Lot Make Model Description Cond Qty Location Price Category We Have No Idea What This Is - Some Sort of Film Sync Unit? UNTESTED, Sold As Is
Total Page:16
File Type:pdf, Size:1020Kb
Lot Make Model Description Cond Qty Location Price Category We have no idea what this is - some sort of film sync unit? UNTESTED, sold as is. Excellent cosmetic condition - looks hardly used. Adjustable bottom height, one chunky 4-pin captive lead, and a lead for the auto-start system Very 5555 various Elmo Tape Sound FP unit (which almost looks like early optical cable, but who knows?). The mains socket is a Japanese two-pin. This is from 1 Uk 15 GBP Miscellaneous good the collection amassed by Felix Visser, former head of Synton. They have mostly been stored unused for a number of years. Telefunken VF14M Tube Nr214 for Neumann U47, U48. NOS. Hand selected. Maybe other auctions were cheaper. In most cases these tubes had not been tested in the microphone and a tubetester. Perhaps they work, if you had luck, but mostly they are noisy and microphonic. This tube is handselected and professionally burnt in from the most VF14M Tube for Neumann qualified tec for this sort of stuff (Andreas Grosser Berlin). NOS and carefully tested on tube testers and in the Very 1221,06 6139 Telefunken 1 Germany Microphone U47 U48 NOS microphone (3 days non stop). Because it is vintage (ca 50 years old) and I have no control over the way it is treated good GBP by the buyer, this is sold as is. No return or refund. (VEMIA note: this seller knows what he is talking about when it comes to classy vintage German microphones and pre-amps. He has been a regular buyer and seller here for more than ten years.) Telefunken AC701 Tube for Neumann, Schoeps, Telefunken, Brauner and AKG mics like M49, M50, KM54(KM254), KM53(KM253), KM56(KM256), SM2, M221, C60, M269, SM69, VMA etc etc. New old stock (NOS). Because it is AC701 Tube for Neumann 300,57 6140 Telefunken vintage (ca 50 years old) and I have no control over the way it is treated by the buyer, this is sold as is. No return or Near mint 1 Germany Microphone Mics NOS GBP refund. (VEMIA note: this seller knows what he is talking about when it comes to classy vintage German microphones and pre-amps. He has been a regular buyer and seller here for more than ten years.) Telefunken V676a Preamp with PSU and connector. This item is in perfect working order, but due to its age and V676a Mic because it is vintage (30-50 years old): sold as is. No return or refund. (VEMIA note: this seller knows what he is 262,06 6156 Telefunken Good 1 Germany Preamp Preamp+PSU+Connector talking about when it comes to classy vintage German microphones and pre-amps. He has been a regular buyer and GBP seller here for more than ten years.) Z-10 for Tube Mics M50 Neumann Z-10. With this Unit you can drive 2 Tube Microphones like M49 (M249), M50(M250), KM54(KM254), 160,62 6158 Neumann Good 1 Germany Microphone M49 KM54 etc KM53(KM253), KM56(KM256), M221 etc etc with one PSU. Ultra rare. GBP Video, BNC and car-type Ten cables:- six video, two long high-quality BNC, and two high-quality Neutrik 1/4 inch jack to car-type RCA gold- Very 6276 various 1 Uk 15 GBP Accessory cables plated. From Ed Starink, one-owner. good CSQ600 is a great analog sequencer and the flagship of the analog sequncer of ROLAND. many possibilities, 4 memory parts which can be played in the order you want (long sequence can be played!), portamento included, Cv only or Cv gate can be used, SYNC Load rhythm 4/4 and 3/4 slider) Calibration pot, play MODE : One time or repeat mode and KCV ADD.. for more details see photo. On the back, there are 14 sockets: INPUT CV and GATE, 244,21 6655 Roland CSQ600 Good 1 France Sequencing Workstation OUTPUT CV and GATE, CSQ SYNC in and OUT, EXT control IN( step, start, stop) CONTROL OUT for CR 78 (start, GBP stop)RHYTHM SYNC (clock and start/stop) and SYNC OUT (roland Sync output socket) Very quick to program: to enter sequence, play on an analog synth keyboard and enter what you play using Input CV & Gate sockets, and for playing use output sockets. Rare four-channel vintage electronic drum sequencer! Uses strange squidgy pads for Stop, Play and Load. No power 6857 Star Synare Sequencer supply, so not tested at VEMIA. Stated by the owner as originally in working condition, but **SOLD AS IS** - Good 1 Uk 55 GBP Hardware Sequencer especially as it has sat here packed up for some time. Rare, solidly-built six-channel mixer for Synare (or I guess other) synth drum set-ups. Powered up fine (110V) and was in decent working order. **BUT WAS UNSOLD, HAS SAT FOR SOME TIME, PACKED UP, AND IS SOLD AS IS!!