Union Center, SD
Cover Photo By: Melissa Wilcox Animal Health Cap-Chur Dart Guns $ Blued Rifle Tired of this method?! 595 We have a solution! Wife Approved Dart Gun Starter Kit Dart Gun Blued...... $595.00 Allows medication of hard Dart Gun Hard Case ...... $29.90 to handle animals or those in $ remote locations with ease. Cap-Chur Loads Brown (100) ..... 17.75 Very accurate at 60 feet. Cap-Chur (15 Darts) 10cc...... $83.25 Cap-Chur Stainless Steel Rifle Bore Snake ...... $22.95 Hoppe’s Solvent ...... $5.45 12cc Disp. Syringe ...... 40¢ $639 19 Ga. x 1.5” Disp. Needle ...... 30¢ Blued Pistol Complete Kit ------$75500 Double Burner Custom Stainless Steel Branding Stove Branding Irons $49 Hook Doctor 36” Figures 95 $39 $ Bars & $ 429 1/4 Circles 39
Write-On Tags Calf...... 49¢ ea. Calf Sled Buttons...... 30¢ ea. $229
3 Star Medium...... 99¢ ea 4 Star Large...... $1.20 ea Large Medium Small Mini Buttons...... 30¢ ea 4-Star 3-Star 2-Star 1-Star Universal Tags Medium...... 85¢ ea. Large...... 95¢ ea. Z-TAGS Buttons...... 30¢ ea. Calf...... 92¢ ea Dremel 120V Grinder...... $55 Cow...... $1.27 ea Dremel Flex Shaft...... $42 Dremel 1/8 HS Cutter...... $10 Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com 2 All prices subject to change due to availability and market volatility. L&H Branding Irons Electric Dehorner Electric Branding Irons Hot Knife All prices listed below apply to standard Allows for easy removal of twine buildup on 2”, 2.5”, 3”, 3.5”, or 4” letters or figures. bale feeders, processors and manure spreaders. 2” & 2.5” electric branders are made with Comes in a 6” length and is 110 volts a thin line 3/16” face, 3” and above with 3/8”. electrically heated. Single letter or figure...... $128 Two letters or figures...... $138 $ $ 127 Model 55, 2.5” Bar, 1” ID Hole...... 74 Three letters or figures...... $148 Model 55 A, 1” ID Hole...... $68 Model 55 S., 3/4” ID Hole...... $68 We’ve got your brand, custom design... $ Model 55TH, 3/4” and 1” ID Hole...... 85 NO PROBLEM!!! Call for Quotes! 5% Off Number Branders Universal Branders L&H Irons
Vertical Brander Using only a heavy duty three wire grounded extension cord connected to a three wire Horizontal Brander grounded electricity source will decrease your 1 1 2”, 2 /2”, 3” 3 /2” and 4” chances of an electrical shock and $ increase the quality of the finished brand. 402* (set of three) The iron will not work properly if the extension cord is improperly sized too small. See below chart for recommended gauge cord. Number Brands (nine individual irons) $860* Semi-Universal Universal Branding Iron 5” & 6” Number Brands (set of five) $562* Branding Iron Cord Wattage $98 $ 350- 600- 1000- 1500- 2000 Also available in 2” and 2 1/2” with 3/16” face. 87 500 750 1250 1750 *220 Volt Available L 25’ 18 18 16 14 12 E 50’ 18 18 16 12 10 Cast Bronze Dehorner N 100’ 18 18 14 12 10 G $ Replacement Handle Any Model Model 55 CD...... 106 150’ 16 16 12 12 10 $ T 12 H Grip Handle, Additional $12 Factory Installation Only 200’ 14 14 10 10 10 factory installation only Gauge of Cord Freeze Brands Branding times vary according to the type of metal in the irons (All times shown here are for L & H brass freeze branding irons) and the age, skin thickness and color of the animal. Branders should calibrate freeze branding irons by branding the recommended times and keeping accurate records of times and results. Animal Coolant Application Time Standard characters Liquid Nitrogen 6-12 Seconds 1”, 1 1/4”, 1 1/2”, or 1 3/4”...... $43 Colt 2” or 2 1/2”...... $51 Dry Ice & Alcohol 16-24 Seconds 3” or 3 1/2”...... $55 Liquid Nitrogen 8-12 Seconds Horse 4”...... $58 Dry Ice & Alcohol 20-24 Seconds $ 5” or 6”...... 60 SET OF numerals (0-8) Liquid Nitrogen 21-24 Seconds $ Calf SET OF LETTERS (a-z) 3” x 9/16”...... 219 Dry Ice & Alcohol 40-50 Seconds 1”, 1 1/4”, 1 1/2”, or 1 3/4”...... $383 3 1/2” x 3/8”...... $223 $ Liquid Nitrogen 25-30 Seconds 2” x 1/4”...... $471 3 1/2” x 9/16”...... 226 Cow 2 1/2” x 5/16...... $485 4” x 3/8”...... $249 Dry Ice & Alcohol 50-60 Seconds 3” x 3/8”...... $564 4” x 9/16”...... $259 *Darker colored animals require the minimal amount of time suggested. 3” x 9/16”...... $566 5” or 6” x 3/8”...... $305 3 1/2 x 3/8”...... $568 Number sets consist of 9 irons, 0-8, 3 1/2 x 9/16”...... $578 the 6 is inverted to make the 9. Freeze Brand DVD 4” x 3/8”...... $608 Custom Designs A comprehensive, step by step DVD of freeze branding as it 4” x 9/16” ...... $623 1 or 2 Character...... $138 pertains to horses. Gives details on the process, theory and practice. 5” or 6” x 3/8” ...... $762 3 or 4 Character...... $156 24 Minutes...... $29.95 ...... $15.95 with purchase of freeze brander. Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com All prices subject to change due to availability and market volatility. 3 Calving Common Sense Calf Shelter Rancher's $2,29500 Calving Pen $3,695 $3,935 Standard Calving Folding Calving Pen Only Pen Only • Most Versatile Calving Pen • Maternity tub • Perfect for AI use • Use for crowding cows or calves • Treatment pen for foot rot • Single animal sick pen • With removable corner post
