Retail Price Listv2.0
Total Page:16
File Type:pdf, Size:1020Kb
Retail Price List V2.0 Quicke Versa-XSeries - Mid-range Loaders ~ Oringinal Implements 2016 CONTENTS Page Recommendations Page User Guide B1 Counterweight and Bucket Recommendations C1 Specification Versa-X Series B2 Implement – Loader Recommendations C2 Loader Info and Prices B3 Implements Page Hydraulic info, Subframe Codes, Types and Widths B4 Buckets – H, HT, HD, HV, HDV C3 LCS ErgoDrive, EasyDrive, ElectroDrive and Options B5 Special Buckets – C4 Loader Options and Hydraulic Conversion Kits B6 Multipurpose (4 in 1), Hy-Tipping, Grading and Precision Adapters and Tool Carrier Options B7 Bucket Grabs – C5 Tractor Make Subframe Page Multibenne, Powergrab SE, Powergrab BOH Case IH DM and US B8 Forks and Grabs – C6 Claas DM and US B9 Manure fork, Silograb, Silocut SGII and Maxi Grapple Deutz DM B10 Bale Handling – Round bale handling & Square bale handler C7 Fendt DM B11 Square bale forks (fixed and hinged), C8 Fiat US B12 Lifting – Pallet Forks, Ford US B12 Lifting – Big Bag Lifter, Single, Dual and Triple Bag John Deere DM and US B13 Other Implements – C9 Kioti DM B14 3 Point Linkage Hitch, Stone Fork, Silo Split Kubota DM B15 Skidsteer Implements – C10 Landini DM and US B16 Buckets, Bales Spikes, Pallet Forks and Weld On Hooks Massey Ferguson DM and US B17 Hook Types - Loader C11 McCormick DM B18 Euro, Alo Type 3, Trima and MX Hooks (including dimensions) New Holland DM B19 Hook Types - Telehandler Same DM B20 Claas Scorpion, JCB Q-Fit, Manitou, Matbro Pin and Cone, C12 TYM DM B21 Merlo, Volvo Large BM Valtra DM B22 Zetor DM B24 Other Info Page Helpful Information C11 Belarus, Hurlimann, Lamborghini, Older Weights of Material Chart, Conversion Charts Contact Alo UK Renault, Steyr and Ursus Contact Info, Carriage Charges and important info Inside back A guide to using this dealer price list Please read this information carefully This price list has been designed to ensure choosing a Quicke® Versa-X loader and Original Implement™ and correctly matching them to the tractor in a simple operation. Use the following guidelines to assist you… Loaders AgLine Choose a loader compatible to your requirements from the specification sheet on page 2 and 3 of the 1 Choose the implement you require price list. Use the recommendatiins as a guide to chose to correct implement for you tractor 2 Select the appropriate price sheet for the tractor to which the loader is to be fitted. Select the tractor model from the left-hand column and the loader model along the top row of the sheet. If Ordering Information there is a price specified at the intersection of the column and row, this is a recommended match for the Take down the Model and type of implement you require tractor and loader. 1 Four other possibilities should be noted here… Model example - Silograb 170 (170 = 1.70m wide) a. No price specified Not a recommended match 2 Make and Model of front loader or handler for some AgLine implements b. Black Intersection The loader will NOT fit the tractor. 3 Type of hook system required c. Shaded Intersection 8,150 US subframes available only 4 Note the discount code A or B and retail price d. Loader format not available US subframes only 5 Email your order to your area manager or to [email protected]. The price specified at the intersection comprises of the following components: Ensure the implement is right for your machine Ensure you check that your implement selection is recommended for your loader or the Non parallel Loader. work to carry out. Price includes Euro tool carrier, mechanical latching, factory fit 3rd service. Parallel Loader. Price includes Euro implement carrier, mechanical latching and factory fit 3rd service . Subframe. (Also refer to page B4) Short subframes (price code DS or DM) usually mount from the front bolster of the tractor to the front of the transmission. 2nd year warranty on Silocut SG covers structure only and does not include any wearing Long subframes (price code DSX or DMX) run the entire length of the tractor, to the rear axle. part(s) or hydraulic components. Tractor front grille-guards (if applicable) are included in the price. Some ‘DMX’ subframes are priced as ‘DM’. 