DOCSLIB.ORG

Shure Pickups and Phono Cartridges 5.73 9.55 RCA Phono Components

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Shure Pickups and Phono Cartridges 5.73 9.55 RCA Phono Components Shure Pickups and Phono Cartridges RCA Phono Components Crystal Pickups for Standard and Microgroove Records Replacement Cartridges Fig. K. TYPE 9890 MAGIC TONE CELL CRYS- Fig. A. GUDER MODEL 99DV. Lightweight Fig. B. MODEL 92U ALL -PURPOSE PICKUP. pickup standard Supplied with Unipoint W66B cartridge TAL CARTRIDGE. For cartridge replacement dual -voltage crystal for in 69 RCA models. 78 rpm records. Replaces Models 93A and and all- purpose osmium needle. Standard including: 6QU, 7QV5. F8. U9. l'10, VA21, 0 -50. U -50, Q(156C, 96A and balanced pro- output. 2.3 v., MG output. 2 v. Needle pickups. Curved to R60. QÚ68, vide optimum tracking. Furnished with pressure. 8 grams. Response. to 4.500 R93F, 8100, V100, V1ol. RIO3S, V105. and Radiola 560P. Has re- plug -in condenser; output is 2 v. with con- cycles. Shpg. wt., 9 oz. placeable sapphire -tip stylus. Output. 11/2 denser. and 4 v. without. Employs new 65 R 317. List. $9.75. NET... 5.73 volts. Shure %V78 cartridge (see below). Response. With hardware and full installation in- structions. Sbpg. wt., S oz. to 6000 cycles. Needle pressure. 11/2 oz. Fig. C. MODEL 901D PICKUP WITH TURN- Uses any conventional -shank phono needle. OVER CARTRIDGE. For standard and MG 65 R 269. List. $7.80. NET 4.59 With instructions; less stylus. Shpg. wt., records of up to 12'. With Shure W22AB 1í/z lbs. turnover crystal "vertical drive" cartridge; Fig. L. TYPE 70338 -A SILENT SAPPHIRE CAR- high needle Point compliance, low mass. TRIDGE. Crystal cartridge 78 R List, NET for standard 65 589. $8.50. 5.00 Lightweight, die -cast aluminum arm is rpm records. For modernization of old Fig. S. MODEL 92H STANDARD PICKUP. For curved and balanced to minimize tracking RCA and many other radio - phonos. Inter- 78 rpm records. With W42H cartridge. error. With .001' sapphire and .0027' changeable with 70 different crystal car- Response, to 5.000 cycles. Supplied less osmium needle. Response, to 10.000 cycles. tridges. Has replaceable sapphire -tip needle; needle (see page 43). Shpg. wt.. 9 oz. Pressure. 7 grams. Shpg. wt.. 1 lb. "bumpers" protect needle. Minimum needle 65 R 316. List. $5.50. NET 3.23 65 R 31 1. List. $16.25. NET 9.55 chatter and surface noise. Output, 11/2 volts. With mounting hardware and instructions. Shure Replace ment Cartridges Wt., 5 oz. High-quality cartridges for all popular "llumi- Seal" type, ideal for tropical areas. 65 R 270. List. $7.25. NET 4.26 record players. '.001" osmium needle. tAll- All crystal type except WC31AR. WC24. purpose .002' sapphire needle. 1.002' os- WC24 -T and WC36B, which are ceramic Fig. M. TYPE 77779 CRYSTAL CARTRIDGE. mium needle. ".001' sapphire and :0027' (high resistance to heat and humidity). For cartridge replacement in RCA models: osmium needle. ft.001' and .0027' osmium W2IF supplied with .453' mount for Oak 6T84, 6T86. 6T87, 9T89, A91. and A108. needles. All others less needle. W6OHS is changers. Av. shpg. wt.. 3 oz. With stylus. Shpg. wt.. 5 oz. 65 R 255. List. $9.20. NET 5.41 For Stando rd Records Fig. N. TYPE 74067 CRYSTAL Fig. D. MODEL W78. New. dual -voltage, Fig. J. MODEL W70. Exact replacement for CARTRIDGE. For dual- weight cartridge. Replaces \V42B. 5%chuter- Racine CX cartridges. High out- cartridge replacement in RCA models: W42BH, W42H, W56A. WS7A, W58A and put. Flange, clip or bracket mtg. For MG 9JY. 9JYM, 9EY3. 9EYM3. 9V7. 9EY35, W59A cartridges over 9EY36, 9Y5I . 