MOQ CA101-D Mini-ITX Required

Mobile GM45/ Features

ICH9M LAN2 LAN1 COM 2 ® GM45/ICH9M Mic-in VGA ® Line-in CPU ™2 Duo Intel® ® Line-out DC-in 12V MEMORY 2 DDR3 SODIMM up to 8GB USB 2-3 USB 0-1 HDMI KB/MS DVI-I EXPANSION 1 PCIe x1, 1 PCI (DVI-D signal) DISPLAY OUTPUTS 1 HDMI, 1 DVI-I (DVI-D signal), 1 VGA, 1 LVDS LAN 2 Gigabit LAN ports COM1 COM 2 COM DIO USB 8 USB 2.0 DDR3_2 Intel ICH9M SODIMM STORAGE 4 SATA 2.0 PCI DDR3_1 1 IDE SODIMM USB 6-7 DIO 8-bit DIO SATA 0 Intel GM45 SATA 1 USB 4-5 LVDS LCD panel SATA 3

SATA 2 LCD/Inverter power IDE Socket P PCIe x1 478-pin

Peripheral power

Mechanical Drawing Block Diagram

Core2 Duo/ 157.48 163.83 153.39 126.92 138.50 121.59 0.00 59.45 89.84 1.57 36.90 6.17 17.74 Thermal Sensor Celeron 575

FSB 667/800/1066MHz

10.16 AD D R CTRL D ATA ADDR/DATA 0.00 LVDS LVDS SRAS/ VGA Out CAS/WE DDR3 DIMM 1 VGA CRT DDR3 DIMM 2 22.86 CLOCK SDVO GM45 DVI Graphics-Core HDMI ISL6263CRZ LAN CONN. IDE H-L i n k

PCIe x1 JMicron Interface PCIe x1 JMB368 Port 1 Realtek GLAN 1 USB2.0 PCI RTL8111C USB 8x Interface SATA2.0 ICH9M PCI SATA 4x PCIe x1 Port 3 SPI Bus Realtek GLAN 2 Boot ROM RTL8111C Azalia CONN. LPC BusLPC LAN CONN. HD_Audio HD_Audio Link PCIe Bus PCIe x1 154.94 154.94 ALC262

163.83 159.84 159.84 157.48

6.17 0.00 TPM (Opt.) Winbond Digital I/O SLB9635 TT 1.2 W83627DHG-P Super I/O COM 2 COM 1 CA101-D Mini-ITX

