3306 Engine The six-, turbocharged engine is built for power, reliability and economy.

Powerful performance. The 966F 1 Turbocharger enhances performance Easy maintenance. The engine can be Series II performs at full-rated gross and engine efficiency, especially at rebuilt for a second life. Caterpillar power of 175 kW (235 hp). The four- high altitudes. remanufactured parts are available to cycle design delivers long economically replace many 2 is a steel forging, power strokes and efficient fuel components. Some innovative carburized and quench hardened for combustion. The turbocharged maintenance features of the 3306 long-term durability. Caterpillar 3306 engine is precisely engine: engineered and stringently tested to 3 High-pressure direct injection fuel ■ Connecting rods can be removed maintain a tradition of quality. It does system provides excellent fuel through the tops of the cylinders. it all with profit-boosting atomization for unmatched fuel ■ Camshaft followers and pushrods can performance, heavy duty durability economy, reliability and durability. be easily replaced without removing and reliability, built-in serviceability the camshaft. 4 Full-length water cooled cylinder and excellent fuel economy. ■ Water pump can be serviced as a unit liners provide maximum heat or rebuilt. transfer. 5 Oil-cooled increase heat dissipation and promote longer life. Modular radiator cools efficiently. Grill swings out for easy repair or installation of individual modules and sight gauge allows for quick check of coolant level. Optional trash resistant radiator with 6 fins per inch is available. 4 Power Train The Cat¨ power train makes dependable performance a standard feature.

1 Heavy duty axles and brakes are 2 Optional limited-slip differentials and designed to last in all kinds of NoSPIN rear differential are available operating conditions. Planetary final to deliver maximum traction in low drives use full-floating bronze sleeve traction or inconsistent ground bearings in the planet and conditions. differential . Full-hydraulic wet Planetary power shift disc brakes are adjustment free and with automatic shift capability allows fully enclosed to lock out on-the-go shifting, while hydraulic contaminants. Patented Duo-Cone modulation cushions the shift and Seals between the axle shafts and reduces stress on components. Large housings keep lubrication in and dirt diameter, perimeter-mounted clutch out. Oscillating rear axle ensures plates are continuously oil-cooled for four-wheel ground contact for dependable, long life. traction and stability, even on rugged terrain. Transmission

Engine

Transfer Brakes, differential & final drives

5 Frame and Loader Linkage Superior construction means superior strength.

1 Full box-section frame absorbs shock 6 Cast cross tube provides extra and twisting forces while supporting rigidity and maintains pin 7 rigid component alignment. alignment. 2 Spread-hitch design provides 7 Z-bar loader linkage gives the 966F strength in the articulation area and Series II tremendous breakout force reduces stress on the hitch pins and in all materials. The streamlined roller bearings. The use of castings in design—with fewer pivot points and high stress areas distributes stress sealing to maintain pin lubrication— loads better. allows for longer maintenance intervals. Cast tilt lever and forged 3 35° center-point articulation allows tilt link efficiently transmit high cycling in tight quarters. breakout forces from the tilt cylinder. 4 Full four-plate loader tower provides Optional high lift design. An rigid mounting for lift arms, resists arrangement with longer lift arms and stress and protects hydraulic cylinders modified tilt cylinder is available for Double tapered and lines from damage by debris. increased reach and dump clearance. roller bearings on both upper 5 Lift arms are made of solid steel to and lower hitch stand up to any stress load.

6 Hydraulics Powerful hydraulics are the invisible force behind the loader’s muscle and flexibility.

High capacity lift. Quick hydraulics Automatic Ride Control. The 966F 1 Large-bore lift and tilt cylinders make it easy to lift heavy, full bucket features an optional automatic ride ensure efficient load handling. loads. The bucket automatically control system that uses a nitrogen-oil 2 Cat's XT-3 hydraulic hose is returns to a preset lift height and accumulator in line with hydraulic lift exceptionally strong and flexible. digging angle, which ensures cylinders as a shock absorber. In Reusable prolong the hose accuracy and cuts down on operator automatic, the system is activated assembly's life. distractions. when the speed exceeds 9.7 kph (6mph) and deactivated at speeds O-Ring Face Seals (ORFS) provide Smooth steering. Hydraulic steering below 9.7 kph (6 mph), resulting in positive, dry sealing. system with dedicated pump has better movement into the stockpile, automotive-type feel for precise, more efficient lifting and loading. comfortable control. Large-bore Automatic ride control also provides steering cylinders allow excellent a more controlled ride and greater maneuverability. payload retention. Collectively these benefits contribute to improved operator efficiency, lower operating cost and enhanced productivity.

