Curve Breakfast Set 2 Slice Toaster and 1.7L Kettle
Total Page:16
File Type:pdf, Size:1020Kb
CURVE BREAKFAST SET 2 SLICE TOASTER AND 1.7L KETTLE User Guide PUP2000 PUP2000_19EM1 (ANZ).indd 1 9/24/19 10:28 Contents Sunbeam’s Safety Precautions Sunbeam’s Safety Precautions 1 SAFETY PRECAUTIONS FOR YOUR SUNBEAM • Clean crumb tray regularly. Features of your Curve Toaster 2 TOASTER. • Do not allow crumbs to accumulate in the crumb Using your Curve Toaster 3 • Do not place any objects such as toast, bread or tray. similar on top of your toaster when in use. Toaster Functions 3 • Do not toast stale bread, rice crackers or similar • Operate the toaster on a flat level surface. on a high setting as they may catch fire. Toasting Tips 4 • The bread may burn, therefore do not use the • WARNING: Never attempt to extract jammed Care and Cleaning 4 toaster near or below combustible material, such toast, crumpets or muffins with a knife or Features of your Curve Kettle 5 as curtains. any other metal object, as contact with a live Using your Curve Kettle 6 • Do not leave your toaster unattended when in element may cause electrocution. Sunbeam’s 3-Way Safety System 7 use. Care and Cleaning 8 Sunbeam is very safety conscious when designing • Do not use an appliance for any purpose other and manufacturing consumer products, but it is than its intended use. essential that the product user also exercise care • Do not place an appliance on or near a hot gas when using an electrical appliance. Listed below are flame, electric element or on a heated oven. precautions which are essential for the safe use of • Do not place on top of any other appliance. an electrical appliance: • Do not let the power cord of an appliance hang • Read carefully and save all the instructions over the edge of a table or bench top or touch provided with an appliance. any hot surface. • Always turn the power off at the power outlet • Do not operate any electrical appliance with a before you insert or remove a plug. Remove by damaged cord or after the appliance has been grasping the plug - do not pull on the cord. damaged in any manner. If damage is suspected, • Turn the power off and remove the plug when the return the appliance to the nearest Sunbeam appliance is not in use and before cleaning. Appointed Service Centre for examination, repair • Do not use your appliance with an extension cord or adjustment. unless this cord has been checked and tested by • For additional protection, Sunbeam recommend a qualified technician or service person. the use of a residual current device (RCD) • Always use your appliance from a power outlet of with a tripping current not exceeding 30mA in the voltage (A.C. only) marked on the appliance. the electrical circuit supplying power to your • This appliance is not intended for use by persons appliances. (including children) with reduced physical, • Do not immerse the appliance in water or any sensory or mental capabilities, or lack of other liquid unless recommended. experience and knowledge, unless they have been • Appliances are not intended to be operated by given supervision or instruction concerning use means of an external timer or separate remote of the appliance by a person responsible for their control system. safety. • This appliance is intended to be used in • Children should be supervised to ensure that they household and similar applications such as: staff do not play with the appliance. kitchen areas in shops, offices and other working • The temperature of accessible surfaces may be environments; farm houses; by clients in hotels, high when the appliance is operating. motels and other residential type environments; • Never leave an appliance unattended while in use. bed and breakfast type environments. If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood. 1 PUP2000_19EM1 (ANZ).indd 2-1 9/24/19 10:28 Features of your Curve Toaster Using your Curve Toaster Plug the toaster into a 230-240 volt AC 5. If you need to remove the toast before the power outlet and switch the power on. cycle is complete, press the Cancel button on the left, top position of the toaster next Toasting Bread to the toasting lever. The Cancel button 1. Position the bread into the bread slot. will immediately interrupt the toasting 1 2. Select the desired browning setting using cycle and pop the toast up. the Browning Control. Note: If toasting 1 slice it is recommended that you use a lower browning setting to Hot Surfaces achieve your required result and to prevent 2 burning. Do Not Touch Important: Do not toast stale