English______3 English
Français ______21 Français
Italiano ______39 Italiano
Español ______57 Español
Deutsch______75 Deutsch
Nederlands______93 Nederlands
User Manual Guide
Congratulations on purchasing your new LCD TV which we are sure will provide you with many years of trouble-free enjoyment. This User Manual is provided to help you to start using your new set as quickly as possible and to explain all the functions available to you.
Before setting up and using your new LCD TV, however, we recommend that you carefully read the section ‘Important safety precautions’.
Note: The set is also optionally available with a Monitor mode feature allowing you to use it as a computer monitor. Some of the features and instructions given in this Quick Setup Guide therefore relate to the Monitor mode feature and will not apply to the standard TV set.
3 Using your LCD TV in Monitor mode Selecting Monitor mode ______21 Adjusting picture settings in Monitor mode ______21 Product Specification Basic channel selection Channel selection using the numerical keypad on the remote control ______16 Channel selection using Page+/Page- on the remote control ______16 Operating with the On Screen Display (OSD) Main Menu selection______17 Adjusting TV picture settings ______17 Adjusting sound settings______17 Changing the OSD language______18 Automatic programme search ______18 Using Manual sort to assign TV channels to programmes of your choice______19 Using the Remote Control Shortcut keys Movie Expand ______19 Picture Effect______19 Sound Effect ______19 Sleep Timer______19 Using the Local Menu Teletext Using Teletext ______20
OSD language selection ______13 Country Selection______13 Using Auto Search to select your programmes _____13 Manual Sort______14 Deleting a programme ______14 Moving a programme ______14 Editing a channel ______14 Inserting a channel ______15 Selecting Monitor mode (Monitor option only) _____15 First installation Right side or top side ______10 VESA Wall Mounting ______10 Mains supply connection______10 Aerial connection ______10 Scart (Euro) connection ______10 Y/C video connection (EXT 3, Option only)______11 CVBS connection (EXT 3, Option only) ______11 Left/right audio input connections ______11 PC video input (Monitor option only) ______11 Mini jack PC audio input (Monitor option only) _____12 Headphone connection______12 Connecting up Front view______7 Rear view ______7 Remote control ______8 Local keyboard ______9 Getting acquainted with your LCD TV Power cable ______6 Remote control and batteries ______6 Power adapter ______6 User Manual ______6 RF cable______6 Warranty card ______6 Installing batteries in the remote control ______6 Accessories supplied Regulatory Regulatory information______5 Important safety precautions ______5 Operational Operational safety Contents CONTENTS 4
English switched off for an extended period. extended an for off switched is set TV the when supply mains the from unplugged is supply power the that recommended therefore is It power. of amount small a consumes still it off switched is TV the When note: Important purpose. intended its for only supply power the Use manufacturer. the by recommended one or TV LCD your with delivered supply power the only Use supply Power rear. the in mounting for provided holes the using only mounted is set the that ensure mounted, wall If injury. personal serious cause as well as damage sustain and fall could it where table or tripod stand, trolley, unstable an on it place not Do surface. stable a on placed always is TV LCD your that Ensure Placement TV. LCD your moving when care utmost Exercise Moving cleaners. aerosol or liquid use not do and cloth damp a with Clean supply. mains the from cord power the unplug TV, LCD your cleaning Before Cleaning edges. sharp or pieces glass broken by caused injury avoid to care take happen, should this If knocked. or dropped is product the if break can and glass of made is TV LCD your of screen The Breakage precautions safety Important information Regulatory safety Operational amended by 93/68/EEC by amended as 73/23/EEC and 89/336/EEC Directive of requirements the with complies equipment This ventilation is provided. is ventilation proper unless rack, or bookcase a as such place enclosed an in TV the place not do Likewise, openings. ventilation the block may this since rug or sofa bed, a as such surfaces soft on set the operate not Do TV. your of life the shorten and overheating cause can ventilation insufficient since openings these block or cover not Do ventilation. for openings has TV LCD your of cabinet The Ventilation it. of top on placed are vases as such containers filled liquid no that ensure and it on splash or drip may liquid when area an in it place not Do pool. swimming or sink kitchen washbasin, bathtub, a near example for environment, damp a in TV LCD your use not Do moisture and Water amplifiers. and stoves heaters, radiators, as such sources heat from away TV LCD your Keep heat of Sources PRTOA SAFETY OPERATIONAL 5
English Accessories supplied English On unpacking your LCD TV, ensure that the following RF cable accessories are included. Power cable
Warranty card
Remote control and batteries Installing batteries in the remote control
Before switching on your LCD TV set for the first time, install the two type AA batteries supplied in the remote control. These should be replaced periodically when their power is depleted and the remote control fails to operate.