9W101, 9W 102. 9W 103. and 100 mfrs. types. and standard. Output. 3.5 v. Response to 9W105, 9TW333, With plug -in condenser; output with con- 5000 cps. Less stylus. Pressure. 16 grams. 9TW390, 45J, and 45EY. denser, 2 v.; without. 4 v. Includes acces- With pin jacks. With stylus. Shpg. wt.. 5 oz. 65 R 253. List, $6.40. NET sory weight. Weighs 25 grams with wt.; 12 65 R 592. List, $4.95. NET 2.91 3 76 grams without. Needle pressure. 1 oz. Response. to 6000 cycles. Less stylus. Fig. G.MODEL W56N. Playback- cutter type TYPE 75575 CRYSTAL CARTRIDGE. (Not il- lustrated.) For cartridge replacement in R List. NET (with stylus) for most Wilcox -Gay record- 65 590. $5.55. 3.26 RCA models: 2T81. 6T86 and 9Y510. ers. Pressure. 1 oz. Output. 4.3 v. Re- sponse. to 10,000 cyc. With stylus. Shpg. wt.. 5 oz. Fig. G. MODEL W68. New, muted -stylus car- 65 R 349. List, NET 65 R 254. List, $6.40. NET 3 76 tridge. Dual weight. Replaces W60Á. $8.50. 5 00 W6OB and W6113 cartidges. With .003' Fig. G. MODEL W6OHS. With .0027' osmium TYPE 38610 CRYSTAL CARTRIDGE. (Not il- osmium needle. Output, 1.6 v. Response, stylus. Pressure, 1 oz. Output, 1.8 v. Resp. lustrated.) Exact replacement in RCA to 4500 cycles. Pressure, 1 oz. to 4500 cyc. models: V135. V140, V175, V209. V210. 65 R 591. List. $7.50. NET 4.41 65 R 363. List, $8.50. NET 5 00 VHR212, and Radiola 566P. Permanent stylus. With leads. Shpg. wt.. 4 oz. For Microgroove Records 65 R 268. List, $6.15. NET 3.62 Stock No. Modal Fig. List NET Pressure Output V. Response to RCA Phono Switches 65 R 331 W21F F 7.75 4.56 6 gm. 1.5 10,000 cps Fig. O. TYPE 240X1 RADIO -PHONO SWITCH. 65 R 364* WS3MG D 8.50 5.00 6 gm. 1.3 8,500 cps For operation of record players through 65 R 332* W31AR 1 6.50 3.82 7 gm. 2.1 7,500 cps radio receivers without phono inputs. Per - R 1 mita instant change -over from radio to 65 333* WC31AR 6.50 3.82 7 gm. .87 I 7,500 cps phonograph. Does not introduce hum or For Standard and Microgroove -Dual-Stylus Turnover Type affect tone. Neat back -of- cabinet mount- 65 R 342** W22AB E 9.50 5.59 8 gm. 10.000 cps ing. Supplied complete with 15' length of shielded cable. phono plug, 65 R 321 WC24 E 8.75 5.14 8 gm. 7,000 cps jack and in- structions. Shpg. wt.. 6 oz. , 65 R 32011 WC24-T H 9.25 5.44 8 gm. 7.000 cps 69 R 505. List. $2.50. NET 1.47 65 R 33811 W22AB-T H 10.00 5.88 8 gm. 10.000 cps For Standard and Microgroove- Single -Stylas Type Fig. P. TYPE 202W1 RECORD PLAYER SE- LECTOR SWITCH. Simplifies using two rec- 65 R 3451 W26A F 8.50 5.00 8 gm. .87 & 1.0 8,000 cps ord players with one radio or amplifier. 65 R 3461 W26B F 7.50 4.41 8 gm. .87 & 1.0 8,000 cps Excellent for radio -phono combinations to 65 R 3481 W66B G 7.00 4.12 8 gm. 2.0 & 2.3 4,500 cps which an external 45 rpm player has been 65 R 3341 W36B I 6.50 3.82 9 gm. 2.3 & 2.5 7,000 cps added. Provides easy change -over from one player 65 R 3351 WC36B I 6.50 3.82 9 gnu. .87 & .92 7,000 cps to the other. In metal case for con- venient back -of- cabinet mounting. Has 37 R 041. PHONOGRAPH PICKUP CARTRIDGE REPLACEMENT MANUAL. I.ists over 1.500 pho- jack for each record player, cable with nographs. radio -phono combinations and radio-TV- piton combinations. In alphabetical plug to fit 3 -pin type phono input. and order by manufacturer with Shure replacement cartridge number. Send for one with your adapter plug to fit standard phono input. next order. NO CHARGE. Shpg. wt.. 6 oz. For complete listing of needles for above cartridges, see page 43. 69 R 506. List. $5.65. NET...... .. 3.33 Allied Radio Corporation, 100 N. Western Ave., Chicago 80, Illinois 41 .
