User Guide. Important Safeguards & to Avoid Risk of Electric Shock, Blades Are Sharp

User guide. Important safeguards & To avoid risk of electric shock, Blades are sharp. never immerse the cord, plug, Handle carefully. or power base of blender in

cautionary information. WARNING! water or other liquids. • The use of attachments not recommended or not sold by Warning! To avoid the risk of serious injury, carefully read all At all times, avoid contact the manufacturer may cause with moving parts. instructions before operating your NutriBullet®. When using any fire, electric shock, or injury. electrical appliance, basic safety precautions should always be • This appliance is not observed, including the following critical information. intended for use by persons WARNING! (including children) with If you are taking any PERSONAL SAFETY Never store the extractor blade reduced physical, sensory medication, especially on the power base without a or mental capabilities, or cholesterol-lowering BLENDING WITH cup or vessel attached. lack of experience and WARNING! medication, blood NUTRIBULLET® CUPS: knowledge, unless they have BLENDING WITH THE PITCHER: thinners, blood pressure been given supervision or drugs, tranquilizers, or Do not put hot liquids instruction concerning use Use caution when blending antidepressants, please in any of the blending of the appliance by a person check with your physician vessels before blending. hot liquids in the pitcher. responsible for their safety. before consuming any ® Start with cool or room Never turn the power on • Children should be supervised NutriBullet recipes. while using the pitcher temperature ingredients. to ensure that they do not The following list of seeds and without the vented lid cap Heated ingredients can play with the appliance. pips contain chemicals that WARNING! WARNING! inserted and locked into the create internal pressure in a release cyanide into the body pitcher lid, as ingredients • If the power supply cord is sealed blending vessel, which when ingested. Do not use the can splash, and if hot or damaged, it must be replaced may erupt on opening and following seeds and pips in warm, could potentially by the manufacturer, its cause thermal injury. the NutriBullet®: apple seeds, cause thermal injury and/or service agent or similarly apricot seeds, cherry pips, Caution must be observed if property damage. qualified persons in order to hot liquid is poured into the avoid a hazard. plum pips, and peach pips. product (food processor or Friction from the rotating blade will cause ingredients • Switch off the appliance and PRODUCT SAFETY blender) as the liquid can be disconnect from power supply ejected out of the appliance to heat and generate internal • If the NutriBullet® malfunctions pressure in the sealed vessel. before changing accessories due to sudden steaming. or handling moving parts. or is dropped, or damaged in Do not continuously operate any manner, discontinue use Never blend carbonated for more than one minute. If • To reduce the risk of and contact Customer Service ingredients or liquids. the vessel is warm to touch, personal injury or damage for further assistance. Built-up pressure from allow to cool before carefully to the device, keep hands opening pointed away from and utensils away from the • To prevent overheating, released gases can your body. cutting blade. never allow the motor to run cause container to burst, continuously for more than one Remove spoon or other foreign resulting in possible injury. • To reduce the risk of injury minute at a time, as this may objects before blending. and leakage, make sure cause damage to the motor as Never permit any blended Never leave the NutriBullet® the blade base is securely well as increase the thermal mixture to sit inside a sealed unattended while it is in use. screwed onto the cup before pressure inside the cup which vessel without first releasing Close supervision is necessary placing it on the power base can cause personal injury. WARNING! internal pressure. and operating the appliance. when any appliance is used • Check gasket to make sure it by or near children. is completely seated in the 2 3 blade unit before each use. If • Do not pull, twist, or damage be incorporated during use) or as needed for seal is damaged, replace the the power cord. blending, first add the optimal performance. complete blade assembly. base ingredients, seal the • Do not allow the cord to • Do not use NutriBullet® pitcher lid with vented lid • If the motor stops for any hang over the side of the outdoors. If exposed to cap attached, and begin reason, unplug the power counter or table. inclement weather elements blending. Then, once the base and let it cool for at least such as rain or other wet • Do not allow cord to touch ingredients are well mixed, 15 minutes as this will reset conditions, discontinue use. hot surfaces, including stove. twist open the vented lid cap the internal thermal breaker. Unplug the NutriBullet® when and carefully pour or drop • The NutriBullet® power base it is not in use. Make sure the • Never use the NutriBullet® ingredients into the mixture. is made exclusively to work power base is unplugged Blender Combo without with the NutriBullet® cups and • If you need to push ingredients before assembling, adding liquid or when the blades only and not other Bullet closer to the blade, ONLY disassembling, adding cup is empty, as doing so branded products such as the USE THE TAMPER PROVIDED additional parts, or cleaning. may damage the blade. Magic Bullet. Use with items with the NutriBullet® Blender • TO AVOID LEAKAGE, DO NOT • The NutriBullet® is not not specifically manufactured Combo. DO NOT use any OVERFILL THE BLENDING intended for use in microwave for the NutriBullet® will void apparatus other than the VESSELS! The pitcher is ovens. Do not place the the warranty. tamper to push ingredients marked with two MAX lines: NutriBullet® cups, power toward the blade. The tamper one for solid ingredients base or any accessories in a WARNING: is specifically designed not (higher line) and one for liquid microwave as this may result to come in contact with the VENTILATION CAUTION ingredients (lower line). Your in damage to the appliance. blade. Spatulas, spoons NutriBullet® cups are also Always operate the and other tools can make ® marked with a MAX line. When • Use of adapters and NutriBullet on a level surface, contact with the blade, which filling the blending vessels, converters is considered an leaving unobstructed space may result in damage to the

