Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
Chief Patron
Sri Ganta Ramachandra Rao , Chairman, RCE Sri K.Venu Gopal, Secretary, RCE Smt.K .Rama Venu Gopal ,Correspondent, RCE
Patron
Dr. B.T.P. Madhav, Professor and Associate Dean, Academic Research, K.L. University, A.P. India. Dr.Dola Sanjay S, Principal, RCE Dr. D. Sucharitha, Director-AERF
Advisory Committee Dr.S. Varadarajan, Professor, S V University Dr. T. Kishore Kumar, Professor NIT Warangal Dr.S.Chandramohan Reddy, Assoc. Professor, JNTU Ananthapur
Chief Guest .Ravindra Vinjamuri Life Board Edu Solutions Pvt. Ltd. Bangalore,Karnataka.
Organizing Committee
Dr. S. Jagan Mohan Rao, Professor, ECE RCE. Mr. D. VenkannaBabu, Associate Professor, ECE RCE. Mr. J. Prasanth Kumar, Associate Professor, ECE RCE. Mrs. Y. Lavanya, Associate Professor, ECE RCE. Mr. Ch. Naga Srinivas, Assistant Professor, ECE RCE. Mr. NVDP Murthy, Assistant Professor, ECE RCE. Mr. P. Bala Krishna, Assistant Professor, ECE RCE. Ms. V.Sushma, Assistant Professor, ECE RCE. Mrs. P. Bhagya Sri, Assistant Professor, ECE RCE. Mrs. B. Anitha Pravalli, Assistant Professor, ECE RCE. Mrs. A N L Harisha, Assistant Professor, ECE RCE.
www.anveshanaindia.com [email protected]
1 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
Conveners
Dr. L.Bharathi ,HOD,ECE,RCE Mr.Ramakrishna Manda, Assoc . Professor, ECE,RCE
Co Convener
Mr.R Durga Prasad, Assoc Professor, ECE Mr.D.Sridhar ,Assoc . Professor, ECE
Peer Review Committee
Dr.B.S. Sathish, Professor, RCE, ECE Dr. N.Sangeetha Priya, Professor, ECE, RCE. Dr. Veda Prakash, Assistant Professor, KCEA Armoor Dr. Chiranjeevi, Assoc. Professor, St. Mary’s Engineering College, DeshmukhiVillage, Hyderabad
Session Chair
Dr. D. Dayakar Rao, Professor, Dept. of ECE, Amrita Sai Institute of Science and Technology, Paritala, Kanchikacherla, Vijayawada Dr. K. Kusal Kumar, Assoc. Professor, Vignan Institute of Engineering for Women, Dept. of EEE, Visakhapatnam
www.anveshanaindia.com [email protected]
2 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
MESSAGE
I am extremely happy and feeling honour to associate with “NATIONAL CONFERENCE ON RECENT CHANGES IN ENGINEERING SCIENCE AND TECHNOLOGY (NCRCEST2020)”. The Conference aims to bring different ideologies under one roof and provide opportunities to exchange ideas face to face, to establish research relations and to find national partners for future collaboration. The themes and sub-themes for this conference are indicative of relevant research areas to give the prospective authors innovative prepositions about the ambit of discussion.
I would like to congratulate RAMACHANDRA COLLEGE OF ENGINEERING AND ANVESHANA EDUCATIONAL AND RESEARCH FOUNDATION to conduct such event in systematic way and to disseminate the knowledge to all the corners of the country. Researchers need to carry the ideas presented in this conference to next level and continue their research with good collaborations. I wish the management, faculty, staff and students of Ramachandra College of Engineering to conduct such good quality conferences in the future also with standard and quality publications.
All the Best
Dr. B T P Madhav
Professor & Associate Dean (Research) Koneru Lakshmaiah Education Foundation, K L Deemed to be University, AP, India
www.anveshanaindia.com [email protected]
3 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
MESSAGE
On behalf of the Organizing Committee, I have immense pleasure to note that the Ramachandra College of Engineering is organizing the NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND Technology, on 29th Feb 2020.
ENGINEERING” discipline is one of the fundamental aspects of new inventions and innovations the field of Electronic, mechanical, civil and many other fields. Thus, an conference Meeting Organized by Ramachandra College of Engineering will help develop many aspects of in the field of engineering and many research oriented innovations to the society.I strongly feel that the continued initiatives of Ramachandra College of Engineering for the betterment of mankind by organizing such scientific conferences will be extremely helpful for future research and technical practices in general and in engineering in particular.
I am sure that the delegates, experts, students, researchers, Pharma industries, policy makers and healthcare givers will all tremendously benefit from the deliberation of this congress in a warm and friendly environment.Your presence and deliberation will make this congress remarkably successful in all aspects of Engineering.
Sri Ganta Ramachandra Rao , Chairman, RCE
www.anveshanaindia.com [email protected]
4 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
MESSAGE
It is a pleasure to welcome you to NCRCEST2020, the national level conference ENGINEERING, SCIENCE AND TECHNOLOGY at Ramachandra College of Engineering. The conference is organized as a set of tracks in the field of engineering and technology. The successful organization of RCE has required talents, dedication and time of many volunteers and strong support. Special gratitude and appreciation is due the various track chairs as they are primarily responsible for the content of the technical program. I would also like to thank organizig committee and review committee for arranging the successful conference. We hope that you will find the conference both enjoyable and valuable, and also enjoy the architectural, cultural and natural beauty of greenery in and around the college.
Dr.Dola Sanjay S, M.Tech., Ph.D Principal, RCE
www.anveshanaindia.com [email protected]
5 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
MESSAGE
NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY addresses the issues through the seminar on a vibrant platform for academicians, researchers and industry practitioners from the related areas to share their original research work , practical experience and exhibitions, bringing together representatives of all those involved at every fields of business, industry, academic, government and civil.
The International Conference facilitates ideas, statistics, and interpretation and program possibly to solve. The conference focuses on RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY”. The conference will address recent issues and will look for significant contributions to advanced engineering studies in theoretical and practical aspects. It provides a multi-disciplinary forum for the exchange of knowledge and expertise in the recent developments in the fields of Engineering Science and Technology. I am self- assured that your deliberations and the outcome of your efforts will raise public awareness about the role and value technology as a tool to promote economic, social and cultural development while addressing the complex issues on your agenda.
It is my privilege to wish all the delegates a successful techno career and take the special honour to welcome you all to this Conference NCRCEST-2020. We look forward for key note addresses, invited lectures, paper presentations and audience participation during the conference.
With best wishes. Ravindra Vinjamuri Life Board Edu Solutions Pvt. Ltd. Bangalore
www.anveshanaindia.com [email protected]
6 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
MESSAGE
AERF aims to educate researchers for the future to build and maintain quality oriented research related to Engineering and other domains as well. We believe these researchers„ contribute to make a difference to their Colleges and Universities and to the world around them. In our endeavours, we draw upon reserves of goodwill among the quality oriented research, its reputation among researchers„ and a potential student, commitment is the key strength to AERF.
The future holds tremendous promise for our organization we look forward to being recognized as one of the premier research organization which meets the quality standards across the globe. To achieve this goal, the organization is following a three-pronged approach: connect, nurture, and grow. We will:
CONNECT proactively with the worlds of practice and policy, with academic work nationally and globally, with our research work, and with the local community. NURTURE a high performance work environment by emphasizing and supporting a climate of autonomy, stretch, and team work.
GROW our capacity, but do so in a thoughtful and strategic manner, aiming to have an impact commensurate with our ambitions, and ensuring that we maintain and upgrade the quality of our people and our experience.
Dr. D. Sucharitha Director – AERF
www.anveshanaindia.com [email protected]
7 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
MESSAGE
I hope this message finds you and your family in the best of health and spirits. It was nice to hear you have presented in National Conference. It was really a delight to hear that it has been fairing well in the field of Engineering Applications and Basic Sciences
NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY NCRCEST2020 addresses these issues through the seminar and exhibitions, bringing together representatives of all those involved at every fields of business, industry, academic, government and civil.
I must congratulate you on the attending and presenting research paper. The conference focuses on “NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY”. This conference is going to address many issues. I wish all the delegates a successful techno career and take the privilege to welcome you all to this International Conference NCRCEST-2020. In this moment of celebration I congratulate one and all who involved in conference.
All the Best.
Dr.L.Bharathi
Convenor & HoD , ECE
www.anveshanaindia.com [email protected]
8 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
MESSAGE
“NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY NCRCEST2020” addresses these issues through the seminar and presentations, bringing together representatives of all those involved at every fields of business, industry, academic, government and civil strata.
The national conference facilitates ideas, information and programs on a platform that encourages creative thinking and innovation in the fields mentioned in the theme of the program. The conference focuses on “NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY” which is very relevant to the present day scenario. I congratulate the organizers, coordinators sponsoring members, participants of the National Conference on “NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY” I am confident that the deliberations and the outcome of your efforts will raise public awareness about the role and value of the theme of the conference as a tool to promote economic, social and cultural development while addressing the complex issues on the agenda. I wish all the members involved a successful program ahead
With best wishes………..
M.Ramakrishna
Convener,Assoc Prof, ECE
www.anveshanaindia.com [email protected]
9 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
MESSAGE
“Heights by great men reached and kept were not attained by a sudden flight, but they while their companions slept were toiling upward in the night”.
The meaning of the above stanza is self-evident, nothing comes from nothing, and nothing ever could. Success and achievements are commensurate with will power, hard work, grit, resourcefulness and single-minded approach.
Ramachandra College of Engineering (RCE) understand the social relevance of research and its contribution in developing a body of knowledge and therefore gives immense importance to the research output. In order to encourage the researchers in various fields relating to Engineering Ramachandra College of Engineering (RCE) is organising the national level conference in association with Anveshana Educational and Research Foundation with different contemporary themes on a regular basis. The focus here is on blend of academics & cutting edge research and innovation through inter-disciplinary activities.
A saying goes like this “Ordinary things done in an extraordinary way make people great”.
I hope that the deliberations in the Conference will help researchers from academia and industry and the Conference will provide a platform for initiating collaborative research projects.
I wish the Conference a fabulous success.
R.Durga Prasad
Co Convener,Assoc Prof, ECE
www.anveshanaindia.com [email protected]
10 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
INDEX
Paper ID Titles & Author Details Page No.