Open the battery cover on the rear of the remote control and insert the two batteries taking care that the positive and negative ends of the batteries correspond with the positive and negative markings on compartment.
Power adapter
User Manual
Caution: do not mix old and new batteries, and never mix different types of battery (standard, alkaline etc.).
6 ACCESSORIES SUPPLIED Getting acquainted with your LCD TV
Front view English
Rear view
GETTING ACQUAINTED WITH YOUR LCD TV 7 English Remote Control
Numerical keys 0 p 9 Sound effect 0 0 For keying numerical information e.g. channel Provides a choice between pre-selected audio numbers and teletext pages. settings and allows you to switch the audio output mode between stereo and mono. When there is a Standby dual-language transmission, you can also use the 0 Switches the set into standby mode. In this mode sound effect key to select language-1 or language-2. the set still consumes a small amount of power and can be woken up, for example by selecting a channel Mute using the numerical keys. 0 Switches the sound from the loudspeakers off/on. Sleep timer 0 Previous programme Switches the set into standby after a preselected 0 time. Returns the set to the previously selected programme. Picture effect 0 Provides a choice between pre-selected picture Menu select settings. 0 Opens/closes the Main Menu on the On Screen Display.
8 GETTING ACQUAINTED WITH YOUR LCD TV Movie expand Local Keyboard 0 Provides a choice between pre-selected movie
settings. Your LCD TV is equipped with a local keyboard English - In TV-mode: selection between normal / expand / featuring the set’s on/off button plus buttons for channel movie / movie+. and source selection, volume control and for bringing up - In monitor mode: selection between normal / the On-Screen Display (OSD) menu. expand. Depending on model, the local keyboard may be located Volume up/down on the right side of the set (as illustrated in the side 0 Increases/decreases the sound level. panel view) or on the top of the set. When pressed, a slider appears on the screen allowing you to set the sound level between 0 and 100%.
Source select 0 Selects signal source: EXT 1, EXT 2, EXT 3, PC video input (if featured) and previous channel.
Channel select 0 Steps up or down through the channels and external sources.
Teletext on/off 0 Switches the teletext screen on and off.
Mixed teletext 0 Allows you to continue viewing the programme whilst using teletext by switching to a transparent teletext screen. Volume up/down 0 Increases/decreases the sound level. Enlarge 0 Enlarges the teletext image on the screen. Source select
Page hold 0 Selects signal source: EXT 1, EXT 2, EXT 3, PC 0 Stops a teletext page search and remains on the video input (if featured) and previous channel. currently-selected page. On/off Red, green, yellow and blue keys 0 For certain teletext providers, these keys provide a 0 Switches the set on or off. See also ‘safety shortcut to selected teletext pages. precautions’ power supply. Will be used for TOP and FLOF teletext featuring. Menu
0 When pushed for less than 2 seconds: opens the Local Menu which is displayed on the OSD. This menu allows you to make simple adjustments to the set’s picture and sound. (See ‘Using the Local Menu’). 0 When pushed for more than 2 seconds: opens the Main Menu.
Channel up/down ( p + /p - )
0 Steps up or down through the channels.
GETTING ACQUAINTED WITH YOUR LCD TV 9 Connecting up English Right side (optional) Aerial connection
Your LCD TV set is equipped with an input socket for connection to an external (75 ø aerial via a coaxial cable. For best picture quality, we recommend that you use an outdoor aerial.
VESA Wall mounting
If the set is to be mounted on a wall, use only the mounting screw holes provided in the rear and fix securely to the wall using 10 mm M4 screws.
Scart (Euro) connection
0 For users in Europe, a version of the set featuring a Scart connector is supplied for connection to a VCR, DVD player or a video games station. This signal source is selected by selecting EXT 1 on the TV set using the source select button on the local keyboard or the channel select buttons on the remote control.
0 If the Scart connection is used, the set will automatically switch over from the currently selected channel to the EXT 1 source when the Mains supply connection VCR, DVD player or video games station is started.
0 Ensure that the on/off switch on the TV is set to the off position. 0 Connect the power adapter cable to the DC supply socket (15 V) on the rear of the set. Using the power cable supplied with the set, connect the power adapter to the mains supply. Your set is then ready to be switched on.
