What you will need

power supply may be either supply shown here

Quick Start Guide

Digi TS W Family PortServer TS 4 W Software & shown Documentation

Ethernet cable not included Digi One TSS W, PortServer TS 2 W, PortServer TS 4 W PN:(1P) 90000305 B

Connect serial device

INSTALL

Connect Connect power Ethernet supply cable

RUN Software & WIZARD Documentation

Insert CD

If you have a system and it Follow wizard does not use an auto-mounter, you will need to manually the CD. See the back of this guide for UNIX specific instructions.

Congratulations! The Wireless device is REBOOT configured. Go to the User Guide on the CD for more information.

Disconnect Disconnect Re-connect power Ethernet power supply supply cable

© Digi International Inc., 2004. Digi, Digi International, the Digi logo, the Digi Connectware logo, the Making Device Networking Easy logo, Digi One TS, PortServer TS W, visit us at www.digi.com and RealPort are trademarks or registered trademarks of Digi International, Inc. in the United States and other countries worldwide. All other trademarks are the property of their respective owners. Accessing the CD from a UNIX System

Insert CD in system CD drive 1 If your system auto mounts the CD, skip to step 5. Auto Mount programs may use the information Software & Documentation to define a mount point. If the CD volume is UNIX "Digi" then the mount point may be /cdrom/digi

2 Determine your CD device Common names for CD-ROM devices: 3 NAME EXAMPLE Identify the mount-. /dev/cdrom /dev/cdrom Some common pre-existing mount points: /dev/cdrom/cdromn /dev/cdrom/cdrom1 /mnt/cdrom /cdrom /dev/cdn /dev/cd0 Or create your own: mkdir /mnt/mycdrom /dev/dsk/cktmdn /dev/c1t2d0 HPUX - Check to see if pfs is running To list descriptions of devices: ps -ef | grep pfs AIX: lscfg If not, start the daemons: HPUX: - Make sure you have administrator privileges and pfs_mountd&; pfsd& your PATH includes /usr/sbin ioscan -funC disk Solaris: Most Solaris systems use an auto-mounter. See the man page on vold: man vold

4 Mount the CD by entering one of the commands from the following table: Operating Command 5 System Navigate to mounted CD directory, enter: ./setup AIX mount -r -v cdrfs device mount-directory do not use mount, it will not operate correctly *HPUX pfs_mount device mount-directory If you see DISPLAY permission errors when running the CD, See man pages for pfs and pfs_mount for more you may want to verify your DISPLAY variable is set. information. To set the DISPLAY variable: mount device mount-directory Linux DISPLAY=localhost:0.0; export DISPLAY SCO mount -r -F device mount-directory AND/OR UnixWare SCO mount -r -f ISO9660 device mount-directory xhost +localhost OpenServer Solaris mount -F hsfs device mount-directory (Intel Most systems use an auto-mounter. See the man page & SPARC) on vold: man vold

device is the path to the assigned to the cdrom drive, mount-directory is the directory where the Digi CD is mounted *HPUX When finished, leave the CD directory and pfs_umount cd pfs_umount mount-directory (If you inadvertenly use umount instead of pfs_umount, kill the pfs daemons to remove the CD-ROM.)