MICROCONTROLLER BASED SELF BOOKING CYLINDER 1001 18 Prof.S. Jagan Mohan Rao1, K. Yasaswini2, M.Pooja3, N.M.V.SaiKumar4, M.Hemanth 5
DESIGN & PARAMETRIC ANALYSIS OF BAND REJECT 1002 ULTRA WIDEBAND (UWB) ANTENNA USING STEP 19 IMPEDANCE RESONATOR 1J Prashanth Kumar, 2N Lavanya, 3M Tireesha, 4K. Sandeep INTEGRITY AUDITING AND DATA SHARING WITH SENSITIVE INFORMATION HIDING IDENTITY-BASED 1003 FOR SECURING CLOUD STORAGE 20 1Dr.L.Bharathi.2K.Kusuma Priya, 3K.Manikanta, 4N.Naga Pavani, 5K.Somanath,
VEHICLE IMMOBILISER FOR THEFT AND 1004 ALCOHOL DETECTION 21 R.Vijaya Lakshmi 1, K.Sai Divya2, K.Iswarya3, K.Deepika4
A SECURE INTEGRITY CHECKING SYSTEM FOR SRAM 1005 P.Bala Krishna1, Komal Kumari2, K.Sowmya3, M.Jahnavi4, 22 K.Raghu Babu5. EMERGENCY ALERT FOR WOMEN'S SAFETY WITH LOCATION TRACKING 1006 1 2 3 23 D. Venknna Babu ,,M.DurgaBhavani ,N. Sai Sindhu ,B.Pavan Kalyan4 , M.Pradeep5
SOLUTION FOR BIKE RIDER ALCOHOL DETECTION 1007 WITH AUTOIGNITION 24 CH. Naga Srinivas1 ,M.Kalyani2, M.Dhanalakshmi3, M.Bhargav4, ,N.Chandravardhan5, NIGHT VISION PATROLLING ROBOT USING 1008 RASPBERRY PI 25 A.N.L. Harisha1, G .Vamsi krishna2, K .Sruthi3, MD Aftab4,
www.anveshanaindia.com [email protected]
11 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
K. Manikantaswamy5
IOT BASED SPEED CONTROL, ACCIDENT DETECTION 1009 AND RESCUE SYSTEM 26 Ch.Naga Srinivas 1, N.Mani Manjari2, N.Pujitha3, K.Revanth4, K.Kishan5 SMART ATTENDANCE USING RFID 1 2 3 4 1010 Y.Naveen, M.Sai Ramya, M.Navya, M.Vamsi Srinivas, 27 5K.Sai Rahul
ALCOHOL DETECTION WITH ENGINE LOCKING 1011 SYSTEM USING GPS AND GSM MODULES 28 A.N.L.Harisha1 , Md. Asma Parveen2, M.Prasad3, M.Anitha4, K.Sai Kumari5"
WIRELESS AUTOMATIC POWER METER READING WITH INSTANT BILLING SYSTEM 1012 29 P.Bhagya Sri1,K.Jeevitha2,K.Hima Sri3, M.Krishna Mohan4, N.Sai Kiran5
PREPAID ELECTRICITY ENERGY METER USING ARDUINO AND GSM MODEM 1013 30 1Y. Lavanya, 2M.A.S. Sri Lalitha, 3N.Karuna, 4N.Kiran, 5L.Prabhudeva.
REAL TIME WATER QUALITY MONITORING 1014 USING WSN 31 1N. V. D. P. Murthy, 2Md. Raheela, 3Md. Abdul Ahad, 4M. Anil Kumar, 5N.Sai Pavan Nagireddy. $RSS JAMMER 1015 Dr. Dola Sanjay.S1, S.C.G.Shravani2, P. Ramsai , M . Sai Vineeth4 32 R . Satish Kumar5
MATLAB/SIMULINK BASED DESIGN AND SIMULATION 1016 OF SQUARE PATCHMICROSTRIP ANTENNA 33 1J. Prasanth Kumar, 2 P. Stella Bright, 3M. Siva Lavanya, 4S. Akhil,
www.anveshanaindia.com [email protected]
12 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
5S. Naveen Kumar
IMPLEMENTATION OF SYNCHRONOUS CIRCUIT 1017 FOR LOW POWER APPLICATIONS 34 1Sridhar Done, 2R.V.R.N.S.Ramya, 3P. Sai Likhitha, 4P.Rishitha,5V.Krishna Sai HEXAGONAL MICROSTRIP PATCH ANTENNA FOR WIRELESS APPLICATION 1018 1Dr.B.S.Sathish, 2P.Satya Sai, 3N.MaheshBabu , 35
4P.Durga Bhavani , 5P.Shanmukh Sai
INDIGENOUS WASTE SORTING MACHINE 1019 1Dr N. Sangeetha Priya, 2T. Shruti Patricia, 3P. Gayathri, 36 4Y. Murali Krishna, 5P. Bhanu Anusha. ANTHROPOID SAFETY CAUTION SYSTEM FOR OBSTACLE AND MASSIVE FOG 1 2 1020 Durga Prasad Rajulapati ,Srirama Moulika Preethi , 37 Ravva Naga Priyanka3,Vegireddy Jahnavi 4, Pothana Neel Pavan Sai 5
AN IOT BASED WIRELESS PATIENT HEALTH 1021 MONITORING SYSTEM 38 M. Rama Krishna1, Sk. Dilshad Begum2, P. Durga Dedeepya3, U. Naga Ravi Krishna4, P. Venkata Ramanuja5
A CIRCULARLY POLARIZED SELF SIMILAR 1022 WIDEBAND ANTENNA FOR RECENT WIRELESS 39 APPLICATIONS G. Sandeep1 ,P.Sudeepthi2, T.Sudheer3, T.Suneeta4, P.Naresh5, DESIGN OF ADVANCED PROTECTIVE SYSTEM FOR 1023 WOMEN 40 M.Sivaji 1 ,S Chandana 2, T Suma3, P Vijay Durga4, N Jagadeesh5.
1024 QUALITY AND QUANTITY SURVIALENCE OF WATER 41 RESERVIOUR USING IOT
www.anveshanaindia.com [email protected]
13 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
1P. Bhagya sri,2V. Sai mounika, 3V.B.S.Simha Nandini, 4V.Teja sai,5V.Tejaswi
A MINIATURIZED STAR HEXAGONAL FRACTAL ANTENNA FOR DUAL BAND APPLICATIONS 1025 42 R.Vijaya Lakshmi1, R.Neeharika2, P.Pavithra3, S.Lavanya4 Y.Sravani5
IoT APPLICATION ON SECURE SMART SHOPPING 1026 SYSTEM 43 Y.Lavanya1,V.Niharika2,V.Kumari3,R.J.Sandhya4,U.SuryaTeja5
IMPLEMENTATION OF 1-BIT FULL ADDER USING FULL SWING GATE DIFFUSION INPUT TECHNIQUE 1027 FOR LOW POWER APPLICATIONS 44 V.Sushma1 , U.Roja2 ,R.Sri Manoj3 , P.Saimounika4 P.Edward Richards5 IMPLEMENTATION OF LOW POWER 12T-SRAM CELL AND COMPARE ITS PARAMETERS 1028 45 Dr.L. Bharathi1,R.Divya Sree2,S. Kinnera3,P.Sai Pavan Reddy4, P. Sai Tanuj5
MRP JAMMER B.O 1029 Dr. Dola Sanjay s1, B. Bhavani2, B. Manisha Sai3 ,B. Ramya 46 Tejaswi4 , A. Sai Puneeth5
MICRO CONTROLLER MONITORING SYSTEM FOR 1030 EMPLOYEES’ SAFETY USING SMART HELMET 47 Prof. Dr. Jagan Mohan Rao.S1, Kadha Sruthy2, Chelakanti Harathi3, Kadali Kalyan Narasimha4,Dasari Hemanth Kumar5.
MRI BRAIN TUMOR DETECTION BY USING CLUSTERING TECHNIQUES 1031 48 Dr.L. Bharathi1, K.B.S. Siva Rama Raju2, B. Vinay Kiran Teja3, B. Nithya Sree 4, G. Babji5
www.anveshanaindia.com [email protected]
14 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
SMART VEHICLE SECURITY SYSTEM USING 1032 ARDUINO 49 Dr.B.S.Sathish1 ,B .Anil kumar2, D.Divya3, D.Chakravathi4, A.Mahesh5.
UNSUPERVISED SEGMENTATION OF MEDICAL IMAGES USING LOCAL CENTER OF MASS & SLIC 1033 ALGORITHM 50 Dr.N.SangeethaPriya1 ,Chandini neeraja Akula2, Venkata sesha madhurya Ammu3, 4 5 Srinivas Devarapalli , jaya venkata Madhuri Gaddigopula ,
AN INNOVATIVE TECHNOLOGY FOR VISUALLY 1034 IMPAIRED PEOPLE 51 Durga Prasad Rajulapati1, Naga Nikitha Chennamsetti2, Niteesh Kumar Chinta3 , NavyaJutru4, Jaya Karthik Althi5
IMPLEMENTATION OF LOW POWER SEQUENTIAL 1035 52 FINITE FIELD MULTIPLIER USING DOMINO LOGIC Mr.D.Venkanna Babu1, B.Meena2,Ch.P.Sukanya3, M.Vanisri4, B.Koti babu5. LOW-POWER AND MINIMISED FULL ADDER BY 1036 INTRODUCING NEW XOR AND XNOR GATES 53 D.Sridhar1 ,G.Anitha2 , B.Sunandha3 , A.SeshuJayanth4 , G.Yaswanth5 SMART IRRIGATION BASED ON SOIL MOISTURE USING IOT 1037 54 M. Rama Krishna1, K. Nanda Gopi Krishna2, B. Sailaja3, A. Bhanu Shankar4, D. Lakshmi Prasanna5, B.Bhoomika6
SMART INTERACTIVE OFFICE AUTOMATION 1038 P. Bala Krishna1, CH. Lakshmi Durga2, B. Deepthi3, 55 G. Pawan Kalyan4, B. Anu Sai Tarangini5
1039 ELECTRONIC APRON FOR WOMEN SAFETY 56 Dr.B.S.Sathish1, Ch.Geetha Krishna Priyanka2, A.Akhil babu3,
www.anveshanaindia.com [email protected]
15 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
A. Sravani4, B.Mounika5
PERFORMANCE ENHANCEMENT OF UNDERWATER 1040 IMAGES BY CLAHE AND DSIHE TECHNIQUES 57 1Mr.G.sandeep, 2B.payal, 3D.Balakrishna,4ch.yamini, 5G.hari Prakash . COMPLAINT REGISTER USING XAMPP SOFTWARE 1041 N.V.D.P. Murthy1, Sai Neeharika Geddam2, Upendra Bollina3 58 Ch.Veera Lakshmi4 Murali Krishna Bonthu5 HEAT TRANSFER CHARACTERISTICS FOR MHD NANO 1042 FLUIDS UNDER NUMERICAL CONDITIONS WITH 59 DIFFERENT PARAMETRIC CONDITIONS M.Ramanuja1 V. Nagaradhika2 A STUDY OF DIFFERENT WEB MINING TYPES 1043 60 Lalitendrasingh S. Payal 1& Dr. Yogesh Kumar Sharma 2
HIGH PERFORMANCE VEDIC MULTIPLIER DESIGN 1044 USING VARIABLE PRECISION 61 Hemanth. J, 1 Dr. Dola Sanjay. S 2
EXPERIMENTAL STUDIES ON SOIL STABILISATION BY 1045 USING ALKALI ACTIVATED PALM OIL FUEL ASH 62 Narendra Kumar Adapa, Dr.T.V.S. Varalakshmi
FEATURE EXTRACTION METHODS & SALIENT 1046 OBJECT DETECTION METHODS IN IMAGE 63 CLASSIFICATION T. Venkata Ramana & K.Venugopal Rao MAP REDUCE APPROACH IN BIOLOGICAL 1047 DATA SET 64 Jagannadha Rao D B, Dr. K. E. BalaChandrudu, Dr. Prasadu Peddi
A Deep Machine Learning based Recruitment Scheme 1048 for Massive MIMO-OFDM Data in 6G-based IoT 65 networks G. Jagga Rao,Dr.Y. Chalapathi Rao, Dr. Anupama Desh Pande
www.anveshanaindia.com [email protected]
16 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
AN OPTIMIZED PROBABILISTIC APPROACH FOR 1049 OPTIMAL ECONOMIC DISPATCH, A CASE STUDY OF GESCOM 66
HANUMANTHA RAO A & Dr.K.VIJAYA BHASKAR REDDY
PERFORMANCE STUDY ON AXIAL FLOW GAS 1050 TURBINE AT HIGHER TEMPERATURES 67 K.Chandra Sekhar & B.Sudheer Prem Kumar EFFICIENT SECURE ACCESS CONTROL AND 1051 68 PROTECTION DATA IN BIGDATA ENVIRONMENT P.Latha, Dr. P.Niranjan MAP REDUCE WORKLOADS IN TOOLBOX USING 1052 HADOOP 69 J.SRAVANTHI & DR. P.NIRANJAN
EFFICIENT APPROACH FOR BIG DATA APPLICATIONS
1053 TO IMPROVE PERFORMANCE IN NETWORK 70 B.Swathi, Dr. P.Niranjan
www.anveshanaindia.com [email protected]
17 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
MICROCONTROLLER BASED SELF BOOKING CYLINDER
Paper ID - 1001
A Paper Presented by: Prof.S. Jagan Mohan Rao1, K. Yasaswini2, M.Pooja3, N.M.V.SaiKumar4, M.Hemanth 5 1Professor, Department of ECE, Ramachandra college of Engineering,Vatluru,A.P,India 2, 3, 4, 5Student, Department of ECE, Ramachandra college of Engineering, Vatluru, A.P, India
ABSTRACT: LPG is a need of every household, the rapid development in technology made human life easier but, we don’t know exactly the status of LPG gas completion which leads to inconvenience. It will automatically book the new LPG cylinder and detect the gas leakage. Usually, the capacity of LPG within the Cylinder isn't determined, so we are getting to display the extent of LPG. The level of LPG is measured using the load sensor. Many accidents happen per annum because of domestic gas leakage, so it should be used carefully. As safety and security is the most important factor, we have proposed a gas leakage detection system. Keywords: Node MCU, gas leakage detection, booking system, load cells.