0 Scart connection (Ext-1 / RGB) gives the best picture quality of all external sources.
10 CONNECTING UP Y/C video connection Left/right audio input connections (EXT 2, Option only) 0 Connect the left and right audio cables from your English 0 The Y/C video connections on the rear and right S-VHS camcorder or VCR to the left/right audio side of your TV set are for connection to an S-VHS input sockets on the back (EXT 2) or side (EXT 3) signal source such an S-VHS camcorder or VCR. of your LCD TV set, taking care that the colour of Select this signal source by selecting EXT 2 for the the plugs and sockets match (left: white, right: red). rear connection or EXT 3 for the side connection using the source select button on the local keyboard or the channel select buttons on the remote control.
CVBS connection PC video input (EXT 3, Option only) (Monitor option only)
0 If you have a VCR or DVD player with a CVBS 0 If you use your LCD TV as a computer monitor, video output, you can connect it to your LCD TV connect the cable from the output of your set through the CVBS video input on the right side computer’s video graphics adapter card to the set’s of the set. Select this signal source by selecting EXT 3. PC video input. When the set and computer are switched on, the set will automatically detect and adapt to the resolution of the graphics adapter. See also ‘Initial installation’.
CONNECTING UP 11 English Mini jack PC audio input (Monitor option only)
0 The speakers on your LCD TV can also provide the audio output for your computer’s sound card. Connect the audio cable from the sound card of your computer to the mini jack PC audio input on the back of the set.
Headphone connection (optional)
0 Connect headphones to the minijack stereo headphone socket on the right side of the set. This will mute the set’s loudspeakers.
12 CONNECTING UP First installation
When you switch on your set for the first time, the folowing screen is displayed. This gives you the Using Auto Search to select your opportunity to: programmes English 0 select your On Screen Display language 4 0 select your country 1 Press to select Auto Search 0 automatically or manually search for available programmes and 2 Press 2 to select ‘Start’ 0 manually sort the detected programmes into the order of your choice The Auto Search procedure then starts. As the procedure progresses, an indicator with the OSD language selection number of channels detected appears on the screen. 1 Press 2 on the remote control to select your desired language from a list of available languages. At the end of the Auto Search procedure, the screen automatically switches to the Manual Sort submenu to 2 Press 1 / 2 to page through the list until you reach the language you want. allow you to arrange the programmes into the order of your choice.
Note: You can always change the OSD language later by selecting ‘Language’ on the Setup Menu (see ‘Changing the OSD language’.) The submenu shows only 10 programmes at a time but you can scroll up and down through the complete list Country selection using the Ÿ and ⁄ keys. As you scroll through the list, the currently highlighted programme is displayed on the TV Choose your country of residence before running the screen. Auto Search procedure. 1 Press 4 on the remote control to select Country If your TV signal provider (e.g. cable or satellite TV company) operates an ATS (Automatic Tuning System), 1 2 2 Press / to page through a list of countries until the names of the programme providers will be displayed you reach your country of residence. and these will be assigned to the TV channels selected by your signal provider.
If a channel does not have a programme assigned to it, "—" will be displayed. If the name of the programme is not known, it will be displayed as "CH[programme number]". You can give the channel a name using the EDIT function on the submenu.
If you are satisfied with the programme order, simply press the OK button on the remote control. The installation routine in then complete and you can start to use your TV set.
If you wish to change the order of programmes or edit the programme list, continue with the Manual Sort procedure.
FIRST INSTALLATION 13 English Manual Sort During this time, the programme you are moving will be The Manual Sort submenu allows you to delete, insert, displayed on the TV screen. move or edit programme items in your programme list. 4 Press the 1 and the Blue keys simultaneously on the remote control to insert the programme in the Deleting a programme new channel position. The programme originally in the channel position and 1 Using the 3 / 4 keys on the remote control, select the programmes below it will automatically move one the programme you wish to delete. position down until the gap in the original channel position is filled. 2 Press the red key on the remote control to delete the programme.