7

1 Exceptional all-around visibility 6 Transmission neutralizer lockout reduces strain and fatigue, making switch enables the left or right brake operators more productive. pedal to be used as a brake/neutralizer or brake only. Switch is on the right 2 Caterpillar Monitoring System with hand console. electronic analog gauges is a highly effective and reliable diagnostic 7 Convenient low effort bucket controls system. As a warning system, it allow for precise bucket loading and constantly checks machine functions dumping. Optional third and and tells the operator when there’s a control are available. problem. Easy-to-read gauges display 8 New Contour Series Seat is fuel level, temperatures for coolant, designed for comfort and support. transmission and hydraulic oil, Seat cushions reduce pressure on the alternator output, machine speed, lower back and thighs while engine RPM and gear range. Also allowing unrestricted arm and leg displays hour meter, odometer and movement. optional digital speedometer readings. As a diagnostic system, it identifies 9 Built-in storage space is designed to conditions, shows current readings hold cups, lunch box, thermos and and plays back readings registered personal items. during recent operations. 10 Repositioned vents throughout the 3 Automatic shift control allows the cab keep fresh air flowing while operator to concentrate on the work, improving the cab’s heating, not gear selection. Preset factory shift cooling, defrost and defog points ensure each shift occurs at capability. optimum torque. A switch allows the Radio Ready means this cab includes operator to select either automatic or 12-volt converter (2-amp), speakers, manual shifting. The low-effort shift antenna, all wiring and brackets for control allows one-hand shifting for entertainment or communications speed or directional changes. radio installation. 4 Quick Gear Kickdown Button lets the Windshield washers/wipers are operator easily downshift to a lower standard features on front and rear gear. It's a convenient way to windows. Front wiper has downshift that saves time, increases intermittent speed capability and in- bucket fill factors and lowers cycle the-blade washer delivery system. times. Optional Payload Measurement 5 Steering column adjusts to multiple System offers on-the-go weighing to positions. The leather-like steering assist operators in loading trucks wheel and transmission control more accurately. provide a sure grip and comfortable feel. The horn is conveniently located in the center of the steering wheel.

9 Buckets A choice of 12 buckets lets you tailor the machine to the job.

Rugged design. All buckets are built with shell-tine construction that resists twisting and distortion. Replaceable, bolt-on wear plates protect the bucket bottom. Patented Cat Corner Guard Cutting Edge System protects the corners for long- term wear. General purpose and rock buckets— excellent for excavating, stockpiling and general purpose work 1 Bolt-on wear plates 2 Sloped floor 3 Straight, sharp side bar Penetration buckets—excellent for site preparation work 4 Full-width backdrag edge 5 Fore/aft wear strips 6 Flat floor 7 Curved, sharp side bar

10

Complete Customer Support When you buy a Cat machine, you also get Caterpillar’s total commitment to customer support.

Easy maintenance. In addition to the Parts availability. Most Cat parts are servicing features built into the immediately available from any engine (see page 4), the 966F Series dealer. Cat dealers rely on our II includes: worldwide computer network to find ■ Hinged doors for access to battery parts instantly and minimize your boxes. machine downtime. Many ■ Diagnostic connector to analyze components are economically electrical functions quickly. available as Caterpillar ■ Ground-level access to lubrication Remanufactured parts. points. Flexible financing. Your dealer can ■ Hydraulic pressure taps for checking arrange affordable financing for the hydraulic pressures. entire Caterpillar equipment line. Cat dealers are also available to help Talk to your dealer to learn how you manage your machine service. terms can be structured to meet your Ask about our preventive cash flow requirements. maintenance programs.