• 7’ x 24’ long skid is made of 4 x 4 x 3/16 steel. • Unique skylight helps brighten interior for calves. • Galvanized 29 gauge tin covering (colors available). • Lift & carry hooks for easy moving. You can re-bed and move $850 more often to help lessen sick calf problems. Headgate No need for you to climb into this shelter!!! • Side door is more inviting for calves...mom is always close by. Vern’s Calving Pen For-Most Calving Pen $2,295 $3,095 Calving Pen Calving Pen & A-25 Headgate • 90° pen for easy crowding and nursing • Rear access door • Split nursing panel of 34” on both sides • 4’ floor to stabilize pen • Constructed of 14 gauge tubing • Available with top-of-the-line A-25 head gate
• 1/4 circle calving pen • 8’ Auto Latch Gate $3,325 • Self Catching Sweep Gate w/ split nursing panel • Self Catching Sweep Head Gate • Rear gate to open when working on animal • No more fear of animal turning around in corners • Safer and Smoother Operation
Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com 4 All prices subject to change due to availability and market volatility. Cattle Products WW Loading Chutes Standard Loading Chute • 2-7/8” pipe frame • 1/4” floor plate • Front swivel plate $ • Side truckers door 5,895 • 12 Gauge siding sheeting • 16 ft. chute length • Full length catwalk • Weight 3700 pounds
Double Loading Chute • Standard Loading Chute Features • Stock Trailer Loading Chute $ • Weight 6,000 pounds 8,395 Dakota Loading Chute Used Panels • Main Frame 2 1/16” well pipe • Sheeting is all 14 Ga. Steel • 8’ wide x 22’ long • Gate at bottom of truck load out • Gate at front of stock trailer load out • Weight approx. 3,900# $ $ 12’ 5 Bar 89 6,700 16’ 5 Bar $105 12’ 5 Bar/3 Ft. Gate $89 1 1/4” Square Tubing 4’ x 4’ x 4’ Fiberglass Huts Flip Lid Belting $ 95 40” $450/Ft. 6’ x 10’ $650 60” $650/Ft. 6’ x 10’ w/Holes $450 72” $750/Ft. On Steel Skids Duralite 25' Stock Trailer Built to be Tough!!! • Tapered Nose • 2 - 7,000# Torsion Axles • Tailgate w/Slider • 2- HD Slotted Center Gate Call for • 4 Outside Tie Loops Quotes • 2 Rear Load Lights • 5 - 14 Ply Tires (Includes Spare Tire) • 48” Side Door Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com All prices subject to change due to availability and market volatility. 5 Fencing
Black Hills Ponderosa Pine 5% Montana Lodgepole Pine OFF CCA Treated Each Bundle Posts Per Bdl. 3 ½” x 6’6” Blunt $6.25 $5.95 80 3 ½” x 6’6” Pointed $6.75 $6.40 80 4” x 6’6” Blunt $7.75 $7.35 70 4” x 6’6” Pointed $8.25 $7.90 70 5” x 6’6” Blunt $8.55 $8.15 50 5” x 6’6” Pointed $8.15 $7.90 45 4” x 7’ Blunt $7.95 $7.55 80 4” x 7’ Pointed $8.40 $7.95 80 5” x 7’ Blunt $9.25 $8.65 45 T-Posts 5” x 7’ Pointed $9.85 $9.35 45 All Posts are 5 FREE CLIPS 4” x 8’ Blunt $8.25 $7.85 70 1.33# per ft. with each post. 4” x 8’ Pointed $8.75 $8.25 70 T-Posts...... 0+200...... 200+ 5” x 8’ Blunt $10.50 $9.95 45 $ 15 $ 05 5” x 8’ Pointed $11.25 $10.60 45 5½’ ...... 4 ...... 4 $ 49 $ 39 6” x 8’ Blunt $15.50 $15.00 35 6’ ...... 4 ...... 4 6” x 8’ Pointed $15.95 $15.50 35 7’ ...... $520...... $510 5” x 10’ Blunt $15.00 $14.00 50 5” x 10’ Pointed $15.65 $14.65 50 5” x 12’ Blunt $18.95 $17.95 40 Post Hole Cleaners 6” x 10’ Blunt $22.00 $21.00 30 6” x 12’ Blunt $26.50 $25.50 30 $ 6” x 14’ Blunt $39.95 $38.95 30 Hole Depth 3’ 119 6” x 16’ Blunt Peeled $50.95 $49.95 30 $ Ask about semi load discounts. Hole Depth 4’ 125 The Osmose® Lifetime Residential & Agricultural Limited Warranty Original consumer purchasers or “first-owners” of specific Osmose brand $ wood products are eligible for a LIFETIME LIMITED WARRANTY. Hole Depth 5’ 129 Under their terms of this warranty, Osmose will replace any of its labeled or stamped Above Ground (.25 pcf) or Ground Contact (.40 pcf) Osmose brand wood products used in, or in conjunction with, residential or Sucker Rod agricultural applications should these Osmose brand wood products $9 structurally fall in the service due to rot, fungal decay or termite attack. 3/4” x 25’ ...... 7/8” x 25’ ...... $10 1” x 25’ ...... $12 Bridge Timbers NAIL OR LAG CLIPS..... 