TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SATS 1 2012-04-30 1 Accreditation and supervision of collection 20.00 2011-09-30 046-09 societies in music industry

SANS 4 SABS 4 2010-12-24 4 Locks, latches, and associated furniture for 30.20 2013-04-22 1014-02 91.060.50 doors (Domestic Type)

SANS 19 2012-06-30 2 The inspection, testing and examination of 35.20 2014-08-20 096 53.020.20 mobile cranes

SANS 19 1.01 The inspection, testing and examination of 30.20 2011-03-16 096 53.020.20 mobile cranes

SANS 67 2015-12-31 1 Technical type-approval requirements for 20.00 2014-08-15 074-04 switching systems, for connection to the South African public and private switching networks

ARP 062-1 2015-01-31 2 Recommendations for small renewable energy IEC 62257:2013 IDT 20.00 2014-09-19 069 and hybrid systems for rural electrification - Part 1: General introduction to IEC 62257 series and rural electrification

SANS 151 SABS 151 2015-05-31 8 Fixed electric storage water heaters 30.20 2014-08-19 075 91.140.65 97.100.10

SANS 163-1 SABS ISO 10304-1 2015-02-28 2 Water quality - Determination of dissolved ISO 10304-1:2007 IDT 20.00 2014-10-03 147-06 13.060.50 anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, phosphate and sulfate

SANS 181 SABS 181 2013-12-27 4 Thermostats for electric storage water heaters 30.20 2013-09-11 075 17.200.20 91.140.65

SANS 184 SABS SM 667 2009-12-24 2 The determination of peeling load of direct 20.00 2007-03-02 216 61.060 moulded footwear

SANS 199 SABS 199 3.01 Shut-off valves for transportable, refillable 50.70 2014-02-10 1019 23.060.40 liquefied petroleum gas cylinders

SANS 207 2014-09-30 2 The design and construction of reinforced soils 20.00 2014-03-14 098-06 93.020 and fills

SANS 241-1 2013-08-30 2 Drinking water Part 1: Microbiological, 50.60 2014-04-25 147 13.060.20 physical, aesthetic and chemical determinands

SANS 241-2 2013-08-30 2 Drinking water Part 2: Application of SANS 50.60 2014-04-25 147 13.060.20 241-1

SANS 246 2014-08-31 2 Code of practice for fire protection for BS 6266:2011 IDT 20.00 2014-05-30 021-01 13.220.20 electronic equipment installations 29.260.20

A- 1 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 295 SABS 295 2014-08-29 4 Calcium hypochlorite 20.00 2013-06-14 1006-03 71.100

SANS 316 SABS 316 2009-06-30 4 Industrial hand protectors (leather and fabric) 20.00 2007-01-26 120-03 13.340.10 and leather protective clothing 13.340.40

SANS 329 2016-03-31 3 Industrial thermoprocessing equipment - 20.00 2014-10-03 1019 25.180.01 Safety requirements for combustion and fuel- handling systems

SANS 376 2015-03-31 2 Standard test methods for arsenic in water ASTM D 2972:2008 IDT 50.20 2014-10-13 147-06 13.060.50

SANS 457-2 SABS 457-2 2014-09-30 7 Wooden poles, droppers, guardrail posts and 30.20 2014-04-15 218 79.080 spacer blocks Part 2: Softwood species 91.090

SANS 472 2014-11-30 2 Oriented Strand Boards (OSB) - Definitions, EN 300:2006 IDT 50.60 2014-09-23 1008 01.040.79 classification and specifications 79.060.20

SANS 482 2012-06-30 1 Body bags 20.00 2010-05-14 1048

SANS 494-2 2009-06-30 1 Sterile surgical medical devices used for 35.20 2014-04-02 1039 11.040.30 wound closure Part 2: Surgical needles

SANS 511 2014-12-31 2 Women's workwear 20.00 2014-01-17 1195 61.020

SANS 517 2014-07-31 2 Light steel frame building 20.00 2014-01-31 098-03 91.080.10

SANS 530-9 2014-08-31 2 Fire detection and fire alarm systems for BS 5839-9:2011 IDT 50.20 2014-10-14 021-01 13.220.20 buildings Part 9: Code of practice for the 13.320 design, installation, commissioning and maintenance of emergency voice communication systems

SANS 534-1 2014-12-31 3 Vehicle security - Whole-of-vehicle marking 20.00 2014-08-08 1096 13.310 Part 1: Microdot systems

SANS 535 2007-11-30 1 Vehicle security - Telemetry systems 20.00 2006-09-08 1096 13.310

SANS 536 2008-07-31 1 Design and construction of high-pressure 20.00 2007-01-19 082-05 73.020 underground water bulkheads

SANS 543 SABS 543 2015-06-30 5 Fire hose reels 20.00 2014-06-20 021-04 13.220.10

SANS 551 2015-09-30 2 Detonators, relays and explosives initiating 20.00 2014-06-27 1064 71.100.30 devices for commercial applications

A- 2 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 555-1 2014-09-30 1 Fluids for electrotechnical applications Part 1: IEC 60296:2013 MOD 20.00 2013-10-11 028-02 Unused inhibited mineral insulating oils for transformers and switchgear

SANS 555-2 2014-09-30 1 Fluids for electrotechnical applications Part 2: IEC 60296:2013 MOD 20.00 2013-10-11 028-02 Unused uninhibited mineral insulating oils for transformers and switchgear

SANS 555-3 2014-10-30 1 Fluids for electrotechnical applications Part 3: 20.00 2014-01-17 028-02 Reclaimed inhibited mineral oil for transformers and switch gear

SANS 555-4 2014-03-31 1 Fluids for electrotechnical applications Part 4: 20.00 2014-01-17 028-02 Reclaimed uninhibited mineral oil for transformers and switch gear

SANS 556-2-2 2012-12-28 1 Low-voltage switchgear Part 2-2: Earth 50.60 2014-06-09 067-02 leakage switches

SANS 583 2012-03-31 1 Non-integrated work platforms (cradles) 30.20 2013-02-13 110

SANS 587 SABS 587 2015-12-31 3 Canned fish, canned marine molluscs and 20.00 2014-09-19 234 07.100.30 canned crustaceans, and products derived 67.120.30 therefrom

SANS 644 SABS 644 2008-12-24 2 Boot and shoe sizing and marking 20.00 2007-01-26 137 61.060 (Mondopoint system)

SANS 649 2008-12-24 1 Support quality assurance for timber and 20.00 2007-06-29 082-04 03.120.10 cementation (cast) packs 55.040 79.040

SANS 653 2008-12-24 1 Support quality assurance for prestressing 20.00 2007-06-29 082-04 03.120.10 devices 77.140.15

SANS 654 2008-12-24 1 Support quality assurance for permanent steel 20.00 2007-06-29 082-04 03.120.10 and timber elongates 91.080.01

SANS 655 2008-12-24 1 Support quality assurance for removable steel 20.00 2007-06-29 082-04 03.120.10 props 73.100.01

SANS 659 SABS 659 2010-06-30 4 Sterilized injections based on lidocaine 20.00 2009-01-23 106 11.060.10 (lignocaine) hydrochloride for dental use 11.120.10

SANS 722 SABS 722 2008-12-24 4 The production of infants' and children's shoes 20.00 2007-01-26 216 61.060 (stuck-on and stitch-down construction)

SANS 739 2010-02-28 1 Pulmonary filters for spirometry - Bacterial test 20.00 2008-02-08 1039 11.040.10 method to assess filtration performance

A- 3 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 744 2010-07-31 1 Closing of redundant mine openings 20.00 2008-07-04 207 73.020

SANS 762 2014-12-31 2 Assessment of inadvertent initiation of bridge PD CLC/TR 50426:2004 IDT 20.00 2014-09-05 1064 13.230 wire electro-explosive devices by radio- 33.060.20 frequency radiation - Guide

SANS 783 2012-05-31 1 Funiculars 20.00 2010-05-14 1082 45.100

SANS 822 SABS 822 2014-07-31 2 Sizes of paper and envelopes 20.00 2013-05-17 006-01 85.080.10

SANS 827 2015-02-28 2 The installation of pipes and appliances for 20.00 2013-08-23 1019 75.060 use with natural gas 91.140.40

SANS 867 2011-04-30 1 Elastic-sided chelsea boots 20.00 2010-03-26 216 61.060

SANS 882 2014-10-31 2 Envelopes 20.00 2014-03-07 006-01 85.080

SANS 885 SABS 885 2016-03-31 4 Processed meat products 20.00 2014-02-21 1027 67.120.10

SANS 893-1 2016-04-30 2 Legionnaires' disease Part 1: Risk 20.00 2014-10-03 147-04 13.020 assessment 13.020.30 13.020.40 13.060

SANS 893-2 2016-04-30 2 Legionnaires' disease Part 2: The control of 20.00 2014-10-03 147-04 13.020 Legionella in water systems 13.020.30 13.020.40 13.060

SANS 909 2010-07-31 1 Pet food - Nutritional and manufacturing 35.20 2014-10-08 034-13 requirements

SANS 918 2011-06-30 1 Electronic Vehicle Identification data exchange 20.00 2009-03-13 204 03.220.20 of vehicle spotting data 35.240.60

SANS 919 2011-06-30 1 High integrity data structure for a vehicle 20.00 2009-03-13 204 03.220.20 identifier token or number plate 35.240.60

SANS 922 2011-02-28 1 Electrically powered chain hoists 20.00 2009-01-23 1020 53.020.30 53.020.99

SANS 923 2010-04-30 1 Taximeters 50.60 2011-04-01 070

SANS 929 SABS 929 2014-07-31 3 Plywood and composite board 30.60 2012-10-26 1008 79.060.10

A- 4 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 945-1 SABS 945-1 2016-02-28 3 Support and compression bandages Part 1: 20.00 2014-05-09 038-03 11.040.30 Woven crêpe bandages 59.080.30

SANS 949 SABS 949 2012-02-29 3 Strongroom and vault doors 20.00 2010-10-22 1014-01 13.310 91.060.50

SANS 956-1 2015-12-31 2 Financial services - UNIversal Financial ISO 20022-1:2013 IDT 20.00 2014-10-10 168 03.060 Industry message scheme Part 1: Overall 35.240.40 methodology and format specifications for inputs to and outputs from the ISO 20022 Repository

SANS 956-2 2014-12-31 2 Financial services - UNIversal Financial ISO 20022-2:2013 IDT 20.00 2014-10-10 168 03.060 Industry message scheme Part 2: Roles and responsibilities of the registration bodies

SANS 956-3 2014-12-31 1 Financial services - Universal financial industry ISO 20022-3:2013 IDT 20.00 2014-10-10 168 message scheme - Part 3: Modelling

SANS 956-4 2014-12-31 1 Financial services - Universal financial industry ISO 20022-4:2013 IDT 20.00 2014-10-10 168 message scheme - Part 4: XML Schema generation

SANS 956-5 2014-12-31 1 Financial services- Universal financial industry ISO 20022-5:2013 IDT 20.00 2014-10-10 168 message scheme - Part 5: Reverse engineering

SANS 956-6 2014-12-31 2 Financial services - UNIversal Financial ISO 20022-6:2013 IDT 20.00 2014-10-10 168 03.060 Industry message scheme Part 6: Message 35.240.40 Transport Characteristics

SANS 961 2010-08-31 1 Vehicle classifications 30.20 2011-06-03 022 43.020

SANS 969 2013-06-30 1 Clean-up of road chemical spillages 20.00 2011-08-26 207

SANS 983 2011-02-28 1 Anti-split nail plate 20.00 2009-09-04 218

SANS 987 2013-10-30 1 Adiabatic determination of spontaneous 20.00 2013-04-12 027-05 combustion

SANS 995 SABS 995 2009-12-24 3 Chamois leathers 20.00 2007-03-09 120-03 59.140.30

