MAIER blind machines for producing jackets

1 11 Automatic -in of fixing tapes 2 Class 251-41

2 4

Lapel roll-padding Class 230 and 230 RPA

3

Book for unlined and half-lined jackets Class 221-18/1

4

Blind hemming jacket front interfaces 11 3 Class 230 9 8

5

Closing a at the bottom of a jacket Class 512

328 More machines, photos, descriptions, prices - www.strima.com 11

Tacking Class 610, 660

11

10

Blind hemming of inserts Class 251

Sewing sleeve linings from inside 9 Class 510 1

10

Sewing sleeve linings from outside Class 510

8

6 7 5

7

Hemming unlined or half-lined jackets 6 Class 512 L

Hemming unlined or half-lined jackets Class 352

329 MAIER blind stitch machines for producing jackets

programmed seam sequences. Fully Automatically sewing-in equipped with monitor, piece 1 fixing tapes 2 4 Roll padding collars sewing-in counter, sewing light and compressed air Class 251-41 Class 230 gun. Customer settings can be changed By blind-stitching the fixing tape for the The ideal machine for roll padding collars rapidly - seam distances, sewing speed, front part of the jacket, the interface is and when tailoring high quality stitch length and the roll effect. fixed in when the jacket is pressed later. jacket and coats. Plunger and press feet This ensures gentle handling. sit almost vertically beneath the needle plate. This guarantees accurate stitching 3 Book seaming on sheer and thick materials. When the roll horn is used to support the fabric, Class 221-18/1 outstanding roll padding work can be High quality book seaming - hand-sewn achieved. quality. This narrow offers advantages when the garment is pressed. The machine is equipped with a long arm, No pressing marks occur on the outside of and thus has a wide throughway. This is the jacket, as happens when working with particularly useful when tailoring over- back stitch. Supplied with an integrated coats. The arm and base plate are cast in special folder for easy folding and one piece. This means that the machine is adjustable wide overstitch. The folders very quiet - even at high speeds. can be supplied for different hem widths and fabric thicknesses.

Sewing-in lining in jacket 8 9 sleeve Class 510 Two-thread blind stitching machine for sewing sleeve linings into high quality jackets and overcoats. The The seamstress’s work is limited to If the roll horn is removed and optional backstitch makes for a secure and sturdy inserting the piece and guiding the front fabric support table swivelled in, other seam. of the jacket. hemming tasks can be carried out as well. So class 230 is most suitable anywhere With class 510, the seam can be sewn The following tasks are carried out where universal blind stitch sewing from outside on a closed sleeve, or from automatically: laying, sewing and cutting machines are required. For men’s, youth, inside on an open sleeve. When sewing the tape, cutting the thread and lowering and women’s garment production, and in from outside a standard thread layer is the presser feet. All these functions are ’ workshops. used, to provide a hand-stitched look controlled by the electronic motor. (zigzag).

The garment is easy to guide over the Class 230 RPA large fabric support table. The tape feed Roll padding machine can be swivelled. Then the machine can be This symmetrical 2-head machine can be used as a normal class 251. used for automated roll padding work on the right and left hand lapels. Class 230 Work station with upper section class RPA is the perfect equipment for series 251 (spring-loaded plunger), tape production of high-quality jackets. drawing and tape feed device (tape width 10 – 30 mm). By using a left-hand and right-hand sewing head it is possible to achieve completely even seams, and a naturally If the sleeve seams are worked from the rolled . The automation achieves a inside, no thread layer is used. This high level of efficiency. produces two parallel rows of thread.

The perfect arrangement of the pre-feed The spring-loaded plunger does not close and differential rollers achieves optimum the sleeve vent. The convenient arm garment visibility and makes it very easy extension serves as fabric support, for the operator to insert the jacket front. helping the seamstress to guide the material for sewing. The entire work process is controlled by a two- operation. It is very easy to operate with a menu-driven touch-screen display, combined with an up-to-date micro-processor control system. It is an easy matter to change the automatically Class 230 RPA

330 More machines, photos, descriptions, prices - www.strima.com The machine is supplied as standard with 11 Tacking 10 Blind hemming PFL-P ventilation