WARNING! make sure your ingredients unauthorized modification beneath and around the machine, damage to property, do not exceed their respective of the product and as such power base to permit proper and/or possible injury. will void the warranty. Use air circulation. Slots and MAX lines. Exceeding the of this product in locations openings on the bottom of • NEVER USE YOUR indicated MAX lines can result with different electrical the product are provided for FINGERS OR ANY PART in leakage, and may lead to specifications may result in ventilation to ensure reliable OF YOUR HAND TO PUSH dangerous pressurization. damage to the product. INGREDIENTS DOWN motor operation and to • Never remove cup/blade TOWARD THE BLADE. Only CAUTION: prevent over-heating. assembly from the power • In order to avoid use the provided tamper. a hazard due to inadvertent WARNING: to prevent fire base until the motor comes to resetting of the thermal cut- hazard, power base openings • The cyclonic action® of your a complete stop. Removing out, this appliance must not be should be free of dust or lint NutriBullet® requires the use the cup/blade assembly while supplied through an external and never obstructed with of liquids to make smoothies power base is still running switching device, such as a flammable materials such and other nutritious items. The may cause damage the blade timer, or connected to a circuit as newspapers, tablecloths, NutriBullet® is not intended to coupling or motor gear. that is regularly switched on napkins, dishtowels, or be used without liquids, or as and off by the utility. place mats. an ice crusher. ALWAYS ADD LIQUID to your recipe. Save these • Periodically inspect cord and • Always operate the pitcher instructions! plug for damage. Do not with the pitcher lid securely • We recommend ! operate any appliance with a in place. replacing your easy-twist damaged cord or plug. extractor blade every 6 FOR HOUSEHOLD • With recipes that require months (depending on USE ONLY 4 certain ingredients to 5 Contents.

08 What’s included 09 Assembly guide 10 Getting started 10 Safety guide 11 Pitcher assembly & use 14 NutriBullet® cup assembly & use 16 Blending control panel. 17 How to use the blending control panel 18 Care & maintenance. 18 How to clean the NutriBullet® 20 How to store 20 Replacement parts 21 NutriBullet® Blender Combo’s one-year limited warranty

Thank you for purchasing the NutriBullet® Blender Combo.

6 7 What’s included. Assembly guide.

vented lid cap

pitcher lid

700 mL 590 mL to-go lid cup cup easy-pour spout NutriBullet® tamper cup

pitcher

integrated blade

pitcher with easy-twist pitcher lid integrated blade extractor blade with vented blender control lid cap panel

motor base easy-twist extractor blade

suction cup feet motor base tamper

8 9 NOTE: Always add liquid. The Pitcher assembly blending pitcher is marked with Getting started. two MAX lines: one for solid & use. ingredients (higher line) and one for liquids (lower line). When fi lling the blender, make sure your ingredients do not exceed their respective MAX lines.