Load more

Recommended publications
  • Shure Professional Products Catalog Circa 1973
    MICROPHONES, COMPONENTS • CARTRtDGES • ACCESSORIES H www.SteamPoweredRadio.Com H s t-t LJ ~ E:: professbrol mk=rophones and components in octior AUDIO RICHMOND, VIRGINIA Al both convenhons. Shure M67 Microphone Mixers and ALPHA M675 Broadcast Production Masters saw strenuous duty ,n When you Q\11111 and operate the hrst 16-track professional the vaned ac1tvI1Ies of the Broadcast Audio Pool dunno recordmg studio In your entire state. you want to make sure coverage ot press contarencas and comm,nea heanngs that your sound equipment Is of the highest quality, relIabIl- 1ty, and versatility. During the Oamocrahc Convant1on. Shure SM61 Profes­ To the owners of Alpha Audio ,n Richmond. V1rglnIa. this sional Microphones were v,s,ble ,n the hands ot NBC floor means that Shure products w,11 be an mtegral pan of the reporters in the convention hall of Alpha s1ud10's electronic equipment Nearly two-thirds When the Republicans convened ,n August. special Shure Audio's microphones are Shure products Unidynes were on prominent and conhnuous display from Even though Alpha Audio has four brands of microphones their important pos,1Ion on the speaker's rostrum Shure for performers to choose from. Iha Shure rrt0del s are used SM6t's were used by floor commentators for both NBC and the most. accordmg to Nick Colleran. president of Alpha the MJlual Broadcasting Network Audio Oefagahon microphones at the Rapubhcan Convention ''Wa have two SM50's that we use on bass drums," Colleran were also Shure SM61 s with spac,al stand mountmgs And repons ''We have two SM53's tor vocals, electnc bass, behind the scenes.
    [Show full text]
  • E.1Ineïs' Jo Ujial
    THE BROADCAST ENGINEERS' JOUIRNA1. Ed. Stolzenberger, Editor Sec. 562, P. L. & R. 110.03 01st Avenue Richmond 11111 18, N. Y. U. S. POSTAGE Postmaster: If undeliverable for any reason, PAID notify sender, stating reason, on form 3547, postage for which Is guaranteed. F A GEHRES WGBF-ti11EßA New York, N. Y. 2232 E POWELL Permit No. 2961 EVANSVILI.E 14 IND 5151 E.1INEÏS' JO UJIAL k ' NABET National Counci Meeting: Detroit Oct. 4-8 Nie 4 NABET'S Position in TV: - NABET Intends to Maintain and Defend its Legal TV Jurisdiction Established Thru IO Years Practice S''e Page 5 VOL. 15, No. 9 SEPTEMBER, 1948 OFFII'IA1, PUBLICATION OF N. A. B. E. T. NAT'L ASS'N of BROADCAST ENGINEERS and TECHNICIANS www.americanradiohistory.com www.americanradiohistory.com REAR 150° tao° 150° 140° Broadcast Radio Engineers who want this SUPER-CARDIOID D specify - - - CARDIOID FRONT this because the Shure Super-Cardioid Broadcast Dy- namic Microphone has a super- cardioid pickup pattern which reduces the pickup of unwanted random noise en- ergy by 73%. It is twice as unidirectional as the cardioid. In the super-cardioid pattern, the ratio of front -to -rear pickup is 14 to 1-in the cardioid, 7 to 1. There is a wide, useful pickup angle at the front of the microphone while the rear response is down of the order of 15 db over a broad range of frequencies. Reverberation energy pickup is de- creased over two - thirds. The microphone can be placed close to the reflecting surfaces without objectionable effects if the rear side of the microphone is toward the reflecting surface.