SANS 1016 2011-04-30 1 Laminated leather 20.00 2010-03-26 120-02

SANS 1025 2012-01-31 1 Animal drawn carts 30.20 2011-01-13 1089

SANS 1031 2012-01-31 1 Harnesses 50.60 2014-10-24 1089

A- 5 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 1035 2012-03-31 1 Rail-bound rolling stock lifting jacks used for 50.60 2014-07-07 1020 underground and industrial applications

SANS 1050-1 2011-06-30 1 Laboratory controlled environments Part 1: 50.20 2014-08-28 048-01 07.080 Microbiological safety cabinets - Class I 07.100.01

SANS 1050-2 2011-06-30 1 Laboratory controlled environments Part 2: 30.20 2011-06-20 048-01 07.080 Microbiological safety cabinets - Class II 07.100.01

SANS 1050-3 2011-06-30 1 Laboratory controlled environments Part 2: 20.00 2011-02-24 048-01 07.080 Microbiological safety cabinets Class III 07.100.01

SANS 1063 SABS 1063 2015-03-31 4 Earth rods, couplers and connections 30.20 2014-09-19 067-06 29.120.50

SANS 1094 2012-07-31 1 Spinal needles 20.00 2010-06-04 1039 11.040.25

SANS 1103 2012-06-30 1 Electric vehicle propulsion systems 20.00 2010-08-27 022-09 43.120

SANS 1116-1 SABS 1116-1 2014-05-31 4 Retro-reflective number plates for motor 20.00 2013-07-12 1070-01 43.040.60 vehicles Part 1: Blank plates (aluminium)

SANS 1116-2 SABS 1116-2 2014-05-31 6 Retro-reflective number plates for motor 20.00 2013-07-12 1070-01 43.040.60 vehicles Part 2: Number plates (aluminium)

SANS 1116-3 SABS 1116-3 2014-05-31 4 Retro-reflective number plates for motor 20.00 2013-07-12 1070-01 43.040.60 vehicles Part 3: Blank plates (plastics)

SANS 1116-4 SABS 1116-4 2014-05-31 6 Retro-reflective number plates for motor 20.00 2013-08-23 1070-01 43.040.60 vehicles Part 4: Number plates (plastics)

SANS 1135 2012-03-31 1 Wireless communication site engineering 30.70 2011-09-17 074-05

SANS 1140 2012-09-30 1 Requirements for webbing material, chains 30.20 2013-05-30 1067 and ropes for cargo securement

SANS 1147 SABS 1147 2009-06-30 2 Leather school bags and school brief-cases 20.00 2007-01-26 120-03 59.140.35

SANS 1153 2016-02-16 1 Honey production and processing 20.00 2014-03-14 034-20

SANS 1158 2012-10-31 1 Repair of alloy wheels 30.20 2014-08-18 031 43.040.50 77.150.10

SANS 1184 2013-01-29 1 Minimum requirements for the repair of 20.00 2011-01-21 022-05 windscreens

SANS 1188 SABS 1188 2010-02-28 2 Dental injection needles (sterile-packed for 20.00 2008-08-22 106 11.040.20 single dose)

A- 6 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 1215 SABS 1215 2014-03-31 2 Concrete masonry units 20.00 2013-02-08 081-01 91.100.30

SANS 1229 2015-03-31 1 Processed core-spun ducks 20.00 2014-10-03 038-02

SANS 1234 2015-03-31 1 Unproofed core-spun ducks 20.00 2014-10-03 038-02

SANS 1238 SABS 1238 2012-03-31 3 Air-conditioning ductwork 20.00 2011-03-31 086 91.140.30

SANS 1258 2015-03-31 1 Processed and low-flammable polyester 20.00 2014-10-03 038-02 canvas

SANS 1271 SABS 1271 2010-02-28 4 Sterilized mepivacaine hydrochloride injection 35.20 2008-11-13 106 11.060.10 for dental use 11.120.10

SANS 1295 2014-02-28 1 Rational use of energy - Thermal efficiency on 20.00 2013-05-24 1019 gas appliances

SANS 1297 SABS 1297 2009-06-30 2 Leather gloves 20.00 2007-01-26 120-03 59.140.35 61.040

SANS 1298 SABS 1298 2009-06-30 2 Ladies' fashion handbags 20.00 2007-01-26 120-03 59.140.35

SANS 1299 2015-06-30 2 Tempering valves for storage hot water 20.00 2014-05-09 138-02 23.060.40 systems

SANS 1318 2013-11-30 1 Scholastic stationery 20.00 2011-08-19 006-01

SANS 1325 2013-12-24 1 Classification of high visibility clothing 20.00 2011-08-19 1194-02

SANS 1327 SABS 1327 1.05 Electrical connectors for towing and towed 50.20 2011-02-01 022-08 43.040.10 vehicles (7-pole connectors)

SANS 1337 SABS 1337 2009-12-24 2 Dental zinc oxide-eugenol impression paste 35.20 2009-01-23 106 11.060.10

SANS 1339 SABS 1339 2015-05-31 5 Electric cables - Cross-linked polyethylene 20.00 2014-09-19 066 29.060.20 (XLPE) insulated cables for rated voltages 29.240.20 3,8/6,6 kV to 19/33 kV

SANS 1346 2014-07-31 1 Domestic instantaneous solar water heaters 20.00 2011-07-22 1057

SANS 1363 SABS 1363 2008-12-24 3 Young people's shoes (stuck-on and stitch- 20.00 2007-01-26 216 61.060 down constructions)

SANS 1364 2013-12-24 1 General requirements for brushware 20.00 2011-10-21 1079

A- 7 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 1369 2014-02-28 1 Organic agriculture production and processing 20.00 2012-02-03 2110

SANS 1377 2014-07-31 1 Olive oil and pomace olive oil 30.20 2014-01-22 034-11

SANS 1395-1 2013-11-29 1 Road transport management systems Part 1: 50.20 2014-09-30 181B 03.220.20 Operator requirements - Goods

SANS 1395-2 2013-11-29 1 Road transport management systems Part 2: 20.00 2012-02-17 181B Consignor requirements - Goods

SANS 1395-3 2013-11-29 1 Road transport management systems Part 3: 20.00 2012-02-17 181B Consignee requirements - Goods

SANS 1408 SABS 1408 2008-07-31 3 Mechanical components for tendon based 20.00 2007-05-25 082-04 21.060.10 rock support systems 21.060.20

SANS 1427 SABS 1427 2011-10-31 3 Retention (conforming) bandages 20.00 2010-02-12 038-03 11.040.30

SANS 1451-1 SABS 1451-1 1.03 Hearing protectors Part 1: Ear-muffs 50.20 2014-01-14 076 13.340.20

SANS 1459 SABS 1459 2014-08-31 2 Traffic lights 30.20 2014-07-18 064 29.140.40 93.080.40

SANS 1461 2014-06-30 1 Risk assessment under major hazards 20.00 2012-11-02 223 installation

SANS 1462 2014-02-28 1 Automotive fuel ethanol - Quality management 50.20 2014-09-02 028-03 03.120.10 system - Producer requirements 71.020 75.160.20

SANS 1466-1 2014-12-31 1 Information technology - Process 50.60 2014-01-06 175 25.040 benchmarking framework Part 1: Concepts 35.080 and overview 35.240

SANS 1466-2 2014-03-31 1 Information technology - Process 50.60 2014-01-06 175 benchmarking framework Part 2: Generic process model

SANS 1466-3 2015-06-30 1 Information technology - Process 30.20 2014-05-22 175 benchmarking framework Part 3: SANS/ISO 9001 mapping to the generic process model

SANS 1466-4 2015-06-30 1 Information technology - Process 30.20 2014-05-22 175 benchmarking framework Part 4: SANS/ISO/IEC 12207 mapping to the generic process model

A- 8 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SATR 1466-5 2015-06-30 1 Information technology - Process 30.20 2014-05-22 175 benchmarking framework Part 5: CMMI mapping to the generic process model

SANS 1478 2014-03-31 1 Pig welfare 20.00 2013-06-14 1094

SANS 1496 SABS 1496 2013-12-31 2 Wheel flaps fitted to motor vehicles 20.00 2013-07-05 022 43.040.60

SANS 1504 SABS 1504 2008-09-30 2 Prestressed concrete lintels 50.60 2013-12-18 081-01 91.100.40

SANS 1507-5 SABS 1507-5 1.04 Electric cables with extruded solid dielectric 35.20 2014-07-03 066 29.060.20 insulation for fixed installations (300/500 V to 1 29.240.20 900/3 300 V) Part 5: Halogen-free distribution cables

SANS 1515-3-1 2013-02-28 1 Gas measuring equipment primarily for use in 50.60 2013-07-08 065 13.220.20 mines Part 3-1: Battery-operated portable, 29.260.20 toxic gas measuring instruments and warning devices

SANS 1515-3-2 2013-03-28 1 Gas measuring equipment primarily for use in 50.60 2013-07-08 065 13.220.20 mines Part 3-2: Fixed, transportable, and 29.260.20 vehicle-mounted toxic gas measuring and warning sensor heads, instruments and devices

SANS 1515-3 2013-03-29 1 Gas measuring equipment primarily for use in 50.60 2013-07-08 065 13.220.20 mines Part 3: Gas performance requirements 29.260.20 for toxic gas measuring instruments and warning devices

SANS 1515-4-1 2014-01-31 1 Gas measuring equipment primarily for use in 50.60 2014-10-12 065 13.220.20 mines Part 4-1: Battery-operated portable, 29.260.20 oxygen-deficient/oxygen-enriched measuring instruments and warning devices

SANS 1515-4 2013-03-29 1 Gas measuring equipment primarily for use in 50.60 2013-07-22 065 13.220.20 mines Part 4: Gas performance requirements 29.260.20 for oxygen-deficient/oxygen-enriched measuring instruments and warning devices

SANS 1515-5 2015-03-31 1 Gas measuring equipment primarily for use in 20.00 2014-08-08 065 13.220.20 mines Part 5: Fixed and stationary toxic-gas 29.260.20 measuring instruments and warning devices

SANS 1520-1 SABS 1520-1 2013-09-30 2 Flexible electric trailing cables for use in mines 50.60 2014-02-04 066 29.060.20 Part 1: Low-voltage (640/1 100 V and 1 900/3 29.260.20 300 V) cables

A- 9 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 1523 SABS 1523 2009-12-24 2 Sheepskins (for medical use) 20.00 2007-03-09 120-03 11.040.60

SANS 1526 SABS 1526 2014-07-31 3 Thermoplastics sheeting for use as a 30.60 2014-10-07 081-05 91.100.50 geomembrane

SANS 1534 SABS 1534 2008-12-24 2 Resin capsules for use with tendon based 20.00 2007-07-13 082-04 73.020 support systems

SANS 1540 SABS 1540 2009-06-30 2 Men's and women's leather belts 20.00 2007-01-26 120-03 61.040

SANS 1544 1 Energy performance certificates for buildings 50.60 2014-09-09 059-01 17.220.20 91.140.50

SANS 1545-4 SABS 1545-4 2011-09-30 2 Safety rules for the construction and 50.60 2010-10-25 1082 11.180.10 installation of lifts Part 4: Lifts for persons with 91.140.90 disabilities (vertical lifting platforms)

SANS 1546 2013-05-13 1 Dried mopane worms 30.20 2014-09-30 1027

SANS 1548-1 2014-02-28 1 Use of recycled plastic material intended to 20.00 2013-02-08 1001-06 come into contact with food Part 1: PET

SANS 1590 2014-08-10 1 Supply chain specifications for white 20.00 2013-04-12 028-03 petroleum products

SANS 1598 SABS 1598 2013-12-30 3 Automotive fuels - Requirements and test 50.20 2014-08-28 028-03 75.160.20 methods for petrol

SANS 1604 2015-02-05 1 Cleaning and degreasing compounds - 20.00 2013-10-18 1006-02 Biologically-based

SANS 1605 2014-12-31 1 Consumer product recall - Guidelines for ISO 10393:2013 IDT 50.60 2014-03-27 007 suppliers

SANS 1606 2014-12-31 1 Accreditation of agricultural remedies 35.20 2014-07-01 1028 03.120.20 distributors

SANS 1608 2015-01-31 1 Paperbags for direct food packaging 20.00 2013-05-17 006-02

SANS 1631 2014-08-31 1 Plastic based push-fit fittings for copper tubes 30.20 2014-06-02 138-04 23.040.45 77.150.30

SANS 1633 2014-07-31 1 Part-worn tyres 30.20 2014-08-14 031

SANS 1634 2014-12-31 1 Specification for barrier protection systems for 20.00 2013-09-06 218 treated wooden poles

A- 10 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 1638 SABS 1638 2015-06-30 3 Pneumatically powered chain hoists 20.00 2014-08-22 1020 53.020.99

SANS 1647 2013-12-31 1 Approved market names for South African fish 20.00 2013-09-20 234 and related seafood species

SANS 1650 SABS 1650 2008-12-24 2 Measuring systems for liquid other than water 20.00 2008-07-11 070-02 75.180.30

SANS 1654 SABS 1654 2.01 DC-powered (battery-operated) machines for 50.60 2014-10-26 065 29.260.20 use in hazardous locations in mines

SANS 1657 SABS 1657 2.03 Bottled water of subterranean origin 50.20 2014-09-19 1037 13.060.10 13.060.20 67.160.20

SANS 1662 2014-01-31 1 Self-ballasted LED tubular lamps for general 50.20 2014-10-09 064-01 29.140.30 lighting services for voltage > 50 V - Safety specification.