45¢ ea. Fiberglass Drill Stem $495/Ft. 8” x 12” 11’-20’ Long 2 3/8” x 31’6” $15/stick Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com 6 All prices subject to change due to availability and market volatility. Fencing Farm King Post Drivers Skid Steer Model Model 1450 $8,495 Standard Equipment •Category I and II 3-point hitch •Optional skid steer Quick-Tach mount frame •Integral stand •PTO driven hydraulic pump 3-Pt Model •Self-contained hydraulic system $6,795 •Full hydraulic controls •Mast height 105” Mast Extension Kit - $258 Railroad Ties #1 Fir #2 - Fir & Oak Mixed $ 95 $1495 Each 10 Each $ 50 $ 50 14 Ea./Bundle 10 Ea./Bundle High Quality - Long Lasting Fir Ties Switch Ties 10’ - 14’ - $295/Ft. Drill Stem Concrete Ties Lengths Vary Average Length 31’6” $1695 2 3/8” 2 7/8” $ 95 $ 50 $ 50 15 - 25+ 39 40 Truck Load 700#/Each 4” 2 3/8” Clips 2 7/8” Clips Delivery Available 7” x 8” Tops $ 50 55¢ ea. 89¢ ea. 8 1/2’ Long 49 Great for creek crossings or alleyways! I-Beam Drill Stem Pipe Posts Excellent for Corrals, Windbreaks or Fence Posts 2 3/8” x 8’ 2 3/8” x 10’ • 8 Lb. Per Ft. 12’ Black I-Beam...... $430/ft. $ 25 $ 15 $ 30 16 21 14’ Black I-Beam...... 4 /ft. 8’ Galvanized I-Beam...... $27/beam 2 7/8” x 8’ 2 7/8” x 10’ 9’ Galvanized I-Beam...... $2995/beam $ 75 $ 18 12’ Galvanized I-Beam...... $44/beam 18 24 13’6” Galvanized I-Beam...... $49/beam Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com All prices subject to change due to availability and market volatility. 7 Fencing Red Brand Barbed Wire Bekaert Heavy Duty 12.5 Ga. 1320’ Rolls High Tensile ZA Barbed Wire 14 Ga. 2 Pt. $3.00/Roll $ 95 $ 95 Mail-In 63 Roll 61 Each Rebate $ 95 $ 95 62 60 Pallet Each/pallet quantity (36 Rolls) (27 rolls per pallet) The ultimate solution for high quality & long life at an affordable price! • 30% Stronger than 12 1/2 gauge barbed wire Stockade Cordless Stapler • Strongest Barbed Wire on the Market • Nominal breaking strength of 1400 lb. $ 00 • Zinc Aluminum coating is more corrosion resistant 1,295 than standard 12 1/2 gauge barbed wires. Gas Powered Stapler!!! ▪ Averages 3,000 staples per battery Bekaert High Tensile Woven Wire ▪ Averages 500-650 staples per fuel cell Stay Spacing ▪ Drives up to 2 staples per second into timber posts #Horizontal Height (Distance Line Of Between Length Price $ 95 Wires Wire Vert. Wires) Per Roll Per Roll Staples 109 832-6-14 Ga. HTHJ 8 32” 6” 330’ $13900 ▪ 9 Gauge Collated $26500 ▪ 1 3/4” 949-6-12.5 Ga. 330 9 49” 6” 330’ 949-12-12.5 Ga. 660 9 49” 12” 660’ $34650 Common Sense Wire Winder 1060-6-12.5 Ga. 330 10 60” 6” 330’ $32500 1561-6-12.5 Ga. 330 15 61” 6” 330’ $40500 1775-6-12.5 Ga. 330 17 75” 6” 330’ $45900 $1,250 2096-12-12.5 Ga. 330 20 96” 12” 330’ $43900 2096-6-12.5 Ga. 330 20 96” 6” 330’ $52500 STANDS UP TO SNOW, LIVESTOCK AND WILDLIFE *This heavy duty hydraulic wire winder weighs 150 lb. • Calving lots *Two sealed bearings reduce side pressure on motor. • Wing fence *Level Wind makes rolls look like a new roll of wire. *Mounts on loader bucket or 3 point hitch. • Corrals *Adjustable flow control valve with adjustable by-pass • Deer proof hay yard fence allows you to run from the ground and is a clutch mechanism for extra safety. • Horse fence *Spool is made so you can reuse your wire and can be modified for high tensile. Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com 8 All prices subject to change due to availability and market volatility. Fencing Gripple H-Brace Wire Gripple Wire Connectors
$ 50 T-Clip 6 Each Barbed Wire Smooth Wire Barbed $1615 A complete anchor kit which rapidly $1375 $1150 $1115 reduces install to less than one minute. Smooth • High grade, galvanized wire rope coating for maximum corrosion Wire Stretchers $ 95 resistance Standard 34 • Ideal for fence bracing With Lock $3995 Texas Wire Stretcher Galvanized Barbed Staples $1495 1 3/4”...... 50#...... $7450 1 3/4”...... 8#...... $1425 2”...... 8#...... $1425 Mini Bolt Cutter Fencing Pliers Adjustable Gate Latch $ 50 $2050 31 $ 95 Sandhills Gate Latch 32 $1950 Plammers $ 00 Speeco Post Pounder High Tensile Electric Fence Wire Saddle 50 Heavy Duty 12.5 gauge Galvanized • 4000 ft. Rolls Large $5500 $6500 $110 Speeco Gate Latch $2150
Speeco Two-Way Lock Speeco T-Post Puller $ 25 Gate Latch 13 Bullnose Pliers Bullnose Pliers W/Hook $1900 $ 50 $ 50 Small 43 PLIERS Small 43 Large $5350 MADE IN USA Large $5350 Western Drop-In Auto Gates No Foundation Required Drive-Over ATV Auto Gates
10’...... $1,69500 20’...... $3,39500 Closeout Price $ $ 00 $ 00 695 12’ ...... 1,995 24’...... 3,995 6’9” W x 11’6” L 16’...... $2,69500 Wing Sets...... $29500 18” T & 5’ Posts Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com REG. $ All prices subject to change due to availability and market volatility. 775 9 Corrals & Windbreaks V-Windbreak Design Super Steel Notice little or no snow accumulation downwind for several hundred feet. Galvanized & Primed 5% Discount Full Bundles ce $ 95 Your Choi 85 /Sheet 24’-6” Long 36” 1.5” Deep
Freestanding Portable Windbreak Panels WHOA Corral Gates Extra Heavy Duty • 8 Bar 7’ X 25’ W/Legs 2” Sq. Tubing On Ends • 1 1/2” Sq. Tubing Horizontal Bars $825 6+ $795 10+ $775 65” High • Including Two 1” Hinges