PLEASE KEEP 1 Review all warning and THESE IMPORTANT caution statements in the SAFEGUARDS IN Important Safeguards section (pg 2-5) and on MIND WHEN USING the previous page before THE APPLIANCE: proceeding to Step 2. • Make sure the base is plugged in Use extra caution when for use. blending hot liquids in 4 • DO NOT attempt to operate the pitcher the pitcher. Place the pitcher lid with on the appliance without attaching vented lid cap attached on the pitcher lid and vented lid cap. Steam and splatters can escape the pitcher, making sure it’s through the vented lid, potentially • Never run the appliance while empty. causing scalding and/or burns. aligned to the handle. NEVER blend hot liquids in your • Appliance accessories are not WARNING! pitcher without the pitcher lid 2 intended to be used in the microwave and vented lid cap attached. The Place the motor base on as it may damage the accessories. vented lid cap is ventilated to allow a clean, dry, level surface • Never leave the appliance steam and pressure to release, such as a counter or table. unattended while in use. while guarding against excess splashing. NEVER blend hot liquids Never blend hot ingredients in your Nutribullet cups or any when using any sealed other sealed vessel. NutriBullet® cups. Heated ingredients can pressurize When blending hot liquids, add 5 sealed containers when agitated liquid and solid ingredients to your and violently expel hot contents upon pitcher below their respective MAX Place the pitcher onto the opening. Always start the blending lines. Attach the pitcher lid with the motor base — handle facing WARNING! process with room temperature or vented lid cap inserted. Press the to the right of the blending refrigerated ingredients and liquids POWER icon, then begin blending on control panel, never towards (21°C/70°F or cooler). the LOW setting. Once ingredients are integrated and the mixture is the back — and gently twist level (no splashing), increase speed clockwise so it locks in place. as needed. 3 When you hear the click, it’s Place the pitcher on a locked and ready to blend. clean, dry, level surface. Add the ingredients to the NOTE: If you are left-handed, place pitcher, making sure they do the handle facing towards the center not exceed the MAX line. of the blending control panel and twist clockwise.

10 11 NOTE: If you need to add additional ingredients while blending, switch the setting to LOW and remove the vented lid cap from your pitcher lid, 6 leaving the lid attached. Add 9 ingredients through the hole Plug the power cord into in the top of the lid, followed When you have reached an electrical outlet and press by the tamper if necessary. your desired consistency, POWER to turn on the Replace the vented lid cap, then pause/stop the appliance increase to your desired speed. blender. DO NOT attempt to add items by pressing POWER or the through the vent hole when speed you selected and wait blending hot ingredients. for the blades to stop turning. The unit will enter idle-mode. The POWER button will remain illuminated. 8 WARNING: Blades are sharp. Never insert your hands into the pitcher. If the ingredients stick to the side of the pitcher, stop the appliance by pressing 10 Press POWER to turn off POWER and wait for the unit completely. the blade to stop turning.

LOW Then remove the pitcher lid and use the tamper to dislodge the ingredients. When fi nished, replace the 7 CAUTION: Do not use any apparatus other than the lid and continue blending. tamper to push ingredients if the ingredients continue To start blending, select toward the blade. The tamper to stick, consider adding a your speed on the blending is specifically designed not to little more liquid. control panel. come in contact with the blade. Spatulas, spoons and other tools are long enough to reach NOTE: Proceed to the blending the blade, which may result control panel chart on page 16 for in damage to the machine, 11 speed defi nitions. damage to property, and/or possible injury. Twist pitcher counterclockwise and lift off the motor base. Pour and enjoy!

12 13 NutriBullet® cup Handle the easy-twist extractor 9 Press POWER to turn off blade assembly with care, as the unit completely. assembly & use. the blades are sharp.

WARNING! Never leave the appliance 1 Review all warning and unattended while in use. EXTRACT caution statements in the NEVER BLEND HOT Important Safeguards INGREDIENTS, as doing section (pg 2-5) before so may cause excessive 7 proceeding to Step 2. pressure buildup, resulting in risk of personal injury and or property damage. To start blending, select 2 Place the motor base on a speed or the EXTRACT a clean, dry, level surface program on the blending such as a counter or table. control panel. This program 10 will turn off automatically. Buttons will illuminate while Unlock the assembly by in use. gently twisting the cup counterclockwise. You will NOTE: Proceed to the blending hear a click. Enjoy! control panel chart on page 16 for speed defi nitions. NOTE: Blending should not require 5 longer than one minute to yield smooth and creamy results. 3 Plug the power cord into an electrical outlet and Add ingredients and liquid press POWER to turn on to the NutriBullet® cup. the blender.

NOTE: Always add liquid. Do not overfi ll! To avoid leakage, do not add ingredients beyond the MAX line. CAUTION 8 Do not remove the easy-twist extractor blade from the When you have reached NutriBullet® cup until blending your desired consistency, has completely ceased. Do not pause/stop the appliance use the easy-twist extractor blade as a storage lid for your cup. by pressing POWER or the Some foods may contain active speed you selected and wait ingredients or release gases that 6 for the blades to stop turning. will expand if left in a sealed The unit will enter idle-mode. container, resulting in excessive 4 Turn the cup upside down The POWER button will pressure buildup that can pose and place it onto the motor a risk of injury. When storing remain illuminated. contents in the cup, use plastic Twist the easy-twist base, gently turning the wrap or foil to seal your container. extractor blade onto the cup clockwise to lock into NOTE: speeds will automatically Always point contents away from cup until tightly sealed. the motor base. shut off after 60 seconds. your body when unsealing.