The programme will disappear from the list and all Editing a channel programmes below it will move up one position. The EDIT/INSERT submenu allows you to edit a channel’s properties. Moving a programme
1 Using the 3 / 4 keys on the remote control, select the programme you wish to move.
2 Press the 2 and the Blue keys simultaneously on the remote control.
1 Using the 3 / 4 keys on the remote control, select the channel you wish to edit.
2 Press the Yellow key on the remote control.
The Manual Sort menu is replaced on the screen by the The selected programme moves out of the list to the EDIT/INSERT submenu. right. To edit the channel frequency 3 Using the 3 / 4 keys move the programme to your preferred channel position. 1 Press 1 or 2 to tune to the previous or next programme
As the previous or next programme is tuned in, it appears on the screen. The frequency in MHz of the currently tuned programme appears on the right of the menu.
2 Repeat this procedure until the programme of your choice is selected
14 FIRST INSTALLATION Your LCD TV is a multi-standard set that operates with When you have completed the Manual Sort procedure, W/E European or French (SECAM L/L¢) video systems. press OK on the remote control. The installation
This is usually automatically detected, but the menu item routine in then complete and you can start to use your English System allows you also to manually set it for individual TV set. programmes. Note: To edit the video system You can later run the Auto Tune or Manual Sort procedures at any time by selecting "Install" from the Main Menu. 1 Using the 4 key, select System
2 Using the 1 or 2 keys select either W/E Europe or Selecting Monitor mode France (Monitor option only) On first switching on the set and before performing the The menu item Programme Name allows you to give first installation, you can switch to Monitor mode. the programme a name of your choice 1 Press Source on the remote control or local To edit the programme name keyboard.
1 Using the 4 key, select Programme Name
The current name of the programme is displayed to the right of the menu item
2 Press 2
The menu enters the editing mode and a cursor is displayed over the first character of the programme name
3 Press 1 / 2 to select the character you wish to edit and the 3 / 4 keys to change it
4 When you have edited the programme name, press “PC VGA” will be displayed in the top right corner of the screen. OK to leave the EDIT/INSERT submenu. Subsequently, whenever the set is switched on it will automatically be in Monitor mode. Inserting a channel 2 To switch back to TV mode, press Source on the The EDIT/INSERT submenu also allows you to insert a remote control or local keyboard again. new programme between any two programmes Note: 1 Using the 3 / 4 keys on the remote control, select If there is no video signal from the computer when the set is the position in the programme list where you wish in Monitor mode, the screen will display the words “No sync” for 10 seconds. The set will then automatically to insert a new programme. switch into Standby.
2 Press the Green key on the remote control If you switch back to TV mode, the first installation routine must be performed before the set can be used as a TV. The Manual Sort menu is replaced on the screen by the After the first installation has been completed, you can switch EDIT/INSERT submenu. the set to Monitor mode by pressing Source on the remote control or local keyboard and selecting ‘PC video’ or by using You can then edit the frequency, system and programme the channel up/channel down buttons (see ‘Basic channel name as described in the previous section. selection’).
3 When you have finished editing the programme, Switching off only the TV-set and not the computer (when connected via the VGA cable) can in some cases result in not press OK to leave the EDIT/INSERT submenu. switching off the backlight. Please switch off both TV-set and computer after using the TV-set as monitor. The new programme will then be placed at the selected position in the programme list.
FIRST INSTALLATION 15 Basic channel selection English Your LCD TV set allows you to select up to 100 Channel selection using channels (0 p 99) Page+/Page- on the remote Channel selection using the control numerical keypad on the remote 1 Press the Page+ or Page- keys on the remote control control.
To select a single-digit channel number:
1 Hold down the channel number on the numerical keypad.
The set immediately tunes to the next or previous channel in the channel list.
When the highest channel in the list has been selected, The set immediately tunes to the channel of your choice. the next Page+ keys pressed select EXT 1, EXT 2, EXT 3 and PC video (if featured) in order, after which channel selection returns to the lowest channel in the To select a double-digit channel number: list. 1 1 Briefly ( 1 second) press the first digit of the In the same way, when the lowest channel in the list has channel number on the numerical keypad. been selected, the next Page- keys pressed select PC video (if featured) EXT 3, EXT 2 and EXT 1 in order, 2 Release the first digit and quickly (within 2 seconds) press the second digit of the channel number. after which channel selection returns to the highest channel in the list.
Note: You can also follow the above procedure for channel selection using the Channel up/Channel down keys on the local keyboard.
EXT 1, EXT 2, EXT 3 and PC video (if featured) sources can also be selected directly with the Source key on the remote control and local keyboard.
The set immediately tunes to the channel of your choice.
Note: If the channel you have chosen does not exist, the set will remain tuned to the current channel.