** Cosmetically the sockets, knobs and main panel were very good. The nuts and screws of some sockets were 6868 Star Synare Mixer SM-61 Good 1 Uk 55 GBP Electronic Drumkits rusty, there was some paint damage to top edges - back and sides - and there were three stick-on feet missing. But overall it looked and felt very good. Also has a useful 15V DC 1A output - if only I knew which of the other Synare products that was designed to power...! Packing £2. Great-sounding drum machine, with a nice groove - a lot of the currently-entered patterns have a Latin feel. The bass Near 6901 Kawai R100 drum pad sticks quite often, but apart from that, everything tested seems fine. A bit scuffed, so probably about 6.5/10 1 Uk 48 GBP Drum Machine good cosmetically. 110V. **SOLD AS IS - unsold from previous auction, pre-packed and not re-tested.** MIDI sequencer with 3.5 in disk drive. Not tested at VEMIA apart from switching on, checking tempo and some displays, but originally in working order and described by the owner as a brilliant live/studio hardware sequencer. The Near 6902 Yamaha QX5 / FD STOP /CONTINUE and START buttons have had their legend worn off. **Comes with original user manual (English / 1 Uk 35 GBP Hardware Sequencer good French /German) in 6/10 cosmetic condition. ** Packing £3. **UNSOLD IN PREVIOUS AUCTION, NOT RECENTLY TESTED, SO SOLD AS IS!** One-owner, good condition pair of angled rack strips to make a 10U rack at angle of about 70 degrees. With 16 Pair of rack strips & nuts & Very 7068 Unknown caged nuts and 13 bolts, each with a rack ear protector. Packing at VEMIA 3GBP - or delivery if possible would be 1 Uk 15 GBP Furniture bolts good easier! NEW LOW START PRICE! A sealed padded envelope from Kenton containing the MIDI kit for an Oberheim DMX 110 7102 Kenton MIDI kit for Oberheim DMX Mint 1 Uk MIDI Interface drum machine. Their serial number is 4241. This comes from a synth collector who bought large numbers of kits 'just GBP in case' but didn't always get round to having them fitted. Because this is a kit that needs fitting by a competent engineer, and cannot be tested here, it is sold in the belief that it is perfect and complete, but as is, with no returns, unless *on opening it* you find that there is a part missing or broken. It looks like this kit is discontinued by Kenton. Opened, but looking complete (and actually with a mystery transformer included, which doesn't seem to be part of the original kit), the Kenton MIDI kit for The Odyssey Mk II (or 1 1/2, as they also describe it). Kenton serial number 4242. Please make sure it is the right kit for your machine. This comes from a synth collector who bought large 125 7103 Kenton MIDI kit for Odyssey mk II numbers of kits 'just in case' but didn't always get round to having them fitted. Because this is a kit that needs fitting Mint 1 Uk MIDI Interface GBP by a competent engineer, and cannot be tested here, it is sold in the belief that it is perfect and complete, but as is, with no returns, unless *on opening it* you find that there is a part missing or broken. It looks like this kit is discontinued by Kenton. This is just the board (see photo) for a Kenton MIDI retrofit for what they describe as a Linndrum Mk 2 / 3. With original instructions, but obviously not the complete MIDI kit. This comes from a synth collector who bought large MIDI board for Linndrum numbers of kits 'just in case' but didn't always get round to having them fitted. Because this needs fitting by a 7105 Kenton Mint 1 Uk 45 GBP MIDI Interface mk 2 / 3 competent engineer, and cannot be tested here, it is sold in the belief that it is perfect and complete, but as is, with no returns, unless *on opening it* you find that there is a part missing or broken. It looks like this kit is discontinued by Kenton. Sealed padded envelope containing a Kenton MIDI kit for the ARP Odyssey mk II / '1 1/2' - Kenton's mk III. Serial number 4275. This comes from a synth collector who bought large numbers of kits 'just in case' but didn't always get MIDI kit for ARP Odyssey 161 7106 Kenton round to having them fitted. Because this is a kit that needs fitting by a competent engineer, and cannot be tested Mint 1 Uk MIDI Interface mk 2 GBP here, it is sold in the belief that it is perfect and complete, but as is, with no returns, unless *on opening it* you find that there is a part missing or broken.