SANS 1664 2014-01-31 1 Semi-luminaires for T5 fluorescent lamps - 50.20 2014-09-23 064-02 29.140.30 Safety requirements 29.140.40

SANS 1665 2014-12-31 1 Envelopes for X-ray films 20.00 2013-10-04 006

SANS 1675 SABS 1675 2009-11-30 2 The manufacture, production, processing and 20.00 2008-05-30 1027 67.120.10 treatment of canned meat products

SANS 1677 2014-02-21 1 SABS Guide 14001 - Legal compliance as a 20.00 2014-02-21 207 part of accredited ISO 14001:2004 certification

SANS 1680 2014-12-31 1 Live rock lobster 50.60 2014-10-17 234

SANS 1682 2014-06-30 1 Covers for residential swimming pools 20.00 2014-01-17 059-05

SANS 1683 2014-12-01 1 Moringa 30.20 2014-07-14 1097

SANS 1684 2015-09-30 1 INHERENT flame retard fabrics 20.00 2014-01-17 038-02

SANS 1685 2014-06-30 1 Theatre safety 20.00 2014-01-31 264

SANS 1686 2014-12-31 1 Crafts 20.00 2014-03-07 1045

SANS 1687 2015-12-30 1 Heat pump water heaters performance 20.00 2014-04-11 1057 standard

SANS 1688 2016-10-31 1 Conformity assessment for African traditional 20.00 2014-08-15 1097 medicine preparations

A- 11 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 1690 2015-03-01 1 Guide for the implementation of SANS 1162 20.00 2014-07-04 228 Responsible tourism

SANS 1692 2014-12-31 1 Household electric cooking appliances - Part EN 60350-1:2013 IDT 50.20 2014-10-07 075 97.040.20 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance EN common modification

SANS 1695 2014-12-31 1 Clothes washing machines for household use - EN 60456:2011 IDT 50.20 2014-10-07 075 97.060 Methods for measuring the performance EN common modification

SANS 1704 2015-01-31 1 Tumble dryers for household use - Methods EN 61121:2013 IDT 50.20 2014-10-07 075 97.060 for measuring the performance - EN Common Modification

SATS 1705 2015-07-30 1 Rational designs and assessments for energy 20.00 2014-08-08 060 91.040.01 usage in buildings in terms of SANS 10400- 91.060.01 XA: A modelling and simulation protocol

SANS 1706 2015-07-31 1 Analysis of CCA treated wood by X-ray 30.20 2014-10-10 218 fluorescence spectroscopy

SANS 1718-2 SABS 1718-2 2011-03-31 4 Gaming equipment Part 2: Limited payout 30.20 2010-05-25 1095 35.240.99 gaming equipment 97.200.99

SANS 1718-3 SABS 1718-3 2010-02-28 3 Gaming equipment Part 3: Monitoring and 50.60 2010-02-12 1095 35.240.99 control systems for gaming equipment 97.200.99

SANS 1718-9 SABS 1718-9 2011-03-31 3 Gaming equipment Part 9: Central monitoring 30.20 2010-05-25 1095 35.240.99 system for limited payout machines 97.200.99

SANS 1719 2015-02-28 1 Set-top box decoder for free-to-air Direct-to- 20.00 2014-08-08 074-03 Home (DTH) digital satellite Television

SANS 1725 2015-12-31 1 End-user related Quality of Service parameter 20.00 2014-08-15 074 definitions and measurements; Part 1: GSM voice

SATR 1727 2015-01-31 1 Information technology - Security techniques - ISO/IEC TR 20004:2004 IDT 50.20 2014-10-10 001-27 35.040 Refining software vulnerability analysis under ISO/IEC 15408 and ISO/IEC 18045

SANS 1728 2015-09-30 1 The requirements for the marking and 20.00 2014-09-12 1001 identification of degradable plastics

SANS 1745 SABS 1745 2008-12-24 2 Cementitious grouting capsules for use with 20.00 2007-07-13 082-04 73.020 tendon-based support systems 91.100.10

A- 12 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 1774 SABS 1774 2015-12-31 2 Liquefied petroleum gases 20.00 2014-10-10 028-03 75.160.30

SANS 1775-3 2009-02-28 1 Intravenous infusion and transfusion 30.20 2014-05-22 1036 11.040.20 equipment (sterile-packed for single use) Part 3: Transfusion sets

SANS 1775-5 2009-02-28 1 Intravenous infusion and transfusion 20.00 2007-08-24 1036 11.040.20 equipment (sterile-packed for single use) Part 5: Extension sets

SANS 1783-5-1 2013-08-31 1 Structural timber - Procedures for the 30.20 2014-01-17 1008 confirmation that stress-graded softwood timber and such finger jointed timber meet structural requirements

SANS 1783-5-2 2013-08-31 1 Structural timber - Continuous assurance that 30.20 2014-01-17 1008 timber so graded or finger-jointed meets grade requirements

SANS 1789 2015-02-28 1 Standard test method for determination of ASTM C 1371:2010 IDT 20.00 2014-10-03 081-09 emittance of materials near room temparature usingportable emissometers

SANS 1795-5 SABS 1795-5 2012-06-30 2 Road traffic law enforcement systems Part 5: 20.00 2010-05-28 078 17.080 Data capturing and recording devices for road traffic law enforcement

SANS 1824 2012-12-24 2 Beam trolleys (crawls) 20.00 2010-11-26 1020 53.020.30

SANS 1838-1 SABS 1838-1 2012-06-30 2 Electronic self-indicating road vehicle mass 30.20 2013-10-24 078 17.060 measuring equipment for use by road traffic 17.100 authorities Part 1: Non-automatic mass measuring equipment for static mass measurement

SANS 1862 SABS 1862 2006-12-24 2 Packaged water other than natural mineral 20.00 2006-03-03 1037 13.060.20 water

SANS 1866-1 2013-09-30 1 Medical face masks 20.00 2012-11-23 1039 11.040.30 13.340.30

SANS 1866-2 2015-07-31 1 Medical Respirators 20.00 2014-08-15 1039

SANS 1869 SABS 1869 2009-12-24 2 Chrome-tanned bend outer sole leather 20.00 2007-03-09 120-02 59.140.35 61.060

SANS 1873 SABS 1873 2009-12-24 2 Vegetable-tanned bend outer sole leather 20.00 2007-03-09 120-02 59.140.35 61.060

A- 13 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 1874 SABS 1874 2014-10-30 3 Switchgear - Metal-enclosed ring main units NRS 006:2013 IDT 50.20 2014-08-11 067-01 29.130.10 for rated a.c. voltages above 1 kV and up to and including 36 kV

SANS 1876 2001-03-31 1 Feature instance identification standard 30.70 2002-12-03 211 07.040 35.240.70

SANS 1883-2 2008-12-31 1 Geographic Information - Addresses Part 2: 20.00 2007-08-17 211 07.040 Guidelines for addresses in databases, data 35.240.70 transfer, exchange and interoperability

SANS 1915 2008-12-24 2 Woven backfill bags and paddock curtains 20.00 2007-07-13 082-04 55.080 73.020

SANS 1932 2015-02-28 1 Standard test method for solar ASTM E 903:2012 IDT 20.00 2014-10-03 081-09 absortance,reflectance and transmittance of materials using intergrating spheres

SANS 1980 2015-02-28 1 Standard practise for calculating solar ASTM E 1980:2011 IDT 20.00 2014-10-03 081-09 reflectance index of horizontal and low-sloped opaque surfaces.

SANS 1981 2015-02-28 1 Standard test method for solar reflectance of ASTM E 1918:2006 IDT 20.00 2014-10-03 081-09 horizontal and low sloped surface in the field.

SANS 1982 2015-01-31 1 Standard test method for determination of ASTM C1549:2009 IDT 20.00 2014-10-03 081-09 solar reflectance near ambient temparature

SANS 2001-BE2 2002-08-31 1 Standardized specification for construction 50.20 2003-01-16 1098 93.020 works BE2: Earthworks (small works)

SANS 2001-BE6 2002-08-31 1 Standardized specification for construction 50.20 2003-01-16 1098 93.020 works BE6: Small earth dams

SANS 2001-BE7 2002-08-31 1 Standardized specification for construction 50.20 2003-01-16 1098 93.020 works BE7: Gabions and pitching

SANS 2001-BE8 2003-02-28 1 Standardized specification for construction 50.20 2003-01-16 1098 93.020 works BE8: Earthworks (roads, subgrade)

SANS 2001-EC1 2010-12-24 1 Construction works EC1: Ceilings and 20.00 2009-10-23 1098 91.060.01 partitions 91.060.30

SANS 2001-EF1 2010-12-24 1 Construction works EF1: Floor coverings and 20.00 2009-10-23 1098 91.060.01 wall linings 91.060.30

SANS 2001-EM2 2010-12-24 1 Construction works EM2: Surface finishes - 20.00 2009-10-23 1098 91.060.30 Concrete floors

A- 14 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 2001-ET1 2010-12-24 1 Construction works ET1: Tiling 20.00 2009-10-23 1098 91.060.01

SANS 2101 1 Security management 20.00 2009-03-27 179

SANS 2106 SABS ISO 2106 2014-10-30 2 Anodizing of aluminium and its alloys - ISO 2106:2011 IDT 20.00 2014-08-08 107 25.220.20 Determination of mass per unit area (surface density) of anodic oxide coatings - Gravimetric method

SANS 2143 SABS ISO 2143 2014-10-31 2 Anodizing of aluminium and its alloys - ISO 2143:2010 IDT 20.00 2014-08-08 107 25.220.20 Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye spot test with prior acid treatment

SANS 2879 2015-12-31 1 Live and Raw Bivalve Molluscs 20.00 2014-10-03 234

SANS 2972 2013-12-31 1 Lifting tackle - Inspections 30.20 2013-10-24 1020

SANS 3000-1 2015-02-28 3 Railway safety management Part 1: General 30.20 2014-08-27 1066 45.020 93.100

SANS 3000-2-1 2015-01-31 2 Railway safety management Part 2-1: 30.20 2014-09-02 1066 45.020 Technical requirements for engineering and 93.100 operational standards - Electrical infrastructure

