A commitment to world class performance

Spirit of excellence CONTENTS

How Acromat became a leader 2

Why Acromat remains a leader 2

Performance at the top 2

Full in-house service 4

The best seats in the house 4

Our customers expect the best 4

Acromat’s free planning service 5

Design for superior performance 5

Professional installation 6

Maintaining the standard 6

Product Group Index 7

General Specifications 72

Company Safety Policy 72 Acromat has long championed the cause of quality and integrity in gymnasium and sporting equipment. Our company’s commitment to world-class performance in design and manufacturing has resulted in Acromat equipment being consistently selected for use at the highest levels of competition, including the Olympic Games. We simply strive to build the best, for the best. Performance at the top

Acromat is now recognised as a world leader in gymnastic and sporting equipment, with the company’s performance finely tuned to match the high expectations of athletes at all levels of competition. To ensure the needs of gymnasts and Why Acromat remains a leader athletes are met, especially in the critical areas of engineering strength and safety, we design much of our The passion for performance that equipment in close consultation with Lance Otto brought to the design and leading coaches. manufacture of his equipment continues to drive Acromat today Our expertise has seen the adoption under the guidance of Craig Otto. Like of Acromat equipment at many his father, Craig combines his landmark international sporting profession as a mechanical engineer events including: with a lifetime interest in gymnastics. How Acromat became a leader > 1990 Commonwealth Games, He has been prominent as a New Zealand competitor as well as in the The creation of world-class > 1994 World Gymnastic administration of the as gymnasium and sporting equipment Championships, Chairman of the Men’s Gymnastic requires a unique understanding of > 2000 Olympic Games, Sydney Technical and Judging Committees in athletes’ needs at all levels. Not just > 2001 , Brisbane South for many years. their ultra-demanding competition needs, but their vital training Acromat has also been the official In his role as Managing Director, requirements as well. supplier to the Australian Gymnastic Craig’s qualifications and experience Federation for over 30 years. have led to Acromat’s development of Acromat has that depth of cutting-edge computer design understanding because of its deep facilities and computer controlled appreciation of gymnastic production methods. These ensure performance in particular, and athletic on-going advancement in design achievement in general. This innovation and product integrity and knowledge stems from our company’s safety, ensuring further expansion of founder, Lance Otto, whose our international client base. background as a gymnastics competitor profoundly influenced his thinking as a professional mechanical engineer. His knowledge of sporting performance and his quest for innovative engineering solutions resulted in a powerful coupling of skills that attracted the attention of national and international sporting bodies and coaches.

2

The best seats in the house

While Acromat’s reputation is built on the superiority of our gymnastic and other equipment, we are also highly regarded for our innovative approach to the design and manufacture of retractable tiered stadium seating. We design and Full in-house service custom build seating to suit a wide Our customers expect the best range of needs and venues. At the heart of our business is a Acromat’s customers in Australia and In addition to seating, we also design deeply ingrained enthusiasm for overseas include: and manufacture retractable stage exploring new ways of solving > Schools (both government and extensions for theatres and schools. complex engineering problems and for private) inventing and making things. > Sports clubs > Recreation centres This has led us to maintain a full > Premier sporting venues range of services in-house including: > Entertainment facilities > Computer design > Metal fabrication While our customers have diverse > Welding and often highly individual needs, > Jig construction they all have one thing in common. > Wood machining They expect nothing less than the > Painting highest engineering standards to > Upholstering ensure the safety of athletes and the > Specialised gluing techniques general public.

Acromat’s expertise in these diverse areas means we are able to maintain the highest possible standards throughout the manufacturing process as well as ensure timely delivery of product to our customers.

4 Design for superior performance

One of the most astonishing aspects of sport at the highest levels is the way in which performances continue to improve and records continue to be broken. Today’s elite athletes are producing outcomes that even a decade ago would have seemed Acromat’s free planning service improbable.

Sporting equipment must keep pace We are often asked why we don’t with these ever-improving charge for our comprehensive performances through smarter design planning service. The answer is and superior manufacturing simple. We believe it is our standards. Acromat, through its long responsibility to help our customers and personal association with the select the correct equipment for world of gymnastics, has a unique specific sporting needs and programs. understanding of how athletes train Offering this service not only adds and compete. Combining this value but also enhances safety and understanding with excellence in ensures the long-term viability of design results in the creation of major equipment purchases. world-class equipment to match the very best performances. Acromat’s team of sports engineers and facility planners help plan the most efficient and economical use of gymnasium and sporting facilities. This service is especially valuable for: > Architects > Builders > Facility managers > Coaches

Our free planning service embraces such considerations as anticipated pattern of use, projected spectator capacity, games court layouts, recommended positioning of Acromat equipment and optimum seating arrangements. Attention to these details not only ensures the best use of available space but also the most efficient use of the project budget.

5 Professional installation

Because Acromat builds its sporting equipment to meet the highest professional standards, we believe it demands the highest standards of installation. Therefore we strongly recommend that all Acromat equipment be installed by our own service engineers so that it operates correctly and adheres to the required safety standards. Our installation service is available worldwide.

Maintaining the standard

All Acromat equipment is of a very high standard and built to last. However, its use in the quest for high sporting achievement means it will naturally be subject to wear and tear over time. So it is important that regular inspections are carried out and that any maintenance required is performed immediately to ensure the safety of the athletes using the equipment.

As part of our on-going service, we offer maintenance programs and detailed Safety and Maintenance reports. This thorough approach to maintenance extends to Acromat keeping complete client records of all purchases, regardless of how long ago the equipment was bought from us. This enables the speedy replacement of worn or damaged components, or the timely upgrading of equipment.

6 Product Group Index CSK Countersunk kg Kilograms D.L. DeadLoad N.B. NominalBore w. Witworththread F.M.S. Flatmildsteel section R.H.S. Rectangularorsquarehollow mm. Millimetres m. Metres D. Diameter I.D. Insidediameter O.D. Outsidediameter stated) millimeters exceptwhereotherwise (Dimensions arealwaysin Abbreviations Office on1800808451. regard, orphoneAcromatHead will bepleasedtoassistinthis Your localAcromatrepresentative > building: Where anitemistobefixedthe > > this catalogue: To ensurethecorrectpurchasefrom How toorder > > > > > How tousethiscatalogue Catalogue No.7 Acromat GymnasiumEquipment

- Structuralsteeldrawings ceiling - Sectionsoffloor - Internalelevations - Plan the followingarchitectural measurements ofthebuildingor Include allrelevantdetailsand nearest Acromatrepresentative. Acromat HeadOfficeoryour Post, faxoremailyourorderto Quote thePRODUCTNAMEand Price List. find theproductinAcromat A codesuchasA1-1willhelpyou replacement parts. associated equipmentor letter indicatesoptionalitems, A rednumberfollowedbya similar butvaryinsizetotheone Products withoutanumberare indicates theproductinphoto A numberinablackcircle help youfindtheitemneed. The PRODUCTGROUPINDEXwill drawings. CODE. shown. , wallsand

A1 A9 rolleys s &Women’s Rails A8 A7 A6 A5 A4 A3 A2 obble Boards ertical Lift A15 A14 aulting Boxes aulting Equipment aulting Table andHorses, A13 rampolines umbling Trampolines A12 A10

Parallel Bars Mats -Landing, Horizontal Bars– Floor Plates Climbing Ropes,Tracks Safety Belts Beatboards Balance Benches Balance Beams General Gymnasium Wall Bars&Attachments Pommel Equipment Mini, PowerMini&Double Rings andTrapeze Bars Uneven Bars Aerobic Floors Rhythmic GymnasticFloors Spring Floors Floor Areas&Strips Padding Blocks Mat T Wrestling Stetching, Pool,MartialArts, Mats –GeneralPurpose, Hard/Soft, SoftLanding Mats –Supersoft, Carpeted &V Men’ Single &Combination, Outdoor Sockets&Plates Cover Plates Floor Sockets & Attachments Ring&Equipment Ballet Rails Horizontal Ladders Pegboards Jump andReachBoards Score Benches – Electronic Scoreboards &ShotClocks Scoreboards W Medicine Balls Padding Boxes Palm Guards&W Resin Gum Chalk andStands, Protection Nets&Roof Dividing Nets–Removable – SideDrawn Dividing Curtain – V Dividing Curtains Equipment – Foam&T V & RunUpStrips V V & Mushrooms Trampolines T Mini T

imber

inyl Covered

rist Straps

38 37 28 26 25 25 24 24 23 23 22 21 20 18 17 16 15 14 13 12 11 10 45 45 44 44 44 44 44 44 43 43 43 43 43 42 41 41 40 39 36 34 33 32 30 8

A23 A22 A20 A19 A18 A17 , Lacrosse ennis Equipment olleyball Equipment A16

Safety Padding Landing Pits&Equipment Foam Shapes Gymnastic Shoe Gym timeEquipment Games Equipment Clubs &Ropes Gym Balls,Ribbons, High Hoppers Physio &PoolBalls, Gym FunBalls&Hoops Parachutes Storage Brackets&T Court Lining Soccer &HockeyBarriers Hockey Indoor Goals–Soccer T Badminton Equipment Netball Equipment & BeachV Multi-Sport GamesPosts V Winches – OutdoorUse Backboards Basketball Backboards

olleyball

rolleys

,

70 68 66 65 65 64 64 64 64 63 62 62 62 61 60 59 58 56 54 52 46 7 A1 BALANCE BEAMS

1b

1d 1a 1c

1 1f 1e

2a 2b

2

General Specifications 1 1a 2 The design and construction of A1-60 Balance Beam Leg ACROMAT beams conform to Olympic A1-1 Balance Beam - Olympic/F.I.G. Safety Padding Set A1-27 Balance Beam - Fixed Height F.I.G. specifications. Specifications Carpet covered, Acrolite foam, fastened Beam top A1-14 with legs A1-3 that Beams are used for competition and Complete beam consists of beam top with touch tape. Completely covers legs may be fixed at any height and removed training. The lightweight, non-twisting, A1-2 and legs A1-3. and brace from mat to underside of beam. for storage. stable aluminium beam extrusion is Height adjustment: Wind up and down Length: 5000mm. 1b fully padded and covered with non-slip, using removable handle A1-50. Balancing surface width: 100mm. This unique system improves safety; A1-34 Balance Beam Training Pad - moisture absorbent suede. Legs are 2a leg bases do not move when beam Soft, 1000mm long made of steel with non-marking ribbed A1-43 Balance Beam Training Pad - height is changed, eliminating the need Canvas covered foam, 20mm thick. rubber feet. 3500mm long to change mats. Touch tape holds pad firmly onto beam. Canvas covered foam, 20mm thick, Foam beams are used for kindergym and Length: 5000mm. 1c fits over top and sides of beam. primary school programmes as well as Balancing surface width: 100mm. A1-50 Handle - Beam - Height Touch tape holds pad in place. training and fun activities. Height adjustment: 700-1300mm. Adjusting - Replacement Top of pad is same width as beam, Safety A1- 11 Balance Beam - Olympic/F.I.G. Removable for safety. 100mm, for training with added safety. approved Do not use beams on soft or unstable 1d A1-25 Balance Beam Cover Material - Similar to A1-1 but has legs with surfaces. Check beams regularly, ensure A1-54 Knob - Rubber - Replacement Replacement weighted base fitted on the beam top they are in good condition, covers are not Locking knob for height adjustment. Length: 5400mm. slippery or torn and are safe to use. A1-2. Used for national and international 1e Width: 460mm. Repair or replace damaged parts. competitions. X6-11 Foot - Rubber - Replacement For recovering beams. A1-16 Balance Beam - School Model Non-marking ribbed rubber. 2b Similar to A1-1 but with no padding under A1-13 Balance Beam Cover, suede cover. 1f A1-6 Balance Beam Transporters Sewn Ends - Replacement Two timber platforms each with 4 swivel Length: 5000mm. castors.

8 BALANCE BEAMS A1

3b

3a 3

4a 4

5

6 7a

7

3 4 5 7

A1-4 Balance Beam with A1-53 Balance Beam - A1-52 Balance Beam - A1-57 Balance Beam - 60mm high legs Junior, with 250mm high legs Foam Practice Strip Wide Training Fully padded and suede covered Suede covered aluminium beam top High density ‘Acrolite’ foam with touch Suede cover. Fits Acromat beam tops. aluminium beam top A1-14 with legs A1-51 and tape on underside for attachment to Removable touch tape straps hold pad A1-5. legs A1-42. carpeted floorstrips. in place. Length: 5000mm. Length: 3000mm. Length: 5000mm. Length: 2500mm. Width: 100mm. Width: 175mm. A1-44 Balance Beam - A1-33 Balance Beam with Height: 20mm. Junior, with 60mm high legs 250mm high legs 7a Suede covered aluminium beam top A1-51 Fully padded and suede covered A1-67 Balance End Foam Pad - with legs A1-5. aluminium beam top A1-14 and 6 Olympic/F.I.G. approved Length: 3000mm. legs A1-42. A1-70 Balance Beam - Includes screws to fit to exisiting beams. Length: 5000mm. 3a Foam - Gym Fun A1-5 Balance Beam Low Legs, 4a High density foam covered with fire 60mm high - Replacement A1-42 Balance Beam Legs, retardant vinyl. Touch tape provides good Fixed height legs. 200mm high - Replacement stability on carpeted floorstrips or when Fixed height legs. used with gym fun benches or foam 3b vaulting boxes. A1-47 Balance Beam Dust Cover Length: 2400mm. Vinyl cover, secured with touch tape, Height: 300mm. helps protect beam when handled Width at top: 125mm. and stored. Width at base: 265mm. Length: 5000mm.

9 A2 BALANCE BENCHES

1a

1

2

General Specifications 1 2 Timber balance benches may have hooks fitted on one end allowing attachment to A2-1 Balance Bench with A2-10 Balance Bench - Foam - wall bars and other apparatus to provide Hinged Hooks Gym Fun flexibility of use. Benches may also be Timber top, steel tube legs with sealed High density foam covered with fire used upside down. The bottom rail is ends, non-marking feet and timber rail. retardant vinyl. Touch tape provides good ideal for practicing balancing. Hinged plastic coated hooks fitted to stability when used on carpeted Foam benches are designed for kindergym one end. floorstrips or with gym fun beams and or primary school training activities. Length: 3350mm foam vaulting boxes. Width: 250mm Length: 2400mm Safety Height: 300mm Height: 300mm Check equipment regularly. Ensure Timber rail width: 90mm Width of top: 265mm benches are in good order. Repair or Width of base: 400mm replace damaged parts. 1a A2-3 Balance Bench Hooks - Replacement Hinged plastic coated hooks. A2-2 Balance Bench without Hooks

10 BEATBOARDS A3

1 1a 2

3a 3 4 3b

5

General Specifications 1 3 4 F.I.G. specification beatboards and airboards are used for competition and A3-45 Beatboard - International, A3-14 Airboard A3-3 Beatboard - 3 Coil Spring, training. Components are formed from 8 Spring, F.I.G. dimensions Original ACROMAT system. Fully Steel Base high quality veneers of European Beech Fitted with conical springs. Some springs adjustable rebound by altering the Plywood top board with carpeted take off timber laminated under extreme pressure are removable to adjust rebound. pressure in the air bags - suits all area. Steel base has non- slip rubber. and temperature. The top board is curved 9 Spring Positions. gymnasts. Guided travel system - torsion Centre spring is removable when used by to give maximum height and lift at take 1a stabiliser ensures smooth even take off smaller children. Recommended maximum for vaulting. gymnast weight 40kgs. off point. The take off area is padded and A3-28 Beatboard Foot - Rubber - carpeted in a contrasting colour to the Replacement 3a 5 blue mats and vault runs. Legs are fitted Moulded non-slip, non-marking tapered A3-22 Airboard Air Bags and Fittings with non-marking, non-skid feet. ribbed rubber. Easy fixing with two - Replacement A3-60 Beatboard - Foam - Gym Fun Foam beatboards are designed for a screws. Size: 140mm x 70mm Two air bags with hoses. High density Acrolite foam covered with variety of fun activities and skill training 3b fire retardant vinyl. 2 Length: 1200mm for recreation gymnastics, kindergym and A3-28 Beatboard Foot - Rubber - Width: 600mm primary schools. A3-40 Beatboard - Stratum Replacement Height: 200mm Safety F.I.G. Specification Moulded non-slip, non-marking tapered Check beatboards regularly to ensure Fitted with conical springs. Some springs ribbed rubber. Easy fixing with two they are in good order and safe to use. are removable to adjust rebound. screws. Size: 140mm x 70mm Repair or replace damaged parts.

11 A4 SAFETY BELTS

2a

1 2 3

4a

4 5

6 6a 7

General Specifications 2 4 6 ACROMAT Safety Belt Systems are designed for use over trampolines, floor A4-9 Safety Belt System - A4-11 Safety Belt - Bungee, Tumbling A4-2 Safety Belt - Tumbling areas and other equipment. Complex Travelling Overhead Designed for repetition bungee tumbling Ideal for hand-held tumbling skills or for movements can be performed with the The safety belt system travels along cables but ideal also for hand-held tumbling overhead safety belt systems. Acrolite assistance of one coach or spotter. Bungee allowing continuous tumbling movements. skills or overhead safety belt systems. pads covered with soft vinyl. Two hand- systems can be added allowing specialist Cables, 10mm D, are fixed to the building Adjustable waist and leg straps. held ropes with swivels A4-7 are provided. training techniques and high repetition structure. Strong fixing points are required. 4a Webbing with D’s allows adjustment to fit waist size 500mm - 850mm. training. Belts are ordered separately. A4-10 Safety Belt System - A4-12 Bungee Shock Cord Installation Overhead with Linear Control For repetition tumbling training. Attaches 6a When ordering safety belt equipment For use over apparatus or pits where it is between A4-5 or A4-14 safety belt system A4-7 Safety Belt Holding Rope - please supply details and size of the required to fix the system in a particular and A4-11 belt. Includes swivels. Replacement support member or drawing of the building. position. Consists of a travelling safety belt Used with any safety belt when hand-held. 5 ACROMAT’s trained engineers will design system with control ropes and pulleys to move and position safety belt system. 7 and supply all fittings for installation. A4-20 Safety Belt - Wide Tumbling Safety 2a Attaches to any safety belt system or hand- A4-1 Safety Belt - Twisting Check belts, ropes, shockcord and all A4-8 Safety Belt Holding Rope - held ropes. Adjustable leather belt, 150mm Ideal for teaching twisting somersaults pulleys regularly. Ensure they are in good Overhead - Replacement wide, padded with Acrolite and fitted with and dismounts. Lightweight cast condition and safe to use. Repair or replace ball bearing swivels for free rotation. aluminium outer and inner rim separated 3 all damaged parts. Fastened by double webbing straps and by free running ball bearings. Padded buckles. Fits waist size 500mm - 650mm. safety belt with webbing strap and slide A4-14 Safety Belt System - Pulleys & 1 buckle fits most waists. Waist belts Adjustable Straps, Travelling Bungee supported on heavy rubber shock cords. Allows a bungee tumbling system to travel A4-5 Safety Belt System - Overhead Two hand-held ropes with swivels are for use over a tumbling run. These pulleys Used in conjunction with safety belts, provided. Weight of belt 2kg. bungee shock cords and swivels. The and adjustable webbing straps are fitted to pulley and rope system is fixed to the the cables of the A4-9 travelling safety belt roof structure. Belts seperately ordered. system. Belt, bungee shock cord and swivels ordered separately. 12 CLIMBING ROPES, TRACKS & ATTACHMENTS A5

1c 1b

1a

1 1 Stored 2

General Specifications Safety 1a 2 ACROMAT rope track system is designed Check ropes and all fittings regularly. A5-18 Ladder - Add to Rope Track to allow a ladder, trapeze or rings to be Ensure they are in good condition and Roller hangers on extended rope track A5-40 to 43 Climbing Rope - Sisal added to the track. These are ordered safe to use. Repair or replace all support rope ladder A5-16. Rope 32mm D is a soft laid three ply separately. damaged parts. Track length: 1080mm sisal. The top of the rope has a steel clamp bolted and riveted forming A heavy duty track is attached to a 1 A5-16 Ladder a closed loop. A vinyl sock is spliced and structural member by clamps X4-600 or Webbing 50mm, supports hardwood rungs sewn at the bottom of the rope to X-601. Roller hangers are connected to Rope Tracks 25mm D at 300mm centres. Length to suit prevent fraying. Please advise length the ropes. The hanger allows the rope to No. of Track Acromat customer's requirements. when ordering. move freely in all directions and provides ropes Length (mm) Code 1b long lasting bearing surfaces. A5-40 Climbing Rope 0-1990mm 4 3300 A5-24 A5-19 Trapeze Bar - Add to Rope Track The hauling rope on pulleys moves the Hangers and 5mm D steel cable on extended A5-41 Climbing Rope 2000-2990mm ropes to the working position where it is 5 4050 A5-25 rope track support the trapeze bar with A5-42 Climbing Rope 3000-4990mm fixed by a cleat mounted on the wall. adjustable webbing straps A10-48. 6 4800 A5-26 A5-43 Climbing Rope 5000-8000mm Correct spacing between ropes is Track length: 1250mm maintained by 5mm D chain shackled to 7 5550 A5-27 1c Customer to specify exact length hangers. A wall bracket and chain holds 8 6300 A5-28 A5-20 Rings - Add to Rope Track the ropes to the wall when stored. A5-49 Climbing Rope - Knotted Hangers on extended rope track support 9 7050 A5-29 Ideal for primary school and kindergym Installation the rings with adjustable webbing straps 10 7800 A5-30 activities. Knots at 300mm centres make When ordering rope equipment please A10-2. Track length: 1750mm climbing easier and more fun for small supply details and size of the support Safety ropes fitted to rope tracks are not children. Length to suit customer's member or drawing of the building. designed for swinging. requirements. ACROMAT’s trained engineers will design and supply all fittings required for installation.

