windows 10 computer receiving download files by itself Why are files being downloaded on a PC that did not reserve Windows 10? I had only reserved the Windows 10 upgrade on one of my several PCs to see how it goes. After installing the Windows 10 on that one, I decided to keep Windows 8.1 on my other computers. This morning, August 1, 2015, I my laptop I had NOT reserved 10 on had a lot of activity going on. I discovered the Windows 10 setup files were being downloaded, and even though I had never clicked Reserve, the Get Windows 10 button had somehow replaced the Reserve option with Check Your Upgrade Status. When I launch the GWX app, it reverts back to Reserve Now, and the Cancel Reservation option is not there. I am furious, as it appears as through is force-feeding us Windows 10. How can I safely remove the Windows 10 installation files that were just downloaded, and how can I prevent them from being downloaded on my other PCs? Subscribe Subscribe to RSS feed. Report abuse. Replies (8) Welcome to Microsoft Community. Your interest in Windows 10 is much appreciated. How can I cancel my reservation? I don't want to upgrade to Windows 10 all. Open the Reservation app in the notification area (double click it) Click the Hamburger menu in the upper left corner, then select View Confirmation. In the lower left, click Cancel reservation and then confirm (twice). Can I uninstall the Reservation completely from my computer? Click (or press + S for Windows 8.1 users) Type: view installed updates. Hit Enter on your keyboard. Look through the list for the KB3035583 and KB2976978 update. Right click each update and click Uninstall. Can I uninstall Windows 10 if I do not like it? Keep us posted if you face any issues on windows in future. We will be glad to you. Report abuse. Was this reply helpful? Sorry this didn't help. Great! Thanks for your feedback. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. How satisfied are you with this reply? Thanks for your feedback. Report abuse. Was this reply helpful? Sorry this didn't help. Great! Thanks for your feedback. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. How satisfied are you with this reply? Thanks for your feedback. Barry, I have a similar issue. I posted what appears below in the forum and I know there is another person who posted the issue in this the Windows 10 forum. Here is what I submitted. I have received no replies. Posted in Windows 7 forum : I did not want Windows 10 on my Windows 7 machine so I did not reserve a . However, is trying to push the download through and it is failing with an error code 80240020. It also initially tried to update my Intel Graphics driver which I do not want either. That also failed with an error code of 80246001. In an attempt to prevent further tries by Windows Update to download Windows 10, I uninstalled and then hid previous updates KB3035583 and KB2952664. I then did a to the just before Windows Update tried to Download Windows 10. This seemed to work for several hours because when I checked for Windows Updates none were found and it was not showing that any installs failed. Now I again checked for Windows Updates and I am still notified there are no updates but I am seeing in the Updates Installed area that it failed. There is no update to hide for Windows 10 since it is failing. All I want to do is get back to the point where Windows 10 is not trying to download and install. How to use OneDrive to fetch files from a remote PC on Windows 10. On Windows 10, the desktop version of OneDrive, includes "fetch files," which is a feature designed to access files located on a remote computer, and it can come in handy in many scenarios. For instance, you can use the fetch files feature, if you happen to work from home, and you need to work on a document that you left in the office (or vice versa). When you're in a different location, and you want to show someone a collection of photos from your home computer. Or you can even use the feature to stream a video from a remote device no matter where it is located. In this Windows 10 guide, we'll walk you through the steps to fetch files from a remote device using OneDrive on Windows 10. How to access files remotely using OneDrive. Before proceeding, consider that the computer containing the files must be powered on to allow OneDrive to access the contents remotely. Interesting enough, this feature is available on Windows 10 and Windows 7, but not on Windows 8.1, macOS, or OneDrive (mobile). However, you can fetch files from Windows 8.1 and macOS devices using the web version of OneDrive. Enable OneDrive fetching. To enable remote access for files through OneDrive, use these steps: Click the OneDrive (cloud) button from the notification area. Click the button. Click the option. Source: Windows Central. Check the Let me use OneDrive to fetch any of my files on this PC option. Source: Windows Central. Once you complete the steps, you can start using the OneDrive on the web to download files from a remote device to Windows 10, macOS, or even Linux devices. If you no longer want to use the feature, you can revert the changes using the instructions, but on step No. 5 , make sure to clear the Let me use OneDrive to fetch any of my files on this PC option. Fetch files remotely. To access files remotely with OneDrive, use these steps: Open OneDrive on the web. Sign in with your . Quick note: Make sure to use the same account you're using with OneDrive on the remote computer. Click the Download button to fetch the document, photo, or video from the remote device. (You can also click the Upload to OneDrive