FLUE BRUSHES BOILER BRUSHES TEMPERED WIRE—DOUBLE SPIRAL DOUBLE STEM HORSESHOE BOILER BRUSH

4 1/2” long tempered Double spiral, wire brush part, 1/4’ black oil tempered male pipe thread. wire brush part with 1/4” male pipe thread. Stock # Flue Size Brush Dia. 43306 1” 3/4” 43308 1 1/4” 1” Stock # Brush Size 43312 1 1/2” 1 1/4” 13382 1 1/2” x 4” x 5” 43314 1 3/4” 1 1/2” 13393 1 3/4” x 4” x 5 1/2” 43316 2” 1 3/4” 13384 2” x 4 1/2” x 5” 43318 2 1/4” 2” 13386 2 1/2” x 5” x 5” 43322 2 1/2” 2 1/4” 13394 2 1/2” x 6” x 6 1/2” 43324 2 3/4” 2 1/2” 43326 3” 2 3/4” 13395 3 1/2” x 6” x 6 1/2” 43328 3 1/4” 3” 43332 3 1/2” 3 1/4” FLAT BAFFLE BOILER BRUSH 43334 3 3/4” 3 1/2” 43336 4” 3 3/4” 43338 4 1/4” 4” Double spiral, black oil 43871 4 1/2” 4 1/4” tempered wire brush 43873 4 3/4” 4 1/2” 43876 5” 4 3/4” part with 1/4” male 43879 5 1/4” 5” pipe thread.

HAND BRUSHES Stock # Brush Size Brush Length 41228 2” 4 1/2” 41238 3” 4 1/2” FOR 41248 4” 4 1/2” CHIMNEY SWEEPS RECTANGULAR & OVAL BOILER BRUSH Double spiral, 4 1/2” long black oil tempered wire brush part with 1/4” male pipe thread. Oval shaped brushes have a rounded edge, rectangular brushes have a square edge. A. Black Tampico 13” overall Millbury Duster for sweeping up piles Stock # Brush Size of ashes & creosote that collect on the hearth. 8”bristle fill. Rectangular Boiler Brush 728 12/cs 10 lbs. B. Fireplace and Smoke Shelf corrosive resistant Polypropylene Brush. 13411 2” x 4” 805-LH 12/cs 9 lbs. 13412 2 1/2” x 4 1/2” C. Wire “U” Brush with stiff wire bristles (1/4” NPT fits 106XX rods) 13413 3” x 5” Use 1/4” to 3/8” reducer to fit 3/8” fittings. Oval Shape Boiler Brush 36360 6/cs 7 lbs. 13417 2” x 4” D. Wire Duster Type Scratch Brush for cleaning nooks, crannies and awkward corners. 13418 2 1/2” x 4 1/2” 204-H 12/cs 5 lbs. 13419 3” x 5” E. Curved Handle Brush 202-H 3 row wire bristles 12/cs 5 lbs. 201-H 4 row wire bristles 12/cs 6 lbs. DOUBLE STEM RECTANGULAR BOILER BRUSH

COUPLINGS/ Double spiral, 4 1/2” long black oil tempered PULL RINGS wire brush part with 1/4” male pipe thread.

Stock # Description Thread Size Wght Stock # Brush Size 36352 Reducer 1/4” to 3/8” .12 13390 1 5/8” x 4” 36353 Coupling 1/4” .12 13391 2 1/2” x 6” 36354 Coupling 3/8” .12 36350 Pull Ring Loop to 1/4” .12 13392 3 1/2” x 6 5/8” 36351 Pull Ring Loop to 3/8” .12

198 PROFESSIONAL CHIMNEY BRUSHES 3/8” THREAD All our professional chimney brushes have extra heavy 1/2” dia. stems, con- structed with four lengths of .162 dia. galvanized wire. Plated shaft with 3/8” male pipe threads are secured to the stems for easy coupling to our heaviest fiberglass rods. PRO-CLEAN POLY ROUND Stock # Size SPECIAL SIZES 33166 6” 33176 7” Master Sweep AVAILABLE 33186 8” CHIMNEY BRUSHES ON REQUEST 33206 10”

ROUND SQUARE RECTANGULAR Stock # Size Stock # Size Stock # Size 33056 5” 33266 6” 33410 6” x 10” 33066 6” 33277 7” 33411 7” x 11 33076 7” 33288 8” 33412 8” x 12” 33086 8” 33299 9” 33413 9” x 13” 33096 9” 33310 10” 33414 10” x 14” 33106 10” 33311 11” 33415 11” x 15” 33116 11” 33312 12” 33416 12” x 16” 33126 12” 33314 14” MS-14 14”

FIBERGLASS RODS Pipe Strong. extruded fiberglass rods in a Stock # Dia. Length Thread variety of diameters provide the 30664 .350 4’ 1/4” proper stiffness for most jobs. We 30666 .350 6’ 1/4” 36048 .440 4’ 3/8” recommend using these nonconduct- 36072 .440 6’ 3/8” ing fiberglass rods whenever possible.

