Mamiya C330 Accessories
Total Page:16
File Type:pdf, Size:1020Kb
!!I Accessories Filters Lens hoods Lens cases There are five different types of There are five different types of Seven types of hard leather cases filters (Y2, YG, 02, UV, and SL) for lens hoods available for interchange- are available for protecting the fol- each filter srze described in the able lenses. lowing interchangeable lenses : system chart on page 41. Lens hood for 55mm lens (*) 55mm, 65mm, 80mm, 105mm, l There are two different diame- Lens hood for 65mm lens (*) 135mm, 180mm, and 250mm. ters for the 80mm f/2.8 and Lens hood 42mm 4 for 80mm Soft leather case 105mm f/3.5 lenses. When you f/2.8 (chrome type) and 105mm The soft leather case is widely order filters for these lenses, f/3.5 (chrome type) lenses applicable to protect interchange- always specify the diameter of Lens hood 48mm 6 for 80mm able lenses for the Mamrya C your lens. f/2.8 (black type) 105mm f/3.5 Professional or to store accessories. l When using a 49mm diameter D and 135mm f/4.5 lenses This case also can hold lenses filter, employ the 49mm filter Lens hood for super 180mm, for the Mamiya Press and Mamiya for Mamrya C; otherwise attach- 180mm and 250mm lenses (*) RB. ing the lens hood might be im- Lens hoods marked with an possible. When you order filters, asterisk (*) have a side plate always specify the MAMIYA C which can be inclined. Attach Professional type. the lens hood to the lens with l To attach a filter to a lens of this plate upward. When light 49mm filter diameter, place your reflected from the lens hood to palm on the protective lens ring the viewing lens becomes annoy- screwed into the front barrel of ing while focusing, due to a the lens, turn the ring counter- certain light condition, incline clockwise to remove it, and then the side plate to eliminate the screw in the filter. When a filter annoying reflection. is not used, always replace the All of these lens hoods are com- ring to protect the lens barrel. paratively new type attached only to the taking lens. Old type lens hoods are also acceptable. 24 H Accessories Single Exposure Attachment By using the single exposure attachment provided, single exposures can be made of dry plates (2 1/2 x 3 1/2 in., 6.5x9cm) or cut films (4 3/4 x 6 1/2 in. cut film divided into four 1/4 sizes or 2 1/2 x 3 1/2 in.) When using 4 3/4 x 6 1/2 in. cut film divided into four one-quarter sizes, use a J-type film sheath. When using 2 1/2 x 3 1/2 in. film, use a D-type film sheath. Installing Method Replace the camera back cover with the exclusive back cover for single exposure. Always remove the spool in the camera. Install a holder containing a dry plate or cut film on the exclusive back cover, closing the outer frame of the back cover to complete preparation. PRECAUTION Since the position of its focusing surface differs, the conventional single exposure attachment for the MAMlYA C series cannot be utilized on this camera. 25 Focusing Screen The following types of focusing screen are Matted entire surface ; Fresnel lens (except center circular portion); For general photography available, replaceable with exposure factor scale. Suitable for any lens according to the pho- tographing purpose. A metal frame is pro- vided for all focusing screens. Focusing precision by the split prism is sensitive compared with the No. 2 Rangefinder Spot 4’ Matted entire surface (except cen- ter circular portion); with expo- sure factor scale. R Accessories Grip holder (for Mamiya C) Grip holder (for Mamiya C330 & RB) The gr,o holder is a very con- “enlent accessory for hand- holding the camera While tak- ing pictures or for carrying the camera. Its accessory shoe is attached on the top of the grip. Pistol grip Magnifying Hood This grip, which supports This magnifying hood may the camera from the bottom, be used instead of the focus- has a trigger type shutter ing hood. By turning the knob release button which many on the side of this hood, either persons prefer when following 3. 5X or 6X magnification can sports action. be selected. 27 Porrofinder CdS Porrofinder By attaching this Porrofinder This is a Porrofinder with instead of the regular focusing built-in CdS exposure meter hood, the camera can be held Match the index needles at eye level. The image in the within the finder by turning finder is right side up and cor- the dial on the back of the rect right to left ... actual visual finder, and read the dial focusing. scale. This device measures Magnification of this finder the amount of light traveling approximately doubles the image through the viewing lens on the ground glass focusing offering corrrect exposure screen. setting even for amateurs. Prism Finder Eye Correction Lens Through this prism finder, the This lens, designed to correct visibility is installed image on the ground glass focus- inside the eyepiece ring of the Porrofinder, CdS Por- ing screen appears exactly as the rofinder or Prism Finder. subject is seen. Really an in- Nine types of lenses are provided from +2.5 to -2 dispensable accessory for eye level diopter (each diopter is +2.5, +2.0, +1.5, +1.0, photo-journal photos or candid +0.5, -0.5, -1.0, -1.5 and -2.0). shots. When installing the lens on the finder, hold the Magnification of this finder is milled portion of the eyepiece ring with the thumb approximately 2.5 times the and finger and turn it counterclockwise to remove the image on the ground glass focus- ring. When the lens is a plus (convex) lens, Position ing screen, particularly bright it with the flat surface outside and when it is a minus and clear. (concave) lens place the concave surface on the ex- terior then screw the ring into its original position. 28 Accessories Tripod Adapter Type P Flashgun Adapter The flashgun adapter, design- ed for the Mamiya flashgun, is provided with an accessory shoe for accommodating other brands of clip-on type flash units. Flashgun Highly efficient large BC type flashgun-usable with both a screw-base bulb and a bayonet type base bulb--supplies suf- ficient light for taking picutures under any condition. 30 Accessories.