16 BASIC CHANNEL SELECTION Operating with the On Screen Display (OSD)
The OSD on your LCD TV set has been designed to 2 Press B to open the PICTURE Menu. make initial setting-up and adjustment as easy as 3 4 possible. 3 Press and to select the picture item you wish English to adjust Main Menu selection 4 Press 2 and 1 to adjust the picture item to your requirements. 1 Press Menu on the remote control. 5 When you have made your selection press 3 or 4 to leave the picture item or press Menu to remove the OSD from the screen.
Note: These items are adjusted by the slider on the right of the menu item
The items: Brightness, Contrast, Sharpness and Noise Reduction are adjusted by the slider on the right of the menu item.
The item Picture Effect can be set to Normal, Emphasis or Movie
The item Movie Expand can be set to Normal, Expand, Movie or Movie+
The Main Menu appears on the OSD. Moving the noise reduction slider above 30 can cause blurry pictures with fast moving pictures. 2 Press 3 and 4 on the remote control to select the item you wish to adjust. The item ‘Hue’ is adjustable only for NTSC systems (only available via EXT 1, EXT 2 or EXT 3 input). For PAL and Note: SECAM systems it is greyed out and cannot be selected. The Menu key is a toggle button so pressing it again when in the Main Menu removes the OSD from the screen.
Adjusting sound settings Adjusting TV picture settings 1 Select SOUND from the Main Menu. 1 Select PICTURE from the Main Menu.
OPERATING WITH THE ON SCREEN DISPLAY 17 English 2 Press 2 to open the SOUND Menu. 5 When you have made your selection press 3 or 4 to leave the Language Menu or press Menu to 3 4 3 Press and to select the sound item you wish to remove the OSD from the screen. adjust.
4 Press 2 and 1 to adjust the sound item to your Note: requirements. Your language selection will not take effect until you leave the Language Menu. 5 When you have made your selection press 3 or 4 to leave the sound item or press Menu to remove the OSD from the screen. Automatic programme search Note: The items: Bass, Treble, Balance and Dynamic Bass are When your LCD TV was switched on for the first time, adjusted by the slider on the right of the menu item. it was installed by starting the Auto Search routine to detect available programmes and assign them to channel The item Virtual Surround can be switched on or off. numbers on your set. You can repeat this procedure at The item Sound Effect can be set to Pers, Music, Theatre, any time to retune your set, for example, to include new or Voice. television stations that were not available when you first installed your set. The items bass and treble are only available when ‘personal’ is selected in the sound effect menu.
Changing the OSD language
The OSD language was chosen during the initial installation. You can, however, change this language at any time to another language of your choice.
1 Select SETUP from the Main Menu.
1 Select INSTALL from the Main Menu.
2 Press 2 to open the INSTALL Menu.
3 Press 4 to select Auto Search.
4 Press 2 to select ‘Start’.
5 Press 2 to start Auto Search.
All previously-selected programmes are removed and Language is the only selection available to you in the the Auto Search procedure starts. Setup Menu. At the end of the Auto Search procedure, the screen 2 Select Language. automatically switches to the Manual Sort submenu to allow you to arrange the programmes into the order of 3 Press 2 to select your desired language from a list. your choice.
4 Press 1 / 2 to page through the list until you reach the language you require.
18 OPERATING WITH THE ON SCREEN DISPLAY Using the Remote Control Shortcut keys
Using Manual Sort to assign TV The remote control has 4 shortcut keys to the right of the numerical keys allowing you to make quick
channels to programmes of your adjustments to your set. When one of these keys is English choice pressed, a small OSD appears at the bottom centre of the screen. You can sort the programmes into the order of your choice using Manual Sort. Movie Expand Allows you to adjust the height and width of your This automatically opens after you have run the Auto picture to match the programme source. 1 2 Search procedure but you can also open it manually to Using the / keys on the remote control, Movie make changes to your programme list by selecting Expand can be set to: Manual Sort from the INSTALL menu. Normal, Expand, Movie or Movie+ The Manual Sort procedure is described in detail in the in TV mode section ‘First Installation’. Normal or Expand in Monitor mode (only for wide screens) Picture Effect Allows you to make adjustments to the television picture. Using the 1 / 2 keys on the remote control, Picture Effect can be set to Normal, Emphasis or Movie Sound Effect Allows you to adjust the sound equalization to match the programme material. Using the 1 / 2 keys on the remote control, Sound Effect can be set to Pers, Music Theatre or Voice Sleep Timer Allows you to switch the set into standby after a preselected time. By pressing the key repeatedly, you can choose between:
Off/15min/30min/60min/90min
Within a few seconds of selecting the timer setting, the display disappears from the screen and the sleep timer starts counting. If you press the sleep timer key again, the screen will display:
Sleep Timer . [ . ] . . . 10min
showing the time remaining before the set switches into standby.