14 15 WARNING! NEVER BLEND HOT INGREDIENTS IN ANY SEALED NUTRIBULLET® CUP. Blending control panel. Doing so may cause excessive pressure buildup, resulting in risk of personal injury or property damage. Hot items should only be blended in the pitcher using proper safeguards.

TURNING ON/OFF PULSE EXTRACT The power button actuates EXTRACT Use to control chopping LOW the master power of the LOW and processing. appliance. When pressed, this button lights up to indicate the WARNING: DO NOT motor is powered on, and the use this setting with other functions can be used. hot ingredients! Always turn the master power off and unplug the unit when the machine is not in use.

THE EXTRACT PROGRAM How to use the blending control panel. EXTRACT Use to break down whole LOW fruits, vegetables, and ice into nutrient-rich smoothies. This LOW OR HIGH THE EXTRACT PROGRAM button will activate a run cycle Select a speed and press once Press the EXTRACT button that shuts off automatically. to turn on. The button will and the NutriBullet® Blender illuminate. To pause/stop the Combo will do the work for you. unit, press the button a second This program automatically LOW SPEED time — it will de-illuminate — or stops at the end of its cycle. To

EXTRACT press POWER . While in the pause or stop the blender, press Use to mix thin batter, idle-mode, the POWER button EXTRACT again or POWER . LOW gravies, marinades; scramble will remain lit. To fully power eggs; process cooked foods down after pausing, press PULSE and uncooked fruits. POWER and unplug the unit. Press and release the PULSE NOTE: If using the pitcher, speeds button to chop ingredients. If will run until paused/stopped. If using the NutriBullet® cup, speeds will you hold this button down, it will HIGH SPEED automatically shut off after 60 seconds. continue to run until you release it. EXTRACT Use to liquefy thick LOW mixtures and blend frozen fruits and vegetables.

16 17 Care & maintenance.

Cleaning the NutriBullet® is easy. The pitcher is dishwasher-safe while the cups and to-go lids are TOP RACK dishwasher-safe. The easy- twist extractor blade and motor base can be quickly hand-washed EASY-TWIST NUTRIBULLET® CUPS with soap and water. Read on for best practices. EXTRACTOR BLADE: & TO-GO LIDS: • Blades are sharp! Handle These items are TOP RACK the easy-twist extractor dishwasher-safe. We Here’s how to clean blade with care when recommend rinsing and briefly the NutriBullet®: cleaning! It is best to clean scrubbing them with a dish blades immediately after use brush to remove any remaining STEP 1: MOTOR BASE: to reduce buildup of residue. debris before placing in the If food particles get stuck, dishwasher. NEVER use the The most important thing — • To avoid risk of injury, NEVER use a small brush or sponge sanitize cycle to wash the cups ALWAYS POWER OFF THE UNIT attempt to clean the actuator to target and dislodge them. — heat this high can warp and UNPLUG the motor base system on the motor base the plastic. from the power outlet when it while the NutriBullet® Blender • Do not remove any is not in use. Do not attempt to Combo is plugged in. components of the easy- handle the appliance until all twist extractor blade; this NUTRIBULLET® PITCHER: • Do not attempt to remove any parts have stopped moving! can result in permanent pieces from the motor base. WARNING: Blades are sharp! This includes during assembly damage to the blade, Use caution when cleaning and disassembly, while • Use a sponge or dish cloth resulting in leakage when the pitcher. changing accessories during dampened with warm soapy blending. If, over time, the cleaning, and any time you water to wipe down the easy-twist extractor blade • The pitcher is dishwasher- leave the machine unattended. motor base until clean. becomes loose or damaged, safe. We recommend rinsing you may order a new easy- and briefly scrubbing it with • If necessary, you may use STEP 2: twist extractor blade at a dish brush to remove any a small brush to scrub the nutribullet.com or contact remaining debris before Detach the NutriBullet® cup / actuator system area to customer service. placing in the dishwasher. easy-twist extractor blade or ensure it’s clean. NEVER use the sanitize cycle pitcher from the motor base. • Dry the easy-twist extractor • To clean leakage residue to wash the pitcher — heat blade completely after from the motor base, wipe this high can warp the plastic. STEP 3: every use. with a damp sponge and • If preferred, hand-wash the Clean the individual warm water. • Regularly check the pitcher with soap and water. components (motor base, condition of the bottom • If necessary, you may use Stuck-on ingredients might easy-twist extractor blade, of the blade for cracking a small brush to scrub the require extra scrubbing from NutriBullet® cups) as or breakage. If damaged, actuator system area to a dish brush or sponge. recommended in the replace easy-twist extractor ensure it’s clean. following pages. blade immediately to prevent • Regularly check the WARNING: Never submerge possible personal injury. structure of the pitcher and the motor base in water. twisting threads for cracking, crazing, or breakage.

