20210315

REV. REV.

WWW.EKSPLA.COM

pulse energy energy pulse J 10 repetitionrate pulse Hz 10 Nd:YAG Nd:YAG SLM Q-switched SLM Q-switched Remote control via keypad via control Remote USB portPC via from control Materialprocessing Ti:Sapphire, OPCPA, OPO, pumping dyelaser Holography laser Nonlinear testingOptics Up toUp self-seeded Diode-pumped, (SLM) Mode Longitudinal Single masteroscillator cavity masteroscillator Stable mode spatial TEM₀₀ producing output stability energy pulse Excellent toUp duration pulse ns 2 optional) are ns 25 or 10 (7, harmonic stabilized Temperature options generator

APPLICATIONS APPLICATIONS FEATURES ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ [email protected] MAIL MAIL - E +370 5 2649629 +370

Nd:Glass TEL

02300 , VILNIUS, 02300 - In addition, the main settings of The laser is controlled by a supplied The optional second (SH) (for The low jitter of the optical wearing laser safety eyewear. wavelengths. remote pad features a backlit display pulse with respect to the Q-switch beam profile, models with improved generators provide access to shorter the laser can be controlled through that is easy to read even when triggering pulse allows the reliable synchronization between the laser PC via USB port with application for For tasks that require a smooth and fourth (FH) (for 266 nm) harmonic an auxiliary remote control pad. The and external equipment. as close as possible to the Gaussian Gaussian fit are available. Windows™ operating system. 532 nm), third (TH) (for 355 nm) and series SAVANORIU 237, AV. LT

NL120 series Q-switched lasers deliver up to 10 J per pulse , holography, LIF ▪ APL2100/2200/4000 ▪ NL120 ▪ NL310 ▪ NL940 ▪ ANL ▪ ▪ NL940 ▪ NL310 ▪ NL120APL2100/2200/4000 ▪ ▪ UltraFlux HIGH INTENSITY LASERSHIGH without the use of external expensive with excellent stability. The innovative, more common designs that use an narrow linewidth seed diodes and nanosecond lasers are an excellent unstable laser cavity, the stable master stable the cavity, laser unstable including OPO, OPCPA or dye including OPO, OPCPA oscillator cavity produces a TEM₀₀ excellent beam properties after the diode‑pumped, self‑seeded master oscillator design results in Single testing and other tasks. spatial mode output that results in spectroscopy, remote sensing, optics Longitudinal Mode (SLM) output NL120 series electro-optically amplification stages. Q-switched nanosecond Nd:YAG Q-switched nanosecond Nd:YAG cavity‑locking electronics. Unlike

choice for many applications, NL120

Femtosecond Lasers Picosecond Lasers Picosecond Tunable Systems Nanosecond Lasers Nanosecond Tunable Lasers HighHigh Intensity Lasers Other Ekspla Products 114 7) 6) 5) 4) 3) 2) 1) SPECIFICATIONS HIGH LASERS INTENSITY REV. Typical beamdivergence Pulse energystability(StdDev) Beam pointingstability Umbilical length Typical beamdiameter Beam spatialprofile Power requirements Relative humidity Ambient temperature Water consumption(max.20°C) Laser headsize(W×LH) Pulse energy Model Optical pulsejitter(StdDev) Polarization at1064nm Linewidth Pulse repetitionrate Pulse durationat1064nm(FWHM) Power consumption Power supplysize(W×LH) OPERATING REQUIREMENTS PHYSICAL CHARACTERISTICS Averaged over30s. option. For NL12×-SH/FH option. For NL12×-TH request. Optional 7000mJoutputavailableupon options. andNL12×-SH/FH For NL12×-SH Outputs are notsimultaneous. for basicsystemwithoutoptions. all specificationsare measured1064 nmand at manufacture. Unlessstatedotherwise, witheachunitwe andwillvary performance specifications. Theyare indications of typical notice. Parameters markedtypicalare not specifications are subjecttochangewithout Due tocontinuousimprovement, all at 355nm at 532nm at 1064nm at 355nm at 532nm at 1064nm at 266nm at 266nm 0135 SAVANORIU 20210315 6) 5) 3) 6) 5) 3) 2) 11) 15)

