This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI Standards Approval Records

Listed below are all ANSI approval records as of September 6, 2019. Many of these ANSI approved standards that are published are available in electronic format (PDF) via ANSI's Electronic Standards Store (ESS) at http://webstore.ansi.org.

3-A (3-A SANITARY STANDARDS, INC.) AAFS (AMERICAN ACADEMY OF FORENSIC ANSI/ASB Std 022-2019, Standard for Forensic SCIENCES) DNA Analysis Training Programs ANSI/3A 00-01-2018, 3-A Sanitary Standard for Approved: 7/26/2019 General Requirements ANSI/ASB Best Practice Recommendation 010 Document will be provided electronically on AAFS Approved: 2/1/2018 -2018, Forensic Anthropology in Disaster Standards Board website free of charge. Eric Schweitzer, (703) 790-0295, [email protected] Victim Identification: Best Practice Recommendations for the Medicolegal ANSI/ASB Std 028-2019, Wildlife Forensics AA (ASC H35) (ALUMINUM ASSOCIATION) Authority Morphology Standard Approved: 10/4/2018 Approved: 5/3/2019 ANSI H35.1/H35.1(M)-2017, Standard Alloy and Temper Designation Systems for Aluminum Document will be provided electronically on AAFS Document will be provided electronically on AAFS Standards Board website free of charge. Standards Board website free of charge. Approved: 11/14/2017 Francesca Licari - [email protected] ANSI/ASB Std 006-2019, Best Practice ANSI/ASB Std 029-2019, Report Writing in Recommendation for DNA Analysis for Wildlife Forensics: Morphology and Genetics ANSI H35.2-2017, Standard Dimensional Human Identification in Mass Fatality Approved: 5/3/2019 Tolerances for Aluminum Mill Products Incidents Document will be provided electronically on AAFS Approved: 11/14/2017 Approved: 2/5/2019 Standards Board website free of charge. Francesca Licari - [email protected] Document will be provided electronically on AAFS Standards Board website free of charge. ANSI/ASB Std 037-2019, Guidelines for Opinions ANSI H35.2M-2017, Standard Dimensional and Testimony in Forensic Toxicology Tolerances for Aluminum Mill Products ANSI/ASB Std 007-2018, Postmortem Approved: 1/18/2019 Approved: 11/14/2017 Impression Submission Strategy for Document will be provided electronically on AAFS Francesca Licari - [email protected] Comprehensive Searches of Essential Standards Board website free of charge. Automated Fingerprint Identification System ANSI H35.3-2017, Standard Designation System Databases ANSI/ASB Std 045-2019, Standard for Stature for Aluminum Hardeners Approved: 5/17/2018 Estimation in Forensic Anthropology Approved: 11/14/2017 Document will be provided electronically on AAFS Approved: 2/8/2019 Francesca Licari - [email protected] Standards Board website free of charge. Document will be provided electronically on AAFS Standards Board website free of charge. ANSI H35.4-2017, Standard Designation System ANSI/ASB Std 009-2019, Examination Of Human for Unalloyed Aluminum Remains By Forensic Pathologists In The ANSI/ASB Std 046-2019, Wildlife Forensics Approved: 11/14/2017 Disaster Victim Identification Context Validation Standards-- STR Analysis Francesca Licari - [email protected] Approved: 2/5/2019 Approved: 5/3/2019 Document will be provided electronically on AAFS Document will be provided electronically on AAFS ANSI H35.5-2013 (R2017), Standard Standards Board website free of charge. Standards Board website free of charge. Nomenclature System for Aluminum Metal Matrix Composite Matierals ANSI/ASB Std 017-2018, Standard Practices for ANSI/ASB Std 047-2019, Wildlife Forensics Approved: 11/14/2017 Measurement Traceability in Forensic Validation Standard Validating New Primers Francesca Licari - [email protected] Toxicology for Sequencing Approved: 6/13/2018 Approved: 5/3/2019 AABC (ASSOCIATED AIR BALANCE Document will be provided electronically on AAFS Document will be provided electronically on AAFS COUNCIL) Standards Board website free of charge. Standards Board website free of charge.

ANSI/AABC MN-1-2016, AABC National ANSI/ASB Std 019-2019, Wildlife Forensics ANSI/ASB Std 048-2019, Wildlife Forensic DNA Standards for Total System Balance, 7th General Standards Standard Procedures Edition Approved: 5/3/2019 Approved: 5/3/2019 Approved: 12/4/2015 Document will be provided electronically on AAFS Document will be provided electronically on AAFS [email protected] Standards Board website free of charge. Standards Board website free of charge.

ANSI/ASB Std 020-2018, Standards for ANSI/ASB Std 072-2019, Standards for the Validation Studies of DNA Mixtures for the Validation of Procedures in Bloodstain Development and Verification of a Pattern Analysis Laboratory Mixture Interpretation Protocol Approved: 5/3/2019 Approved: 9/11/2018 Document will be provided electronically on AAFS Document will be provided electronically on AAFS Standards Board website free of charge. Standards Board website free of charge.

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 1 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

AAMI (ASSOCIATION FOR THE ANSI/AAMI BF7-2012, Blood transfusion ANSI/AAMI HA60601-1-11-2015, Medical ADVANCEMENT OF MEDICAL microfilters electrical equipment - Part 1-11: General INSTRUMENTATION) Approved: 11/30/2012 requirements for basic safety and essential AAMI performance - Collateral Standard: ANSI/AAM/IEC 60601-1-2-2014, Medical Requirements for medical electrical electrical equipment - Part 1-2: General ANSI/AAMI BP22-1994 (R2016), Blood pressure equipment and medical electrical systems requirements for basic safety and essential transducers used in the home healthcare environment performance - Collateral standard: Approved: 1/6/2017 Approved: 8/25/2015 Electromagnetic disturbances - Requirements AAMI AAMI and tests Approved: 5/8/2014 ANSI/AAMI CI86-2017, Cochlear Implant ANSI/AAMI HE75-2009 (R2018), Human factors AAMI Systems: Requirements for Safety, Functional engineering - Design of medical devices Verification, Labeling and Reliability Approved: 8/10/2018 ANSI/AAMI 11663-2014, Quality of dialysis fluid Reporting AAMI for haemodialysis and related therapies Approved: 1/6/2017 Approved: 8/8/2014 AAMI ANSI/AAMI ID54-1996 (R2012), Enteral feeding AAMI set adapters and connectors ANSI/AAMI EC12-2010 (R2015), Disposable ECG Approved: 1/17/2012 ANSI/AAMI 13958-2014, Concentrates for electrodes AAMI haemodialysis and related therapies Approved: 12/30/2015 Approved: 8/15/2014 AAMI ANSI/AAMI NS28-1988 (R2015), Intracranial AAMI pressure monitoring devices ANSI/AAMI EC53-2013, ECG trunk cables and Approved: 8/31/2015 ANSI/AAMI 13959-2014, Water for patient leadwires AAMI haemodialysis and related therapies Approved: 11/19/2013 Approved: 8/15/2014 AAMI ANSI/AAMI NS4-2013 (R2017), Transcutaneous AAMI electrical nerve stimulators ANSI/AAMI EC57-2012, Testing and reporting Approved: 11/8/2017 ANSI/AAMI 23500-2014, Guidance for the performance results of cardiac rhythm and ST AAMI preparation and quality management of segment measurement algorithms fluids for haemodialysis and related therapies Approved: 12/18/2012 ANSI/AAMI PB70-2012, Liquid barrier Approved: 8/15/2014 AAMI performance and classification of protective AAMI apparel and drapes intended for use in health ANSI/AAMI EQ56-2013, Recommended practice care facilities ANSI/AAMI 26722-2014, Water treatment for a medical equipment management Approved: 6/21/2012 equipment for haemodialysis applications program AAMI and related therapies Approved: 3/13/2013 Approved: 8/8/2014 AAMI ANSI/AAMI RD47-2008 (R2013), Reprocessing AAMI of hemodialyzers ANSI/AAMI EQ89-2015, Guidance for the use of Approved: 10/4/2013 ANSI/AAMI 2700-1-2019, Medical Devices and medical equipment maintenance strategies AAMI Medical Systems — Essential safety and procedures requirements for equipment comprising the Approved: 2/12/2015 ANSI/AAMI ST15883-1-2009/A1-2014, Washer- patient-centric integrated clinical AAMI disinfectors - Part 1: General requirements, environment (ICE) — Part 1: General terms and definitions and tests - Amendment requirements and conceptual model ANSI/AAMI EQ93-2019, Medical equipment 1 Approved: 7/29/2019 management - Vocabulary used in medical Approved: 7/17/2014 AAMI equipment programs AAMI Approved: 4/18/2019 ANSI/AAMI AT6-2013, Autologous transfusion AAMI ANSI/AAMI ST15883-1-2009/A2-2012, Washer- devices disinfectors - Part 1: General requirements, Approved: 8/27/2013 ANSI/AAMI ES60601-1-2005 C1-2009 and A2 terms and definitions and tests, Amendment AAMI (R2012), Medical electrical equipment - Part 2 1: General requirements for basic safety and Approved: 8/23/2012 ANSI/AAMI BE83-2006 (R2011), Biological essential performance AAMI evaluation of medical devices - Part 18: Approved: 1/17/2012 Chemical characterization of materials AAMI ANSI/AAMI ST15883-2-2013 (ISO 15883-2-2006 Approved: 12/2/2011 MOD)-2013 (R2015), Washer-disinfectors, AAMI ANSI/AAMI ES60601-1-2005, A1-2012, Medical Part 2: Requirements and tests for washer- electrical equipment - Part 1: General disinfectors employing thermal disinfection ANSI/AAMI BF64-2012, Leukocyte reduction requirements for basic safety and essential for surgical instruments, anaesthetic filters performance Amendment 1 equipment, bowls, dishes, receivers, utensils, Approved: 11/29/2012 Approved: 8/21/2012 glassware, etc AAMI AAMI Approved: 11/23/2015 AAMI

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 2 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/AAMI ST15883-3-2012 (ISO 15883-3-2006) ANSI/AAMI ST77-2013 (R2018), Containment ANSI/AAMI ST79-2010/A3.6-2012, MOD-2012 (R2015), Washer-disinfectors, devices for reusable medical device Comprehensive guide to steam sterilization Part 3: Requirements and tests for washer- sterilization and sterility assurance in health care facilities disinfectors employing thermal disinfection Approved: 9/6/2018 Approved: 8/23/2012 for human waste containers AAMI AAMI Approved: 11/23/2015 AAMI ANSI/AAMI ST79-2017, Comprehensive guide to ANSI/AAMI ST79-2010/A3.7-2012, steam sterilization and sterility assurance in Comprehensive guide to steam sterilization ANSI/AAMI ST24-1999 (R2018), Automatic, health care facilities and sterility assurance in health care facilities general-purpose ethylene oxide sterilizers Approved: 7/18/2017 Approved: 8/23/2012 and ethylene oxide sterilant sources intended AAMI AAMI for use in health care facilities Approved: 9/6/2018 ANSI/AAMI ST79-2010/A2.1-2011, ANSI/AAMI ST79-2010/A4.1-2013, AAMI Comprehensive guide to steam sterilization Comprehensive guide to steam sterilization and sterility assurance in health care facilities and sterility assurance in health care facilities ANSI/AAMI ST40-2004 (R2018), Table-top dry Approved: 8/8/2011 Approved: 10/14/2013 heat (heated air) sterilization and sterility AAMI AAMI assurance in health care facilities Approved: 1/12/2018 ANSI/AAMI ST79-2010/A2.2-2011, ANSI/AAMI ST79-2010/A4.2-2013, AAMI Comprehensive guide to steam sterilization Comprehensive guide to steam sterilization and sterility assurance in health care facilities and sterility assurance in health care facilities ANSI/AAMI ST41-2008 (R2018), Ethylene oxide Approved: 8/8/2011 Approved: 10/14/2013 sterilization in health care facilities: Safety AAMI AAMI and effectiveness Approved: 1/16/2018 ANSI/AAMI ST79-2010/A2.3-2011, ANSI/AAMI ST8-2013 (R2018), Hospital steam AAMI Comprehensive guide to steam sterilization sterilizers and sterility assurance in health care facilities Approved: 8/17/2018 ANSI/AAMI ST50-2004 (R2018), Dry heat Approved: 8/8/2011 AAMI (heated air) sterilizers AAMI Approved: 1/12/2018 ANSI/AAMI ST90-2017, Processing of health AAMI ANSI/AAMI ST79-2010/A2.5-2011, care products - Quality management systems Comprehensive guide to steam sterilization for processing in health care facilities ANSI/AAMI ST55-2016, Table-top steam and sterility assurance in health care facilities Approved: 7/18/2017 sterilizers Approved: 9/19/2011 AAMI Approved: 11/1/2016 AAMI AAMI ANSI/AAMI ST91-2015, Flexible and semi-rigid ANSI/AAMI ST79-2010/A3.1-2012, endoscope reprocessing in health care ANSI/AAMI ST58-2013 (R2018), Chemical Comprehensive guide to steam sterilization facilities sterilization and high-level disinfection in and sterility assurance in health care facilities Approved: 4/8/2015 health care facilities Approved: 8/22/2012 AAMI Approved: 9/6/2018 AAMI AAMI ANSI/AAMI SW91-2018, Classification of ANSI/AAMI ST79-2010/A3.2-2012, Defects in Health Software ANSI/AAMI ST65-2008 (R2018), Processing of Comprehensive guide to steam sterilization Approved: 10/22/2018 reusable surgical textiles for use in health and sterility assurance in health care facilities AAMI care facilities Approved: 8/23/2012 Approved: 9/6/2018 AAMI ANSI/AAMI/IEC 60601-1-12-2016, Medical AAMI electrical equipment -Part 1-12: General ANSI/AAMI ST79-2010/A3.3-2012, requirements for basic safety and essential ANSI/AAMI ST67-2019, Sterilization of health Comprehensive guide to steam sterilization performance - Collateral Standard: care products - Requirements and guidance and sterility assurance in health care facilities Requirements for medical electrical for selecting a sterility assurance level (SAL) Approved: 8/23/2012 equipment and medical electrical systems for products labeled sterile AAMI intended for use in the emergency medical Approved: 7/29/2019 services environment AAMI ANSI/AAMI ST79-2010/A3.4-2012, Approved: 10/6/2016 Comprehensive guide to steam sterilization AAMI ANSI/AAMI ST72-2011 (R2016), Bacterial and sterility assurance in health care facilities endotoxin - Test methods, routine Approved: 8/23/2012 monitoring and alternatives to batch testing AAMI Approved: 6/9/2016 AAMI ANSI/AAMI ST79-2010/A3.5-2012, Comprehensive guide to steam sterilization and sterility assurance in health care facilities Approved: 8/23/2012 AAMI

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 3 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/AAMI/IEC 60601-1-8-2013, Medical ANSI/AAMI/IEC 60601-2-21-2009 (R2014), ANSI/AAMI/IEC 60601-2-50/A1-2016, Medical electrical equipment - Part 1-8: General Medical electrical equipment - Part 2-21: electrical equipment - Part 2-50: Particular requirements for basic safety and essential Particular requirements for the basic safety requirements for the basic safety and performance - Collateral Standard: General and essential performance of infant radiant essential performance of infant phototherapy requirements, tests and guidance for alarm warmers equipment, Amendment 1 systems in medical electrical equipment and Approved: 12/10/2014 Approved: 11/10/2016 medical electrical systems AAMI AAMI Approved: 10/21/2013 AAMI ANSI/AAMI/IEC 60601-2-21/A1-2016, Medical ANSI/AAMI/IEC 62304-2006/Amd 1-2016, electrical equipment - Part 2-21: Particular Medical device software - Software life cycle ANSI/AAMI/IEC 60601-2-16, Ed. 4-2012, requirements for the basic safety and processes, Amendment 1 Medical electrical equipment - Part 2-16: essential performance of infant radiant Approved: 4/7/2016 Particular requirements for basic safety and warmers, Amendment 1 AAMI essential performance of haemodialysis, Approved: 11/10/2016 haemodiafiltration and haemofiltration AAMI ANSI/AAMI/IEC 62366-1-2015, Medical devices equipment - Application of usability Engineering to Approved: 9/5/2012 ANSI/AAMI/IEC 60601-2-25-2011 (R2016), medical devices AAMI Medical electrical equipment - Part 2-25: Approved: 2/23/2015 Particular requirements for the basic safety AAMI ANSI/AAMI/IEC 60601-2-19-2009 (R2014), and essential performance of Medical electrical equipment - Part 2-19: electrocardiographs ANSI/AAMI/IEC 80001-1-2010, Application of Particular requirements for the basic safety Approved: 1/6/2017 for IT Networks and essential performance of infant AAMI incorporating medical devices - Part 1: Roles, incubators responsibilities and activities Approved: 12/16/2014 ANSI/AAMI/IEC 60601-2-27-2011 (R2016), Approved: 10/6/2010 AAMI Medical electrical equipment - Part 2-27: AAMI Particular requirements for the basic safety ANSI/AAMI/IEC 60601-2-19/A1-2016, Medical and essential performance of ANSI/AAMI/IEC 80601-2-30-2009, Medical electrical equipment - Part 2-19: Particular electrocardiographic monitoring equipment electrical equipment - Part 2-30: Particular requirements for the basic safety and Approved: 1/6/2017 requirements for the basic safety and essential performance of infant incubators, AAMI essential performance of automated non- Amendment 1 invasive sphygmomanometers Approved: 11/10/2016 ANSI/AAMI/IEC 60601-2-4-2010 (R2015), Approved: 7/24/2009 AAMI Medical electrical equipment - Part 2-4: AAMI Particular requirements for the basic safety ANSI/AAMI/IEC 60601-2-2-2017, Medical and essential performance of cardiac ANSI/AAMI/IEC 80601-2-30-2018, Medical electrical equipment - Part 2-2: Particular defibrillators electrical equipment - Part 2-30: Particular requirements for the basic safety and Approved: 12/30/2015 requirements for the basic safety and essential performance of high frequency AAMI essential performance of automated non- surgical equipment and high frequency invasive sphygmomanometers surgical accessories ANSI/AAMI/IEC 60601-2-4/A1-2018, Medical Approved: 1/11/2019 Approved: 6/30/2017 electrical equipment - Part 2-4: Particular AAMI AAMI requirements for the basic safety and essential performance of cardiac ANSI/AAMI/IEC 80601-2-30-2009/C1-2009, ANSI/AAMI/IEC 60601-2-20-2009 (R2014), defibrillators Amendment 1 Medical electrical equipment - Part 2-30: Medical electrical equipment - Part 2-20: Approved: 1/11/2019 Particular requirements for basic safety and Particular requirements for the basic safety AAMI essential performance of automated type and essential performance of infant transport non-invasive sphygmomanometers incubators ANSI/AAMI/IEC 60601-2-47-2012 (R2016), Approved: 12/10/2009 Approved: 12/10/2014 Medical electrical equipment – Part 2-47: AAMI AAMI Particular requirements for the basic safety and essential performance of ambulatory ANSI/AAMI/IEC 80601-2-30-2009/A1-2013 ANSI/AAMI/IEC 60601-2-20/A1-2016, Medical electrocardiographic systems. (R2017), Medical electrical equipment - Part electrical equipment - Part 2-20: Particular Approved: 1/6/2017 2-30: Particular requirements for the basic requirements for the basic safety and AAMI safety and essential performance of essential performance of transport infant automated type non-invasive incubators, Amendment 1 ANSI/AAMI/IEC 60601-2-50-2009 (R2014), sphygmomanometers - Amendment 1 Approved: 11/10/2016 Medical electrical equipment - Part 2-50: Approved: 1/10/2017 AAMI Particular requirements for the basic safety AAMI and essential performance of infant phototherapy equipment Approved: 12/16/2014 AAMI

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 4 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/AAMI/IEC 80601-2-58-2014, Medical ANSI/AAMI/ISO 10993-3-2014, Biological ANSI/AAMI/ISO 11137-1/Amd2-2019, electrical equipment - Part 2-58: Particular evaluation of medical devices - Part 3: Tests Sterilization of health care products -- requirements for the basic safety and for genotoxicity, carcinogenicity and Radiation -- Part 1: Requirements for essential performance of lens removal reproductive toxicity development, validation and routine control devices and vitrectomy devices for Approved: 8/14/2014 of a sterilization process for medical devices ophthalmic surgery AAMI -- Amendment 2: Revision to 4.3.4 and 11.2 Approved: 9/10/2014 Approved: 5/1/2019 AAMI ANSI/AAMI/ISO 10993-4:2002 (R2013), AAMI Biological evaluation of medical devices - Part ANSI/AAMI/IEC 80601-2-58-2014/A1-2016, 4: Selection of tests for interactions with ANSI/AAMI/ISO 11137-2, third edition-2013 Medical electrical equipment - Part 2-58: blood (R2019), Sterilization of health care products Particular requirements for the basic safety Approved: 11/26/2013 -- Radiation -- Part 2: Establishing the and essential performance of lens removal AAMI sterilization dose and vitrectomy devices for ophthalmic Approved: 5/1/2019 surgery (Amendment 1) ANSI/AAMI/ISO 10993-5-2009 (R2014), AAMI Approved: 12/27/2016 Biological evaluation of medical devices - Part AAMI 5: Tests for in vitro cytotoxicity ANSI/AAMI/ISO 11137-3-2017, Sterilization of Approved: 2/6/2014 health care products - Radiation - Part 3: ANSI/AAMI/ISO 10993-10:2010 (R2014), AAMI Guidance on dosimetric aspects of Biological evaluation of medical devices - Part development, validation and routine control 10: Tests for irritation and skin sensitization ANSI/AAMI/ISO 10993-6-2017, Biological Approved: 10/6/2017 Approved: 10/8/2014 evaluation of medical devices -- Part 6: Tests AAMI AAMI for local effects after implantation Approved: 1/10/2017 ANSI/AAMI/ISO 11138-1-2017, Sterilization of ANSI/AAMI/ISO 10993-12-2012, Biological AAMI health care products - Biological indicators - evaluation of medical devices - Part 12: Part 1: General requirements Sample preparation and reference materials ANSI/AAMI/ISO 10993-7-2008 (R2012), Approved: 8/1/2017 Approved: 7/26/2012 Biological evaluation of medical devices - Part AAMI AAMI 7: Ethylene oxide sterilization residuals Approved: 6/1/2012 ANSI/AAMI/ISO 11138-2-2017, Sterilization of ANSI/AAMI/ISO 10993-13-2010 (R2014), AAMI health care products - Biological indicators - Biological evaluation of medical devices - Part Part 2: Biological indicators for ethylene 13: Identification and quantification of ANSI/AAMI/ISO 10993-9-1999 (R2014), oxide sterilization processes degradation products from polymeric Biological evaluation of medical devices - Part Approved: 8/1/2017 medical devices 9: Framework for identification and AAMI Approved: 10/8/2014 quantification of potential degradation AAMI products ANSI/AAMI/ISO 11138-3-2017, Sterilization of Approved: 9/23/2014 health care products - Biological indicators - ANSI/AAMI/ISO 10993-14-2001 (R2011), AAMI Part 3: Biological indicators for moist heat Biological evaluation of medical devices - Part sterilization processes 14: Identification and quantification of ANSI/AAMI/ISO 11135-2015, Sterilization of Approved: 8/1/2017 degradation products from ceramics health care products - Ethylene oxide - AAMI Approved: 11/16/2011 Requirements for the development, AAMI validation and routine control of a ANSI/AAMI/ISO 11138-4-2017, Sterilization of sterilization process for medical devices health care products - Biological indicators - ANSI/AAMI/ISO 10993-15-2000 (R2011), Approved: 7/27/2015 Part 4: Biological indicators for dry heat Biological evaluation of medical devices - Part AAMI sterilization processes 15: Identification and quantification of Approved: 8/1/2017 degradation products from metals and alloys ANSI/AAMI/ISO 11137-1-2006 (R2015), AAMI Approved: 11/16/2011 Sterilization of health care products - AAMI Radiation - Part 1: Requirements for ANSI/AAMI/ISO 11138-5-2017, Sterilization of development, validation and routine control health care products - Biological indicators - ANSI/AAMI/ISO 10993-17-2002 (R2012), of a sterilization process for medical devices Part 5: Biological indicators for low- Biological evaluation of medical devices - Part Approved: 10/6/2015 temperature steam and formaldehyde 17: Establishment of allowable limits for AAMI sterilization processes leachable substances Approved: 8/1/2017 Approved: 11/30/2012 ANSI/AAMI/ISO 11137-1:2006/Amd 1-2013, AAMI AAMI Sterilization of health care products - Radiation - Part 1: Requirements for ANSI/AAMI/ISO 11140-1-2014, Sterilization of ANSI/AAMI/ISO 10993-2-2006 (R2014), development, validation and routine control health care products - Chemical indicators - Biological evaluation of medical devices - Part of a sterilization process for medical devices - Part 1: General requirements 2: Animal welfare requirements Amendment 1 Approved: 9/10/2014 Approved: 10/8/2014 Approved: 12/30/2013 AAMI AAMI AAMI

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 5 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/AAMI/ISO 11140-3-2012 (R2015), ANSI/AAMI/ISO 11607-2-2006,A1-2014 ANSI/AAMI/ISO 13408-3-2012 (R2015), Aseptic Sterilization Of Health Care Products - (R2015), Packaging for terminally sterilized processing of health care products - Part 3: Chemical Indicators - Part 3: Class 2 medical devices - Part 2: Validation Lyophilization Indicator Systems For Use In The Bowie And requirements for forming, sealing and Approved: 7/13/2015 Dick-Type Steam Penetration Test assembly processes AAMI Approved: 11/10/2015 Approved: 2/11/2016 AAMI AAMI ANSI/AAMI/ISO 13408-4-2005 (R2014), Aseptic processing of health care products - Part 4: ANSI/AAMI/ISO 11140-4-2012 (R2015), ANSI/AAMI/ISO 11658-2012, Cardiovascular Clean-in-place technologies Sterilization Of Health Care Products - implants and extracorporeal systems - Approved: 10/13/2014 Chemical Indicators - Part 4: Class 2 Blood/tissue contact surface modifications AAMI Indicators As An Alternative To Bowie And for extracorporeal perfusion systems Dick Test For Detection Of Steam Penetration Approved: 8/20/2012 ANSI/AAMI/ISO 13408-5-2012 (R2015), Aseptic Approved: 11/10/2015 AAMI processing of health care products - Part 5: AAMI Sterilization in place ANSI/AAMI/ISO 11737-1-2018, AAMI/ISO CDV-3 Approved: 8/3/2015 ANSI/AAMI/ISO 11140-5-2012 (R2015), 11737-1, Sterilization of health care products AAMI Sterilization of Health Care Products - - Microbiological methods - Part 1: Chemical Indicators - Part 5: Class 2 Determination of a population of ANSI/AAMI/ISO 13408-6-2005 (R2013), Aseptic Indicators for Bowie and Dick Air Removal microorganisms on product processing of health care products - Part 6: Test Sheets and Packs Approved: 1/24/2018 Isolator systems Approved: 11/10/2015 AAMI Approved: 11/26/2013 AAMI AAMI ANSI/AAMI/ISO 11737-2-2009 (R2014), ANSI/AAMI/ISO 11607-1-2019, Packaging for Sterilization of medical devices - ANSI/AAMI/ISO 13408-6-2005/A1-2013, Aseptic terminally sterilized medical devices - Part 1: Microbiological methods - Part 2: Tests of processing of health care products - Part 6: Requirements for materials, sterile barrier sterility performed in the definition, Isolator systems - Amendment 1 systems and packaging validation and maintenance of a sterilization Approved: 3/11/2013 Approved: 5/21/2019 process AAMI AAMI Approved: 10/13/2014 AAMI ANSI/AAMI/ISO 13408-7-2012 (R2018), Aseptic ANSI/AAMI/ISO 11607-1:2006, A1-2014, processing of health care products - Part 7: Amendment 1 to ANSI/AAMI/ISO 11607 ANSI/AAMI/ISO 12417-1-2015, Cardiovascular Alternative processes for atypical medical -1:2006, Packaging for terminally sterilized implants and extracorporeal systems - devices and combination products medical devices - Part 1: Requirements for Vascular device-drug combination products - Approved: 8/17/2018 materials, sterile barrier systems, and Part 1: General requirements AAMI packaging Approved: 11/16/2015 Approved: 9/10/2014 AAMI ANSI/AAMI/ISO 13485 (Ed.3)-2016, Medical AAMI devices - Quality management systems - ANSI/AAMI/ISO 13022-2012, Medical products Requirements for regulatory purposes ANSI/AAMI/ISO 11607-1-2006/A1-2014 containing viable human cells -- Application Approved: 6/8/2016 (R2015), Packaging for terminally sterilized of risk management and requirements for AAMI medical devices - Part 1: Requirements for processing practices materials, sterile barrier systems and Approved: 6/18/2012 ANSI/AAMI/ISO 14117-2012, Active implantable packaging AAMI medical devices - Electromagnetic Approved: 2/11/2016 compatibility - EMC test protocols for AAMI ANSI/AAMI/ISO 13408-1-2008 (R2011), Aseptic implantable cardiac pacemakers, implantable processing of health care products - Part 1: cardioverter defibrillators and cardiac ANSI/AAMI/ISO 11607-2-2019, Packaging for General requirements resynchronization devices terminally sterilized medical devices - Part 2: Approved: 12/14/2011 Approved: 11/30/2012 Validation requirements for forming, sealing AAMI AAMI and assembly processes Approved: 5/21/2019 ANSI/AAMI/ISO 13408-1-2008/A1-2013 ANSI/AAMI/ISO 14155-2010, Clinical AAMI (R2017), Aseptic processing of health care investigation of medical devices for human products - Part 1: General requirements subjects - Good clinical practice ANSI/AAMI/ISO 11607-2:2006, A1-2014, Approved: 5/18/2017 Approved: 12/30/2010 Amendment 1 to ANSI/AAMI/ISO 11607 AAMI AAMI -2:2006, Packaging for terminally sterilized medical devices - Part 2: Validation ANSI/AAMI/ISO 13408-2-2018, Aseptic ANSI/AAMI/ISO 14155-1-2003 (R2008), Clinical requirements for forming, sealing and processing of health care products - Part 2: investigation of medical devices for human assembly processes Sterilizing filtration subjects - Part 1: General requirements Approved: 9/10/2014 Approved: 2/1/2018 Approved: 12/19/2008 AAMI AAMI AAMI

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 6 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/AAMI/ISO 14155-2-2003 (R2008), Clinical ANSI/AAMI/ISO 14971-2019, Medical devices - ANSI/AAMI/ISO 16142-1-2016, Medical devices investigation of medical devices for human Application of risk management to medical - Recognized essential principles of safety subjects - Part 2: Clinical investigation plans devices and performance of medical devices - Part Approved: 12/19/2008 Approved: 5/10/2019 1: General essential principles and additional AAMI AAMI specific essential principles for all non-IVD medical devices and guidance on the ANSI/AAMI/ISO 14160-2011 (R2016), ANSI/AAMI/ISO 14971-2007 (Ed 2, vers 2) selection of standards Sterilization of health care products--Liquid (R2016), Medical devices - Risk management Approved: 7/7/2016 chemical sterilizing agents for single-use - Application of risk management to medical AAMI medical devices utilizing animal tissues and devices their derivatives--Requirements for Approved: 11/29/2016 ANSI/AAMI/ISO 16142-2-2017, Medical devices characterization, development, validation AAMI - Recognized essential principles of safety and routine control of a sterilization process and performance of medical devices - Part 2: for medical devices ANSI/AAMI/ISO 15223-1:2016, Medical devices General essential principles and additional Approved: 11/17/2016 - Symbols to be used with medical device specific essential principles for all IVD AAMI labels, labelling and information to be medical devices and guidance on the supplied - Part 1: General requirements selection of standards ANSI/AAMI/ISO 14161-2009 (R2014), Approved: 1/5/2017 Approved: 7/31/2017 Sterilization of health care products - AAMI AAMI Biological indicators - Guidance for the selection, use and interpretation of results ANSI/AAMI/ISO 15223-2-2016, Medical devices ANSI/AAMI/ISO 17664-2017, Sterilization of Approved: 4/2/2014 - Symbols to be used with medical device health care products - Information to be AAMI labels, labeling and information to be provided by the device manufacturer for the supplied - Part 2: Symbol development, processing of medical devices ANSI/AAMI/ISO 14708-1-2014, Implants for selection and validation Approved: 8/18/2017 surgery - Active implantable medical devices - Approved: 4/7/2016 AAMI Part 1: General requirements for safety, AAMI marking and for information to be provided ANSI/AAMI/ISO 17665-1-2005 (R2013), by the manufacturer ANSI/AAMI/ISO 15674-2016, Cardiovascular Sterilization of health care products -- Moist Approved: 10/8/2014 implants and artificial organs - Hardshell heat -- Part 1: Requirements for the AAMI cardiotomy/venous reservoir systems development, validation and routine control (with/without filter) and soft venous of a sterilization process for medical devices ANSI/AAMI/ISO 14708-3-2017, Implants for reservoir bags Approved: 12/2/2013 surgery - Active implantable medical devices - Approved: 11/7/2016 AAMI Part 3: Implantable neurostimulators AAMI Approved: 3/2/2017 ANSI/AAMI/ISO 18241-2016, Cardiovascular AAMI ANSI/AAMI/ISO 15675-2016, Cardiovascular implants and extracorporeal systems - implants and artificial organs - Cardiopulmonary bypass systems - Venous ANSI/AAMI/ISO 14708-4-2008 (R2011), Cardiopulmonary bypass systems - Arterial bubble traps Implants for surgery - Active implantable blood line filters Approved: 11/7/2016 medical devices - Part 4: Implantable infusion Approved: 11/7/2016 AAMI pumps AAMI Approved: 11/16/2011 ANSI/AAMI/ISO 18242-2016, Cardiovascular AAMI ANSI/AAMI/ISO 15676-2016, Cardiovascular implants and extracorporeal systems - implants and artificial organs - Requirements Centrifugal blood pumps ANSI/AAMI/ISO 14708-5-2010 (R2015), for single-use tubing packs for Approved: 11/7/2016 Implants for surgery - Active implantable cardiopulmonary bypass and extracorporeal AAMI medical devices - Part 5: Circulatory support membrane oxygenation (ECMO) devices Approved: 11/7/2016 ANSI/AAMI/ISO 20857-2010 (R2015), Approved: 11/20/2015 AAMI Sterilization of health care products - Dry AAMI heat: Requirements for the development, ANSI/AAMI/ISO 15882-2008 (R2013), validation and routine control of a ANSI/AAMI/ISO 14937-2009 (R2013), Sterilization of health care products - sterilization process for medical devices Sterilization of health care products -- Chemical indicators - Guidance for selection, Approved: 12/7/2015 General requirements for characterization of use and interpretation of results AAMI a sterilizing agent and the development, Approved: 10/4/2013 validation and routine control of a AAMI ANSI/AAMI/ISO 22442-1-2016, Medical devices sterilization process for medical devices utilizing animal tissues and their derivatives - Approved: 12/2/2013 Part 1: Application of risk management AAMI Approved: 11/17/2016 AAMI

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 7 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/AAMI/ISO 22442-2-2016, Medical devices ANSI/AAMI/ISO 5841-2-2014, Implants for ANSI/AAMI/ISO 80369-6-2016, Small-bore utilizing animal tissues and their derivatives - surgery - Cardiac pacemakers - Part 2: connectors for liquids and gases in healthcare Part 2: Controls on sourcing, collection and Reporting of clinical performance of applications -- Part 6: Connectors for handling populations of pulse generators or leads neuraxial applications Approved: 11/17/2016 Approved: 7/21/2014 Approved: 3/15/2016 AAMI AAMI AAMI

ANSI/AAMI/ISO 22442-3-2007 (R2016), Medical ANSI/AAMI/ISO 5841-3-2013 (R2018), Implants ANSI/AAMI/ISO 80369-7-2016, Small-bore devices utilizing animal tissues and their for surgery - Cardiac pacemakers - Part 3: connectors for liquids and gases in healthcare derivatives - Part 3: Validation of the Low-profile connectors (IS-1) for implantable applications - Part 7: Connectors with 6% elimination and/or inactivation of viruses and pacemakers (Luer) taper for intravascular or hypodermic transmissible spongiform encephalopathy Approved: 8/10/2018 applications (TSE) agents AAMI Approved: 9/27/2016 Approved: 11/22/2016 AAMI AAMI ANSI/AAMI/ISO 7198, Ed. 4-2016, Cardiovascular implants and extracorporeal ANSI/AAMI/ISO 81060-1-2007 (R2010), Non- ANSI/AAMI/ISO 25539-1-2017, Cardiovascular systems - Vascular Prostheses - Tubular invasive sphygmomanometers - Part 1: implants - Endovascular devices - Part 1: vascular grafts and vascular patches Requirements and test methods for non- Endovascular prostheses Approved: 8/2/2016 automated meaasurement type Approved: 5/25/2017 AAMI Approved: 6/26/2013 AAMI AAMI ANSI/AAMI/ISO 7199-2016, Cardiovascular ANSI/AAMI/ISO 25539-2-2012, Cardiovascular implants and artificial organs - Blood-gas ANSI/AAMI/ISO 81060-2-2019, Non-invasive implants - Endovascular devices - Part 2: exchangers (oxygenators) sphygmomanometers: Part 2: Clinical Vascular stents Approved: 12/6/2016 investigation of intermittent automated Approved: 12/4/2012 AAMI measurement type AAMI Approved: 5/10/2019 ANSI/AAMI/ISO 7199-2009/A1-2011 (R2014), AAMI ANSI/AAMI/ISO 25539-3-2012 (R2015), Cardiovascular implants and artificial organs - Cardiovascular Implants - Endovascular Blood-gas exchangers (oxygenators) ANSI/AAMI/ISO 8637-2010 (R2015), AM1-2013 Devices - Part 3: Vena Cava Filters Amendment 1 (R2015) , Cardiovascular Implants and Approved: 11/24/2015 Approved: 4/4/2014 Extracorporeal Systems - Hemodialyzers, AAMI AAMI Hemodiafilters, Hemofilters and Hemoconcentrators ANSI/AAMI/ISO 27185-2012 (R2017), Cardiac ANSI/AAMI/ISO 80369-1-2010, Small bore Approved: 11/20/2015 rhythm management devices - Symbols to be connectors for liquids and gases in healthcare AAMI used with cardiac rhythm management applications - Part 1: General requirements device labels, and information to be supplied Approved: 12/30/2010 ANSI/AAMI/ISO 8638-2010 (R2015), - General requirements AAMI Cardiovascular implants and extracorporeal Approved: 6/1/2017 systems - Extracorporeal blood circuit for AAMI ANSI/AAMI/ISO 80369-20-2015, Small-bore hemodialyzers, hemodiafilters and connectors for liquids and gases in healthcare hemofilters ANSI/AAMI/ISO 5840-1-2015, Cardiovascular applications - Part 20: Common test methods Approved: 11/19/2015 implants - Cardiac valve prostheses - Part 1: Approved: 4/20/2015 AAMI General requirements AAMI Approved: 11/16/2015 ANSI/AAMI/ISO/IEC 81060-2-2013, Non- AAMI ANSI/AAMI/ISO 80369-3-2016, Small-bore invasive sphygmomanometers - Part 2: connectors for liquids and gases in healthcare Clinical validation of automated ANSI/AAMI/ISO 5840-2-2015, Cardiovascular applications - Part 3: Connectors for enteral measurement type implants - Cardiac valve prostheses - Part 2: applications Approved: 6/26/2013 Surgically implanted heart valve substitutes Approved: 8/3/2016 AAMI Approved: 11/16/2015 AAMI AAMI ANSI/ANSI/AAMI ST15883-1-2009 (R2014), ANSI/AAMI/ISO 80369-5-2016, Small-bore Washer-disinfectors, Part 1: General ANSI/AAMI/ISO 5840-3-2012, Cardiovascular connectors for liquids and gases in healthcare requirements, terms and definitions and implants - Cardiac valve prostheses - Part 3: application - Part 5: Connectors for limb cuff tests Heart valve substitutes implanted by inflation applications Approved: 9/26/2014 minimally invasive techniques Approved: 7/1/2016 AAMI Approved: 12/4/2012 AAMI AAMI

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 8 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

AARST (AMERICAN ASSOCIATION OF ABMA (AMERICAN BRUSH ANSI/ABMA 19.1-2011 (R2018), Tapered Roller RADON SCIENTISTS AND TECHNOLOGISTS) MANUFACTURERS ASSOCIATION) Bearings - Radial Metric Design (reaffirmation of ANSI/ABMA 19.1-2011) ANSI/AARST CC-1000-2017, Soil Gas Control ANSI B165.1-2019, Power Driven Brushing Tools Approved: 10/18/2018 Systems in New Construction of Buildings -Safety Requirements for Design, Care and James Converse, (919) 481-2852, Approved: 1/19/2017 Use [email protected] [email protected] Approved: 1/11/2019 ABMA, 736 Main Ave, Ste 7, Durango, CO 81301 ANSI/ABMA 19.2-2013, Tapered Roller Bearings ANSI/AARST CC-1000-2018, Soil Gas Control -5479 - Radial - Inch Design Systems in New Construction of Buildings Approved: 1/10/2014 ABMA (ASC B3) (AMERICAN BEARING Approved: 12/11/2017 James Converse, (919) 481-2852, [email protected] MANUFACTURERS ASSOCIATION) [email protected]

ANSI/AARST CCAH-2013, Reducing Radon in ANSI/ABMA 10A-2001 (R2015), Metal Balls for ANSI/ABMA 20-2011, Radial Bearings of Ball, New Construction of 1 & 2 Family Dwellings Unground Bearings and Other Uses Cylindrical Roller and Spherical Roller Types and Townhouses Approved: 1/9/2015 Metric Design Approved: 1/4/2013 James Converse, (919) 481-2852, Approved: 11/17/2011 [email protected] [email protected] James Converse, (919) 481-2852, [email protected] ANSI/AARST MAH-2019, Protocol for ANSI/ABMA 11-2014, Load Ratings and Fatigue Conducting Measurements of Radon and Life for Roller Bearings ANSI/ABMA 21.1-1988 (S2010), Thrust Needle Radon Decay Products in Homes Approved: 7/21/2014 Roller and Cage Assemblies and Thrust Approved: 6/28/2019 James Converse, (919) 481-2852, Washers - Metric Design [email protected] Approved: 5/19/2010 [email protected] James Converse, (919) 481-2852, ANSI/AARST MALB-2014, Protocol for ANSI/ABMA 12.1-1992 (S2010), Instrument Ball [email protected] Conducting Radon and Radon Decay Product Bearings - Metric Design Measurements In Schools and Large Buildings Approved: 5/19/2010 ANSI/ABMA 21.2-1988 (S2010), Thrust Needle Approved: 12/5/2014 James Converse, (919) 481-2852, Roller and Cage Assemblies and Thrust [email protected] Washers - Inch Design [email protected] Approved: 5/19/2010 ANSI/ABMA 12.2-1992 (S2010), Instrument Ball ANSI/AARST MAMF-2017, Protocol for James Converse, (919) 481-2852, Bearings - Inch Design Conducting Measurements of Radon and [email protected] Radon Decay Product in Multifamily Buildings Approved: 5/19/2010 ANSI/ABMA 22.2-1988 (S2010), Spherical Plain Approved: 1/10/2017 James Converse, (919) 481-2852, [email protected] Radial Bearings, Joint Type - Inch Design [email protected] Approved: 5/19/2010 ANSI/ABMA 14-1995 (S2010), Housings for ANSI/AARST MS-PC-2015, Performance James Converse, (919) 481-2852, Bearings with Spherical Outside Surfaces Specifications for Instrumentation Systems [email protected] Approved: 5/19/2010 Designed to Measure Radon Gas in Air James Converse, (919) 481-2852, ANSI/ABMA 23.2-1988 (S2010), Thrust Bearings Approved: 5/26/2015 [email protected] of Tapered Roller Type - Inch Design [email protected] Approved: 5/19/2010 ANSI/ABMA 15-1991 (S2010), Ball Bearings with ANSI/AARST MS-QA-2019, Radon Measurement James Converse, (919) 481-2852, Spherical Outside Surfaces and Extended [email protected] Systems Quality Assurance Inner Ring Width (Includes Eccentric Locking Approved: 6/28/2019 Collars) ANSI/ABMA 24.1-1989 (S2010), Thrust Bearings [email protected] Approved: 5/19/2010 of Ball, Cylindrical Roller and Spherical Roller Types - Metric Design ANSI/AARST RMS-LB-2018, Radon Mitigation James Converse, (919) 481-2852, [email protected] Approved: 5/19/2010 Standards for Schools and Large Buildings Approved: 12/11/2017 James Converse, (919) 481-2852, ANSI/ABMA 18.1-1982 (S2013), Radial Needle [email protected] [email protected] Roller Bearings, Metric Design Approved: 1/10/2014 ANSI/ABMA 24.2-1989 (S2010), Thrust Bearings ANSI/AARST RMS-MF-2018, Radon Mitigation James Converse, (919) 481-2852, of Ball and Cylindrical Roller Types - Inch Standards for Multifamily Buildings [email protected] Design Approved: 12/11/2017 Approved: 5/19/2010 ANSI/ABMA 18.2-1982 (S2013), Needle Roller [email protected] James Converse, (919) 481-2852, Bearings - Radial, Inch Design [email protected] ANSI/AARST SGM-SF-2017, Soil Gas Mitigation Approved: 1/10/2014 Standards for Existing Homes James Converse, (919) 481-2852, ANSI/ABMA 25.2-1990 (S2010), Rolling Approved: 1/12/2017 [email protected] Bearings, Linear Motion Recirculating Ball, [email protected] Sleeve Type - Inch Series Approved: 5/19/2010 James Converse, (919) 481-2852, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 9 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ABMA 26.2-1994 (S2013), Thin Section ANSI/ABMA/ISO 12240-2-1998 (S2010), ANSI/ABMA/ISO 3096:2014, Rolling bearings - Ball Bearings - Inch design Spherical plain bearings - Part 2: Angular Needle rollers - Dimensions and tolerances Approved: 1/10/2014 contact spherical plain bearings Approved: 11/17/2014 James Converse, (919) 481-2852, Approved: 5/19/2010 James Converse, (919) 481-2852, [email protected] James Converse, (919) 481-2852, [email protected] [email protected] ANSI/ABMA 4-1994 (S2013), Tolerance ANSI/ABMA/ISO 3290-1:2014, Rolling bearings - Definition and Gauging Practices for Ball and ANSI/ABMA/ISO 12240-3-1998 (S2010), Balls - Part 1: Steel balls Roller Bearings Spherical plain bearings - Part 3: Thrust Approved: 8/1/2014 Approved: 1/10/2014 spherical plain bearings James Converse, (919) 481-2852, James Converse, (919) 481-2852, Approved: 5/19/2010 [email protected] [email protected] James Converse, (919) 481-2852, [email protected] ANSI/ABMA/ISO 3290-2:2014, Rolling bearings - ANSI/ABMA 7-1995 (S2013), Shaft and Housing Balls - Part 2: Ceramic balls Fits for Metric Radial Ball and Roller Bearings ANSI/ABMA/ISO 12240-4-1998 (S2010), Approved: 9/5/2014 (Except Tapered Roller Bearings) Conforming Spherical plain bearings - Part 4: Spherical James Converse, (919) 481-2852, to Basic Boundary Plans plain bearing rod ends [email protected] Approved: 1/10/2014 Approved: 5/19/2010 James Converse, (919) 481-2852, James Converse, (919) 481-2852, ANSI/ABMA/ISO 5593-1997 (S2013), Rolling [email protected] [email protected] bearings - Vocabulary (Bilingual edition) Approved: 1/10/2014 ANSI/ABMA 8.1-1990 (S2010), Ball and Roller ANSI/ABMA/ISO 15242-1-2016, Rolling bearings James Converse, (919) 481-2852, Bearing Mounting Accessories - Metric - Measuring methods for vibration - Part 1: [email protected] Design Fundamentals Approved: 5/19/2010 Approved: 4/18/2016 ANSI B3.1-1992 (S2010), Rolling Element James Converse, (919) 481-2852, James Converse, (919) 481-2852, Bearings - Aircraft Engine, Engine Gearbox, [email protected] [email protected] and Accessory Applications - Eddy Current Inspection ANSI/ABMA 8.2-1999 (S2010), Ball and Roller ANSI/ABMA/ISO 15242-2-2016, Rolling bearings Approved: 5/19/2010 Bearing Mounting Accessories - Inch Design - Measuring methods for vibration - Part 2: James Converse, (919) 481-2852, Approved: 5/19/2010 Radial ball bearings with cylindrical bore and [email protected] James Converse, (919) 481-2852, outside surface [email protected] Approved: 4/18/2016 ANSI B3.2-1992 (S2010), Rolling Element James Converse, (919) 481-2852, Bearings - Aircraft Engine, Engine Gearbox, ANSI ABMA 9-2015, Load Ratings and Fatigue [email protected] and Accessory Applications - Surface Visual Life for Ball Bearings Inspection Approved: 6/9/2015 ANSI/ABMA/ISO 15242-3-2018, Rolling bearings Approved: 5/19/2010 James Converse, (919) 481-2852, -- Measuring methods for vibration -- Part 3: James Converse, (919) 481-2852, [email protected] Radial spherical and tapered roller bearings [email protected] with cylindrical bore and outside surface ANSI/ABMA/ISO 10285-2009 (R2015), Rolling Approved: 7/11/2018 ANSI B3.3-1992 (S2010), Rolling Element bearings - Sleeve type linear ball bearings - James Converse, (919) 481-2852, Bearings - Aircraft Engine, Engine Gearbox, Boundary dimensions and tolerances [email protected] and Accessory Applications - Surface Temper Approved: 1/8/2015 Etch James Converse, (919) 481-2852, ANSI ABMA/ISO 15242-4-2018, , Rolling Approved: 5/19/2010 [email protected] Bearings -- Measuring Methods For Vibration James Converse, (919) 481-2852, -- Part 4: Radial Cylindrical Roller Bearings [email protected] ANSI/ABMA/ISO 104-2016, Rolling bearings - With Cylindrical Bore And Outside Surface Thrust bearings - Boundary dimensions, Approved: 2/27/2018 ABMSP (AMERICAN BOARD OF MULTIPLE general plan James Converse, (919) 481-2852, SPECIALTIES IN PODIATRY) Approved: 2/26/2016 [email protected] James Converse, (919) 481-2852, ANSI/ABMSP SDO 001-2018, Inserts for Diabetic [email protected] ANSI/ABMA/ISO 15243-2017, Rolling bearings - Footwear Damage and failures - Terms, characteristics Approved: 2/13/2019 ANSI/ABMA/ISO 12240-1-1998 (S201x), and causes Stephen B. Permison, Acting Director, ABMSP SDO, Spherical Plain Bearings - Part 1: Radial Approved: 8/4/2017 15012 Carry Back Drive, N. Potomac,MD 20878 Spherical Plain Bearings James Converse, (919) 481-2852, ABYC (AMERICAN BOAT AND YACHT Approved: 5/19/2010 [email protected] James Converse, (919) 481-2852, COUNCIL) [email protected] ANSI/ABMA/ISO 199-2014, Rolling bearings - Thrust bearings - Geometrical product ANSI/ABYC A-1-2018, MARINE LIQUEFIED specification (GPS) and tolerance values PETROLEUM GAS (LPG) SYSTEMS Approved: 12/4/2014 Approved: 6/15/2018 James Converse, (919) 481-2852, Helen Koepper, (410) 990-4460, hkoepper@abycinc. [email protected] org

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 10 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ABYC A-14-2015, Gasoline and Propane ANSI/ABYC A-32-2017, AC Power Conversion ANSI/ABYC E-30-2018, Electric Propulsion Gas Detection Systems Equipment and Systems Systems Approved: 12/30/2015 Approved: 7/11/2017 Approved: 6/15/2018 Helen Koepper, (410) 990-4460, hkoepper@abycinc. Helen Koepper, (410) 990-4460, hkoepper@abycinc. Helen Koepper, (410) 990-4460, hkoepper@abycinc. org org org

ANSI/ABYC A-16-2016, Electric Navigation ANSI/ABYC A-33-2018, Emergency ANSI/ABYC EDU-1-2015, On-Water Power Lights Engine/Propulsion Cut-off Devices Standards Approved: 6/27/2016 Approved: 7/10/2018 Approved: 11/12/2015 Helen Koepper, (410) 990-4460, hkoepper@abycinc. Helen Koepper, (410) 990-4460, hkoepper@abycinc. Helen Koepper, (410) 990-4460, hkoepper@abycinc. org org org

ANSI/ABYC A-22-2018, Marine Compressed ANSI/ABYC A-4-2018, Fire Fighting Equipment ANSI/ABYC EDU-2-2016, Skill-Based Human Natural Gas (CNG) Systems Approved: 7/18/2018 Propelled Standard Approved: 6/22/2018 Helen Koepper, (410) 990-4460, hkoepper@abycinc. Approved: 10/11/2016 Helen Koepper, (410) 990-4460, hkoepper@abycinc. org Helen Koepper, (410) 990-4460, hkoepper@abycinc. org org ANSI/ABYC A-6-2018, Refrigeration And Air ANSI/ABYC A-23-2018, Sound Signal Appliances Conditioning Equipment ANSI/ABYC EDU-3-2017, Skills-based Sail Approved: 7/13/2018 Approved: 6/15/2018 Standard Helen Koepper, (410) 990-4460, hkoepper@abycinc. Helen Koepper, (410) 990-4460, hkoepper@abycinc. Approved: 5/25/2017 org org Helen Koepper, (410) 990-4460, hkoepper@abycinc. org ANSI/ABYC A-24-2015, Carbon Monoxide ANSI/ABYC C-1-2016, Primer Bulbs Detection Systems on Boats Approved: 6/22/2016 ANSI/ABYC EDU-4-2018, On-Water Instruction Approved: 12/30/2015 Helen Koepper, (410) 990-4460, hkoepper@abycinc. Standard Helen Koepper, (410) 990-4460, hkoepper@abycinc. org Approved: 1/24/2018 org Helen Koepper, (410) 990-4460, hkoepper@abycinc. ANSI/ABYC C-1500-2019, Ignition Protection for org ANSI/ABYC A-26-2018, LPG AND CNG FUELED Marine Products APPLIANCES Approved: 7/1/2019 ANSI/ABYC H-1-2019, FIELD OF VISION FROM Approved: 6/15/2018 Helen Koepper, (410) 990-4460, hkoepper@abycinc. THE HELM POSITION Helen Koepper, (410) 990-4460, hkoepper@abycinc. org Approved: 7/9/2019 org Helen Koepper, (410) 990-4460, hkoepper@abycinc. ANSI/ABYC C-2-2016, Carbon Canisters org ANSI/ABYC A-27-2016, Alternating Current (AC) Approved: 6/22/2016 Generator Sets Helen Koepper, (410) 990-4460, hkoepper@abycinc. ANSI/ABYC H-2-2013, Ventilation of Boats Using Approved: 6/20/2016 org Gasoline Helen Koepper, (410) 990-4460, hkoepper@abycinc. Approved: 6/3/2013 org ANSI/ABYC C-3-2018, Alcohol, Kerosene and Helen Koepper, (410) 990-4460, hkoepper@abycinc. Solidified Fuel Cooking Appliances for Marine org ANSI/ABYC A-28-2019, Galvanic Isolators Use Approved: 6/28/2019 Approved: 7/10/2018 ANSI/ABYC H-22-2011, Electric Bilge Pump Helen Koepper, (410) 990-4460, hkoepper@abycinc. Helen Koepper, (410) 990-4460, hkoepper@abycinc. Systems org org Approved: 7/29/2011 Helen Koepper, (410) 990-4460, hkoepper@abycinc. ANSI/ABYC A-3-2013, Galley Stoves ANSI/ABYC E-10-2016, Storage Batteries org Approved: 5/28/2013 Approved: 6/27/2016 Helen Koepper, (410) 990-4460, hkoepper@abycinc. Helen Koepper, (410) 990-4460, hkoepper@abycinc. ANSI/ABYC H-24-2017, Gasoline Fuel Systems org org Approved: 6/30/2017 Helen Koepper, (410) 990-4460, hkoepper@abycinc. ANSI/ABYC A-30-2018, COOKING APPLIANCES ANSI/ABYC E-11-2018, AC & DC Electrical org WITH INTEGRAL LPG CYLINDERS Systems on Boats Approved: 6/15/2018 Approved: 7/13/2018 ANSI/ABYC H-25-2016, Portable Marine Helen Koepper, (410) 990-4460, hkoepper@abycinc. Helen Koepper, (410) 990-4460, hkoepper@abycinc. Gasoline Fuel Systems org org Approved: 6/22/2016 Helen Koepper, (410) 990-4460, hkoepper@abycinc. ANSI/ABYC A-31-2015, Battery Chargers and ANSI/ABYC E-2-2019, Cathodic Protection org Inverters Approved: 5/21/2019 Approved: 12/30/2015 Helen Koepper, (410) 990-4460, hkoepper@abycinc. ANSI/ABYC H-26-2016, Powering of Boats Helen Koepper, (410) 990-4460, hkoepper@abycinc. org Approved: 7/13/2016 org Helen Koepper, (410) 990-4460, hkoepper@abycinc. org

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 11 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ABYC H-28-2016, Inflatable Boats ANSI/ABYC H-8-2017, Buoyancy in the Event of ANSI/ABYC P-4-2019, Marine Inboard Engines Approved: 6/22/2016 Flooding/Swamping and Transmissions Helen Koepper, (410) 990-4460, hkoepper@abycinc. Approved: 6/15/2017 Approved: 7/9/2019 org Helen Koepper, (410) 990-4460, hkoepper@abycinc. Helen Koepper, (410) 990-4460, hkoepper@abycinc. org org ANSI/ABYC H-29-2019, CANOES AND KAYAKS Approved: 7/9/2019 ANSI/ABYC P-1-2009, Installation of Exhaust ANSI/ABYC P-6-2016, Propeller Shafting Helen Koepper, (410) 990-4460, hkoepper@abycinc. Systems for Propulsion and Auxiliary Engines Systems org Approved: 5/29/2009 Approved: 6/27/2016 Helen Koepper, (410) 990-4460, hkoepper@abycinc. Helen Koepper, (410) 990-4460, hkoepper@abycinc. ANSI/ABYC H-3-2019, Exterior Windows, org org Windshields, Hatches, Doors, Port Lights, and Glazing Materials ANSI/ABYC P-1-2019, Installation of Exhaust ANSI/ABYC S-30-2017, Outboard Engine and Approved: 5/21/2019 Systems for Propulsion and Auxiliary Engines Related Equipment Weights Helen Koepper, (410) 990-4460, hkoepper@abycinc. Approved: 7/9/2019 Approved: 7/12/2017 org Helen Koepper, (410) 990-4460, hkoepper@abycinc. Helen Koepper, (410) 990-4460, hkoepper@abycinc. org org ANSI/ABYC H-30-2017, Hydraulic Systems Approved: 6/15/2017 ANSI/ABYC P-14-2016, Mechanical Propulsion ANSI/ABYC S-31-2017, Environmental Helen Koepper, (410) 990-4460, hkoepper@abycinc. Control Systems Consideration for Systems and Components org Approved: 6/22/2016 Installed Onboard Boats Helen Koepper, (410) 990-4460, hkoepper@abycinc. Approved: 7/12/2017 ANSI/ABYC H-31-2017, Seat Structures org Helen Koepper, (410) 990-4460, hkoepper@abycinc. Approved: 7/11/2017 org Helen Koepper, (410) 990-4460, hkoepper@abycinc. ANSI/ABYC P-17-2018, Mechanical Steering org Systems ANSI/ABYC S-7-2015, Boat Capacity Labels Approved: 6/27/2018 Approved: 12/30/2015 ANSI/ABYC H-32-2013 (R2018), Ventilation of Helen Koepper, (410) 990-4460, hkoepper@abycinc. Helen Koepper, (410) 990-4460, hkoepper@abycinc. Boats Using Diesel Fuel org org Approved: 6/15/2018 Helen Koepper, (410) 990-4460, hkoepper@abycinc. ANSI/ABYC P-18-2013, Cable Over Pulley ANSI/ABYC S-8-2016, Boat Measurement and org Steering Systems for Outboard Engines Weight Approved: 6/3/2013 Approved: 6/20/2016 ANSI/ABYC H-33-2016, Diesel Fuel Systems Helen Koepper, (410) 990-4460, hkoepper@abycinc. Helen Koepper, (410) 990-4460, hkoepper@abycinc. Approved: 6/27/2016 org org Helen Koepper, (410) 990-4460, hkoepper@abycinc. org ANSI/ABYC P-21-2017, Manual Hydraulic ANSI/ABYC T-1-2010, Aluminum Applications Steering Systems for Boats and Yachts ANSI/ABYC H-35-2017, Powering and Load Approved: 6/22/2017 Approved: 3/11/2010 Capacity of Pontoon Boats Helen Koepper, (410) 990-4460, hkoepper@abycinc. Helen Koepper, (410) 990-4460, hkoepper@abycinc. Approved: 6/15/2017 org org Helen Koepper, (410) 990-4460, hkoepper@abycinc. org ANSI/ABYC P-22-2018, Steering Wheels ACC (AMERICAN CHEMISTRY COUNCIL) Approved: 6/15/2018 ANSI/ACC Z400.1/Z129.1-2010, American ANSI/ABYC H-37-2017, Jet Boats - Light Weight Helen Koepper, (410) 990-4460, hkoepper@abycinc. National Standard for Hazardous Workplace Approved: 6/15/2017 org Chemicals - Hazard Evaluation and Safety Helen Koepper, (410) 990-4460, hkoepper@abycinc. org ANSI/ABYC P-23-2017, Mechanical Steering and Data Sheet and Precautionary Labeling Propulsion Controls for Jet Boats Preparation ANSI/ABYC H-4-2015, Cockpit Drainage Systems Approved: 7/12/2017 Approved: 5/28/2010 Approved: 12/30/2015 Helen Koepper, (410) 990-4460, hkoepper@abycinc. Susan Blanco, (703) 741-5227, Helen Koepper, (410) 990-4460, hkoepper@abycinc. org [email protected] org ANSI/ABYC P-24-203, Electric/Electronic ACCA (AIR CONDITIONING CONTRACTORS ANSI/ABYC H-40-2019, ANCHORING, MOORING, Propulsion Control Systems OF AMERICA) AND STRONG POINTS Approved: 3/13/2013 ANSI/ACCA 1 Manual D-2016, Residential Duct Approved: 5/21/2019 Helen Koepper, (410) 990-4460, hkoepper@abycinc. Systems Helen Koepper, (410) 990-4460, hkoepper@abycinc. org org Approved: 10/21/2016 ANSI/ABYC P-27-2013, Electric/Electronic www.acca.org/ansi ANSI/ABYC H-5-2017, Boat Load Capacity Steering Control Systems Approved: 6/15/2017 Approved: 6/3/2013 ANSI/ACCA 10 Manual SPS-2010 (RA 2017), HVAC Design for Swimming Pools and Spas Helen Koepper, (410) 990-4460, hkoepper@abycinc. Helen Koepper, (410) 990-4460, hkoepper@abycinc. org org Approved: 9/27/2017 www.acca.org/ansi

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 12 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ACCA 11 Manual Zr-2018, Residential ACDE (ASSOCIATION OF COMMERCIAL ANSI/ADA 169-2019, Periodontal probes Zoning DIVING EDUCATORS) General requirements Approved: 2/20/2018 Approved: 8/26/2019 www.acca.org/ansi ANSI/ACDE 01-2015, Commercial Diver Training Marilyn Ward Minimum Standard ANSI/ACCA 12 QH-2018, Home Evaluation and Approved: 1/7/2015 ANSI/ADA 170-2019, Periodontal Probes -- Performance Improvement Donald Fast c/o The Ocean Corporation 10840 Dental excavators -- Discoid Type -- General Approved: 1/26/2018 Rockley Rd, Houston, Texas, 77099 Requirements Approved: 8/26/2019 www.acca.org/ansi ACMA (AMERICAN COMPOSITES Marilyn Ward ANSI/ACCA 14 QMref-2015, Quality MANUFACTURERS ASSOCIATION) Maintenance of Commercial Refrigeration ANSI/ADA 171-2019, Analysis of Fluoride Systems ANSI/ACMA UEF-1-2019, Estimating Emission Condentration in Aqueous Solutions by Use Approved: 10/14/2015 Factors from Open Molding and Other of Fluoride Ion-Selective Electrode Composite Processes www.acca.org/ansi Approved: 8/26/2019 Approved: 7/31/2019 Marilyn Ward ANSI/ACCA 2 Manual J-2016, Residential Load John Busel, (914) 961-8007, [email protected] Calculations ANSI/ADA 172-2019, Minimal Dental Implant Approved: 2/5/2016 ANSI/ACMA/FGMC-Grating Manual-2017, Data Set for Clinical Use Fiberglass Composites Grating Manual for www.acca.org/ansi Approved: 8/26/2019 Pultruded and Molded Grating and Stair Marilyn Ward ANSI/ACCA 3 Manual S-2014, Residential Treads Equipment Selection Approved: 8/30/2017 ANSI/ADA 173-2019, Designation System for Approved: 5/12/2014 John Busel, (914) 961-8007, [email protected] Dental Implants www.acca.org/ansi Approved: 8/26/2019 ANSI/ACMA/UCSC-FRP Composite Utility Poles Marilyn Ward ANSI/ACCA 4 QM-2019, Maintenance of -1-2018, ANSI/ACMA/UCSC-Standard Residential HVAC Systems Specification for FRP Composite Utility Poles ANSI/ADA 96, ISO 9917-2012, Dental Water- Approved: 2/5/2019 Approved: 9/13/2018 Based Cements www.acca.org/ansi John Busel, (914) 961-8007, [email protected] Approved: 11/26/2012 Marilyn Ward ANSI/ACCA 5 QI-2015, HVAC Quality Installation ANSI/AMCA PIC-Standard Practice-2011, Code Specifications of Standard Practice - Industry Guidelines for ANSI/ADA No. 135-2015, Denture Adhesives Approved: 6/19/2015 Fabrication and Installation of Pultruded FRP Approved: 12/17/2015 Structures www.acca.org/ansi Marilyn Ward Approved: 2/23/2012 ANSI/ACCA 5 QI Addendum-2010, HVAC Quality John Busel, (914) 961-8007, [email protected] ANSI/ADA No. 19-2017, Elastomeric Impression Installation Specification Materials ADA (ORGANIZATION) (AMERICAN Approved: 5/28/2013 Approved: 8/4/2017 DENTAL ASSOCIATION) www.acca.org/ansi Marilyn Ward

ANSI/ACCA 6 QR-2015, Restoring the ANSI/ADA 100, ISO 27020-2012 (R2018), ANSI/ADA Standard 136-2015, Products for Cleanliness of HVAC Systems Orthodontic Brackets and Tubes External Tooth Bleaching Approved: 10/31/2018 Approved: 7/9/2015 Approved: 1/29/2015 www.acca.org/ansi Marilyn Ward Marilyn Ward

ANSI/ACCA 9 QIvp Standard-2016, HVAC ANSI/ADA 125-2018, Manual Interdental ANSI/ADA Standard No 88-2000 (R2012), Dental Quality Installation Verification Protocols Brushes Brazing Alloys Approved: 4/20/2016 Approved: 10/31/2018 Approved: 8/22/2012 Marilyn Ward www.acca.org/ansi Marilyn Ward

ACCT (ASSOCIATION FOR CHALLENGE ANSI/ADA 125, ISO 16409-2012, Manual ANSI/ADA Standard No. 1000-2010 (R2015), COURSE TECHNOLOGY) Interdental Brushes Standard Clinical Data Architecture Approved: 11/26/2012 Approved: 8/11/2015 Marilyn Ward ANSI/ACCT 03-2019, Challenge Course and Marilyn Ward Canopy/Zip Line Tours Standards Approved: 7/18/2019 ANSI/ADA 144-2018, Alloy for Dental Amalgam ANSI/ADA Standard No. 101-2001, Root Canal Approved: 10/31/2018 Instruments: General Requirements Marilyn Ward Approved: 9/20/2010 ANSI/ADA 167-2018, Dental Unit Water Line Marilyn Ward Test Methods Approved: 5/18/2018 Marilyn Ward

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 13 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ADA Standard No. 1027-2010 (R2015), ANSI/ADA Standard No. 113-2015, Periodontal ANSI/ADA Standard No. 139-2012, Dental Base Implementation Guide for ADA Standard No. Curettes, Dental Scalers and Excavators Polymers 1000 - Standard Clinical Data Architecture Approved: 12/17/2015 Approved: 6/6/2012 Approved: 12/17/2015 Marilyn Ward Marilyn Ward Marilyn Ward ANSI/ADA Standard No. 116-2010, Oral Rinses ANSI/ADA Standard No. 141 (ISO 14356)-2013 ANSI/ADA Standard No. 1039-2006 (R2014), Approved: 2/25/2010 (R2018), Dental Duplicating Material Standard Clinical Conceptual Data Model Marilyn Ward Approved: 10/31/2018 Approved: 10/6/2014 Marilyn Ward Marilyn Ward ANSI/ADA Standard No. 117-2018, Fluoride Varnishes ANSI/ADA Standard No. 15-2008 (R2013), ANSI/ADA Standard No. 1047-2009, Standard Approved: 5/18/2018 Artificial Teeth for Dental Prostheses Content of an Electronic Periodontal Marilyn Ward Approved: 5/28/2013 Attachment Marilyn Ward Approved: 1/19/2010 ANSI/ADA Standard No. 119-2015, Manual Marilyn Ward Toothbrushes ANSI/ADA Standard No. 151-2015, Screening Approved: 1/29/2015 Method for Erosion Potential of Oral Rinses ANSI/ADA Standard No. 105-2010 (R2015), Marilyn Ward on Dental Hard Tissues Orthodontic Elastomeric Materials Approved: 5/29/2015 Approved: 10/26/2015 ANSI/ADA Standard No. 120-2009 (R2014), Marilyn Ward Marilyn Ward Powered Toothbrushes Approved: 9/8/2014 ANSI/ADA Standard No. 159-2018, Coiled ANSI/ADA Standard No. 1058-2010 (R2015), Marilyn Ward Springs for Use in Orthodontics Forensic Dental Data Set Approved: 5/18/2018 Approved: 12/17/2015 ANSI/ADA Standard No. 122-2007 (R2019), Marilyn Ward Marilyn Ward Dental Casting and Baseplate Waxes Approved: 8/26/2019 ANSI/ADA Standard No. 161-2018, Guidance on ANSI/ADA Standard No. 1067-2013 (R2018), Marilyn Ward Color Measurement in Dentistry Electronic Dental System Standard Functional Approved: 5/18/2018 Requirements ANSI/ADA Standard No. 126-2018, Casting Marilyn Ward Approved: 10/31/2018 Investments and Refractory Die Materials Marilyn Ward Approved: 5/18/2018 ANSI/ADA Standard No. 163-2018, Dental Marilyn Ward Furnace-Test Method for Temperature ANSI/ADA Standard No. 1079-2015, Standard Measurement with Separate Thermocouple Content of Electronic Attachments for Dental ANSI/ADA Standard No. 127-2018, Dynamic Approved: 5/18/2018 Claims Load Test for Endosseous Dental Implants Marilyn Ward Approved: 12/17/2015 Approved: 5/18/2018 Marilyn Ward Marilyn Ward ANSI/ADA Standard No. 164-2018, Dental Furnace-Part 2: Test Method for Evaluation ANSI/ADA Standard No. 108-2009, Amalgam ANSI/ADA Standard No. 128-2015, Hydrocolloid of Furnace Program via Firing Glaze Separators Impression Materials Approved: 5/18/2018 Approved: 2/24/2009 Approved: 1/29/2015 Marilyn Ward Marilyn Ward Marilyn Ward ANSI/ADA Standard No. 17-1983 (R2014), ANSI/ADA Standard No. 108, Addendum-2011, ANSI/ADA Standard No. 130-2013, Dentifrices - Denture Base Temporary Relining Resins Amalgam Separators Requirements, Test Methods and Marking Approved: 9/8/2014 Approved: 11/14/2011 Approved: 8/12/2013 Marilyn Ward Marilyn Ward Marilyn Ward ANSI/ADA Standard No. 178-2019, Orthodontic ANSI/ADA Standard No. 1084-2019, Reference ANSI/ADA Standard No. 131-2015, Dental Anchor Screws Core Data Set for Communication Among CAD/CAM Machinable Zirconia Blanks Approved: 8/26/2019 Dental and Other Health Information Systems Approved: 5/29/2015 Marilyn Ward Approved: 5/21/2019 Marilyn Ward Marilyn Ward ANSI/ADA Standard No. 2000.2-2018, SNODENT ANSI/ADA Standard No. 132-2015, Scanning (Systemized Nomenclature of Dentistry) ANSI/ADA Standard No. 109-2006 (R2018), Accuracy of Dental Chairside and Laboratory Approved: 12/3/2018 Procedures for Storing Dental Amalgam CAD/CAM Systems Marilyn Ward Waste and Requirements for Amalgam Waste Approved: 5/29/2015 Storage/Shipment Containers Marilyn Ward ANSI/ADA Standard No. 23-1982 (R2015), Approved: 10/31/2018 Dental Excavating Burs Marilyn Ward ANSI/ADA Standard No. 134-2018, Metallic Approved: 10/26/2015 Materials for Fixed and Removable Marilyn Ward Restorations and Applicances Approved: 5/18/2018 Marilyn Ward

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 14 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ADA Standard No. 25-2015, Dental ANSI/ADA Standard No. 41-2015, Evaluation of ANSI/ADA Standard No. 69-2017, Dental Gypsum Products Biocompatibility of Medical Devices Used in Ceramic Approved: 12/17/2015 Dentistry Approved: 12/21/2017 Marilyn Ward Approved: 12/23/2015 Marilyn Ward Marilyn Ward ANSI/ADA Standard No. 27-2016, Polymer- ANSI/ADA Standard No. 70-1999 (R2010), Based Restorative Materials ANSI/ADA Standard No. 43-1986 (R2015), Dental X-Ray Protective Aprons and Approved: 6/22/2016 Electrically Powered Dental Amalgamators Accessory Devices Marilyn Ward Approved: 12/15/2015 Approved: 9/20/2010 Marilyn Ward Marilyn Ward ANSI/ADA Standard No. 28-2008 (R2013), Root Canal Files and Reamers, Type K ANSI/ADA Standard No. 46-2016, Dental Patient ANSI/ADA Standard No. 71-2008 (R2013), Root Approved: 6/12/2013 Chair Canal Filling Condensers (Pluggers and Marilyn Ward Approved: 6/22/2016 Spreaders) Marilyn Ward Approved: 6/12/2013 ANSI/ADA Standard No. 30-2013 (R2018), Marilyn Ward Dental Zinc Oxide - Eugenol and Zinc Oxide - ANSI/ADA Standard No. 47-2006 (R2017), Non-Eugenol Cements Dental Units ANSI/ADA Standard No. 73-2008 (R2013), Approved: 10/31/2018 Approved: 1/17/2017 Dental Absorbent Points Marilyn Ward Marilyn Ward Approved: 12/30/2013 Marilyn Ward ANSI/ADA Standard No. 32-2017, Orthodontic ANSI/ADA Standard No. 48-2004 (R2015), Wires Visible Light Curing Units ANSI/ADA Standard No. 74-2010 (R2015), Approved: 9/12/2017 Approved: 10/26/2015 Dental Operator's Stool Marilyn Ward Marilyn Ward Approved: 10/26/2015 Marilyn Ward ANSI/ADA Standard No. 33-2003 (R2014), ANSI/ADA Standard No. 48-2-2009 (R2015), LED Dental Products Standards Development Curing Lights ANSI/ADA Standard No. 75-1997 (R2014), Vocabulary Approved: 10/26/2015 Resilient Lining Materials for Removable Approved: 9/8/2014 Marilyn Ward Dentures - Part 1: Short-Term Materials Marilyn Ward Approved: 9/8/2014 ANSI/ADA Standard No. 53-2008 (R2013), Marilyn Ward ANSI/ADA Standard No. 34 (ISO 9997)-2013, Polymer-Based Crown and Bridge Materials Dental Cartridge Syringes Approved: 8/12/2013 ANSI/ADA Standard No. 78-2013, Dental Approved: 2/19/2013 Marilyn Ward Obturating Cones Marilyn Ward Approved: 8/12/2013 ANSI/ADA Standard No. 54-1986 (R2014), Marilyn Ward ANSI/ADA Standard No. 35-2019, Dental Double-Pointed, Parenteral, Single Use Handpieces and Motors Needles for Dentistry ANSI/ADA Standard No. 80-2001 (R2013), Approved: 8/26/2019 Approved: 9/8/2014 Dental Materials-Determination of Color Marilyn Ward Marilyn Ward Stability Approved: 5/28/2013 ANSI/ADA Standard No. 37-2001 (R2015), ANSI/ADA Standard No. 57-2000 (R2012), Marilyn Ward Dental Abrasive Powders Endodontic Sealing Materials Approved: 12/15/2015 Approved: 8/22/2012 ANSI/ADA Standard No. 85-Part 1-2004 Marilyn Ward Marilyn Ward (R2009), Disposable Prophy Angles Approved: 12/22/2009 ANSI/ADA Standard No. 38-2000 (R2015), ANSI/ADA Standard No. 58-2010 (R2015), Root Marilyn Ward Metal-Ceramic Dental Restorative Systems Canal Files, Type H (Hedstrom) Approved: 10/26/2015 Approved: 10/26/2015 ANSI/ADA Standard No. 87-1995 (R2014), Marilyn Ward Marilyn Ward Dental Impression Trays Approved: 9/8/2014 ANSI/ADA Standard No. 39-2006 (R2011), Pit ANSI/ADA Standard No. 62-2005 (R2015), Marilyn Ward and Fissure Sealants Dental Abrasive Pastes Approved: 11/11/2011 Approved: 12/15/2015 ANSI/ADA Standard No. 88-2019, Dental Marilyn Ward Marilyn Ward Brazing Alloys Approved: 8/26/2019 ANSI/ADA Standard No. 3950-2015, Designation ANSI/ADA Standard No. 63-2013, Root Canal Marilyn Ward System for Teeth and Areas of the Oral Cavity Barbed Broaches and Rasps Approved: 12/30/2015 Approved: 8/12/2013 ANSI/ADA Standard No. 89-2017, Dental Marilyn Ward Marilyn Ward Operating Lights Approved: 12/21/2017 Marilyn Ward

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 15 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ADA Standard No. 94-1996 (R2014), ANSI GPTC Z380.1-2018, Addendum No. 4, ANSI/AGMA 2001-D04-2010 (R2016), Dental Compressed Air Quality Guide for Transmission, Distribution and Fundamental Rating Factors and Calculation Approved: 9/8/2014 Gathering Piping Systems Methods for Involute Spur and Helical Gear Marilyn Ward Approved: 7/31/2019 Teeth Michael Bellman, (202) 824-7183, mbellman@aga. Approved: 3/16/2016 ANSI/ADA Standard No. 95-2013, Root Canal org William Bradley, AGMA; [email protected] Enlargers Approved: 9/13/2013 ANSI/GPTC Z380.1-2018, Addendum No. 3, ANSI/AGMA 2002-C-2016, Tooth Thickness and Marilyn Ward Guide for Transmission, Distribution and Backlash Measurement of Cylindrical Involute Gathering Piping Systems Gearing ANSI/ADA Standard No. 97-2002 (R2013), Approved: 5/21/2019 Approved: 5/3/2016 Corrosion Test Methods Michael Bellman, (202) 824-7183, mbellman@aga. William Bradley, AGMA; [email protected] Approved: 5/29/2013 org Marilyn Ward ANSI/AGMA 2003-D19, Rating the Pitting AGMA (AMERICAN GEAR Resistance and Bending Strength of ANSI/ADA Standard No. 99-2001 (R2013), MANUFACTURERS ASSOCIATION) Generated Straight Bevel, Zerol Bevel and Athletic Mouth Protectors and Materials Spiral Bevel Gear Teeth Approved: 5/28/2013 ANSI/AGMA 1003-2007 (R2014), Tooth Approved: 5/14/2019 Proportions for Fine-Pitch Spur and Helical Marilyn Ward William Bradley, AGMA; [email protected] Gearing AGA (ASC B109) (AMERICAN GAS Approved: 3/7/2014 ANSI/AGMA 2004-2008 (R2014), Gear ASSOCIATION) William Bradley, AGMA; [email protected] Materials, Heat Treatment and Processing Manual ANSI B109.1-2019, ASD B109.1 Diaphragm-Type ANSI/AGMA 1006-A97 (R2016), Tooth Approved: 3/7/2014 Proportions for Plastic Gears Gas Displacement Meters (Under 500 Cubic William Bradley, AGMA; [email protected] Feet Hour Capacity) Approved: 8/29/2016 Approved: 4/8/2019 William Bradley, AGMA; [email protected] ANSI/AGMA 2007-C00:1995/ISO 14104:1995 Jeffrey Meyers, (202) 824-7333, [email protected] (R2013), Gears - Surface Temper Etch ANSI/AGMA 1010-2014, Appearance of Gear Inspection after Grinding ANSI B109.3-2019, ASD B109.3 Rotary-Type Gas Teeth - Terminology of Wear and Failure Approved: 8/1/2013 Approved: 8/8/2014 Displacement Meters William Bradley, AGMA; [email protected] Approved: 2/5/2019 William Bradley, AGMA; [email protected] Jeffrey Meyers, (202) 824-7333, [email protected] ANSI/AGMA 2008-D11 (R2016), Assembling ANSI/AGMA 1012-2005 (R2011), Gear Bevel Gears ANSI B109.4-2017, Self-Operated Diaphragm Nomenclature, Definitions of Terms with Approved: 12/27/2016 Symbols Type Natural Gas Service Regulators William Bradley, AGMA; [email protected] Approved: 2/3/2017 Approved: 3/15/2011 Jeffrey Meyers, (202) 824-7333, [email protected] William Bradley, AGMA; [email protected] ANSI/AGMA 2011-B14-2014, Cylindrical Wormgearing Tolerance and Inspection AGA (ASC Z223) (AMERICAN GAS ANSI/AGMA 1102-2013, Tolerance Specification Methods ASSOCIATION) for Gear Hobs Approved: 10/3/2014 Approved: 4/8/2013 William Bradley, AGMA; [email protected] ANSI Z223.1/NFPA 54-2018, National Fuel Gas William Bradley, AGMA; [email protected] Code ANSI/AGMA 2015-2-B2015, Accuracy Approved: 8/3/2017 ANSI/AGMA 1103-2007 (R2014), Tooth Classification System - Radial Measurements Paul Cabot, (202) 824-7312, [email protected] Proportions for Fine-Pitch Spur and Helical for Cylindrical Gears Gearing - Metric Edition Approved: 9/2/2015 AGA (ASC Z380) (AMERICAN GAS Approved: 3/7/2014 William Bradley, AGMA; [email protected] ASSOCIATION) William Bradley, AGMA; [email protected] ANSI/AGMA 2101-D04-2010 (R2016), ANSI/GPTC Z380.1-2018, Addendum No. 1 ANSI/AGMA 1104-2009 (R2015), Tolerance Fundamental Rating Factors and Calculation -2018, Guide for Transmission, Distribution Specification for Shaper Cutters Methods for Involute Spur and Helical Gear and Gathering Piping Systems Approved: 2/12/2015 Teeth Approved: 9/20/2018 William Bradley, AGMA; [email protected] Approved: 3/16/2016 Michael Bellman, (202) 824-7183, mbellman@aga. William Bradley, AGMA; [email protected] org ANSI/AGMA 1106-A97 (R2016), Tooth Proportions for Plastic Gears - Metric Edition ANSI/AGMA 2111-A98 (R2015), Cylindrical ANSI/GPTC Z380.1-2018, Addendum No. 2 Approved: 8/29/2016 Wormgearing Tolerance and Inspection -2018, Guide for Transmission, Distribution William Bradley, AGMA; [email protected] Methods (Metric) and Gathering Piping Systems Approved: 12/4/2015 Approved: 2/1/2019 William Bradley, AGMA; [email protected] Michael Bellman, (202) 824-7183, mbellman@aga. org

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 16 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/AGMA 2116-A05 (R2017), Evaluation of ANSI/AGMA 6032-B-2013 (R2018), Standard for ANSI/AGMA 6133-2008 (R2014), Materials for Double Flank Testers for Radial Composite Marine Gear Units: Rating and Application for Marine Propulsion Gearing- Metric Edition Measurement of Gears Spur and Helical Gear Teeth Approved: 3/11/2014 Approved: 2/2/2017 Approved: 12/14/2018 William Bradley, AGMA; [email protected] William Bradley, AGMA; [email protected] William Bradley, AGMA; [email protected] ANSI/AGMA 6135-2008 (R2019), Design, Rating ANSI/AGMA 6000-B96 (R2016), Specification ANSI/AGMA 6033-2008 (R2014), Materials for and Application of Industrial Globoidal for Measurement of Linear Vibration on Gear Marine Propulsion Gearing Wormgearing (Metric Edition) Units Approved: 3/11/2014 Approved: 5/14/2019 Approved: 3/16/2016 William Bradley, AGMA; [email protected] William Bradley, AGMA; [email protected] William Bradley, AGMA; [email protected] ANSI/AGMA 6034-B92-2010 (R2016), Practice ANSI/AGMA 9000-D11-2011 (R2016), Flexible ANSI/AGMA 6001-F-2019, Design and Selection for Enclosed Cylindrical Wormgear Speed Couplings - Potential Unbalance Classification of Components for Enclosed Gear Drives Reducers and Gearmotors Approved: 12/8/2016 Approved: 1/18/2019 Approved: 3/31/2016 William Bradley, AGMA; [email protected] William Bradley, AGMA; [email protected] William Bradley, AGMA; [email protected] ANSI/AGMA 9001-C-2018, Flexible Couplings ANSI/AGMA 6002-C2015, Design Guide for ANSI/AGMA 6035-2002 (R2019), Design, Rating Lubrication Vehicle Spur and Helical Gears and Application of Industrial Globoidal Approved: 6/15/2018 Approved: 7/6/2015 Wormgearing William Bradley, AGMA; [email protected] William Bradley, AGMA; [email protected] Approved: 5/14/2019 William Bradley, AGMA; [email protected] ANSI/AGMA 9002-C2014, Bores and Keyways ANSI/AGMA 6008-A98 (R2017), Specifications for Flexible Couplings (Inch Series) for Powder Metallurgy Gears ANSI/AGMA 6101-F-2019, Design and Selection Approved: 12/8/2014 Approved: 12/14/2017 of Components for Enclosed Gear Drive William Bradley, AGMA; [email protected] William Bradley, AGMA; [email protected] (Metric Edition) Approved: 2/1/2019 ANSI/AGMA 9003-C-2017, Flexible Couplings - ANSI/AGMA 6011-2014, Specification for High William Bradley, AGMA; [email protected] Keyless Fits Speed Helical Gear Units Approved: 12/6/2017 Approved: 8/8/2014 ANSI/AGMA 6102-C2015, Design Guide for William Bradley, AGMA; [email protected] William Bradley, AGMA; [email protected] Vehicle Spur and Helical Gears (Metric Edition) ANSI/AGMA 9004-B-2008 (R2014), Flexible ANSI/AGMA 6013-B-2016, Standard for Approved: 7/6/2015 Couplings - Mass Elastic Properties and Other Industrial Enclosed Gear Drives William Bradley, AGMA; [email protected] Characteristics Approved: 4/5/2016 Approved: 5/29/2014 William Bradley, AGMA; [email protected] ANSI/AGMA 6113-B-2016, Standard for William Bradley, AGMA; [email protected] Industrial Enclosed Gear Drives - Metric ANSI/AGMA 6014-B-2015, Gear Power Rating Edition ANSI/AGMA 9005-F-2016, Industrial Gear for Cylindrical Shell and Trunnion Supported Approved: 4/5/2016 Lubrication Equipment William Bradley, AGMA; [email protected] Approved: 3/23/2016 Approved: 10/21/2015 William Bradley, AGMA; [email protected] William Bradley, AGMA; [email protected] ANSI/AGMA 6114-B-2015, Gear Power Rating for Cylindrical Shell and Trunnion Supported ANSI/AGMA 9006-A-2016, Flexible Couplings - ANSI/AGMA 6015-2013 (R2018), Power Rating Equipment- Metric Edition Basis for Rating of Single and Double Helical Gearing for Approved: 10/21/2015 Approved: 4/18/2016 Rolling Mill Service William Bradley, AGMA; [email protected] William Bradley, AGMA; [email protected] Approved: 12/17/2018 William Bradley, AGMA; [email protected] ANSI/AGMA 6115-2013 (R2018), Power Rating ANSI/AGMA 9008-B99 (R2017), Flexible of Single and Double Helical Gearing for Couplings - Gear Type - Flange Dimensions ANSI/AGMA 6025-D98 (R2016), Sound for Rolling Mill Service- Metric Edition (Inch Series) Enclosed Helical, Herringbone and Spiral Approved: 12/14/2018 Approved: 12/19/2017 Bevel Gear Drives William Bradley, AGMA; [email protected] William Bradley, AGMA; [email protected] Approved: 3/16/2016 William Bradley, AGMA; [email protected] ANSI/AGMA 6123-C2016, Design Manual for ANSI/AGMA 9009-D02 (R2014), Flexible Enclosed Epicyclic Gear Drive Couplings - Nomenclature for Flexible ANSI/AGMA 6025-E-2019, Sound for Enclosed Approved: 8/26/2016 Couplings Helical, Herringbone and Spiral Bevel Gear William Bradley, AGMA; [email protected] Approved: 7/28/2014 Drives William Bradley, AGMA; [email protected] Approved: 1/18/2019 ANSI/AGMA 6132-B-2013 (R2018), Standard for William Bradley, AGMA; [email protected] Marine Gear Units: Rating and Application for ANSI/AGMA 9103-C-2017, Flexible Couplings - Spur and Helical Gear Teeth- Metric Edition Keyless Fits, Metric Edition Approved: 12/14/2018 Approved: 12/6/2017 William Bradley, AGMA; [email protected] William Bradley, AGMA; [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 17 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/AGMA 9104-2006 (R2017), Flexible AGSC-AGRSS (AUTO GLASS SAFETY ANSI/AHRI Standard 110-2012, Air- Couplings - Mass Elastic Properties and Other COUNCIL) Conditioning, Heating and Refrigerating Characteristics (Metric Edition) Equipment Nameplate Voltages Approved: 12/19/2017 ANSI/AGSC/AGRSS 004-2018, Auto Glass Safety Approved: 11/30/2012 William Bradley, AGMA; [email protected] Council/Automotive Glass Replacement Daniel Abbate, (703) 524-8800, [email protected] Safety Standard ANSI/AGMA 9110-A11-2011 (R2016), Flexible Approved: 8/23/2018 ANSI/AHRI Standard 1110 (I-P)-2013, Couplings - Potential Unbalance Classification Kathy Bimber, (540) 602-3263, [email protected] Performance Rating of Mechanical Transport (Metric Edition) Refrigeration Units Approved: 12/8/2016 AHAM (ASSOCIATION OF HOME Approved: 9/30/2013 William Bradley, AGMA; [email protected] APPLIANCE MANUFACTURERS) Daniel Abbate, (703) 524-8800, [email protected]

