Design Size/mm PU Article no. 1000 V 1 Stripping diagonal Single joint with induction hardened precision , (approx. 64 HRC), for hard, medium-hard and 2 soft , with two additional stripping functions for solid and multi-wire conductors measuring 1.5 mm2 and 2.5 mm2 160 (6“) 6 10 0652 3 Diagonal sealing pliers Single joint with induction hardened 4 precision (approx. 64 HRC), for all , also for piano wire, made of electric , with punches 8 mm ø 160 (6“) 6 10 0030 5 loose punch 8 mm ø 1 item 10 1732 1000 V Heavy duty end cutter 6 according to DIN ISO 5748, lap joint, with induction hardened precision blade 7 (approx. 64 HRC), for all types of wire, also including piano wire, made of electric steel 200 (8“) 6 10 0402 8 1000 V Combination pliers according to DIN ISO 5746, single joint, 9 with induction hardened precision blade (approx. 64 HRC), for all wires, also including piano wire, made of special steel with slightly conical, ridged gripping surfaces and ridged opening (burner hole) 160 (6“) 6 10 0334 10 180 (7“) 6 10 0336 200 (8“) 6 10 0338 11 1000 V 12 Single joint with adjusting screw for setting the desired wire or stranded wire diameter, for solid and multi-wire conductors 13 up to 5 mm ø or 0.75 mm2 to 6 mm2, with internal opening spring 160 (6“) 6 10 0686 14 1000 V Telephone pliers with straight jaws according to DIN ISO 5745, single joint, 15 with induction hardened precision blade (approx. 60 HRC), long, flat-round jaws (flat-round pliers), serrated gripping surfaces and serrated opening (burner hole), with blades for hard and soft wire 16 145 (5.5“) 6 10 0212

17 160 (6“) 6 10 0214 18 200 (8“) 6 10 0216 1000 V 19 Telephone pliers with bent jaws according to DIN ISO 5745, single joint, jaws at a 45° angle, with induction hardened 20 precision blade (approx. 60 HRC), long, flat-round jaws (flat-round pliers), serrated gripping surfaces and serrated opening (burner hole), with blades for hard and soft wire 21 160 (6“) 6 10 0236 200 (8“) 6 10 0238

22 1000 V Flat nose pliers (long flat nose pliers)

23 according to DIN ISO 5745, single joint, long, flat jaws, jaw length 50 mm, serrated gripping surfaces 160 (6“) 6 10 0024 24 1000 V Round nose pliers (long flat nose pliers)

25 according to DIN ISO 5745, single joint, long, round jaws, jaw length 50 mm, finely serrated gripping surfaces 160 (6“) 6 10 0062 26

Design Size/mm PU Article no.

44 Advice and ordering: Phone: +49 (0)2191 3718-01, Fax: +49 (0)2191 3718-85, E-mail: [email protected]