12 BSFC Power in Torque in 1.30 0.37 1.74 0.50 Nitrogen oxides(NO Carbon monoxide(CO) Hydrocarbons (HC) ■ ■ ■ emissions requirements: The 3306DITAmeetsthefollowing 6.0in. 4.75in. 152.4mm 120.7mm Exhaust emissions 638cuin. 10.5liters 220 Displacement 164 Stroke 220 220 220 Bore 164 164 Dimensions 228 164 170 ISO 9249 235 220 EEC 80/1269 175 ISO 3046-2 164 ISO 1585 DIN 70020 Flywheel power Gross power Ratings at2200RPM Four-stroke cycle,sixcylinder3306turbochargeddieselengine. Engine

LB/BHPHR Horsepower LB-FT Japan MOCAPRIL1997 US EPAJAN1996 EEC JUL1997 0.30 0.40 140 180 220 260 500 600 700 4010 8020 202400 2200 2000 1800 1600 1400 Engine R.P.M. x .56.23 8.35 ) Gross /W g/hp-hr g/kWh WHP kW Net ■ Power ratingconditions ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Features ■ ■ ■ ■ ■ 0 kPa(29.6") 100 conditions of25¡C(77¡F)and J1349standard based onSAE standard oilcooler standard etherstartingaid amp-hour batteries charging systemwith12-volt,100 direct-electric 24-voltstartingand compressor andpowersteeringpump gear drivenwaterpump,air induction-hardened, forgedcrankshaft deep-skirted castcylinderblock integrally castintakemanifold one-piece cylinderheaddesignwith tapered connectingrods spiral ground,stellitefacedvalves spray ground, taperedandcooledbyoil 3-ring aluminum-alloypistons,cam- pumps andvalves individual adjustment-freeinjection direct-injection fuelsystemwith ft (7500 no deratingrequiredupto2286m muffler, andlubricatingoilpump cleaner, waterpump,fuel equipped withfan,alternator,air flywheel powerratingsareforengine lb/gal) (7.001 fuel densityof838.9g/L (85¡F) (18,390 Btu/lb)whenusedat29¡C kJ/kg fuel hadLHVof42780 fuel API,16¡C(60¡F),gravity used 35¡ ) altitude 966F Series II ■ ■ 5.2 ■ ■ Features 8.3 4.5 1 7.3 Reverse 1 Forward 26.5-25 tires) Maximum travelspeeds(standard four speedsforwardandreverse. Planetary powershifttransmissionwith Transmission ■ converter single-stage, single-speedtorque direction single levertocontrolbothspeedand Quick GearKickdownSwitch automatic shiftcapability millyard/logging applications) is available(recommendedfor optional extremeservicetransmission specifications 3927.3 15.9 9.2 43.9 25.6 24.1 14.8 14.0 4 8.1 38.8 3 22.5 2 13.0 4 3 2 mhMPH km/h 13 Axles Brakes Final Drives Fixed front, oscillating rear (±13¡). Meets the following standards: OSHA, Planetary final drives consist of ring SAE J1473 DEC84, ISO 3450-1985. gears and planetary carrier assemblies. Features ■ maximum single-wheel rise and fall: Service brake features Features 495 mm (19.5") ■ full-hydraulic wet disc brakes ■ ring gears are pressed in and doweled ■ differentials, enclosed brakes and ■ completely enclosed and sealed to axle housings final drives included ■ adjustment-free ■ carrier assemblies include: ■ threaded nuts to set bearing pre-load ■ separate circuits for front and rear Ð planet gears with full-floating ■ Duo-Cone Seals between axle and axles bronze sleeve bearings housing ■ dual pedal braking system with Ð planet shafts ■ uses SAE 30W (oil change interval: switchable left pedal Ð retaining pins 2000 hours or 1 year) Parking brake features Ð bearings ■ mechanical, shoe-type brake Ð sun gear shafts ■ mounted on transmission output shaft Ð planetary carriers for manual operation Secondary brake features ■ Computerized Monitoring System alerts operator if pressure drops and automatically applies parking brake

Loader Hydraulic System Open-centered, interrupted series system with full-flow filtering. System is completely sealed. Pilot-operated controls.

