Workspace Desktop Edition
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Content Moderation Help Card
Content Moderation Help Card Content Moderation Content Moderation allows you to approve or decline content before it is posted to your website. Click Content Moderation and select Moderated Groups to begin the setup process. You can configure Content Moderation two ways. 1. Choose workspaces that are always moderated (e.g., sections, site homepages). Content added to workspaces specified in a Content Group will require approval for all editors when you activate the Moderate All Editors checkbox for the Content Group. 2. Set combinations of workspaces and editors requiring moderation (e.g., the PTO section and user Eric Sparks). Creating Content Groups Adding Moderated Users You use Content Groups to define workspaces subject to Content Moderation. If you only wish to moderate some editors, you will need to add them as To create a Content Group... Moderated Users. Whenever a moderated user edits content in a workspace 1. In Site Manager, select Content Moderation from the Content Browser. specified in any of the Content Groups, that user will only be able to send 2. Select Moderated Groups. content for approval. 3. On the Content Groups tab, click New Content To add Moderated Users... Group. 1. In the Moderated Groups workspace, click Moderated Users. 4. Add a Name and a Description for your group and click 2. Click Add Group or Add User. Save. 3. Use Search to locate groups or users you wish to moderate. You can To add workspaces and moderators... filter groups by category. 1. Click on the name of your Content Group. 4. Click Select to the right of each group or user name. -
Bforartists UI Redesign Design Document Part 2 - Theming
Bforartists UI redesign Design document part 2 - Theming Content Preface...........................................................................................................................6 The editor and window types......................................................................................7 Python console.............................................................................................................8 Layout:................................................................................................................................................................8 The Console Window.........................................................................................................................................8 Menu bar with a menu........................................................................................................................................8 Dropdown box with icon....................................................................................................................................9 RMB menu for menu bar....................................................................................................................................9 Toolbar................................................................................................................................................................9 Button Textform..................................................................................................................................................9 -
Bluebeam Revu Kansas Department of Transportation 700 SW Harrison Topeka, KS 66612
Kansas Department of Transportation-Bureau of Local Projects http://www.ksdot.org/burLocalProj/BLPDocuments/KDOTBLPEplans.pdf July 1, 2014 i Bluebeam Revu Kansas Department of Transportation 700 SW Harrison Topeka, KS 66612 For additional KDOT training sources, please visit KDOT’s CADD Support channel located at www.youtube.com/kdotcaddsupport Helpful web links: https://studio.bluebeam.com Credit for a majority of this manual goes to: Mike Dillner, KDOT CADD Support Scott Marquis, KDOT CADD Support Jonathan Mushock, KDOT Traffic Safety and Technology Misty Rodriguez, KDOT KCTC Trainer Megan Murray, KDOT KCTC Trainer Ingrid Vandevort, KDOT KCTC Training Coordinator Chapters 1-4 and Appendix A were written by these people and they deserve the credit for the quality of the document they have produced. Revision date: July 2014 ii Bluebeam Revu Kansas Department of Transportation Introduction to Bluebeam Revu This is a guide for how to use Bluebeam Revu for your PDF markup and collaboration needs. Bluebeam Revu provides powerful and easy to use features for marking up Architecture, Engineering, and Construction (AEC) plan PDF documents. The Studio Session feature allows users from any location to participate in a collaborative review. Bluebeam makes use of Amazon Web Services (AWS), commonly referred to as the Amazon Cloud. This service will host the documents for the Studio Session. There are two roles within a Bluebeam Studio Session. That of an initiator, and that of a participant. If you are going to initiate a Studio Session you need to have any tier of Bluebeam Revu installed on your pc. However, to be a participant all that is required is Bluebeam Vu (a free PDF reader), though Bluebeam Revu can be used as well. -