ANSI/AGMA 9112-B-2015, Bores and Keyways ANSI/AHAM AC-1-2015, Method for Measuring ANSI/AHRI Standard 1111 (SI)-2013, for Flexible Couplings (Metric Series) Performance of Portable Household Electric Performance Rating of Mechanical Transport Approved: 2/4/2015 Room Air Cleaners Refrigeration Units Approved: 5/13/2015 William Bradley, AGMA; [email protected] Approved: 9/30/2013 Matthew Williams, (202) 872-5955 x317, Daniel Abbate, (703) 524-8800, [email protected] ANSI/AGMA ISO 1328-1-2014, Cylindrical gears [email protected] - ISO system of flank tolerance classification - ANSI/AHRI Standard 1120-2012, Acoustical Test Part 1: Definitions and allowable values of ANSI/AHAM DW-1-2010, HOUSEHOLD ELECTRIC Methods and Sound Power Rating deviations relevant to flanks of gear teeth DISHWASHERS Procedures for Transport Refrigeration Approved: 9/30/2014 Approved: 9/10/2010 Equipment William Bradley, AGMA; [email protected] Matthew Williams, (202) 872-5955 x317, Approved: 12/6/2012 [email protected] Daniel Abbate, (703) 524-8800, [email protected] ANSI/AGMA ISO 14104-2017, Gears - Surface temper etch inspection after grinding, ANSI/AHAM PAC-1-2015, Portable Air ANSI/AHRI Standard 1140-2012, Sound Quality chemical method Conditioners Evaluation Procedures for Air-Conditioning Approved: 10/24/2018 Approved: 6/19/2015 and Refrigeration Equipment Matthew Williams, (202) 872-5955 x317, William Bradley, AGMA; [email protected] Approved: 11/29/2012 [email protected] Daniel Abbate, (703) 524-8800, [email protected] ANSI/AGMA ISO 17485-A-2008 (R2014), Bevel ANSI/AHAM RAC-1-2015, Room Air Gears - ISO System of Accuracy ANSI/AHRI Standard 1160 (I-P)-2014, Conditioners Approved: 3/12/2014 Performance Rating of Heat Pump Pool Approved: 5/13/2015 William Bradley, AGMA; [email protected] Heaters Matthew Williams, (202) 872-5955 x317, Approved: 11/19/2014 [email protected] ANSI/AGMA ISO 18653-2006, Gears - Evaluation Daniel Abbate, (703) 524-8800, [email protected] of Instruments for the Measurement of AHRI (AIR-CONDITIONING, HEATING, AND Individual Gears ANSI/AHRI Standard 1161 (SI)-2014, REFRIGERATION INSTITUTE) Approved: 9/29/2006 Performance Rating of Heat Pump Pool William Bradley, AGMA; [email protected] ANSI/AHRI 310/380-2014, Standard for Heaters Packaged Terminal Air-Conditioners and Heat Approved: 11/20/2014 ANSI/AGMA ISO 23509-B-2017, Bevel and Pumps Daniel Abbate, (703) 524-8800, [email protected] Hypoid Gear Geometry Approved: 4/15/2014 Approved: 12/12/2017 ANSI/AHRI Standard 1200 (I-P)-2013, Daniel Abbate, (703) 524-8800, [email protected] William Bradley, AGMA; [email protected] Performance Rating of Commercial ANSI/AHRI Standard 1060-2009, Performance Refrigerated Display Merchandisers and ANSI/AGMA ISO 6336-6-A-2008 (R2014), Rating of Air-to-Air Heat Exchangers for Storage Cabinets Calculation of Load Capacity of Spur and Energy Recovery Ventilation Equipment Approved: 10/1/2013 Helical Gears - Part 6: Calculation of Service Approved: 3/5/2009 Daniel Abbate, (703) 524-8800, [email protected] Life Under Variable Load Daniel Abbate, (703) 524-8800, [email protected] Approved: 3/11/2014 ANSI/AHRI Standard 1201 (SI)-2013, William Bradley, AGMA; [email protected] ANSI/AHRI Standard 1060 (I-P)-2014, Performance Rating of Commercial Performance Rating of Air-to-Air Exchangers Refrigerated Display Merchandisers and ANSI/AGMA/AWEA 6006-A03-2004 (R2016), for Energy Recovery Ventilation Equipment Storage Cabinets Standard for Design and Specifications of Approved: 10/1/2013 Approved: 5/15/2015 Gearboxes for Wind Turbines Daniel Abbate, (703) 524-8800, [email protected] Daniel Abbate, (703) 524-8800, [email protected] Approved: 6/29/2016 William Bradley, AGMA; [email protected] ANSI/AHRI Standard 1061 (SI)-2014, ANSI/AHRI Standard 1210 (I-P)-2011 with Performance Rating of Air-to-Air Exchangers Addendum 1, Performance Rating of Variable for Energy Recovery Ventilation Equipment Frequency Drives Approved: 10/1/2013 Approved: 5/19/2015 Daniel Abbate, (703) 524-8800, [email protected] Daniel Abbate, (703) 524-8800, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 18 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/AHRI Standard 1211-2011, Performance ANSI/AHRI Standard 1321-2011, Performance ANSI/AHRI Standard 250-2013, Performance Rating of Variable Frequency Drives Rating of Commercial Refrigerated Display and Calibration of Reference Sound Sources Approved: 4/17/2012 Merchandisers and Storage Cabinets for Use Approved: 4/16/2014 Daniel Abbate, (703) 524-8800, [email protected] with Secondary Refrigerants Daniel Abbate, (703) 524-8800, [email protected] Approved: 4/17/2012 ANSI/AHRI Standard 1211 (SI)-2011 with Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 260 (I-P)-2010, Sound Addendum 1, Performance Rating of Variable Rating of Ducted Air Moving and Frequency Drives ANSI/AHRI Standard 1330-2015, Performance Conditioning Equipment Approved: 10/1/2013 Rating for Radiant Output of Gas Fired Approved: 6/26/2013 Daniel Abbate, (703) 524-8800, [email protected] Infrared Heaters Daniel Abbate, (703) 524-8800, [email protected] Approved: 4/20/2015 ANSI/AHRI Standard 1230-2010, Performance Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 261 (SI)-2010, Sound Rating of Variable Refrigerant Flow (VRF) Rating of Ducted Air Moving and Multi-Split Air-Conditioning and Heat Pump ANSI/AHRI Standard 1350 (I-P)-2014, Conditioning Equipment Equipment Mechanical Performance Rating of Central Approved: 6/26/2013 Approved: 8/2/2010 Station Air-handling Unit Casings Daniel Abbate, (703) 524-8800, [email protected] Daniel Abbate, (703) 524-8800, [email protected] Approved: 5/19/2015 Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 270-2009, Sound ANSI/AHRI Standard 1250 (I-P)-2014, Performance Rating of Outdoor Unitary Performance Rating of Walk-In Coolers and ANSI/AHRI Standard 1351 (SI)-2015, Mechanical Equipment Freezers Performance Rating of Central Station Air- Approved: 12/11/2009 Approved: 5/19/2015 handling Unit Casings Daniel Abbate, (703) 524-8800, [email protected] Daniel Abbate, (703) 524-8800, [email protected] Approved: 5/19/2015 Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 275-2010, Application of ANSI/AHRI Standard 1251 (SI)-2014, Outdoor Unitary Equipment A-Weighted Performance Rating of Walk-In Coolers and ANSI/AHRI Standard 1360 (I-P)-2016, Sound Power Ratings Freezers Performance Rating of Computer and Data Approved: 1/4/2011 Approved: 5/19/2015 Processing Room Air Conditioners Daniel Abbate, (703) 524-8800, [email protected] Daniel Abbate, (703) 524-8800, [email protected] Approved: 7/8/2016 Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 280-2012, Requirements ANSI/AHRI Standard 1270 (I-P)-2015, for the Qualification of Reverberation Rooms Requirements for Seismic Qualification of ANSI/AHRI Standard 1361 (SI)-2016, in the 63 Hz Octave Band HVACR Equipment Performance Rating of Computer and Data Approved: 4/17/2012 Approved: 11/6/2015 Processing Room Air Conditioners Daniel Abbate, (703) 524-8800, [email protected] Daniel Abbate, (703) 524-8800, [email protected] Approved: 7/8/2016 Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 300-2015, Sound Rating ANSI/AHRI Standard 1271 (SI)-2015, and Sound Transmission Loss of Packaged Requirements for Seismic Qualification of ANSI/AHRI Standard 1500-2014, Method to Terminal Equipment HVACR Equipment Determine Efficiency of Commercial Space Approved: 7/8/2016 Approved: 11/6/2015 Heating Boilers Daniel Abbate, (703) 524-8800, [email protected] Daniel Abbate, (703) 524-8800, [email protected] Approved: 11/19/2014 Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 340/360 with Addenda 1 ANSI/AHRI Standard 1280-2015, Sound Power and 2-2011, Performance Rating of Rating of Water-cooled Chillers ANSI/AHRI Standard 210/240-2008 with Commercial and Industrial Unitary Air- Approved: 6/3/2015 Addenda 1 and 2-2011, Performance Rating Conditioning and Heat Pump Equipment Daniel Abbate, (703) 524-8800, [email protected] of Unitary Air-Conditioning & Air-Source Heat Approved: 10/27/2011 Pump Equipment Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 1300 (I-P)-2013, Approved: 1/15/2013 Performance Rating of Commercial Heat Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 350-2015, Sound Rating of Pump Water Heaters Non-ducted Indoor Air-conditioning Approved: 9/30/2013 ANSI/AHRI Standard 220-2015, Reverberation Equipment Daniel Abbate, (703) 524-8800, [email protected] Room Qualification and Testing Procedures Approved: 7/15/2016 for Determining Sound Power of HVAC Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 1301 (SI)-2013, Equipment Performance Rating of Commercial Heat Approved: 11/6/2015 ANSI/AHRI Standard 365-2010, Performance Pump Water Heaters Daniel Abbate, (703) 524-8800, [email protected] Rating of Commercial and Industrial Unitary Approved: 9/30/2013 Air-Conditioning Condensing Units Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 230-2013, Sound Intensity Approved: 1/4/2011 Testing Procedures for Determining Sound Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 1320-2011, Performance Power of HVAC Equipment Rating of Commercial Refrigerated Display Approved: 4/15/2014 ANSI/AHRI Standard 366-2010, Performance Merchandisers and Storage Cabinets for Use Daniel Abbate, (703) 524-8800, [email protected] Rating of Commercial and Industrial Unitary with Secondary Refrigerants Air-Conditioning Condensing Units Approved: 4/17/2012 Approved: 1/4/2011 Daniel Abbate, (703) 524-8800, [email protected] Daniel Abbate, (703) 524-8800, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 19 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/AHRI Standard 370-2015, Sound ANSI/AHRI Standard 495-2005, Performance ANSI/AHRI Standard 580-2014, Performance Performance Rating of Large Air-cooled Rating of Refrigerant Liquid Receivers Rating of Non-condensable Gas Purge Outdoor Refrigerating and Air-conditioning Approved: 5/20/2009 Equipment For Use with Low Pressure Equipment Daniel Abbate, (703) 524-8800, [email protected] Centrifugal Liquid Chillers Approved: 11/6/2015 Approved: 7/8/2016 Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 510-2006, Performance Daniel Abbate, (703) 524-8800, [email protected] Rating of Positive Displacement Ammonia ANSI/AHRI Standard 400 (I-P)-2015, Compressors and Compressor Units ANSI/AHRI Standard 610 (I-P)-2014, Performance Rating of Liquid to Liquid Heat Approved: 5/20/2009 Performance Rating of Central System Exchangers Daniel Abbate, (703) 524-8800, [email protected] Humidifiers for Residential Applications Approved: 11/6/2015 Approved: 11/19/2014 Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 530-2011, Rating of Sound Daniel Abbate, (703) 524-8800, [email protected] and Vibration for Refrigerant Compressors ANSI/AHRI Standard 400-2001, Addendum 2 Approved: 11/3/2011 ANSI/AHRI Standard 611 (SI)-2014, -2011, Liquid-to-Liquid Heat Exchangers Daniel Abbate, (703) 524-8800, [email protected] Performance Rating of Central System Approved: 6/10/2011 Humidifiers for Residential Applications Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 540 (I-P and SI)-2016, Approved: 11/19/2014 Performance Rating of Positive Displacement Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 401 (SI)-2015, Refrigerant Compressors and Compressor Performance Rating of Liquid to Liquid Heat Units ANSI/AHRI Standard 620 (I-P)-2014, Exchangers Approved: 4/7/2016 Performance Rating of Self-contained Approved: 11/6/2015 Daniel Abbate, (703) 524-8800, [email protected] Humidifiers for Residential Applications Daniel Abbate, (703) 524-8800, [email protected] Approved: 11/19/2014 ANSI/AHRI Standard 550/590 (I-P)-2012 with Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 420-2009, Performance Addendum 1, Performance Rating of Water- Rating of Forced-Circulation Free-Delivery Chilling and Heat Pump Water-Heating ANSI/AHRI Standard 621 (SI)-2014, Unit Coolers for Refrgeration Packages Using the Vapor Compression Cycle Performance Rating of Self-contained Approved: 12/11/2009 Approved: 6/12/2013 Humidifiers for Residential Applications Daniel Abbate, (703) 524-8800, [email protected] Daniel Abbate, (703) 524-8800, [email protected] Approved: 11/19/2014 Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 430-2010, Central Station ANSI/AHRI Standard 551/591-2011, Air-Handling Units Performance Rating of Water-Chilling and ANSI/AHRI Standard 640-2005, Performance Approved: 8/2/2010 Heat Pump Water-Heating Packages Using Rating of Commercial and Industrial Daniel Abbate, (703) 524-8800, [email protected] the Vapor Compression Cycle Humidifiers (formerly ANSI/AHRI 640-2005) Approved: 4/17/2012 Approved: 2/25/2009 ANSI/AHRI Standard 440-2009, Performance Daniel Abbate, (703) 524-8800, [email protected] Daniel Abbate, (703) 524-8800, [email protected] Rating of Room Fan-Coils Approved: 12/11/2009 ANSI/AHRI Standard 551/591 (SI) with ANSI/AHRI Standard 680 (I-P)-2015, Daniel Abbate, (703) 524-8800, [email protected] Addendum 1-2012, Performance Rating of Performance Rating of Residential Air Filter Water-Chilling and Heat Pump Water-Heating Equipment ANSI/AHRI Standard 460-2009, Performance Packages Using the Vapor Compression Cycle Approved: 7/8/2016 Rating of Remote Mechanical-Draft Air- Approved: 6/18/2013 Daniel Abbate, (703) 524-8800, [email protected] Cooled Refrigerant Condensers Daniel Abbate, (703) 524-8800, [email protected] Approved: 3/5/2009 ANSI/AHRI Standard 681 (SI)-2015, Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 570 (I-P)-2013, Performance Rating of Residential Air Filter Performance Rating of Remote Mechanical- Equipment ANSI/AHRI Standard 470-2006, Performance Draft Evaporatively-Cooled Refrigerant Approved: 7/8/2016 Rating of Desuperheater/Water Heaters Condensers Daniel Abbate, (703) 524-8800, [email protected] Approved: 5/20/2009 Approved: 6/12/2013 Daniel Abbate, (703) 524-8800, [email protected] Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 700 with Addenda 1 and 2 -2011, Specification for Fluorocarbon ANSI/AHRI Standard 490-2011, Performance ANSI/AHRI Standard 571 (SI)-2013, Refrigerants Rating of Remote Mechanical-Draft Performance Rating of Remote Mechanical- Approved: 8/4/2011 Evaporatively-Cooled Refrigerant Condensers Draft Evaporatively-Cooled Refrigerant Daniel Abbate, (703) 524-8800, [email protected] Approved: 4/17/2012 Condensers Daniel Abbate, (703) 524-8800, [email protected] Approved: 6/12/2013 ANSI/AHRI Standard 710 (I-P)-2010, Daniel Abbate, (703) 524-8800, [email protected] Performance Rating of Liquid-Line Driers ANSI/AHRI Standard 491-2011, Performance Approved: 8/2/2010 Rating of Remote Mechanical-Draft ANSI/AHRI Standard 575-2009, Method of Daniel Abbate, (703) 524-8800, [email protected] Evaporatively-Cooled Refrigerant Condensers Measuring Sound Within an Equipment Space Approved: 4/16/2012 Approved: 1/13/2010 ANSI/AHRI Standard 711 (SI)-2010, Daniel Abbate, (703) 524-8800, [email protected] Daniel Abbate, (703) 524-8800, [email protected] Performance Rating of Liquid-Line Driers Approved: 8/2/2010 Daniel Abbate, (703) 524-8800, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 20 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/AHRI Standard 715 (I-P)-2015, ANSI/AHRI Standard 771 (SI)-2014, ANSI/AHRI Standard 900 (I-P)-2015, Performance Rating of Liquid-Line Filters Performance Rating of Refrigerant Pressure Performance Rating of Thermal Storage Approved: 4/14/2015 Regulating Valves Equipment Used for Cooling Daniel Abbate, (703) 524-8800, [email protected] Approved: 5/19/2015 Approved: 11/13/2015 Daniel Abbate, (703) 524-8800, [email protected] Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 716 (SI)-2015, Performance Rating of Liquid-Line Filters ANSI/AHRI Standard 810 (I-P)-2013, ANSI/AHRI Standard 901 (SI)-2015, Approved: 4/14/2015 Performance Rating of Remote Mechanical- Performance Rating of Thermal Storage Daniel Abbate, (703) 524-8800, [email protected] Draft Evaporatively-Cooled Refrigerant Equipment Used for Cooling Condensers Approved: 11/13/2015 ANSI/AHRI Standard 730 (I-P)-2013, Flow Approved: 6/12/2013 Daniel Abbate, (703) 524-8800, [email protected] Capacity Rating of Suction-Line Filters and Daniel Abbate, (703) 524-8800, [email protected] Suction-Line Filter-Driers ANSI/AHRI Standard 901-2010, Performance Approved: 4/15/2014 ANSI/AHRI Standard 811 (SI)-2013, Rating of Thermal Storage Equipment Used Daniel Abbate, (703) 524-8800, [email protected] Performance Rating of Remote Mechanical- for Cooling Draft Evaporatively-Cooled Refrigerant Approved: 1/4/2011 ANSI/AHRI Standard 731 (SI)-2013, Flow Condensers Daniel Abbate, (703) 524-8800, [email protected] Capacity Rating of Suction-Line Filters and Approved: 6/12/2013 Suction-Line Filter-Driers Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 910-2011, Performance Approved: 4/15/2014 Rating of Indoor Pool Dehumidifiers Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 820 (I-P)-2012, Approved: 4/17/2012 Performance Rating of Ice Storage Bins Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 740-2015, Performance Approved: 11/30/2012 Rating of Refrigerant Recovery Equipment Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 910 (I-P)-2014, and Recovery/Recycling Equipment Performance Rating of Indoor Pool Approved: 11/6/2015 ANSI/AHRI Standard 821 (SI)-2012, Dehumidifiers Daniel Abbate, (703) 524-8800, [email protected] Performance Rating of Ice Storage Bins Approved: 9/27/2016 Approved: 11/30/2012 Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 750-2007, Performance Daniel Abbate, (703) 524-8800, [email protected] Rating of Thermostatic Refrigerant Expansion ANSI/AHRI Standard 911 (SI)-2014, Valves ANSI/AHRI Standard 850 (I-P)-2013 Performance Rating of Indoor Pool Approved: 5/20/2009 , Performance Rating of Commercial and Dehumidifiers Daniel Abbate, (703) 524-8800, [email protected] Industrial Air Filter Equipment Approved: 7/8/2016 Approved: 4/16/2014 Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 760-2007, Performance Daniel Abbate, (703) 524-8800, [email protected] Rating of Solenoid Valves for Use with ANSI/AHRI Standard 920 (I-P)-2015, Volatile Refrigerants ANSI/AHRI Standard 851 (SI)-2013, Performance Rating of DX-Dedicated Approved: 5/20/2009 Performance Rating of Commercial and Outdoor Air System Units Daniel Abbate, (703) 524-8800, [email protected] Industrial Air Filter Equipment Approved: 11/6/2015 Approved: 4/15/2014 Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 760 (I-P)-2014, Daniel Abbate, (703) 524-8800, [email protected] Performance Rating of Solenoid Valves for ANSI/AHRI Standard 921 (SI)-2015, Use with Volatile Refrigerants ANSI/AHRI Standard 870-2009, Performance Performance Rating of DX-Dedicated Approved: 5/15/2015 Rating of Direct Geoexchange Heat Pumps Outdoor Air System Units Daniel Abbate, (703) 524-8800, [email protected] Approved: 3/5/2009 Approved: 11/6/2015 Daniel Abbate, (703) 524-8800, [email protected] Daniel Abbate, (703) 524-8800, [email protected] ANSI/AHRI Standard 761 (SI)-2014, Performance Rating of Solenoid Valves for ANSI/AHRI Standard 880 (I-P)-2011 with ANSI/AHRI/ASHRAE ISO Standard 13256-1 Use with Volatile Refrigerants Addendum 1-2011, Performance Rating of Air -2011, Water-source heat pumps - testing Approved: 5/15/2015 Terminals and rating for performance - Part 1: Water- Daniel Abbate, (703) 524-8800, [email protected] Approved: 11/29/2012 to-air and brine-to-air heat pumps Daniel Abbate, (703) 524-8800, [email protected] Approved: 11/3/2011 ANSI/AHRI Standard 770-2007, Refrigerant Daniel Abbate, (703) 524-8800, [email protected] Pressure Regulating Valves ANSI/AHRI Standard 881 (SI), Adm1-2012 , Approved: 5/20/2009 Performance Rating of Air Terminals ANSI/AHRI/ASHRAE ISO Standard 13256-2 Daniel Abbate, (703) 524-8800, [email protected] Approved: 12/6/2012 -2011, Water-source heat pumps - testing Daniel Abbate, (703) 524-8800, [email protected] and rating for performance - Part 2: Water- ANSI/AHRI Standard 770 (I-P)-2014, to-water and brine-to-water heat pumps Performance Rating of Refrigerant Pressure ANSI/AHRI Standard 900-2010, Performance Approved: 11/3/2011 Regulating Valves Rating of Thermal Storage Equipment Used Daniel Abbate, (703) 524-8800, [email protected] Approved: 5/19/2015 for Cooling Daniel Abbate, (703) 524-8800, [email protected] Approved: 1/4/2011 Daniel Abbate, (703) 524-8800, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 21 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

AIAA (AMERICAN INSTITUTE OF ANSI/AIAA S-102.2.4-2015, Capability-Based ANSI/AISC 358-S1-2018, Supplement No. 1 to AERONAUTICS AND ASTRONAUTICS) Product Failure Mode, Effects and Criticality AISC 358-16 Prequalified Connections for Analysis (FMECA) Requirements Special and Intermediate Steel Moment ANSI/AIAA G-034A-2014 (R2019), Guide to Approved: 8/14/2015 Frames for Seismic Applications Reference and Standard Ionosphere Models Hillary Woehrle, (703) 264-7546, [email protected] Approved: 7/26/2018 Approved: 8/9/2019 Janet Cummins Hillary Woehrle, (703) 264-7546, [email protected] ANSI/AIAA S-115-2013 (R2017), LEO Spacecraft Charging Design Standard and Handbook ANSI/AISC 360-2016, Specification for Structural ANSI/AIAA G-043B-2018, Guide for the Approved: 9/20/2017 Steel Buildings Preparation of Operational Concept Hillary Woehrle, (703) 264-7546, [email protected] Approved: 7/7/2016 Documents Janet Cummins Approved: 5/3/2018 ANSI/AIAA S-119-2011 (R2016), Flight Dynamics Hillary Woehrle, (703) 264-7546, [email protected] Model Exchange Standard ANSI/AISC N690-2018, Specification for Safety- Approved: 9/1/2016 Related Steel Structures for Nuclear Facilities ANSI/AIAA G-095A-2017, Guide to Safety of Hillary Woehrle, (703) 264-7546, [email protected] Approved: 6/28/2018 Hydrogen and Hydrogen Systems Janet Cummins Approved: 12/11/2017 ANSI/AIAA-S-120A-2015 (R2019), Mass Hillary Woehrle, (703) 264-7546, [email protected] Properties Control for Space Systems ANSI/AISC N690, Supplement 1-2015, Approved: 7/31/2019 Specification for Safety-Related Steel ANSI/AIAA S-017B-2015 (R2019), Aerodynamic Hillary Woehrle, (703) 264-7546, [email protected] Structures for Nuclear Facilities Decelerator and Parachute Drawings Approved: 8/11/2015 Approved: 8/9/2019 ANSI/AIAA S-123-2007 (R2017), Adaptions and Janet Cummins Hillary Woehrle, (703) 264-7546, [email protected] Conversions of CCSDS Space Link Extension Forward Communications Link Transmission AISI (AMERICAN IRON AND STEEL ANSI/AIAA S-080A-2018, Space Systems - Unit Transfer Service INSTITUTE) Metallic Pressure Vessels, Pressurized Approved: 9/20/2017 Structures, and Pressure Components Hillary Woehrle, (703) 264-7546, [email protected] ANSI/AISI S100-2016, North American Approved: 3/20/2018 Specification for the Design of Cold-Formed Hillary Woehrle, (703) 264-7546, [email protected] ANSI/AIAA S-124-2007 (R2017), Adaptions and Steel Structural Members Conversions of CCSDS Space Link Extension Approved: 8/5/2016 ANSI/AIAA S-081B-2018, Space Systems - Return All Frames Transfer Service Helen Chen, (202) 452-7100, [email protected] Composite Overwrapped Pressure Vessels Approved: 9/20/2017 Approved: 3/20/2018 Hillary Woehrle, (703) 264-7546, [email protected] ANSI/AISI S100-2016/S1-2018, Supplement 1 to Hillary Woehrle, (703) 264-7546, [email protected] North American Specification for the Design ANSI/AIAA S-131-2011 (R2016), Astrodynamics of Cold-Formed Steel Structural Members ANSI/AIAA S-102-1-4-2019, Performance-Based - Propagation Specifications, Technical Approved: 12/11/2018 Failure Reporting, Analysis & Corrective Definitions, and Recommended Practices Helen Chen, (202) 452-7100, [email protected] Action System (FRACAS) Requirements Approved: 9/1/2016 Approved: 3/14/2019 Hillary Woehrle, (703) 264-7546, [email protected] ANSI/AISI S110-2007 & S1-2009 (R2012), Hillary Woehrle, (703) 264-7546, [email protected] Standard for Seismic Design of Cold-Formed ANSI/AIAA S-142-2016, Standard/Handbook for Steel Structural Systems - Special Bolted ANSI/AIAA S-102-1-5-2019, Performance-Based Multipactor Breakdown Prevention in Moment Frames including Supplement No. 1, Failure Review Board (FRB) Requirements Spacecraft Components 2007 Edition, (2012) Approved: 3/14/2019 Approved: 10/21/2016 Approved: 11/29/2012 Hillary Woehrle, (703) 264-7546, [email protected] Hillary Woehrle, (703) 264-7546, [email protected] Helen Chen, (202) 452-7100, [email protected]

ANSI/AIAA S-102-2-11-2019, Performance- AISC (AMERICAN INSTITUTE OF STEEL ANSI/AISI S201-2017, North American Standard Based Anomaly Detection and Response CONSTRUCTION) for Cold-Formed Steel Framing - Product Data Analysis Approved: 3/29/2018 Approved: 3/14/2019 ANSI/AISC 303-2016, Code of Standard Practice Helen Chen, (202) 452-7100, [email protected] Hillary Woehrle, (703) 264-7546, [email protected] for Steel Buildings and Bridges Approved: 6/15/2016 ANSI/AISI S202-2015, Code of Standard Practice ANSI/AIAA S-102-2-18-2019, Performance- Janet Cummins for Cold-Formed Steel Structural Framing Based Fault Tree Analysis Requirements Approved: 8/20/2015 Approved: 3/14/2019 ANSI/AISC 341-2016, Seismic Provisions for Helen Chen, (202) 452-7100, [email protected] Hillary Woehrle, (703) 264-7546, [email protected] Structural Steel Buildings Approved: 7/12/2016 ANSI/AISI S220-2015, North American Standard ANSI/AIAA S-102-2-2-2019, Performance-Based Janet Cummins for Cold-Formed Steel Framing - System Reliability Modeling Requirements Nonstructural Members Approved: 3/14/2019 ANSI/AISC 358-2016, Prequalified Connections Approved: 10/21/2015 Hillary Woehrle, (703) 264-7546, [email protected] for Special and Intermediate Steel Moment Helen Chen, (202) 452-7100, [email protected] Frames for Seismic Applications Approved: 5/12/2016 Janet Cummins

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 22 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/AISI S230-2019, North American Standard ANSI/AISI S905-2008/S1-2012, Supplement 1 to ANSI/AISI S914-2017, Test Standard for for Cold-Formed Steel Framing - Prescriptive Test Methods for Mechanically Fastened Determining the Strength and Deformation Method for One- and Two-Family Dwellings Cold-Formed Steel Connections Behavior of Joist Connectors Attached to Approved: 4/30/2019 Approved: 3/2/2012 Cold-Formed Steel Structural Framing Helen Chen, (202) 452-7100, [email protected] Helen Chen, (202) 452-7100, [email protected] Approved: 3/29/2018 Helen Chen, (202) 452-7100, [email protected] ANSI/AISI S240-2015, North American Standard ANSI/AISI S906-2017, Test Standard for for Cold-Formed Steel Structural Framing Determining the Load-Carrying Strength of ANSI/AISI S915-2015, Test Standard for Approved: 10/22/2015 Panels and Anchor-to-Panel Attachments for Through-the-Web Punchout Cold-Formed Helen Chen, (202) 452-7100, [email protected] Roof or Siding Systems Tested in Accordance Steel Wall Stud Bridging Connectors With ASTM E1592 Approved: 8/19/2015 ANSI/AISI S310-2016, North American Standard Approved: 3/29/2018 Helen Chen, (202) 452-7100, [email protected] for the Design of Profiled Steel Diaphragm Helen Chen, (202) 452-7100, [email protected] Panels ANSI/AISI S916-2015, Test Standard for Cold- Approved: 8/19/2015 ANSI/AISI S907-2017, Test Standard for Formed Steel Framing - Nonstructural Helen Chen, (202) 452-7100, [email protected] Determining the Strength and Stiffness of Interior Partitions with Gypsum Board Cold-Formed Steel Diaphragms by the Approved: 8/19/2015 ANSI/AISI S400-2015, North American Standard Cantilever Test Method Helen Chen, (202) 452-7100, [email protected] for Seismic Design of Cold-Formed Steel Approved: 3/29/2018 Structural Systems Helen Chen, (202) 452-7100, [email protected] ANSI/AISI S917-2017, Test Standard for Approved: 12/1/2015 Determination of Fastener-Sheathing Local Helen Chen, (202) 452-7100, [email protected] ANSI/AISI S908-2017, Test Standard for Translational Stiffness Determining the Flexural Strength Reduction Approved: 10/11/2016 ANSI/AISI S400-15/S1-2016, Supplement 1 to Factor of PurlinsSupporting a Standing Seam Helen Chen, (202) 452-7100, [email protected] the North American Standard for Seismic Roof System Design of Cold-Formed Steel Structural Approved: 3/29/2018 ANSI/AISI S918-2017, Test Standard for Systems Helen Chen, (202) 452-7100, [email protected] Determination of Fastener-Sheathing Approved: 8/5/2016 Rotational Stiffness Helen Chen, (202) 452-7100, [email protected] ANSI/AISI S909-2017, Test Standard for Approved: 10/11/2016 Determining the Web Crippling Strength of Helen Chen, (202) 452-7100, [email protected] ANSI/AISI S901-2017, Test Standard for Cold-Formed Steel Flexural Members Determining the Rotational-Lateral Stiffness Approved: 3/29/2018 ANSI/AISI S919-2017, Test Standard for of Beam-to-Panel Assemblies Helen Chen, (202) 452-7100, [email protected] Determining the Flexural Strength and Approved: 3/29/2018 Stiffness of Cold-Formed Steel Nonstructural Helen Chen, (202) 452-7100, [email protected] ANSI/AISI S910-2017, Test Standard for Members Determining the Distortional Buckling Approved: 3/29/2018 ANSI/AISI S902-2017, Test Standard for Strength of Cold-Formed Steel Hat-Shaped Helen Chen, (202) 452-7100, [email protected] Determining the Effective Area of Cold- Compression Members Formed Steel Compression Members Approved: 3/29/2018 ALI (AUTOMOTIVE LIFT INSTITUTE) Approved: 3/29/2018 Helen Chen, (202) 452-7100, [email protected] ANSI/ALI ALCTV-2017, Standard for Automotive Helen Chen, (202) 452-7100, [email protected] ANSI/AISI S911-2017, Test Standard for Lifts - Safety Requirements for Construction, ANSI/AISI S903-2017, Test Standard for Determining the Flexural Strength of Cold- Testing and Validation Determining the Uniform and Local Ductility Formed Steel Hat-Shaped Members Approved: 1/24/2017 of Carbon and Low-Alloy Steels Approved: 3/29/2018 Heather Almeida, (607) 756-7775, heather@autolift. org Approved: 3/29/2018 Helen Chen, (202) 452-7100, [email protected] Helen Chen, (202) 452-7100, [email protected] ANSI/AISI S912-2017, Test Standard for ANSI/ALI ALIS:2009 (R2015), Standard for ANSI/AISI S904-2017, Test Standard for Determining the Strength of a Roof Panel-to- Automotive Lifts - Safety Requirements for Determining the Tensile and Shear Strengths Purlin-to-Anchorage Device Connection Installation and Service Approved: 12/15/2015 of Steel Screws Approved: 3/29/2018 Heather Almeida, (607) 756-7775, heather@autolift. Approved: 3/29/2018 Helen Chen, (202) 452-7100, [email protected] org Helen Chen, (202) 452-7100, [email protected] ANSI/AISI S913-2017, Test Standard for ANSI/ALI ALOIM-2008 (R2013), Standard for ANSI/AISI S905-2017, Test Standard for Determining the Strength and Deformation Automotive Lifts - Safety Requirements for Determining the Strength and Deformation Behavior of Hold-Downs Attached to Cold- Operation, Inspection, and Maintenance Characteristics of Cold-Formed Steel Formed Steel Structural Framing Approved: 12/4/2013 Connections Approved: 3/29/2018 Heather Almeida, (607) 756-7775, heather@autolift. Approved: 3/29/2018 Helen Chen, (202) 452-7100, [email protected] org Helen Chen, (202) 452-7100, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 23 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ALI (ASC A14) (AMERICAN LADDER ANSI/AMCA 208-2018, Calculation of Fan ANSI/AMCA 99-2016, Standards Handbook INSTITUTE) Energy Index Approved: 11/10/2016 Approved: 1/24/2018 John Pakan, (847) 704-6295, [email protected] ANSI A14.1-2018, Portable Wood Ladders John Pakan, (847) 704-6295, [email protected] Approved: 8/23/2018 ANSI/AMCA Standard 205-2019, Energy Janet Rapp, (312) 673-5769, jrapp@smithbucklin. ANSI/AMCA 210-2016, ANSI/ASHRAE 51- 2016, Efficiency Classification for Fans com; [email protected] Laboratory Methods of Testing Fans for Approved: 5/3/2019 Aerodynamic Performance Rating John Pakan, (847) 704-6295, [email protected] ANSI A14.11-2018, Stepstools Approved: 8/26/2016 Approved: 6/15/2018 John Pakan, (847) 704-6295, [email protected] ANSI/AMCA Standard 300-2014, Reverberant Janet Rapp, (312) 673-5769, jrapp@smithbucklin. Room Methods for Sound Testing of Fans com; [email protected] ANSI/AMCA 220-2005 (R2012), Laboratory Approved: 8/14/2014 Methods of Testing Air Curtain Units for John Pakan, (847) 704-6295, [email protected] ANSI A14.2-2017, Standard For Ladders - Aerodynamic Performance Rating Portable Metal - Safety Requirements Approved: 3/29/2012 ANSI/AMCA Standard 301-2014, Methods for Approved: 12/12/2017 John Pakan, (847) 704-6295, [email protected] Calculating Fan Sound Ratings from Janet Rapp, (312) 673-5769, jrapp@smithbucklin. Laboratory Test Data com; [email protected] ANSI/AMCA 230-2015, Laboratory Methods of Approved: 8/14/2014 Testing Air Circulating Fans for Rating and John Pakan, (847) 704-6295, [email protected] ANSI A14.3-2008 (R2018), Standard for Ladders Certification - Fixed - Safety Requirements Approved: 10/16/2015 ANSI/AMCA Standard 500-L-2015, Laboratory Approved: 10/5/2018 John Pakan, (847) 704-6295, [email protected] Methods of Testing Louvers for Rating Janet Rapp, (312) 673-5769, jrapp@smithbucklin. Approved: 12/3/2015 com; [email protected] ANSI/AMCA 240-2015, Laboratory Methods of John Pakan, (847) 704-6295, [email protected] Testing Positive Pressure Ventilators for ANSI A14.4-2018, Job Made Ladders Aerodynamic Performance Rating ANSI/AMCA Standard 610-2019, Laboratory Approved: 10/18/2018 Approved: 5/8/2015 Methods of Testing Airflow Measurement Janet Rapp, (312) 673-5769, jrapp@smithbucklin. John Pakan, (847) 704-6295, [email protected] Stations for Performance Rating com; [email protected] Approved: 4/9/2019 ANSI/AMCA 250-2012, Laboratory Methods of ANSI A14.5-2017, Reinforced Plastic Ladders John Pakan, (847) 704-6295, [email protected] Testing Jet Tunnel Fans for Rating Approved: 12/12/2017 Approved: 2/22/2012 AMCI (AMC INSTITUTE) Janet Rapp, (312) 673-5769, jrapp@smithbucklin. John Pakan, (847) 704-6295, [email protected] com; [email protected] ANSI/AMCi A100.1-2018, The Standard of Good ANSI/AMCA 260-2013, Laboratory Methods of Practices for Association Management ANSI A14.7-2012, Mobile Ladder Stands & Companies Mobile Ladder Stand Platforms Testing Induced Flow Fans for Rating Approved: 11/4/2013 Approved: 12/19/2018 Approved: 1/18/2012 John Pakan, (847) 704-6295, [email protected] Janet Rapp, (312) 673-5769, jrapp@smithbucklin. AMERICANHORT (AMERICANHORT) com; [email protected] ANSI/AMCA 320-2013, Laboratory Method of ANSI Z60.1-2014, Standard for Nursery Stock Sound Testing of Fans Using Sound Intensity ANSI A14.8-2013, Safety Requirements for Approved: 4/14/2014 Approved: 9/17/2013 Ladder Accessories Warren Quinn, (410) 382-5569, [email protected] Approved: 5/10/2013 John Pakan, (847) 704-6295, [email protected] Janet Rapp, (312) 673-5769, jrapp@smithbucklin. ANS (AMERICAN NUCLEAR SOCIETY) ANSI/AMCA 500-D-2012, Laboratory Methods com; [email protected] of Testing Dampers for Rating ANSI/ANS 1-2000 (R2019), Conduct of Critical ANSI A14.9-2019, Requirements for Approved: 3/29/2012 Experiments Disappearing Attic Stairs John Pakan, (847) 704-6295, [email protected] Approved: 8/12/2019 Approved: 2/15/2019 [email protected] ANSI/AMCA 500-D-2018, BSR/AMCA 500-D XX Janet Rapp, (312) 673-5769, jrapp@smithbucklin. com; [email protected] Laboratory Methods of Testing Dampers for ANSI/ANS 10.4-2008 (R2016), Verification and Rating Validation of Non-Safety-Related Scientific AMCA (AIR MOVEMENT AND CONTROL Approved: 12/6/2018 and Engineering Computer Programs for the ASSOCIATION) John Pakan, (847) 704-6295, [email protected] Nuclear Industry Approved: 9/26/2016 ANSI/AMCA 204-2005 (R2012), Balance Quality ANSI/AMCA 540-2013, Test Method for Louvers [email protected] and Vibration Levels for Fans Impacted by Wind Borne Debris Approved: 3/28/2012 Approved: 6/14/2013 ANSI/ANS 10.5-2006 (R2016), Accommodating John Pakan, (847) 704-6295, [email protected] John Pakan, (847) 704-6295, [email protected] User Needs in Scientific and Engineering Computer Software Development ANSI/AMCA 207-2017, Fan System Efficiency ANSI/AMCA 550-2018, Test Method for High Approved: 12/8/2016 and Fan System Input Power Calculation Velocity Wind Driven Rain Resistant Louvers [email protected] Approved: 4/17/2017 Approved: 9/20/2018 John Pakan, (847) 704-6295, [email protected] John Pakan, (847) 704-6295, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 24 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ANS 10.7-2013 (R2018), Non-Real-Time, ANSI/ANS 18.1-2016, Radioactive Source Term ANSI/ANS 2.17-2010 (R2016), Evaluation of High-Integrity Software for the Nuclear for Normal Operation of Light Water Subsurface Radionuclide Transport at Industry - Developer Requirements Reactors Commercial Nuclear Power Plants Approved: 8/13/2018 Approved: 11/1/2016 Approved: 3/10/2016 [email protected] [email protected] [email protected]

ANSI/ANS 10.8-2015, Non-Real-Time, High- ANSI/ANS 19.1-2019, Nuclear Data Sets for ANSI/ANS 2.2-2016, Earthquake Integrity Software for the Nuclear Industry Reactor Design Calculations Instrumentation Criteria for Nuclear Power Approved: 11/19/2015 Approved: 3/8/2019 Plants [email protected] [email protected] Approved: 7/14/2016 [email protected] ANSI/ANS 14.1-2004 (R2019), Operation of Fast ANSI/ANS 19.10-2009 (R2016), Methods for Pulse Reactors Determining Neutron Fluence in BWR and ANSI/ANS 2.21-2012 (R2016), Criteria for Approved: 8/12/2019 PWR Pressure Vessel and Reactor Assessing Atmospheric Effects on the [email protected] InternalsANSI/ANS-19.10-2009 Ultimate Heat Sink Approved: 10/11/2016 Approved: 4/18/2016 ANSI/ANS 15.1-2007 (R2018), The Development [email protected] [email protected] of Technical Specifications for Research Reactors ANSI/ANS 19.11-2017, Calculation and ANSI/ANS 2.23-2016, Nuclear Power Plant Approved: 4/10/2018 Measurement of the Moderator Response to an Earthquake [email protected] Temperature Coefficient of Reactivity for Approved: 4/7/2016 Pressurized Water Reactors [email protected] ANSI/ANS 15.11-2016, Radiation Protection at Approved: 4/11/2017 Research Reactors [email protected] ANSI/ANS 2.26-2004 (R2017), Categorization of Approved: 5/13/2016 Nuclear Facility Structures, Systems, and [email protected] ANSI/ANS 19.3-2011 (R2017), Steady-State Components for Seismic Design Neutronics Methods for Power Reactor Approved: 9/12/2017 ANSI/ANS 15.16-2015, Emergency Planning for Analysis [email protected] Research Reactors Approved: 1/24/2017 Approved: 2/11/2015 [email protected] ANSI/ANS 2.27-2008 (R2016), Criteria for [email protected] Investigations of Nuclear Facility Sites for ANSI/ANS 19.3.4-2002 (R2017), The Seismic Hazard Assessments ANSI/ANS 15.2-1999 (R2016), Quality Control Determination of Thermal Energy Deposition Approved: 6/15/2016 for Plate-Type Uranium-Aluminum Fuel Rates in Nuclear Reactors [email protected] Elements Approved: 5/18/2017 Approved: 8/18/2016 [email protected] ANSI/ANS 2.29-2008 (R2016), Probabilistic [email protected] Seismic Hazard Analysis ANSI/ANS 19.4-2017, A Guide for Acquisition Approved: 10/11/2016 ANSI/ANS 15.21-2012 (R2018), Format and and Documentation of Reference Power [email protected] Content for Safety Analysis Reports for Reactor Physics Measurements for Nuclear Research Reactors Analysis Verification ANSI/ANS 2.3-2011 (R2016), Estimating Approved: 2/27/2018 Approved: 8/24/2017 Tornado, Hurricane, and Extreme Straight [email protected] [email protected] Line Wind Characteristics at Nuclear Facility Sites ANSI/ANS 15.4-2016, Selection and Training of ANSI/ANS 19.6.1-2011 (R2016), Reload Startup Approved: 6/29/2016 Personnel for Research Reactors Physics Tests for Pressurized Water Reactors [email protected] Approved: 4/19/2016 Approved: 8/5/2016 [email protected] [email protected] ANSI/ANS 2.30-2015, Criteria for Assessing Tectonic Surface Fault Rupture and ANSI/ANS 15.8-1995 (R2018), Quality Assurance ANSI/ANS 2.10-2017, Criteria for Retrieval, Deformation at Nuclear Facilities Program Requirements for Research Reactors Processing, Handling, and Storage of Records Approved: 5/26/2015 Approved: 7/18/2018 from Nuclear Facility Seismic Instrumentation [email protected] [email protected] Approved: 12/19/2017 [email protected] ANSI/ANS 2.6-2018, Guidelines for Estimating ANSI/ANS 16.1-2019, Measurement of the Present and Forecasting Future Population Leachability of Solidified Low-Level ANSI/ANS 2.15-2013 (R2017), Criteria for Distributions Surrounding Nuclear Facility Radioactive Wastes by a Short-Term Test Modeling and Calculating Atmospheric Sites Procedure Dispersion of Routine Radiological Releases Approved: 3/16/2018 Approved: 2/22/2019 from Nuclear Facilities [email protected] [email protected] Approved: 12/21/2017 [email protected] ANSI/ANS 3.1-2014, Selection, Qualification, and Training of Personnel for Nuclear Power Plants Approved: 11/20/2014 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 25 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ANS 3.11-2015, Determining ANSI/ANS 57.1-1992 (R2015), Design ANSI/ANS 6.3.1-1987 (R2015), Program for Meteorological Information at Nuclear Requirements for Light Water Reactor Fuel Testing Radiation Shields in Light Water Facilities Handling Systems Reactors (LWR) Approved: 8/20/2015 Approved: 6/16/2015 Approved: 12/11/2015 [email protected] [email protected] [email protected]

ANSI/ANS 3.2-2012 (R2017), Managerial, ANSI/ANS 57.10-1996 (R2016), Design Criteria ANSI/ANS 6.4-2006 (R2016), Nuclear Analysis Administrative, and Quality Assurance for Consolidation of LWR Spent Fuel and Design of Concrete Radiation Shielding Controls for the Operational Phase of Nuclear Approved: 7/7/2016 for Nuclear Power Plants Power Plants [email protected] Approved: 8/4/2016 Approved: 4/4/2017 [email protected] [email protected] ANSI/ANS 57.3-2018, Design Requirements for New Fuel Storage Facilities at Light Water ANSI/ANS 6.4.2-2006 (R2016), Specification for ANSI/ANS 3.4-2013 (R2018), Medical Reactor Plants Radiation Shielding Materials Certification and Monitoring of Personnel Approved: 2/27/2018 Approved: 9/23/2016 Requiring Operator Licenses for Nuclear [email protected] [email protected] Power Plants Approved: 7/2/2018 ANSI/ANS 57.8-1995 (R2017), Fuel Assembly ANSI/ANS 6.6.1-2015, Calculation and [email protected] Identification Measurement of Direct and Scattered Approved: 2/23/2017 Radiation from LWR Nuclear Power Plants ANSI/ANS 40.37-2009 (R2016), Mobile Low- [email protected] Approved: 8/21/2015 Level Radioactive Waste Processing Systems [email protected] Approved: 6/30/2016 ANSI/ANS 58.14-2011 (R2017), Safety and [email protected] Pressure Integrity Classification Criteria for ANSI/ANS 8.1-2014 (R2018), Nuclear Criticality Light Water Reactors Safety in Operations with Fissionable ANSI/ANS 41.5-2012 (R2018), Verification and Approved: 1/12/2017 Material Outside Reactors Validation of Radiological Data for Use in [email protected] Approved: 11/29/2018 Waste Management and Environmental [email protected] Remediation ANSI/ANS 58.16-2014, Safety Categorization Approved: 10/19/2018 and Design Criteria for Non-Reactor Nuclear ANSI/ANS 8.10-2015, Criteria for Nuclear [email protected] Facilities Criticality Safety Controls in Operations With Approved: 9/4/2014 Shielding and Confinement ANSI/ANS 5.1-2014 (R2019), Decay Heat Power [email protected] Approved: 2/12/2015 in Light Water Reactors [email protected] Approved: 2/5/2019 ANSI/ANS 58.8-2019, Time Response Criteria [email protected] for Manual Actions at Nuclear Power Plants ANSI/ANS 8.12-1987 (R2016), Nuclear Criticality Approved: 8/8/2019 Control and Safety of Plutonium-Uranium ANSI/ANS 5.10-1998 (R2012), Airborne Release [email protected] Fuel Mixtures Outside Reactors Fractions at Non-Reactor Nuclear Facilities Approved: 5/6/2016 Approved: 1/15/2013 ANSI/ANS 58.9-2002 (R2015), Single Failure [email protected] [email protected] Criteria for Light Water Reactor Safety- Related Fluid Systems ANSI/ANS 8.14-2004 (R2016), Use of Soluble ANSI/ANS 51.10-1991 (R2018), Auxiliary Approved: 2/12/2015 Neutron Absorbers in Nuclear Facilities Feedwater System For Pressurized Water [email protected] Outside Reactors Reactors Approved: 6/29/2016 Approved: 8/13/2018 ANSI/ANS 59.51-1997 (R2015), Systems [email protected] [email protected] for Safety-Related Emergency Diesel Generators ANSI/ANS 8.15-2014, Nuclear Criticality Control ANSI/ANS 53.1-2011 (R2016), Nuclear Safety Approved: 6/19/2015 of Selected Actinide Nuclides Design Process for Modular Helium-Cooled [email protected] Approved: 10/10/2014 Reactor Plants [email protected] Approved: 10/31/2016 ANSI/ANS 59.52-1998 (R2015), Lubricating Oil [email protected] Systems for Safety-Related Emergency Diesel ANSI/ANS 8.17-2004 (R2014), Criticality Safety Generators Criteria for the Handling, Storage and ANSI/ANS 55.1-1992 (R2017), Solid Radioactive Approved: 6/19/2015 Transportation of LWR Fuel Outside Reactors Waste Processing System for Light-Water- [email protected] Approved: 7/28/2014 Cooled Reactor Plants [email protected] Approved: 8/24/2017 ANSI/ANS 6.1.2-2013 (R2018), Neutron and [email protected] Gamma-Ray Cross Sections for Nuclear ANSI/ANS 8.19-2014 (R2019), Administrative Radiation Protection Calculations for Nuclear Practices for Nuclear Criticality Safety ANSI/ANS 56.8-2002 (R2016), Containment Power Plants Approved: 8/22/2019 System Leakage Test Requirements Approved: 10/19/2018 [email protected] Approved: 5/26/2016 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 26 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ANS 8.20-1991 (R2015), Nuclear Criticality APA (APA - THE ENGINEERED WOOD ANSI/APCO 1.103.2-2013, Wireless 9-1-1 Safety Training ASSOCIATION) Deployment & Management Effective Approved: 8/3/2015 Practices Guide [email protected] ANSI 405-2018, Standard for Adhesives for Use Approved: 9/27/2013 in Structural Glued Laminated Timber Crystal McDuffie, (919) 625-6864, ANSI/ANS 8.21-1995 (R2019), Use of Fixed Approved: 12/12/2017 [email protected]; [email protected] Neutron Absorbers in Nuclear Facilities Borjen Yeh, (253) 620-7467, borjen.yeh@apawood. Outside Reactors org ANSI/APCO 1.107.1-2015, Standard for the Approved: 4/9/2019 Establishment of a Quality Assurance and ANSI A190.1-2017, Standard for wood products [email protected] Quality Improvement Program for Public - Structural Glued Laminated Timber Safety Answering Points ANSI/ANS 8.22-1997 (R2016), Nuclear Criticality Approved: 1/24/2017 Approved: 4/2/2015 Safety Based on Limiting and Controlling Borjen Yeh, (253) 620-7467, borjen.yeh@apawood. Crystal McDuffie, (919) 625-6864, Moderators org [email protected]; [email protected] Approved: 10/17/2016 ANSI/APA 117-2015, Standard Specification for ANSI/APCO 1.108.1-2018, Minimum [email protected] Structural Glued Laminated Timber of Operational Standards for the Use of ANSI/ANS 8.23-2007 (R2012), Nuclear Criticality Softwood Species TTY/TDD or Similar Device in the Public Accident Emergency Planning and Response Approved: 4/17/2015 Safety Communications Center Approved: 5/31/2012 Borjen Yeh, (253) 620-7467, borjen.yeh@apawood. Approved: 8/16/2018 [email protected] org Crystal McDuffie, (919) 625-6864, [email protected]; [email protected] ANSI/ANS 8.24-2017, Validation of Neutron ANSI/APA PRG 320-2018, Standard for Transport Methods for Nuclear Criticality Performance-Rated Cross-Laminated Timber ANSI/APCO 1.110.1-2015, Multi-Functional Safety Calculations Approved: 2/6/2018 Multi-Discipline Computer Aided Dispatch Approved: 12/12/2017 Borjen Yeh, (253) 620-7467, borjen.yeh@apawood. (CAD) Minimal Functional Requirments org Approved: 1/7/2015 [email protected] Crystal McDuffie, (919) 625-6864, ANSI/APA PRP 210-2019, Standard for ANSI/ANS 8.26-2007 (R2016), Criticality Safety [email protected]; [email protected] Performance-Rated Engineered Wood Siding Engineer Training and Qualification Program Approved: 1/18/2019 ANSI/APCO 1.111.2-2013 (R2018), Public Safety Approved: 12/15/2016 Borjen Yeh, (253) 620-7467, borjen.yeh@apawood. Communications Common Disposition Codes [email protected] org for Data Exchange ANSI/ANS 8.27-2015, Burnup Credit for LWR Approved: 3/20/2018 ANSI/APA PRR 410-2016, Standard for Fuel Crystal McDuffie, (919) 625-6864, Performance Rated Engineered Wood Rim [email protected]; [email protected] Approved: 11/10/2015 Boards [email protected] Approved: 1/24/2017 ANSI/APCO 1.112.1-2014, Best Practices for the Use of Social Media by Public Safety ANSI/ANS 8.3-1997 (R2017), Criticality Accident Borjen Yeh, (253) 620-7467, borjen.yeh@apawood. Communications Alarm System org Approved: 9/19/2014 Approved: 10/25/2017 ANSI/APA PRS 610.1-2018, Standard for Crystal McDuffie, (919) 625-6864, [email protected] Performance-Rated Structural Insulated [email protected]; [email protected] Panels in Wall Applications ANSI/ANS 8.5-1996 (R2017), Use of Approved: 4/16/2018 ANSI/APCO 1.113.1-2019, Public Safety Borosilicate-Glass Raschig Rings as a Neutron Communications Incident Handling Process Absorber in Solutions of Fissile Material Borjen Yeh, (253) 620-7467, borjen.yeh@apawood. org Approved: 1/9/2019 Approved: 11/14/2017 Crystal McDuffie, (919) 625-6864, [email protected] APCO (ASSOCIATION OF PUBLIC-SAFETY [email protected]; [email protected] COMMUNICATIONS OFFICIALS- ANSI/ANS 8.6-1983 (R2017), Safety in INTERNATIONAL) ANSI/APCO 1.114.1-2017, APCO Recommended Conducting Subcritical Neutron- Best Practices for PSAP's when Processing Multiplication Measurements in Situ ANSI/APCO 3.103.2-2015, Minimum Training Vehicle Telematics Calls from Telematics Approved: 8/24/2017 Standards for Public Safety Service Providers [email protected] Telecommunicators Approved: 9/29/2017 Approved: 7/14/2015 ANSI/ANS 8.7-1998 (R2017), Nuclear Criticality Crystal McDuffie, (919) 625-6864, [email protected]; [email protected] Safety in the Storage of Fissile Materials Crystal McDuffie, (919) 625-6864, [email protected]; [email protected] Approved: 12/14/2017 ANSI/APCO 1.115.1-2018, Core Competencies, [email protected] ANSI/APCO 1.101.3-2015, Standard for Public Operational Factors and Training for Next Safety Telecommunicators When Responding Generation Technologies in Public Safety to Calls of Missing, Abducted and Sexually Communications Exploited Children Approved: 7/3/2018 Approved: 1/8/2015 Crystal McDuffie, (919) 625-6864, Crystal McDuffie, (919) 625-6864, [email protected]; [email protected] [email protected]; [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 27 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/APCO 1.116.1-2015, Public Safety ANSI/APCO 3.108.2-2018, Core Competencies ANSI/API 613-2002 (R2010), Special Purpose Communications Common Status Codes for and Minimum Training Standards for Public Gear Units for Petroleum, Chemical, and Gas Data Exchange Safety Communications Instructor Industry Services Approved: 4/7/2015 Approved: 6/7/2018 Approved: 10/26/2010 Crystal McDuffie, (919) 625-6864, Crystal McDuffie, (919) 625-6864, Valeen Young ([email protected]) [email protected]; [email protected] [email protected]; [email protected] ANSI/API 671/ISO Standard 10441-2007 ANSI/APCO 2.103.1-2012, Public Safety ANSI/APCO 3.109.2-2014, Core Competencies (R2010), Special Purpose Couplings for Communications Common Incident Types for and Minimum Training Standards for Public Petroleum, Chemical and Gas Industry Data Exchange Safety Communications Manager/Director Services Approved: 11/2/2012 Approved: 6/9/2014 Approved: 8/31/2010 Crystal McDuffie, (919) 625-6864, Crystal McDuffie, (919) 625-6864, Valeen Young ([email protected]) [email protected]; [email protected] [email protected]; [email protected] ANSI/API 6DX-201/ISO 12490-2011, Mechanical ANSI/APCO 2.106.1-2019, Public Safety Grade ANSI/APCO/CSAA 2.101.2-2014, Alarm integrity and sizing of actuators and site Hardening Requirements Monitoring Company to PSAP CAD mounting kits for pipeline valves Approved: 6/11/2019 Automated Secure Alarm Protocol (ASAP) Approved: 10/16/2012 Crystal McDuffie, (919) 625-6864, Approved: 8/5/2014 Valeen Young ([email protected]) [email protected]; [email protected] Crystal McDuffie, (919) 625-6864, [email protected]; [email protected] ANSI/API 780-2013, Security Risk Assessment ANSI/APCO 3.101.3-2017, Core Competencies Methodology for the Petroleum and and Minimum Training Standards for Public ANSI/APCO/NENA 1.102.2-2010, Public Safety Petrochemical Industries Safety Communications Training Officer Answering Point (PSAP) Service Capability Approved: 4/2/2013 (CTO) Rating Scale Valeen Young ([email protected]) Approved: 9/12/2017 Approved: 7/28/2010 Crystal McDuffie, (919) 625-6864, Crystal McDuffie, (919) 625-6864, ANSI/API Bulletin 100-3-2014, Community [email protected]; [email protected] [email protected]; [email protected] Engagement Guidelines Approved: 6/6/2014 ANSI/APCO 3.102.2-2017, Core Competencies ANSI/APCO/NENA 1.105.2-2015, Standard for and Minimum Training Standards for Public Telecommunicator Emergency Response Valeen Young ([email protected]) Safety Communications Supervisors Taskforce (TERT) Deployment ANSI/API MPMS 14.3.1-2011, Concentric, Approved: 9/12/2017 Approved: 7/14/2015 Square-edged Orifice Meters Part 1 - Crystal McDuffie, (919) 625-6864, Crystal McDuffie, (919) 625-6864, General Equations and Uncertainty [email protected]; [email protected] [email protected]; [email protected] Guidelines Approved: 6/10/2011 ANSI/APCO 3.104.2-2017, Core Competencies ANSI/APCO/NENA 2.105.1-2017, APCO/NENA and Minimum Training Standard for Public NG 9-1-1 Emergency Incident Data Document Valeen Young ([email protected]) Safety Communications Training Coordinator (EIDD) ANSI/API MPMS CH. 14.3.3-2012, Orific Approved: 9/19/2017 Approved: 1/3/2017 Metering of Natural Gas and Other Related Crystal McDuffie, (919) 625-6864, Crystal McDuffie, (919) 625-6864, Hydrocarbon Fluids, Natural Gas Applications [email protected]; [email protected] [email protected]; [email protected] Approved: 10/25/2012 ANSI/APCO 3.105.1-2015, Minimum Training ANSI/APCO/NPSTC 1.104.2-2017, Standard Valeen Young ([email protected]) Standard for TTY/TDD Use in the Public Channel Nomenclature for the Public Safety ANSI/API MPMS Ch. 21.1-2011, Electronic Gas Safety Communications Center Interoperability Channels Measurement Approved: 2/24/2015 Approved: 1/3/2017 Approved: 6/28/2011 Crystal McDuffie, (919) 625-6864, Crystal McDuffie, (919) 625-6864, Valeen Young ([email protected]) [email protected]; [email protected] [email protected]; [email protected]

ANSI/APCO 3.106.2-2017, Core Competencies API (AMERICAN PETROLEUM INSTITUTE) ANSI/API MPMS Chapter 14.3.2, 5th Ed.-2016, and Minimum Training Standards for Public Concentric, Square-Edged Orifice Meters- Safety Communications Quality Assurance ANSI/API 13M/ISO 13503-1-2004 (R2018), Specification and Installation Requirements Evaluators Measurement of Viscous Properties of Approved: 2/11/2016 Approved: 9/12/2017 Completion Fluids Valeen Young ([email protected]) Approved: 12/11/2018 Crystal McDuffie, (919) 625-6864, ANSI/API MPMS Chapter 2.2C, 1st Edition-2002 [email protected]; [email protected] Valeen Young ([email protected]) (R2015), Calibration of Upright Cylindrical ANSI/APCO 3.107.1-2015, Core Compentencies ANSI/API 19G4 (ISO 17078-4)-2011, Practices Tanks Using the Optical-Triangulation and Minimum Training Standards for Public for Side-pocket Mandrels and Related Method Safety Communications Technician Equipment Approved: 6/19/2015 Approved: 2/24/2015 Approved: 1/13/2011 Valeen Young ([email protected]) Crystal McDuffie, (919) 625-6864, Valeen Young ([email protected]) [email protected]; [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 28 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/API MPMS Chapter 2.2E, 1st Edition-2009 ANSI/API Recommended Practice 2N-2015, ANSI/API RP 17P/ISO 13628-15-2011, (R2015), Petroleum and Liquid Petroleum Planning, Designing, and Constructing Recommended Practice for Manifolds and Products - Calibration of Horizontal Structures and Pipelines for Arctic Conditions Structures on Subsea Production Systems Cylindrical Tanks - Part 1: Manual Methods Approved: 3/30/2015 Approved: 1/15/2013 Approved: 6/19/2015 Valeen Young ([email protected]) Valeen Young ([email protected]) Valeen Young ([email protected]) ANSI/API Recommended Practice 754, Second ANSI/API RP 19D/ISO 13503-5, 1st Edition-2007, ANSI/API MPMS Chapter 2.2F, 1st Edition-2009 Edition-2016, Process Safety Performance Recommended Practice for Measuring the (R2015), Petroleum and Liquid Petroleum Indicators for the Refining and Petrochemical Long-term Conductivity of Proppants Products - Calibration of Horizontal Industries Approved: 11/8/2007 Cylindrical Tanks - Part 2: Internal Electro- Approved: 3/21/2016 Valeen Young ([email protected]) optical Distance-ranging Method Valeen Young ([email protected]) Approved: 6/19/2015 ANSI/API RP 2EQ-2018, Seismic design Valeen Young ([email protected]) ANSI/API RP 100-1-2019, Hydraulic Fracturing: procedures and criteria for Offshore Well Integrity and Fracture Containment Structures ANSI/API MPMS Chapter 22.1, 2nd Edition Approved: 3/20/2019 Approved: 12/3/2018 -2015, General Guidelines for Developing Valeen Young ([email protected]) Valeen Young ([email protected]) Testing Protocols for Devices Used in the Measurement of Hydrocarbon Fluids ANSI/API RP 100-2-2015, Environmental ANSI/API RP 2MET-2014, Metocean Design and Approved: 7/6/2015 Aspects Associated with E&P Operations Operating Considerations Valeen Young ([email protected]) including Hydraulic Fracturing Approved: 10/16/2014 Approved: 7/28/2015 Valeen Young ([email protected]) ANSI/API MPMS Chapter 22.3, 1st Edition-2015, Valeen Young ([email protected]) Flare Gas Meters ANSI/API RP 2TOP-2019, Topsides Structure Approved: 7/8/2015 ANSI/API RP 10B-5/ISO 10426-5-2010 (R2015), Approved: 5/1/2019 Valeen Young ([email protected]) Recommended Practice on Determination of Valeen Young ([email protected]) Shrinkage and Expansion of Well Cement ANSI/API MPMS Chapter 5.6, 1st Edition-2007 Formulations at Atmospheric Pressure ANSI/API RP 3000-2014, Classifying and Loading (R2015), Measurement of Liquid Approved: 8/18/2015 of Crude Oil into Rail Tank Cars Hydrocarbons by Coriolis Meters Valeen Young ([email protected]) Approved: 9/19/2014 Approved: 6/19/2015 Valeen Young ([email protected]) Valeen Young ([email protected]) ANSI/API RP 10B-6/ISO 10426-6-2010 (R2015), Recommended Practice on Determining the ANSI/API RP 5A3/ISO 13678, 3rd Edition-2009 ANSI/API MPMS Chapter 7.5, 1st Edition-2014, Static Gel Strength of Cement Formulations (R2015), Recommended Practice on Thread Temperature Determination - Automatic Approved: 8/18/2015 Compounds for Casing, Tubing, Line Pipe, and Tank Temperature Measurement on Board Valeen Young ([email protected]) Drill Stem Elements Marine Vessels Carrying Refigerated Approved: 8/18/2015 Hydrocarbon and Chemical Gas Fluids ANSI/API RP 10D-2/ISO 10427-2-2004 (R2015), Valeen Young ([email protected]) Approved: 1/31/2014 Recommended Practice for Centralizer Valeen Young ([email protected]) Placement and Stop Collar Testing ANSI/API RP 5A5/ISO 15463-2010 (R2015), Field Approved: 8/18/2015 Inspection of New Casing, Tubing, and Plain- ANSI/API MPMS Chapter 9.4, 1st edition-2017, Valeen Young ([email protected]) end Drill Pipe Continuous Density Measurement Under Approved: 8/18/2015 Dynamic (Flowing) Conditions ANSI/API RP 10F/ISO 10427-3-2010 (R2015), Valeen Young ([email protected]) Approved: 1/25/2017 Recommended Practice for Performance Valeen Young ([email protected]) Testing of Cementing Float Equipment ANSI/API RP 7G-2, 1st Edition/ISO 10407-2 Approved: 8/18/2015 -2009 (R2015), Recommended Practice for ANSI/API Recommended Practice 2EQ-2014, Valeen Young ([email protected]) Drill Stem Element Inspection Seismic Design Procedures for Offshore Approved: 8/18/2015 Structures ANSI/API RP 1173-2015, Pipeline Safety Valeen Young ([email protected]) Approved: 10/16/2014 Management Systems Valeen Young ([email protected]) Approved: 5/19/2015 ANSI/API Spec 10A, 24th Edition/ISO 10426-1 Valeen Young ([email protected]) -2010 (R2015), Specification for Cements and ANSI/API Recommended Practice 2GEO-2014, Materials for Well Cementing Geotechnical and Foundation Design ANSI/API RP 13I/ISO 10416-2008, Approved: 8/18/2015 Considerations Recommended Practice for Laboratory Valeen Young ([email protected]) Approved: 10/21/2014 Testing Drilling Fluids Valeen Young ([email protected]) Approved: 8/25/2008 ANSI/API Spec 10D/ISO 10427-1-2010 (R2015), Valeen Young ([email protected]) Specification for Bow-Spring Casing ANSI/API Recommended Practice 2MOP-2010 Centralizers (R2015), Marine Operations ANSI/API RP 17G/ISO 13628-7-2006 (R2016), Approved: 8/18/2015 Approved: 8/18/2015 Recommended Practice for Valeen Young ([email protected]) Valeen Young ([email protected]) Completion/Workover Riser Systems Approved: 9/26/2016 Valeen Young ([email protected])

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 29 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/API Spec 11D1/ISO 14310, 3rd Edition ANSI/API Specification 19G2-2010, Flow-control ANSI/API Standard 662, Part 2-2011, Plate Heat -2014, Packers and Bridge Plugs Devices for Side-pocket Mandrels Exchangers for General Refinery Services, Approved: 12/17/2014 Approved: 6/22/2010 Part 2 - Brazed Aluminum Plate-fin Heat Valeen Young ([email protected]) Valeen Young ([email protected]) Exchangers Approved: 2/22/2011 ANSI/API Spec 11D3/ISO 15136-2-2008, ANSI/API Specification 19G3 (ISO 17078-3) Valeen Young ([email protected]) Specification for Progressing Cavity Pump -2011, Running Tools, Pulling Tools and Kick- Systems for Artificial Lift - Surface-drive over Tools and Latches for Side-Pocket ANSI/API Standard RP 755-2010 (R2018), Systems Mandrels Fatigue Risk Management Systems for Approved: 5/8/2008 Approved: 1/13/2011 Personnel in the Refining and Petrochemical Valeen Young ([email protected]) Valeen Young ([email protected]) Industries Approved: 1/24/2018 ANSI/API Spec 13A/ISO 13500, 18th Ed-2010, ANSI/API Specification 19SS/ISO 17824:2010, Valeen Young ([email protected]) Specification for Drilling Fluid Materials Sand Screens Approved: 1/8/2010 Approved: 4/19/2018 ANSI/API Standard RP 755-2019, Fatigue Risk Valeen Young ([email protected]) Valeen Young ([email protected]) Management Systems for Personnel in the Refining and Petrochemical Industries ANSI/API Spec 17D, 2nd Ed/ISO 13628-4 ANSI/API Specification 19V/ISO 28781-2013, Approved: 3/27/2019 (Addenda)-2015, Design and Operations of Subsurface Barrier Valves and Related Valeen Young ([email protected]) Subsea Production Systems - Subsea Equipment Wellhead and Tree Equipment Approved: 2/19/2013 ANSI/API Std 614 Pt 1, 5th Ed/ISO 10438-1, 1st Approved: 8/6/2015 Valeen Young ([email protected]) Edition-2007, Petroleum, petrochemical and Valeen Young ([email protected]) natural gas industries - Lubrication, shaft- ANSI/API Specification 7-1/ISO 10424-1-2007 sealing and control-oil systems and auxiliaries ANSI/API Spec 17D, 2nd Ed/ISO 13628-4-2011, (R2015), Specification for Rotary Drill Stem - Part 1: General Requirements Specification for Subsea Wellhead and Elements Approved: 11/28/2007 Christmas Tree Equipment Approved: 8/18/2015 Valeen Young ([email protected]) Approved: 3/1/2011 Valeen Young ([email protected]) Valeen Young ([email protected]) ANSI/API Std 614 Pt 2, 5th Ed/ISO 10438-2, 1st ANSI/API Standard 2350-2012, Overfill Ed-2007, Petroleum, petrochemical and ANSI/API Spec 5CRA/ISO 13680, 1st Edition Protection for Storage Tanks in Petroleum natural gas industries - Lubrication, shaft- -2009 (R2015), Specification for Corrosion Facilities sealing and control-oil systems and auxiliaries Resistant Alloy Seamless Tubes for Use as Approved: 3/12/2012 - Part 2: Special-purpose oil systems Casing, Tubing and Coupling Stock Valeen Young ([email protected]) Approved: 11/28/2007 Approved: 8/18/2015 Valeen Young ([email protected]) Valeen Young ([email protected]) ANSI/API Standard 537-2016, Flare Details for Petroleum, Petrochemical and Natural Gas ANSI/API Std 614 Pt 3, 5th Ed/ISO 10438-3, 1st ANSI/API Spec 5DP/ISO 11961-2009 (R2015), Industries Ed-2007, Petroleum, petrochemical and Specification for Drill Pipe Approved: 4/25/2016 natural gas industries - Lubrication, shaft- Approved: 8/18/2015 Valeen Young ([email protected]) sealing and control-oil systems and auxiliaries Valeen Young ([email protected]) - Part 3: General-purpose oil systems ANSI/API Standard 610-2009, Centrifugal Approved: 11/30/2007 ANSI/API Spec 6A/ISO 10423-2010 (R2018), Pumps for Petroleum, Petrochemical and Valeen Young ([email protected]) Specification for Wellhead and Christmas Natural Gas Industries Tree Equipment Approved: 6/14/2010 ANSI/API Std 614 Pt 4, 5th Ed/ISO 10438-4, 1st Approved: 2/27/2018 Valeen Young ([email protected]) Ed-2007, Petroleum, petrochemical and Valeen Young ([email protected]) natural gas industries - Lubrication, shaft- ANSI/API Standard 618-2008 (R2016), sealing and control-oil systems and auxiliaries ANSI/API Spec 7-1/ISO 10424-1-2004-2018, Reciprocating Compressors for Petroleum, - Part 4: Self-acting gas seal support systems Petroleum and natural gas industries - Rotary Chemical, and Gas Industry Services Approved: 11/30/2007 drilling equipment - Part 1: Rotary drill stem Approved: 8/3/2016 Valeen Young ([email protected]) elements Valeen Young ([email protected]) Approved: 11/29/2018 ANSI/API/MPMS Ch. 17.10.1/ISO 10976-6, 1st Valeen Young ([email protected]) ANSI/API Standard 619-2008, Rotary-Type Edition-2013, Measurement of Cargoes on Positive Displacement Compressors for Board Marine Gas Carriers - Part 1: Liquefied ANSI/API Specification 19AC/ISO 14998, 1st Petroleum, Petrochemical and Natural Gas Natural Gas Edition-2016, Completion Accessories Industries Approved: 10/18/2013 Approved: 3/21/2016 Approved: 8/19/2010 Valeen Young ([email protected]) Valeen Young ([email protected]) Valeen Young ([email protected])

ANSI/API Specification 19G1-2010, Side-Pocket ANSI/API Standard 662, Part 1-2011, Plate Heat Mandrels Exchangers for General Refinery Services, Approved: 3/15/2010 Part 1 - Plate-and-Frame Heat Exchangers Valeen Young ([email protected]) Approved: 2/22/2011 Valeen Young ([email protected])

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 30 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

APPA (APPA - LEADERSHIP IN ANSI CGATS 12642-2 (IT8.7/4)-2015, Graphic ANSI CGATS/ISO 12640-1-2007 (R2015), EDUCATIONAL FACILITIES) technology -- Input data for characterization Graphic technology -- Prepress digital data of 4-colour process printing -- Part 2: exchange -- Part 1: CMYK standard colour ANSI/APPA 1000-1-2017, Total Cost of Expanded data set image data (CMYK/SCID) Ownership (TCO) for Facilities Asset Approved: 8/31/2015 Approved: 3/18/2015 Management - Part 1: Key Principles Mary Abbott, NPES (ASC CGATS); [email protected] Mary Abbott, NPES (ASC CGATS); [email protected] Approved: 12/14/2017 Billie Zidek, (703) 542-3846, [email protected] ANSI/CGATS 21-1-2013, Graphic technology - ANSI CGATS/ISO 12640-2-2007 (R2013), Printing from digital data across multiple Graphic technology - Prepress digital data APTECH (ASC B65) (ASSOCIATION FOR technologies - Part 1: Principles exchange - Part 2: XYX/sRGB encoded PRINT TECHNOLOGIES) Approved: 3/7/2013 standard colour image data (XYZ/SCID) Mary Abbott, NPES (ASC CGATS); [email protected] Approved: 1/29/2013 ANSI B65-1-2011, Graphic technology - Safety Mary Abbott, NPES (ASC CGATS); [email protected] requirements for graphic technology ANSI/CGATS 21-2-2013, Graphic technology - equipment and systems - Part 1: General Printing from digital data across multiple ANSI/CGATS/ISO 12640-3-2007 (R2016), requirements technologies - Part 2: Reference Graphic technology - Prepress digital data Approved: 9/12/2011 characterization data-2012 exchange - Part 3: CIELAB standard colour Debra Orf, (703) 264-7229, [email protected] Approved: 3/7/2013 image data (CIELAB/SCID) Mary Abbott, NPES (ASC CGATS); [email protected] Approved: 10/11/2016 ANSI B65-2-2011, Graphic technology - Safety Mary Abbott, NPES (ASC CGATS); [email protected] requirements for graphic technology ANSI/CGATS ISO 12639-2004 (R2019), Graphic equipment and systems - Part 2: Prepress technology -- Prepress digital data exchange ANSI/CGATS/ISO 12640-4-2012 (R2018), and press equipment and systems -- Tag image file format for image technology Graphic technology Prepress digital data Approved: 8/23/2011 (TIFF/IT) exchange Part 4: Wide gamut display- Debra Orf, (703) 264-7229, [email protected] Approved: 3/14/2019 referred standard colour image data [Adobe Mary Abbott, NPES (ASC CGATS); [email protected] RGB (1998)/SCID] ANSI B65-3-2011, Graphic technology - Safety Approved: 4/17/2018 requirements for graphic technology ANSI CGATS.17-2009 (R2015), Graphic Mary Abbott, NPES (ASC CGATS); [email protected] equipment and systems - Part 3: Binding and technology - Exchange format for color and finishing equipment and systems process control data using XML or ASCII text ANSI CGATS/ISO 12641-1-2018, Graphic Approved: 7/29/2011 Approved: 3/18/2015 technology - Prepress digital data exchange Debra Orf, (703) 264-7229, [email protected] Mary Abbott, NPES (ASC CGATS); [email protected] - Colour targets for input scanner calibration - Part 1: Colour targets for input scanner ANSI B65-5-2011, Graphic technology - Safety ANSI/CGATS.4-2011 (R2016), Graphic calibration requirements for graphic technology technology - Graphic arts reflection Approved: 2/27/2018 equipment and systems - Part 5: Stand- densitometry measurements - Terminology, Mary Abbott, NPES (ASC CGATS); [email protected] alone platen presses equations, image elements and procedures Approved: 8/24/2011 Approved: 10/11/2016 ANSI/CGATS/ISO 12646-2017, Graphic Debra Orf, (703) 264-7229, [email protected] Mary Abbott, NPES (ASC CGATS); [email protected] technology - Displays for colour proofing - Characteristics ANSI B65/NAPIM 177.1-2018, Safety standard ANSI CGATS.5-2018, Graphic technology Approved: 1/23/2017 Three-roll printing ink mills Spectral measurement and colorimetric Mary Abbott, NPES (ASC CGATS); [email protected] Approved: 11/7/2018 computation for graphic arts images Debra Orf, (703) 264-7229, [email protected] Approved: 6/22/2018 ANSI/CGATS/ISO 12646/Amd 1:2008, Graphic Mary Abbott, NPES (ASC CGATS); [email protected] technology - Displays for colour proofing - ANSI B65/NAPIM 177.2-2017, Safety standard - Characteristics and viewing conditions Printing ink vertical post mixers ANSI CGATS.7-2003 (R2013), Graphic AMENDMENT 1 Approved: 9/15/2017 technology - Pallet loading for printed Approved: 1/13/2011 Debra Orf, (703) 264-7229, [email protected] materials Mary Abbott, NPES (ASC CGATS); [email protected] Approved: 8/6/2013 APTECH (ASC CGATS) (ASSOCIATION FOR Mary Abbott, NPES (ASC CGATS); [email protected] ANSI/CGATS/ISO 15790-2005 (R2013), Graphic PRINT TECHNOLOGIES) technology and photography - Certified ANSI CGATS.9-2007 (R2012), Graphic reference materials for reflection and ANSI CGATS 12642-1 (IT8.7/3)-2015, Graphic technology - Graphic arts transmission transmission metrology - Documentation and technology - Input data for characterization densitometry measurements - Terminology, procedures for use, including determination of four-colour process printing - Part 1: Initial equations, image elements and procedures of combined standard uncertainty data set Approved: 3/1/2012 Approved: 1/29/2013 Approved: 3/30/2015 Mary Abbott, NPES (ASC CGATS); [email protected] Mary Abbott, NPES (ASC CGATS); [email protected] Mary Abbott, NPES (ASC CGATS); [email protected] ANSI/CGATS/ISO 12639 Amd1-2006, Graphic technology - Prepress digital data exchange - Tag image file format for image technology (TIFF/IT) - Amendment 1 Approved: 6/14/2006 Mary Abbott, NPES (ASC CGATS); [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 31 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI CGATS/ISO 15930-1-2004/ISO 15930-1 ANSI IT8.7/2-1993 (R2013), Graphic technology ANSI/ASA S1.14-1998 (R2018), -2001 (R2017), Graphic technology - - Color reflection target for input scanner Recommendations for Specifying and Testing Prepress digital data exchange - Use of PDF calibration the Susceptibility of Acoustical Instruments - Part 1: Complete exchange using CMYK Approved: 7/29/2013 to Radiated Radio-frequency Electromagnetic data (PDF/X-1 and PDF/X-1a) Mary Abbott, NPES (ASC CGATS); [email protected] Fields, 25 MHz to 1 GHz Approved: 11/1/2017 Approved: 10/5/2018 Mary Abbott, NPES (ASC CGATS); [email protected] ANSI IT8.7/3-2010, Graphic technology - Input Susan Blaeser, (631) 390-0215, [email protected]; data for characterization of 4-color process [email protected] ANSI CGATS/ISO 15930-3-2004/ISO 15930-3 printing -2002 (R2013), Graphic technology - Prepress Approved: 8/18/2010 ANSI/ASA S1.15-1997/Part 1 (R2016), digital data exchange - Use of PDF - Part 3: Mary Abbott, NPES (ASC CGATS); [email protected] Measurement Microphones - Part 1: Complete exchange suitable for color Specifications for Laboratory Standard managed workflows (PDF/X-3) ANSI IT8.7/4-2005 (R2010), Graphic technology Microphones Approved: 1/29/2013 - Input data for characterization of 4-color Approved: 3/31/2016 Mary Abbott, NPES (ASC CGATS); [email protected] process printing - Expanded data set Susan Blaeser, (631) 390-0215, [email protected]; Approved: 8/18/2010 [email protected] ANSI/CGATS/ISO 15930-4-2004 (R2018), Mary Abbott, NPES (ASC CGATS); [email protected] Graphic technology Prepress digital data ANSI/ASA S1.15-2005/Part 2 (R2015), exchange using PDF Part 4: Complete ANSI IT8.7/5-2019, Graphic technology Input Measurement Microphones - Part 2: Primary exchange of CMYK and spot colour printing data for characterization of 4-color process Method for Pressure Calibration of data using PDF 1.4 (PDF/X-1a) printing Extended data set Laboratory Standard Microphones by the Approved: 4/5/2018 Approved: 4/12/2019 Reciprocity Technique Approved: 5/13/2015 Mary Abbott, NPES (ASC CGATS); [email protected] Mary Abbott, NPES (ASC CGATS); [email protected] Susan Blaeser, (631) 390-0215, [email protected]; ANSI/CGATS/ISO 15930-6-2004 (R2018), ASA (ASC S1) (ACOUSTICAL SOCIETY OF [email protected] Graphic technology Prepress digital data AMERICA) exchange using PDF Part 6: Complete ANSI/ASA S1.16-2000 (R2015), Method for exchange printing data suitable for colour- ANSI/ASA S1.1-2013, Acoustical Terminology Measuring the Performance of Noise manage workflows using PDF 1.4 (PDF/X-3) Approved: 10/14/2013 Discriminating and Noise Canceling Microphones Approved: 4/5/2018 Susan Blaeser, (631) 390-0215, [email protected]; Approved: 2/20/2015 Mary Abbott, NPES (ASC CGATS); [email protected] [email protected] Susan Blaeser, (631) 390-0215, [email protected]; ANSI/CGATS/ISO 15930-7-2010 (R2016), ANSI/ASA S1.11-2016/Part 2 / IEC 61260 [email protected] Graphic technology - Prepress digital data -2:2016, Electroacoustics - Octave-Band and exchange using PDF Part 7: Complete Fractional-Octave-Band Filters - Part 2: ANSI/ASA S1.17-2014/Part 1 (R2019), exchange of printing data (PDF/X-4) and Pattern-Evaluation Tests Microphone Windscreens - Part 1: Test partial exchange of printing data with Approved: 7/19/2016 Procedures for Measurements of Insertion Loss in Still Air external profile reference (PDF/X-4p) using Susan Blaeser, (631) 390-0215, [email protected]; PDF 1.6 [email protected] Approved: 5/21/2019 Approved: 10/11/2016 Susan Blaeser, (631) 390-0215, [email protected]; ANSI/ASA S1.11-2016/Part 3/IEC 61260-3:2016, [email protected] Mary Abbott, NPES (ASC CGATS); [email protected] Electroacoustics - Octave-Band and ANSI/ASA S1.18-2018, Method for Determining ANSI/CGATS/ISO 15930-8-2010 (R2016), Fractional-Octave Band Filters, Part 3: the Acoustic Impedance of Ground Surfaces Graphic technology - Prepress digital data Periodic Tests exchange using PDF - Part 8: Partial Approved: 7/19/2016 Approved: 10/31/2018 exchange of printing data using PDF 1.6 Susan Blaeser, (631) 390-0215, [email protected]; Susan Blaeser, (631) 390-0215, [email protected]; (PDF/X-5) [email protected] [email protected] Approved: 10/11/2016 ANSI/ASA S1.11-2014/Part 1/IEC 61260-1-2014 ANSI/ASA S1.20-2012, Procedures for Mary Abbott, NPES (ASC CGATS); [email protected] (R2019), Electroacoustics - Octave-band and Calibration of Underwater Electroacoustic Transducers ANSI IT8.6-2017, Graphic technology - Fractional-octave band Filters - Part 1: Approved: 2/17/2012 Prepress digital data exchange - Diecutting Specifications (a nationally adopted data (DDES3) international standard) Susan Blaeser, (631) 390-0215, [email protected]; Approved: 8/9/2019 [email protected] Approved: 9/15/2017 Susan Blaeser, (631) 390-0215, [email protected]; Mary Abbott, NPES (ASC CGATS); [email protected] ANSI/ASA S1.25-1991 (R2017), Specification for [email protected] Personal Noise Dosimeters ANSI IT8.7/1-1993 (R2013), Graphic technology ANSI/ASA S1.13-2005 (R2010), American Approved: 3/20/2017 - Color transmission target for input scanner National Standard Measurement of Sound calibration Susan Blaeser, (631) 390-0215, [email protected]; Pressure Levels in Air [email protected] Approved: 8/7/2013 Approved: 3/5/2010 Mary Abbott, NPES (ASC CGATS); [email protected] Susan Blaeser, (631) 390-0215, [email protected]; [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 32 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASA S1.26-2014, Methods for Calculation ASA (ASC S12) (ACOUSTICAL SOCIETY OF ANSI/ASA S12.17-1996 (R2016), Impulse Sound of the Absorption of Sound by the AMERICA) Propagation for Environmental Noise Atmosphere Assessment Approved: 8/28/2014 ANSI/ASA S12.10-2011/Part 2, Acoustics - Approved: 5/6/2016 Susan Blaeser, (631) 390-0215, [email protected]; Measurement of Airborne Noise Emitted by Susan Blaeser, (631) 390-0215, [email protected]; [email protected] Information Technology and [email protected] Telecommunications Equipment - Part 2: ANSI/ASA S1.4-2014/Part 1/IEC 61672-1-2013 Declaration of Noise Emission Levels ANSI/ASA S12.18-1994 (R2019), Procedures for (R2019), Electroacoustics - Sound Level Approved: 8/17/2011 Outdoor Measurement of Sound Pressure Meters - Part 1: Specifications (a nationally Susan Blaeser, (631) 390-0215, [email protected]; Level adopted international standard) [email protected] Approved: 5/10/2019 Approved: 8/13/2019 Susan Blaeser, (631) 390-0215, [email protected]; Susan Blaeser, (631) 390-0215, [email protected]; ANSI/ASA S12.1-1983 (R2016), Guidelines for [email protected] [email protected] the Preparation of Standard Procedures to Determine the Noise Emission from Sources ANSI/ASA S12.19-1996 (R2016), Measurement ANSI/ASA S1.4-2014/Part 2/Amd.1-2019/IEC Approved: 5/6/2016 of Occupational Noise Exposure 61672-2-2013/Amd.1-2017, Amendment 1 - Susan Blaeser, (631) 390-0215, [email protected]; Approved: 5/6/2016 Electroacoustics - Sound Level Meters - Part [email protected] Susan Blaeser, (631) 390-0215, [email protected]; 2: Pattern Evaluation Tests [email protected] Approved: 8/13/2019 ANSI ASA S12.11-2013/Part 1/ISO 10302-1:2011 Susan Blaeser, (631) 390-0215, [email protected]; (R2018), Acoustics - Measurement of ANSI/ASA S12.2-2019, Criteria for Evaluating [email protected] airborne noise emitted and struture-borne Room Noise vibration induced by small air-moving devices Approved: 5/21/2019 ANSI/ASA S1.4-2014/Part 2/IEC 61672-2-2013 - Part 1: Airborne noise measurement (a Susan Blaeser, (631) 390-0215, [email protected]; (R2019), Electroacoustics - Sound Level nationally adopted international standard) [email protected] Meters - Part 2: Pattern Evaluation Tests (a Approved: 7/13/2018 nationally adopted international standard) Susan Blaeser, (631) 390-0215, [email protected]; ANSI/ASA S12.23-1989 (R2016), Method for the Approved: 8/13/2019 [email protected] Designation of Sound Power Emitted by Susan Blaeser, (631) 390-0215, [email protected]; Machinery and Equipment [email protected] ANSI ASA S12.11 PT 2-2013, ISO 10302-2:2011 Approved: 5/6/2016 (R2018), Acoustics - Measurement of Susan Blaeser, (631) 390-0215, [email protected]; ANSI/ASA S1.4-2014/Part 3/IEC 61672-3-2013 airborne noise emitted and structure-borne [email protected] (R2019), Electroacoustics - Sound Level vibration induced by small air-moving devices Meters - Part 3: Periodic Tests (a nationally - Part 2: Structure-borne vibration ANSI/ASA S12.3-1985 (R2016), Statistical adopted international standard) measurements (a nationally adopted Methods for Determining and Verifying Approved: 8/13/2019 international standard) Stated Noise Emission Values of Machinery Susan Blaeser, (631) 390-0215, [email protected]; Approved: 7/13/2018 and Equipment [email protected] Susan Blaeser, (631) 390-0215, [email protected]; Approved: 5/6/2016 [email protected] Susan Blaeser, (631) 390-0215, [email protected]; ANSI/ASA S1.40-2006 (R2016), Specifications [email protected] and Verification Procedures for Sound ANSI/ASA S12.12-1992 (R2017), Engineering Calibrators Method for the Determination of Sound ANSI/ASA S12.42-2010, Methods for the Approved: 9/26/2016 Power Levels of Noise Sources Using Sound Measurement of Insertion Loss of Hearing Susan Blaeser, (631) 390-0215, [email protected]; Intensity Protection Devices in Continuous or [email protected] Approved: 9/29/2017 Impulsive Noise Using Microphone-in-Real- Susan Blaeser, (631) 390-0215, [email protected]; Ear or Acoustic Test Fixture Procedures ANSI/ASA S1.42-2001 (R2016), Design Response [email protected] Approved: 1/11/2010 of Weighting Networks for Acoustical Susan Blaeser, (631) 390-0215, [email protected]; Measurements ANSI/ASA S12.14-1992 (R2012), Methods for [email protected] Approved: 3/31/2016 the Field Measurement of the Sound Output Susan Blaeser, (631) 390-0215, [email protected]; of Audible Public Warning Devices Installed ANSI/ASA S12.43-1997 (R2017), Methods for [email protected] at Fixed Locations Outdoors Measurement of Sound Emitted by Approved: 11/30/2012 Machinery and Equipment at Workstations ANSI ASA S1.6-2016, Preferred Frequencies and Susan Blaeser, (631) 390-0215, [email protected]; and Other Specified Positions Filter Band Center Frequencies for Acoustical [email protected] Approved: 9/29/2017 Measurements Susan Blaeser, (631) 390-0215, [email protected]; Approved: 8/15/2016 ANSI/ASA S12.15-1992 (2016), Acoustics - [email protected] Susan Blaeser, (631) 390-0215, [email protected]; Portable Electric Power Tools, Stationary and [email protected] Fixed Electric Power Tools, and Gardening ANSI/ASA S12.44-1997 (R2017), Standard Appliances - Measurement of Sound Emitted Methods for Calculation of Sound Emitted by ANSI/ASA S1.8-2016, Reference Values for Approved: 9/1/2016 Machinery and Equipment at Workstations Levels Used in Acoustics and Vibrations Susan Blaeser, (631) 390-0215, [email protected]; and Other Specified Positions from Sound Approved: 5/6/2016 [email protected] Power Level Susan Blaeser, (631) 390-0215, [email protected]; Approved: 9/29/2017 [email protected] Susan Blaeser, (631) 390-0215, [email protected]; [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 33 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI ASA S12.5-2016/ISO 6926-2016, Acoustics ANSI/ASA S12.55-2012, ISO 3745:2012, ANSI/ASA S12.60-2019/Part 4, Acoustical - Requirements for the Performance and Acoustics - Determination of sound power Performance Criteria, Design Requirements, Calibration of Reference Sound Sources Used levels and sound energy levels of noise and Guidelines for Schools, Part 4: Acoustic for the Determination of Sound Power Levels sources using sound pressure - Precision Standards for Physical Education Teaching Approved: 4/11/2016 methods for anechoic rooms and hemi- Environments Susan Blaeser, (631) 390-0215, [email protected]; anechoic rooms Approved: 7/29/2019 [email protected] Approved: 8/23/2012 Susan Blaeser, (631) 390-0215, [email protected]; Susan Blaeser, (631) 390-0215, [email protected]; [email protected] ANSI/ASA S12.50-2002/ISO 3740-2000 (R2017), [email protected] Acoustics - Determination of sound power ANSI/ASA S12.60/Part 1-2010 (R2015), levels of noise sources - Guidelines for the ANSI ASA S12.55-2012, ISO 3745:2012 (R2019), Standard Acoustical Performance Criteria, use of basic standards Acoustics - Determination of sound power Design Requirements, and Guidelines for Approved: 10/5/2017 levels and sound energy levels of noise Schools - Part 1: Permanent Schools Susan Blaeser, (631) 390-0215, [email protected]; sources using sound pressure - Precision Approved: 4/1/2015 [email protected] methods for anechoic rooms and hemi- Susan Blaeser, (631) 390-0215, [email protected]; anechoic rooms (a nationally adopted [email protected] ANSI ASA S12.51-2012/ISO 3741-2010 (R2017), international standard) Acoustics - Determination of sound power Approved: 1/17/2019 ANSI/ASA S12.62-2012/ISO 9613-2:1996 (MOD) levels and sound energy levels of noise Susan Blaeser, (631) 390-0215, [email protected]; (R2017), Acoustics - Attenuation of sound sources using sound pressure - Precision [email protected] during propagation outdoors - Part 2: methods for reverberation test rooms General method of calculation (a modified Approved: 3/2/2017 ANSI/ASA S12.56-2011 / ISO 3746:2010 nationally adopted international standard) Susan Blaeser, (631) 390-0215, [email protected]; (R2016), Acoustics - Determination of sound Approved: 10/5/2017 [email protected] power levels and sound energy levels of Susan Blaeser, (631) 390-0215, [email protected]; noise sources using sound pressure - Survey [email protected] ANSI/ASA S12.53-1999/Part 2 (R2015)/ISO 3743 method using an enveloping measurement -2-1994 (R2015), Acoustics - Determination surface over a reflecting plane ANSI/ASA S12.64-2009/Part 1 (R2014), of sound power levels of noise sources using Approved: 5/6/2016 Standard Quantities and Procedures for sound pressure - Engineering methods for Susan Blaeser, (631) 390-0215, [email protected]; Description and Measurement of Underwater small, movable sources in reverberant fields - [email protected] Sound from Ships - Part 1: General Part 2: Methods for special reverberation test Requirements rooms. ANSI/ASA S12.57-2011/ISO 3747-2010 (R2016), Approved: 9/10/2014 Approved: 1/26/2015 Acoustics - Determination of sound power Susan Blaeser, (631) 390-0215, [email protected]; Susan Blaeser, (631) 390-0215, [email protected]; levels and sound energy levels of noise [email protected] [email protected] sources using sound pressure - Engineering/survey methods for use in situ in ANSI/ASA S12.65-2006 (R2011), Rating Noise ANSI/ASA S12.53-2011/Part 1/ISO 3743-1:2010 a reverberant environment with Respect to Speech Interference (R2016), Acoustics - Determination of sound Approved: 7/19/2016 Approved: 3/30/2011 power levels and sound energy levels of Susan Blaeser, (631) 390-0215, [email protected]; Susan Blaeser, (631) 390-0215, [email protected]; noise sources using sound pressure - [email protected] [email protected] Engineering methods for small movable sources in reverberant fields - Part 1: ANSI ASA S12.58-2012 (R2019), Sound Power ANSI/ASA S12.67-2008 (R2013), Pre-Installation Comparison method for a hard-walled test Level Determination for Sources Using a Airborne Sound Measurements and room Single-source Position Acceptance Criteria of Shipboard Equipment Approved: 2/25/2016 Approved: 1/17/2019 Approved: 11/26/2013 Susan Blaeser, (631) 390-0215, [email protected]; Susan Blaeser, (631) 390-0215, [email protected]; Susan Blaeser, (631) 390-0215, [email protected]; [email protected] [email protected] [email protected]