bread, rice crackers or similar on a high setting as there This symbol indicates, temperature of is a chance that they may catch fire. accessible surfaces may be high when the 3. Push the Toasting Lever down to appliance is operating and for some time commence the toasting cycle. after use. 4. When the desired browning is achieved, the toaster will automatically stop toasting and pop the toast up. 3 7 4 5 6 Toaster Functions Cancel button Defrost Feature The Cancel button immediately stops any of The defrost feature can be used to toast your the toasting cycles. As a consequence of this, frozen bread. The colour of your toast will 1. Self-centring bread slots 5. Reheat button the toast will pop up. brown according to the toasting setting you have chosen. This feature is activated by 2. Toasting lever 6. Cancel Reheat button pressing the defrost button on at any time The Reheat button can be selected after the during the toasting cycle. 3. Defrost button 7. Removable crumb tray toasting cycle has finished. Simply select the reheat button and press the toasting lever 4. Browning control dial down to start the reheat cycle. 2 3 PUP2000_19EM1 (ANZ).indd 2-3 9/24/19 10:28 Toasting Tips Features of your Curve Kettle • If your bread jams in the toaster, switch WARNING: Never attempt to extract jammed power off, remove the plug from the power toast, muffins, bagels or crumpets with a knife outlet and ease the bread out of the or any other metal object, as contact with the toaster. live element may cause electrocution. • Ensure muffins or bagels are cut into even halves and fit freely into the bread slot. Do 1 not force them into the toaster. • If toasting 1 slice it is recommended that you use a lower toaster setting to achieve your required result and to prevent burning. 2 3 Care and Cleaning 5 Always turn the power OFF and remove the To clean the toaster interior plug from the power outlet after use and Clean inside the toaster regularly. To do 4 before cleaning your toaster. this, unplug the appliance, turn it upside down over the sink and gently shake all the To clean the exterior crumbs out. Wipe exterior with a slightly dampened cloth and polish with a soft dry cloth. 1. Filter (behind spout) 4. 360˚ rotational power base with Do not use metal scourers or abrasives as this cord storage may scratch the exterior surface. 2. Water level window Removable Crumb Tray 5. Easy clean, fast boil concealed 3. On/off switch To remove the crumbs, simply pull tray out, element empty and place it back in the toaster. Important: Clean the crumb tray regularly. Do not allow crumbs to accumulate, as they may cause a potential fire hazard. 4 5 PUP2000_19EM1 (ANZ).indd 4-5 9/24/19 10:28 Using your Curve Kettle Sunbeam’s 3-Way Safety System Before using your kettle. NOTE: Ensure that the ON/OFF switch is clear Our 3-Way Safety System ensures that your If this occurs, allow the kettle to cool It is recommended that you clean your kettle of obstructions and the lid is firmly closed. kettle will: before filling with cold water and before use by filling the kettle with water, The kettle will not turn off if the ON/OFF re-boiling. 1. Automatically switch off after boiling. up to the maximum level indicator, boil and switch is constrained or if the lid is left open. 3. Shut-down in case of overheating. discard. Do not remove the kettle from the power base For convenience, safety and energy while water is heating. efficiency, your Sunbeam kettle will In the event of overheating, the kettle will Using your kettle. 6. Lift the kettle from the power base and automatically switch off after boiling. automatically shut down to prevent further 1. To fill the kettle, remove it from the power pour the water. damage. Should this occur, take your kettle 2. Cut-out for boil-dry protection. to a Sunbeam Service Centre or Appointed base and lift the lid. Alternatively, the NOTE: Use caution when pouring the water If the kettle is operated without water, it Service Agent. kettle may be filled through the pouring from your kettle, as boiling water will scald. spout. will automatically cut-out, preventing any 7. The kettle may be stored on the power damage to the element. 2. Fill the kettle with the desired amount of base while not in use. The kettle will not water. Always fill the kettle between the re-boil until the ON/OFF switch is pressed minimum and maximum marks. Too little downward. water will result in the kettle switching off NOTE: Ensure the power is turned off at the before the water has boiled. power outlet when the kettle is not in use.