Minimum Uniform Specifications

ATTACHMENT 3 - MINIMUM UNIFORM SPECIFICATIONS

1. ]PATCHES, LOGOS SCREEN PRINTING AND EMBROIDERY

**DISCLAIMER** Lake County Board of County Commissioners is currently utilizing logos listed as FIGURES 1 – 6. All figures are subject to change – should artwork and/or color requirements change significantly, pricing for these items may be renegotiated.

Full Color Lake County Fire Rescue Logo – On Front of any item - Set up for Embroidery and Screen Printing at no additional cost. Lake County Logo is approximately 4½”H x 3¼”W . Additional logos listed may or may not be used and sizes shall vary.

Items may have up to one (1) lines of Embroidery Print of Employee Rank and one (1) line of Screen Printing Print of Rank, (Firefighter, Lieutenant, Captain, Battalion Chief and Chief). Set up at no additional cost. Single line of print may also be embroidered on long sleeve Tee-Shirts. Lines of print may be no longer than the width of the County Logo. Cost for patches shall be included in the unit price for item(s) to which it is affixed.

1. Left Front Embroidery 2. LCFR Logo Patch 3. LCFR Shirt Badge

4. LCFR Jacket Badge 5. Left Front Screen Print 6. Back Screen Print

ATTACHMENT 3 - MINIMUM UNIFORM SPECIFICATIONS

2. TEE-SHIRTS - 1200 Department logo or emblem shall be sized, colored and silk screen imprinted on the left front of the tee shirt in accordance with the Department’s request when ordering. When applicable, silk screen shall be imprinted on the back and/or along the (long) sleeve of tee shirt and in accordance with the Department’s request when ordering. Fabric Weight Short Sleeves: 5.6 oz. Fabric Weight Long Sleeves: 6.1 oz. Silk Screen Color: Navy Blue Style: Short and Long Sleeve; Sizes: Small – 4 XL with Long sizes available in larger sizes Color(s): Gray – Firefighters White - Officers to include Lieutenants and above Yellow - Instructors No pocket; material wash and wear, shrink resistant, color retention fabric 50/50 cotton/polyester jersey or 60/40 cotton/polyester jersey blend. Current accepted/approved brand: Gildan

3. PANTS – 450 Fabric: 65/35 Polyester/Cotton Blend Rip stop Style: Men’s and Women’s Flat Front Sizes: 0 – 18 and 18W – 28W Color: Dark Navy Current Brands: Anchor, Tru-Spec, Southeastern.

4. CLASS A/B – COMMAND SHIRT - 175 Recipient shall be measured for long sleeve length(s), where applicable. Fabric Weight: 7 – 7.5 oz. Style: Long Sleeve, Short Sleeve Sizes: Men’s – Short Sleeve: 14.5 – 22; Men’s – Long Sleeve: 15.5 – 21 Women’s – Short Sleeve: 32 – 48; Women’s – Long Sleeve: 32 – 48

ATTACHMENT 3 - MINIMUM UNIFORM SPECIFICATIONS

Colors: White and Light Blue, Material: 65%Dacron/35% Cotton or 65% Polyester/35% Cotton, Machine wash and dry. Style: Lined placket front; Sewn in military creases; Scalloped flaps; Box pleated straps; 3 ¾" yoke for comfort; Form fit full-length body Patches: Unit price per shirt shall include sewing of two (2) patches per shirt (LCFR Department specific patch will be County provided, vendor will provide Florida State PM or EMT patches) Patch Layout: Left-side LCFR Department and Right-side EMT or PM as designated. Current Brand: Southeastern Code 3.

5. HATS -100 LCFR shall be embroidered on front of cap with full color LCFR Maltese as per picture attachment. All lettering embroidery on hats, ball cap, beanie, or boonie style will be in RED. Ball Cap Style: Wordans Flexfit 6277C, or Pacific Headwear Ladies 222C Boonie Hat Style: Pacific Headwear 1946 Manta Ray Boonie Hat Beanie Hat Style: Carhartt Acrylic Watch Hat 130688-24HR Sizes: Small-Medium, Medium-XL, Adult, One Size fits most. Color: Dark Blue (Navy) Material: 97/3 Polyester/Spandex, Moisture Wicking Current brands: Wordans, Pacific Headwear, Carhartt

6. SHORTS - 200 LCFR logo shall be silk screen imprinted in white on the left leg of shorts. Fabric Weight: 3.7-oz. mesh, 2.1-oz. tricot lining Material: 100% Polyester or 70 denier mesh with solid tricot liner Style: Athletic cut with 9” inseam. Covered elastic waistband and draw cord. 2 side pockets. Sizes: S-3XL Color: Dark Blue (Navy) Current Brand: Champion.