4’...... $149 12’...... $295 6’...... $239 14’...... $329 8’...... $259 16’...... $349 10’...... $279 W-Guard Rail Tri-Beam 12” x 13’ 6” Sticks 20” x 11’ Sticks $3995 $4495 Quantity Discounts 12” x 26’ Sticks 20” x 13’6” Sticks $7500 $5900 4’ W x 16’ L Mega Panel 18 Sheets Per Bundle 5% Off 1-1/4” Thick Bundle Qty. 1-1/8” Thick Shop Grade $95 $95 4’ W x 24’ L 12 Sheets Per Bundle 1-1/8” Thick 1-1/4” Thick Due to customer demand, call for availability $ $ * Factory second not intended for structural use 175 195 Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com 10 All prices subject to change due to availability and market volatility. Corrals & Windbreaks E-Z Corral Continuous Fence 48” Tall x 20’ Long 3 Bar $65 4 Bar $85 $6175- 10+ $8075 - 10+ Call for Volume 5 Bar $100 6 Bar $115 7 Bar $135 Discounts $95 - 10+ $10925 - 10+ $12825 - 10+
E-Z Corral Freestanding Panel E-Z Corral Gates 6 Bar - 20’ Panel 7 Bar Gates $225 $21375-10+
8’...... $230 14’...... $305 10’...... $250 16’...... $320 12’...... $270 Stampede Freestanding Panel 7 Bar • 25’ Panel • 5 1/2’ Tall Sucker Rod Panels 2 3/8” Drill Stem Frame 3/4” Sucker Rod Cross $295 24’ Long $236 Dakota Freestanding Panel Viking Freestanding Panel
7 Bar • 24’ Panel $ 7 Bar • 24’ Panel 410-10+ $ $ 360-10+ $425 $395-20+ 369 Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com All prices subject to change due to availability and market volatility. 11 Verns Mfg
Portable Loading Chute 5% Off Portable Panels · Chute is 12’ long 29” wide Vern’s · 5’ tall sides with 4’ of sheet metal · Loading floor adjusts from 30” to 52” · Gate at both ends of chute · Chute may be used to carry 10’ and 12’ portable panels · Holds up to 34 panels: 11 panels on each side of the trailer and 12 in the middle $ 3,450 10’ PANELS 12’ PANELS $ $ 5% Off 134 150 Deer Panels Vern’s 7’ x 16’ 8 Bar Panel Trailer
$1,525 Holds 30 Panels
$265 $255 10+ Automatic Gate Latches Gates 8 BAR LIGHT DUTY GATE 6 BAR LIGHT DUTY GATE • 51” High • 51” High • 1” OD 15 gauge tubing • 1.66 OD 14 gauge tubing Single Gate Latch • 3/4” x 12” long eyebolts • 3/4” x 12” long eyebolts Left or Right Available Double Gate Latch $ 00 • 42” chain closure • 42” chain closure $3900 55 • 4-20 ft. Lengths • 4-20 ft. Lengths Deer Gates 7’ Tall
8 BAR GATES 6 BAR GATES Open Width Price Open Width Price 4’ ...... $8650 4’ ...... $9025 6’ ...... $11400 6’ ...... $13300 Open Width Price 8’ ...... $12550 8’ ...... $15000 $ $ 50 $ 50 6’ ...... 172 10’...... 141 10’...... 163 $ $ 00 $ 00 8’ ...... 185 12’...... 158 12’...... 175 $ $ 00 $ 00 10’ ...... 224 14’...... 186 14’...... 206 $ 16’...... $19950 16’...... $22900 12’ ...... 253 $ 18’...... $23850 18’...... $26200 14’...... 318 20’ ...... $25000 20’ ...... $27550 16’ ...... $343 Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com 12 All prices subject to change due to availability and market volatility. Stur-D Products Stur-D Loading Chute Tub & Working Alley LEFT-HAND SQUEEZE CHUTE MODEL $5,400
RIGHT-HAND SQUEEZE CHUTE MODEL Straight Alley • 24’ Alleyway PORTABLE CROWDING TUB & ALLEY $ Porta-Tub with Adjustable Alley, Single Palpation Door, Single 5,995 • Single Catwalk catwalk, Alley Backstop, Hitch Jack & Rolling Door • 2 Slide Doors Portable PTAOM-0015 $9,400 Porta-Tub with Adjustable Alley, Squeeze Chute, Single Palpation Door, Automatic Headgate, Single Catwalk, Alley Backstop, Hitch Jack & Rolling Door PTSCM-0036 $11,320
Alley Backstop...... PTABS-9600...... $180 Rolling Door (includes track)...... PTRDR-0030...... $600 Manual Lift Jacks (set of 2)...... PTMLJ-8310...... $300 Hitch Jack...... PTHJK-9300...... $160 5% Off Stur-D Stationary Crowding Tub & Working Alley Auto Gates 9’ Stationary Tub w/ Load-out Door & Catwalk...... $3,400 11’ Stationary Tub w/ Load-out Door & Catwalk...... $4,000 $ $ Added Sweeper Gate for Stationary Tub...... 600 16’ 2,295 16’ Adjustable Alley w/ Walkways & Backstop...... $3,000 20’ Adjustable Alley w/ Walkways & Backstop...... $3,400 20’ $2,700 32’ Adjustable Alley w/ Walkways & Backstop...... $6,000 Palpation Cage Adjustable Width...... $800 Palpation Cage Non-Adjustable...... $640 Bottomless Bunks 24’ Adjustable Alley w/Walkway & Backstop...... $3,800 24’ Long 48’ Wide 22’ Deep $985
Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com All prices subject to change due to availability and market volatility. 13 Feeders & Bunks
Vern’s Crown Feeder Vern’s Bale Feeder Stur-D 9’ Hay-Saver Feeder Stur-D Open Top Feeder $572 $379 $760 $960 5% Off Stur-D