    [Show full text]
  • The Shure Unidyne Microphone Story Download
    N I D Y N U E THE SHURE 55 SERIES MICROPHONES: Setting the Standard of Performance S Y T O R ® At any given moment, people in all corners of Today, we offer a variety of audio products the globe are relying upon Shure products to ranging from wired and wireless microphone communicate, entertain, and educate. If you have systems to mixers and accessories. Our an active interest in any sector of the audio world, components perform in touring sound, broad- chances are you know and trust the Shure name. cast, installed sound, and studio recording Our founder, S.N. Shure, developed our applications to name but a few. company around a set of ethical I D Y Throughout a good part of N N E business principles. The fact U our history, one series of prod- that Shure Brothers has ucts has remained in our entered its eighth decade catalog longer than any of continuous opera- others. Widely recog- tion is a testament to nized the world over, the soundness of INTRODUCTION they have come to be these principles. synonymous with the Though we mourn his name Shure. These passing, Mr. Shure’s products are the 55 values and philosophy Series of microphones. remain with us, and are In presenting this rich and S Y reflected in the products and T O R fascinating history of the 55 Series, service we provide to our valued customers. Shure would like to offer a sincere note of Our associates are trained and truly believe thanks to all of you who have faithfully stood in Total Quality manufacturing techniques.
    [Show full text]
  • SCM820 Digital Intellimix Automatic Mixer
    SCM820 SCM820 Digital IntelliMix® Automatic Mixer The Shure digital automatic mixer, SCM820, user guide. Version: 4.0 (2021-C) Shure Incorporated Table of Contents Networking 27 SCM820 SCM820 Digital IntelliMix® Automatic Mixer 4 Network Overview 28 Digital Audio Networking 29 Overview 4 IntelliMix® Operating Principles 4 Dante Software by Audinate 34 Mixer Modes 4 Dante Controller 34 Dual Mixer Operation 5 Dante Virtual Soundcard 34 DFR and Audio Processing 5 Application Examples and Advanced Mixer Settings 34 Model Variations 5 Creating a Link Group 34 Hardware Interface 6 Integrating with Other Systems 35 Front Panel 6 Advanced Mixer Settings 36 Rear Panel 8 Web conferencing 37 Signal Path Diagram 11 Digital Feedback Reduction (DFR) 38 Operating the Mixer 12 Function 38 Front Panel Modes 12 Basic DFR Setup 38 Audio Mute and Bypass 13 Filter Width 39 Monitoring 13 SCM820 Application 39 SCM820 Application 15 Navigation Bar 40 System Requirements 16 Input Tab 41 Accessing the SCM820 application 16 Intellimix Tab 43 Digital Feedback Reduction (DFR) Tab 45 Installation 17 Output Tab 46 Power 17 Preferences Tab 47 Rackmounting 17 Typical Audio Connections 18 Troubleshooting 49 Configuring the Inputs and Outputs 19 Front-Panel Error Messages 52 Setting IntelliMix 23 Accessories 52 Mixer Mode Descriptions 23 Furnished Accessories 52 IntelliMix Parameters 26 Specifications 53 Selecting the Mixer Mode 26 IP Ports and Protocols 56 Single or Dual Mixer Operation 27 Connector Diagrams 57 2/59 Shure Incorporated IMPORTANT SAFETY INSTRUCTIONS 57 Information to the user 59 Patent Notice 59 Important Product Information 58 3/59 Shure Incorporated SCM820 SCM820 Digital IntelliMix® Automatic Mixer Overview The Shure SCM820 is an 8-channel digital automatic mixer designed for use in speech applications, including sound reinforce- ment, broadcasting and audio recording.