Implement system, vane-type pump Hydraulic cycle time Output at 2092 RPM and Raise 7.1 6900 kPa (1000 psi) Dump 2.0 with SAE 10W oil at 66¡C (150¡F) 302 liters/min 79 gpm Lower, empty, float down 2.4 Relief valve setting 20 700 kPa 3000 psi Total 11.5 seconds Cylinders, double acting: lift, bore and stroke 178 x 759 mm 7.00 x 29.8" Features Cylinders, double acting: ■ completely enclosed system tilt, bore and stroke 210 x 535 mm 8.25 x 21.0" ■ low effort, pilot-operated controls ■ full-flow filtering Pilot system, vane-type pump ■ reusable couplings with O-Ring Face Output at 2092 RPM and Seals 6900 kPa (1000 psi) with SAE 10W oil at 66¡C (150¡F) 21.0 liters/min 5.5 gpm Relief valve setting 2525 kPa 366 psi

14 966F Series II specifications Cab Tires Steering Caterpillar cab and Rollover Protective Tubeless, nylon, loader design tires. Full hydraulic power steering. Structure (ROPS) are standard in North America, Europe and Japan. Choice of Ratings ■ 26.5-25, 14 PR (L-2) standard Minimum turning radius Features ■ 26.5-25, 20 PR (L-3) (over tire) 6779 mm (22'3") ■ meets OSHA and MSHA limits for ■ 26.5-R25 GP-2B(L-2/3) radial Steering angle, each direction 35¡ operator sound exposure with doors ■ 26.5-R25 XHA (L-3) radial Hydraulic output at 2092 RPM and 6900 and windows closed (according to ■ 23.5-25, 16 PR (L-2) kPa (1000 psi) ANSI/SAE J1166 JUL87) ■ 23.5-25, 16 PR (L-3) 189 liters/min (50 gpm) ■ ROPS meets the following criteria: ■ 23.5-25, 24 PR (L-3) Relief valve Ð SAE J394 ■ 23.5-R25 GP-2B (L-2/3) radial setting 20 700 kPa (3000 psi) Ð SAE 1040 APR88 ■ 23.5-R25 XHA (L-3) radial Ð ISO 3471-1986 Note ■ also meets the following criteria for In certain applications (such as load-and- Features Falling Objects Protective Structure: carry work) the loader's productive ■ center-point frame articulation Ð SAE J231 JAN81 capabilities might exceed the tires' ■ hydraulic neutralizer steering stops Ð ISO 3449-1984 tonnes-km/h (ton-MPH) capabilities. ■ dedicated hydraulic steering pump ■ Note Caterpillar recommends that you consult front and rear wheels track When properly installed and maintained, a tire supplier to evaluate all conditions ■ flow-amplified, open-center, pressure- the cab offered by Caterpillar when before selecting a tire model. Other compensated system tested with doors and windows closed special tires are available on request. ■ steering-wheel operated metering according to ANSI/SAE J1166 MAY90, pump controls flow to steering meets OSHA and MSHA requirements cylinders for operator sound exposure limits in ■ full-flow filtering effect at time of manufacture. The ■ adjustable steering column operator sound pressure level is 75 dB(A) when measured per ISO 6394 or 86/662/EEC.

Bucket Controls Service Refill Capacities Pilot-operated lift and tilt circuits. L Gallons Fuel tank 377 99.6 Lift circuit features Cooling system 41 11.0 ■ four positions: raise, hold, lower and Crankcase 28 7.3 float Transmission 59 15.0 ■ can adjust automatic kickout from Differentials and final drives horizontal to full lift front 47 12.4 Tilt circuit features ■ three positions: tilt back, hold, and rear 47 12.4 dump Hydraulic system ■ can adjust automatic bucket positioner (including tank) 205 54.2 to desired loading angle Hydraulic tank 140 37.0 ■ does not require visual spotting Controls ■ two-lever control standard ■ optional single-lever control available ■ both types of controls available with three-valve hydraulic system

