Easycell Series Product Leaflet

EasyCell series Product Leaflet

SmallCells Backhaul Complete Solution

The need of high capacity connectivity in the urban area is a new requirement brought in Mobile networks by the introduction of 4G/LTE small cell. Densi cation and geographical distribution at street level of the access points is characterizing the need for a new backhauling model. EasyCell is a family of products comprising of sub 6GHz solutions, ptp and pmp connectivity, with True-NLOS smart antennas, millimetre wave (V band) 60GHz ptp high capacity links, and a MEF 2.0 aggregation gateway oering the best solutions tool box to address the the urban canyon connectivity challenge.

Venezia, Italy SMALL CELLS BACKHAUL SOLUTION EasyCell series

EasyCell family includes: • EasyCell60, V-band (60GHz) millimeter wave radio link • EasyCell-NT, Sub6 (2.6GHz, 3.5GHz and 5.4-5.8GHz) solution • EasyCell Gateway, MEF 2.0 Ethernet aggregation equipment

EasyCell Series is the ideal set of solutions for Small Cells Backhauling, in dense urban areas, in extremely interfered scenarios (concurrent carriers as well as 5GHz “Wifi polluted” environment) and in tough propagation conditions (i.e. partial or complete NLOS), providing in each case connectivity with 100% carrier grade performances.

MAIN CHARACTERISTICS

EasyCell60 EasyCell-NT EasyCell Gateway

• 1.0Gbps full duplex - FDD • Smart Antenna with Beamforming • Indoor and Outdoor casing and nullforming • 500MHz FDD channel BW • Up to 4x PoE ports Up to 400Mbps aggregated • QPSK-8PSK ACM • • POE++ up to 80W each, with Max throughput per link 150W load • Full Carrier Ethernet protocol stack • 10 to 40MHz channel bandwidth Integrated voltage up-converter • Synchronous Ethernet andIEEE • OFDM (256QAM ACM on each on PoE ports for maximum cable 1588v2 TC support. • sub-carrier) reach • 35W reduced consumption, POE+ PtP and PMP applications. PMP link Synchronous Ethernet and IEEE (802.3at) • • capacity independent on the 1588 v2 support number of End Nodes • MEF2.0 fully compliant • MPLS ready • Single NE with EasyCell Series

TYPICAL APPLICATIONS

EasyCell60 EasyCell-NT EasyCell Gateway

• Small Cell Backhauling street level • Small Cell Backhauling street level • Multiple any F.O. PoE powered deployment deployment units aggregation (not limited to EasyCell Series) • 4G-LTE Mobile Backhaul leaf • True-NLOS scenarios connectivity • Emergency wireless links • SmallCells Backhaul aggregation unit • Last Mile fiber extension • Oﬀshore application • MacroCell Network interworking Enterprise, leased lines, • • Complementary solution to fiber element intracampus connectivity build in dense areas • DCN demarcation device

MEMBER OF:

EasyCells60 1.0 Gbps V-Band Full Outdoor

Frequency 60 GHz (57-64 GHz) FDD Supported con gurations (1+0), 2x(1+0) daisy chain Modulation schemes BPSK – 8PSK, with ACM Supported channel BW 500 MHz Supported throughput Up to 1.0 Gbps Trac interfaces 2 x GE electrical Output Power Max EIRP 44dBm Latency < 200 microsec Synchronization SyncE, IEEE 1588v2

EasyCell-NT Sub6GHz Beamforming & Nullforming

Frequency 2.6 GHz, 3.5 GHz and 5.x GHz Supported con gurations (1+0), (1+1), (2+0) Modulation schemes 256 QAM over TDD OFDM Supported channel BW 10 MHz, 20 MHz, 25 MHz & 40 MHz Supported spectral eciency and nodal capacity 1x EN (i.e. PTP con guration) 10 Gbits/Hz (up to 400Mbps) - PTP 2x EN (i.e. PMP con guration) 20 Gbits/Hz (up to 800Mbps) - PMP 3x EN (i.e. PMP con guration) 30 Gbits/Hz (up to 1200Mbps) - PMP Interference cancellation Beamforming & Null forming Additional ABIC @ 5.x GHz Synchronizationcancellation SyncE, IEEE 1588v2

EasyCell-Gateway Indoor and Outdoor MEF 2.0 Aggregator

Mechanical arrangement Indoor (1RU) or IP65 full outdoor available versions Interfaces indoor arrangement up to 2x 10/100/1000baseT + PoE, 8x 1000baseX el/SFP Interfaces outdoor arrangement up to 4x 10/100/1000baseT + PoE, 2x 1000baseX SFP L2 Switching 25Gbps, MEF 2.0 Carrier Class Synchronization SyncE, ITU T-BC based on IEEE 1588v2 Power Supply -48VDC (Indoor) or 220VAC (Outdoor)