SANS 3000-2-2 2015-01-31 2 Railway safety management Part 2-2: 35.20 2014-09-15 1066 45.020 Technical requirements for engineering and 93.100 operational standards - Track and civil infrastructure

SANS 3000-2-3 2015-01-31 2 Railway safety management Part 2-3: 30.20 2014-08-27 1066 45.020 Technical requirements for engineering and 93.100 operational standards - Rolling stock

SANS 3001-AG11 2014-02-28 1 Civil engineering test methods Part AG11: 30.60 2013-07-22 081-04 91.100.15 Polished-stone value of aggregates 93.010 93.080.20

SANS 3001-AG12 2014-03-31 1 Civil engineering test methods Part AG12: 50.60 2014-02-11 081-04 Soundness of aggregates (magnesium sulphate method)

SANS 3001-AS21 2014-02-28 1 Civil engineering test methods Part AS21: 50.60 2014-09-30 081-04 93.080.10 Determination of the bitumen content of an 93.080.20 asphalt mix by ignition

A- 15 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 3001-AS4 2015-02-06 1 Civil engineering test methods Part AS4: 20.00 2014-10-03 081-08 Determination of the indirect tensile strength of asphalt

SANS 3001-PD1 2015-02-06 1 Civil engineering test methods Part PD1: 20.00 2014-10-03 081-08 Determination of permanent deformation and moisture sensitivity in asphalt mixes using a one-third-scale mobile load simulator (MMLS3)

SANS 3001- 2015-02-06 1 Civil engineering test methods Part BSM1: 20.00 2014-10-03 081-08 BSM1 Determination of the foaming characteristics of bitumen

SANS 3001-CO1 2012-05-31 1 Civil engineering test methods Part CO1: 20.00 2011-01-21 081-01 Freshly mixed concrete - Mixing in the laboratory, sampling, casting and curing of test specimens

SANS 3001-CO2 2012-05-31 1 Civil engineering test methods Part CO2: 20.00 2011-01-21 081-01 Consistency of freshly mixed concrete - Determination of the slump

SANS 3001-CO3- 2007-08-31 1 Concrete durability index testing Part CO3-1: 30.20 2013-03-04 081-01 91.100.30 1 Preparation of test specimen

SANS 3001-CO3- 2007-08-31 1 Concrete durability index testing Part CO3-2: 30.20 2013-03-04 081-01 91.100.30 2 Oxygen permeability test

SANS 3001-CO3- 2007-08-31 1 Concrete durability index testing Part CO3-3: 30.20 2013-03-04 081-01 91.100.30 3 Chloride conductivity test

SANS 3001-CO10 2012-05-31 1 Civil engineering test methods Part CO10: The 20.00 2011-01-21 081-01 dimensions, tolerances and uses of cast concrete test specimens

SANS 3001-CO11 2012-05-31 1 Civil engineering test methods Part CO11: 20.00 2011-01-21 081-01 Compressive strength of hardened concrete

SANS 3001-GR35 2013-10-31 1 Civil engineering test methods Part GR35: 50.20 2014-10-16 081-04 13.080.01 Determination of in-place dry density (sand 13.080.05 replacement) 93.080.20

SANS 3001-GR41 2013-10-31 1 Civil engineering test methods Part GR41: 50.60 2014-10-07 081-04 93.020 Determination of the California Bearing Ratio 93.080.20 of lime treated materials

A- 16 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 3001-GR56 2014-12-31 1 Civil engineering test methods Part GR56: 50.60 2014-10-07 081-04 Determination of the wet-dry durability of compacted and cured specimens of cementitiously stabilized materials by mechanical brushing

SANS 3001-GR58 2014-02-28 1 Civil engineering test methods Part GR58: 50.60 2014-08-12 081-04 93.020 Determination of the cement or lime content of 93.080.20 stabilized materials by means of the back- titration (acid base) method

SANS 3691-1 2014-07-31 1 Industrial trucks - Safety requirements and ISO 3691-1:2011 IDT 50.20 2014-10-14 110 53.060 verification Part 1: Self-propelled industrial trucks, other than driveless trucks, variable- reach trucks and burden-carrier trucks

SANS 3691-5 2014-07-31 1 Industrial trucks - Safety requirements and ISO 3691-5:2009 IDT 20.00 2014-05-09 110 53.060 verification Part 5: Pedestrian-propelled trucks

SATS 3691-8 2014-07-31 1 Industrial trucks - Safety requirements and ISO/TS 3691-8:2012 IDT 20.00 2014-05-09 110 53.060 verification Part 8: Regional requirements for countries outside the European community

SANS 4437-1 2015-02-28 1 Plastics piping systems for the supply of ISO 4437-1:2014 IDT 50.20 2014-09-23 138-03 23.040.20 gaseous fuels - Polyethylene (PE) Part 1: 75.200 General 83.140.30

SANS 4437-2 2015-02-28 1 Plastics piping systems for the supply of ISO 4437-2:2014 IDT 50.20 2014-09-23 138-03 75.200 gaseous fuels - Polyethylene (PE) Part 2: 83.140.30 Pipes

SANS 4437-3 2015-02-28 1 Plastics piping systems for the supply of ISO 4437-3:2014 IDT 50.20 2014-09-23 138-03 75.200 gaseous fuels - Polyethylene (PE) Part 3: 83.140.30 Fittings

SANS 4437-5 2015-02-28 1 Plastics piping systems for the supply of ISO 4437-5:2014 IDT 50.20 2014-09-23 138-03 75.200 gaseous fuels - Polyethylene (PE) Part 5: 83.140.30 Fitness for purpose of the system

SANS 4918 SABS ISO/TR 4918 2015-01-31 2 Resilient, textile and laminate floor coverings - ISO 4918:2009 IDT 20.00 2014-10-10 219 59.080.60 Castor chair test

SANS 4998 SABS ISO 4998 2014-10-30 3 Continuous hot-dip zinc-coated carbon steel ISO 4998:2014 IDT 50.60 2014-10-05 107 25.220.40 sheet of structural quality 77.140.50

SANS 5616 SABS SM 616 2009-12-24 4 Preparation of samples (leather, elastomeric 20.00 2007-03-02 120-01 61.060 material and other footwear materials)

A- 17 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 5618 SABS SM 618 2009-12-24 4 Leather - Matter extractable by petroleum 20.00 2007-03-02 120-01 59.140.30 ether

SANS 5619 SABS SM 619 2009-12-24 4 Determination of water-soluble matter content 20.00 2007-03-02 120-01 59.140.30 in leather

SANS 5622 SABS SM 622 2009-12-24 3 Determination of total sulphated ash content of 20.00 2007-03-02 120-01 59.140.30 leather

SANS 5623 SABS SM 623 2009-12-24 3 Determination of ash content of water- 20.00 2007-03-02 120-01 59.140.30 insolubles in leather

SANS 5624 SABS SM 624 2009-12-24 3 Determination of hide substance of leather 20.00 2007-03-02 120-01 59.140.30

SANS 5627 SABS SM 627 2009-12-24 3 Determination of magnesium sulphate content 20.00 2007-03-02 120-01 59.140.30 of leather by complexometric titration

SANS 5632 SABS SM 632 2009-12-24 2 Determination of dynamic waterproofness of 20.00 2007-03-02 120-01 59.140.30 sole leather

SANS 5633 SABS SM 633 2009-12-24 2 Determination of wet stitch tear strength 20.00 2007-03-02 120-01 59.140.30 (leather, leatherboard, fibreboard)

SANS 5636 SABS SM 636 2009-12-24 3 Determination of (a) tensile strength, (b) 20.00 2007-03-02 120-01 59.140.30 percentage elongation caused by a specified force, (c) percentage elongation at break of leather

SANS 5638 SABS SM 638 2009-12-24 2 Determination of dynamic waterproofness of 20.00 2007-03-02 120-01 59.140.30 upper leather

SANS 5640 SABS SM 640 2009-12-24 2 Determination of flex resistance (leather 20.00 2007-03-02 120-01 61.060 fibreboard and cellulose fibreboard inner soles)

SANS 5641 SABS SM 641 2009-12-24 3 Determination of wet and dry bursting 20.00 2007-03-02 216 61.060 strengths of stiffeners

SANS 5642 SABS SM 642 2009-12-24 3 Determination of water absorption of inner 20.00 2007-03-02 216 61.060 soles and inner-sole material

SANS 5645 SABS SM 645 2009-12-24 4 Safety footwear - Impact resistance 20.00 2007-03-02 216 13.340.50

SANS 5646 SABS SM 646 2009-12-24 3 Determination of bond strength of rib 20.00 2007-03-02 216 61.060 attachment (stuck-on rib inner soles)

SANS 5648 SABS SM 648 2009-12-24 3 Identification of organic retanned matter in 20.00 2007-03-02 120-02 59.140.30 chrome retanned leather

A- 18 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 5650 SABS SM 650 2009-12-24 3 Determination of hardness of elastomeric 20.00 2007-03-09 216 61.060 material

SANS 5664 SABS SM 664 2009-12-24 3 Footwear materials - Abrasion resistance of 20.00 2007-03-09 216 61.060 elastomeric material

SANS 5666 SABS SM 666 2009-12-24 3 Footwear - Soling material - Cut growth 20.00 2007-03-09 216 61.060 resistance

SANS 5668 SABS SM 668 2009-12-24 2 Measurement of set in lasting of leather with 20.00 2007-03-09 120-01 61.060 the dome plasticity apparatus

SANS 5669 SABS SM 669 2009-12-24 2 Measurement of distension and strength of 20.00 2007-03-09 120-01 59.140.30 grain of leather by the ball burst test

SANS 5850-1 SABS SM 850-1 2008-12-24 3 Sulfates content of fines in aggregates Part 1: 20.00 2007-08-03 081-04 91.100.15 Water-soluble sulfates in fines in aggregates

SANS 5854 SABS SM 854 3 pH Value of fines in aggregates for base- 20.00 2012-12-07 081-04 91.100.15 courses

SANS 5884 SABS SM 884 2009-12-24 2 Scuff damage by impact on leather 20.00 2007-03-09 120-01 59.140.30

SANS 5885 SABS SM 885 2009-12-24 2 Assessment of scuff damage to leather 20.00 2007-03-09 120B 59.140.30 (viewing box method)

SANS 5962 SABS SM 962 2009-12-23 2 Determination of wet split tear strength of 20.00 2007-03-09 216 19.060 inner sole and runner materials (other than 61.060 leather)

SANS 6075 SABS SM 1075 2009-12-24 2 Total ash content (PVC upper, outer sole and 20.00 2007-03-09 216 61.060 heel materials)

SANS 6076 SABS SM 1076 2009-12-24 2 Ether-soluble matter content (PVC upper, 20.00 2007-03-09 216 61.060 outer sole and heel materials) 71.040.40

SANS 6240 SABS SM 1240 2013-06-28 2 Electric conductivity of fine aggregate 20.00 2012-12-07 081-04 91.100.15

SANS 7131 2015-04-24 1 Hot-applied thermoplastic road marking 20.00 2013-06-14 1093 materials Part 1: Materials, mixtures and manufacturing

SANS 7165 2008-12-24 1 Fire fighting - Portable fire extinguishers - ISO 7165:2009 +AM 1:2004 MOD 30.20 2014-02-05 021-04 13.220.10 Performance and construction +AM 2:2004

SANS 7404-2 SABS ISO 7404-2 2015-03-31 2 Methods for the petrographic analysis of ISO 7404-2:2013 IDT 20.00 2014-10-10 027-05 73.040 bituminous coal and anthracite Part 2: Method 75.160.10 of preparing coal samples

A- 19 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 8253-3 SABS ISO 8253-3 2013-03-29 2 Acoustics - Audiometric test methods Part 3: ISO 8253-3:2012 IDT 50.60 2013-03-12 076 13.140 Speech audiometry