966F Series II specifications 15 Operation Specifications

General purpose bucket

Rated bucket capacity m3 3.8 3.6 3.5 yd3 5.0 4.75 4.5 Bolt-on Teeth & Teeth Bolt-on Teeth & Teeth Bolt-on Teeth & edges segments edges segments edges segments

Struck capacity m3 3.25 3.25 3.04 3.18 3.18 2.76 2.91 2.91 yd3 4.26 4.26 3.95 4.17 4.17 3.59 3.81 3.81 Width mm 3059 3107 3107 3059 3107 3107 3059 3107 in 120 122 122 120 122 122 120 122 Dump clearance at full mm 2981 2845 2845 2981 2845 2845 3055 2921 lift and 45¡ discharge ft/in 9'9" 9'4" 9'4" 9'9" 9'4" 9'4" 10'0" 9'7" Reach at full lift mm 1275 1398 1398 1275 1398 1398 1227 1352 and 45¡ discharge ft/in 4'2" 4'7" 4'7" 4'2" 4'7" 4'7" 4'0" 4'5" Reach at 45¡ discharge mm 1832 1892 1892 1832 1892 1892 1814 1883 and 2130 mm (7 ft 0 in) clearance ft/in 6'0" 6'2" 6'2" 6'0" 6'2" 6'2" 5'11" 6'2" Reach with lift arms mm 2583 2764 2764 2583 2764 2764 2493 2674 horizontal and bucket level ft/in 8'6" 9'1" 9'1" 8'6" 9'1" 9'1" 8'2" 8'9" Digging depth mm 82 82 52 82 82 52 82 82 in 3.2 3.2 2.0 3.2 3.2 2.0 3.2 3.2 Overall length mm 8303 8506 8506 8213 8506 8506 8213 8416 ft/in 27'3" 27'11" 27'11" 26'11" 27'11" 27'11" 26'11" 27'7" Overall height with bucket mm 5589 5589 5589 5589 5589 5589 5515 5515 at full raise ft/in 18'4" 18'4" 18'4" 18'4" 18'4" 18'4" 18'1" 18'1" Loader clearance circle with mm 14 722 14 876 14 876 14 722 14 876 14 876 14 674 14 828 bucket in carry position ft/in 48'4" 48'10" 48'10" 48'4" 48'10" 48'10" 48'2" 48'8" Static tipping load straight** kg 14 130 14 372 14 275 14 094 13 960 14 293 14 249 14 056 lb 31,157 31,690 31,476 31,077 30,782 31,516 31,419 30,993 Static tipping load kg 12 854 13 057 12 987 12 818 12 684 13 005 12 966 12 772 full 35¡ turn** lb 28,343 28,791 28,636 28,264 27,968 28,676 28,590 28,162 Breakout force*** kN 201.0 200.2 215.5 201.1 201.0 215.9 216.6 214.9 lb 45,187 45,007 48,446 45,209 45,187 48,536 48,693 48,311 Operating weight** kg 20 732 20 905 20 751 20 725 20 898 20 744 20 672 20 845 lb 45,714 46,096 45,756 45,699 46,080 45,741 45,582 45,963

* All buckets shown can be used on high lift arrangement. High lift column shows changes in specifications from standard lift to high lift. Add or subtract as indicated to or from specifications given for appropriate bucket to calculate high lift specifications. ** Static tipping load and operating weight shown include sound-suppression cab and ROPS, 26.5-25 tires, full fuel tank, coolant, lubricants and operator. *** Measured 102 mm (4.0"): behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732c.