www.anveshanaindia.com [email protected]
18 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
DESIGN & PARAMETRIC ANALYSIS OF BAND REJECT ULTRA WIDEBAND (UWB) ANTENNA USING STEP IMPEDANCE RESONATOR
Paper ID - 1002
A Paper Presented by: 1J Prasanth Kumar, 2N Lavanya, 3M Tireesha, 4K. Sandeep 1Associate Professor, Department of ECE, Ramachandra college of Engineering,Vatluru,A.P,India 2, 3, 4, 5Student, Department of ECE, Ramachandra college of Engineering, Vatluru, A.P, India E.Mail:[email protected], [email protected], thireshamalireddy@gm ail.com, [email protected] ABSTRACT:
The design and analysis of step impedance resonator (SIR) based, compact and band-notch UWB antenna, to minimize the potential interference between wide-band (UWB) and narrow-band (WLAN), has been presented in this paper. The notched band covers the 5.15 GHz to 5.85 GHz WLAN range. The frequency band has been obtained by embedding a SIR near the radiating patch of the antenna. The empirical relationship between the SIR design and band-notch characteristics has also been included in the paper. The UWB patch antenna structure is feed by micro-strip line. The parametric-analysis by varying the parameters the SIR as well as the substrate has been performed, to observe the optimal performance the proposed antenna. The design and functional simulation of the proposed antenna structure is performed by using HFSS-v14. A close agreement between simulated and experimental results for the proposed design has been observed and presented in this paper. The design and results provide ample justification for compatibility and application of the structure in UWB communication over the entire frequency range.
Keywords: Step Impedance Resonator (SIR); Ultra Wide-Band (UWB); Wireless Local Area Network (WLAN); patch antenna
www.anveshanaindia.com [email protected]
19 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
INTEGRITY AUDITING AND DATA SHARING WITH SENSITIVE INFORMATION HIDING IDENTITY-BASED FOR SECURING CLOUD STORAGE
Paper ID - 1003
A Paper Presented by: 1Dr.L.Bharathi.2K.Kusuma Priya, 3K.Manikanta, 4N.Naga Pavani, 5K.Somanath, 2,3,4,5Students, Department of ECE, Ramachandra College of Engineering, A.P, India. 1Professor and Head of the Department, ECE, Ramachandra College of Engineering, A.P, India. ABSTRACT:
In order to address this problem, we propose a remote data integrity auditing scheme that realizes data sharing with sensitive information hiding .In this scheme, a sanitizer is used to sanitize the data blocks corresponding to the sensitive information of the file and transforms these data blocks signatures into valid ones for the sanitized file. These signatures are used to verify the integrity of the sanitized file in the phase of integrity auditing. As a result, our scheme makes the file stored in the cloud able to be shared and used by others on the condition that the sensitive information is hidden, while the remote data integrity auditing is still able to be efficiently executed. Meanwhile, the proposed scheme is based on identity- based cryptography, which simplifies the complicated certificate management. The security analysis and the performance evaluation show that the proposed scheme is secure and efficient.
Keywords: Cloud storage, data integrity auditing, data sharing, sensitive information hiding.
www.anveshanaindia.com [email protected]
20 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
VEHICLE IMMOBILISER FOR THEFT AND ALCOHOL DETECTION
Paper ID - 1004
A Paper Presented by: R.Vijaya Lakshmi1, K.Sai Divya2, K.Iswarya3, K.Deepika4 1Assistant Professor, Department of ECE, Ramachandra College of Engineering, A.P., India 2,3,4Student, Department of ECE, Ramachandra College of Engineering, A.P., India Email:[email protected] , [email protected], [email protected] , [email protected]
ABSTRACT: The objective of this paper is to prevent the vehicle theft which is a main problem now-a- days and also to reduce the road accidents caused due to drink and drive. In this paper a fingerprint module is used to provide access to the person to drive the vehicle. The access is given only to the person whose fingerprint is already registered. If the fingerprint does not match the vehicle will not start. An alcohol sensor is used to reduce the accidents due to drink and drive in such a way that the vehicle will not start if the person consumes alcohol.
Keywords: Arduino UNO, R307 fingerprint, MQ3 alcohol sensor.
www.anveshanaindia.com [email protected]
21 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
A SECURE INTEGRITY CHECKING SYSTEM FOR SRAM
Paper ID - 1005
A Paper Presented by: P.Bala Krishna1, Komal Kumari2, K.Sowmya3, M.Jahnavi4, K.Raghu Babu5. 1Assistant Professor, Department of ECE, Ramachandra College of Engineering, A.P., India 2,3,4,5Student, Department of ECE, Ramachandra College of Engineering, A.P., India
ABSTRACT: Recent advances in static random access memory (SRAM) as high density, non-volatile, low power, and faster memory systems drive the requirement for devising a more lightweight integrity checking system for SRAM. During this paper, we design a brand new tag generation system for integrity checking of SRAM. An analytical approach to model such a tag generation process is described during this paper. Security results predicted by the analytical model provide various design options resulting in an optimal system from the angle of considered security properties. The proposed design is simulated to research and verify the protection properties of the system for variety of optimal design options predicted by the analytical model.
Keywords: SRAM, tag generation, non volatile, low power.
www.anveshanaindia.com [email protected]
22 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
EMERGENCY ALERT FOR WOMEN'S SAFETY WITH LOCATION TRACKING Paper ID - 1006
A Paper Presented by: D. Venknna Babu1, M.Durga Bhavani2,N. Sai Sindhu3, B.Pavan Kalyan4 , M.Pradeep5
1Associate Professor, Department of ECE, Ramachandra College of Engineering, A.P., India 2,3,4,5 Student, Department of ECE, Ramachandra College of Engineering, A.P., India. Email: [email protected], [email protected], [email protected],[email protected] [email protected]
ABSTRACT:
This Project exhibits a ladies security location framework utilizing GPS and NodeMCU. The framework can be interconnected with the caution framework and alarm the neighbors. This identification and informing framework is made out of a GPS recipient, Microcontroller, and a Wi-Fi module. GPS Receiver gets the area data from satellites as scope and longitude.The Microcontroller forms this data and this handled data is sent to the client utilizing the Wi-Fi module. Here A Wi-Fi module is inbuilt with the MCU. The Wi-Fi module sends a notice to the IoT cloud. At the point when a lady is in harm's way and requirements self-preservation then she can press the switch which is allocated to her. By squeezing the switch, the whole framework will be initiated then promptly a warning will be sent to a worry individual with an area utilizing IoT and GPS.
Keywords: NodeMCU,GPS Module, physical button, buzzer.
www.anveshanaindia.com [email protected]
23 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
SOLUTION FOR BIKE RIDER ALCOHOL DETECTION WITH AUTOIGNITION
Paper ID - 1007
A Paper Presented by: CH. Naga Srinivas1 ,M.Kalyani2, M.Dhanalakshmi3, M.Bhargav4, ,N.Chandravardhan5, 2,3,4,5 Student, Dept. of ECE, Ramachandra College of Engineering, A.P., India. 1Asst Professor, Department of ECE, Ramachandra College of Engineering, A.P., India Email: [email protected] , [email protected] , [email protected] , [email protected] ABSTRACT:
An accident is an unexpected action, which occurs in a particular situation and place. Carelessness is the major factor for such accident. The government is forcing the drivers to wear helmet during driving. But many of them are not following the rules. We are introducing a smart helmet system which detects that, the person wearing helmet or not and also the system detect the person is drunk. Here we have transmitter in the helmet and receiver at the bike. A switch will be there to ensure that the person is wearing the helmet or not. And also an alcohol sensor is placed in the helmet near the mouth of the driver to check whether the driver is drunk. In this system there is a switch ensures the placing of the helmet in proper manner Alcohol sensors detect the alcoholic content in the rider’s breath. If the rider is not wearing the helmet or there is alcohol content found in rider’s breath, the bike remains off. The bike will not start until the rider wears the helmet and there if there is no alcoholic content present stating that rider did not consume alcohol. A motorcycle helmet is a type of helmet used by motorcycle riders. The primary goal of a motorcycle helmet is motorcycle safety - to protect the rider's head during impact, thus preventing or reducing head injury and saving the rider's life. Some helmets provide additional conveniences, such as ventilation, face shields, ear protection, intercom etc. Keywords: Helmet, Bike, Alcohol sensor, pressure sensor
www.anveshanaindia.com [email protected]
24 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
NIGHT VISION PATROLLING ROBOT USING RASPBERRY PI
Paper ID - 1008
A Paper Presented by: A.N.L.Harisha1, G .Vamsi krishna2, K .Sruthi3, MD Aftab4, K. Manikantaswamy5 [1] Assistant. Professor, Department of Electronics and Communication Engineering Ramachandra college of Engineering, A.P 2,3,4,5Student, Department of Electronics and Communication Engineering, Ramachnadra College of Engineering, A.P ABSTRACT: This paper we propose a security patrolling robot that uses night vision camera for securing any premises. The robotic vehicle moves at particular intervals and is equipped with night vision camera and sound sensors. It uses a predefined line to follow its path while patrolling. It stops at particular points and moves to next points if the sound is detected. The system uses IR based path following system for patrolling assigned area. It monitors each area to detect any intrusion using 360degree rotating HD camera. It has the ability to monitor sound in the premises. Any sound after company is closed and it starts moving towards the sound on its predefined path. It then scans the area using its camera to detect any human faces detected. It captures and starts transmitting the images of the situation immediately on sound or human face detection. Here we use IOT Local Area Network (LAN) for receiving transmitted images and displaying them to user with alert sounds. Thus, we put forward a fully autonomous security robot that operates tirelessly and patrols large areas on its own to secure the facility. Keywords: Raspberry Pi, Robot, cameras.
www.anveshanaindia.com [email protected]
25 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
IOT BASED SPEED CONTROL, ACCIDENT DETECTION AND RESCUE SYSTEM
Paper ID - 1009
A Paper Presented by:Ch.Naga Srinivas 1, N.Mani Manjari2, N.Pujitha3, K.Revanth4, K.Kishan5 1Assistant Professor, Department of ECE, Ramachandra College of Engineering, A.P., India. 2Student, Dept. of ECE, Ramachandra College of Engineering, A.P., India. Emai:[email protected],[email protected] , [email protected] , [email protected], [email protected] ABSTRACT:
The main aim of the paper is to detect the road accidents and to provide immediate help for needy. This system is proposed to control speed of the vehicle, to detect vehicle accident and alert to family members as well as nearby police control rooms and hospitals. Vehicle detecting and alerting system sends a short message to registered mobile number using GPS modules. Speed monitoring is also done by using ultrasonic sensor in our device. Keywords: Ultrasonic Sensor, node MCU, GPS module, vibration sensor.