NYLON BRUSH RODS Stock # Dia. Length Thread Very strong, flexible rods for ducts 36112 5/16” 4’ 5/16-18 and radical bends. 5/16” rod for pellet 36114 3/8” 4’ 1/4 NPT vent #36126 & #36128 brushes. 25P-5 3/8” 5’ 1/4-20 Stock # Handle Length FLUE BRUSH HANDLE* 30328 3’ Semi-flexible, twisted galvanized 30438 4’ wire with one female end and 30548 5’ 1” ring at other end. 30658 6’ Extension Handle for above 31448 5’ PELLET VENT BRUSHES

36126 and 36128 have a ball tip with a 5/16 - 18” male thread For cleaning pellet stoves and connector (use with 36112 nylon rods) 36133 and 36134 regular dryer vents, these brushes are tips (suitable for straighter runs) with 1/4” NPT male pipe designed to navigate a sharp thread. turning radius without get- ting caught in elbows, offsets, etc. 3” and 4” round sizes are available. Brush filament is 0.020” poly.

Stock # Description Stock # Brush Size Weight 17409 3” brush w/10’ flexible handle; 4/cs; 2.7 lbs. 36126 3” .10 17419 3” brush w/20’ flexible handle; 4/cs; 3.9 lbs. 36128 4” .12 17410 4” brush w/10’ flexible handle; 4/cs; 2.7 lbs. 36133 3” .14 17420 4” brush w/20’ flexible handle; 4/cs; 4 lbs. 36134 4” .18

199 TURBOSWEEPER® Picks up large chunks as well as the smallest soot particles

TurboSweeper is up to the toughest cleaning job. It sucks up the large chunks of debris found in oil and gas flues, on smoke shelves and in fireboxes as it returns large quantities of cleaned air (up to 100CFM) to the room during the process. De- signed specifically for professional sweeps, this portable vac is the perfect com- panion to the Soot Sweeper. Turbosweeper’s 1 HP-100CFM motor is selfcooling and won’t burn out if the front end of the hose clogs. Suction capacity: 86” of lift. It’s washable coarse dacron filter bag covers a fine cotton liner for double-filtra- tion capturing even microscopically fine dust and particles as small as 5 microns. It’s engineered to take the abuse from constant daily use. The high-density poly- ethylene body is compact, weighs just 27 Ibs. and is dent and rust proof. The crush-proof 1 1/2” vinyl suction hose is a generous 10’ long with molded vinyl cuffs. The supplemental 7/8” x 4 foot metal hose attaches to reach those annoy- ing soot-filled crevasses and cracks. The hose has a positive-locking fitting that smoothly swivels 3600. Five year vacuum, two year motor warranty. Wgt AWS-700 Turbo Sweeper 1/cs ProKleen® Wizard System WRL-100 Wizard Assy. w / PROKLEEN® adapter WRL-ADP1 PROKLEEN® Loop Adapter 1/cs 2 lbs. WTB-16 PROKLEEN® Creosote Remover 4/cs 1.7 lbs. WTB-44 PROKLEEN® Small Tile Breaker 4/cs 2.5 lbs. WTB-46 PROKLEEN® Large Tile Breaker 1/cs 3.7 lbs. WTB-44HD PROKLEEN® Double Tile Breaker 1/cs 5 lbs. WRL-ADP2 1/2” Adapter w/LockFast

ProKleen® Steel Rods 57S-10LF 1/4” x l’ Steel Rod 10/cs 3.3 lbs. 57S-25LF 1/4” x 2 1/2’ Steel Rod 10/cs 7.6 lbs. 57S-50LF 1/4” x 5’ Steel Rod 10/cs 12.6 lbs. To order item with LOCK FAST fittings, add the suffix LF to the item number., ie. 57S-50LF PROFLEX® BORING ProFlex® Boring Tools— Rutland’s ProFlex® Boring provides heavy impact for penetrating tough obstructions or breaking up flue tiles for removal. Male/female adapter may be needed. (A)PF-1740 Boring Tool 6/cs 9.0 lbs. ProFlex® Scrapers— The Half Round Scraper reaches into corners to dislodge creosote accumulations. The Hinged Drop Scraper slips past the obstruction in the folded closed position, it opens to lift objects like bricks and mortar chunks. (B)PF-1754 4” Fixed Scraper 6/cs 3.0 lbs. (C)PF-1756 6” Fixed Scraper 6/cs 4.5 lbs. (D)PF-1764 4” Hinged Scraper 6/cs 3.0 lbs. (E)PF-1766 6” Hinged Scraper 6/cs 4.5 lbs. ProFlex® Retrieving Tools— Retrieve foreign objects lodged inside flues, includ- ing stuck brushes and rods. (F)PF-1745 Retrieving Tool 6/cs 5.0 lbs. ProFlex® Double Worm Screw— Ideal for removing bird nests and other block- ages. Male/female adapter may be needed. (G)PF-1730 Double Worm Screw 6/cs 3.0 lbs. ProFlex® Brass Clearing Wheel— Attaches to the SweepsALl® brushes to guide rods around tight corners. It screws into the top of the brush to let the brush roll freely avoiding hang-ups as it pushes minor blockages loose. (H)PF-1710 Brass Clearing Wheel 6/cs 3.5.0 lbs. ProFlex® Harpoon— Recovers foreign objects, pierces and extracts bulky materials. Chips away tough glaze build-up in corners and crevices. (I)PF-1720 Harpoon 6/cs 6.0 lbs. ProFlex® Adapters— Allow for interchanging ProFlex® system rods and tools with other rod and brush systems. All brass male and female con- struction. (J)PF-1770 Female/Female 6/cs 1.0 lbs. (J)PF-1780 Male/Female 6/cs 1.5 lbs.