Class 610, Class 660 Class 251 A swinging needle bar makes it possible The machine for countless applications: Interfacing is blind hemmed using the to alternate the needle stitching in the jackets, trousers, dresses, pullovers, standard class 251 blind stitch sewing lining or the jacket material. shirts, scarves, ties.... machine. Please see page 4 for a detailed description of this standard machine. With the two separately operating The tacking machine can be used in plungers, the can be strimaTV many ways. With the extensive range of watch film adjusted to suit the lining and jacket accessories the widest possible range of fabrics. The spring-loaded plunger tacking operations can be carried out with ensures the class 512L will sew over no marks. * cross seams without problem. 6 Hemming half-lined and unlined jackets The class 512L is equipped with a lower 7 feed unit as standard and a differentiated lateral feed for working in added width. Class 352 The advantage lies in the way the lining is The class 352 double blind stitch sewing loosely sewn in. machine sews this type of hem. Please see page 5 for a detailed description of this standard blind stitch machine. Lining at the bottom 5 of the jacket

Class 512 Two-thread back stitch blind stitching For jacket-making this machine is used machine for high-quality lining closure at for the following jobs: Spot sewing labels, the bottom edge of the jacket. The seam securing linings, seam and hem inserts, as is invisible both inside and out. well as contoured forms.

The needle plate is easy to change to various needle plate sections, making it easy to work with both sheer and thick fabrics. The stitch loosening finger can Class 252 be brought in to ensure extremely loose Universal double blind stitch machine (the tacking. seam is not visible neither on the inside nor the outside) with wide needle plate cutout for medium and heavy fabrics Additional equipment for class 660 (e.g. duffel), automatic spring-loaded rib shafts device (plungers) ensures high The display unit makes it easier to set the quality even when sewing over cross A swinging needle bar makes it possible correct stitch depth. Using stepped seams. to alternate the needle penetration into motor technology up to 20 different strimaTV the lining or the jacket material. With the stitch depth values can be stored and watch film two separately operating plungers, it is called up separately, or in programmed possible to adjust the sewing machine sequences. The stitch count can be to suit the lining and jacket fabrics. The pre-selected and is programmable. The spring-loaded plunger ensures the class standard electronics system, proven over Class 512 L 512L will sew over cross seams without many years, ensures that the machines Two-thread backstitch blind stitch sewing problem. enjoy low maintenance and minimum machine for high quality jacket hems. The wear. seam is invisible both inside and out. The class 512L is equipped with a lower feed unit as standard and a differentiated lateral feed for working in added width. The advantage lies in the way the lining is loosely sewn in.

When working on half-lined and unlined jackets the jacket lies to the right of the needle. That is why the class 512L is designed as a long arm version. It is easy to use, thanks to the increased throughway (500 mm) and a large detachable work support.

331 MAIER blind-stitch machines for making trousers and skirts

1

Waistband European style Class 250-32

3

2 1 2 8 Waistband American style 4 Class 250-32

Tacking Class 610, 660

3

5

High arch on table to hem trouser legs Sub-class - 50 4 5 6 7 Tacking Class 610, 660

332 More machines, photos, descriptions, prices - www.strima.com 8

Belt loops Class 221-19/2

7

8 7

7 Hemming, double blind stitch 6 7 Class 252, 352

6 7 Hemming Simple blind stitch Class 221, 241, 251, 271

6

6

333 MAIER blind-stitch machines for making trousers and skirts

Waistbands – European tacking operations can be carried out with Belt loops for trousers, 1 2 and American styles no marks. 8 skirts and coats

Class 250-32 It is particularly suitable for trousers, Class 221-19/2 The high-quality Italian style is outstand- when tacking waistband linings, pockets High performance machine for making ing for comfortable wear and fashionable and additions to the trousers. double-folded belt loops with insert tape. design. Blind stitch seams provide the The machine is equipped with a front means to produce the style, and are a The needle plate is easy to change to cutter which cuts any fabric residues to characteristic of the quality. various needle plate sections, making it the required width for the folder integrat- easy to work with both sheer and thick ed inside the machine. The cutting device fabrics. The stitch loosening finger can be is equipped with hard metal hook knives. brought in to ensure that the tacking is very loose.

Additional equipment for class 660 The display unit makes it easier to set the correct stitch depth. Using stepped motor technology up to 20 different When blind hemming a trouser waistband, stitch depth values can be stored and we differentiate between the European called up separately, or in programmed and the American methods. sequences. The stitch count can be pre-selected and is programmable. The Class 250-32 blind stitch sewing standard electronics system, proven over Two upper feed units, one in front of and machines are excellent for hemming many years, ensures that the machines one behind the needle, ensure problem- waistbands in both versions. The spring- enjoy low maintenance and min. wear. free feeding. The special folders can be loaded plunger means that when sewing supplied for loop widths between 6.5 over pockets and belt loops only the 6 Blind stitch sewing and 12 mm and for different fabric upper layer of the fabric is penetrated. 5 machines for hemming thicknesses. A special quick fastener The spring tension of the plunger can be 7 trousers and skirts allows the folders to be changed quickly regulated to suit the fabric. within a belt loop width.