ANSI/ASA S12.54-2011/ISO 3744-2010 (R2016), ANSI/ASA S12.6-2016, Methods for Measuring ANSI/ASA S12.68-2007 (R2017), Methods of Acoustics - Determination of sound power the Real-Ear Attenuation of Hearing Estimating Effective A-Weighted Sound levels and sound energy levels of noise Protectors Pressure Levels When Hearing Protectors are sources using sound pressure - Engineering Approved: 6/16/2016 Worn methods for an essentially free field over a Susan Blaeser, (631) 390-0215, [email protected]; Approved: 9/29/2017 reflecting plane [email protected] Susan Blaeser, (631) 390-0215, [email protected]; Approved: 2/25/2016 [email protected] Susan Blaeser, (631) 390-0215, [email protected]; ANSI/ASA S12.60-2009/Part 2 (R2014), [email protected] Standard Acoustical Performance Criteria, ANSI/ASA S12.69-2010 (R2015), Procedure for Design Requirements, And Guidelines For Testing Railroad Horns ex situ Schools - Part 2: Relocatable Classroom Approved: 10/27/2015 Factors Susan Blaeser, (631) 390-0215, [email protected]; Approved: 9/11/2014 [email protected] Susan Blaeser, (631) 390-0215, [email protected]; [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 34 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASA S12.7-1986 (R2015), Methods for ANSI/ASA S12.9-2007/Part 5 (R2017), ANSI/ASA S2.16-1997 (R2016), Vibratory Noise Measurement of Impulse Noise Quantities and Procedures for Description Measurements and Acceptance Approved: 11/3/2015 and Measurement of Environmental Sound - Requirements for Shipboard Equipment Susan Blaeser, (631) 390-0215, [email protected]; Part 5: Sound Level Descriptors for Approved: 6/16/2016 [email protected] Determination of Compatible Land Us Susan Blaeser, (631) 390-0215, [email protected]; Approved: 9/29/2017 [email protected] ANSI/ASA S12.70-2016, Criteria for Evaluating Susan Blaeser, (631) 390-0215, [email protected]; Speech Privacy in Health Care Facilities [email protected] ANSI/ASA S2.2-1959 (R2016), Methods for the Approved: 7/19/2016 Calibration of Shock and Vibration Pickups Susan Blaeser, (631) 390-0215, [email protected]; ANSI ASA S12.9-2013/Part 1 (R2018), Quantities Approved: 6/16/2016 [email protected] and Procedures for Description and Susan Blaeser, (631) 390-0215, [email protected]; Measurement of Environmental Sound - Part [email protected] ANSI ASA S12.71-2018, Performance Criteria for 1: Basic Quantities and Definitions Systems that Estimate the Attenuation of Approved: 6/29/2018 ANSI/ASA S2.20-1983 (R2011), Estimating Air Passive Hearing Protectors for Individual Susan Blaeser, (631) 390-0215, [email protected]; Blast Characteristics for Single Point Users [email protected] Explosions in Air, with a Guide to Evaluation Approved: 5/7/2018 of Atmospheric Propagation and Effects Susan Blaeser, (631) 390-0215, [email protected]; ANSI ASA S12.9-2013/Part 3 (R2018), Quantities Approved: 4/22/2011 [email protected] and Procedures for Description and Susan Blaeser, (631) 390-0215, [email protected]; Measurement of Environmental Sound, Part [email protected] ANSI/ASA S12.72-2015, Procedure for 3: Short-term Measurements with an Measuring the Ambient Noise Level in a Observer Present ANSI ASA S2.21-1998 (R2017), Method for Room Approved: 6/29/2018 Preparation of a Standard Material for Approved: 2/24/2015 Susan Blaeser, (631) 390-0215, [email protected]; Dynamic Mechanical Measurements Susan Blaeser, (631) 390-0215, [email protected]; [email protected] Approved: 8/24/2017 [email protected] Susan Blaeser, (631) 390-0215, [email protected]; ANSI ASA S12.9-2016/Part 7, Quantities and [email protected] ANSI ASA S12.75-2012, Methods for the Procedures for Description and Measurement of Noise Emissions from High Measurement of Environmental Sound, Part ANSI ASA S2.22-1998 (R2017), Resonance Performance Military Jet Aircraft 7: Measurement of Low Frequency Noise and Method for Measuring the Dynamic Approved: 9/20/2012 Infrasound Outdoors in the Presence of Wind Mechanical Properties of Viscoelastic Susan Blaeser, (631) 390-0215, [email protected]; and Indoors in Occupied Spaces Materials [email protected] Approved: 4/25/2016 Approved: 8/24/2017 Susan Blaeser, (631) 390-0215, [email protected]; Susan Blaeser, (631) 390-0215, [email protected]; ANSI/ASA S12.76-2017, Methods for [email protected] [email protected] Measurement of Supersonic Jet Noise from Uninstalled Military Aircraft Engines ANSI/ASA S12.10-2010/Part 1, Acoustics - ANSI ASA S2.23-1998 (R2017), Single Cantilever Approved: 3/27/2017 Measurement of Airborne Noise Emitted by Beam Method for Measuring the Dynamic Susan Blaeser, (631) 390-0215, [email protected]; Information Technology and Mechanical Properties of Viscoelastic [email protected] Telecommunications Equipment - Part 1: Materials Determination of Sound Power Level and Approved: 8/24/2017 ANSI/ASA S12.8-1998 (R2013), Standard Emission Sound Pressure Level Susan Blaeser, (631) 390-0215, [email protected]; Methods for Determining the Insertion Loss Approved: 10/6/2010 [email protected] of Outdoor Noise Barriers Susan Blaeser, (631) 390-0215, [email protected]; Approved: 5/28/2013 [email protected] ANSI/ASA S2.24-2001 (R2016), Graphical Susan Blaeser, (631) 390-0215, [email protected]; Presentation of the Complex Modulus of [email protected] ASA (ASC S2) (ACOUSTICAL SOCIETY OF Viscoelastic Materials AMERICA) Approved: 3/31/2016 ANSI ASA S12.9-1992/Part 2 (R2018), Quantities Susan Blaeser, (631) 390-0215, [email protected]; and Procedures for Description and ANSI/ASA S2.75-2017/Part 2, Shaft Alignment [email protected] Measurement of Environmental Sound, Part Methodology, Part 2: Vocabulary 2: Measurement of Long-term, Wide-area Approved: 6/6/2017 ANSI/ASA S2.25-2004 (R2014), Guide for the Sound Susan Blaeser, (631) 390-0215, [email protected]; Measurement, Reporting, and Evaluation of Approved: 6/29/2018 [email protected] Hull and Superstructure Vibration in Ships Susan Blaeser, (631) 390-0215, [email protected]; Approved: 9/24/2014 [email protected] ANSI/ASA S2.1-2009 (R2014), ISO 2041-2009 Susan Blaeser, (631) 390-0215, [email protected]; (R2014), Standard Mechanical vibration, [email protected] ANSI/ASA S12.9-2005/Part 4 (R2015), shock and condition monitoring -Vocabulary Quantities and Procedures for Description Approved: 9/11/2014 ANSI/ASA S2.26-2001 (R2016), Vibration Testing and Measurement of Environmental Sound - Susan Blaeser, (631) 390-0215, [email protected]; Requirements and Acceptance Criteria for Part 4: Noise Assessment and Prediction of [email protected] Shipboard Equipment Long-Term Community Response Approved: 6/16/2016 Approved: 10/27/2015 Susan Blaeser, (631) 390-0215, [email protected]; Susan Blaeser, (631) 390-0215, [email protected]; [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 35 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASA S2.27-2002 (R2014), Guidelines for ANSI/ASA S2.61-1989 (R2015), Guide to ANSI/ASA S2.72/Part 4 Amd. 1-2010/ISO 2631-4 the Measurement and Evaluation of Mechanical Mounting of Accelerometers Amd. 1:2010 (R2018), Mechanical vibration Vibration of Ship Propulsion Machinery Approved: 8/27/2015 and shock - Evaluation of human exposure to Approved: 6/24/2014 Susan Blaeser, (631) 390-0215, [email protected]; whole-body vibration - Part 4: Guidelines for Susan Blaeser, (631) 390-0215, [email protected]; [email protected] the evaluation of the effects of vibration and [email protected] rotational motion on passenger and crew ANSI/ASA S2.62-2009 (R2019), Shock Test comfort in fixed-guideway transport systems, ANSI/ASA S2.28-2009 (R2019), Guide for the Requirements for Equipment in a Rugged Amendment 1 (a Nationally Adopted Measurement and Evaluation of Broadband Shock Environment International Standard Amendment) Vibration of Surface Ship Auxiliary Rotating Approved: 8/15/2019 Approved: 9/11/2018 Machinery Susan Blaeser, (631) 390-0215, [email protected]; Susan Blaeser, (631) 390-0215, [email protected]; Approved: 6/3/2019 [email protected] [email protected] Susan Blaeser, (631) 390-0215, [email protected]; [email protected] ANSI/ASA S2.70-2006 (R2016), Guide for the ANSI/ASA S2.73-2013/ISO 10819:2013 (R2019), Measurement and Evaluation of Human Mechanical Vibration and Shock - Hand-arm ANSI/ASA S2.29-2003 (R2019), Guide for the Exposure to Vibration Transmitted to the Vibration - Measurement and Evaluation of Measurement and Evaluation of Vibration of Hand the Vibration Transmissibility of Gloves at the Machine Shafts on Shipboard Machinery Approved: 6/17/2016 Palm of the Hand (a nationally adopted Approved: 1/17/2019 Susan Blaeser, (631) 390-0215, [email protected]; international standard) Susan Blaeser, (631) 390-0215, [email protected]; [email protected] Approved: 5/3/2019 [email protected] Susan Blaeser, (631) 390-0215, [email protected]; ANSI/ASA S2.71-1983 (R2012), Standards Guide [email protected] ANSI/ASA S2.31-1979 (R2014), Standard to the Evaluation of Human Exposure to Methods for the Experimental Determination Vibration in Buildings ANSI/ASA S2.73 Amd.1-2019/ISO 10819 Amd.1 of Mechanical Mobility, Part 1: Basic Approved: 8/6/2012 -2019, Mechanical vibration and shock – Definitions and Transducers Susan Blaeser, (631) 390-0215, [email protected]; Hand-arm vibration – Measurement and Approved: 9/11/2014 [email protected] evaluation of the vibration transmissibility of Susan Blaeser, (631) 390-0215, [email protected]; gloves at the palm of the hand – Amendment [email protected] ANSI/ASA S2.72-2002/Part 1 ISO 2631-1-1997 1 (R2018), Mechanical vibration and shock - Approved: 8/16/2019 ANSI/ASA S2.32-1982 (R2014), Standard Evaluation of human exposure to whole-body Susan Blaeser, (631) 390-0215, [email protected]; Methods for the Experimental Determination vibration - Part 1: General requirements (a [email protected] of Mechanical Mobility, Part 2: nationally adopted international standard) Measurements Using Single-Point Approved: 9/11/2018 ANSI ASA S2.75-2017/Part 1, Shaft Alignment Translational Excitation Susan Blaeser, (631) 390-0215, [email protected]; Methodology, Part 1: General Principles, Approved: 9/11/2014 [email protected] Methods, Practices, and Tolerances Susan Blaeser, (631) 390-0215, [email protected]; Approved: 6/6/2017 ANSI/ASA S2.72-2003/Part 4 (R2018)/ISO 2631 [email protected] Susan Blaeser, (631) 390-0215, [email protected]; -4-2001 (R2018), Mechanical Vibration and [email protected] ANSI/ASA S2.34-1984 (R2015), Standard Guide Shock - Evaluation of Human Exposure to to the Experimental Determination of Whole-Body Vibration - Part 4: Guidelines for ANSI/ASA S2.8-2007 (R2017), Technical Rotational Mobility Properties and the the Evaluation of the Effects of Vibration and Information Used for Resilient Mounting Complete Mobility Matrix Rotational Motion on Passenger and Crew Applications Approved: 4/1/2015 Comfort in Fixed-Guideway Transport Approved: 3/16/2017 Susan Blaeser, (631) 390-0215, [email protected]; Systems Susan Blaeser, (631) 390-0215, [email protected]; [email protected] Approved: 9/11/2018 [email protected] Susan Blaeser, (631) 390-0215, [email protected]; ANSI/ASA S2.4-1976 (R2014), Method for [email protected] ANSI ASA S2.9-2008 (R2018), Parameters for Specifying the Characteristics of Auxiliary Specifying Damping Properties of Materials Analog Equipment for Shock and Vibration ANSI/ASA S2.72/Part 1 Amd. 1-2010/ISO 2631-1 and System Damping Measurements Amd. 1:2010 (R2018), Mechanical vibration Approved: 6/13/2018 Approved: 11/5/2014 and shock - Evaluation of human exposure to Susan Blaeser, (631) 390-0215, [email protected]; Susan Blaeser, (631) 390-0215, [email protected]; whole-body vibration - Part 1: General [email protected] [email protected] requirements - Amendment 1 (a nationally adopted international standard amendment) ASA (ASC S3) (ACOUSTICAL SOCIETY OF ANSI/ASA S2.46-1989 (R2015), Standard Approved: 9/11/2018 AMERICA) Characteristics to be Specified for Seismic Susan Blaeser, (631) 390-0215, [email protected]; Transducers [email protected] ANSI/ASA S3.1-1999 (R2018), Maximum Approved: 4/1/2015 Permissible Ambient Noise Levels for Susan Blaeser, (631) 390-0215, [email protected]; Audiometric Test Rooms [email protected] Approved: 12/14/2018 Susan Blaeser, (631) 390-0215, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 36 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASA S3.13-1987 (R2012), Mechanical ANSI/ASA S3.4-2007 (R2017), Procedure for the ANSI ASA S3.50-2013 (R2018), Method for Coupler for Measurement of Bone Vibrators Computation of Loudness of Steady Sounds Evaluation of the Intelligibility of Text-to- Approved: 6/15/2012 Approved: 7/13/2017 Speech Synthesis Systems Susan Blaeser, (631) 390-0215, Susan Blaeser, (631) 390-0215, Approved: 6/13/2018 [email protected] [email protected] Susan Blaeser, (631) 390-0215, [email protected] ANSI/ASA S3.2-2009 (R2014), Method for ANSI ASA S3.41-2015, Audible Emergency Measuring the Intelligibility of Speech over Evacuation (E2) and Evacuation Signals with ANSI ASA S3.52-2016, Measurements of the Communication Systems Relocation Instructions (ESRI) Threshold of Hearing and Signal Detectability Approved: 6/2/2014 Approved: 7/14/2015 in a Sound Field Susan Blaeser, (631) 390-0215, Susan Blaeser, (631) 390-0215, Approved: 1/6/2016 [email protected] [email protected] Susan Blaeser, (631) 390-0215, [email protected] ANSI/ASA S3.20-2015, Bioacoustical ANSI/ASA S3.42-1992/Part 1 (R2017), Testing Terminology Hearing Aids with a Broadband Noise Signal ANSI/ASA S3.55-2015/Part 3/IEC 60318-3:2015, Approved: 10/22/2015 Approved: 7/12/2017 Electroacoustics - Simulators of Human Head Susan Blaeser, (631) 390-0215, Susan Blaeser, (631) 390-0215, and Ear - Part 3: Acoustic Coupler for the [email protected] [email protected] Calibration of Supra-aural Earphones Used in Audiometry ANSI/ASA S3.21-2004 (R2019), Methods for ANSI/ASA S3.42-2012/Part 2/IEC 60118 Approved: 5/15/2015 Manual Pure-tone Threshold Audiometry -15:2012 (R2017), Testing Hearing Aids - Part Susan Blaeser, (631) 390-0215, Approved: 4/12/2019 2: Methods for characterizing signal [email protected] Susan Blaeser, (631) 390-0215, processing in hearing aids with a speech-like [email protected] signal (a nationally adopted international ANSI/ASA S3.55-2014/Part 1/IEC 60318-1:2009 standard) (R2019), Electroacoustics – Simulators of ANSI ASA S3.22-2014, Specification of Hearing Approved: 11/2/2017 Human Head and Ear – Part 1: Ear Simulator Aid Characteristics Susan Blaeser, (631) 390-0215, for the Measurement of Supra-aural and Approved: 11/10/2014 [email protected] Circumaural Earphones (a nationally adopted Susan Blaeser, (631) 390-0215, international standard) [email protected] ANSI/ASA S3.44-2016/Part 1/ISO 1999-2013 Approved: 2/22/2019 (MOD), Estimation of Noise-induced Hearing Susan Blaeser, (631) 390-0215, ANSI/ASA S3.25-2009 (R2014), Standard for an Loss - Part 1: Method for Calculating [email protected] Occluded Ear Simulator Expected Noise-induced Permanent Approved: 9/11/2014 Threshold Shift (a modified nationally ANSI/ASA S3.55-2014/Part 5/IEC 60318-5:2006 Susan Blaeser, (631) 390-0215, adopted international standard) (MOD) (R2019), Electroacoustics – Simulators [email protected] Approved: 3/4/2016 of Human Head and Ear – Part 5: 2 cm3 Susan Blaeser, (631) 390-0215, Coupler for the Measurement of Hearing Aids ANSI/ASA S3.35-2010 (R2015), Method of [email protected] and Earphones Coupled to the Ear by Means Measurement of Performance Characteristics of Ear Inserts (a modified nationally adopted of Hearing Aids Under Simulated Real-Ear ANSI/ASA S3.45-2009 (R2019), Procedures for international standard) Working Conditions Testing Basic Vestibular Function Approved: 8/15/2019 Approved: 5/21/2015 Approved: 8/1/2019 Susan Blaeser, (631) 390-0215, Susan Blaeser, (631) 390-0215, Susan Blaeser, (631) 390-0215, [email protected] [email protected] [email protected] ANSI/ASA S3.6-2018, Specification for ANSI/ASA S3.36-2012 (R2018), Specification for ANSI/ASA S3.46-2013 (R2018), Methods of Audiometers a Manikin for Simulated in-situ Airborne Measurement of Real-Ear Performance Approved: 9/20/2018 Acoustic Measurements Characteristics of Hearing Aids Susan Blaeser, (631) 390-0215, Approved: 1/17/2018 Approved: 10/11/2018 [email protected] Susan Blaeser, (631) 390-0215, Susan Blaeser, (631) 390-0215, [email protected] [email protected] ANSI ASA S3.7-2016, Method for Measurement and Calibration of Earphones ANSI/ASA S3.37-1987 (R2017), Preferred ANSI/ASA S3.47-2014 (R2019), Specification of Approved: 8/22/2016 Earhook Nozzle Thread for Postauricular Performance Measurement of Hearing Susan Blaeser, (631) 390-0215, Hearing Aids Assistance Devices/Systems [email protected] Approved: 7/12/2017 Approved: 3/14/2019 Susan Blaeser, (631) 390-0215, Susan Blaeser, (631) 390-0215, ANSI/ASA S3.71-2019, Methods for Measuring [email protected] [email protected] the Effect of Head-worn Devices on Directional Sound Localization in the ANSI/ASA S3.39-1987 (R2012), Specifications ANSI/ASA S3.5-1997 (R2017), Methods for Horizontal Plane for Instruments to Measure Aural Acoustic Calculation of the Speech Intelligibility Index Approved: 4/30/2019 Impedance and Admittance (Aural Acoustic Approved: 7/12/2017 Susan Blaeser, (631) 390-0215, Immittance) Susan Blaeser, (631) 390-0215, [email protected] Approved: 6/15/2012 [email protected] Susan Blaeser, (631) 390-0215, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 37 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASA S3/SC1.100-2014 / ANSI/ASA S12.100 ANSI/ASABE AD26322-1:2008 NOV16, Tractors ANSI/ASABE AD5673-1-2017, Agricultural -2014, Methods to Define and Measure the for Agriculture and Forestry - Safety - Part 1: tractors and machinery - Power take-off drive Residual Sound in Protected Natural and Standard Tractors shafts and power-input connection - Part 1: Quiet Residential Areas Approved: 11/22/2016 General manufacturing and safety Approved: 12/5/2014 Carla VanGilder, (269) 932-7015, vangilder@asabe. requirements Susan Blaeser, (631) 390-0215, org Approved: 9/12/2017 [email protected] Carla VanGilder, (269) 932-7015, vangilder@asabe. ANSI/ASABE AD26322-2-JUN2017, Tractors for org ANSI ASA S3/SC1.6-2018, Procedure for agriculture and forestry - Safety - Part 2: Determining the Audiograms in Toothed Narrow-track and small tractors ANSI/ASABE AD5673-2-SEPT2014 (R2019), Whales through Evoked Potential Methods Approved: 6/8/2017 Agricultural tractors and machinery Power Approved: 5/31/2018 Carla VanGilder, (269) 932-7015, vangilder@asabe. take-off drive shafts and power-input Susan Blaeser, (631) 390-0215, org connection Part 2: Specification for use of [email protected] PTO drive shafts, and position and clearance ANSI/ASABE AD3600:2016, Tractors, machinery of PTO drive line and PIC for various ASABE (AMERICAN SOCIETY OF for agriculture and forestry, powered lawn attachments AGRICULTURAL AND BIOLOGICAL and garden equipment - Operator's manuals - Approved: 12/31/2018 ENGINEERS) Content and format Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 5/2/2016 org ANSI/ASABE AD10448-NOV2014 (R2018), Carla VanGilder, (269) 932-7015, vangilder@asabe. Agricultural tractors Hydraulic pressure for org ANSI/ASABE AD5674-2015, Tractors and implements machinery for agricultural and forestry - Approved: 12/31/2018 ANSI/ASABE AD3918-2007 JAN2011 (R2016), Guards for power take-off (PTO) drive shafts - Milking machine installations - Vocabulary Carla VanGilder, (269) 932-7015, vangilder@asabe. Strength and wear tests and acceptance org Approved: 3/2/2016 criteria Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 9/29/2015 ANSI/ASABE AD11001-1:NOV16, Agricultural org Carla VanGilder, (269) 932-7015, vangilder@asabe. wheeled tractors - Three-point hitch org couplers - Part 1: U-frame coupler ANSI/ASABE AD4254-11-JAN2012 (R2017), Approved: 11/16/2016 Agricultural machinery - Safety - Part 11: ANSI/ASABE AD5675-2016, Agricultural tractors Pick-up balers Carla VanGilder, (269) 932-7015, vangilder@asabe. and machinery - General purpose quick- org Approved: 1/30/2017 action hydraulic couplers Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 6/23/2016 ANSI/ASABE AD11684-1995 APR2011 (R2016), org Carla VanGilder, (269) 932-7015, vangilder@asabe. Tractors, machinery for agricultural and org forestry, powered lawn and garden ANSI/ASABE AD4254-12-JUL2016 , Agricultural equipment - Safety signs and hazard machinery - Safety - Part 12: Rotary disc and ANSI/ASABE AD5707-2016, Milking Machine pictorials - General principles drum mowers and flail mowers Installations - Construction And Performance Approved: 1/26/2016 Approved: 7/13/2016 Approved: 3/23/2016 Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. org org org

ANSI/ASABE AD17225-4-FEB2018, Solid biofuels ANSI/ASABE AD4254-13-2013 (R2017), ANSI/ASABE AD6489-3-2004 JUL2017, - Fuel specifications and classes - Part 4: Agricultural machinery - Safety - Part 13: Agricultural vehicles - Mechanical Graded wood chips Large rotary mowers connections between towed and towing Approved: 2/14/2018 Approved: 12/21/2017 vehicles - Part 3: Tractor drawbar Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 7/13/2017 org org Carla VanGilder, (269) 932-7015, vangilder@asabe. org ANSI/ASABE AD20966-2016, Automatic milking ANSI/ASABE AD4254-6-2013 (R2017), installations- Requirements and testing Agricultural machinery - Safety - Part 6: ANSI/ASABE AD6690-2007 JAN2011 (R2015), Approved: 3/23/2016 Sprayers and liquid fertilizer distributors Milking machine installations - Mechanical Approved: 12/11/2017 Carla VanGilder, (269) 932-7015, vangilder@asabe. tests org Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 12/30/2015 org Carla VanGilder, (269) 932-7015, vangilder@asabe. ANSI/ASABE AD24347:2014 (R2018), org Agricultural vehicles Mechanical connections ANSI/ASABE AD500-2:OCT2016, Agricultural between towed and towing vehicles tractors - Rear-mounted power take-off ANSI/ASABE AD730:2009 W/Amd. 1-2015, Dimensions ofball-type coupling device (80 types 1, 2, 3 and 4 - Part 2: Narrow-track Agricultural wheeled tractors - Rear-mounted mm) tractors, dimensions for master shield and three-point linkage - Categories 1N, 1, 2N, 2, Approved: 12/31/2018 clearance zone 3N, 3, 4N and 4 Approved: 10/11/2016 Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 4/6/2015 org Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. org org

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 38 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASABE AD8759-1-2019, Agricultural ANSI/ASABE S592.1-2016, Best Management ANSI/ASABE S612 JUL2009 (R2015), Performing tractors — Front-mounted equipment — Part Practices for Boom Spraying On-farm Energy 1: Power take-off: Safety requirements and Approved: 8/31/2016 Approved: 12/3/2015 clearance zone around PTO Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 7/29/2019 org org Carla VanGilder, (269) 932-7015, vangilder@asabe. org ANSI/ASABE S593.1-JAN2011 (R2015), ANSI/ASABE S613-1-FEB2009 (R2018), Tractors Terminology & Definitions for Biomass and Self-Propelled Machinery for Agriculture ANSI/ASABE AD8759-1:2013, Agricultural wheel Production, Harvesting and Collection, Air Quality Systems for Cabs Terminology tractors - Front-mounted equipment - Part 1: Storage, Processing, Conversion and and Overview Power take-off and three-point linkage Utilization Approved: 12/7/2018 Approved: 2/19/2013 Approved: 12/21/2015 Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. org org org ANSI/ASABE S613-2.1-JUN-2013, Tractors and ANSI/ASABE AD8759-2- OCT2016, Agricultural ANSI/ASABE S596-2006 (R2015), Recycling self-propelled machinery for agriculture - Air wheeled tractors - Front-mounted Plastic Containers from Pesticides and quality systems for cabs - Part 2: Cab and equipment - Part 2: Stationary equipment Pesticide-Related Products HVAC design connection Approved: 12/30/2015 Approved: 6/26/2013 Approved: 10/11/2016 Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. org org org ANSI/ASABE S598 JAN2010 (R2014), Procedure ANSI/ASABE S613-3.1-JUN2018, Tractors and ANSI/ASABE AD8759-3-2019, Agricultural for Sampling, Measuring and Reporting self-propelled machinery for agriculture - Air tractors — Front-mounted equipment — Part Commingled Crop in Combine Harvest of a quality systems for cabs - Part 3: Filters for 3: Power take-off: General specifications and Subsequent Crop environmental cab HVAC systems location Approved: 1/9/2015 Approved: 6/8/2018 Approved: 8/8/2019 Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. org org org ANSI/ASABE S600-2011 (R2016), Manually ANSI/ASABE S613-4-AUG2017, Tractors and ANSI/ASABE AD8759-4-2019, Agricultural Handled Collapsible Reusable Plastic self-propelled machinery for agriculture - Air tractors — Front-mounted equipment —Part Containers for Handling of Fruits and quality systems for cabs - Part 4: 4: Three-point linkage Vegetables Performance test of a cab Approved: 8/8/2019 Approved: 1/22/2016 Approved: 8/30/2017 Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. org org org

ANSI/ASABE EP585-2015, Animal Mortality ANSI/ASABE S602.3-OCT2018 , General Safety ANSI/ASABE S618 DEC2010 (R2016), Post Frame Composting Standard for Agricultural Tractors in Scraper Building System Nomenclature Approved: 12/11/2015 Application Approved: 1/7/2016 Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 10/31/2018 Carla VanGilder, (269) 932-7015, vangilder@asabe. org Carla VanGilder, (269) 932-7015, vangilder@asabe. org org ANSI/ASABE S276.8-2016, Slow-Moving Vehicle ANSI/ASABE S619.1 MONYEAR-2019, Safety for Identification Emblem (SMV Emblem) ANSI/ASABE S604.2-OCT2018, Safety for Power Tractor-Mounted, Boom-Type Post Hole Approved: 4/13/2016 Take-off (PTO), PTO Drive Shafts, and Power Diggers Carla VanGilder, (269) 932-7015, vangilder@asabe. Input Connection (PIC) for Agricultural Field Approved: 8/22/2019 org Equipment Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 10/12/2018 org ANSI/ASABE S516-2014 (R2018), Terminology Carla VanGilder, (269) 932-7015, vangilder@asabe. for Forest Operations and Equipment org ANSI/ASABE S620-MAR2017, Safety for Approved: 12/31/2018 Anyhdrous Ammonia Application Equipment Carla VanGilder, (269) 932-7015, vangilder@asabe. ANSI/ASABE S607 OCT2007 (R2014), Ventilating Approved: 3/16/2017 org Manure Storages to Reduce Entry Risk Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 1/9/2015 org ANSI/ASABE S588.1-NOV16, Uniform Carla VanGilder, (269) 932-7015, vangilder@asabe. Terminology for Air Quality org ANSI/ASABE S623.1-JAN2017, Determining Approved: 11/22/2016 Landscape Plant Water Demands Carla VanGilder, (269) 932-7015, vangilder@asabe. ANSI/ASABE S608-2008 (R2017), Headlamps for Approved: 1/12/2017 org Agricultural Equipment Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 12/29/2017 org Carla VanGilder, (269) 932-7015, vangilder@asabe. org

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 39 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASABE S624-AUG2018, Grain Bin Access ANSI/ASABE S642-SEPT2018, Recommended ANSI/ASABE/ISO 14269-3-2006 (R2017), Design Safety Methods for Measurement and Testing of Tractors and self-propelled machines for Approved: 8/31/2018 LED Products for Plant Growth and agriculture and forestry - Operator enclosure Carla VanGilder, (269) 932-7015, vangilder@asabe. Development environment - Part 3: Determination of effect org Approved: 9/21/2018 of solar heating Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 1/23/2017 ANSI/ASABE S625.1-JUL2018, Drawbar Pin org Carla VanGilder, (269) 932-7015, vangilder@asabe. Dimensions and Requirements for Towing org Machine with Clevis ANSI/ASABE S647-OCT2018, Seed Cotton Approved: 7/27/2018 Module Identification System ANSI/ASABE/ISO 14269-4-2006 (R2017), Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 10/22/2018 Tractors and self-propelled machines for org Carla VanGilder, (269) 932-7015, vangilder@asabe. agriculture and forestry - Operator enclosure org environment - Part 4: Air filter element test ANSI/ASABE S626-SEPT2016, Landscape method Irrigation System Uniformity and Application ANSI/ASABE/ISO 12003-1-SEP17, Agricultural Approved: 1/23/2017 Rate Testing and forestry tractors - Roll-over protective Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 9/26/2016 structures on narrow-track wheeled tractors org Carla VanGilder, (269) 932-7015, vangilder@asabe. - Part 1: Front-mounted ROPS org Approved: 9/25/2017 ANSI/ASABE/ISO 14269-5-2006 (R2017), Carla VanGilder, (269) 932-7015, vangilder@asabe. Tractors and self-propelled machines for ANSI/ASABE S629-2016, Framework to Evaluate org agriculture and forestry - Operator enclosure the Sustainability of Agricultural Production environment - Part 5: Pressurization system Systems ANSI/ASABE/ISO 12003-2-2008 SEP2107, test method Approved: 6/10/2016 Agricultural and forestry tractors - Roll-over Approved: 1/23/2017 Carla VanGilder, (269) 932-7015, vangilder@asabe. protective structures on narrow-track Carla VanGilder, (269) 932-7015, vangilder@asabe. org wheeled tractors - Part 2: Rear-mounted org ROPS ANSI/ASABE S632-1-JUN2018, Precision Approved: 9/29/2017 ANSI/ASABE/ISO 15077:2008 (R2018), Tractors Agriculture Irrigation Language: Core Carla VanGilder, (269) 932-7015, vangilder@asabe. and self-propelled machinery for agriculture - Concepts, Processes, and Objects org Operator Controls - Actuating forces, Approved: 6/29/2018 displacement, location, and method of Carla VanGilder, (269) 932-7015, vangilder@asabe. ANSI/ASABE/ISO 12140-JUNE2014 (R2018), operation org Agricultural Machinery - Agricultural trailers Approved: 12/31/2018 and trailed equipment - Drawbar jacks Carla VanGilder, (269) 932-7015, vangilder@asabe. ANSI/ASABE S632-3-JUN2018, Precision Approved: 12/31/2018 org Agriculture Irrigation Language: Core Carla VanGilder, (269) 932-7015, vangilder@asabe. Concepts, Processes, and Objects org ANSI/ASABE/ISO 17101-1:2012 JUN2016, Approved: 6/29/2018 Agricultural machinery - Thrown-object test Carla VanGilder, (269) 932-7015, vangilder@asabe. ANSI/ASABE/ISO 12188-2-2015, Tractors and and acceptance criteria - Part 1: Rotary org machinery for agriculture and forestry - Test mowers procedures for positioning and guidance Approved: 6/23/2016 ANSI/ASABE S638-MAY19, Pintle Hitch and Ring systems in agriculture - Part 2: Testing of Carla VanGilder, (269) 932-7015, vangilder@asabe. for Over the Road Towed Implements satellite-based auto-guidance systems during org Approved: 5/21/2019 straight and level travel Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 10/26/2015 ANSI/ASABE/ISO 17101-2:2012 JUN2016, org Carla VanGilder, (269) 932-7015, vangilder@asabe. Agricultural machinery - Thrown-object test org and acceptance criteria - Part 2: Flail mowers ANSI/ASABE S639.2-FEB2019, Safety Standard Approved: 6/23/2016 for Large Row-Crop Flail Mowers ANSI/ASABE/ISO 14269-1-2006 (R2017), Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 2/5/2019 Tractors and self-propelled machines for org Carla VanGilder, (269) 932-7015, vangilder@asabe. agriculture and forestry - Operator enclosure org environment - Part 1: Vocabulary ANSI/ASABE/ISO 21244-2008 JAN2011 (R2016), Approved: 1/23/2017 Agricultural equipment - Mechanical ANSI/ASABE S640 JUL2017, Quanes and Units Carla VanGilder, (269) 932-7015, vangilder@asabe. connections between towed and towing of Electromagnetic Radiation for Plants org vehicles - Implement hitch rings and (Photosynthetic Organisms) attachment to tractor drawbars Approved: 7/11/2017 ANSI/ASABE/ISO 14269-2-2006 (R2017), Approved: 1/26/2016 Carla VanGilder, (269) 932-7015, vangilder@asabe. Tractors and self-propelled machines for Carla VanGilder, (269) 932-7015, vangilder@asabe. org agriculture and forestry - Operator enclosure org environment - Part 2: Heating, ventilation ANSI/ASABE S641-MAY2018 , Droplet Size and air-conditioning test method and ANSI/ASABE/ISO 23205:2016, Agricultural Classification of Aerial Application Nozzles performance tractors - Instructional seat Approved: 5/21/2018 Approved: 1/23/2017 Approved: 2/25/2016 Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. org org org

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 40 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASABE/ISO 26322-2-2012, Tractors for ANSI/ASABE/ISO 4252-MAY2012 (R2017), ANSI/ASAE D241.4-FEB93 (R2017), Density, agriculture and forestry - Safety - Part 2: Agricultural tractors - Operator's workplace, Specific Gravity, and Mass-Moisture Narrow-track and small tractors access and exit - Dimensions Relationships of Grain for Storage Approved: 6/7/2012 Approved: 1/30/2017 Approved: 11/28/2017 Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. org org org

ANSI/ASABE/ISO 27850-2016 , Tractors for ANSI/ASABE/ISO 500-3-2015 (R2019), ANSI/ASAE EP282.2-1993 (R2018), Design agriculture and forestry - Falling object Agricultural tractors — Rear-mounted power Values for Emergency Ventilation and Care of protective structures - Test procedures and take-off types 1, 2, 3 and 4 — Part 3: Main Livestock and Poultry performance requirements PTO dimensions and spline dimensions, Approved: 11/29/2018 Approved: 5/3/2016 location of PTO Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 5/21/2019 org org Carla VanGilder, (269) 932-7015, vangilder@asabe. org ANSI/ASAE EP302.4-AUG93 (R2017), Design and ANSI/ASABE/ISO 3463-SEP2017, Tractors for Construction of Surface Drainage Systems on agriculture and forestry - Roll-over ANSI/ASABE/ISO 5007:2003 MAY2006 (R2016), Agricultural Lands in Humid Areas protective structures (ROPS) - Dynamic test Agricultural wheeled tractors - Operator’s Approved: 11/30/2017 method and acceptance conditions seat - Laboratory measurement of Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 9/21/2017 transmitted vibration org Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 1/26/2016 org Carla VanGilder, (269) 932-7015, vangilder@asabe. ANSI/ASAE EP364.4-FEB-2013 (R2018), org Installation and Maintenance of Farm ANSI/ASABE/ISO 3767-1:2017 APR17, Tractors, Standby Electric Power machinery for agriculture and forestry, ANSI/ASABE/ISO 5008-2002 W/Cor. 1 MAY2006 Approved: 3/5/2018 powered lawn and garden equipment - (R2015), Agricultural wheeled tractors and Carla VanGilder, (269) 932-7015, vangilder@asabe. Symbols for operator controls and other field machinery - Measurement of whole- org displays - Part 1: Common symbols body vibration of the operator Approved: 4/3/2017 Approved: 12/22/2015 ANSI/ASAE EP378.4 JUN2010 (R2014), Floor and Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. Suspended Loads on Agricultural Structures org org Due to Use Approved: 1/12/2015 ANSI/ASABE/ISO 3767-2:APR17, Tractors, ANSI/ASABE/ISO 5700--2013 SEP2017, Tractors Carla VanGilder, (269) 932-7015, vangilder@asabe. machinery for agriculture and forestry, for agriculture and forestry - Roll-over org powered lawn and garden equipment - protective structures - Static test method Symbols for operator controls and other and acceptance conditions ANSI/ASAE EP389.2 JUN1993 (R2015), Auger displays - Part 2: Symbols for agricultural Approved: 9/29/2017 Flighting Design Considerations tractors and machinery Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 1/28/2015 Approved: 4/3/2017 org Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. org org ANSI/ASABE/ISO AD500-1:2015 (R2019), Agricultural tractors — Rear-mounted power ANSI/ASAE EP400.3-2007 (R2017), Designing ANSI/ASABE/ISO 3776-1-2006 (R2016), Tractors take-off types 1, 2, 3 and 4 — Part 1: General and Constructing Irrigation Wells and machinery for agriculture - Seat belts - specifications, safety requirements, Approved: 11/28/2017 Part 1: Anchorage location requirements dimensions for master shield and clearance Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 12/1/2016 zone org Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 5/21/2019 ANSI/ASAE EP403.4-NOV-2011 (R2015), Design org Carla VanGilder, (269) 932-7015, vangilder@asabe. org of Anaerobic Lagoons for Animal Waste ANSI/ASABE/ISO 3776-2-2016 , Tractors and Approved: 12/11/2015 machinery for agriculture - Seat belts - Part 2: ANSI/ASABE/ISO TS 28924-2015, Agricultural Carla VanGilder, (269) 932-7015, vangilder@asabe. Anchorage strength requirements machinery - Guards for moving parts of org Approved: 2/25/2016 power transmission - Guard opening without ANSI/ASAE EP411.5-2012 (R2016), Guidelines Carla VanGilder, (269) 932-7015, vangilder@asabe. tool org Approved: 9/10/2015 for Measuring and Reporting Environmental Parameters for Plant Experiments in Growth Carla VanGilder, (269) 932-7015, vangilder@asabe. ANSI/ASABE/ISO 3776-3:2015, Tractors and org Chambers machinery for agriculture - Seat belts - Part 3: Approved: 12/2/2016 Requirements for assemblies ANSI/ASAE 5687-OCT2018, Equipment for Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 10/21/2015 harvesting Combine harvesters org Carla VanGilder, (269) 932-7015, vangilder@asabe. Determination and designation of grain tank org capacity and unloading device performance Approved: 10/31/2018 Carla VanGilder, (269) 932-7015, vangilder@asabe. org

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 41 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASAE EP446.3-2008 (R2017), Loads ANSI/ASAE S279.17-2013 (R2017), Lighting and ANSI/ASAE S351-1982 (R2017), Hand Signals for Exerted by Irish Potatoes in Shallow Bulk Marking of Agricultural Equipment on Use in Agriculture Storage Structures Highways Approved: 1/23/2017 Approved: 11/28/2017 Approved: 12/21/2017 Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. org org org ANSI/ASAE S354.7-SEP2018, Safety for ANSI/ASAE EP484.3-DEC2017, Diaphragm ANSI/ASAE S289.2 FEB1998 (R2018), Concrete Farmstead Equipment Design of Metal-Clad, Wood-Frame Slip-Form Canal Linings Approved: 9/6/2018 Rectangular Buildings Approved: 11/29/2018 Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 12/21/2017 Carla VanGilder, (269) 932-7015, vangilder@asabe. org Carla VanGilder, (269) 932-7015, vangilder@asabe. org org ANSI/ASAE S355.5 MONYEAR-2015, Safety ANSI/ASAE S296.5 DEC2003 (R2018), General Practices for Agricultural Front-End Loaders ANSI/ASAE EP486.3-2017, Shallow Post and Pier Terminology for Traction of Agricultural Approved: 9/25/2015 Foundation Design Traction and Transport Devices and Vehicles Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 9/28/2017 Approved: 12/17/2018 org Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. org org ANSI/ASAE S358.3 MAY2012 (R2017), Moisture Measurement - Forages ANSI/ASAE EP545 MAR1995 (R2015), Loads ANSI/ASAE S303.4-2007 (R2017), Test Approved: 1/3/2017 Exerted by Free-Flowing Grain on Shallow Procedure for Solids-Mixing Equipment for Carla VanGilder, (269) 932-7015, vangilder@asabe. Storage Structures Animal Feeds org Approved: 1/26/2015 Approved: 12/11/2017 Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. ANSI/ASAE S362.2 JAN1993 (R2015), Wiring and org org Equipment for Electrically Driven or Controlled Irrigation Machines ANSI/ASAE EP559.1 W/Corr. 1 AUG2010 ANSI/ASAE S315.5-AUG2018, Agricultural Baling Approved: 1/9/2015 (R2014), Design Requirements and Bending Twine for Automatic Balers Carla VanGilder, (269) 932-7015, vangilder@asabe. Properties for Mechanically-Laminated Wood Approved: 8/3/2018 org Assemblies Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 1/12/2015 org ANSI/ASAE S365.9-2011 (R2017), Braking Carla VanGilder, (269) 932-7015, vangilder@asabe. System Test Procedures and Braking org ANSI/ASAE S318.18-JUN2017, Safety for Performance Criteria for Agricultural Field Agricultural Field Equipment Equipment ANSI/ASAE EP576.2-2012 (R2017), Lighting And Approved: 6/28/2017 Approved: 1/23/2017 Marking Of Animal-Drawn Equipment Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 12/21/2017 org org Carla VanGilder, (269) 932-7015, vangilder@asabe. org ANSI/ASAE S319.4-2008 (R2017), Method of ANSI/ASAE S375.2-1996 (R2018), Capacity Determining and Expressing Fineness of Feed Ratings and Unloading Dimensions for Cotton ANSI/ASAE S229.6-DEC1976 (R2017), Baling Materials by Sieving Harvester Baskets Wire for Automatic Balers Approved: 12/11/2017 Approved: 12/17/2018 Approved: 12/21/2017 Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. org org org ANSI/ASAE S331.6-2015, Implement Power ANSI/ASAE S376.3-2016, Design, Installation ANSI/ASAE S261.7-OCT96 (R2015), Design and Take-Off Driveline Specifications and Performance of Underground, Installation of Nonreinforced Concrete Approved: 8/26/2015 Thermoplastic Irrigation Pipelines Irrigation Pipe Systems Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 2/19/2016 Approved: 12/3/2015 org Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. org org ANSI/ASAE S338.5 MAY2006 (R2016), Field Equipment for Agriculture-Safety Chain for ANSI/ASAE S377-1990 (R2015), Application of ANSI/ASAE S277.2-1992 (R2017), Mounting Towed Equipment Remote Linear Control Devices to Lawn and Brackets and Socket for Warning Lamp and Approved: 1/22/2016 Garden Ride-on Tractor Attachments and Slow-Moving Vehicle (SMV) Identification Carla VanGilder, (269) 932-7015, vangilder@asabe. Implements Emblem org Approved: 5/28/2015 Approved: 12/22/2017 Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. ANSI/ASAE S343.4-2015, Terminology for org org Combines and Grain Harvesting Approved: 6/4/2015 Carla VanGilder, (269) 932-7015, vangilder@asabe. org

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 42 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASAE S390.6 (ISO 12934:2013)-DEC16, ANSI/ASAE S436.1-1997 (R2016), Test ANSI/ASAE/ISO 9190-2002 (R2017), Lawn and Tractors and machinery for agriculture and Procedure for Determining the Uniformity of garden ride-on (riding) tractors - Drawbar forestry - Basic types - Vocabulary Water Distribution of Center Pivot and Approved: 1/4/2017 Approved: 12/1/2016 Lateral Move Irrigation Machines Equipment Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. with Spray or Sprinkler Nozzles org org Approved: 12/2/2016 Carla VanGilder, (269) 932-7015, vangilder@asabe. ANSI/ASAE/ISO 9191-2002 (R2017), Lawn and ANSI/ASAE S392.2 APR2005 (R2015), Cotton org garden ride-on (riding) tractors - Three- Module Builder and Transporter Standard point hitch Approved: 1/9/2015 ANSI/ASAE S448.2-2014 (R2018), Thin-Layer Approved: 1/4/2017 Carla VanGilder, (269) 932-7015, vangilder@asabe. Drying of Agricultural Crops Carla VanGilder, (269) 932-7015, vangilder@asabe. org Approved: 1/24/2018 org Carla VanGilder, (269) 932-7015, vangilder@asabe. ANSI/ASAE S396.-JUN2016 , Combine Capacity org ANSI/ASAE/ISO 9192-2002 (R2017), Lawn and and Performance Test Procedure garden ride-on (riding) tractors - One-point Approved: 6/30/2016 ANSI/ASAE S459-FEB93 (R2017), Shear and tubular sleeve hitch Carla VanGilder, (269) 932-7015, vangilder@asabe. Three-Point Bending Test of Animal Bone Approved: 1/4/2017 org Approved: 1/3/2017 Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. org ANSI/ASAE S397.4 NOV2013 (R2018), Electrical org Service and Equipment for Irrigation ASB (ASC Z50) (AMERICAN SOCIETY OF Approved: 12/31/2018 ANSI/ASAE S472-MAR 88 (R2017), Terminology BAKING) Carla VanGilder, (269) 932-7015, vangilder@asabe. for Forage Harvesters and Forage Harvesting org Approved: 1/30/2017 ANSI/ASB Z50.1-2006 (R2016), Bakery Carla VanGilder, (269) 932-7015, vangilder@asabe. Equipment - Safety Standards ANSI/ASAE S401.2-AUG93 (R2017), Guidelines org Approved: 7/14/2016 for Use of Thermal Insulation in Agricultural www.asbe.org Buildings ANSI/ASAE S478.1-2012 (R2016), Roll-Over Approved: 11/28/2017 Protective Structures (ROPS) for Compact ANSI/ASB Z50.2-2015, Bakery Equipment - Carla VanGilder, (269) 932-7015, vangilder@asabe. Utility Tractors Sanitation Standards org Approved: 12/27/2016 Approved: 10/12/2015 Carla VanGilder, (269) 932-7015, vangilder@asabe. www.asbe.org ANSI/ASAE S418.1 OCT2010 (R2014), org Dimensions for Cylindrical Hydraulic Couplers ASC X9 (ACCREDITED STANDARDS for Lawn and Garden Tractors ANSI/ASAE S483.2 AUG2011 (R2016), Rotary COMMITTEE X9, INCORPORATED) Approved: 1/12/2015 Mower Blade Ductility Test Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 3/9/2016 ANSI X9-112-2-2014, Wireless Management org Carla VanGilder, (269) 932-7015, vangilder@asabe. and Published Security - Part 2: POS and ATM org Approved: 10/21/2014 ANSI/ASAE S422.1-2015, Mapping Symbols and Isabel Bailey, ASC X9; [email protected] Nomenclature for Erosion and Sediment ANSI/ASAE S515-JAN94 (R2017), Pallet Load Control Plans for Land Disturbing Activities Transfer System for Vegetable Harvesters, ANSI X9.100-10-2016, Paper Specifications for Approved: 12/7/2015 Shuttle Vehicles, and Road Trucks MICR Documents Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 12/21/2017 Approved: 8/2/2016 org Carla VanGilder, (269) 932-7015, vangilder@asabe. Isabel Bailey, ASC X9; [email protected] org ANSI/ASAE S424.1-SEP92 (R2017), Method of ANSI X9.100-110-2015, Document Imaging Determining and Expressing Particle Size of ANSI/ASAE S521-FEB93 (R2016), Method of Compatibility Chopped Forage Materials by Screening Determining Peanut Blanchability Approved: 9/16/2015 Approved: 1/30/2017 Approved: 12/2/2016 Isabel Bailey, ASC X9; [email protected] Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. org org ANSI X9.100-111-2018, Check Endorsements Approved: 8/7/2018 ANSI/ASAE S433.1 JAN2019, Loads Exerted by ANSI/ASAE S572.2-JUL2018, Spray Nozzle Isabel Bailey, ASC X9; [email protected] Free-Flowing Grain on Bins Classification by Droplet Spectra Approved: 1/11/2019 Approved: 7/18/2018 ANSI X9.100-120-2015, Bank Deposit Tickets Carla VanGilder, (269) 932-7015, vangilder@asabe. Carla VanGilder, (269) 932-7015, vangilder@asabe. Approved: 10/2/2015 org org Isabel Bailey, ASC X9; [email protected]

ANSI/ASAE S584.3-2013 (R2017), Agricultural ANSI X9.100-130-2011 (R2017), Universal Equipment: Speed Identification Symbol (SIS) Interbank Batch/Bundle Ticket Approved: 12/21/2017 Approved: 1/3/2017 Carla VanGilder, (269) 932-7015, vangilder@asabe. Isabel Bailey, ASC X9; [email protected] org

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 43 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI X9.100-140-2018, Image Replacement ANSI X9.100-188-2018, Return Reasons for ANSI X9.105-1-2009/ISO 8583-1-2009 (R2019), Document (IRD) Check Image Exchange and IRDs Financial transaction card originated Approved: 8/10/2018 Approved: 8/3/2018 messages - Interchange message Isabel Bailey, ASC X9; [email protected] Isabel Bailey, ASC X9; [email protected] specifications - Part 1: Messages, data elements, and code values ANSI X9.100-150-2010 (R2017), Check Carrier ANSI X9.100-189-2019, Savings Bond Paying Approved: 2/13/2019 Envelopes Agent Virtual Stamp Isabel Bailey, ASC X9; [email protected] Approved: 1/3/2017 Approved: 8/8/2019 Isabel Bailey, ASC X9; [email protected] Isabel Bailey, ASC X9; [email protected] ANSI X9.105-3-2009/ISO 8583-3-2008 (R2019), Financial transaction card originated ANSI X9.100-151-2010 (R2017), Check ANSI X9.100-20 Parts 1, 2 & 3-2015, Print & Test messages - Interchange message Correction Strips Specifications for Magnetic Ink Printing specifications - Part 3: Maintenance Approved: 1/6/2017 Approved: 5/5/2015 Procedures for messages, data elements and Isabel Bailey, ASC X9; [email protected] Isabel Bailey, ASC X9; [email protected] code values Approved: 3/19/2019 ANSI X9.100-160-1-2015, Magnetic Ink Printing ANSI X9.100-30-2011 (R2017), Optical Isabel Bailey, ASC X9; [email protected] (MICR) Part 1: Placement and Location Background Measurement for MICR Approved: 11/10/2015 Documents ANSI X9.106-2003/ISO 18245 (R2019), Retail Isabel Bailey, ASC X9; [email protected] Approved: 1/19/2017 Financial Services - Merchant Category Codes Isabel Bailey, ASC X9; [email protected] Approved: 2/8/2019 ANSI X9.100-160 Part 2-2014, Placement and Isabel Bailey, ASC X9; [email protected] Location of Magnetic Ink Printing (MICR) - ANSI X9.100-40-1, X9.100-40-2-2006 (R2017), Part 2: EPC Field Use Specifications for Check Image Tests Part 1: ANSI X9.107-2003/ISO 4909, Bank cards- Approved: 11/24/2014 Definition of Elements and Structures Part 2: Magnetic stripe data content for track 3 Isabel Bailey, ASC X9; [email protected] Application and Registration Procedures Approved: 12/17/2003 Approved: 10/11/2017 Isabel Bailey, ASC X9; [email protected] ANSI X9.100-161-2010 (R2017), Creating MICR Isabel Bailey, ASC X9; [email protected] Document Specification Forms ANSI X9.110-2008 (R2013), Transfer of Location Approved: 1/6/2017 ANSI X9.101/ISO 6166-2003 (R2013), Securities of Electronic Contracts Isabel Bailey, ASC X9; [email protected] and related financial instruments – Approved: 7/8/2013 International securities identification Isabel Bailey, ASC X9; [email protected] ANSI X9.100-170-2010 (R2017), Check Fraud numbering systems (ISIN) Deterrent Icon Approved: 4/15/2013 ANSI X9.111-2018, Penetration Testing within Approved: 1/6/2017 Isabel Bailey, ASC X9; [email protected] the Financial Services Industry Isabel Bailey, ASC X9; [email protected] Approved: 2/28/2018 ANSI X9.102-2008 (R2017), Symmetric Key Isabel Bailey, ASC X9; [email protected] ANSI X9.100-180-2006 (S2018), Specifications Cryptography for the Financial Services for Electronic Exchange of Check and Image Industry - Wrapping of Keys and Associated ANSI X9.112-1-2016, Wireless Management and Data (Non-Domestic) Data Security - Part 1: General Requirements Approved: 8/10/2018 Approved: 2/2/2017 Approved: 5/18/2016 Isabel Bailey, ASC X9; [email protected] Isabel Bailey, ASC X9; [email protected] Isabel Bailey, ASC X9; [email protected]

ANSI X9.100-181-2014, TIFF Image Format for ANSI X9.103-2004 (R2018), Motor Vehicle Retail ANSI X9.112-3-2018, Wireless Management and Image Exchange Sale and Lease Electronic Contracting Security Part 3: Mobile Banking Approved: 12/22/2014 Approved: 3/6/2018 Approved: 7/10/2018 Isabel Bailey, ASC X9; [email protected] Isabel Bailey, ASC X9; [email protected] Isabel Bailey, ASC X9; [email protected]

ANSI X9.100-182-2011 (R2017), X9.100-182 ANSI X9.104-1-2004 (R2017), Financial ANSI X9.116-1, ISO 20022-1-2008, Financial -2011 Bulk Image and Data Delivery transactions card originated messages - Card Services - UNIversal Financial Industry (standard, XSD Schema, and TR 40) acceptor to acquiring host messages: message scheme - Part 1: Overall Approved: 1/6/2017 Messages, data elements and code values methodology and format specifications for Isabel Bailey, ASC X9; [email protected] Approved: 1/3/2017 inputs and outputs from ISO 20022 Isabel Bailey, ASC X9; [email protected] repository ANSI X9.100-183-2010 (R2017), Electronic Approved: 10/21/2008 Check Adjustments ANSI X9.104, Part 2-2004 (R2016), Financial Isabel Bailey, ASC X9; [email protected] Approved: 1/6/2017 transaction card originated messages - Card Isabel Bailey, ASC X9; [email protected] acceptor to acquiring host messages - Part 2 ANSI X9.116-2, ISO 20022-2-2008, Financial Convenience store and petroleum marketing services - UNIversal Financial Industry ANSI X9.100-187-2016, Specifications for industry message scheme - Part 2: Roles and Electronic Exchange of Check and Image Data Approved: 12/15/2016 responsibilities of the registration bodies - Domestic Isabel Bailey, ASC X9; [email protected] Approved: 10/21/2008 Approved: 8/10/2016 Isabel Bailey, ASC X9; [email protected] Isabel Bailey, ASC X9; [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 44 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI X9.117-2012, Secure Remote Access ANSI X9.24 Part 1-2017, Retail Financial Services ANSI X9.80-2005 (R2013), Prime Number Mutual Authentication Symmetric Key Management - Part 1: Using Generation, Primality Testing, and Primality Approved: 11/30/2012 Symmetric Techniques Certificates Isabel Bailey, ASC X9; [email protected] Approved: 6/8/2017 Approved: 4/15/2013 Isabel Bailey, ASC X9; [email protected] Isabel Bailey, ASC X9; [email protected] ANSI X9.119-1-2016, Retail Financial Services - Requirements for Protection of Sensitive ANSI X9.42-2003 (R2013), Public Key ANSI X9.82-2-2015, X9.82-2 Random Number Payment Card Data - Part 1: Using Encryption Cryptography for Financial Services Industry: Generation - Part 2: Entrophy Sources Methods Agreement of Symmetric Keys Using Discrete Approved: 9/14/2015 Approved: 5/19/2016 Logarithm Cryptography Isabel Bailey, ASC X9; [email protected] Isabel Bailey, ASC X9; [email protected] Approved: 4/15/2013 Isabel Bailey, ASC X9; [email protected] ANSI X9.82-3-2007 (R2017), Random Number ANSI X9.119-2-2017, Requirements for Generation Part 3: Deterministic Random Bil Protection of Sensitive Payment Card Data - ANSI X9.44-2007 (R2017), Key Establishment Generator Mechanisms Part 2: Using Tokenization Methods Using Integer Factorization Cryptography Approved: 1/11/2017 Approved: 8/3/2017 Approved: 2/2/2017 Isabel Bailey, ASC X9; [email protected] Isabel Bailey, ASC X9; [email protected] Isabel Bailey, ASC X9; [email protected] ANSI X9.82-4-2011 (R2017), Random Number ANSI X9.12-1991 (S2017), Specifications for ANSI X9.58-2010, Financial transaction Generation - Part 4: Random Bit Generator Fully Registered Municipal Securities messages - Electronic benefits transfer (EBT) - Constructions Approved: 12/18/2017 Food Stamps Approved: 2/2/2017 Isabel Bailey, ASC X9; [email protected] Approved: 6/26/2013 Isabel Bailey, ASC X9; [email protected] Isabel Bailey, ASC X9; [email protected] ANSI X9.121-2016, Balance and Transaction ANSI X9.82 Part 1-2006 (R2013), Random Reporting Standard BTRS Version 3 (BTR3) ANSI X9.59-2006 (R2013), Electronic Commerce Number Generation Part 1: Overview and Approved: 2/16/2016 for the Financial Services Industry: Account- Basic Principles Isabel Bailey, ASC X9; [email protected] Based Secure Payment Objects Approved: 4/15/2013 Approved: 4/15/2013 Isabel Bailey, ASC X9; [email protected] ANSI X9.124-2-2018, Symmetric Key Isabel Bailey, ASC X9; [email protected] Cryptography For the Financial Services ANSI X9.84-2018, Biometric Information Industry — Format Preserving Encryption- ANSI X9.6-2014, Committee on Uniform Management & Security for the Financial Part 2:Key Stream with Counter Mode Security Identification Procedures Securities Services Industry Approved: 2/14/2018 Identification (CUSIP) Approved: 4/20/2018 Isabel Bailey, ASC X9; [email protected] Approved: 12/23/2014 Isabel Bailey, ASC X9; [email protected] Isabel Bailey, ASC X9; [email protected] ANSI X9.126/ISO 17442-2013, Legal Entity ANSI X9.92-1-2009 (R2017), Public Key Identifier (LEI) ANSI X9.63-2011 (R2017), Key Agreement and Cryptography for the Financial Services Approved: 3/13/2013 Key Management Using Elliptic Curve-Based Industry Digital Signature Algorithms Giving Isabel Bailey, ASC X9; [email protected] Cryptography Partial Message Recovery - Part 1: Elliptic Approved: 2/2/2017 Curve Pintsov-Vanstone Signatures (ECPVS) ANSI X9.129-2017, Electronic File Format Isabel Bailey, ASC X9; [email protected] Approved: 2/2/2017 Standards for Presentment and Remittance Isabel Bailey, ASC X9; [email protected] of Legal Orders ANSI X9.69-2017, Framework for Key Approved: 12/12/2017 Management Extensions ANSI X9.93-1-2014, Financial Transaction Isabel Bailey, ASC X9; [email protected] Approved: 9/19/2017 Message - Electronic Benefits Transfer - Part Isabel Bailey, ASC X9; [email protected] 1: Messages ANSI X9.131-2015, Financial transaction Approved: 2/6/2014 messages - Electronic benefits transfer (EBT) ANSI X9.73-2017, Cryptographic Message Isabel Bailey, ASC X9; [email protected] – WIC retailer interface standard for smart Syntax - ASN.1 and XML cards Approved: 9/28/2017 ANSI X9.93-2-2014, Financial transaction Approved: 3/24/2015 Isabel Bailey, ASC X9; [email protected] messages - Electronic Benefits Transfer (EBT) Isabel Bailey, ASC X9; [email protected] - Part 2: Files ANSI X9.79 - Part 4-2013, Public Key Approved: 2/6/2014 ANSI X9.24-2-2016, Retail Financial Services Infrastructure (PKI) – Part 4: Asymmetric Key Isabel Bailey, ASC X9; [email protected] Symmetric Key Management - Part 2: Using Management Asymmetric Techniques for the Distribution Approved: 2/5/2013 ANSI X9.95-2016, Trusted Time Stamp of Symmetric Keys Isabel Bailey, ASC X9; [email protected] Management and Security Approved: 11/16/2016 Approved: 12/1/2016 Isabel Bailey, ASC X9; [email protected] ANSI X9.8-1-2019/ISO 9564-1-2019, Personal Isabel Bailey, ASC X9; [email protected] identification number (PIN) management and ANSI X9.24-3-2017, X9.24-3 Retail Financial security — Part 1: Basic principles and Services Symmetric Key Management Part 3: requirements for PINs in card-based systems Derived Unique Key per Transaction Approved: 8/22/2019 Approved: 10/11/2017 Isabel Bailey, ASC X9; [email protected] Isabel Bailey, ASC X9; [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 45 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI X9.97-1-2009 (R2017), Secure ANSI/ASCE/EWRI 42-2017, Standard Practice for ANSI/ASCE/EWRI 63-2016, Standard Guidelines Cryptographic Devices (Retail) - Part 1: the Design, Conduct, and Evaluation of for the Installation of Stormwater Concepts, Requirements and Evaluation Operational Precipitation Enhancement Impoundments Methods Projects Approved: 10/5/2016 Approved: 2/2/2017 Approved: 11/7/2016 Leonard Kusek, 703-295-6176, [email protected] Isabel Bailey, ASC X9; [email protected] Leonard Kusek, 703-295-6176, [email protected] ANSI/ASCE/EWRI 64-2016, Standard Guidelines ANSI X9.97-2-2009 (R2017), Secure ANSI/ASCE/EWRI 44-2013, Standard Practice for for the Operation and Maintenance of Cryptographic Devices (Retail) - Part 2: the Design and Operation of Supercooled Fog Stormwater Impoundments Security Compliance Checklists for Devices Dispersal Projects Approved: 10/11/2016 Used in Financial Transactions Approved: 9/9/2013 Leonard Kusek, 703-295-6176, [email protected] Approved: 2/2/2017 Leonard Kusek, 703-295-6176, [email protected] Isabel Bailey, ASC X9; [email protected] ANSI/ASCE/EWRI 65-2016, Calculation of the ANSI/ASCE/EWRI 45-46-47-2016, ASCE/EWRI 45 Saturated Hydraulic Conductivity of Fine- ANSI X9.98-2010 (R2017), Lattice-Based Standard Guidelines for the Design of Urban Grained Soils Polynomial Public Key Encryption Algorithm - Stormwater Systems ASCE/EWRI 46 Approved: 11/16/2016 Part 1: Key Establishment; Part 2: Data Standard Guidelines for the Installation of Leonard Kusek, 703-295-6176, [email protected] Encryption Urban Stormwater Systems ASCE/EWRI 47 Approved: 2/2/2017 Standard Guidelines for the Operation and ANSI/ASCE/EWRI 66-2017, Management Isabel Bailey, ASC X9; [email protected] Maintenance of Urban Stormwater Systems Practices for Control of Erosion and Sediment Approved: 8/10/2016 from Construction Activities ANSI X9.99/ISO 22307-2009, Financial Services - Leonard Kusek, 703-295-6176, [email protected] Approved: 2/17/2017 Privacy Impact Assessment Leonard Kusek, 703-295-6176, [email protected] Approved: 8/17/2009 ANSI/ASCE/EWRI 50-2016, Standard Guideline Isabel Bailey, ASC X9; [email protected] for Fitting Saturated Hydraulic Conductivity ANSI/ASCE/SEI 25-2016, Earthquake Actuated Using Probability Density Functions Gas Shutoff Valves ASCA (ACCREDITED SNOW CONTRACTORS Approved: 11/16/2016 Approved: 9/2/2016 ASSOCIATION) Leonard Kusek, 703-295-6176, [email protected] Leonard Kusek, 703-295-6176, [email protected]