SANS 10005 SABS 05 2015-02-27 8 The preservative treatment of timber 30.20 2014-09-25 218 71.100.50 79.020

SANS 10019 SABS 019 2014-02-28 8 Transportable pressure receptacles for 20.00 2013-06-07 058 23.020.30 compressed, dissolved and liquefied gases - Basic design, manufacture, use and maintenance

SANS 10021 SABS 021 2015-03-31 4 The waterproofing of buildings (including 20.00 2013-03-15 081-06 91.120.30 damp-proofing and vapour barrier installation)

SANS 10043 SABS 043 2012-06-30 5 The installation of wood and laminate flooring 30.20 2014-01-22 098-04 79.040 91.060.30

SANS 10047 SABS 047 2013-01-31 7 The testing of motor vehicles for 20.00 2011-01-21 1033 43.020 roadworthiness

SANS 10049 SABS 049 2015-03-31 5 Food safety management - Requirements for 20.00 2013-05-10 034-17 67.020 prerequisite programmes (PRPs)

SANS 10082 SABS 082 2015-06-30 5 Timber buildings 20.00 2012-07-20 098-04 91.040.01 91.080.20

SANS 10085-1 2012-11-30 2 The design, erection, use and inspection of 20.00 2012-02-10 214 91.220 access scaffolding Part 1: Steel access scaffolding

SANS 10087-3 SABS 087-3 2014-03-31 5 The handling, storage, distribution and 50.60 2014-09-23 1019 13.300 maintenance of liquefied petroleum gas in 75.200 domestic, commercial, and industrial installations Part 3: Liquefied petroleum gas installations involving storage vessels of individual water capacity exceeding 500 L

SANS 10087-6 SABS 087-6 2014-10-30 5 The handling, storage, distribution and 20.00 2013-09-20 1019 75.160.30 maintenance of liquefied petroleum gas in 75.200 domestic, commercial, and industrial installations Part 6: The application of liquefied petroleum gases as engine fuels for internal combustion engines

SANS 10090 SABS 090 2012-03-31 4 Community protection against fire 20.00 2010-04-30 021 13.220.01

SANS 10094 SABS 094 2015-10-30 5 The use of high-strength friction-grip bolts 20.00 2014-05-09 098-03 21.060.10

A- 20 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 10100-1 SABS 0100-1 2005-01-31 3 The structural use of concrete Part 1: Design 50.20 2005-09-06 098-02 91.080.40

SANS 10100-3 2015-06-30 1 The structural use of concrete Part 3: Water 30.20 2014-05-06 098-02 retaining structures

SANS 10106 SABS 0106 2009-03-31 4 The installation, maintenance, repair and 50.60 2014-09-09 1057 27.160 replacement of domestic solar water heating 97.100.99 systems

SANS 10134 SABS 0134 2014-04-30 3 The safeness of private swimming pools 30.20 2014-04-24 059-05 97.220.10

SANS 10137 SABS 0137 2016-05-31 5 The installation of glazing in buildings 20.00 2014-05-30 081-03 81.040.20 91.060.01

SANS 10143 SABS 0143 2010-06-30 2 Building drawing practice 20.00 2009-06-12 059 01.100.30

SANS 10145 SABS 0145 2014-12-30 2 Concrete masonry construction 20.00 2014-05-09 098-05 91.080.30 91.100.30

SANS 10160-3 2015-05-31 2 Basis of structural design and actions for 20.00 2013-05-24 098-01 91.010.30 buildings and industrial structures Part 3: Wind 91.080.01 actions

SANS 10160-4 2013-04-30 2 Basis of structural design and actions for 50.60 2014-07-15 098-01 91.010.30 buildings and industrial structures Part 4: 91.080.01 Seismic actions and general requirements for buildings

SANS 10162-1 SABS 0162-1 2015-06-30 3 The structural use of steel Part 1: Limit-states 20.00 2014-01-17 098-03 77.140.01 design of hot-rolled steelwork 91.080.10

SANS 10163-1 SABS 0163-1 2008-12-24 3 The structural use of timber Part 1: Limit- 30.20 2013-07-02 098-04 79.040 states design 91.080.20

SANS 10163-2 SABS 0163-2 2008-12-24 2 The structural use of timber Part 2: Allowable 30.20 2013-09-06 098-04 79.040 stress design 91.080.20

SANS 10164-1 SABS 0164-1 2008-02-28 2 The structural use of masonry Part 1: 30.20 2010-07-22 098-05 91.060.10 Unreinforced masonry walling 91.080.30

SANS 10166 SABS 0166 2012-04-30 2 The overhaul of diesel fuel injection equipment 20.00 2010-04-16 022-05 43.060.40

SANS 10198-13 SABS 0198-13 2004-06-30 2 The selection, handling and installation of 35.20 2014-07-03 066 29.240.20 electric power cables of rating not exceeding 33 kV Part 13: On-site testing, commissioning, maintenance, diagnostics and fault location

A- 21 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 10200 SABS 0200 2010-12-24 2 Neutral earthing in medium voltage industrial 50.70 2014-08-29 067-05 29.120.50 power systems

SANS 10209 SABS 0209 2011-03-31 2 The design and construction of private 20.00 2010-01-22 059 97.220.10 swimming pools

SANS 10212 SABS 0212 2012-03-31 3 Roadside roadworthiness assessment of 30.20 2010-05-19 1033 43.020 motor vehicles 53.060

SANS 10216 SABS 0216 2013-01-31 6 Evaluation of vehicle test stations 50.20 2014-09-09 1033 03.120.20 43.180

SANS 10222-3 SABS 0222-3 2014-02-28 5 Electrical security installations Part 3: Electric 50.60 2014-10-05 068 13.310 fences (non-lethal)and manufacture 91.090 requirements

SANS 10229-1 2014-02-28 3 Transport of dangerous goods - Packaging 20.00 2013-01-25 1060-03 03.220 and large packaging for road and rail transport 13.300 Part 1: Packaging 55.020

SATR 10229-1 2011-04-30 1 Variations between SANS 10229-1, Ed 2 and 20.00 2011-02-11 1060-03 future Ed 3 (aligned with UN Model Regulations 16th edition)

SANS 10231 SABS 0231 2013-11-01 4 Transport of dangerous goods by road - 50.60 2014-09-21 1060-02 13.300 Operational requirements 43.020

SANS 10232-1 SABS 0232-1 2013-12-20 4 Transport of dangerous goods - Emergency 20.00 2013-01-25 1060-02 13.300 information systems Part 1: Emergency information system for road transport

SANS 10234 2012-12-24 2 Globally Harmonized System of classification 20.00 2011-07-04 1060-02 13.300 and labelling of chemicals (GHS)

SANS 10237 SABS 0237 2009-10-31 2 Metal roof and side cladding 20.00 2009-02-20 081-02 91.060.10 91.060.20

SANS 10239 SABS 0239 2012-10-31 2 Hygienic practices on commercial fishing 35.20 2014-10-10 234 13.100 vessels 47.040 65.150

SANS 10240 SABS 0240 2012-03-31 3 The installation of replacement auto glass in 50.20 2014-09-16 022-05 43.040.65 motor vehicles

SANS 10241 SABS 0241 2012-08-31 2 Tachograph centres and mobile workshops 30.20 2011-01-13 022 35.160 43.180

A- 22 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 10243 SABS 0243 2014-08-29 4 The manufacture and erection of timber 50.60 2014-03-18 098-04 91.060.20 trusses 91.080.20

SANS 10253 SABS 0253 2012-12-24 2 Brake service workshops 20.00 2011-03-25 022-05 43.180

SANS 10255 SABS 0255 2014-09-30 3 Health, safety and environmental guidelines 20.00 2014-03-20 218 13.100 for the construction and operation of timber 79.020 treatment plants

SANS 10264-4 2014-06-30 1 Disaster management Part 4: All-hazard 20.00 2014-02-14 223 disaster risk reduction strategy development

SANS 10280-2 2007-06-30 1 Overhead power lines for conditions prevailing NRS 041-2:2007 IDT 20.00 2007-03-30 067-05 29.240.20 in South Africa Part 2: General design considerations

SANS 10286 SABS 0286 2009-11-30 2 Mine residue 30.20 2013-08-28 207 73.020

SANS 10287 SABS 0287 2010-11-30 2 Automatic sprinkler installations for fire-fighting 30.20 2014-02-05 021-01 13.220.10 purposes 91.140.60

SANS 10293 SABS 0293 2008-12-05 2 Condition assessment of steel wire ropes on 20.00 2007-02-23 082-02 53.020.30 mine winders 73.100.40

SANS 10294 SABS 0294 2009-03-27 2 The performance, operation, testing and 20.00 2007-02-23 082-02 73.100.40 maintenance of drum winders relating to rope safety

SANS 10304-1 SABS 0304-1 2015-03-31 2 The classification of pesticides and stock 20.00 2013-10-11 1060-02 65.100.01 remedies for sale and handling in South Africa Part 1: The classification of pesticides

SANS 10320 2012-11-30 2 South African guide to the systematic 20.00 2011-04-20 027 73.040 evaluation of coal resources and coal reserves

SANS 10330 SABS 0330 2015-03-31 3 Requirements for a Hazard Analysis and 20.00 2013-05-10 034-17 03.120.10 Critical Control Point (HACCP) system 67.020

SANS 10331 SABS 0331 2007-09-30 2 Translocation of certain species of wild 30.20 2006-12-04 1040-01 13.020.40 herbivore 65.020.99

SANS 10335 SABS 0335 2008-08-31 2 The installation, maintenance and safe use of 20.00 2007-05-18 082-01 03.220.30 overhead monorail transport systems for 93.100 underground use

SANS 10343 SABS 0343 2012-06-30 2 Verification of non-automatic electronic self- 30.20 2013-10-24 078 17.060 indicating road vehicle mass measuring 43.020 equipment for use by road traffic authorities

A- 23 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 10361 SABS ISO 10361 2015-01-31 2 Textile floor coverings-Production of changes ISO 10361:2012 IDT 20.00 2014-10-10 219 59.080.60 in appearance by means of Vettermann drum and hexapod tumbler tester

SANS 10371 2013-04-30 2 Terms and definitions for clothing 20.00 2011-04-20 1195 01.040.59

SANS 10375 2012-06-30 2 The inspection, testing and examination of 20.00 2010-05-28 096 53.020.20 overhead cranes

SANS 10377 2014-12-31 1 Consumer product safety - Practical guidance ISO 10377:2013 IDT 50.60 2014-03-27 007 for suppliers

SANS 10386 2014-12-31 2 The care and use of animals for scientific 20.00 2014-02-21 1040-04 07.080 purposes 11.040.01 11.100

SANS 10388 2012-03-31 2 The inspection, examination and testing of lift 35.20 2014-08-21 110 43.100 trucks 53.020.20

SANS 10400-A 3.01 The application of the National Building 50.60 2014-10-07 060 91.040.01 Regulations Part A: General principles and requirements

SANS 10400-F 3.01 The application of the National Building 50.20 2014-08-28 060 91.040.01 Regulations Part F: Site operations

SANS 10400-H 3.01 The application of the National Building 50.60 2014-10-28 060 91.040.01 Regulations Part H: Foundations

SANS 10400-W 3.01 The application of the National Building 50.20 2014-09-09 060 91.040.01 Regulations Part W: Fire installation

SANS 10407 2014-09-30 2 Thatched roof construction 50.60 2013-04-09 098-04 91.060.20

SANS 10408 2013-11-30 2 Repairs to tyres for motor vehicles, tubes and 30.20 2014-08-18 031 83.160.10 valves

SANS 11601 2010-06-30 2 Fire fighting - Wheeled fire extinguishers - ISO 11601:2008 MOD 20.00 2009-09-04 021-04 13.220.10 Performance and construction