7. JOB SHIRTS - 55

ATTACHMENT 3 - MINIMUM UNIFORM SPECIFICATIONS

Department/Division logo or emblem shall be sized, colored and embroidered on the front left side of job shirts. Fabric Weight: 7.8 - 8 oz. Style: Pull over with collared neck and elbow patches in denim. 7 – 9” zippered front. Ribbed waist and wrist cuffs. Employee’s rank embroidered on the right in yellow. LCFR Department Logo embroidered in full color on left. Sizes: Small to 4 XL Color: Dark Navy with denim collar and elbow patches. Material: Wash and wear fabric blend of 95/5 cotton/polyester fleece. Current Brand: Game 810 Job Shirt

8. RAINCOATS- 100 Shall be screen-printed with LCFR on back in reflective lettering – 3” letters. Style: #587 MLF Reversible Rain Jacket Short and #586 MLF Reversible Rain Jacket Long Sizes: Xsmall Regular to 3X Long Colors: Fluorescent Yellow/Reversible Black Material: 100% Polyester Oxford ANSI 3 compliant with 2” silver reflective tape, Reversible/removable hood with visor, Waterproof zipper side vents, Waterproof zipper pockets on yellow side, Snap front with hidden reversible zipper; lengths 30” to 49”. Current Brand: Liberty

9. JACKETS - 50 Style: HS3352+7352 Horace Small/The Force Jacket, New Generation 3 Waterproof Jacket w/ Zip-in Jacket Hood Fabric: Not specified Color: Dark Navy Sizes: XS – Regular to 6XL – Long Material: 100% Nylon Current Brand: Horace Small/New Generation 3

ATTACHMENT 3 - MINIMUM UNIFORM SPECIFICATIONS

10. LEATHER TROUSER BELTS - 75 Style: Dutyman 1621 Basketweave with Buckle 5.11 Operator Belt 1.75" Blackhawk CQB/Emergency Rescue Rigger Sizes: 26” to 52” Color: Black Material: Leather 1 ¾” width unless otherwise specified Buckle: Nickel or Brass Current Brand: Dutyman, 5.11, Blackhawk

11. BADGES – JACKET AND SHIRT- 50 No substitutions Style(s): Blackinton B575 - Shirt and Blackinton B1009 - Jacket Size: Shirt Badge 2 1/8H “x 1 ¾W “; Jacket badge 3 1/8” H x 2 3/8” W Plate Finish: Silver/Rhodium or Gold Engraved: LAKE COUNTY FIRE RESCUE Lettering: Block, Black with Dot Separator Center: State of Florida Seal, Large – See Figures 3 and 4 Safety Pin Catch

12. COLLAR BRASS AND UNIFORM INSIGNIA - 50 Collar Brass and Uniform Insignia include all items to be worn with Class A, Class B uniforms. This shall include Name Plates, Serving Since plates, available in silver/rhodium and gold options. Collar brass from Lieutenant to Chief shall be in gold. All collar brass will be priced in pairs only. Engraved: Twenty (20) letters/spaces per line Finish: Smooth, shiny Color: Gold tone or Silver/Rhodium tone Backing: Clutch back Brand/Style: Galls: Nameplate NT095 Serving Since NT026

ATTACHMENT 3 - MINIMUM UNIFORM SPECIFICATIONS

Single Bugle - CB056 Double Bugle - CB057 2 Crossed Bugle -CB058 3 Crossed Bugle - CB059 4 Crossed Bugle - CB060 5 Crossed Bugle - CB061

13. RIBBONS AND SLIDE CAB HOLDERS Style: Commendation Bars.com or similar. Color: Gold A11173 – Army Commendation A11173-A – Air Force Commendation A11173-B – Navy Commendation A11173-C – Marine Commendation A11173-D – Coast Guard Commendation A7140 – Solid Blue – Firefighter/Officer of the Year A7140-C – Red w/ 1 star – Level 1 Instructor, Inspector, Investigator A7140–D – Red w/ 2 stars – Fire Officer 1 A7140-E – Red w/ 3 stars – Associates Degree A7140-F – Red w/ 4 stars – Bachelor’s Degree A7140-G – Red w/ 5 stars – Master’s Degree A10296 – White with Purple Heart Center - Purple Heart A11178 – Red Left with “LIFE”, Blue Right with “SAVING” A11753 – Blue with Red Stripes, Gold Finish and “P.E.R.T.” in center section A10398 – Black with gold enamel stripes, “HONOR GUARD” in center section A7922 – Green/White/Green w 1 star in center section-Unit Citation 1st Award A7142-A – Green/White/Green with 1 star in each Green section-Unit Citation Bar 2nd Award A7142-B – Green/White/Green w 3 stars, 1 in each section- nit Citation Bar 3rd Award A7142-F – Green/White/Green with 1 star in each Green section and a 4 in the center White section-Unit Citation Bar 4th Award

ATTACHMENT 3 - MINIMUM UNIFORM SPECIFICATIONS

(Item # not available) – Special Operations Response Team Bar (Item # not available) – Field Training Officer Bar SB-2-B – Double Cab Slide Ribbon Holder SB-3-B – Triple Cab Slide Ribbon Holder SB-4-B – Quadruple Cab Slide Ribbon Holder SB-5-B – Quintuple Cab Slide Ribbon Holder SB-6-B – Sextuple Cab Slide Ribbon Holder SB-7-B – Septuplet Cab Slide Ribbon Holder SB-8-B – Octuplet Cab Slide Ribbon Holder Ribbon Size: 1.375” x 0.375” H Colors: As designated.