Rancher Basket Horse Feeder $ Rancher Double Bale Feeder Stur-D 14’ Oval Feeder 1,495 Pricing On $ $ In Stock Items 8’6” x 16’ $ 1,795 With Bottom Only 1,375 980 Smart Pace Horse Feeder 6' x 6' at base 7' x 7' at top 31" Tall $1,395 The Smart Pace Feeder can reduce hay waste by 30-50%!!!!!! Common Sense Bale Feeder Common Sense Double Feeder Smart Pace Feeder combines the many benefits of feeding through a net, with the $695 $895 ease of dropping a bale in a feeder, closing the lid and done. Bottomless Bunks Hay Manager Bale Feeder • 48” W x 24” D x 20’ L 8’ diameter & 6’ in height 16” openings with 23” of vertical height • Weighs 1,000 lbs. 7’ of chain to adjust bale height and feed restriction • 10 Gauge material Weight: 500 – 640 lbs fabricated with 14 gauge steel • Feed saver lip $ $855- $ Works great for 875 1,150 Cattle or Horses 5 or more WW Feed Bunks Vern’s Feed Bunks Standard Bunk Features • 10 Gauge material • 3/16” leg material $ • Feed saver lip • Legs capped top & bottom 749 38” W x 12” D x 20’ Long Weight: 750 lb. $735 10 or more 16’ x 24” x 8” Reg. $375 $ Options Available 16’ x 30” x 11” Deep 449 - Legs on inside - Painted - Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com Height variations 14 All prices subject to change due to availability and market volatility. Feed Ranch Hand All Season Mineral Tubs $20/Ton · Little to no loss by rain, snow, wind or spillage Convenient Size · Designed for range conditions Discount Easy to Handle 200 lb. Tub · Supplements high forage diets · Encourages consistent, year round consumption Recommended · Discourages over consumption Feeding Rate 1 tub/25 head of cattle · Provides high levels of macro and micro minerals · Contains a quality vitamin package Ranch Hand Ranch Hand Ranch Hand Ranch Hand Ranch Hand All Season All Season w/Garlic High Phos High Phos w/Garlic High Phos w/Biomoss $10850 ea $11450 ea $11050 ea $11650 ea $12350 ea • Controlled consumption from a disposable tub • Weather resistant, consistent consumption and ZERO waste • Organic trace minerals and vitamins (Designed for yearlings, breeding and • High bio-availability maximizes absorption of trace minerals for enhanced pregnant cows, and breeding bulls in areas with copper and zinc deficiencies) performance, faster immune response and improves conception rates • Calcium and phosphorus levels complementary to grasses and forages • Reduces phosphorus excretion, prevents water bellies, optimizes mineral cost and
• Higher levels of trace minerals and vitamins BENEFITS performance
Crystalyx Earn to Learn™ is a program designed to Handi-Hoppers assist any youth group such as 4-H clubs or 14% All Natural FFA chapters, with raising funds to participate 20% in educational activities that require 30% additional financial resources. • 4-H or FFA Member sells $40 CRYSTALYX® Discount Card for a price of $20 • Youth Member keeps $20 for its own Organization • Ground Opening Lid • Each Card can be redeemed for a $40 Discount • Easy Slide Grain Gate $ on Every 1 Ton Purchase of any • New 15” Tires 1 Ton 2,195 $20/Ton CRYSTALYX® Product at Cammack Ranch Supply • Rear Jack $ Discount • Safety Chains 2 Ton 2,925 *Ask about Feeder Finance Programs Available! • Lights CS Fenceline Bottomless Feeder 24’ Fence Line Feeder Panels $1,149 $689 $ 1,129-5 or more $669- • 4’ W x 26” H x 20’ L Front Feed Side 18” T 5 or more • Weighs 1,050 lbs. • 14 Gauge sheeting Welker Cake Feeders • Frame 11 Ga. steel Digital Counter
CRS Range Cake FOB Union Center 15% 20% 30% 1 TON 1 TON ATV Feeder Call For Pricing FLATBED OVER-THE-SIDE 650# Cake $3,495 $3,995 $2,149 Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com All prices subject to change due to availability and market volatility. 15 Water Products High Density Polyethylene Pipe 1”, 1 1/4”, 1 1/2”, 2” available • 200 lb. PSI Tire Tanks 6’...... $350 Shallow Bury $ 24” Max Depth 7’...... 395 8’ ...... $550 Call For Call for 11’ & 12’ $ Semi-Load Quotes YOUR CHOICE 695 Discounts Drinker Hole Tire Tanks Available Freeze Solid & Still be Viable *Call For Pricing* 12’ Tanks BRAND $ Tank Bird Ramp Hydrant Guard NEW 895 $ 95 13’ Tanks 29 $ 95 29 $925 $2495 Bleeder Valve Kit NRCS 10 or More 7’ x 1/4” Copper Line APPROVED 1 Brass Tee 1 Brass Valve $2295 Steel Tank Bottoms Apex Xtra Flow Float Valve 1” with 3/4” Adapter $4995 Working pressure: 4-175 psi. LONG LIFE HIGH FLOW LESS STOCK DAMAGE Fiberglass Tanks $ 55” Diameter with 2 - 2” Holes 139 12’Round $1,495 $ 66” Diameter with 2 - 2” Holes 199 8’ x 12’ $1,200 $ Pipeline Pipe 8’ x 20’ 2,100 $15/Ft. 10% Off Purchase Over 100’+ 20” Diameter Lengths Vary 15’ - 50’ 80#/Foot Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com 16 All prices subject to change due to availability and market volatility. Water Products Cobett Waterers Small Bowl Earth-Heated, Farmer-Designed Waterers Bury Depth 9’6” • Low/no traffic - OK Energy $97500 • No heat - OK Single Head Use • No concrete - OK Free • Open drinking area Large Bowl • Bull-tough Bury Depth 9’6” • Buried system $ 00 • Easy plumbing access 1,125 • Bison - Cattle - Horses - Sheep Large Bowl Cobett’s automatic waterers are designed with ease of use in mind - an open drinking Bury Depth 7’6” area, wide-open access to the plumbing and no required heating device. While Cobett Waterers are tough enough for bison, cattle and horses... $1,09500 they also serve sheep quite nicely. 2-3 Head Use Waterers Ritchie Waterers Omni 3 Omni 5 $795 $895 Water Capacity 10 Gallons Water Capacity 16 Gallons 31.5”L x 22”W x 33”T 40”L x 23.5”W x 33”T Drinking Height 26” Drinking Height 26”