Feature-Rich Components & Tools That Boost the Productivity for You & Your
Feature-rich components & tools that boost the productivity for you & your development team! Overview tmssoftware.com products Contents VCL Components for Windows application development ........................................................................................... 5 TMS Component Pack............................................................................................................................................... 6 Grid Components .................................................................................................................................................. 6 HTML ENABLED COMPONENTS .......................................................................................................................... 10 Edit controls ........................................................................................................................................................ 13 Planner components ........................................................................................................................................... 17 Outlook / inspector bar components ................................................................................................................. 19 Web connectivity components ........................................................................................................................... 20 Memo components ............................................................................................................................................ 22 System -
Horizontally Scrollable Listboxes for Windows 3.X, Using C++
Horizontally Scrollable ListBoxes for Windows 3.x, using C++ Ted Faison Ted is a writer and developer, specializing in Windows and C++. He has authored two books on C++, and has been programming in C++ since 1988. He is president of Faison Computing, a firm which develops C++ class libraries for DOS and Windows. He can be reached at [email protected] List boxes are among the most commonly used child controls in Windows applications. List boxes are typically used to show lists of files, fonts, or other variable-length lists of textual information. To add a list box to a dialog box, you generally edit a resource file, using programs such as Microsoft's Dialog Editor or Borland's Resource Workshop. Windows handles most of the list box details transparently. For example, if you add strings to a list box, Windows will automatically put a scroll bar on the control when the list box contains more strings than can be displayed in the client area of the list box. Windows handles scroll bar events - such as moving the thumb or clicking the up/down arrows - without any need for user code. Displaying a list of files in a list box is a somewhat easy task, because filenames have a predefined maximum number of characters. When you create the list box resource, you will generally make the control wide enough to display the longest filename. But what if you use a list box to display strings of varying and unknown length, such as the names of people or the titles of your CD collection ? You could obviously make the list box wide enough to accommodate the widest string you expect, but that would not only look pretty bad, but also waste a great deal of space on the screen. -
Bluebeam Revu PDF Markup & Collaboration
Bluebeam Revu PDF Markup & Collaboration Bluebeam Revu Idaho Transportation Department 3311 W. State Street P.O. Box 7129 Boise, ID 83713 If you need assistance with Bluebeam, please contact the OTS Support Team: Bluebeam Contacts D1 Benjamin Daley (208) 772-8033 [email protected] D2 Janet Zarate (208) 799-4243 [email protected] D3 Marc Danley (208) 334-8389 [email protected] D4 James Bennett (208) 886-7818 [email protected] D5 Kelli Baker (208) 239-3363 [email protected] D6 Brad Richards (208) 745-5635 [email protected] Bridge Rick Jensen (208) 334-8589 [email protected] HQ Beau Hansen (208) 334-8494 [email protected] HQ Jeremy Hunting (208) 332-7167 [email protected] For More Information: ITD SharePoint CADD/ProjectWise CADD/ProjectWise/Bluebeam Helpful links: BlueBeam Training Materials BlueBeam Support BlueBeam Revu Basics BlueBeam Revu 2016 Tips and Tricks Collaborative Design Review in Bluebeam Studio Revision date: October 2017 ii Bluebeam Revu Idaho Transportation Department Introduction to Bluebeam Revu This course will teach you how to use Bluebeam Revu for your PDF markup and collaboration needs. Bluebeam Revu provides powerful and easy to use features for marking up Architecture, Engineering, and Construction (AEC) plan PDF documents. The Studio Session feature allows users from any location to participate in a collaborative review. Bluebeam makes use of Amazon Web Services (AWS), commonly referred to as the Amazon Cloud. This service will host the documents for the Studio Session. There are two roles within a Bluebeam Studio Session: initiator and participant. -