13 A6 FLOOR PLATES

4

1 2 3

7

8a 5 6 8

Free Advisory Service 1 4 7 With the variety of sports floors available, eg. air cushion, strip timber (T&G) flooring on A6-1 Floor Plate - Lift Up Hook A6-18 Floor Plate Eye Bolt, 1/2" w A6-17 Floor Plate Hook - Keyhole stumps and bearers or ply sub floor, parquetry Use: Best system for attaching chain where Material: Steel. Finish: Zinc plated. Use: For A6-15 keyhole floor plate. on concrete, synthetic on concrete, the range load pulls at an angle. Eliminates the need for Size: Staple 10mm D with 1/2" w Hook welded to flat plate has a rivet of fixings for cables and posts is large. Please shackles & eye bolts. Hook is counterbalanced set screw. with head protruding under the plate, contact ACROMAT for advice on the best to hinge down when not in use. suits keyhole slot in floor plate. 5 system to suit your floor. ACROMAT designs Material: Steel. Finish: Zinc plated. Material: Steel. Finish: Zinc plated. Size: Disc - 108mm D x 4mm thick. Size: Hook - 10mm D. floor fittings to suit special applications and A6-7 Floor Plate - 13mm D Hole for new flooring systems. Hook - 8mm thick. Use: Locating plate for padbolts or 8 Layouts 2 equipment. 3 CSK holes for fixing. ACROMAT will provide layouts of socket and Material: Steel. Finish: Zinc plated. A6-24 Anchor and Shackle for floor plate positions together with details A6-8 Floor Plate - Lift Up Eye, 13mm D Size: Disc - 108mm D x 4mm thick. Concrete Floor required during the construction of the Use: Floor anchor point for climbing walls Hole - 13mm D in centre of plate. Use: For permanent fixings in concrete building. or where load is vertical. Counterbalanced or for under cover plates. Masonry anchor to hinge down when not in use. 6 has screw in block with a stainless steel Installation Material: Steel. Finish: Zinc plated. shackle for fixing to chain or cable. A6-15 Floor Plate - Keyhole ACROMAT provide a comprehensive Size: Disc - 108mm D x 4mm thick. When reordering replacement parts please Use: For A16-117 badminton posts. Keyhole installation service to ensure correct Plate - 8mm thick with 13mm D hole. specify the thread required. Material: Steel. slot in centre of plate. installation and operation. Finish: Zinc plated. Size: Depth-65mm. 3 Material: Steel. Finish: Zinc plated. Thread - 5/8” w or M16. Ordering Size: Disc - 108mm D x 4mm thick. Please provide drawings of the building - A6-6 Floor Plate - 1/2" w Thread 6a 8a a) floor plan b) section of floor Use: Anchoring equipment with holding A6-78 Similar to A6-15 - Stainless Steel EM1-40 Anchor for Concrete M16 Safety down bolts or eyebolts. Material: Steel. Check all floor fittings regularly. Ensure they Nut welded under plate. Finish: Zinc plated. Size: Depth - 65mm. are clean, flush with the floor and safe to use. Material: Steel. Finish: Zinc plated. Thread - M16. Size: Disc - 108mm D x 4mm thick. EM1-39 Anchor for Concrete M12 A6-77 Floor Plate ½w Thread SS Material: Steel. Finish: Zinc plated. Similar to A6-6 material stainless steel 14 Size: Depth - 50mm. Thread M12 FLOOR SOCKETS A 6

12 13

9a

9b

14

9

10

11 15

9 10 13 14

A6-11 Floor Socket - Flanged, 64mm I.D. A6-20 Under Floor Socket, 79mm I.D. A6-70 Under Floor Pipe with A6-13 Floor Socket - No Flange, 64mm I.D. Use: To support games posts. Use: Supports A6-11 or A6-50 sockets. Flange, 64mm I.D. Use: To support games posts. Flange with 6 CSK holes for fixing, is welded Pipe with closed end is cast into concrete Use: Supports games posts. Similar Similar to A6-11 but with no flange. to a pipe. A centre stem with disc on top under timber floor. to A6-9 under floor sockets. Cast into concrete floor. reduces the opening eliminating the danger of Material: Steel.Finish: Galvanised. Cast into concrete under a floor on bearers Material: Steel. Finish: Zinc plated. open holes and the need to remove cover Size: 79mm I.D 88.9mm O.D. x 290mm deep. and stumps. Length varies to suit distance Size: Socket - 64mm I.D. 76mm OD x plates. Centre cap is removable for cleaning. from floor to ground. 250mm deep. Material: Steel. Finish: Zinc plated. 11 Material: Steel. Finish: Zinc plated. Centre disc - 49mm D. Size: Flange - 145mm D x 4mm thick. Size: 64mm I.D. 76mm O.D. Socket - 64mm I.D. 76mm O.D. x A6-12 Under Floor Pipe, 79mm I.D. A6-74 Floor Socket - No Flange, 250mm deep. Use: Supports A6-11 or A6-50 sockets or A6-72 Under Floor Pipe with 64mm I.D., Stainless Steel Centre disc - 47mm D. large diameter posts. Flange, 64mm I.D. Use: For games posts, hand rails or other Cast into concrete under a floor on bearers A6-71 Floor Socket - Flanged, 79mm I.D. Similar to A6-70 - Stainless Steel removable posts, indoor or outdoor. and stumps. Length varies to suit distance Similar to A6-13 socket. Use: To support larger diameter games A6-69 Under Floor Pipe with from floor to ground. posts. Similar to A6-11. Flange, 79mm I.D. Material: Steel. Finish: Galvanised. 15 Material: Steel. Finish: Zinc plated. Use: Supports games posts. Similar to A6-70. Size: 79mm I.D. 88.9mm O.D Size: Flange - 145mm D x 4mm thick. Material: Steel. Finish: Zinc plated. A6-50 Floor Socket & Access Cover Plate Socket - 79mm I.D. 88.9mm O.D. x 12 Size: 79mm I.D. 88.9mm O.D. Use: To support games posts. 250mm deep. Cast into floor slab or used for timber floors Centre disc - 47mm D. A6-9 Under Floor Socket, 64mm I.D. fitted to underfloor pipes A6-20 or A6-12. 9a Use: To support games posts. Consists of A6-9 socket welded to A6-44 A6-37 Floor Socket Handle Cast into concrete slab under an access cover plate. Reversible cover is recessed for Used to remove centre cap for A16-11 cover plate. Pipe with closed bottom end inlay of floor material. and A6-13. and flange welded to the top. Material: Steel. Finish: Zinc plated. 9b Material: Steel. Finish: Zinc plated. Size: Flange - 145mm D. x 19mm thick. A6-51 Floor Socket Centre Cap - Size: Socket 64mm I.D. 76mm OD x 240mm Socket - 64mm I.D. 76mm OD x Replacement long. Flange 115 O.D. 250mm deep. For A6-11 and A6-13 sockets. 15 A6 COVER PLATES

17

16 18 19

20 21 22

16 18 20 22

A6-44 Cover Plate - Access, A6-43 Cover Plate - Access, A6-2 Cover Plate - Access, Bronze, A6-48 Cover Plate - Access, 120mm I.D. 225mm I.D. 97mm I.D. 120mm I.D. x 8mm Deep Use: For access to fixing points and sockets Use: Large diameter cover for access Use: For access to fixing points or sockets Use: For access to fixing points and sockets under floors. to power or score board cabling. under floors. under synthetic floors. Low profile for Cover is reversible. One side is recessed Cover is reversible. One side is recessed Flange has 6 CSK screw holes for fixing. thinner flooring material. Installed after for inlay of flooring material. Cover is for inlay of flooring. Cover is removed with Cover is removed with A6-46 handle. floor laid. removed with A6-46 handle. A6-46 handle. Material: Bronze. Flange has 3 CSK hole for fixing. Material: Steel. Material: Steel. Size: 145mm O.D. x 19mm deep. Cover is reversible. One side is recessed Finish: Zinc plated. Finish: Zinc plated. for inlay of flooring material. Cover is Size: 145mm O.D. x 19mm deep. Size: 250mm O.D. x 19mm deep. 21 removed with A6-46 handle. Material: Steel. A6-22 Cover Plate - Access, for Inlay 17 19 Finish: Zinc plated. Flooring, Bronze, 97mm I.D. Size: 145mm O.D. x 8mm deep. A6-46 Cover Plate Handle A6-45 Cover Plate - Access, 48mm I.D. Use: For access to fixing points or sockets Simple hook for removing covers. Use: For access to anchors under the floor. under floors. Cover is removed with A6-46 handle. Flange has 6 CSK screw holes for fixing. Material: Bronze. The cover is recessed for inlay of matching Size: 66mm O.D. x 19mm deep. floor materials. Cover is removed with A6-46 handle. Material: Bronze. Size: 145mm O.D. x 19mm deep.

16 OUTDOOR SOCKETS & PLATES A6

23

24 26

25 27

23 24 25 27

A6-42 Socket with Cap - Outdoor, A6-30 Socket with Cap - Outdoor A6-40 Puddle Flange Socket - A6-76 Floorplate 1/2 w - with drainage tube Use: Cast into concrete to support Stainless Steel Stainless Steel Use: Cast into concrete to support games posts. Use: For sports courts on the roof Use: For games posts outdoors. games posts. Hinged cap eliminates danger of a building. Suits holding bolts 1/2 w. Pipe with tube at bottom allows water of open pipe. Puddle flange is cast into concrete slab Insert cast into concrete has a cover to drain away. Hinged cap eliminates Material: Steel. where moisture barrier is required. A6-39 with nut welded underneath. danger of open top. Finish: Hot dip galvanised. socket is then grouted inside the puddle Cover is removable for cleaning. Material: Steel. Size: Socket 64mm I.D 76mm O.D. x flange socket. Material: Stainless steel. Finish: Hot dip galvanised. 240mm deep. Material: Stainless steel. Size: 140mm O.D. x 80mm deep. Size: Socket 64mm I.D 76mm O.D. x Size: 125mm I.D x 270mm deep. A6-39 Floor Socket with Cap - 240mm deep. Stainless Steel 26 Use: For games posts outdoors. Socket with hinged cap is similar to A6-30. A6-75 Floorplate Keyhole - Material: Stainless steel. Stainless Steel Size: 64mm I.D 76mm O.D. x 240mm deep. Use: For games posts outdoors. Insert cast into concrete has a cover with keyhole slot. Cover is removable for cleaning. Material: Stainless steel. Size: 140mm O.D. x 80mm deep.

17 A7 HORIZONTAL BARS - SINGLE & COMBINATION, MEN’S & WOMEN’S RAILS

1a

3a

3b

1b

1 3

2 4

General Specifications Wall hinged: These consist of a bar, two 1 3 Horizontal bars and women’s rails conform uprights, one being fixed to the wall and to Olympic F.I.G. specifications. floor, two cables and two floorplates A6-1, A7-1 Horizontal Bar - Olympic A7-2 Horizontal Bar - Wall Hinged plus a wall storage bracket to hold upright The bar attaches to chrome plated Competition type system. Plain galvanised Stainless steel bars are high tensile to against the wall when not in use. ACROMAT swivel head system on cables and floor plates A6-1 supplied. conform to Olympic F.I.G. specifications. adjustable height upright. The cables 3a Ordering are plastic coated for additional safety Fibreglass rails have a timber veneer on A7-4 Spotting Platform Select the type required and connect to 12mm turnbuckles outer surface to improve grip. The padded platform, 500mm x 500mm > competition or training for tensioning. Superwood rails are made from densified is mounted on a steel frame which clamps > free standing or wall hinged Floor plates must be ordered separately. beech veneer with steel cable insert to > type of bar to an ACROMAT horizontal bar or uneven improve strength. - stainless steel 1a bar upright and can be set at any height. A7-11 Crossbar - Stainless Steel An additional base fitting is required to Competition type: Steel tubular uprights - women’s fibreglass or superwood For A7-1 & A7-2. prevent the upright from turning on the with removable threaded height adjusting > type of floorplates to suit the floor. A7-1 and A7-2. pins allow adjustment from 1540mm to Installation 1b 2740mm in 50mm increments. Please provide drawings of the building - X6-12 Foot - Rubber - Replacement 3b For A7-1 and A7-2. A7-15 Replacement Cable - Chain Training type, club or single bar: RHS a) floor plan and Turnbuckle uprights are 50mm square. Bars and rails 2 have ‘U’ shape fitting with toggle pins that b) internal elevations A7-16 Replacement Cable and Chain locate the holes in the uprights. Height b) section of floor and walls. A7-101 Horizontal Bar - Olympic / 4 adjusts from 345 to 2545 in increments of ACROMAT’s trained engineers will design F.I.G. Approved International standard. Similar to A7-1 but 100mm. Floorplates A6-7 locate the bottom and supply all fittings required for A7-45 Single Bar Rail End with high performance bar and swivel head of the uprights. installation. Replaces the fitting on A7-1 horizontal bar fittings. Freestanding: These consist of a bar, two Safety uprights when using A9-13 fibreglass or uprights and four cables. Floor plates must Check bars and all fittings regularly. Ensure A9-54 superwood women’s rails. be ordered separately. they are in good condition and safe to use.

18 HORIZONTAL BARS - SINGLE & COMBINATION, MEN’S & WOMEN’S RAILS A7

6

5

5a 6a

6b

9 5b

5c

7a

7 8

5 6 7 9

A7-32 Horizontal Bar - Club Model, A7-19 Horizontal Bar - Club Model, A7-38 Single Bar on Stands A9-150 Cable space saving system with Stainless Steel Bar - Free with Stainless Steel Bar - Wall Hinged Designed for handstand and balancing Includes padding for uneven bars, Standing training. Timber bar, 1800mm long on high bars and rings. A7- 42 Single Bar - Women’s tubular stands 300mm above the floor. A7-39 Single Bar with Women’s Superwood Rail - Wall Hinged Rubber feet X6-11 protect the floor. Fibreglass Rail - Free Standing A7-41 Single Bar - Women’s 7a A7-40 Single Bar with Women’s Fibreglass Rail - Wall Hinged X6-11 Foot - Rubber - Replacement Superwood Rail - Free Standing A7-29 Combination Horizontal Bar Non marking ribbed rubber. A7-27 Combination Horizontal & Women’s Superwood Rail - Bar & Women’s Superwood Rail - Wall Hinged 8 Free Standing A7-30 Combination Horizontal Bar A7-60 Single Bar - Portable, A7-28 Combination Horizontal & Women’s Fibreglass Rail - Height Adjustable Bar & Women’s Fibreglass Rail - Wall Hinged Ideal for primary school and recreation Free Standing 6a use for indoors and outdoors. Uprights 5a A7-9 Access Platform - Tilt Up support single bar of 34mm D pipe A7-20 Crossbar - Stainless Steel, The padded platform, 500mm x 500mm x 1200mm long. Easy grip for small 50 Sq Ends - Replacement is mounted on a steel frame and is spring children. Rubber feet X6-11 protect the loaded to tilt up when not in use. floor. Dismantles easily for storage. 5b It attaches to holes in 50mm square Adjustable height 1800, 1500, 1200, A7- 25 Rail - Women’s Fibreglass - uprights of single and horizontal bars 900 and 600mm. 50 Sq Ends - Replacement and can be positioned on either side or Recommended maximum weight 5c in line with the bar. Access pegs included. child - 40kg. A7-48 Rail - Women’s Superwood, 6b A7-61 Padding for Base A7-60 50 Sq Ends - Replacement A7-15 Replacement Cable - Chain and Turnbuckle

19 A8 MATS - LANDING

C

A B

1 Diagram relates to tables in 1 & 2

General Specifications The Federation of International Gymnastics the movement of mats during use. Mat - Landing, Carpeted, Olympic / The leading sportsmen and women use (F.I.G.) specifies the exact requirements for F.I.G. International Joinable Mats 2 & 9 ACROMAT mats at major training venues, International Championships and Olympic Landing area for each apparatus is made Mats are secured with touch tape, 50mm such as the Australian Institute of Sport. Games. ACROMAT mats have been tested up of carpeted mats, cover mats and wide minimum, to make larger areas. and approved by the F.I.G. The thickness carpeted touch tape joining strips. ACROMAT selects the very best foams Touch tape on the top surface covers specified is 200mm for all apparatus, A8-250 Mat - Pommel, available for our wide range of gymnastic the joins. except 100mm for pommels. 4000 x 4000 x 100mm and sporting mats. Our policy of continual JAS - joining all sides A8-251 Mat - Rings, development ensures you receive the very Supersoft, Hard-Soft JEO - joining ends only 6000 x 2000 x 200mm best mats available. and Soft Landing Mats 4 to 8 JSO - joining sides only A8-252 Mat - Parallel Bars, For improved safety on landing when Mats with vinyl covers are double stitched Care and Cleaning of Mats 11000 x 6850 x 200mm learning new skills. Generally the thicker for years of trouble free use. The material is Carpeted Mats with Acrolite Foam - A8-253 Mat - Horizontal Bar, the mat, the greater the safety. Vinyl a durable fire retardant vinyl, treated Vacuum regularly and steam or dry 12000 x 2000 x 200mm covers have heavy duty zips and webbing against mildew and rot and is stabilised clean as required. A8-254 Mat - Vault - Men’s, handles. Supersoft mat foam core is against ultra violet rays. Carpeted mats 6000 x 3000 x 200mm polyurethane I.D.F. 70-90, density 15-18kg/ 1 have needle punched polyolefin fibre carpet A8-258 Mat - Vault - Women’s, m3. Soft landing mat foam core is adhered to a foam base. Various types can 6000 x 3000 x 200mm polyurethane I.D.F. 185-350, density Mat - Landing, Carpeted be grouped according to the intended use. A8-259 Mat - Uneven Bars, 29-31kg/m3 Designed for competition and for areas Landing Mats 1 to 3 where the mats are permanently in place 14000 x 2000 x 200mm General Purpose Mats 9 to 13 These are vinyl covered or carpeted. Foam and cut around equipment. A8-260 Mat - Beam, Used for general exercises, kindergym and core consists of a top layer of Acrolite 18000 x 6000 x 200mm gym fun activities, tumbling, aerobics or A x B C C C 30mm or 20mm thick on high density A8-363 Parallel Bar Fill In Mat - judo and wrestling training. General Size (mm) 100mm 120mm 200mm polyurethane foam I.D.F. 300-350, density Carpeted, 200mm Thick purpose mats have vinyl covers and a core 30kg/m3. The 200mm thick mats have a 3000 x 2000 A8-169 A8-171 A8-172 Suits carpeted mat system. of reconstituted polyurethane of 100kg/m3 layer of shock absorbing foam on the Size: 2400 x 850 x 200mm. density or Acrolite 30kg/m3. Acrolite mats 2000 x 2000 A8-300 A8-342 A8-360 underside. ACROMAT has a range of F.I.G. A8-343 Parallel Bar Fill In Mat - are one third the weight, are light to mats and 120mm and 100mm thick mats. 3000 x 1000 - A8-340 A8-364 Carpeted, 120mm Thick handle and offer similar impact protection. Suits carpeted mat system. 2000 x 1000 - A8-341 A8-365 The weight of the heavier mats reduces Size: 2400 x 850 x 120mm. 20 MATS - LANDING, SUPERSOFT, HARD-SOFT, SOFT LANDING A8