14. ACCESSORIES Uniform Service Hash Marks – Each has mark depicts 4 years of service and may be sewn on a Class A, L/S Command Shirt or a Dress Coat. Style: Embroidered fabric; 1 Hash Mark through 9 Hash Marks Color: Medium Gold on Navy Felt Backing Size: 2 inches wide x 3/8 inches per stripe

Gear Bag Style: Step – In Boot Bag 7” Maltese cross is embroidered on the front, zippered front pocket Color: Red Fabric: PVC/nylon with heavy-duty two-way zippers and nylon web carrying straps Size: 19”H x 16”W x 17”D

Gear Bag Style: Large enough for 2 sets of turnout gear w/extra compartments for helmet, jumpsuit, SCBA mask and gloves. Embroidered logo and reflective striping. Reinforced bottom and sides. Color: Red Fabric: Heavy duty water resistant nylon Size: 16" x 18" x 34"

ATTACHMENT 3 - MINIMUM UNIFORM SPECIFICATIONS

Wild Land Gear Bag Style: Nylon Carry Straps and Maltese Cross Color: Red Fabric: 10oz. Water repellent Cotton/duck Size: 19" x 8.5" x 10"

15. DRESS UNIFORMS Dress Coat: Style: Double Breasted Blouse Coat with 6 buttons in rhodium/silver or gold. Lined with two inside breast pockets. Fabric: 100% Worsted Wool or Polyester Color: Navy Blue Sizes: Men’s 34 – 60; Regular and Long, Women’s 0-24; Regular and Long

Dress Pants: Style: Flat front with two hip pockets and two rear pockets with button flaps. Fabric: 100% Worsted Wool or Polyester Color: Navy Blue Size: Men’s 28 – 58; Short, Regular and Long, Women’s

Dress Hat: Style: FDNY Bell Cap with black vinyl brim Fabric: Not specified Color: Navy Blue with silver chin strap and White with gold chin strap Sizes: 6 ½ X-Small to 8 X-Large

Dress Uniform Tie: Style: Neck Tie – Traditional, Clip –on and Ladies Crossover Sizes: Traditional; 57” – 61”, Clip-on 18” – 20”, 3 inches wide Fabric: Polyester or Polyester/Wool Blend Color: Navy Blue

ATTACHMENT 3 - MINIMUM UNIFORM SPECIFICATIONS

Sleeve Bands: Sleeve Bands shall be gold in color, ½ “H. Sewn around both sleeves on the dress coat they shall be applied as follows: Lieutenant – 1 full row Captain – 2 rows, 1 full row and ½ row Battalion Chief – 2 full rows Assistant Chief – 3 full rows Deputy Chief – 4 full rows Chief – 5 full rows

Dress Belt: Boston Leather 6582 Belt in High Gloss with Silver or Gold Buckle Sizes: 28” – 58” Material: Black High Gloss Leather 1.5”H Buckle: Nickel or Brass

16. SHOES AND BOOTS Dress Shoes: Bates Men’s High Gloss Oxfords #E00941 Sizes: 3 – 15’ Width B – EEE Color: Black Bates Women’s High Gloss Durashock Oxfords #E00742 Sizes: 4 – 12; Width N – EW Color: Black Duty Boots: Style: ASTM-Approved composite safety toe, Side zip optional Material: Leather or Composite Closure: 6”, 8”, Lace-up or pull on Color: Black Sizes: Men’s 6 – 15; Women’s 4 – 12 Current brands are Bates and Thorogood.

ATTACHMENT 3 - MINIMUM UNIFORM SPECIFICATIONS

17. FIREFIGHTING GLOVES AND HOODS Gloves: Must meet National Fire Protection Association (NFPA) standard 1971-2013, Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting. Sizes: XXS to Jumbo Current Brand: Shelby 5226

Wildland/Proximity Gloves: Must meet National Fire Protection Association (NFPA) standard 1971-2013, Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting. Sizes: XS to Jumbo Current Brand: Shelby 5002

Hoods: Must meet National Fire Protection Association (NFPA) standard 1971-2013, Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting. Size: Universal/One Size Color: To be determined