Eclipse Project Briefing Materials
[________________________] Eclipse project briefing materials. Copyright (c) 2002, 2003 IBM Corporation and others. All rights reserved. This content is made available to you by Eclipse.org under the terms and conditions of the Common Public License Version 1.0 ("CPL"), a copy of which is available at http://www.eclipse.org/legal/cpl-v10.html The most up-to-date briefing materials on the Eclipse project are found on the eclipse.org website at http://eclipse.org/eclipse/ 200303331 1 EclipseEclipse ProjectProject 200303331 3 Eclipse Project Aims ■ Provide open platform for application development tools – Run on a wide range of operating systems – GUI and non-GUI ■ Language-neutral – Permit unrestricted content types – HTML, Java, C, JSP, EJB, XML, GIF, … ■ Facilitate seamless tool integration – At UI and deeper – Add new tools to existing installed products ■ Attract community of tool developers – Including independent software vendors (ISVs) – Capitalize on popularity of Java for writing tools 200303331 4 Eclipse Overview Another Eclipse Platform Tool Java Workbench Help Development Tools JFace (JDT) SWT Team Your Tool Plug-in Workspace Development Debug Environment (PDE) Their Platform Runtime Tool Eclipse Project 200303331 5 Eclipse Origins ■ Eclipse created by OTI and IBM teams responsible for IDE products – IBM VisualAge/Smalltalk (Smalltalk IDE) – IBM VisualAge/Java (Java IDE) – IBM VisualAge/Micro Edition (Java IDE) ■ Initially staffed with 40 full-time developers ■ Geographically dispersed development teams – OTI Ottawa, OTI Minneapolis, -
Hyperion Interactive Reporting
HYPERION® INTERACTIVE REPORTING – SYSTEM 9 RELEASE 9.3.1 OBJECT MODEL AND DASHBOARD DEVELOPMENT SERVICES DEVELOPER’S GUIDE VOLUME I: DASHBOARD DESIGN GUIDE Interactive Reporting Object Model and Dashboard Development Services Developer’s Guide, 9.3.1 Copyright © 1996, 2007, Oracle and/or its affiliates. All rights reserved. Authors: Dan Montagne The Programs (which include both the software and documentation) contain proprietary information; they are provided under a license agreement containing restrictions on use and disclosure and are also protected by copyright, patent, and other intellectual and industrial property laws. Reverse engineering, disassembly, or decompilation of the Programs, except to the extent required to obtain interoperability with other independently created software or as specified by law, is prohibited. The information contained in this document is subject to change without notice. If you find any problems in the documentation, please report them to us in writing. This document is not warranted to be error-free. Except as may be expressly permitted in your license agreement for these Programs, no part of these Programs may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose. If the Programs are delivered to the United States Government or anyone licensing or using the Programs on behalf of the United States Government, the following notice is applicable: U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to -
1400.0 Nrcs Minnesota Workspaces And
NRCS MINNESOTA WORKSPACES AND CUSTOMIZATION 1400.0 The Civil 3D software utilizes workspaces to control the display of the work area, including drop-down menus, placement of toolbars and commands included in toolbars. Available Workspaces are selected from the drop-down list on the Workspaces toolbar. Several standard workspaces will be provided when the program is installed, and the procedure for configuring customized workspaces is covered below. 1. Customizing workspaces a. To make changes to a workspace, select the Customize command from the drop-down menu on the workspaces toolbar. b. This will bring up the Customize User Interface window. Selecting a workspace from the available list in the top left hand pane will display all of the setting that can be modified in the Workspace Contents pane in the upper right hand side of the window. A listing of all of the available commands is included in the lower left hand pane. Click on the Customize Workspace button in the Workspace Contents pane to begin modifying the selected workspace. Civil 3D 2012 1 Rev. 1/2013 1400.0 WORKSPACES AND CUSTOMIZATION NRCS MINNESOTA 2. Partial customization files a. Additional customization files can be loaded as partial customization files, which gives you access to additional commands and menus. You can add partial customization files by clicking on the Load partial customization file icon next to the customization file drop-down list. This icon will be inactivated if you are in the process of customizing a workspace, so you will need to click on the Done button in the Workspace Contents frame (see above) to exit the customization mode before you can load a partial customization file. -