1 Only use the recommendations in this price list. Occasionally additional items (e.g. Exhaust elbows, Power beyond plates etc) may also be required but not necessarily specified; therefore it is important to check with our sales office before calculating Alo UK will not accept any responsibility if damage or failure occurs as a consequence or an the final price. On some occasions, it may be necessary to obtain optional parts from the tractor 2 incorrect implement to tractor/telehandler combination. I.E. Implement too large for manufacturer. loader/handler, .loader/handler is too large for implement When a shaded intersection is shown, a US subframe is used The Machinery Directive 2006/42/EC applies to all material handling machinery and Hydraulic Valves should be interpreted in conjunction with all ROPS (Roll Over Protection Structure) and ErgoDrive LCS mono-lever control valve comes in either Open Centre (OC) or Load Sensing (LS) 3 *FOPS (Falling Object Protection Structure) to ensure operator protection. Please configuration. familiarise yourself with Machinery Directive 2006/42/EC. EasyDrive LCS Code “EY” (EasyDrive) is also available or upgrade to ElectroDrive LCS Pro. *Do not mount a non-parallel loader to a tractor without FOPS* Hose kit options may also be available for you tractor. Rear counterweight must be used with front loaders in accordance with regulation EN Note – a conversion kit may be required depending on loader/hydraulic combination 4 Finally, choose from our large selection of implements at the rear of the price list. 12525 (See page C 1) Should you wish to discuss your choice in more detail, please contact your local Alo UK Area Manager (phone numbers are in the inside back cover) or contact the Alo UK Sales Office direct on 01299 250922, Fax 01299 250944, E-mail: [email protected] Alo UK price list covers all UK markets excluding Northern Ireland. All prices are in Pounds Sterling. All prices are excluding VAT. We hold a policy of continuous improvement. We reserve the right to change product specification and prices at any time without prior notice. B1 Versa-X Series Loader Specification NON PARALLEL PARALLEL Loader Model X21 X31 X41 X51 X26 X36 X46 X56 Standard equipment → Euro tool carrier and 3rd Service Euro tool carrier and 3rd Service Tractor size 40-60 50-70 60-90 70-120 40-60 50-70 60-90 70-120 Lift height to pivot pin m 3.10 3.40 3.70 3.90 3.10 3.40 3.70 3.90 Lift height under level bucket m 2.86 3.16 3.46 3.66 2.86 3.16 3.46 3.66 Lift capacity max lift height 80 cm from pivot pin Kg 870 970 1010 1080 1220 1520 1590 1680 Lift capacity 1,5 m lift height 80 cm from pivot pin Kg 1210 1370 1520 1670 1400 1560 1710 1890 Breakout force 80 cm from pivot pin Kg 1450 1600 1770 1960 1580 1660 1850 2080 Lift capacity max lift height at pivot pin Kg 1530 1700 1800 1890 1240 1410 1510 1600 Lift capacity 1,5 m lift height at pivot pin Kg 1840 2030 2220 2390 1500 1690 1870 2040 Breakout force from pivot pin Kg 2360 2510 2730 2940 1950 2100 2320 2520 Max tear-out force 1,5 m lift height 800 mm out from pivot pin 1930 1980 2460 2950 1560 1970 2440 2930 Rollback angle (degrees) Min 42 44 42 43 42 44 42 43 Dump angle (degrees) Min 50 50 49 46 50 50 49 46 Lifting time to max lift height at 60 l/min Sec 4.1 4.8 4.1 4.7 3.5 3.1 3.6 3.6 Parallel device No Yes Series Series 3rd service Yes Yes Softdrive No No Loader to subframe securing system Deluxe Locking handle pin Deluxe Locking handle pin Kg Loader weight 310 335 360 390 360 390 420 445 Versa-X Subframe type loader will mount to DM DM/US DM/US DM/US DM DM/US DM/US DM/US Quicke Versa-XSeries The new Versa-X loader series A Versatile Mid-Range Loader! Our new product program addressing the small to mid-size tractor range. 8 loader models recommended for tractors from 40 to 110 hp Loaders designed to fit on to the Delta subframe system and LCS hydraulic system ErgoDrive Best visibility in its class Version with US bearing box available for used tractor market (not available on X21 and X26) Non Parallel Parallel X21 £2,550 X26 £3,350 X31 £2,850 X36 £3,650 X41 £3,350 X46 £4,150 X51 £4,250 X56 £5,050 Standard Equipment Euro Tool Carrier only 3rd service valve (if 3rd service is not required, deduct £250) Deluxe Subframe Locking Cable operated valve (ErgoDrive) Subframe (Delta or US) When purchased as a package to mount to tractor Euro Combi 8 + 5 tool carrier available - £200 Alternative Skidsteer tool carrier available - Factory Some Versa-X features at a glance Deluxe locking Protected 3rd service Excellent visibility Great hitching visibility Curved parallel rod Low cross-tube B 3 Hydraulic Data. Subframe Types Open Centre Hydraulic System Delta Subframe DM and DMX Normally, manufacturers specified values are A. 60mm Subframe saddle close to loader beam pivot point. obtained at a hydraulic oil pressure of 185 bars with a flow rate of 60 litres per minute.