www.anveshanaindia.com [email protected]
26 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
SMART ATTENDANCE USING RFID Paper ID - 1010
A Paper Presented by: 1Y.Naveen, 2M.Sai Ramya, 3M.Navya, 4M.Vamsi Srinivas, 5K.Sai Rahul 1Assistant professor, Department of ECE, Ramachnadra College of Engineering, Eluru, AP, India. 2,3,4,5UG Student Department of ECE, Ramachandra College of Engineering, A.P, India. Email: [email protected], [email protected], [email protected], [email protected]
ABSTRACT: Our Idea is to work with Smart attendance using RFID Sensor. Attendance is one of the major accept role plays in student, office and other work management. At present we have manual attendance system due to that we have a lot of time taking process to overcome that, reduce the manual work and to save time we came with this idea. In this project, we interfaced RFID Sensor with Arduino IDE and sent RFID data to Thing Speak. In this case, here we are just reading the data from Arduino IDE and then pushing that to Thing Speak from that we get the apt and design the webpage to store the data. So here our device is used to take data from the hardware and sends it in ot the webpage using Thing Speak API. Keywords: Nodemcu (esp32), RFID Reader with Tag, Arduino IDE, Thing Speak.
www.anveshanaindia.com [email protected]
27 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
ALCOHOL DETECTION WITH ENGINE LOCKING SYSTEM USING GPS AND GSM MODULES Paper ID - 1011
A Paper Presented by:A.N.L.Harisha1 , Md. Asma Parveen2, M.Prasad3, M.Anitha4, K.Sai Kumari5" 1Assistant Professor, Department of ECE, Ramachandra College of Engineering, A.P., India 2,3,4,5Student, Department of ECE, Ramachandra College of Engineering, A.P., India. Email:[email protected], [email protected] , [email protected] , [email protected], [email protected]
ABSTRACT:
The objective of this paper is to build a safety system which is integrated with intelligent bike to reduce the probability of two-wheeler accidents and drunk and drive cases. Alcohol sensors detect the alcoholic content in the rider’s breath, there is alcohol content found in rider’s breath, the bike remains off. There is no alcoholic content present stating that rider did not consume alcohol. When the rider crashes, helmet hits the ground and sensors detect the motion and tilt of helmet and report the occurrence of an accident and sends information of the location of accident to the family members of the rider and emergency numbers. Keywords: Alcohol sensor, Arduino Uno, GSM sim900a, tilt sensor.
www.anveshanaindia.com [email protected]
28 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
WIRELESS AUTOMATIC POWER METER READING WITH INSTANT BILLING SYSTEM
Paper ID - 1012
A Paper Presented by: P.Bhagya sri1, K.Jeevitha2,K.Hima sri3, M.Krishna mohan4, N.Sai Kiran5 1Assistant professor,Deaprtment of ECE, Ramachandra College of Enigneering, Eluru, AP, India. 2,3,4,5UG student Department of Electronics and Communication Engineering,
Ramachandra college of engineering, A.P, India Email:[email protected],[email protected],[email protected] om, [email protected],[email protected]
ABSTRACT: AMR (Automatic Meter Reading) is a system in which the reading is taken automatically and the consumer directly comes to know how much electricity has been used. The microcontroller takes the reading from the energy meter and displays the reading on the LCD. The reading of the energy meter is also sent to the mobile the user by a message through GSM modem. Based on those values, the consumer should control the loads. The wireless energy meter reading with instant billing system replaces the normal meter reading with instant billing system is that it reduces the man power and displays the reading of electrical meter instantly by using an display methods and enhance a person to regulate or monitor the usage of electricity. Despite of using man power for billing energy meter this method introduce instant billing using GSM module where every person can check the electricity consumed in their own houses and the bill is directly sent to the mobile phone through GSM and can be paid in any way like as net banking.
Keywords: GSM sim900a, LCD, Energy meter
www.anveshanaindia.com [email protected]
29 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
PREPAID ELECTRICITY ENERGY METER USING ARDUINO AND GSM MODEM
Paper ID - 1013
A Paper Presented by:1Y. Lavanya, 2M.A.S Sri Lalitha, 3N.Karuna, 4N.Kiran, 5L.Prabhudeva. 1Associate Professor, Department of ECE, Ramachandra College of Engineering, A.P, India. 2,3,4,5Students, Department of ECE, Ramachandra College of Engineering, A.P, India. Email:[email protected], [email protected], [email protected], [email protected], [email protected] .
ABSTRACT:
This paper proposed and demonstrated pre-paid Smart Energy Meter that the users will be able to monitor their current power consumptions (bill) anytime from anywhere by using their mobile phone via Short Message Services (SMS). It would be a huge beneficial for the customers if they can monitor their energy meter’s power consumptions (bill) on a real-time basis. Arduino UNO, main controller, was the interface between energy meter and Global System for Mobile communication (GSM) module. GSM module connects the energy meter to users’ mobile phone. Real Time Clock (RTC) DS1307 was used to get the real time to count and store the usage into the EEPROM. The program developed in C language with the Arduino syntax in the Arduino IDE. The proposed system demonstrated its capability to check the current usage (bill), notify when reaching the limit, and reset the usage (bill) successfully, only via accessing GSM-based mobile phone. Keywords: Energy meter, Global System for Mobile Communication (GSM), Arduino UNO, Liquid Crystal Display (LCD) and Relay.
www.anveshanaindia.com [email protected]
30 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
REAL TIME WATER QUALITY MONITORING USING WSN
Paper ID - 1014
A Paper Presented by:1N. V. D. P. Murthy, 2Md. Raheela, 3Md. Abdul Ahad, 4M. Anil Kumar, 5N.Sai Pavan Nagireddy. 1Assistant Professor, Department of ECE, Ramachandra College of Engineering, A.P, India. 2,3,4,5Students, Department of ECE, Ramachandra College of Engineering, A.P, India. Email:, [email protected], [email protected], [email protected], [email protected]
ABSTRACT: The conventional method of testing water quality is to collect samples of water manually and send to the lab to check and analyze. This method is time taking process, wastage of man power and not economical. The water quality measuring instrument that we've implemented checks the standard of water in real time through various sensors (one for every parameter: pH, TDS, Conductivity) to live the quality of water. Smart solutions for water quality monitoring are gaining importance with advancement in communication technology. This system can keep a strict check on the pollution of the water resources and be able to provide an environment for safe beverage.
Keywords: Real Time water quality monitoring system; wireless sensor network.
www.anveshanaindia.com [email protected]
31 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
$RSS JAMMER
Paper ID - 1015
A Paper Presented by: Dr. Dola Sanjay S1, S.C.G.Shravani2, P. Ramsai , M . Sai Vineeth4, R . Satish Kumar5 1Principal, Department of Electronics and Communication Engineering, Ramachandra College of Engineering , Eluru ,534007, Andhra Pradesh, India. 2,3,4,5UG Student , Department of Electronics and Communication Engineering, Ramachandra College of Engineering, Eluru,534007, Andhra Pradesh ,India.
Email: [email protected], [email protected] , [email protected] , [email protected] , [email protected] .
ABSTRACT: The $RSS Jammer is a device designed to inhibit most common Wi-Fi radio frequencies. The most commonly used Wi-Fi frequencies are 2.4 GHz to 5 GHz. The existing Wi-Fi jammers were able to limit the signals ranging from 2.4GHz to 5.3GHz. The proposed system would be able to limit the Wi-Fi radio frequencies ranging from 2.1 GHz ~ 2.5 GHz and 6.1 GHz ~ 6.9 GHz. This jamming device can be used either indoor or outdoor. These frequencies are used by most of the routers and video surveillance devices. This $RSS Jammer act more like a Band Stop Filter which limits certain band of frequencies mainly the Wi-Fi radio frequencies. This compact $RSS Jammer will be designed and simulated using HFSS (High Frequency Structure Simulator). This project was developed in version of ANSYS 2018.0. Keywords: Band stop filter, Gain, Microstrip line.
www.anveshanaindia.com [email protected]
32 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
MATLAB/SIMULINK BASED DESIGN AND SIMULATION OF SQUARE PATCHMICROSTRIP ANTENNA
Paper ID - 1016
A Paper Presented by: 1J. Prasanth kumar, 2 P. Stella Bright, 3M. Siva Lavanya, 4S.Akhil, 5S. Naveen Kumar 1Associate Professor, Department of ECE, Ramachandra College of Engineering, Eluru, A.P. 2,3,4,5UG Student, Department of ECE, Ramachandra College of Engineering, Eluru, A.P.
Email:[email protected], [email protected], [email protected], [email protected], [email protected] ABSTRACT:
This project implements the design and simulation of square patch microstrip antenna operating at 5 GHz used for 5G mobile communication and satellite communication. The advantage of square patch is that, it can be easily fabricated and simplicity in modeling as well as impedance matching. This design implemented using MATLAB software by using Simulink and antenna tool boxes. The return loss, gain, radiation pattern, bandwidth and efficiency are calculated for the proposed antenna and have better results than existing models.
Keywords: wireless communication system (WCS), Antennas, Microstrip patch antenna (MSPA), Directivity, Beam width.
www.anveshanaindia.com [email protected]
33 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
IMPLEMENTATION OF SYNCHRONOUS CIRCUIT FOR LOW POWER APPLICATIONS
Paper ID - 1017
A Paper Presented by: 1Sridhar Done, 2R.V.R.N.S.Ramya, 3P. Sai Likhitha, 4P.Rishitha,5V.Krishna Sai 1Associate professor, Department of Electronics and Communication Engineering, Ramachandra College of Engineering Eluru, Andhra Pradesh, India. 2,3,4,5B.Tech students, Department of Electronics and Communication Engineering, Ramachandra College of Engineering Eluru, Andhra Pradesh, India. Email:[email protected], [email protected], [email protected] [email protected], [email protected] ABSTRACT:
Pulsed-latches came out as an ideal succession that replaces for low power digital circuit, as an alternative of flip-flops low power synchronous circuit is developed by using registers. In this paper, This register is built by using low power latches and the pulse for this circuit is provided by using a pulse generators which is designed to consume less power i.e., 22.0mWand the total power consumed by the proposed design is 16.8mW which makes the proposed design as power efficient design. Moreover, the potency consumption of the clock distribution network is reduced and layout area is reduced with the projected n-bit pulsed- latches as compared to the flip-flop predicated designs.
Keywords: Flip-flop, pulse generators, power efficient, registers.
www.anveshanaindia.com [email protected]
34 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
HEXAGONAL MICROSTRIP PATCH ANTENNA FOR WIRELESS APPLICATIONS
Paper ID - 1018
A Paper Presented by: 1Dr.B.S.Sathish, 2P Satya Sai, 3N.MaheshBabu,
4P.Durga Bhavani , 5P.Shanmukh Sai 1Associate professor, Department of ECE, Ramachandra College of Engineering, Andhra Pradesh, India 2,3,4,5UG student, Department of ECE, Ramachandra College of Engineering, Andhra Pradesh, India Email:[email protected],[email protected],maheshnunna558@gmail. com,[email protected],[email protected]
ABSTRACT: A hexagonal micro strip patch antenna is designed to operate at different frequencies. This antenna is designed on a FR4 epoxy material. The overall size of structure is 28*28mm2. For easy simulation coplanar waveguide structure is used. In this paper we can go through about different structures of antenna which are in the range of ultra wide band, tri band and penta band. The proposed ultra wide band antenna resonates at 7.09GHz. The proposed tri band antenna resonates at 1.36GHz, 5.74GHz and 8.8GHz. The proposed penta band structure resonates at 2.38GHz, 3.64GHz, 6.76GHz, 7.36GHz and 8.98GHz with good radiation characteristics. These antennas are useful for S -, C - and X – band applications.