    [Show full text]
  • CASE STUDY: Shure Incorporated
    CASE STUDY: Ensuring Optimal Acoustics for Employees and Visiting Customers Shure Incorporated Challenge Ensuring Good Acoustics for Employees, Customers, and Partners As an audio company, we knew how important Located just four and a half blocks from the site of the original Shure Loop office, Shure Chicago City Center is designed to welcome up to 150 Shure it would be to have employees across sales, marketing, customer service and market development. It’s also home to their exciting new Customer Experience Center. Designed good acoustics in to showcase a wide variety of Shure technology in a real-world environment our new office space. to customers and integrators, the Customer Experience Center features a full range of Shure products in a functional evaluation environment. Sound masking from The new office occupies an entire floor of The National Building in Chicago’s Cambridge Sound Loop district. Built in 1906, The National had extremely high ceilings, which clearly would affect the acoustics. The Customer Experience Center occupies Management ensures one corner of the space, the rest of the space is occupied by the sales, a comfortable working marketing, and tech support teams in a collection of low-partition cubicles, private offices, conference rooms, and open-office collaborative spaces. environment for both our It was imperative that cross talk from the office space did not interfere with employees and visiting demos occurring in the Customer Experience Center. Additionally, it was important that employees could focus on individual tasks without overhearing customers. It really other conversations throughout the space, and that they could also have works.
    [Show full text]
  • Frank Sinatra Part 22 of 29
    FREEDOM OF INFORMATION AND PRIVACY ACTS SUBJECT: FRANK SINATRA Los Angeles le:100-41413 Secti0n:3 FEDERAL BUREAU OF INVESTIGATION THE BEST COPY OBTAINABLE IS INCLUDED IN THE REPRODUCTION OF DOCUIVIENTS. PAGES INCLUDED THAT ARE BLURRED, LIGHT, OR OTHERWISE DIFFICULT TO READ ARE THE RESULT OF THE CONDITION OF THE ORIGINAL DOCUMENT. NO BETTER COPY CAN BE REPRODUCED. Freedom of Information and Privacy Acts Release of Subject: Frank Sinatra File #: LA 100-41413 Section 3 o"-~"'n -Q Tor v v ii fr "r Q' 0'K1 IF 9"J "I"l" Federal Bureauof Investigation ex i 1 A-l5 4§a.ar.|.lQ aua 92nl92. luuunnn -....._-...._ I inatra Ties, Can To Frank Sinatra wants out from under mt clan tag description, mostly by columnists, in referring to professional private associations of such cronies as Peter Lawford, Sammy D_BVl.l. Jr., Dean _Ma1-tin, etc., etc. _Smger-actor made move to bury the tag yesterday 1n s statement which said: ' . - - .'_ -' Au far as I know, the various guilds that are part of my profo-.j sic-rel life are the only organized groups to which l belong. The clan- is a figment of sorneone's imagination. Naturally, people in Hollywood, Socialize with friends as they do in any community, but we do not. gather together in childish fraternities as some people would like to itthink. stuck Life with magazine everyone coined except the the phrase, peoplewho The are Clan, supposed in an to article, belong andto it. There is no such entity as the c an and there never has been.
    [Show full text]
  • Shure Again Delivers Flawless Wireless at 57Th Annual GRAMMY® Awards
    Contact: Mike Lohman Melody Demel Shure Incorporated Formula PR 847-600-6417 619-234-0345 [email protected] [email protected] Shure Again Delivers Flawless Wireless at 57th Annual GRAMMY® Awards NILES, IL, Feb. 11, 2015— The 57th GRAMMY® Awards, broadcast on CBS the evening of Feb. 8 from the Staples Center in downtown Los Angeles, featured an unprecedented 23 live musical performances. With so many artists performing in an RF-intensive urban location, the production team was faced with the daunting task of ensuring flawless audio from everyone’s wireless microphones and in-ear monitors. From the hard-rocking opener by AC/DC to the poignant closing performance of “Glory” by John Legend and Common, Shure wireless microphone systems, wired mics, and in-ear monitoring systems were a near- constant presence. As always, musicians were permitted to use their preferred microphones for their performances. Although artists brought their own custom earphones, all but one of the in-ear monitoring systems used were Shure PSM®1000, with 24 channels split between two stages. With its unique diversity bodypack receiver, the PSM 1000 offers an extra measure of RF protection with exceptional audio quality. Both Shure Axient® and UHF-R® wireless systems were in use. AC/DC selected Axient for lead vocals and Angus Young’s guitar, with backing vocals on UHF-R systems with Beta 58A® capsules. Axient handheld systems were also selected by Sir Paul McCartney (Beta 58A), Adam Levine (SM58®), Juanes (Beta 58A), and Pharrell Williams. With its superb sound quality and remote control of all transmitter functions, Axient has the unique ability to detect and avoid interference.