ANSI/ASCA A1000-2019, Accredited Snow ANSI/ASCE/EWRI 51-2016, Standard Guideline ASHRAE (AMERICAN SOCIETY OF HEATING, Contractors Association for Calculating the Effective Saturated REFRIGERATING AND AIR-CONDITIONING Approved: 7/1/2019 Hydraulic Conductivity ENGINEERS, INC.) Approved: 11/16/2016 ASCE (AMERICAN SOCIETY OF CIVIL Leonard Kusek, 703-295-6176, [email protected] ANSI/ASHRA 62.1c-2018, Ventilation for ENGINEERS) Acceptable Indoor Air Quality ANSI/ASCE/EWRI 54-2016, Standard Guideline Approved: 7/25/2018 ANSI/ASCE T&DI 21-2013, Automated People for the Geostatistical Estimation and Block- Mover Standards Manager of Standards Averaging of Homogeneous and Isotropic Attn: Jim Heldenbrand ASHRAE Approved: 3/26/2013 Saturated Hydraulic Conductivity 1791 Tullie Circle, N.E. Leonard Kusek, 703-295-6176, [email protected] Approved: 11/16/2016 Atlanta Ge 30329-5478 Leonard Kusek, 703-295-6176, [email protected] ANSI/ASCE/CI 67-2017, SCHEDULE DELAY ANSI/ASHRA 62.1r-2018, Ventilation for ANALYSIS STANDARD ANSI/ASCE/EWRI 56-2011, Guidelines for the Acceptable Indoor Air Quality Approved: 4/4/2017 Physical Security of Water Utilities Approved: 7/25/2018 Leonard Kusek, 703-295-6176, [email protected] Approved: 2/3/2011 Manager of Standards Leonard Kusek, 703-295-6176, [email protected] Attn: Jim Heldenbrand ASHRAE ANSI/ASCE/EWRI 12/13/14-2013, ASCE/EWRI 1791 Tullie Circle, N.E. 12-05 Standard Guidelines for the Design of ANSI/ASCE/EWRI 56-10/57-10-2014, Guidelines Atlanta Ge 30329-5478 Urban Subsurface Drainage; ASCE/EWRI 13 for the Physical Security of Water Utilities; ANSI/ASHRAE 135ak-2012, BACnet - A Data -05 Standard Guidelines for the Installation of Guidelines for the Physical Security of Communication Protocol for Building Urban Subsurface Drainage; and ASCE/EWRI Wastewater/Stormwater Utilities Automation and Control Networks 14-05 Standard Guidelines for the Operation Approved: 10/2/2014 and Maintenance of Urban Subsurface Approved: 6/28/2012 Leonard Kusek, 703-295-6176, [email protected] Drainage with material developed within the Manager of Standards past five years. ANSI/ASCE/EWRI 57-2011, Guidelines for the Attn: Jim Heldenbrand ASHRAE Approved: 4/24/2013 Physical Security of Wastewater/Stormwater 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Leonard Kusek, 703-295-6176, [email protected] Utilities Approved: 2/3/2011 ANSI/ASHRAE 62.2k-2016, Ventilation and ANSI/ASCE/EWRI 39-2015, Guidelines for Leonard Kusek, 703-295-6176, [email protected] Acceptable Indoor Air Quality in Low-Rise Operational Hail Suppression Programs Residential Buildings Approved: 3/5/2015 ANSI/ASCE/EWRI 62-2016, Standard Guidelines Approved: 6/30/2016 Leonard Kusek, 703-295-6176, [email protected] for the Design of Stormwater Impoundments Manager of Standards Approved: 10/5/2016 Attn: Jim Heldenbrand ASHRAE Leonard Kusek, 703-295-6176, [email protected] 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 46 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE 135.1a-2006, Method of Test for ANSI/ASHRAE 135a-2005, BACnet - A Data ANSI/ASHRAE 135ai-2014, BACnet - A Data Conformance to BACnet Communication Protocol for Building Communication Protocol for Building Approved: 1/27/2006 Automation and Control Networks Automation and Control Networks Manager of Standards Approved: 2/10/2005 Approved: 12/31/2014 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE 135.1b-2009, Method of Test for Conformance to BACnet ANSI/ASHRAE 135aa-2012, A Data ANSI/ASHRAE 135aj-2016, BACnet - A Data Approved: 6/25/2009 Communication Protocol for Building Communication Protocol for Building Manager of Standards Automation and Control Networks Automation and Control Networks Attn: Jim Heldenbrand ASHRAE Approved: 7/26/2012 Approved: 3/1/2016 1791 Tullie Circle, N.E. Manager of Standards Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. ANSI/ASHRAE 135.1c-2007, Method of Test for Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Conformance to BACnet Approved: 6/28/2007 ANSI/ASHRAE 135ad-2011, BACnet - A Data ANSI/ASHRAE 135al-2014, BACnet - A Data Manager of Standards Communication Protocol for Building Communication Protocol for Building Attn: Jim Heldenbrand ASHRAE Automation and Control Networks Automation and Control Networks 1791 Tullie Circle, N.E. Approved: 6/30/2011 Approved: 12/31/2014 Atlanta Ge 30329-5478 Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE 135.1i-2011, Method of Test for 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Conformance to BACnet Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Approved: 2/3/2011 Manager of Standards ANSI/ASHRAE 135ae-2011, BACnet - A Data ANSI/ASHRAE 135am-2016, BACnet - A Data Attn: Jim Heldenbrand ASHRAE Communication Protocol for Building Communication Protocol for Building 1791 Tullie Circle, N.E. Automation and Control Networks Automation and Control Networks Atlanta Ge 30329-5478 Approved: 6/30/2011 Approved: 5/2/2016 Manager of Standards Manager of Standards ANSI/ASHRAE 135.1j-2012, Method of Test for Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Conformance to BACnet 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Approved: 6/28/2012 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Manager of Standards Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE 135af-2011, BACnet - A Data ANSI/ASHRAE 135aq-2016, BACnet - A Data 1791 Tullie Circle, N.E. Communication Protocol for Building Communication Protocol for Building Atlanta Ge 30329-5478 Automation and Control Networks Automation and Control Networks Approved: 6/30/2011 Approved: 3/1/2016 ANSI/ASHRAE 135.1p-2018, Method of Test for Manager of Standards Manager of Standards Conformance to BACnet Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Approved: 6/1/2018 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. ANSI/ASHRAE 135ag-2011, BACnet - A Data ANSI/ASHRAE 135as-2014, BACnet - A Data Atlanta Ge 30329-5478 Communication Protocol for Building Communication Protocol for Building Automation and Control Networks Automation and Control Networks ANSI/ASHRAE 135.1q-2018, Method of Test for Approved: 2/3/2011 Approved: 12/31/2014 Conformance to BACnet Manager of Standards Manager of Standards Approved: 12/7/2018 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE 135ah-2011, BACnet - A Data ANSI/ASHRAE 135ay-2014, BACnet - A Data Communication Protocol for Building Communication Protocol for Building ANSI/ASHRAE 135.1r-2018, Method of Test for Automation and Control Networks Automation and Control Networks Conformance to BACnet Approved: 3/3/2011 Approved: 12/31/2014 Approved: 6/1/2018 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 47 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE 135b-2008, BACnet - A Data ANSI/ASHRAE 135bh-2016, BACnet - A Data ANSI/ASHRAE 135d-2006, BACnet - A Data Communication Protocol for Building Communication Protocol for Building Communication Protocol for Building Automation and Control Networks Automation and Control Networks Automation and Control Networks Approved: 10/27/2008 Approved: 3/1/2016 Approved: 6/30/2006 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE 135ba-2016, BACnet - A Data ANSI/ASHRAE 135bi-2018, BACnet - A Data ANSI/ASHRAE 135e-2007, BACnet - A Data Communication Protocol for Building Communication Protocol for Building Communication Protocol for Building Automation and Control Networks Automation and Control Networks Automation and Control Networks Approved: 5/2/2016 Approved: 6/14/2018 Approved: 3/26/2007 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE 135bc-2016, BACnet - A Data ANSI/ASHRAE 135bk-2018, BACnet - A Data ANSI/ASHRAE 135f-2007, BACnet - A Data Communication Protocol for Building Communication Protocol for Building Communication Protocol for Building Automation and Control Networks Automation and Control Networks Automation and Control Networks Approved: 5/2/2016 Approved: 6/14/2018 Approved: 3/26/2007 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE 135bd-2018, BACnet - A Data ANSI/ASHRAE 135bl-2018, BACnet - A Data ANSI/ASHRAE 135j-2009, BACnet - A Data Communication Protocol for Building Communication Protocol for Building Communication Protocol for Building Automation and Control Networks Automation and Control Networks Automation and Control Networks Approved: 6/14/2018 Approved: 6/14/2018 Approved: 6/25/2009 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE 135be-2018, BACnet _ A Data ANSI/ASHRAE 135bm-2018, BACnet - A Data ANSI/ASHRAE 135l-2009, BACnet - A Data Communication Protocol for Building Communication Protocol for Building Communication Protocol for Building Automation and Control Networks Automation and Control Networks Automation and Control Networks Approved: 6/14/2018 Approved: 6/14/2018 Approved: 6/25/2009 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE 135bf-2016, BACnet - A Data ANSI/ASHRAE 135bn-2018, BACnet - A Data ANSI/ASHRAE 135m-2008, BACnet - A Data Communication Protocol for Building Communication Protocol for Building Communication Protocol for Building Automation and Control Networks Automation and Control Networks Automation and Control Networks Approved: 3/1/2016 Approved: 6/14/2018 Approved: 10/27/2008 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE 135bg-2016, BACnet - A Data ANSI/ASHRAE 135bp-2018, BACnet - A Data ANSI/ASHRAE 135o-2009, BACnet - A Data Communication Protocol for Building Communication Protocol for Building Communication Protocol for Building Automation and Control Networks Automation and Control Networks Automation and Control Networks Approved: 3/1/2016 Approved: 6/14/2018 Approved: 6/25/2009 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 48 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE 135q-2009, BACnet - A Data ANSI/ASHRAE 147c-2018, Reducing the Release ANSI/ASHRAE 15c-2007, Safety Standard for Communication Protocol for Building of Halogenated Refrigerants from Refrigeration Systems Automation and Control Networks Refrigerating and Air-Conditioning Equipment Approved: 3/3/2007 Approved: 1/29/2009 and Systems Manager of Standards Manager of Standards Approved: 3/27/2018 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE 15c-2017, Safety Standard for ANSI/ASHRAE 135r-2009, BACnet - A Data Refrigeration Systems Communication Protocol for Building ANSI/ASHRAE 147d-2018, Reducing the Release Approved: 6/29/2017 Automation and Control Networks of Halogenated Refrigerants from Manager of Standards Approved: 6/25/2009 Refrigerating and Air-Conditioning Equipment Attn: Jim Heldenbrand ASHRAE Manager of Standards and Systems 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Approved: 3/27/2018 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Manager of Standards ANSI/ASHRAE 15d-2008, Safety Standard for Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Refrigeration Systems ANSI/ASHRAE 135s-2009, BACnet - A Data Atlanta Ge 30329-5478 Approved: 2/27/2008 Communication Protocol for Building Manager of Standards Automation and Control Networks ANSI/ASHRAE 147e-2018, Reducing the Release Attn: Jim Heldenbrand ASHRAE Approved: 6/25/2009 of Halogenated Refrigerants from 1791 Tullie Circle, N.E. Manager of Standards Refrigerating and Air-Conditioning Equipment Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE and Systems 1791 Tullie Circle, N.E. Approved: 3/27/2018 ANSI/ASHRAE 15d-2018, Safety Standard for Refrigeration Systems Atlanta Ge 30329-5478 Manager of Standards Approved: 10/23/2018 Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE 140c-2011, Standard Method of 1791 Tullie Circle, N.E. Manager of Standards Test for the Evaluation of Building Energy Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Analysis Computer Programs 1791 Tullie Circle, N.E. Approved: 11/2/2011 ANSI/ASHRAE 158.2-2018, Methods of Testing Atlanta Ge 30329-5478 Manager of Standards Capacity of Refrigerant Pressure Regulators ANSI/ASHRAE 15f-2009, Safety Standard for Attn: Jim Heldenbrand ASHRAE Approved: 8/1/2018 Refrigeration Systems 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Approved: 6/25/2009 1791 Tullie Circle, N.E. Manager of Standards ANSI/ASHRAE 145.2d-2016, Laboratory Test Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Methods for Assessing the Performance of 1791 Tullie Circle, N.E. Gas-Phase Air Cleaning Systems: Air Cleaning ANSI/ASHRAE 15a-2007, Safety Standard for Atlanta Ge 30329-5478 Devices Refrigeration Systems Approved: 7/1/2016 Approved: 7/25/2007 ANSI/ASHRAE 15g-2009, Safety Standard for Refrigeration Systems Manager of Standards Manager of Standards Approved: 1/29/2009 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. ANSI/ASHRAE 147a-2018, Reducing the Release ANSI/ASHRAE 15b-2016, Safety Standard for Atlanta Ge 30329-5478 of Halogenated Refrigerants from Refrigeration Systems Refrigerating and Air-Conditioning Equipment Approved: 6/30/2016 ANSI/ASHRAE 15h-2009, Safety Standard for Refrigeration Systems and Systems Manager of Standards Approved: 6/25/2009 Approved: 3/27/2018 Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. Manager of Standards Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE 15b-2017, Safety Standard for Atlanta Ge 30329-5478 Refrigeration Systems ANSI/ASHRAE 147b-2018, Reducing the Release Approved: 6/29/2017 ANSI/ASHRAE 15i -2009, Safety Standard for Refrigeration Systems of Halogenated Refrigerants from Manager of Standards Refrigerating and Air-Conditioning Equipment Attn: Jim Heldenbrand ASHRAE Approved: 7/22/2009 and Systems 1791 Tullie Circle, N.E. Manager of Standards Approved: 3/27/2018 Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 49 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE 160a-2011, Criteria for Moisture ANSI/ASHRAE 170e-2011, Ventilation of Health ANSI/ASHRAE 188f-2018, Legionellosis: Risk Design Analysis in Buildings Care Facilities Management for Building Water Systems Approved: 2/3/2011 Approved: 2/3/2011 Approved: 1/25/2018 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE 161a-2009, Air Quality within ANSI/ASHRAE 170f-2011, Ventilation of Health ANSI/ASHRAE 188h-2018, Legionellosis: Risk Commercial Aircraft Care Facilities Management for Building Water Systems Approved: 6/25/2009 Approved: 2/3/2011 Approved: 6/28/2018 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE 161b-2009, Air Quality within ANSI/ASHRAE 170h-2011, Ventilation of Health ANSI/ASHRAE 20-2019, Method of Testfor Commercial Aircraft Care Facilities Rating Remote Mechanical-Draft Air-Cooled Approved: 6/25/2009 Approved: 7/27/2011 Refrigerant Condensers Manager of Standards Manager of Standards Approved: 1/4/2019 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE 161d-2019, Air Quality within ANSI/ASHRAE 184a-2018, Method of Test for Commercial Aircraft Field Performance of Liquid-Chilling Systems ANSI/ASHRAE 222-2018, Standard Method of Approved: 6/27/2019 Approved: 12/7/2018 Test for Electrical Power Drive Systems Manager of Standards Manager of Standards Approved: 8/1/2018 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE 161e-2019, Air Quality within ANSI/ASHRAE 188a-2017, Legionellosis: Risk Commercial Aircraft Management for Building Water Systems ANSI/ASHRAE 34a-2007, Designation and Safety Approved: 6/27/2019 Approved: 6/29/2017 Classification of Refrigerants Manager of Standards Manager of Standards Approved: 6/28/2007 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE 169a-2006, Weather Data for ANSI/ASHRAE 188b-2017, Legionellosis: Risk Building Design Standards Management for Building Water Systems ANSI/ASHRAE 34a-2017, Designation and Safety Approved: 6/30/2006 Approved: 6/29/2017 Classification of Refrigerants Manager of Standards Manager of Standards Approved: 6/29/2017 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE 169b-2013, Climatic Data for ANSI/ASHRAE 188c-2017, Legionellosis: Risk Building Design Standards Management for Building Water Systems ANSI/ASHRAE 34aa-2012, Designation and Approved: 11/13/2013 Approved: 6/29/2017 Safety Classification of Refrigerants Manager of Standards Manager of Standards Approved: 6/28/2012 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE 170a-2009, Ventilation of Health ANSI/ASHRAE 188e-2017, Legionellosis: Risk Care Facilities Management for Building Water Systems ANSI/ASHRAE 34ab-2012, Designation and Approved: 6/25/2009 Approved: 6/29/2017 Safety Classification of Refrigerants Manager of Standards Manager of Standards Approved: 6/28/2012 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 50 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE 34ab-2016, Designation and ANSI/ASHRAE 34ai-2016, ANSI/ASHRAE ANSI/ASHRAE 34e-2017, Designation and Safety Safety Classification of Refrigerants Standard 34-2013, Designation and Safety Classification of Refrigerants Approved: 8/30/2016 Classification of Refrigerants Approved: 6/29/2017 Manager of Standards Approved: 6/30/2016 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE 34ac-2016, Designation and ANSI/ASHRAE 34f-2007, Designation and Safety Safety Classification of Refrigerants ANSI/ASHRAE 34b-2007, Designation and Safety Classification of Refrigerants Approved: 8/30/2016 Classification of Refrigerants Approved: 6/28/2007 Manager of Standards Approved: 6/28/2007 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE 34ad-2016, ANSI/ASHRAE ANSI/ASHRAE 34g-2007, Designation and Safety Standard 34-2013, Designation and Safety ANSI/ASHRAE 34b-2017, Designation and Safety Classification of Refrigerants Classification of Refrigerants Classification of Refrigerants Approved: 6/28/2007 Approved: 6/30/2016 Approved: 6/29/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE 34h-2007, Designation and Safety ANSI/ASHRAE 34af-2009, Designation and ANSI/ASHRAE 34c-2007, Designation and Safety Classification of Refrigerants Safety Classification of Refrigerants Classification of Refrigerants Approved: 6/28/2007 Approved: 6/25/2009 Approved: 6/28/2007 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE 34h-2018, Designation and Safety ANSI/ASHRAE 34af-2016, ANSI/ASHRAE ANSI/ASHRAE 34C-2017, Designation and Safety Classification of Refrigerants Standard 34-2013, Designation and Safety Classification of Refrigerants Approved: 1/25/2018 Classification of Refrigerants Approved: 10/10/2017 Manager of Standards Approved: 6/30/2016 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE 34i-2011, Designation and Safety ANSI/ASHRAE 34d-2007, Designation and Safety Classification of Refrigerants ANSI/ASHRAE 34ag-2009, Designation and Classification of Refrigerants Approved: 6/30/2011 Safety Classification of Refrigerants Approved: 3/3/2007 Manager of Standards Approved: 6/25/2009 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE 34j-2011, Designation and Safety ANSI/ASHRAE 34d-2017, Designation and Safety Classification of Refrigerants ANSI/ASHRAE 34ag-2016, ANSI/ASHRAE Classification of Refrigerants Approved: 6/30/2011 Standard 34-2013, Designation and Safety Approved: 6/29/2017 Manager of Standards Classification of Refrigerants Manager of Standards Attn: Jim Heldenbrand ASHRAE Approved: 6/30/2016 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Manager of Standards 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. ANSI/ASHRAE 34j-2018, Designation and Safety Atlanta Ge 30329-5478 ANSI/ASHRAE 34e-2007, Designation and Safety Classification of Refrigerants Classification of Refrigerants Approved: 1/25/2018 ANSI/ASHRAE 34ah-2016, ANSI/ASHRAE Approved: 6/28/2007 Manager of Standards Standard 34-2013, Designation and Safety Manager of Standards Attn: Jim Heldenbrand ASHRAE Classification of Refrigerants Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Approved: 6/30/2016 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 51 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE 34k-2011, Designation and Safety ANSI/ASHRAE 34o-2011, Designation and Safety ANSI/ASHRAE 34s-2007, Designation and Safety Classification of Refrigerants Classification of Refrigerants Classification of Refrigerants Approved: 6/30/2011 Approved: 6/30/2011 Approved: 6/26/2008 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE 34k-2018, Designation and Safety ANSI/ASHRAE 34o-2015, Designation and Safety ANSI/ASHRAE 34s-2015, Designation and Safety Classification of Refrigerants Classification of Refrigerants Classification of Refrigerants Approved: 1/25/2018 Approved: 11/2/2015 Approved: 11/2/2015 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE 34l-2011, Designation and Safety ANSI/ASHRAE 34p-2007, Designation and Safety ANSI/ASHRAE 34t-2007, Designation and Safety Classification of Refrigerants Classification of Refrigerants Classification of Refrigerants Approved: 6/30/2011 Approved: 6/26/2008 Approved: 3/3/2007 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE 34L-2018, Designation and Safety ANSI/ASHRAE 34p-2015, Designation and Safety ANSI/ASHRAE 34t-2015, Designation and Safety Classification of Refrigerants Classification of Refrigerants Classification of Refrigerants Approved: 1/25/2018 Approved: 11/2/2015 Approved: 11/2/2015 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE 34m-2007, Designation and ANSI/ASHRAE 34q-2007, Designation and Safety ANSI/ASHRAE 34u-2007, Designation and Safety Safety Classification of Refrigerants Classification of Refrigerants Classification of Refrigerants Approved: 3/3/2007 Approved: 6/26/2008 Approved: 6/26/2008 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE 34m-2018, Designation and ANSI/ASHRAE 34q-2015, Designation and Safety ANSI/ASHRAE 34u-2016, Designation and Safety Safety Classification of Refrigerants Classification of Refrigerants Classification of Refrigerants Approved: 1/25/2018 Approved: 11/2/2015 Approved: 1/28/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE 34n-2011, Designation and Safety ANSI/ASHRAE 34r-2007, Designation and Safety ANSI/ASHRAE 34v-2007, Designation and Safety Classification of Refrigerants Classification of Refrigerants Classification of Refrigerants Approved: 6/30/2011 Approved: 6/26/2008 Approved: 3/27/2007 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE 34n-2018, Designation and Safety ANSI/ASHRAE 34r-2015, Designation and Safety ANSI/ASHRAE 34v-2016, Designation and Safety Classification of Refrigerants Classification of Refrigerants Classification of Refrigerants Approved: 1/25/2018 Approved: 11/2/2015 Approved: 1/28/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 52 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE 34w-2009, Designation and ANSI/ASHRAE 52.2e-2016, Method of Testing ANSI/ASHRAE 62.1b-2007, Ventilation for Safety Classification of Refrigerants General Ventilation Air Cleaning Devices for Acceptable Indoor Air Quality Approved: 11/18/2009 Removal Efficiency by Particle Size Approved: 6/28/2007 Manager of Standards Approved: 3/1/2016 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE 34x-2016, Designation and Safety ANSI/ASHRAE 62.1c-2009, Ventilation for Classification of Refrigerants ANSI/ASHRAE 52.2f-2016, Method of Testing Acceptable Indoor Air Quality Approved: 1/28/2016 General Ventilation Air Cleaning Devices for Approved: 7/22/2009 Manager of Standards Removal Efficiency by Particle Size Manager of Standards Attn: Jim Heldenbrand ASHRAE Approved: 3/1/2016 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Manager of Standards 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. ANSI/ASHRAE 34y-2016, Designation and Safety Atlanta Ge 30329-5478 ANSI/ASHRAE 62.1c-2015, Ventilation for Classification of Refrigerants Acceptable Indoor Air Quality Approved: 6/30/2016 ANSI/ASHRAE 52.2g-2016, Method of Testing Approved: 1/29/2015 Manager of Standards General Ventilation Air Cleaning Devices for Manager of Standards Attn: Jim Heldenbrand ASHRAE Removal Efficiency by Particle Size Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Approved: 12/30/2016 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE 34z-2012, Designation and Safety 1791 Tullie Circle, N.E. ANSI/ASHRAE 62.1d-2009, Ventilation for Classification of Refrigerants Atlanta Ge 30329-5478 Acceptable Indoor Air Quality Approved: 6/28/2012 Approved: 7/22/2009 Manager of Standards ANSI/ASHRAE 52.2i-2016, Method of Testing Manager of Standards Attn: Jim Heldenbrand ASHRAE General Ventilation Air Cleaning Devices for Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Removal Efficiency by Particle Size 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Approved: 12/30/2016 Atlanta Ge 30329-5478 Manager of Standards ANSI/ASHRAE 34z-2016, Designation and Safety ANSI/ASHRAE 62.1e-2018, Ventilation for Attn: Jim Heldenbrand ASHRAE Classification of Refrigerants 1791 Tullie Circle, N.E. Acceptable Indoor Air Quality Approved: 6/30/2016 Atlanta Ge 30329-5478 Approved: 1/25/2018 Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE 55a-2011, Thermal Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Environmental Conditions for Human 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Occupancy Atlanta Ge 30329-5478 Approved: 6/30/2011 ANSI/ASHRAE 52.2a-2006, Method of Testing ANSI/ASHRAE 62.1f-2018, Ventilation for Manager of Standards General Ventilation Air-Cleaning Devices for Acceptable Indoor Air Quality Attn: Jim Heldenbrand ASHRAE Removal Efficiency by Particle Size 1791 Tullie Circle, N.E. Approved: 6/28/2018 Approved: 1/27/2006 Atlanta Ge 30329-5478 Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE 55e-2012, Thermal 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Environmental Conditions for Human Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Occupancy Approved: 6/28/2012 ANSI/ASHRAE 62.1g-2006, Ventilation for ANSI/ASHRAE 52.2a-2014, Method of Testing Acceptable Indoor Air Quality, Addenda g Manager of Standards General Ventilation Air Cleaning Devices for Approved: 1/20/2006 Attn: Jim Heldenbrand ASHRAE Removal Efficiency by Particle Size 1791 Tullie Circle, N.E. Manager of Standards Approved: 12/31/2014 Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE 55g-2016, Thermal Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Environmental Conditions for Human Atlanta Ge 30329-5478 Occupancy ANSI/ASHRAE 62.1g-2018, Ventilation for Approved: 10/1/2016 Acceptable Indoor Air Quality ANSI/ASHRAE 52.2b-2008, Method of Testing Approved: 6/28/2018 Manager of Standards General Ventilation Air-Cleaning Devices for Attn: Jim Heldenbrand ASHRAE Manager of Standards Removal by Particle Size 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Approved: 7/24/2008 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 53 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE 62.1h-2018, Ventilation for ANSI/ASHRAE 62.1o-2009, Ventilation for ANSI/ASHRAE 62.1w-2018, Ventilation for Acceptable Indoor Air Quality Acceptable Indoor Air Quality Acceptable Indoor Air Quality Approved: 6/28/2018 Approved: 6/25/2009 Approved: 6/28/2018 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE 62.1i -2009, Ventilation for ANSI/ASHRAe 62.1o-2018, Ventilation for ANSI/ASHRAE 62.1z-2018, Ventilation for Acceptable Indoor Air Quality Acceptable Indoor Air Quality Acceptable Indoor Air Quality Approved: 7/22/2009 Approved: 7/25/2018 Approved: 6/28/2018 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE 62.1j-2018, Ventilation for ANSI/ASHRAE 62.1p-2009, Ventilation for ANSI/ASHRAE 62.2a-2008, Ventilation and Acceptable Indoor Air Quality Acceptable Indoor Air Quality Acceptable Indoor Air Quality in Low-Rise Approved: 6/28/2018 Approved: 7/22/2009 Residential Buildings Manager of Standards Manager of Standards Approved: 6/26/2008 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE 62.1l-2009, Ventilation for ANSI/ASHRAE 62.1q-2015, Ventilation for Acceptable Indoor Air Quality Acceptable Indoor Air Quality ANSI/ASHRAE 62.2e-2007, Ventilation and Approved: 6/25/2009 Approved: 1/29/2015 Acceptable Indoor Air Quality in Low-Rise Manager of Standards Manager of Standards Residential Buildings Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Approved: 3/3/2007 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. ANSI/ASHRAE 62.1l-2012, Ventilation for ANSI/ASHRAE 62.1q-2018, Ventilation for Atlanta Ge 30329-5478 Acceptable Indoor Air Quality Acceptable Indoor Air Quality Approved: 6/28/2012 Approved: 7/25/2018 ANSI/ASHRAE 62.2e-2018, Ventilation and Manager of Standards Manager of Standards Acceptable Indoor Air Quality in Residential Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Buildings 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Approved: 7/25/2018 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Manager of Standards Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE 62.1m-2009, Ventilation for ANSI/ASHRAE 62.1s-2009, Ventilation for 1791 Tullie Circle, N.E. Acceptable Indoor Air Quality Acceptable Indoor Air Quality Atlanta Ge 30329-5478 Approved: 6/25/2009 Approved: 6/25/2009 Manager of Standards Manager of Standards ANSI/ASHRAE 62.2f-2009, Ventilation and Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Acceptable Indoor Air Quality in Low-Rise 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Residential Buildings Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Approved: 6/25/2009 Manager of Standards ANSI/ASHRAE 62.1m-2019, Ventilation for ANSI/ASHRAE 62.1u-2018, Ventilation for Attn: Jim Heldenbrand ASHRAE Acceptable Indoor Air Quality Acceptable Indoor Air Quality 1791 Tullie Circle, N.E. Approved: 2/13/2019 Approved: 7/25/2018 Atlanta Ge 30329-5478 Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE 62.2g-2006, Ventilation and 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Acceptable Indoor Air Quality in Low-Rise Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Residential Buildings Approved: 4/10/2006 ANSI/ASHRAE 62.1n-2009, Ventilation for ANSI/ASHRAE 62.1v-2018, Ventilation for Manager of Standards Acceptable Indoor Air Quality Acceptable Indoor Air Quality Attn: Jim Heldenbrand ASHRAE Approved: 6/25/2009 Approved: 7/25/2018 1791 Tullie Circle, N.E. Manager of Standards Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 54 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE 62.2g-2018, Ventilation and ANSI/ASHRAE 62.2q-2016, Ventilation and ANSI/ASHRAE 62h-2003, Ventilation for Acceptable Indoor Air Quality in Residential Acceptable Indoor Air Quality in Low-Rise Acceptable Indoor Air Quality, Addenda h Buildings Residential Buildings Approved: 11/26/2003 Approved: 1/25/2018 Approved: 6/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE 62i-2002, Ventilation for ANSI/ASHRAE 62.2h-2007, Ventilation and ANSI/ASHRAE 62.2r-2012, Ventilation and Acceptable Indoor Air Quality (Addenda i) Acceptable Indoor Air Quality in Low-Rise Acceptable Indoor Air Quality in Low-Rise Approved: 3/25/2002 Residential Buildings Residential Buildings Manager of Standards Approved: 3/27/2007 Approved: 7/26/2012 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE 62j-2001, Ventilation for Acceptable Indoor Air Quality, Addenda j ANSI/ASHRAE 62.2i-2009, Ventilation and ANSI/ASHRAE 62.2U-2019, Ventilation and Approved: 11/27/2001 Acceptable Indoor Air Quality in Low-Rise Acceptable Indoor Air Quality in Residential Manager of Standards Residential Buildings Buildings Attn: Jim Heldenbrand ASHRAE Approved: 6/25/2009 Approved: 2/13/2019 1791 Tullie Circle, N.E. Manager of Standards Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. ANSI/ASHRAE 62k-2002, Ventilation for Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Acceptable Indoor Air Quality, Addenda k Approved: 9/30/2002 ANSI/ASHRAE 62.2i-2018, Ventilation and ANSI/ASHRAE 62.2v-2016, Ventilation and Manager of Standards Acceptable Indoor Air Quality in Residential Acceptable Indoor Air Quality in Low-Rise Attn: Jim Heldenbrand ASHRAE Buildings Residential Buildings 1791 Tullie Circle, N.E. Approved: 1/25/2018 Approved: 2/24/2016 Atlanta Ge 30329-5478 Manager of Standards Manager of Standards ANSI/ASHRAE 62m-2001, Ventilation for Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Acceptable Indoor Air Quality, Addenda m Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Approved: 11/27/2001 Manager of Standards ANSI/ASHRAE 62.2k-2007, Ventilation and ANSI/ASHRAE 62aa-2004, Ventilation for Attn: Jim Heldenbrand ASHRAE Acceptable Indoor Air Quality in Low-Rise Acceptable Indoor Air Quality 1791 Tullie Circle, N.E. Residential Buildings Approved: 8/5/2004 Atlanta Ge 30329-5478 Approved: 7/25/2007 Manager of Standards ANSI/ASHRAE 62n-2004, Ventilation and Manager of Standards Attn: Jim Heldenbrand ASHRAE Acceptable Indoor Air Quality in Commercial, Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Institutional, and High-Rise Residential Atlanta Ge 30329-5478 Buildings, Addenda n ANSI/ASHRAE 62ae-2003, Ventilation and Approved: 1/8/2004 ANSI/ASHRAE 62.2o-2012, Ventilation and Acceptable Indoor Air Quality Manager of Standards Acceptable Indoor Air Quality in Low-Rise Approved: 9/29/2003 Attn: Jim Heldenbrand ASHRAE Residential Buildings Manager of Standards 1791 Tullie Circle, N.E. Approved: 7/26/2012 Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Manager of Standards 1791 Tullie Circle, N.E. ANSI/ASHRAE 62o-2003, Ventilation for Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Acceptable Indoor Air Quality Atlanta Ge 30329-5478 ANSI/ASHRAE 62af-2003, Ventilation and Approved: 4/2/2003 Acceptable Indoor Air Quality in Commercial, Manager of Standards ANSI/ASHRAE 62.2p-2019, Ventilation and Institutional, and High-Rise Residential Attn: Jim Heldenbrand ASHRAE Acceptable Indoor Air Quality in Residential Buildings, Addenda af 1791 Tullie Circle, N.E. Buildings Approved: 5/27/2003 Atlanta Ge 30329-5478 Approved: 2/13/2019 Manager of Standards ANSI/ASHRAE 62p-2001, Ventilation for Manager of Standards Attn: Jim Heldenbrand ASHRAE Acceptable Indoor Air Quality, Addenda p Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Approved: 12/14/2001 Atlanta Ge 30329-5478 Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 55 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE 62q-2001, Ventilation for ANSI/ASHRAE 62y-2004, Ventilation for ANSI/ASHRAE Addendum 105b-2012, Standard Acceptable Indoor Air Quality, Addenda q Acceptable Indoor Air Quality Methods of Measuring and Expressing Approved: 11/27/2001 Approved: 8/5/2004 Building Energy Performance Manager of Standards Manager of Standards Approved: 1/26/2012 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE 62r-2003, Ventilation and ANSI/ASHRAE 62z-2003, Ventilation and Acceptable Indoor Air Quality in Commercial, Acceptable Indoor Air Quality in Commercial, ANSI/ASHRAE Addendum 135.1d-2010, Method Institutional, and High-Rise Residential Institutional, and High-Rise Residential of Test for Conformance to BACnet Buildings, Addenda r Buildings, Addenda z Approved: 7/1/2010 Approved: 5/27/2003 Approved: 6/4/2003 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 135.1e-2011, Method ANSI/ASHRAE 62s-2001, Ventilation for ANSI/ASHRAE 90.1n-2003, Energy Standard for of Test for Conformance to BACnet Acceptable Indoor Air Quality, (Addenda s) Buildings Except Low-Rise Residential Approved: 2/3/2011 Approved: 11/6/2001 Buildings Manager of Standards Manager of Standards Approved: 9/25/2003 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 135.1f-2011, Method ANSI/ASHRAE 62t-2002, Ventilation for of Test for Conformance to BACnet Acceptable Indoor Air Quality ANSI/ASHRAE 90.2k-2007, Energy Efficient Approved: 2/3/2011 Approved: 4/9/2002 Design of Low-Rise Residential Buildings Manager of Standards Manager of Standards Approved: 3/3/2007 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 135.1g-2011, Method ANSI/ASHRAE 62u-2002, Ventilation for of Test for Conformance to BACnet Acceptable Indoor Air Quality ANSI/ASHRAE 90.4a-2018, Energy Standard for Approved: 2/3/2011 Approved: 4/24/2002 Data Centers Manager of Standards Manager of Standards Approved: 1/25/2018 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 135.1h-2011, Method ANSI/ASHRAE 62v-2002, Ventilation for of Test for Conformance to BACnet Acceptable Indoor Air Quality, Addenda v ANSI/ASHRAE 90.4b-2018, Energy Standard for Approved: 2/3/2011 Approved: 4/12/2002 Data Centers Manager of Standards Manager of Standards Approved: 1/25/2018 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 135ab-2011, BACnet - ANSI/ASHRAE 62w-2001, Ventilation for A Data Communication Protocol for Building Acceptable Indoor Air Quality, Addenda w ANSI/ASHRAE Addedum f to Standard 90.4 Automation and Control Networks Approved: 11/27/2001 -2019, Energy Standard for Data Centers Approved: 2/3/2011 Manager of Standards Approved: 6/27/2019 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE 62x-2003, Ventilation for ANSI/ASHRAE Addendum 135ac-2011, BACnet - Acceptable Indoor Air Quality ANSI/ASHRAE Addendum 105a-2011, Standard A Data Communication Protocol for Building Approved: 11/19/2003 Methods of Measuring and Expressing Automation and Control Networks Manager of Standards Building Energy Performance Approved: 2/3/2011 Attn: Jim Heldenbrand ASHRAE Approved: 1/26/2012 Manager of Standards 1791 Tullie Circle, N.E. Manager of Standards Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 56 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Addendum 135bq-2018, BACnet - ANSI/ASHRAE Addendum 135t-2010, BACnet - ANSI/ASHRAE Addendum 140b-2010, Standard A Data Communication Protocol for Building A Data Communication Protocol for Building Method of Test for the Evaluation of Building Automation and Control Networks Automation and Control Networks Energy Analysis Computer Programs Approved: 6/14/2018 Approved: 1/28/2010 Approved: 1/28/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 135bs-2019, BACnet - ANSI/ASHRAE Addendum 135u-2010, BACnet - ANSI/ASHRAE Addendum 15a-2014, Safety A Data Communication Protocol for Building A Data Communication Protocol for Building Standard for Refrigeration Systems Automation and Control Networks Automation and Control Networks Approved: 1/23/2014 Approved: 8/26/2019 Approved: 1/28/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 15b-2012, Safety ANSI/ASHRAE Addendum 135g-2010, BACnet - ANSI/ASHRAE Addendum 135v-2009, BACnet - Standard for Refrigeration Systems A Data Communication Protocol for Building A Data Communication Protocol for Building Approved: 1/26/2012 Automation and Control Networks Automation and Control Networks Manager of Standards Approved: 7/1/2010 Approved: 6/25/2009 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 15c-2012, Safety Standard for Refrigeration Systems ANSI/ASHRAE Addendum 135h-2010, BACnet - ANSI/ASHRAE Addendum 135w-2010, BACnet - Approved: 1/26/2012 A Data Communication Protocol for Building A Data Communication Protocol for Building Manager of Standards Automation and Control Networks Automation and Control Networks Attn: Jim Heldenbrand ASHRAE Approved: 1/28/2010 Approved: 1/28/2010 1791 Tullie Circle, N.E. Manager of Standards Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. ANSI/ASHRAE Addendum 15d-2012, Safety Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Standard for Refrigeration Systems Approved: 1/26/2012 ANSI/ASHRAE Addendum 135k-2010, BACnet - ANSI/ASHRAE Addendum 135x-2010, BACnet - Manager of Standards A Data Communication Protocol for Building A Data Communication Protocol for Building Attn: Jim Heldenbrand ASHRAE Automation and Control Networks Automation and Control Networks 1791 Tullie Circle, N.E. Approved: 1/28/2010 Approved: 1/28/2010 Atlanta Ge 30329-5478 Manager of Standards Manager of Standards ANSI/ASHRAE Addendum 15e-2012, Safety Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Standard for Refrigeration Systems Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Approved: 1/26/2012 Manager of Standards ANSI/ASHRAE Addendum 135n-2010, BACnet - ANSI/ASHRAE Addendum 135y-2010, BACnet - Attn: Jim Heldenbrand ASHRAE A Data Communication Protocol for Building A Data Communication Protocol for Building 1791 Tullie Circle, N.E. Automation and Control Networks Automation and Control Networks Atlanta Ge 30329-5478 Approved: 1/28/2010 Approved: 1/28/2010 ANSI/ASHRAE Addendum 15f-2012, Safety Manager of Standards Manager of Standards Standard for Refrigeration Systems Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Approved: 1/26/2012 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Manager of Standards Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Addendum 135p-2010, BACnet - ANSI/ASHRAE Addendum 135z-2010, BACnet - 1791 Tullie Circle, N.E. A Data Communication Protocol for Building A Data Communication Protocol for Building Atlanta Ge 30329-5478 Automation and Control Networks Automation and Control Networks Approved: 7/1/2010 Approved: 7/1/2010 ANSI/ASHRAE Addendum 161b-2017, Air Quality within Commercial Aircraft Manager of Standards Manager of Standards Approved: 2/2/2017 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 57 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Addendum 161c-2013, Air ANSI/ASHRAE Addendum 170k-2013, ANSI/ASHRAE Addendum 34aa-2009, Quality within Commercial Aircraft Ventilation of Health Care Facilities Designation and Safety Classification of Approved: 1/30/2013 Approved: 1/30/2013 Refrigerants Manager of Standards Manager of Standards Approved: 1/29/2009 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 161c-2017, Air ANSI/ASHRAE Addendum 170n-2013, Quality within Commercial Aircraft Ventilation of Health Care Facilities ANSI/ASHRAE Addendum 34ab-2009, Approved: 2/2/2017 Approved: 1/30/2013 Designation and Safety Classification of Manager of Standards Manager of Standards Refrigerants Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Approved: 1/29/2009 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. ANSI/ASHRAE Addendum 161d-2013, Air ANSI/ASHRAE Addendum 170q-2012, Atlanta Ge 30329-5478 Quality within Commercial Aircraft Ventilation of Health Care Facilities Approved: 1/30/2013 Approved: 10/27/2012 ANSI/ASHRAE Addendum 34ac-2013, Manager of Standards Manager of Standards Designation and Safety Classification of Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Refrigerants 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Approved: 1/30/2013 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Manager of Standards Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Addendum 161d-2017, Air ANSI/ASHRAE Addendum 170s-2012, 1791 Tullie Circle, N.E. Quality within Commercial Aircraft Ventilation of Health Care Facilities Atlanta Ge 30329-5478 Approved: 6/29/2017 Approved: 6/28/2012 Manager of Standards Manager of Standards ANSI/ASHRAE Addendum 34ad -2009, Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Designation and Safety Classification of 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Refrigerants Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Approved: 1/29/2009 Manager of Standards ANSI/ASHRAE Addendum 161d-2017a, Air ANSI/ASHRAE Addendum 170t-2012, Attn: Jim Heldenbrand ASHRAE Quality within Commercial Aircraft Ventilation of Health Care Facilities 1791 Tullie Circle, N.E. Approved: 6/29/2017 Approved: 10/27/2012 Atlanta Ge 30329-5478 Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Addendum 34ad-2013, 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Designation and Safety Classification of Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Refrigerants Approved: 1/30/2013 ANSI/ASHRAE Addendum 161f-2013, Air Quality ANSI/ASHRAE Addendum 170v-2013, Manager of Standards within Commercial Aircraft Ventilation of Health Care Facilities Attn: Jim Heldenbrand ASHRAE Approved: 1/30/2013 Approved: 1/30/2013 1791 Tullie Circle, N.E. Manager of Standards Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. ANSI/ASHRAE Addendum 34ae-2009, Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Designation and Safety Classification of Refrigerants ANSI/ASHRAE Addendum 161g-2013, Air ANSI/ASHRAE Addendum 34a-2010, Approved: 1/29/2009 Quality within Commercial Aircraft Designation and Safety Classification of Manager of Standards Approved: 6/27/2013 Refrigerants Attn: Jim Heldenbrand ASHRAE Manager of Standards Approved: 7/1/2010 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Manager of Standards Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. ANSI/ASHRAE Addendum 34ae-2013, Atlanta Ge 30329-5478 Designation and Safety Classification of ANSI/ASHRAE Addendum 170j-2012, Refrigerants Ventilation of Health Care Facilities ANSI/ASHRAE Addendum 34a-2014, Approved: 1/30/2013 Approved: 10/27/2012 Designation and Safety Classification of Manager of Standards Refrigerants Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Approved: 1/23/2014 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 58 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Addendum 34af-2013, ANSI/ASHRAE Addendum 34aj to Standard 34 ANSI/ASHRAE Addendum 34d-2014, Designation and Safety Classification of -2013, Designation and Safety Classification Designation and Safety Classification of Refrigerants of Refrigerants Refrigerants Approved: 1/30/2013 Approved: 6/27/2013 Approved: 7/3/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 34ag to Standard 34 ANSI/ASHRAE Addendum 34ak-2010, ANSI/ASHRAE Addendum 34e-2011, -2013, Designation and Safety Classification Designation and Safety Classification of Designation and Safety Classification of of Refrigerants Refrigerants Refrigerants Approved: 6/27/2013 Approved: 2/24/2010 Approved: 2/3/2011 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 34ah-2010, ANSI/ASHRAE Addendum 34b-2010, ANSI/ASHRAE Addendum 34e-2014, Designation and Safety Classification of Designation and Safety Classification of Designation and Safety Classification of Refrigerants Refrigerants Refrigerants Approved: 1/28/2010 Approved: 7/1/2010 Approved: 7/3/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 34ah to Standard 34 ANSI/ASHRAE Addendum 34b-2014, ANSI/ASHRAE Addendum 34f-2011, Designation -2013, Designation and Safety Classification Designation and Safety Classification of and Safety Classification of Refrigerants of Refrigerants Refrigerants Approved: 2/3/2011 Approved: 6/27/2013 Approved: 1/23/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 34f-2014, Designation ANSI/ASHRAE Addendum 34ai-2010, ANSI/ASHRAE Addendum 34c-2011, and Safety Classification of Refrigerants Designation and Safety Classification of Designation and Safety Classification of Approved: 7/3/2014 Refrigerants Refrigerants Manager of Standards Approved: 1/28/2010 Approved: 7/27/2011 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 34g-2011, Designation and Safety Classification of ANSI/ASHRAE Addendum 34ai to Standard 34 ANSI/ASHRAE Addendum 34c-2014, Refrigerants -2013, Designation and Safety Classification Designation and Safety Classification of Approved: 2/3/2011 of Refrigerants Refrigerants Manager of Standards Approved: 6/27/2013 Approved: 1/23/2014 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 34g-2014, Designation and Safety Classification of ANSI/ASHRAE Addendum 34aj-2010, ANSI/ASHRAE Addendum 34d-2010, Refrigerants Designation and Safety Classification of Designation and Safety Classification of Approved: 7/3/2014 Refrigerants Refrigerants Manager of Standards Approved: 1/28/2010 Approved: 7/1/2010 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 59 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Addendum 34h-2011, ANSI/ASHRAE Addendum 34n-2015, ANSI/ASHRAE Addendum 34u-2012, Designation and Safety Classification of Designation and Safety Classification of Designation and Safety Classification of Refrigerants Refrigerants Refrigerants Approved: 2/3/2011 Approved: 1/29/2015 Approved: 1/26/2012 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 34h-2014, ANSI/ASHRAE Addendum 34p-2012, ANSI/ASHRAE Addendum 34v-2012, Designation and Safety Classification of Designation and Safety Classification of Designation and Safety Classification of Refrigerants Refrigerants Refrigerants Approved: 7/3/2014 Approved: 1/26/2012 Approved: 1/26/2012 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 34i-2014, Designation ANSI/ASHRAE Addendum 34q-2012, ANSI/ASHRAE Addendum 34w-2013, and Safety Classification of Refrigerants Designation and Safety Classification of Designation and Safety Classification of Approved: 7/3/2014 Refrigerants Refrigerants Manager of Standards Approved: 1/26/2012 Approved: 6/27/2013 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 34j-2015, Designation and Safety Classification of Refrigerants ANSI/ASHRAE Addendum 34r-2012, Designation ANSI/ASHRAE Addendum 34x-2009, Approved: 1/29/2015 and Safety Classification of Refrigerants Designation and Safety Classification of Manager of Standards Approved: 1/26/2012 Refrigerants Attn: Jim Heldenbrand ASHRAE Manager of Standards Approved: 1/29/2009 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Manager of Standards Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. ANSI/ASHRAE Addendum 34k-2015, Atlanta Ge 30329-5478 Designation and Safety Classification of ANSI/ASHRAE Addendum 34s-2012, Refrigerants Designation and Safety Classification of ANSI/ASHRAE Addendum 34x-2013, Approved: 1/29/2015 Refrigerants Designation and Safety Classification of Manager of Standards Approved: 1/26/2012 Refrigerants Attn: Jim Heldenbrand ASHRAE Manager of Standards Approved: 6/27/2013 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Manager of Standards Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. ANSI/ASHRAE Addendum 34l-2015, Designation Atlanta Ge 30329-5478 and Safety Classification of Refrigerants ANSI/ASHRAE Addendum 34t-2012, Designation Approved: 1/29/2015 and Safety Classification of Refrigerants ANSI/ASHRAE Addendum 34y-2009, Manager of Standards Approved: 1/26/2012 Designation and Safety Classification of Attn: Jim Heldenbrand ASHRAE Manager of Standards Refrigerants 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Approved: 1/29/2009 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Addendum 34m-2015, 1791 Tullie Circle, N.E. Designation and Safety Classification of ANSI/ASHRAE Addendum 34t-2019, Designation Atlanta Ge 30329-5478 Refrigerants and Safety Classification of Refrigerants Approved: 1/29/2015 Approved: 7/24/2019 ANSI/ASHRAE Addendum 34y-2012, Manager of Standards Manager of Standards Designation and Safety Classification of Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Refrigerants 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Approved: 1/26/2012 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 60 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Addendum 34z-2010, ANSI/ASHRAE Addendum 55c-2017, Thermal ANSI/ASHRAE Addendum 55h-2010, Thermal Designation and Safety Classification of Environmental Conditions for Human Environmental Conditions for Human Refrigerants Occupancy Occupancy Approved: 1/28/2010 Approved: 5/1/2017 Approved: 7/1/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 55a-2014, Thermal ANSI/ASHRAE Addendum 55d-2012, Thermal ANSI/ASHRAE Addendum 55h-2013, Thermal Environmental Conditions For Human Environmental Conditions for Human Environmental Conditions for Human Occupancy Occupancy Occupancy Approved: 7/31/2014 Approved: 1/26/2012 Approved: 1/30/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 55a-2017, Thermal ANSI/ASHRAE Addendum 55d-2015, Thermal ANSI/ASHRAE Addendum 55i-2010, Thermal Environmental Conditions for Human Environmental Conditions for Human Environmental Conditions for Human Occupancy Occupancy Occupancy Approved: 11/1/2017 Approved: 6/1/2015 Approved: 7/1/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 55b-2012, Thermal ANSI/ASHRAE Addendum 55e-2015, Thermal ANSI/ASHRAE Addendum 55i-2013, Thermal Environmental Conditions for Human Environmental Conditions for Human Environmental Conditions for Human Occupancy Occupancy Occupancy Approved: 1/26/2012 Approved: 6/1/2015 Approved: 6/27/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 55b-2014, Thermal ANSI/ASHRAE Addendum 55f-2012, Thermal ANSI/ASHRAE Addendum 55j-2010, Thermal Environmental Conditions for Human Environmental Conditions for Human Environmental Conditions for Human Occupancy Occupancy Occupancy Approved: 12/1/2014 Approved: 11/22/2012 Approved: 7/23/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 55b-2019, Thermal ANSI/ASHRAE Addendum 55f-2015, Thermal ANSI/ASHRAE Addendum 55j-2013, Thermal Environmental Conditions for Human Environmental Conditions for Human Environmental Conditions for Human Occupancy Occupancy Occupancy Approved: 5/31/2019 Approved: 10/1/2015 Approved: 4/16/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 55c-2012, Thermal ANSI/ASHRAE Addendum 55g-2013, Thermal ANSI/ASHRAE Addendum 55k-2010, Thermal Environmental Conditions for Human Environmental Conditions for Human Environmental Conditions for Human Occupancy Occupancy Occupancy Approved: 1/26/2012 Approved: 2/27/2013 Approved: 7/1/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 61 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Addendum 55k-2013, Thermal ANSI/ASHRAE Addendum 62.1ad-2019, ANSI/ASHRAE Addendum 62.1an-2019, Environmental Conditions for Human Ventilation for Acceptable Indoor Air Quality Ventilation for Acceptable Indoor Air Quality Occupancy Approved: 8/26/2019 Approved: 8/26/2019 Approved: 6/27/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 62.1ae-2019, ANSI/ASHRAE Addendum 62.1ap-2019, ANSI/ASHRAE Addendum 55l-2013, Thermal Ventilation for Acceptable Indoor Air Quality Ventilation for Acceptable Indoor Air Quality Environmental Conditions for Human Approved: 8/26/2019 Approved: 6/27/2019 Occupancy Manager of Standards Manager of Standards Approved: 6/27/2013 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 62.1af-2019, ANSI/ASHRAE Addendum 62.1aq-2019, Ventilation for Acceptable Indoor Air Quality Ventilation for Acceptable Indoor Air Quality ANSI/ASHRAE Addendum 55m-2013, Thermal Approved: 8/26/2019 Approved: 7/24/2019 Environmental Conditions for Human Manager of Standards Manager of Standards Occupancy Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Approved: 6/27/2013 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. ANSI/ASHRAE Addendum 62.1ah-2019, ANSI/ASHRAE Addendum 62.1ar-2019, Atlanta Ge 30329-5478 Ventilation for Acceptable Indoor Air Quality Ventilation for Acceptable Indoor Air Quality Approved: 6/27/2019 Approved: 6/27/2019 ANSI/ASHRAE Addendum 55n-2013, Thermal Manager of Standards Manager of Standards Environmental Conditions for Human Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Occupancy 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Approved: 6/27/2013 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Manager of Standards ANSI/ASHRAE Addendum 62.1ai-2019, ANSI/ASHRAE Addendum 62.1as-2019, Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Ventilation for Acceptable Indoor Air Quality Ventilation for Acceptable Indoor Air Quality Atlanta Ge 30329-5478 Approved: 6/27/2019 Approved: 8/26/2019 Manager of Standards Manager of Standards ANSI/ASHRAE Addendum 55r-2013, Thermal Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Environmental Conditions for Human 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Occupancy Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Approved: 6/27/2013 ANSI/ASHRAE Addendum 62.1aj-2019, ANSI/ASHRAE Addendum 62.1b-2018, Manager of Standards Ventilation for Acceptable Indoor Air Quality Ventilation for Acceptable Indoor Air Quality Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Approved: 7/24/2019 Approved: 10/1/2018 Atlanta Ge 30329-5478 Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Addendum 62.1a-2010, 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Ventilation for Acceptable Indoor Air Quality Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Approved: 7/1/2010 ANSI/ASHRAE Addendum 62.1al-2019, ANSI/ASHRAE Addendum 62.1b to Standard Manager of Standards Ventilation for Acceptable Indoor Air Quality 62.1-2010, Ventilation for Acceptable Indoor Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Approved: 8/26/2019 Air Quality Atlanta Ge 30329-5478 Manager of Standards Approved: 6/27/2013 Attn: Jim Heldenbrand ASHRAE Manager of Standards ANSI/ASHRAE Addendum 62.1a-2014, 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Ventilation for Acceptable Indoor Air Quality Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Approved: 10/29/2014 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 62.1am-2019, Manager of Standards Ventilation for Acceptable Indoor Air Quality ANSI/ASHRAE Addendum 62.1c-2011, Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Approved: 6/27/2019 Ventilation for Acceptable Indoor Air Quality Atlanta Ge 30329-5478 Manager of Standards Approved: 2/3/2011 Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 62 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Addendum 62.1d-2011, ANSI/ASHRAE Addendum 62.1h-2012, ANSI/ASHRAE Addendum 62.1k-2018, Ventilation for Acceptable Indoor Air Quality Ventilation for Acceptable Indoor Air Quality Ventilation for Acceptable Indoor Air Quality Approved: 6/30/2011 Approved: 6/28/2012 Approved: 10/1/2018 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 62.1d-2015, ANSI/ASHRAE Addendum 62.1h-2016, ANSI/ASHRAE Addendum 62.1L-2019, Ventilation for Acceptable Indoor Air Quality Ventilation for Acceptable Indoor Air Quality Ventilation for Acceptable Indoor Air Quality Approved: 7/2/2015 Approved: 2/24/2016 Approved: 8/26/2019 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 62.1d-2018, ANSI/ASHRAE Addendum 62.1i-2016, ANSI/ASHRAE Addendum 62.1m to Standard Ventilation for Acceptable Indoor Air Quality Ventilation for Acceptable Indoor Air Quality 62.1-2010, Ventilation for Acceptable Indoor Approved: 2/21/2018 Approved: 2/24/2016 Air Quality Manager of Standards Manager of Standards Approved: 6/27/2013 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 62.1e-2011, ANSI/ASHRAE Addendum 62.1i-2019, Ventilation for Acceptable Indoor Air Quality Ventilation for Acceptable Indoor Air Quality ANSI/ASHRAE Addendum 62.1n-2013, Approved: 6/30/2011 Approved: 7/24/2019 Ventilation for Acceptable Indoor Air Quality Manager of Standards Manager of Standards Approved: 4/16/2013 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 62.1e-2016, ANSI/ASHRAE Addendum 62.1j-2009, Ventilation for Acceptable Indoor Air Quality Ventilation for Acceptable Indoor Air Quality ANSI/ASHRAE Addendum 62.1n-2019, Approved: 2/24/2016 Approved: 1/29/2009 Ventilation for Acceptable Indoor Air Quality Manager of Standards Manager of Standards Approved: 7/24/2019 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 62.1f-2016, ANSI/ASHRAE Addendum 62.1j-2013, Ventilation for Acceptable Indoor Air Quality Ventilation for Acceptable Indoor Air Quality ANSI/ASHRAE Addendum 62.1p-2015, Approved: 1/28/2016 Approved: 12/5/2013 Ventilation for Acceptable Indoor Air Quality Manager of Standards Manager of Standards Approved: 7/2/2015 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 62.1g-2010, ANSI/ASHRAE Addendum 62.1k-2009 , Ventilation for Acceptable Indoor Air Quality Ventilation for Acceptable Indoor Air Quality ANSI/ASHRAE Addendum 62.1q-2010, Approved: 1/28/2010 Approved: 2/20/2009 Ventilation for Acceptable Indoor Air Quality Manager of Standards Manager of Standards Approved: 1/28/2010 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 62.1g-2016, ANSI/ASHRAE Addendum 62.1k-2014, Ventilation for Acceptable Indoor Air Quality Ventilation for Acceptable Indoor Air Quality ANSI/ASHRAE Addendum 62.1q-2015, Approved: 1/28/2016 Approved: 7/3/2014 Ventilation for Acceptable Indoor Air Quality Manager of Standards Manager of Standards Approved: 1/29/2015 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 63 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Addendum 62.1r-2010, ANSI/ASHRAE Addendum 62.2b-2017, ANSI/ASHRAE Addendum 62.2e-2009, Ventilation for Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality Approved: 1/28/2010 in Residential Buildings in Low-Rise Residential Buildings Manager of Standards Approved: 6/29/2017 Approved: 6/25/2009 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 62.1r-2014, Ventilation for Acceptable Indoor Air Quality ANSI/ASHRAE Addendum 62.2c-2011, ANSI/ASHRAE Addendum 62.2e-2011, Approved: 10/6/2014 Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality Manager of Standards in Low-Rise Residential Buildings in Low-Rise Residential Buildings Attn: Jim Heldenbrand ASHRAE Approved: 2/3/2011 Approved: 3/3/2011 1791 Tullie Circle, N.E. Manager of Standards Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. ANSI/ASHRAE Addendum 62.1s-2014, Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Ventilation for Acceptable Indoor Air Quality Approved: 1/23/2014 ANSI/ASHRAE Addendum 62.2c-2015, ANSI/ASHRAE Addendum 62.2e-2014, Manager of Standards Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality Attn: Jim Heldenbrand ASHRAE in Low-Rise Residential Buildings in Low-Rise Residential Buildings 1791 Tullie Circle, N.E. Approved: 12/2/2015 Approved: 7/3/2014 Atlanta Ge 30329-5478 Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Addendum 62.1s-2019, 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Ventilation for Acceptable Indoor Air Quality Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Approved: 7/24/2019 Manager of Standards ANSI/ASHRAE Addendum 62.2C-2019, ANSI/ASHRAE Addendum 62.2f-2012, Attn: Jim Heldenbrand ASHRAE Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality 1791 Tullie Circle, N.E. in Residential Buildings in Low-Rise Residential Buildings Atlanta Ge 30329-5478 Approved: 6/27/2019 Approved: 1/26/2012 Manager of Standards Manager of Standards ANSI/ASHRAE Addendum 62.1t-2010, Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Ventilation for Acceptable Indoor Air Quality 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Approved: 1/28/2010 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Manager of Standards Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Addendum 62.2d-2009, ANSI/ASHRAE Addendum 62.2f-2014, 1791 Tullie Circle, N.E. Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality Atlanta Ge 30329-5478 in Low-Rise Residential Buildings in Low-Rise Residential Buildings Approved: 1/29/2009 Approved: 7/3/2014 ANSI/ASHRAE Addendum 62.2a-2014, Manager of Standards Manager of Standards Ventilation and Acceptable Indoor Air Quality Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE in Low-Rise Residential Buildings 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Approved: 7/31/2014 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Manager of Standards Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Addendum 62.2d-2015, ANSI/ASHRAE Addendum 62.2g-2011, 1791 Tullie Circle, N.E. Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality Atlanta Ge 30329-5478 in Low-Rise Residential Buildings in Low-Rise Residential Buildings Approved: 2/25/2015 Approved: 2/3/2011 ANSI/ASHRAE Addendum 62.2b-2011, Manager of Standards Manager of Standards Ventilation and Acceptable Indoor Air Quality Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE in Low-Rise Residential Buildings 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Approved: 2/3/2011 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Manager of Standards Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Addendum 62.2d-2017, ANSI/ASHRAE Addendum 62.2g-2014, 1791 Tullie Circle, N.E. Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality Atlanta Ge 30329-5478 in Residential Buildings in Low-Rise Residential Buildings Approved: 6/29/2017 Approved: 10/29/2014 ANSI/ASHRAE Addendum 62.2b-2014, Manager of Standards Manager of Standards Ventilation and Acceptable Indoor Air Quality Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE in Low-Rise Residential Buildings 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Approved: 7/31/2014 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 64 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Addendum 62.2h-2011, ANSI/ASHRAE Addendum 62.2j-2018, ANSI/ASHRAE Addendum 62.2m-2018, Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings in Residential Buildings in Residential Buildings Approved: 2/3/2011 Approved: 2/21/2018 Approved: 2/21/2018 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 62.2h-2015, ANSI/ASHRAE Addendum 62.2k-2012, ANSI/ASHRAE Addendum 62.2n-2010, Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings in Low-Rise Residential Buildings in Low-Rise Residential Buildings Approved: 7/2/2015 Approved: 2/24/2012 Approved: 1/28/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 62.2h-2018, ANSI/ASHRAE Addendum 62.2L-2011, ANSI/ASHRAE Addendum 62.2n-2012, Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality in Residential Buildings in Low-Rise Residential Buildings in Low-Rise Residential Buildings Approved: 2/21/2018 Approved: 7/29/2011 Approved: 1/26/2012 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 62.2i-2011, ANSI/ASHRAE Addendum 62.2L-2017, ANSI/ASHRAE Addendum 62.2n-2015, Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings in Residential Buildings in Low-Rise Residential Buildings Approved: 7/29/2011 Approved: 2/2/2017 Approved: 12/2/2015 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 62.2j-2010, ANSI/ASHRAE Addendum 62.2m-2010, ANSI/ASHRAE Addendum 62.2o-2010, Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings in Low-Rise Residential Buildings in Low-Rise Residential Buildings Approved: 2/24/2010 Approved: 1/28/2010 Approved: 1/28/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 62.2j-2012, ANSI/ASHRAE Addendum 62.2m-2012, ANSI/ASHRAE Addendum 62.2o-2016, Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings in Low-Rise Residential Buildings in Low-Rise Residential Buildings Approved: 2/24/2012 Approved: 2/24/2012 Approved: 1/28/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 62.2j-2015, ANSI/ASHRAE Addendum 62.2m-2015, ANSI/ASHRAE Addendum 62.2p-2010, Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings in Low-Rise Residential Buildings in Low-Rise Residential Buildings Approved: 7/2/2015 Approved: 11/2/2015 Approved: 1/28/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 65 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Addendum 62.2p-2016, ANSI/ASHRAE Addendum 62.2t-2014, ANSI/ASHRAE Addendum 90.4d-2019, Energy Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality Standard for Data Centers in Low-Rise Residential Buildings in Low-Rise Residential Buildings Approved: 6/27/2019 Approved: 1/28/2016 Approved: 1/23/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum a to ANSI/ASHRAE ANSI/ASHRAE Addendum 62.2q-2010, ANSI/ASHRAE Addendum 62.2t-2019, Standard 140-2014, Standard Method of Test Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality for the Evaluation of Building Energy Analysis in Low-Rise Residential Buildings in Residential Buildings Computer Programs Approved: 2/24/2010 Approved: 6/27/2019 Approved: 7/3/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum 62.2q-2012, ANSI/ASHRAE Addendum 62.2u-2013, ANSI/ASHRAE Addendum a to ANSI/ASHRAE Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality Standard 145.2-2014, Test Method for in Low-Rise Residential Buildings in Low-Rise Residential Buildings Assessing the Performance of Gas-Phase Air- Approved: 6/28/2012 Approved: 2/28/2013 Cleaning Systems: Air-Cleaning Devices Manager of Standards Manager of Standards Approved: 7/3/2014 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 62.2r-2010, ANSI/ASHRAE Addendum 62.2v-2013, Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality ANSI/ASHRAE Addendum a to ANSI/ASHRAE in Low-Rise Residential Buildings in Low-Rise Residential Buildings Standard 161-2018, Air Quality within Approved: 2/24/2010 Approved: 1/30/2013 Commercial Aircraft Manager of Standards Manager of Standards Approved: 1/17/2019 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum 62.2r-2016, ANSI/ASHRAE Addendum 62.2w-2016, Ventilation and Acceptable Indoor Air Quality Ventilation and Acceptable Indoor Air Quality ANSI/ASHRAE Addendum a to ANSI/ASHRAE in Low-Rise Residential Buildings in Low-Rise Residential Buildings Standard 185.1-2019, Method of Testing UV- Approved: 1/28/2016 Approved: 1/28/2016 C Lights for Use in Air-Handling Units or Air Manager of Standards Manager of Standards Ducts to Inactivate Airborne Microorganisms Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Approved: 7/25/2019 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. ANSI/ASHRAE Addendum 62.2s-2017, ANSI/ASHRAE Addendum 84a-2013, Method of Atlanta Ge 30329-5478 Ventilation and Acceptable Indoor Air Quality Testing Air-to-Air Heat/Energy Exchangers in Low-Rise Residential Buildings Approved: 6/27/2013 ANSI/ASHRAE Addendum a to ANSI/ASHRAE Approved: 2/2/2017 Manager of Standards Standard 188-2018, Legionellosis: Risk Manager of Standards Attn: Jim Heldenbrand ASHRAE Management for Building Water Systems Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Approved: 1/17/2019 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Addendum 90.2b-2010, Energy- 1791 Tullie Circle, N.E. ANSI/ASHRAE Addendum 62.2t-2010, Efficient Design Of Low-Rise Residential Atlanta Ge 30329-5478 Ventilation and Acceptable Indoor Air Quality Buildings in Low-Rise Residential Buildings Approved: 7/1/2010 ANSI/ASHRAE Addendum a to ANSI/ASHRAE Approved: 1/28/2010 Manager of Standards Standard 200-2015, Methods of Testing Manager of Standards Attn: Jim Heldenbrand ASHRAE Chilled Beams Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Approved: 7/2/2015 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 66 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Addendum a to ANSI/ASHRAE ANSI/ASHRAE Addendum ao to ANSI/ASHRAE ANSI/ASHRAE Addendum ax to ANSI/ASHRAE Standard 206-2014, Method of Test for Standard 135-2012, BACnet - A Data Standard 135-2014, BACnet - A Data Rating of Multi-Purpose Heat Pumps for Communication Protocol for Building Communication Protocol for Building Residential Space Conditioning and Water Automation and Control Networks Automation and Control Networks Heating Approved: 10/27/2012 Approved: 7/3/2014 Approved: 1/23/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum ar to Standard 135 ANSI/ASHRAE Addendum az to ANSI/ASHRAE ANSI/ASHRAE Addendum ak to ANSI/ASHRAE -2013, BACnet - A Data Communication Standard 135-2014, BACnet - A Data Standard 34-2010, Designation and Safety Protocol for Building Automation and Control Communication Protocol for Building Classification of Refrigerants Networks Automation and Control Networks Approved: 7/24/2013 Approved: 1/30/2013 Approved: 7/3/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum ak to ANSI/ASHRAE ANSI/ASHRAE Addendum at to ANSI/ASHRAE ANSI/ASHRAE Addendum b to ANSI/ASHRAE Standard 34-2017, Designation and Safety Standard 135-2014, BACnet - A Data Standard 145.2-2014, Test Method for Classification of Refrigerants Communication Protocol for Building Assessing the Performance of Gas-Phase Air- Approved: 2/2/2017 Automation and Control Networks Cleaning Systems: Air-Cleaning Devices Manager of Standards Approved: 7/3/2014 Approved: 7/3/2014 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum al to ANSI/ASHRAE Standard 34-2017, Designation and Safety ANSI/ASHRAE Addendum au to ANSI/ASHRAE ANSI/ASHRAE Addendum b to ANSI/ASHRAE Classification of Refrigerants Standard 135-2014, BACnet - A Data Standard 15-2008, Safety Standard for Approved: 2/2/2017 Communication Protocol for Building Refrigeration Systems Manager of Standards Automation and Control Networks Approved: 1/24/2008 Attn: Jim Heldenbrand ASHRAE Approved: 7/3/2014 Manager of Standards 1791 Tullie Circle, N.E. Manager of Standards Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum am to ANSI/ASHRAE Atlanta Ge 30329-5478 Standard 34-20137, Designation and Safety ANSI/ASHRAE Addendum b to ANSI/ASHRAE Classification of Refrigerants ANSI/ASHRAE Addendum av to ANSI/ASHRAE Standard 160-2012, Criteria for Moisture- Approved: 2/2/2017 Standard 135-2014, BACnet - A Data Control Design Analysis in Buildings Manager of Standards Communication Protocol for Building Approved: 10/27/2012 Attn: Jim Heldenbrand ASHRAE Automation and Control Networks Manager of Standards 1791 Tullie Circle, N.E. Approved: 7/3/2014 Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum an to ANSI/ASHRAE 1791 Tullie Circle, N.E. Standard 135-2014, BACnet - A Data Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum b to ANSI/ASHRAE Communication Protocol for Building Standard 161-2018, Air Quality within Automation and Control Networks ANSI/ASHRAE Addendum aw to ANSI/ASHRAE Commercial Aircraft Approved: 7/3/2014 Standard 135-2014, BACnet - A Data Approved: 1/17/2019 Manager of Standards Communication Protocol for Building Manager of Standards Attn: Jim Heldenbrand ASHRAE Automation and Control Networks Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Approved: 7/3/2014 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Addendum an to ANSI/ASHRAE 1791 Tullie Circle, N.E. ANSI/ASHRAE Addendum b to ANSI/ASHRAE Standard 34-2017, Designation and Safety Atlanta Ge 30329-5478 Standard 200-2015, Methods of Testing Classification of Refrigerants Chilled Beams Approved: 2/2/2017 Approved: 4/1/2017 Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 67 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Addendum b to ANSI/ASHRAE ANSI/ASHRAE Addendum c Standard 52.2-2015, ANSI/ASHRAE Addendum e to ANSI/ASHRAE Standard 206-2014, Method of Test for Method of Testing General Ventilation Air Standard 15-2008, Safety Standard for Rating of Multi-Purpose Heat Pumps for Cleaning Devices for Removal Efficiency by Refrigeration Systems Residential Space Conditioning and Water Particle Size Approved: 1/24/2008 Heating Approved: 7/28/2015 Manager of Standards Approved: 7/3/2014 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum f to ANSI/ASHRAE ANSI/ASHRAE Addendum c to ANSI/ASHRAE Standard 15-2017, Safety Standard for ANSI/ASHRAE Addendum b to ANSI/ASHRAE Standard 145.2-2014, Test Method for Refrigeration Systems Standard 52.2-2014, Method of Testing Assessing the Performance of Gas-Phase Air- Approved: 2/2/2017 General Ventilation Air Cleaning Devices for Cleaning Systems: Air-Cleaning Devices Manager of Standards Removal Efficiency by Particle Size Approved: 7/3/2014 Attn: Jim Heldenbrand ASHRAE Approved: 7/31/2014 Manager of Standards 1791 Tullie Circle, N.E. Manager of Standards Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum f to ANSI/ASHRAE Atlanta Ge 30329-5478 Standard 62.1-2007, Ventilation for ANSI/ASHRAE Addendum c to ANSI/ASHRAE Acceptable Indoor Air Quality ANSI/ASHRAE Addendum br to ANSI/ASHRAE Standard 15-2007, Safety Standard for Approved: 6/26/2008 Standard 135-2019, BACnet - A Data Refrigeration Systems Manager of Standards Communication Protocol for Building Approved: 6/26/2008 Attn: Jim Heldenbrand ASHRAE Automation and Control Networks Manager of Standards 1791 Tullie Circle, N.E. Approved: 8/26/2019 Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Manager of Standards 1791 Tullie Circle, N.E. ANSI/ASHRAE Addendum g to 90.4-2019, Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Energy Standard for Data Centers Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum c to ANSI/ASHRAE Approved: 6/27/2019 Standard 161-2018, Air Quality within Manager of Standards ANSI/ASHRAE Addendum bt to ANSI/ASHRAE Commercial Aircraft Attn: Jim Heldenbrand ASHRAE Standard 135-2019, BACnet - A Data Approved: 1/17/2019 1791 Tullie Circle, N.E. Communication Protocol for Building Manager of Standards Atlanta Ge 30329-5478 Automation and Control Networks Attn: Jim Heldenbrand ASHRAE Approved: 8/26/2019 1791 Tullie Circle, N.E. ANSI/ASHRAE Addendum i to ANSI/ASHRAE Standard 135-2012, BACnet - A Data Manager of Standards Atlanta Ge 30329-5478 Communication Protocol for Building Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. ANSI/ASHRAE Addendum c to ANSI/ASHRAE Automation and Control Networks Atlanta Ge 30329-5478 Standard 206-2014, Method of Test for Approved: 10/27/2012 Rating of Multi-Purpose Heat Pumps for Manager of Standards ANSI/ASHRAE Addendum bu to ANSI/ASHRAE Residential Space Conditioning and Water Attn: Jim Heldenbrand ASHRAE Standard 135-2019, BACnet - A Data Heating 1791 Tullie Circle, N.E. Communication Protocol for Building Approved: 7/3/2014 Atlanta Ge 30329-5478 Automation and Control Networks Manager of Standards ANSI/ASHRAE Addendum k to ANSI/ASHRAE Approved: 8/26/2019 Attn: Jim Heldenbrand ASHRAE Standard 135.1-2012, Method of Test for Manager of Standards 1791 Tullie Circle, N.E. Conformance to BACnet Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Approved: 10/27/2012 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum d to ANSI/ASHRAE Manager of Standards Standard 188-2017, Legionellosis: Risk Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Addendum bw to ANSI/ASHRAE Management for Building Water Systems 1791 Tullie Circle, N.E. Standard 135-2019, BACnet - A Data Approved: 2/2/2017 Atlanta Ge 30329-5478 Communication Protocol for Building Manager of Standards ANSI/ASHRAE Addendum l Standard 135.1 Automation and Control Networks Attn: Jim Heldenbrand ASHRAE Approved: 8/26/2019 1791 Tullie Circle, N.E. -2012, Method of Test for Conformance to BACnet Manager of Standards Atlanta Ge 30329-5478 Approved: 1/26/2012 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. ANSI/ASHRAE Addendum d to ANSI/ASHRAE Manager of Standards Atlanta Ge 30329-5478 Standard 52.2-2014, Method of Testing Attn: Jim Heldenbrand ASHRAE General Ventilation Air Cleaning Devices for 1791 Tullie Circle, N.E. Removal Efficiency by Particle Size Atlanta Ge 30329-5478 Approved: 7/3/2014 Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 68 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Addendum m to ANSI/ASHRAE ANSI/ASHRAE Addendum q to ANSI/ASHRAE ANSI/ASHRAE Standard 110-2016, Method of Standard 135.1-2012, Method of Test for Standard 55-2010, Thermal Environmental Testing Performance of Laboratory Fume Conformance to BACnet Conditions for Human Occupancy Hoods Approved: 10/27/2012 Approved: 7/24/2013 Approved: 4/1/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Addendum n to 135.1-2012, ANSI/ASHRAE Addendum r to ANSI/ASHRAE ANSI/ASHRAE Standard 111-2008 (R2017), Method of Test for Conformance to BACnet Standard 34-2016, Designation and Safety Measurement, Testing, Adjusting and Approved: 1/26/2012 Classification of Refrigerants Balancing of Building HVAC Systems Manager of Standards Approved: 1/17/2019 Approved: 11/1/2017 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum o to ANSI/ASHRAE Standard 55-2010, Thermal Environmental ANSI/ASHRAE Addendum s to ANSI/ASHRAE ANSI/ASHRAE Standard 113-2013, Method of Conditions for Human Occupancy Standard 34-2016, Designation and Safety Testing for Room Air Diffusion Approved: 7/24/2013 Classification of Refrigerants Approved: 1/30/2013 Manager of Standards Approved: 1/17/2019 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum o to ANSI/ASHRAE ANSI/ASHRAE Standard 116-2010, Methods of Standard 62.1-2010, Ventilation for ANSI/ASHRAE Addendum t to ANSI/ASHRAE Testing for Rating Seasonal Efficiency of Acceptable Indoor Air Quality Standard 62.1-2016, Ventilation for Unitary Air Conditioners and Heat Pumps Approved: 7/24/2013 Acceptable Indoor Air Quality Approved: 2/24/2010 Manager of Standards Approved: 1/17/2019 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum p to ANSI/ASHRAE ANSI/ASHRAE Standard 118.1-2012, Method of Standard 34-2019, Designation and Safety ANSI/ASHRAE Addendum v to ANSI/ASHRAE Testing for Rating Commercial Gas, Electric Classification of Refrigerants Standard 34-2016, Designation and Safety and Oil Service Water Heating Equipment Approved: 8/26/2019 Classification of Refrigerants Approved: 10/27/2012 Manager of Standards Approved: 1/17/2019 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum p to ANSI/ASHRAE ANSI/ASHRAE Standard 118.2-2006 (R2015), Standard 55-2010, Thermal Environmental ANSI/ASHRAE Standard 103-2017, Method of Method of Testing for Rating Residential Conditions for Human Occupancy Testing for Annual Fuel Utilization Efficiency Water Heaters Approved: 7/24/2013 of Residential Central Furnaces and Boilers Approved: 7/2/2015 Manager of Standards Approved: 7/3/2017 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Addendum q to ANSI/ASHRAE ANSI/ASHRAE Standard 120-2017, Method of Standard 34-2016, Designation and Safety ANSI/ASHRAE Standard 105-2014, Standard Testing to Determine Flow Resistance of Classification of Refrigerants Methods for Determining, Expressing and HVAC Ducts and Fittings Approved: 1/17/2019 Comparing Building Energy Performance and Approved: 2/1/2017 Manager of Standards Greenhouse Gas Emissions Manager of Standards Attn: Jim Heldenbrand ASHRAE Approved: 2/19/2014 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Manager of Standards 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 69 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Standard 124-2007 (R2016), ANSI/ASHRAE Standard 135.1o-2014, Method ANSI/ASHRAE Standard 145.1-2015, Laboratory Methods of Testing for Rating Combination of Test for Conformance to BACnet Test Method for Assessing the Performance Space-Heating and Water-Heating Appliances Approved: 12/31/2014 of Gas-Phase Air-Cleaning Systems: Loose Approved: 11/30/2016 Manager of Standards Granular Media Manager of Standards Attn: Jim Heldenbrand ASHRAE Approved: 4/1/2015 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Manager of Standards 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. ANSI/ASHRAE Standard 137-2013 (R2017), Atlanta Ge 30329-5478 ANSI/ASHRAE Standard 125-2016, Method of Methods of Testing for Efficiency of Space- Testing Thermal Energy Meters for Liquid Conditioning/Water Heating Appliances that ANSI/ASHRAE Standard 145.2-2011, Laboratory Streams in HVAC Systems Include a Desuperheater Water Heater Test Method for Assessing the Performance Approved: 12/31/2015 Approved: 2/8/2017 of Gas-Phase Air Cleaning Systems: Air Manager of Standards Manager of Standards Cleaning Devices Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Approved: 7/27/2011 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. ANSI/ASHRAE Standard 127-2012, Method of ANSI/ASHRAE Standard 138-2013 (R2016), Atlanta Ge 30329-5478 Testing for Rating Computer and Data Method of Testing for Rating Ceiling Panels Processing Room Unitary Air Conditioners for Sensible Heating and Cooling ANSI/ASHRAE Standard 146-2011, Methods of Approved: 2/24/2012 Approved: 11/30/2016 Testing and Rating Pool Heaters Manager of Standards Manager of Standards Approved: 2/3/2011 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE Standard 128-2018, Method of ANSI/ASHRAE Standard 139-2019, Method of Rating Portable Air Conditioners Testing for Rating Desiccant Dehumidifiers ANSI/ASHRAE Standard 147-2013, Reducing the Approved: 6/1/2018 Utilizing Heat for the Regeneration Process Release of Halogenated Refrigerants from Manager of Standards Approved: 1/22/2019 Refrigerating and Air-Conditioning Equipment Attn: Jim Heldenbrand ASHRAE Manager of Standards and Systems 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Approved: 6/27/2013 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Standard 130-2016, Laboratory 1791 Tullie Circle, N.E. Methods of Testing Air Terminal Units ANSI/ASHRAE Standard 140-2014, Method of Atlanta Ge 30329-5478 Approved: 10/31/2016 Test for the Evaluation of Building Energy Manager of Standards Analysis Computer Programs ANSI/ASHRAE Standard 15-2016, Safety Code Attn: Jim Heldenbrand ASHRAE Approved: 9/26/2001 for Mechanical Refrigeration 1791 Tullie Circle, N.E. Manager of Standards Approved: 8/23/2001 Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Standard 133-2015, Method of Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Testing Direct Evaporative Air Coolers Atlanta Ge 30329-5478 Approved: 2/2/2015 ANSI/ASHRAE Standard 140a-2017, Standard Manager of Standards Method of Test for the Evaluation of Building ANSI/ASHRAE Standard 150-2019, Method of Attn: Jim Heldenbrand ASHRAE Energy Analysis Computer Programs Testing the Performance of Cool Storage 1791 Tullie Circle, N.E. Approved: 5/1/2017 Systems Atlanta Ge 30329-5478 Manager of Standards Approved: 5/31/2019 Attn: Jim Heldenbrand ASHRAE Manager of Standards ANSI/ASHRAE Standard 135-2016, BACnet – A 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Data Communication Protocol for Building Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Automation and Control Networks Atlanta Ge 30329-5478 Approved: 12/19/1995 ANSI/ASHRAE Standard 143-2015, Method of Manager of Standards Test for Rating Indirect Evaporative Coolers ANSI/ASHRAE Standard 152-2014, Method of Attn: Jim Heldenbrand ASHRAE Approved: 2/2/2015 Test for Determining the Design and Seasonal 1791 Tullie Circle, N.E. Manager of Standards Efficiencies of Residential Thermal Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Distribution Systems 1791 Tullie Circle, N.E. Approved: 2/19/2014 ANSI/ASHRAE Standard 135.1-2013, Method of Atlanta Ge 30329-5478 Manager of Standards Testing Conformance to BACnet Attn: Jim Heldenbrand ASHRAE Approved: 8/6/2003 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 70 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Standard 153-2015, Method of ANSI/ASHRAE Standard 15h-2018, Safety ANSI/ASHRAE Standard 164.2-2012 (R2016), Test for Mass Flow Capacity of Four-Way Standard for Refrigeration Systems Method of Test for Self-Contained Residential Refrigerant Reversing Valves Approved: 10/1/2018 Humidifiers Approved: 5/1/2015 Manager of Standards Approved: 12/31/2015 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Standard 16-2016, Method of ANSI/ASHRAE Standard 154-2016, Ventilation Testing for Rating Room Air Conditioners, ANSI/ASHRAE Standard 164.3-2015, Method of for Commercial Cooking Operations Packaged Terminal Air Conditioners and Test for Commercial and Industrial Approved: 8/1/2016 Packaged Terminal Heat Pumps for Cooling Isothermal Humidifiers Manager of Standards and Heating Capacity Approved: 3/2/2015 Attn: Jim Heldenbrand ASHRAE Approved: 10/31/2016 Manager of Standards 1791 Tullie Circle, N.E. Manager of Standards Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE Standard 158.1-2019, Methods of Atlanta Ge 30329-5478 Testing Capacity of Refrigerant Solenoid ANSI/ASHRAE Standard 169-2013, Weather Valves ANSI/ASHRAE Standard 160-2009, Criteria for Data for Building Design Standards Approved: 5/31/2019 Moisture-Control Design Analysis in Buildings Approved: 1/27/2006 Manager of Standards Approved: 1/29/2009 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Standard 15a-2018, Safety ANSI/ASHRAE Standard 17-2015, Method of Standard for Refrigeration Systems ANSI/ASHRAE Standard 160d-2016, Criteria for Testing Capacity of Thermostatic Refrigerant Approved: 6/28/2018 Moisture-Control Design Analysis in Buildings Expansion Valves Manager of Standards Approved: 8/1/2016 Approved: 2/2/2015 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Standard 15c-2016, Safety Standard for Refrigeration Systems ANSI/ASHRAE Standard 160e-2016, Criteria for ANSI/ASHRAE Standard 170-2013, Ventilation Approved: 6/30/2016 Moisture-Control Design Analysis in Buildings of Health Care Facilities Manager of Standards Approved: 11/30/2016 Approved: 7/24/2008 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Standard 15e-2016, Safety Standard for Refrigeration Systems ANSI/ASHRAE Standard 161-2018, Air Quality ANSI/ASHRAE Standard 171-2017, Method of Approved: 6/30/2016 Within Commercial Aircraft Testing for Rating Seismic and Wind Manager of Standards Approved: 4/2/2008 Restraints Attn: Jim Heldenbrand ASHRAE Manager of Standards Approved: 6/1/2017 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Manager of Standards Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. ANSI/ASHRAE Standard 15e-2018, Safety Atlanta Ge 30329-5478 Standard for Refrigeration Systems ANSI/ASHRAE Standard 161a-2017, Air Quality Approved: 6/28/2018 within Commercial Aircraft ANSI/ASHRAE Standard 172-2017, Method of Manager of Standards Approved: 3/2/2017 Tests for Insoluble Materials in Synthetic Attn: Jim Heldenbrand ASHRAE Manager of Standards Lubricants and HFC Refrigerant Systems 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Approved: 4/1/2017 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Standard 15g-2016, 1791 Tullie Circle, N.E. ANSI/ASHRAE Standard 15-2013, Safety ANSI/ASHRAE Standard 164.1-2012 (R2016), Atlanta Ge 30329-5478 Standard for Refrigeration Systems Method of Test for Residential Central- Approved: 6/30/2016 System Humidifiers Manager of Standards Approved: 12/31/2015 Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 71 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Standard 173-2012 (R2016), ANSI/ASHRAE Standard 185.2-2014, Method of ANSI/ASHRAE Standard 199-2016, Method of Method of Test to Determine the Testing Ultraviolet Lamps for Use in HVAC&R Testing the Performance of Industrial Pulse Performance of Halocarbon Refrigerant Leak Units or Air Ducts to Inactivate Cleaned Dust Collectors Detectors Microorganisms on Irradiated Surfaces Approved: 6/1/2016 Approved: 12/31/2015 Approved: 7/3/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Standard 20-1997 (R2016), ANSI/ASHRAE Standard 174-2018, Method of ANSI/ASHRAE Standard 188-2015, Legionellosis: Methods of Testing for Rating Remote Test for Rating Desiccant-Based Risk Management for Building Water Systems Mechanical-Draft Air-Cooled Refrigerant Dehumidification Equipment Approved: 6/26/2015 Condensers Approved: 8/30/2018 Manager of Standards Approved: 6/1/2016 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Standard 190-2013, Method of ANSI/ASHRAE Standard 18-2008 (R2013), Testing for Rating Indoor Pool Dehumidifiers ANSI/ASHRAE Standard 200-2018, Methods of Methods of Testing for Rating Drinking-Water Approved: 5/3/2013 Testing Chilled Beams Coolers with Self-Contained Mechanical Manager of Standards Approved: 12/7/2018 Refrigeration Attn: Jim Heldenbrand ASHRAE Manager of Standards Approved: 1/30/2013 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Manager of Standards Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. ANSI/ASHRAE Standard 193-2010 (R2014), Atlanta Ge 30329-5478 Method of Test for Determining Airtightness ANSI/ASHRAE Standard 203-2018, Method of of HVAC Equipment Test for Determining Heat Gain of Office ANSI/ASHRAE Standard 181-2018, Methods of Approved: 1/23/2014 Equipment Used in Buildings Testing for Rating Liquid-to-Liquid Heat Manager of Standards Approved: 5/1/2018 Exchangers Attn: Jim Heldenbrand ASHRAE Manager of Standards Approved: 5/1/2018 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Manager of Standards Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. ANSI/ASHRAE Standard 194-2017, Method of Atlanta Ge 30329-5478 Test for Direct-Expansion Ground-Source ANSI/ASHRAE Standard 206-2013 (R2017), Heat Pumps Method of Testing for Rating of Multi- ANSI/ASHRAE Standard 182-2008 (R2013), Approved: 12/1/2017 Purpose Heat Pumps for Residential Space Method of Testing Absorption Water-Chilling Manager of Standards Conditioning and Water Heating and Water-Heating Packages Attn: Jim Heldenbrand ASHRAE Approved: 6/1/2017 Approved: 6/27/2013 1791 Tullie Circle, N.E. Manager of Standards Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. ANSI/ASHRAE Standard 195-2013, Method of Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Test for Rating Air Terminal Unit Controls Approved: 6/27/2013 ANSI/ASHRAE Standard 209-2018, Energy ANSI/ASHRAE Standard 184-2016, Method of Manager of Standards Simulation Aided Design for Buildings except Test for Field Performance of Liquid-Chilling Attn: Jim Heldenbrand ASHRAE Low-Rise Residential Buildings Systems 1791 Tullie Circle, N.E. Approved: 4/2/2018 Approved: 10/31/2016 Atlanta Ge 30329-5478 Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Standard 198-2013, Method of Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Test for Rating DX-Dedicated Outdoor Air Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Systems for Moisture Removal Capacity and Moisture Removal Efficiency ANSI/ASHRAE Standard 212-2019, Method of ANSI/ASHRAE Standard 185.1-2015, Method of Approved: 1/30/2013 Test for Determining Energy Performance Testing UVC Lights for Use in Air Handling Manager of Standards and Water-Use Efficiency of Add-On Units or Air Ducts to Inactivate Airborne Attn: Jim Heldenbrand ASHRAE Evaporative Pre-Coolers for Unitary Air Microorganisms 1791 Tullie Circle, N.E. Conditioning Equipment Approved: 4/1/2015 Atlanta Ge 30329-5478 Approved: 6/25/2019 Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 72 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Standard 214-2017, Standard for ANSI/ASHRAE Standard 25-2018, Methods of ANSI/ASHRAE Standard 33-2016, Methods of Determining and Expressing Building Energy Testing Forced Circulation Free-Delivery Unit Testing Forced Circulation Air Cooling and Air Performance in a Rating Program Coolers for Refrigeration Heating Coils Approved: 4/7/2017 Approved: 12/17/2018 Approved: 4/1/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Standard 215-2018, Method of ANSI/ASHRAE Standard 26-2010, Mechanical ANSI/ASHRAE Standard 34-2016, Number Test to Determine Leakage of Operating Refrigeration and Air-Conditioning Designation and Safety Classification of HVAC Air Distribution Systems Installations Aboard Ship Refrigerants Approved: 6/1/2018 Approved: 7/1/2010 Approved: 4/24/2001 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Standard 218-2019, Method of ANSI/ASHRAE Standard 28-1996 (R2010), ANSI/ASHRAE Standard 34aa-2016, Designation Test for Lubricant and Refrigerant Miscibility Method of Testing Flow Capacity of and Safety Classification of Refrigerants Determination Refrigerant Capillary Tubes Approved: 7/27/2016 Approved: 4/18/2019 Approved: 1/28/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Standard 34ae-2016, Designation ANSI/ASHRAE Standard 22-2018, Methods of ANSI/ASHRAE Standard 29-2018, Methods of and Safety Classification of Refrigerants Testing for Rating Liquid-Cooled Refrigerant Testing Automatic Ice Makers Approved: 7/27/2016 Condensers Approved: 10/29/2018 Manager of Standards Approved: 5/1/2018 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Standard 34aj-2016, Designation ANSI/ASHRAE Standard 30-2019, Method of and Safety Classification of Refrigerants ANSI/ASHRAE Standard 23.1-2019, Methods for Testing Liquid Chillers Approved: 7/27/2016 Performance Testing Positive Displacement Approved: 5/1/2019 Manager of Standards Refrigerant Compressors and Condensing Manager of Standards Attn: Jim Heldenbrand ASHRAE Units that Operate at Subcritical Pressures of Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. the Refrigerant 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Approved: 6/21/2019 Atlanta Ge 30329-5478 ANSI/ASHRAE Standard 34g-2018, Designation Manager of Standards ANSI/ASHRAE Standard 32.1-2017, Method of and Safety Classification of Refrigerants Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Testing for Rating Refrigerated Vending Approved: 6/28/2018 Atlanta Ge 30329-5478 Machines for Sealed Beverages Manager of Standards Approved: 2/2/2017 Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Standard 23.2-2014, Method of Manager of Standards 1791 Tullie Circle, N.E. Test for Rating the Performance of Positive Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Displacement Compressors that Operate at 1791 Tullie Circle, N.E. Supercritical Pressures of the Refrigerants Atlanta Ge 30329-5478 ANSI/ASHRAE Standard 34i-2018, Designation Approved: 7/3/2014 and Safety Classification of Refrigerants ANSI/ASHRAE Standard 32.2-2018, Methods of Approved: 6/28/2018 Manager of Standards Testing for Rating Pre-Mix and Post-Mix Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. Beverage Dispensing Equipment Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Approved: 6/26/2018 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 ANSI/ASHRAE Standard 24-2019, Methods of Attn: Jim Heldenbrand ASHRAE Testing for Rating Evaporators Used for 1791 Tullie Circle, N.E. ANSI/ASHRAE Standard 34o-2018, Designation Cooling Liquids Atlanta Ge 30329-5478 and Safety Classification of Refrigerants Approved: 8/26/2019 Approved: 6/28/2018 Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 73 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Standard 34w-2017, Designation ANSI/ASHRAE Standard 41.11-2014, Standard ANSI/ASHRAE Standard 41.9-2018, Standard and Safety Classification of Refrigerants Methods for Power Measurement Methods for Refrigerant Mass Flow Approved: 3/2/2017 Approved: 7/3/2014 Measurements Using Calorimeters Manager of Standards Manager of Standards Approved: 8/30/2018 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE Standard 34x-2019, Designation ANSI/ASHRAE Standard 41.2-2018, Standard and Safety Classification of Refrigerants Methods for Air Velocity and Airflow ANSI/ASHRAE Standard 52.2-2012, Method of Approved: 6/27/2019 Measurement Testing General Ventilation Air-Cleaning Manager of Standards Approved: 6/1/2018 Devices for Removal Efficiency by Particle Attn: Jim Heldenbrand ASHRAE Manager of Standards Size 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Approved: 12/2/1999 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Standard 34y-2019, Designation 1791 Tullie Circle, N.E. and Safety Classification of Refrigerants ANSI/ASHRAE Standard 41.3-2014, Standard Atlanta Ge 30329-5478 Approved: 6/27/2019 Methods for Pressure Measurement Manager of Standards Approved: 7/3/2014 ANSI/ASHRAE Standard 52.2a-2018, Method of Attn: Jim Heldenbrand ASHRAE Manager of Standards Testing General Ventilation Air Cleaning 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Devices for Removal Efficiency by Particle Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Size Atlanta Ge 30329-5478 Approved: 8/30/2018 ANSI/ASHRAE Standard 35-2014, Method of Manager of Standards Testing Desiccants for Refrigerant Drying ANSI/ASHRAE Standard 41.4-2015, Standard Attn: Jim Heldenbrand ASHRAE Approved: 1/23/2014 Method for Measuring the Proportion of 1791 Tullie Circle, N.E. Manager of Standards Lubricant in Liquid Refrigerant Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Approved: 5/1/2015 1791 Tullie Circle, N.E. Manager of Standards ANSI/ASHRAE Standard 55-2013, Thermal Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Environmental Conditions for Human 1791 Tullie Circle, N.E. Occupancy ANSI/ASHRAE Standard 37-2009 (R2019), Atlanta Ge 30329-5478 Approved: 4/16/2004 Methods of Testing for Rating Electrically Manager of Standards Driven Unitary Air-Conditioning and Heat ANSI/ASHRAE Standard 41.6-2014, Standard Attn: Jim Heldenbrand ASHRAE Pump Equipment Method for Humidity Measurement 1791 Tullie Circle, N.E. Approved: 6/21/2019 Approved: 7/3/2014 Atlanta Ge 30329-5478 Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE Standard 62.1-2016, Ventilation 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. for Acceptable Indoor Air Quality Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Approved: 5/16/2001 Manager of Standards ANSI/ASHRAE Standard 40-2014, Methods of ANSI/ASHRAE Standard 41.7-2015 (R2018), Attn: Jim Heldenbrand ASHRAE Testing for Rating Heat Operated Unitary Air- Standard Methods for Gas Flow 1791 Tullie Circle, N.E. Conditioning and Heat-Pump Equipment Measurement Atlanta Ge 30329-5478 Approved: 1/23/2014 Approved: 5/1/2018 Manager of Standards Manager of Standards ANSI/ASHRAE Standard 62.2-2016, Ventilation Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE and Acceptable Indoor Air Quality in Low-Rise 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Residential Buildings Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Approved: 2/20/2004 Manager of Standards ANSI/ASHRAE Standard 41.1-2013, Standard ANSI/ASHRAE Standard 41.8-2016 (R2019), Attn: Jim Heldenbrand ASHRAE Method for Temperature Measurement Standard Methods for Liquid Flow 1791 Tullie Circle, N.E. Approved: 1/30/2013 Measurement Atlanta Ge 30329-5478 Manager of Standards Approved: 5/1/2019 Attn: Jim Heldenbrand ASHRAE Manager of Standards ANSI/ASHRAE Standard 63.2-2017, Method of 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Testing Liquid-Line Filter Drier Filtration Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Capability Atlanta Ge 30329-5478 Approved: 6/1/2017 ANSI/ASHRAE Standard 41.10-2013, Standard Manager of Standards Methods for Volatile Refrigerant Mass Flow Attn: Jim Heldenbrand ASHRAE Measurement Using Flowmeters 1791 Tullie Circle, N.E. Approved: 6/27/2013 Atlanta Ge 30329-5478 Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 74 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE Standard 64-2011, Methods of ANSI/ASHRAE Standard 90.2-2007, Energy ANSI/ASHRAE/ACCA Standard 211-2018, Laboratory Testing Remote Mechanical-Draft Efficient Design of New Low-Rise Residential Standard for Commercial Building Energy Evaporative Refrigerant Condensers Buildings Audits Approved: 2/3/2011 Approved: 7/24/2001 Approved: 5/1/2018 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE Standard 70-2006 (R2011), ANSI/ASHRAE Standard 90.4-2016, Energy ANSI/ASHRAE/ASHE 170h-2016, Ventilation of Method of Testing the Performance of Air Standard for Data Centers Health Care Facilities Outlets and Air Inlets Approved: 7/27/2016 Approved: 6/1/2016 Approved: 2/3/2011 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE Standard 94.2-2010, Method of ANSI/ASHRAE/ASHE 170ad-2016, Ventilation of ANSI/ASHRAE Standard 72-2018, Method of Testing Thermal Storage Devices with Health Care Facilities Testing Open and Closed Commercial Electrical Input and Thermal Output Based on Approved: 7/27/2016 Refrigerators and Freezers Thermal Performance Manager of Standards Approved: 8/1/2018 Approved: 1/28/2010 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/ASHE 170d-2010, Ventilation of Health Care Facilities ANSI/ASHRAE Standard 78-1985 (R2017), ANSI/ASHRAE Standard 97-2007 (R2017), Approved: 7/10/2010 Method of Testing Flow Capacity of Suction Sealed Glass Tube Method to Test the Manager of Standards Line Filters and Filter-Driers Chemical Stability of Materials for Use within Attn: Jim Heldenbrand ASHRAE Approved: 6/1/2017 Refrigerant Systems 1791 Tullie Circle, N.E. Manager of Standards Approved: 6/1/2017 Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Manager of Standards ANSI/ASHRAE/ASHE 170f-2016, Ventilation of 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Health Care Facilities Atlanta Ge 30329-5478 Approved: 6/1/2016 ANSI/ASHRAE Standard 79-2015, Method of Manager of Standards Testing for Fan-Coil Units ANSI/ASHRAE/ACCA Addendum 180a-2012, Attn: Jim Heldenbrand ASHRAE Approved: 10/1/2015 Standard Practice for Inspection and 1791 Tullie Circle, N.E. Manager of Standards Maintenance of Commercial Buildings HVAC Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Systems 1791 Tullie Circle, N.E. Approved: 1/26/2012 ANSI/ASHRAE/ASHE 170g-2011, Ventilation of Health Care Facilities Atlanta Ge 30329-5478 Manager of Standards Attn: Jim Heldenbrand ASHRAE Approved: 3/3/2011 ANSI/ASHRAE Standard 84-2013, Method of 1791 Tullie Circle, N.E. Manager of Standards Testing Air-to-Air Heat/Energy Exchangers Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Approved: 1/30/2013 1791 Tullie Circle, N.E. Manager of Standards ANSI/ASHRAE/ACCA Standard 180-2018, Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Standard Practice for Inspection and 1791 Tullie Circle, N.E. Maintenance of Commercial Building HVAC ANSI/ASHRAE/ASHE 170m-2016, Ventilation of Atlanta Ge 30329-5478 Systems Health Care Facilities Approved: 6/11/2018 Approved: 11/30/2016 ANSI/ASHRAE Standard 86-2013 (R2016), Manager of Standards Manager of Standards Methods of Testing the Floc Point of Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Refrigeration Grade Oils 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Approved: 11/30/2016 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Manager of Standards ANSI/ASHRAE/ASHE 170r-2012, Ventilation of Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE/ACCA Standard 183-2007 1791 Tullie Circle, N.E. (R2017), Peak Cooling and Heating Load Health Care Facilities Atlanta Ge 30329-5478 Calculations in Buildings Except Low-Rise Approved: 6/28/2012 Residential Buildings Manager of Standards Approved: 11/1/2017 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 75 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/ASHE Addendum 170a-2014, ANSI/ASHRAE/ASHE Addendum 170e-2014, ANSI/ASHRAE/ASHE Addendum 170y-2013, Ventilation of Health Care Facilities Ventilation of Health Care Facilities Ventilation of Health Care Facilities Approved: 12/1/2014 Approved: 12/1/2014 Approved: 12/5/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/ASHE Addendum 170ac-2013, ANSI/ASHRAE/ASHE Addendum 170f-2016, ANSI/ASHRAE/ASHE Addendum a to Ventilation of Health Care Facilities Ventilation of Health Care Facilities ANSI/ASHRAE/ASHE Standard 189.3-2019, Approved: 7/31/2013 Approved: 6/1/2016 Design, Construction, and Operation of Manager of Standards Manager of Standards Sustainable High-Performance Health Care Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Facilities 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Approved: 7/30/2019 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Manager of Standards Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE/ASHE Addendum 170ae-2014, ANSI/ASHRAE/ASHE Addendum 170g-2015, 1791 Tullie Circle, N.E. Ventilation of Health Care Facilities Ventilation of Health Care Facilities Atlanta Ge 30329-5478 Approved: 10/6/2014 Approved: 10/1/2015 Manager of Standards Manager of Standards ANSI/ASHRAE/ASHE Addendum ab to Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE/ASHE Standard 170-2008, 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Ventilation of Health Care Facilities Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Approved: 7/24/2013 Manager of Standards ANSI/ASHRAE/ASHE Addendum 170b-2014, ANSI/ASHRAE/ASHE Addendum 170k-2016, Attn: Jim Heldenbrand ASHRAE Ventilation of Health Care Facilities Ventilation of Health Care Facilities 1791 Tullie Circle, N.E. Approved: 7/3/2014 Approved: 8/1/2016 Atlanta Ge 30329-5478 Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE/ASHE Addendum u to 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. ANSI/ASHRAE/ASHE Standard 170-2008, Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Ventilation of Health Care Facilities Approved: 7/4/2013 ANSI/ASHRAE/ASHE Addendum 170c-2016, ANSI/ASHRAE/ASHE Addendum 170L-2012, Manager of Standards Ventilation of Health Care Facilities Ventilation of Health Care Facilities Attn: Jim Heldenbrand ASHRAE Approved: 6/1/2016 Approved: 1/26/2012 1791 Tullie Circle, N.E. Manager of Standards Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. ANSI/ASHRAE/ASHE Addendum x to Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/ASHE Standard 170-2008, Ventilation of Health Care Facilities ANSI/ASHRAE/ASHE Addendum 170c-2016a, ANSI/ASHRAE/ASHE Addendum 170M-2012, Approved: 7/24/2013 Ventilation of Health Care Facilities Ventilation of Health Care Facilities Manager of Standards Approved: 6/1/2016 Approved: 1/26/2012 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/ASHE Addendum z to ANSI/ASHRAE/ASHE Standard 170-2008, ANSI/ASHRAE/ASHE Addendum 170c-2016b, ANSI/ASHRAE/ASHE Addendum 170p-2012, Ventilation of Health Care Facilities Ventilation of Health Care Facilities Ventilation of Health Care Facilities Approved: 7/24/2013 Approved: 6/1/2016 Approved: 10/27/2012 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/ASHE Standard 170b-2009, ANSI/ASHRAE/ASHE Addendum 170d-2015, ANSI/ASHRAE/ASHE Addendum 170w to Ventilation of Health Care Facilities Ventilation of Health Care Facilities Standard 170-2008, Ventilation of Health Approved: 11/16/2009 Approved: 6/1/2015 Care Facilities Manager of Standards Approved: 7/4/2013 Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 76 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/ASHE Standard 189.3-2017, ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1n ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1z Standard for the Design, Construction and -2017, Standard for the Design of High- -2017, Standard for the Design of High- Operation of Sustainable High-Performance Performance Green Buildings Except Low- Performance Green Buildings Except Low- Health Care Facilities Rise Residential Buildings Rise Residential Buildings Approved: 4/1/2017 Approved: 2/13/2017 Approved: 2/13/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/ICC/IES/USGBC 189.1ar-2018, ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1p ANSI/ASHRAE/ICC/USGBC/IES 189.1.ax-2017, Standard for the Design of High-Performance -2017, Standard for the Design of High- Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Performance Green Buildings Except Low- Green Buildings Except Low-Rise Residential Buildings Rise Residential Buildings Buildings Approved: 2/21/2018 Approved: 2/13/2017 Approved: 5/1/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/ICC/IES/USGBC 189.1i-2017, ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1t ANSI/ASHRAE/ICC/USGBC/IES 189.1aa-2017, Standard for the Design of High-Performance -2017, Standard for the Design of High- Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Performance Green Buildings Except Low- Green Buildings Except Low-Rise Residential Buildings Rise Residential Buildings Buildings Approved: 2/13/2017 Approved: 2/13/2017 Approved: 8/23/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/ICC/IES/USGBC 189.1k-2017, ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1u ANSI/ASHRAE/ICC/USGBC/IES 189.1ac-2017, Standard for the Design of High-Performance -2017, Standard for the Design of High- Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Performance Green Buildings Except Low- Green Buildings Except Low-Rise Residential Buildings Rise Residential Buildings Buildings Approved: 3/2/2017 Approved: 2/13/2017 Approved: 6/29/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/ICC/IES/USGBC 189.1L-2017, ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1x ANSI/ASHRAE/ICC/USGBC/IES 189.1ad-2017, Standard for the Design of High-Performance -2017, Standard for the Design of High- Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Performance Green Buildings Except Low- Green Buildings Except Low-Rise Residential Buildings Rise Residential Buildings Buildings Approved: 3/2/2017 Approved: 2/13/2017 Approved: 6/29/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1ab ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1y ANSI/ASHRAE/ICC/USGBC/IES 189.1ae-2017, -2017, Standard for the Design of High- -2017, Standard for the Design of High- Standard for the Design of High-Performance Performance Green Buildings Except Low- Performance Green Buildings Except Low- Green Buildings Except Low-Rise Residential Rise Residential Buildings Rise Residential Buildings Buildings Approved: 2/13/2017 Approved: 2/13/2017 Approved: 6/29/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 77 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/ICC/USGBC/IES 189.1ag-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1am-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1aw-2017, Standard for the Design of High-Performance Standard for the Design of High-Performance Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 6/29/2017 Approved: 6/29/2017 Approved: 8/23/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/ICC/USGBC/IES 189.1ah-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1ap-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1ay-2017, Standard for the Design of High-Performance Standard for the Design of High-Performance Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 5/1/2017 Approved: 5/1/2017 Approved: 8/23/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/ICC/USGBC/IES 189.1ai-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1aq-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1az-2017, Standard for the Design of High-Performance Standard for the Design of High-Performance Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 7/27/2017 Approved: 8/23/2017 Approved: 8/23/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/ICC/USGBC/IES 189.1aj-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1as-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1ba-2017, Standard for the Design of High-Performance Standard for the Design of High-Performance Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 5/1/2017 Approved: 9/12/2017 Approved: 5/1/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/ICC/USGBC/IES 189.1ak-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1au-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1bb-2017, Standard for the Design of High-Performance Standard for the Design of High-Performance Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 8/23/2017 Approved: 6/29/2017 Approved: 6/29/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/ICC/USGBC/IES 189.1al-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1av-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1bd-2017, Standard for the Design of High-Performance Standard for the Design of High-Performance Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 7/27/2017 Approved: 6/29/2017 Approved: 7/27/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 78 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/ICC/USGBC/IES 189.1be-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1bn-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1bu-2017, Standard for the Design of High-Performance Standard for the Design of High-Performance Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 8/3/2017 Approved: 7/27/2017 Approved: 6/29/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/ICC/USGBC/IES 189.1bh-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1bo-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1bv-2017, Standard for the Design of High-Performance Standard for the Design of High-Performance Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 6/29/2017 Approved: 6/29/2017 Approved: 6/29/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/ICC/USGBC/IES 189.1bi-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1bp-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1bw-2017, Standard for the Design of High-Performance Standard for the Design of High-Performance Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 6/29/2017 Approved: 6/29/2017 Approved: 7/27/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/ICC/USGBC/IES 189.1bj-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1br-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1bx-2017, Standard for the Design of High-Performance Standard for the Design of High-Performance Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 6/29/2017 Approved: 6/29/2017 Approved: 7/27/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/ICC/USGBC/IES 189.1bk-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1bs-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1bz-2017, Standard for the Design of High-Performance Standard for the Design of High-Performance Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 6/29/2017 Approved: 6/29/2017 Approved: 6/29/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/ICC/USGBC/IES 189.1bl-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1bt-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1cd-2017, Standard for the Design of High-Performance Standard for the Design of High-Performance Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 6/29/2017 Approved: 6/29/2017 Approved: 6/29/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 79 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/ICC/USGBC/IES 189.1ch-2017, ANSI/ASHRAE/ICC/USGBC/IES 189.1v-2017, ANSI/ASHRAE/IES 189.1c-2015, Standard for Standard for the Design of High-Performance Standard for the Design of High-Performance the Design of High-Performance Green Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 7/27/2017 Approved: 5/1/2017 Approved: 11/2/2015 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/ICC/USGBC/IES 189.1ck-2018, ANSI/ASHRAE/ICC/USGBC/IES 189.1w-2017, ANSI/ASHRAE/IES 202a-2017, Commissioning Standard for the Design of High-Performance Standard for the Design of High-Performance Process for Buildings and Systems Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Approved: 8/1/2017 Buildings Buildings Manager of Standards Approved: 6/28/2018 Approved: 5/1/2017 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES 202b-2018, Commissioning Process for Buildings and Systems ANSI/ASHRAE/ICC/USGBC/IES 189.1cl-2017, ANSI/ASHRAE/ICC/USGBC/IES Addendum Approved: 2/1/2018 Standard for the Design of High-Performance 189.1a-2019, Standard for the Design of Manager of Standards Green Buildings Except Low-Rise Residential High-Performance Green Buildings Except Attn: Jim Heldenbrand ASHRAE Buildings Low-Rise Residential Buildings 1791 Tullie Circle, N.E. Approved: 7/27/2017 Approved: 8/26/2019 Atlanta Ge 30329-5478 Manager of Standards Manager of Standards ANSI/ASHRAE/IES 90.1ai-2019, Energy Standard Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. for Buildings Except Low-Rise Residential Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Buildings Approved: 2/13/2019 ANSI/ASHRAE/ICC/USGBC/IES 189.1o-2017, ANSI/ASHRAE/ICC/USGBC/IES Addendum Manager of Standards Standard for the Design of High-Performance 189.1b-2019, Standard for the Design of Attn: Jim Heldenbrand ASHRAE Green Buildings Except Low-Rise Residential High-Performance Green Buildings Except 1791 Tullie Circle, N.E. Buildings Low-Rise Residential Buildings Atlanta Ge 30329-5478 Approved: 5/20/2017 Approved: 8/26/2019 ANSI/ASHRAE/IES 90.1aj-2019, Energy Standard Manager of Standards Manager of Standards for Buildings Except Low-Rise Residential Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Buildings Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Approved: 2/13/2019 Manager of Standards ANSI/ASHRAE/ICC/USGBC/IES 189.1r-2017, ANSI/ASHRAE/ICC/USGBC/IES Addendum Attn: Jim Heldenbrand ASHRAE Standard for the Design of High-Performance 189.1bm-2019, Standard for the Design of 1791 Tullie Circle, N.E. Green Buildings Except Low-Rise Residential High-Performance Green Buildings Except Atlanta Ge 30329-5478 Buildings Low-Rise Residential Buildings Approved: 7/27/2017 Approved: 7/24/2019 ANSI/ASHRAE/IES 90.1al-2019, Energy Standard for Buildings Except Low-Rise Residential Manager of Standards Manager of Standards Buildings Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Approved: 7/1/2019 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Manager of Standards Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE/ICC/USGBC/IES 189.1s-2017, ANSI/ASHRAE/ICC/USGBC/IES189.1bq-2017, 1791 Tullie Circle, N.E. Standard for the Design of High-Performance Standard for the Design of High-Performance Atlanta Ge 30329-5478 Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings ANSI/ASHRAE/IES 90.1ba-2019, Energy Approved: 5/20/2017 Approved: 6/29/2017 Standard for Buildings Except Low-Rise Residential Buildings Manager of Standards Manager of Standards Approved: 7/1/2019 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Manager of Standards Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. ANSI/ASHRAE/IES 100b-2017, Energy Efficiency Atlanta Ge 30329-5478 in Existing Buildings Approved: 7/24/2017 Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 80 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES 90.1bd-2019, Energy ANSI/ASHRAE/IES Addendum 100c-2017, ANSI/ASHRAE/IES Addendum 90.1ay-2019, Standard for Buildings Except Low-Rise Energy Efficiency in Existing Buildings Energy Standard for Buildings Except Low- Residential Buildings Approved: 11/1/2017 Rise Residential Buildings Approved: 7/1/2019 Manager of Standards Approved: 7/24/2019 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum 100d-2017, ANSI/ASHRAE/IES 90.1bg-2019, Energy Energy Efficiency in Existing Buildings ANSI/ASHRAE/IES Addendum 90.1bb-2019, Standard for Buildings Except Low-Rise Approved: 11/1/2017 Energy Standard for Buildings Except Low- Residential Buildings Manager of Standards Rise Residential Buildings Approved: 2/13/2019 Attn: Jim Heldenbrand ASHRAE Approved: 7/24/2019 Manager of Standards 1791 Tullie Circle, N.E. Manager of Standards Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum 90.1an-2019, Atlanta Ge 30329-5478 Energy Standard for Buildings Except Low- ANSI/ASHRAE/IES 90.1bl-2019, Energy Standard Rise Residential Buildings ANSI/ASHRAE/IES Addendum 90.1bf-2019, for Buildings Except Low-Rise Residential Approved: 7/24/2019 Energy Standard for Buildings Except Low- Buildings Manager of Standards Rise Residential Buildings Approved: 7/1/2019 Attn: Jim Heldenbrand ASHRAE Approved: 7/24/2019 Manager of Standards 1791 Tullie Circle, N.E. Manager of Standards Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum 90.1ao-2019, Atlanta Ge 30329-5478 Energy Standard for Buildings Except Low- ANSI/ASHRAE/IES 90.1m-2019, Energy Standard Rise Residential Buildings ANSI/ASHRAE/IES Addendum 90.1bh-2019, for Buildings Except Low-Rise Residential Approved: 7/24/2019 Energy Standard for Buildings Except Low- Buildings Manager of Standards Rise Residential Buildings Approved: 2/13/2019 Attn: Jim Heldenbrand ASHRAE Approved: 7/1/2019 Manager of Standards 1791 Tullie Circle, N.E. Manager of Standards Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum 90.1aq-2018, Atlanta Ge 30329-5478 Energy Standard for Buildings Except Low- ANSI/ASHRAE/IES 90.dz-2016, Energy Standard Rise Residential Buildings ANSI/ASHRAE/IES Addendum 90.1bi-2019, for Buildings Except Low-Rise Residential Approved: 10/1/2018 Energy Standard for Buildings Except Low- Buildings Manager of Standards Rise Residential Buildings Approved: 8/30/2016 Attn: Jim Heldenbrand ASHRAE Approved: 7/1/2019 Manager of Standards 1791 Tullie Circle, N.E. Manager of Standards Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum 90.1at-2019, Atlanta Ge 30329-5478 Energy Standard for Buildings Except Low- ANSI/ASHRAE/IES Addednum bv to Rise Residential Buildings ANSI/ASHRAE/IES Addendum 90.1bj-2019, ANSI/ASHRAE/IES Standard 90.1-2010, Approved: 7/24/2019 Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Manager of Standards Rise Residential Buildings Rise Residential Buildings Attn: Jim Heldenbrand ASHRAE Approved: 7/1/2019 Approved: 1/28/2010 1791 Tullie Circle, N.E. Manager of Standards Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. ANSI/ASHRAE/IES Addendum 90.1aw-2019, Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Energy Standard for Buildings Except Low- Rise Residential Buildings ANSI/ASHRAE/IES Addendum 90.1bk-2019, ANSI/ASHRAE/IES Addendum 100a-2017, Approved: 7/24/2019 Energy Standard for Buildings Except Low- Energy Efficiency in Existing Buildings Manager of Standards Rise Residential Buildings Approved: 11/1/2017 Attn: Jim Heldenbrand ASHRAE Approved: 7/1/2019 Manager of Standards 1791 Tullie Circle, N.E. Manager of Standards Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 81 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES Addendum 90.1bm-2019, ANSI/ASHRAE/IES Addendum 90.1ca-2019, ANSI/ASHRAE/IES Addendum 90.1cm-2019, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 8/19/2019 Approved: 6/27/2019 Approved: 8/19/2019 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum 90.1bn-2019, ANSI/ASHRAE/IES Addendum 90.1cc-2019, ANSI/ASHRAE/IES Addendum 90.1cn-2019, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 8/19/2019 Approved: 6/27/2019 Approved: 6/27/2019 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum 90.1bq-2019, ANSI/ASHRAE/IES Addendum 90.1ce-2019, ANSI/ASHRAE/IES Addendum 90.1co-2019, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/1/2019 Approved: 6/27/2019 Approved: 6/27/2019 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum 90.1bt-2019, ANSI/ASHRAE/IES Addendum 90.1cg-2019, ANSI/ASHRAE/IES Addendum 90.1t-2019, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/27/2019 Approved: 6/27/2019 Approved: 7/24/2019 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum 90.1bu-2019, ANSI/ASHRAE/IES Addendum 90.1ch-2019, ANSI/ASHRAE/IES Addendum 90.1v-2019, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 8/19/2019 Approved: 6/27/2019 Approved: 7/24/2019 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum 90.1bv-2019, ANSI/ASHRAE/IES Addendum 90.1ci-2019, ANSI/ASHRAE/IES Addendum 90.1Y-2019, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 8/19/2019 Approved: 6/27/2019 Approved: 7/1/2019 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum 90.1bx-2019, ANSI/ASHRAE/IES Addendum 90.1cj-2019, ANSI/ASHRAE/IES Addendum a to Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- ANSI/ASHRAE/IES Standard 90.1-2012, Rise Residential Buildings Rise Residential Buildings Energy Standard for Buildings Except Low- Approved: 6/27/2019 Approved: 6/27/2019 Rise Residential Buildings Manager of Standards Manager of Standards Approved: 1/26/2012 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 82 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES Addendum a to ANSI/ASHRAE/IES Addendum ac to ANSI/ASHRAE/IES Addendum ae to ANSI/ASHRAE/IES Standard 90.1-2014, ANSI/ASHRAE/IES Standard 90.1-2014, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 10/29/2014 Approved: 10/6/2014 Approved: 6/28/2018 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum a to ANSI/ASHRAE/IES Addendum ac to ANSI/ASHRAE/IES Addendum af ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/25/2018 Approved: 6/28/2018 Approved: 1/28/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum aa to ANSI/ASHRAE/IES Addendum ad to ANSI/ASHRAE/IES Addendum af to ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2015, ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/31/2013 Approved: 6/26/2015 Approved: 7/1/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum aa to ANSI/ASHRAE/IES Addendum ad to ANSI/ASHRAE/IES Addendum af to ANSI/ASHRAE/IES Standard 90.1-2015, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/26/2015 Approved: 6/28/2018 Approved: 2/12/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum ab to ANSI/ASHRAE/IES Addendum ae to ANSI/ASHRAE/IES Addendum ag to ANSI/ASHRAE/IES Standard 90.1-2015, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2009, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 3/2/2015 Approved: 8/28/2013 Approved: 6/25/2009 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