Keywords: CPW feed, UWB, Triband, Pentaband.
www.anveshanaindia.com [email protected]
35 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
INDIGENOUS WASTE SORTING MACHINE
Paper ID - 1019
A Paper Presented by: 1Dr N. Sangeetha Priya, 2T. Shruti Patricia, 3P. Gayathri, 4Y. Murali Krishna, 5P. Bhanu Anusha. 1Associate professor, Department of Electronics and Communication Engineering, Ramachandra College of Engineering, AndhraPradesh, India 2,3,4,5UG Student, Department of Electronics and Communication Engineering, Ramachandra College of Engineering, AndhraPradesh, India.
ABSTRACT: A Garbage segregation system using pic microcontroller is design in this paper. Advance mechanism for the separation of waste material like metal, glass, paper and plastic is designed. The Sensor Metal detector is used to detector metals. Sensor like LDR and IR with lancer is used to detect waste materials like metal, glass, plastic and paper. Indigenous waste sorting machine is designed by these sensors with pic microcontroller. This system has many advantages like reduction of manpower and also cost. For segregating glass and metal conventional sensors are used and for sorting paper and plastic a sensor using LASER and LDR is developed. A weight sensor and counter is employed to seek out out the quantity of sorted materials. By using the right recycling system, the curse of waste will become blessings for the civilization. The sorting procedure will make recycling more efficient. By means of this waste sorter, the traditional waste management systems are going to be transformed into SMART system. This SMART system will help to form our surroundings more suitable for living, reducing heating and making the planet healthier.
Keywords: Automatic Sorter Machine; Smart waste management, Indigenous waste.
www.anveshanaindia.com [email protected]
36 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
ANTHROPOID SAFETY CAUTION SYSTEM FOR OBSTACLE AND MASSIVE FOG Paper ID - 1020
A Paper Presented by: Durga Prasad Rajulapati 1,Srirama Moulika Preethi 2, Ravva Naga Priyanka3, Vegireddy Jahnavi 4, Pothana Neel Pavan Sai 5 1Associate professor, Department of ECE, Ramachandra College of Engineering, A.P., India. 2,3,4,5 UG Student, Department of ECE, Ramachandra College of Engineering, A.P., India. Email:[email protected], [email protected] , 3 [email protected], 4 [email protected], [email protected] ABSTRACT: Dense snow, pollution, and fog in these days in metropolitan cities have been increased; it becomes a major cause of accidents on roads since it becomes unable to predict the arches and vehicles which are forward and back, though which people are missing their lives. The proposed system ASCOMF (Anthropoid Safety Caution System For obstacle and Massive Fog) deals with the concept of alerting the humans to protect themselves from certain unfortunate incidents, and also make them warn about obstacles which are invisible in heavy mist.
Keywords: LDR Sensor, MQ2 gas sensor, Arduino Uno, GPS, GSM Module, IOT
www.anveshanaindia.com [email protected]
37 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
AN IOT BASED WIRELESS PATIENT HEALTH MONITORING SYSTEM
Paper ID - 1021
A Paper Presented by: M. Rama Krishna1, Sk. Dilshad Begum2, P. Durga Dedeepya3, U. Naga Ravi Krishna4, P. Venkata Ramanuja5 1Associate Professor, Ramachandra College of Engineering, Eluru, Andhra Pradesh, India,534007 2,3,4,5UG Student, Ramachandra College of Engineering, Eluru, Andhra Pradesh, India, 534007 Email: [email protected], [email protected], [email protected], [email protected], [email protected] ABSTRACT: Wireless technology is increasing for the need of upholding various sectors. In these recent years, IoT is the major industrial area especially in automating and also in control. Not only in hospitals but personal health are caring systems developing by IoT technology. According to this smart system, In the general method, doctors play an important role in health checkups for the patients. This process requires a lot of time for registration, appointment, and check- up regularly. Also, reports are to be generated later. Due to this time taking process many people tend to ignore the checkups or will postpone it which may cause a severe condition. This modern system approach reduces time consumption in the process. In recent years, the use of this wireless technology is increasing for the need in various sectors. The body temperature and heart rate are prime parameters that need to be checked. This project gives temperature, heart rate values and also for the patient’s tablets are reminded.
Keywords: Health, Internet of Things, Sensors, Arduino UNO, WiFi.
www.anveshanaindia.com [email protected]
38 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
A CIRCULARLY POLARIZED SELF SIMILAR WIDEBAND ANTENNA FOR RECENT WIRELESS APPLICATIONS
Paper ID - 1022
A Paper Presented by: G. Sandeep1 ,P.Sudeepthi2, T.Sudheer3, T.Suneeta4, P.Naresh5 2,3,4,5 UG Student, 1 Assistant professor, ECE department, Ramachandra College of Engineering, Eluru, AP, 534007. Email [email protected],[email protected], [email protected],[email protected], [email protected], ABSTRACT: A minimized wideband radio wire with round polarization qualities structured on Rogers RT/ Duroid 5870(tm) substrate with steady 2.33 is proposed. This structure comprising of four self-comparable twofold blended symmetrical triangles with hexagonal displayed opening recorded in it. This receiving wire covers IEEE C-band (4-8GHz) frequencies for ground based and airborne climate radar applications. The reproduced and registered parameters of this proposed reception apparatus are displayed in this paper. This radio wire is ease, littler in size and high radiation productivity. Proposed structure keeps up stable radiation attributes in the whole wideband. Keywords: Equilateral triangle patch, hexagonal slot, self-similar structure, wideband, circular polarization.
www.anveshanaindia.com [email protected]
39 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
DESIGN OF ADVANCED PROTECTIVE SYSTEM FOR WOMEN
Paper ID - 1023
A Paper Presented by: M.Sivaji 1 ,S Chandana 2, T Suma3, P Vijay Durga4, N Jagadeesh5. 1Assistant Professor, Department of ECE, Ramachandra College of Engineering, Andhra Pradesh, India. 2,3,4,5UG Student, Department of ECE, Ramachandra College of Engineering, Andhra Pradesh, India. ABSTRACT:
An advanced protective system for women using AURDINO is high secured system not only for women’s can also be used by children. It is a simple and compactable device designed with low cost. This device is used to provide security in real time dangerous situation when women are facing. This device has many advantages like providing alerts to authorised numbers and also shares the geographical location in dangerous situation. So this security system will be very help full to women now a day. GPS module is used for tracing location and GSM for getting information to authorised numbers as message.
Keywords: Women safety, GSM module, GPS module.
www.anveshanaindia.com [email protected]
40 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
QUALITY AND QUANTITY SURVIALENCE OF WATER RESERVIOUR USING IOT
Paper ID - 1024
A Paper Presented by: 1P. Bhagyasri,2V. Sai Mounika, 3V.B.S.Simha Nandini,
4V.Teja Sai, 5V.Tejaswi 1Assistant Professor, Department of ECE, Ramachandra College of Engineering, Andhra Pradesh, India. 2,3,4,5UG Student, Department of ECE, Ramachandra College of Engineering, Andhra Pradesh, India. Email:[email protected],[email protected], [email protected],[email protected],[email protected]
ABSTRACT:
In Now-a-days water is a very important role in our daily life like drinking water and agriculture purpose etc., According to Human Rights Watch, twenty million people in our country are still beverage water contaminated with arsenic. To reduce the water related diseases and stop water population, we’ve to measure water parameters like ph, turbidity, conductivity, temperature etc. Afterwards samples are going to be sending to laboratory for testing and analyzing. So as to save lots of time consumption and reduce manual effort my testing equipments are going to be placed in any water source. As a result this model can detect pollution remotely and take necessary actions. This project a Sensor-based Water Quality Monitoring System uses Arduino UNO act as a base station and data from sensor nodes are going to be send there to. Here this project presents a little prototype of sensor networks consisting of temperature, water level, flow and ph. Then ph and temperature sensor values were sent cloud platform and displayed as a graphical representation on an area PC or User mobile. Moreover Wi-Fi is connected to Arduino which compares sensor values to threshold values and sends an alerts to the agent if they obtained value is above or below the edge value. Keywords: Arduino, PH sensor, level sensor, flow sensor, microcontroller, Buzzer.
www.anveshanaindia.com [email protected]
41 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
A MINIATURIZED STAR HEXAGONAL FRACTAL ANTENNA FOR DUAL BAND APPLICATIONS
Paper ID - 1025
A Paper Presented by: R.Vijaya Lakshmi1, R.Neeharika2, P.Pavithra3, S.Lavanya4 Y.Sravani5 1Assistant Professor, Department of ECE, Ramachandra College of Engineering, Eluru, AP, 534007 2, 3, 4,5UG Student, Department of ECE, Ramachandra College of Engineering, Eluru, AP, 534007
Email:[email protected], [email protected], [email protected], [email protected], [email protected] ABSTRACT:
A reduced double band reception apparatus with fractal structure on Rogers RT/Duroid 5870(tm) substrate with consistent 2.23 is proposed. This structure comprising of two squares which are pivoted in a star style with hexagonal displayed space recorded in it. This radio wire covers IEEE C-band (4-8GHz) frequencies for short range following, rocket direction and airborne catch applications. The reproduced and processed parameters of this proposed reception apparatus are introduced right now. This radio wire is minimal effort, littler in size and high radiation proficiency. Proposed structure keeps up stable radiation qualities at these two groups.
Keywords: Square fix, hexagonal space, double band.
www.anveshanaindia.com [email protected]
42 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
IoT APPLICATION ON SECURE SMART SHOPPING SYSTEM
Paper ID - 1026
A Paper Presented by: Y.Lavanya1,V.Niharika2,V.Kumari3,R.J.Sandhya4,U.SuryaTeja5 1Associate Professor, Department of ECE, Ramachandra College of Engineering, Eluru, Andra Pradesh,534007
2,3,4,5UG Student, Department of ECE, Ramachandra College of Engineering, Eluru, Andra Pradesh,534007 Email:[email protected],[email protected],3vampugani.kumari@gmail. com,[email protected],[email protected]
ABSTRACT:
The Internet of Things (IOT) is changing human lives by interfacing regular items together. For instance, in a supermarket all things can be associated with one another, shaping a shrewd shopping framework. In such an IOT framework, a modest RFID tag can be connected to every item which, at the point when set into a shrewd shopping basket, can be naturally peruse by a truck furnished with a RFID per user. Accordingly, charging can be led from the shopping basket itself, forestalling clients from holding up in a long line at checkout. Also, brilliant racking can be included into this framework, furnished with RFID per users, and can screen stock, maybe additionally refreshing a focal server. Another advantage of this sort of framework is that stock administration turns out to be a lot simpler, as all things can be naturally perused by a RFID per user rather than physically filtered by a worker. To approve the possibility of such a framework, right now recognize the structure prerequisites of a brilliant shopping framework, fabricate a model framework to test usefulness, and plan a safe correspondence convention to make the framework pragmatic. As far as we could possibly know, this is the first run through a savvy shopping framework is proposed with security viable. Keywords: IOT, Smart Shopping, RFID, Security.
www.anveshanaindia.com [email protected]
43 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
IMPLEMENTATION OF 1-BIT FULL ADDER USING FULL SWING GATE DIFFUSION INPUT TECHNIQUE FOR LOW POWER APPLICATIONS
Paper ID - 1027
A Paper Presented by: V.Sushma1 , U.Roja2 ,R.Sri Manoj3 , P.Saimounika4 P.Edward Richards5 1Asstitant .Prof .Ramachandra college of Engineering, Eluru, AP 2,3,4,5 U.G Student Ramachandra college of Engineering, Eluru, AP
Email:[email protected] , [email protected] , [email protected] , [email protected] [email protected]
ABSTRACT:
This paper introduces a plan which gives full swing output for logic 1 and logic 0 for 1-bit full adder cell also; decreases power utilization, delay, and area. Right now configuration full adder comprises of two XOR gate cells and one cell of 2x1 multiplexer (MUX). The exhibition of the proposed configuration contrasted and the diverse logic style for full adders through Digital schematic and micro wind software based on 90 nm technology with 1.2v power supply voltage at 1GHz the simulation result has good speed and accuracy.