Omni 3 features smooth rounded edges and a fully insulated Omni 5 features smooth rounded edges and a fully casing for energy efficiency. The stainless steel trough features insulated casing for energy efficiency The stainless steel thermostatically controlled heat elements that are attached to trough features thermostatically controlled heat elements the underside for frost free service even under the most severe that are attached to the underside for frost free service winter conditions. The larger Omni 3 is designed for larger even under the most severe winter conditions. herds and its fast refill valve will provide fresh water to The larger Omni 5 is designed for larger herds and it’s 100 beef cattle or 50 dairy. fast refill valve will provide fresh water to 150 beef cattle or 75 dairy. Water Drinking Post Standing water stays below the frost line when not in use, which means: • No Electricity NEW • No Minimum Head Count • No Insulation PRODUCT • 50F/10C Water Year Round • No Thermos System 8’ - $45999 Clean water 9’ - $47999 every use!!! 10’ - $54999 Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com All prices subject to change due to availability and market volatility. 17 For-Most Equipment A25 & A25T 5% Off Automatic Self Catch Head Gate Sale Prices 30 & 30T Heavy Duty Manual Headgate
A25 SPECS A25T SPECS MODEL 30 SPECS MODEL 30T SPECS Opening 60” Tall • Overall 69” Opening 66” Tall • Overall 73” Opening 60” Tall • Overall 69” Opening 66” Tall • Overall 75” (#1) Manual 30 Head Sweep Opening 28” Wide • Bottom 28” Opening 28” Wide • Bottom 28” Opening Top 27” Wide • Bottom 20” Opening Top 27” Wide • Bottom 20” FM30HS $ 00 Overall 39” less handle Overall 39” less handle Overall width w/handle - 62” Overall width w/handle open - 67” 339 Step Over: 2.5” · Closes To: 6” · 200 lbs. Step Over: 2.5” · Closes To: 6” · 220 lbs. Step Over: 5.5” · Closes To: 3” · 225 lbs. Step Over: 5.5” · Closes To: 3” · 265 lbs. (#2) Neck Bar $ 00 $ 00 (Left) FM30L (Left) FM30TL $ 00 FMNB$ 00 FMA25 FMA25T $ 00 109 895 945 (Right) FM30R 895 (Right) FM30TR 969
5% Off Sale Prices
450 Manual Chutes 750 Hydraulic Chutes Stationary Chute Only Portable Chute Only Stationary Chute Only Portable Chute Only Reg $3,92500 Sale $3,32900 Reg $6,00000 Sale $4,99500 Reg $11,33000 Sale $9,89500 Reg $13,20000 Sale $11,79500 (Tires Included) (Tires Included) 450 CHUTE OPTIONS OPTIONAL EQUIPMENT FOR HYDRAULIC CHUTES $ 00 A25 Head Gate FMA25 895 Reversible Headsweep FM75HS $88900 $ 00 A25 Calf Bar FMA25FBar 30 750 Palp Cage FM750PC $89900 $ 00 A25T Head Gate FMA25T 945 750 Palp Cage w/Wire Floor FM750PCWF $98900 $ 00 Model 30 Left Hand FM30L 895 750 Wire Floor Kit FM750WFK $45000 $ 00 Model 30 Right Hand FM30R 895 Brisket Bar FMBRISKET $19500 $ 00 Model 30T Left Hand FM30TL 969 180° Control Arm FM750CONTROLARM180 $52500 $ 00 Model 30T Right Hand FM30TR 969 Neck Door Ext. $41500 450 Palp Cage FM450PC $71500 Hydraulic Power Pack 450 Palp Cage w/Floor FM450PCF $79500 450 Palp Cage w/Wire Floor FM450PC-FW $82900 $ Split Tail Gate FM450STGLBOWKIT $69500 3,495 $ 00 8 HP Honda Engine Gas Powered Unit 450 Wire Floor FM450 S-WFK 450 • Cart fits in hydraulic chute $ 00 Neck Door Ext. 415 • 10” grease-able wheels with sealed bearings Brisket Bar FMBRISKET $19500 • Fold away handle Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com 18 All prices subject to change due to availability and market volatility. For-Most Equipment 5% Off Sale Prices Three drop down branding doors Calf Table open independently to provide plenty of access to the animal. Calf Table with Head Gate $ 00 A vertical sliding tailgate stays 1,659 upright when table is tipped to eliminate a separate gate to stop Calf Table Removable Calf Panel animals in alley. $ 00 Adjustable leg pin for separating the Self catching headgate opens 99 animals legs for castrating. wide for easy exit out of the chute. Headgate available separately. Calf Head Gate only $ 00 Optional removable foot panel for The table is equipped with a headboard 579 easy access to the animal’s feet and to aid in head restraint and less stress underside. while the animal is tipped on it’s side. Portable Scale Cage Pro-Series Tub & Alley SPECIFICATIONS • 9’4 inside length $ • 30” wide at top 6,900 • 3 different settings- 25”, 20” or 16” for calves • 5’7 tall sides with sheet metal extending 39” from floor • Tru-Test MP 800 load bars provide 6600 lbs capacity • EziWeigh 5i Indicator 8’ Tub - 16’ Adjustable Alley $ w/Cat Walk and Palp Door 9,695
Tub & Alley Systems Double alley system provides side-by-side exits from the tub. Tub working height: 5’6”, total height: 7’. Breaks down into seven sections with heaviest section weighing 200 pounds.