16 966F Series ll specifications Bucket size Bucket SizeSelector . 4.3 5.6 .54.0 5.25 3.8 5.0 yd 3 5644,8 5734,3 +2645 +1202 45,939 -24.5 -5,511 20834 45,793 197.0 44,325 20768 -1220 44,123 196.1 -554 45,886 28,676 20810 -1030 13005 45,624 +9.9" 28,841 48,356 -468 20 691 31,538 215.1 13080 +23.6" 14303 52,515 49'0" 31,701 +600 +251 28,440 233.6 14377 same 12898 18'5" same 48'5" 14926 28,967 +22.7" 5610 +576 31,276 13 137 14748 18'5" 14184 2.0 31,825 28'4" 48'10" 5610 52 8630 +18.3" 14 433 14880 27'3" 48'8" 18'4" 8311 2.0 +465 9'5" +19.6" 52 14 828 5589 18'1" 22'10" 2877 +1.5" +497 8'7" 5515 6'6" 8491 2.0 27'7" 2616 52 1995 +37 5'0" +23.6" 8416 6'4" 9'2" 2.0 1930 1523 +600 4'5" 52 9'2" 2786 5'10" 8'9" 1358 2801 121 9'11" 2674 1774 4'4" 6'2" 3016 3085 121 1883 4.51 1318 9'1" 2.94 4'5" 3085 1352 4.51 2769 123 2.94 9'7" 2921 3128 4.09 122 3.12 3107 3.62 4.5 3.5 2.76 4.75 3.6 4.25 3.3 lb/yd kg/m et et Noteeth Teeth Teeth m 3 3 3

2300 1300 Material density

2300 bucket Penetration 1400 2400

2500 1500

2600

2700 1600 HighLift Rock bucket

2800 1700 2900 teeth strap Bottom 3000 1800 Maximum load Optimum Under utilized 3100

3200 1900 same same same same same same Arrangement* 3300 2000 3400

3500 2100 Granite 3305 Earth 2394 1960 1420 Decomposed rock Clay andgravel Clay Bauxite, Kaolin Basalt hl 202107 1250 2546 1510 Stone Slag Shale Sandstone Sand andgravel Sand andclay Sand Limestone Gypsum Gravel Typical materialdensities-loose rkn16 2799 1660 2698 2546 1600 1510 2596 2647 2394 2900 1540 3305 1570 2799 1420 1720 2495 1960 broken 1660 1480 wet, excavated 2799 dry, packed 1660 25% rock,75%earth 50% rock,earth 75% rock,25%earth wet dry wet dry natural bed rse 602698 2950 1600 1750 3102 2900 1840 1720 2698 3102 1600 2849 1840 crushed 2394 1690 broken 2596 1420 2596 1540 1540 2698 wet 3052 dry 1600 1810 loose 2546 3254 wet 1510 3406 damp 2849 dry, loose 1930 2020 2690 crushed broken crushed broken wet, 6-50mm(.2-2") dry, 6-50mm(.2-2") dry pitrun 966F Series II specifications kg/m 3 lb/yd 17 3 Dimensions All dimensions are approximate. ➤ ➤ ➤ ➤ ➤ ➤ ➤

➤ 4116 mm 3425 mm ➤ (13' 6") (11'3") 2455 mm (8"1") ➤ 3406 mm 43.9¡ (11'2") 40¡

➤ ➤

➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ 787 mm ➤ 476 mm 310 mm 470 mm (2'7") (18.7") ➤ 1675 mm ➤ ➤ 864 mm ➤ (12.2") (18.5") ◆ Dimensions vary with (5'6") (2'10") bucket. Refer to operating ➤ 2164 mm ➤ ➤ 3350 mm ➤ (7'1") (11'0") specifications chart on page 16. ➤ ➤

Tread width for all tires 2200 mm (86.6") Change in Ground vertical Width over tires clearance dimensions mm inches mm inches mm inches 26.5-25, 14 PR (L-2) standard 2942 115.9 476 18.7 — —

26.5-25, 20 PR (L-3) 2949 116.1 497 19.6 +21 +0.8 26.5-R25 GP-2B (L-2/3) radial 2938 115.6 497 19.6 +21 +0.8 26.5-R25 XHA (L-3) radial 2940 115.7 482 19.0 +6 +0.2 23.5-25, 16 PR (L-2) 2865 112.8 437 17.2 -39 -1.5 23.5-25, 16 PR (L-3) 2862 112.7 434 17.1 -42 -1.7 23.5-25, 24 PR (L-3) 2862 112.7 434 17.1 -42 -1.7 23.5-R25 GP-2B (L-2/3) radial 2875 113.2 438 17.2 -38 -1.5 23.5-R25 XHA (L-3) radial 2877 113.3 419 16.5 -57 -2.2