The arched detachable work support and Class 221-19/2-B/1/K the extended presser feet prevent belt Class 221-19-B/2/K loops and pockets from getting caught , fold, blind hem and press - all in and preventing a smooth feed. The one work process. Automatic belt loop presser feet, which open wide, make it machine with upper section of sewing easier to handle and insert the waistband. machine, frame base, electronic motor and pressing station. This machine is The class 250-32 can be fitted with stitch Depending on the material used, several supplied fully ready for use. In c burling at the end of the seam, sub-class machines from our “compact” or ombination with a separate cutter or 48. The last stitch is knotted, preventing “universal” ranges are suitable for this rolling up device, it is possible to the seam from coming loose. type of work, e.g. class for single blind automate the making of belt loops. stitching (visible only on the left side of product): 220, 221, 221-31, 271, 271- Sub-class B/1 31, 240, 241, 241-31, 251, 251-31, Tacking Including a steam iron with integral steam 3 4 for double blind stitching (entirely not suction and electronic puller with visible): 252, 352. stepping motor control External steam Class 610, class 660 Additionally subclass - 50 – fast rounded and compressed air supply. The machine for countless applications: table, considerably facilitate work during jackets, trousers, dresses, pullovers, hemming legs of trousers. Subclass Sub-class B/2 shirts, scarves, ties.... suitable for blind stitch machine class Including two irons (no steam) for 241 and 251. working fixable insert tapes in thick materials. Including electronic puller with stepping motor control. External compressed air supply.

Blind stitch machine class 271 (medium fabrics) and 271-31 (fine fabrics) is a special machine for hemming legs of trousers. Equipped with spring-loaded rib The tacking machine can be used in many shaft device (plunger) ensures high qual- ways. With the extensive range of ity even when sewing over cross seams. accessories the widest possible range of

334 More machines, photos, descriptions, prices - www.strima.com MAIER blind-stitch machines for making trousers and skirts

Stitch burling at end of seam Sub-class –48

You’ve sewn a seam and it unravels? Now that is a thing of the past!! With our special burling function with integral thread cutter, the final stitch is properly knotted. That stops the seam from coming undone accidentally. Reduce such undesirable costs with a perfect seam that will not come undone.

Suitable for classes 251, 251-31, 251- 25, 250-32, 252, 352. Class 251-48

Differential feed –20

Combined with the -40 pre-feed unit, the differential feed allows fullness to be worked in automatically in flared skirts, dresses etc. The differential feed is steplessly adjustable and makes it easy for the seamstress to incorporate the fullness evenly.

A set screw is used to make the adjustment.

Example of seam, sub-class –48 Sub-class –40

Example of seam, sub-class –20

Pre-feed Class 251-40

The pre-feed system, with an extra feeder operating in front of the needle, allows the seam to start right at the edge of the fabric. Ideal for split skirts, curtains etc. Can be combined with sub-classes –10, -20, -31.

Example of seam, class 251-40

335 MAIER blind-stitch machines for special applications Fittings for blind hemming drapes and net curtains

Sub-class –37 Puller – fabric feed aid Sub-class –45/3 Conveyor belt Sub-class –29/1 Programmable electronic stitch depth setting A valuable aid to feeding the item over the The puller is built in directly behind the . The seamstress is able to needle plate. It works intermittently and This stitch depth setting makes it concentrate fully on guiding the hem edge ensures that the fabric is advanced evenly possible to call up or change to different and on the actual sewing process. The and gently, even when the quality of the programmable stitch depths. conveyor is incorporated into the sewing material makes this difficult. A stepping table and is ideal for very large items such motor provides the drive mechanism. A display unit makes it easier to set the as drapes. The machine is installed flush correct stitch depth. Using stepped with the table. Supplied for class 251, 261, motor technology up to 20 different and also in combination with the stitch depth values can be stored and A synchronous drive mechanism advances following sub-classes: called up separately, or in programmed the conveyor towards the fabric feed. -10 velvet fitment, sequences. - 25 for thick materials, Sub-class – 37 can also be used in - 37 conveyor belt on sewing table, The values can be changed on a keyboard, combination with the puller – sub-class -37/1 flush fitting using the knee lever or stitch counter – 29/1. Please enquire about belt length (motor dependent). and table size.

Sub-class –37/1

Blind stitching machine built-in flush with table level. This installation provides crucial advantages particularly for large items.