to make the files available through the cloud service.) Source: Windows Central. After you complete the steps, you should now be able to continue to work on the file you fetched from a remote device. If you're using this feature to download files from a remote computer, you'll notice that OneDrive allows you to access favorite places and libraries. Also, from the "This PC" section, you can access all the drives attached to your machine, including the Windows 10 installation drive, as well as any secondary hard drive, such as those connected through USB and flash drives. More Windows 10 resources. For more helpful articles, coverage, and answers to common questions about Windows 10, visit the following resources: Windows 11 build 22000.132 is now out for Insiders in Dev and Beta channels. Microsoft is back with yet another Windows 11 preview build, once again for Insiders in both the Beta Channel and Dev Channel. Today's build is 22000.132 and includes a handful of new fixes, with the most notable changes arriving in the form of app updates independant from the build. Turns out Lone II isn't launching this month. Lone Echo II was supposed to come out this month, but it's been delayed again. Here's when you can expect it to finally enter orbit. Frostpunk 2 is official, and it's heading to PC. Frostpunk is a critically acclaimed strategy survival game, and now the Frostland universe is about to expand. Frostpunk 2 is bigger and grander than the original, and it's officially heading to PC (at some point). Prepare for your next trip with the best travel routers. If you're going on a trip, you need a portable travel router that not only provides a fast connection, but offers a few more uses as well. Here's the travel routers that will make dealing with Wi-Fi on your tip a breeze. Fix 'Startup Repair cannot repair this computer automatically' in Windows 11/10/8/7/Vista. On this page, we collected 6 fixes for you to get rid of "Startup repair cannot repair this computer automatically" error on Windows 11/10/8/7 with step-by-step tutorial guides. Workable Solutions Step-by-step Troubleshooting Fix 1. Remove Peripheral Devices If you have recently attached a device to your computer, remove the device. Full steps Fix 2. Run Bootrec.exe Restart your computer and press "F8", then choose "Repair Your Computer". Full steps Fix 3. Run CHKDSK Restart your computer, choose "Repair Your Computer" > "Command Prompt". Full steps More Fixes Restart your computer. Once it starts, press "F8", choose "Safe Mode with Command Prompt". Full steps. "Startup Repair cannot repair this computer automatically" Startup Repair is a Windows built-in tool that can check and the missing or damaged system files on your computer. Generally, this tool is applied when your computer cannot boot properly. However, many users have encountered an issue while using this utility, which is "Startup Repair cannot repair this computer automatically". This is the error message in Windows 7 or . In Windows 10, it's equivalent is "Automatic Repair couldn't repair your PC". If you click "View problem details" in Windows 7/Vista, you will the information below. (The problem signature might be shown different variables from the ones above on different OS.) Problem Event Name: StartupRepairOffline Problem Signature 01: 6.1.7600.16385 Problem Signature 02: 6.1.7600.16385 Problem Signature 03: unknown Problem Signature 04: 21200442 Problem Signature 05: AutoFailover Problem Signature 06: 65 Problem Signature 07: CorruptFile OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033. Then why did Startup Repair fail to work? Generally, when you receive the error message, it may indicate: There is a problematic device attached to your computer The of your system disk is damaged The MBR (Master Boot Record) of the hard drive is corrupted There may be virus attacks, disk write errors or power outages on your disk. 6 Fixes for "Startup Repair cannot repair this computer automatically" in Windows 11/10/8/7. If you cannot specify the cause of why Windows Startup Repair failed, never mind trying the simple fixes first. Method 1. Remove Peripheral Devices. Based on the information given by Microsoft, if you have recently attached a device to your computers like a camera or portable music player, you can remove the device and restart your computer. Sometimes, Windows cannot repair the computer automatically due to the device connected. If this tip doesn't work, don't get upset. There are many other ways for you to try. Method 2. Run Bootrec.exe. Bootrec, also called bootrec.exe utility, is a tool provided by Microsoft in the Windows Recovery Environment. Bootrec.exe can be used to fix the Master Boot Record (MBR), Boot Sector, Boot Configuration (BCD), and boot.ini. If it's the corrupt MBR or BCD that caused the problem, the solution is to correct the MBR or BCD record with the help of bootrec. By the way, this method requires a Windows recovery disk. Since you are using it when you perform a startup repair, you can run bootrec.exe following the steps below. Step 1. Restart your computer and press "F8" once you see the Windows logo. Step 2. Among the advanced boot options, choose "Repair Your Computer". Step 3. In the system recovery options, choose "Command Prompt". Step 4. Enter the commands below in order: bootrec /fixmbr bootrec /fixboot. Method 3. Run CHKDSK. As mentioned, bad sectors and file system errors on your hard drive may be the reason why you receive the error message "Startup Repair cannot repair the computer automatically". Running CHKDSK is able to check and repair your disk errors including