SANS 12402-5 2006-11-30 1 Personal flotation devices Part 5: Buoyancy ISO 12402-5:2006 +AM 1:2010 IDT 50.60 2014-08-31 1188 13.340.70 aids (level 50) - Safety requirements +Cor 1:2006

SANS 12620 2014-10-31 2 Terminology and other language and content ISO 12620:2009 IDT 50.20 2014-09-16 037 01.120 resources - Specification of data categories 35.240.30 and management of a Data Category Registry for language resources

A- 24 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 12958 2015-02-28 1 Geotextiles and geotextile-related products - ISO 12958:2010 IDT 50.20 2014-10-16 081-05 59.080.70 Determination of water flow capacity in their plane

SANS 13162 2015-01-31 1 Thermal insulation products for buildings - EN 13162:2012 IDT 20.00 2014-10-03 081-09 Factory made mineral wool (MW) products - Specifications

SANS 13167 2015-01-31 1 Thermal insulation products for buildings - EN 13167:2012 IDT 20.00 2014-10-03 081-09 Factory made cellular glass ( CG) products - Specification

SANS 13169 2015-01-31 1 Thermal insulation products for buildings- EN 13169:2012 IDT 20.00 2014-10-03 081-09 Factory made expanded perlite board (EPB) products-Specification

SANS 13170 2015-01-31 1 Thermal insulation products of expanded cork EN 13170:2012 IDT 20.00 2014-10-03 081-09 (ICB) - Specification

SANS 13171 2015-01-31 1 Thermal insulation products for buildings - EN 13171:2012 IDT 20.00 2014-10-03 081-09 Factory made wood fibre(WF) products - Specification

SANS 14031 SABS ISO 14031 2014-07-31 2 Environmental management - Environmental ISO 14031:2013 IDT 50.60 2014-05-07 207 13.020.10 performance evaluation - Guidelines

SANS 14049 2014-07-31 2 Environmental management - Life cycle ISO/TR 14049:2012 IDT 20.00 2013-11-15 207 13.020.30 assessment - Illustrative examples on how to 13.020.60 apply ISO 14044 to goal and scope definition and inventory analysis

SANS 14065 2014-07-31 2 Greenhouse gases - Requirements for ISO 14065:2013 IDT 50.60 2014-05-07 207 13.020.40 greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition

SATR 14069 2014-07-31 1 Greenhouse gases - Quantification and ISO/TR 14069:2013 IDT 20.00 2014-03-28 207 13.020.40 reporting of greenhouse gas emissions for organizations - Guidance for the application of ISO 14064-1

SANS 14452 2013-09-30 1 Network services billing - Requirements ISO 14452:2012 IDT 50.60 2014-03-27 007

SANS 15426-1 2015-04-30 2 Information technology - Automatic ISO/IEC 15426-1:2006 IDT 50.20 2014-10-10 001-31 35.040 identification and data capture techniques - Bar code verifier conformance specification testing Part 1: Linear symbols

A- 25 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 16175-1 2014-12-31 1 Information and documentation - Principles ISO 16175-1:2010 IDT 50.20 2014-10-10 171 and functional requirements for records in electronic office environments - Part 1 Overview and statement of principles

SANS 16175-2 2014-12-31 1 Information and documentation - Principles ISO 16175-2:2011 IDT 50.20 2014-10-10 171 and functional requirements for records in electronic office environments - Part 2: Guidelines and functional requirements for digital records management systems

SANS 16175-3 2014-12-31 1 Information and documentation - Principles ISO 16175-3:2010 IDT 50.20 2014-10-10 171 and functional requirements for records in electronic office environments - Part 3: Guidelines and functional requirements for records in business systems

SANS 17068 2014-12-31 1 Information and documentation - Trusted third ISO/TR 17068:2012 IDT 50.20 2014-09-30 046 party repository for digital records

SATS 17576 2014-05-31 1 Light-emitting diode products for interior 30.20 2014-07-15 064-01 lighting, streetlighting and floodlighting - Performance requirements

SANS 18013-4 2014-12-31 1 Information technology - Personal ISO/IEC 18013-4:2011 IDT 50.20 2014-10-07 001-17 35.240.15 identification - ISO-compliant driving licence - Part 4: Test methods

SATR 18047-3 2014-12-31 2 Information technology - Radio frequency ISO/IEC TR 18047-3:2009 IDT 20.00 2014-10-03 001-31 35.200 identification device conformance test methods Part 3: Test methods for air interface communications at 13,56 MHz

SANS 18091 2014-12-31 1 Quality management systems - Guidelines for ISO 18091:2014 IDT 50.20 2014-10-10 176 the application of ISO 9001:2008 in local government

SANS 18601 2014-10-31 1 Packaging and the environment - General ISO 18601:2013 IDT 20.00 2014-08-08 122 requirements for the use of ISO standards in the field of packaging and the environment

SANS 18602 2014-10-31 1 Packaging and the environment - Optimization ISO 18602:2013 IDT 50.60 2014-10-05 122 of the packaging system

SANS 18603 2014-12-31 1 Packaging and the environment - Reuse ISO 18603:2013 IDT 50.60 2014-10-05 122

SANS 18604 2014-10-31 1 Packaging and the environment - Material ISO 18604:2013 IDT 50.20 2014-10-05 122 recycling

A- 26 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 18605 2014-10-31 1 Packaging and the environment - Energy ISO 18605:2013 IDT 20.00 2014-08-08 122 recovery

SANS 18606 2014-10-31 1 Packaging and the environment - Organic ISO 18606:2013 IDT 50.20 2014-09-16 122 recycling

SANS 19144-2 2014-12-31 1 Geographic information- Classification ISO 19144-2:2012 IDT 50.20 2014-09-23 211 systems - Part 2 Land cover Meta Language(LCML)

SANS 22003 2014-11-30 2 Food safety management systems - ISO/TS 22003:2013 IDT 50.20 2014-10-03 034-17 03.120.20 Requirements for bodies providing and 67.020 certification of food safety management systems

SANS 22313 2014-06-30 1 Societal security - Business continuity ISO 22313:2011 IDT 50.60 2014-10-01 223 management systems

SANS 22321 2011-09-30 1 Societal security - Essential data requirements ISO 22321:1111 IDT 20.00 2009-09-04 223 03.100.01 for command and control, coordination and cooperation

SANS 22322 2011-09-30 1 Societal security - Inter/Intra organisational ISO 22322:1111 IDT 20.00 2009-09-04 223 03.100.01 warning procedure

SANS 22398 2014-06-30 1 Societal security - Guidelines for exercises ISO 22398:2013 IDT 50.60 2014-10-01 223 and testing

SANS 22846-2 2014-07-31 1 Personal equipment for protection against fall - ISO 22846-2:2012 IDT 20.00 2014-05-09 094-04 13.340.60 Rope access systems Part 2: Code of practice

SANS 22915-4 2014-10-31 1 Industrial trucks - Verification of stability Part ISO 22915-4:2009 IDT 20.00 2014-08-08 110 4: Pallet stackers, double stackers and order picking trucks with operator position elevating up to and including 1200 mm lift height

SANS 22915-7 2014-10-31 1 Industrial trucks - Verification of stability Part ISO 22915-7:2009 IDT 20.00 2014-08-08 110 7: Bidirectional and multidirectional trucks

SANS 22915-8 2014-10-31 1 Industrial trucks - Verification of stability Part ISO 22915-8:2008 IDT 20.00 2014-08-08 110 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated

SANS 22915-10 2014-07-31 1 Industrial trucks - Verification of stability Part ISO 22915-10:2008 IDT 50.60 2014-08-30 110 53.060 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices

A- 27 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 22915-11 2014-07-31 1 Industrial trucks - Verification of stability Part ISO 22915-11:2008 IDT 50.60 2014-08-30 110 53.060 11: Industrial variable-reach trucks

SANS 22915-20 2014-07-31 1 Industrial trucks - Verification of stability Part ISO 22915-20:2008 IDT 20.00 2014-03-20 110 53.060 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization

SATR 23081-3 2014-12-31 1 Information and documentation-Managing ISO/TR 23081-3:2011 IDT 20.00 2014-10-03 171 metadata for records - Part 3: Self- assessment method

SANS 23185 2014-11-28 1 Assessment and benchmarking of ISO 23185:2009 IDT 50.20 2014-09-19 037 01.020 terminological resources - General concepts, principles and requirements.

SANS 24610-2 2014-11-27 1 Language resource management -Feature ISO 24610-2:2011 IDT 50.20 2014-09-19 037 01.140.20 structures - Part 2 Feature system declaration

SANS 24615-1 2014-11-28 1 Language resource management - Syntactic ISO 24615-1:2014 IDT 50.20 2014-09-19 037 01.020 annotation framework (SynAF) - Part 1 Syntactic model

SANS 26162 2014-11-28 1 Systems to manage terminology knowledge ISO 26162:2012 IDT 50.20 2014-09-19 037 01.020 and content - Design implementation and 35.240 maintenance of terminology management systems

SANS 27001 2015-01-31 2 Information technology - Security techniques - ISO/IEC 27001:2013 IDT 50.20 2014-10-10 001-27 35.040 Information security management systems - Requirements

SATR 27015 2015-01-30 1 Information technology - Security techniques - ISO/IEC TR 27015:2012 IDT 50.20 2014-10-10 001-27 03.060 Information security management guidelines 35.040 for financial services

SANS 29192-4 2014-12-31 1 Information technology - Security techniques - ISO/IEC 29192-4:2013 IDT 50.20 2014-10-07 001-27 35.040 Lightweight cryptography - Part 4: Mechanisms using asymmetric techniques

SANS 29383 2014-11-28 1 Terminology policies - Development and ISO 29383:2010 IDT 50.60 2014-10-01 037 01.020 implementation

SANS 29541 2014-12-31 1 Solid mineral fuels - Determination of total ISO 29541:2010 IDT 50.60 2014-10-10 027-05 73.040 carbon, hydrogen and nitrogen content - 75.160.10 Instrumental method" (Kindly insert the commas and delete the "s" after method).

SATR 29944 2014-07-31 1 Powered industrial trucks - Brake perfomance ISO/TR 29944:2010 IDT 20.00 2014-03-28 110 53.060 - Determination of measurement procedures

A- 28 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 30004 2013-12-31 1 Ships and marine technology - Ship recycling ISO 30004:2012 IDT 50.60 2013-07-03 207 47.020.01 management systems - Guidelines for the implementation of ISO 30000

SANS 30005 2013-12-31 1 Ships and marine technology - Ship recycling ISO 30005:2012 IDT 50.60 2013-07-03 207 47.020.01 management systems - Information control for hazardous materials in the manufacturing chain of shipbuilding and ship operations

SANS 50003 2015-12-24 1 Energy management system and ISO 50003:1111 IDT 20.00 2013-05-10 242 auditor competency

SANS 50004 2015-12-24 1 Guidance for the implementation, ISO 50004:1111 IDT 20.00 2013-05-10 242 maintenance and improvement of an EnMS

SANS 50006 2015-12-24 1 Energy Baseline and Energy Performance ISO 50006:1111 IDT 20.00 2013-05-10 242 Indicators (EnPIs) - General principles and guidance

SANS 50010-2 2015-01-31 1 Guide to do measurement and verification on 20.00 2013-05-10 242 Greenfields projects

SANS 50015 2015-12-24 1 Monitoring, measurement, analysis and ISO 50015:1111 IDT 20.00 2013-05-10 242 verification of organizational energy performance

SANS 50081-41 2015-02-27 1 Safety rules for the construction and EN 81-41:2010 IDT 20.00 2014-09-12 1082 installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility

SANS 50196-2 SABS EN 196-2 2014-09-30 3 Methods of testing cement Part 2: Chemical EN 196-2:2013 IDT 50.60 2014-09-03 081-01 91.100.10 analysis of cement

SANS 50312 2014-11-30 2 Particleboards - Specifications EN 312:2010 IDT 50.60 2014-09-23 1008 79.060.20