    [Show full text]
  • Audio Systems Guide for VIDEO and FILM PRODUCTION Table of Contents
    AUDIO SYSTEMS GUIDE VIDEO AND FILM PRODUCTION By Chris Lyons A Shure Educational Publication AUDIO SYSTEMS GUIDE VIDEO AND FILM PRODUCTION By Chris Lyons Audio Systems Guide for VIDEO AND FILM PRODUCTION Table of Contents Introduction ........................................................................................................... 4 Part One: Microphones............................................................................................ 5 The Audio Chain ............................................................................................... 5 Microphone Characteristics................................................................................ 6 Frequency Response ......................................................................................... 7 Directionality .................................................................................................... 8 Transducer Types .............................................................................................. 9 Electrical Output............................................................................................. 11 Physical Design .............................................................................................. 12 Part Two: Wireless Systems ................................................................................... 17 Wireless Components ...................................................................................... 17 Portable and Camera Mount Receivers.......................................................
    [Show full text]
  • Shure Incorporated Audio Electronics – R&D, Production Testing Soundcheck™, Microphones, Calibrators
    CASE STUDY United States of America Telecom/Audio Shure Incorporated Audio Electronics – R&D, Production Testing SoundCheck™, Microphones, Calibrators Sidney N. Shure founded the company in 1925 as a radio parts distributor. Shure began production of microphones in 1932 and has expanded to its status today as a global leader in audio electronics. Shure has a number of manufacturing plants in the USA and Mexico, with sales offices and distribution operations throughout the world. Creative and innovative product development has resulted in a wide product range, and Shure is dominant in its core markets. From its humble start nearly 80 years ago, to the present day, there has always been a high focus on research and testing. Shure’s relationship with Brüel & Kjær goes back more than 25 years. A wide range of Brüel & Kjær products are used including microphones, calibrators, and telecom/audio testing equipment. Twelve SoundCheck™ Electroacoustic Test Systems are used in the R&D laboratory and for production line testing. © 2004 Brüel & Kjær. All rights reserved. Photo by kind permission of Shure Incorporated 80 Years of Technological Innovation was founded by Sidney N. Shure in 1925. Originally a distributor of parts for home- built radios, when factory-made radios took over the market, Shure changed direction and began manufac- turing microphones. From the very beginning, research and rigorous testing were high priorities. Shure’s first product was the innovative two-button carbon microphone, introduced in 1932. This was followed a year later by the company’s first condenser microphone. The Unidyne, often referred to as “the Elvis mic” introduced in 1939, was Shure’s first major success.
    [Show full text]
  • Audio Signal Processors?
    A Shure Educational Publication Selection and Operation of Audio and Operation Signal Processors Audio Signal Processors By Gino Sigismondi Selection Selection T ABLE OF C ONTENTS INTRODUCTION . 4 What Are Audio Signal Processors? . 4 What Types of Problems Can Benefit from Audio Processing? . 5 Feedback . 5 and Operation CHAPTER 1 of Audio Signal Processors TYPES OF AUDIO PROCESSORS . 6 1.1 Volume (Gain) Control . 6 1.2 Filters and Equalization . 6 1.3 Dynamics Processors . 11 1.4 Delay . 15 1.5 Adaptive Audio Processors . 15 CHAPTER 2 PRACTICAL APPLICATIONS FOR AUDIO SIGNAL PROCESSORS . 20 2.1 Maximizing Gain-Before-Feedback . 20 2.2 Improving Speech Intelligibility . 21 2.3 Sound System Gain Structure . 23 2.4 Digital Signal Processing . 25 REFERENCE INFORMATION . 26 Appendix 1: Sound Waves . 27 Appendix 2: Potential Acoustic Gain (PAG) and Needed Acoustic Gain (NAG) . 29 Glossary . 34 References . 34 Acknowledgements . 34 Biography . 34 Additional Shure Educational Publications . 34 3 I NTRODUCTION For any sound system, the primary goal is good sound. What, however, constitutes "good" sound? The three primary INSTRUMENT MICROPHONE AMPLIFIER of Audio Signal Processors measures of good sound are audibility, intelligibility, LOUDSPEAKER and fidelity. Many factors and Operation contribute to the quality of VOCAL MICROPHONE the sound, including the quality of the sound MIXER PROCESSOR BOUNDARY sources, the sound system, MICROPHONE and the room acoustics. The audibility of speech or music at the Figure 1-1: basic sound system furthest listener must be sufficient to achieve the desired effect: usually a comfortable listening level for system design. A basic sound system consists of four speech, and more powerful levels for certain kinds of components: music.