Keywords: Full adder, Gate Diffusion Input (GDI), multiplexer.
www.anveshanaindia.com [email protected]
44 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
IMPLEMENTATION OF LOW POWER 12T-SRAM CELL AND COMPARE ITS PARAMETERS
Paper ID - 1028
A Paper Presented by: Dr.L.Bharathi1, R.Divya Sree2,S. Kinnera3,P.Sai Pavan Reddy4,P. Sai Tanuj5 1Professor, Department of Electronics and Communication, Ramachandra College of Engineering, Eluru, Andhra Pradesh. 2,3,4,5B. Tech students, Department of Electronics and Communication, Ramachandra College of Engineering Eluru, Andhra Pradesh.
ABSTRACT:
The development of versatile battery worked has made low power IC design. The SRAM cell units turned into vital part in current system on chip. SRAM is a semiconductor memory used to store each bit, it is a volatile memory. SRAM cells are used in many applications like micro core processors. SRAM cell improves the both read stability and write ability at low supply voltages. This reduces a static dissipation of cell. The fast development of versatile battery worked gadgets has made low power IC design for SRAM power, stability; delay and area are the real concerns. This implementation is developed in mentor graphics software tool. This paper represents an improved 12T SRAM cell with the following advantages like reduced leakage current and enhanced performance of transistors reduction in power consumption and increases in data transmission. The SRAM cell is the need of high speed computing system. The switching of transistors and leakage current during results is less power consumption in this cell. In this paper we focused on power, low voltage, and reduced leakage current and an upgraded for the development of 12T-SRAM cell for low power consumption. Keywords: low voltage, low power, reduces leakage current.
www.anveshanaindia.com [email protected]
45 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
MRP JAMMER B.O
Paper ID - 1029
A Paper Presented by: Dr.Dola Sanjay S1, B. Bhavani2, B. Manisha Sai3 ,B. Ramya Tejaswi4 , A. Sai Puneeth5 1 Principal, Department of Electronics and Communication Engineering, Ramachandra College of Engineering, Eluru, Andhra Pradesh, India. 2 , 3, 4, 5 B. Tech Student, Department of Electronics and Communication Engineering, Ramachandra College of Engineering, Eluru, Andhra Pradesh, India.
Email: [email protected], [email protected], [email protected], [email protected], [email protected] ABSTRACT: This Paper presents a planar Microstrip Bandstop filter with the utilization of ellipse structure. The bandstop filter has been designed with the use of step impedance microstrip line on the highest of substrate. It produces stop band from the frequency range of 1.8GHZ to 2.3GHZ with the stop band attenuation quite 30dB. It provides relative 3dB bandwidth response. The tuning of frequency has been administered with the change in dimension of ellipse. A simulation has been performed on ANASOFT High frequency structure simulator (HFSS) and therefore the design has been verified with ANASOFT designer 8.0 Software
Keywords: Attenuation, Band stop filter, Ellipse structure, Microstrip line, Patch.
www.anveshanaindia.com [email protected]
46 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
MICRO CONTROLLER MONITORING SYSTEM FOR EMPLOYEES’ SAFETY USING SMART HELMET
Paper ID - 1030
A Paper Presented by:Prof. Dr. Jagan Mohan Rao.S1, Kadha Sruthy2, Chelakanti Harathi3, Kadali Kalyan Narasimha4,Dasari Hemanth Kumar5. 1Professor Department of Electronics and Communication Engineering, Ramachandra College of Engineering, Eluru, Andhra Pradesh, India. 2,3,4,5B. Tech Students, Department of Electronics and Communication Engineering, Ramachandra College of Engineering, Eluru, Andhra Pradesh, India.
Email: [email protected], [email protected], [email protected], [email protected], [email protected].
ABSTRACT:
In work place environments such as industrial or construction sites to shield the head from injury, due to falling objects or impact with other objects. For saving worker’s life we have to make a tool with smart actions to keep worker’s life safe. Many techniques were offered before based on different technologies like Arduino, 3AAccelerometer, IOT. The Smart helmet is that the proposed solution which can keep track the worker health conditions, and locate his place within the location by using ARM microcontroller, GSM modules and a group of sensors. Keywords: Microcontroller, GSM, 3A Accelerometer, Node MCU, Battery.
www.anveshanaindia.com [email protected]
47 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
MRI BRAIN TUMOR DETECTION BY USING CLUSTERING TECHNIQUES
Paper ID - 1031
A Paper Presented by: Dr.L.Bharathi1, K.B.S. Siva Rama Raju2, B. Vinay Kiran Teja3, B. Nithya Sree 4, G. Babji5 1Professor and Head, Department of ECE, Ramachandra College of Engineering, Eluru 2,3,4,5UG Students, Department of ECE, Ramachandra College of Engineering, Eluru, Andhra Pradesh, India. Email: [email protected], [email protected], [email protected], [email protected], ,[email protected]
ABSTRACT: Segmentation of various images while processing the images is a very crucial technique nowadays. In recent years the field of image segmentation on MRI brain images while gives us more information that is used for the detection of tumours and irregularities in the brain. Image segmentation knowledge separates the image into various defining areas, and needed data is extracted. General segmentation technology is based on the threshold segmentation method, based on the region segmentation method, the segmentation method based on the edge, and the segmentation method based on the specific theory. In this paper study, the different clustering methods in image segmentation are explained. The pre-processing stage involves noise addition and removal. While the traditional clustering image segmentation algorithm is applied for image segmentation where accuracy is low, this put forward a kind of fuzzy control based on C-means clustering image segmentation method that provides the best accuracy while detecting tumours and irregularities in MRI brain images. Here the comparison of K-Means along with Fuzzy C-Means segmentation technique. That clearly shows the difference between both K Means and Fuzzy C-Means technique. The experimental results show that the algorithm in clustering optimizes the performance while imaging segmentation, edge clear.
Keywords: Image segmentation, K-Means, Fuzzy C-Means clustering algorithm, Optimization.
www.anveshanaindia.com [email protected]
48 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
SMART VEHICLE SECURITY SYSTEM USING ARDUINO
Paper ID - 1032
A Paper Presented by: Dr.B.S.Sathish1 ,B .Anil kumar2, D.Divya3, D.Chakravathi4, A.Mahesh5. 2,3,4,5 UG Student, 5 Associate professor, Department of ECE, Ramachandra College of Engineering, Eluru, AP, 534007. Email:[email protected],[email protected],devabattuladivya123@gmai l.com3,[email protected],[email protected]
ABSTRACT: Vehicle theft is one of the significant issues looked by regular society today. Bits of knowledge show vehicles that get taken only 1 /4 of them recovered. Current structures use key and remote to jolt the vehicle. On basic level territories, CCTV cameras are accessible which are used to locate the taken vehicle. In any case, at various spots, CCTV cameras are missing. Control of vehicles and data on their region a lot after a theft can help the recovery of the taken vehicle quickly. The proposed structure helps with finding the zone of the vehicle using GPS also the vehicle speed is a tiny bit at a time diminished by reducing the pace of turn over motor using a GPS. It assists with finding the vehicle following understanding its taken. As GPS is used, the region is moreover known. The request sent from adaptable goes to the GSM system which is interfaced with a controller which decreases the speed of the turn over motor and immobilizes it. The made structure is trustworthy, ease and in the event that it gets taken.
Keywords: GPS Module, Arduino Uno R3, GSM SMS 800L.
www.anveshanaindia.com [email protected]
49 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
UNSUPERVISED SEGMENTATION OF MEDICAL IMAGES USING LOCAL CENTER OF MASS & SLIC ALGORITHM
Paper ID - 1033
A Paper Presented by: Dr.N.SangeethaPriya1 ,Chandini neeraja Akula2, Venkata sesha madhurya Ammu3, 4 5 Srinivas Devarapalli , jaya venkata Madhuri Gaddigopula , 1,2,3,4 Student, Dept. of ECE, Ramachandra College of Engineering, A.P., India. 5 Associate professor, Dept. of ECE, Ramachandra College of Engineering, A.P., India
Email: [email protected] [email protected], [email protected],[email protected], [email protected], ABSTRACT:
Now days segmenting medical images is a region of interest for many researchers that always makes the image processing an important research area this always facilitated by automatic computational techniques? In general the supervised methods, although highly effective, require large training datasets of manually labelled images that are labour-intensive to produce. Unsupervised methods, on the contrary, can be used in the absence of training data to partition new images. Hence the introduction of a novel approach for supervising image segmentation that based on the computation of the local centre of mass with SLIC algorithm. We propose an efficient method to group the pixels of a 2D X-ray image of knee image. The proposed method outperforms the previous method in an efficient way by segmenting the image based of region.
Keywords: LM, SLIC, Segmentation, unsupervised image.
www.anveshanaindia.com [email protected]
50 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
AN INNOVATIVE TECHNOLOGY FOR VISUALLY IMPAIRED PEOPLE
Paper ID - 1034
A Paper Presented by: Durga Prasad Rajulapati1, Naga Nikitha Chennamsetti2, Niteesh Kumar Chinta3 , Navya Jutru4, Jaya Karthik Althi5 1Associate Professor, Depatment. of ECE, Ramachandra College of Engineering, AP., India.
2,3,4,5UG Student, Dept. of ECE, Ramachandra College of Engineering, A.P., India Email:[email protected], [email protected], [email protected], [email protected], [email protected] ABSTRACT:
This is an innovation for the blind people with the help of various subjects like programming building, equipment structuring and prosperity science which urges the visually impaired individuals to explore with speed and certainty by identifying the close by impediments upto the 3meters utilizing the assistance of ultrasonic waves and inform them with a signal sound or vibration. Utilizing this sensor, outwardly impeded can recognize the items around them and can travel effectively. At the point when the sensor recognizes any article it will tell the client by blare or vibration. This is a programmed gadget and battery is appending with the sensor and it sense the battery charging levels and gives the sign by sound to the client before 8hours that the charging would have been low. As a visually impaired additionally by hearing that sound the client will be modify and will be notice that to their relatives. At last gear implies our venture will append a walking stick.
Keywords: Ultra Sonic Sensor HC-SR04, Arduino, Buzzer, IR sensor.
www.anveshanaindia.com [email protected]
51 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
IMPLEMENTATION OF LOW POWER SEQUENTIAL FINITE FIELD MULTIPLIER USING DOMINO LOGIC
Paper ID - 1035
A Paper Presented by:Mr.D.Venkanna Babu1, B.Meena2 , Ch.P.Sukanya3, M.Vanisri4, B.Koti babu5. 1 Associate Professor, Department of ECE, Ramachandra College of Engineering,Vatluru. 2,3,4,5 UG student, Department of ECE, Ramachandra College of Engineering,Vatluru
Email:[email protected], [email protected], [email protected],[email protected] ,[email protected]
ABSTRACT: In early times, the designers had a concern about area & speed of a circuit. Hence the designers adopted an IC technology. Now a days, there is a wide spread of portable electronic devices & evaluation of micro electronics technology. Portable devices require low power designs; it is possible by reducing power dissipation of components. This Paper presents an efficient low power sequential finite field multiplier. The main building block of a multiplier is designed using domino logic. Our main objective is to reduce power dissipation of a multiplier. By reducing power dissipation the overall efficiency of signal transmission increases, reduces the power losses. A multiplier plays an important role in digital signal processors, cryptography and logical operations.