bad sectors and file system errors. Step 1. Restart your computer and press "F8" once you see the Windows logo. Step 2. Among the advanced boot options, choose "Repair Your Computer". Step 3. In the system recovery options, choose "Command Prompt". Step 4. Enter the command below: C: /f /r. "C" is the drive letter of your Windows installation drive. Method 4. Run Windows System File Checker Tool. Windows System File Checker Tool can check and repair missing or corrupted Windows system files on your computer. Besides, using this tool doesn't need the Windows installation . All you need is to boot into the Safe Mode with Command Prompt. Step 1. Restart your computer. Once it starts, press "F8" in 1-second intervals until you see the Windows logo. Step 2. Then you will see the menu of "Advanced Boot Options". Under it, choose "Safe Mode with Command Prompt". Step 3. In Command Prompt, enter the following command: sfc /scannow /offbootdir=d:\ /offwindir=d:\windows. Step 4. Restart your computer. Method 5. Perform System Restore. If you've created a Windows system restore point as a system backup on your Windows 11/10/8/7 PC, you have the chance to fully restore your PC to its original state, at least to the previous state. System Restore is a feature in that allows users to revert their computer's state (including system files, installed applications, , and system settings) to a previous point in time. Thus, it can be used to from system malfunctions or other problems. Procedure 1. Restore Important Data from the Dead PC. When you are stuck with "Startup Repair cannot repair this computer automatically" or '"Automatic Repair couldn't repair your PC" error message on Windows PC, don't rush to perform System Restore. Performing a system restore will take your PC back to an earlier point in time, called a system restore point. Restore points are generated when you install a new app, driver, or Windows update, and when you create a restore point manually. Restoring won't affect your personal files, but it will remove apps, drivers, and updates installed after the restore point was made. Therefore, we highly recommend you to try powerful data recovery software - EaseUS Data Recovery Wizard with Bootable Media to get your data out of the current 'dead' PC: Notice: This will require a second healthy computer for help. Step 1. Select a location and start scanning. Launch EaseUS Data Recovery Wizard, hover on the location where you lost data, then click "Scan". Step 2. Preview and select the files. Wait until the scanning completes. You can use Filter or search bar to find lost files. Step 3. Recover lost data. Then choose a location to save the recovered data, and click "OK". You should store the data in another place instead of the original one. Procedure 2. Perform a System Restore. If you have enabled the System Restore on your computer and created a system restore point, you can fix "Startup repair cannot repair this computer automatically" in Windows 11/10/8/7/Vista be performing a system restore: For Windows 11/10/8/8.1 users: Step 1. Reboot your Windows 11/10/8 PC into Advanced Startup, and click "Troubleshoot". Step 2. Select "Advanced options", choose "System Restore". Step 3. Click on the Administrator Account and enter your password, click "Continue" to on. Step 4. Choose your system restore point created previous and follow the on-screen guidelines to complete the whole process. For Windows 7/Vista Users: Step 1. Insert your Windows installation CD or disc. Step 2. Press any key when "Press any key to boot from CD or DVD" message appears. Step 3. Select a language, a time and currency, and a keyboard or input method, and then click "Next". Step 4. Click "Repair your computer". Step 5. Select your Windows installation drive, which is usually C:\ and click "Next". Step 6. In the System Recovery Options Dialog Box, click on "System Restore". Step 7. Follow the System Restore Wizard instruction and choose the appropriate restore point. Step 8. Click "Finish" to restore the system. Finally, restart your computer and copy your restore data back to your PC. You should be able to use your computer and data again. Method 6. Repair Startup Error Without System Backup. If you don't have a system backup, fixing "Startup Repair couldn't repair your PC" error will be more complex. You can: Procedure 1. Restore from the Problem PC. You can directly follow the detail guidelines above to rescue your data with the help of EaseUS Data Recovery Wizard with Bootable Media. It fully allows you to recover data when PC won't boot or start in Windows 11/10/8/7/Vista. Procedure 2. Clean Install/Reinstall Windows OS. When you don't have a system restore point on your PC, the best way to remove 'Startup Repair' error on Windows 11/10/8/7, etc. is to perform a clean install of Windows OS. You can directly turn to Microsoft for online assistance (and Windows 7/Vista users are recommended to try this way). Or you can refer to the article about how to clean install Windows 10. How to Prevent "Startup Repair cannot repair this computer automatically" Error. After restoring your PC back to life and rescuing all precious data, it doesn't mean that your PC and data are safe now. Virus attack, system failure, system crash, data loss, and other unknown issues may occur anytime. How to prevent these issues from happening? That's quite difficult! Is it possible to protect your System and data securely from these disasters? Sure! Powerful Windows system backup software - EaseUS Todo Backup can help. It provides System Backup, File Backup, Disk/Partition Backup, System