After several seconds, the display disappears from the screen and the timer continues running.
If you press the Sleep Timer key again while the display is still on the screen, the timer stops and resets itself to the time closest to the time remaining. By pressing the key repeatedly, you can reset the timer or switch it off.
USING THE REMOTE CONTROL SHORTCUT KEYS 19 Using the Local Menu Teletext English Besides the Main Menu opened with the remote control, Teletext is the information service provided by most TV your LCD TV also features a Local Menu that you can stations in addition to their regular programme material. open with the Menu button on the set’s local keyboard Your LCD TV is equipped to receive teletext signals and (on the right side or top of the set). This menu allows to display them graphically on your screen. you to put the set in standby and to make simple adjustments to the set’s picture and sound. Using teletext 1 Press the Menu button for less than 2 seconds on the local keyboard to open the Local Menu. 1 Select a channel on your set
2 Press the Menu button on the local keyboard or 3 2 Press the teletext button on the remote 4 and on the remote control to step through the control. items to the one you wish to adjust. The opening teletext screen for your selected channel appears.
3 Select your desired teletext page by typing in the page number using the numerical keys. These numbers are given in the opening screen.
The items appear individually on the screen and you can step through them in the order:
4 If you wish to stop the page search, press (freeze page) on the remote control.
5 To turn off teletext mode, press the teletext button again.
Note: If you wish to continue viewing the programme whilst using teletext, press (transparent teletext screen) on the remote control.
Some teletext providers support what is known as TOP Teletext. These display colour-coded shortcuts which allow you to use the four coloured buttons on your remote control to select pages without the need to type in page numbers.
3 Press 2 and 1 to adjust the item to your requirements.
4 When you have made your selection press the Menu button on the local keyboard or 3 or 4 on the remote control to leave the item, or press Menu on the remote control to remove the OSD from the screen.
20 USING THE LOCAL MENU Using your LCD TV in Monitor mode
If your LCD TV includes the optional Monitor feature, 5 Press 3 or 4 to store the settings and leave the you can also use it as a computer monitor. The picture item or press MENU to store the settings
resolution provided depends upon the video graphics and remove the OSD from the screen. English adapter used but the maximum resolution that can be attained is:
15” screen p 1024 by 768 pixels 17” screen p 1280 by 768 pixels 20” screen p 640 by 480 pixels
Selecting Monitor mode
1 Press Source repeatedly on the remote control or the local keyboard until PC VGA appears in the top right corner of the screen.
Note: The items BRIGHTNESS and CONTRAST are adjusted by the slider on the right of the menu item.
Auto adjust Automatically centralize the picture on the screen. Can be set to ON or OFF. If the result after automatic adjustment is not satisfying, manual correction is possible with Hor size, Hor position or Ver position.
You are now in Monitor mode. The resolution of your Hor Size video graphics adapter is automatically detected by the Manually adjust the picure width on the screen in set. horizontal direction. After this operation, the picture can be centralised using the horizontal position function as Note: explained below. If there is no video signal from the computer when the set is in Monitor mode, the screen will display the words Phase “No sync” for 10 seconds. The set will then automatically This must be adjusted after the frequency has been set switch into Standby. to optimize picture quality.
There are a number of picture settings you can adjust to Hor position optimize the performance of your set in Monitor mode. Adjusts the horizontal position of the image on the screen. Each video standard will require a different value for this setting. Adjusting picture settings in Ver position Monitor mode Adjusts the vertical position of the image on the screen. Each video standard will require a different value for this 1 Select PICTURE from the Main Menu. setting. 2 Press 2 to open the PICTURE Menu Movie Expand (only for wide screen) Allows you to adjust the height and width of your 3 Press 3 and 4 to select the picture item you wish picture to match the programme source. Can be set to to adjust. Normal or Expand. 4 Press 2 and 1 to adjust the picture item to your Note: requirements. The items Brightness, Contrast, Horizontal Size, Phase, Horizontal Position and Vertical Position are adjusted by a slider on the right of the menu item.
USING YOUR LCD TV IN MONITOR MODE 21 Notes English
22 NOTES