Keywords: Domino logic, Cryptography, Power dissipation, Portability.
www.anveshanaindia.com [email protected]
52 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
LOW-POWER AND MINIMISED FULL ADDER BY INTRODUCING NEW XOR AND XNOR GATES
Paper ID - 1036
A Paper Presented by: D.Sridhar1 ,G.Anitha2 , B.Sunandha3 , A.Seshu Jayanth4 , G.Yaswanth5 1 Associate Professor, Department of Electronics and Communication Engineering, Ramachandra College of Engineering, Eluru, Andhra Pradesh, India. 2,3,4,5 B. Tech Students, Department of Electronics and Communication Engineering, Ramachandra College of Engineering, Eluru, Andhra Pradesh, India.
ABSTRACT:
In this paper, novel circuits for XOR/XNOR circuits and simultaneous XOR-XNOR circuits are designed. These circuits have effective utilization in the areas of low power dissipation and delay. Six new hybrid circuits are proposed using novel full swing XOR/XNOR functions. Every circuit has its own benefits in speed and power consumption. These circuits are designed using MENTOR GRAPHICS LICENSED tool. With this a new transistor measuring strategy is obtained.
Keywords: XOR/XNOR circuits, full swing XOR/XNOR, MENTOR GRAPHICS LICENSED TOOL, NMOS, PMOS, invertors, voltage sources.
www.anveshanaindia.com [email protected]
53 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
SMART IRRIGATION BASED ON SOIL MOISTURE USING IOT
Paper ID - 1037
A Paper Presented by: M. Rama Krishna1, K. Nanda Gopi Krishna2, B. Sailaja3, A. Bhanu Shankar4, D. Lakshmi Prasanna5, B.Bhoomika6 1Associate professor, Department of ECE, Ramachandra College of Engineering, Eluru, Andhra Pradesh, India. 2,3,4,5,6B. Tech Student, Department of ECE, Ramachandra College of Engineering, Eluru,Andhra Pradesh, India.
Email: [email protected],[email protected],sailajabommagani24@gmai [email protected], [email protected].
ABSTRACT: Agriculture is the backbone of all developed countries. It uses 3/4th of available freshwater resources on the earth and this percentage continues to be dominant in water consumption because of the increase of population count and increased need for food. Due to this, efficient water management is the major concern in many cropping systems in arid and semi-arid areas. An automated irrigation system is required to optimize the utilization of water for agricultural crops. The need for an automated irrigation system is to overcome over-irrigation and under irrigation. So irrigation is utilized in the agriculture field. In an irrigation system, depends on the soil type that is provided to the plant. In agriculture, two things are very important, first to get information about the fertility of the soil and second to measure moisture content in the soil. Now a day, for irrigation, different techniques are available which are used to reduce the dependency of rain. And mostly this technique is driven by electrical power and on/off schedule. In this technique, a water level indicator placed in a water reservoir and soil moisture sensors is placed in the root zone of a plant. Keywords: Water Management, Agriculture, Irrigation, Water quality, IoT, Node MCU, Arduino
www.anveshanaindia.com [email protected]
54 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
SMART INTERACTIVE OFFICE AUTOMATION
Paper ID - 1038
A Paper Presented by: P.Bala Krishna1, CH.Lakshmi Durga2, B.Deepthi3, G.Pawan Kalyan4, B.Anu Sai Tarangini5 1Associate professor, Department of ECE, Ramachandra College of Engineering, Eluru,Andhra Pradesh, India. 2,3,4,5B. Tech Student, Department of ECE, Ramachandra College of Engineering, Eluru,Andhra Pradesh, India.
Email:[email protected],[email protected],[email protected] om,[email protected],[email protected].
ABSTRACT:
In today’s world automation plays a crucial role in human life. Automation increases the work efficiency and luxury of person. Lately we will find people hanging with mobiles and smart devices, electronic gadgets all the time. However, with the assistances of this companion (mobile or smart devices) most of the tasks are becoming accomplished. Office Automation System (OAS) has been designed for the devices having android base. Thus, the devices with android platform won’t to automate an 8 bit Bluetooth that controls the house or office appliances. For that control as a as witch we use an ON/OFF Relay. The automated approach of controlling the devices/appliances is presented during this paper. This presentation paves thanks to ease the overall method of switch by automation. The subtle technology for brief range wireless communication i.e. Bluetooth is employed here. A maximum of 24 appliances within the range are often controlled using this OAS.
Keywords: Office Automation, Intelligence, sensor system, Microcontroller, User-friendly Interface
www.anveshanaindia.com [email protected]
55 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
ELECTRONIC APRON FOR WOMEN SAFETY
Paper ID - 1039
A Paper Presented by: Dr.B.S.Sathish1, Ch.Geetha Krishna Priyanka2, A.Akhil babu3, A. Sravani4, B.Mounika5 1Associate professor, Department of Electronics & Communications Engineering, Ramachandra College of Engineering, Eluru, Andhra Pradesh, India. 2,3,4,5B. Tech Student, Department of Electronics & Communication Engineering, Ramachandra College of Engineering, Eluru, Andhra Pradesh, India. Email:[email protected],[email protected],[email protected],attalurisravani@ gmail.com, [email protected] ABSTRACT:
In global scenario, the prime question in every girls mind is about her safety and the harassment issues. The sole thought haunting every girl is once they are going to be ready to move freely on the streets even in odd hours without fear about their security. This project suggests a replacement technology to guard women. This project focuses on a security for ladies in order that they're going to never feel helpless. The system consists of various modules like Node MCU; android mobile with 4G SIM (GPS, GSM, and camera), shock circuit, buzzer, and camera .Today there’s many cases which are happening about women. It had been time where we girls needed a change. This project is predicated on women security where women feel protected. This paper describes about safety electronic. Keywords: Emergency Button, BUZZER, Android (GPS Tracker, Camera and GSM Modules), Memory Card.
www.anveshanaindia.com [email protected]
56 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
PERFORMANCE ENHANCEMENT OF UNDERWATER IMAGES BY CLAHE AND DSIHE TECHNIQUES
Paper ID - 1040
A Paper Presented by: 1Mr.G.sandeep 2B.payal, 3D.Balakrishna, 4ch.yamini, 5G.hariprakash . 1Assistant .professor, Department of ECE, Ramachandra College of Engineering, A.P, India 2,3,4,5Student, Department of ECE, Ramachandra College of Engineering, A.P, India
ABSTRACT: To study the various objects of underwater images is the most important topic to many research scholars nowadays. Even the study of vegetation and life plays a crucial role for much advancement of the future generations. The interaction of the light along with the medium with low and high intensities makes the whole study difficult task. The good quality of the images in any field is necessary for this we are proposing a new technique that enhances the quality of the underwater images in the best possible way. In RGB and HSV spaces, which is an innovative method to enhance the images of underwater? The limitation of the contrast due to poor illumination makes us to move toward the combination of two techniques that gives the best performance. The study of this technique out performs all the previous works that had been done by the researches till date. Keywords: Digital Image Processing, Enhancing techniques, image performance increment.
www.anveshanaindia.com [email protected]
57 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
COMPLAINT REGISTER USING XAMPP SOFTWARE
Paper ID - 1041
A Paper Presented by: N.V.D.P. Murthy1, Sai Neeharika Geddam2, Upendra Bollina3 Ch.Veera Lakshmi4 Murali Krishna Bonthu5 1 Associate Professor, Department. of ECE, Ramachandra College of Engineering, A.P., India. 2,3,4,5Student, Department. of ECE, Ramachandra College of Engineering, A.P., India
Email: [email protected], [email protected] , [email protected]
ABSTRACT:
In recent times, it is becoming difficult for the people to communicate with government organizations to register their complaints about the situations happened in their areas like Harassment issues, city Problems, other issues. People are getting scared because their details will be published. Recently government launched Electronic India by taking it as example we launched for the safety of people “Complaint Register”. In this complaint will be send to cyber crime portal without knowing the details of the person. Then people will give complaints without any fear. It is user friendly. If anyone trying to misuse this, details will be stored in database in XAMPP software which is secured in the admin system. If cyber portal show valid proof to administrator then details will be visible.
Keywords: HTML, login, register, username, password, database, mail id
www.anveshanaindia.com [email protected]
58 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
HEAT TRANSFER CHARACTERISTICS FOR MHD NANO FLUIDS UNDER NUMERICAL CONDITIONS WITH DIFFERENT PARAMETRIC CONDITIONS
Paper ID - 1042
A Paper Presented by:M.Ramanuja1 V. Nagaradhika2 1 Department of Mathematics, Marri Laxman Reddy Institute of Technology & Management (Autonomous) Dundigal, Medchal DistHyderabad-500043. INDIA. 2Department of Mathematics, Gitam UniversityBangalore, 562163, INDIA. Email:[email protected]
ABSTRACT: This paper researches the limit layer stream, warmth and mass exchange qualities over a vertical cone loaded up with nanofluid soaked permeable medium with the impact of attractive field, warm radiation and first request compound response subject to the convective limit condition. Likeness change procedure is utilized to change over non-straight incomplete differential conditions into the arrangement of complex normal differential conditions. The computational Finite component strategy has been utilized to tackle the stream, warmth and mass exchange conditions together with limit conditions. The effect of different appropriate parameters on hydrodynamic, warm and solutal limit layers is researched and the outcomes are shown graphically. Besides, the estimations of nearby skin-contact coefficient, pace of temperature and pace of focus is additionally determined and the outcomes are introduced graphically. The examination with recently distributed work is settled on and discovered great understanding. The thickness of warm limit layer is expanded with increment inthe estimations of Brownian movement parameter (Nb) and thermophoresis parameter (Nt). To get non-comparative condition, progression, force, vitality and focus conditions have been non-dimensionalised by common change. The non-comparative arrangements are considered here. The got conditions have been fathomed by express limited contrast strategy with security and union examination.
Key words: Thermophoresis, function of Brownian motion, consistency, focus.
www.anveshanaindia.com [email protected]
59 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
A STUDY OF DIFFERENT WEB MINING TYPES
Paper ID - 1043
A Paper Presented by: Lalitendrasingh S. Payal1 & Dr. Yogesh Kumar Sharma2 1PHD Scholar,Shri JJT University Rajasthan 2HOD, Shri JJTU, Rajashthan [email protected]
Abstract
The World Wide Web is repository where extremely huge amount of information is available and the useful information is mined for making knowledge. Web mining is a data available on internet. Web mining for web pages is a process of discovering and extracting useful and relevant information from extremely large web data. The web is rapidly updating and expanding day by day and huge amount of data are there. In such case web mining is becoming a very challenging task. This paper covers different types of web mining and there usage for retrieving web pages.
Key words— Mining, Data Mining, Web Mining, Web Content Mining, Web Structure Mining, Web Usage Mining
www.anveshanaindia.com [email protected]
60 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
HIGH PERFORMANCE VEDIC MULTIPLIER DESIGN USING VARIABLE PRECISION
Paper ID:1044
A Paper Presented by:Hemanth. J, 1 Dr. Dola Sanjay. S 2 1Department of Electrical Engineering, Research Scholar, Visvesvaraya Technological University, Belgaum, Karnataka 590018 2 Department of Electronics & Communication Engineering, Principal & Professor, Dept. of ECE, Ramachandra College of Engineering, Eluru, 534007
Email:[email protected] [email protected], [email protected]
Abstract - The most computationally intensive component of any processor is multiplier. The design of multiplier especially for floating point architecture is quite difficult. This brief focuses on evaluating the multiplier using the concepts of array multiplier, Vedic multiplier, booth multiplier and carry save multiplier. The designs are evaluated using Xilinx ISE 14.5 Tool and functional verification is performed using ISIM Simulation Tool. Among the various variable precision multipliers used, the vedic multiplier yields highest performance and modified booth multiplier utilizes least area.