UI Manager Properties
APPENDIX A UI Manager Properties THROUGHOUT THIS BOOK YOU'LL FIND TABLES that list the property names and data types for all the UIResource elements of specific Swing components. Although these tables serve to list all the information about a specific component, I fig ured it would be handy to also group all the information about property names in one place. With that in mind, Table A-1 provides a complete list of properties used by the predefined look and feel classes-Motif, Macintosh, Metal, and Windows provided with the Swing 1.1.1 release. The table indicates with an "X" which of the four look and feel classes uses a particular property. To change the default setting for any one of these properties, you need to notify the UIManager by storing a new setting in the lookup table of the UIManager. For instance, to change the default text for the "Yes" button on a JOptionPane, 11 you'd replace the 0ptionPane. yesButtonText II property with the new setting 11 11 UIManager. put ( 0ptionPane. yesButtonTextll, Si II);. Then, any component cre ated after the setting change will get the new value: 11 5i 11 .1fyou want a displayed component to get the new setting, you must call its updateUI () method. When you change the current look and feel, any custom settings you install may be lost. If the class of the property value setting implements the UIResource interface (an empty marker interface such as Serializable), then the setting will be replaced by the default setting of the look and feel. -
Revisiting Read Wear: Analysis, Design, and Evaluation
Revisiting Read Wear: Analysis, Design, and Evaluation of a Footprints Scrollbar Jason Alexander 1, Andy Cockburn 1, Stephen Fitchett 1, Carl Gutwin 2, Saul Greenberg 3 1 Dept. of Computer Science 2 Dept. of Computer Science 3 Dept. of Computer Science University of Canterbury University of Saskatchewan University of Calgary Christchurch, New Zealand Saskatoon, Canada Alberta, Canada {jason, andy, saf75} [email protected] [email protected] @cosc.canterbury.ac.nz ABSTRACT having attended to the thumb’s location during previous In this paper, we show that people frequently return to visits, remembering it, and reproducing it accurately. One previously-visited regions within their documents, and that or more of these activities can fail. In their comparison of scrollbars can be enhanced to ease this task. We analysed navigation in paper and electronic documents O’Hara and 120 days of activity logs from Microsoft Word and Adobe Sellen [25] observed that people use fingers to mark Reader. Our analysis shows that region revisitation is a document regions in paper documents for easy return, and common activity that can be supported with relatively short that equivalent methods are lacking when scrolling. They recency lists. This establishes an empirical foundation for conclude that scrolling is “irritatingly slow and distracting” the design of an enhanced scrollbar containing scrollbar and that people need “quicker, more effortless navigation” marks that help people return to previously visited [25], p.341. document regions. Two controlled experiments show that scrollbar marks decrease revisitation time, and that a large One way to improve support for revisitation is by number of marks can be used effectively. -
The Design, Use, and Performance of Edge-Scrolling Techniques Jonathan Aceituno, Sylvain Malacria, Philip Quinn, Nicolas Roussel, Andy Cockburn, Géry Casiez
The design, use, and performance of edge-scrolling techniques Jonathan Aceituno, Sylvain Malacria, Philip Quinn, Nicolas Roussel, Andy Cockburn, Géry Casiez To cite this version: Jonathan Aceituno, Sylvain Malacria, Philip Quinn, Nicolas Roussel, Andy Cockburn, et al.. The design, use, and performance of edge-scrolling techniques. International Journal of Human-Computer Studies, Elsevier, 2017, 97, pp.58 - 76. 10.1016/j.ijhcs.2016.08.001. hal-01624625 HAL Id: hal-01624625 https://hal.archives-ouvertes.fr/hal-01624625 Submitted on 2 Nov 2017 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. The design, use, and performance of edge-scrolling techniques J. Aceitunoa,b,∗, S. Malacriaa,c, P. Quinnc, N. Roussela, A. Cockburnc, G. Casiezb aInria Lille - Nord Europe, 40 avenue Halley, 59650 Villeneuve d'Ascq, France bUniversit´eLille 1, Cit´eScientifique, 59650 Villeneuve d'Ascq, France cDepartment of Computer Science and Software Engineering, University of Canterbury, Private Bag 4800, Christchurch, New Zealand Abstract Edge-scrolling techniques automatically scroll the viewport when the user points near its edge, enabling users to reach out-of-view targets during activities such as selection or drag-and-drop. Despite the prevalence of edge-scrolling techniques in desktop interfaces, there is little public research on their behaviour, use or performance.