BSR/ASHRAE/IES Addendum ab to ANSI/ASHRAE/IES Addendum ae to ANSI/ASHRAE/IES Addendum ag to ANSI/ASHRAE/IESNA Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2015, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/28/2018 Approved: 6/26/2015 Approved: 8/28/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 83 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES Addendum ag to ANSI/ASHRAE/IES Addendum aj to ANSI/ASHRAE/IES Addendum al to ANSI/ASHRAE/IES Standard 90.1-2015, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/26/2015 Approved: 7/1/2013 Approved: 7/24/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum ag to ANSI/ASHRAE/IES Addendum ak to ANSI/ASHRAE/IES Addendum am ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2009, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/28/2018 Approved: 6/25/2009 Approved: 1/28/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum ah ANSI/ASHRAE/IES Addendum ak to ANSI/ASHRAE/IES Addendum am to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2014, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/28/2016 Approved: 1/23/2014 Approved: 7/1/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum ah to ANSI/ASHRAE/IES Addendum ak to ANSI/ASHRAE/IES Addendum am to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/28/2018 Approved: 6/28/2018 Approved: 6/28/2018 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum ai ANSI/ASHRAE/IES Addendum al ANSI/ASHRAE/IES Addendum an ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/26/2016 Approved: 2/24/2016 Approved: 1/28/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum aj ANSI/ASHRAE/IES Addendum al to ANSI/ASHRAE/IES Addendum an to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2007, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/28/2016 Approved: 7/1/2010 Approved: 8/28/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 84 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES Addendum ao ANSI/ASHRAE/IES Addendum aq to ANSI/ASHRAE/IES Addendum as to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/30/2016 Approved: 7/1/2013 Approved: 1/28/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum ap ANSI/ASHRAE/IES Addendum ar ANSI/ASHRAE/IES Addendum at ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/28/2016 Approved: 1/28/2016 Approved: 1/28/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum ap to ANSI/ASHRAE/IES Addendum ar to ANSI/ASHRAE/IES Addendum au ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 5/3/2013 Approved: 2/24/2010 Approved: 1/28/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum ap to ANSI/ASHRAE/IES Addendum ar to ANSI/ASHRAE/IES Addendum au to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 10/1/2018 Approved: 7/1/2013 Approved: 2/12/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum aq ANSI/ASHRAE/IES Addendum ar to ANSI/ASHRAE/IES Addendum au to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 2/24/2016 Approved: 10/1/2018 Approved: 1/17/2019 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum aq to ANSI/ASHRAE/IES Addendum as ANSI/ASHRAE/IES Addendum av ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/23/2010 Approved: 1/28/2016 Approved: 1/28/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 85 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES Addendum av to ANSI/ASHRAE/IES Addendum az ANSI/ASHRAE/IES Addendum ba to ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/24/2013 Approved: 1/28/2016 Approved: 8/28/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum aw ANSI/ASHRAE/IES Addendum az to ANSI/ASHRAE/IES Addendum bb-2012, Energy ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2013, Standard for Buildings Except Low-Rise Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 4/27/2012 Approved: 1/28/2016 Approved: 2/12/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum bb ANSI/ASHRAE/IES Addendum aw to ANSI/ASHRAE/IES Addendum az to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/28/2016 Approved: 2/12/2013 Approved: 1/17/2019 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum bc ANSI/ASHRAE/IES Addendum ax to ANSI/ASHRAE/IES Addendum b-2011, Energy ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2013, Standard for Buildings Except Low-Rise Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/30/2011 Approved: 1/28/2016 Approved: 7/1/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum b to ANSI/ASHRAE/IES Addendum bc to ANSI/ASHRAE/IES Addendum ay ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/29/2017 Approved: 7/24/2013 Approved: 8/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum ba ANSI/ASHRAE/IES Addendum bd ANSI/ASHRAE/IES Addendum ay to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 2/24/2016 Approved: 8/30/2016 Approved: 7/1/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 86 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES Addendum bd to ANSI/ASHRAE/IES Addendum bh to ANSI/ASHRAE/IES Addendum bk ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/1/2013 Approved: 9/4/2013 Approved: 6/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum be to ANSI/ASHRAE/IES Addendum bi ANSI/ASHRAE/IES Addendum bk to ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 2/12/2013 Approved: 6/30/2016 Approved: 2/12/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum be to ANSI/ASHRAE/IES Addendum bi to ANSI/ASHRAE/IES Addendum bl ANSI/ASHRAE/IES Standard 90.1-2019, ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 8/19/2019 Approved: 7/1/2010 Approved: 1/28/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum bf to ANSI/ASHRAE/IES Addendum bi to ANSI/ASHRAE/IES Addendum bl to ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 8/28/2013 Approved: 7/1/2013 Approved: 7/31/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum bg to ANSI/ASHRAE/IES Addendum bj ANSI/ASHRAE/IES Addendum bm to ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2015, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/1/2013 Approved: 7/26/2016 Approved: 6/26/2015 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum bh ANSI/ASHRAE/IES Addendum bj to ANSI/ASHRAE/IES Addendum bn ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/30/2016 Approved: 7/1/2013 Approved: 9/28/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 87 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES Addendum bn to ANSI/ASHRAE/IES Addendum bp to ANSI/ASHRAE/IES Addendum bs ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2019, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 9/4/2013 Approved: 8/19/2019 Approved: 8/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum bo ANSI/ASHRAE/IES Addendum bq ANSI/ASHRAE/IES Addendum bs ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/30/2016 Approved: 1/28/2016 Approved: 8/19/2019 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum bo to ANSI/ASHRAE/IES Addendum bq to ANSI/ASHRAE/IES Addendum bs to ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 9/4/2013 Approved: 2/12/2013 Approved: 7/23/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum bo to ANSI/ASHRAE/IES Addendum br ANSI/ASHRAE/IES Addendum bs to ANSI/ASHRAE/IES Standard 90.1-2019, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 8/26/2019 Approved: 1/28/2016 Approved: 7/31/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum bp ANSI/ASHRAE/IES Addendum br to ANSI/ASHRAE/IES Addendum bt ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/28/2016 Approved: 7/1/2013 Approved: 1/28/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum bp to ANSI/ASHRAE/IES Addendum br to ANSI/ASHRAE/IES Addendum bt to ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2019, ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/31/2013 Approved: 8/19/2019 Approved: 7/1/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 88 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES Addendum bt to ANSI/ASHRAE/IES Addendum bw to ANSI/ASHRAE/IES Addendum by to ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/24/2013 Approved: 8/28/2013 Approved: 8/28/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum bu to ANSI/ASHRAE/IES Addendum bx ANSI/ASHRAE/IES Addendum bz-2012, Energy ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2016, Standard for Buildings Except Low-Rise Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 2/24/2012 Approved: 8/16/2010 Approved: 1/28/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum bz ANSI/ASHRAE/IES Addendum bv ANSI/ASHRAE/IES Addendum bx to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 9/28/2016 Approved: 1/28/2016 Approved: 7/1/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum bz to Standard ANSI/ASHRAE/IES Addendum bv to ANSI/ASHRAE/IES Addendum bx to 90.1-2019, Energy Standard for Buildings ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2013, Except Low-Rise Residential Buildings Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Approved: 6/27/2019 Rise Residential Buildings Rise Residential Buildings Manager of Standards Approved: 7/1/2013 Approved: 2/12/2013 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum c-2011, Energy Standard for Buildings Except Low-Rise ANSI/ASHRAE/IES Addendum bw ANSI/ASHRAE/IES Addendum by Residential Buildings ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Approved: 6/30/2011 Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Manager of Standards Rise Residential Buildings Rise Residential Buildings Attn: Jim Heldenbrand ASHRAE Approved: 7/26/2016 Approved: 1/28/2016 1791 Tullie Circle, N.E. Manager of Standards Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. ANSI/ASHRAE/IES Addendum c to Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Standard 90.1-2014, Energy Standard for Buildings Except Low- ANSI/ASHRAE/IES Addendum bw to ANSI/ASHRAE/IES Addendum by to Rise Residential Buildings ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2010, Approved: 10/6/2014 Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Manager of Standards Rise Residential Buildings Rise Residential Buildings Attn: Jim Heldenbrand ASHRAE Approved: 1/28/2010 Approved: 7/1/2010 1791 Tullie Circle, N.E. Manager of Standards Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. ANSI/ASHRAE/IES Addendum c to Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Rise Residential Buildings Approved: 6/29/2017 Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 89 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES Addendum ca ANSI/ASHRAE/IES Addendum cc ANSI/ASHRAE/IES Addendum ce to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/30/2016 Approved: 1/28/2016 Approved: 7/23/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum ca to ANSI/ASHRAE/IES Addendum cc to ANSI/ASHRAE/IES Addendum ce to ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/1/2010 Approved: 7/1/2010 Approved: 7/1/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum ca to ANSI/ASHRAE/IES Addendum cc to ANSI/ASHRAE/IES Addendum cf ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/1/2013 Approved: 7/1/2013 Approved: 8/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum cb ANSI/ASHRAE/IES Addendum cd ANSI/ASHRAE/IES Addendum cf to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 8/30/2016 Approved: 10/7/2016 Approved: 8/16/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum cb to ANSI/ASHRAE/IES Addendum cd to ANSI/ASHRAE/IES Addendum cf to ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/1/2010 Approved: 8/28/2013 Approved: 8/28/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum cb to ANSI/ASHRAE/IES Addendum ce ANSI/ASHRAE/IES Addendum cf to ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2019, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 8/28/2013 Approved: 2/24/2016 Approved: 8/19/2019 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 90 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES Addendum cg ANSI/ASHRAE/IES Addendum ci ANSI/ASHRAE/IES Addendum cl ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/26/2016 Approved: 1/28/2016 Approved: 7/26/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum cg to ANSI/ASHRAE/IES Addendum cj ANSI/ASHRAE/IES Addendum cl to ANSI/ASHRAE/IES Standard 90.1-2012, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/26/2012 Approved: 1/28/2016 Approved: 7/1/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum ch ANSI/ASHRAE/IES Addendum cj to ANSI/ASHRAE/IES Addendum CL to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 9/28/2016 Approved: 7/24/2013 Approved: 7/31/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum ch to ANSI/ASHRAE/IES Addendum ck ANSI/ASHRAE/IES Addendum cl to ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2019, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/1/2010 Approved: 1/28/2016 Approved: 8/26/2019 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum ch to ANSI/ASHRAE/IES Addendum ck to ANSI/ASHRAE/IES Addendum cm ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/1/2013 Approved: 7/23/2010 Approved: 8/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum ci-2011, Energy ANSI/ASHRAE/IES Addendum ck to ANSI/ASHRAE/IES Addendum cm to Standard for Buildings Except Low-Rise ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2010, Residential Buildings Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Approved: 6/30/2011 Rise Residential Buildings Rise Residential Buildings Manager of Standards Approved: 7/1/2013 Approved: 7/24/2010 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 91 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES Addendum cn ANSI/ASHRAE/IES Addendum cq ANSI/ASHRAE/IES Addendum cu to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2019, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/30/2016 Approved: 6/30/2016 Approved: 8/19/2019 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum cn to ANSI/ASHRAE/IES Addendum cq to ANSI/ASHRAE/IES Addendum cv ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2019, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/1/2013 Approved: 8/19/2019 Approved: 6/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum co ANSI/ASHRAE/IES Addendum cr to ANSI/ASHRAE/IES Addendum cv to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/30/2016 Approved: 7/31/2013 Approved: 7/31/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum co to ANSI/ASHRAE/IES Addendum ct ANSI/ASHRAE/IES Addendum cv to ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2019, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/31/2013 Approved: 6/30/2016 Approved: 8/26/2019 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum cp ANSI/ASHRAE/IES Addendum ct to ANSI/ASHRAE/IES Addendum cw to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2019, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/30/2016 Approved: 7/31/2013 Approved: 8/26/2019 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum cp to ANSI/ASHRAE/IES Addendum ct to ANSI/ASHRAE/IES Addendum cy ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2019, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/1/2013 Approved: 8/19/2019 Approved: 10/7/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 92 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES Addendum cy to ANSI/ASHRAE/IES Addendum da to ANSI/ASHRAE/IES Addendum dd ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/31/2013 Approved: 8/28/2013 Approved: 6/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum cy to ANSI/ASHRAE/IES Addendum db ANSI/ASHRAE/IES Addendum dd to ANSI/ASHRAE/IES Standard 90.1-2019, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 8/19/2019 Approved: 6/30/2016 Approved: 7/31/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum cz to ANSI/ASHRAE/IES Addendum db to ANSI/ASHRAE/IES Addendum de ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/31/2013 Approved: 7/1/2010 Approved: 8/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum d to ANSI/ASHRAE/IES Addendum db to ANSI/ASHRAE/IES Addendum de to ANSI/ASHRAE/IES Standard 90.1-2014, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 10/6/2014 Approved: 7/31/2013 Approved: 7/24/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum d to ANSI/ASHRAE/IES Addendum dc ANSI/ASHRAE/IES Addendum de to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/29/2017 Approved: 6/30/2016 Approved: 7/31/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum da ANSI/ASHRAE/IES Addendum dc to ANSI/ASHRAE/IES Addendum df to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/30/2016 Approved: 7/31/2013 Approved: 8/16/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 93 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES Addendum dg ANSI/ASHRAE/IES Addendum di to ANSI/ASHRAE/IES Addendum dl ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/30/2016 Approved: 7/31/2013 Approved: 8/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum dg to ANSI/ASHRAE/IES Addendum dj to ANSI/ASHRAE/IES Addendum dl to ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/24/2010 Approved: 7/24/2010 Approved: 8/16/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum dg to ANSI/ASHRAE/IES Addendum dj to ANSI/ASHRAE/IES Addendum dl to ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/31/2013 Approved: 7/31/2013 Approved: 8/28/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum dh ANSI/ASHRAE/IES Addendum dk ANSI/ASHRAE/IES Addendum dm ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/30/2016 Approved: 6/30/2016 Approved: 8/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum di ANSI/ASHRAE/IES Addendum dk to ANSI/ASHRAE/IES Addendum dm to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/30/2016 Approved: 7/24/2010 Approved: 2/12/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum di to ANSI/ASHRAE/IES Addendum dk to ANSI/ASHRAE/IES Addendum dn to ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 8/16/2010 Approved: 8/28/2013 Approved: 7/24/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 94 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES Addendum dn to ANSI/ASHRAE/IES Addendum dp to ANSI/ASHRAE/IES Addendum dr to ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/31/2013 Approved: 7/31/2013 Approved: 7/31/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum dn to ANSI/ASHRAE/IES Addendum dq ANSI/ASHRAE/IES Addendum ds-2011, Energy ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Standard for Buildings Except Low-Rise Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/30/2011 Approved: 1/17/2019 Approved: 6/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum ds ANSI/ASHRAE/IES Addendum do ANSI/ASHRAE/IES Addendum dq to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/30/2016 Approved: 8/30/2016 Approved: 7/24/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum dt ANSI/ASHRAE/IES Addendum do to ANSI/ASHRAE/IES Addendum dq to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 8/30/2016 Approved: 7/24/2010 Approved: 7/31/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum dt to ANSI/ASHRAE/IES Addendum do to ANSI/ASHRAE/IES Addendum dr ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/31/2013 Approved: 7/31/2013 Approved: 6/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum du ANSI/ASHRAE/IES Addendum dp ANSI/ASHRAE/IES Addendum dr to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/28/2016 Approved: 6/30/2016 Approved: 7/24/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 95 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES Addendum dv ANSI/ASHRAE/IES Addendum e to ANSI/ASHRAE/IES Addendum ef ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2015, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/30/2016 Approved: 6/26/2015 Approved: 8/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum dv to ANSI/ASHRAE/IES Addendum e to ANSI/ASHRAE/IES Addendum eg ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/31/2013 Approved: 6/29/2017 Approved: 8/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum dw ANSI/ASHRAE/IES Addendum ea ANSI/ASHRAE/IES Addendum ej ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 8/30/2016 Approved: 8/30/2016 Approved: 8/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum dw to ANSI/ASHRAE/IES Addendum eb ANSI/ASHRAE/IES Addendum ek ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/31/2013 Approved: 8/30/2016 Approved: 8/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum dx to ANSI/ASHRAE/IES Addendum ec ANSI/ASHRAE/IES Addendum el ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/31/2013 Approved: 8/30/2016 Approved: 8/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum e-2012, Energy ANSI/ASHRAE/IES Addendum ed ANSI/ASHRAE/IES Addendum f Standard for Buildings Except Low-Rise ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Residential Buildings Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Approved: 7/26/2012 Rise Residential Buildings Rise Residential Buildings Manager of Standards Approved: 8/30/2016 Approved: 1/28/2016 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 96 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES Addendum f to ANSI/ASHRAE/IES Addendum h to ANSI/ASHRAE/IES Addendum j to ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2014, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/23/2010 Approved: 10/6/2014 Approved: 6/29/2017 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum f to ANSI/ASHRAE/IES Addendum h to ANSI/ASHRAE/IES Addendum k-2011, Energy ANSI/ASHRAE/IES Standard 90.1-2010, ANSI/ASHRAE/IES Standard 90.1-2016, Standard for Buildings Except Low-Rise Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/30/2011 Approved: 7/24/2013 Approved: 1/25/2018 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum k to ANSI/ASHRAE/IES Addendum f to ANSI/ASHRAE/IES Addendum i ANSI/ASHRAE/IES Standard 90.1-2015, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/29/2015 Approved: 6/29/2017 Approved: 8/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum k to ANSI/ASHRAE/IES Addendum g-2011, Energy ANSI/ASHRAE/IES Addendum i to ANSI/ASHRAE/IES Standard 90.1-2016, Standard for Buildings Except Low-Rise ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Residential Buildings Energy Standard for Buildings Except Low- Rise Residential Buildings Approved: 6/30/2011 Rise Residential Buildings Approved: 7/25/2018 Manager of Standards Approved: 2/12/2013 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Addendum g to ANSI/ASHRAE/IES Addendum L ANSI/ASHRAE/IES Standard 90.1-2014, ANSI/ASHRAE/IES Addendum j-2011, Energy ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Standard for Buildings Except Low-Rise Energy Standard for Buildings Except Low- Rise Residential Buildings Residential Buildings Rise Residential Buildings Approved: 10/6/2014 Approved: 6/30/2011 Approved: 9/16/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum g to ANSI/ASHRAE/IES Addendum j to ANSI/ASHRAE/IES Addendum l to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2015, ANSI/ASHRAE/IES Standard 90.1-2012, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/25/2018 Approved: 1/29/2015 Approved: 6/28/2012 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum h-2011, Energy Standard for Buildings Except Low-Rise Residential Buildings Approved: 6/30/2011 Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 97 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES Addendum L to ANSI/ASHRAE/IES Addendum o to ANSI/ASHRAE/IES Addendum q to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2012, ANSI/ASHRAE/IES Standard 90.1-2012, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/25/2018 Approved: 1/26/2012 Approved: 6/28/2012 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum m to ANSI/ASHRAE/IES Addendum o to ANSI/ASHRAE/IES Addendum q to ANSI/ASHRAE/IES Standard 90.1-2012, ANSI/ASHRAE/IES Standard 90.1-2015, ANSI/ASHRAE/IES Standard 90.1-2015, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/28/2012 Approved: 1/29/2015 Approved: 6/26/2015 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum m to ANSI/ASHRAE/IES Addendum o to ANSI/ASHRAE/IES Addendum q to ANSI/ASHRAE/IES Standard 90.1-2015, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/29/2015 Approved: 6/28/2018 Approved: 12/7/2018 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum n to ANSI/ASHRAE/IES Addendum p to ANSI/ASHRAE/IES Addendum r to ANSI/ASHRAE/IES Standard 90.1-2012, ANSI/ASHRAE/IES Standard 90.1-2012, ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/28/2012 Approved: 1/26/2012 Approved: 7/31/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum n to ANSI/ASHRAE/IES Addendum p to ANSI/ASHRAE/IES Addendum r to ANSI/ASHRAE/IES Standard 90.1-2015, ANSI/ASHRAE/IES Standard 90.1-2015, ANSI/ASHRAE/IES Standard 90.1-2015, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/26/2015 Approved: 1/29/2015 Approved: 1/29/2015 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum N to ANSI/ASHRAE/IES Addendum P to ANSI/ASHRAE/IES Addendum R to ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/25/2018 Approved: 1/25/2018 Approved: 1/25/2018 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 98 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IES Addendum s to ANSI/ASHRAE/IES Addendum v to ANSI/ASHRAE/IES Addendum z to ANSI/ASHRAE/IES Standard 90.1-2012, ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2015, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/26/2012 Approved: 2/28/2013 Approved: 6/26/2015 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum s to ANSI/ASHRAE/IES Addendum w ANSI/ASHRAE/IES Addendum z to ANSI/ASHRAE/IES Standard 90.1-2015, ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/29/2015 Approved: 1/28/2016 Approved: 10/1/2018 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IES Addendum s to ANSI/ASHRAE/IES Addendum w to ANSI/ASHRAE/IES Standard 100-2015, Energy ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2010, Efficiency in Existing Buildings Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Approved: 2/2/2015 Rise Residential Buildings Rise Residential Buildings Manager of Standards Approved: 12/7/2018 Approved: 7/24/2013 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IES Standard 202-2013, Commissioning Process for Buildings and ANSI/ASHRAE/IES Addendum u ANSI/ASHRAE/IES Addendum x to Systems ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2016, Approved: 7/1/2013 Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Manager of Standards Rise Residential Buildings Rise Residential Buildings Attn: Jim Heldenbrand ASHRAE Approved: 7/26/2016 Approved: 6/28/2018 1791 Tullie Circle, N.E. Manager of Standards Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. ANSI/ASHRAE/IES Standard 90.1dp-2010, Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Energy Standard for Buildings Except Low- Rise Residential Buildings ANSI/ASHRAE/IES Addendum u to ANSI/ASHRAE/IES Addendum y to Approved: 7/24/2010 ANSI/ASHRAE/IES Standard 90.1-2013, ANSI/ASHRAE/IES Standard 90.1-2012, Manager of Standards Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Attn: Jim Heldenbrand ASHRAE Rise Residential Buildings Rise Residential Buildings 1791 Tullie Circle, N.E. Approved: 2/12/2013 Approved: 1/26/2012 Atlanta Ge 30329-5478 Manager of Standards Manager of Standards ANSI/ASHRAE/IES Standard 90.2-2018, Energy- Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Efficient Design of Low-Rise Residential Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Buildings Approved: 12/7/2018 ANSI/ASHRAE/IES Addendum v ANSI/ASHRAE/IES Addendum z to Manager of Standards ANSI/ASHRAE/IES Standard 90.1-2016, ANSI/ASHRAE/IES Standard 90.1-2012, Attn: Jim Heldenbrand ASHRAE Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- 1791 Tullie Circle, N.E. Rise Residential Buildings Rise Residential Buildings Atlanta Ge 30329-5478 Approved: 1/28/2016 Approved: 1/26/2012 ANSI/ASHRAE/IESNA 90.2c-2007, Energy Manager of Standards Manager of Standards Efficient Design of Low-Rise Residential Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Buildings Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Approved: 3/3/2007 Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 99 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IESNA 90.2d-2007, Energy ANSI/ASHRAE/IESNA Addendum 90.1cr-2010, ANSI/ASHRAE/IESNA Addendum 90.1da-2010, Efficient Design of Low-Rise Residential Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Buildings Rise Residential Buildings Rise Residential Buildings Approved: 3/3/2007 Approved: 7/13/2010 Approved: 7/1/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA 90.2e-2007, Energy ANSI/ASHRAE/IESNA Addendum 90.1cs-2010, ANSI/ASHRAE/IESNA Addendum 90.1dc-2010, Efficient Design of Low-Rise Residential Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Buildings Rise Residential Buildings Rise Residential Buildings Approved: 3/3/2007 Approved: 7/1/2010 Approved: 7/23/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA Addendum 90.1cd-2010, ANSI/ASHRAE/IESNA Addendum 90.1ct-2010, ANSI/ASHRAE/IESNA Addendum 90.1dd-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/24/2010 Approved: 7/24/2010 Approved: 8/16/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA Addendum 90.1cn-2010, ANSI/ASHRAE/IESNA Addendum 90.1cv-2010, ANSI/ASHRAE/IESNA Addendum a-2006, Energy Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Standard for Buildings Except Low-Rise Rise Residential Buildings Rise Residential Buildings Residential Buildings Approved: 8/16/2010 Approved: 7/24/2010 Approved: 4/10/2006 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA Addendum 90.1co-2010, ANSI/ASHRAE/IESNA Addendum 90.1cw-2010, ANSI/ASHRAE/IESNA Addendum a-2007, Energy Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Standard for Buildings Except Low-Rise Rise Residential Buildings Rise Residential Buildings Residential Buildings Approved: 7/24/2010 Approved: 7/1/2010 Approved: 7/25/2007 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA Addendum 90.1cp-2010, ANSI/ASHRAE/IESNA Addendum 90.1cy-2010, ANSI/ASHRAE/IESNA Addendum aa-2007, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/23/2010 Approved: 8/17/2010 Approved: 3/3/2007 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA Addendum 90.1cq-2010, ANSI/ASHRAE/IESNA Addendum 90.1cz-2010, ANSI/ASHRAE/IESNA Addendum aa-2009, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 8/16/2010 Approved: 7/1/2010 Approved: 7/22/2009 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 100 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IESNA Addendum ab-2007, ANSI/ASHRAE/IESNA Addendum ad-2012, ANSI/ASHRAE/IESNA Addendum ah-2012, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 3/3/2007 Approved: 6/28/2012 Approved: 6/28/2012 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA Addendum ab-2009, ANSI/ASHRAE/IESNA Addendum ae-2004, ANSI/ASHRAE/IESNA Addendum ai-2009, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/22/2009 Approved: 7/1/2004 Approved: 6/25/2009 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA Addendum ac-2004, ANSI/ASHRAE/IESNA Addendum ae-2007, ANSI/ASHRAE/IESNA Addendum ai-2012, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/1/2004 Approved: 3/27/2007 Approved: 6/28/2012 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA Addendum ac-2007, ANSI/ASHRAE/IESNA Addendum ae-2009, ANSI/ASHRAE/IESNA Addendum aj-2009, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 3/27/2007 Approved: 7/22/2009 Approved: 6/25/2009 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA Addendum ac-2008, ANSI/ASHRAE/IESNA Addendum af-2009, ANSI/ASHRAE/IESNA Addendum ak-2005, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/24/2008 Approved: 1/29/2009 Approved: 8/3/2005 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA Addendum ad-2005, ANSI/ASHRAE/IESNA Addendum ag-2007, ANSI/ASHRAE/IESNA Addendum al-2007, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 3/11/2005 Approved: 3/3/2007 Approved: 3/3/2007 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA Addendum ad-2008, ANSI/ASHRAE/IESNA Addendum ah-2007, ANSI/ASHRAE/IESNA Addendum am-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/24/2008 Approved: 3/3/2007 Approved: 7/23/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 101 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IESNA Addendum an-2009, ANSI/ASHRAE/IESNA Addendum at-2012, ANSI/ASHRAE/IESNA Addendum az-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/29/2009 Approved: 6/28/2012 Approved: 1/28/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA Addendum ao-2009, ANSI/ASHRAE/IESNA Addendum au-2009, ANSI/ASHRAE/IESNA Addendum ba-2009, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/29/2009 Approved: 7/22/2009 Approved: 7/22/2009 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA Addendum ap-2009, ANSI/ASHRAE/IESNA Addendum av-2007, ANSI/ASHRAE/IESNA Addendum bc-2009, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/29/2009 Approved: 3/3/2007 Approved: 6/25/2009 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA Addendum ar-2007, ANSI/ASHRAE/IESNA Addendum av-2010, ANSI/ASHRAE/IESNA Addendum bd-2009, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 3/3/2007 Approved: 2/24/2010 Approved: 6/25/2009 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA Addendum as-2007, ANSI/ASHRAE/IESNA Addendum aw-2008, ANSI/ASHRAE/IESNA Addendum bf-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 12/14/2007 Approved: 6/26/2008 Approved: 7/23/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA Addendum as-2012, ANSI/ASHRAE/IESNA Addendum ax-2010, ANSI/ASHRAE/IESNA Addendum bk-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/28/2012 Approved: 7/23/2010 Approved: 1/28/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA Addendum at-2009, ANSI/ASHRAE/IESNA Addendum ay-2009, ANSI/ASHRAE/IESNA Addendum bl-2010, Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Energy Standard for Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/22/2009 Approved: 6/25/2009 Approved: 1/28/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 102 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IESNA Addendum bo-2010, ANSI/ASHRAE/IESNA Addendum g to ANSI/ASHRAE/IESNA Addendum l-2008, Energy Energy Standard for Buildings Except Low- ANSI/ASHRAE/IESNA 90.1-2007, Energy Standard for Buildings Except Low-Rise Rise Residential Buildings Standard for Buildings Except Low-Rise Residential Buildings Approved: 1/28/2010 Residential Buildings Approved: 7/24/2008 Manager of Standards Approved: 6/26/2008 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IESNA Addendum br-2010, ANSI/ASHRAE/IESNA Addendum m-2008, Energy Standard for Buildings Except Low- ANSI/ASHRAE/IESNA Addendum h-2006, Energy Energy Standard for Buildings Except Low- Rise Residential Buildings Standard for Buildings Except Low-Rise Rise Residential Buildings Approved: 1/28/2010 Residential Buildings Approved: 11/19/2008 Manager of Standards Approved: 4/10/2006 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IESNA Addendum c-2007, Energy ANSI/ASHRAE/IESNA Addendum n-2008, Energy Standard for Buildings Except Low-Rise ANSI/ASHRAE/IESNA Addendum h to Standard for Buildings Except Low-Rise Residential Buildings ANSI/ASHRAE/IESNA 90.1-2007, Energy Residential Buildings Approved: 7/25/2007 Standard for Buildings Except Low-Rise Approved: 6/26/2008 Manager of Standards Residential Buildings Manager of Standards Attn: Jim Heldenbrand ASHRAE Approved: 6/26/2008 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Manager of Standards 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. ANSI/ASHRAE/IESNA Addendum d-2009, Energy Atlanta Ge 30329-5478 ANSI/ASHRAE/IESNA Addendum o-2009, Energy Standard for Buildings Except Low-Rise Standard for Buildings Except Low-Rise Residential Buildings ANSI/ASHRAE/IESNA Addendum i-2006, Energy Residential Buildings Approved: 7/22/2009 Standard for Buildings Except Low-Rise Approved: 7/22/2009 Manager of Standards Residential Buildings Manager of Standards Attn: Jim Heldenbrand ASHRAE Approved: 4/10/2006 Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Manager of Standards 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. ANSI/ASHRAE/IESNA Addendum e-2010, Energy Atlanta Ge 30329-5478 ANSI/ASHRAE/IESNA Addendum p-2006, Energy Standard for Buildings Except Low-Rise Standard for Buildings Except Low-Rise Residential Buildings ANSI/ASHRAE/IESNA Addendum i to Residential Buildings Approved: 1/28/2010 ANSI/ASHRAE/IESNA 90.1-2007, Energy Approved: 4/10/2006 Manager of Standards Standard for Buildings Except Low-Rise Manager of Standards Attn: Jim Heldenbrand ASHRAE Residential Buildings Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Approved: 6/26/2008 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Manager of Standards Atlanta Ge 30329-5478 Attn: Jim Heldenbrand ASHRAE ANSI/ASHRAE/IESNA Addendum f-2006, Energy 1791 Tullie Circle, N.E. ANSI/ASHRAE/IESNA Addendum p to Standard for Buildings Except Low-Rise Atlanta Ge 30329-5478 ANSI/ASHRAE/IESNA 90.1-2007, Energy Residential Buildings Standard for Buildings Except Low-Rise Approved: 4/10/2006 ANSI/ASHRAE/IESNA Addendum j-2008, Energy Residential Buildings Manager of Standards Standard for Buildings Except Low-Rise Approved: 6/26/2008 Attn: Jim Heldenbrand ASHRAE Residential Buildings Manager of Standards 1791 Tullie Circle, N.E. Approved: 7/24/2008 Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 ANSI/ASHRAE/IESNA Addendum g-2006, Energy 1791 Tullie Circle, N.E. Standard for Buildings Except Low-Rise Atlanta Ge 30329-5478 ANSI/ASHRAE/IESNA Addendum q-2008, Energy Residential Buildings Standard for Buildings Except Low-Rise Approved: 4/10/2006 ANSI/ASHRAE/IESNA Addendum k-2008, Energy Residential Buildings Manager of Standards Standard for Buildings Except Low-Rise Approved: 7/24/2008 Attn: Jim Heldenbrand ASHRAE Residential Buildings Manager of Standards 1791 Tullie Circle, N.E. Approved: 7/24/2008 Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 103 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/IESNA Addendum r-2009, Energy ANSI/ASHRAE/IESNA Addendum y-2007, Energy ANSI/ASHRAE/IESNA Standard 90.1bm-2010, Standard for Buildings Except Low-Rise Standard for Buildings Except Low-Rise Energy Standard for Buildings Except Low- Residential Buildings Residential Buildings Rise Residential Buildings Approved: 6/25/2009 Approved: 3/3/2007 Approved: 1/28/2010 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/IESNA Addendum s-2008, Energy ANSI/ASHRAE/IESNA Addendum y to ANSI/ASHRAE/IESNA Standard 90.1bn-2010, Standard for Buildings Except Low=Rise ANSI/ASHRAE/IESNA 90.1-2007, Energy Energy Standard for Buildings Except Low- Residential Buildings Standard for Buildings Except Low-Rise Rise Residential Buildings Approved: 11/19/2008 Residential Buildings Approved: 7/23/2010 Manager of Standards Approved: 6/26/2008 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IESNA Addendum t-2008, Energy ANSI/ASHRAE/IESNA Standard 90.1bp-2010, Standard for Buildings Except Low=Rise ANSI/ASHRAE/IESNA Addendum z-2004, Energy Energy Standard for Buildings Except Low- Residential Buildings Standard for Buildings Except Low-Rise Rise Residential Buildings Approved: 11/19/2008 Residential Buildings Approved: 2/24/2010 Manager of Standards Approved: 7/1/2004 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IESNA Addendum u-2008, Energy ANSI/ASHRAE/IESNA Standard 90.1bq-2010, Standard for Buildings Except Low=Rise ANSI/ASHRAE/IESNA Standard 90.1-2016, Energy Standard for Buildings Except Low- Residential Buildings Energy Standard for Buildings Except Low- Rise Residential Buildings Approved: 11/19/2008 Rise Residential Buildings Approved: 1/28/2010 Manager of Standards Approved: 4/4/2000 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/IESNA Addendum v-2009, Energy ANSI/ASHRAE/NEMA Standard 201-2016, Standard for Buildings Except Low=Rise ANSI/ASHRAE/IESNA Standard 90.1bg-2010, Facility Smart Grid Information Model Residential Buildings Energy Standard for Buildings Except Low- Approved: 5/2/2016 Approved: 1/29/2009 Rise Residential Buildings Manager of Standards Manager of Standards Approved: 1/28/2010 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE/SMACNA Standard 126-2016, ANSI/ASHRAE/IESNA Addendum w-2008, Method of Testing HVAC Air Ducts Energy Standard for Buildings Except ANSI/ASHRAE/IESNA Standard 90.1bh-2010, Approved: 7/1/2016 Low=Rise Residential Buildings Energy Standard for Buildings Except Low- Manager of Standards Approved: 11/19/2008 Rise Residential Buildings Attn: Jim Heldenbrand ASHRAE Manager of Standards Approved: 1/28/2010 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Manager of Standards Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. ANSI/ASHRAE/USGBC/IES 189.1aa-2012, Atlanta Ge 30329-5478 Standard for the Design of High-Performance ANSI/ASHRAE/IESNA Addendum x-2009, Energy Green Buildings Except Low-Rise Residential Standard for Buildings Except Low-Rise ANSI/ASHRAE/IESNA Standard 90.1bj-2010, Buildings Residential Buildings Energy Standard for Buildings Except Low- Approved: 6/28/2012 Approved: 7/22/2009 Rise Residential Buildings Manager of Standards Manager of Standards Approved: 1/28/2010 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 104 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/USGBC/IES 189.1x-2012, ANSI/ASHRAE/USGBC/IES 189.1e-2012, ANSI/ASHRAE/USGBC/IES 189.1j-2016, Standard for the Design of High-Performance Standard for the Design of High-Performance Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 6/28/2012 Approved: 6/28/2012 Approved: 8/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES 189.1a-2012, ANSI/ASHRAE/USGBC/IES 189.1f-2012, ANSI/ASHRAE/USGBC/IES 189.1m-2016, Standard for the Design of High-Performance Standard for the Design of High-Performance Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 6/28/2012 Approved: 6/28/2012 Approved: 8/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES 189.1c-2011, ANSI/ASHRAE/USGBC/IES 189.1f-2016, ANSI/ASHRAE/USGBC/IES 189.1n-2012, Standard for the Design of High-Performance Standard for the Design of High-Performance Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 6/30/2011 Approved: 6/30/2016 Approved: 6/28/2012 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES 189.1d-2011, ANSI/ASHRAE/USGBC/IES 189.1g-2011, ANSI/ASHRAE/USGBC/IES 189.1q-2016, Standard for the Design of High-Performance Standard for the Design of High-Performance Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 6/30/2011 Approved: 11/2/2011 Approved: 8/30/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES 189.1d-2012, ANSI/ASHRAE/USGBC/IES 189.1h-2011, ANSI/ASHRAE/USGBC/IES 189.1t-2012, Standard for the Design of High-Performance Standard for the Design of High-Performance Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 6/28/2012 Approved: 6/30/2011 Approved: 6/28/2012 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES 189.1e-2011, ANSI/ASHRAE/USGBC/IES 189.1j-2011, ANSI/ASHRAE/USGBC/IES 189.1u-2011, Standard for the Design of High-Performance Standard for the Design of High-Performance Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Green Buildings Except Low-Rise Residential Buildings Buildings Buildings Approved: 6/30/2011 Approved: 6/30/2011 Approved: 11/2/2011 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 105 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/USGBC/IES 189.1v-2011, ANSI/ASHRAE/USGBC/IES Addendum 189.1aj ANSI/ASHRAE/USGBC/IES Addendum 189.1as Standard for the Design of High-Performance -2014, Standard for the Design of High- -2014, Standard for the Design of High- Green Buildings Except Low-Rise Residential Performance Green Buildings Except Low- Performance Green Buildings Except Low- Buildings Rise Residential Buildings Rise Residential Buildings Approved: 11/2/2011 Approved: 8/7/2014 Approved: 7/31/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES 189.1w-2011, ANSI/ASHRAE/USGBC/IES Addendum 189.1al ANSI/ASHRAE/USGBC/IES Addendum 189.1at Standard for the Design of High-Performance -2014, Standard for the Design of High- -2014, Standard for the Design of High- Green Buildings Except Low-Rise Residential Performance Green Buildings Except Low- Performance Green Buildings Except Low- Buildings Rise Residential Buildings Rise Residential Buildings Approved: 11/2/2011 Approved: 7/31/2014 Approved: 7/10/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES Addendum 189.1a ANSI/ASHRAE/USGBC/IES Addendum 189.1an ANSI/ASHRAE/USGBC/IES Addendum 189.1au -2016, Standard for the Design of High- -2014, Standard for the Design of High- -2014, Standard for the Design of High- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/28/2016 Approved: 7/10/2013 Approved: 7/10/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES Addendum 189.1ab ANSI/ASHRAE/USGBC/IES Addendum 189.1ao ANSI/ASHRAE/USGBC/IES Addendum 189.1av -2012, Standard for the Design of High- -2014, Standard for the Design of High- -2014, Standard for the Design of High- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/26/2012 Approved: 7/10/2014 Approved: 7/10/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES Addendum 189.1ac ANSI/ASHRAE/USGBC/IES Addendum 189.1ap ANSI/ASHRAE/USGBC/IES Addendum 189.1aw -2012, Standard for the Design of High- -2014, Standard for the Design of High- -2014, Standard for the Design of High- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 1/26/2012 Approved: 7/10/2014 Approved: 7/10/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES Addendum 189.1ae ANSI/ASHRAE/USGBC/IES Addendum 189.1aq ANSI/ASHRAE/USGBC/IES Addendum 189.1ax -2014, Standard for the Design of High- -2014, Standard for the Design of High- -2014, Standard for the Design of High- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/10/2014 Approved: 8/7/2014 Approved: 8/7/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 106 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/USGBC/IES Addendum 189.1ay ANSI/ASHRAE/USGBC/IES Addendum 189.1bf ANSI/ASHRAE/USGBC/IES Addendum 189.1bn -2014, Standard for the Design of High- -2014, Standard for the Design of High- -2014, Standard for the Design of High- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 8/26/2014 Approved: 7/10/2014 Approved: 7/10/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES Addendum 189.1b ANSI/ASHRAE/USGBC/IES Addendum 189.1bh ANSI/ASHRAE/USGBC/IES Addendum 189.1bo -2010, Standard for the Design of High- -2014, Standard for the Design of High- -2014, Standard for the Design of High- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/1/2010 Approved: 7/10/2014 Approved: 7/10/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES Addendum 189.1b ANSI/ASHRAE/USGBC/IES Addendum 189.1bi ANSI/ASHRAE/USGBC/IES Addendum 189.1bp -2015, Standard for the Design of High- -2014, Standard for the Design of High- -2014, Standard for the Design of High- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/2/2015 Approved: 7/10/2014 Approved: 7/10/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES Addendum 189.1bb ANSI/ASHRAE/USGBC/IES Addendum 189.1bj ANSI/ASHRAE/USGBC/IES Addendum 189.1bq -2014, Standard for the Design of High- -2014, Standard for the Design of High- -2014, Standard for the Design of High- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/10/2014 Approved: 7/10/2014 Approved: 7/10/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES Addendum 189.1bc ANSI/ASHRAE/USGBC/IES Addendum 189.1bk ANSI/ASHRAE/USGBC/IES Addendum 189.1br -2014, Standard for the Design of High- -2014, Standard for the Design of High- -2014, Standard for the Design of High- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/10/2014 Approved: 7/10/2014 Approved: 7/10/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES Addendum 189.1bd ANSI/ASHRAE/USGBC/IES Addendum 189.1bm ANSI/ASHRAE/USGBC/IES Addendum 189.1bs -2014, Standard for the Design of High- -2014, Standard for the Design of High- -2014, Standard for the Design of High- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/10/2014 Approved: 7/10/2014 Approved: 7/10/2014 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 107 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/USGBC/IES Addendum 189.1bt ANSI/ASHRAE/USGBC/IES Addendum 189.1bz ANSI/ASHRAE/USGBC/IES Addendum 189.1e -2014, Standard for the Design of High- -2014, Standard for the Design of High- -2016, Standard for the Design of High- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/10/2014 Approved: 7/10/2014 Approved: 1/28/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES Addendum 189.1bu ANSI/ASHRAE/USGBC/IES Addendum 189.1c ANSI/ASHRAE/USGBC/IES Addendum 189.1f -2014, Standard for the Design of High- -2012, Standard for the Design of High- -2011, Standard for the Design of High- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/10/2014 Approved: 6/28/2012 Approved: 7/27/2011 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES Addendum 189.1bv ANSI/ASHRAE/USGBC/IES Addendum 189.1cb ANSI/ASHRAE/USGBC/IES Addendum 189.1g -2014, Standard for the Design of High- -2014, Standard for the Design of High- -2016, Standard for the Design of High- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 8/7/2014 Approved: 7/10/2014 Approved: 1/28/2016 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES Addendum 189.1bw ANSI/ASHRAE/USGBC/IES Addendum 189.1cd ANSI/ASHRAE/USGBC/IES Addendum 189.1h -2014, Standard for the Design of High- -2014, Standard for the Design of High- -2013, Standard for the Design of High- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/10/2014 Approved: 8/7/2014 Approved: 1/30/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES Addendum 189.1bx ANSI/ASHRAE/USGBC/IES Addendum 189.1ce ANSI/ASHRAE/USGBC/IES Addendum 189.1i -2014, Standard for the Design of High- -2015, Standard for the Design of High- -2011, Standard for the Design of High- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 8/26/2014 Approved: 7/28/2015 Approved: 11/2/2011 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES Addendum 189.1by ANSI/ASHRAE/USGBC/IES Addendum 189.1d ANSI/ASHRAE/USGBC/IES Addendum 189.1j -2015, Standard for the Design of High- -2016, Standard for the Design of High- -2013, Standard for the Design of High- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 7/2/2015 Approved: 1/28/2016 Approved: 2/28/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 108 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/USGBC/IES Addendum 189.1k ANSI/ASHRAE/USGBC/IES Addendum 189.1o ANSI/ASHRAE/USGBC/IES Addendum 189.1r -2011, Standard for the Design of High- -2011, Standard for the Design of High- -2013, Standard for the Design of High- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 6/30/2011 Approved: 6/30/2011 Approved: 7/1/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES Addendum 189.1k ANSI/ASHRAE/USGBC/IES Addendum 189.1o ANSI/ASHRAE/USGBC/IES Addendum 189.1s -2013, Standard for the Design of High- -2014, Standard for the Design of High- -2013, Standard for the Design of High- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Performance Green Buildings Except Low- Rise Residential Buildings Rise Residential Buildings Rise Residential Buildings Approved: 2/28/2013 Approved: 1/23/2014 Approved: 1/30/2013 Manager of Standards Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

ANSI/ASHRAE/USGBC/IES Addendum 189.1l ANSI/ASHRAE/USGBC/IES Addendum 189.1p ANSI/ASHRAE/USGBC/IES Addendum 189.1v -2011, Standard for the Design of High- -2011, Standard for the Design of High- -2014, Standard for the Design of High- Performance Green Buildingss Performance Green Buildings Except Low- Performance Green Buildings Except Low- Approved: 7/27/2011 Rise Residential Buildings Rise Residential Buildings Manager of Standards Approved: 11/2/2011 Approved: 7/31/2014 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/USGBC/IES Addendum 189.1l -2013, Standard for the Design of High- ANSI/ASHRAE/USGBC/IES Addendum 189.1q ANSI/ASHRAE/USGBC/IES Addendum 189.1w Performance Green Buildings Except Low- -2011, Standard for the Design of High- -2014, Standard for the Design of High- Rise Residential Buildings Performance Green Buildings Except Low- Performance Green Buildings Except Low- Approved: 1/30/2013 Rise Residential Buildings Rise Residential Buildings Manager of Standards Approved: 11/2/2011 Approved: 7/10/2014 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/USGBC/IES Addendum 189.1m -2011, Standard for the Design of High- ANSI/ASHRAE/USGBC/IES Addendum 189.1q ANSI/ASHRAE/USGBC/IES Addendum 189.1z Performance Green Buildings Except Low- -2013, Standard for the Design of High- -2013, Standard for the Design of High- Rise Residential Buildings Performance Green Buildings Except Low- Performance Green Buildings Except Low- Approved: 11/2/2011 Rise Residential Buildings Rise Residential Buildings Manager of Standards Approved: 1/30/2013 Approved: 7/1/2013 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAE/USGBC/IES Addendum 189.1m -2014, Standard for the Design of High- ANSI/ASHRAE/USGBC/IES Addendum 189.1r ANSI/ASHRAE/USGBC/IES Addendum ad to Performance Green Buildings Except Low- -2011, Standard for the Design of High- Standard 189.1-2014, Standard for the Rise Residential Buildings Performance Green Buildings Except Low- Design of High-Performance Green Buildings Approved: 1/23/2014 Rise Residential Buildings Except Low-Rise Residential Buildings Manager of Standards Approved: 11/2/2011 Approved: 7/10/2014 Attn: Jim Heldenbrand ASHRAE Manager of Standards Manager of Standards 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 109 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASHRAE/USGBC/IES Addendum af to ANSI/ASHRAE/USGBC/IES Addendum189.1a ANSI/ASRHAE/ICC/USGBC/IES Addendum x to Standard 189.1-2014, Standard for the -2010, Standard for the Design of High- ANSI/ASRHAE/ICC/USGBC/IES Standard 189.1 Design of High-Performance Green Buildings Performance Green Buildings Except Low- -2019, Standard for the Design of High- Except Low-Rise Residential Buildings Rise Residential Buildings Performance Green Buildings Except Low- Approved: 1/23/2014 Approved: 7/1/2010 Rise Residential Buildings Manager of Standards Manager of Standards Approved: 8/26/2019 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE/USGBC/IES Addendum ag to ANSI/ASHRAE/USGBC/IES Standard 189.1-2017, Standard 189.1-2014, Standard for the Standard for High-Performance Green ANSI/ASRHAE/USGBC/IES/ICC Addendum Design of High-Performance Green Buildings Buildings Except Low-Rise Residential 189.1e-2019, Standard for the Design of Except Low-Rise Residential Buildings Buildings High-Performance Green Buildings Except Approved: 1/23/2014 Approved: 1/22/2010 Low-Rise Residential Buildings Manager of Standards Manager of Standards Approved: 6/27/2019 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE/USGBC/IES Addendum ah to ANSI/ASHRAE/USGBC/IES/ICC Addendum Standard 189.1-2014, Standard for the 189.1c-2019, Standard for the Design of High- ANSI/ASRHAE/USGBC/IES/ICC Addendum Design of High-Performance Green Buildings Performance Green Buildings Except Low- 189.1g-2019, Standard for the Design of Except Low-Rise Residential Buildings Rise Residential Buildings High-Performance Green Buildings Except Approved: 1/23/2014 Approved: 6/27/2019 Low-Rise Residential Buildings Manager of Standards Manager of Standards Approved: 6/27/2019 Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE Manager of Standards 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 ANSI/ASHRAE/USGBC/IES Addendum b to ANSI/ASHRAE/USGBC/IES/ICC Addendum ANSI/ASHRAE/USGBC/IES Standard 189.1 189.1d-2019, Standard for the Design of ANSI/ASRHAE/USGBC/IES/ICC Addendum -2011, Standard for the Design of High- High-Performance Green Buildings Except 189.1h-2019, Standard for the Design of Performance Green Buildings Except Low- Low-Rise Residential Buildings High-Performance Green Buildings Except Rise Residential Buildings Approved: 6/27/2019 Low-Rise Residential Buildings Approved: 7/24/2013 Manager of Standards Approved: 6/27/2019 Manager of Standards Attn: Jim Heldenbrand ASHRAE Manager of Standards Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 ANSI/ASHRAEd 34F-2017, Designation and ANSI/ASHRAE/USGBC/IES Addendum u to Safety Classification of Refrigerants ANSI/ASRHAE/USGBC/IES/ICC Addendum 189.1i ANSI/ASHRAE/USGBC/IES Standard 189.1 Approved: 10/10/2017 -2019, Standard for the Design of High- -2011, Standard for the Design of High- Manager of Standards Performance Green Buildings Except Low- Performance Green Buildings Except Low- Attn: Jim Heldenbrand ASHRAE Rise Residential Buildings Rise Residential Buildings 1791 Tullie Circle, N.E. Approved: 7/24/2019 Approved: 7/24/2013 Atlanta Ge 30329-5478 Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE ANSI/ASRHAE/ICC/USGBC/IES 189.1f-2019, Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Standard for the Design of High-Performance Atlanta Ge 30329-5478 Atlanta Ge 30329-5478 Green Buildings Except Low-Rise Residential Buildings ANSI/ASRHAE/USGBC/IES/ICC Addendum 189.1l ANSI/ASHRAE/USGBC/IES Addendum y to Approved: 6/27/2019 -2019, Standard for the Design of High- Standard 189.1-2013, Standard for the Manager of Standards Performance Green Buildings Except Low- Design of High-Performance Green Buildings Attn: Jim Heldenbrand ASHRAE Rise Residential Buildings Except Low-Rise Residential Buildings 1791 Tullie Circle, N.E. Approved: 6/27/2019 Approved: 2/28/2013 Atlanta Ge 30329-5478 Manager of Standards Manager of Standards Attn: Jim Heldenbrand ASHRAE Attn: Jim Heldenbrand ASHRAE 1791 Tullie Circle, N.E. 1791 Tullie Circle, N.E. Atlanta Ge 30329-5478 Atlanta Ge 30329-5478

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 110 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASRHAE/USGBC/IES/ICC Addendum v to ASME (AMERICAN SOCIETY OF ASME A112.18.6/CSA B125.6-2017, Flexible ANSI/ASRHAE/USGBC/IES/ICC Standard 189.1 MECHANICAL ENGINEERS) Water Connectors -2019, Standard for the Design of High- Approved: 6/19/2017 Performance Green Buildings Except Low- ANSI/API 579-1/ASME FFS-1-2016, Fitness-for- Silvana Rodriguez-Bhatti Rise Residential Buildings Service Approved: 7/1/2019 Approved: 4/19/2016 ASME A112.18.8-2009 (2014), In-Line Sanitary Manager of Standards Silvana Rodriguez-Bhatti Waste Valves for Plumbing Drainage Systems Attn: Jim Heldenbrand ASHRAE Approved: 7/10/2014 1791 Tullie Circle, N.E. ANSI/API 579-2I/ASME FFS-2-2009, Fitness-For- Silvana Rodriguez-Bhatti Atlanta Ge 30329-5478 Service Example Problem Manual Approved: 8/11/2009 ASME A112.18.9-2011 (R2017), ASIS (ASIS INTERNATIONAL) Silvana Rodriguez-Bhatti Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures ANSI/ASIS CSO.1-2013, Chief Security Officer ASME B17.1-1967 (R2017), Keys and Keyseats (CSO) - An Organizational Model Approved: 2/24/2017 Approved: 10/5/2017 Approved: 11/8/2013 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Sue Cook, (708) 579-8210, [email protected] ASME A112.19.1/CSA B45.2-2018, Enamelled ASME A112.1.2-2012 (R2017), Air Gaps in Cast Iron and Enamelled Steel Plumbing ANSI/ASIS INV.1-2015, Investigations Plumbing Systems (for Plumbing Fixtures and Fixtures Approved: 7/28/2015 Water-Connected Receptors) Approved: 6/22/2018 Sue Cook, (708) 579-8210, [email protected] Approved: 5/4/2017 Silvana Rodriguez-Bhatti ANSI/ASIS ORM.1-2017, Security and Resilience Silvana Rodriguez-Bhatti ASME A112.19.10-2017, Retro Dual Flush in Organizations and Their Supply Chains - ASME A112.1.3-2000 (R2015), Air Gap Fittings Devices for Water Closets Requirements with Guidance for Use With Plumbing Fixtures, Appliances, Approved: 6/19/2017 Approved: 3/20/2017 and Appurtenances Silvana Rodriguez-Bhatti Sue Cook, (708) 579-8210, [email protected] Approved: 3/13/2015 ASME A112.19.12-2014 (R2019), Wall Mounted, ANSI ASIS PSC.1-2012 (R2017), Management Silvana Rodriguez-Bhatti Pedestal Mounted, Adjustable, Elevating, System for Quality of Private Security ASME A112.14.1-2003 (R2017), Backwater Tilting, and Pivoting Lavatory, Sink, and Company Operations - Requirements with Valves Shampoo Bowl Carrier Systems and Drain Guidance Approved: 5/4/2017 Waste Systems Approved: 9/1/2017 Silvana Rodriguez-Bhatti Approved: 2/27/2019 Sue Cook, (708) 579-8210, [email protected] Silvana Rodriguez-Bhatti ASME A112.14.3-2018, Hydromechanical ANSI/ASIS PSC.2-2019, Conformity Assessment Grease Interceptors ASME A112.19.14-2013 (R2018), Six-Liter Water and Auditing Management Systems for Approved: 1/10/2018 Closets Equipped with a Dual Flushing Device Quality of Private Security Company Operations Silvana Rodriguez-Bhatti Approved: 5/8/2018 Silvana Rodriguez-Bhatti Approved: 5/23/2019 ASME A112.14.4-2001 (R2017), Grease Removal Sue Cook, (708) 579-8210, [email protected] Devices ASME A112.19.15-2012 (R2017), Approved: 5/4/2017 Bathtubs/Whirlpool Bathtubs with Pressure ANSI ASIS PSC.3-2013, Maturity Model for the Sealed Doors Phased Implementation of a Quality Silvana Rodriguez-Bhatti Assurance Management System for Private Approved: 5/4/2017 ASME A112.14.6-2010 (R2015), FOG (Fats, Oils Security Service Providers Silvana Rodriguez-Bhatti & Greases) Disposal Systems Approved: 1/29/2013 Approved: 3/13/2015 ASME A112.19.17-2010 (R2018), Manufactured Sue Cook, (708) 579-8210, [email protected] Silvana Rodriguez-Bhatti Safety Vacuum Release Systems (SVRS) For Residential and Commercial Swimming Pool, ANSI/ASIS SCRM.1-2014, Supply Chain Risk ASME A112.18.1-2012/CSA B125.1-2018, Spa, Hot Tub and Wading Pool Suction Management: A Compilation of Best Plumbing Supply Fittings Systems Practices Approved: 6/22/2018 Approved: 5/8/2018 Approved: 3/28/2014 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Sue Cook, (708) 579-8210, [email protected] ASME A112.18.2/CSA B125.2-2015, Plumbing ASME A112.19.19-2016, Vitreous China ANSI ASIS/SHRM WVPI.1-2011, Workplace Waste Fittings Nonwater Urinals Violence Prevention and Intervention (Joint Approved: 6/19/2015 ASIS International and Society for Human Approved: 8/31/2016 Resource Management (SHRM) Standard) Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 9/2/2011 ASME A112.18.3-2002 (R2017), Performance ASME A112.19.2/CSA B45.1-2018, Ceramic Sue Cook, (708) 579-8210, [email protected] Requirements for Backflow Protection Plumbing Fixtures Devices and Systems in Plumbing Fixture Approved: 6/15/2018 Fittings Silvana Rodriguez-Bhatti Approved: 5/4/2017 Silvana Rodriguez-Bhatti

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 111 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASME A112.19.3-2017/CSA B45.4-2017, ASME A112.6.1M-1997 (R2017), Floor-Affixed ASME A17.6-2017, Standard for Elevator Stainless Steel Plumbing Fixtures Supports for Off-the-Floor Plumbing Fixtures Suspension, Compensation and Governor Approved: 3/10/2017 for Public Use Systems Silvana Rodriguez-Bhatti Approved: 5/4/2017 Approved: 9/29/2017 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME A112.19.5-2017/CSA B45.15-2017, Flush Valves and Spuds for Water Closets, Urinals, ASME A112.6.2-2017, Framing Affixed Supports ASME A17.7/CSA B44.7-2006 (R2012), and Tanks (Carriers) for Off-the-Floor Plumbing Fixtures Performance Based Safety Code for Elevators Approved: 5/23/2017 Approved: 11/1/2017 and Escalators Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 7/17/2012 Silvana Rodriguez-Bhatti ASME A112.19.7/CSA B45.10-2012 (2017), ASME A112.6.3-2016, Floor and Trench Drains Hydromassage Bathtub Appliances Approved: 1/26/2016 ASME A17.8-2016/CSA B44.8-2016, Standard Approved: 2/23/2017 Silvana Rodriguez-Bhatti for Wind Turbine Elevators Silvana Rodriguez-Bhatti Approved: 1/8/2016 ASME A112.6.3-2019, Floor and Trench Drains Silvana Rodriguez-Bhatti ASME A112.21.3M-1985 (R2017), Hydrants for Approved: 1/31/2019 Utility and Maintenance Use Silvana Rodriguez-Bhatti ASME A18.1 2017, Safety Standard for Platform Approved: 5/4/2017 Lifts and Stairway Chairlifts Silvana Rodriguez-Bhatti ASME A112.6.4-2003 (R2012), Roof, Deck, and Approved: 8/3/2017 Balcony Drains Silvana Rodriguez-Bhatti ASME A112.3.1-2007 (R2017), Stainless Steel Approved: 12/17/2012 Drainage Systems for Sanitary DWV, Storm, Silvana Rodriguez-Bhatti ASME A90.1-2015, Safety Standard for Belt and Vacuum Applications, Above and Below Manlifts Ground ASME A112.6.7-2010 (R2015), Sanitary Floor Approved: 1/13/2015 Approved: 5/4/2017 Sinks Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 3/13/2015 Silvana Rodriguez-Bhatti ASME AED-1-2018, Aerospace and Advanced ASME A112.3.4-2013 /CSA B45.9-2018, Engineering Drawings Macerating Toilet Systems and Wastr- ASME A112.6.9-2005 (R2015), Siphonic Roof Approved: 9/25/2018 Plumbing Systems for Plumbing Fixtures Drains Silvana Rodriguez-Bhatti Approved: 5/31/2018 Silvana Rodriguez-Bhatti Approved: 3/13/2015 ASME AG-1-2017, Code on Nuclear Air and Gas Silvana Rodriguez-Bhatti Treatment ASME A112.36.2M-2008 (R2017), Cleanouts Approved: 5/22/2017 Approved: 5/4/2017 ASME A120.1-2014, Safety Requirements for Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Powered Platforms and Traveling Ladders and Gantries for Building Maintenance ASME AG-1-2019, Code on Nuclear Air and Gas ASME A112.4.1-2014 (R2019, Water Heater Approved: 3/4/2014 Treatment Relief Valve Drain Tubes Silvana Rodriguez-Bhatti Approved: 8/8/2019 Approved: 2/27/2019 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME A13.1-2015, Scheme for the Identification of Piping Systems ASME ANDE-1-2015, ASME Nondestructive ASME A112.4.14/CSA B125.14-2017, Manually Approved: 10/30/2015 Examination and Quality Control Central Operated Valves for Use in Plumbing Systems Silvana Rodriguez-Bhatti Qualification and Certification Program Approved: 6/1/2017 Approved: 4/22/2015 Silvana Rodriguez-Bhatti ASME A17.1/CSA B44-2016, Safety Code for Silvana Rodriguez-Bhatti Elevators and Escalators ASME A112.4.2/CSA B45.16-2015, Water Closet Approved: 7/25/2016 ASME B1.1-2019, Unified Inch Screw Threads Personal Hygiene Devices Silvana Rodriguez-Bhatti (UN and UNR Thread Form) Approved: 6/19/2015 Approved: 8/26/2019 Silvana Rodriguez-Bhatti ASME A17.2-2017, Guide for Inspection of Silvana Rodriguez-Bhatti Elevators, Escalators, and Moving Walks ASME A112.4.3-1999 (R2015), Plastic Fittings Approved: 10/25/2017 ASME B1.10M-2004 (R2019), Unified Miniature for Connecting Water Closets to the Sanitary Silvana Rodriguez-Bhatti Screw Threads Drainage System Approved: 5/23/2019 Approved: 3/13/2015 ASME A17.3-2017, Safety Code for Existing Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Elevators and Escalators Approved: 12/12/2017 ASME B1.11-1958 (R2016), Microscopic ASME A112.4.4-2017, Plastic Push-Fit Drain, Silvana Rodriguez-Bhatti Objective Thread Waste and Vent (DWV) Fittings Approved: 6/9/2016 Approved: 5/25/2017 ASME A17.4-2015, Guide for Emergency Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Personnel Approved: 1/8/2015 Silvana Rodriguez-Bhatti

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 112 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASME B1.12-1987 (R2018), Class 5 Interference ASME B1.30-2002 (R2017), Screw Threads: ASME B107.56-2018, Body Repair Tools - Fit Thread Standard Practice for Calculating and Approved: 7/20/2018 Approved: 6/15/2018 Rounding Dimensions Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 3/28/2017 Silvana Rodriguez-Bhatti ASME B107.600-2016, Screwdrivers and ASME B1.13M-2005 (R2015), Metric Screw Screwdriver Bits Threads: M Profile ASME B1.5-1997 (R2014), Acme Screw Threads Approved: 6/29/2016 Approved: 5/21/2015 Approved: 6/2/2014 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B133.8-2011 (R2017), Gas Tubine ASME B1.16M-1984 (R2016) , Gages and Gaging ASME B1.7-2006 (R2016), Nomenclature, Installation Sound Emissions for Metric M Screw Threads Definitions, and Letter Symbols for Screw Approved: 1/3/2017 Approved: 6/17/2016 Threads Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 6/9/2016 Silvana Rodriguez-Bhatti ASME B16.1-2015, Gray Iron Pipe Flanges and ASME B1.2-1983 (R2017), Gages and Gaging for Flanged Fittings Unified Inch Screw Threads ASME B1.8-1988 (R2016), Stub Acme Screw Approved: 7/29/2015 Approved: 4/25/2017 Threads Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 6/9/2016 Silvana Rodriguez-Bhatti ASME B16.10-2017 , Face-to-Face and End-to- ASME B1.20.1-2013 (R2018), Pipe Threads, End Dimensions of Valves General Purpose (Inch) ASME B1.9-1973 (R2017), Buttress Inch Screw Approved: 4/25/2017 Approved: 12/7/2018 Threads (7 deg./45 deg. Form with 0.6 Pitch Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Basic Height of Thread Engagement) Approved: 4/18/2017 ASME B16.11-2016 , Forged Fittings, Socket- ASME B1.20.3-1976 (R2018), Dryseal Pipe Silvana Rodriguez-Bhatti Welding and Threaded Threads (Inch) Approved: 10/21/2016 Approved: 9/6/2018 ASME B107.100-2010, Flat Wrenches Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 3/11/2010 Silvana Rodriguez-Bhatti ASME B16.12-2009 (R2014), Cast Iron Threaded ASME B1.20.5-1991 (R2019), Gaging for Dryseal Drainage Fittings Pipe Threads (Inch) ASME B107.110-2019, Socket Wrenches, Approved: 8/15/2014 Approved: 6/18/2019 Handles, and Attachments Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 8/29/2019 Silvana Rodriguez-Bhatti ASME B16.12-2019 , Cast Iron Threaded ASME B1.20.7-1991 (R2018), Hose Coupling Drainage Fittings Screw Threads (Inch) ASME B107.17-2015, Gages and Mandrels for Approved: 7/29/2019 Approved: 6/15/2018 Wrench Openings Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 6/19/2015 Silvana Rodriguez-Bhatti ASME B16.14-2018, Ferrous Pipe Plugs, ASME B1.21M-1997 (R2018), Metric Screw Bushings, and Locknuts with Pipe Threads Threads MJ Profile ASME B107.300-2010 (R2016), Torque Approved: 8/3/2018 Approved: 6/15/2018 Instruments Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 3/9/2016 Silvana Rodriguez-Bhatti ASME B16.15-2018, Cast Copper Alloy Threaded ASME B1.22M-1985 (R2016) , Gages and Fittings: Classes 125 and 250 Gaging for MJ Series Metric Screw Threads ASME B107.4-2019, Driving and Spindle Ends Approved: 8/3/2018 Approved: 6/17/2016 for Portable Hand, Impact, Air, and Electric Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Tools (Percussion Tools Excluded) Approved: 4/23/2019 ASME B16.18-2018, Cast Copper Alloy Solder ASME B1.25-2019, Measurement Uncertainty Silvana Rodriguez-Bhatti Joint Pressure Fittings Factors in the Calibration of Screw Thread Approved: 2/16/2018 Gages ASME B107.400-2018, Striking Tools Silvana Rodriguez-Bhatti Approved: 3/15/2019 Approved: 9/20/2018 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B16.20-2017, Metallic Gaskets for Pipe Flanges ASME B1.3-2007 (R2017), Screw Thread Gaging ASME B107.410-2018, Struck Tools Approved: 10/11/2017 Systems for Acceptability: Inch and Metric Approved: 11/9/2018 Silvana Rodriguez-Bhatti Screw Threads (UN, UNR, UNJ, M, and MJ) Silvana Rodriguez-Bhatti Approved: 3/28/2017 ASME B16.21-2016 , Nonmetallic Flat Gaskets Silvana Rodriguez-Bhatti ASME B107.500-2010, Pliers for Pipe Flanges Approved: 6/14/2010 Approved: 10/11/2016 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 113 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASME B16.22-2018, Wrought Copper and ASME B16.4-2016, Gray Iron Threaded Fittings ASME B17.2-1967 (R2017), Woodruff Keys and Copper Alloy Solder Joint Pressure Fittings Classes 125 and 250 Keyseats Approved: 8/3/2018 Approved: 9/23/2016 Approved: 10/5/2017 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti

ASME B16.23-2016, Cast Copper Alloy Solder ASME B16.40-2019, Manually Operated ASME B18.1.1-1972 (R2016), Small Solid Rivets Joint Drainage Fittings: DWV Thermoplastic Gas Shutoffs and Valves in Gas Approved: 8/11/2016 Approved: 10/21/2016 Distribution Systems Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 1/15/2019 Silvana Rodriguez-Bhatti ASME B18.1.2-1972 (R2016) , Large Rivets ASME B16.24-2016, Cast Copper Alloy Pipe Approved: 8/11/2016 Flanges, Flanged Fittings, and Valves: Classes ASME B16.42-2016, Ductile Iron Pipe Flanges Silvana Rodriguez-Bhatti 150, 300, 600, 900, 1500, and 2500 and Flanged Fittings Classes 150 and 300 Approved: 9/23/2016 Approved: 11/7/2016 ASME B18.1.3M-1983 (R2016) , Metric Small Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Solid Rivets Approved: 8/11/2016 ASME B16.25-2017, Buttwelding Ends ASME B16.44-2012 (R2017), Manually Operated Silvana Rodriguez-Bhatti Approved: 9/7/2017 Metallic Gas Valves for Use in Aboveground Silvana Rodriguez-Bhatti Piping System ASME B18.10-2006 (R2016) , Track Bolts and Approved: 11/17/2017 Nuts ASME B16.26-2018, Cast Copper Alloy Fittings Silvana Rodriguez-Bhatti Approved: 8/11/2016 for Flared Copper Tubes Silvana Rodriguez-Bhatti Approved: 8/3/2018 ASME B16.47-2017 , Large Diameter Steel Silvana Rodriguez-Bhatti Flanges ASME B18.11-1961 (R2017), Miniature Screws Approved: 3/6/2017 Approved: 3/21/2017 ASME B16.29-2017, Wrought Copper and Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Wrought Copper Alloy Solder Joint Drainage Fittings - DWV ASME B16.48-2015, Line Blanks ASME B18.12-2012, Glossary of Terms for Approved: 9/7/2017 Approved: 9/18/2015 Mechanical Fasteners Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 1/9/2012 Silvana Rodriguez-Bhatti ASME B16.3-2016, Malleable Iron Threaded ASME B16.49-2017, Factory-Made Wrought Fittings - Classes 150 and 300 Steel Buttwelding Induction Bends for ASME B18.13-2017, Screw And Washer Approved: 9/26/2016 Transportation and Distribution Systems Assemblies - Sems (Inch Series) Silvana Rodriguez-Bhatti Approved: 9/7/2017 Approved: 1/3/2017 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B16.33-2012 (R2017), Manually Operated Metallic Gas Valves for Use in Gas Piping ASME B16.5-2017, Pipe Flanges and Flanged ASME B18.13.1M-2011 (R2016), Screw and Systems up to 125 PSI (sizes NPS 1/2 through Fittings NPS 1/2 Through NPS 24 Metric/Inch Washer Assemblies: Sems (Metric Series) NPS 2) Standard Approved: 11/16/2016 Approved: 11/17/2017 Approved: 2/14/2017 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B18.15-2015, Forged Eyebolts ASME B16.34-2017 , Valves - Flanged, ASME B16.50-2018, Wrought Copper and Approved: 6/1/2015 Threaded, and Welding End Copper Alloy Braze-Joint Pressure Fittings Silvana Rodriguez-Bhatti Approved: 3/9/2017 Approved: 7/27/2018 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B18.16.4-2008 (R2017), Serrated Hex Flange Locknuts 90,000 PSI (Inch Series) ASME B16.36-2015, Orifice Flanges ASME B16.51-2018, Copper and Copper Alloy Approved: 10/5/2017 Approved: 2/24/2015 Press-Connect Pressure Fittings Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 9/6/2018 Silvana Rodriguez-Bhatti ASME B18.16.6-2017, Prevailing Torque ASME B16.38-2012 (R2017), Large Metallic Locknuts (Inch Series) Valves for Gas Distribution (Manually ASME B16.52-2018, Forged Nonferrous Fittings, Approved: 6/1/2017 Operated, NPS - 2 1/2, 125 psig aximum) Socket-Welding and Threaded Silvana Rodriguez-Bhatti Approved: 11/17/2017 (Titanium, Titanium Alloys, Aluminum, and Silvana Rodriguez-Bhatti Aluminum Alloys) ASME B18.16M-2004 (R2016), Prevailing- Approved: 3/29/2018 Torque Type Steel Metric Hex Nuts and Hex ASME B16.39-2014, Malleable Iron Threaded Silvana Rodriguez-Bhatti Flange Nuts Pipe Unions Approved: 11/16/2016 Approved: 6/24/2014 ASME B16.9-2018, Factory-Made Wrought Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Buttwelding Fittings Approved: 9/25/2018 Silvana Rodriguez-Bhatti

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 114 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASME B18.18-2017, Quality Assurance for ASME B18.21.1-2009 (R2016), Washers: Helical ASME B18.31.3-2014, Threaded Rod (Inch Fasteners Spring-Lock, Tooth Lock, and Plain Washers Series) Approved: 4/6/2017 Approved: 11/16/2016 Approved: 11/10/2014 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti

ASME B18.2.1-2012, Square and Hex Bolts and ASME B18.21.2M-1999 (R2014), Lock Washers ASME B18.31.4M-2009 (R2017), Threaded Rod Screws - Inch (Metric Series) (Metric Series) Approved: 12/22/2012 Approved: 1/27/2014 Approved: 2/14/2017 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti

ASME B18.2.2-2015, Nuts for General ASME B18.21.3-2008 (R2017), Double Coil ASME B18.31.5-2011 (R2016) , Bent Bolts (Inch Applications: Machine Screw Nuts, Hex, Helical Spring Lock Washers for Wood Series) Square, Hex Flange, and Coupling Nuts (Inch Structures Approved: 11/16/2016 Series) Approved: 10/5/2017 Silvana Rodriguez-Bhatti Approved: 8/12/2015 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B18.5-2012 (R2017), Round Head Bolts ASME B18.22M-1981 (R2017), Metric Plain (Inch Series) ASME B18.2.3.3M-2007 (R2014), Metric Heavy Washers Approved: 7/21/2017 Hex Screws Approved: 3/21/2017 Silvana Rodriguez-Bhatti Approved: 12/11/2014 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B18.6.1-1981 (R2016), Wood Screws ASME B18.24-2015, Part Identifying Number (Inch Series) ASME B18.2.3.5M-1979 (R2016) , Metric Hex (PIN) Code System Standard for B18 Fastener Approved: 10/11/2016 Bolts Products Silvana Rodriguez-Bhatti Approved: 11/16/2016 Approved: 6/1/2015 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B18.6.2-1998 (R2010), Slotted Head Cap Screws, Square Head Set Screws And Slotted ASME B18.2.3.9M-2001 (R2014), Metric Heavy ASME B18.27-1998 (R2017), Tapered and Headless Set Screws Hex Flange Screws Reduced Cross Section Retaining Rings (Inch Approved: 7/26/2010 Approved: 1/27/2014 Series) Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 3/21/2017 Silvana Rodriguez-Bhatti ASME B18.6.3-2013 (R2017), Machine Screws, ASME B18.2.4.3M-1979 (R2017), Metric Slotted Tapping Screws, and Metallic Drive Screws Hex Nuts ASME B18.29.1-2010 (R2017), Helical Coil Screw (Inch Series) Approved: 3/21/2017 Thread Inserts - Free Running and Screw Approved: 10/5/2017 Silvana Rodriguez-Bhatti Locking (Inch Series) Silvana Rodriguez-Bhatti Approved: 3/24/2017 ASME B18.2.5M-2013 (R2017), Metric Flanged Silvana Rodriguez-Bhatti ASME B18.6.8-2010 (R2017), Thumb Screws 12-Point Head Screws and Wing Screws (Inch Series) Approved: 10/5/2017 ASME B18.29.2M-2005 (R2017), Helical Coil Approved: 3/21/2017 Silvana Rodriguez-Bhatti Screw Thread Inserts - Free Running and Silvana Rodriguez-Bhatti Screw Locking (Metric Series) ASME B18.2.6-2019, Fasteners for Use in Approved: 3/24/2017 ASME B18.6.9-2010 (R2017), Wing Nuts (Inch Structural Applications Silvana Rodriguez-Bhatti Series) Approved: 2/27/2019 Approved: 3/21/2017 Silvana Rodriguez-Bhatti ASME B18.3-2012 (R2017), Socket Cap, Silvana Rodriguez-Bhatti Shoulder, Set Screws, and Hex Keys (Inch ASME B18.2.6M-2012, Metric Fasteners for Use Series) ASME B18.7-2007 (R2017), General Purpose In Structural Applications Approved: 10/5/2017 Semi-Tubular Rivets, Full Tubular Rivets, Split Approved: 2/9/2012 Silvana Rodriguez-Bhatti Rivets, and Rivet Caps Silvana Rodriguez-Bhatti Approved: 5/25/2017 ASME B18.31.1M-2008 (R2016), Metric Silvana Rodriguez-Bhatti ASME B18.2.8-1999 (R2017), Clearance Holes Continuous and Double End Studs for Bolts, Screws, and Studs Approved: 3/9/2016 ASME B18.7.1M-2007 (R2017), Metric General Approved: 3/21/2017 Silvana Rodriguez-Bhatti Purpose Semi-Tubular Rivets Silvana Rodriguez-Bhatti Approved: 5/25/2017 ASME B18.31.2-2014, Continuous Thread, Silvana Rodriguez-Bhatti ASME B18.2.9-2010 (R2017), Straightness Gage Flange (Stud Bolt), and Double-End Studs and Gaging for Bolts and Screws (Inch Series) ASME B18.8.1-2014, Clevis Pins And Cotter Pins Approved: 3/21/2017 Approved: 8/1/2014 (Inch Series) Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 11/5/2014 Silvana Rodriguez-Bhatti

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 115 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASME B18.8.2-2000 (R2010), Taper Pins, Dowel ASME B29.21-2013 (R2018), 700 Class Chains, ASME B30.12-2011, Handling Loads Suspended Pins, Straight Pins, Grooved Pins And Spring Attachments and Sprocket Teeth for Water from Rotorcraft Pins (Inch Series) and Sewage Treatment Plants Approved: 12/6/2011 Approved: 9/30/2010 Approved: 6/29/2018 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B30.13-2017, Storage/Retrieval (S/R) ASME B18.9-2012 (R2017), Plow Bolts ASME B29.22-2001 (R2016) , Drop Forged Machines and Associated Equipment Approved: 5/25/2017 Rivetless Chains, Sprokets Teeth Drive Approved: 3/20/2017 Silvana Rodriguez-Bhatti Chain/Drive Dogs Silvana Rodriguez-Bhatti Approved: 10/11/2016 ASME B20.1-2018, Safety Standard for Silvana Rodriguez-Bhatti ASME B30.14-2015, Side Boom Tractors Conveyors and Related Equipment Approved: 6/22/2018 ASME B29.24-2002 (R2016), Roller Load Chains Approved: 11/11/2015 Silvana Rodriguez-Bhatti for Overhead Hoists Silvana Rodriguez-Bhatti Approved: 10/12/2016 ASME B27.6-1972 (R2017), General Purpose Silvana Rodriguez-Bhatti ASME B30.16-2017, Overhead Underhung and Uniform Cross Section Spiral Retaining Rings Stationary Hoists Approved: 3/24/2017 ASME B29.26-2013, Fatigue Testing Power Approved: 7/28/2017 Silvana Rodriguez-Bhatti Transmission Roller Chain Silvana Rodriguez-Bhatti Approved: 10/3/2013 ASME B27.7-1977 (R2017), General Purpose Silvana Rodriguez-Bhatti ASME B30.18-2016, Stacker Cranes (Top or Tapered and Reduced Cross Section Retaining Under Running Bridge, Multiple Girder with Rings (Metric) ASME B29.27-2002 (R2016), Single-Pitch and Top or Under Running Trolley Hoist) Approved: 3/24/2017 Dpuble-Pitch Hollow Pin Conveyor Chains and Approved: 7/8/2016 Silvana Rodriguez-Bhatti Attachments Silvana Rodriguez-Bhatti Approved: 3/31/2016 ASME B29.1-2011 (R2016) , Precision Power Silvana Rodriguez-Bhatti ASME B30.19-2016, Cableways Transmission Roller Chains, Attachment and Approved: 4/18/2016 Sprockets ASME B29.28-2015, High Strength Chains for Silvana Rodriguez-Bhatti Approved: 10/17/2016 Power Transmission and Tension Linkages Silvana Rodriguez-Bhatti Approved: 9/9/2015 ASME B30.2-2016, Overhead and Gantry Cranes Silvana Rodriguez-Bhatti (Top Running Bridge, Single or Multiple ASME B29.100-2011 (R2016) , Double-Pitch Girder, Top Running Trolley Hoist) Roller Chains, Attachments, and Sprockets ASME B29.2M-2007 (R2017), Inverted Tooth Approved: 12/21/2016 Approved: 10/17/2016 (Silent) Chains and Sprockets Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 2/23/2017 Silvana Rodriguez-Bhatti ASME B30.20-2018, Below the Hook Lifting ASME B29.10M-1997 (R2019), Heavy Duty Devices Offset Sidebar Power Transmission Roller ASME B29.300-2015, Agricultural, Detachable Approved: 4/24/2018 Chains and Sprocket Teeth and Pintle Chains, Attachments and Sprocket Silvana Rodriguez-Bhatti Approved: 6/11/2019 Approved: 11/23/2015 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B30.21-2014, Lever Hoists (formerly Manually Lever Operated Hoists) ASME B29.12M-1997 (R2018), Steel Bushed ASME B29.400-2001 (R2018), Combination, H Approved: 1/27/2014 Rollerless Chains, Attachments and Sprockets Type Mill Chains and Sprockets Silvana Rodriguez-Bhatti Approved: 11/1/2018 Approved: 4/20/2018 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B30.22-2016, Articulating Boom Cranes Approved: 4/26/2016 ASME B29.15M-1997 (R2017), Steel Roller Type ASME B29.8-2010 (R2017), Leaf Chains, Clevises Silvana Rodriguez-Bhatti Conveyor Chains, Attachments, and Sprocket and Sheaves Teeth Approved: 2/23/2017 ASME B30.23-2016, Personnel Lifting Systems Approved: 1/30/2017 Silvana Rodriguez-Bhatti Approved: 11/7/2016 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B30.1-2015, Jacks, Industrial Rollers, Air ASME B29.17M-1998 (R2018), Hinge Type Flat Casters and Hydraulic Gantries ASME B30.24-2018, Container Cranes Top Conveyor Chains and Sprocket Teeth Approved: 4/15/2015 Approved: 8/21/2018 Approved: 11/1/2018 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B30.10-2019, Hooks ASME B30.25-2018, Scrap and Material ASME B29.200-2001 (R2017), Welded-Steel- Approved: 9/3/2019 Handlers Type Mill Chains, Welded-Steel-Type Drag Silvana Rodriguez-Bhatti Approved: 6/8/2018 Chains, Attachments, and Sprocket Teeth Silvana Rodriguez-Bhatti Approved: 1/30/2017 Silvana Rodriguez-Bhatti

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 116 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASME B30.26-2015, Rigging Hardware ASME B31.3-2018, Process Piping ASME B31P-2017, Standard Heat Treatment Approved: 8/6/2015 Approved: 8/8/2018 forFabrication Processes Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 11/15/2017 Silvana Rodriguez-Bhatti ASME B30.27-2014, Material Placement ASME B31.4-2016, Pipeline Transportation Systems Systems for Liquids and Slurries ASME B31Q-2018, Pipeline Personnel Approved: 2/19/2014 Qualification Silvana Rodriguez-Bhatti Approved: 2/22/2016 Approved: 8/30/2018 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B30.28-2015, Balance Lifting Units Approved: 11/20/2015 ASME B31.4-2019, Pipeline Transportation ASME B31T-2018, Standard Toughness Silvana Rodriguez-Bhatti Systems for Liquids and Slurries Requirements for Piping Approved: 7/18/2019 Approved: 12/6/2018 ASME B30.29-2018, Self-Erecting Tower Cranes Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 1/17/2018 Silvana Rodriguez-Bhatti ASME B31.5-2016, Refrigeration Piping and ASME B32.100-2016, Preferred Metric Sizes for Heat Transfer Components Flat, Round, Square, Rectangle, and Hexagon ASME B30.3-2016, Tower Cranes Approved: 4/12/2016 Metal Products Approved: 2/3/2016 Silvana Rodriguez-Bhatti Approved: 6/29/2016 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B31.5-2019, Refrigeration Piping and ASME B30.30-2019, Ropes Heat Transfer Components ASME B36.10M-2018, Welded and Seamless Approved: 1/29/2019 Approved: 6/21/2019 Wrought Steel Pipe Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 9/6/2018 Silvana Rodriguez-Bhatti ASME B30.4-2015, Portal and Pedestal Cranes ASME B31.8-2018 , Gas Transmission and Approved: 5/19/2015 Distribution Piping Systems ASME B36.19M-2018, Stainless Steel Pipe Silvana Rodriguez-Bhatti Approved: 8/3/2018 Approved: 8/13/2018 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B30.5-2018, Mobile and Locomotive Cranes ASME B31.8S-2018, Managing System Integrity ASME B4.1-1967 (R2009), Preferred Limits And Approved: 6/12/2018 of Gas Pipelines Fits For Cylindrical Parts Silvana Rodriguez-Bhatti Approved: 7/2/2018 Approved: 5/20/2009 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B30.6-2015, Derricks ASME B31.9-2017, Building Services Piping ASME B4.2-1978 (R2009), Prefered Metric Approved: 6/18/2015 Approved: 10/31/2017 Limits And Fits Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 5/20/2009 Silvana Rodriguez-Bhatti ASME B30.7-2016, Winches ASME B31E (Addenda)-2010, Standard for the Approved: 8/3/2016 Seismic Design and Retrofit of Above-Ground ASME B40.100-2013, Pressure Gauges and Silvana Rodriguez-Bhatti Piping Systems Gauge Attachments Approved: 5/13/2010 Approved: 10/14/2013 ASME B30.8-2015, Floating Cranes and Floating Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Derricks Approved: 3/18/2015 ASME B31E-2008, Standard for the Seismic ASME B40.200-2008 (R2013), Thermometers, Silvana Rodriguez-Bhatti Design and Retrofit of Above Ground Piping Direct Reading and Remote Reading Systmes Approved: 10/14/2013 ASME B30.9-2018, Slings Approved: 4/21/2008 Silvana Rodriguez-Bhatti Approved: 3/23/2018 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B46.1-2009, Surface Texture, Surface ASME B31G-2012 (R2017), Manual for Roughness, Waviness and Lay ASME B31.1-2018, Power Piping Determining the Remaining Strength of Approved: 10/22/2009 Approved: 6/27/2018 Corroded Pipelines: A Supplement to B31, Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Code for Pressure Piping Approved: 9/12/2017 ASME B47.1-2007 (R2012), Gage Blanks ASME B31.12-2014, Hydrogen Piping and Silvana Rodriguez-Bhatti Approved: 2/23/2012 Pipelines Silvana Rodriguez-Bhatti Approved: 10/24/2014 ASME B31J-2017, Standard Test Method for Silvana Rodriguez-Bhatti Determining Stress Intensification Factors (i- ASME B5.10-1994 (S2019), Machine Tapers Factors) for Metallic Piping Components Approved: 3/22/2019 ASME B31.12-2019, Hydrogen Piping and Approved: 1/11/2017 Silvana Rodriguez-Bhatti Pipelines Silvana Rodriguez-Bhatti Approved: 3/19/2019 Silvana Rodriguez-Bhatti

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 117 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASME B5.11-1964 (R2018), Spindle Noses and ASME B5.56M-1994 (R2019), Specification and ASME B89.1.13-2013, Micrometers Adjustable Adaptors for Multiple Spindle Performance Standard, Power Shears Approved: 2/20/2013 Drilling Heads Approved: 5/23/2019 Silvana Rodriguez-Bhatti Approved: 8/13/2018 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B89.1.14-2018, Calipers ASME B5.57-2012 (R2017), Methods for Approved: 2/27/2018 ASME B5.18-1972 (S2019), Spindle Noses and Performance Evaluation of Computer Silvana Rodriguez-Bhatti Tool Shanks for Milling Machines Numerically Controlled Lathes and Turning Approved: 3/22/2019 Centers ASME B89.1.17-2001 (R2017), Measurement of Silvana Rodriguez-Bhatti Approved: 12/14/2017 Thread Measuring Wires Silvana Rodriguez-Bhatti Approved: 8/21/2017 ASME B5.1M-1985 (S2019), T-Slots – Their Silvana Rodriguez-Bhatti Bolts, Nuts, and Tongues ASME B5.60-2014 (R2019), Workholding Approved: 5/21/2019 Chucks: Jaw Type Chucks ASME B89.1.5-1998 (R2019), Measurement of Silvana Rodriguez-Bhatti Approved: 6/28/2019 Plain External Diameters for Use as Master Silvana Rodriguez-Bhatti Discs or Cylindrical Plug Gages ASME B5.35-1983 (R2018), Machine Mounting Approved: 8/1/2019 Specifications for Abrasive Discs and Plate ASME B5.60-2014, Workholding Chucks: Jaw Silvana Rodriguez-Bhatti Mounted Wheels Type Chucks Approved: 8/13/2018 Approved: 9/15/2014 ASME B89.1.6-2002 (R2017), Measurement of Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Plain Internal Diameter for Use as Master Ring or Ring Gauges ASME B5.40-1977 (S2019), Spindle Noses and ASME B5.61-2003 (R2019), Power Presses - Approved: 10/11/2017 Tool Shanks for Horizontal Boring Machines General Purpose Single Action Straight Side Silvana Rodriguez-Bhatti Approved: 3/22/2019 Type Silvana Rodriguez-Bhatti Approved: 5/23/2019 ASME B89.1.7-2009 (R2019), Performance Silvana Rodriguez-Bhatti Standard For Steel Measuring Tapes ASME B5.47-1972 (R2018), Milling Machine Approved: 2/27/2019 Arbor Assemblies ASME B5.62-2016, Hollow Taper Tooling with Silvana Rodriguez-Bhatti Approved: 8/13/2018 Flange-Face Contact Silvana Rodriguez-Bhatti Approved: 8/22/2016 ASME B89.1.8-2011 (R2016), Performance Silvana Rodriguez-Bhatti Evaluation of Displacement-Measuring Laser ASME B5.48-1977 (S2018), Ball Screws Interferometers Approved: 8/21/2018 ASME B5.8-2001 (R2016), Chucks and Chuck Approved: 10/17/2016 Silvana Rodriguez-Bhatti Jaws Silvana Rodriguez-Bhatti Approved: 10/11/2016 ASME B5.50-2015, 7/24 Taper Tool to Spindle Silvana Rodriguez-Bhatti ASME B89.1.9-2002 (R2012), Gage Blocks Connection for Automatic Tool Change Approved: 11/29/2012 Approved: 5/21/2015 ASME B5.9-1967 (S2019), Spindle Noses for Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Tool Room Lathes, Engine Lathes, Turret Lathes, and Automatic Lathes ASME B89.3.4-2010 (R2019), Axes of Rotation: ASME B5.52-2003 (R2019), Power Presses - Approved: 3/22/2019 Methods for Specifying and Testing General Purpose Single Gap Type Silvana Rodriguez-Bhatti Approved: 8/1/2019 Approved: 5/23/2019 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B73.1-2012, Specification for Horizontal End Suction Centrifugal Pumps for Chemical ASME B89.3.7-2013 (R2018), Granite Surface ASME B5.54-2010 (R2015), Methods for Process Plates Performance Evaluation of Computer Approved: 11/14/2012 Approved: 7/20/2018 Numerically Controlled Machining Centers Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 6/9/2015 Silvana Rodriguez-Bhatti ASME B73.2-2016, Specification for Vertical In- ASME B89.4.10-2000 (R2011), Methods for Line Centrifugal Pumps for Chemical Process Performance Evaluation of Coordinate ASME B5.55M-1994 (S2018), Specification and Approved: 11/16/2016 Measuring System Software Performance Standard, Power Press Brakes Silvana Rodriguez-Bhatti Approved: 8/26/2011 Approved: 8/21/2018 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B73.3-2015, Specification for Sealless Horizontal End Suction Centrifugal Pumps for ASME B89.4.19-2006 (R2015), Performance ASME B5.56M-1994 (R2014), Specification and Chemical Process Evaluation of Laser Based Spherical Performance Standard, Power Shears Approved: 10/30/2015 Coordinate Measurement Systems Approved: 4/17/2014 Silvana Rodriguez-Bhatti Approved: 2/11/2015 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B89.1.10M-2001 (R2016), Dial Indicators (for Linear Measurement) Approved: 11/22/2016 Silvana Rodriguez-Bhatti

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 118 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASME B89.4.22-2004 (R2019), Methods for ASME B94.51M-2010 (S2016), Specifications for ASME BPVC Section II-2019 (Parts A, B, and D), Performance Evaluation of Articulated Arm Band Saw Blades (Metal Cutting) Part A - Ferrous Material Specifications; Part Coordinate Measuring Machines (CMM) Approved: 5/18/2016 B - Nonferrous Material Specifications; Part D Approved: 3/8/2019 Silvana Rodriguez-Bhatti - Materials Properties Silvana Rodriguez-Bhatti Approved: 4/25/2019 ASME B94.52M-1999 (S2016) , Specifications Silvana Rodriguez-Bhatti ASME B89.6.2-1973 (R2017), Temperature and for Hacksaw Blades Humidity Environment for Dimensional Approved: 5/18/2016 ASME BPVC Section III-2017 , Rules for Measurement Silvana Rodriguez-Bhatti Construction of Nuclear Facility Components Approved: 7/11/2017 Approved: 4/11/2017 Silvana Rodriguez-Bhatti ASME B94.54-1999 (R2015), Specifications for Silvana Rodriguez-Bhatti Hole Saws, Hole Saw Arbors, and Hole Saw ASME B89.7.2-2014 (R2019), Dimensional Accessories ASME BPVC Section III-2019, Rules for Measurement Planning Approved: 6/9/2015 Construction of Nuclear Facility Components Approved: 8/1/2019 Silvana Rodriguez-Bhatti Approved: 4/25/2019 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B94.55M-1985 (R2019), Tool Life Testing ASME B89.7.3.1-2001 (R2011), Guidelines For with Single-Point Turning Tools ASME BPVC Section IV-2017, Rules for Decision Rules: Considering Measurement Approved: 5/23/2019 Construction of Heating Boilers Uncertainty in Determining Conformance to Silvana Rodriguez-Bhatti Approved: 4/11/2017 Specifications Silvana Rodriguez-Bhatti Approved: 10/19/2011 ASME B94.6-1984 (S2016), Knurling Silvana Rodriguez-Bhatti Approved: 5/18/2016 ASME BPVC Section IV-2019, Rules for Silvana Rodriguez-Bhatti Construction of Heating Boilers ASME B89.7.3.1-2001 (R2019), Guidelines For Approved: 4/25/2019 Decision Rules: Considering Measurement ASME B94.7-1980 (S2016), Hobs Silvana Rodriguez-Bhatti Uncertainty in Determining Conformance to Approved: 5/18/2016 Specifications Silvana Rodriguez-Bhatti ASME BPVC Section IX-2017, Welding, Brazing Approved: 8/1/2019 and Fusing Qualifications Silvana Rodriguez-Bhatti ASME B94.9-2008 (R2018), Taps: Ground and Approved: 4/11/2017 Cut Threads with Cut Thread Appendix (Inch Silvana Rodriguez-Bhatti ASME B89.7.3.3-2002 (R2017), Guidelines for and Metric Sizes) Assessing the Reliability of Dimensional Approved: 7/13/2018 ASME BPVC Section IX-2019, Welding, Brazing Measurement Uncertainty Statements Silvana Rodriguez-Bhatti and Fusing Qualifications Approved: 6/8/2017 Approved: 4/25/2019 Silvana Rodriguez-Bhatti ASME BPE-2016, Bioprocessing Equipment Silvana Rodriguez-Bhatti Approved: 6/27/2016 ASME B94.19-1997 (R2019), Milling Cutters and Silvana Rodriguez-Bhatti ASME BPVC Section V-2017, Nondestructive End Mills Examination Approved: 5/23/2019 ASME BPE-2019, Bioprocessing Equipment Approved: 4/11/2017 Silvana Rodriguez-Bhatti Approved: 2/27/2019 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME B94.2-1995 (R2015), Reamers ASME BPVC Section V-2019, Nondestructive Approved: 3/30/2015 ASME BPVC Section I-2017 , Rules for Examination Silvana Rodriguez-Bhatti Construction of Power Boilers Approved: 4/25/2019 Approved: 4/11/2017 Silvana Rodriguez-Bhatti ASME B94.33-1996 (S2016), Jig Bushings Silvana Rodriguez-Bhatti Approved: 5/18/2016 ASME BPVC Section VI-2017, Recommended Silvana Rodriguez-Bhatti ASME BPVC Section I-2019, Rules For Rules for the Care and Operation of Heating Construction Of Power Boilers Boilers ASME B94.33.1-1997 (S2016) , Jig Bushings, Approved: 4/25/2019 Approved: 4/11/2017 Metric Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 6/29/2016 Silvana Rodriguez-Bhatti ASME BPVC Section II-2017, Part C - ASME BPVC Section VI-2019, Recommended Specifications for Welding Rods, Electrodes, Rules for the Care and Operation of Heating ASME B94.35-1972 (R2015), Drill Drivers, Split- and Filler Metals Boilers Sleeve, Collet Type Approved: 4/11/2017 Approved: 4/25/2019 Approved: 3/27/2015 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME BPVC Section II-2019, Part C - ASME BPVC Section VII-2019, Recommended ASME B94.49-1975 (R2010), Spade Drill Blades Specifications for Welding Rods, Electrodes, Guidelines for the Care of Power Boilers and Spade Drill Holders and Filler Metals Approved: 4/25/2019 Approved: 8/3/2010 Approved: 4/25/2019 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 119 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASME BPVC Section VIII-2019, Rules for ASME HRT-1-2016, Rules for Hoisting, Rigging, ASME MFC-16-2014 (R2019), Measurement of Construction of Pressure Vessels and Transporting Equipment for Nuclear Fluid Flow in Closed Conduit by Means of Approved: 4/25/2019 Facilities Electromagnetic Flowmeters Silvana Rodriguez-Bhatti Approved: 4/12/2016 Approved: 3/14/2019 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME BPVC Section X-2017, Fiber-Reinforced Plastic Pressure Vessels ASME HST-1-2017, Performance Standard for ASME MFC-16-2014, Measurement of Fluid Approved: 4/11/2017 Electric Chain Hoists Flow in Closed Conduit by Means of Silvana Rodriguez-Bhatti Approved: 11/17/2017 Electromagnetic Flowmeters Silvana Rodriguez-Bhatti Approved: 1/28/2014 ASME BPVC Section X-2019, Fiber-Reinforced Silvana Rodriguez-Bhatti Plastic Pressure Vessels ASME HST-2-2018, Performance Standard for Approved: 4/25/2019 Hand Chain Manually Operated Chain Hoists ASME MFC-18M-2001 (R2016) , Measurement Silvana Rodriguez-Bhatti Approved: 10/30/2018 of Fluid Flow Using Variable Area Meter Silvana Rodriguez-Bhatti Approved: 9/23/2016 ASME BPVC Section XI-2019, Rules for Inservice Silvana Rodriguez-Bhatti Inspection of Nuclear Power Plant ASME HST-3-2017, Performance Standard for Components Lever Hoists ASME MFC 21.1-2015, Measurement of Gas Approved: 4/25/2019 Approved: 1/6/2017 Flow by Means of Capillary Tube Thermal Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Mass Flowmeters and Controllers Approved: 5/19/2015 ASME BPVC Section XII-2017, Rules for ASME HST-4-2016, Performance Standard for Silvana Rodriguez-Bhatti Construction and Continued Service of Overhead Electric Wire Rope Hoists Transport Tanks Approved: 1/26/2016 ASME MFC-21.2-2010 (R2018), Thermal Mass Approved: 4/11/2017 Silvana Rodriguez-Bhatti Meters - Dispersion Flowmeters Silvana Rodriguez-Bhatti Approved: 9/25/2018 ASME HST-5-2014, Performance Standard for Silvana Rodriguez-Bhatti ASME BPVC Section XII-2019, Rules for Air Chain Hoists Construction and Continued Service of Approved: 2/18/2014 ASME MFC-22-2007 (2014), Measurement of Transport Tanks Silvana Rodriguez-Bhatti Liquid by Turbine Flowmeters Approved: 4/25/2019 Approved: 4/15/2014 Silvana Rodriguez-Bhatti ASME HST-6-2015, Performance Standard for Silvana Rodriguez-Bhatti Air Wire Rope Hoists ASME BTH-1-2017 , Design of Below-the-Hook Approved: 12/14/2015 ASME MFC-26-2018, Measurement of Gas Flow Lifting Devices Silvana Rodriguez-Bhatti by Bellmouth Inlet Flowmeters Approved: 1/6/2017 Approved: 9/25/2018 Silvana Rodriguez-Bhatti ASME MFC-1-2014, Glossary of Terms Used in Silvana Rodriguez-Bhatti the Measurement of Fluid Flow in Pipes ASME CSD-1-2018, Controls and Safety Devices Approved: 8/1/2014 ASME MFC-2M-1983 (R2013), Measurement for Automatically Fired Boilers Silvana Rodriguez-Bhatti Uncertainty for Fluid Flow in Closed Conduits Approved: 8/23/2018 Approved: 8/12/2013 Silvana Rodriguez-Bhatti ASME MFC-10M-2000 (R2011), Method for Silvana Rodriguez-Bhatti Establishing Installation Effects on ASME EA-1-2009 (R2014), Energy Assessment Flowmeters ASME MFC-3M-2004 (R2017), Measurement of for Process Heating Systems Approved: 6/8/2011 Fluid Flow in Pipes Using Orifice, Nozzle, and Approved: 9/12/2014 Silvana Rodriguez-Bhatti Venturi Silvana Rodriguez-Bhatti Approved: 5/11/2017 ASME MFC-11M-2006 (R2014), Measurement Silvana Rodriguez-Bhatti ASME EA-2-2009 (R2015), Energy Assessment of Fluid Flow in Closed Conduits by Means of for Pumping Systems Coriolis Mass Flowmeters ASME MFC-4M-1986 (R2016), Measurement of Approved: 6/16/2015 Approved: 4/15/2014 Gas Flow by Turbine Meters Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 9/23/2016 Silvana Rodriguez-Bhatti ASME EA-3-2009 (R2014), Energy Assessment ASME MFC-12M-2006 (R2014), Measurement of Industrial Steam Systems of Fluid Flow in Closed Conduits Using ASME MFC-5.1-2011 (R2018), Measurement of Approved: 9/12/2014 Multiport Averaging Pitot Primary Elements Liquid Flow in Closed Conduits Using Transit Silvana Rodriguez-Bhatti Approved: 4/15/2014 Time Ultrasonic Flowmeters Silvana Rodriguez-Bhatti Approved: 9/20/2018 ASME EA-4-2010 (R2015), Energy Assessment Silvana Rodriguez-Bhatti for Compressed Air Systems ASME MFC-14M-2003 (R2018), Measurement of Fluid Flow Using Small Bore Precision ASME MFC-5.3-2013 (R2018), Measurement of Approved: 6/16/2015 Orifice Meters Liquid Flow in Closed Conduits Using Doppler Silvana Rodriguez-Bhatti Approved: 4/24/2018 Ultrasonic Flowmeters Silvana Rodriguez-Bhatti Approved: 7/20/2018 Silvana Rodriguez-Bhatti