Supplemental Specifications

Change in Operating Change in Articulated Weight Static Tipping Load kg lb kg lb Remove cab only, ROPS remains -177 -390 -150 -331 26.5-25, 20 PR (L-3) +350 +772 +234 +516 26.5-R25, GP-2B, (L-2/3) radial +526 +1160 +352 +776 26.5-R25, XHA (L-3) radial +561 +1237 +376 +829 23.5-25, 16 PR (L-2) -419 -924 -281 -620 23.5-25, 16 PR (L-3) -257 -567 -172 -379 23.5-25, 24 PR (L-3) -130 -287 -88 -194 23.5-R25, GP-2B (L2/3) radial -103 -227 -69 -152 Note: Tire options 23.5 R25, XHA (L-3) radial -19 -42 -13 -29 include tires and Tire ballast 23.5-25 bias ply tires +752 +1658 +1007 +2220 rims. Tire ballast 26.5-25 bias ply tires +1516 +3342 +2032 +4481

18 966F Series II specifications Standard Equipment Standard and optional equipment may vary. Consult your Caterpillar dealer for specifics.

Alternator (50-amp) Fenders Seat, suspension (fully adjustable) Automatic bucket positioner Gauges (coolant temperature, fuel Seat , retractable Automatic lift kickout level, tachometer, speedometer) Sight gauge (for engine coolant and Back up alarm Heater/defroster/pressurizer hydraulic tank) Batteries (two 12-volt, 100 amp-hour) Horn, electric Starting and charging system (24-volt) Brake system (service, parking, Indicators (engine air filter and service Tires (26.5-25) 14 PR (L-2) secondary) hour meter) Windshield washers/wipers (front and Cab with sound suppression, canopy Key (single key for cab and access rear), front intermittent and rollover protective structure doors) (ROPS) Lights (front and rear), Halogen Computerized Monitoring System * Lock (hydraulic implement control *Functions analyzed by Computerized Coolers (engine oil, hydraulic oil and levers) Monitoring System transmission oil) Muffler Category I: Fuel level Diagnostic connector Radiator, multi-row modular Drawbar hitch pin Rearview mirrors, interior Category II: Coolant, hydraulic oil and transmission oil temperatures Category III: Engine oil and brake air pressures, parking brake engaged, supplemental steering if so equipped, low hydraulic oil level indicator.

Optional Equipment With approximate changes in operating weights.

kg lb kg lb Air conditioning (R134a Refrigerant) 73 161 Seat, air suspension 32 71 Alternator (75 amp) 0 0 Signal lights, directional 10 22 Axle seal guard 10 21 Single lever bucket controls, lift and tilt 0 0 Brake Oil Cooler Starting aids Buckets see page 16 Engine coolant heater, 120-volt 1.4 3 Cab removed, ROPS remains -177 -390 Receptacle, 120-volt 1.4 3 Differentials: Steering, supplemental 122 269 NoSpin -2 -4 Tires see pages 15 & 18 Limited slip 16.8 37 Waste handling arrangement — — Ether starting aid, canister not included Field installed attachments and kits: Extreme service transmission 18 40 Guard, crankcase Fender Extension Package Guard, power train Flexxaire fan 23 50 Engine coolant heater, 120-volt Guards: Lighting system, warning (rotating beacon) Crankcase 45 99 Mirrors rearview Power train 102 224 Emergency starting receptacle Hydraulic arrangement, three valve 91 200 Radio, AM/FM cassette Logging arrangement 130 287 (fixed mounting and quick release versions) Mirrors, outside mounted 28 62 Payload Measurement System kit Millyard and woodchip arrangement — — Ride Control kit Payload Measurement System 26 57 Prelube 42 mt kit Ride Control System 91 200 Flexxaire fan kit

966F Series II specifications 19