5

2

4

3 6 7

Cover Mats 3 Used to join carpeted landing mats and in high traffic areas. Carpet sewn to soft vinyl A8-130 Mat - Landing, Folding, with intergral strips of touch tape to attach 3600 x 2000 x 100mm to landing mats. Mats fold to allow larger areas without A8-380 Mat - cover carpeted, joins. Easy to move and store. Used as a 3.2m x 2m landing area for vault or beam. 8 A8-381 Mat - cover carpeted, A8-133 Mat - Landing, Folding, 6m x 2m 4900 x 2000 x 100mm A8-383 Mat - cover carpeted, Fits neatly under A1-1 Balance beam. 8m x 2m A8-384 Mat - cover carpeted, A8-131 Mat - Landing, Folding, 8.5m x 2m 5400 x 2000 x 100mm 5 A8-244 Mat - Soft Landing, 2 4 3000 x 2000 x 200mm A8-64 Mat - Hard-Soft, Similar to A8-243 but thicker for a softer A8-49 Mat - Supersoft, Mat - Landing, Vinyl Covered 3660 x 1830 x 300mm landing surface. To be used on top of 3660 x 1830 x 450mm Used where mats have to be moved or This dual purpose mat is useful in any landing mats. stored regularly. One side is covered in breather fabric, vinyl gymnasium. Supersoft mat on one side coated mesh, to allow mat to expel air plus a 30mm Acrolite foam layer on the 7 A x B C C C when impact occurs. Used for gymnastics other side to give a firmer surface for Size (mm) 100mm 120mm 200mm training. landing training. A8-168 Mat - Coaches Helper, 3000 x 2000 A8-180 A8-149 3000 x 2000 x 50mm A8-48 Mat - Supersoft, A8-65 Mat - Hard-Soft, JEO JEO Designed to be used on top of landing 3660 x 1830 x 610mm 3660 x 1830 x 200mm A8-142 A8-134 A8-137 mats or floorstrips. Soften the impact for Used for gymnastics training. Similar in construction to A8-64 mats. JSO JSO JSO high repetition landing training. For A8-25 Mat - Supersoft, Designed to be used on top of landing competitions as allowed by F.I.G. 2000 x 2000 A8-143 A8-136 A8-138 3660 x 1830 x 305mm mats. Useful for high repetition landing regulations. JSO JSO JSO Used for gymnastics training or for school training for gymnastics or judo. and recreation activities where a soft 8 3000 x 1000 A8-144 A8-135 A8-147 6 JSO JSO JSO landing area is required. A8-245 Mat - Soft, Canvas, A8-243 Mat - Soft Landing, 2000 x 1000 A8-145 A8-148 A8-26 Mat - Supersoft, 2000 x 1000 x 100mm 4000 x 2000 x 100mm JSO JSO - 1830 x 1830 x 305mm Used on top of landing mats or floorstrips. For where a smaller soft landing area Designed to be used on top of landing Softens the impact for high repetition JAS - joining all sides JEO - joining ends only is required. mats for training or competition as allowed landing training. Canvas cover provides a JSO - joining sides only by F.I.G. regulations. Touch tape on soft non-slip surface. A8-51 Mat - Supersoft, underside helps prevent mat from moving. 2750 x 1370 x 305mm For recreation gymnastics and kindergym A8-173 Mat - Soft Landing, activities or where a smaller soft landing 3000 x 2000 x 100mm area is required. Same construction as A8-243. To be used on top of landing mats.

21 A8 MATS - GENERAL PURPOSE, STRETCHING, POOL, MARTIAL ARTS, WRESTLING

11

10 13

9 12

14

15

9 A8-410 Mat - General Purpose, 13 15 Acrolite, 2000 x 1000 x 40mm A8-6 Mat - General Purpose JAS, Light and easy to handle for general A8-401 Mat - Pool, 1000 x 500 x 30mm A8-178 Wrestling area 12m x 12m x 1830 x 1140 x 50mm recreation use, gym fun and kindergym or This poolside exercise mat is suitable for 40mm includes competition markings For general recreation use, aerobics and aerobics and stretching exercises. use in the water to assist children with Acrolite shock absorbing foam has touch stretching exercises. Touch tape 50mm flotation. Acrolite closed cell foam covered tape around the edges to hold the vinyl wide allows mats to be joined together. 11 with breather fabric. cover in place. Painted markings for The weight of this mat helps reduce competition wrestling are included. A8-406 Mat - Pool, 2000 x 1000 x 30mm movement during use. A8-21 Mat - Individual, 1220 x 610 x 20mm Similar to A8-401. Used for adults and A8-174 Wrestling area 10m x 10m x A8-415 Mat - General Purpose JAS, Used for stretching exercises. children. 40mm Acrolite, 2000 x 1000 x 40mm Soft vinyl cover. A8-176 Wrestling area 8m x 8m x Light and easy to handle for general 14 40mm recreation use, aerobics. Touch tape 50mm A8-11 Mat - Individual, Acrolite, A8-210 Mat - Judo, Red, wide allows mats to be joined together. 1220 x 610 x 30mm Same as A8-21 only thicker and 2000 x 1000 x 40mm 10 stronger vinyl cover. Textured vinyl cover is adhered to shock absorbing foam. Used for competition and A8-18 Mat - General Purpose, 12 training for judo or martial arts activities. 1830 x 915 x 50mm A8-211 Mat - Judo, Green, 2000 x 1000 For general recreation use, aerobics and A8-287 Mat - Stretching, x 40mm stretching exercises. Used where mats do 2000 x 1000 x 40mm Similar to A8-210. not need to be joined together. Low cost mat. Acrolite foam with embossed surface and radiused corners. A8-214 Floor Area - Judo, A8-20 Mat - General Purpose, 16000 x 16000 x 40mm 1830 x 1140 x 50mm A8-286 Mat - Stretching, Competition floor area consisting of Same as A8-18 but wider. 2000 x 1000 x 20mm Low cost mat. Acrolite foam with green mats A8-211 Qty 110 and red mats embossed surface and radiused corners. A8-210 Qty 18. A8-288 Mat - Stretching, 2000 x 1000 x 30mm 22 MAT TROLLEYS, PADDING BLOCKS A8

16 17 18

20

22

19

21 23

16 18 21 Mats Safety Tips > Mats and protective equipment are not A8-31 Mat Trolley - Castor Wheels, A8-35 Mat Trolley For 2 x A8-25 A8-223 Padding Block - Red, the complete answer to eliminating or 1800 x 1200mm Super Softs, 4000 x 800 x 1400mm 900 x 600 x 300mm reducing injuries. It is more important that For handling and storing mats indoors. Plywood top 20mm fixed to a steel frame. Similar to A8-221. Used to mount beams or falls be prevented rather than to assume Plywood top, 10mm thick, is fixed to 25 NB Polyurethane caster wheels and straps to bars as well as fun and training activities. that mats will make the fall safe. pipe frame. Rubber wheels - 100mmD. hold mats. > Additional mats cannot safeguard against 22 Castors with ball bearing swivels at careless progression or escalated learning handle end. Maximum load 180kg on 19 A8-222 Padding Block - Yellow, at the expense of control and ability. hard surface. A8-221 Padding Block - Red, 900 x 600 x 150mm > Landing on the head or landing in an out- A8-33 Mat Trolley - Castor Wheels, 1800 x 1200 x 450mm Similar to A8-221. Used for stretching of-contol position can result in serious 2400 x 1200mm Used extensively for special training exercises, special training purposes and injuries regardless of extra mats. For larger mats. Similar design to A8-31. purposes, padding platforms and lots of fun gym fun activities. > Some good common sense and logic activities. Brightly coloured fire retardant needs to be exercised in determining the 17 vinyl sides with handles, breather fabric 23 size and number of mats needed for a top and bottom. Foam core of high density particular activity. A8-32 Mat Trolley - 200mmD Wheels, A8-428 Mat - Interlock, polyurethane foam 31kg/m3. > It would be most difficult to establish 1800 x 1200mm 1890 x 900 x 30mm absolute mat requirements for every Used for handling and storing mats, outdoor 20 A8-427 Mat - Interlock, situation. and indoor use. Plywood top, 10mm thick, is 1890 x 900 x 40mm > In a gymnasium, mats should never be fixed to 25 NB pipe frame. Rubber tyred A8-220 Padding Block - Yellow, idle. There is always a place for A8-425 Mat - Interlock, Carpet wheels - 200mmD. Handle and swing axle 1200 x 900 x 450mm additional mats. Covered, 1890 x 900 x 30mm at front, fixed wheels at rear. Maximum Similar to A8-221. Used extensively > Mats are not fail-safe. There is no load 180kg on hard surface. for special training purposes, padding A8-426 Mat - Interlock, Carpet substitute for proper instruction, spotting platforms and lots of fun activities. Covered, 1890 x 900 x 40mm and good common sense in the teaching of gymnastics.

23 A8 FLOOR AREAS & FLOOR STRIPS, SPRING FLOORS

23 23

23

25a

25b

24 25

Floor Areas and Floor Strips 23 A8-237 Floor Area Underlay - Olympic, 25 14000 x 14000 x 30mm General Specification A8-606 Floor - Spring GZ1 F.I.G. Acrolite foam with integrated touch tape A8-100 Floor Strip, Carpeted, Used for all tumbling activities or in a multi- Approved, 14000 x 14000mm x 200mm joining system. 14000 x 2000 x 30mm Timber Panels 2400mm x 1200mm x 17 purpose area for kindergym, aerobics, Carpeted Acrolite foam used for tumbling + channels and corner connectors. A8-233 Floor Area Underlay, general exercise, and martial arts. and aerobics or as a general activities area Each panel has 32 parallel steel springs 14000 x 14000 x 30mm for kindergym and recreation gymnastics. The Acrolite foam has excellent rebound 46mm Diam and 110mm high. Acrolite foam without touch tape. characteristics. Acrolite base of closed cell Top consists of 60mm Acrolite close cell A8-562 Floor Area Tappered Surround, A8-127 Floor Strip, Carpeted, resilient foam is covered with needle foam with integrated top carpet layer. 14000 x 14000 x 900mm 13000 x 2000 x 30mm punched polyolefin fibre carpet. An A8-103 Junior Floor Strip - Carpeted, additional Acrolite underlay can be added A8-565 Floor - Olympic, 24 to improve performance. 14000 x 14000mm Resillient Foam Block 6500 x 2000 x 30mm Complete international floor. A8-106, A8-567 Floor - Club, 13000 x 13000mm Care of Floorstrips 25a A8-237, A8-562, A8-571, A8-125, A8-561 Complete club floor, similar to A8-566 but Mats must be rolled up with the carpet on A8-125 Touch Tape, White, smaller floor area A8-128 and smaller the outside of the roll. This prevents A8-566 Floor - Competition, 4 @ 12000 x 50mm tapered surround. creases forming in the carpet and allows 14000 x 14000mm Resillient Foam Block Defines the performance area. the carpet to be flat when used. Complete competition floor similar to A8-563 Floor Area Tapered Surround, 25b A8-565 but floor area A8-101 with touch 13000 x 13000 x 500mm Tumbling Runs A8-118 Touch Tape, Blue, tape on top of carpet. For spring floor A8-571. Floor components may be ordered 14000 x 100mm separately to make up the required area. A8-106 Floor area carpeted with A8-235 Floor Area Underlay, For joining floor strips together to form a continuous carpeted mat. integrated touch tape14000 x 14000 x 13000 x 13000 x 30mm Spring Floors 35mm Used with carpeted floor areas and underlay 26 to make up high performance tumbling A8-561 Floor area skirting 4 lengths areas. Resilient foam blocks are fixed under 14000 x 1000 with integrated touch tape A8-46 Floor Strip Trolley the timber panels. Joining strips and For transporting rolled mats. connectors hold the floor sections together. Two trolleys with 100mm D wheels with cross bar.

24 SPRING FLOORS, RHYTHMIC & AEROBIC FLOORS A8

28d 28b 28c 28a 28e

28c

28

29a

29b

26 29

27 30

27 28b 29 Aerobic Floors A8-573 Spring Floor Joining Strip, A8-310 Floor - Rhythmic, Spring 1060mm A8-122 Floor Strip - Rhythmic, 30 Timber Floor and Carpet, Olympic/ ‘H’ section supports the joints between the 14000 x 2000 x 10mm A8-532 Aerobic Floor - Competition, F.I.G. Specification short side of floor sections. Acrolite base 10mm thick lightweight 15000 x 16000mm tape border defines resilient foam and reinforcing layer covered 12100mm x 11600mm the performance area. 27 28c with beige coloured needle punched Timber panels with resilient foam A8-574 Spring Floor Joining Strip, polyolefin fibre carpet. blocks and touch tape interlocking A8-568 Floor - Rhythmic, 2250mm system. Top surface consists of 14000 x 14000 x 10mm ‘H’ section supports the joints between the 29a interlocking laminate parquet flooring Floor consisting of: Floor strips A8-122, long sides of floor sections. A8-570 Touch Tape, White, panels and provides an ideal surface touch tape and touch tape border. 4 @ 13000 x 50mm for aerobics. Floor marking tape, 50mm 28d Defines the performance area. wide, defines the competition area. 28 A8-575 Spring Floor Section Corner Connector 29b A8-571 Spring Floor - Resilient Foam A8-124 Touch Tape, Beige, Block, 12000 x 12000mm 28e 14000 x 100mm Floor sections, floor joining strips, floor A8-576 Spring Floor Section Connector Used for joining R.G floor strips together to corner connector and floor edge connector. A8-577 Spring Floor Section Resilient make a continuous carpeted area. 28a Foam Base - Conversion Kit A8-572 Spring Floor Section Resilient foam blocks used to convert - Resilient Foam Block, 2400 x 1200mm existing spring floor sections Timber panel with foam blocks and holes 2400 x 1200mm to foam base system. drilled for corner connectors. Joining strips Adhesive for fitting foam blocks is included. A8-573 or A8-574 and connectors A8-575 or Joining strips and connectors ordered A8-576 ordered separately. separately. A8-599 Spring Floor Anchor System Fitted to the 4 corners of the spring floor. Set contains 4 cables, turnbuckles and floor brackets. Order fasteners separately. 25 A9 PARALLEL BARS

1a 1d

1e

1c

1b 1f

1

General Specifications A9-115 Parallel Bars - Olympic/F.I.G. A9-15 Parallel Bar Rail - Superwood 1d Men’s parallel bars all have the Olympic Approved - Fibreglass Rails - Replacement A9-79 Parallel Bar Rail Pad F.I.G. specification rail profile. There are Similar to A9-86, but with heavier Conforms to F.I.G. dimensions and - 900mm Long different models for Olympic standard, wider base. specifications. Beech veneers glued under High density foam with vinyl cover and training and recreational activities. extreme pressure and temperature. touch tape joining. A9-85 Parallel Bars - Olympic - Length: 3500mm. Size: 51 x 41mm. Size: 90 O.D x 50 I.D x 900mm long. Safety Superwood Rails Check bars, height and width adjusting Same as A9-86 but with superwood A9-14 Parallel Bar Rail - Steel / Oak 1e system and all fittings regularly. Ensure they rails A9-15. - Replacement A9-80 Parallel Bar Upright Pad are in good condition and safe to use. Australian Oak with a 22mm D high tensile - 900mm Long A9-84 Parallel Bars - Junior Olympic steel core. Conforms to F.I.G. dimensions. High density foam with vinyl cover and Superwood Rails Length: 3500mm. Size: 51 x 41mm. touch tape joining to suit A9-86 Parallel 1 For school and recreation use. Rails A9-14. Bars only. Height and width adjustment system is the 1b A9-86 Parallel Bars - Olympic, Size: 90 O.D x 75 I.D x 900mm long. same as A9-86 but with lighter base and X6-14 Foot - Rubber, Fibreglass Rails uprights. Rectangular - Replacement 1f Rails A9-11, fibreglass with timber veneer Width adjustment: 365 - 615mm. Non-marking rubber. A9-9 Parallel Bar Transporter for improved grip. ACROMAT cam operated Height adjustment: 1120 - 1800mm from Size: 80 x 40mm. Steel frame with safety catch, fits onto lever clamps uprights to allow width and floor. Rail length: 3500mm. parallel bar base. Rubber wheels 160mm D. height adjustment. Uprights are powder 1c Fits A9-115, 84, 85, 86. coated heavyweight pipe, inner uprights are 1a A9-12 Parallel Bar Fill In Mat - chromed 35D solid steel with offset at top A9-11 Parallel Bar Rail - Fibreglass Carpeted, 80mm Thick for adjustment. Base made from 80x40 RHS - Replacement Carpet covered Acrolite foam. Fills in base is splayed and weighted for stability. Base Conforms to F.I.G. dimensions and area of parallel bars and covers RHS base. has keyholes for transporters A9-9. Rubber specifications. Fibreglass core with Fits A9-84, 85, 86. feet X6-14 protect the floor. timber veneer. Size: 3440 x 670 x 80mm. Width adjustment: 410mm - 660mm. Length: 3500mm. Size: 51 x 41mm Height adjustment: 1520mm - 2150mm from floor, 50mm increments. Rail length: 3500mm.