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 120 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASME MFC-6-2013 (R2018), Measurement of ASME NQA-1-2019, Quality Assurance ASME PCC-3-2017, Inspection Planning Using Fluid Flow in Pipes Using Vortex Flow Meters Requirements for Nuclear Facility Risk Based Methods Approved: 7/18/2018 Applications Approved: 5/11/2017 Silvana Rodriguez-Bhatti Approved: 9/4/2019 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME MFC-7-2016, Measurement of Gas Flow ASME PDS-1.1-2013, Product Definition by Means of Critical Flow Venturi Nozzles ASME NUM-1-2016, Rules for Construction of Standards (PDS) - Dimensioning, Tolerancing, Approved: 1/6/2016 Cranes, Monorails, and Hoists (with Bridge or Surface Texture, and Metrology Standards - Silvana Rodriguez-Bhatti Trolley or Hoist of the Underhung Type) Rules for Drawings with Incomplete Approved: 6/16/2016 Reference to Applicable Drawing Standard ASME MFC-8M-2001 (R2016), Fluid Flow in Silvana Rodriguez-Bhatti Approved: 12/20/2013 Closed Conduits - Connections for Pressure Silvana Rodriguez-Bhatti Signal Transmission between Primary and ASME OM-2017, Operation and Maintenance of Secondary Devices Nuclear Power Plants ASME POM 101-2013 (R2019), Performance Approved: 10/11/2016 Approved: 5/4/2017 Related Outage Inspections Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 2/5/2019 Silvana Rodriguez-Bhatti ASME MFC-9M-1998 (R2011), Measurement of ASME OM Code-2004, Code for Operation and Liquid Flow in Closed Conduits by Weighting Maintenance of Nuclear Power Plants ASME POM 102-2014, Operating Walkdowns of Method Approved: 7/23/2004 Power Plants Approved: 6/8/2011 Silvana Rodriguez-Bhatti Approved: 8/15/2014 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME OM-S/G-2007, Standards and Guides for ASME N511-2017, In-Service Testing of Nuclear Operation and Maintenance of Nuclear ASME PTC 1-2015, General Instructions Air Treatment, Heating, Ventilating, and Air- Power Plants Approved: 9/9/2015 Conditioning Systems Approved: 8/17/2007 Silvana Rodriguez-Bhatti Approved: 11/1/2017 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME PTC 10-1997 (R2014), Performance Test ASME OMa-2011, Operation and Maintenance Code on Compressors and Exhausters ASME NM-2-2018, Glass-Fiber-Reinforced of Nuclear Power Plants Approved: 3/14/2014 Thermosetting Resin Piping Systems Approved: 6/7/2011 Silvana Rodriguez-Bhatti Approved: 8/13/2018 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME PTC 11-2008 (R2018), Fans ASME OMa Code-2005, Code for Operation and Approved: 6/27/2018 ASME NM-3-2018, Nonmetallic Materials Maintenance of Nuclear Power Plants Silvana Rodriguez-Bhatti Approved: 8/16/2018 Approved: 7/8/2005 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME PTC 12.1-2015, Closed Feedwater Heaters ASME NM.1-2018, Thermoplastic Piping ASME OMb Code-2006, Code for Operation and Approved: 10/26/2015 Systems Maintenance of Nuclear Power Plants Silvana Rodriguez-Bhatti Approved: 7/27/2018 Approved: 7/6/2006 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME PTC 12.2-2010 (R2015), Steam Surface Condensers ASME NML-1-2019, Rules for the Movement of ASME P30.1-2019, Planning For Load Handling Approved: 4/17/2015 Loads using Overhead Handling Equipment in Activities Silvana Rodriguez-Bhatti Nuclear Facilities Approved: 5/3/2019 Approved: 6/5/2019 Silvana Rodriguez-Bhatti ASME PTC 12.3-1997 (R2019), Performance Silvana Rodriguez-Bhatti Test Code on Deaerators ASME PASE-2019, Safety Standard for Portable Approved: 6/18/2019 ASME NOG-1-2015, Rules for Construction of Automotive Service Equipment Silvana Rodriguez-Bhatti Overhead and Gantry Cranes (Top Running Approved: 3/25/2019 Bridge, Multiple Girder) Silvana Rodriguez-Bhatti ASME PTC 12.4-1992 (R2019), Moisture Approved: 1/8/2015 Separator Reheaters Silvana Rodriguez-Bhatti ASME PCC-1-2019, Guidelines for Pressure Approved: 7/19/2019 Boundary Bolted Flange Joint Assembly Silvana Rodriguez-Bhatti ASME NQA-1-2017, Quality Assurance Approved: 1/17/2019 Requirements for Nuclear Facility Silvana Rodriguez-Bhatti ASME PTC 12.5-2000 (R2015), Single Phase Applications Heat Exchangers Approved: 12/6/2017 ASME PCC-2-2018, Repair of Pressure Approved: 7/6/2015 Silvana Rodriguez-Bhatti Equipment and Piping Silvana Rodriguez-Bhatti Approved: 8/8/2018 Silvana Rodriguez-Bhatti ASME PTC 13-2018, Wire-To-Air Performance Test Code for Blower Systems Approved: 7/20/2018 Silvana Rodriguez-Bhatti

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 121 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASME PTC 17-1973 (R2012), Performance Test ASME PTC 29-2005 (R2015), Speed Governing ASME PTC 47-2006 (R2011), Integrated Code - Reciprocating Internal-Combustion Systems for Hydraulic Turbine Generator Gasification Combined Cycle Power Engines Units Generation Plants Approved: 5/9/2012 Approved: 7/6/2015 Approved: 6/17/2011 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti

ASME PTC 18-2011, Hydraulic Turbines and ASME PTC 30-1991 (R2016), Air Cooled Heat ASME PTC 47.1-2017, Air Separation Unit Pump - Turbines Exchangers Approved: 12/14/2017 Approved: 4/25/2011 Approved: 3/9/2016 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME PTC 47.2-2019, Performance Test Code of ASME PTC 19.1-2018, Test Uncertainty ASME PTC 30.1-2007 (R2012), Air Cooled Steam the Gasification Block of an Integrated Approved: 9/20/2018 Condensers Gasification Combined Cycle Power Plant Silvana Rodriguez-Bhatti Approved: 6/5/2012 Approved: 7/19/2019 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME PTC 19.11-2008 (R2018), Steam and Water Sampling, Conditioning, and Analysis ASME PTC 31-2011 (R2017), High-Purity Water ASME PTC 47.4-2015, Performance Test Code in the Power Cycle Treatment System for the Power Block of an Integrated Approved: 8/3/2018 Approved: 1/24/2017 Gasification Combined Cycle Power Plant Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 5/22/2015 Silvana Rodriguez-Bhatti ASME PTC 19.2-2010 (R2015), Pressure ASME PTC 34-2017, Waste Combustors with Measurement Energy Recovery ASME PTC 50-2002 (R2014), Fuel Cell Power Approved: 6/10/2015 Approved: 1/6/2017 Systems Performance Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 3/12/2014 Silvana Rodriguez-Bhatti ASME PTC 19.22-2007 (R2017), Data Acquisition ASME PTC 36-2018, Measurement of Industrial Systems Sound ASME PTC 50-2002 (R2019), Fuel Cell Power Approved: 7/12/2017 Approved: 5/15/2018 Systems Performance Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 6/21/2019 Silvana Rodriguez-Bhatti ASME PTC 19.3TW-2016, Thermowells ASME PTC 39-2005 (R2010), Steam Traps Approved: 1/5/2016 Approved: 6/14/2010 ASME PTC 51-2011 (R2016) , Gas Turbine Inlet Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Air Conditioning Equipment Approved: 8/11/2016 ASME PTC 19.5-2004 (R2013), Flow ASME PTC 4-2013, Fired Steam Generators Silvana Rodriguez-Bhatti Measurement Approved: 11/21/2013 Approved: 2/19/2013 Silvana Rodriguez-Bhatti ASME PTC 55-2013 (R2018), Gas Turbine Silvana Rodriguez-Bhatti Aircraft Engines ASME PTC 4.2-1969 (R2016), Coal Pulverizers Approved: 8/13/2018 ASME PTC 19.6-2018, Electrical Power Approved: 3/24/2016 Silvana Rodriguez-Bhatti Measurements Silvana Rodriguez-Bhatti Approved: 2/27/2018 ASME PTC 6-2004 (R2014), Steam Turbines Silvana Rodriguez-Bhatti ASME PTC 4.3-2017, Air Heaters Approved: 4/8/2014 Approved: 2/14/2017 Silvana Rodriguez-Bhatti ASME PTC 2-2001 (R2014), Definitions and Silvana Rodriguez-Bhatti Values ASME PTC 6.2-2011 (R2016), Steam Turbines in Approved: 3/11/2014 ASME PTC 4.4-2008 (R2013), Gas Turbine Heat Combined Cycles Silvana Rodriguez-Bhatti Recovery Steam Generators Approved: 3/24/2016 Approved: 5/28/2013 Silvana Rodriguez-Bhatti ASME PTC 22-2014, Gas Turbines Silvana Rodriguez-Bhatti Approved: 6/9/2014 ASME PTC 6A-2000 (R2016), Appendix A to PTC Silvana Rodriguez-Bhatti ASME PTC 40-2017, Flue Gas Desulfurization 6, the Test Code for Steam Turbines Units Performance Test Code Approved: 3/24/2016 ASME PTC 23-2003 (R2014), Atmospheric Water Approved: 5/23/2017 Silvana Rodriguez-Bhatti Cooling Equipment Silvana Rodriguez-Bhatti Approved: 3/11/2014 ASME PTC 6S-1988 (R2019, Procedures for Silvana Rodriguez-Bhatti ASME PTC 46-2015, Overall Plant Performance Routine Performance Tests of Steam Approved: 9/25/2015 Turbines ASME PTC 25-2018, Pressure Relief Devices Silvana Rodriguez-Bhatti Approved: 8/9/2019 Approved: 10/24/2018 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 122 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASME PTC 70-2009 (R2019), Performance Test ASME RAM-2-2016, Reliability, Availability, and ASME V&V 10.1-2012, An Illustration of the Code on Ramp Rates Maintainability Program Development Concepts of Verification and Validation in Approved: 6/28/2019 Process for Existing Power Plants Computational Solid Mechanics Silvana Rodriguez-Bhatti Approved: 12/2/2016 Approved: 3/7/2012 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME PVHO-1-2016, Safety Standard for Pressure Vessels for Human Occupancy ASME RT-1-2015, Safety Standard for Structural ASME V&V 20-2009 (R2016), Standard for Approved: 1/20/2016 Requirements for Light Rail Vehicles Verification and Validation in Computational Silvana Rodriguez-Bhatti Approved: 9/9/2015 Fluid Dynamics and Heat Transfer Silvana Rodriguez-Bhatti Approved: 5/4/2016 ASME PVHO-2-2016, Safety Standard for Silvana Rodriguez-Bhatti Pressure Vessels for Human Occupancy: In- ASME RT-2-2014, Safety Standard for Structural Service Guidelines Requirements for Heavy Rail Transit Vehicles ASME V&V 40-2018, Standard for Verification Approved: 1/6/2016 Approved: 1/28/2014 and Validation in Computational Methods for Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Medical Devices Approved: 8/16/2018 ASME QEI-1-2018 , Standard for the ASME RTP-1-2017, Reinforced Thermoset Silvana Rodriguez-Bhatti Qualification of Elevator Inspectors Plastic Corrosion-Resistant Equipment Approved: 6/29/2018 Approved: 8/3/2017 ASME Y14.1-2012, Decimal Inch Drawing Sheet Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Size and Format Approved: 12/19/2012 ASME QME-1-2017, Qualification of Active ASME RTP-1-2019, Reinforced Thermoset Silvana Rodriguez-Bhatti Mechanical Equipment Used in Nuclear Plastic Corrosion-Resistant Equipment Power Plants Approved: 7/26/2019 ASME Y14.100-2017, Engineering Drawing Approved: 3/21/2017 Silvana Rodriguez-Bhatti Practices Silvana Rodriguez-Bhatti Approved: 6/22/2017 ASME SRB-1-2018, Design, Installation, Silvana Rodriguez-Bhatti ASME QRO-1-2005 (R2015), Standard for the Maintenance and Application of Ball Slewing Qualification and Certification of Resource Ring Bearings ASME Y14.1M-2012, Metric Drawing Sheet Size Recovery Facility Operators Approved: 7/27/2018 and Format Approved: 3/2/2015 Silvana Rodriguez-Bhatti Approved: 12/19/2012 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME STS-1-2017, Steel Stacks ASME RA-S-2008, Standard for Level 1/Large Approved: 9/23/2016 ASME Y14.2-2014 Early Release Frequency Silvana Rodriguez-Bhatti , Line Conventions and Lettering Probabilistic Risk Assessment for Nuclear Power Plant ASME TDP-1-2013, Recommended Practices for Approved: 12/8/2014 Applications the Prevention of Water Damage to Steam Silvana Rodriguez-Bhatti Approved: 4/9/2008 Turbines Used for Electric Power Generation: Silvana Rodriguez-Bhatti Fossil-Fueled Plants ASME Y14.24-2012, Types and Applications of Approved: 2/5/2013 Engineering Drawings ASME RA-Sa-2009, Standard for Level 1/Large Silvana Rodriguez-Bhatti Approved: 11/14/2012 Early Release Frequency Probabilistic Risk Silvana Rodriguez-Bhatti Assessment for Nuclear Power Plant ASME TDP-2-2012 (R2017), Prevention of Water Applications Damage to Steam Turbines Used for Electric ASME Y14.3-2012 (R2018), Orthographic and Approved: 2/2/2009 Power Generation: Nuclear Fueled Plants Pictorial Views Silvana Rodriguez-Bhatti Approved: 3/2/2017 Approved: 4/20/2018 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME RA-Sb-2010, Standard for Level 1/Large Early Release Frequency Probabilistic Risk ASME V&V 10-2006 (R2016), Guide for ASME Y14.31-2014 (R2019), Undimensioned Assessment for Nuclear Power Plant Verification and Validation in Computational Drawings Applications Solid Mechanics Approved: 5/3/2019 Approved: 7/1/2013 Approved: 7/19/2016 Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti ASME Y14.34-2013 (R2018), Associated Lists ASME RAM-1-2013, Reliability, Availability, and ASME V&V 10-2019, Standard for Verification Approved: 8/21/2018 Maintainability of Equipment and Systems in and Validation in Computational Solid Silvana Rodriguez-Bhatti Power Plants Mechanics Approved: 8/28/2013 Approved: 7/23/2019 ASME Y14.35-2014 (R2019), Revision of Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Engineering Drawings and Associated Documents Approved: 5/3/2019 Silvana Rodriguez-Bhatti

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 123 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASME Y14.36-2018, Surface Texture Symbols ANSI B94.21-1968 (R2019), Gear Shaper Cutters ANSI/WQA/ASPE S-801-2015, Sustainable Approved: 6/15/2018 Approved: 5/23/2019 Management Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 2/3/2015 Gretchen Pienta, (847) 296-0002, [email protected] ASME Y14.37-2019, Composite Part Drawings ANSI CSA B44.1/ASME A17.5-2014, Elevator and Approved: 3/22/2019 Escalator Electrical Equipment ANSI/WQA/ASPE S-803-2017, Sustainable Silvana Rodriguez-Bhatti Approved: 7/2/2014 Drinking Water Treatment Systems Silvana Rodriguez-Bhatti Approved: 9/25/2017 ASME Y14.38-2007 (R2013), Abbreviations and Gretchen Pienta, (847) 296-0002, [email protected] Acronyms for Use on Drawings and Related ANSI CSA B44.1/ASME A17.5-2019, Elevator and Documents Escalator Electrical Equipment ANSI/WQA/ASPE/NSF S-802-2017, Sustainable Approved: 4/29/2013 Approved: 2/15/2019 Media Products for Water Treatment Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti Approved: 10/11/2017 Gretchen Pienta, (847) 296-0002, [email protected] ASME Y14.41-2019, Digital Product Definition ANSI/ISO/ASME 14414-2015, Pumping System Data Practices Energy Assessment ASQ (AMERICAN SOCIETY FOR QUALITY) Approved: 3/22/2019 Approved: 2/6/2015 ASQ/ANSI E4-2014 (R2019), Quality Silvana Rodriguez-Bhatti Silvana Rodriguez-Bhatti management systems for environmental ASME Y14.43-2011, Dimensioning and ASNT (AMERICAN SOCIETY FOR information and technology programs— Tolerancing Principles for Gages and Fixtures NONDESTRUCTIVE TESTING) Requirements with guidance for use Approved: 1/28/2011 Approved: 5/23/2019 Silvana Rodriguez-Bhatti ANSI/ASNT CP-105-2015, ASNT standard topical ASQ Customer Care outlines for qualifictions of nondestructive ASME Y14.44-2008 (R2014), Reference testing personnel ANSI/ASQ S3-2012 (R2017), An attribute chain Designations for Electrical and Electronics Approved: 10/26/2015 sampling program Approved: 7/28/2017 Parts and Equipments N/A Approved: 10/21/2014 ASQ Customer Care Silvana Rodriguez-Bhatti ANSI/ASNT CP-106 (ISO 9712-2012)-2018, Nondestructive Testing- Qualification and ANSI/ASQ Z1.11-2011 (R2016), Quality ASME Y14.47-2019, 3D Model Organization Certification of Personnel management system standards - Schema Approved: 3/23/2018 Requirements for education organizations Approved: 6/9/2016 Approved: 1/11/2019 N/A Silvana Rodriguez-Bhatti ASQ Customer Care ANSI/ASNT CP-189-2016, Addenda 2018, ASNT ASME Y14.5-2018, Dimensioning and Standard for Qualification and Certification of ANSI/ASQ/ISO 26000-2010, Guidance on Social Tolerancing Nondestructive Testing Personnel Responsibility Approved: 8/13/2018 Approved: 8/29/2018 Approved: 3/18/2011 Silvana Rodriguez-Bhatti N/A ASQ Customer Care

ASME Y14.5.1M-1994 (R2012), Mathematical ANSI/ASNT ILI-PQ-2017, IN-Line Inspection ANSI/ISO/ASQ E14001-2004, Environmental Definition of Y14.5 Personnel Qualification and Certificatiion Management Systems - Requirements with Approved: 3/7/2012 Standard Guidance for Use Approved: 1/21/2005 Silvana Rodriguez-Bhatti Approved: 12/12/2017 N/A ASQ Customer Care ASME Y14.6-2001 (R2018), Screw Thread Representation ASPE (AMERICAN SOCIETY OF PLUMBING ANSI/ISO/ASQ E14004-2004, Environmental Approved: 4/20/2018 ENGINEERS) Management Systems - General Guidelines on Principles, Systems and Support Silvana Rodriguez-Bhatti ANSI/ARCSA/ASPE 63-2013, Rainwater Techniques ASME Y14.8-2009 (R2014), Castings, Forgings Catchment Systems Approved: 1/21/2005 and Molded Parts Approved: 11/14/2013 ASQ Customer Care Approved: 2/28/2014 Gretchen Pienta, (847) 296-0002, [email protected] ASQ (ASC Z1) (AMERICAN SOCIETY FOR Silvana Rodriguez-Bhatti ANSI/ARCSA/ASPE 78-2015, Stormwater QUALITY) ASME Y32.18-1972 (S2018), Symbols for Harvesting System Design for Direct End-Use Mechanical and Acoustical Elements as Used Applications ASQ/ANSI/ISO 10001:2007, Quality in Schematic Diagrams Approved: 8/3/2015 management - Customer satisfaction - Guidelines for codes of conduct for Approved: 8/21/2018 Gretchen Pienta, (847) 296-0002, [email protected] organizations Silvana Rodriguez-Bhatti ANSI/ASPE 45-2018, Siphonic Roof Drainage Approved: 8/27/2014 ASME Y32.7-1972 (R2014), Graphic Symbols for Approved: 2/22/2019 Railroad Maps and Profiles Gretchen Pienta, (847) 296-0002, [email protected] Approved: 2/28/2014 Silvana Rodriguez-Bhatti

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 124 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASQ/ANSI/ISO 10003:2007, Quality ASQ/ANSI/ISO 14065:2013, Greenhouse gases - ASQ/ANSI/ISO 22514-7-2012, Statistical management - Customer satisfaction - Requirements for greenhouse gas validation methods in process management - Capability Guidelines for dispute resolution external to and verification bodies for use in and performance - Part 7: Capability of organizations accreditation or other forms of recognition measurement processes Approved: 8/27/2014 Approved: 9/22/2014 Approved: 1/13/2015

ASQ/ANSI/ISO 10004:2012, Quality ASQ/ANSI/ISO 14066:2011, Greenhouse gases - ASQ/ANSI/ISO 22514-8-2014, Statistical management - Customer satisfaction - Competence requirements for greenhouse methods in process management - Capability Guidelines for monitoring and measuring gas validation teams and verification teams and performance - Part 8: Machine Approved: 8/27/2014 Approved: 9/22/2014 performance of a multi-state production process ASQ/ANSI/ISO 10008:2013, Quality ASQ/ANSI/ISO 16269-4-2010, Statistical Approved: 1/13/2015 management - Customer satisfaction - interpretation of data - Part 4: Detection and Guidelines for business-to-consumer treatment of outliers ASQ/ANSI/ISO 3534-3:2013, Statistics - electronic commerce transactions Approved: 1/13/2015 Vocabulary and symbols - Part 3: Design of Approved: 8/27/2014 experiments ASQ/ANSI/ISO 16269-6-2014, Statistical Approved: 1/13/2015 ASQ/ANSI/ISO 10018:2012, Quality interpretation of data - Part 6: Determination management - Guidelines on people of statistical tolerance intervals ASQ/ANSI/ISO 7870-1-2014, Control charts - involvement and competence Approved: 1/13/2015 Part 1: General guidelines Approved: 8/27/2014 Approved: 1/13/2015 ASQ/ANSI/ISO 16269-7-2001, Statistical ASQ/ANSI/ISO 14001:2015, Environmental interpretation of data - Part 7: Median - ASQ/ANSI/ISO 7870-2:2013, Control charts - management systems - Requirements with Estimation and confidence intervals Part 2: Shewhart control charts guidance for use Approved: 1/13/2015 Approved: 1/13/2015 Approved: 9/10/2015 ASQ/ANSI/ISO 16269-8-2004, Statistical ASQ/ANSI/ISO 7870-3:2012, Control charts - ASQ/ANSI/ISO 14006:2011, Environmental interpretation of data - Part 8: Determination Part 3: Acceptance control charts management systems - Guidelines for of prediction intervals Approved: 1/13/2015 incorporating ecodesign Approved: 1/13/2015 Approved: 9/8/2014 ASQ/ANSI/ISO 7870-4-2011, Control charts - ASQ/ANSI/ISO 18091:2014, Quality Part 4: Cumulative sum charts ASQ/ANSI/ISO 14031:2013, Environmental management systems - Guidelines for the Approved: 1/13/2015 management - Environmental performance application of ISO 9001:2008 in local evaluation - Guidelines government ASQ/ANSI/ISO 7870-5-2014, Control charts - Approved: 8/27/2014 Approved: 9/22/2014 Part 5: Specialized control charts Approved: 1/13/2015 ASQ/ANSI/ISO 14034-2016, Environmental ASQ/ANSI/ISO 22514-1-2014, Statistical management - Environmental technology methods in process management - Capability ASQ/ANSI/ISO 9000-2015, Quality management verification (ETV) and performance - Part 1: General principles systems - Fundamentals and vocabulary Approved: 2/23/2017 and concepts Approved: 9/9/2015 Approved: 1/13/2015 ASQ/ANSI/ISO 14040:2006, Environmental ASQ/ANSI/ISO 9001:2015, Quality management management - Life cycle assessment - ASQ/ANSI/ISO 22514-2-2013, Statistical systems - Requirements Principles and framework methods in process management - Capability Approved: 10/21/2015 Approved: 8/27/2014 and performance - Part 2: Process capability and performance of time-dependent process ASQ/ANSI/ISO/TS 16949-2009, Quality ASQ/ANSI/ISO 14044:2006, Environmental models management systems - Particular management - Life cycle assessment - Approved: 1/13/2015 requirements for the application of ISO Requirements and guidelines 9001:2008 for automotive production and Approved: 8/27/2014 ASQ/ANSI/ISO 22514-3-2008, Statistical relevant service part organizations methods in process management - Capability Approved: 1/13/2015 ASQ/ANSI/ISO 14051:2011, Environmental and performance - Part 3: Machine management - Material flow cost performance studies for measured data on ANSI/ASQ ISO 10007-2018, Quality accounting - General framework discrete parts management Guidelines for configuration Approved: 8/27/2014 Approved: 1/13/2015 management Approved: 5/24/2018 ASQ/ANSI/ISO 14063:2006, Environmental ASQ/ANSI/ISO 22514-6-2013, Statistical management - Environmental methods in process management - Capability ANSI/ASQ ISO 19011-2018, Guidelines for communication - Guidelines and examples and performance - Part 6: Process capability auditing management systems Approved: 8/27/2014 statistics for characteristics following a Approved: 6/26/2018 multivariate normal distribution Approved: 1/13/2015 ANSI/ASQ Z1.4-2003 (R2018), Sampling procedures and tables for inspection by attributes Approved: 10/10/2018

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 125 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASQ Z1.9-2003 (R2018), Sampling ANSI/ISO 2859-1-1999, Sampling procedures for ASSP (ASC A10) (AMERICAN SOCIETY OF procedures and tables for inspection by inspection by attributes - Part 1: Sampling SAFETY PROFESSIONALS) variables for percent nonconforming schemes indexed by acceptance quality limit Approved: 10/10/2018 (AQL) for lot-by-lot inspection ANSI/ASSE A10.1-2011 (R2017), Pre-Project Approved: 12/3/2007 & Pre-Task Safety and Health Planning ANSI/ASQ/ISO 10006-2017, Quality Approved: 10/6/2017 management Guidelines for quality ANSI/ISO 2859-4-2002, Sampling procedures for Tim Fisher, (847) 768-3411, [email protected] management in projects inspection by attributes — Part 4: Procedures Approved: 5/24/2018 for assessment of declared quality levels ANSI/ASSE A10.10-2015, Safety Requirements Approved: 12/3/2007 for Temporary and Portable Space Heating ANSI/ASQ/ISO 14004-2016, Environmental Devices and Equipment management systems - General guidelines on ANSI/ISO 3534-1-2006, Statistics - Vocabulary Approved: 11/23/2015 implementation and symbols - Part 1: General statistical Tim Fisher, (847) 768-3411, [email protected] Approved: 8/3/2016 terms and terms used in probability Approved: 12/3/2007 ANSI/ASSE A10.11-2016, Safety Requirements ANSI/ASQ/ISO 16355-1-2015, Application of for Personnel Nets statistical and related methods to new ANSI/ISO 3534-2-2006, Statistics — Vocabulary Approved: 10/11/2016 technology and product development and symbols — Part 2: Applied statistics Tim Fisher, (847) 768-3411, [email protected] process - Part 1: General principles and Approved: 12/3/2007 perspectives of Quality Function Deployment ANSI/ASSE A10.12-1998 (R2016), Safety (QFD) ANSI/ISO/ASQ E14025-2006, Environmental Requirements for Excavation Approved: 4/13/2017 labels and declarations - Type III Approved: 9/26/2016 environmental declarations - Principles and Tim Fisher, (847) 768-3411, [email protected] ANSI/ASQ/ISO 19011-2011, Guidelines for procedures Auditing Management Systems Approved: 9/28/2006 ANSI/ASSE A10.13-2011 (R2017), Safety Approved: 9/11/2013 Requirements for Steel Erection ANSI/ISO/ASQ E14064-1-2006, ANSI/ISO/ASTM Approved: 10/5/2017 ANSI/ASQ/ISO 3534-4-2014, Statistics - 14064-1-2006, ANSI/ISO/NSF 14064-1-2006, Vocabulary and symbols - Part 4: Survey Greenhouse gases - Part 1: Specification Tim Fisher, (847) 768-3411, [email protected] sampling with guidance at the organization level for ANSI ASSE A10.15-1995 (R2017), Safety Approved: 1/13/2015 quantification and reporting of greenhouse Requirements for Dredging gas emissions and removals Approved: 6/15/2017 ANSI/ASQ/ISO 9004-2018, Quality management Approved: 8/16/2006 Quality of an organization Guidance to Tim Fisher, (847) 768-3411, [email protected] achieve sustained success ANSI/ISO/ASQ E14064-2-2006, ANSI/ISO/ASTM ANSI/ASSE A10.16-2009 (R2016), Safety 14064-2-2006, ANSI/ISO/NSF 14064-2-2006, Approved: 5/24/2018 Requirements for Tunnels, Shafts, and Greenhouse gases - Part 2: Specification Caissons ANSI/ASQ/ISO Q10005-2005, Quality with guidance at the project level for Approved: 9/26/2016 Management Systems - Guidelines for quantification, monitoring and reporting of Quality Plans greenhouse gas emission reductions or Tim Fisher, (847) 768-3411, [email protected] Approved: 5/25/2006 removal enhancements ANSI/ASSE A10.17-2006 (R2017), Safe Approved: 8/16/2006 ANSI/ASQ/ISO Q10012-2003, Measurement Operating Practices for Hot Mix Asphalt (HMA) Construction management systems -Requirements for ANSI/ISO/ASQ E14064-3-2006, ANSI/ISO/ASTM measurement processes and measuring 14064-3-2006, ANSI/ISO/NSF 14064-3-2006, Approved: 10/5/2017 equipment Greenhouse gases - Part 3: Specification Tim Fisher, (847) 768-3411, [email protected] Approved: 5/25/2006 with guidance for the validation and ANSI/ASSE A10.18-2007 (R2012), Safety verification of greenhouse gas assertions Requirements for Temporary Floors, Holes, ANSI/ASQ/ISO/TS 9002:2016, Quality Approved: 8/16/2006 management systems - Guidelines for the Wall Openings, Stairways and Other application of ISO 9001:2015 ANSI/ISO/ASQ Q10002-2004, Quality Unprotected Edges in Construction and Approved: 7/6/2017 Management - Customer Satisfaction - Demolition Operations Guidelines for Complaints Handling in Approved: 7/3/2012 ANSI/ISO 14065-2007, Greenhouse gases - Organizations Tim Fisher, (847) 768-3411, [email protected] Requirements for greenhouse gas validation Approved: 5/16/2006 and verification bodies for use in ANSI ASSE A10.19-2017, Safety Requirements accreditation or other forms of recognition ANSI/ISO/ASQ Q10014-2006, Quality for Pile Installation and Extraction Operations Approved: 8/17/2007 management systems -Guidelines for Approved: 6/15/2017 realizing financial and economic benefits Tim Fisher, (847) 768-3411, [email protected] ANSI/ISO 21247-2007, Combined accept-zero Approved: 8/31/2006 sampling systems and process control ANSI/ASSE A10.20-2006 (R2016), Safe procedures for product acceptance ANSI/ISO/ASQ Q10015-1999, Quality Operating Practices for Tile, Terrazzo, and Approved: 12/4/2007 Management - Guidelines for Training Marble Work Approved: 1/25/2001 Approved: 9/26/2016 Tim Fisher, (847) 768-3411, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 126 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI ASSE A10.21-2018, Safety Requirements ANSI/ASSE A10.38-2013, Basic Elements of an ANSI/ASSE A10.6-2006 (R2016), Safety & Health for Safe Construction and Demolition of Wind Employer's Program to Provide a Safe and Program Requirements for Demolition Generation / Turbine Facilities. Healthful Work Environment Operations Approved: 4/20/2018 Approved: 3/5/2013 Approved: 9/26/2016 Tim Fisher, (847) 768-3411, [email protected] Tim Fisher, (847) 768-3411, [email protected] Tim Fisher, (847) 768-3411, [email protected]

ANSI/ASSE A10.22-2007 (R2017), Safety ANSI/ASSE A10.39-1996 (R2017), Construction ANSI ASSE A10.9-2013 (R2018), Safety Requirements for Rope-Guided & Non- Safety & Health Program Requirements for Concrete and Masonry Guided Workers’ Hoists Approved: 10/5/2017 Work Approved: 10/5/2017 Tim Fisher, (847) 768-3411, [email protected] Approved: 5/3/2018 Tim Fisher, (847) 768-3411, [email protected] Tim Fisher, (847) 768-3411, [email protected] ANSI/ASSE A10.4-2016, Personnel Hoists & ANSI/ASSE A10.24-2014, Roofing - Safety Employee Elevators on Construction & ANSI/ASSP A10.23-2019, Safety Requirements Requirements for Low-Sloped Roofs Demolition Sites for the Installation of Drilled Shafts Approved: 12/3/2014 Approved: 1/6/2016 Approved: 4/12/2019 Tim Fisher, (847) 768-3411, [email protected] Tim Fisher, (847) 768-3411, [email protected] Tim Fisher, (847) 768-3411, [email protected]

ANSI/ASSE A10.25-2017, Sanitation in ANSI/ASSE A10.42-2000 (R2017), Safety ANSI/ASSP A10.28-2018, Safety Requirements Construction Requirements for Rigging Qualifications & for Work Platforms Suspended from Cranes Approved: 5/16/2017 Responsibilities or Derricks Tim Fisher, (847) 768-3411, [email protected] Approved: 10/5/2017 Approved: 7/27/2018 Tim Fisher, (847) 768-3411, [email protected] Tim Fisher, (847) 768-3411, [email protected] ANSI/ASSE A10.26-2011 (R2016), Emergency Procedures for Construction and Demolition ANSI/ASSE A10.43-2016, Confined Space Entry ANSI/ASSP A10.31-2019, Safety Requirements, Sites for Construction and Demolition Operations Definitions and Specifications for Digger Approved: 5/3/2016 Approved: 8/4/2016 Derricks Tim Fisher, (847) 768-3411, [email protected] Tim Fisher, (847) 768-3411, [email protected] Approved: 5/14/2019 Tim Fisher, (847) 768-3411, [email protected] ANSI ASSE A10.27-1998 (R2017), Hot Mix ANSI/ASSE A10.44-2014, Control of Energy Asphalt Facilities Sources (Lockout/Tagout) for Construction ANSI/ASSP A10.40-2007 (R2018), Reduction of Approved: 6/15/2017 and Demolitions Operations Musculoskeletal Problems in Construction Tim Fisher, (847) 768-3411, [email protected] Approved: 9/9/2014 Approved: 9/27/2018 Tim Fisher, (847) 768-3411, [email protected] Tim Fisher, (847) 768-3411, [email protected] ANSI/ASSE A10.3-2013, Safety Requirements for Powder-Actuated Fastening Systems ANSI/ASSE A10.46-2013, Hearing Loss ANSI/ASSP A10.7-2018, Safety and Health Approved: 9/23/2013 Prevention in Construction and Demolition Requirements for Construction and Tim Fisher, (847) 768-3411, [email protected] Workers Demolition Use, Storage, Handling and Site Approved: 2/12/2013 Movement of Commercial Explosives and ANSI/ASSE A10.32-2012, Fall Protection Tim Fisher, (847) 768-3411, [email protected] Blasting Agents Systems for Construction and Demolition Approved: 7/25/2018 Operations ANSI/ASSE A10.47-2015, Work Zone Safety for Tim Fisher, (847) 768-3411, [email protected] Approved: 9/12/2012 Highway Construction Tim Fisher, (847) 768-3411, [email protected] Approved: 4/23/2015 ANSI/ASSP A10.8-2019, Scaffolding Safety Tim Fisher, (847) 768-3411, [email protected] Requirements ANSI/ASSE A10.33-2011 (R2016), Safety and Approved: 2/7/2019 Health Program Requirements for Multi- ANSI/ASSE A10.48-2016, Criteria for Safety Tim Fisher, (847) 768-3411, [email protected] Employer Projects Practices with the Construction, Demolition, Approved: 9/26/2016 and Maintenance of Communication ASSP (SAFETY) (AMERICAN SOCIETY OF Tim Fisher, (847) 768-3411, [email protected] Structures SAFETY PROFESSIONALS) Approved: 8/3/2016 ANSI/ASSE A10.34-2001 (R2012), Protection of Tim Fisher, (847) 768-3411, [email protected] ANSI/AIHA Z9.5-2010, Laboratory Ventilation the Public on or Adjacent to Construction Standard Sites ANSI/ASSE A10.49-2015, Control of Health Approved: 4/26/2012 Approved: 7/3/2012 Hazards in Construction and Demolition Timothy Fisher, (847) 768-3411, [email protected] Tim Fisher, (847) 768-3411, [email protected] Operations Approved: 4/15/2015 ANSI/AIHA Z9.9-2010, Portable Ventilation ANSI/ASSE A10.37-2016, Debris Net Systems Tim Fisher, (847) 768-3411, [email protected] Systems Used During Construction and Demolition Approved: 6/21/2010 Operations ANSI/ASSE A10.5-2013, Safety Requirements Timothy Fisher, (847) 768-3411, [email protected] Approved: 9/26/2016 for Material Hoists Tim Fisher, (847) 768-3411, [email protected] Approved: 2/28/2013 Tim Fisher, (847) 768-3411, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 127 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASSE A1264.1-2017, Safety Requirements ANSI ASSE Z359.16-2016, Safety Requirements ANSI/ASSE Z9.1-2016, Ventilation and Control for Workplace Walking/Working Surfaces & for Climbing Ladder Fall Arrest Systems of Airborne Contaminants during Open- Their Access; Workplace Floor, Wall & Roof Approved: 11/2/2016 Surface Tank Operations Openings; Stairs & Guardrails Systems Timothy Fisher, (847) 768-3411, [email protected] Approved: 7/28/2016 Approved: 1/9/2017 Timothy Fisher, (847) 768-3411, [email protected] Timothy Fisher, (847) 768-3411, [email protected] ANSI/ASSE Z359.18-2017, Safety Requirements for Anchorage Connectors for Active Fall ANSI ASSE Z9.10-2017, Fundamentals ANSI/ASSE A1264.2-2012, Standard for the Protection Systems Governing the Design and Operation of Provision of Slip Resistance on Approved: 6/2/2017 Dilution Ventilation Systems in Industrial Walking/Working Surfaces Timothy Fisher, (847) 768-3411, [email protected] Occupancies Approved: 12/19/2012 Approved: 2/17/2017 Timothy Fisher, (847) 768-3411, [email protected] ANSI/ASSE Z359.2-2017, Minimum Timothy Fisher, (847) 768-3411, [email protected] Requirements for a Comprehensive Managed ANSI ASSE Z117.1-2016, Safety Requirements Fall Protection Program ANSI/ASSE Z9.11-2016, Laboratory for Entering Confined Spaces Approved: 1/9/2017 Decommissioning Approved: 8/4/2016 Timothy Fisher, (847) 768-3411, [email protected] Approved: 12/23/2015 Timothy Fisher, (847) 768-3411, [email protected] Timothy Fisher, (847) 768-3411, [email protected] ANSI/ASSE Z359.4-2013, Safety Requirements ANSI/ASSE Z15.1-2017, Safe Practices for Motor for Assisted-Rescue and Self-Rescue Systems, ANSI/ASSE Z9.14-2014, Testing and Vehicle Operations Subsystems and Components Performance-Verification Methodologies for Approved: 4/25/2017 Approved: 2/28/2013 Ventilation Systems for Biosafety Level 3 (BSL Timothy Fisher, (847) 768-3411, [email protected] Timothy Fisher, (847) 768-3411, [email protected] -3) and Animal Biosafety Level 3 (ABSL-3) Facilities ANSI/ASSE Z244.1-2016, The Control of ANSI ASSE Z359.6-2016, Specifications and Approved: 1/24/2014 Hazardous Energy Lockout, Tagout and Design Requirements for Active Fall Timothy Fisher, (847) 768-3411, [email protected] Alternative Methods Protection Systems Approved: 10/13/2016 Approved: 12/21/2016 ANSI/ASSE Z9.3-2017, Spray Finishing Timothy Fisher, (847) 768-3411, [email protected] Timothy Fisher, (847) 768-3411, [email protected] Operations: Safety Code for Design, Construction and Ventilation ANSI/ASSE Z359.0-2012, Definitions and ANSI/ASSE Z390.1-2017, Accepted Practices for Approved: 8/24/2017 Nomenclature Used for Fall Protection and Hydrogen Sulfide (H2S) Training Programs Timothy Fisher, (847) 768-3411, [email protected] Fall Arrest Approved: 6/30/2017 Approved: 2/23/2012 Timothy Fisher, (847) 768-3411, [email protected] ANSI/ASSP Z10.0-2019, Occupational Health Timothy Fisher, (847) 768-3411, [email protected] and Safety Management Systems ANSI/ASSE Z490.1-2016, Criteria for Accepted Approved: 8/22/2019 ANSI/ASSE Z359.1-2016, The Fall Protection Practices in Safety, Health, and Timothy Fisher, (847) 768-3411, [email protected] Code Environmental Training Approved: 8/15/2016 Approved: 12/7/2015 ANSI/ASSP Z359.12-2019, Connecting Timothy Fisher, (847) 768-3411, [email protected] Timothy Fisher, (847) 768-3411, [email protected] Components for Personal Fall Arrest Systems Approved: 6/5/2019 ANSI/ASSE Z359.11-2014, Safety Requirements ANSI/ASSE Z590.2-2003 (R2012), Criteria for Timothy Fisher, (847) 768-3411, [email protected] for Full Body Harness Establishing the Scope and Functions of the Approved: 8/25/2014 Professional Safety Position ANSI/ASSP Z359.3-2019, Safety Requirements Timothy Fisher, (847) 768-3411, [email protected] Approved: 12/20/2012 for Lanyards and Positioning Lanyards Timothy Fisher, (847) 768-3411, [email protected] Approved: 6/28/2019 ANSI/ASSE Z359.13-2013, Personal Energy Timothy Fisher, (847) 768-3411, [email protected] Absorbers and Energy Absorbing Lanyards ANSI/ASSE Z590.3-2011 (R2016), Prevention Approved: 3/13/2013 through Design: Guidelines for Addressing ANSI/ASSP Z359.7-2019, Qualification and Timothy Fisher, (847) 768-3411, [email protected] Occupational Risks in Design and Redesign Verification Testing of Fall Protection Processes Products ANSI/ASSE Z359.14-2014, Safety Requirements Approved: 12/14/2015 Approved: 4/2/2019 for Self-Retracting Devices for Personal Fall Timothy Fisher, (847) 768-3411, [email protected] Timothy Fisher, (847) 768-3411, [email protected] Arrest & Rescue Systems Approved: 9/17/2014 ANSI/ASSE Z690.1-2011, Vocabulary for Risk ANSI/ASSP Z9.2-2018, Fundamentals Governing Timothy Fisher, (847) 768-3411, [email protected] Management the Design and Operation of Local Exhaust Approved: 1/11/2011 Ventilation Systems ANSI ASSE Z359.15-2014, Safety Requirements Timothy Fisher, (847) 768-3411, [email protected] Approved: 7/2/2018 for Single Anchor Vertical Lifelines & Fall Timothy Fisher, (847) 768-3411, [email protected] Arrestors for Personal Fall Arrest Systems ANSI/ASSE Z690.3-2011, Risk Assessment Approved: 8/25/2014 Techniques ANSI/ASSP Z9.6-2018, Exhaust Systems for Timothy Fisher, (847) 768-3411, [email protected] Approved: 1/11/2011 Grinding, Polishing and Buffing Timothy Fisher, (847) 768-3411, [email protected] Approved: 12/3/2018 Timothy Fisher, (847) 768-3411, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 128 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ASSP/ISO 31000-2018, Risk Management ASTM C562-2015, Test Method for Moisture in ASTM C749-2015, Test Method for Tensile Guidelines a Graphite Sample Stress-Strain of Carbon and Graphite Approved: 7/20/2018 Approved: 10/20/2015 Approved: 10/20/2015 Timothy Fisher, (847) 768-3411, [email protected] [email protected] [email protected]

ANSI/ASSP/ISO 45001-2018, Occupational ASTM C565-2016, Test Methods for Tension ASTM C769-2015, Test Method for Sonic health and safety management systems Testing of Carbon and Graphite Mechanical Velocity in Manufactured Carbon and Requirements with guidance for use Materials Graphite Materials for Use in Obtaining Approved: 5/8/2018 Approved: 2/2/2016 Youngs Modulus Timothy Fisher, (847) 768-3411, [email protected] [email protected] Approved: 12/22/2015 [email protected] ASTM (ASTM INTERNATIONAL) ASTM C611-2005 (R2016), Test Method for Electrical Resistivity of Manufactured Carbon ASTM C781-2018, Practice for Testing Graphite ANSI/AIHA Z88.10-2010, Respirator Fit Testing and Graphite Articles at Room Temperature and Boronated Graphite Materials for High- Methods Approved: 10/18/2016 Temperature Gas-Cooled Nuclear Reactor Approved: 12/2/2010 [email protected] Components [email protected] Approved: 11/20/2018 ASTM C625-2015, Practice for Reporting [email protected] ANSI/AIHA Z88.7-2010, Color Coding of Air- Irradiation Results on Graphite Purifying Respirator Canisters, Cartridges, Approved: 10/20/2015 ASTM C783-2010 (R2015), Practice for Core and Filters [email protected] Sampling of Graphite Electrodes Approved: 6/14/2010 Approved: 10/20/2015 [email protected] ASTM C651-2015, Test Method for Flexural [email protected] Strength of Manufactured Carbon and ANSI/ASSE Z88.2-2015, Practices for Respiratory Graphite Articles Using Four-Point Loading at ASTM C808-2000 (R2016), Guide for Reporting Protection Room Temperature Friction and Wear Test Results of Approved: 3/4/2015 Approved: 10/20/2015 Manufactured Carbon and Graphite Bearing [email protected] [email protected] and Seal Materials Approved: 1/26/2016 ASTM C1025-2015, Test Method for Modulus of ASTM C662-2016, Specification for Impervious [email protected] Rupture in Bending of Electrode Graphite Graphite Pipe and Threading Approved: 10/20/2015 Approved: 1/26/2016 ASTM C816-2016, Test Method for Sulfur in [email protected] [email protected] Graphite by Combustion-Iodometric Titration Method ASTM C1039-2010 (R2015), Test Methods for ASTM C695-2015, Test Method for Compressive Approved: 2/2/2016 Apparent Porosity, Apparent Specific Gravity, Strength of Carbon and Graphite [email protected] and Bulk Density of Graphite Electrodes Approved: 6/23/2015 Approved: 10/20/2015 [email protected] ASTM C838-2016, Test Method for Bulk Density [email protected] of As-Manufactured Carbon and Graphite ASTM C714-2010 (R2015), Test Method for Shapes ASTM C1179-2016, Test Method for Oxidation Thermal Diffusivity of Carbon and Graphite Approved: 3/15/2016 Mass Loss of Manufactured Carbon and by Thermal Pulse Method [email protected] Graphite Materials in Air Approved: 10/20/2015 Approved: 2/2/2016 [email protected] ASTM C886-2010 (R2015), Test Method for [email protected] Scleroscope Hardness Testing of Carbon and ASTM C714-2017, Test Method for Thermal Graphite Materials ASTM C559-2016, Test Method for Bulk Density Diffusivity of Carbon and Graphite by Approved: 10/20/2015 by Physical Measurements of Manufactured Thermal Pulse Method [email protected] Carbon and Graphite Articles Approved: 5/23/2017 Approved: 1/26/2016 [email protected] ASTM D1094-2007 (R2019), Test Method for [email protected] Water Reaction of Aviation Fuels ASTM C747-2016, Test Method for Moduli of Approved: 2/1/2019 ASTM C560-2015, Test Methods for Chemical Elasticity and Fundamental Frequencies of [email protected] Analysis of Graphite Carbon and Graphite Materials by Sonic Approved: 10/20/2015 Resonance ASTM D1322-2014, Test Method for Smoke [email protected] Approved: 11/29/2016 Point of Kerosine and Aviation Turbine Fuel [email protected] Approved: 10/21/2014 ASTM C561-2016, Test Method for Ash in a [email protected] Graphite Sample ASTM C748-2010 (R2015), Test Method for Approved: 1/26/2016 Rockwell Hardness of Graphite Materials ASTM D1322-2014a, Test Method for Smoke [email protected] Approved: 10/20/2015 Point of Kerosine and Aviation Turbine Fuel [email protected] Approved: 12/23/2014 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 129 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM D1322-2015, Test Method for Smoke ASTM D1655-2017, Specification for Aviation ASTM D2276-2006 (R2014), Test Method for Point of Kerosine and Aviation Turbine Fuel Turbine Fuels Particulate Contaminant in Aviation Fuel by Approved: 4/21/2015 Approved: 12/20/2016 Line Sampling [email protected] [email protected] Approved: 6/17/2014 [email protected] ASTM D1322-2018, Test Method for Smoke ASTM D1655-2017a, Specification for Aviation Point of Kerosine and Aviation Turbine Fuel Turbine Fuels ASTM D2464-2017, Specification for Threaded Approved: 4/24/2018 Approved: 8/1/2017 Poly(Vinyl Chloride) (PVC) Plastic Pipe [email protected] [email protected] Fittings, Schedule 80 Approved: 5/30/2017 ASTM D1494-2017, Test Method for Diffuse ASTM D1655-2018, Specification for Aviation [email protected] Light Transmission Factor of Reinforced Turbine Fuels Plastics Panels Approved: 1/1/2018 ASTM D2466-2017, Specification for Poly(Vinyl Approved: 12/26/2017 [email protected] Chloride) (PVC) Plastic Pipe Fittings, Schedule [email protected] 40 ASTM D1655-2018a, Specification for Aviation Approved: 5/31/2017 ASTM D1655-2014a, Specification for Aviation Turbine Fuels [email protected] Turbine Fuels Approved: 4/24/2018 Approved: 10/21/2014 [email protected] ASTM D2466-2017a, Specification for Poly(Vinyl [email protected] Chloride) (PVC) Plastic Pipe Fittings, Schedule ASTM D1655-2019, Specification for Aviation 40 ASTM D1655-2015, Specification for Aviation Turbine Fuels Approved: 8/22/2017 Turbine Fuels Approved: 3/26/2019 [email protected] Approved: 1/1/2015 [email protected] [email protected] ASTM D2467-2017, Specification for Poly(Vinyl ASTM D1785-2017, Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule ASTM D1655-2015, Specification for Aviation Chloride) (PVC) Plastic Pipe, Schedules 40, 80, 80 Turbine Fuels and 120 Approved: 5/31/2017 Approved: 10/20/2015 Approved: 5/16/2017 [email protected] [email protected] [email protected] ASTM D2513-2016, Specification for ASTM D1655-2015a, Specification for Aviation ASTM D2152-2017, Test Method for Adequacy Polyethylene (PE) Gas Pressure Pipe, Tubing, Turbine Fuels of Fusion of Extruded Poly(Vinyl Chloride) and Fittings Approved: 7/15/2015 (PVC) Pipe and Molded Fittings by Acetone Approved: 12/1/2016 [email protected] Immersion [email protected] Approved: 5/16/2017 ASTM D1655-2015b, Specification for Aviation [email protected] ASTM D2513-2016a, Specification for Turbine Fuels Polyethylene (PE) Gas Pressure Pipe, Tubing, Approved: 4/20/2015 ASTM D2152-2017, Test Method for Adequacy and Fittings [email protected] of Fusion of Extruded Poly(Vinyl Chloride) Approved: 12/15/2016 (PVC) Pipe and Molded Fittings by Acetone [email protected] ASTM D1655-2015c, Specification for Aviation Immersion Turbine Fuels Approved: 11/21/2017 ASTM D2513-2018, Specification for Approved: 7/1/2015 [email protected] Polyethylene (PE) Gas Pressure Pipe, Tubing, [email protected] and Fittings ASTM D2235-2016, Specification for Solvent Approved: 10/16/2018 ASTM D1655-2015d, Specification for Aviation Cement for Acrylonitrile-Butadiene-Styrene [email protected] Turbine Fuels (ABS) Plastic Pipe and Fittings Approved: 7/28/2015 Approved: 11/22/2016 ASTM D2513-2018, Specification for [email protected] [email protected] Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings ASTM D1655-2016, Specification for Aviation ASTM D2239-2017, Specification for Approved: 8/21/2018 Turbine Fuels Polyethylene (PE) Plastic Pipe (SIDR-PR) [email protected] Approved: 6/21/2016 Based on Controlled Inside Diameter [email protected] Approved: 5/30/2017 ASTM D2513-2019, Specification for [email protected] Polyethylene (PE) Gas Pressure Pipe, Tubing, ASTM D1655-2016a, Specification for Aviation and Fittings Turbine Fuels ASTM D2241-2017, Specification for Poly(Vinyl Approved: 8/20/2019 Approved: 8/1/2016 Chloride) (PVC) Pressure-Rated Pipe (SDR [email protected] [email protected] Series) Approved: 5/16/2017 ASTM D2564-2017 (R2018), Specification for ASTM D1655-2016b, Specification for Aviation [email protected] Solvent Cements for Poly(Vinyl Chloride) Turbine Fuels (PVC) Plastic Piping Systems Approved: 9/1/2016 Approved: 8/21/2018 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 130 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM D2564-2017, Specification for Solvent ASTM D2846-2017, Specification for ASTM D2949-2018, Specification for 3.25-in. Cements for Poly(Vinyl Chloride) (PVC) Plastic Chlorinated Poly(Vinyl Chloride) (CPVC) Outside Diameter Poly(Vinyl Chloride) (PVC) Piping Systems Plastic Hot- and Cold-Water Distribution Plastic Drain, Waste, and Vent Pipe and Approved: 5/31/2017 Systems Fittings [email protected] Approved: 7/1/2017 Approved: 11/20/2018 [email protected] [email protected] ASTM D2609-2017, Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic ASTM D2846-2017, Specification for ASTM D3035-2017, Specification for Pipe Chlorinated Poly(Vinyl Chloride) (CPVC) Polyethylene (PE) Plastic Pipe (DR-PR) Based Approved: 5/31/2017 Plastic Hot- and Cold-Water Distribution on Controlled Outside Diameter [email protected] Systems Approved: 5/30/2017 Approved: 12/1/2017 [email protected] ASTM D2624-2015, Test Methods for Electrical [email protected] Conductivity of Aviation and Distillate Fuels ASTM D3122-2017, Specification for Solvent Approved: 4/21/2015 ASTM D2846-2019, Specification for Cements for Styrene-Rubber (SR) Plastic Pipe [email protected] Chlorinated Poly(Vinyl Chloride) (CPVC) and Fittings Plastic Hot- and Cold-Water Distribution Approved: 5/31/2017 ASTM D2657-2017, Practice for Heat Fusion Systems [email protected] Joining of Polyolefin Pipe and Fittings Approved: 2/1/2019 Approved: 5/31/2017 [email protected] ASTM D3138-2016, Specification for Solvent [email protected] Cements for Transition Joints Between ASTM D2846-2019a, Specification for Acrylonitrile-Butadiene-Styrene (ABS) and ASTM D2661-2018, Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Poly(Vinyl Chloride) (PVC) Non-Pressure Acrylonitrile-Butadiene-Styrene (ABS) Plastic Hot- and Cold-Water Distribution Piping Components Schedule 40 Plastic Drain, Waste, and Vent Systems Approved: 11/22/2016 Pipe and Fittings Approved: 4/30/2019 [email protected] Approved: 12/18/2018 [email protected] [email protected] ASTM D3139-2018, Specification for Joints for ASTM D2846/D2846M-2017, Specification for Plastic Pressure Pipes Using Flexible ASTM D2665-2018, Specification for Poly(Vinyl Chlorinated Poly(Vinyl Chloride) (CPVC) Elastomeric Seals Chloride) (PVC) Plastic Drain, Waste, and Plastic Hot- and Cold-Water Distribution Approved: 12/18/2018 Vent Pipe and Fittings Systems [email protected] Approved: 12/18/2018 Approved: 8/1/2017 [email protected] [email protected] ASTM D3212-2017, Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible ASTM D2672-2017, Specification for Joints for ASTM D2855-2017, Practice for the Two-Step Elastomeric Seals IPS PVC Pipe Using Solvent Cement (Primer and Solvent Cement) Method of Approved: 5/31/2017 Approved: 5/31/2017 Joining Poly(Vinyl Chloride) (PVC) or [email protected] [email protected] Chlorinated Poly(Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered ASTM D3240-2015, Test Method for ASTM D2683-2017, Specification for Socket- Sockets Undissolved Water In Aviation Turbine Fuels Type Polyethylene Fittings for Outside Approved: 5/31/2017 Approved: 6/23/2015 Diameter-Controlled Polyethylene Pipe and [email protected] [email protected] Tubing Approved: 5/31/2017 ASTM D2859-2015, Test Method for Ignition ASTM D3241-2014a, Test Method for Thermal [email protected] Characteristics of Finished Textile Floor Oxidation Stability of Aviation Turbine Fuels Covering Materials Approved: 10/21/2014 ASTM D2737-2017, Specification for Approved: 11/15/2015 [email protected] Polyethylene (PE) Plastic Tubing [email protected] Approved: 5/30/2017 ASTM D3241-2014b, Test Method for Thermal [email protected] ASTM D2859-2016, Test Method for Ignition Oxidation Stability of Aviation Turbine Fuels Characteristics of Finished Textile Floor Approved: 12/23/2014 ASTM D2749-2017, Symbols for Dimensions of Covering Materials [email protected] Plastic Pipe Fittings Approved: 6/21/2016 Approved: 5/31/2017 [email protected] ASTM D3241-2015, Test Method for Thermal [email protected] Oxidation Stability of Aviation Turbine Fuels ASTM D2925-2014 (R2019), Test Method for Approved: 7/1/2015 ASTM D2774-2017, Practice for Underground Beam Deflection of Fiberglass (Glass-Fiber- [email protected] Installation of Thermoplastic Pressure Piping Reinforced Thermosetting Resin) Pipe Under Approved: 5/30/2017 Full Bore Flow ASTM D3241-2016, Test Method for Thermal [email protected] Approved: 8/20/2019 Oxidation Stability of Aviation Turbine Fuels [email protected] Approved: 2/1/2016 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 131 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM D3241-2016a, Test Method for Thermal ASTM D3517-2019, Specification for Fiberglass ASTM D4054-2019, Practice for Evaluation of Oxidation Stability of Aviation Turbine Fuels (Glass-Fiber-Reinforced Thermosetting-Resin) New Aviation Turbine Fuels and Fuel Approved: 7/26/2016 Pressure Pipe Additives [email protected] Approved: 8/20/2019 Approved: 5/21/2019 [email protected] [email protected] ASTM D3241-2017, Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels ASTM D3678-2014, Specification for Rigid Poly ASTM D4068-2015, Specification for Approved: 9/1/2017 (Vinyl Chloride) (PVC) Interior-Profile Chlorinated Polyethylene (CPE) Sheeting for [email protected] Extrusions Concealed Water-Containment Membrane Approved: 8/19/2014 Approved: 5/26/2015 ASTM D3241-2017, Test Method for Thermal [email protected] [email protected] Oxidation Stability of Aviation Turbine Fuels Approved: 10/1/2017 ASTM D3679-2017, Specification for Rigid Poly ASTM D4068-2017, Specification for [email protected] (Vinyl Chloride) (PVC) Siding Chlorinated Polyethylene (CPE) Sheeting for Approved: 6/1/2017 Concealed Water-Containment Membrane ASTM D3241-2018, Test Method for Thermal [email protected] Approved: 3/28/2017 Oxidation Stability of Aviation Turbine Fuels [email protected] Approved: 2/15/2018 ASTM D3753-2019, Specification for Glass- [email protected] Fiber-Reinforced Polyester Manholes and ASTM D4171-2016, Specification for Fuel Wetwells System Icing Inhibitors ASTM D3241-2019, Test Method for Thermal Approved: 9/1/2019 Approved: 6/21/2016 Oxidation Stability of Aviation Turbine Fuels [email protected] [email protected] Approved: 3/1/2019 [email protected] ASTM D3839-2014 (R2019), Guide for ASTM D4171-2016a, Specification for Fuel Underground Installation of Fiberglass (Glass- System Icing Inhibitors ASTM D3241-2019, Test Method for Thermal Fiber Reinforced Thermosetting-Resin) Pipe Approved: 12/20/2016 Oxidation Stability of Aviation Turbine Fuels Approved: 8/20/2019 [email protected] Approved: 8/1/2019 [email protected] [email protected] ASTM D4226-2016, Test Methods for Impact ASTM D3841-2016, Specification for Glass- Resistance of Rigid Poly(Vinyl Chloride) (PVC) ASTM D3244-2016, Practice for Utilization of Fiber-Reinforced Polyester Plastic Panels Building Products Test Data to Determine Conformance with Approved: 5/17/2016 Approved: 5/17/2016 Specifications [email protected] [email protected] Approved: 6/21/2016 [email protected] ASTM D3948-2014 (R2018), Test Method for ASTM D4306-2015, Practice for Aviation Fuel Determining Water Separation Sample Containers for Tests Affected by ASTM D3244-2018, Practice for Utilization of Characteristics of Aviation Turbine Fuels by Trace Contamination Test Data to Determine Conformance with Portable Separometer Approved: 10/20/2015 Specifications Approved: 11/20/2018 [email protected] Approved: 11/20/2018 [email protected] [email protected] ASTM D4308-2013, Test Method for Electrical ASTM D3948-2014, Test Method for Conductivity of Liquid Hydrocarbons by ASTM D3261-2016, Specification for Butt Heat Determining Water Separation Precision Meter Fusion Polyethylene (PE) Plastic Fittings for Characteristics of Aviation Turbine Fuels by Approved: 06/18/2013 Polyethylene (PE) Plastic Pipe and Tubing Portable Separometer [email protected] Approved: 11/22/2016 Approved: 12/23/2014 [email protected] [email protected] ASTM D4477-2016, Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) ASTM D3311-2017, Specification for Drain, ASTM D4054-2014, Practice for Qualification Soffit Waste, and Vent (DWV) Plastic Fittings and Approval of New Aviation Turbine Fuels Approved: 6/28/2016 Patterns and Fuel Additives [email protected] Approved: 5/30/2017 Approved: 12/23/2014 [email protected] [email protected] ASTM D4495-2016, Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid ASTM D3311-2017a, Specification for Drain, ASTM D4054-2016, Practice for Qualification Profiles by Means of a Falling Weight Waste, and Vent (DWV) Plastic Fittings and Approval of New Aviation Turbine Fuels Approved: 5/17/2016 Patterns and Fuel Additives [email protected] Approved: 8/22/2017 Approved: 4/19/2016 [email protected] [email protected] ASTM D4551-2017, Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed ASTM D3485-2017, Specification for Coilable ASTM D4054-2017, Practice for Qualification Water-Containment Membrane High Density Polyethylene (HDPE) Cable in and Approval of New Aviation Turbine Fuels Approved: 12/26/2017 Conduit (CIC) and Fuel Additives [email protected] Approved: 5/30/2017 Approved: 12/26/2017 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 132 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM D4726-2015, Specification for Rigid Poly ASTM D5452-2012, Test Method for Particulate ASTM D6299-2017a, Practice for Applying (Vinyl Chloride) (PVC) Exterior-Profile Contamination in Aviation Fuels by Statistical Quality Assurance and Control Extrusions Used for Assembled Windows and Laboratory Filtration Charting Techniques to Evaluate Analytical Doors Approved: 6/26/2012 Measurement System Performance Approved: 5/26/2015 [email protected] Approved: 11/15/2017 [email protected] [email protected] ASTM D5813-2004 (R2018), Specification for ASTM D4726-2018, Specification for Rigid Poly Cured-In-Place Thermosetting Resin Sewer ASTM D6299-2017b, Practice for Applying (Vinyl Chloride) (PVC) Exterior-Profile Piping Systems Statistical Quality Assurance and Control Extrusions Used for Assembled Windows and Approved: 10/23/2018 Charting Techniques to Evaluate Analytical Doors [email protected] Measurement System Performance Approved: 8/21/2018 Approved: 12/15/2017 [email protected] ASTM D5926-2015, Specification for Poly (Vinyl [email protected] Chloride) (PVC) Gaskets for Drain, Waste, and ASTM D4756-2015, Practice for Installation of Vent (DWV), Sewer, Sanitary, and Storm ASTM D6299-2018, Practice for Applying Rigid Poly(Vinyl Chloride) (PVC) Siding and Plumbing Systems Statistical Quality Assurance and Control Soffit Approved: 10/20/2015 Charting Techniques to Evaluate Analytical Approved: 2/1/2015 [email protected] Measurement System Performance [email protected] Approved: 4/24/2018 ASTM D6227-2017, Specification for Unleaded [email protected] ASTM D4803-2010 (R2018), Test Method for Aviation Gasoline Containing a Non- Predicting Heat Buildup in PVC Building Hydrocarbon Component ASTM D6300-2015, Practice for Determination Products Approved: 5/23/2017 of Precision and Bias Data for Use in Test Approved: 4/24/2018 [email protected] Methods for Petroleum Products and [email protected] Lubricants ASTM D6227-2018, Specification for Unleaded Approved: 6/23/2015 ASTM D4803-2018, Test Method for Predicting Aviation Gasoline Containing a Non- [email protected] Heat Buildup in PVC Building Products hydrocarbon Component Approved: 10/23/2018 Approved: 11/20/2018 ASTM D6300-2016, Practice for Determination [email protected] [email protected] of Precision and Bias Data for Use in Test Methods for Petroleum Products and ASTM D4865-2009 (R2014), Guide for ASTM D6259-2015 (R2019), Practice for Lubricants Generation and Dissipation of Static Determination of a Pooled Limit of Approved: 4/19/2016 Electricity in Petroleum Fuel Systems Quantitation for a Test Method [email protected] Approved: 10/21/2014 Approved: 5/12/2019 [email protected] [email protected] ASTM D6300-2016a, Practice for Determination of Precision and Bias Data for Use in Test ASTM D4865-2019, Guide for Generation and ASTM D6259-2015, Practice for Determination Methods for Petroleum Products and Dissipation of Static Electricity in Petroleum of a Pooled Limit of Quantitation Lubricants Fuel Systems Approved: 7/1/2015 Approved: 7/26/2016 Approved: 7/23/2019 [email protected] [email protected] [email protected] ASTM D6299-2016, Practice for Applying ASTM D6300-2017, Practice for Determination ASTM D5001-2014 (R2014), Test Method for Statistical Quality Assurance and Control of Precision and Bias Data for Use in Test Measurement of Lubricity of Aviation Turbine Charting Techniques to Evaluate Analytical Methods for Petroleum Products and Fuels by the Ball-on-Cylinder Lubricity Measurement System Performance Lubricants Evaluator (BOCLE) Approved: 1/26/2016 Approved: 7/25/2017 Approved: 10/21/2014 [email protected] [email protected] [email protected] ASTM D6299-2017, Practice for Applying ASTM D6300-2019, Practice for Determination ASTM D5006-2011 (R2016), Test Method for Statistical Quality Assurance and Control of Precision and Bias Data for Use in Test Measurement of Fuel System Icing Inhibitors Charting Techniques to Evaluate Analytical Methods for Petroleum Products and (Ether Type) in Aviation Fuels Measurement System Performance Lubricants Approved: 4/19/2016 Approved: 1/17/2017 Approved: 6/25/2019 [email protected] [email protected] [email protected]

ASTM D5206-2013, Test Method for Windload ASTM D6299-2017, Practice for Applying ASTM D6424-2004a (R2014), Practice for Resistance of Rigid Plastic Siding Statistical Quality Assurance and Control Octane Rating Naturally Aspirated Spark Approved: 1/1/2013 Charting Techniques to Evaluate Analytical Ignition Aircraft Engines [email protected] Measurement System Performance Approved: 12/15/2014 Approved: 12/26/2017 [email protected] ASTM D5319-2017, Specification for Glass-Fiber [email protected] Reinforced Polyester Wall and Ceiling Panels Approved: 9/19/2017 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 133 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM D6424-2004a (R2019), Practice for ASTM D6708-2019, Practice for Statistical ASTM D7223-2016, Specification for Aviation Octane Rating Naturally Aspirated Spark Assessment and Improvement of Expected Certification Turbine Fuel Ignition Aircraft Engines Agreement Between Two Test Methods that Approved: 1/26/2016 Approved: 5/21/2019 Purport to Measure the Same Property of a [email protected] [email protected] Material Approved: 5/21/2019 ASTM D7223-2016a, Specification for Aviation ASTM D6615-2015, Specification for Jet B Wide- [email protected] Certification Turbine Fuel Cut Aviation Turbine Fuel Approved: 7/26/2016 Approved: 7/28/2015 ASTM D6777-2016, Test Method for Relative [email protected] [email protected] Rigidity of Poly(Vinyl Chloride)(PVC) Siding Approved: 6/28/2016 ASTM D7223-2017, Specification for Aviation ASTM D6615-2015a, Specification for Jet B [email protected] Certification Turbine Fuel Wide-Cut Aviation Turbine Fuel Approved: 7/1/2017 Approved: 4/20/2015 ASTM D6792-2017, Practice for Quality System [email protected] [email protected] in Petroleum Products and Lubricants Testing Laboratories ASTM D7224-2014 (R2018), Test Method for ASTM D6617-2017, Practice for Laboratory Bias Approved: 5/23/2017 Determining Water Separation Detection Using Single Test Result from [email protected] Characteristics of Kerosine-Type Aviation Standard Material Turbine Fuels Containing Additives by Approved: 5/23/2017 ASTM D6812-2004b (R2014), Practice for Portable Separometer [email protected] Ground-Based Octane Rating Procedures for Approved: 11/20/2018 Turbocharged/Supercharged Spark Ignition [email protected] ASTM D6708-2015, Practice for Statistical Aircraft Engines Assessment and Improvement of Expected Approved: 12/15/2014 ASTM D7224-2014, Test Method for Agreement Between Two Test Methods that [email protected] Determining Water Separation Purport to Measure the Same Property of a Characteristics of Kerosine-Type Aviation Material ASTM D6812-2004b (R2019), Practice for Turbine Fuels Containing Additives by Approved: 7/1/2015 Ground-Based Octane Rating Procedures for Portable Separometer [email protected] Turbocharged/Supercharged Spark Ignition Approved: 12/23/2014 Aircraft Engines [email protected] ASTM D6708-2016, Practice for Statistical Approved: 5/21/2019 Assessment and Improvement of Expected [email protected] ASTM D7254-2015, Specification for Agreement Between Two Test Methods that Polypropylene (PP) Siding Purport to Measure the Same Property of a ASTM D6824-2013 (R2018), Test Method for Approved: 4/21/2015 Material Determining Filterability of Aviation Turbine [email protected] Approved: 1/26/2016 Fuel [email protected] Approved: 11/20/2018 ASTM D7254-2017, Specification for [email protected] Polypropylene (PP) Siding ASTM D6708-2016a, Practice for Statistical Approved: 6/1/2017 Assessment and Improvement of Expected ASTM D6986-2010 (R2016), Test Method for [email protected] Agreement Between Two Test Methods that Free Water, Particulate and Other Purport to Measure the Same Property of a Contamination in Aviation Fuels (Visual ASTM D7301-2011 (R2015), Specification for Material Inspection Procedures) Nuclear Graphite Suitable for Components Approved: 4/19/2016 Approved: 10/18/2016 Subjected to Low Neutron Irradiation Dose [email protected] [email protected] Approved: 6/23/2015 [email protected] ASTM D6708-2016b, Practice for Statistical ASTM D7082-2015, Specification for Assessment and Improvement of Expected Polyethylene Stay In Place Form System for ASTM D7372-2017, Guide for Analysis and Agreement Between Two Test Methods that End Walls for Drainage Pipe Interpretation of Proficiency Test Program Purport to Measure the Same Property of a Approved: 10/20/2015 Results Material [email protected] Approved: 10/24/2017 Approved: 6/21/2016 [email protected] [email protected] ASTM D7219-2008 (R2014), Specification for Isotropic and Near-isotropic Nuclear ASTM D7445-2018, Specification for Rigid Poly ASTM D6708-2018, Practice for Statistical Graphites (Vinyl Chloride) (PVC) Siding with Foam Assessment and Improvement of Expected Approved: 5/20/2014 Plastic Backing (Backed Vinyl Siding) Agreement Between Two Test Methods that [email protected] Approved: 1/1/2018 Purport to Measure the Same Property of a [email protected] Material ASTM D7223-2011 (R2015), Specification for Approved: 4/24/2018 Aviation Certification Turbine Fuel ASTM D7542-2015, Test Method for Air [email protected] Approved: 4/21/2015 Oxidation of Carbon and Graphite in the [email protected] Kinetic Regime Approved: 10/20/2015 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 134 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM D7547-2014a, Specification for ASTM D7566-2016a, Specification for Aviation ASTM D7719-2014c, Specification for High- Hydrocarbon Unleaded Aviation Gasoline Turbine Fuel Containing Synthesized Octane Unleaded Fuel Approved: 10/21/2014 Hydrocarbons Approved: 10/21/2014 [email protected] Approved: 6/21/2016 [email protected] [email protected] ASTM D7547-2015, Specification for ASTM D7719-2014d, Specification for High- Hydrocarbon Unleaded Aviation Gasoline ASTM D7566-2016b, Specification for Aviation Octane Unleaded Fuel Approved: 11/1/2015 Turbine Fuel Containing Synthesized Approved: 12/23/2014 [email protected] Hydrocarbons [email protected] Approved: 7/26/2016 ASTM D7547-2017, Specification for [email protected] ASTM D7719-2015, Specification for High Hydrocarbon Unleaded Aviation Gasoline Aromatic Content Unleaded Hydrocarbon Approved: 5/23/2017 ASTM D7566-2017, Specification for Aviation Aviation Gasoline [email protected] Turbine Fuel Containing Synthesized Approved: 6/23/2015 Hydrocarbons [email protected] ASTM D7547-2017a, Specification for Approved: 5/23/2017 Hydrocarbon Unleaded Aviation Gasoline [email protected] ASTM D7719-2015a, Specification for High Approved: 11/3/2017 Aromatic Content Unleaded Hydrocarbon [email protected] ASTM D7566-2017, Specification for Aviation Aviation Gasoline Turbine Fuel Containing Synthesized Approved: 10/20/2015 ASTM D7547-2018, Specification for Hydrocarbons [email protected] Hydrocarbon Unleaded Aviation Gasoline Approved: 12/26/2017 Approved: 5/22/2018 [email protected] ASTM D7719-2016, Specification for High [email protected] Aromatic Content Unleaded Hydrocarbon ASTM D7566-2017a, Specification for Aviation Aviation Gasoline ASTM D7547-2018, Specification for Turbine Fuel Containing Synthesized Approved: 6/21/2016 Hydrocarbon Unleaded Aviation Gasoline Hydrocarbons [email protected] Approved: 11/20/2018 Approved: 10/24/2017 [email protected] [email protected] ASTM D7719-2016a, Specification for High Aromatic Content Unleaded Hydrocarbon ASTM D7566-2014b, Specification for Aviation ASTM D7566-2018, Specification for Aviation Aviation Gasoline Turbine Fuel Containing Synthesized Turbine Fuel Containing Synthesized Approved: 12/20/2016 Hydrocarbons Hydrocarbons [email protected] Approved: 10/21/2014 Approved: 4/24/2018 [email protected] [email protected] ASTM D7719-2017, Specification for High Aromatic Content Unleaded Hydrocarbon ASTM D7566-2014c, Specification for Aviation ASTM D7566-2019, Specification for Aviation Aviation Gasoline Turbine Fuel Containing Synthesized Turbine Fuel Containing Synthesized Approved: 10/24/2017 Hydrocarbons Hydrocarbons [email protected] Approved: 12/23/2014 Approved: 3/26/2019 [email protected] [email protected] ASTM D7719-2018, Specification for High Aromatic Content Unleaded Hydrocarbon ASTM D7566-2015, Specification for Aviation ASTM D7592-2015, Specification for Aviation Gasoline Turbine Fuel Containing Synthesized Specification for Grade 94 Unleaded Aviation Approved: 11/20/2018 Hydrocarbons Gasoline Certification and Test Fuel [email protected] Approved: 6/16/2015 Approved: 6/23/2015 [email protected] [email protected] ASTM D7739-2011 (R2016), Practice for Thermal Oxidative Stability Measurement via ASTM D7566-2015a, Specification for Aviation ASTM D7592-2015a, Specification for Quartz Crystal Microbalance Turbine Fuel Containing Synthesized Specification for Grade 94 Unleaded Aviation Approved: 4/19/2016 Hydrocarbons Gasoline Certification and Test Fuel [email protected] Approved: 8/15/2015 Approved: 10/20/2015 [email protected] [email protected] ASTM D7775-2011 (R2015), Guide for Measurements on Small Graphite Specimens ASTM D7566-2015b, Specification for Aviation ASTM D7618-2013 (R2017), Specification for Approved: 6/23/2015 Turbine Fuel Containing Synthesized Ethyl Tertiary-Butyl Ether (ETBE) for Blending [email protected] Hydrocarbons with Aviation Spark-Ignition Engine Fuel Approved: 11/1/2015 Approved: 6/20/2017 ASTM D7775-2016, Guide for Measurements on [email protected] [email protected] Small Graphite Specimens Approved: 12/15/2016 ASTM D7566-2016, Specification for Aviation ASTM D7719-2014b, Specification for High- [email protected] Turbine Fuel Containing Synthesized Octane Unleaded Fuel Hydrocarbons Approved: 10/15/2014 Approved: 4/19/2016 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 135 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM D7778-2018, Guide for Conducting an ASTM D7826-2017, Guide for Evaluation of New ASTM D7915-2018, Practice for Application of Interlaboratory Study to Determine the Aviation Gasolines and New Aviation Generalized Extreme Studentized Deviate Precision of a Test Method Gasoline Additives (GESD) Technique to Simultaneously Identify Approved: 12/4/2018 Approved: 6/1/2017 Multiple Outliers in a Data Set [email protected] [email protected] Approved: 7/17/2018 [email protected] ASTM D7779-2011 (R2015), Test Method for ASTM D7826-2017, Guide for Evaluation of New Determination of Fracture Toughness of Aviation Gasolines and New Aviation ASTM D7959-2016, Test Method for Chloride Graphite at Ambient Temperature Gasoline Additives Content Determination Approved: 6/23/2015 Approved: 12/26/2017 Approved: 12/20/2016 [email protected] [email protected] [email protected]

ASTM D7793-2017, Specification for Insulated ASTM D7826-2018, Guide for Evaluation of New ASTM D7959-2019, Test Method for Chloride Vinyl Siding Aviation Gasolines and New Aviation Content Determination of Aviation Turbine Approved: 6/1/2017 Gasoline Additives Fuels using Chloride Test Strip [email protected] Approved: 5/22/2018 Approved: 5/21/2019 [email protected] [email protected] ASTM D7797-2016, Test Method for Determination of the Fatty Acid Methyl ASTM D7826-2018a, Guide for Evaluation of ASTM D7960-2016, Specification for Unleaded Esters Content of Aviation Turbine Fuel Using New Aviation Gasolines and New Aviation Aviation Gasoline Test Fuel Flow Analysis by Fourier Transform Infrared Gasoline Additives Approved: 11/15/2016 Spectroscopy - Rapid Screening Method Approved: 7/17/2018 [email protected] Approved: 5/17/2016 [email protected] [email protected] ASTM D7960-2017, Specification for Unleaded ASTM D7826-2019, Guide for Evaluation of New Aviation Gasoline Test Fuel Containing a Non- ASTM D7797-2016a, Test Method for Aviation Gasolines and New Aviation hydrocarbon Component Determination of the Fatty Acid Methyl Gasoline Additives Approved: 12/26/2017 Esters Content of Aviation Turbine Fuel Using Approved: 5/21/2019 [email protected] Flow Analysis by Fourier Transform Infrared [email protected] SpectroscopyRapid Screening Method ASTM D7960-2018, Specification for Unleaded Approved: 10/18/2016 ASTM D7846-2016, Practice for Reporting Aviation Gasoline Test Fuel Containing Non- [email protected] Uniaxial Strength Data and Estimating hydrocarbon Components Weibull Distribution Parameters for Approved: 11/20/2018 ASTM D7797-2017, Test Method for Advanced Graphites [email protected] Determination of the Fatty Acid Methyl Approved: 1/26/2016 Esters Content of Aviation Turbine Fuel Using [email protected] ASTM D7972-2014, Test Method for 3 pt bend Flow Analysis by Fourier Transform Infrared strength of carbon and graphite Spectroscopy Rapid Screening Method ASTM D7856-2015, Specification for Color and Approved: 12/23/2014 Approved: 5/23/2017 Appearance Retention of Solid and [email protected] [email protected] Variegated Color Plastic Siding Products using CIELab Color Space ASTM D7990-2015, Test Method ForStandard ASTM D7797-2019, Test Method for Approved: 4/21/2015 Test Method for Using Reflectance Spectra to Determination of the Fatty Acid Methyl [email protected] Produce an Index of Temperature Rise in Esters Content of Aviation Turbine Fuel Using Polymeric Siding Flow Analysis by Fourier Transform Infrared ASTM D7856-2015a, Specification for Color and Approved: 12/1/2015 SpectroscopyRapid Screening Method Appearance Retention of Solid and [email protected] Approved: 12/18/2018 Variegated Color Plastic Siding Products using [email protected] CIELab Color Space ASTM D8073-2016, Test Method For Approved: 12/1/2015 Determination of water separation ASTM D7826-2015, Guide for Evaluation of New [email protected] characteristics of Aviation Turbine Fuel by Aviation Gasolines and New Aviation Small Scale Water Separation Instrument Gasoline Additives ASTM D7872-2013 (R2018), Test Method for Approved: 10/18/2016 Approved: 11/1/2015 Determining the Concentration of Pipeline [email protected] [email protected] Drag Reducer Additive in Aviation Turbine Fuels ASTM D8075-2016, Guide for Categorization of ASTM D7826-2016, Guide for Evaluation of New Approved: 11/20/2018 Microstructural and Microtextural Features Aviation Gasolines and New Aviation [email protected] Observed in Optical Micrographs of Graphite Gasoline Additives Approved: 12/15/2016 Approved: 4/19/2016 ASTM D7872-2013, Test Method for [email protected] [email protected] Determining the concentration of Pipeline Drag Reducer Additive in Aviation Turbine ASTM D8091-2016, Guide ForImpregnation of Fuels Graphite with Molten Salt Approved: 06/18/2013 Approved: 12/20/2016 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 136 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM D8093-2016, Guide ForNondestructive ASTM E0927-2018, Specification for Solar ASTM E1125-2018, Test Method for Calibration Evaluation of Nuclear Grade Graphite Simulation for Photovoltaic Testing of Primary Non-Concentrator Terrestrial Approved: 12/20/2016 Approved: 1/23/2018 Photovoltaic Reference Cells Using a Tabular [email protected] [email protected] Spectrum Approved: 1/23/2018 ASTM D8146-2018, Guide forEvaluating Test ASTM E0948-2018, Test Method for Electrical [email protected] Method Capability and Fitness for Use Performance of Photovoltaic Cells Using Approved: 11/20/2018 Reference Cells Under Simulated Sunlight ASTM E1129-2017, Specification for [email protected] Approved: 1/23/2018 Thermocouple Connectors [email protected] Approved: 12/26/2017 ASTM D8147-2017, Specification ForSpecial- [email protected] Purpose Test Fuels for Aviation Compression- ASTM E0973-2018, Test Method for Ignition Engines Determination of the Spectral Mismatch ASTM E1143-2018 (R2019), Test Method for Approved: 12/15/2017 Parameter Between a Photovoltaic Device Determining the Linearity of a Photovoltaic [email protected] and a Photovoltaic Reference Cell Device Parameter with Respect To a Test Approved: 1/23/2018 Parameter ASTM D8186-2018, Test Method for [email protected] Approved: 4/30/2019 Measurement of Impurities in Graphite by [email protected] Electrothermal Vaporization Inductively ASTM E1021-2018 (R2019), Test Method for Coupled Plasma Optical Emission Spectral Responsivity Measurements of ASTM E1143-2018, Test Method for Spectrometry (ETV-ICP OES) Photovoltaic Devices Determining the Linearity of a Photovoltaic Approved: 11/20/2018 Approved: 4/30/2019 Device Parameter with Respect To a Test [email protected] [email protected] Parameter Approved: 1/23/2018 ASTM D8194-2019, Practice Forevaluation Of ASTM E1021-2018, Test Method for Spectral [email protected] Suitability Of 37mm Filter Monitors And Responsivity Measurements of Photovoltaic 47mm Filters Used To Determine Particulate Devices ASTM E1159-2017, Specification for Contaminant In Aviation Turbine Fuel Approved: 1/23/2018 Thermocouple Materials, Platinum-Rhodium Approved: 12/18/2018 [email protected] Alloys, and Platinum [email protected] Approved: 12/26/2017 ASTM E1036-2018 (R2019), Test Methods for [email protected] ASTM D8255-2019, Guide forWork of Fracture Electrical Performance of Nonconcentrator Measurements on Small Nuclear Graphite Terrestrial Photovoltaic Modules and Arrays ASTM E1169-2017, Practice for Conducting Specimens Using Reference Cells Ruggedness Tests Approved: 5/21/2019 Approved: 4/30/2019 Approved: 10/24/2017 [email protected] [email protected] [email protected]

ASTM D910-2014, Specification for Aviation ASTM E1036-2018, Test Methods for Electrical ASTM E1169-2018, Practice for Conducting Gasolines Performance of Nonconcentrator Terrestrial Ruggedness Tests Approved: 9/1/2014 Photovoltaic Modules and Arrays Using Approved: 10/1/2018 [email protected] Reference Cells [email protected] Approved: 1/23/2018 ASTM D910-2016, Specification for Leaded [email protected] ASTM E1171-2018 (R2019), Test Methods for Aviation Gasolines Photovoltaic Modules in Cyclic Temperature Approved: 4/19/2016 ASTM E1040-2018, Specification for Physical and Humidity Environments [email protected] Characteristics of Nonconcentrator Approved: 4/30/2019 Terrestrial Photovoltaic Reference Cells [email protected] ASTM D910-2016a, Specification for Leaded Approved: 1/23/2018 Aviation Gasolines [email protected] ASTM E1171-2018, Test Methods for Approved: 10/18/2016 Photovoltaic Modules in Cyclic Temperature [email protected] ASTM E105-2016, Practice for Probability and Humidity Environments Sampling of Materials Approved: 1/23/2018 ASTM D910-2017, Specification for Leaded Approved: 6/14/2016 [email protected] Aviation Gasolines [email protected] Approved: 5/23/2017 ASTM E119-2015, Test Methods for Fire Tests [email protected] ASTM E108-2016, Test Methods for Fire Tests of Building Construction and Materials of Roof Coverings Approved: 7/1/2015 ASTM D910-2017a, Specification for Leaded Approved: 10/1/2016 [email protected] Aviation Gasolines [email protected] Approved: 10/24/2017 ASTM E119-2016, Test Methods for Fire Tests [email protected] ASTM E108-2017, Test Methods for Fire Tests of Building Construction and Materials of Roof Coverings Approved: 5/1/2016 Approved: 2/1/2017 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 137 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM E119-2016a, Test Methods for Fire Tests ASTM E1350-2017, Guide for Testing Sheathed ASTM E1355-2012 (R2018), Guide for of Building Construction and Materials Thermocouples, Thermocouples Assemblies, Evaluating the Predictive Capability of Approved: 7/1/2016 and Connecting Wires Prior to, and After Deterministic Fire Models [email protected] Installation or Service Approved: 7/17/2018 Approved: 12/26/2017 [email protected] ASTM E119-2018, Test Methods for Fire Tests [email protected] of Building Construction and Materials ASTM E136-2016, Test Method for Behavior of Approved: 3/1/2018 ASTM E1350-2018, Guide for Testing Sheathed Materials in a Vertical Tube Furnace at 750C [email protected] Thermocouples, Thermocouples Assemblies, Approved: 1/26/2016 and Connecting Wires Prior to, and After [email protected] ASTM E119-2018, Test Methods for Fire Tests Installation or Service of Building Construction and Materials Approved: 5/22/2018 ASTM E136-2016a, Test Method for Behavior of Approved: 6/1/2018 [email protected] Materials in a Vertical Tube Furnace at 750C [email protected] Approved: 11/22/2016 ASTM E1352-2016, Test Method for Cigarette [email protected] ASTM E119-2018, Test Methods for Fire Tests Ignition Resistance of Mock-Up Upholstered of Building Construction and Materials Furniture Assemblies ASTM E136-2019, Test Method for Behavior of Approved: 11/20/2018 Approved: 9/20/2016 Materials in a Vertical Tube Furnace at 750C [email protected] [email protected] Approved: 2/1/2019 [email protected] ASTM E119-2018a, Test Methods for Fire Tests ASTM E1353-2016, Test Methods for Cigarette of Building Construction and Materials Ignition Resistance of Components of ASTM E1362-2018 (R2019), Test Methods for Approved: 9/1/2018 Upholstered Furniture Calibration of Non-Concentrator Photovoltaic [email protected] Approved: 9/20/2016 Non-Primary Reference Cells [email protected] Approved: 4/30/2019 ASTM E122-2017, Practice for Calculating [email protected] Sample Size to Estimate, With Specified ASTM E1354-2015, Test Method for Heat and Precision, the Average for a Characteristic of Visible Smoke Release Rates for Materials ASTM E1362-2018, Test Methods for a Lot or Process and Products Using an Oxygen Consumption Calibration of Non-Concentrator Photovoltaic Approved: 6/13/2017 Calorimeter Non-Primary Reference Cells [email protected] Approved: 5/15/2015 Approved: 1/23/2018 [email protected] [email protected] ASTM E1302-2013 (R2017), Guide for Acute Animal Toxicity Testing of Water-Miscible ASTM E1354-2015a, Test Method for Heat and ASTM E1402-2013 (R2018), Guide for Sampling Metalworking Fluids Visible Smoke Release Rates for Materials Design Approved: 10/24/2017 and Products Using an Oxygen Consumption Approved: 11/20/2018 [email protected] Calorimeter [email protected] Approved: 8/1/2015 ASTM E1317-2019, Test Method for [email protected] ASTM E141-2010 (R2018), Practice for Flammability of Marine Surface Finishes Acceptance of Evidence Based on the Results Approved: 4/15/2019 ASTM E1354-2016, Test Method for Heat and of Probability Sampling [email protected] Visible Smoke Release Rates for Materials Approved: 4/24/2018 and Products Using an Oxygen Consumption [email protected] ASTM E1321-2018, Test Method for Calorimeter Determining Material Ignition and Flame Approved: 2/1/2016 ASTM E1462-2018, Test Methods for Insulation Spread Properties [email protected] Integrity and Ground Path Continuity of Approved: 11/20/2018 Photovoltaic Modules [email protected] ASTM E1354-2016a, Test Method for Heat and Approved: 2/20/2018 Visible Smoke Release Rates for Materials [email protected] ASTM E1323-2015, Guide for Evaluating and Products Using an Oxygen Consumption Laboratory Measurement Practices and the Calorimeter ASTM E1462-2018, Test Methods for Insulation Statistical Analysis of the Resulting Data Approved: 5/1/2016 Integrity and Ground Path Continuity of Approved: 4/21/2015 [email protected] Photovoltaic Modules [email protected] Approved: 1/23/2018 ASTM E1354-2017, Test Method for Heat and [email protected] ASTM E1325-2015, Terminology Relating to Visible Smoke Release Rates for Materials Design of Experiments and Products Using an Oxygen Consumption ASTM E1474-2014, Test Method for Approved: 10/1/2015 Calorimeter Determining the Heat Release Rate of [email protected] Approved: 7/25/2017 Upholstered Furniture and Mattress [email protected] Components or Composites Using a Bench ASTM E1325-2016, Terminology Relating to Scale Oxygen Consumption Calorimeter Design of Experiments Approved: 4/22/2014 Approved: 4/19/2016 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 138 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM E1480-1992 (R2013), Terminology of ASTM E1591-2013, Guide for Obtaining Data for ASTM E1652-2017, Specification for Magnesium Facility Management Building-Related Deterministic Fire Models Oxide and Aluminum Oxide Powder and Approved: 1/29/2013 Approved: 4/23/2013 Crushable Insulators Used in the [email protected] [email protected] Manufacture of Base Metal Thermocouples, Metal-Sheathed Platinum Resistance ASTM E1488-2012 (R2018), Guide for Statistical ASTM E1597-2018 (R2019), Test Method for Thermometers, and Noble Metal Procedures to Use in Developing and Saltwater Pressure Immersion and Thermocouples Applying Test Methods Temperature Testing of Photovoltaic Approved: 12/26/2017 Approved: 4/24/2018 Modules for Marine Environments [email protected] [email protected] Approved: 4/30/2019 [email protected] ASTM E1660-1995A (R2018), Classification for ASTM E1497-2017, Practice for Selection and Serviceability of an Office Facility for Support Safe Use of Water-Miscible and Straight Oil ASTM E1597-2018, Test Method for Saltwater for Office Work Metal Removal Fluids Pressure Immersion and Temperature Approved: 3/20/2018 Approved: 10/24/2017 Testing of Photovoltaic Modules for Marine [email protected] [email protected] Environments Approved: 1/23/2018 ASTM E1661-1995A (R2018), Classification for ASTM E1529-2014, Test Methods for [email protected] Serviceability of an Office Facility for Determining Effects of Large Hydrocarbon Meetings and Group Effectiveness Pool Fires on Structural Members and ASTM E162-2015, Test Method for Surface Approved: 3/20/2018 Assemblies Flammability of Materials Using a Radiant [email protected] Approved: 11/25/2014 Heat Energy Source [email protected] Approved: 6/23/2015 ASTM E1662-1995A (R2018), Classification for [email protected] Serviceability of an Office Facility for Sound ASTM E1529-2014a, Test Methods for and Visual Environment Determining Effects of Large Hydrocarbon ASTM E162-2015a, Test Method for Surface Approved: 3/20/2018 Pool Fires on Structural Members and Flammability of Materials Using a Radiant [email protected] Assemblies Heat Energy Source Approved: 12/15/2014 Approved: 7/28/2015 ASTM E1663-2003 (R2019), Classification for [email protected] [email protected] Serviceability of an Office Facility for Typical Office Information Technology ASTM E1529-2016, Test Methods for ASTM E162-2015b, Test Method for Surface Approved: 1/22/2019 Determining Effects of Large Hydrocarbon Flammability of Materials Using a Radiant [email protected] Pool Fires on Structural Members and Heat Energy Source Assemblies Approved: 12/15/2015 ASTM E1664-1995A (R2018), Classification for Approved: 11/1/2016 [email protected] Serviceability of an Office Facility for Layout [email protected] and Building Factors ASTM E162-2016, Test Method for Surface Approved: 3/20/2018 ASTM E1537-2015, Test Method for Fire Testing Flammability of Materials Using a Radiant [email protected] of Upholstered Furniture Heat Energy Source Approved: 11/17/2015 Approved: 12/15/2016 ASTM E1664-2019, Classification for [email protected] [email protected] Serviceability of an Office Facility for Layout and Building Factors ASTM E1537-2016, Test Method for Fire Testing ASTM E1623-2014, Test Method for Approved: 4/30/2019 of Upholstered Furniture Determination of Fire and Thermal [email protected] Approved: 12/15/2016 Parameters of Materials, Products, and [email protected] Systems Using an Intermediate Scale ASTM E1665-1995A (R2018), Classification for Calorimeter (ICAL) Serviceability of an Office Facility for Facility ASTM E1546-2015, Guide for Development of Approved: 11/25/2014 Protection Fire-Hazard-Assessment Standards [email protected] Approved: 3/20/2018 Approved: 6/15/2015 [email protected] [email protected] ASTM E1623-2016, Test Method for Determination of Fire and Thermal ASTM E1666-1995A (R2018), Classification for ASTM E1590-2016, Test Method for Fire Testing Parameters of Materials, Products, and Serviceability of an Office Facility for Work of Mattresses Systems Using an Intermediate Scale Outside Normal Hours or Conditions Approved: 11/15/2016 Calorimeter (ICAL) Approved: 3/20/2018 [email protected] Approved: 1/26/2016 [email protected] [email protected] ASTM E1590-2017, Test Method for Fire Testing ASTM E1667-1995 (R2018), Classification for of Mattresses Serviceability of an Office Facility for Image Approved: 3/1/2017 to the Public and Occupants [email protected] Approved: 3/20/2018 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 139 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM E1668-1995A (R2018), Classification for ASTM E1700-2016, Classification for ASTM E177-2014, Practice for Use of the Terms Serviceability of an Office Facility for Serviceability of an Office Facility for Precision and Bias in ASTM Test Methods Amenities to Attract and Retain Staff Structure and Building Envelope Approved: 5/1/2014 Approved: 3/20/2018 Approved: 10/18/2016 [email protected] [email protected] [email protected] ASTM E1776-2016, Guide for Development of ASTM E1669-1995A (R2018), Classification for ASTM E1701-1995 (R2018), Classification for Fire-Risk-Assessment Standards Serviceability of an Office Facility for Serviceability of an Office Facility for Approved: 6/21/2016 Location, Access and Wayfinding Manageability [email protected] Approved: 3/20/2018 Approved: 3/20/2018 [email protected] [email protected] ASTM E178-2016, Practice for Dealing with Outlying Observations ASTM E1670-1995A (R2018), Classification for ASTM E1725-2019, Test Methods for Fire Tests Approved: 6/14/2016 Serviceability of an Office Facility for of Fire-Resistive Barrier Systems for Electrical [email protected] Management of Operations and System Components Maintenance Approved: 6/1/2019 ASTM E1799-2018 (R2018), Practice for Visual Approved: 3/20/2018 [email protected] Inspections of Photovoltaic Modules [email protected] Approved: 5/22/2018 ASTM E1725-2019a, Test Methods for Fire Tests [email protected] ASTM E1671-1995A (R2018), Classification for of Fire-Resistive Barrier Systems for Electrical Serviceability of an Office Facility for System Components ASTM E1799-2018, Practice for Visual Cleanliness Approved: 7/15/2019 Inspections of Photovoltaic Modules Approved: 3/20/2018 [email protected] Approved: 1/23/2018 [email protected] [email protected] ASTM E1740-2015, Test Method for ASTM E1678-2015, Test Method for Measuring Determining the Heat Release Rate and ASTM E18-2015, Test Methods for Rockwell Smoke Toxicity for Use in Fire Hazard Analysis Other Fire-Test-Response Characteristics of Hardness of Metallic Materials Approved: 11/15/2015 Wall Covering or Ceiling Covering Composites Approved: 2/1/2015 [email protected] Using a Cone Calorimeter [email protected] Approved: 4/21/2015 ASTM E1679-2013, Practice for Setting the [email protected] ASTM E18-2016, Test Methods for Rockwell Requirements for the Serviceability of a Hardness of Metallic Materials Building or Building-Related Facility ASTM E1751-2017, Guide for Temperature Approved: 5/17/2016 Approved: 10/29/2013 Electromotive Force (emf) Tables for Non- [email protected] [email protected] Letter Designated Thermocouple Combinations ASTM E18-2017, Test Methods for Rockwell ASTM E1684-2017, Specification for Miniature Approved: 12/26/2017 Hardness of Metallic Materials Thermocouple Connectors [email protected] Approved: 7/1/2017 Approved: 12/26/2017 [email protected] [email protected] ASTM E176-2014c, Terminology of Fire Standards ASTM E18-2017, Test Methods for Rockwell ASTM E1687-2010 (R2014), Test Method for Approved: 11/25/2014 Hardness of Metallic Materials Determining Carcinogenic Potential of Virgin [email protected] Approved: 10/1/2017 Base Oils in Metalworking Fluids [email protected] Approved: 10/15/2014 ASTM E176-2015, Terminology of Fire [email protected] Standards ASTM E18-2018, Test Methods for Rockwell Approved: 2/1/2015 Hardness of Metallic Materials ASTM E1692-1995A (R2018), Classification for [email protected] Approved: 7/1/2018 Serviceability of an Office Facility for Change [email protected] and Churn by Occupants ASTM E176-2015a, Terminology of Fire Approved: 3/20/2018 Standards ASTM E18-2018a, Test Methods for Rockwell [email protected] Approved: 8/1/2015 Hardness of Metallic Materials [email protected] Approved: 10/1/2018 ASTM E1693-1995 (R2018), Classification for [email protected] Serviceability of an Office Facility for ASTM E176-2018, Terminology of Fire Protection of Occupant Assets Standards ASTM E18-2019, Test Methods for Rockwell Approved: 3/20/2018 Approved: 3/1/2018 Hardness of Metallic Materials [email protected] [email protected] Approved: 1/1/2019 [email protected] ASTM E1694-1995A (R2018), Classification for ASTM E176-2019, Terminology of Fire Serviceability of an Office Facility for Special Standards ASTM E1802-2018 (R2018), Test Methods for Facilities and Technologies Approved: 12/15/2018 Wet Insulation Integrity Testing of Approved: 3/20/2018 [email protected] Photovoltaic Modules [email protected] Approved: 5/22/2018 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 140 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM E1802-2018, Test Methods for Wet ASTM E2026-2015, Guide for Seismic Risk ASTM E2073-2019, Reinstatement of Test Insulation Integrity Testing of Photovoltaic Assessment of Buildings Method for Photopic Luminance of Modules Approved: 12/15/2015 Photoluminescent (Phosphorescent) Approved: 1/23/2018 [email protected] Markings [email protected] Approved: 7/9/2019 ASTM E2026-2016, Guide for Seismic Risk [email protected] ASTM E1822-2017, Test Method for Fire Testing Assessment of Buildings of Stacked Chairs Approved: 5/17/2016 ASTM E2102-2015, Test Method for Approved: 11/21/2017 [email protected] Measurement of Mass Loss and Ignitability [email protected] for Screening Purposes Using a Conical ASTM E2032-2009 (R2017), Guide for Extension Radiant Heater ASTM E1830-2019 (R2019), Test Methods for of Data From Fire Resistance Tests Approved: 10/20/2015 Determining Mechanical Integrity of Conducted in Accordance with ASTM E 119 [email protected] Photovoltaic Modules Approved: 4/28/2017 Approved: 4/30/2019 [email protected] ASTM E2102-2017, Test Method for [email protected] Measurement of Mass Loss and Ignitability ASTM E2047-2018 (R2019), Test Method for for Screening Purposes Using a Conical ASTM E1836-2009 (R2016), Practice for Building Wet Insulation Integrity Testing of Radiant Heater Floor Area Measurements for Facility Photovoltaic Arrays Approved: 7/25/2017 Management Approved: 4/30/2019 [email protected] Approved: 3/22/2016 [email protected] [email protected] ASTM E2136-2013, Standard Guide for ASTM E2047-2018, Test Method for Wet Specifying and Evaluating Performance of ASTM E1869-2014, Guide for Confidentiality, Insulation Integrity Testing of Photovoltaic Single Family Attached and Detached Privacy, Access, and Data Security Principles Arrays Dwellings-Durability for Health Information Including Electronic Approved: 1/23/2018 Approved: 1/29/2013 Health Records [email protected] [email protected] Approved: 4/22/2014 [email protected] ASTM E2058-2019, Test Methods for ASTM E2144-2011 (R2016), Practice for Measurement of Material Flammability Using Personal Sampling and Analysis of Endotoxin ASTM E1966-2015 (R2019), Test Method for a Fire Propagation Apparatus (FPA) in Metalworking Fluid Aerosols in Workplace Fire-Resistive Joint Systems Approved: 7/23/2019 Atmospheres Approved: 4/30/2019 [email protected] Approved: 10/18/2016 [email protected] [email protected] ASTM E2061-2015, Guide for Fire Hazard ASTM E1966-2015, Test Method for Fire- Assessment of Rail Transportation Vehicles ASTM E2148-2016, Guide for Using Documents Resistive Joint Systems Approved: 11/17/2015 Related to Metalworking or Metal Removal Approved: 6/23/2015 [email protected] Fluid Health and Safety [email protected] Approved: 10/18/2016 ASTM E2061-2018, Guide for Fire Hazard [email protected] ASTM E1994-2009 (R2018), Practice for Use of Assessment of Rail Transportation Vehicles Process Oriented AOQL and LTPD Sampling Approved: 3/1/2018 ASTM E2151-2010, Terminology Of Guides For Plans [email protected] Specifying And Evaluating Performance Of Approved: 9/25/2018 Single Family Attached And Detached [email protected] ASTM E2067-2015, Practice for Full-Scale Dwellings Oxygen Consumption Calorimetry Fire Tests Approved: 10/1/2010 ASTM E1995-2016, Test Method for Approved: 11/17/2015 [email protected] Measurement of Smoke Obscuration Using a [email protected] Conical Radiant Source in a Single Closed ASTM E2156-2013, Standard Guide for Chamber, With the Test Specimen Oriented ASTM E207-2017, Test Method for Thermal Evaluating Economic Performance of Horizontally EMF Test of Single Thermoelement Materials Alternative Designs, Systems, and Materials Approved: 12/20/2016 by Comparison with a Reference in Compliance with Performance Standard [email protected] Thermoelement of Similar EMF-Temperature Guides for Single-Family Attached and Properties Detached Dwellings ASTM E1995-2018, Test Method for Approved: 12/26/2017 Approved: 1/29/2013 Measurement of Smoke Obscuration Using a [email protected] [email protected] Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented ASTM E2072-2014, Specification for ASTM E2159-2015, Guide for Selection, Horizontally Photoluminescent (Phosphorescent) Safety Assignment, and Monitoring of Persons to Be Approved: 12/1/2018 Markings Utilized as Assessors/Auditors or Technical [email protected] Approved: 8/1/2014 Experts [email protected] Approved: 6/15/2015 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 141 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM E2169-2017, Practice for Selecting ASTM E2236-2018 (R2019), Test Methods for ASTM E23-2016b, Test Methods for Notched Antimicrobial Pesticides for Use in Water- Measurement of Electrical Performance and Bar Impact Testing of Metallic Materials Miscible Metalworking Fluids Spectral Response of Nonconcentrator Approved: 6/21/2016 Approved: 3/28/2017 Multijunction Photovoltaic Cells and Modules [email protected] [email protected] Approved: 4/30/2019 [email protected] ASTM E23-2018, Test Methods for Notched Bar ASTM E2181-2017, Specification for Compacted Impact Testing of Metallic Materials Mineral-Insulated, Metal-Sheathed, Noble ASTM E2236-2018, Test Methods for Approved: 6/1/2018 Metal Thermocouples and Thermocouple Measurement of Electrical Performance and [email protected] Cable Spectral Response of Nonconcentrator Approved: 12/26/2017 Multijunction Photovoltaic Cells and Modules ASTM E230-2017, Specification for [email protected] Approved: 1/23/2018 Temperature-Electromotive Force (emf) [email protected] Tables for Standardized Thermocouples ASTM E2187-2016, Test Method for Measuring Approved: 11/21/2017 the Ignition Strength of Cigarettes ASTM E2257-2016, Test Method for Room Fire [email protected] Approved: 6/1/2016 Test of Wall and Ceiling Materials and [email protected] Assemblies ASTM E2307-2015, Test Method for Approved: 2/1/2016 Determining Fire Resistance of Perimeter Fire ASTM E220-2017, Test Method for Calibration [email protected] Barriers Using Intermediate-Scale, Multi- of Thermocouples By Comparison Techniques story Test Apparatus Approved: 12/26/2017 ASTM E2257-2017, Test Method for Room Fire Approved: 1/20/2015 [email protected] Test of Wall and Ceiling Materials and [email protected] Assemblies ASTM E2226-2015 (R2019), Practice for Approved: 4/15/2017 ASTM E2307-2015a, Test Method for Application of Hose Stream [email protected] Determining Fire Resistance of Perimeter Fire Approved: 4/30/2019 Barriers Using Intermediate-Scale, Multi- [email protected] ASTM E2267-2013, GUIDE FOR SPECIFYING AND story Test Apparatus EVALUATING PERFORMANCE OF SINGLE Approved: 4/21/2015 ASTM E2226-2015, Practice for Application of FAMILY ATTACHED AND DETACHED [email protected] Hose Stream DWELLINGS --INDOOR AIR QUALITY Approved: 4/21/2015 Approved: 1/29/2013 ASTM E2307-2015b, Test Method for [email protected] [email protected] Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi- ASTM E2226-2015a, Practice for Application of ASTM E2280-2017, Guide for Fire Hazard story Test Apparatus Hose Stream Assessment of the Effect of Upholstered Approved: 10/20/2015 Approved: 6/23/2015 Seating Furniture Within Patient Rooms of [email protected] [email protected] Health Care Facilities Approved: 12/26/2017 ASTM E2307-2019, Test Method for ASTM E2226-2015b, Practice for Application of [email protected] Determining Fire Resistance of Perimeter Fire Hose Stream Barriers Using Intermediate-Scale, Multi- Approved: 10/20/2015 ASTM E2281-2015, Practice for Process and story Test Apparatus [email protected] Measurement Capability Indices Approved: 7/23/2019 Approved: 10/20/2015 [email protected] ASTM E2231-2015, Practice for Specimen [email protected] Preparation and Mounting of Pipe and Duct ASTM E2320-2004 (R2018), Classification for Insulation Materials to Assess Surface ASTM E2282-2014 (R2019), Guide for Defining Serviceability of an Office Facility for Thermal Burning Characteristics the Test Result of a Test Method Environment and Indoor Air Conditions Approved: 4/21/2015 Approved: 4/30/2019 Approved: 3/20/2018 [email protected] [email protected] [email protected]