SANS 50483-6 2014-10-30 1 Test requirements for low voltage aerial EN 50483-6:2009 IDT 50.60 2014-08-01 066 29.240.20 bundled cable accessories - Part 6: Environmental testing

SANS 50529 2012-03-30 1 Respiratory protective devices - EN 529:1111 IDT 20.00 2011-01-28 094-15 Recommendations for selection, use, care and maintenance - Guidance document

SANS 52901 2008-06-30 1 Products used for treatment of water intended EN 12901:1999 IDT 50.60 2007-12-28 147 01.040.71 for human consumption - Inorganic supporting 13.060.20 and filtering materials - Definitions 71.100.80

A- 29 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 53763-9 2014-12-31 1 Explosives for civil uses - Detonators and EN 13763-9:2003 IDT 50.20 2014-09-30 1064 71.100.30 relays Part 9: Determination of resistance to bending of detonators

SANS 53763-22 2014-10-31 1 Explosives for civil uses - Detonators and EN 13763-22:2003 IDT 50.60 2014-10-02 1064 71.100.30 relays Part 22: Determination of capacitance, insulation resistance and insulation breakdown of leading wires

SANS 53763-23 2014-10-31 1 Explosives for civil uses - Detonators and EN 13763-23:2002 IDT 50.60 2014-10-02 1064 relays Part 23: Determination of shock-wave velocity of shock tube

SANS 53763-25 2014-10-31 1 Explosives for civil uses - Detonators and EN 13763-25:2004 IDT 50.60 2014-10-02 1064 71.100.30 relays Part 25: Determination of transfer capability of surface connectors, relays and coupling accessories

SANS 55000 2014-12-31 1 Asset management-Overview, principles and ISO 55000:2014 IDT 20.00 2014-10-03 251 terminology

SANS 55001 2014-12-31 1 Asset management - Management systems - ISO 55001:2014 IDT 20.00 2014-10-03 251 Requirements

SANS 55002 2014-12-31 1 Asset management-Management systems- ISO 55002:2014 IDT 20.00 2014-10-03 251 Guidelines for the application of ISO 55001

SANS 60034-2-1 2015-03-31 2 Rotating electrical machines Part 2-1: IEC 60034-2-1:2014 IDT 50.60 2014-10-03 061 29.160.01 Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)

SANS 60034-30-1 2015-02-28 1 Rotating electrical machines - Part 30-1: IEC 60034-30-1:2012 IDT 50.60 2014-10-03 061 29.160.30 Efficiency classes of line operated AC motors (IE code)

SANS 60079-1 SABS IEC 60079-1 2014-12-31 5 Explosive atmospheres Part 1: Equipment IEC 60079-1:2014 IDT 50.20 2014-09-25 065 29.260.20 protection by flameproof enclosures "d"

SANS 60079-2 SABS IEC 60079-2 2014-12-31 4 Explosive atmospheres Part 2: Equipment IEC 60079-2:2014 IDT 50.20 2014-09-25 065 29.260.20 protection by pressurized enclosure <

>

SANS 60079-29-3 2014-10-31 1 Explosive atmospheres - Part 29-3: Gas IEC 60079-29-3:2014 IDT 50.60 2014-08-29 065 detectors - Guidance on functional safety of fixed gas detection systems

SANS 60099-4 SABS IEC 60099-4 2014-12-31 3 Surge arresters Part 4: Metal-oxide surge IEC 60099-4:2014 IDT 50.60 2014-10-10 067-05 29.240.10 arresters without gaps for a.c. systems

A- 30 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 60099-9-20 2014-12-31 1 Surge arresters - Part 9: Metal-oxide surge IEC 60099-9-20:1111 IDT 20.00 2014-08-22 067-05 arresters without gaps for HVDC converter stations

SANS 60252-1 SABS IEC 60252-1 2.01 AC motor capacitors Part 1: General - IEC 60252-1:2010 IDT 50.70 2014-03-28 064-01 31.060.70 Performance, testing and rating - Safety requirements - Guidance for installation and operation

SANS 60252-2 2.01 AC motor capacitors Part 2: Motor start IEC 60252-2:2013 +AM 1:2013 IDT 50.60 2014-03-30 064-01 31.060.70 capacitors

SATR 60269-5 2014-08-31 2 Low-voltage fuses Part 5: Guidance for the IEC TR 60269-5:2014 IDT 30.20 2014-06-19 067-05 29.120.50 application of low-voltage fuses

SANS 60335-2-15 SABS IEC 60335-2-15 2015-03-31 4 Household and similar electrical appliances - IEC 60335-2-15:2012 +AM 1:2005 IDT 20.00 2014-09-05 072 97.040.50 Safety Part 2-15: Particular requirements for +Cor 1:2003 appliances for heating liquids

SANS 60335-2-16 SABS IEC 60335-2-16 3.02 Household and similar electrical appliances - IEC 60335-2-16:2012 +AM 1:2008 IDT 50.60 2014-09-22 072 97.040.50 Safety Part 2-16: Particular requirements for +AM 2:2013 food waste disposers

SANS 60335-2-21 SABS 60335-2-21 2007-04-30 2 Household and similar electrical appliances - IEC 60335-2-21:2003 MOD 20.00 2006-10-27 072 91.140.65 Safety Part 2-21: Particular requirements for storage water heaters

SANS 60335-2-32 SABS IEC 60335-2-32 3.02 Household and similar electrical appliances - IEC 60335-2-32:2013 +AM 1:2008 IDT 50.60 2014-09-22 072 97.170 Safety Part 2-32: Particular requirements for +AM 2:2013 massage appliances

SANS 60335-2-35 SABS IEC 60335-2-35 2015-04-30 4 Household and similar electrical appliances - IEC 60335-2-35:2012 IDT 20.00 2014-09-19 072 91.140.65 Safety Part 2-35: Particular requirements for instantaneous water heaters

SANS 60335-2-40 SABS IEC 60335-2-40 2015-04-30 4 Household and similar electrical appliances - IEC 60335-2-40:2013 IDT 20.00 2014-09-19 072 23.120 Safety Part 2-40: Particular requirements for 27.080 electrical heat pumps, air-conditioners and dehumidifiers

SANS 60335-2-41 SABS IEC 60335-2-41 2015-04-30 4 Household and similar electrical appliances - IEC 60335-2-41:2012 IDT 20.00 2014-09-12 072 23.080 Safety Part 2-41: Particular requirements for pumps

SANS 60335-2-44 SABS IEC 60335-2-44 3.02 Household and similar electrical appliances - IEC 60335-2-44:2012 +AM 1:2008 IDT 50.70 2014-10-03 072 97.060 Safety Part 2-44: Particular requirements for ironers

A- 31 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 60335-2-72 SABS IEC 60335-2-72 2015-04-30 3 Household and similar electrical appliances - IEC 60335-2-72:2012 IDT 20.00 2014-09-19 072 97.080 Safety Part 2-72: Particular requirements for automatic machines for floor treatment for commercial and industrial use

SANS 60335-2-84 SABS IEC 60335-2-84 2.02 Household and similar electrical appliances - IEC 60335-2-84:2008 +AM 1:2008 IDT 50.60 2014-10-06 072 91.140.70 Safety Part 2-84: Particular requirements for +AM 1:2008 toilets +AM 2:2013 +AM 2:2013 +Cor 1:2003 +Cor 1:2003

SANS 60335-2- 1.02 Household and similar electrical appliances - IEC 60335-2-102:2012 +AM 1:2008 IDT 50.60 2014-10-06 072 97.100.01 102 Safety Part 2-102: Particular requirements for +AM 1:2008 gas, oil and solid-fuel burning appliances having electrical connections +IS 2:2012 +IS 2:2012

SANS 60335-2- 1.02 Household and similar electrical appliances - IEC 60335-2-105:2013 +AM 1:2008 IDT 50.60 2014-10-06 072 91.140.70 105 Safety Part 2-105: Particular requirements for +AM 2:2013 multifunctional shower cabinets

SANS 60335-2- 1.01 Household and similar electrical appliances - IEC 60335-2-109:2013 +AM 1:2013 IDT 50.60 2014-10-06 072 13.060.20 109 Safety Part 2-109: Particular requirements for 13.120 UV radiation water treatment appliances 91.140.60 97.030

SANS 60350-1 2014-11-30 1 Household electric cooking appliances - Part IEC 60350-1:2011 IDT 50.20 2014-10-07 075 97.040.20 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance

SANS 60598-1 SABS IEC 60598-1 2014-10-31 6 Luminaires Part 1: General requirements and IEC 60598-1:2014 IDT 50.60 2014-10-26 064-02 29.140.40 tests

SANS 60890 2014-10-30 2 A method of temperature-rise verification of IEC/TR 60890:2014 IDT 50.60 2014-09-19 067-02 29.130.20 low-voltage switchgear and controlgear assemblies by calculation

SANS 60947-4-3 SABS IEC 60947-4-3 2014-10-30 2 Low-voltage switchgear and controlgear Part IEC 60947-4-3:2014 IDT 50.60 2014-09-19 067-02 29.130.20 4-3: Contactors and motor-starters - AC 31.180 semiconductor controllers and contactors for non-motor loads

A- 32 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 60950-1 2.02 Information technology equipment - Safety IEC 60950-1:2005 +AM 1:2012 IDT 50.20 2014-09-16 072 35.020 Part 1: General requirements +AM 2:2013 35.260 +Cor 1:2006

SANS 61121 2014-12-31 2 Tumble dryers for household use - Methods IEC 61121:2012 IDT 30.20 2014-09-10 075 97.060 for measuring the performance

SANS 61290-3 2009-06-30 2 Optical amplifiers - Test methods Part 3: IEC 61290-3:2008 IDT 50.60 2009-06-30 079 33.180.30 Noise figure parameters

SANS 61534-21 2014-12-31 1 Powertrack systems - Part 21: Particular IEC 61534-21:1111 IDT 50.60 2014-10-10 067-03 requirements for powertrack systems intended for wall and ceiling mounting.

SANS 61534-22 2014-12-31 2 Powertrack systems Part 22: Particular IEC 61534-22:2014 IDT 50.60 2014-10-10 067-03 29.060.10 requirements for powertrack systems intended 29.120.20 for on floor or under floor installation 29.140.50

SANS 61850-3 2014-08-30 2 Communication networks and systems for IEC 61850-3:2013 IDT 50.60 2014-07-11 067-07 29.240 power utility automation Part 3: General 33.040.40 requirements 33.200

SATR 61850-7- 2014-12-31 1 Communication networks and systems for IEC 61850-7-510:2012 IDT 20.00 2014-09-12 067-07 510 power utility automation - Part 7-510: Basic communication structure - Hydroelectric power plants - Modelling concepts and guidelines.

SATR 61850-90-5 2014-12-31 1 Communication networks and systems for IEC 61850-90-5:2012 IDT 20.00 2014-09-12 067-07 power utility automation - Part 90-5: Use of IEC 61850 to transmit synchrophasor information according to IEEE C37.118

SANS 61851-23 2014-12-31 1 Electric vehicle conductive charging system - IEC 61851-23:2014 IDT 20.00 2014-09-12 067-07 Part 23: DC electric vehicle charging station.