26 PARALLEL BARS A9

2a

2

4a 3

4 4b

5

2 3 4 5

A9-7 Parallel Bars - Club Model A9-160 Parallel Bars - Gym Fun A9-8 Parallel Bars - Low Balancing A9-33 Parallettes - Oak - Superwood Rails - Folding Ideal for balance training. Steel base with For hand balancing practice. Designed for recreation and gymfun use. Designed for kindergym and primary school pivoting uprights for width adjustment and Size: 35mm D. Rails, A9-18 are superwood. RHS base activities. Bars are 34mm D for easy grip for storage. Rails A9-19. and square uprights with height small children. Steel base with pivoting Height: 400mm. Length: 1800mm adjustment pin X4-40 and rubber knob uprights for width adjustment and storage. 4a X6-1 screw clamping. Rubber feet X6-14 Width: 500mm maximum. A9-19 Rail - Oak - Replacement protect the floor. Height: 750mm. Length: 1800mm. Australian Oak timber Width adjustment: 405 - 660mm. Length: 1800mm. Size: 45mm D. Height adjustment: 940 - 1750mm from floor, 100mm increments. 4b Rail length: 2750mm X6-11 Foot - Rubber, Tubular - Replacement 2a Non-marking rubber. A9-18 Parallel Bar Rail - Superwood Size: 100mm long x 46mm I.D. - Replacement Elliptical shape made from superwood. Length: 2750mm. Size: 48 x 41mm

27 A9 UNEVEN BARS

Uneven Bars A9-130

Gas Strut Height Adjuster

6 Tensioner

Uneven Bars A9-120 6a 6b

Fixed Rail

6c

Removable 6 6d Rail

General Specifications 6 A9-120 Uneven Bars - Acromat System 6a The uneven bars are unique. The ACROMAT - Olympic/F.I.G. Approved A9-113 Uneven Bar Rails - Fibreglass SYSTEM provides an accurate measurement A9-130 Uneven Bars - Acromat System Rails A9-113 fibreglass, are fixed to the - Olympic/F.I.G. - Replacement of the distances between the rails - Olympic/F.I.G. Approved uprights with bolts. Height and width of rails Fibreglass section with thin timber veneer regardless of the height or width New position width adjuster, easy to are adjustable without changing cables. bonded to the surface. Fabricated steel end adjustment. This system is available in both operate. Adjust height by releasing load on tension fittings with hole, are riveted to the free-standing and wall hinged models. Rails A9-113 Fibreglass rails. indicator A9-119 fitted to cables and fibreglass. Height and width of rails are adjustable releasing spring-loaded pins. Width Length: 2400mm. Size: 40mm D. Olympic/F.I.G. specification rail profile is without changing cables. adjustment is controlled by ACROMAT available in either fibreglass or superwood. A9-13 Uneven Bar Rail - Fibreglass Easy height adjustment, gas strut assisted. patented slide system between rails. This - Replacement Installation Plastic coated cables connect to top of outer incorporates a measure device. Steel bases Similar to A9-113 but end fittings with pin to ACROMAT provides a comprehensive upright. with transport wheels have supports pivots suit A9-121. installation service. Height adjustment: Low bar 1500 - 1800mm for chromed tubular uprights. Plastic coated Please provide drawings or details High bar 2350 - 2600mm. cables connect to top of outer uprights. Floor A9-54 Uneven Bar Rail - Superwood of the building: Width adjustment: 1300 - 2300mm. plates must be ordered separately. - Replacement a. Plan Height adjustment: Low bar 1600 - 1850mm Conforms to F.I.G. dimensions. Thin European b. Elevation High bar 2400 - 2650mm. Beech veneers are laminated under extreme c. Section of wall and floor Width adjustment: 1070 - 1870mm. heat and pressure to produce superwood. ACROMAT engineers will design all fixing to Safety galvanised steel cable inserted into A9-121 Uneven Bars - Acromat System suit the building. the timber rail fitted with steel end fittings. - Fibreglass Rails Safety Same as A9-120 but cable system has 6b Check bars, height adjusting system, cables, webbing cable tensioners and rails A9-13 A9-103 Uneven Bar Width Adjuster - pulleys, cable tensioners and all fittings are removable. Acromat System - Replacement regularly to make sure they are in good Width adjustments to F.I.G. dimensions. A9-122 Uneven Bars - Acromat System condition and safe to use. - Superwood Rails 6c Same as A9-121 but superwood rails A9-54. A9-110 Uneven Bar Cable, Pulley and Chain - Replacement Four required for A9-121. Plastic coated cable. 28 UNEVEN BARS A9

7b

7a

7c

7 7 Stored

9

8

6d 7 7c 8 A9-119 Uneven Bar Tensioner/Indicator A9-107 Uneven Bar Webbing Cable Unique ACROMAT system. Increase or A9-123 Uneven Bars - Wall Hinged - Tensioner - Replacement A9-128 Uneven Bar Single Rail decrease tension on the cables by rotating Fibreglass Rails Slide tensioner made from heavy webbing. Conversion Kit for A9-120 / A9-130 the handle. Scale indicates the load on Same height and width adjusting system as Allows the low bar to be removed for single A9-112 Uneven Bar Cable Padding - the cable. A9-121 but with one side hinged from a bar training. Set of 4 WARNING - not to be used with cable and wall. Wall bracket supplied for storage Carpeted padding wraps around the cables. pulley systems made before January 2001. against the wall. Ideal system to save 9 space. Set up can be completed quickly and Touch tape fastening. A9-116 Uneven Bar Tensioner/ A9-150 Cable space saving system easily with one person. Floor plates A6-1 are Indicators, with Cables, Pulleys and Includes padding for uneven bars, included. Chains - Conversion Kit high bars and rings. Includes the complete set of two tensioner/ A9-36 Uneven Bars - Wall Hinged - indicators A9-119 and four cables, pulleys Superwood Rails and chains. Similar to A9-123 but with superwood rails. Used to upgrade existing uneven bar system to include the tensioner/indicator. 7a A9-124 Uneven Bars Wall Hinged Steelwork Used to convert free-standing uneven bars to wall hinged. 7b A9-78 Uneven Bar Rail Pad - 400mm High density foam with vinyl cover and touch tape joining. Size: 90 O.D x 50 I.D x 400mm long.

29 A10 RINGS

3 2

2a

1 4

General Specifications 1 2 3 The timber rings used by ACROMAT conform to Olympic F.I.G. Specifications. These A10-9 Ring Canopy - Olympic/F.I.G. A10-36 Rings, Cables and Swivels - A10-2 Rings - Adjustable Straps, superwood rings are made from veneers of Approved Olympic/F.I.G. Approved Superwood rings Cables and Swivels European Beech laminated under extreme Lightweight 65mm square tube sections A10-7 are sewn into heavy webbing straps Useful as a teaching aid. Rings, cables pressure and temperature. slide together without any bolts required. with a triangle link at top. Galvanised cables and swivels same as A10-1. Made in seven sections for easy storage, 5mm D. attach rings to swivels X4-93 to Order fixing brackets separately. Installation handling and transport. Individual cables can allow rotation during use. Adjustment: 500mm When ordering fixed or hoistaway rings, be adjusted to level rings. Galvanised steel Strap length: 700mm. please provide details of building where cables 5mm D with pulleys, 12mm Overall length: 3000mm. 4 fixings occur. turnbuckles and chains have additional 2a A10-48 Trapeze Bar - Adjustable Straps a. Floor plan heavy webbing slides for tensioning. A10-7 Ring Timber - Olympic/F.I.G. Fabricated steel end fittings riveted to b. Internal elevations Rings A10-36. Approved - Replacement timber bar. Webbing straps are sewn to c. Sections of wall and ceiling F.I.G. hanging height: 5800mm from floor. Size: 180mm I.D. x 28mm D cross section. fittings and terminate in triangle link. d. Structural steel drawings Height adjustment: 5500 - 5950mm A10-1 Rings - Fixed Straps, Order cables and hooks separately. ACROMAT’s trained engineers will design from floor. Cables and Swivels Size: 610mm long x 35mm D. and supply all fixings required for the Floor plate spacing: 5500 x 4000mm Similar to A10-36 but supplied with swivel Adjustment: 500mm. installation. Floor Plates ordered separately. safety hooks A10-14. For hanging heights A10-10 Trapeze Bar - Fixed Straps Safety other than 5800mm please advise Similar to A10-48 but fixed straps. Check rings and straps, cables, height ACROMAT so that cable length may be 5 adjusting systems and all fittings regularly adjusted. Order fixing brackets separately. to ensure they are in good condition and safe to use.

30 RINGS A10

6a 7 6

5

5 6 7

A10-13 Trapeze Bar - for Rings A10-5 Rings - Hoistaway, Double Set A10-45 Cross Machine Bar with plastic coated hooks for Rings A10-7 sewn to webbing straps with Designed to allow progressive strength attaching to rings. swivel link, are connected to 5mm D cables. training for ring exercises. Size: 610mm long x 35mm D. The cables pass over nylon pulleys fixed to structure of the building and down the side wall to wall fixing plate. Rings with a sandbag counterweight are hoisted to ceiling when not in use. Height adjustment: 1100 - 2900mm above floor. A10-4 Rings - Hoistaway, Single Set Same system as A10-5 but only one set. 6a A10-29 Counterweight for Rings -Hoistaway - Replacement Attaches to ring cables before hoisting away. Vinyl sandbag.

31 A12 MINI, POWER MINI & DOUBLE MINI TRAMPOLINES

1a 2b 1c 2a

1d 1e 1f

1g 1b

1 2

3a

3b

3

General Specifications Foam core 10mm high density closed cell 1f 2b Trampolines are used for competition, the foam is covered with fire retardant vinyl. X5-3 Mini Trampoline Height Adjusting A12-122 Power Mini Trampoline Safety development of skills and techniques as Bed, 470 x 470mm with clips for 28 springs. Leg Spring - Replacement Pads - Replacement well as for recreation or fun activities. For adjustable or fixed leg. Length: 75mm. High density closed cell Acrolite foam 15mm A12-174 Mini Trampoline Safety Bed Safety pads are provided with mini, power think covered with fire retardant vinyl (32 Spring) - Replacement 1g mini and double mini trampolines. Frames As for A12-172 but bed is 380 x 380mm A12-26 Spring - Small - Replacement and legs are made of steel to withstand 3 with 32 springs. Galvanised 3mm super spring wire with harsh treatment. Non-marking rubber feet tapered ends. Length: 210mm. A12-10 Double Mini Trampoline are fitted to protect the floor. 1b Used on mini, double mini, power mini and with Wheels A12-175 Foot - Rubber - Replacement tumbling trampolines. Conforms to F.I.T. dimensions and 1 Moulded non-marking rubber foot. specifications. Easy folding and unfolding - Two bolts for fixing included. A12-170 Mini Trampolines with 2 lightweight. Wheels included. Top side Safety Bed 1c frames, 65 x 35mm RHS- no end frames. A12-120 Power Mini Trampoline Removable front leg reduces mounting A12-81 Mini Trampoline Adjustable Sheet bed A12-49, polypropylene with zone High performance mini trampoline. height for small children. Height adjustable Leg Set - Replacement markings. Safety pads A12-43. Approach and landing net have no frame back leg. Folds flat for storage - lightweight. Consists of inner and outer tube, height Springs A12-26, Qty 88. and springs. Adjustable leg braces allow Top frame 1030 x 1030mm from 38mm D adjusting knob X1-200 and leg spring X5-3. Overall frame size: 3300 x 1650 x 750mm wide variation in height and angle of bed to tube. Legs from 32mm D tube. Safety bed high. 1d suit small children up to high performance A12-172 consists of pads permanently fixed X1-200 Mini Trampoline Height gymnastics training. Wheels away and folds 3a to the bed. Springs A12-26, Qty.28. Non- Adjusting Knob - Replacement flat for storage. Side frames 65 x 35mm A12-49 Double Mini Trampoline Bed - marking rubber feet A12-175. Knurled knob for height adjustable leg. RHS. Net A12-121. Safety pads A12-122. Replacement 1a 1e Springs A12- 26, Qty 34. Size:2850 x 920mm A12-172 Mini Trampoline Safety Bed Overall size: 1300 x 1250mm. A12-84 Mini Trampoline Height 3b (28 Spring) - Replacement Adjusting Tube - Replacement 2a A12-43 Double Mini Trampoline Safety Safety pads fixed to the bed to form one Inner tube only for height adjusting leg. A12-121 Power Mini Trampoline Net - Pads - Replacement piece. Eliminates the possibility of getting Replacement Acrolite foam, 15mm thick with fire feet caught between bed and pads. Size: 600 x 600mm retardant vinyl cover.

32 TUMBLING TRAMPOLINES A12

5a

5 5b

5c

4

General Specifications 4 5 5b High performance tumbling trampoline as A12-155 Tumbling Trampoline Wheels used at the Australian Institute of Sport. A12-140 Tumbling Trampoline - Fixed A12-150 Tumbling Trampoline - Four swivel castors fit to legs and screw Designed for repetition work for developing Top frames 50 x 50mm RHS with spring Folding down to allow the folded trampoline to and perfecting skills. lugs, supported by leg frames with non Similar to A12-140, but end frames be moved easily. marking rubber feet X6-13. fold for storage. Safety Warning Net A12-141, black polypropylene fabric, Net 5550 x 1400mm. 5c Trampolines are fun, but must be treated 9550 x 1400mm. Springs A12-26, Qty 160. A12-156 Tumbling Trampoline with respect, as there is a very high risk of Springs A12-26, Qty 264. Overall frame size: 6000 x 2200 x 650mm. Horizontal Bar injury. ACROMAT recommends that Safety pads A12-142, 30mm Acrolite Stored size: 3500 x 2250 x 800mm high. Used for a variety of training activities. trampolines should never be used without foam with vinyl cover permanently fixed Options: Bar, 34mm D is clamped to top frame the supervision of a qualified coach. to top frame. Wheels A12-155 fitted to legs. and is 100mm above the trampoline net. > The majority of accidents Overall frame size: 10000 x 2200 x 650mm. Adjustable legs A12-134 converts one have resulted from failure to provide Options : end to a slant tramp adequate supervision. - Adjustable legs A12-134 converts 5a > Selection of equipment must never be one end to a slant tramp. A12-134 Tumbling Trampoline considered as a substitute for proper - Horizontal bar A12-156 clamps on Adjustable Legs coaching and supervision. to top frame. Fittings clamp to the legs on one end to > People using trampolines must be made - Additional length made to order. aware of the risk of serious injury or lift the end frame up. death and of the rules that will help Height adjustment: 0 - 300mm minimise these risks. > Implement programmes that have good progression of safety skills and allow participants to acquire a wide variety of skills while having fun. Check safety pads, net, springs and frame regularly to make sure they are in good condition and safe to use. Repair or replace worn or damaged parts. 33 A12 TRAMPOLINES

6a 6b 6c

6

6d 6c

6 Stored

General Specifications > Implement programmes that have good A12-8 Trampoline - Competition - 6c ACROMAT trampolines are designed to progression of safety skills and allow Folding, with Sheet Bed, A12-18 Trampoline Woven Net - provide the very best performance. Frames participants to acquire a wide variety of 3660 x 1830mm Goliath, 4270 x 2130mm - Replacement are constructed of steel to survive the most skills while having fun. Similar to A12-5 but with sheet bed A12-20. Two string net, 6.3mm weave spacing. rugged use in schools, clubs or the back Check safety pads, net, springs and frame Safety pads A12-13 ordered separately. Made from polyester netting twine 44kg yard. Nets are made from UV stable regularly to make sure they are in good breaking strain. Twine is glued to the clips 6a materials. The use of safety pads on all condition and safe to use. Repair or replace to reduce wear at this point. Net is painted A12-12 Trampoline Safety Pads - trampolines is recommended. Pads cover worn or damaged parts. with white rubberised paint and red Goliath for A12-2 the frame and vinyl covers the springs. marking lines. Spring clips, Qty: 37 x 19. Core material of 38mm reconstituted foam, Safety pads must be ordered separately. 6 100kg/m3, covered in vinyl. A vinyl panel A12-19 Trampoline Woven Net - Safety Warning A12-2 Trampoline - Goliath - Folding, covers springs. Pads are fixed to frame with Competition, 3660 x 1830mm - Trampolines are fun, but must be treated with Woven Net ,4270 x 2130mm webbing straps. Replacement with respect, as there is a very high risk of Suitable for indoor use. Lightweight top Corner pads A12-100 ordered separately. Similar to A12-18. Spring clips, Qty: 31 x 15. injury. ACROMAT recommends that frame from 65mm x 35mm RHS with 32mm Suits frame size: 5315 x 3050mm. A12-21 Trampoline Woven Net - Little trampolines, as with other equipment, tube leg frames. Spring lugs welded to Net size: 4270 x 2130mm Giant, 3050 x 1520mm - Replacement should never be used without the frame. Complete with detachable carrying A12-13 Trampoline Safety Pads - Similar to A12-18. Spring clips, Qty: 21 x 11. supervision of a qualified coach. wheels fitted with 100mm D non-marking Competition for A12-8 > The majority of trampolining accidents swivel castors. Woven net A12-18. Springs 6d Similar to A12-12 but suits frame size: have resulted from failure to provide A12-25, Qty 112. Folded trampoline fits A12-25 Spring - Large 280mm - 4715 x 2720mm. Net size: 3660 x1830mm adequate supervision. through a 2030 x 760mm doorway. Safety Replacement Corner pads A12-100 ordered separately. > Selection of equipment must never be pads A12-12 ordered separately. Galvanised 3mm super spring wire considered as a substitute for proper 6b with tapered ends. Used on all large A12-5 Trampoline - Competition - coaching and supervision. A12-100 Trampoline Corner Safety Pads trampolines. Folding, with Woven Net, > People using trampolines must be made Fits on the corners to completely cover the 3660 x 1830mm 7 aware of the risk of serious injury or trampoline frame. Used with A12-12 or Similar to A12-2 but smaller. Woven net death and of the rules that will help A12-13 safety pads. A12-19. Springs A12-25, Qty 92. A12-65 Trampoline - Competition - minimise these risks. Safety pads A12-13 ordered separately. Rigid Frame, with Sheet Bed, 3660 x 1830mm

34 TRAMPOLINES A12

7a

7b

7

8a

8 9

For school, club or home use. Suitable for A12-22 Trampoline Sheet Bed - 8a 9 outdoors. Two end frame, two side frames Little Giant, 3050 x 1520mm - A12-14 Trampoline Safety Pads - and four legs of galvanised pipe which Replacement Little Giant, 30mm Acrolite Foam A12-3 Trampoline - Pit - Goliath, slide together without bolts. Spring lugs Similar to A12-20. Carpet Covered with Woven Net, 4270 x 2130mm and are provided. Sheet bed A12-20. Springs Spring clips Qty 21 x 11. 40mm Acrolite Carpet Covered Safety A12-28 Woven Net Paint - A12-25, Qty 92. Safety pads ordered Pads, A12-63 7b White, 2 litres separately. Frame from galvanised pipe with spring A12-33 Trampoline Safety Pads - All woven nets used outside should be lugs. Rests on firm flat surface around the A12-7 Trampoline - Competition - Rigid Competition Rigid Frame, painted annually with net paint to prevent pit. Ideal for backyard or disabled users. Frame, with Woven Net, 30mm Acrolite Foam Carpet Covered deterioration in ultra violet light and to ACROMAT can provide pit detail 3660 x 1830mm reduce wear. A12-34 Trampoline Safety Pads - dimensions. Woven net A12-18. For school, club or home use. Suitable for Goliath Rigid Frame, A12-32 Woven Net Paint - Springs A12-25, Qty 112. outdoors. Similar to A12-65 but with 40mm Acrolite Foam Carpet Covered Blue, 2 litres woven net A12-19. Springs A12-25, Qty 92. A12-6 Trampoline - Pit - Competition, Safety pads ordered separately. 8 A12-29 Woven Net Paint Thinners - with Woven Net, 3660 x 1830mm and 4 litres 30mm Acrolite Carpet Covered Safety A12-4 Trampoline - Goliath - A12-9 Trampoline - Little Giant - Used to clean up net paint. Pads, A12-40 Rigid Frame, with Woven Net, Rigid Frame, with Sheet Bed, Similar to A12-3 but smaller woven net, 4270 x 2130mm A12-181 Trampoline Spotters Mat, 2000 3050 x 1530mm 3660 x 1830. Springs A12-25, Qty 92. Similar to A12-65 but with woven net x 1000 x 100mm Similar to A12-65 but with smaller A12-18. Springs A12-25, Qty 112. Soft mat with foam core 130kg/m3. Vinyl A12-110 Trampoline - Pit - Little Giant, sheet bed. Suitable for kindergym or home Safety pads ordered separately. cover has webbing handles on one side for with Sheet Bed, 3050 x 1530mm and use. ease of handling. Safety Pads, A12-112 7a Springs A12-25, Qty 64. A12-20 Trampoline Sheet Bed - Safety pads A12-14 ordered separately. Trampoline Flyaway Frames Pit Trampolines - Open Ends Competion, 3660 x 1830mm - For additional safety, these frames are For specialist training facilities. A12-60 Trampoline - Little Giant - Replacement fitted to each end of the trampoline. Refer to pit information A22 section. Rigid Frame, with Woven Net, Tough polypropylene breather fabric Contact ACROMAT for more information. 3050 x 1530mm stabilised against ultra violet light for long Similar to A12-65 but with woven net. outdoor life. Spring clips Qty 31 x 15. Springs A12-25, Qty 64. Safety pads A12-14 ordered separately. 35 A13 POMMEL EQUIPMENT

