story matters. Citation Schiffer, Zachary J. and Karthish Manthiram. "Electrification and Decarbonization of the Chemical Industry." Joule 1, 1 (September 2017): 10-14 © 2017 Elsevier As Published http://dx.doi.org/10.1016/j.joule.2017.07.008 Publisher Elsevier BV Version Author's final manuscript Citable link https://hdl.handle.net/1721.1/124019 Terms of Use Creative Commons Attribution-NonCommercial-NoDerivs License Detailed Terms http://creativecommons.org/licenses/by-nc-nd/4.0/ Electrification and Decarbonization of the Chemical Industry Zachary J Schiffer and Karthish Manthiram* Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139 USA * Corresponding Author and Lead Contact; E-mail Address: [email protected] Summary The increasing availability of cheap renewable electricity provides an opportunity to decarbonize energy intensive processes. As part of this decarbonization effort, the commodity chemical industry is an important target due to its large energy requirements and greenhouse gas emissions. One potential paradigm for electrification involves replacing conventional petroleum and natural gas feedstocks with carbon dioxide, nitrogen, and water, and driving these reactants up the free energy landscape using renewable electricity to produce commodity chemicals such as ammonia and methanol. Decarbonizing the chemical industry not only leverages developments in renewable electrification but also can assist renewable electrification by providing a means of energy storage to overcome the intermittency of renewables. When commodity chemicals such as ammonia and methanol are produced renewably, these chemicals can then act either as energy carriers for renewable electricity or as intermediates for the production of an even wider range of chemicals that are incorporated into diverse products.
  • Chloralkali Process

    Chloralkali Process

    Chloralkali process en.wikipedia.org /wiki/Chloralkali_process The chloralkali process (also chlor-alkali and chlor alkali) is an industrial process for the electrolysis of NaCl. It is the technology used to produce chlorine and sodium hydroxide (caustic soda), which are commodity chemicals required by industry. 35 million tons of chlorine were prepared by this Old drawing of a chloralkali process plant process in 1987.[1] Industrial scale production began in 1892. (Edgewood, Maryland) Usually the process is conducted on a brine (an aqueous solution of NaCl), in which case NaOH, hydrogen, and chlorine result. When using calcium chloride or potassium chloride, the products contain calcium or potassium instead of sodium. Related processes are known that use molten NaCl to give chlorine and sodium metal or condensed hydrogen chloride to give hydrogen and chlorine. The process has a high energy consumption, for example over 4 billion kWh per year in West Germany in 1985.[2] Because the process gives equal (molar) amounts of chlorine and sodium hydroxide, it is necessary to find a use for these products in equal proportions. Procedures Three production methods are in use. While the mercury cell method produces chlorine-free sodium hydroxide, the use of several tonnes of mercury leads to serious environmental problems. In a normal production cycle a few hundred pounds of mercury per year are emitted, which accumulate in the environment. Additionally, the chlorine and sodium hydroxide produced via the mercury-cell chloralkali process are themselves contaminated with trace amounts of mercury. The membrane and diaphragm method use no mercury, but the sodium hydroxide contains chlorine, which must be removed.
  • Kick-Off Workshop for the Project “Management of Mercury And

    Kick-Off Workshop for the Project “Management of Mercury And

    in cooperation with Chloralkali Project - Uruguay Final Report UNEP/DTIE Chemicals Branch June 2011 Title page: Schematic drawing of the mercury cell process (courtesy Eurochlor) The Government of Norway supported this pilot project through the Norway ODA grant funds 2010 Chloralkali Project, Uruguay i Chloralkali Project - Uruguay Final Report Table of Content Page Table of Content.......................................................................................................................... i Tables ......................................................................................................................................... ii Figures........................................................................................................................................ ii Abbreviations and Acronyms....................................................................................................iii Summary ................................................................................................................................... iv 1 Introduction......................................................................................................................... 1 2 Institutional Arrangements.................................................................................................. 4 3 Use of Mercury in the Chloralkali Process ......................................................................... 6 3.1 The Mercury Cell Process.........................................................................................