ASTM E2231-2018, Practice for Specimen ASTM E2282-2014, Guide for Defining the Test ASTM E2334-2008 (R2018), Practice for Setting Preparation and Mounting of Pipe and Duct Result of a Test Method an Upper Confidence Bound for a Fraction or Insulation Materials to Assess Surface Approved: 10/21/2014 Number of Non-Conforming items, or a Rate Burning Characteristics [email protected] of Occurrence for Non-Conformities, Using Approved: 3/1/2018 Attribute Data, When There Is a Zero [email protected] ANSII/ASTM E23-2016a, Test Methods for Response in the Sample Notched Bar Impact Testing of Metallic Approved: 9/25/2018 ASTM E2234-2009 (R2018), Practice for Materials [email protected] Sampling a Stream of Product by Attributes Approved: 4/1/2016 Indexed by AQL [email protected] ASTM E2335-2017, Guide for Laboratory Approved: 9/25/2018 Monitors [email protected] ASTM E23-2016, Test Methods for Notched Bar Approved: 7/25/2017 Impact Testing of Metallic Materials [email protected] Approved: 1/1/2016 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 142 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM E2336-2016, Test Methods for Fire ASTM E2523-2013 (R2018), Terminology for ASTM E2573-2017, Practice for Specimen Resistive Grease Duct Enclosure Systems Metalworking Fluids and Operations Preparation and Mounting of Site-Fabricated Approved: 4/1/2016 Approved: 10/23/2018 Stretch Systems to Assess Surface Burning [email protected] [email protected] Characteristics Approved: 7/25/2017 ASTM E235-2017 (R2018), Specification for ASTM E2527-2018 (R2019), Test Method for [email protected] Thermocouples, Sheathed, Type K and Type Electrical Performance of Concentrator N, for Nuclear or for Other High-Reliability Terrestrial Photovoltaic Modules and ASTM E2574/E2574M-2017, Test Method for Applications Systems Under Natural Sunlight Fire Testing of School Bus Seat Assemblies Approved: 4/24/2018 Approved: 4/30/2019 Approved: 7/25/2017 [email protected] [email protected] [email protected]

ASTM E235-2019, Specification for Type K and ASTM E2527-2018, Test Method for Electrical ASTM E2579-2015, Practice for Specimen Type N Mineral-Insulated, Metal-Sheathed Performance of Concentrator Terrestrial Preparation and Mounting of Wood Products Thermocouples for Nuclear or for Other High- Photovoltaic Modules and Systems Under to Assess Surface Burning Characteristics Reliability Applications Natural Sunlight Approved: 4/21/2015 Approved: 5/21/2019 Approved: 1/23/2018 [email protected] [email protected] [email protected] ASTM E2579-2019, Practice for Specimen ASTM E2351-2013, Standard Guide for ASTM E2536-2015, Guide for Assessment of Preparation and Mounting of Wood Products Specifying and Evaluating Performance of Measurement Uncertainty in Fire Tests to Assess Surface Burning Characteristics Single Family Attached and Detached Approved: 1/20/2015 Approved: 4/1/2019 Dwellings-Functionality [email protected] [email protected] Approved: 1/29/2013 [email protected] ASTM E2536-2015a, Guide for Assessment of ASTM E2586-2016, Practice for Calculating and Measurement Uncertainty in Fire Tests Using Basic Statistics ASTM E2404-2015, Practice for Specimen Approved: 10/20/2015 Approved: 11/22/2016 Preparation and Mounting of Textile, Paper [email protected] [email protected] or Polymeric (Including Vinyl) Wall or Ceiling Coverings, and of Facings and Wood Veneers ASTM E2554-2018, Practice for Estimating and ASTM E2586-2018, Practice for Calculating and Intended to be Applied on Site Over a Wood Monitoring the Uncertainty of Test Results of Using Basic Statistics Substrate, to Assess Surface Burning a Test Method Using Control Chart Approved: 5/15/2018 Characteristics Techniques [email protected] Approved: 4/21/2015 Approved: 4/24/2018 [email protected] [email protected] ASTM E2586-2019, Practice for Calculating and Using Basic Statistics ASTM E2404-2015a, Practice for Specimen ASTM E2555-2012 (R2018), Practice for Factors Approved: 4/30/2019 Preparation and Mounting of Textile, Paper and Procedures for Applying the MIL-STD-105 [email protected] or Polymeric (Including Vinyl) Wall or Ceiling Plans in Life and Reliability Inspection Coverings, and of Facings and Wood Veneers Approved: 4/24/2018 ASTM E2587-2014, Practice for Use of Control Intended to be Applied on Site Over a Wood [email protected] Charts in Statistical Process Control Substrate, to Assess Surface Burning Approved: 10/21/2014 Characteristics ASTM E2557-2015, Practice for Probable [email protected] Approved: 6/23/2015 Maximum Loss (PML) Evaluations for [email protected] Earthquake Due-Diligence Assessments ASTM E2587-2015, Practice for Use of Control Approved: 12/15/2015 Charts in Statistical Process Control ASTM E2404-2017, Practice for Specimen [email protected] Approved: 4/21/2015 Preparation and Mounting of Textile, Paper [email protected] or Polymeric (Including Vinyl) and Wood Wall ASTM E2557-2016, Practice for Probable or Ceiling Coverings, Facings and Veneers, to Maximum Loss (PML) Evaluations for ASTM E2587-2016, Practice for Use of Control Assess Surface Burning Characteristics Earthquake Due-Diligence Assessments Charts in Statistical Process Control Approved: 7/25/2017 Approved: 5/17/2016 Approved: 4/19/2016 [email protected] [email protected] [email protected]

ASTM E2481-2018 (R2018), Test Method for ASTM E2563-2018, Practice for Enumeration of ASTM E2599-2015, Practice for Specimen Hot Spot Protection Testing of Photovoltaic Non-Tuberculosis Mycobacteria in Aqueous Preparation and Mounting of Reflective Modules Metalworking Fluids by Plate Count Method Insulation, Radiant Barrier and Vinyl Stretch Approved: 5/22/2018 Approved: 10/23/2028 Ceiling Materials for Building Applications to [email protected] [email protected] Assess Surface Burning Characteristics Approved: 4/21/2015 ASTM E2489-2016, Practice for Statistical ASTM E2564-2018, Practice for Enumeration of [email protected] Analysis of One-Sample and Two-Sample Mycobacteria in Metalworking Fluids by Interlaboratory Proficiency Testing Programs Direct Microscopic Counting (DMC) Method Approved: 11/15/2016 Approved: 10/23/2018 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 143 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM E2599-2016, Practice for Specimen ASTM E2657-2016, Test Method for ASTM E2693-2014, Practice for Prevention of Preparation and Mounting of Reflective Determination of Endotoxin Concentrations Dermatitis in the Wet Metal Removal Fluid Insulation, Radiant Barrier and Vinyl Stretch in Water-Miscible Metalworking Fluids Environment Ceiling Materials for Building Applications to Approved: 10/18/2016 Approved: 9/1/2014 Assess Surface Burning Characteristics [email protected] [email protected] Approved: 7/1/2016 [email protected] ASTM E2659-2015, Practice for Certificate ASTM E2694-2016, Test Method for Programs Measurement of Adenosine Triphosphate in ASTM E2599-2018, Practice for Specimen Approved: 3/1/2015 Water-Miscible Metalworking Fluids Preparation and Mounting of Reflective [email protected] Approved: 10/18/2016 Insulation, Radiant Barrier and Vinyl Stretch [email protected] Ceiling Materials for Building Applications to ASTM E2659-2017, Practice for Certificate Assess Surface Burning Characteristics Programs ASTM E2696-2009 (R2018), Practice for Life and Approved: 3/1/2018 Approved: 1/1/2017 Reliability Testing Based on the Exponential [email protected] [email protected] Distribution Approved: 12/1/2018 ASTM E2619-2017, Practice for Measuring and ASTM E2659-2018, Practice for Certificate [email protected] Calculating Building Loss Features That Take Programs Up Floor Area in Buildings Approved: 1/23/2018 ASTM E2707-2015, Test Method for Approved: 10/24/2017 [email protected] Determining Fire Penetration of Exterior Wall [email protected] Assemblies Using a Direct Flame ASTM E2685-2018 (R2019), Specification for Impingement Exposure ASTM E2632-2013, Test Method for Evaluating Steel Blades Used with the Photovoltaic Approved: 10/20/2015 the Under-Deck Fire Test Response of Deck Module Surface Cut Test [email protected] Materials Approved: 4/30/2019 Approved: 2/1/2013 [email protected] ASTM E2708-2016, Terminology for Personnel [email protected] Credentialing ASTM E2685-2018, Specification for Steel Approved: 3/15/2016 ASTM E2652-2016, Test Method for Behavior of Blades Used with the Photovoltaic Module [email protected] Materials in a Tube Furnace with a Cone- Surface Cut Test shaped Airflow Stabilizer, at 750C Approved: 1/23/2018 ASTM E2708-2017, Terminology for Approved: 1/26/2016 [email protected] Accreditation and Certification [email protected] Approved: 2/15/2017 ASTM E2688-2016, Practice for Specimen [email protected] ASTM E2652-2019, Test Method for Behavior of Preparation and Mounting of Tapes to Assess Materials in a Tube Furnace with a Cone- Surface Burning Characteristics ASTM E2708-2018, Terminology for shaped Airflow Stabilizer, at 750C Approved: 8/9/2016 Accreditation and Certification Approved: 12/15/2018 [email protected] Approved: 4/1/2018 [email protected] [email protected] ASTM E2688-2018, Practice for Specimen ASTM E2653-2014, Practice for Conducting an Preparation and Mounting of Tapes to Assess ASTM E2708-2018, Terminology for Interlaboratory Study to Determine Precision Surface Burning Characteristics Accreditation and Certification Estimates for a Fire Test Method with Fewer Approved: 3/1/2018 Approved: 7/1/2018 Than Six Participating Laboratories [email protected] [email protected] Approved: 12/1/2014 [email protected] ASTM E2690-2017, Practice for Specimen ASTM E2709-2014, Practice for Demonstrating Preparation and Mounting of Caulks and Capability to Comply with an Acceptance ASTM E2653-2015, Practice for Conducting an Sealants to Assess Surface Burning Procedure Interlaboratory Study to Determine Precision Characteristics Approved: 10/21/2014 Estimates for a Fire Test Method with Fewer Approved: 5/15/2017 [email protected] Than Six Participating Laboratories [email protected] Approved: 7/1/2015 ASTM E2709-2019, Practice for Demonstrating [email protected] ASTM E2690-2017a, Practice for Specimen Capability to Comply with an Acceptance Preparation and Mounting of Caulks and Procedure ASTM E2655-2014, Guide for Reporting Sealants to Assess Surface Burning Approved: 4/30/2019 Uncertainty of Test Results and Use of the Characteristics [email protected] Term Measurement Uncertainty in ASTM Approved: 7/25/2017 Test Methods [email protected] ASTM E2726-2012a (R2017), Test Method for Approved: 10/21/2014 Evaluating the Fire-Test-Response of Deck [email protected] ASTM E2690-2017b, Practice for Specimen Structures to Burning Brands Preparation and Mounting of Caulks and Approved: 12/15/2017 Sealants to Assess Surface Burning [email protected] Characteristics Approved: 11/21/2017 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 144 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM E2730-2017, Practice for Calibration and ASTM E2816-2015, Test Methods for Fire ASTM E2846-2017, Guide for Thermocouple Use of Thermocouple Reference Junction Resistive Metallic HVAC Duct Systems Verification Probes in Evaluation of Electronic Reference Approved: 10/20/2015 Approved: 12/26/2017 Junction Compensation Circuits [email protected] [email protected] Approved: 12/26/2017 [email protected] ASTM E2816-2017, Test Methods for Fire ASTM E2848-2018 (R2018), Test Method for Resistive Metallic HVAC Duct Systems Reporting Photovoltaic Non-Concentrator ASTM E2748-2017, Guide for Fire-Resistance Approved: 7/1/2017 System Performance Experiments [email protected] Approved: 5/22/2018 Approved: 1/17/2017 [email protected] [email protected] ASTM E2816-2018, Test Methods for Fire Resistive Metallic HVAC Duct Systems ASTM E2849-2013, Practice for Professional ASTM E2749-2010 (R2019), Practice for Approved: 2/1/2018 Certification Performance Testing Measuring the Uniformity of Furnace [email protected] Approved: 12/24/2013 Exposure on Test Specimens [email protected] Approved: 4/30/2019 ASTM E2816-2018a, Test Methods for Fire [email protected] Resistive Metallic HVAC Duct Systems ASTM E2849-2018, Practice for Professional Approved: 3/15/2018 Certification Performance Testing ASTM E2749-2015, Practice for Measuring the [email protected] Approved: 11/20/2018 Uniformity of Furnace Exposure on Test [email protected] Specimens ASTM E2816-2018b, Test Methods for Fire Approved: 6/23/2015 Resistive Metallic HVAC Duct Systems ASTM E2874-2019, Test Method For [email protected] Approved: 4/24/2018 Determining the Fire Performance of Building [email protected] Perimeter Containment Systems Due to ASTM E2750-2017, Guide for Extension of Data External Spread of Fire from Penetration Firestop System Tests ASTM E2816-2018c, Test Methods for Fire Approved: 2/1/2019 Conducted in Accordance with ASTM Resistive Metallic HVAC Duct Systems [email protected] Approved: 11/21/2017 Approved: 6/1/2018 [email protected] [email protected] ASTM E2886-2014, Test Method for Evaluating the Ability of Exterior Vents to Resist the ASTM E2762-2010 (R2014), Practice for ASTM E2819-2011 (R2015), Practice for Single- Entry of Embers and Direct Flame Sampling a Stream of Product by Variables and Multi-Level Continuous Sampling of a Impingement Indexed by AQL Stream of Product by Attributes Indexed by Approved: 5/20/2014 Approved: 4/22/2014 AQL [email protected] [email protected] Approved: 5/15/2015 [email protected] ASTM E2889-2012 (R2017), Practice for Control ASTM E2766-2018 (R2019), Practice for of Respiratory Hazards in the Metal Removal Installation of Roof Mounted Photovoltaic ASTM E2820-2017 (R2019), Test Method for Fluid Environment Arrays on Steep-Slope Roofs Evaluating Thermal EMF Properties of Base- Approved: 10/14/2017 Approved: 4/30/2019 Metal Thermocouple Connectors [email protected] [email protected] Approved: 5/21/2019 [email protected] ASTM E29-2013 (R2019), Practice for Using ASTM E2766-2018, Practice for Installation of Significant Digits in Test Data to Determine Roof Mounted Photovoltaic Arrays on Steep- ASTM E2820-2017, Test Method for Evaluating Conformance with Specifications Slope Roofs Thermal EMF Properties of Base-Metal Approved: 1/22/2019 Approved: 1/23/2018 Thermocouple Connectors [email protected] [email protected] Approved: 12/26/2017 [email protected] ASTM E2908-2018 (R2018), Guide for Fire ASTM E2768-2018, Test Method for Extended Prevention for Photovoltaic Panels, Modules, Duration Surface Burning Characteristics of ASTM E2833-2012 (R2018), Practice for and Systems Building Materials (30 min Tunnel Test) Certification Bodies that Certify Personnel Approved: 5/22/2018 Approved: 8/1/2018 Engaged in Inspection and Testing of [email protected] [email protected] Construction Activities and Materials Used in Construction, Including Special Inspection ASTM E2910-2012 (R2018), Guide for Preferred ASTM E2782-2017, Guide for Measurement Approved: 3/20/2018 Methods for Acceptance of Product Systems Analysis (MSA) [email protected] Approved: 4/24/2018 Approved: 1/1/2017 [email protected] [email protected] ASTM E2837-2013 (R2017), Test Method for Determining the Fire Resistance of Continuity ASTM E2912-2017, Test Method for Fire Test of ASTM E2816-2015, Test Methods for Fire Head-of-Wall Joint Systems Installed Non-Mechanical Fire Dampers Used in Resistive Metallic HVAC Duct Systems Between Rated Wall Assemblies and Vented Construction Approved: 1/20/2015 Nonrated Horizontal Assemblies Approved: 8/1/2017 [email protected] Approved: 4/28/2017 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 145 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM E2935-2015, Practice for Conducting ASTM E2988-2015a, Practice for Specimen ASTM E3021-2015 (R2019), Guide for Equivalence Testing in Laboratory Preparation and Mounting of Flexible Fibrous Evaluating the Relative Effectiveness of Applications Glass Insulation for Metal Buildings to Assess Building Systems to Resist the Passage of Approved: 10/20/2015 Surface Burning Characteristics Products of Combustion Based on the [email protected] Approved: 7/28/2015 Aggregation of Leakage Rates [email protected] Approved: 4/30/2019 ASTM E2935-2016, Practice for Conducting [email protected] Equivalence Testing in Laboratory ASTM E2988-2017, Practice for Specimen Applications Preparation and Mounting of Flexible Fibrous ASTM E3021-2015, Guide for Evaluating the Approved: 11/22/2016 Glass Insulation for Metal Buildings to Assess Relative Effectiveness of Building Systems to [email protected] Surface Burning Characteristics Resist the Passage of Products of Combustion Approved: 11/21/2017 Based on the Aggregation of Leakage Rates1 ASTM E2935-2017, Practice for Conducting [email protected] Approved: 8/1/2015 Equivalence Testing in Laboratory [email protected] Applications ASTM E2989-2015, Guide ForAssessment of Approved: 10/24/2017 Continued Applicability of Fire Test Reports ASTM E3048-2017, Test Method for [email protected] Used in Building Regulation Determination of Time to Burn-Through Approved: 2/1/2015 Using the Intermediate Scale Calorimeter ASTM E2939-2018 (R2018), Practice for [email protected] (ICAL) Radiant Panel Determining Reporting Conditions and Approved: 9/1/2017 Expected Capacity for Photovoltaic Non- ASTM E2989-2015a, Guide for Assessment of [email protected] Concentrator Systems Continued Applicability of Fire Test Reports Approved: 5/22/2018 Used in Building Regulation ASTM E3048-2019, Test Method for [email protected] Approved: 8/1/2015 Determination of Time to Burn-Through [email protected] Using the Intermediate Scale Calorimeter ASTM E2957-2015, Test Method for (ICAL) Radiant Panel Flammability and Resistance of Eaves, Soffits ASTM E2989-2019, Guide for Assessment of Approved: 3/1/2019 and Other Horizontal Projections to Fire Continued Applicability of Fire Test Reports [email protected] Penetration Used in Building Regulation Approved: 7/28/2015 Approved: 5/1/2019 ASTM E3048-2019, Test Method for [email protected] [email protected] Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter ASTM E2957-2017, Test Method for Resistance ASTM E3006-2018, Practice for Ultraviolet (ICAL) Radiant Panel to Wildfire Penetration of Eaves, Soffits and Conditioning of Photovoltaic Modules or Approved: 2/1/2019 Other Projections Mini-Modules Using a Fluorescent Ultraviolet [email protected] Approved: 5/1/2017 (UV) Lamp Apparatus [email protected] Approved: 1/23/2018 ASTM E3075-2018, Test Method for Water [email protected] Immersion and Drying for Evaluation of Flood ASTM E2965-2015, Test Method for Damage Resistance Determination of Low Levels Heat Release ASTM E3010-2015 (R2019), Practice for Approved: 6/12/2018 Rate for Materials and Products Using an Installation, Commissioning, Operation, and [email protected] Oxygen Consumption Calorimeter Maintenance Process (ICOMP) of Approved: 8/1/2015 Photovoltaic Arrays ASTM E3075-2018, Test Method for Water [email protected] Approved: 4/30/2019 Immersion and Drying for Evaluation of Flood [email protected] Damage Resistance ASTM E2965-2016, Test Method for Approved: 11/20/2018 Determination of Low Levels Heat Release ASTM E3010-2015, Practice for Installation, [email protected] Rate for Materials and Products Using an Commissioning, Operation and Maintenance Oxygen Consumption Calorimeter Process (ICOMP) of Photovoltaic Arrays ASTM E3080-2017, Practice for Regression Approved: 1/26/2016 Approved: 4/21/2015 Analysis [email protected] [email protected] Approved: 11/21/2017 [email protected] ASTM E2965-2016a, Test Method for ASTM E3020-2015, Practice for Ignition Sources Determination of Low Levels of Heat Release Approved: 8/1/2015 ASTM E3082-2017, Test Methods Rate for Materials and Products Using an [email protected] ForDetermining the Effectiveness of Fire Oxygen Consumption Calorimeter Retardant Treatments for Natural Christmas Approved: 9/20/2016 ASTM E3020-2016, Practice for Ignition Sources Trees [email protected] Approved: 6/21/2016 Approved: 7/25/2017 [email protected] [email protected] ASTM E2965-2017, Test Method for Determination of Low Levels of Heat Release ASTM E3020-2016a, Practice for Ignition Rate for Materials and Products Using an Sources Oxygen Consumption Calorimeter Approved: 9/20/2016 Approved: 8/1/2017 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 146 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM E3134-2017, Specification ASTM E601-2017, Guide for Measuring ASTM E662-2017a, Test Method for Specific ForTransportation Tunnel Structural Electromotive Force (emf) Stability of Base- Optical Density of Smoke Generated by Solid Components and Passive Fire Protection Metal Thermoelement Materials with Time in Materials Systems Air Approved: 7/25/2017 Approved: 12/26/2017 Approved: 12/26/2017 [email protected] [email protected] [email protected] ASTM E662-2019, Test Method for Specific ASTM E3159-2018, Guide ToGeneral Reliability ASTM E603-2017, Guide for Room Fire Optical Density of Smoke Generated by Solid Approved: 4/24/2018 Experiments Materials [email protected] Approved: 7/25/2017 Approved: 12/18/2018 [email protected] [email protected] ASTM E329-2018, Specification for Agencies Engaged in Construction Inspection, Testing, ASTM E608-2017, Specification for Mineral- ASTM E662-2019, Test Method for Specific or Special Inspection Insulated, Metal-Sheathed Base Metal Optical Density of Smoke Generated by Solid Approved: 1/23/2018 Thermocouples Materials [email protected] Approved: 12/26/2017 Approved: 9/1/2019 [email protected] [email protected] ASTM E452-2017 (R2018), Test Method for Calibration of Refractory Metal ASTM E608-2019, Specification for Mineral- ASTM E691-2015, Practice for Conducting an Thermocouples Using a Radiation Insulated, Metal-Sheathed Base Metal Interlaboratory Study to Determine the Thermometer Thermocouples Precision of a Test Method Approved: 4/24/2018 Approved: 5/21/2019 Approved: 10/20/2015 [email protected] [email protected] [email protected]

ASTM E456-2013a (R2017), Terminology ASTM E648-2015, Test Method for Critical ASTM E691-2016, Practice for Conducting an Relating to Quality and Statistics Radiant Flux of Floor-Covering Systems Using Interlaboratory Study to Determine the Approved: 10/24/2017 a Radiant Heat Energy Source Precision of a Test Method [email protected] Approved: 7/28/2015 Approved: 10/18/2016 [email protected] [email protected] ASTM E535-2014, Practice for Preparation of Fire-Test-Response Standards ASTM E648-2017, Test Method for Critical ASTM E691-2018, Practice for Conducting an Approved: 5/1/2014 Radiant Flux of Floor-Covering Systems Using Interlaboratory Study to Determine the [email protected] a Radiant Heat Energy Source Precision of a Test Method Approved: 4/28/2017 Approved: 4/24/2018 ASTM E535-2019, Practice for Preparation of [email protected] [email protected] Fire-Test-Response Standards Approved: 7/23/2019 ASTM E648-2017a, Test Method for Critical ASTM E696-2017 (R2018), Specification for [email protected] Radiant Flux of Floor-Covering Systems Using Tungsten-Rhenium Alloy Thermocouple Wire a Radiant Heat Energy Source Approved: 11/20/2018 ASTM E541-2010, Specification for Agencies Approved: 12/26/2017 [email protected] Engaged in System Analysis and Compliance [email protected] Assurance for Manufactured Building ASTM E696-2017, Specification for Tungsten- Approved: 5/25/2010 ASTM E648-2019, Test Method for Critical Rhenium Alloy Thermocouple Wire [email protected] Radiant Flux of Floor-Covering Systems Using Approved: 12/26/2017 a Radiant Heat Energy Source [email protected] ASTM E574-2017, Specification for Duplex, Base Approved: 7/23/2019 Metal Thermocouple Wire With Glass Fiber [email protected] ASTM E699-2016, Practice for Evaluation of or Silica Fiber Insulation Agencies Involved in Testing, Quality Approved: 12/26/2017 ASTM E662-2015, Test Method for Specific Assurance, and Evaluating of Building [email protected] Optical Density of Smoke Generated by Solid Components Materials Approved: 8/1/2016 ASTM E574-2019, Specification for Duplex, Base Approved: 11/17/2015 [email protected] Metal Thermocouple Wire With Glass Fiber [email protected] or Silica Fiber Insulation ASTM E780-2017, Test Method for Measuring Approved: 5/21/2019 ASTM E662-2015a, Test Method for Specific the Insulation Resistance of Mineral- [email protected] Optical Density of Smoke Generated by Solid Insulated, Metal-Sheathed Thermocouples Materials and Mineral-Insulated, Metal-Sheathed Cable ASTM E585-2018, Specification for Compacted Approved: 4/21/2015 at Room Temperature Mineral-Insulated, Metal-Sheathed, Base [email protected] Approved: 12/26/2017 Metal Thermocouple Cable [email protected] Approved: 6/1/2018 ASTM E662-2017, Test Method for Specific [email protected] Optical Density of Smoke Generated by Solid ASTM E8-2015, Test Methods for Tension Materials Testing of Metallic Materials Approved: 2/1/2017 Approved: 2/1/2015 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 147 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM E8-2015a, Test Methods for Tension ASTM E84-2018, Test Method for Surface ASTM F1006-1997 (R2014), Specification for Testing of Metallic Materials Burning Characteristics of Building Materials Entrainment Separators for Use in Marine Approved: 5/26/2015 Approved: 7/1/2018 Piping Applications [email protected] [email protected] Approved: 11/25/2014 [email protected] ASTM E8-2016, Test Methods for Tension ASTM E84-2018, Test Method for Surface Testing of Metallic Materials Burning Characteristics of Building Materials ASTM F1006-1997 (R2018), Specification for Approved: 7/15/2016 Approved: 10/1/2018 Entrainment Separators for Use in Marine [email protected] [email protected] Piping Applications Approved: 9/1/2018 ASTM E8-2016a, Test Methods for Tension ASTM E84-2019, Test Method for Surface [email protected] Testing of Metallic Materials Burning Characteristics of Building Materials Approved: 8/1/2016 Approved: 3/1/2019 ASTM F1007-2018, Specification for Pipeline [email protected] [email protected] Expansion Joints of the Packed Slip Type for Marine Application ASTM E800-2014, Guide for Measurement of ASTM E84-2019, Test Method for Surface Approved: 5/22/2018 Gases Present or Generated During Fires Burning Characteristics of Building Materials [email protected] Approved: 11/25/2014 Approved: 4/15/2019 [email protected] [email protected] ASTM F1014-2002 (R2012), Specification for Flashlights on Vessels ASTM E814-2013 (R2017), Test Method for Fire ASTM E84-2019, Test Method for Surface Approved: 10/23/2012 Tests of Penetration Firestop Systems Burning Characteristics of Building Materials [email protected] Approved: 4/28/2017 Approved: 7/23/2019 [email protected] [email protected] ASTM F1015-2003 (R2017), Test Method for Relative Abrasiveness of Synthetic Turf ASTM E839-2017, Test Methods for Sheathed BSR/ASTM E84-2016, Test Method for Surface Playing Surfaces Thermocouples and Sheathed Thermocouple Burning Characteristics of Building Materials Approved: 12/26/2017 Cable Approved: 7/1/2016 [email protected] Approved: 12/26/2017 [email protected] [email protected] ASTM F1018-87A (R2017), Specification for ASTM E906/E906M-2017, Test Method for Heat Steel Emergency Gear Stowage Locker ASTM E84-2015, Test Method for Surface and Visible Smoke Release Rates for Approved: 1/1/2017 Burning Characteristics of Building Materials Materials and Products Using a Thermopile [email protected] Approved: 2/1/2015 Method [email protected] Approved: 8/1/2017 ASTM F1019M-2001 (R2018), Specification for [email protected] Steel Deck Gear Stowage Box [Metric] ASTM E84-2015, Test Method for Surface Approved: 4/24/2018 Burning Characteristics of Building Materials ASTM E927-2019, Specification for Solar [email protected] Approved: 4/21/2015 Simulation for Photovoltaic Testing [email protected] Approved: 2/1/2019 ASTM F1020-1986 (R2018), Specification for [email protected] Line-Blind Valves for Marine Applications ASTM E84-2015a, Test Method for Surface Approved: 3/20/2018 Burning Characteristics of Building Materials ASTM E970-2017, Test Method for Critical [email protected] Approved: 12/15/2015 Radiant Flux of Exposed Attic Floor Insulation [email protected] Using a Radiant Heat Energy Source ASTM F1021-2019, Specification for Feeders, Approved: 7/1/2017 Detergent, Rinse Agent, and Sanitizing Agent ASTM E84-2016, Test Method for Surface [email protected] for Commercial Dishwashing and Burning Characteristics of Building Materials Glasswashing Machines Approved: 7/1/2016 ASTM F1000-2013 (R2019), Practice for Piping Approved: 12/18/2018 [email protected] System Drawing Symbols [email protected] Approved: 5/21/2019 ASTM E84-2017, Test Method for Surface [email protected] ASTM F1023-2012 (R2018), Specification for Burning Characteristics of Building Materials Dispensers, Powdered Iced Tea Approved: 8/1/2017 ASTM F1003-2019, Specification for Approved: 10/23/2018 [email protected] Searchlights on Motor Lifeboats [email protected] Approved: 3/26/2019 ASTM E84-2017a, Test Method for Surface [email protected] ASTM F1025-2019, Guide for Selection and Use Burning Characteristics of Building Materials of Full-Encirclement-Type Band Clamps for Approved: 11/21/2017 ASTM F1005-1997 (R2013), Practice for HVAC Reinforcement or Repair of Punctures or [email protected] Duct Shapes; Identification and Description Holes in Polyethylene Gas Pressure Pipe of Design Configuration Approved: 8/20/2019 ASTM E84-2018, Test Method for Surface Approved: 10/29/2013 [email protected] Burning Characteristics of Building Materials [email protected] Approved: 3/1/2017 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 148 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F1030-1986 (R2014), Practice for ASTM F1068-1990 (R2018), Specification for ASTM F1085-2014, Specification for Mattress Selection of Valve Operators Doors, Double, Gastight/Airtight, Individually and Box Springs for Use in Berths in Marine Approved: 11/25/2014 Dogged, for Marine Use Vessels [email protected] Approved: 4/24/2018 Approved: 11/25/2014 [email protected] [email protected] ASTM F1030-1986 (R2018), Practice for Selection of Valve Operators ASTM F1069-2019, Specification for Doors, ASTM F1092-2014, Specification for Fiberglass Approved: 9/1/2018 Watertight, Gastight/Airtight and (GRP) Pultruded Open-Weather Storm and [email protected] Weathertight, Individually Dogged, for Guard, Square Railing Systems Marine Use Approved: 11/25/2014 ASTM F1038-1999 (R2016), Test Method for Approved: 3/26/2019 [email protected] Motor Life Evaluation of a Canister, Hand- [email protected] held, Stick, and Utility Type Vacuum Cleaner ASTM F1097-2017, Specification for Mortar, Without a Driven Agitator ASTM F1070-2019, Specification for Doors, Refractory (High-Temperature, Air-Setting) Approved: 10/18/2016 Non-Tight, for Marine Use Approved: 12/26/2017 [email protected] Approved: 3/26/2019 [email protected] [email protected] ASTM F1041-2017, Guide for Squeeze-Off of ASTM F1098-2010 (R2015), Specification for Polyolefin Gas Pressure Pipe and Tubing ASTM F1071-1994 (R2018), Specification for Envelope Dimensions for Butterfly Valves-- Approved: 5/30/2017 Expanded-Metal Bulkhead Panels NPS 2 to 24 [email protected] Approved: 4/24/2018 Approved: 5/26/2015 [email protected] [email protected] ASTM F1045-2015, Performance Specification for Ice Hockey Helmets ASTM F1072-1994 (R2018), Specification for ASTM F1099M-2018, Specification for Rat Approved: 4/21/2015 Expanded-Metal Doors Guards, Ships (Metric) [email protected] Approved: 4/24/2018 Approved: 4/24/2018 [email protected] [email protected] ASTM F1045-2016, Performance Specification for Ice Hockey Helmets ASTM F1073-2019, Specification for Door ASTM F1106-87 (R2018), Specification for Approved: 10/18/2016 Fittings, for Watertight /Gastight /Airtight, Warping Heads, Rope Handling (Gypsy Head, [email protected] Weathertight, and Non-Tight Doors, for Capstan Head) Marine Use Approved: 4/24/2018 ASTM F1047-2017, Specification for Frying and Approved: 3/26/2019 [email protected] Braising Pans, Tilting Type [email protected] Approved: 12/26/2017 ASTM F1114-2016, Specification for Heat [email protected] ASTM F1074-1997 (R2018), Specification for Sanitizing Commercial Pot, Pan, and Utensil Cleats, Welded Horn Type Stationary Rack Type Water-Driven Rotary ASTM F1055-2016, Specification for Approved: 4/24/2018 Spray Electrofusion Type Polyethylene Fittings for [email protected] Approved: 12/20/2016 Outside Diameter Controlled Polyethylene [email protected] and Crosslinked Polyethylene (PEX) Pipe and ASTM F1075-1997 (R2014), Specification for Tubing Dehumidifier, Shipboard, Mechanically ASTM F1120-2010 (R2015), Specification for Approved: 8/23/2016 Refrigerated, Self-Contained Circular Metallic Bellows Type Expansion [email protected] Approved: 11/25/2014 Joints for Piping Applications [email protected] Approved: 5/26/2015 ASTM F1055-2016a, Specification for [email protected] Electrofusion Type Polyethylene Fittings for ASTM F1075-1997 (R2018), Specification for Outside Diameter Controlled Polyethylene Dehumidifier, Shipboard, Mechanically ASTM F1121-2010 (R2015), Specification for and Crosslinked Polyethylene (PEX) Pipe and Refrigerated, Self-Contained International Shore Connections for Marine Tubing Approved: 9/1/2018 Fire Applications Approved: 11/22/2016 [email protected] Approved: 5/26/2015 [email protected] [email protected] ASTM F1076-2010 (R2015), Practice for ASTM F1056-2017, Specification for Socket Expanded Welded and Silver Brazed Socket ASTM F1122-2010 (R2015), Specification for Fusion Tools for Use in Socket Fusion Joining Joints for Pipe and Tube Quick Disconnect Couplings (6 in. NPS and Polyethylene Pipe or Tubing and Fittings Approved: 5/26/2015 Smaller) Approved: 5/31/2017 [email protected] Approved: 5/26/2015 [email protected] [email protected] ASTM F1081-2009 (R2015), Specification for ASTM F1056-2018, Specification for Socket Competition Wrestling Mats ASTM F1123-2010 (R2015), Specification for Fusion Tools for Use in Socket Fusion Joining Approved: 4/21/2015 Non-Metallic Expansion Joints Polyethylene Pipe or Tubing and Fittings [email protected] Approved: 5/26/2015 Approved: 2/20/2018 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 149 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F1126-2012 (R2017), Specification for ASTM F1155-2010 (R2015), Practice for ASTM F1198-1997 (R2018), Guide for Shipboard Food Cutters (Electric) Selection and Application of Piping System Fire Detection Systems Approved: 12/26/2017 Materials Approved: 10/1/2018 [email protected] Approved: 5/26/2015 [email protected] [email protected] ASTM F1130-2000 (R2014), Practice for ASTM F1199-2010 (R2015), Specification for Inspecting the Coating System of a Ship ASTM F1162-2018, Specification for Pole Vault Cast (All Temperatures and Pressures) and Approved: 1/21/2014 Landing Systems Welded Pipe Line Strainers (150 psig and [email protected] Approved: 4/24/2018 150F Maximum) [email protected] Approved: 5/26/2015 ASTM F1134-2015 (R2019), Specification for [email protected] Insulation Resistance Monitor for Shipboard ASTM F1163-2015, Specification for Protective Electrical Motors and Generators Headgear Used in Horse Sports and ASTM F1200-1988 (R2016), Specification for Approved: 7/23/2019 Horseback Riding Fabricated (Welded) Pipe Line Strainers [email protected] Approved: 10/20/2015 (Above 150 psig and 150F) [email protected] Approved: 9/1/2016 ASTM F1134-2015, Specification for Insulation [email protected] Resistance Monitor for Shipboard Electrical ASTM F1166-2007 (R2013), Practice for Human Motors and Generators Engineering Design for Marine Systems, ASTM F1201-1988 (R2016), Specification for Approved: 5/26/2015 Equipment, and Facilities Fluid Conditioner Fittings in Piping o [email protected] Approved: 10/29/2013 Applications above 0 F [email protected] Approved: 9/1/2016 ASTM F1138-1998 (R2014), Specification for [email protected] Spray Shields for Mechanical Joints ASTM F1172-2010 (R2015), Specification for Approved: 2/1/2014 Fuel Oil Meters of the Volumetric Positive ASTM F1202-2016, Specification for Washing [email protected] Displacement Type Machines, Heat Sanitizing, Commercial, Pot, Approved: 5/26/2015 Pan, and Utensil Vertically Oscillating Arm ASTM F1139-2010 (R2015), Specification for [email protected] Type Steam Traps and Drains Approved: 12/20/2016 Approved: 5/26/2015 ASTM F1173-2001 (R2018), Specification for [email protected] [email protected] Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications ASTM F1203-2016, Specification for Washing ASTM F1142-1990 (R2012), Specification for Approved: 3/20/2018 Machines--Pot, Pan, and Utensil, Heat Manhole Cover Assembly, Bolted, Semi- [email protected] Sanitizing, Commercial Rotary Conveyor Type Flush, Oiltight and Watertight Approved: 12/20/2016 Approved: 6/26/2012 ASTM F1178-2011 (R2015), Specification for [email protected] [email protected] Performance of Enameling System, Baking, Metal Joiner Work and Furniture ASTM F1207M-2012 (R2018), Specification for ASTM F1143-2019, Specification for Manhole Approved: 10/20/2015 Electrical Insulation Monitors for Monitoring Cover Assembly, Bolted, Raised, Oiltight and [email protected] Ground Resistance in Active Electrical Watertight Systems [Metric] Approved: 3/26/2019 ASTM F1179-1997 (R2014), Practice for Approved: 4/24/2018 [email protected] Inspection Procedure for Use of Anaerobic [email protected] Thread Locking Compounds with Studs ASTM F1144-2019, Specification for Manhole Approved: 3/1/2014 ASTM F1217-2017, Specification for Cooker, Cover Assembly, Bolted, Semi-Flush, Oiltight [email protected] Steam and Watertight, Hinged Approved: 11/21/2017 Approved: 3/26/2019 ASTM F1182-2007 (R2013), Specification for [email protected] [email protected] Anodes, Sacrificial Zinc Alloy Approved: 10/29/2013 ASTM F1237-2015, Specification for ASTM F1145-1992 (R2017), Specification for [email protected] Commercial Dishwashing Machines, Multiple- Turnbuckles, Swaged, Welded, Forged Tank, Continuous Oval-Conveyor Type, Heat Approved: 12/26/2017 ASTM F1196-2019, Specification for Sliding Sanitizing [email protected] Watertight Door Assemblies Approved: 9/18/2015 Approved: 3/26/2019 [email protected] ASTM F1150-2016, Specification for [email protected] Commercial Food Waste Pulper and ASTM F1244-2000 (R2018), Specification for Waterpress Assembly ASTM F1197-2019, Specification for Sliding Berths, Marine Approved: 12/20/2016 Watertight Door Control Systems Approved: 4/24/2018 [email protected] Approved: 3/26/2019 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 150 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F1245-1989 (R2012), Standard ASTM F1292-2017, Specification for Impact ASTM F1326-2011 (R2016), Test Method for Specification for Faucets, Single And Double, Attenuation of Surfacing Materials Within the Measuring Maximum Dry Volume of Utility Compression and Self-Closing Type, Use Zone of Playground Equipment Vacuum Cleaners Shipboard Approved: 5/1/2017 Approved: 4/19/2016 Approved: 5/22/2012 [email protected] [email protected] [email protected] ASTM F1292-2017a, Specification for Impact ASTM F1330-1991 (R2018), Guide for Metallic ASTM F1250-2018, Specification for Stationary Attenuation of Surfacing Materials Within the Abrasive Blasting to Descale the Interior of Upright and Recumbent Exercise Bicycles and Use Zone of Playground Equipment Pipe Upper Body Ergometers Approved: 10/1/2017 Approved: 3/20/2018 Approved: 6/26/2018 [email protected] [email protected] [email protected] ASTM F1292-2018, Specification for Impact ASTM F1331-2017, Practice for Installation ASTM F1270-1997 (R2013), Practice for Attenuation of Surfacing Materials Within the Procedures of Vinyl Deck Coverings on Preparing and Locating Emergency Muster Use Zone of Playground Equipment Portable Plates in Electrical and Electronic Lists Approved: 12/1/2018 Spaces Approved: 10/29/2013 [email protected] Approved: 5/23/2017 [email protected] [email protected] ASTM F1297-1999 (R2018), Guide for Location ASTM F1271-1990 (R2018), Specification for and Instruction Symbols for Evacuation and ASTM F1332-1999 (R2011), Practice for Use of Spill Valves for Use in Marine Tank Liquid Lifesaving Equipment SI (Metric) Units in Maritime Applications Overpressure Protections Applications Approved: 10/1/2018 (Committee F25 Supplement to IEEE/ASTM SI Approved: 3/20/2018 [email protected] 10) [email protected] Approved: 5/24/2011 ASTM F1298-1990 (R2018), Specification for [email protected] ASTM F1273-1997 (R2013), Specification for Flexible, Expansion-Type Ball Joints for Tank Vest Flame Arresters Marine Applications ASTM F1333-1997 (R2013), Specification for Approved: 10/29/2013 Approved: 3/20/2018 Construction of Fire and Foam Station [email protected] [email protected] Cabinets Approved: 10/29/2013 ASTM F1275-2014, Test Method for ASTM F1309-1998 (R2018), Practice for [email protected] Performance of Griddles Installation Procedures for Fitting Chocks to Approved: 4/22/2014 Marine Machinery Foundations ASTM F1334-2018, Test Method for [email protected] Approved: 4/24/2018 Determining A-Weighted Sound Power Level [email protected] of Vacuum Cleaners ASTM F1281-2017, Specification for Crosslinked Approved: 10/23/2018 Polyethylene/Aluminum/Crosslinked ASTM F1311-1990 (R2018), Specification for [email protected] Polyethylene (PEX-AL-PEX) Pressure Pipe Large-Diameter Fabricated Carbon Steel Approved: 8/22/2017 Flanges ASTM F1337-2010 (R2015), Practice for Human [email protected] Approved: 3/20/2018 Systems Integration Program Requirements [email protected] for Ships and Marine Systems, Equipment, ASTM F1282-2017, Specification for and Facilities Polyethylene/Aluminum/Polyethylene (PE- ASTM F1312-90 (R2013), Specification for Brick, Approved: 5/26/2015 AL-PE) Composite Pressure Pipe Insulating, High Temperature, Fire Clay [email protected] Approved: 3/28/2017 Approved: 10/29/2013 [email protected] [email protected] ASTM F1338-1997 (R2013), Guide for Main Propulsion Medium Speed Marine Diesel ASTM F1284-2009 (R2016), Test Method for ASTM F1321-2014, Guide for Conducting a Engines Covering Performance and Minimum Evaluating Carpet Embedded Dirt Removal Stability Test (Lightweight Survey and Scope of Assembly Effectiveness of Residential Central Vacuum Inclining Experiment) to Determine the Light Approved: 10/29/2013 Cleaning Systems Ship Displacement and Centers of Gravity of [email protected] Approved: 6/14/2016 a Vessel [email protected] Approved: 5/20/2014 ASTM F1347-1991 (R2018), Specification for [email protected] Manually Operated Fueling Hose Reels ASTM F1290-2017, Practice for Electrofusion Approved: 10/1/2018 Joining Polyolefin Pipe and Fittings ASTM F1322-2015, Guide for Selection of [email protected] Approved: 5/31/2017 Shipboard Incinerators [email protected] Approved: 5/26/2015 ASTM F1348-1997 (R2013), Specification for [email protected] Pneumatic Rotary Descaling Machines ASTM F1290-2019, Practice for Electrofusion Approved: 10/29/2013 Joining Polyolefin Pipe and Fittings ASTM F1323-2014, Specification for Shipboard [email protected] Approved: 1/22/2019 Incinerators [email protected] Approved: 11/25/2014 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 151 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F1352-2008 (R2013), GUIDE FOR FIXED ASTM F1411-2011 (R2018), Practice for ASTM F1483-2017, Specification for Oriented BLADE BROADHEAD PERFORMANCE AND Presenting Selected Information on Vacuum Poly(Vinyl Chloride), PVCO, Pressure Pipe SAFETY STANDARDS Cleaners for Consumer Use Approved: 8/1/2017 Approved: 05/21/2013 Approved: 3/20/2018 [email protected] [email protected] [email protected] ASTM F1484-2015, Test Methods for ASTM F1360-2017, Specification for Ovens, ASTM F1412-2017, Specification for Polyolefin Performance of Steam Cookers Microwave, Electric Pipe and Fittings for Corrosive Waste Approved: 11/17/2015 Approved: 11/21/2017 Drainage Systems [email protected] [email protected] Approved: 5/30/2017 [email protected] ASTM F1484-2018, Test Methods for ASTM F1361-2017, Test Method for Performance of Steam Cookers Performance of Open Deep Fat Fryers ASTM F1431-1992 (R2016), Specification for Approved: 3/20/2018 Approved: 11/21/2017 Water Trap for Diesel Exhaust [email protected] [email protected] Approved: 9/1/2016 [email protected] ASTM F1488-2017 (R2019), Specification for ASTM F1363-2007 (R2017), Guide for Reduction Coextruded Composite Pipe of Risk of Injury for Archery Overdraws ASTM F1433-1997 (R2010), Specification for Approved: 3/5/2019 Approved: 12/26/2017 Mechanically Refrigerated Air Conditioner [email protected] [email protected] Approved: 5/25/2010 [email protected] ASTM F1488-2017, Specification for Coextruded ASTM F1370-1992 (R2019), Specification for Composite Pipe Pressure-Reducing Valves for Water Systems, ASTM F1435-2008 (R2013), SPECIFICATION FOR Approved: 5/31/2017 Shipboard DESIGNATION OF THE BALANCE POINT [email protected] Approved: 8/1/2019 LOCATION FOR ARCHERY ARROWS [email protected] Approved: 05/21/2013 ASTM F1492-2008 (R2014), Specification for [email protected] Helmets Used in Skateboarding and Trick ASTM F1371-2013 (R2019), Specification for Roller Skating Vegetable Peeling Machines, Electric ASTM F1436-2011 (R2017), Guide for Center Approved: 12/23/2014 Approved: 12/18/2018 Serving Diameter Dimensions for Archery [email protected] [email protected] Bow Strings Approved: 12/26/2017 ASTM F1492-2015, Specification for Helmets ASTM F1385-2006 (R2018), Practice for [email protected] Used in Skateboarding and Trick Roller Platforms in Cargo Tanks Skating Approved: 4/24/2018 ASTM F1446-2015, Test Methods for Approved: 7/1/2015 [email protected] Equipment and Procedures Used in [email protected] Evaluating the Performance Characteristics of ASTM F1386-1997 (R2016), Guide for Protective Headgear ASTM F1495-2014, Specification for Construction of Sounding Tube and Striker Approved: 6/23/2015 Combination Oven Electric or Gas Fired Plate for Tank Sounding [email protected] Approved: 1/21/2014 Approved: 9/1/2016 [email protected] [email protected] ASTM F1446-2015a, Test Methods for Equipment and Procedures Used in ASTM F1495-2014a, Specification for ASTM F1387-1999 (R2012), Specification for Evaluating the Performance Characteristics of Combination Oven Electric or Gas Fired Performance of Piping and Tubing Protective Headgear Approved: 6/17/2014 Mechanically Attached Fittings Approved: 11/1/2015 [email protected] Approved: 5/22/2012 [email protected] [email protected] ASTM F1496-2013 (R2019), Test Method for ASTM F1447-2018, Specification for Helmets Performance of Convection Ovens ASTM F1409-2016, Test Method for Straight Used in Recreational Bicycling or Roller Approved: 5/21/2019 Line Movement of Vacuum Cleaners While Skating [email protected] Cleaning Carpets Approved: 6/26/2018 Approved: 11/22/2016 [email protected] ASTM F1498-2018, Specification for Taper Pipe [email protected] Threads 60 for Thermoplastic Pipe and ASTM F1455-2017, Guide for Selection of Fittings ASTM F1410-2011 (R2016), Test Method for Structural Details for Ship Construction Approved: 12/18/2018 Measuring Maximum Functional Wet Volume Approved: 5/23/2017 [email protected] of Utility Vacuum Cleaners [email protected] Approved: 4/19/2016 ASTM F1499-2017, Specification for Coextruded [email protected] ASTM F1476-2007 (R2013), Specification for Composite Drain, Waste, and Vent Pipe Performance of Gasketed Mechanical (DWV) Couplings for Use in Piping Applications Approved: 5/30/2017 Approved: 10/29/2013 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 152 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F1499-2017a, Specification for ASTM F1548-2001 (R2018), Specification for ASTM F1604-2015, Specification for Freezers, Coextruded Composite Drain, Waste, and Performance of Fittings for Use with Ice Cream, Soft Serve, Shake Vent Pipe (DWV) Gasketed Mechanical Couplings Used in Approved: 11/17/2015 Approved: 11/21/2017 Piping Applications [email protected] [email protected] Approved: 3/20/2018 [email protected] ASTM F1605-2014 (R2019), Test Method for ASTM F1507-2000 (R2017), Specification for Performance of Double-Sided Griddles Surge Suppressors for Shipboard Use ASTM F1551-2009 (R2017), Test Methods for Approved: 5/21/2019 Approved: 8/1/2017 Comprehensive Characterization of Synthetic [email protected] [email protected] Turf Playing Surfaces and Materials Approved: 12/26/2017 ASTM F1625-2000 (R2018), Specification and ASTM F1508-1997 (R2016), Specification for [email protected] Test Method for Rear-Mounted Bicycle Child Angle Style, Pressure Relief Valves for Steam, Carriers Gas, and Liquid Services ASTM F1563-2017 (R2019), Specification for Approved: 4/24/2018 Approved: 9/1/2016 Tools to Squeeze-off Polyethylene (PE) Gas [email protected] [email protected] Pipe or Tubing Approved: 8/20/2019 ASTM F1632-2003 (R2018), Test Method for ASTM F1510-2007 (R2013), Specification for [email protected] Particle Size Analysis and Sand Shape Grading Rotary Positive Displacement Pumps for of Golf Course Putting Green and Sports Field Ships Use ASTM F1565-2000 (R2019), Specification for Rootzone Mixes Approved: 10/29/2013 Pressure-Reducing Valves for Steam Service Approved: 10/23/2018 [email protected] Approved: 5/21/2019 [email protected] [email protected] ASTM F1511-2014, Specification for Mechanical ASTM F1647-2011 (R2018), Test Methods for Seals for Shipboard Pump Applications ASTM F1567-1994 (R2019), Specification for Organic Matter Content of Athletic Field Approved: 11/25/2014 Fabricated or Cast Automatic Self-Cleaning, Rootzone Mixes [email protected] Fuel Oil and Lubricating Oil Strainers Approved: 10/23/2018 Approved: 5/21/2019 [email protected] ASTM F1511-2016, Specification for Mechanical [email protected] Seals for Shipboard Pump Applications ASTM F1648-1995 (R2013), TEST METHODS FOR Approved: 11/22/2016 ASTM F1568-2012 (R2017), Specification for ARCHERY BOWSTRING COMPONENT-- [email protected] Food Processors, Electric SERVING STRING MATERIAL Approved: 12/26/2017 Approved: 05/21/2013 ASTM F1511-2018, Specification for Mechanical [email protected] [email protected] Seals for Shipboard Pump Applications Approved: 4/24/2018 ASTM F1587-2013 (R2018), Specification for ASTM F1668-2016, Guide for Construction [email protected] Head and Face Protective Equipment for Ice Procedures for Buried Plastic Pipe Hockey Goaltenders Approved: 7/26/2016 ASTM F1521-2012 (R2018), Test Methods for Approved: 4/24/2018 [email protected] Performance of Range Tops [email protected] Approved: 10/23/2018 ASTM F1669M-2012 (R2018), Specification for [email protected] ASTM F1601-2011 (R2016), Test Method for Insulation Monitors for Shipboard Electrical Motor Life Evaluation of an Electric Systems [Metric] ASTM F1544-2011 (R2017), Specification for Motorized Nozzle for Central Vacuum Approved: 4/24/2018 Determining the Rating Velocities of a Cleaning Systems [email protected] Compound Archery Bow Approved: 10/18/2016 Approved: 12/26/2017 [email protected] ASTM F1673-2017, Specification for [email protected] Polyvinylidene Fluoride (PVDF) Corrosive ASTM F1602-2012 (R2017), Specification for Waste Drainage Systems ASTM F1545-2017, Specification for Plastic- Kettles, Steam-Jacketed, 20 to 200 gal (75.7 Approved: 5/30/2017 Lined Ferrous Metal Pipe, Fittings, and to 757 L), Floor or Wall Mounted, Direct [email protected] Flanges Steam, Gas and Electric Heated Approved: 5/31/2017 Approved: 11/21/2017 ASTM F1674-2017, Test Method for Joint [email protected] [email protected] Restraint Products for Use with PVC Pipe Approved: 5/31/2017 ASTM F1546-1996 (R2018), Specification for ASTM F1603-2017, Specification for Kettles, [email protected] Fire Hose Nozzles Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Approved: 10/1/2018 Tilting, Table Mounted, Direct Steam, Gas ASTM F1674-2018, Test Method for Joint [email protected] and Electric Heated Restraint Products for Use with PVC Pipe Approved: 11/21/2017 Approved: 11/20/2018 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 153 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F1685-2000 (R2019), Specification for ASTM F1720-2014, Test Method for Measuring ASTM F1759-2017 (R2018), Practice for Design Pressure-Reducing Manifolds for Air or Thermal Insulation of Sleeping Bags Using a of High-Density Polyethylene (HDPE) Nitrogen Systems Heated Manikin Manholes for Subsurface Applications Approved: 5/21/2019 Approved: 11/25/2014 Approved: 2/20/2018 [email protected] [email protected] [email protected]

ASTM F1692-2011 (R2016), Test Method for ASTM F1720-2017, Test Method for Measuring ASTM F1759-2017, Practice for Design of High- Life Evaluation of a Turbine-Powered Nozzle Thermal Insulation of Sleeping Bags Using a Density Polyethylene (HDPE) Manholes for for Household Central Vacuum Cleaning Heated Manikin Subsurface Applications Systems Approved: 9/19/2017 Approved: 5/30/2017 Approved: 10/18/2016 [email protected] [email protected] [email protected] ASTM F1733-2018, Specification for Butt Heat ASTM F1760-2017, Specification for Coextruded ASTM F1695-2008 (R2015), Test Method for Fusion Polyamide(PA) Plastic Fitting for Poly(Vinyl Chloride) (PVC) Non-Pressure Performance of Underfired Broilers Polyamide(PA) Plastic Pipe and Tubing Plastic Pipe Having Reprocessed-Recycled Approved: 3/24/2015 Approved: 12/18/2018 Content [email protected] [email protected] Approved: 5/16/2017 [email protected] ASTM F1696-2015, Test Method for Energy ASTM F1734-2019, Practice for Qualification of Performance of Single-Rack, Door-Type a Combination of Squeeze Tool, Pipe, and ASTM F1776-2014, Specification for Eye Commercial Dishwashing Machines Squeeze-Off Procedures to Avoid Long-Term Protective Devices for Paintball Sports Approved: 8/24/2015 Damage in Polyethylene (PE) Gas Pipe Approved: 9/23/2014 [email protected] Approved: 1/22/2019 [email protected] [email protected] ASTM F1696-2018, Test Method for Energy ASTM F1776-2016, Specification for Eye Performance of Stationary-Rack, Door-Type ASTM F1749-2015, Specification for Fitness Protective Devices for Paintball Sports Commercial Dishwashing Machines Equipment and Fitness Facility Safety Signage Approved: 11/22/2016 Approved: 3/20/2018 and Labels [email protected] [email protected] Approved: 4/21/2015 [email protected] ASTM F1776-2018, Specification for Eye ASTM F1702-2010 (R2018), Test Method for Protective Devices for Paintball Sports Measuring Impact-Attenuation ASTM F1750-2011 (R2015), Specification for Approved: 7/1/2018 Characteristics of Natural Playing Surface Paintball Marker Threaded-Propellant Source [email protected] Systems Using a Lightweight Portable Interface Apparatus Approved: 4/21/2015 ASTM F1777-2012, Practice for Paintball Field Approved: 12/1/2018 [email protected] Operation [email protected] Approved: 1/1/2012 ASTM F1750-2016, Specification for Paintball [email protected] ASTM F1703-2013, Guide for Ice Hockey Playing Marker Threaded-Propellant Source Interface Facilities Approved: 4/19/2016 ASTM F1784-2008 (R2015), Test Method for Approved: 1/1/2013 [email protected] Performance of a Pasta Cooker [email protected] Approved: 3/24/2015 ASTM F1752-1996 (R2014), Test Method for [email protected] ASTM F1704-2012 (R2017), Test Method for Archery Bow Component--Cord Material Capture and Containment Performance of Approved: 9/23/2014 ASTM F1785-2008 (R2015), Test Method for Commercial Kitchen Exhaust Ventilation [email protected] Performance of Steam Kettles Systems Approved: 3/24/2015 Approved: 4/28/2017 ASTM F1753-1996 (R2014), Specification for [email protected] [email protected] Classification and Marking of Single-Lens Scopes for Use with Archery Bows ASTM F1786-1997 (R2016), Test Method for ASTM F1716-2008 (R2015), Guide for Transition Approved: 9/23/2014 Performance of Braising Pans and Performance of Marine Software [email protected] Approved: 10/18/2016 Systems Maintenance [email protected] Approved: 5/26/2015 ASTM F1755M-1996 (R2018), Specification for [email protected] Solid State Bargraph Meters for Shipboard ASTM F1787-2008 (R2015), Test Method for Use [Metric] Performance of Rotisserie Ovens ASTM F1718-2001 (R2019), Specification for Approved: 10/1/2018 Approved: 3/24/2015 Rotary Positive Displacement Distillate Fuel [email protected] [email protected] Pumps Approved: 5/21/2019 ASTM F1757-2008 (R2015), Guide for Digital ASTM F1791-2000 (R2019), Specification for [email protected] Communication Protocols for Computerized Filters Used in Air or Nitrogen Systems Systems Approved: 5/21/2019 Approved: 5/26/2015 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 154 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F1792-1997 (R2016), Specification for ASTM F1807-2019, Specification for Metal ASTM F1849-2018, Specification for Helmets Special Requirements for Valves Used in Insert Fittings Utilizing a Copper Crimp Ring, Used in Short Track Speed Ice Skating (Not to Gaseous Oxygen Service or Alternate Stainless Steel Clamps, for SDR9 Include Hockey) Approved: 9/1/2016 Cross-linked Polyethylene (PEX) Tubing and Approved: 3/1/2018 [email protected] SDR9 Polyethylene of Raised Temperature [email protected] (PE-RT) Tubing ASTM F1793-1997 (R2016), Specification for Approved: 8/20/2019 ASTM F1853-2011 (R2018), Test Method for Automatic Shut-Off Valves (Also Known as [email protected] Measuring Sleeping Bag Packing Volume Excess Flow Valves, EFV) for Air or Nitrogen Approved: 10/23/2018 Service ASTM F1808-2003 (R2013), Guide for Weight [email protected] Approved: 9/1/2016 Control Technical Requirements for Surface [email protected] Ships ASTM F1866-2017 (R2017), Specification for Approved: 10/29/2013 Poly (Vinyl Chloride) (PVC) Plastic Schedule ASTM F1794-1997 (R2016), Specification for [email protected] 40 Drainage and DWV Fabricated Fittings Hand-Operated, Globe-Style Valves for Gas Approved: 8/22/2017 (Except Oxygen Gas) and Hydraulic Systems ASTM F1815-2011 (R2018), Test Methods for [email protected] Approved: 9/1/2016 Saturated Hydraulic Conductivity, Water [email protected] Retention, Porosity, and Bulk Density of ASTM F1866-2017, Specification for Poly(Vinyl Athletic Field Rootzones Chloride) (PVC) Plastic Schedule 40 Drainage ASTM F1795-2000 (R2019), Specification for Approved: 10/23/2018 and DWV Fabricated Fittings Pressure-Reducing Valves for Air or Nitrogen [email protected] Approved: 5/30/2017 Systems [email protected] Approved: 5/21/2019 ASTM F1817-2017, Test Method for [email protected] Performance of Conveyor Ovens ASTM F1866-2018, Specification for Poly (Vinyl Approved: 4/28/2017 Chloride) (PVC) Plastic Schedule 40 Drainage ASTM F1799-2009 (R2015), Guide for Shipboard [email protected] and DWV Fabricated Fittings Generated Waste Management Audits Approved: 2/20/2018 Approved: 12/22/2015 ASTM F1827-2013 (R2019), Terminology [email protected] [email protected] Relating to Food Service Equipment Approved: 7/23/2019 ASTM F1878-2009 (R2015), Guide for Escort ASTM F1804-2016, Practice for Determining [email protected] Vessel Evaluation and Selection Allowable Tensile Load for Polyethylene (PE) Approved: 5/26/2015 Gas Pipe During Pull-In Installation ASTM F1832-2007 (R2017), Test Method for [email protected] Approved: 11/22/2016 Determining the Force-Draw and Let-Down [email protected] Curves for Archery Bows ASTM F1880-2009 (R2013), Test Method for the Approved: 12/26/2017 Determination of Percent of Let-Off for ASTM F1807-2017, Specification for Metal [email protected] Archery Bows Insert Fittings Utilizing a Copper Crimp Ring Approved: 11/26/2013 for SDR9 Cross-linked Polyethylene (PEX) ASTM F1833-1997 (R2017), Test Method for [email protected] Tubing and SDR9 Polyethylene of Raised Comparison of Rearfoot Motion Control Temperature (PE-RT) Tubing Properties of Running Shoes ASTM F1882-2006 (R2014), Specification for Approved: 3/28/2017 Approved: 9/19/2017 Residential Basketball Systems [email protected] [email protected] Approved: 11/25/2014 [email protected] ASTM F1807-2018, Specification for Metal ASTM F1835-1997 (R2018), Guide for Cable Insert Fittings Utilizing a Copper Crimp Ring Splicing Installations ASTM F1882-2015, Specification for Residential for SDR9 Cross-linked Polyethylene (PEX) Approved: 10/1/2018 Basketball Systems Tubing and SDR9 Polyethylene of Raised [email protected] Approved: 6/23/2015 Temperature (PE-RT) Tubing [email protected] Approved: 9/1/2018 ASTM F1836M-2015 (R2019), Specification for [email protected] Stuffing Tubes, Nylon, and Packing ASTM F1883-2003 (R2013), Practice For Assemblies (Metric) Selection of Wire and Cable Size in AWG or ASTM F1807-2018, Specification for Metal Approved: 5/21/2019 Metric Units Insert Fittings Utilizing a Copper Crimp Ring [email protected] Approved: 06/18/2013 for SDR9 Cross-linked Polyethylene (PEX) [email protected] Tubing and SDR9 Polyethylene of Raised ASTM F1836M-2015, Specification for Stuffing Temperature (PE-RT) Tubing Tubes, Nylon, and Packing Assemblies ASTM F1887-2014 (R2019), Test Method for Approved: 11/20/2018 (Metric) Measuring the Coefficient of Restitution [email protected] Approved: 12/1/2015 (COR) of Baseballs and Softballs [email protected] Approved: 4/30/2019 [email protected] ASTM F1837M-1997 (R2018), Specification for Heat-Shrink Cable Entry Seals (Metric) Approved: 10/1/2018 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 155 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F1888-2014 (R2016), Test Method for ASTM F1924-2019, Specification for Plastic ASTM F1952-2015, Specification for Helmets Compression-Displacement of Baseballs and Mechanical Fittings for Use on Outside Used for Downhill Mountain Bicycle Racing Softballs Diameter Controlled Polyethylene Gas Approved: 5/15/2015 Approved: 7/26/2016 Distribution Pipe and Tubing [email protected] [email protected] Approved: 8/20/2019 [email protected] ASTM F1953-2010 (R2018), Guide for ASTM F1889-2005 (R2014), Guide for Construction and Maintenance of Grass Straightness Measurement of Arrow Shafts ASTM F1932-1998 (R2018), Test Method for Tennis Courts Approved: 9/23/2014 Measuring Sleeping Bag Loft Approved: 4/24/2018 [email protected] Approved: 10/23/2018 [email protected] [email protected] ASTM F1890-2017, Test Method for Measuring ASTM F1955-2015, Test Method for Softball Bat Performance Factor ASTM F1933-1998 (R2018), Specification for Flammability of Sleeping Bags Approved: 8/15/2017 Illustrating the Footprint of a Backpacking or Approved: 4/21/2015 [email protected] Mountaineering Tent [email protected] Approved: 10/23/2018 ASTM F1898-2008 (R2015), Specification for [email protected] ASTM F1960-2017, Specification for Cold Helmets for Non-Motorized Wheeled Vehicle Expansion Fittings with PEX Reinforcing Rings Used by Infants and Toddlers ASTM F1934-1998 (R2018), Test Method for for Use with Cross-Linked Polyethylene (PEX) Approved: 1/1/2015 Weighing a Backpacking or Mountaineering Tubing [email protected] Tent Approved: 5/31/2017 Approved: 10/23/2018 [email protected] ASTM F1898-2015, Specification for Helmets for [email protected] Non-Motorized Wheeled Vehicle Used by ASTM F1960-2018, Specification for Cold Infants and Toddlers ASTM F1935-2001 (R2018), Test Method for Expansion Fittings with PEX Reinforcing Rings Approved: 4/21/2015 Measuring the Headroom of a Backpacking or for Use with Cross-linked Polyethylene (PEX) [email protected] Mountaineering Tent Tubing Approved: 10/23/2018 Approved: 10/3/2018 ASTM F1899-2014, Specification for Food [email protected] [email protected] Waste Pulper Without Waterpress Assembly Approved: 11/25/2014 ASTM F1936-2010 (R2015), Specification for ASTM F1960-2018, Specification for Cold [email protected] Impact Attenuation of Turf Playing Systems Expansion Fittings with PEX Reinforcing Rings as Measured in the Field for Use with Cross-linked Polyethylene (PEX) ASTM F1900-1998 (R2017), Test Method for Approved: 12/22/2015 Tubing Water Resistance of Footwear Using a [email protected] Approved: 11/20/2018 Walking Step Simulator [email protected] Approved: 9/19/2017 ASTM F1936-2019, Specification for Impact [email protected] Attenuation of Turf Playing Systems as ASTM F1960-2019, Specification for Cold Measured in the Field Expansion Fittings with PEX Reinforcing Rings ASTM F1901-2016, Specification for Approved: 7/1/2019 for Use with Cross-linked Polyethylene (PEX) Polyethylene (PE) Pipe and Fittings for Roof [email protected] and Polyethylene of Raised Temperature (PE- Drain Systems RT) Tubing Approved: 8/23/2016 ASTM F1937-2005 (R2017), Specification for Approved: 8/20/2019 [email protected] Body Protectors Used in Horse Sports and [email protected] Horseback Riding ASTM F1919-2014, Specification for Griddles, Approved: 5/15/2017 ASTM F1963-2005 (R2017), Specification for Single and Double Sided, Self-heating, [email protected] Deep-Fat Fryers, Gas or Electric, Open Counter or Stand Mounted Gas and Electric Approved: 11/21/2017 Fired ASTM F1948-2017, Specification for Metallic [email protected] Approved: 4/22/2014 Mechanical Fittings for Use on Outside [email protected] Diameter Controlled Thermoplastic Gas ASTM F1964-2011 (R2019), Test Method for Distribution Pipe and Tubing Performance of Pressure Fryers ASTM F1920-2015, Test Method for Approved: 5/30/2017 Approved: 5/21/2019 Performance of Rack Conveyor, Commercial [email protected] [email protected] Dishwashing Machines Approved: 8/24/2015 ASTM F1951-2014, Specification for ASTM F1965-2017, Test Method for [email protected] Determination of Accessibility of Surface Performance of Deck Ovens Systems Under and Around Playground Approved: 6/20/2017 ASTM F1924-2017, Specification for Plastic Equipment [email protected] Mechanical Fittings for Use on Outside Approved: 6/1/2014 Diameter Controlled Polyethylene Gas [email protected] ASTM F1966-2012 (R2017), Specification for Distribution Pipe and Tubing Dough Divider and Rounding Machines Approved: 5/30/2017 Approved: 12/26/2017 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 156 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F1970-2017, Specification for Special ASTM F1985-1999 (R2019), Specification for ASTM F2021-2017, Guide for Design and Engineered Fittings, Appurtenances or Valves Pneumatic-Operated, Globe-Style, Control Installation of Plastic Siphonic Roof Drainage for Use in Poly(Vinyl Chloride) (PVC) or Valves Systems Chlorinated Poly(Vinyl Chloride) (CPVC) Approved: 8/1/2019 Approved: 5/30/2017 Systems [email protected] [email protected] Approved: 5/31/2017 [email protected] ASTM F1986-2017, Specification for Multilayer ASTM F2021-2017a, Guide for Design and Pipe Type 2, Compression Fittings, and Installation of Plastic Siphonic Roof Drainage ASTM F1970-2019, Specification for Special Compression Joints for Hot and Cold Systems Engineered Fittings, Appurtenances or Valves Drinking-Water Systems Approved: 11/21/2017 for use in Poly (Vinyl Chloride) (PVC) or Approved: 5/31/2017 [email protected] Chlorinated Poly (Vinyl Chloride) (CPVC) [email protected] Systems ASTM F2022-2001 (R2019), Test Method for Approved: 4/30/2019 ASTM F1987-2017, Specification for Multilayer Performance of Booster Heaters [email protected] Pipe Type 2, Compression Fittings, and Approved: 5/21/2019 Compression Joints for Hydronic Heating [email protected] ASTM F1973-2017 (R2018), Specification for Systems Factory Assembled Anodeless Risers and Approved: 5/31/2017 ASTM F2030-2011 (R2016), Specification for Transition Fittings in Polyethylene (PE) and [email protected] Paintball Cylinder Burst Disk Assemblies Polyamide 11 (PA11) and Polyamide 12 Approved: 4/19/2016 (PA12) Fuel Gas Distribution Systems ASTM F1991-2006 (R2016), Test Method for [email protected] Approved: 2/20/2018 Performance of Chinese (Wok) Ranges [email protected] Approved: 10/18/2016 ASTM F2031-2005 (R2014), Test Method for [email protected] Measurement of Arrow Shaft Static Spine ASTM F1973-2017, Specification for Factory (Stiffness) Assembled Anodeless Risers and Transition ASTM F1994-2000 (R2019), Test Method for Approved: 9/23/2014 Fittings in Polyethylene (PE) and Polyamide Shipboard Fixed Foam Firefighting Systems [email protected] 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Approved: 8/1/2019 Distribution Systems [email protected] ASTM F2032-2015, Specification for Helmets Approved: 5/30/2017 Used for BMX Cycling [email protected] ASTM F2001-2015, Guide for Vessel-Related Approved: 5/15/2015 Technical Information for Use in Developing [email protected] ASTM F1974-2017, Specification for Metal an Electronic Database and Ship Safety Insert Fittings for Record ASTM F2039-2000 (R2018), Guide for Basic Polyethylene/Aluminum/Polyethylene and Approved: 5/26/2015 Elements of Shipboard Occupational Health Crosslinked [email protected] and Safety Program Polyethylene/Aluminum/Crosslinked Approved: 10/1/2018 Polyethylene Composite Pressure Pipe ASTM F2014-2000 (R2019), Specification for [email protected] Approved: 5/31/2017 Non-Reinforced Extruded Tee Connections [email protected] for Piping Applications ASTM F2040-2018, Specification for Helmets Approved: 5/21/2019 Used for Recreational Snow Sports ASTM F1975-2015, Specification for [email protected] Approved: 3/1/2018 Nonpowered Bicycle Trailers Designed for [email protected] Human Passengers ASTM F2015-2000 (R2019), Specification for Lap Approved: 10/20/2015 Joint Flange Pipe End Applications ASTM F2043-2013 (R2018), Classification for [email protected] Approved: 5/21/2019 Bicycle Usage [email protected] Approved: 11/20/2018 ASTM F1976-2013, TEST METHOD FOR IMPACT [email protected] ATTENUATION PROPERTIES OF ATHLETIC ASTM F2016-2000 (R2018), Practice for SHOES USING AN IMPACT TEST Establishing Shipbuilding Quality ASTM F2044-2005 (R2019), Specification for Approved: 05/21/2013 Requirements for Hull Structure, Outfitting, Liquid Level Indicating Equipment, Electrical [email protected] and Coatings Approved: 3/26/2019 Approved: 10/1/2018 [email protected] ASTM F1977-2004 (R2017), Test Method for [email protected] Determining Initial, Fractional, Filtration ASTM F2045-2000 (R2018), Specification for Efficiency of a Vacuum Cleaner System ASTM F2017-2015, Guide for Database Indicators, Sight, Liquid Level, Direct and Approved: 3/1/2017 Structure of Electronic Data Interchange Indirect Reading, Tubular Glass/Plastic [email protected] Between Ship Owner and Shipyard for Approved: 1/1/2018 Contract Administration [email protected] ASTM F1979-2010 (R2014), Specification for Approved: 5/26/2015 Paintballs Used in the Sport of Paintball [email protected] ASTM F2046-2000 (R2017), Specification for Approved: 5/20/2014 Tachometers, Various [email protected] Approved: 8/1/2017 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 157 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F2048-2009 (R2017), Practice for ASTM F2098-2017, Specification for Stainless ASTM F2125-2009 (R2013), Test Method for Reporting Slip Resistance Test Results Steel Clamps for Securing SDR9 Cross-Linked Treestand Static Stability and Adherence Approved: 8/1/2017 Polyethylene (PEX) Tubing to Metal Insert Approved: 11/26/2013 [email protected] and Plastic Insert Fittings [email protected] Approved: 5/31/2017 ASTM F2060-2001 (R2018), Guide for [email protected] ASTM F2126-2006 (R2018), Test Method for Maintaining Cool Season Turfgrasses on Treestand Static Load Capacity Athletic Fields ASTM F2098-2018, Specification for Stainless Approved: 10/23/2018 Approved: 10/23/2018 Steel Clamps for Securing SDR9 Cross-linked [email protected] [email protected] Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings ASTM F2135-2017, Specification for Molded ASTM F2070-2001 (R2017), Specification for Approved: 11/15/2018 Drain, Waste, and Vent (DWV) Short-Pattern Transducers, Pressure and Differential, [email protected] Plastic Fittings Pressure, Electrical and Fiber-Optic Approved: 3/28/2017 Approved: 8/1/2017 ASTM F2105-2016, Test Method for Measuring [email protected] [email protected] Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems ASTM F2138-2017 (R2017), Specification for ASTM F2071-2001 (R2017), Specification for Approved: 10/18/2016 Excess Flow Valves for Natural Gas Service Switch, Position Proximity (Noncontact) or [email protected] Approved: 8/22/2017 Limit (Mechanical Contact), Fiber-Optic [email protected] Approved: 8/1/2017 ASTM F2105-2017, Test Method for Measuring [email protected] Air Performance Characteristics of Vacuum ASTM F2138-2017, Specification for Excess Flow Cleaner Motor/Fan Systems Valves for Natural Gas Service ASTM F2075-2015, Specification for Engineered Approved: 9/19/2017 Approved: 5/30/2017 Wood Fiber for Use as a Playground Safety [email protected] [email protected] Surface Under and Around Playground Equipment ASTM F2105-2018, Test Method for Measuring ASTM F2140-2011 (R2019), Test Method for Approved: 1/1/2015 Air Performance Characteristics of Vacuum Performance of Hot Food Holding Cabinets [email protected] Cleaner Motor/Fan Systems Approved: 5/21/2019 Approved: 10/23/2018 [email protected] ASTM F2080-2016, Specification for Cold- [email protected] Expansion Fittings with Metal Compression- ASTM F2141-2007 (R2019), Test Method for Sleeves for Crosslinked Polyethylene (PEX) ASTM F2106-2018, Test Methods for Evaluating Performance of Self-Serve Hot Deli Cases Pipe Design and Performance Characteristics of Approved: 5/21/2019 Approved: 8/23/2016 Motorized Treadmills [email protected] [email protected] Approved: 6/26/2018 [email protected] ASTM F2142-2001 (R2019), Test Method for ASTM F2080-2018, Specification for Cold- Performance of Drawer Warmers Expansion Fittings with Metal Compression- ASTM F2107-2008 (R2015), Guide for Approved: 5/21/2019 Sleeves for Crosslinked Polyethylene (PEX) Construction and Maintenance of Skinned [email protected] Pipe and SDR9 Polyethylene of Raised Areas on Baseball and Softball Fields Temperature (PE-RT) Pipe Approved: 12/1/2015 ASTM F2143-2016, Test Method for Approved: 11/20/2018 [email protected] Performance of Refrigerated Buffet and [email protected] Preparation Tables ASTM F2115-2018, Specification for Motorized Approved: 6/28/2016 ASTM F2087-2013 (R2019), Specification for Treadmills [email protected] Packing, Fiberglass, Braided, Rope, and Wick Approved: 6/26/2018 Approved: 7/23/2019 [email protected] ASTM F2144-2009 (R2016), Test Method for [email protected] Performance of Large Open Vat Fryers ASTM F2117-2010 (R2017), Test Method for Approved: 10/18/2016 ASTM F2092-2014, Specification for Convection Vertical Rebound Characteristics of Sports [email protected] Oven Gas or Electric Surface/Ball Systems; Acoustical Approved: 6/17/2014 Measurement ASTM F2144-2017, Test Method for [email protected] Approved: 4/28/2017 Performance of Large Open Vat Fryers [email protected] Approved: 11/21/2017 ASTM F2093-2018, Test Method for [email protected] Performance of Rack Ovens ASTM F2120-2006 (R2014), Practice for Testing Approved: 3/20/2018 Treestand Load Capacity ASTM F2145-2017 (R2018), Specification for [email protected] Approved: 9/23/2014 Polyamide 11 (PA 11) and Polyamide 12 [email protected] (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 ASTM F2123-2019, Practice for Treestand and Polyamide 12 Pipe and Tubing Instructions Approved: 3/5/2018 Approved: 6/25/2019 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 158 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F2145-2017, Specification for Polyamide ASTM F2160-2017, Specification for Solid Wall ASTM F2216-2017, Specification for 11 (PA 11) and Polyamide 12 (PA12) High Density Polyethylene (HDPE) Conduit Selectorized Strength Equipment Mechanical Fittings for Use on Outside Based on Controlled Outside Diameter (OD) Approved: 4/28/2017 Diameter Controlled Polyamide 11 and Approved: 1/10/2017 [email protected] Polyamide 12 Pipe and Tubing [email protected] Approved: 5/30/2017 ASTM F2216-2017a, Specification for [email protected] ASTM F2165-2017, Specification for Flexible Selectorized Strength Equipment Pre-Insulated Piping Approved: 12/26/2017 ASTM F2153-2007 (R2018), Test Method for Approved: 5/31/2017 [email protected] Measurement of Backpack Capacity [email protected] Approved: 4/24/2018 ASTM F2218-2008 (R2015), Guide for Hardware [email protected] ASTM F2165-2019, Specification for Flexible Implementation for Computerized Systems Pre-Insulated Piping Approved: 5/26/2015 ASTM F2154-2013 (R2019), Specification for Approved: 1/22/2019 [email protected] Sound-Absorbing Board, Fibrous Glass, [email protected] Perforated Fibrous Glass Cloth Faced ASTM F2219-2014, Test Methods for Measuring Approved: 5/21/2019 ASTM F2168-2013, Specification for Packing High-Speed Bat Performance [email protected] Material, Graphitic, Corrugated Ribbon or Approved: 5/20/2014 Textured Tape, and Die-Formed Ring [email protected] ASTM F2157-2009 (R2018), Specification for Approved: 10/29/2013 Synthetic Surfaced Running Tracks [email protected] ASTM F2220-2014, Specification for Headforms Approved: 7/1/2018 Approved: 11/25/2014 [email protected] ASTM F2176-2017, Specification for Mechanical [email protected] Couplings Used on Polyethylene Conduit, ASTM F2158-2008 (R2016), Specification for Duct and Innerduct ASTM F2220-2015, Specification for Headforms Residential Central-Vacuum Tube and Fittings Approved: 9/1/2017 Approved: 6/23/2015 Approved: 10/18/2016 [email protected] [email protected] [email protected] ASTM F2184-2010 (R2018), Guide for ASTM F2223-2015, Guide for ASTM Standards ASTM F2159-2017, Specification for Plastic Installation of Paintball Barrier Netting on Playground Surfacing Insert Fittings Utilizing a Copper Crimp Ring Approved: 6/26/2018 Approved: 10/20/2015 for SDR9 Cross-Linked Polyethylene (PEX) [email protected] [email protected] Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing ASTM F2191-2013, Specification for Packing ASTM F2223-2019, Guide for ASTM Standards Approved: 5/31/2017 Material, Graphitic or Carbon Braided Yarn on Playground Surfacing [email protected] Approved: 12/15/2013 Approved: 7/1/2019 [email protected] [email protected] ASTM F2159-2018, Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring ASTM F2192-2005 (R2017), Test Method for ASTM F2225-2015, Safety Specification for for SDR9 Cross-linked Polyethylene (PEX) Determining and Reporting the Berthing Consumer Trampoline Enclosures Tubing and SDR9 Polyethylene of Raised Energy and Reaction of Marine Fenders Approved: 7/1/2015 Temperature (PE-RT) Tubing Approved: 12/26/2017 [email protected] Approved: 4/24/2018 [email protected] [email protected] ASTM F2237-2008 (R2015), Test Method for ASTM F2202-2007 (R2015), Specification for Performance of Upright Overfired Broilers ASTM F2159-2018, Specification for Plastic Slow Cook/Hold Ovens and Hot Food Holding Approved: 3/24/2015 Insert Fittings Utilizing a Copper Crimp Ring Cabinets [email protected] for SDR9 Cross-linked Polyethylene (PEX) Approved: 3/24/2015 Tubing and SDR9 Polyethylene of Raised [email protected] ASTM F2238-2016, Test Method for Temperature (PE-RT) Tubing Performance of Rapid Cook Ovens Approved: 11/20/2018 ASTM F2206-2017, Specification for Fabricated Approved: 3/15/2016 [email protected] Fittings of Butt-Fused Polyethylene (PE) [email protected] Approved: 5/31/2017 ASTM F2159-2019, Specification for Plastic [email protected] ASTM F2239-2010 (R2016), Test Method for Insert Fittings Utilizing a Copper Crimp Ring, Performance of Conveyor Broilers or Alternate Stainless Steel Clamps for SDR9 ASTM F2206-2019, Specification for Fabricated Approved: 10/18/2016 Cross-linked Polyethylene (PEX) Tubing and Fittings of Butt-Fused Polyethylene (PE) [email protected] SDR9 Polyethylene of Raised Temperature Approved: 1/22/2019 (PE-RT) Tubing [email protected] ASTM F2268-2010 (R2015), Specification for Approved: 8/20/2019 Bicycle Serial Numbers [email protected] ASTM F2207-2017 (R2019), Specification for Approved: 10/20/2015 Cured-in-Place Pipe Lining System for [email protected] Rehabilitation of Metallic Gas Pipe Approved: 8/20/2019 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 159 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F2269-2011 (R2018), Guide for ASTM F2277-2017a, Test Methods for ASTM F2362-2009 (R2013), Specification for Maintaining Warm Season Turfgrasses on Evaluating Design and Performance Temperature Monitoring Equipment Athletic Fields Characteristics of Selectorized Strength Approved: 10/29/2013 Approved: 10/23/2018 Equipment [email protected] [email protected] Approved: 12/26/2017 [email protected] ASTM F2363-2017, Specification for Sewage ASTM F2270-2012 (R2018), Guide for and Graywater Flow Through Treatment Construction and Maintenance of Warning ASTM F2278-2019, Test Method for Evaluating Systems Track Areas on Athletic Fields Paintball Barrier Netting Approved: 11/15/2017 Approved: 4/24/2018 Approved: 3/5/2019 [email protected] [email protected] [email protected] ASTM F2379-2004 (R2016), Test Method for ASTM F2270-2012 (R2018), Guide for ASTM F2283-2012 (R2018), Specification for Energy Performance of Powered Open Construction and Maintenance of Warning Shipboard Oil Pollution Abatement System Warewashing Sinks Track Areas on Athletic Fields Approved: 7/1/2018 Approved: 10/18/2016 Approved: 10/23/2018 [email protected] [email protected] [email protected] ASTM F2324-2013 (R2019), Test Method for ASTM F2380-2004 (R2016), Test Method for ASTM F2271-2011 (R2015), Specification for Prerinse Spray Valves Performance of Conveyor Toasters Paintball Marker Barrel Blocking Devices Approved: 5/21/2019 Approved: 10/18/2016 Approved: 4/21/2015 [email protected] [email protected] [email protected] ASTM F2333-2004 (R2017), Test Method for ASTM F2380-2018, Test Method for ASTM F2272-2013 (R2017), Specification for Traction Characteristics of the Athletic Shoe- Performance of Conveyor Toasters Paintball Markers Sports Surface Interface Approved: 3/20/2018 Approved: 4/28/2017 Approved: 9/19/2017 [email protected] [email protected] [email protected] ASTM F2389-2017, Specification for Pressure- ASTM F2273-2011 (R2016), Test Methods for ASTM F2334-2009 (R2017), Guide for Above rated Polypropylene (PP) Piping Systems Bicycle Forks Ground Public Use Skatepark Facilities Approved: 1/15/2017 Approved: 10/18/2016 Approved: 4/28/2017 [email protected] [email protected] [email protected] ASTM F2389-2017a, Specification for Pressure- ASTM F2274-2011 (R2016), Specification for ASTM F2334-2018, Guide for Above Ground rated Polypropylene (PP) Piping Systems Condition 3 Bicycle Forks Public Use Skatepark Facilities Approved: 3/28/2017 Approved: 10/18/2016 Approved: 4/24/2018 [email protected] [email protected] [email protected] ASTM F2390-2017 (R2017), Specification for ASTM F2275-2010 (R2014), Practice for ASTM F2336-2017, Reinstatement on Standard Poly(Vinyl Chloride) (PVC) Plastic Drain, Treestand Manufacturer Quality Assurance Guide for Roller Hockey Playing Facilities Waste, and Vent (DWV) Pipe and Fittings Program Approved: 5/15/2017 Having Post-Industrial Recycle Content Approved: 9/23/2014 [email protected] Approved: 8/22/2017 [email protected] [email protected] ASTM F2337-2016, Test Method for Treestand ASTM F2275-2017, Practice for Treestand Fall Arrest System ASTM F2390-2017, Specification for Poly(Vinyl Manufacturer Quality Assurance Program Approved: 10/18/2016 Chloride) (PVC) Plastic Drain, Waste, and Approved: 12/26/2017 [email protected] Vent (DWV) Pipe and Fittings Having Post- [email protected] Industrial Recycle Content ASTM F2337-2018, Test Method for Treestand Approved: 5/30/2017 ASTM F2276-2010 (R2015), Specification for Fall Arrest System [email protected] Fitness Equipment Approved: 6/26/2018 Approved: 10/20/2015 [email protected] ASTM F2396-2011, Guide for Construction of [email protected] High Performance Sand-Based Rootzones for ASTM F2337-2019, Test Method for Treestand Athletic Fields ASTM F2277-2017, Test Methods for Evaluating Fall Arrest System Approved: 4/26/2011 Design and Performance Characteristics of Approved: 3/5/2019 [email protected] Selectorized Strength Equipment [email protected] Approved: 5/15/2017 ASTM F2397-2009 (R2015), Specification for [email protected] ASTM F2361-2018, Guide for Ordering Low Protective Headgear Used in Martial Arts Voltage (1000 VAC or Less) Alternating Approved: 1/1/2015 Current Electric Motors for Shipboard [email protected] ServiceUp to and Including Motors of 500 Horsepower Approved: 11/20/2018 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 160 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F2397-2018, Specification for Protective ASTM F2446-2010 (R2019), Classification for ASTM F2508-2016, Practice for Validation, Headgear Used in Martial Arts Hierarchy of Equipment Identifiers and Calibration, and Certification of Walkway Approved: 10/23/2018 Boundaries for Reliability, Availability, and Tribometers Using Reference Surfaces [email protected] Maintainability (RAM) Performance Data Approved: 7/1/2016 Exchange [email protected] ASTM F2398-2011 (R2015), Test Method for Approved: 12/18/2018 Measuring Moment of Inertia and Center of [email protected] ASTM F2509-2017 (R2019), Specification for Percussion of a Baseball or Softball Bat Field-assembled Anodeless Riser Kits for Use Approved: 10/20/2015 ASTM F2472-2005 (R2016), Test Method for on Outside Diameter Controlled Polyethylene [email protected] Performance of Staff-Serve Hot Deli Cases and Polyamide-11 (PA11) Gas Distribution Approved: 10/18/2016 Pipe and Tubing ASTM F2400-2016, Specification for Helmets [email protected] Approved: 8/20/2019 Used in Pole Vaulting [email protected] Approved: 4/19/2016 ASTM F2473-2012 (R2018), Test Method for [email protected] Performance of Water-Bath Rethermalizers ASTM F2510-2017, Specification for Resilient Approved: 3/20/2018 Connectors between Reinforced Concrete ASTM F2432-2012 (R2018), Specification for Ice [email protected] Manhole Structures and Corrugated High Making Machines, Icemaker-Dispensers, and Density Polyethylene Drainage Pipes Ice Dispensing Equipment ASTM F2474-2014, Test Method for Heat Gain Approved: 5/31/2017 Approved: 10/23/2018 to Space Performance of Commercial Kitchen [email protected] [email protected] Ventilation/Appliance Systems Approved: 11/25/2014 ASTM F2510-2017a, Specification for Resilient ASTM F2434-2017, Specification for Metal [email protected] Connectors Between Reinforced Concrete Insert Fittings Utilizing a Copper Crimp Ring Manhole Structures and Corrugated High for SDR9 Cross-Linked Polyethylene (PEX) ASTM F2474-2017, Test Method for Heat Gain Density Polyethylene Drainage Pipes Tubing and SDR9 Cross-Linked to Space Performance of Commercial Kitchen Approved: 12/26/2017 Polyethylene/Aluminum/Cross-Linked Ventilation/Appliance Systems [email protected] Polyethylene (PEX-AL-PEX) Tubing Approved: 6/20/2017 Approved: 5/31/2017 [email protected] ASTM F2519-2011 (R2015), Test Method for [email protected] Grease Particle Capture Efficiency of ASTM F2479-2017, Guide for Specification, Commercial Kitchen Filters and Extractors ASTM F2434-2018, Specification for Metal Purchase, Installation and Maintenance of Approved: 11/17/2015 Insert Fittings Utilizing a Copper Crimp Ring Poured-In-Place Playground Surfacing [email protected] for SDR9 Cross-linked Polyethylene (PEX) Approved: 4/28/2017 Tubing and SDR9 Cross-linked [email protected] ASTM F2520-2005 (R2012), Specification for Polyethylene/Aluminum/Cross-linked Reach-In Refrigerators, Freezers, Polyethylene (PEX-AL-PEX) Tubing ASTM F2479-2017a, Guide for Specification, Combination Refrigerator/Freezers, and Approved: 11/20/2018 Purchase, Installation and Maintenance of Thaw Cabinets [email protected] Poured-In-Place Playground Surfacing Approved: 5/22/2012 Approved: 6/20/2017 [email protected] ASTM F2435-2015, Specification for Steel [email protected] Reinforced Polyethylene (PE) Corrugated Pipe ASTM F2521-2009 (R2014), Specification for Approved: 6/1/2015 ASTM F2480-2006 (R2017), Guide for In-ground Heavy-Duty Ranges, Gas and Electric [email protected] Concrete Skatepark Approved: 4/22/2014 Approved: 4/28/2017 [email protected] ASTM F2439-2011 (R2016), Specification for [email protected] Headgear Used in Soccer ASTM F2530-2013, Specification for Protective Approved: 4/19/2016 ASTM F2480-2018, Guide for In-ground Headgear with Faceguard Used in Bull Riding [email protected] Concrete Skatepark Approved: 11/26/2013 Approved: 4/24/2018 [email protected] ASTM F2439-2017, Specification for Headgear [email protected] Used in Soccer ASTM F2531-2013, Test Method for Load Approved: 9/19/2017 ASTM F2487-2017 (R2017), Practice for Capacity of Treestand Seats [email protected] Infiltration and Exfiltration Acceptance Approved: 12/24/2013 Testing of Installed Corrugated High Density [email protected] ASTM F2440-2018, Specification for Indoor Polyethylene and Polypropylene Pipelines Wall/Feature Padding Approved: 11/21/2017 ASTM F2536-2017, Guide for Installing Plastic Approved: 11/20/2018 [email protected] DWV Piping Suspended from On-Grade Slabs [email protected] Approved: 5/30/2017 ASTM F2487-2017, Practice for Infiltration and [email protected] ASTM F2441-2012 (R2018), Practice for Exfiltration Acceptance Testing of Installed Labeling of Backpacking and Mountaineering Corrugated High Density Polyethylene and ASTM F2536-2017a, Guide for Installing Plastic Tents and Bivouac Sacks Polypropylene Pipelines DWV Piping Suspended from On-Grade Slabs Approved: 4/24/2018 Approved: 5/31/2017 Approved: 11/21/2017 [email protected] [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 161 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F2544-2011 (R2018), Test Method for ASTM F2607-2008 (R2014), Test Method for ASTM F2643-2015, Specification for Powered Determining A-Weighted Sound Power Level Measuring the Hard Surface Floor-Cleaning Pot, Pan and Utensil Washing Sinks of Central Vacuum Power Units Ability of Household/Commercial Vacuum Approved: 8/24/2015 Approved: 3/20/2018 Cleaners [email protected] [email protected] Approved: 11/25/2014 [email protected] ASTM F2644-2007 (R2019), Test Method For ASTM F2553-2016, Specification for Warnings Performance of Commercial Patio Heaters on Refillable CO2 Cylinders Used In the Sport ASTM F2608-2007 (R2014), Test Method for Approved: 5/21/2019 of Paintball Determining the Change in Room Air [email protected] Approved: 4/19/2016 Particulate Counts as a Result of the Vacuum [email protected] Cleaning Process ASTM F2645-2016, Specification for Bun Slicing Approved: 10/21/2014 Machines ASTM F2562-2017, Specification for Steel [email protected] Approved: 12/20/2016 Reinforced Thermoplastic Ribbed Pipe and [email protected] Fittings for Non-Pressure Drainage and ASTM F2608-2015, Test Method for Sewerage Determining the Change in Room Air ASTM F2646-2016, Specification for Bread Approved: 5/31/2017 Particulate Counts as a Result of the Vacuum Slicing Machines [email protected] Cleaning Process Approved: 12/20/2016 Approved: 11/17/2015 [email protected] ASTM F2568-2006 (R2018), Test Method for [email protected] Measurement of Sleeping Bags ASTM F2647-2007 (R2016), Guide for Approved Approved: 4/24/2018 ASTM F2609-2011 (R2015), Test Method for Methods of Installing a CVS (Central Vacuum [email protected] Litter-Cleaning Effectiveness of Vacuum System) Cleaners Approved: 10/18/2016 ASTM F2569-2011, Test Method For Evaluating Approved: 11/17/2015 [email protected] The Force Reduction Properties Of Surfaces [email protected] For Athletic Use ASTM F2649-2017 (R2019), Specification for Approved: 11/22/2011 ASTM F2614-2019, Specification for Condition 3 Corrugated High Density Polyethylene (HDPE) [email protected] Bicycle Frames Grease Interceptor Tanks Approved: 6/25/2019 Approved: 3/5/2019 ASTM F2571-2015, Test Methods for Evaluating [email protected] [email protected] Design and Performance Characteristics of Fitness Equipment ASTM F2618-2017, Specification for Chlorinated ASTM F2649-2017, Specification for Corrugated Approved: 6/23/2015 Poly(Vinyl Chloride) (CPVC) Pipe and Fittings High Density Polyethylene (HDPE) Grease [email protected] for Chemical Waste Drainage Systems Interceptor Tanks Approved: 5/30/2017 Approved: 5/30/2017 ASTM F2573-2006 (R2018), Specification for [email protected] [email protected] Low Velocity Resilient Material Projectile Approved: 6/26/2018 ASTM F2618-2019, Specification for Chlorinated ASTM F2650-2017, TERMINOLOGY RELATING [email protected] Poly (Vinyl Chloride) (CPVC) Pipe and Fittings TO IMPACT TESTING OF SPORTS SURFACES for Chemical Waste Drainage Systems AND EQUIPMENT ASTM F2574-2006 (R2018), Specification for Approved: 1/1/2019 Approved: 9/15/2017 Low Velocity Projectile Marker [email protected] [email protected] Approved: 6/26/2018 [email protected] ASTM F2620-2017, Practice for Heat Fusion ASTM F2651-2010a, Terminology Relating to Joining of Polyethylene Pipe and Fittings Soil and Turfgrass Charactristics of Natural ASTM F2600-2017 (R2018), Specification for Approved: 5/31/2017 Playing Surfaces Electrofusion Type Polyamide-11 Fittings for [email protected] Approved: 12/15/2010 Outside Diameter Controlled Polyamide-11 [email protected] Pipe and Tubing ASTM F2620-2019, Practice for Heat Fusion Approved: 2/20/2018 Joining of Polyethylene Pipe and Fittings ASTM F2651-2011 (R2015), Terminology [email protected] Approved: 3/5/2019 Relating to Soil and Turfgrass Characteristics [email protected] of Natural Playing Surfaces ASTM F2600-2017, Specification for Approved: 10/20/2015 Electrofusion Type Polyamide-11 Fittings for ASTM F2623-2017, Specification for [email protected] Outside Diameter Controlled Polyamide-11 Polyethylene of Raised Temperature (PE-RT) Pipe and Tubing SDR 9 Tubing ASTM F2653-2011 (R2015), Specification for Approved: 5/30/2017 Approved: 5/30/2017 Paintball Valve Male Threaded Connection [email protected] [email protected] for Use with Approved Cylinders Approved: 4/21/2015 ASTM F2623-2019, Specification for [email protected] Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing Approved: 4/30/2019 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 162 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F2653-2016, Specification for Paintball ASTM F2735-2017, Specification for Plastic ASTM F2767-2018, Specification for Valve Male Threaded Connection for Use Insert Fittings for SDR9 Cross-Linked Electrofusion Type Polyamide-12 Fittings for with Approved Cylinders Polyethylene (PEX) and Polyethylene of Outside Diameter Controlled Polyamide-12 Approved: 4/19/2016 Raised Temperature (PE-RT) Tubing Pipe and Tubing for Gas Distribution [email protected] Approved: 5/31/2017 Approved: 4/24/2018 [email protected] [email protected] ASTM F2654-2015, Specification for Low Energy Air Gun (LEAG) Warnings ASTM F2735-2018, Specification for Plastic ASTM F2769-2016, Specification for Approved: 4/21/2015 Insert Fittings For SDR9 Cross-linked Polyethylene of Raised Temperature (PE-RT) [email protected] Polyethylene (PEX) and Polyethylene of Plastic Hot and Cold-Water Tubing and Raised Temperature (PE-RT) Tubing Distribution Systems ASTM F2654-2016, Specification for Airsoft Gun Approved: 11/20/2018 Approved: 11/22/2016 Warnings [email protected] [email protected] Approved: 6/1/2016 [email protected] ASTM F2737-2017 (R2017), Specification for ASTM F2769-2018, Specification for Corrugated High Density Polyethylene (HDPE) Polyethylene of Raised Temperature (PE-RT) ASTM F2679-2015 (R2019), Specification for 6 Water Quality Units Plastic Hot and Cold-Water Tubing and mm Projectiles Used with Airsoft Guns Approved: 8/22/2017 Distribution Systems Approved: 6/25/2019 [email protected] Approved: 8/21/2018 [email protected] [email protected] ASTM F2737-2017, Specification for Corrugated ASTM F2679-2015, Specification for 6 mm High Density Polyethylene (HDPE) Water ASTM F2772-2011, Specification For Athletic Projectiles Used with Low Energy Air Guns Quality Units Performance Properties Of Indoor Sports Approved: 4/21/2015 Approved: 5/30/2017 Floor Systems [email protected] [email protected] Approved: 11/22/2011 [email protected] ASTM F2680-2017, Specification for Manually ASTM F2747-2010, Guide for Construction of Operated Front Wheel Retention Systems for Sand-Based Rootzones for Golf Putting ASTM F2773-2013 (R2017), Practice for Bicycles Greens and Tees Transfilling Compressed Air or Nitrogen and Approved: 9/19/2017 Approved: 7/1/2010 Safe Handling of Small Paintball Cylinders [email protected] [email protected] Approved: 4/28/2017 [email protected] ASTM F2681-2018, Specification for Body ASTM F2748-2015 (R2019), Specification for Protectors Used in Equine Racing Airsoft Guns ASTM F2774-2009 (R2014), Practice for Approved: 4/24/2018 Approved: 6/25/2019 Manufacturing Quality Control of Consumer [email protected] [email protected] Trampoline Bed Material Approved: 5/15/2014 ASTM F2687-2013 (R2019), Practice for Life ASTM F2748-2015, Specification for Low Energy [email protected] Cycle Cost Analysis of Commercial Food Air Guns Service Equipment Approved: 4/21/2015 ASTM F2785-2017, Specification for Polyamide Approved: 7/23/2019 [email protected] 12 Gas Pressure Pipe, Tubing, and Fittings [email protected] Approved: 5/30/2017 ASTM F2756-2011 (R2016), Test Method for [email protected] ASTM F2711-2008 (R2012), Test Methods for Determining Energy Consumption of Vacuum Bicycle Frames Cleaners ASTM F2785-2018, Specification for Polyamide Approved: 11/20/2012 Approved: 10/18/2016 12 Gas Pressure Pipe, Tubing, and Fittings [email protected] [email protected] Approved: 4/24/2018 [email protected] ASTM F2713-2014, Specification for Eye ASTM F2765-2014, Specification for Total Lead Protectors for Field Hockey Content in Synthetic Turf Fibers ASTM F2785-2018a, Specification for Polyamide Approved: 9/23/2014 Approved: 9/23/2014 12 Gas Pressure Pipe, Tubing, and Fittings [email protected] [email protected] Approved: 9/1/2018 [email protected] ASTM F2713-2018, Specification for Eye ASTM F2767-2017, Specification for Protectors for Field Hockey Electrofusion Type Polyamide-12 Fittings for ASTM F2788-2018, Specification for Metric and Approved: 9/15/2018 Outside Diameter Controlled Polyamide-12 Inch-sized Crosslinked Polyethylene (PEX) [email protected] Pipe and Tubing for Gas Distribution Pipe Approved: 5/30/2017 Approved: 2/20/2018 ASTM F2727-2009 (R2014), Guide for [email protected] [email protected] Manufacturers for Labeling Headgear Products ASTM F2788-2019, Specification for Metric and Approved: 11/25/2014 Inch-sized Crosslinked Polyethylene (PEX) [email protected] Pipe Approved: 4/30/2019 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 163 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F2788-2019, Specification for Metric and ASTM F2806-2017, Specification for ASTM F2830-2017 (R2017), Specification for Inch-sized Crosslinked Polyethylene (PEX) Acrylonitrile-Butadiene-Styrene (ABS) Plastic Manufacture and Joining of Polyethylene (PE) Pipe Pipe (Metric SDR-PR) Gas Pressure Pipe With a Peelable Approved: 8/20/2019 Approved: 5/30/2017 Polypropylene (PP) Outer Layer [email protected] [email protected] Approved: 8/22/2017 [email protected] ASTM F2793-2014, Specification for Bicycle ASTM F2810-2015, Specification for Elliptical Grips Trainers ASTM F2830-2017, Specification for Approved: 9/23/2014 Approved: 12/22/2015 Manufacture and Joining of Polyethylene (PE) [email protected] [email protected] Gas Pressure Pipe with a Peelable Polypropylene (PP) Outer Layer ASTM F2795-2015, Test Method for ASTM F2811-2015, Test Methods for Evaluating Approved: 5/30/2017 Performance of Self-Contained Soft Serve Design and Performance Characteristics of [email protected] and Shake Machines Elliptical Trainers Approved: 3/24/2015 Approved: 12/22/2015 ASTM F2834-2010 (R2017), Specification for [email protected] [email protected] Induction Cooktops, Counter Top, Drop-in Mounted, or Floor Standing ASTM F2795-2018, Test Method for ASTM F2812-2012 (R2018), Specification for Approved: 11/21/2017 Performance of Self-Contained Soft Serve Goggle- and Spectacle-Type Eye Protectors [email protected] and Shake Freezers for Selected Motor Sports Approved: 9/25/2018 Approved: 4/24/2018 ASTM F2835-2010 (R2017), Specification for [email protected] [email protected] Underfired Broilers Approved: 11/21/2017 ASTM F2796-2019, Specification for Hot Food ASTM F2817-2017 (R2019), Specification for [email protected] Holding Tables Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe Approved: 3/26/2019 and Fittings For Maintenance or Repair ASTM F2842-2011 (R2017), Specification for [email protected] Approved: 5/1/2019 Reins Used in Thoroughbred and Quarter [email protected] Horse Racing ASTM F2797-2019, Reinstatement of Test Approved: 4/28/2017 Method for Evaluating Edge Cleaning ASTM F2817-2017, Specification for Poly(Vinyl [email protected] Effectiveness of Vacuum Cleaners Chloride) (PVC) Gas Pressure Pipe and Fittings Approved: 7/9/2019 For Maintenance or Repair ASTM F2843-2010 (R2015), Specification for [email protected] Approved: 5/30/2017 Condition 0 Bicycle Frames [email protected] Approved: 10/20/2015 ASTM F2798-2009 (R2018), Specification for [email protected] Sealless Lube Oil Pump with Oil Through ASTM F2818-2017 (R2019), Specification for Motor for Marine Applications Specification for Crosslinked Polyethylene ASTM F2843-2019, Specification for Condition 0 Approved: 5/22/2018 (PEX) Material Gas Pressure Pipe and Tubing Bicycle Frames [email protected] Approved: 8/20/2019 Approved: 6/25/2019 [email protected] [email protected] ASTM F2800-2011 (R2017), Specification for Recirculating Hood System for Cooking ASTM F2826-2014 (R2018), Test Method for ASTM F2844-2011 (R2015), Test Method for Appliances Evaluating the Sustained Air Performance Displacement Compression of Softball and Approved: 4/28/2017 and Exhaust Emission Efficiencies of Central Baseball Bat Barrels [email protected] Vacuum Cleaning Units Approved: 10/20/2015 Approved: 5/22/2018 [email protected] ASTM F2801-2011 (R2015), Practice for [email protected] Paintball Player Safety Briefing ASTM F2844-2015 (R2016), Test Method for Approved: 4/21/2015 ASTM F2828-2012, Test Method For Measuring Displacement Compression of Softball and [email protected] The Carpet Cleaning Effectiveness Of Wet Baseball Bat Barrels Extraction Cleaners Approved: 4/19/2016 ASTM F2801-2019, Practice for Paintball Player Approved: 7/1/2012 [email protected] Safety Briefing [email protected] Approved: 7/1/2019 ASTM F2845-2014, Test Method for Measuring [email protected] ASTM F2829-2017, Specification for Metric- and the Dynamic Stiffness (DS) and Cylindrical Inch-Sized Crosslinked Polyethylene (PEX) Coefficient of Restitution (CCOR) of Baseballs ASTM F2802-2009 (R2015), Specification for Pipe Systems and Softballs Condition 1 Bicycle Frames Approved: 5/30/2017 Approved: 3/1/2014 Approved: 10/20/2015 [email protected] [email protected] [email protected]