1 1b

1c 2a 2

1d

1a

3

5a

5b

4a 4 5 6

General Specifications 1b 2 4 Olympic/F.I.G. vaulting and pommel horses A13-12 Pommels and Bolts - Olympic/ have two telescoping uprights. The two F.I.G. Approved A13-98 Buck - Pommel - Leather A13-72 Mushroom - Senior with Single Pommel For advanced double leg circle uprights are bolted to the base made from The pommels are superwood, mounted Designed for junior use and training. work on single pommel. Dished steel plate 80mm x 40mm R.H.S. Height adjustment on aluminium casting with slotted base. Single upright. Pommels may be ordered separately. Body size: 650mm long x 180mm top is padded with 20mm reconstituted system has a spring loaded locating pin Pommel handles A13-75 are fixed by a foam 100kg/m3 and covered in vinyl fabric. and a large locking T screw. All pommel T-handle and are designed to fit all high. Height adjustment: 650mm - 850mm. The top is supported on four tubular legs and vaulting horse bodies have provision ACROMAT steel horse bodies. 2a with one adjusting leg for stability. for holding down chains. For ease of X6-13 Rubber Foot - Replacement Attachment point for holding down chain 1c transport, lifting wheels can be fitted. Non-marking rubber foot. Size: 50 x 6mm provided. Removable pommel bolted to A13-23 Horse Chain, Turnbuckle centre of top. Size: 1200mm D x 650 high. and Floorplate 3 1 4a Hold down chain, 5mm zinc plated, A13-112 Horse - Pommel - Junior, A13-172 Mushroom - Senior, Floor A13-87 Horse - Pommel - Leather - 10mm turnbuckle and floorplate A6-1 Mounted with Pommel Olympic/F.I.G. Approved with lift up hook. Leather Base with two uprights. Long lasting Designed for training junior gymnasts. 5 A13-117 Horse Chain and leather cover is fitted to the fabricated Similar to A13-87 but smaller body, Turnbuckle Padding A13-71 Mushroom - Intermediate steel body padded with 20mm highly 1300mm long. Pommels A13-12. Pommels Carpeted Acrolite foam held in place width adjustment: 380 - 470mm. Height Ideal for learning double leg circles. Dished resilient foam. Pommels A13-12. steel plate top is padded with 20mm with touch tape. adjustment: 750 - 950mm from the floor. Pommel width adjustment: reconstituted foam 100kg/m3 and covered in 380mm to 470mm. 1d vinyl fabric. The top is supported on four Height adjustment: 1000mm - 1350mm A13-88 Wheels - Two Upright Horses tubular legs with one adjusting leg for from the floor, 50mm increments. Two 100mm D polyurethane tyre wheels stability. Attachment point for holding down can be bolted to standard A13-86, A13-87 chain provided. Size: 600mm D x 650 high. Wheels and hold down chain order separately. and A13-121 base in holes provided. By 5a 1a lifting the horse body the wheels drop under FC1-411 Rubber Foot 32 I.D. X6-14 Rubber Foot - Replacement gravity and are held in position by lowering 5b Non-marking rubber foot. Size: 80 x 40mm. the horse. A13-66 Mushroom - Intermediate Padding

36 VAULTING EQUIPMENT A13

7b

7a

12

10 7c 11

7

8

9

13

6 7a 10 12 A13-118 Vaulting Table Upright Padding A13-160 Buck Pommel Trainer, Carpeted Acrolite foam held in place with A13-109 Vault Safety Block ‘U’ Shape A13-149 Vaulting Table Base Pad Carpeted Covered Light Weight Foam, touch tape. For round off vaults the safety block Vinyl covered with touch tape to join area. 160 H x 500mm L provides an area around three sides of Size: 2000 L x 1200 W x 200mm H Designed for circle training. 7b the beatboard minimising the risk if the A13-147 Vault Table Height Indicator gymnast partly misses the beatboard. 13 A13-161 Buck Pommel Trainer, High density foam base with resilient top Similar to A13-160, 265mm H 7c A13-131 Foam Vaulting Table layer of Acrolite foam is covered in vinyl. A13-88 Vault Transport Wheels Table Variable heights: 3 sections, A13-162 Buck Pommel Trainer, Contrasting colour to beatboard. 500mm, 750mm, 1000mm and 1250mm. Similar to A13-160, 210mm H 8 Size: 1200 x 1150 x 200mm Vinyl covered with touch tape edging to join A13-165 Horse Legless Pommel Trainer, A13-108 Vault Run Up Strip - Olympic/ 11 section. Firm foam for good support. Carpeted Covered Light Weight Foam, F.I.G. - 25000 x 1000 x 20mm Base section fitted with touch tape to 270 H x 1600mm L Needle punch polyolefin fibre carpet is A13-120 Vault Mat - Anti Sting, reduce movement when used on carpeted Designed for circle training. glued to reconstituted foam base of 1200 x 1000 x 20mm surfaces. 150kg/m3 density. Reduces stress and Textured vinyl cover, contrasting colour 7 repetition injuries. to vault run. Touch tape on underside holds A13-121 Vaulting Table - F.I.G. mat in place during round off vaults. 9 Specifications Curved top is padded with highly resilient A13-74 Vault Run Up Strip foam and covered with non-slip synthetic 25000mm x 660 x 15mm fabric. Adjustable height uprights and base Similar to A13-108. Used for training. support the top. Base includes holes for Markings allow vaulting run to be anchoring and rubber feet X6-14 to measured. Markings are painted at every protect the floor. Table size: 1000mm - 1000mm and 0 to 2000mm and 20000mm 1400mm. to 25000mm marks at 200mm. Each metre Height adjustment: 1050 - 1450mm mark is numbered from 0 to 24. Wheels A13-88 and upright padding are optional and ordered separately. 37 A13 VAULTING BOXES

11a

12a

11b

11c

11d

13a

11 12 13

General Specifications 11 Vaulting Box - Foam - 13 Vaulting boxes, especially the foam Replacement Sections vaulting boxes, are used for a wide variety A13-129 Vaulting Box - Foam - A13-8 Vaulting Box - Timber - Code A B C D of training and gym fun activities in Gym Fun, 4 Section Type B, Senior kindergyms, schools and clubs. Four sections. Top section is in three parts 11a A13-130 300 400 400 540 Pyramid type with 40mm x 40mm x 3mm that can be removed individually for vault angle frame, clad with smooth splinter free 11b A13-91 300 1200 540 685 Foam vaulting boxes are high quality training and fun activities. 17mm water resistant melamine coated lightweight foam covered with fire Base: 965 x 1200mm. 11c A13-92 300 1200 685 825 plywood. Top is 40mm 100kg/m3 retardant vinyl. Full height vault is firm Top: 400 x 1200mm. 11d A13-93 300 1200 825 965 reconstituted foam with vinyl cover. enough to stand on. Individual sections are All sections are bolted together and are A13-128 Vaulting Box - Foam - useful for a wide variety of training and fun 12a A13-90 300 1200 400 540 fitted with safety catches. Gym Fun, 3 Section activities. Continuous touch tape holds Heights: 640, 830, 1020 and 1200mm Same as for A13-129 with top 3 sections sections firmly together. Webbing handles Top: 1240 x 450mm only. Height: 300, 600 and 900mm. 12 at each end make handling easy. All Base: 1200 x 1000mm sections may be ordered separately. Base: 825 x 1200mm. A13-29 Vaulting Box - Foam, 4 Section A13-28 Box - Vaulting - Timber Safety Similar to A13-129 but top section is Type A, Junior Check covers and all fittings regularly to one piece. Same construction as A13-8. ensure they are in good condition and safe Heights: 425, 620, 810, 1000mm. to use. Top: 1240 x 450mm C Base: 1200 x 900mm. 13a A A13-14 Wheels Fixed to Vaulting Box Two 50mm D nylon wheels are mounted on bracket which can be bolted to vaulting box D B A13-8 and 28.

38 WALL BARS A14

1b 1c 1a

1d

1

2

1e

1f

1 Stored

General Specifications A14-4 Wall Bars - Wall Hinged, Two 1c A14-8 Ladder - Attached to Wall Bars Used in schools and gym clubs for climbing Panel, 3600mm High x 2300mm Wide A14-53 Ladder - Attached to Cross Bar Webbing 50mm wide with timber rungs at activities for young children, general exercises Similar to as A14-5 but with 4 vertical stiles Ladder with 300mm rung spacing. 300mm centres. One end is fitted with or as part of circuit training for fitness. Wall per panel. safety hooks. At the other end the hooks are 1d bar stiles are made from 90mm x 40mm tied to ropes to suit width of wall bars. A14-6 Wall Bars - Wall Hinged, One A14-10 Horizontal Rope - hardwood. Rungs, 35mm D hardwood, are Panel, 3600mm High x 2300mm Wide Attached to Wall Bars fixed to each stile with CSK screws. All timber 2 Similar to A14-4 but one panel only. Climbing rope with clamp and large rubber has two coats of clear finish. covered shackles at each end is tensioned A14-43 Wall Bars - Fixed, 4 Section, A14-7 Wall Bars - Wall Hinged, One Installation between wall bar panels. 2480mm High x 3095mm Wide Panel, 3600mm High x 3000mm Wide When ordering, please provide details of Rungs at 150mm spacing. Top bracket is Similar to A14-5 but one panel only. 1e building where fixings occur. ACROMAT’s fixed to the wall and supports a top rung A14-9 Swedish Beam - trained engineers will design and supply all 1a chinning bar 95mm in front of the panel. The Attached to Wall Bars fixings required for the installation. A14-28 Wall Bar Cross Bar with bottom is fixed to the floor. For balancing or forming part of a circuit for Four Climbing Ropes Safety fitness training. Timber beam is bull nosed A14-2 Wall Bars - Fixed, 1 Section, The 50mm square steel R.H.S. is connected Check panels, cables and all fittings on one edge with two coats of clear finish. 2480mm High x 815mm Wide between adjacent panels. Four climbing regularly. Ensure they are in good condition End fittings allow beam to fit to any ropes A5-1 are attached on the cross bar A14-1 Wall Bars - Fixed, 2 Section, and safe to use. intersection of stile and rung. and can be moved to any position. 2480mm High x 1575mm Wide Beam size: 120 x 65mm 1 1b Length: to suit wall bar panel spacing. A14-42 Wall Bars - Fixed, 3 Section, A14-54 Rope, Knotted - Attached 2480mm High x 2030mm Wide A14-5 Wall Bars - Wall Hinged, Two 1f to Cross Bar Panel, 3600mm High x 3000mm Wide A14-11 Horizontal Ladder, Tubular - A14-44 Wall Bars - Fixed, 5 Section, Makes climbing easier for smaller children. Bottom hinge is fixed to floor and top hinge Attached to Wall Bars 2480mm High x 3910mm Wide A14-51 Rings - Attached to Cross Bar to wall. Top of panels are held by toggle Steel tubular ladder with hooks at each end, A14-45 Wall Bars - Fixed, 6 Section, Rings A10-2 with adjustable straps, cables tensioner system and cable fixed to the wall 710mm wide with 22mm diameter rungs at 2480mm High x 4670mm Wide leaving the floor area clear. Bottoms of the and swivels. 300mm spacing for easy grip for small stiles are fitted with non-marking A14-52 Trapeze - Attached to Cross Bar children. Length: 2400mm or made to suit polyurethane wheels. Padbolts locate in Trapeze with adjustable straps A10-48 and wall bar panel spacing. floor plates A6-7. Stored depth: 165mm cables. 39 A15 DIVIDING CURTAINS

1

Stored 1 3

2

General Specifications Side drawn on cable curtain - No beam 1 2 Curtains are used to divide sports hall into or roof structure required. Structural individual areas and act as a visual barrier fixing points on the walls or columns A15-28 Curtain - Vertical Lift, A15-62 Curtain - Vertical Lift, Opaque between groups increasing the versatility are necessary for fixing the cable. Opaque and Net Curtain panel: vinyl full height. of your centre. Draw cords may be required. Storage area Curtain panel: Similar fixings and lifting system as A15-28 at the wall is required when curtain is Vinyl - opaque blue, 2000mm high Winch options (ordered separately): similar Curtains are made to order and can be: drawn to the side. Net - White 50mm square, 4800mm high to A15-28 a. Solid panel (opaque) - vinyl, Lifting system: Brackets fixed to roof fire retardant. All net curtain - Used where a visual structure support the curtain, carrier track 3 b. Net - 50mm square x 1.4mm white barrier is not required. and pulley system. Lifting cords are A15-41 Curtain - Vertical Lift, all Net sports mesh, ultra violet stabilised. attached to bottom of the curtain. These Removable net - Economical alternative. Curtain panel: White, 50mm square net Options: Black mesh and 25mm cords are threaded up through the vinyl and Net is taken down and stored when with black vinyl edging on bottom. square mesh. mesh, over nylon pulleys and are fixed to not required. Designed for indoor or Similar fixings and lifting system as A15-28 c. Solid panel (opaque) and net - vinyl the carrier. A cable from the carrier to the outdoor use. Winch options (ordered separately): similar 2000mm high, double stitched to net. winch raises the curtain. A safety catch Protection net - Reduces the risk of to A15-28 Vertical lift curtain - Lifts up to clear the system stops the curtain dropping if the damage to ceilings, lights and windows. floor area. Must be fixed to the roof cable fails. structure or a beam. Installation Bracket spacing: 1500mm approx. Acromat’s trained engineers will design Stored depth: 600mm approx. Side drawn on track curtain - Requires and supply all fittings required for the Total weight (including all fittings): storage area at the wall when curtain is installation of the curtains or nets. 10kg/lineal metre drawn to the side. Must be fixed to the roof structure or a beam. Safety Winch options (ordered separately): Check tracks, ropes, cables, winches and a. manual winch A16-11 or A16-12 all fittings regularly. Ensure they are in b. manual winch A16-11 or A16-12 with good condition and safe to use. portable electric driver A16-13 c. electric winch, key operated A16-52 d. electric winch, cordless remote control A16-550

40 DIVIDING CURTAINS & NETS A15

5

4

7

6a

6

4 A15-31 Curtain on Cable - 6 7 Side Drawn, Opaque and Net A15-42 Curtain on Track - Curtain panels: A15-124 Dividing Net - Removable, A15-126 Dividing Net - Removable, Side Drawn, all Net Vinyl - opaque blue, 2000mm high 4800mm High 2400mm High Curtain panel: White, 50mm square with Net - White, 50mm square, 4800mm Net: White, 50mm square with black vinyl Net: White, 50mm square with black black vinyl edging all sides. high with vinyl edging. border, prestretched rope top and vinyl edging, prestretched rope top, Track system: similar to A15-29. Bi-parting panels overlap 300mm weighted bottom. weighted bottom and intermediate posts. Fixings to structural members each side Fixed to structural members each side of A15-29 Curtain on Track - in centre. of building and intermediate support building or free-standing posts in sockets. Side Drawn, Opaque and Net Cable system: 10mm D cable fixed to posts included. Winch A16-18 and storage box A16-148 Curtain panel: structural members each side of building. Winch A16-18 and storage box A16-148 ordered separately. Vinyl - opaque blue, 2000mm high Centre of cable is fixed to the roof. Rollers ordered separately. Floor sockets ordered separately. Net - White, 50mm square, at 600mm centres, have two cords, one 4800mm high with vinyl edging supports the net and one the vinyl panel. 6a Track system: Millstrut P1001 track is Draw cord running through pulleys controls A16-148 Storage Box with Wheels fixed to roof structure or special beam. the curtain from one side wall. A15-133 Dividing Net - Side Drawn, Rollers at 600mm centres with two cords, Brackets on wall retain the stored curtain. 4800mm High one supports the net and vinyl panel. 5 Net: White, 50mm square with black vinyl Brackets on the wall retain the stored border, weighted bottom. curtain. A15-131 Roof Nets Cable system: Fixed to structural members Total weight (including track and all Net: White, 50mm square with touch tape each side of building. Intermediate posts fittings): 11kg/lineal metre. joining system allows access to lights. support the cable. Shackles at 600mm Options: - Cables tensioned between structural centres fix net to the cable. To store, - Bi-parting panels overlap 300mm in members of the building support the net. remove intermediate posts and slide net the centre. to the side wall. - Draw cords to operate the curtain from Fixings allow cable to be removed one side wall. A spring loaded pulley if required. and jamming cleat keeps the rope taut. Winch A16-18 and storage box A16-148 - Winch options (ordered separately): ordered separately. similar to A15-28 41 A15 DIVIDING NETS

8 9 Stored

10 9

8 9 10

A15-113 Dividing Net - Removable, Cricket and Sports Nets - A15-128 Protection Nets - Fixed Outdoor, 2400mm High Special Purpose Nets Net: White, 50mm square with black vinyl Net: White, 50mm square with black vinyl Generally designed to suit the specific edging all sides. border, prestretched rope top and location, either indoor or outdoor use. Height: as required. weighted bottom. Construction similar to details for dividing Cables top and bottom are fixed to Support posts designed to suit local curtains. the building to hold nets permanently conditions and intermediate support posts in place. are all included. Finish: Posts - hot dip galvanised. Winch A16-18 and storage box A16-148 ordered separately.