Speciications

PROCESSOR REAR PANEL I/O PORTS • Socket P 478-pin Micro FCPGA for: • 1 DC-in 12V jack - Intel® CoreTM2 Duo processor • 1 mini-DIN-6 PS/2 port for PS/2 keyboard/mouse - Intel® Celeron® 575 processor • 1 DB-9 RS232/485 serial port • 1066/800/667MHz FSB • 1 HDMI port ® • Intel 45nm transistor technology • 1 DB-15 VGA port ® ® • Intel Trusted Execution Technology (Intel TXT) • 1 DVI-I port ® ® • Intel Virtualization Technology (Intel VT) DMA • 2 RJ45 LAN ports • Supports Data Bus Inversion (DBI) • 4 USB 2.0/1.1 ports • Supports Message Signaled Interrupt (MSI) ® ® • Mic-in, line-in and line out jacks • Supports Intel architecture with Intel Wide Dynamic Execution Note: Dual display is not supported when using HDMI and DVI-I at the same time. For dual display, use an analog CRT monitor CHIPSET with either HDMI or DVI-I. • Intel® chipset - Intel® GM45 Express chipset ® I/O CONNECTORS - Intel ICH9M I/O Controller Hub • 2 connectors for 4 external USB 2.0/1.1 ports • 1 connector for an external RS232 serial port SYSTEM MEMORY • 1 LVDS LCD panel connector • Two 204-pin SODIMM sockets • 1 LCD/inverter power connector • Supports DDR3 800/1066MHz • 1 8-bit Digital I/O connector • Supports up to 8GB system memory • 1 front audio connector for line-out and mic-in jacks • 64-bit wide per channel • 256Mb, 512Mb, 1Gb and 2Gb memory technologies • 1 CD-in connector • Supports non-ECC x8 and x16 DIMMs • 1 S/PDIF connector • Supports On-Die Termination (ODT) • 4 Serial ATA connectors • Supports partial writes to memory using data mask signals (DM) • 1 44-pin IDE connector • 1 4-pin peripheral power connector or DC-in jack EXPANSION SLOTS • 1 front panel connector • 1 PCI Express x1 slot • 2 fan connectors • 1 PCI slot ENERGY EFFICIENT DESIGN ONBOARD GRAPHICS FEATURES • ACPI v2.0 speciication • Intel® GMA 4500 integrated graphics engine • System Power Management - Supports 3D, 2D and video capabilities, DX10 and OpenGL 2.1 • Wake-On-Events include: - Wake-On-PS/2 Keyboard/Mouse ONBOARD AUDIO FEATURES - Wake-On-USB Keyboard/Mouse • Realtek ALC262 2-channel High Deinition Audio - Wake-On-LAN • Three stereo ADCs support 16/20-bit PCM format for - Wake-On-Ring multiple input streaming • CPU stopped clock control • High quality analog differential CD input • AC power failure recovery • 16/20/24-bit S/PDIF-OUT supports 44.1K/48K/96K/192kHz sample rate • 16/20/24-bit S/PDIF-IN supports 44.1K/48K/96K/192kHz sample rate DAMAGE FREE INTELLIGENCE • Monitors CPU/system temperature and overheat alarm ONBOARD LAN FEATURES • Monitors Vcore/12V/1.5V/5V/5VSB voltages and failure alarm • Two Realtek RTL8111C-GR PCI Express Gigabit Ethernet controllers • Monitors CPU/chassis fan speed and failure alarm • Integrated 10/100/1000 transceiver • Read back capability that displays temperature, voltage and fan speed • Supports Full Duplex low control (IEEE 802.3x) • Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab POWER CONSUMPTION • Supports power down / link down power saving • 47.88 W with Intel® CoreTM2 Duo at 2.53GHz and 1x 1GB DDR3 SODIMM SERIAL ATA (SATA) INTERFACE • 4 Serial ATA ports compliant with SATA 1.0 speciication TEMPERATURE • SATA speed up to 3Gb/s (SATA 2.0) • 0oC to 60oC • Integrated Advanced Host Controller Interface (AHCI) controller HUMIDITY IDE INTERFACE • 10% to 90% • JMicron JMB368 PCI Express to PATA host controller • Supports Native Mode operation DIMENSIONS • Supports PIO Modes 0, 1, 2, 3, 4 • mini-ITX form factor • Supports Multiword DMA Modes 0, 1, 2 • 170mm (6.7") x 170mm (6.7") • Supports Ultra DMA 33/66/100/133 • Supports ATA/ATAPI command CERTIFICATION BIOS • CE • AMI BIOS • FCC Class B - 16Mbit SPI BIOS • RoHS Packing List Optional Items

• 1 CA101-D • USB port cable • 1 IDE cable • COM port cable • 2 USB cables • Serial ATA data cable • 1 Serial ATA data cable • Serial ATA power cable • 1 Power cable • I/O shield • 1 PS/2 KB/Mouse cable • IDE cable • 1 Bracket mounted with a COM port • Power adapter (75W, 12V) : 671-107501-000G • 1 I/O shield • 1 CD • 1 QR (Quick Reference)

DFI reserves the right to change the speciications at any time prior to the product's release. Changes thereafter will be based on the product's revision. Please contact your sales representative for the exact revision offered in your area. Refer to the website (www.di.com) for the most updated information. www.di.com All product names mentioned are trademarks of their respective companies. © November 20, 2013 DFI Inc.