ASTM F2802-2019, Specification for Condition 1 Bicycle Frames Approved: 6/25/2019 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 164 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F2854-2016, Specification for Push-Fit ASTM F2875-2010 (R2015), Guide for ASTM F2899-2011 (R2016), Specification for Crosslinked Polyethylene (PEX) Mechanical Laboratory Requirements Necessary to Test Condition 1 Bicycle Forks Fittings for Crosslinked Polyethylene (PEX) Commercial Cooking and Warming Approved: 10/18/2016 Tubing Appliances to ASTM Test Methods [email protected] Approved: 8/23/2016 Approved: 3/24/2015 [email protected] [email protected] ASTM F2904-2011 (R2015), Specification for Warnings on Paintball Marker Accessories ASTM F2855-2017, Specification for Chlorinated ASTM F2876-2010 (R2015), Practice for Used In the Sport of Paintball Poly(Vinyl Chloride)/Aluminum/Chlorinated Thermal Rating and Installation of Internal Approved: 4/21/2015 Poly(Vinyl Chloride) (CPVC-AL-CPVC) Combustion Engine Packages for use in [email protected] Composite Pressure Tubing Hazardous Locations in Marine Applications Approved: 5/30/2017 Approved: 5/26/2015 ASTM F2916-2019, Practice for Environmental [email protected] [email protected] Impact Analysis of Commercial Food Service Equipment ASTM F2855-2019, Specification for Chlorinated ASTM F2877/F2877M-2013 (R2019), Test Approved: 1/15/2019 Poly(Vinyl Chloride)/Aluminum/Chlorinated Method for Shock Testing of Structural [email protected] Poly(Vinyl Chloride) (CPVC-AL-CPVC) Insulation of A-Class Divisions Constructed of Composite Pressure Tubing Steel or Aluminum ASTM F2917-2012 (R2018), Specification for Approved: 4/30/2019 Approved: 5/21/2019 Bicycle Trailer Cycles Designed for Human [email protected] [email protected] Passengers Approved: 4/24/2018 ASTM F2856-2012 (R2016), Practice for ASTM F2879-2016, Specification for Eye [email protected] Transfilling and Safe Handling of Small CO2 Protective Devices for Airsoft Sports Cylinders for Use in Paintball Approved: 11/22/2016 ASTM F2918-2011 (R2015), Test Method for Approved: 4/19/2016 [email protected] Weighing a Bicycle [email protected] Approved: 10/20/2015 ASTM F2879-2018, Specification for Eye [email protected] ASTM F2861-2015, Test Method for Enhanced Protective Devices for Airsoft Sports Performance of Combination Oven in Various Approved: 4/24/2018 ASTM F2929-2017, Specification for Crosslinked Modes [email protected] Polyethylene (PEX) Tubing of 0.070 in. Wall Approved: 11/17/2015 and Fittings for Radiant Heating Systems up [email protected] ASTM F2879-2019, Specification for Eye to 75 psig Protective Devices for Airsoft Sports Approved: 12/1/2017 ASTM F2861-2017, Test Method for Enhanced Approved: 4/30/2019 [email protected] Performance of Combination Oven in Various [email protected] Modes ASTM F2934-2012 (R2018), Specification for Approved: 11/21/2017 ASTM F2880-2017, Specification for Lap-Joint Circular Metallic Bellows Type Expansion [email protected] Type Flange Adapters for Polyethylene Joint for HVAC Piping Applications Pressure Pipe in Nominal Pipe Sizes 34 in. to Approved: 3/20/2018 ASTM F2863-2011 (R2016), Specification for 65 in. [email protected] Central Vacuum Hose Inlet Valve Socket Approved: 5/31/2017 Dimensions [email protected] ASTM F2935-2012 (R2018), Specification for Approved: 10/18/2016 Chocks, Panama, Mooring Cast Steel [email protected] ASTM F2891-2015, Specification for Approved: 3/20/2018 Commercial Bulk Milk Dispensers, [email protected] ASTM F2867-2013, Terminology Relating to Mechanically Refrigerated Thoroughbred Horse Racing Surfaces Approved: 8/24/2015 ASTM F2936-2012 (R2018), Specification for Approved: 11/15/2013 [email protected] Chocks, Ship Mooring, Cast Steel [email protected] Approved: 3/20/2018 ASTM F2897-2017, Specification for Tracking [email protected] ASTM F2868-2010 (R2015), Specification for and Traceability Encoding System of Natural Condition 2 Bicycle Frames Gas Distribution Components (Pipe, Tubing, ASTM F2940-2013 (R2017), Practice for Air Soft Approved: 10/20/2015 Fittings, Valves, and Appurtenances) Field Operation [email protected] Approved: 5/30/2017 Approved: 4/28/2017 [email protected] [email protected] ASTM F2868-2019, Specification for Condition 2 Bicycle Frames ASTM F2898-2011, Test Method For ASTM F2941-2013 (R2017), Practice for Air Soft Approved: 6/25/2019 Permeability Of Synthetic Turf Sports Field Player Safety Briefing [email protected] Base Stone And Surface System By Non- Approved: 4/28/2017 confined Area Flood Test Method [email protected] Approved: 3/29/2011 [email protected] ASTM F2945-2017, Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings Approved: 5/30/2017 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 165 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F2945-2018, Specification for Polyamide ASTM F2987-2017, Specification for Corrugated ASTM F3022-2014, Test Method for Evaluating 11 Gas Pressure Pipe, Tubing, and Fittings Polyethylene Pipe and Fittings for Mine Heap the Universal Design of Fitness Equipment for Approved: 9/1/2018 Leach Aeration Applications Inclusive Use by Persons with Functional [email protected] Approved: 5/30/2017 Limitations and Impairments [email protected] Approved: 9/23/2014 ASTM F2946-2017 (R2017), Specification for [email protected] PVC Hub and Elastomeric Seal (Gasket) Tee ASTM F2988-2018, Specification for Connection for Joining Plastic Pipe to Insitu Commercial Coffee Brewers ASTM F3022-2015, Test Method for Evaluating Pipelines and Manholes Approved: 10/23/2018 the Universal Design of Fitness Equipment for Approved: 8/22/2017 [email protected] Inclusive Use by Persons with Functional [email protected] Limitations and Impairments ASTM F2990-2012 (R2018), Test Method for Approved: 4/21/2015 ASTM F2946-2017, Specification for PVC Hub Commercial Coffee Brewers [email protected] and Elastomeric Seal (Gasket) Tee Approved: 10/23/2018 Connection for Joining Plastic Pipe to in situ [email protected] ASTM F3022-2016, Test Method for Evaluating Pipelines and Manholes the Universal Design of Fitness Equipment for Approved: 5/31/2017 ASTM F2991-2013, Guide For Doubler Plate Inclusive Use by Persons with Functional [email protected] Repairs For Non-Classed Ship Structures Limitations and Impairments Approved: 2/1/2013 Approved: 10/18/2016 ASTM F2949-2018, Specification for Pole Vault [email protected] [email protected] Box Collars Approved: 4/24/2018 ASTM F3012-2014, Specification for Loose-Fill ASTM F3023-2018, Test Methods for Evaluating [email protected] Rubber for Use as a Playground Safety Design and Performance Characteristics of Surface under and around Playground Stationary Upright and Recumbent Exercise ASTM F2968/F2968M-2014, Specification for Equipment Bicycles and Upper Body Ergometers Black Crosslinked Polyethylene (PEX) Pipe, Approved: 5/1/2014 Approved: 6/26/2018 Fittings and Joints for Gas Distribution [email protected] [email protected] Applications Approved: 4/22/2014 ASTM F3013-2013 (R2018), Test Method for ASTM F3034-2017, Specification for Billets [email protected] Density of Topsoil and Blended Soils In-place Made by Winding Molten Extruded Stress- by the Core Displacement Method Rated High Density Polyethylene (HDPE) ASTM F2969-2017, Specification for Approved: 10/23/2018 Approved: 5/30/2017 Acrylonitrile-Butadiene-Styrene (ABS) IPS [email protected] [email protected] Dimensioned Pressure Pipe Approved: 5/30/2017 ASTM F3021-2014, Specification for Universal ASTM F3040-2013 (R2018), Test Method for [email protected] Design of Fitness Equipment for Inclusive Use Mechanical Static Load Testing of Non- by Persons with Functional Limitations and Structural Marine Joiner Bulkheads ASTM F2975-2012 (R2017), Test Method for Impairments Approved: 4/24/2018 Measuring the Field Performance of Approved: 9/23/2014 [email protected] Commercial Kitchen Ventilation Systems [email protected] Approved: 4/28/2017 ASTM F3051-2014 (R2019), Test Method for [email protected] ASTM F3021-2015, Specification for Universal Performance of Cook-and-Hold Ovens Design of Fitness Equipment for Inclusive Use Approved: 5/21/2019 ASTM F2976-2013 (R2019), Practice for by Persons with Functional Limitations and [email protected] Determining the Field Performance of Impairments Commercial Kitchen Demand Control Approved: 4/21/2015 ASTM F3051-2014, Test Method Ventilation Systems [email protected] ForPerformance of Cook-and-Hold Ovens Approved: 5/21/2019 Approved: 1/21/2014 [email protected] ASTM F3021-2016, Specification for Universal [email protected] Design of Fitness Equipment for Inclusive Use ASTM F2983-2013 (R2018), Guide for by Persons with Functional Limitations and ASTM F3052-2014, Standard Guide for Manufacturers for Labeling and Care Impairments Conducting Small Boat Stability Test Instructions for Wrestling Mats Approved: 10/18/2016 (Deadweight Survey and Air Inclining Approved: 11/20/2018 [email protected] Experiment) to Determine Lightcraft Weight [email protected] and Centers of Gravity of a Small Craft ASTM F3021-2017, Specification for Universal Approved: 1/21/2014 ASTM F2987-2017 (R2018), Specification for Design of Fitness Equipment for Inclusive Use [email protected] Corrugated Polyethylene Pipe and Fittings for by Persons with Functional Limitations and Mine Heap Leach Aeration Applications Impairments ASTM F3059-2015, Specification for Fiber- Approved: 2/20/2018 Approved: 4/28/2017 Reinforced Polymer (FRP) Gratings Used in [email protected] [email protected] Marine Construction and Shipbuilding Approved: 11/15/2015 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 166 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F3059-2018, Specification for Fiber- ASTM F3124-2017, Practice for Data Recording ASTM F3190-2017, Practice for Heat Fusion Reinforced Polymer (FRP) Gratings Used in the Procedure used to Produce Heat Butt Equipment (HFE) Operator Qualification on Marine Construction and Shipbuilding Fusion Joints in Plastic Piping Systems or Polyethylene (PE) and Polyamide (PA) Pipe Approved: 7/17/2018 Fittings and Fittings [email protected] Approved: 5/31/2017 Approved: 5/31/2017 [email protected] [email protected] ASTM F3077-2017, Specification for Eye Protectors for Womens Lacrosse ASTM F3128-2017, Test Method for Treestand ASTM F3202-2019, Specification for Solid Wall Approved: 7/1/2017 Repetitive Loading Capability Poly (Vinyl Chloride) PVC Fittings for Joining [email protected] Approved: 5/30/2017 Corrugated Wall High Density Polyethylene [email protected] (PE) and Polypropylene (PP) Piping ASTM F3085-2014 (R2018), Specification for Air Approved: 8/20/2019 Soft Gun Barrel Blocking Devices ASTM F3128-2018, Specification for Poly(Vinyl [email protected] Approved: 6/26/2018 Chloride) (PVC) Schedule 40 Drain, Waste, [email protected] and Vent Pipe with a Cellular Core ASTM F3215-2016, Specification ForFood Waste Approved: 11/20/2018 Dehydrators ASTM F3100-2015, Practice for Low Impact [email protected] Approved: 10/18/2016 Paintball Field Operation [email protected] Approved: 3/15/2015 ASTM F3128-2019, Specification for Poly(Vinyl [email protected] Chloride) (PVC) Schedule 40 Drain, Waste, ASTM F3216-2016, Test Method ForStandard and Vent Pipe with a Cellular Core Test Method for the Performance of Retherm ASTM F3101-2015, Specification for Approved: 3/21/2019 Ovens Unsupervised Public Use Outdoor Fitness [email protected] Approved: 10/18/2016 Equipment [email protected] Approved: 4/21/2015 ASTM F3137-2015, Headgear Used in Women’s [email protected] Lacrosse (excluding goalkeepers) ASTM F3226-2016, Specification ForMetallic Approved: 7/1/2015 Press-Connect Fittings for Piping and Tubing ASTM F3102-2015, Guide for Specifying, [email protected] Systems Measuring, and Managing Impact Approved: 12/20/2016 Attenuation of Synthetic Turf Playing Systems ASTM F3146-2018, Test Method for Impact [email protected] Approved: 1/1/2015 Attenuation of Turf Playing Systems [email protected] Designated for Rugby ASTM F3226-2019, Specification for Metallic Approved: 8/1/2018 Press-Connect Fittings for Piping and Tubing ASTM F3103-2014, Specification for Testing Off- [email protected] Systems Road Motorcycle and ATV Helmets Approved: 8/1/2019 Approved: 9/23/2014 ASTM F3150-2018, Specification for HEPA [email protected] [email protected] Filtration System Performance of Residential and Commercial Vacuum Cleaners ASTM F3248-2017, Method ForDetermining ASTM F3104-2014, Test Methods for Evaluating Approved: 10/1/2018 Vertical Deformation and Area Deflection of Design and Performance Characteristics of [email protected] Area Elastic, Point Elastic, Combined Elastic Externally Loaded Strength Training and Mixed Elastic Sport and Dance Surfaces Equipment, Strength Training Benches and ASTM F3164-2019, Specification forEye Approved: 12/26/2017 External Weight Storage Equipment Protectors for Racket Sports (Racquetball, [email protected] Approved: 9/23/2014 Squash, Tennis) [email protected] Approved: 7/1/2019 ASTM F3249-2017, Specification for Treestands, [email protected] Climbing Sticks and Tripod or Tower Stands ASTM F3105-2014, Specification for Externally Approved: 6/15/2017 Loaded Strength Training Equipment, ASTM F3165-2016, Specification for Throat [email protected] Strength Training Benches and External Protective Equipment for Hockey Weight Storage Equipment Goaltenders ASTM F3253-2017, Specification ForCrosslinked Approved: 9/23/2014 Approved: 3/15/2016 Polyethylene (PEX) Tubing with Oxygen [email protected] [email protected] Barrier for Hot- and Cold-Water Hydronic Distribution Systems ASTM F3123-2018, Specification for Metric ASTM F3188-2016, Specification for Crumb Approved: 12/1/2017 Outside Diameter Polyethylene (PE) Plastic Rubber Used as Synthetic Turf Infill [email protected] Pipe (DR-PN) Approved: 6/1/2016 Approved: 4/24/2018 [email protected] ASTM F3253-2018, Specification for Crosslinked [email protected] Polyethylene (PEX) Tubing with Oxygen ASTM F3189-2017, Test Method ForMeasuring Barrier for Hot- and Cold-Water Hydronic ASTM F3123-2018a, Specification for Metric Force Reduction, Vertical Deformation, and Distribution Systems Outside Diameter Polyethylene (PE) Plastic Energy Restitution of Synthetic Turf Systems Approved: 8/21/2018 Pipe (DR-PN) using the Advanced Artificial Athlete [email protected] Approved: 11/1/2018 Approved: 1/1/2017 [email protected] [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 167 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F3255-2019, Specification forRapid pull ASTM F3340-2018, Test Method forThermal ASTM F381-2015, Safety Specification for down refrigerators (Blast Chillers), freezers Resistance of Camping Mattresses Using a Components, Assembly, Use, and Labeling of (blast freezers), combination Guarded Hot Plate Apparatus Consumer Trampolines refrigerator/freezer (blast chiller/freezers), Approved: 10/23/2018 Approved: 7/1/2015 and quick chillers for commercial use [email protected] [email protected] Approved: 3/26/2019 [email protected] ASTM F3346-2019, Specification ASTM F381-2016, Safety Specification for forPolyethylene of Raised Components, Assembly, Use, and Labeling of ASTM F3256-2017, Guide for Reporting and Temperature/Aluminum/Polyethylene of Consumer Trampolines Recording of Near Misses for Maritime Raised Temperature (PE-RT/AL/PE-RT) Approved: 6/1/2016 Industry Composite Pressure Pipe [email protected] Approved: 5/23/2017 Approved: 6/1/2019 [email protected] [email protected] ASTM F395-2010 (R2018), Terminology Relating to Vacuum Cleaners ASTM F3257-2017, Guide for Design, ASTM F3347-2018, Specification forMetal Press Approved: 3/20/2018 Construction and Operation of Vessels Insert Fittings with Factory Assembled [email protected] Providing Accommodation Service to Stainless Steel Press Sleeve for SDR9 Cross- Offshore Installations linked Polyethylene (PEX) Tubing ASTM F395-2019, Terminology Relating to Approved: 5/23/2017 Approved: 11/20/2018 Vacuum Cleaners [email protected] [email protected] Approved: 4/30/2019 [email protected] ASTM F3284-2018, Guide ForRecording and ASTM F3347-2019, Specification for Metal Press Reporting of Injuries and Illnesses for the Insert Fittings with Factory Assembled ASTM F400-2019, Consumer Safety Maritime Industry Stainless Steel Press Sleeve for SDR9 Cross- Specification for Lighters Approved: 2/1/2018 linked Polyethylene (PEX) Tubing Approved: 5/1/2019 [email protected] Approved: 4/30/2019 [email protected] [email protected] ASTM F3285-2018, Guide ForInstallation and ASTM F402-2017, Practice for Safe Handling of Application of Type C Portable Tanks for ASTM F3348-2018, Specification forPlastic Press Solvent Cements, Primers, and Cleaners Used Marine LNG Service Insert Fittings with Factory Assembled for Joining Thermoplastic Pipe and Fittings Approved: 5/15/2018 Stainless Steel Press Sleeve for SDR9 Cross- Approved: 5/31/2017 [email protected] linked Polyethylene (PEX) Tubing [email protected] Approved: 11/20/2018 ASTM F3286-2018, Guide For Cybersecurity and [email protected] ASTM F402-2018, Practice for Safe Handling of Cyberattack Mitigation Solvent Cements, Primers, and Cleaners Used Approved: 10/2/2018 ASTM F3348-2019, Specification for Plastic for Joining Thermoplastic Pipe and Fittings [email protected] Press Insert Fittings with Factory Assembled Approved: 8/21/2018 Stainless Steel Press Sleeve for SDR9 Cross- [email protected] ASTM F3312-2018, Practice forLiquefied linked Polyethylene (PEX) Tubing Natural Gas (LNG) Bunkering Hose Transfer Approved: 4/30/2019 ASTM F409-2017, Specification for Assembly [email protected] Thermoplastic Accessible and Replaceable Approved: 6/26/2018 Plastic Tube and Tubular Fittings [email protected] ASTM F3353-2019, Guide forDesign Guidance Approved: 4/28/2017 for Shipboard use of Lithium Based Batteries [email protected] ASTM f3313-2018, Test Method forDetermining Approved: 2/15/2019 Impact Attenuation of Playground Surfaces [email protected] ASTM F420-1999 (R2014), Test Method for Within the Use Zone of Playground Access Depth Under Furniture of Vacuum Equipment as tested in the field ASTM F3371-2019, Specification forPolyolefin Cleaners Approved: 12/1/2018 Pipe and Fittings for Drainage, Waste, and Approved: 11/25/2014 [email protected] Vent Applications [email protected] Approved: 4/30/2019 ASTM F3313-2019, Test Method for [email protected] ASTM F430-2013 (R2018), Specification for Determining Impact Attenuation of Paper Used for Vacuum Cleaner Filter Bags Playground Surfaces Within the Use Zone of ASTM F3383-2019, Test Method forFilament Approved: 10/23/2018 Playground Equipment as Tested in the Field Bind of single fibers in Synthetic turf [email protected] Approved: 9/1/2019 Approved: 6/25/2019 [email protected] [email protected] ASTM F431-1999 (R2013), SPECIFICATION FOR AIR PERFORMANCE MEASUREMENT PLENUM ASTM F3328-2018, Practice forthe One-Step ASTM F355-2016, Test Method for Impact CHAMBER FOR VACUUM CLEANERS (Solvent Cement Only) Method of Joining Attenuation of Playing Surface Systems and Approved: 05/21/2013 Poly (Vinyl Chloride) (PVC) or Chlorinated Materials [email protected] Poly (Vinyl Chloride) (CPVC) Pipe and Piping Approved: 7/1/2016 Components with Tapered Sockets [email protected] Approved: 8/21/2018 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 168 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F437-2017, Specification for Threaded ASTM F493-2017, Specification for Solvent ASTM F608-2018, Test Method for Evaluation Chlorinated Poly(Vinyl Chloride) (CPVC) Cements for Chlorinated Poly(Vinyl Chloride) of Carpet Embedded Dirt Removal Plastic Pipe Fittings, Schedule 80 (CPVC) Plastic Pipe and Fittings Effectiveness of Household/Commercial Approved: 5/31/2017 Approved: 5/31/2017 Vacuum Cleaners [email protected] [email protected] Approved: 5/22/2018 [email protected] ASTM F438-2017, Specification for Socket-Type ASTM F494-2011 (R2016), Test Methods for Chlorinated Poly(Vinyl Chloride) (CPVC) Evaluating Primary Disposable Bag Integrity ASTM F609-2013, Test Method for Using a Plastic Pipe Fittings, Schedule 40 for Vacuum Cleaners Horizontal Pull Slipmeter (HPS) Approved: 5/31/2017 Approved: 4/19/2016 Approved: 9/1/2013 [email protected] [email protected] [email protected]

ASTM F438-2017a, Specification for Socket- ASTM F512-2017, Specification for Smooth-Wall ASTM F628-2018, Specification for Acrylonitrile- Type Chlorinated Poly(Vinyl Chloride) (CPVC) Poly(Vinyl Chloride) (PVC) Conduit and Butadiene-Styrene (ABS) Schedule 40 Plastic Plastic Pipe Fittings, Schedule 40 Fittings for Underground Installation Drain, Waste, and Vent Pipe With a Cellular Approved: 8/22/2017 Approved: 4/28/2017 Core [email protected] [email protected] Approved: 12/18/2018 [email protected] ASTM F439-2017, Specification for Chlorinated ASTM F513-2012 (R2018), Specification for Eye Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Face Protective Equipment for Hockey ASTM F645-2018, Guide for Selection, Design, Fittings, Schedule 80 Players and Installation of Thermoplastic Water- Approved: 5/31/2017 Approved: 4/24/2018 Pressure Piping Systems [email protected] [email protected] Approved: 1/1/2018 [email protected] ASTM F439-2019, Specification for Chlorinated ASTM F539-2002 (R2017), Practice for Fitting Poly (Vinyl Chloride) (CPVC) Plastic Pipe Athletic Footwear ASTM F645-2018, Guide for Selection, Design, Fittings, Schedule 80 Approved: 9/19/2017 and Installation of Thermoplastic Water- Approved: 8/20/2019 [email protected] Pressure Piping Systems [email protected] Approved: 3/1/2018 ASTM F555-2006 (R2016), Test Method for [email protected] ASTM F441/F441M-2017, Specification for Motor Life Evaluation of an Upright Vacuum Chlorinated Poly(Vinyl Chloride) (CPVC) Cleaner ASTM F645-2018a, Guide for Selection, Design, Plastic Pipe, Schedules 40 and 80 Approved: 10/18/2016 and Installation of Thermoplastic Water- Approved: 5/16/2017 [email protected] Pressure Piping Systems [email protected] Approved: 11/1/2018 ASTM F558-2017, Test Method for Measuring [email protected] ASTM F442-2019, Specification for Chlorinated Air Performance Characteristics of Vacuum Poly(Vinyl Chloride) (CPVC) Plastic Pipe Cleaners ASTM F655-2013, SPECIFICATION FOR TEST (SDRPR) Approved: 3/1/2017 CARPETS AND PADS FOR VACUUM CLEANER Approved: 8/20/2019 [email protected] TESTING [email protected] Approved: 06/01/2013 ASTM F558-2017a, Test Method for Measuring [email protected] ASTM F450-2013, Test Methods for Vacuum Air Performance Characteristics of Vacuum Cleaner Hose - Durability and Reliability Cleaners ASTM F656-2017, Specification for Primers for (Plastic) Approved: 9/19/2017 Use in Solvent Cement Joints of Poly(Vinyl Approved: 05/21/2013 [email protected] Chloride) (PVC) Plastic Pipe and Fittings [email protected] Approved: 5/31/2017 ASTM F558-2018, Test Method for Measuring [email protected] ASTM F477-2017, Specification for Elastomeric Air Performance Characteristics of Vacuum Seals (Gaskets) for Joining Plastic Pipe Cleaners ASTM F659-2010 (R2018), Specification for Ski Approved: 5/31/2017 Approved: 10/23/2018 and Snowboard Goggles [email protected] [email protected] Approved: 11/20/2018 [email protected] ASTM F480-2017, Specification for ASTM F608-2017, Test Method for Evaluation Thermoplastic Well Casing Pipe and of Carpet Embedded Dirt Removal ASTM F670-2017, Specification for Tanks, 5 and Couplings Made in Standard Dimension Effectiveness of Household/Commercial 10-Gal (20 and 40-L) Lube Oil Dispensing Ratios (SDR), SCH 40 and SCH 80 Vacuum Cleaners Approved: 5/23/2017 Approved: 5/30/2017 Approved: 3/1/2017 [email protected] [email protected] [email protected] ASTM F681-1982 (R2018), Practice for Use of ASTM F486-2001 (R2018), Practice for Branch Connections Preparation of Use and Care Booklets for Approved: 9/1/2018 Vacuum Cleaners [email protected] Approved: 3/20/2018 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 169 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F682-1982A (R2018), Specification for ASTM F760-1993 (R2017), Specification for ASTM F825-1993 (R2017), Specification for Wrought Carbon Steel Sleeve-Type Pipe Food Service Equipment Manuals Drawers, Furniture, Marine, Steel Couplings Approved: 11/21/2017 Approved: 1/1/2017 Approved: 9/1/2018 [email protected] [email protected] [email protected] ASTM F765-2017, Specification for Wildcats, ASTM F826-1994 (R2017), Specification for ASTM F683-2014, Practice for Selection and Ship Anchor Chain Tops, Furniture, Marine, Steel Application of Thermal Insulation for Piping Approved: 5/23/2017 Approved: 1/1/2017 and Machinery [email protected] [email protected] Approved: 8/1/2014 [email protected] ASTM F782-2001 (R2012), Specification for ASTM F841-84 (R2011), Specification for Doors, Furniture, Marine Thrusters, Tunnel, Permanently Installed In ASTM F697-2016, Standard Practice for Care Approved: 6/26/2012 Marine Vessels and Use of Athletic Mouth Protectors [email protected] Approved: 5/24/2011 Approved: 3/15/2016 [email protected] [email protected] ASTM F783-1988 (R2018), Specification for Staple, Handgrab, Handle, and Stirrup Rung ASTM F856-1997 (R2018), Practice for ASTM F704-1981 (R2014), Practice for Selecting Approved: 4/24/2018 Mechanical Symbols, Shipboard--Heating, Bolting Lengths for Piping System Flanged [email protected] Ventilation, and Air Conditioning (HVAC) Joints Approved: 9/1/2018 Approved: 11/25/2014 ASTM F803-2014, Specification for Eye [email protected] [email protected] Protectors for Selected Sports Approved: 6/1/2014 ASTM F857-2017, Specification for Hot Water ASTM F704-1981 (R2018), Practice for Selecting [email protected] and Chemical Sanitizing Commercial Bolting Lengths for Piping System Flanged Dishwashing Machines, Stationary Rack Type Joints ASTM F820-2016, Test Method for Measuring Approved: 12/26/2017 Approved: 9/1/2018 Air Performance Characteristics of Central [email protected] [email protected] Vacuum Cleaning Systems Approved: 10/18/2016 ASTM F858-2018, Specification for Hot Water ASTM F707/F707M-1981 (R2019), Specification [email protected] Sanitizing Commercial Dishwashing for Modular Gauge Boards Machines, Single Tank, Conveyor Rack Type Approved: 8/1/2019 ASTM F820-2017, Test Method for Measuring Approved: 5/22/2018 [email protected] Air Performance Characteristics of Central [email protected] Vacuum Cleaning Systems ASTM F708-1997 (R2018), Practice for Design Approved: 9/19/2017 ASTM F859-2015, Specification for Heat- and Installation of Rigid Pipe Hangers [email protected] Sanitizing Commercial Dishwashing Approved: 9/1/2018 Machines, Multiple Tank, Conveyor Rack [email protected] ASTM F820-2018, Test Method for Measuring Type Air Performance Characteristics of Central Approved: 9/18/2015 ASTM F714-2018 (R2019), Specification for Vacuum Cleaning Systems [email protected] Polyethylene (PE) Plastic Pipe (DR-PR) Based Approved: 10/23/2018 on Outside Diameter [email protected] ASTM F860-2007 (R2019), Specification for Hot Approved: 8/20/2019 Water Sanitizing Commercial Dishwashing [email protected] ASTM F821-2001 (R2018), Specification for Machines, Multiple Tank, Rackless Conveyor Domestic Use Doors and Frames, Steel, Type ASTM F718-2017, Specification for Shipbuilders Interior, Marine Approved: 12/18/2018 and Marine Paints and Coatings Approved: 4/24/2018 [email protected] Product/Procedure Data Sheet [email protected] Approved: 5/23/2017 ASTM F861-2014a, Specification for [email protected] ASTM F822-1993 (R2017), Specification for Commercial Dishwashing Racks Chest of Drawers (Chiffonier), Steel, Marine Approved: 12/15/2014 ASTM F721-2018, Specification for Gage Piping Approved: 1/1/2017 [email protected] Assemblies [email protected] Approved: 5/22/2018 ASTM F876-2017a, Specification for Crosslinked [email protected] ASTM F823-1993 (R2017), Specification for Polyethylene (PEX) Tubing Desk, Log, Marine, Steel, with Cabinet Approved: 8/22/2017 ASTM F722-1982 (R2014), Specification for Approved: 1/1/2017 [email protected] Welded Joints for Shipboard Piping Systems [email protected] Approved: 11/25/2014 ASTM F876-2019, Specification for Crosslinked [email protected] ASTM F824-1993 (R2017), Specification for Polyethylene (PEX) Tubing Tables, Mess, Marine, Steel Approved: 7/1/2019 ASTM F722-2018, Specification for Welded Approved: 1/1/2017 [email protected] Joints for Shipboard Piping Systems [email protected] Approved: 11/20/2018 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 170 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F876-2019, Specification for Crosslinked ASTM F905-2017, Practice for Qualification of ASTM F953-2014, Specification for Commercial Polyethylene (PEX) Tubing Polyethylene Saddle-Fused Joints Dishwashing Machines (Stationary Rack, Approved: 8/20/2019 Approved: 5/30/2017 Dump Type) Chemical Sanitizing [email protected] [email protected] Approved: 6/17/2014 [email protected] ASTM F877-2017, Specification for Crosslinked ASTM F906-1985 (R2014), Specification for Polyethylene (PEX) Hot- and Cold-Water Letters and Numerals for Ships ASTM F956-1991 (R2018), Specification for Bell, Distribution Systems Approved: 3/1/2014 Cast, Sound Signalling Approved: 5/30/2017 [email protected] Approved: 10/1/2018 [email protected] [email protected] ASTM F910-2010 (R2015), Specification for Face ASTM F877-2018, Specification for Crosslinked Guards for Youth Baseball ASTM F957-1991 (R2018), Specification for Polyethylene (PEX) Hot- and Cold-Water Approved: 4/21/2015 Gong, Sound Signaling Distribution Systems [email protected] Approved: 10/1/2018 Approved: 4/24/2018 [email protected] [email protected] ASTM F913-2017, Specification for Thermoplastic Elastomeric Seals (Gaskets) for ASTM F963-2016, Consumer Safety ASTM F877-2018a, Specification for Crosslinked Joining Plastic Pipe Specification for Toy Safety Polyethylene (PEX) Hot- and Cold-Water Approved: 5/31/2017 Approved: 8/1/2016 Distribution Systems [email protected] [email protected] Approved: 8/21/2018 [email protected] ASTM F917-2014, Specification for Commercial ASTM F963-2016a, Consumer Safety Food Waste Disposers Specification For Toy Safety ASTM F884-2011 (R2016), Test Method for Approved: 6/17/2014 Approved: 8/1/2016 Motor Life Evaluation of a Built-In (Central [email protected] [email protected] Vacuum) Vacuum Cleaner Approved: 10/18/2016 ASTM F918-2015, Specification for ASTM F963-2016b, Consumer Safety [email protected] Noncarbonated Mechanically Refrigerated Specification For Toy Safety Beverage Dispenser (Visible Product) Approved: 8/1/2016 ASTM F885-2017, Specification for Envelope Approved: 8/24/2015 [email protected] Dimensions for Bronze Globe Valves NPS 1/4 [email protected] to 2 ASTM F963-2016c, Consumer Safety Approved: 5/23/2017 ASTM F919-2015, Specification for Slicing Specification For Toy Safety [email protected] Machines, Food, Electric Approved: 8/1/2016 Approved: 9/18/2015 [email protected] ASTM F888-2011 (R2018), Test Method for [email protected] Measuring Maximum Function Volume of the ASTM F963-2016d, Consumer Safety Primary Dirt Receptacle in a Vacuum Cleaner ASTM F922-2011 (R2016), Test Method for Specification for Toy Safety Approved: 10/23/2018 Motor Life Evaluation of an Electric Approved: 8/1/2016 [email protected] Motorized Nozzle [email protected] Approved: 10/18/2016 ASTM F891-2016, Specification for Coextruded [email protected] ASTM F963-2016e, Consumer Safety Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Specification for Toy Safety Cellular Core ASTM F940-2000 (R2013), Practice for Quality Approved: 8/1/2016 Approved: 8/23/2016 Control Receipt Inspection Procedures for [email protected] [email protected] Protective Coatings (Paint), Used in Marine Construction and Shipbuilding ASTM F963-2016f, Consumer Safety ASTM F894-2017, Specification for Polyethylene Approved: 10/29/2013 Specification For Toy Safety (PE) Large Diameter Profile Wall Sewer and [email protected] Approved: 8/1/2016 Drain Pipe [email protected] Approved: 5/30/2017 ASTM F941-2000 (R2013), Practice for [email protected] Inspection of Marine Surface Preparation and ASTM F963-2016g, Consumer Safety Coating Application Specification For Toy Safety ASTM F894-2019, Specification for Polyethylene Approved: 10/29/2013 Approved: 8/1/2016 (PE) Large Diameter Profile Wall Sewer and [email protected] [email protected] Drain Pipe Approved: 3/5/2019 ASTM F952-2012 (R2017), Specification for ASTM F963-2016h, Consumer Safety [email protected] Mixing Machines, Food, Electric Specification For Toy Safety Approved: 12/26/2017 Approved: 8/1/2016 ASTM F905-2017 (R2018), Practice for [email protected] [email protected] Qualification of Polyethylene Saddle-Fused Joints ASTM F963-2016i, Consumer Safety Approved: 2/20/2018 Specification for Toy Safety [email protected] Approved: 8/1/2016 [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 171 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ASTM F963-2016j, Consumer Safety ASTM/ISO 55001-2016, Asset management - ATIS (ALLIANCE FOR Specification For Toy Safety Management systems - Requirements TELECOMMUNICATIONS INDUSTRY Approved: 8/1/2016 Approved: 2/2/2016 SOLUTIONS) [email protected] [email protected] ANSI/ATIS 0100001-2004 (S2018), User Plane ASTM F963-2017, Consumer Safety ASTM/ISO 55002-2016, Asset management - Security Guidelines and Requirements for ETS Specification for Toy Safety Management systems - Guidelines for the Approved: 2/6/2018 Approved: 5/23/2017 application of ISO 55001 Kerrianne Conn, (202) 434-8841, [email protected] [email protected] Approved: 2/2/2016 [email protected] ANSI/ATIS 0100005-2006 (S2016), Auditory ASTM F985-2018, Specification for Panama Non-Intrusive Quality Estimation Plus Canal Pilot Platform ASTM/ISO/IEC 17011-2004 (R2012), Conformity (ANIQUE+) Perceptual Model for Non- Approved: 4/24/2018 Assessment - General Requirements for Intrusive Estimation of Narrowband Speech [email protected] Accreditation bodies Accrediting Conformity Quality Assessment Bodies Approved: 5/13/2016 ASTM F986-1997 (R2018), Specification for Approved: 9/18/2012 Kerrianne Conn, (202) 434-8841, [email protected] Suction Strainer Boxes [email protected] Approved: 9/1/2018 ANSI/ATIS 0100008-2007 (S2017), Defects Per [email protected] ASTM/ISO/IEC 17020-1998 (R2012), General Million (DPM) Metric for Transaction Services criteria for the operation of various types of such as VoIP ASTM F987-2004 (R2017), Specification for bodies performing inspection Approved: 3/10/2017 Portable Intermediate Flush Deck Stanchion Approved: 9/18/2012 Kerrianne Conn, (202) 434-8841, [email protected] Approved: 1/1/2017 [email protected] [email protected] ANSI/ATIS 0100012-2019, Standard Outage ASTM/ISO/IEC 17024-2005 (R2012), Conformity Classification ASTM F992-2017, Specification for Valve Label assessment - General requirements for Approved: 7/15/2019 Plates bodies operating certification of persons Kerrianne Conn, (202) 434-8841, [email protected] Approved: 5/23/2017 Approved: 9/18/2012 [email protected] [email protected] ANSI/ATIS 0100017-2008 (S2018), Reduced Reference Video Calibration Estimation ASTM F993-2017, Specification for Valve ASTM/ISO/IEC 17025-2005 (R2012), General Method Locking Devices Requirements for the Competence of Testing Approved: 2/6/2018 Approved: 5/23/2017 and Calibration Laboratories Kerrianne Conn, (202) 434-8841, [email protected] [email protected] Approved: 9/18/2012 [email protected] ANSI/ATIS 0100020-2008 (S2018), Quantifying ASTM F994-1986 (R2018), Specification for the Impact on IP Service Availability from Design and Installation of Overboard IEEE/ASTM SI 10-2011, Standard for Use of the Network Element Outages Discharge Hull Penetration Connections International System of Units (SI): The Approved: 2/6/2018 Approved: 3/20/2018 Modern Metric System Kerrianne Conn, (202) 434-8841, [email protected] [email protected] Approved: 3/1/2011 [email protected] ANSI/ATIS 0100022-2008 (S2018), Priority ASTM F998-2012 (R2018), Specification for Classification Levels for Next Generation Centrifugal Pump, Shipboard Use ATCC (AMERICAN TYPE CULTURE Networks Approved: 3/20/2018 COLLECTION) Approved: 2/6/2018 [email protected] Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATCC ASN-0001.1-2015, ASTM WK57930-2019, Specification for of in vitro Assays to Determine Anthrax Toxin ANSI ATIS 0100024-2009 (R2014), User- Detonation Flame Arresters Activities Network Interface (UNI) Media Plane Security Approved: 8/1/2019 Approved: 5/19/2015 Standard for Evolving VoIP/Multimedia [email protected] [email protected] Networks Approved: 7/17/2014 ANSI/ATCC ASN-0002-2011, Authentication of ASTM WK61305-2019, Practice forSpecimen Kerrianne Conn, (202) 434-8841, [email protected] Preparation and Mounting of Plastic Human Cell Lines: Standardization of STR Composites for Use as Deck Boards, Stair Profiling ANSI/ATIS 0100027-2010 (R2015), Availability - Treads, Guards or Handrails to Assess Surface Approved: 1/25/2012 A Guide to Consistent Definitions Burning Characteristics [email protected] Approved: 1/8/2015 Approved: 9/1/2019 Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATCC ASN-0003-2015, Species-Level ASTM/ISO 55000-2016, Asset management - Identification of Animal Cells through ANSI/ATIS 0100030-2012 (R2017), Mean Time Overview, Principles and Terminology Mitochondrial Cytochrome c Oxidase Subunit between Outages - A Generalized Metric for 1 (CO1) DNA Barcodes Assessing Production Failure Rates in Approved: 2/2/2016 Approved: 12/22/2015 Telecommunications Network Elements [email protected] [email protected] Approved: 3/9/2017 Kerrianne Conn, (202) 434-8841, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 172 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI ATIS 0100036-2013 (R2018), Media Plane ANSI/ATIS 0100506-1997 (S2016), Network ANSI/ATIS 0100518-1998 (S2018), Objective Performance Security Impairments for Performance - Switched Exchange Access Measurement of Telephone Band Speech Evolving VoIP/Multimedia Networks Network Transmission Specifications Quality Using Measuring Normalizing Blocks Approved: 1/24/2018 Approved: 5/13/2016 (MNBs) Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Approved: 2/6/2018 Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0100037-2013 (R2018), Impact ANSI/ATIS 0100507-2002 (S2016), Network Weighted MTBF - A Metric for Assessing Performance Parameters for Circuit-Switched ANSI/ATIS 0100519-1999 (S2018), Reliability of Hierarchical Systems Digital Services - Definitions and Specifications for Transport of Generic Approved: 1/24/2018 Measurements Packets (including MPEG-2) Transport Kerrianne Conn, (202) 434-8841, [email protected] Approved: 5/13/2016 Packets) Over the DS Hierarchy Kerrianne Conn, (202) 434-8841, [email protected] Approved: 2/6/2018 ANSI/ATIS 0100302-1989 (S2016), Digital Kerrianne Conn, (202) 434-8841, [email protected] Processing of Voice-Band Signals-Line Format ANSI/ATIS 0100508-2003 (S2018), Loss Plan for for 32kbit/s Adaptive Differential Pulse-Code Digital Networks ANSI/ATIS 0100521-2005 (R2015), Packet Loss Modulation (ADPCM) Approved: 2/6/2018 Concealment for Use with ITU-T Approved: 5/13/2016 Kerrianne Conn, (202) 434-8841, [email protected] Recommendation G.711 Kerrianne Conn, (202) 434-8841, [email protected] Approved: 2/3/2015 ANSI/ATIS 0100509-1995 (S2018), Packetized Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0100302.a-1992 (S2016), Circuit Multiplication Equipment - Interface Supplement to ATIS-0100302.1989(R2006) - Specification ANSI ATIS 0100522-2000 (R2014), Quality of Digital Processing of Voice-Band Signals-Line Approved: 2/6/2018 Service for Business Multimedia Format for 32kbit/s Adaptive Differential Kerrianne Conn, (202) 434-8841, [email protected] Conferencing Pulse-Code Modulation (ADPCM) (Channel- Approved: 7/15/2014 Control Templates and Robbed-bit Signaling ANSI/ATIS 0100510-1999 (S2018), Network Kerrianne Conn, (202) 434-8841, [email protected] Alarm Transmission Performance Parameters for Dedicated Approved: 5/13/2016 Digital Services for Rates Up to and Including ANSI/ATIS 0100523-2019, ATIS Telecom Kerrianne Conn, (202) 434-8841, [email protected] DS3 - Specifications Glossary Approved: 2/6/2018 Approved: 7/19/2019 ANSI/ATIS 0100312-1991 (S2016), Voice Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Packetization-Packetized Voice Protocol Approved: 5/13/2016 ANSI/ATIS 0100511-2003 (S2018), B-ISDN ATM ANSI/ATIS 0100524-2004 (S2018), Reliability- Kerrianne Conn, (202) 434-8841, [email protected] Layer Cell Transfer Performance related Metrics and Terminology for Network Approved: 2/6/2018 Elements in Evolving Communications ANSI/ATIS 0100501-1994 (S2018), Network Kerrianne Conn, (202) 434-8841, [email protected] Networks Performance - Tandem Encoding Limits for 32 Approved: 2/6/2018 - kbit/s Adaptive Differential Pulse-Code ANSI/ATIS 0100512-1994 (S2018), Network Kerrianne Conn, (202) 434-8841, [email protected] Modulation (ADPCM) Performance - Point-to-Point Voice-Grade Approved: 2/6/2018 Special Access Network Voiceband Data ANSI/ATIS 0100801.01-1995 (S2016), Digital Kerrianne Conn, (202) 434-8841, [email protected] Transmission Objectives Transport of Video Teleconferencing/Video Approved: 2/6/2018 Telephony Signals - Video Test Scenes for ANSI/ATIS 0100502-2005 (R2015), System M- Kerrianne Conn, (202) 434-8841, [email protected] Subjective and Objective Performance NTSC Television Signals - Network Interface Assessment Specifications and Performance Parameters ANSI/ATIS 0100513-2003 (S2018), Frame Relay Approved: 5/13/2016 Approved: 1/8/2015 Data Communication Service - Access, User Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Information Transfer, Disengagement, and Availability Performance Parameters ANSI/ATIS 0100801.02-1996 (S2016), Digital ANSI/ATIS 0100503-2002 (S2016), Network Approved: 2/6/2018 Transport of Video Teleconferencing/Video Performance Parameters for Dedicated Kerrianne Conn, (202) 434-8841, [email protected] Telephony Signals - Performance Terms, Digital Services - Definitions and Definitions and Examples Measurements ANSI ATIS 0100514-2009 (R2014), Network Approved: 5/13/2016 Approved: 5/13/2016 Performance Parameters and Objectives for Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Dedicated Digital Services - SONET Bit Rates Approved: 7/15/2014 ANSI/ATIS 0100801.03-2003 (S2018), Digital ANSI/ATIS 0100504-1998 (S2016), Packet- Kerrianne Conn, (202) 434-8841, [email protected] Transport of One-Way Video Signals - Switched Data Communication Service - Parameters for Objective Performance Performance Parameters, Measurements ANSI/ATIS 0100517-1995 (S2016), Performance Assessment Methods, and Objectives Parameters and Objectives for Integrated Approved: 2/6/2018 Approved: 5/13/2016 Services Digital Network Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Approved: 5/13/2016 Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0100801.04-2005 (R2015), Multimedia Communications Delay, Synchronization, and Frame Rate Approved: 1/8/2015 Kerrianne Conn, (202) 434-8841, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 173 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ATIS 0100802.01-1996 (S2016), North ANSI/ATIS 0300202-2015, Internetwork ANSI/ATIS 0300212-2015, Enhanced American Adaptation for Domestic- Operations - Guidelines for Network Telecommunications Charge Card Physical International Interfaces of ETSI 300 174 Management of the Public Characteristics and Numbering Structure Digital Component Television Signals - Telecommunications Networks under Approved: 10/21/2015 Interface and Coding Specifications at DS-3 Disaster Conditions Kerrianne Conn, (202) 434-8841, [email protected] Approved: 5/13/2016 Approved: 6/17/2015 Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] ANSI ATIS 0300213-2014, Coded Identification of Equipment Entities of the North American ANSI/ATIS 0100803-1998 (S2018), Overview ANSI ATIS 0300204-2008 (S2018), Operations, Telecommunications System for Information and Reference for GSTN Multimedia Administration, Maintenance, and Exchange Terminals Provisioning (OAM&P) Lower-Layer Approved: 5/13/2014 Approved: 2/6/2018 Protocols for Telecommunications Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Management Network (TMN) Interfaces, Q and X Interfaces ANSI ATIS 0300216-2013 (R2018), Integrated ANSI/ATIS 0300002-2018, XML Schema Approved: 5/7/2018 Services Digital Network (ISDN) Management Interface for POTS Service Test Kerrianne Conn, (202) 434-8841, [email protected] – Basic Rate Physical Layer Approved: 6/13/2018 Approved: 11/29/2018 Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0300206-2001 (S2016), Digital Kerrianne Conn, (202) 434-8841, [email protected] Exchanges and PBXs - Digital Circuit Loopback ANSI/ATIS 0300003-2017, XML Schema Test Line with N [infinity] DS0 Capability ANSI ATIS 0300217-2013 (R2018), Integrated Interface for Fault Management (Trouble Approved: 9/16/2016 Service Digital Network (ISDN) Management Administration) Kerrianne Conn, (202) 434-8841, [email protected] – Primary Rate Physical Layer Approved: 1/3/2017 Approved: 8/23/2018 Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0300207-2000 (S2015), Operations, Kerrianne Conn, (202) 434-8841, [email protected] Administration, Maintenance, and ANSI/ATIS 0300007-2007 (S2017), Identification Provisioning (OAM&P) - Terminating Test ANSI/ATIS 0300218-2019, ISDN Management - of Physical Network Resources Line Access and Capabilities Data-Link and Network Layers Approved: 3/27/2017 Approved: 12/11/2015 Approved: 7/31/2019 Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected]

ANSI/ATIS 0300074-2015, Guidelines and ANSI ATIS 0300208-2013 (R2018), Operations, ANSI ATIS 0300219-2013 (R2019), Integrated Requirements for Security Management Administration, Maintenance, and Services Digital Network (ISDN) Management Systems Provisioning (OAM&P) Upper-Layer Protocols – Overview and Principles Approved: 1/7/2015 for Telecommunications Management Approved: 3/12/2019 Kerrianne Conn, (202) 434-8841, [email protected] Network (TMN) Interfaces, Q and X Interfaces Kerrianne Conn, (202) 434-8841, [email protected] Approved: 5/7/2018 ANSI/ATIS 0300075-2018, Usage Data Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0300220-2018, Structure for the Management Architecture and Protocols Representation of the Communications Requirements for Packet-Based Application ANSI/ATIS 0300209-2018, Operations, Industry Manufacturers, Suppliers, and Services Administration, Maintenance, and Related Service Companies for Information Approved: 3/29/2018 Provisioning (OAM&P) Network Tones and Exchange Kerrianne Conn, (202) 434-8841, [email protected] Announcements Approved: 11/29/2018 Approved: 6/13/2018 Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0300091-2018, Structure for Global Kerrianne Conn, (202) 434-8841, [email protected] Serialization of Information and ANSI/ATIS 0300221-1995 (S2015), Operations, Communications Technology (ICT) Network ANSI/ATIS 0300210-2015, OAM&P - Principles Administration, Maintenance, and Infrastructure Equipment of Functions, Architectures, and Protocol for Provisioning (OAM&P) - In-Service, Approved: 3/29/2018 Telecommunications Management Network Nonintrusive Measurement Device (INMD) - Kerrianne Conn, (202) 434-8841, [email protected] (TMN) Interfaces and enhanced Telecom Voice Service Measurements Operations Map (eTOM) Approved: 12/11/2015 ANSI/ATIS 0300094-2019, Trouble Type Codes Approved: 1/7/2015 Kerrianne Conn, (202) 434-8841, [email protected] in Support of ATIS Trouble Administration Kerrianne Conn, (202) 434-8841, [email protected] Standards ANSI/ATIS 0300223-2014, Structure and Approved: 7/31/2019 ANSI/ATIS 0300211-2018, Information Representation of Network Channel (NC) and Kerrianne Conn, (202) 434-8841, [email protected] Interchange -- Structure and Coded Network Channel Interface (NCI) Codes for Representation of National Security and Information Exchange ANSI/ATIS 0300097-2017, Structure for the Emergency Preparedness (NS/EP) Approved: 12/23/2014 Identification of Communications Telecommunications Service Priority (TSP) Kerrianne Conn, (202) 434-8841, [email protected] Connections for Information Exchange Codes for the North American Approved: 6/15/2017 Telecommunications System Kerrianne Conn, (202) 434-8841, [email protected] Approved: 6/12/2018 Kerrianne Conn, (202) 434-8841, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 174 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ATIS 0300226-2001 (S2016), Operations, ANSI/ATIS 0300236-2005 (S2016), Signaling ANSI ATIS 0300260-1998 (S2018), Operations, Administration, Maintenance, and System 7 (SS7) - ISDN User Part Compatibility Administration, Maintenance, and Provisioning (OAM&P) - Management of Testing Provisioning (OAM&P) - Extension to Generic Functions for Signalling System No. 7 (SS7) Approved: 9/16/2016 Network Information Model for Interfaces Network Interconnections Kerrianne Conn, (202) 434-8841, [email protected] between a Service Provider Administrative Approved: 9/16/2016 System and Network Elements for Lawfully Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0300239-1994 (S2015), Integrated Authorized Electronic Surveillance Services Digital Network (ISDN) Management Approved: 8/31/2018 ANSI/ATIS 0300230-2015, Telecommunications - User-Network Interface Protocol Profile Kerrianne Conn, (202) 434-8841, [email protected] Charge Card and Billed Number Screening Approved: 12/11/2015 Validation Message Components Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0300264-2010 (R2015), Alarm Approved: 10/21/2015 Surveillance in a Telecommunications Kerrianne Conn, (202) 434-8841, [email protected] ANSI ATIS 0300240-2014, Operations, Management Network (TMN) Administration, Maintenance and Approved: 12/11/2015 ANSI/ATIS 0300231-2019, Digital Hierarchy - Provisioning (OAM&P) - Generic Network Kerrianne Conn, (202) 434-8841, [email protected] Layer 1 in-Service Digital Transmission Information Model for Interfaces between Performance Monitoring Operations Systems and Network Elements ANSI/ATIS 0300269-2006 (S2016), Structure and Approved: 7/31/2019 Approved: 3/7/2014 Representation of Trace Message Formats for Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Information Exchange Approved: 11/22/2016 ANSI/ATIS 0300231.01-2019, Digital Subscriber ANSI/ATIS 0300241-1994 (S2015), Integrated Kerrianne Conn, (202) 434-8841, [email protected] Line (DSL) – Layer 1 In-Service Digital Services Digital Network (ISDN) Management Transmission Performance Monitoring - Service Profile Verification and Service ANSI/ATIS 0300276-2008 (R2017), Operations, Approved: 7/31/2019 Profile Management - ISDN Interface Administration, Maintenance, and Kerrianne Conn, (202) 434-8841, [email protected] Management Services Provisioning Security Requirements for the Approved: 12/15/2015 Public Telecommunications Network: A ANSI/ATIS 0300231.02-2019, DS1 – Layer 1 In- Kerrianne Conn, (202) 434-8841, [email protected] Baseline of Security Requirements for the Service Digital Transmission Performance Management Plane Monitoring ANSI/ATIS 0300245-2019, Directory Services for Approved: 2/14/2017 Approved: 7/31/2019 Telecommunications Management Network Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] (TMN) and Synchronous Optical Network (SONET) ANSI/ATIS 0500019-2010 (R2015), Request for ANSI/ATIS 0300231.03-2019, DS3 - Layer 1 In- Approved: 7/31/2019 Assistance Interface (RFAI) Specification Service Digital Transmission Performance Kerrianne Conn, (202) 434-8841, [email protected] Approved: 3/13/2015 Monitoring Kerrianne Conn, (202) 434-8841, [email protected] Approved: 7/31/2019 ANSI/ATIS 0300247-2018, Operations, Kerrianne Conn, (202) 434-8841, [email protected] Administration, Maintenance, and ANSI/ATIS 0600003-2018, Battery Enclosure Provisioning (OAM&P) – Performance and Rooms/Areas ANSI/ATIS 0300231.04-2019, SONET-- Layer 1 Management Functional Area Services and Approved: 5/7/2018 In-Service Digital Transmission Performance Information Model for Interfaces between Kerrianne Conn, (202) 434-8841, [email protected] Monitoring Operations Systems and Networks Approved: 7/31/2019 Approved: 8/22/2018 ANSI/ATIS 0600004-2017, Equipment Surface Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Temperature Approved: 11/17/2017 ANSI/ATIS 0300232-2012 (R2017), Human-to- ANSI/ATIS 0300251-2017, Codes for Kerrianne Conn, (202) 434-8841, [email protected] Machine Interface Specification for Identification of Service Providers for Telecommunications Management Information Exchange ANSI/ATIS 0600005-2017, Acoustic Approved: 5/11/2017 Approved: 5/11/2017 Measurement Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Approved: 12/21/2017 Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0300234-2000 (S2015), Signalling ANSI/ATIS 0300253-2016, Structure for the System Number 7 (SS7) - MTP Levels 2 and 3 Representation of Location Entities for ANSI ATIS 0600010-2014, Temperature, Compatibility Testing Information Exchange Humidity, & Altitude Standards Approved: 12/11/2015 Approved: 12/2/2016 Approved: 1/21/2014 Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected]

ANSI/ATIS 0300235-2000 (S2015), Signalling ANSI ATIS 0300255-2008 (S2018), In-Service, ANSI/ATIS 0600010.01-2017, Temperature, System 7 (SS7) - SCCP Class 0 Compatibility Non-Intrusive Measurement Device (INMD) Humidity, Altitude, and Salt Fog Testing Methodology for Applying INMD Requirements for Network Approved: 12/11/2015 Measurements to Customer Opinion Models Telecommunications Equipment Utilized in Kerrianne Conn, (202) 434-8841, [email protected] Approved: 7/2/2018 Outside Plant Environments Kerrianne Conn, (202) 434-8841, [email protected] Approved: 1/30/2017 Kerrianne Conn, (202) 434-8841, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 175 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ATIS 0600010.02-2012 (R2017), ANSI/ATIS 0600015.08-2014, Small Networking ANSI/ATIS 0600026-2010 (R2015), Network End Equipment Handling, Transportation Devices Efficiency Standard POTS Splitter Requirements Vibration, and Rail Car Shock Requirements Approved: 10/27/2014 Approved: 2/11/2015 for Network Communications Equipment Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Approved: 3/9/2017 Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0600015.09-2015, Energy Efficiency ANSI/ATIS 0600028-2016, DC Power Wire and for Telecommunication Equipment: Cable for Telecommunications Power ANSI/ATIS 0600010.03-2011 (R2016), Heat Methodology for Measurement and Systems - for XHHW and DLO/Halogenated Dissipation Requirements for Network Reporting of Base Station Metrics RHW-RHH Cable Types Telecommunications Equipment Approved: 7/8/2015 Approved: 5/27/2016 Approved: 7/22/2016 Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0600015.10-2015, Energy Efficiency ANSI ATIS 0600029-2013, Standard for ANSI/ATIS 0600010.04-2017, Operational for Telecommunication Equipment: Irreversible Compression Lugs, Inline Splices, Vibration Requirements for Communications Methodology for Measurement and and Taps Equipment Reporting DC Power Plant - Inverter Approved: 4/8/2013 Approved: 6/15/2017 Requirements Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Approved: 7/9/2015 Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0600030-2016, Line Powering of ANSI/ATIS 0600015-2018, Energy Efficiency for Telecommunications Equipment on Outside Telecommunication Equipment: ANSI/ATIS 0600015.11-2016, Energy Efficiency Plant (OSP) Twisted Copper Pair Loops Methodology for Measurement and for Telecommunications Equipment: Approved: 11/7/2016 Reporting General Requirements Methodology for Measurement and Kerrianne Conn, (202) 434-8841, [email protected] Approved: 5/21/2018 Reporting for Power Systems, DC/DC Kerrianne Conn, (202) 434-8841, [email protected] Converters ANSI ATIS 0600031-2014, (Pumped) Distributed Approved: 3/21/2016 Refrigerant Cooling - Standardized ANSI/ATIS 0600015.01-2014, Energy Efficiency Kerrianne Conn, (202) 434-8841, [email protected] Infrastructure for Telecommunication Equipment: Approved: 1/21/2014 Methodology for Measurement and ANSI/ATIS 0600015.12-2016, Energy Efficiency Kerrianne Conn, (202) 434-8841, [email protected] Reporting -- Server Requirements for Telecommunication Equipment: Approved: 11/17/2014 Methodology for Measurement and ANSI/ATIS 0600035-2018, Recommended Kerrianne Conn, (202) 434-8841, [email protected] Reporting Power Systems - Uninterruptible Maintenance Routines and Frequencies for Power Supply Requirements Central Office Backup Power ANSI/ATIS 0600015.02-2016, Energy Efficiency Approved: 5/27/2016 Approved: 7/27/2018 for Telecommunication Equipment: Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Methodology for Measurement and Reporting - Transport and Optical Access ANSI/ATIS 0600015.13-2017, Energy Efficiency ANSI/ATIS 0600107-2002 (S2015), Digital Requirements for Telecommunication Equipment: Hierarchy - Formats Specifications Approved: 3/21/2016 Methodology for Measurement and Approved: 3/17/2015 Kerrianne Conn, (202) 434-8841, [email protected] Reporting for 802.11xx Wi-Fi Access Points Kerrianne Conn, (202) 434-8841, [email protected] Approved: 1/19/2017 ANSI/ATIS 0600015.03-2016, Energy Efficiency Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0600107.a-2005 (S2015), Digital for Telecommunication Equipment: Hierarchy - Formats Specification (Virtual Methodology for Measurement and ANSI/ATIS 0600016-2018, Remote End POTS Concatenation and LCAS) (Supplement to Reporting for Router and Ethernet Switch Splitter Requirements ATIS-0600107) Products Approved: 1/17/2018 Approved: 3/12/2015 Approved: 8/30/2016 Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] ANSI ATIS 0600017-2014, Non-Halogenated DC ANSI/ATIS 0600307-2018, Fire Resistance ANSI/ATIS 0600015.04-2017, Energy Efficiency Power Wire and Cable for Criteria Ignitability Requirements for for Telecommunication Equipment: Telecommunications Power Systems Equipment Assemblies, Ancillary Non- Methodology for Measurement and Approved: 6/2/2014 Metallic Apparatus, and Fire Spread Reporting DC Power Plant - Rectifier Kerrianne Conn, (202) 434-8841, [email protected] Requirements for Wire and Cable Requirements Approved: 5/7/2018 Approved: 12/14/2017 ANSI ATIS 0600019-2014, Test Requirements Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] for Pb-Free Subassembly Modules Approved: 7/15/2014 ANSI ATIS 0600308-2008 (S2018), Central Office ANSI/ATIS 0600015.07-2018, Energy Efficiency Kerrianne Conn, (202) 434-8841, [email protected] Equipment - Electrostatic Discharge for Telecommunication Equipment: Immunity Requirements Methodology for Measurement and ANSI ATIS 0600020-2014, Test Requirements Approved: 5/31/2018 Reporting – Wireline Access, Asymmetric for Pb-Free Circuit Packs Kerrianne Conn, (202) 434-8841, [email protected] Broadband Equipment Approved: 7/15/2014 Approved: 8/22/2018 Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 176 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ATIS 0600311-2017, DC Power Systems - ANSI/ATIS 0600328-2018, Protection of ANSI/ATIS 0600401-2006 (S2018), Network to Telecommunications Environment Protection Telecommunications Links from Physical Customer Installation Interfaces - Analog Approved: 1/6/2017 Stress and Radiation Effects and Associated Voicegrade Switched Access Lines Using Kerrianne Conn, (202) 434-8841, [email protected] Requirements for DC Power Systems (A Loop-Start and Ground-Start Signaling Baseline Standard) Approved: 12/31/2018 ANSI/ATIS 0600313-2018, Electrical Protection Approved: 1/24/2018 Kerrianne Conn, (202) 434-8841, [email protected] for Telecommunications Central Offices and Kerrianne Conn, (202) 434-8841, [email protected] Similar Type Facilities ANSI/ATIS 0600401.01-2000 (S2015), Network Approved: 12/31/2018 ANSI ATIS 0600329-2014, Network Equipment - to Customer Installation Interfaces - Analog Kerrianne Conn, (202) 434-8841, [email protected] Earthquake Resistance Voicegrade Switched Access Lines Using Approved: 2/25/2014 Loop-Start or Ground Start Signaling With ANSI/ATIS 0600315-2018, Voltage Levels for Kerrianne Conn, (202) 434-8841, [email protected] Line-Side Answer Supervision Feature DC-Powered Equipment Used in the Approved: 3/12/2015 Telecommunications Environment ANSI/ATIS 0600330-2018, Valve-Regulated Kerrianne Conn, (202) 434-8841, [email protected] Approved: 1/24/2018 Lead-Acid Batteries Used in the Kerrianne Conn, (202) 434-8841, [email protected] Telecommunications Environment ANSI/ATIS 0600401.02-2000 (S2015), Network- Approved: 1/24/2018 to-Customer Installation Interfaces - Analog ANSI/ATIS 0600315.01-2015, Voltage Levels for Kerrianne Conn, (202) 434-8841, [email protected] Voicegrade Switched Access Lines with 380V DC-Powered Equipment Used in the Distinctive Ringing Features Telecommunications Environment ANSI/ATIS 0600331-2015, Description of Above- Approved: 3/12/2015 Approved: 2/13/2015 Baseline Physical Threats to Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Telecommunications Links Approved: 9/25/2015 ANSI/ATIS 0600401.03-1998 (S2015), Network- ANSI/ATIS 0600316-2018, Electrical Protection Kerrianne Conn, (202) 434-8841, [email protected] to-Customer Installation Interfaces - Analog of Telecommunications Outside Plant Voicegrade Switched Access Lines with Approved: 12/31/2018 ANSI/ATIS 0600332-2015, Electrical Protection Calling Number Delivery, Calling Name Kerrianne Conn, (202) 434-8841, [email protected] of Network-Powered Broadband Facilities Delivery, or Visual Message-Waiting Indicator Approved: 10/30/2015 Features ANSI/ATIS 0600317-1993 (S2018), Uniform Kerrianne Conn, (202) 434-8841, [email protected] Approved: 3/12/2015 Language for Accessing Power Plants - Kerrianne Conn, (202) 434-8841, [email protected] Human-Machine Language ANSI/ATIS 0600333-2013 (R2018), Grounding Approved: 1/24/2018 and Bonding of Telecommunications ANSI/ATIS 0600401.04-2000 (S2015), Network Kerrianne Conn, (202) 434-8841, [email protected] Equipment and Customer Installation Interfaces - Analog Approved: 7/27/2018 Voicegrade Switched Access Lines with the ANSI/ATIS 0600318-2016, Electrical Protection Kerrianne Conn, (202) 434-8841, [email protected] Call Waiting, Distinctive Call Waiting, or Applied to Telecommunications Network Calling Identity Delivery on Call Waiting Plant at Entrances to Customer Structures or ANSI ATIS 0600334-2013, Electrical Protection Feature Buildings of Communications Towers and Associated Approved: 3/12/2015 Approved: 3/21/2016 Structures Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Approved: 5/28/2013 Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0600401.05-2000 (S2015), Network- ANSI ATIS 0600319-2014, Equipment to-Customer Installation Interfaces - Analog Assemblies - Fire Propagation Risk ANSI/ATIS 0600336-2015, Design Requirements Voicegrade Switched Access Lines with Assessment Criteria for Universal Cabinets and Framework Network-Implemented Coin-Operated Approved: 4/15/2014 Approved: 2/13/2015 Payphone Feature Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Approved: 3/12/2015 Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0600320-2015, Above-Baseline ANSI/ATIS 0600337-2016, Requirements for Electrical Protection for Designated Maximum Voltage, Current, and Power Levels ANSI/ATIS 0600403-1999 (S2015), Network and Telecommunications Central Offices and in Network-Powered Transport Systems Customer Installation Interfaces - DS1 Similar-Type Facilities Against High-Altitude Approved: 3/21/2016 Electrical Interfaces Electromagnetic Pulse (HEMP) Kerrianne Conn, (202) 434-8841, [email protected] Approved: 3/17/2015 Approved: 8/27/2015 Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0600338-2016, Electrical Coordination of Primary and Secondary Surge ANSI/ATIS 0600403.01-1999 (S2015), Network ANSI/ATIS 0600321-2015, Electrical Protection Protection for Use in Telecommunications and Customer Installation Interfaces - (ISDN) for Network Operator-Type Equipment Circuits Primary Rate Layer 1 Electrical Interfaces Positions Approved: 4/12/2016 Specification Approved: 6/2/2015 Kerrianne Conn, (202) 434-8841, [email protected] Approved: 3/12/2015 Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 177 This is a preview of "ANSI Catalog". Click here to purchase the full version from the ANSI store.

ANSI/ATIS 0600403.02-1999 (S2015), Network ANSI/ATIS 0600407-2002 (S2015), Network-to- ANSI/ATIS 0600416.02a-2001 (S2015), and Customer Installation Interfaces - DS1 - Customer Installation Interfaces - Analog Supplement to ATIS-0600416.02.1999(R2005) Robbed-Bit Signaling State Definitions Voicegrade Special Access Lines Using - Network to Customer Installation Interfaces Approved: 3/12/2015 Customer-Installation-Provided Loop-Start - Synchronous Optical NETwork (SONET) Kerrianne Conn, (202) 434-8841, [email protected] Supervision Physical Media Dependent Specification: Approved: 3/9/2015 Single Mode Fiber ANSI/ATIS 0600403.02.a-2001 (S2015), Kerrianne Conn, (202) 434-8841, [email protected] Approved: 3/11/2015 Supplement to ATIS-0600403.02.1999(R2005) Kerrianne Conn, (202) 434-8841, [email protected] - Network and Customer Installation ANSI/ATIS 0600409-2002 (S2015), Network and Interfaces - DS1 Robbed-bit Signaling State Customer Installation Interfaces - Analog ANSI/ATIS 0600416.03-1999 (S2015), Network Definitions Voicegrade Special Access Lines Using E&M to Customer Installation Interfaces - Approved: 3/12/2015 Signaling Synchronous Optical NETwork (SONET) Kerrianne Conn, (202) 434-8841, [email protected] Approved: 3/9/2015 Physical Media Dependent Specification: Kerrianne Conn, (202) 434-8841, [email protected] Electrical ANSI/ATIS 0600403.03-2002 (S2015), Network Approved: 3/11/2015 and Customer Installation Interfaces - DS1 ANSI/ATIS 0600410-2001 (S2015), Network-to- Kerrianne Conn, (202) 434-8841, [email protected] Physical Layer Interface and Mapping Customer Electrical Interface - Digital Data at Specifications for ATM Applications 64 kbit/s and Subrates ANSI/ATIS 0600416.04-2005 (S2015), Network Approved: 3/10/2015 Approved: 3/9/2015 and Customer Installation Interfaces - SONET Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Physical Layer Interface and Mapping Specifications for ATM Applications ANSI/ATIS 0600403.a-2001 (S2015), ANSI/ATIS 0600411-2001 (S2015), Network-to- Approved: 3/11/2015 Supplement to ATIS-0600403.1999(R2007) - Customer Installation Interfaces - Analog Kerrianne Conn, (202) 434-8841, [email protected] Network to Customer Installation Interfaces - Voicegrade Enhanced 911 Switched Access DS1 Electrical Interfaces Using Network-Provided Reverse-Battery ANSI/ATIS 0600417-2003 (S2015), Spectrum Approved: 3/12/2015 Signaling Management for Loop Transmission Systems Kerrianne Conn, (202) 434-8841, [email protected] Approved: 3/9/2015 Approved: 3/9/2015 Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0600403.b-2002 (S2015), Supplement to ATIS-0600403.1999(R2007) - ANSI ATIS 0600413-2009 (R2019), Network to ANSI/ATIS 0600418-2002 (S2015), High bit rate Network and Customer Installation Interfaces Customer Installation Interfaces – Digital Subscriber Line - 2nd Generation - DS1 Electrical Interface Asymmetric Digital Subscriber Line (ADSL) (HDSL2/HDSL4) Issue 2 Approved: 3/11/2015 Metallic Interface Approved: 3/9/2015 Kerrianne Conn, (202) 434-8841, [email protected] Approved: 3/8/2019 Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0600404-2002 (S2015), Network and ANSI/ATIS 0600418.a-2004 (S2015), High bit Customer Installation Interfaces - DS3 and ANSI/ATIS 0600416-1999 (S2015), Network to rate Digital Subscriber Line - 2nd Generation Metallic Interface Specification Customer Installation Interfaces - (HDSL2/HDSL4), Issue 2 Approved: 3/17/2015 Synchronous Optical NETwork (SONET) Approved: 3/9/2015 Kerrianne Conn, (202) 434-8841, [email protected] Physical Layer Specification: Kerrianne Conn, (202) 434-8841, [email protected] Approved: 3/11/2015 ANSI/ATIS 0600404.01-2002 (S2015), Network Kerrianne Conn, (202) 434-8841, [email protected] ANSI/ATIS 0600421-2001 (S2015), In-Line Filter and Customer Installation Interfaces - DS3 for Use with Voiceband Terminal Equipment Physical Layer Interface and Mapping ANSI/ATIS 0600416.01-1999 (S2015), Network Operating on the Same Wire Pair with High Specifications for ATM Applications to Customer Installation Interfaces - Frequency (up to 12 MHz) Devices Approved: 3/10/2015 Synchronous Optical NETwork (SONET) Approved: 3/10/2015 Kerrianne Conn, (202) 434-8841, [email protected] Physical Media Dependent Specification: Kerrianne Conn, (202) 434-8841, [email protected] Multi-Mode Fiber ANSI/ATIS 0600404.a-2005 (S2015), Approved: 3/11/2015 ANSI/ATIS 0600422-2001 (S2015), Single-Pair Supplement to T1.404-2004, Network and Kerrianne Conn, (202) 434-8841, [email protected] High-Speed Digital Subscriber Line (SHDSL) Customer Installation Interfaces - DS3 Transceivers Metallic Interface Specification ANSI/ATIS 0600416.02-1999 (S2015), Network Approved: 3/5/2015 Approved: 3/11/2015 to Customer Installation Interfaces - Kerrianne Conn, (202) 434-8841, [email protected] Kerrianne Conn, (202) 434-8841, [email protected] Synchronous Optical NETwork (SONET) Physical Media Dependent Specification: ANSI/ATIS 0600423-2001 (S2015), Asymmetric ANSI/ATIS 0600405-2002 (S2015), Network and Single-Mode Fiber Digital Subscriber Line (ADSL) Transceivers Customer Installation Interfaces - Direct Approved: 3/11/2015 Based on ITU-T Recommendation G.992.1 Inward Dialing Analog Voicegrade Switched Kerrianne Conn, (202) 434-8841, [email protected] Approved: 3/5/2015 Access Using Loop Reverse-Battery Signaling Kerrianne Conn, (202) 434-8841, [email protected] Approved: 3/9/2015 Kerrianne Conn, (202) 434-8841, [email protected]

Provided by American National Standards Institute www.ansi.org Friday, September 6, 2019 PAGE | 178