42 GENERAL GYMNASIUM EQUIPMENT A15

13

15

14

12

11

21 16

17

18 22

20 19

Safety 16 19 20 Check all gymnasium equipment regularly to make sure it is in good condition and Palm Guards - Leather Wrist Straps - Set A15-67 Padding Box, safe to use. Leather palm guard, with two finger Straps made from 25mm wide heavy 1200mm x 900mm x 600mm holes, sewn to wrist strap with buckle. nylon webbing sewn to form loop. Flat firm surface ideal for padding. 11 Used to prevent the gymnast from losing Three usable heights. Lightweight Code Size grip when teaching giant swings on polystyrene foam 1200mm x 900mm A15-101 Chalk Stand - Olympic A15-80 Super Small horizontal bar. Select the correct size pair x 600mm with zip on cover made from Covered clear plastic bowl with hand holes. A15-81 Small of straps to suit each gymnast. fire retardant vinyl fabric. Supported by a single upright and base. Warning: Must be used under supervision A15-97 Padding Box A15-82 Medium of qualified coach. 12 with Acrolite Layer A15-83 Large Size Same as A15-67 but with an additional A15-79 Chalk Blocks - Carton, Code layer of resilient foam for softer outer 36 Packets Marking Circ. mm 17 surface. Contains 36 packets A15-78 A15-68 0000 530 21 13 A15-9 Palm Guards - Victor A15-69 000 555 Leather palm guard, with three finger A15-71 00 580 A15-66 Wobble Board A15-78 Chalk Blocks -Packet, 440g holes, sewn to wrist strap with buckle. Ideal for rehabilitation of ankle injuries. Magnesium Carbonate - 8 x 55g blocks. A15-72 0 605 18 Spring, 65mm high is fitted between 14 A15-73 1 630 19mm plywood boards. One board is A15-52 Palm Guards - Adrianov 400mm square and one 300mm D. Non- A15-74 11 655 A15-89 Chalk Powder - 20kg Provides extra grip on rings and marking rubber buffers protect the floor. Bulk chalk powder. horizontal bar. A15-75 111 680 22 15 A15-76 1111 705 A15-21 Medicine Ball - 2kg A15-70 SET OF 8 A15-84 Resin Gum - 1kg A15-22 Medicine Ball - 3kg Provides extra grip. A15-23 Medicine Ball - 4kg

43 A15 GENERAL GYMNASIUM EQUIPMENT

23a 24

23b

25 23 28

26 27

29

23 24 26 28

A15-107 Scoreboard - Gymnastic A15-135 Scoreboard - A15-140 Score Bench - 4 Person, A15-53 Jump & Reach Board Competition - Seven Numeral Electronic, 1200 x 700mm 2400mm long x 650 wide (Sergeant Jump) Three black numerals A15-19 for the Fully microprocessor controlled. Steel tube frame construction with Used for physical ability testing. Formed gymnast’s number and four for the score Control console and cable included. melamine panels. Lockable castor wheels. completely from galvanised steel sheet (one black and three red A15-20). Time: 4 red digits, 1-99 minutes selectable. metal with 900mm high sliding calibrated A15-139 Score Bench - 3 Person, Numerals are fixed to a plywood panel Scoring: Two teams, 3 red digits. front panel. Front panel raised to starting 1800mm long x 650 wide supported by a single upright and heavy Time out: 1 yellow digit. point. Magnet marks height of jump. A15-141 Score Bench - 5 Person, base. This allows the board to rotate for Team fouls: 1 green digit. 2850mm long x 650 wide viewing. Period and substitution: blue 29 A15-142 Score Bench - 6 Person, 23a A15-136 Scoreboard - 3400mm long x 650 wide A15-16 Pegboard - 900 x 900mm A15-19 Scoreboard Numerals 0-9 Electronic, 1500 x 1000mm Ideal for upper body strength work. - Black Similar A15-135 but larger. 27 Pegboard is fixed direct to the wall. The 190mm x 335mm plastic box has 10 Melamine coated 17mm plywood has A15-12 Horizontal Ladder - Wall Fixed numbers (0-9) 245mm high. 25 holes at 180mm centres fitted with steel The ladder is fixed 230mm from wall Change numbers by moving the levers on tube and flange. These support the 25mm A15-137 Shot Clock - and height above floor as requested. side of the box. Simple and easy to D plastic pegs A15-51 used when Electronic, 190mm Single Row LED Steel supporting frame is fixed on wall or operate - a host of uses for all games. climbing. Pegs: Qty 2. Set of two. structural member and is braced with 5mm 23b D galvanised steel cables and turnbuckles. A15-17 Pegboard - 1500 x 300mm A15-138 Shot Clock - Electronic, A15-20 Scoreboard Numerals 0-9 Ladder: 4800mm long x 455mm wide Mounted on the wall vertically. Supplied 200mm Double Row LED - Red Stiles - 120 x 50mm Australian Oak with 2 pegs. Pegs: Qty 2. Set of two. Rungs - 35mm D hardwood at 380mm A15-55 Pegboard - 1200 x 1200mm centres. Pegs: Qty 2. A15-45 Pegboard - 1800 x 1200mm Pegs: Qty 4.

44 GENERAL GYMNASIUM EQUIPMENT A15

30 30a

32

33

36 34 31

35

37

38

30 33 Floorplate A6-7 locate the post base. 35 Top is held by cable and turnbuckle fixed A15-10 Ballet Rail - Height A15-90 Boxing Ring - 6100 x 6100mm to a floor plate A6-1. A15-37 Punch Ball - Leather, Adjustable, Free Standing with Raised Platform Ropes: 5mm D galvanised steel covered - Floor to Ceiling Steel base with non-marking rubber feet. 7100 x 7100 x 900mm High with 20mm D flexible conduit. Inflatable leather covered ball with rubber Rail: 44mm D Australian Oak with clear Platform: Free standing base consisting of Corner pads: 20mm thick Acrolite foam tensioning cords top and bottom. Fixes finish. Length: 3000mm interlocking R.H.S. steel frames support covered with vinyl. onto wall frame A15-35 and floor plate. Height adjustment: 620mm to 1025mm 19mm plywood platform. Corner post slide Mat: 20mm thick Acrolite foam, white 36 30a into the base frame. 400g/m2 canvas cover. Tensioning system Ropes: 5mm D galvanised steel covered X6-11 Rubber Foot - Replacement fitted around the perimeter holds cover A15-34 Boxing Bag Wall Bracket with 20mm D flexible conduit. taught. Mat size: 1000mm wider than ring. Pipe frame 20 N.B. is hinged to wall 31 Corner pads: 20mm thick Acrolite foam and held in working position by ropes. covered with vinyl. A15-25 Boxing Ring, Posts, Mat, Support boxing bag 1525mm from wall. A15-7 Ballet Rail - Wall Fixed Mat: 20mm thick Acrolite foam, white Padding Complete, Floor Fixed, 4880 x 4880mm. Steel wall brackets support 44mm D 400g/m2. canvas cover. Tensioning system 37 Australian Oak timber rail with clear finish. fitted around the perimeter holds cover Similar to A15-24. 3000mm length or made to suit customers’ taught. A15-26 Boxing Ring, Posts, Mat, A15-36 Boxing Bag - Vinyl requirements Vinyl covered bag, 1200mm high, A15-91 Boxing Ring - 5490 x 5490mm Padding Complete, Floor Fixed, with straps and ring for fixing to 32 with Raised Platform 5490 x 5490mm. wall bracket A15-34. 6420 x 6420 x 900mm High A15-27 Boxing Ring, Posts, Mat, A15-11 Ballet Rail - Adjustable Similar to A15-90. Padding Complete, Floor Fixed, 38 Height, Wall Fixed A15-24 Boxing Ring, Posts, Mat, 6100 x 6100mm. Steel wall brackets with keyhole fitting A15-44 Speedball and Board - Padding Complete, Floor Fixed, supports 44mm D Australian Oak rail with 34 Wall Fixed, Adjustable Height 4270 x 4270mm. clear finish. Length: 3000mm or made to Steel frame mounted on wall, supports Suitable for training. Dismantles suit customes' requirements A15-35 Punch Ball Wall Bracket plywood board 900 x 900 x 19mm with for storage. Height adjustment: 150mm and Floorplate radius at front. Posts: 1360mm high, with staples and Same as A15-34 with A6-1 floor plate. Speedball: inflatable, leather covered, turnbuckle support main ring cables. with swivel. Height adjustment: 300mm. 45 A16 BASKETBALL BACKBOARDS

2

1 2 Stored

General Specifications Design Considerations Safety 2 Basketball backboards are supplied with a Selecting an appropriate backboard for Check cables, winches and all fittings and timber board A16-111 and ring A16-1 and your facility will often depend on the fixings regularly. Ensure they are in good A16-78 Basketball Backboard - can be fitted with glass backboard with building construction and available condition and safe to use. Mobile, Cantilever 2300mm snap-down ring and mini basketball height fixing points. Incorporates mini basketball height. adjusting frames. 1 Padded base and backboard frame. All Acromat basketball backboards are Floor anchors included. Glass backboards: International designed to comply to the Australian and A16-600 Basketball Backboard - Backboard: glass, armour plated A16-45. standard. Also used where the spectator International Basketball Federation (FIBA) International, Mobile, Cantilever 3250mm Ring: snap down A16-43. area is behind the backboard. Rules and the British and European International standard. Incorporates mini Operation: manual hydraulic pump. Armour plate glass 12mm thick mounted Standard BS EN1270: 1998. Live load basketball height. Low profile base for Base: Width - 1300mm. Length - 1650mm. in 50 x 50 x 5mm angle frame and held in requirements and the ‘snap-down’ loads minimum obstruction for spectators behind Distance from court to wall: 3500mm min. by 25 x 25mm steel section. High density for the rings are set out in the standards. backboard. Backboard frame, underside of Stored size: Width - 1860mm. closed cell foam channel isolates glass arms and the complete base are padded. Acromat provides a design service to Length - 3050mm. Height - 2100mm. from the frame. Heavy duty bottom frame As the backboard is raised, cams lower a wide determine the type of backboards to suit Weight: 800kg approx. 65 x 35mm steel tube supports the snap front rubber covered foot to the floor. This your building. Please supply the following down ring A16-43. Fixing is completely takes the load of the backboard off architectural drawings of the building. independent of the glass. the wheels to reduces movement during use. a. Floor plan Rear anchor points and floor fixings Timber backboards: International size, b. Internal elevations are included. 1800 x 1050mm, white with 50mm wide c. Sections of wall and ceiling Backboard: glass, armour plated A16-45. Ring: black international markings outside edge d. Structural steel drawings snap down A16-43. and shooting rectangle. Board is fixed to Installation Operation: Push button, electric 240volt a 38 x 38mm steel tube outer frame with ACROMAT’s trained engineers will design hydraulic pump. vertical centre member for fixing the and supply all fixings required for the Base: Width - 1320mm. Length - 2105mm. basketball ring A16-1. Basketball ring, installation of the backboards and provide Distance from court to wall: 5000mm min. snap down A16-43 can be fitted to any details of any additional structural Stored size: Width - 1900mm. backboard. requirements. Length - 4000mm. Height - 1830mm. Weight: 1200kg approx.

46 BASKETBALL BACKBOARDS A16

6a

6a

6

3

5a

4 5 7 7a

3 4 6 7

A16-79 Basketball Backboard - A16-43 Basketball Ring - Snap-Down A16-4 Basketball Glass Backboard A16-90 Mini Basketball Height Mobile, Cantilever 1800mm with Bolts and Net and Frame with Snap-Down Ring Adjusting Frame Adjustable for mini basketball. Front of base International standard. Australian and Glass backboards are an alternative to For junior basketballers. The system can be is padded. Floor anchors included. International Basketball Federation (FIBA) timber backboards. Ideal for competition added to any Acromat backboard and is Backboard: timber A16-111. Ring: A16-1. Rules and the British and European Standard venues and especially where spectator best incorporated at the design stage. Operation: manual hydraulic pump. BS EN1270: 1998. Ring is hinged on a base area is behind the backboard. These are Consists of two interlocking frames. One is Base: Width - 1200mm. Length - 1200mm. plate with a spring release and a spring best incorporated at the design stage. fixed to the backboard support structure Distance from court to wall: 3000mm min. return mechanism. The spring release allows Fixings can be provided to suit existing and one to the backboard. A latch system Stored size: Width - 1800mm. the correct load to be applied before the ring structure when upgrading to glass. and gas struts allow the board to be Length - 2700mm. Height - 1800mm. “snaps down”. High tensile bolts are Snap down ring A16-43 is bolted to lowered to mini basketball height. Weight: 400kg approx. supplied for fixing ring to the frame under the 65 x 35mm R.H.S. heavy duty bottom Operated from the floor with handle glass backboards or through the centre frame frame. Ring fixing is completely provided. Ring height adjustment: behind the timber backboards. independent of the glass. 3050 - 2600mm from floor. Ring size: 450mm I.D. x 20mm D high tensile 6a 7a solid steel. Net: A16-25. A16-44 Basketball Backboard A16-694 Replacement Handle for 5 Frame Padding Mini Basketball Shock absorbing foam pads and 300mm up A16-1 Basketball Ring, Bolts and Net the sides of the backboard. Supplied with International dimensions. Ring has 6mm fixings for installation by customer. steel base plate, 10mm D steel support brace and 12 rams horn hooks for attaching the net. High tensile bolts, nuts and washers for fixing are included. Ring size: 450mm I.D. x 20mm D high tensile solid steel. Net: A16-25. 5a A16-25 Replacement Net - White 47 A16 BASKETBALL BACKBOARDS

8a

8 9 10

1600 1600 1600

Stored Stored Stored Position Position Position

2900 F.F.L. 2900 F.F.L. 2900 F.F.L.

8 8a 9 10 A16-111 Basketball Backboard - A16-631 Basketball Backboard - Timber, Interior A16-633 Basketball Backboard - A16-632 Basketball Backboard - Side Swinging, Suspended, International size Side Swinging, Suspended, Top Side Swinging, Suspended, Bottom Double Wall Bracket 1800mm x 1050mm x 18mm, tough white Wall Bracket Wall Bracket Used where the distance behind the court melamine coating with 50mm wide black Similar to A16-631. Used when the height Similar to A16-631. Used when the height to the wall is a maximum of 5000mm and international markings outside edge and of the wall fixings suits arms at 3950mm of the wall fixings suits arms at 2900mm when it is acceptable for the board to shooting rectangle. above the floor. The bottom arms are above the floor. The top arms are angled store against the wall. Wall frame, arms angled down to support the bottom of up to support the top of the board. and board frame are a minimum of 38mm A16-3 Basketball Backboard, the board. sq. steel tube. All hinge points have steel Ring and Net tube bearings. A telescopic brace holds Consists of backboard A16-111 and board in playing position. Cables with ring A16-1 for indoor use. 12mm turnbuckles are fixed to the wall or structure of building to support the weight of the board. Beams between columns may need to be provided by the customer. Board: Timber A16-111. Ring and net: A16-1.

48 BASKETBALL BACKBOARDS A16

12 13

11

1600 1600

Stored Stored Position Position

2900 F.F.L. 2900 F.F.L. 14

11 12 13 14

A16-634 Basketball Backboard - A16-8 Basketball Backboard - A16-46 Basketball Backboard - Wall A16-53 Basketball Backboard - Side Swinging, Suspended, Variable Side Swinging, Cantilevered Fixed, Maximum Cantilever 1200mm Direct on Wall Wall Bracket Similar to A16-631. Used where there is Used for training. Installed in a location Used for training. Steel tube frame Similar to A16-631. Used when the arms no available fixings for support cables or clear of other courts and equipment. with lugs for attaching direct to wall to support the top and the bottom of where the arm length is less than Frames of square steel tube fixed to the or column. board are angled to suit the height of 2500mm and the wall fixings are strong wall support the board. Diagonal bracing Board: Timber A16-111. the wall fixings. enough to take the loads. Diagonal braces holds the structure rigid. Strong wall Ring and net: A16-1. between side arms to support the board. fixings required. Beams between columns may need to be Board: Timber A16-111. provided by the customer. Ring and net: A16-1.

49 A16 BASKETBALL BACKBOARDS

1760 Stored 1760 Position Stored Stored Position Hauling Position Cable

Hauling Hauling Cable Cable 1760

Winch Winch Winch

2900 F.F.L. 2900 F.F.L. 2900 F.F.L.

15 16 17

15 16 17

A16-84 Basketball Backboard - A16-70 Basketball Backboard - A16-22 Basketball Backboard - Hinged Forward Hinged Backward Backward Folding Used where the board is lifted up forward Similar to A6-84 but hinged backwards. Used where there are no fixings available to clear area. The location of available Winch options (ordered separately): in front of the backboard. Backboard is fixings and other features of the building Same as A16-84. fixed to vertical members hinged on two determine the direction the board hinges. beams or the roof structure. Bracing The backboard supported by diagonally frames fold to allow storage of backboard braced arms 95mm x 35mm steel tube close to the ceiling. Beams or fixing hinged from a beam or roof structure. points may need to be provided by Beams or fixing point for hauling and the customer. support cables may need to be provided Board: Timber A16-111. by the customer. Ring and net: A16-1. Board: Timber A16-111. Winch options (ordered separately): Ring and net: A16-1. Same as A16-84. Winch options (ordered separately): a. manual winch A16-11 or A16-12 b. manual winch A16-11 or A16-12 with portable electric driver A16-13 c. electric winch, key operated A16-52 d. electric winch, cordless remote control A16-550

50 BASKETBALL BACKBOARDS A16

1760 Stored Position Hauling Stored Cable Position Hauling Cable

Winch

2900 F.F.L. 2900 F.F.L. Winch

18 19 20

18 19 20

A16-590 Fall Arrestor A16-68 Basketball Backboard - A16-6 Basketball Backboard - Used where backboards are stored over Forward Hinged, Sliding Brace Wall Hinged, Lift Up seating Used where the area in front of the Only used where the backboard must backboard must be clear of all structure be lifted up for storage and the only Length of strap: 11 metres and insufficient area behind the board available fixings are on the wall. requires it to fold forwards for storage. Similar to A16-631 but the hinge system Backboard is fixed to vertical members allows board to lift up. Support cables hinged on two beams or the roof 5mm D and turnbuckles are attached to structure. Rear braces lock board into top corners of board and are fixed to wall playing position. As the backboard is or structural member. Diagonal braces raised, braces slide on guide rods behind between the arms stabilise the board. backboard. This allows the backboard to Board: Timber A16-111. store close to the ceiling. Beams or fixing Ring and net: A16-1. points may need to be provided by the Winch options (ordered separately): customer. Same as A16-84. Board: Timber A16-111. Ring and net: A16-1. Winch options (ordered separately): same as A16-84.

51 Y7 BASKETBALL BACKBOARDS - OUTDOOR

21d

21a

21c

21 21 Stored 21b

General Specification Installation 21a 21c Outdoor backboards consist of 1800 x 1050 ACROMAT provides a design service to Y7-44 Uprights for Y7-30, Maximum Y7-35 Basketball Post Safety Padding x 19mm waterproof ply A16-112 fixed to determine the type of backboards to suit Cantilever - 7000mm High density closed cell foam 15mm thick 40mm square steel tube frame. Hinge your court area and local conditions. Square steel section, end capped and hot with vinyl cover. Touch tape fastening points on arms have steel tube bearings. Please supply architectural plans of the dip galvanised. The local conditions and allows padding to be removed for storage. Diagonal braces between the arms hold area. ACROMAT’s trained engineers will the required basketball backboard arm Suits post up to 165mm diameter. the board in position. All steelwork is hot design the backboards and uprights and length determine size of uprights. Height: 2000mm. dip galvanised. Ring and net: A16-1. provide layouts of courts, socket locations Y7-42 Uprights for Y7-30 Maximum 21d Basketball ring, snap down A16-43 and and footing details. Contilever 5600mm A16-112 Basketball Backboard removable ring brackets Y7-45 can be Safety Y7-41 Uprights for Y7-30, Maximum - Timber, Outdoor fitted to any backboard. Check all fittings and fixings regularly. Cantilever - 4000mm International size Design Considerations Ensure they are in good condition and Galvanised pipe, end capped. The local 1800mm x 1050mm x 19mm, water proof Wind loads - Acromat outdoor basketball safe to use. conditions and the required basketball ply painted white with 50mm wide black backboards comply with the Australian backboard arm length determine size international markings outside edge and Building Code - AS 1170.2-2002). If wind 21 of uprights. shooting rectangle. loads exceed these loads, please contact Y7-40 Uprights for Y7-30 Maximum Y7-30 Basketball Backboard - A16-83 Basketball Backboard, Acromat as backboards can easily be Contilever 3200mm Two Uprights, Side Swinging Ring and Net - Outdoor designed to suit local conditions. Footing Board and frame is supported by four arms Y7-43 Uprights for Y7-30, Maximum Consists of backboard A16-112 and design is based on soil with bearing load hinged on a frame clamped to the uprights. Cantilever - 2700mm ring A16-1 for outdoor use. of 100kpa (AS1289). It is the customer’s Telescopic brace Y7-51 locks board in Regions A and B only. responsibility to check the local conditions. playing position. Cantilever - is the distance from the court 21b Cantilever - 7000mm maximum. side of the upright to the face of the Y7-48 Upright with Storage Lock for Uprights (order separately) Y7-43, Y7-40, backboard. The cantilever can be reduced Basketball Backboard, Side Swinging Y7-41, Y7-42, Y7-44 are installed off the to suit local conditions. Used in windy areas. Lock holds backboard playing area. to the upright in the stored position. Options (ordered separately): Mini Backboard and uprights ordered separately. basketball height adjustment A16-90.