Sub-class -29/1

Class 241 – 37/1 with accessories - 12 thread cutter - 29/1 puller feed - 40 pre-feed

336 More machines, photos, descriptions, prices - www.strima.com MAIER blind-stitch machines for special applications Special machines for blind hemming thick and heavy materials (quilts, duvets, mattresses, neoprene suits etc.)

Class 261 Class 251-25 Fabric feed aid – puller –29/1

Special model for working particularly For thick material, with spring-loaded The puller is built in directly behind the thick and heavy materials and strong plunger shaft. The spring resistance can needle plate. It operates intermittently cross seams, in ladies’ gentlemen’s and be adjusted steplessly to suit the type and ensures that even difficult materials sports clothing, for drapes, quilts, of material. Where it is necessary to are advanced evenly and gently. Feed neoprene suits and for blind hemming sew over a cross seam, a pocket or other progress is adjusted to optimum with the bindings on car seats. With a spring- place where the fabric is thicker, the aid of the most up-to-date stepping loaded plunger and also with the carriage fabric pusher latch presses the plunger motor technology. plate set lower, thus giving more down and the needle stitches only the throughway height. upper layer of fabric, so the outside is not Supplied as classes: marked with thread take-up. With skip 251-29/1, 261-29/1 stitch device switchable between 1:1/1:2.

Class 261

Sub-class -29/1

Class 261 L

The long-arm machine with 500 mm working width, and large 1050 mm work Belt feed – class 261-39/1 support. The belt feed is an important aid when working with difficult-to-feed materials, such as neoprene, leather or synthetic leather. Optimum adjustment of belt progress. It works intermittently using the most up-to-date stepping motor technology.

Blind-stitch machines for rolled hems (neck-scarves, head-scarves, nightwear, blouses, underwear etc.)

Class 221-23/1 with integral spring-loaded hemmer. This allows you to sew over cross-seams, for example on blouses, night attire, underwear etc.

Can be supplied with a folder for different hem widths. We require an example of the seam and a material sample in order to establish the correct folder for the task.

Example of seam from class 221-23/1

337 MAIER blind-stitch machines for special applications Blind stitch machine for sewing rooms, ateliers, service points etc.

strimaTV Class 221 watch film An outstanding quality of hem is a sign of quality work in custom production at tailoring establishments.

The Class 221 is the ideal blind stitch machine for tailoring establishments; it is able to handle the wide variety and quali- ties of fabrics that such workshops have to handle.

With skip stitch device 1:1/1:2 (1:3 as option).

Top section of the sewing machine for fitting to a sewing machine frame.

Class 221

Class 211

Low cost design (baby model)

Designed especially for alteration workshops. Portable and can be used with attached motor for medium materials.

With skip stitch device between 1:1 / 1:2.

338 More machines, photos, descriptions, prices - www.strima.com Fitments and accessories for MAIER blind stitch machines

Sub-class –10 Sub-class –35 PFL-M

For blind stitching velvet, velour, etc. - Large add-on support table Electro-magnetic presser foot leaving no marks. These machines are for large items. ventilation for automatic lowering of the equipped with gentle springs, rounded support plate, combined with an elec- plunger and highly polished sewing tools. Fitted to the sewing table. Please state tronic motor. And of course this sub-class can also be the machine class. used to blind-stitch normal fabric PFL-P qualities (woven materials). Suitable for classes 241, 251, 261, 252, 352. Pneumatic presser foot ventilation for Suitable for class 251. automatic lowering of the support plate, combined with an electronic motor. Sub-class –46

Add-on for mini-motors made by Efka and For Maier blind stitch machines both Quick and fitted directly to the body of clutch and electronic motors are the machine. Can be retro-fitted. suitable. Applying electronic motor enables automatize of work through use Suitable for classes 220, 221, 240, 241, such equipment as e.g. electromagnetic 250, 261, 271, 252, 352. thread trimmer, digital display for set stitch depth, device for electromagnetic lowering of the support table and many others.

Ask our salesmen in which automatic functions we can equipped blind stitch machine for you.

Sub-class –12 Electro-magnetic thread cutter

Fast, secure, problem-free. Combined Sub-class –D with a position motor and automatic presser foot it is very easy to operate, Digital display unit for the set stitch providing a rationalisation effect. depth or plunger position. A valuable rationalisation aid to finding an earlier plunger setting. Stepless adjustment of Suitable for classes 220, 221, 230, 240, plunger. 241, 250, 251, 261, 271, 252, 352. The setting accuracy per increment is 0.002 mm. Power is supplied through power supply unit. So no battery is required to act as buffer for the digital display unit.

Suitable for classes 220, 221, 240, 241, 251, 261, 271, 610. Classes 252 and 352 for the left-hand plunger.

339