Custom Design Call for Quotes
5% Off Tub and alley setups shown with Sale Prices 6’V’d alley panels unless otherwise identified.
Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com All prices subject to change due to availability and market volatility. 19 Delta Harrows
5% Off Sale Prices
Delta Harrow Features 1. Two-way flexible tynes, cold-formed and built to last. 2. Our 5” of tyne means more tyne for your money - 5/8” diameter. Hydraulic Fold Harrows 3. Our cart frames use a sleeve and bolt-through mounting design for strength and are powder coated for durability. 5/8” Tynes 4. Designed to handle rough terrain, 15” tires with extra long bolt-through spindle and reinforced axle. 24’ Harrow 28’ Harrow 32’ Harrow 5. Hydraulic cylinder mount is made from 1” solid steel, $ $ $ maximizing flotation and durability. 8,195 8,895 9,995 6. Top mounted lift cylinder enhances flotation and longevity. 7. Extra long hitch tongue for sharp turning when paired 36’ Harrow 42’ Harrow with other equipment. $ $ 8. Heavy duty cast hitch, 2000 lb. jack, safety chain – standard equipment. 11,195 12,895
Manual Fold Harrows 5/8” Tynes 24’ Harrow $7,500 S3 Delta Broadcast Spreaders S3 Delta Harrows introduces an efficient, simple, broadcast spreader to cover land sizes from acreage yards to large pasture or hay fields. S3 Delta Spreaders can be used alone or together with Delta harrow modules and carriers to create the ideal combination. Broadcasting seed & fertilizer is a cost-effective method to apply material for many forage, cereal and cover crops, as well as conservation landscaping. Over-seeding or inter-seeding, together with the harrows, rejuvenates, thickens or improves the mix of existing growth, while dethatching and aerating the soil for maximum efficiency. Increase the nutritional value of pastures, hay crops, and the attractiveness of food plots. Spreader Features: Broadcast Spreader is available in two sizes: • Adjustable feed rate Acreage Hopper • Electric shut off (65 lbs to 175 lbs depending on material density) • Adjustable spread bias Ideal for use with smaller vehicles like ATV’s, Side by sides, • Adjustable spread restrictors and small tractors to cover yards and smaller areas. • Tipping hopper Mounting kits: • Remote on/off switch • ATV only, with 1 ¼” or 2” Receiver Spreader Specifications: • ATV & 3-Point Combo, with either 1 ¼” or 2” Receiver • SPREAD: Large, dense granules and seeds with • 3-Point Mount high disc speed give the maximum spread width • Cart Mount small, light granules and seeds will not spread as far. Pasture Hopper Examples: light grass seed up to 19’ and (75 lbs to 295 lbs depending on material density) large dense granules 75’ or more. Ideal for use behind small-to-large tractors to cover more acres. • POWER: 12v DC with continuous 25 amps Mounting kits: • ASSEMBLY: Simple bolt-together assembly, about 1 hour • 3-Point Mount • MOUNT: Mount varies by carrier, but all are simple • Cart Mount bolt-on attachments with minimal time required. $2,895 Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com 20 All prices subject to change due to availability and market volatility. Rhino Planetary Drive Diggers H Series H 200 07710019 $2,595 H 300 07710020 $2,695 H 350 07710021 $2,795 Mounting Units (if purchased alone) Universal Skid Steer Quick Tach 00776622 $495 Front End Loader Mount 00776623 $349 HSDA Auger for Planetary Drive Diggers Soil, Clay or Loose Rock Unmatched 4” auger 00010600 $255 6” auger 00776634 $285 Rhino 9” auger 00776635 $409 Warranties 12” auger 00776636 $449 18” auger 00776637 $669 24” auger 00776638 $798 30” auger 00776639 $1,119 36” auger 00776640 $1,349 HRAD Auger for Planetary Drive Diggers 5% Off Soil, Hard Clay, Loose or Solid Rock or Concrete Sale Prices 9” auger 00776644 $1,195 12” auger 00776645 $1,449 18” auger 00776646 $1,895 24” auger 00776647 $2,195 Planetary Drive Diggers T Post Puff Auger for Planetary Drive Diggers N Series Solid Rock $ 00 2” auger 00776653 $389 N 15 07720015 6-15 GPM 1,929 N 20 07720020 10-20 GPM $1,94500 HSRA Auger N 30 07720030 15-30 GPM $1,99500 Loose or Solid Rock or Concrete $ 4 ½” auger 00776632 695 N 30 Planetary Drive Digger with 6” auger 00776633 $995 Auger Adapters Skid Steer plate 9” and 12” augers 07720030 $ $ 00 2” Hex - 2 9/16” Round 10921 259 Reg. $3,69800 Sale 3,295 2” Hex - 2” Round 10922 $255 2 9/16” - 2” Hex 10923 $179 2 9/16” Round - 2” Round 10924 $179 N 30 Planetary Drive Digger with 2” Round - 2” Hex 10925 $159 Loader Mounts 9” and 12” augers 2” Round - 2 9/16” Round 10926 $169 07720030 $ 00 $ 00 Auger Extensions Reg. 3,548 Sale 3,159 24”...... 