52 BASKETBALL BACKBOARDS - OUTDOOR Y 7

23a

22 22 Stored 23

24a 26

26a

24 25

22 23 24 25

Y7-33 Basketball Backboard - Single Y7-39 Basketball Backboard - Single Y7-36 Basketball Backboard, Single Y7-37 Basketball Backboard - Single Upright, Side Swinging Maximum Upright with Socket, Reversible Upright with Socket, Fixed, Maximum Upright with Socket, No Cantilever Cantilever - 2400mm Maximum Cantilever - 2400mm Cantilever - 2400mm Backboard and frame is fixed directly to a Board and frame is hinged on two Board and frame is supported by two Board and frame is supported by two square steel section upright. 75 x 50mm tube arms. Telescopic brace 75 x 50mm tube arms. Upright rotates in 75 x 50mm tube arms bolted to a square Options (ordered separately): Mini locks board in play position. Upright rotates the socket to move board clear of the court steel section upright. basketball height adjustment. and board stores parallel to base line. area for other activities. Clearance required Equivalent to NSW Dept. of Public Works Options (ordered separately): Mini behind upright: 3300mm. Specification Standard SS57 26 basketball height adjustment Y7-34 Options (ordered separately): Netball ring Mini basketball height adjusting Y7-45 Removable Ring Brackets A16-230. Mini basketball height adjusting brace Y7-34. Ordered Seperately. Bracket fitted to backboard allows ring to brace Y7-34. Y7-31 Basketball Backboard - Single be removed. Handle Y7-46 ordered 23a Upright with Socket, Fixed, Maximum separately. A16-230 Netball Ring and Net - Cantilever - 1800mm 26a Practice Similar to Y7-36. Y7-46 Handle - Removable For fixing direct to a wall, post or Y7-31 Y7-56 Mini Basketball Height adjustment Ring Bracket and Y7-39 backboard uprights. brace for Y7-31. Used to remove basketball or netball rings 24a from removable ring brackets Y7-45. Y7-34 Mini Basketball Height Adjusting Brace Added to Y7-36, Y7-39, Y7-33 to adjust board from competition height to mini basketball height. Spring loaded pin locates each height and gas strut counterbalances the weight of the board.

53 A16 WINCHES

2

3

1 4

General specifications Installation A16-559 Winch - Electric, Single 3 Winches have large diameter drums to Acromat will assist you with the selection of Phase (No Switchgear or Wiring) suit 5mm D steel cable. Brackets or fixing winch to suit the application and supply Used when three phase power is not A16-552 Winch Remote Control plates are included. Covers are provided. details of electrical requirements to be available. Similar to A16-52 but with Switchgear - Three Phase, for provided by an electrician. Acromat’s trained single phase 0.75KW, 240volt motor. A16-52 Winch Advisory Service engineers will design and provide all fittings Customer to provide electrical wiring, Cordless remote system is factory fitted The selection of winch will depend on the required for installation. switchgear and key-operated control to the winch. Customer to provide 415volt load to be lifted, the type of operation and switch. This must be fitted by an three phase power outlet only at winch electrical connection options. Safety approved electrician. location. > manually operated Winches must be serviced regularly. A16-556 Winch Remote Control > manual with portable driver, 240volt Check oil level, fixings, cables and 2 > electric, 415 volt 3 phase or 240 volt fittings. Ensure they are in good condition Switchgear - Single Phase, for single phase - and safe to use. Repair or replace all A16-565 Winch Electric Switchgear A16-559 Winch damaged parts. and Wiring - Three Phase, for Cordless remote system is factory fitted Electrical connection options A16-52 Winch to the winch. Customer to provide 240volt 1 Customer to provide all electrical 1 Switchgear, wiring and key-operated single phase power outlet only at winch connection, wiring, switchgear and control switch is pre-assembled to the location. key-operated switch. A16-52 Winch - Electric, Three winch in the factory. 2 Customer to provide power outlet Phase (No Switchgear or Wiring) 4 Customer to provide a 415volt three phase only. Acromat to provide all electrical Three phase 0.35KW, 415volt, 50 cycle power outlet at winch location. connection, wiring, switchgear. motor drives 140mm D cable drum A16-500 Winch Electric - Single 3 Customer to provide power outlet through worm reduction unit. An oil bath Phase 120 D Cable Drum Through a A16-566 Winch Electric Switchgear only. Acromat to provide cordless is provided for the gears. Limit switches Warm Reduction Unit and Wiring - Single Phase, for remote control system. control the up and down movement. Includes control box and key switch. A16-559 Winch Customer to provide electrical wiring, Customer to install 240 Volt 10 Amp GPO Switchgear, wiring and key-operated switchgear and key-operated control supply cable to key switch. control switch is pre-assembled to the switch. This must be fitted by an winch in the factory. Customer to provide approved electrician. Lift: 13 metres max. a 240volt single phase power outlet at Safe load capacity: 350kg. winch location.

54 WINCHES A16

5

6a 7 Motor 6c 6b

6

7 Housing

8 9 10

5 6 7 9

A16-11 Winch - Heavy, Worm Drive A16-13 Winch Driver - A16-551 Winch Motor Drive - Electric A16-14 Winch - Ratchet Removable Hand Operated Portable Electric Single phase 0.56KW 240volt motor, Handle The 125mm D cable drum holds Single phase 240V, 720 watt 50 cycle. gearbox and switchgear permanently Boat type ratchet winch with special 25 metres of 5mm D galvanised steel Up and down switch. Designed to operate fitted to winch A16-11 (max. load 200kg), large drum to reduce damage to cables. cable. An oil bath is provided for the winch A16-11 (max. load 250kg), and or A16-12 (max. load 150kg). Drum capacity, 4m of *mm rope gears. The winch is operated both up A16-12 (max. load 200kg). Adaptors FZ2-1, Key-operated switch and limit switches and down with removable handle. FZ2-2, A16-51 are provided. control the up and down movement 10 Safe load capacity: 500kg. Economical system when several winches Customer to provide 240volt single phase A16-570 Tensioner - Linear Drive options: are used in one gymnasium. power outlet only at winch location. The handle is operated for tensioning and - portable electric winch driver A16-13. 6a releasing the load. Used where minimum - electric motor drive A16- 551. 8 A16-51 Winch Driver Adaptor travel and continuous adjustment are A16-12 Winch - Light, Worm Drive Suits winch A16-11 and A16-12. A16-18 Winch - Mechanical required. Maximum travel: 300mm. Hand Operated For winch driver A16-13. Auto Brake Safe load capacity: 280kg. Similar to A16-11 with drum 100mm D, Ratchet type winch with over-ride brake. 6b cable length 8 metres. Winch must be wound up and down. FZ2-1 Hexagon Adaptor 3/8 sq. Drive Safe load capacity: 250kg. Mounting bracket included. Winch must For winch driver A16-13. be checked periodically for wear and 6c adjusted. Cable length: 7metres. FZ2-2 Socket 5/8 AF Safe load capacity: 300kg. For winch driver A16-13.

55 A16 VOLLEYBALL

2

4

5

1a

3

1

General specifications 1 2 4 International Federation of Volleyball, Australian Volleyball Federation. A16-61 Volleyball Posts - with Two A16-91 Volleyball Umpire Stand A16-94 Volleyball Antennae Tensioners, for Socket 64mm I.D. International standard. Plywood platform, Antennae clamps to the net top and All Acromat games posts are made of (Pair) 610mm x 665mm x 19mm, adjustable in bottom above the court line. Two striped steel and designed to be as light as For competition, schools and clubs use. height from 730mm to 1330mm is fibreglass antennae 10mm D x 1820mm possible but robust enough to withstand International standard. Post consist of supported by a 20N.B pipe frame. Wheels long. Suits any volleyball net with harsh treatment and comply with the 75mm x 50mm steel section with are fixed to frame for easy handling. 1000mm drop. international standards. 65mm x 35mm telescoping inner section for height adjustment. Spring-loaded pin 3 5 sets the height. Linear tensioner A16-570 A16-431 Volleyball Umpire A16-92 Volleyball Net - International tensions the top of the net. The handle Stand Safety Padding Standard 100mm square mesh 2mm D must be operated for both tensioning and Padding covers three sides of the umpires polypropylene, with fibreglass batten releasing the load. A winch and pulley stand A16-91. Acrolite foam 20mm thick each end and lacing cord. Suit posts, A16-101 tensions the bottom of the net. carpeted on the outside and attached with A16-61 and A16-64. Order antennae and Base of post is pipe to fit sockets A6-9, touchtape. side band A16-94 separately. 11, 13 and 50. Size: 9500mm long x 1000mm drop. Heights at centre of net: 2430, 2350, 2240, 2150, 2100, 2050, 2000mm above floor. 1a A16-101 Volleyball Winch & Pulley Conversion Kit Fits A16-62 volleyball posts. Allows the bottom of the net A16-92 to be tensioned with a winch.

56 VOLLEYBALL A16

12

10

6

7a

9

11

8

7

6 7 8 10

A16-93 Volleyball Net A16-62 Volleyball Posts - with Linear A16-63 Volleyball Posts with Linear A16-100 Volleyball Net with Rope Suits posts A16-62 and A16-63. Tensioner, for Socket 64mm I.D. (Pair) Tensioner, for Floor Anchors (Pair) For recreational and primary school use Standard 100mm square mesh, 2mm D Similar to A16-61 but with one tensioner Used where floor sockets cannot be with games posts A16-57, 58 and A16-300. polypropylene. A16-570 for the top of the net. installed. Similar to A16-62 but with a ‘T’ Size: 9500mm long x 1000mm drop. Size: 9500mm long x 1000mm drop. shaped base and floor anchors selected to 7a Post spacing - 11000mm. suit the type of floor. Wheels fitted to 11 A16-330 Volleyball Linear base for easy handling. When ordering, Tensioner Conversion Kit A16-432 Volleyball Post Safety please advise type of floor. Replaces ratchet winch on earlier model Padding - Moulded (Qty 1) volleyball posts A16-62. The handle is 9 Pads 2200mm high, high density moulded operated for tensioning and releasing foam 15mm thick. Pads are held in place the load. A16-65 Volleyball Post - Centre with by touch tape straps. Linear Tensioner, for Floor Anchors A16-59 Volleyball Post - Centre - Used where floor sockets cannot be 12 with Linear Tensioner, for Socket installed. Where there is limited space Where there is limited space between A16-67 Volleyball Post between courts, this double-sided centre courts, this double-sided centre post can Safety Padding (Qty 1) post can have a net fitted to each side. have a net fitted to each side. Similar to Pads 2200mm high, high density Acrolite Used with posts A16-63. Minimum space posts A16-62. foam 15mm thick completely covered with between courts 1400mm. tough UV stabilised vinyl. Pads are held in A16-64 Volleyball Posts - place by continuous touch tape that International, for Socket 78mm I.D. closes over the tensioned volleyball net. For international competition. Similar to A16-61, stronger, heavier steel sections. Suits sockets A6-20 and 69 and 71.

57 A16 MULTI-SPORT GAMES POSTS

18b

14

18 13 18a

17

15 16

General specifications 15 16 18 All Acromat games posts are made of steel and designed to be as light as A16-311 Volleyball Net Tensioner A16-310 Volleyball Post, Net and A16-301 Games Post - Freestanding, possible but robust enough to withstand with Clamping System for Beach Pegs - Outdoor with Junior Backboard and harsh treatment and comply with the Volleyball For recreation or . Counterweight international standards. Hot dip galvanised fittings with pulley Tubular steel posts with spike base and For junior primary school use. and linear tensioner A16-570. hooks at the various volleyball heights. Consists of A16-300 games post 13 Clamping system allows net height Net A16-100 and pegs included. with removable fan shaped junior adjustment for different competitions and basketball backboard A16-661 and A16-57 Games Posts, for Sockets changes in beach sand level. Order net 17 counterweight A16-302. A16-93 and posts separately. Warning: Always use counterweight For primary school or recreation use. A16-300 Games Post - Freestanding, base for additional stability. Two posts 50 N.B. pipe with hooks to A16-312 Post to suit A16-311 - Adjustable Height attach net. Fits sockets A6-9, 11, 13, 100mm x 100mm Galvanised (Pair) For primary schools or recreation, 18a 30 and 50. outdoor and indoor use. A16-302 Counterweight for Net heights: Volleyball, badminton, tennis Adjustable netball post fixed to a Games Post A16-300 and mini tennis. ‘T’ shaped weighted base with 150 D Additional weight fits neatly over base. 14 wheels with rubber feet X6-13 to protect Must be ordered if adding junior the floor. Two spring hooks allows backboard to A16-300. attachment of a net and a sliding brace A16-58 Games Posts - Double 18b gives additional stability. Sided, for Sockets A16-661 Basketball Backboard - Ring height: 3050mm and 2440mm. Used between courts. As detailed in Junior, Fan Shape Net heights: variable, for volleyball, A16-57 but hooks on both sides. For junior primary school use. badminton and tennis. Steel frame supports a fan-shaped board Stored size: 730mm x 780mm x 2135mm. 750mm x 450mm. Fits to any existing ACROMAT netball post. Counterweight A16-302 must be used if adding this backboard to A16-300.

58 NETBALL A16

19 21

23 20 22

24

25

26 20a

27

General specifications 20 22 25 International Federation of Netball Associations, All Australian Netball A16-21 Netball Post - Adjustable A16-74 Netball Posts - Adjustable A16-30 Net - Chain - Replacement Association. Height, for Sockets (Qty 1) Height and Floor Plates (Qty 1) Used on outdoor netball rings. Adjusts for junior competition. Similar Used where sockets cannot be installed. All Acromat games posts are made of to A16-75 but upper section of post Similar to A16-10 but adjustable height. 26 steel and designed to be as light as telescopes. Ring is as detailed for A16-75. Ring height: 3050mm and 2440mm A16-438 Netball Post Padding, possible but robust enough to withstand Ring height: 3050mm and 2440mm above floor. Moulded 3000mm High (Qty 1) harsh treatment and comply with the above floor. Stored height 2135mm. international standards. A16-44 Base Padding Pads consist of high density 15mm 20a moulded foam O.D. 97mm. 23 19 X6-40 Replacement Rubber Knob Maximum post diameter: 60mm. 21 A16-230 Netball Ring and Net - 27 A16-75 Netball Post and Net - Practice (Qty 1) for Socket (Qty 1) A16-10 Netball Post, Net and Fixed direct to a wall or post and to the back A16-439 Netball Post Padding, Competition standard. Steel tube 64.5mm 1 Floor Plate (Qty 1) of outdoor basketball backboards for Y7-31 Moulded 2400mm High (Qty 1) (2 /2") D upright with ring and net. Used where sockets cannot be installed. and Y7-39. Ring, as detailed for A16-75, is Similar to A16-438 but for adjustable Suits socket A6-9, 11, 13 and 50. Locating Steel pipe supported by a T-shaped R.H.S. welded to an L-shaped bracket with two netball posts. pin prevents rotation. steel base with rubber feet X6-13 and holes for fixing. Stored height 2135mm. Ring: 380mm I.D. x 16mm D high tensile solid transport wheels. Holding down knob steel with 12 rams horn hooks to attach net. X6-39 and threaded floor plate A6-6 are 24 Ring height: 3050mm above floor. included. Ring is as detailed for A16-75. A16-25 Net - Replacement Ring height: 3050mm above floor. A16-232 Netball Post and Net - Suits all netball rings. Galvanised, for Socket (Qty 1) Competition standard. Steel pipe 60mm D upright with ring and net. Locating pin prevents rotation. Suits socket A6-30. Hot dip galvanised finish for outdoor use. Ring is as detailed for A16-75.

59 A16 BADMINTON

29 31 32

30

33

29b

29a

28

General specifications 29 30 32 The International Badminton Federation Statute Book. A16-117 Badminton/Mini Volleyball A16-119 Badminton/Mini Volleyball A16-28 Badminton/Mini Volleyball Posts with Floor Plates (Pair) Centre Post with Floor Plate (Qty 1) Centre Post, for Socket (Qty 1) All Acromat games posts are made of Tube upright 32 x 32mm sq. is fixed to Used where there is less room between Similar to A16-27. Nets can be fitted to steel and designed to be as light as T-shaped base 50mm x 6mm F.M.S. with courts. Similar to A16-117 but with cross each side of the post. possible but robust enough to withstand 12 mm D braces. The height adjustable base and centre rivet head. Nets can be A16-403 Badmington Post - Safety harsh treatment and comply with the extension 38 x 38mm sq. tube is fixed by fitted to each side of the post. Padding for A16-28 international standards. T-screw. Grooved top cap and hook for net 31 28 cord. Rivet head below base locates into 33 a keyhole floor plate A6-15 supplied. A16-27 Badminton/Mini Volleyball Rubber feet X6-13 protect floor. A16-24 Badminton Net A16-16 Badminton Posts - Posts, for Sockets (Pair) Height adjustment: badminton 1550mm International standard. Nylon mesh 20mm Freestanding (Pair) Alternative to A16-117. Same upright but mini volleyball 2200mm maximum. sq. with white polyethylene headband and For international competition. Net cord welded to pipe base to fit sockets A6-9, Net sold separately. 3mm D top cord. passes over grooved top cap on post and 11, 13, and 50. Size: 6100mm long, x 760mm drop. is fitted into a jamming cleat to give exact 29a A16-402 Badmington Post - Safety adjustment. Post 38 x38mm tube is fixed X6-13 Foot - Rubber - 50 x 6mm - Padding for A16-27 to a 30kg base. Rubber feet X6-13 protect Replacement the floor. Wheels, 50mm D are fixed to Suits badminton post bases. base for ease of handling. Net height: 1525mm in centre. 29b Post height: 1550mm A16-400 Badminton Post Safety Net sold separately. Padding - Base and Upright (Qty 1) A16-404 Badmington Post - Safety A16-401 Badminton Centre Post Padding for A16-16 Padding –Base and Upright for A16-119 (Qty 1)

60 TENNIS A16

37

36

35

38

34

General specifications 34 36 Lawn Tennis Association of Australia Rule Book. A16-238 Tennis Posts with Linear A16-89 Tennis Posts, Linear Tensioner Tensioner, for Sockets (Set) and Floor Plates (Set) All Acromat games posts are made of Pipe 50 N.B. with tensioner A16-570 Used where sockets cannot be installed. steel and designed to be as light as one side and hook other side. Fits sockets T-shaped base locates in keyhole floor possible but robust enough to withstand A6-9, 11, 13, 30 and 50. Hot dip plate A6-15. Tensioner A16-570. harsh treatment and comply with the galvanised finish is optional. Rubber feet X6-13 protect floor. international standards. 35 37

A16-239 Tennis Posts - A16-87 Tennis Net Freestanding, Mobile (Set) Mesh 50mm square 2mm polypropylene, Where sockets or floorplates cannot 50mm white net binding at top. be installed this system with castors Size: 11665mm long x 820mm drop. is wheeled into place. Posts and base 75 x 50mm sq. steel sections slot 38 together for easy dismantling for storage. A16-237 Tennis Umpire Stand Tensioner A16-570. Hot dip galvanised frame with seat. Ordered Net A16-87 separately. Writing tablet ordered separately. A16-240 Tennis Umpire Stand Writing Tablet Fits onto umpire stand A16-237.