    [Show full text]
  • Alumni History and Hall of Fame Project
    Los Angeles Unified School District Alumni History and Hall of Fame Project Los Angeles Unified School District Alumni History and Hall of Fame Project Written and Edited by Bob and Sandy Collins All publication, duplication and distribution rights are donated to the Los Angeles Unified School District by the authors First Edition August 2016 Published in the United States i Alumni History and Hall of Fame Project Founding Committee and Contributors Sincere appreciation is extended to Ray Cortines, former LAUSD Superintendent of Schools, Michelle King, LAUSD Superintendent, and Nicole Elam, Chief of Staff for their ongoing support of this project. Appreciation is extended to the following members of the Founding Committee of the Alumni History and Hall of Fame Project for their expertise, insight and support. Jacob Aguilar, Roosevelt High School, Alumni Association Bob Collins, Chief Instructional Officer, Secondary, LAUSD (Retired) Sandy Collins, Principal, Columbus Middle School (Retired) Art Duardo, Principal, El Sereno Middle School (Retired) Nicole Elam, Chief of Staff Grant Francis, Venice High School (Retired) Shannon Haber, Director of Communication and Media Relations, LAUSD Bud Jacobs, Director, LAUSD High Schools and Principal, Venice High School (Retired) Michelle King, Superintendent Joyce Kleifeld, Los Angeles High School, Alumni Association, Harrison Trust Cynthia Lim, LAUSD, Director of Assessment Robin Lithgow, Theater Arts Advisor, LAUSD (Retired) Ellen Morgan, Public Information Officer Kenn Phillips, Business Community Carl J. Piper, LAUSD Legal Department Rory Pullens, Executive Director, LAUSD Arts Education Branch Belinda Stith, LAUSD Legal Department Tony White, Visual and Performing Arts Coordinator, LAUSD Beyond the Bell Branch Appreciation is also extended to the following schools, principals, assistant principals, staffs and alumni organizations for their support and contributions to this project.
    [Show full text]
  • RECORDING and SOUND REINFORCEMENT by Gino Sigismondi
    A Shure Educational Publication INTRODUCTION RECORDING AND SOUND REINFORCEMENT By Gino Sigismondi Introduction to RECORDING AND Table of Contents SOUND REINFORCEMENT Introduction . 4 Recording . 5 The Parts of a Recording System . 5 Microphones . 5 Recording Devices . 11 Mixers . 11 Hooking it up . 12 Sound Reinforcement for Music . 12 A Basic Sound System . 12 Microphones . 13 Mixers, Amplifiers and Loudspeakers . 17 Signal Processors . 19 Hooking it up . 22 Sound Reinforcement for Theater . 23 The Realities of Theater Sound . 23 Lavalier Microphone Techniques for Theater . 25 Summary . 27 Recommended Shure Microphone Models . 28 Appendix . 29 About the Author . 29 Glossary . 30 Recording and Sound Reinforcement 3 Introduction to RECORDING AND SOUND REINFORCEMENT Introduction An often overlooked yet vital part of modern musical performances is the sound reinforcement (PA) system. In a perfect world, a trained professional would always be available to purchase, setup, and operate the sound system. In reality, the funds are not always available for such a luxury. The responsibility then falls to the next most likely person available to run the sound system, the music director. After all, you just need a few microphones and a couple of loudspeakers, and it’s time to go on tour! And we want it recorded as well! Unfortunately, sound system setup is not quite that simple. It doesn’t, however, need to be overly complicated. While the extreme quantity of choices available at your local music shop may seem daunting (Cardioid? Dynamic? Low Impedance! Help!), with a few basic guidelines, you can learn what you need, how to connect it, and even how to make it sound good.
    [Show full text]