2” Hex 10911 $229 48” ...... 2” Hex 10912 $309 H Series 24” ...... 2” Round 10918 $189 • Industrial, commercial and agricultural applications Bits • Works well in soil, loose or solid rock and concrete HSDA Auger Bits H300 Planetary Drive Digger with Regular Hex 180231 $5.95 Skid Steer plate 9” and 12” augers Hard Surface Hex 180236 $11.95 07710020 $ 00 Carbide Hex 180232 $25.95 Reg. $4,39100 Sale 3,895 40-50 Aggressor Bits Regular Round 180237 $7.95 $ H300 Planetary Drive Digger with Front End Hard Surface Round 180233 22.50 Loader Mounts 9” and 12” augers Carbide Round 180239 $39.50 $ 07710020 Bullets 180230 9.95 $ 00 $ 00 Drive In 180238 $7.95 Reg. 4,193 Sale 3,795 Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com All prices subject to change due to availability and market volatility. 21 Equipment Super Zero-Turn-Radius Mowers Heavy Duty Bush Hog Model HDZ3373 • 73” Deck Width $ •Center-mounted fuel tank • 33 HP Kohler Motor - Fuel Injected 10,995 •Quick setup •Keyless Start / Stop • Rotary controlled deck height adjustment •Fuel level indicator (multi-bars) • Full Feature Control Module •Tachometer / hourmeter • Anti-Vibration Isolators •Safety interlock indicators: • HG-5400 Transaxles PTO, park brake, handles, seat •Low oil indicator •24 x 12-12 Drive Tires •Soft start on PTO •Future add-ons: Power lift, lights Bush Hog Model HDZ3361 Bush Hog Model HDZ3161 • 61” Deck Width $ • 61” Deck Width $ • 33 HP Kohler Motor - Fuel Injected 9,995 • Kawasaki FX921V - 31 HP Motor 9,595 • Rotary controlled deck height adjustment • Rotary controlled deck height adjustment • Full Feature Control Module • Full Feature Control Module • Anti-Vibration Isolators • Anti-Vibration Isolators • HG-5400 Transaxles • HG-5400 Transaxles •24 x 12-12 Drive Tires •24 x 12-12 Drive Tires
•10’ wide Pasture Aerator •4” x 4” x 5/16” mainframe construction Pull-Type Box Scraper •Hydraulically adjustable transport wheel •All-metal weight box welded to the frame 144” Width • 18” Height •Rotors can be adjusted 2½˚, 5˚, & 7½˚ 2 3/4 Yards Box Capacity •Heavy-duty grease-able bearings Box Depth 39” Reg $12,787 Reg $5,781 Sale $10,695 Sale $4,995
Blades 2500 Rear Blade 12’ All Hydraulic with Swing, Pivot & Tilt Dual Gauge Wheels w/Quick-Tach End Plates Reg $14,429 Sale $11,795 1540 Rear Blade 10’ All Hydraulic with Swing, Pivot & Tilt o verything oad Dual Gauge Wheels w/Quick-Tach End Plates D E A R Excellent for Ranch Driveways Grader Can $ $ 5% Off Reg 10,436 Sale 8,595 Sale Prices Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com 22 All prices subject to change due to availability and market volatility. Mowers 5% Off Sale Prices Rhino Heavy Duty Rotary Mowers SALE PRICE 148...... 4ft...... 3PT 540 PTO with Shear Bolt...... $1,195 160...... 5ft...... 3PT 540 PTO with Slip Clutch...... $1,695 172...... 6ft...... 3PT 540 PTO with Slip Clutch & Defectors...... $2,195 184...... 7ft...... 3PT 540 PTO with Chain Guards...... $3,495 272 ...... 6ft...... 3PT 540 PTO with Chain Guards...... $2,595 SK60...... 5ft...... Skid Steer Mower Med Vol 15-20GPM...... $6,195
SE Series Mowers SALE PRICE SE8A...... 8ft...... 3PT 540 PTO with Chain Guards...... $5,295 SE10A...... 10ft...... 3PT 540 PTO with Chain Guards...... $6,795
•Cross-Braced Pan Blade Carriers •CAT 1 Quick-Hitch Compatible •Close-Coupled Design •Torque Dampeners on Side Drivelines
Turbo Series Rotary Cutters Call for Turbo 96.....8ft..... 3PT 540 PTO with Chain Guards Pricing Turbo 96.....8ft..... 3PT 1,000 PTO with Chain Guards
•Double-Layered Deck for Optimal Durability and Easy Clean-Off •Smooth Obstruction Free Underside of Deck •Deep Deck for Larger Volume of Material •Cross-Braced Blade Pan Carrier 5% Off Sale Prices 96” Cut Flex-Wing Mowers
Zero-Turn-Radius Mower Twister 4150 Flex-Wing w/Deck Rings 20 HP Kohler Courage V-Twin Engine Standard Pivoting Hitch 1,000 RPM PTO 44” Mowing Width Foam Filled Tires Chain Guards $4,895 4” Diameter Cutting Capability Call for Pricing Cammack Ranch Supply • 800-828-2829 • www.cammackranchsupply.com All prices subject to change due to availability and market volatility. 23 CUSTOM STRUCTURES
Commercial
• Clear spans of up to 120 ft. • Cattle Barns • No height restrictions • Residential • High wind resistance Free • Commercial • Energy Efficient Estimates • Swine Confinements • Competitive Price • Equestrian Buildings • Better Insurance Rating Call to Plan Your Projects Now
PO Box 100 Union Center, SD 57787 605-985-5591 www.cammackranchsupply.com