SANS 61851-24 2014-12-31 1 Electric vehicle conductive charging system - IEC 61851-24:2014 IDT 20.00 2014-09-12 067-07 Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging

SANS 61869-4 2014-08-30 1 Instrument transformers - Part 4: Additional IEC 61869-4:2013 IDT 50.60 2014-08-30 067-05 requirements for combined transformers

SANS 62035 SABS IEC 62035 2014-10-31 2 Discharge lamps (excluding fluorescent IEC 62035:2014 IDT 20.00 2014-08-22 064-01 29.140.30 lamps) - Safety specifications

A- 33 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 62040-4 2014-11-30 1 Uninterruptible power systems (UPS) Part 4: IEC 62040-4:2013 IDT 50.20 2014-09-18 069 Environmental aspects - Requirements and reporting

SANS 62052-21 2014-11-30 1 Electricity metering equipment (a.c.) - General IEC 62052-21:2004 IDT 50.60 2014-10-03 062 requirements, tests and test conditions - Part 21: Tariff and load control equipment

SANS 62053-24 2014-12-31 1 Electricity metering equipment (a.c.) - IEC 62053-24:2014 IDT 20.00 2014-08-29 062 Particular requirements -Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1)

SANS 62053-31 2014-12-31 1 Electricity metering equipment (a.c.) - IEC 62053-31:1998 IDT 50.20 2014-09-18 062 Particular requirements - Part 31: Pulse output devices for electromechanical and electronic meters (two wires only)

SANS 62054-21 2014-12-31 1 Electricity metering (a.c.) - Tariff and load IEC 62054-21:2004 IDT 50.60 2014-10-03 062 control - Part 21:Particular requirements for time switches

SANS 62196-1 2014-12-31 2 Plugs, socket-outlets, vehicle connectors and IEC 62196-1:2014 IDT 20.00 2014-09-12 067-03 29.120.30 vehicle inlets - Conductive charging of electric 43.040.10 vehicles Part 1: General requirements 43.120

SANS 62196-3 2014-12-31 1 Plugs, socket-outlets, vehicle connectors and IEC 62196-3:1111 IDT 50.60 2014-10-10 067-03 vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers.

SANS 62253 2014-11-30 1 Photovoltaic pumping systems - Design IEC 62253:2011 IDT 50.60 2014-10-03 069 27.160 qualification and performance measurements

SANS 62271-201 2014-08-31 2 High-voltage switchgear and controlgear Part IEC 62271-201:2014 IDT 50.60 2014-07-11 067-01 29.130.10 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV

SANS 62271-211 2014-10-31 1 High-voltage switchgear and controlgear - Part IEC 62271-211:2014 IDT 50.60 2014-09-19 067-01 211: Direct connection between power transformers and gas-insulated metal- enclosed switchgear for rated voltages above 52 Kv

SANS 62282-3- 2014-08-31 1 Fuel cell technologies - Part 3-300: Stationary IEC 62282-3-300:2012 IDT 50.20 2014-10-07 063 27.070 300 fuel cell power systems - Installation

A- 34 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SATS 62282-7-2 2014-08-31 1 Fuel cell technologies - Part 7-2: Test methods IEC/TS 62282-7-2:2014 IDT 20.00 2014-06-06 063 27.070 - Single cell and stack performance tests for solid oxide fuel cells (SOFC)

SATR 62368-2 2013-10-31 1 Audio/video, information and communication IEC/TR 62368-2:2011 IDT 20.00 2013-08-30 072 33.160.01 technology equipment Part 2: Explanatory 35.020 information related to IEC 62368-1

SANS 62485-3 2014-10-31 2 Safety requirements for secondary batteries IEC 62485-3:2014 IDT 20.00 2014-08-15 063 29.220.20 and battery installations Part 3: Traction batteries

SANS 62504 2014-10-31 1 General lighting - Light emitting diode (LED) IEC 62504:2014 IDT 20.00 2014-08-22 064-01 products and related equipment - Terms and definitions

SANS 65700-19- 2014-12-31 1 Bushings for DC application IEC/IEEE 65700-19-03:2013 IDT 50.60 2014-10-10 067-04 03

SANS 101953-2-1 2014-11-30 1 Access network xDSL transmission filters; Part ETSI TR 101953-2-1:2003 IDT 20.00 2014-08-15 074-04 2: VDSL splitters for European deployment; Sub-part 1: Specification of Testing methods for low pass part of VDSL/POTS splitters

SANS 300220-1 2014-03-31 3 Electromagnetic compatibility and Radio ETSI EN 300220-1:2012 IDT 50.20 2014-10-07 074-05 33.060.20 spectrum Matters (ERM); Short Range 33.100.01 Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Technical characteristics and test methods

SANS 300296-2 2014-09-30 2 Electromagnetic compatibility and Radio ETSI EN 300296-2:2013 IDT 50.20 2014-08-14 074-05 33.060.20 spectrum Matters (ERM); Land Mobile 33.100.01 Service; Radio equipment using integral antennas intended primarily for analogue speech Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

SANS 300330-1 2014-10-31 3 Electromagnetic compatibility and Radio ETSI EN 300330-1:2010 IDT 20.00 2014-08-08 074-05 33.060.20 spectrum Matters (ERM); Short Range 33.100.01 Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 1: Technical characteristics and test methods

A- 35 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 300330-2 2014-09-30 3 Electromagnetic compatibility and Radio ETSI EN 300330-2:2010 IDT 50.60 2014-09-12 074-05 33.060.20 spectrum Matters (ERM); Short Range 33.100.01 Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN covering the esssential requirements of article 3.2 of the R&TTE Directive

SANS 300422-1 2014-09-30 2 Electromagnetic compatibility and Radio ETSI EN 300422-1:2011 IDT 50.60 2014-09-14 074-05 33.050.99 spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 1: Technical characteristics and methods of measurement

SANS 300440-1 2014-09-30 2 Electromagnetic compatibility and Radio ETSI EN 300440-1:2010 IDT 50.60 2014-09-14 074-05 33.060.99 spectrum Matters (ERM); Short range devices; 33.100.01 Radio equipment to be used in the 1 GHz to 40 GHz frequency range Part 1: Technical characteristics and test methods

SANS 301091-2 2 Electromagnetic compatibility and Radio ETSI EN 301091-2:2006 IDT 50.60 2014-09-12 074-05 33.100.01 spectrum Matters (ERM); Short Range 35.240.60 Devices; Road Transport and Traffic Telematics (RTTT); Radar equipment operating in the 76 GHz to 77 GHz range; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

SANS 301357-1 2014-09-30 2 Electromagnetic compatibility and Radio ETSI EN 301357-1:2008 IDT 50.60 2014-09-12 074-05 33.100.01 spectrum Matters (ERM); Cordless audio 33.160.50 devices in the range 25 MHz to 2 000 MHz Part 1: Technical characteristics and test methods

SANS 301406 2014-09-30 2 Digital Enhanced Cordless ETSI EN 301406:2009 IDT 50.60 2014-09-14 074-05 33.070.30 Telecommunications (DECT); Harmonized EN for Digital Enhanced Cordless Telecommunications (DECT) covering the essential requirements under article 3.2 of the R&TTE Directive; Generic radio

A- 36 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 301908-1 2014-10-31 2 Electromagnetic compatibility and Radio ETSI EN 301908-1:2013 IDT 20.00 2014-10-10 074-05 33.100.01 spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT- 2000 Third-Generation cellular networks Part 1: Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive

SANS 301908-2 2015-01-31 2 Electromagnetic compatibility and Radio ETSI EN 301908-2:2013 IDT 20.00 2014-10-10 074-05 33.100.01 spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT- 2000 Third-Generation cellular networks Part 2: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive

SANS 301908-3 2015-01-31 2 Electromagnetic compatibility and Radio ETSI EN 301908-3:2013 IDT 20.00 2014-10-10 074-05 33.060.20 spectrum Matters (ERM); Base Stations (BS), 33.100.01 Repeaters and User Equipment (UE) for IMT- 2000 Third-Generation cellular networks Part 3: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive

SANS 301908-4 2015-01-31 2 Electromagnetic compatibility and Radio ETSI EN 301908-4:2013 IDT 20.00 2014-10-10 074-05 33.060.20 spectrum Matters (ERM); Base Stations (BS), 33.100.01 Repeaters and User Equipment (UE) for IMT- 2000 Third-Generation cellular networks Part 4: Harmonized EN for IMT-2000, CDMA Multi- Carrier (cdma2000) (UE) covering essential requirements of article 3.2 of the R&TTE Directive

SANS 301908-5 2015-01-31 2 Electromagnetic compatibility and Radio ETSI EN 301908-5:2011 IDT 20.00 2014-10-10 074-05 33.060.20 spectrum Matters (ERM); Base Stations (BS), 33.100.01 Repeaters and User Equipment (UE) for IMT- 2000 Third-Generation cellular networks Part 5: Harmonized EN for IMT-2000, CDMA Multi- Carrier (cdma2000) (BS and Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive

A- 37 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

SANS 301908-6 2015-01-31 1 Electromagnetic compatibility and Radio ETSI EN 301908-6:2011 IDT 20.00 2014-10-10 074-05 33.060.20 spectrum Matters (ERM); Base Stations (BS), 33.100.01 Repeaters and User Equipment (UE) for IMT- 2000 Third-Generation cellular networks Part 6: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive

SANS 302208-2 2012-06-29 1 Electromagnetic compatibility and Radio ETSI EN 302208-2:2010 IDT 50.60 2012-04-24 074-05 33.060.20 spectrum Matters (ERM); Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W: Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

SANS 103388 2014-11-30 1 Transmission and Multiplexing (TM); Access ETSI TS 103388:2008 IDT 20.00 2014-08-15 074-04 transmission systems on metallic access cables; Asymmetric Digital Subscriber Line (ADSL2) -European specific requirements

SANS 1691 2014-12-31 1 Household refrigerating appliances - EN 62552:2013 IDT 50.20 2014-10-07 075 97.040.30 Characteristics and test methods EN Common Modification

SANS 62282-4- 2014-11-30 1 Fuel cell technologies - Part 4-101: Fuel cell IEC 62282-4-101:2014 IDT 20.00 2014-10-03 063 27.070 101 power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks

ARP 032 2014-01-31 1 Guidelines for the modification of luminaires 35.20 2014-07-21 064-02 29.140.30 for tubular fluorescent lamps to retro-fit LED 29.140.40 tubular lamps or T5 semi-luminaires

ARP 037 2015-02-28 1 Safety of playgrounds - Part 1: Guide for 20.00 2014-08-08 1090 playground supervision

ARP 051 2012-12-24 2 Steel wire rope end connections 20.00 2010-11-26 1020 53.020.30 77.140.65

ARP 451 2012-12-24 1 Application of SANS 451 20.00 2010-11-05 1039 11.040.10

ARP 1048 1 Rehabilitation of wildlife 20.00 2011-07-29 1040-07

A- 38 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014 TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS

SANS NUMBER SABS NUMBER TA ED TITLE INTERNATIONAL RELATEDNESS STAGE STAGE DATE COMMITTEE ICS

ARP 1717 2015-11-30 2 Guide to the regulatory requirements for the 20.00 2014-06-20 1064 71.100.30 approval of detonators, initiators and initiation systems used in mining and civil blasting applications

ARP 7812 2009-06-30 2 South African national scheme for Issuer ISO/IEC 7812-1:2006 NEQ 20.00 2008-10-10 001-17 Identification Numbers (IIN) and Application Identification numbers (AID) ISO/IEC 7812-2:2007 NEQ ISO/IEC 7816-5:2004 NEQ

ARP 24156 2009-10-31 1 Guidelines for using UML notation in ISO/TR 24156:2008 IDT 50.60 2009-10-15 037 01.020 terminology work

ARP 033 2014-10-30 1 Single use medical devices 20.00 2014-03-28 1039

CKS 637 2012-07-31 2 Tents (hip-roof, cottage, bow and belt types) 20.00 2010-11-19 1085

VC 8016 3 Protective helmets and of their visors for 50.00 2014-06-06 REGULATORY 13.340.20 drivers and passengers of motor cycles and mopeds

VC 9008 1 Energy efficiency and labelling of electrical 50.00 2014-02-07 REGULATORY 29.020 and electronic apparatus 29.100 97.030

SANS 60229 2014-08-31 1 Electric cables - Tests on extruded IEC 60229:2007 IDT 50.60 2014-08-01 066 oversheaths with a special protective function

A- 39 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER 2014