Index Terms - Booth Multiplier, Vedic Multiplier, Variable Precision, Floating Point Multiplication.
www.anveshanaindia.com [email protected]
61 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
EXPERIMENTAL STUDIES ON SOIL STABILISATION BY USING ALKALI ACTIVATED PALM OIL FUEL ASH Paper ID:1045
A Paper Presented by:Narendra Kumar Adapaa, Dr.T.V.S. Varalakshmib Associate Professor, Department of Civil Engineering, Ramachandra college of Engineering,AP,Indiaa Assistant Professor, University college of Engineering, Acharya Nagarjuna University, AP, Indiab
Abstract: Clay soil covers a large portion of land India. To improve various properties of these soils, soil stabilization has to be carried out. As we are aware that stabilization of soil improves its engineering properties, chemical and mechanical properties. In the present study clayey soils are stabilized with geopolymer by the combination of Palm Oil Fuel Ash(POFA). Palm oil fuel ash is a by product from the oil palm insutries and the Sodium based alkaline activators and sodium silicates are used as a geopolymer. The effectiveness of geopolymer with palm oil fuel ash is studied in terms of unconfined compressive strength (UCC), California bearing ratio test(CBR). The UCC and CBR values has been compared with soil stabilized with cement. From results of UCC and CBR it is observed that 10% Palm Oil Fuel Ash, 12% sodium silicate,5% sodium hydroxide mix gave better results compared to that of soil stabilized with cement
Keywords : caly soil, palm oil fuel ash, geopolymer, unconfined compressive strength, California bearing ratio.
www.anveshanaindia.com [email protected]
62 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
FEATURE EXTRACTION METHODS & SALIENT OBJECT DETECTION METHODS IN IMAGE CLASSIFICATION
Paper ID:1046
A Paper Presented by:T. Venkata Ramana & K.Venugopal Rao Research Scholar,JNTU Hyderabad, Telangana, India Professor & HOD CSE Department, Narayanamma Engineering College, Hyderabad Email: [email protected], [email protected]
Abstract Identifying the objects in the image is one of the challenging tasks. There exist different types of object with general features like color, shape, size, orientation, intensity etc. With these features if the objects in the images are classified, then the maximum accuracy is not achieved by this kind of classification of the objects by using the primary visual features. By considering all these things, after careful analysis of different papers it was observed that two new areas are concentrating on these types of issues and they are cross traditional retrieval process and the algorithmic process. Apart from the primary visual features, there will be the other features which helps the system to improve the prediction accuracy in the classification of the objects in the image. This paper explains 3 different types of feature extraction methods and compares their accuracy of classification.
Keywords: Image classification, pixel based, region based, global level, deep learning.
www.anveshanaindia.com [email protected]
63 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
MAP REDUCE APPROACH IN BIOLOGICAL DATA SET
Paper ID:1047
A Paper Presented by:Jagannadha Rao D B, Dr. K. E. BalaChandrudu, Dr. Prasadu Peddi Reg No:19217015, Shri JJT University, Rajasthan Principal, Arjun College ofTechnology & Sciences, Hayathnagar Professor, Shri JJT University, Rajasthan ABSTRACT
Bioinformatics research is characterized by voluminous and incremental datasets and complex data analytics methods. The machine learning methods used in bioinformatics are iterative and parallel. These methods can be scaled to handle big data using the distributed and parallel computing technologies. Usually big data tools perform computation in batch- mode and are not optimized for iterative processing and high data dependency among operations. In the recent years, parallel, incremental, and multi-view machine learning algorithms have been proposed. Similarly, graph-based architectures and in-memory big data tools have been developed to minimize I/O cost and optimize iterative processing. However, there lack standard big data architectures and tools for many important bioinformatics problems, such as fast construction of co-expression and regulatory networks and salient module identification, detection of complexes over growing protein-protein interaction data, fast analysis of massive DNA, RNA, and protein sequence data, and fast querying on incremental and heterogeneous disease networks. This paper addresses the issues and challenges posed by several big data problems in bioinformatics, and gives an overview of the state of the art and the future research opportunities.
Keywords —Big data, Bioinformatics, Machine learning, MapReduce, Clustering, Gene regulatory network
www.anveshanaindia.com [email protected]
64 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
A Deep Machine Learning based Recruitment Scheme for Massive MIMO- OFDM Data in 6G-based IoT networks
Paper ID:1048
G. Jagga Rao,Research Scholar,Department of ECEJJTU, Vidya NagarRajasthan, India Dr.Y. Chalapathi Rao, Associate Professor,Department of ECE,VNR VJIET, Hyderabad,Telangana, India Dr. Anupama Desh Pande Professor,Department of ECE,JJTU, Vidya Nagar,Rajasthan, India
In this research work, we investigate robust analysis of 6G technology, trends and applications. Recently, fast organization on fifth-generation (5G) networks has brought incredible freedoms for the empowering data-intensive applications, and welcomes a broadening assumption on the developments of 6G. An essential prerequisite to create 6G organizations is to arrive at information with low inactivity, ease and high inclusion in smart IoT. Subsequently, this paper proposes a novel AI based way to deal with gather information from various sensor gadgets by collaboration among vehicle and UAV in IoT. Initially, low complexity algorithm calculation is used to choose vehicular gatherers to gather huge information from sensor gadgets, which means to boost inclusion proportion and to limit work cost. Secondly, we plan a novel Deep Reinforcement Learning (DRL) method-based course strategy to design assortment courses of UAVs with compel energy, which works on the organization model, speeds up preparing speeds and acknowledges dynamic arranging of flight ways. The ideal assortment course of a UAV is a progression of yields dependent on the proposed DRL-based route strategy. Finally, our extensive analyses show that the proposed plan can exhaustively improve the inclusion proportion of massive data collections and lessen collection costs in smart IoT for the future 6G networks. Index Terms: 6G technology, Massive MIMO, Data collection, smart IOT
www.anveshanaindia.com [email protected]
65 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
AN OPTIMIZED PROBABILISTIC APPROACH FOR OPTIMAL ECONOMIC DISPATCH, A CASE STUDY OF GESCOM Paper ID:1049
A Paper Presented by:HANUMANTHA RAO A & Dr.K.VIJAYA BHASKAR REDDY Research scholar, Department of EEE, MEWAR University Gangrar, Chittorgarh, Rajasthan-312901 Professor, Department of EEE,BVRIT Vishnupur, Narsapur, Telangana 502313
Abstract The concept of probabilistic analysis has been gaining momentum in recent years as opposed to the more passive approach of the 19th century. A broad variety of complex strategies has been established for probabilistic modeling. A common theory behind each factor mentioned is that power systems are basically stochastic, a concept illustrated by the formulation and analysis of both input condition and case parameters as probability variables. The Optimisation Approach in the power system research reflects a primary examination of the importance of power systems for the future development of power resources, reliability and quality. In order to carry out the case study of the Gulbarga Electricity Supply Company Ltd. (GESCOM), a standard approach for economic dispatch with possible load variations has been suggested for this study. Index Terms- Power system Optimization, Economic Dispatch (ED), GESCOM, PAVAGADA solar park
www.anveshanaindia.com [email protected]
66 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
PERFORMANCE STUDY ON AXIAL FLOW GAS TURBINE AT HIGHER TEMPERATURES Paper ID - 1050 A Paper Presented by:K.Chandra Sekhar & B.Sudheer Prem Kumar Research Scholar, Associate Professor, Department of Mechanical QIS College of Engineering and technology Ongole, AP India, 523272 Professor, Department of Mechanical, JNT University, Hyderabad, Telengana, India 500085 [email protected] & [email protected]
Abstract: A parametric study is carried out for aerodynamic performance of turbines including geometrical requirements, thermal requirements, mechanical integrity and manufacturing requirements. Life cycle costs, product cycle time and weight are additional, possible criteria during the parametric study. Preliminary design plays an important role in reaching the final design of the turbine This research work thoroughly focuses on how the blade configuration are designed to achieve the desired output. Development of the axial flow gas turbine was hindered by the need to obtain both a high-enough flow rate and compression ratio from a compressor to maintain the air requirement for the combustion process and subsequent expansion of the exhaust gases. the profile generation, in addition to aerodynamic performance, additional constraints for castability, structural requirements and thermal requirements need to be considered. Thus profile generation is a trade-off between contradicting requirements of aerodynamic performance, structural and thermal performance. Key Words: Axial, Blade, Combustor, Efficiency and Reaction Turbine.
www.anveshanaindia.com [email protected]
67 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
EFFICIENT SECURE ACCESS CONTROL AND PROTECTION DATA IN BIGDATA ENVIRONMENT
Paper ID - 1051
A Paper Presented by:-P.Latha, Dr. P.Niranjan Research scholar mewar university , Chittorgarh, Rajasthan Research supervisor mewar university, Chittorgarh, Rajasthan
ABSTRACT: In our method, we provide a data protection system secures information, gives your data access authority, and also supplies that control with privacy for your information. To preserve the data, it is necessary to use encryption and key control. Letting only the users with allowed access to this information access the information. Only a secret key holder (approved user) can view the plaintext. Once the data is organized, the suggested method separates the raw set of data into some chunks using principles. In the process of clustering, we utilized the Rule system. Because various data sets are analyzed using different conditions, various rules will apply. Data sets on huge scales are effective since there are no strict rules that must be followed by all datasets. There are three layers for accessing the data in our Analysis Technique. Security is of the utmost importance, which is why all layers of data must be protected and some authorized person must have access to the information. Every member of the organization has a unique public key, which enables everyone to see their own data, and each layer inside the organization has one digital signature depending on which they can access or see the information. Keywords: BigData, hadoop, MapReduce, Cryptography.
www.anveshanaindia.com [email protected]
68 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
MAP REDUCE WORKLOADS IN TOOLBOX USING HADOOP
Paper ID - 1052
A Paper Presented by:- J.SRAVANTHI & DR. P.NIRANJAN Research scholar mewar university Chittorgarh Rajasthan Research supervisor mewar university Chittorgarh Rajasthan
ABSTRACT:
Map Reduce toolbox is used for analysing and modelling for assignments making and copying the implementation of artificial assignments. This paper a distinct toolbox for Map Reduce replication using super-computers has developed. The depict work-flows of the Map Reduce Analysis and the Imitation tool-boxes has describes the aptitudes of this tool-box counting how it allows the user to change suggestions of Map-Reduce implementations into a consistent arrangement to perform analysis on workload traces to model the workload to create realistic synthetic workloads and to simulate the execution of these artificial assignments.
Keywords: Parallel Programming distributed system Hadoop map reduces
www.anveshanaindia.com [email protected]
69 | P a g e
Abstract Proceedings of NATIONAL LEVEL CONFERENCE ON RECENT CHALLENGES IN ENGINEERING, SCIENCE AND TECHNOLOGY
NCRCEST2020
Date :- 29th Feb 2020
EFFICIENT APPROACH FOR BIG DATA APPLICATIONS TO IMPROVE
PERFORMANCE IN NETWORK
Paper ID - 1053
A Paper Presented by:- B.Swathi, &Dr. P.Niranjan Research scholar mewar university, Chittorgarh, Rajasthan Research supervisor mewar university, Chittorgarh, Rajasthan
ABSTRACT: Map Reduce is a method for produce and trying to manage massive amounts of data in a decentralized cluster environment. It's been applied to systems such as data handling. Clustering, creating lookup index values, and analyzing log files and a variety of other data analytical methods. Within the having existed throughout the system, medium data is partitioned using a hashing algorithm. Distributing data among reduced tasks. Throughout this Endeavour, the system suggested a new optimization technique on decomposition for address the issue of huge enhancement for huge consequently, a data application and an internet algorithm are included. Designed to improve the partitioning and data aggregation in a in a dynamic fashion. Cost of internet traffic both in online and offline modes and internet based cases, as proved, are effectively diminished. By the general motivation outcome by the different proposals taken and applied
Keywords: Map phase, Reduce phase, distributed system, traffic analysis
www.anveshanaindia.com [email protected]
70 | P a g e