61 A16 HOCKEY, SOCCER & LACROSSE GOALS, COURT LINING TAPE

39d

39 Stored 39b

39c 42

39 40 39a

41

General specifications A16-105 Lacrosse Goal - Indoor - 39d 42 Hockey: International and Women’s Folding, 1320 x 1270mm High (Qty 1) A16-444 Soccer/Hockey Goal International Hockey Rules Board. Similar to A16-106. Cross Bar Padding Court Lining Tape Used for temporary courts or where Soccer: Australian Indoor Soccer A16-104 Soccer Goal - Indoor - 40 it is not practical to use painted lines. Federation Inc. Folding, 5000 x 1250mm High (Qty 1) Self adhesive PVC tape suitable for Similar to A16-106. A16-217 Hockey Barrier, 95mm High All Acromat games posts are made of smooth floors. Rolls length: 33metres. (Qty 1) steel and designed to be as light as 39a Steel tube with timber front face angled Width 48mm 36mm 24mm possible but robust enough to withstand A16-225 Indoor Goal Holding to deflect balls downwards. Locating pins harsh treatment and comply with the Down Plates Filled to Bottom Rail Colour Code Code Code fit into floor plates A6-7 and interlocking international standards. (Qty 1) pins link the 4000mm long barrier sections Red A16-120 A16-127 A16-135 Used if the goals must be fixed to the together. Green A16-121 A16-128 A16-136 39 floor. Suits all indoor goals. Holding down knob X6-39 retained by a chain, screws 41 Black A16-122 A16-129 A16-134 A16-106 Soccer/Hockey Goal - into a threaded floorplate A6-6. Yellow A16-123 A16-130 - Indoor - Folding, 3100 x 2050mm High A16-218 Soccer/Hockey Barriers - 39b (Qty 1) Removable, 2400 x 1200mm High White A16-124 A16-131 - A16-216 Soccer/Hockey Goal Net - Frame 50mm sq. light steel tube with Plywood panel is supported by tubular Indoor 3000 x 2000mm - Replacement Blue A16-125 A16-132 - hinged end frames for storage. Removable steel frame with folding leg. Holding Nylon sports mesh 50mm sq. with 6mm rods hold the 50mm sq. sports mesh to down fittings and floor plates to suit the polyethylene rope in the bottom edge. Court Lines - Painted the frame. Rubber buffers FCI-431 protect type of floor are ordered separately. Where painted lines are required, the floor. Holding down plates A16-225 39c Option: Clear perspex top half of barrier Acromat can provide layouts, make and pads ordered separately. A16-443 Soccer/Hockey Goal to improve spectator viewing. recommendations or arrange for the Safety Padding (Qty 1) work to be done. Two pads for the 50mm sq. vertical front frames. Carpeted covered Acrolite foam 20mm thick is held in place with touch tape.

62 STORAGE BRACKETS & TROLLEYS A16

49

47

46

48

50

43 44 45

General Specifications 43 46 48 Storage brackets - Maximise the use of available storage area, help to minimise A16-149 Storage Trolley - Games Posts A16-140 Storage Bracket - A16-137 Storage Bracket - Horizontal damage to the equipment and makes Useful for transporting games posts. Vertical, Four Post Used when storeroom ceiling height is too handling of games posts easier. Steel Timber base provides additional storage Designed for netball, volleyball or tennis low to store posts vertically. Consists of a brackets are fixed to the wall and floor. area for nets etc. Castor wheels 95mm D. posts, as well as uneven bars and rails. pair of brackets to store posts or other Maximum load: 250kgs. Wall bracket with a hook and chain for equipment horizontally. Installation Size: 1600 long x 600 wide x 980mm high. each post, holds the post vertically against Acromat’s trained engineers will design the wall. Floor bracket retains the bottom 49 and provide all fixings required for 44 of the post and prevents floor damage. installation. A16-141 Storage Bracket - Racquet A16-148 Storage Box with Wheels A16-139 Storage Bracket - Similar to A16-143 but with 6 pairs of Storage trolleys - Most useful in larger Useful for storing nets, balls or other Vertical, Three Post pegs spaced to suit approximately 26 stadiums where it is not practical to carry equipment. Box is constructed of plywood Similar to A16-140. tennis or badminton racquets. equipment to and from the storage area 19mm thick and fitted with non-marking A16-138 Storage Brackets - or if storage racks cannot be installed. castor wheels 95mm D. 50 Vertical, Two Post Trolleys have a steel frame and timber Size: 1500 long x 600 wide x 600mm deep. base fitted with non-marking wheels. Similar to A16-140. A16-146 Storage Strap - for Super 45 Soft Mats 47 Webbing strap 50mm wide holds mats A16-219 Storage Trolley - vertically against the wall as safety A16-143 Storage Bracket - Hockey Barriers padding or for storage. Badminton, Four Post Designed for the storage of 4000mm long Consists of 50 x 6mm FMS fixed to the hockey barriers. Steel angle frame with wall with 12mm rod pegs spaced to suit plywood base bolted to pipe side frames. badminton posts. Fixed centre wheels 150mm D and end castors 95mmD. A16-142 Storage Bracket - Size: 2135 long x 680 wide x 750mm high Badminton, Two Post side frames. Similar to A16-143.

63 A17/18/19 RHYTHMIC GYMNASTICS & GYM FUN EQUIPMENT

2

6

3

4

1 5

Safety 1 2 5 Check all fittings and upholstery regularly to make sure they are in good condition A17-29 Parachute - 6000mm D A18-96 Physio Ball - 1000mm D A18-75 Gym Fun Hoop and safe to use. Lightweight parachute, two colours, For school and gym club use, stretching For primary school and kindergym use. 16 webbing handles for good grip with or fun activities. Solid unbreakable polypropylene plastic. children’s hands. Storage bag supplied. Size: 750mm D x 12mm D cross section. 3 Colours: red, blue, green and yellow. A17-30 Parachute - 4000mm D Similar design to A17-29. Two colours, A18-95 Pool Ball - 500mm D 6 16 handles. For small children and gym fun activities. Light inflatable ball. A18-73 High Hopper Helps children have fun while developing 4 balance and movement skills. A18-71 Gym Fun Ball For small children and gym fun activities. Inflatable plastic balls 150mm D. Colours: red, blue, green and yellow.

64 RHYTHMIC GYMNASTICS & GYM FUN EQUIPMENT A17/18/19

7a 7b 7c 7d 7e 7f 7 10 10a 10b 10c 10d 10e 10f

7g 7h 7i 7j 7k 7l

8a 8b 8c 8d 8e 8f 8g 8h 8i 8 11

9

7 8 9 11

Gym Ball - Olympic/F.I.G. - Rubber Gym Ribbon on Wooden Stick - A18-80 Ribbon Roller A18-17 Gym Rope - Olympic/F.I.G., International standard, 190mm D inflatable. 6000mm Long Used for storing ribbons. Length: 440mm. 3000mm Long Anti-static ribbon 50mm wide fitted to a Weight: not less than 150g. Plaited polyester rope, 8mm D with knot Gym Ball - Olympic/F.I.G. - Plastic wooden stick 10mm D x 530mm long with each end. International standard 190mm D inflatable. screw eye and swivel hook. Extra length 10 Colour Plastic allowed for shrinkage. Gym Club - Olympic/F.I.G. - Plastic 7a White A18-33 Gym Fun Ribbon on Wooded Stick - Length 440mm. 7b Light Blue - 3000mm Long Weight not less than 150g. Shorter ribbon for small children. 7c Aqua A18-35 10a 7d Green A18-34 Colour 6000mm 3000mm A18-39 Gym Club - Plastic, Black 7e Yellow A18-32 8a Red A18-19 A18-219 10b A18-43 Gym Club - Plastic, White 7f Red A18-30 8b Gold A18-21 A18-221 10c 7g Blue A18-31 8c Green A18-25 A18-225 A18-42 Gym Club - Plastic, Yellow 7h Purple A18-50 8d Light Blue A18-26 A18-226 10d 7i Mauve - 8e Dark Blue A18-27 A18-227 A18-40 Gym Club - Plastic, Red 7j Fluro Pink A18-36 8f Purple A18-28 A18-228 10e 7k Pink A18-49 8g Mauve A18-16 A18-222 A18-44 Gym Club - Plastic, Green 7l Black A18-46 8h Pink A18-20 A18-220 10f A18-41 Gym Club - Plastic, Blue 8i White A18-23 A18-223

65 A20 FOAM SHAPES

1 2 3

General Specifications 1 2 3 Designed for educational gymnastic programmes especially with small A20-1 Cylinder, 900 x 600mm D A20-7 Steps, 750 x 900 x 600mm A20-12 Hexagon, 3 steps x 250mm wide 900mm Across the Flats x 500mm children. A20-2 Cylinder, 900 x 500mm D A20-8 Steps, 1200 x 900 x 500mm All foam shapes are covered with tough A20-3 Cylinder, 900 x 400mm D fire retardant vinyl cover for indoor or 3 steps x 400mm wide outdoor use. Colours vary between panels A20-4 Cylinder, 900 x 250mm D to give visual interest to young children. All seams are double stitched. Heavy-duty plastic zips allow easy replacement of damaged foam or cover. The foam is 23-32kg/m3 premium grade polyurethane to give shape and stability to the shapes. Other shapes made on request.

66 FOAM SHAPES A20

6

4 5

8

9

7

10

11

4 9 11

A20-14 Sphere, 760mm D A20-61 Wedge - Folding, Gym Fun Junior Circuit Training 1800 x 1200 x 600mm A20-15 Sphere, 600mm D A20-39 Block with Touch Tape Base, High density foam covered with tough fire 510 x 1220 x 600mm A20-16 Sphere, 450mm D retardant vinyl. Wide enough for children to roll down sideways. Designed for A20-38 Barrier with Touch Tape Base, 5 kindergym, school and gymnastic 610 x 1220 x 760mm A20-18 Wedge, programmes. Wedge folds to form a A20-37 Wedge with Touch Tape Base, 1800 x 900 x 12 to 400mm padding box - 1200mm x 900mm x 610 x 610 x 530mm 600mm. Touch tape holds it closed. 6 A20-26 Cylinder with Touch Tape 10 Base, 430 x 600mm D A20-20 Wedge, 1200 x 900 x 12 to 700mm A20-80 Backflip Trainer, Vinyl Covered over 7 Medium Density Foam 1030 x 890 x 700mm A20-19 Wedge, 700 x 900 x 12 to 400mm A20-81 Backflip Trainer Stabilising Wedge 8

A20-17 Wedge, 750 x 900 x 12 to 250mm

67 A22 LANDING PITS AND EQUIPMENT

1

2

3

4

General Specifications Design and Construction Requirements 1 3 Training pits are used extensively in Acromat provides layouts to determine the training gyms. They provide a softer most efficient use of the gymnasium and A22-50 Pit Trampoline with Woven A22-23 Equipment Stand with Access landing area that assists in the ensure there is sufficient landing area for Net and Padding Platform development of new skills and high each apparatus. Details will be provided to Trampoline with no frame or springs on Support uprights fitted into each side of repetition training. Most pits are below assist in construction of the pit. landing pit end. Frame is fixed to floor. the pit suits all horizontal and single bars. floor level but in some situations above Carpeted padding on three sides covers One side is fitted with a padded access Pit Equipment floor level or moveable pits can be springs and frame and provides access. platform 500 x 500mm that can be locked Acromat will recommend the appropriate provided. Woven net A22-54, 4270 x2135mm. into position. apparatus, trampolines, pit edge safety Springs A12-25, Qty 120. Warning padding, access systems, pit covers and Pit size: Width - 3000mm minimum. 4 Pit foam and padding must be in good foam fillings. Depth under trampoline - 1200mm A22-29 Pit Edge Safety Padding - condition to provide the maximum level minimum. Length - 5400mm. Installation Carpeted, Fixed of safety. Landing area length - 5000mm minimum. Acromat’s trained engineers will design Provides protection on the top edge of the Landing area depth - 1800mm minimum. Guidelines and supply all fittings required for the pit. Foam core, density 29-32kg/m3 with USA GYMNASTICS Safety Handbook for installation of the pit equipment. Acrolite top layer is carpeted and Gymnastics and other Sport Activities 2 Safety fabricated to suit the shape of the pit. Acromat uses the recommended guidelines In the event of fire in the pits containing A22-250 Pit Foam Cubes Padding is fixed to the floor with a steel for pit sizes and safety requirements set polyurethane and other foams - toxic Used in landing pits to provide a soft strip fitted in a pocket sewn into the carpet out in the handbook. smoke and fumes emitted can cause landing area. and to a timber member on the pit wall. serious risk to life. Extreme care should be Warning - Care must be taken to ensure Size: 290mm wide x 120mm above the taken to prevent the possibility of fire. Fire the pit is kept full of foam and it is not floor level. retardant can be added to the foam. If this packed down hard. is required please specify it when requesting pit information or quotations.

68 LANDING PITS AND EQUIPMENT A22

7

6

5

9

8

11 10

5 7 9 11

A22-38 Pit Edge Safety Padding - A22-240 Pit Base - Suspended Air A22-87 Pit Cover Electric Hoist - A22-45 Pit Edge Safety Padding - Carpeted, for Spring Floors and Flow System 3 Phase, 1 Ton Carpeted, Removable Landing Mats Pit base fitted 1200mm below floor level, Chain hoist for lifting pit covers. Fittings, Removable padding suits pit covers Used to pad the edge of a spring floor, allows airflow, reduces the volume of guide pulleys and limit switches are A22-81 or A22-85. Similar to A22-29 but landing mats or sunken landing mat. Carpet foam cubes required and helps prevent included. Beams to support the hoists held in place by studs welded to the steel covered Acrolite foam is fixed to the foam from packing down. Steel may need to be installed by the builder. strip and held to the floor with keyhole carpeted floor with touch tape. A pocket framework fixed to pit wall supports floor plates A6-15. sewn into the carpet holds a steel strip springs A12-25 attached to vinyl coated 10 Gymnastics safety fixed to the pit wall. mesh fabric. Foam layer on the floor of A22-81 Pit Covers - Removable, ACROMAT Pty Ltd would like to point out the pit provides additional safety. Manual Lift Out that gymnastic activities involve the 6 Pit size: Depth - 1800mm minimum. Used where the landing pit needs to be possibility of accidental injury. We stress Width - 3000mm minimum. A22-24 Access Platform - Cantilever covered to allow other activities. that our equipment should never be used 1800mm 8 Steel framework 600mm wide with 19mm by anyone who is not properly trained and Allows access to rings or other equipment plywood flooring panel span across the supervised. The best gymnasts in the over a pit. Brackets fixed to floor or wall A22-85 Pit Covers - Hinged Lift Up pit. Fitted with keyhole plate lifting points. world are extremely safety conscious; supports a hinged arm with a padded Used where the landing pit needs to be Handles are provided. Two to four people they know how dangerous it is to use platform 500 x 500mm. covered to allow other activities. are required to move panels to a storage equipment without proper supervision. Steel framework panels with 19mm area. If a travelling electric hoist is used, Be sensible... recognise not only your plywood flooring span across the pit are larger panels can be provided. Removable limitations (as a gymnast or supervisor), hinged on one side. Anchor point on the pit edge safety padding is required but also the limitation of the equipment. other side is provided for the electric hoist (ordered separately). Always check apparatus to make sure it A22-87 (ordered separately). This allows is safe before using it. the panel to lift up and store vertically. One person operation. Pit edge safety padding is required (ordered separately).

69 A23 COLUMN PADDING

1 2 3 4 5 6

General Specifications Design and Installation 1 4 Padding consists of 30mm Acrolite closed Acromat’s trained engineers will design cell foam covered with blue needle and supply all fittings required for the A23-1 Column Padding - Flange Only A23-11 Duct and Pipe Padding punched polyolefin fibre carpet fabricated installation of the padding. Padding can Padding is fabricated to suit the Padding fixed to the wall curves around to suit the shape required. Standard be designed and manufactured to improve shape and size of universal columns. in front of the obstructions. height - 2000mm. Fixings vary to suit the safety in almost any situation. Can be installed by customer, no Standard size: up to 400mm wide x application and structure of the building. tools required. 400mm deep. Warning Padding other than standard sizes can Standard size: up to 300mm wide flange. To reduce the risk of injury, padding must 5 easily be made. Contact Acromat for be provided where columns or other 2 more details. obstructions protrude into the building A23-10 Column Padding - Circular, Vinyl covered padding is available if and where runoff areas around games A23-2 Column Padding - Touchtape fixings allow installation required. courts or activities are insufficient. Flange with Wall Behind by customer, no tools required. Used where a column flange protrudes Standard size: up to 400mm D up to 30mm in front of the wall. Padding is fixed to the wall. 6 Standard size: up to 300mm wide flange. A23-20 Column Padding - 3 Rectangular Touchtape fixings allow installation A23-3 Column Padding - by customer, no tools required. Flange and Wall Standard size: up to 200 x 200mm. One side of padding is fabricated to suit the flange and the other side is fixed to the wall. Standard size: up to 300mm wide flange.

70 WALL PADDING, CABLE PADDING A23

10a

7 8 9 10 11 12

13

7 10 11 12

A23-40 Column Padding - ‘U’ Shape A23-50 Wall Padding - Removable, A23-60 Wall Padding - Fixed, A23-63 Wall Padding - Vinyl, ‘U’ shape padding fixed to the wall. 3000 x 2000 x 30mm 3000 x 1700 x 30mm 3000 x 2000 x 100mm Standard size: up to 100 x 200 x 100mm. Carpeted padding fixed to the wall with Carpeted padding. Pockets sewn in the Used when vinyl covered wall padding touch tape edging A23-51. When not carpet on all sides holds steel strips for is required or where it is removed and 8 required as wall padding it can be fixing to the wall. handled regularly. Touch tape straps removed and used as exercise or tumbling A23-64 fixed to wall holds the vinyl A23-30 Corner Padding A23-61 Wall Padding - Fixed mats. covered mat A8-173 in place. ‘L’ shape padding fixed to the wall. 6000 x 2000 x 30 Standard size: up to 100 x 100mm. 10a Carpeted padding fixed to wall through 13 A23-51 Touch Tape Edging - Carpeted steel strips on back of padding. 9 Used to fix carpeted padding to the wall A23-115 Cable Padding - Carpeted, or provide a neat finish and permanently 2000mm Long A23-31 Wall and Corner Padding fixes carpeted landing mats, tumbling Carpet wraps around the cable and is held ‘L’ shape padding fixed to the wall. runs or floor areas to the floor. Touch tape in place by 25mm wide touch tape. Standard size: up to 100 x 1000mm. hook 50mm wide sewn to one edge attaches onto carpet. Pocket sewn in the other edge holds a steel strip for fixing to the wall or floor.

71 General specifications Company safety policy This catalogue has been prepared to give Acromat believes that coaches and details of standard Acromat equipment. athletes should be aware of the potential The range includes simple, sturdy, yet danger of activities such as gymnastics inexpensive equipment as well as world and the possibility of accidental injury. We class equipment designed to meet the recommend that equipment should never latest international specifications (that is be used without proper supervision by a Olympic Standard). qualified coach. The apparatus should be checked by the coach and the athletes Standards prior to use. All precautions should be taken to minimise risk by working within F.I.G. Federation of International your known experience and limitations. Gymnastics - measurements, dimensions and forms. Improvements S.A.A. Australian Standards Z12-1962 Acromat has a policy of continually improving its products. As alterations Basketball and mini ball: occur to National and International Australian and International Basketball Specifications, or improvements in product Federation Rules (FIBA). British and design are engineered, the improved European Standard BSEN1270:1998 product will be substituted. Netball: International Federation of Netball Safety Associations, All Australian Netball Acromat equipment has been constructed Association. so that it will withstand harsh treatment. Knobs and other protrusions have been Volleyball: eliminated wherever possible to minimise International Federation of Volleyball, the risk of injury. Australia Volleyball Federation Sports Organising Commission & F.I.B.V. Alterations Acromat does not recommend the Badminton: modification of equipment in any way. The International Badminton Federation To do so would negate our responsibility Statute Book. towards guarantee and product liability. Tennis: International Tennis Federation Rules. Product Information Whilst every care has been taken to Hockey: provide accurate information and product International and Women’s International specifications, Acromat accepts no Hockey Rules Board. responsibility for errors in this catalogue. Acromat reserves the right to change Finish information and specifications without All exterior surfaces which are not zinc or prior notice. chroma plated will be painted with Acromat blue lacquer A1/305 over self Copyright 2001© etching primer, or powder coated in special colours. All removable bolts and nuts are zinc or chrome plated depending on location and item or equipment.

72