Clone, and other more advanced features to help you fully protect your PC from these issues. It will help you prevent and protect your computer from 'Startup Repair failure' error or similar issues. Making a backup is always the best way to prevent complete data loss. The Bottom Line. "Startup Repair cannot repair this computer automatically" is a relatively complex issue related to Windows. Although there are solutions to the problem, it may be difficult for you to apply since these operations are seldom taken during your daily use. If you don't want to try it yourself, you can send your computer to professionals for manual repair. What is Windows Update Medic Service (WaaSMedicSVC) and How to Disable It. Microsoft introduced this service called Windows Update Medic Service (WaaSMedicSVC) in Windows 10 not so long back. The entire purpose of this service is to fix any damages suffered by the Windows Update components, so that you can continue to receive the Windows updates without any interruption. Therefore, the service is responsible for managing any repairs and for the safety of the Windows Update Components. What is the SIH Client in Windows 10? As you boot your Windows 10 system, the OS sets a task in the Task Scheduler on a daily basis and this daily task initiates the SIH client. The job of the SIH client is to identify any corrupt system components and accordingly repair them that are critical for the automatic update of any Windows and Microsoft program installed in your computer. The task actually goes online to check how relevant are the repairs, and then based on the analysis, it downloads the required fixes to complete the repair process. Can We Turn Off the Windows Media Update Service? Yes, if you want to disable the service at any time, you can, but when you try to disable it through the Service manager, it gives you an Access Denied prompt. Also, service is disabled only temporarily, as the Windows OS automatically turns the update on at some point. How to Disable The Windows Update Medic Service. To disable the Windows Update Medic Service you can either use a freeware like a Windows Update Blocker or you can turn it off using the Registry Editor . Let’s see how. Method 1: By Editing the Registry Editor. Before making any modifications to the Registry Editor, make sure you create a backup of the registry editor settings so that in case you lose in data, you can recover it easily. Step 1: Press the Win + R hotkey on your keyboard to open the Run command . Step 2: In the Run command search field, regedit and press OK to open the Registry Editor window. Step 3: Copy the below and paste it in the Registry Editor address bar: On the right side of the pane, select Start . Step 4: Double-click on Start to open the Edit DWORD (32-bit) Value dialogue box. Go to the Value data field to and change it from 3 to 4 . Registry Editor and restart your system. The Windows Update Medic Service is now disabled. Method 2 – Create a Batch file to disable it quickly. Windows 10 periodic updates override registry fix explained above. So, here is a method to create a batch file and keep it on desktop or any drive. Whenever , it gets started again, just click on this batch file and it will get disabled. 2. Copy and paste the text given below into the notepad. 3. Now, Click on File and then click on save as . 4. Now, Choose All Files in save as Type option. 5. Name this disablemedic .(You can name it as per your ) 6. Now, whenever you want to disable , just click on this bat file. Method 3: Using the Windows Update Blocker. Step 1: Click on the below link to go to download page. Now, locate Windows Update Blocker and click on it to download it: Step 2: As soon as you click on the link, the download starts. Click to open the download file and then extract the file in your chosen folder. Once completed, it will open the Windows Update Blocker box. Under Service Status, click on the Menu button. Step 3: From the context menu, select Windows Services . Step 4: It opens the Service manager window. On the right side of the pane, under the Names column, locate Windows Update Medic Service . Step 5: Double-click on the service to open its Properties window. Under the General tab, go to the Service name section and copy the name – WaaSMedicSvc . Step 6: Now, go back to the folder where you have extracted the Windows Update Blocker software. Now, open the Wub.ini file in Notepad . Step 7: In the Notepad , go to the Service List section and under dosvc=2,4 type WaaSMedicSvc=3,4 . Save and exit. Step 8: Now, go back to the Windows Update Blocker box and press the Apply Now button to save the changes. Bluetooth Received Files - Location on Windows 10 Laptop. I am trying to find the location of uploaded Bluetooth files on my Windows 10 laptop. I understand that when the upload finishes you are given a choice of folder in which to store them, and I usually do that. However, the problem lies in when I have to cancel an upload because 6 simple photos from a phone has taken over an hour to upload and freezes somewhere along the green uploading bar on one of the photos. I then get notified that 2 were successful; 4 unsuccessful. Where do I find those successful 2 uploads. As I hadn't managed to finish the upload, the choice of where to store them had not been offered. I've tried the User/Apps data (the address given in an answer to another user's problem) and there is nothing there other than text. They must be somewhere on my laptop but Windows 10 is far too complicated to find the location. ***Post moved by the moderator to the appropriate forum category.* **