AV. 14) 13) 9)

237, 1 12) )

LT 10) - 02300 7)

VILNIUS, 8)

LITHUANIA 550 ×6001030mm 455 ×1220270mm 15) 14) 13) 12) 11) 10) 9) 8) when ordering. from nominalvalue.Mainsshouldbespecified Voltage fluctuationsallowedare /-15% +10% level. 1/e² Beam diameterismeasured nmatthe at1064 Full angle,rms measured over30s. nm. 1064 Full anglemeasured pointat atthe1/e² available (contactEksplafordetails). output. Improved Gaussianfitbeamprofile is Measured mdistancefrom at1 thelaser With respect toQ-switchtriggeringpulse. For modelswithoutharmonic generators. for pulseenergy specifications. or 25nspulseduration.InquireOptional 7,10 ~ 12mm 1600 mJ < 5kVA 450 mJ NL125 700 mJ 140 mJ TEL

+370

5 2649629 220, 380or400VAC, three-phase50/60Hz E - MAIL 2 ±0.5ns(7,10or25areoptional)

[email protected] 10 –80%(non-condensing) 550 ×6001030mm 600 ×1500300mm Hat-Top, >70%fit ≤ 0.02cm⁻¹(SLM) linear, >90% <25µrad < 0.5mrad < 20l/min 22 ±2°C ~ 20mm 5000 mJ 2500 mJ < 0.2ns 1300 mJ < 8kVA < 0.6% < 3.0% < 2.0% < 1.0% NL128 700 mJ 2 units 2.5 m 10 Hz WWW.EKSPLA.COM

NL120 600 ×2000300mm 550 ×6001650mm 5000 mJ 10000 mJ ~ 25mm 2500 mJ < 10kVA 1500 mJ NL129 DANGER 2 units CLASS IV LASER PRODUCT IV LASER CLASS Max. 1.6J,pulse2ns Nd:YAG 1064nm,532355266nm REFLECTED ORSCATTERED RADIATION AVOID EYEORSKINEXPOSURETO DIRECT RADIATIONVISIBLE AND/ORINVISIBLELASER series 4)

115

Other Ekspla Products HighHigh Intensity Lasers Nanosecond Tunable Lasers Nanosecond Lasers Picosecond Tunable Systems Picosecond Lasers Femtosecond Lasers 20210315 REV. REV. series WWW.EKSPLA.COM

NL120 [email protected] MAIL MAIL - E → second harmonic → third harmonic → 2 ns pulse duration → 8±2 ns pulse duration +370 5 2649629 +370

Harmonic generator options: SH TH TEL

Pulse duration options: P8 default options — 7 ns, 10 ns or 25 ns pulse duration 7 ns, 10 ns or 25 options — Model NL125-10-P8-SH/TH 02300 VILNIUS, LITHUANIA VILNIUS, 02300 - rate in Hz Pulse repetition Pulse repetition th, without optimized for applications requiring smoo Provides beam profile and -P25 -P7, -P10 cavity can be laser master oscillator pulse duration the requiring longer For applications can be some of other specifications or 25 ns pulses. Note: to produce 7 ns, 10 ns modified for detailed datasheets. contact Ekspla changed. Please -G option. ines are typically lower in the near and medium field. Pulse energi hot spots beam profile version. comparison to standard SAVANORIU 237, AV. LT ▶ ▶ longer that 1 hour then laser HIGH INTENSITY LASERSHIGH few hours before switching on. will be no mains electricity for Laser must be Note: connected to the mains electricity all the time. If there ORDERING INFORMATION ORDERING OPTIONS (system) needs warm up for a

Femtosecond Lasers Picosecond Lasers Picosecond Tunable Systems Nanosecond Lasers Nanosecond Tunable Lasers HighHigh Intensity Lasers Other Ekspla Products 116