18 19 If damaged, replace water to its MAX line and add immediately to prevent 1-2 drops of dish soap. For cups, possible personal injury. twist on the easy-twist extractor blade, and blend on the motor one (1) year limited • NEVER USE A PITCHER base for 20-30 seconds. For the THAT DOES NOT PROPERLY pitcher, attach lid and blend on ALIGN WITH THE BLADE. replacement warranty the motor base for the same Doing so may cause the amount of time, 20-30 seconds. pitcher and motor base to This should loosen debris separate, exposing the statement. enough to scrub away with blade assembly and soap and water. potentially causing severe If your product becomes YOUR WARRANTY personal injury. defective due to faulty IS SUBJECT TO THE FOLLOWING CONDITIONS: TAMPER How to store: material or workmanship • Always hand-wash the • DO NOT operate the Store the NutriBullet® Blender within a period of 1 tamper with soap and water. appliance with a damaged Combo pitcher upright with the year from the date of Stuck-on ingredients might plug or cord, or if the unit has pitcher lid secured on top. Do require extra scrubbing from purchase, we warrant to been dropped, damaged or not place anything on top of a dish brush or sponge. do the following: dropped in water. To avoid the pitcher lid. Store remaining the risk of electric shock, do pieces in a safe place where • For New Zealand Consumers: STUBBORN CLEAN UP: not disassemble or attempt they will not be damaged and We will replace the product to repair the appliance If ingredients get stuck to the won’t cause harm. with a new product, free of on your own. If the supply ® NutriBullet cups, easy-twist charge, or repair the product cord is damaged, it must extractor blades, or pitcher, WARNING: NEVER store the easy- at our cost, at our discretion. be replaced by a qualified here’s an easy cleanup solution: twist extractor blade on the motor base without a NutriBullet® cup or • For Australian Consumers: electrician in order to avoid fill the vessel with room the pitcher as the exposed blades Our goods come with a hazard. Incorrect re- temperature (21°C/70°F or less) pose a serious laceration hazard. guarantees that cannot assembly or repair can cause be excluded under the a risk of electric shock or Australian Consumer injury to persons when the Law. You are entitled to appliance is used. a replacement or refund • The item has not been for a major failure and for misused, abused, neglected, compensation for any other altered, modified or repaired reasonably foreseeable by anyone. loss or damage. You are also entitled to have the • The item has been subjected Replacement parts. goods repaired or replaced to fair wear and tear. if the goods fail to be of • The item has not been used acceptable quality and the for trade, professional or To order additional parts and accessories, please visit our website failure does not amount to a hire purposes. at bulletbrands.com.au / bulletbrands.co.nz. major failure.

20 21 • The item has not sustained This warranty does not replace damage through foreign but is in addition to your objects, substances or accident. statutory rights. YOUR WARRANTY This warranty does not apply DOES NOT COVER: to accessories supplied with the item. • Components that are subject to natural wear and This warranty applies only to tear caused by normal use the original purchaser and may in accordance with not be transferred. operating instructions. Replacement items will • Unauthorised/improper be covered by the limited maintenance/handling or warranty for the balance of the overload is excluded from warranty period from the date this warranty. of the original purchase. • For guarantee claims, you PLEASE NOTE: will need to submit a proof Only the defective product of purchase in the form of or parts returned to place of a valid receipt that displays purchase will be replaced under date and place of purchase. this warranty.

NEW ZEALAND AUSTRALIA PO Box 100-707 PO Box 574 NSMC South Morang Auckland 0745 Victoria 3752 0800 285538 1300 285538 www.bulletbrands.co.nz www.bulletbrands.com.ua

220-240VAC 50-60Hz 1000W

Illustrations may differ from the actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.

191024_NBF07500-1008DG