200 Designed in Vermont where wood burning is a necessity

Model # 400A Ash Vacuum For fast cleanup of Pellet Stove, Wood Stove, and Fireplace Ash and Debris

Finally, here is an economical Hepa Filtered Ash Vacuum for cleaning up and around your pellet stove, wood stove, or fireplace. The convenient Hearth Country Ash Vacuum is the Product Features: safe and sensible fireplace ash remover. The versatile Hearth • Powerful 820 W motor, 85 CFM Country ash vacuum can be used to safely remove COLD • Dust Free HEPA filtration fireplace ash, dust, wood stove debris, construction • Spark arrestors screen pre-filter debris, sheetrock dust, and cat litter. The built-in Shake- • Aluminum hose and pick-up tube, Off vibrating filter may be activated to clear filter build- 5 feet total up while keeping the dust-proof lid in place. The spring • 4 gallon canister loaded Shake-Off activator vibrates the HEPA filter with • Shake-off vibrating filter cleaning the vacuum turned off cleaning away much of the build-up • Quiet 80 db sound level thereby restoring suction power. While not designed for use on hot embers debris enters the vacuum straight down. This • No expensive bag filters to replace minimizes the chance of hot embers damaging the machine. • Powder coated black canister A metal mesh pre-filter further protects the HEPA filter from • Double insulated metal bottom damage by hard or warm debris. The lightweight Hearth on canister Country Ash Vacuum weighs only 8 pounds. • Replacement HEPA filter Item # 411 Model # 400A • Pellet Stove small/tool 3 piece Retail Package UPC 8-41972-00400-5 accessory kit 13”L x 13”W x 15”H 36 Units/Pallet Item #412

FOR COLD ASH PICK-UP ONLY! Be sure no hot embers are present before removing ash or debris. Store debris out doors to avoid accidental ignition.

201 VIDEO INSPECTION SYSTEM RoVac® B&W Video Inspection System for Chimneys and Dryer Vents

A. W. Perkins Company is pleased to place as the ball is sent through the vent rods. With the centering arms holding the introduce the highest quality, battery op- being inspected. Locate problems such as assembly securely in the center of the flue erated black and white video inspection blockages and disconnected vents easily. the camera freely rotates 360° to inspect system that will inspect chimneys, dryer Get a good look at vents prior to quoting the chimney for loose or missing mortar, vents and air ducts. All at a price that is a job, a must for commercial work. A great cracks, etc. Also includes 12” ButtonLok under $1250! way to show your customers those con- handle with swivel camera end for smoke The high res camera is housed in a vincing “before” and “after” shots. chamber inspection. Connect an “analog splashproof machined aluminum cylin- For chimneys you utilize the included to digital” converter to the RCA out and der. It is used by placing it into one of the centering device while the camera is held plug into computer to document work. two 3” balls where it is secured with a set in the chimney ball. The camera may be screw. 60’ of cable included. The `12 volt used for bottom up inspection by mount- Camera Specs battery lasts up to 15 hours on one charge ing the large Buttonok™ fitting below the • 3.6mm lens • 420 lines resolution powering both the monitor and the cam- centering disk, as shown. The centering • Splashproof housing era’s 10 infra-red LED’s which allow use disk has adjustable arms in three lengths • 10 Infra-red emitters • 0 lux in the total darkness of vents and ducts. included. The centering device may then • Black and White CCD Monitor has RCA video out for recoding be used at the 90° viewing angle or the 45° purposes. Nylon bag holds the entire sys- angle (shown) to more quickly scan the 9621 Dryer Vent & Chimney Video tem. chimney for problems. The centering de- Inspection System. Complete For dryer vents the included Button- vice may also be used from the top down Lok™ spring leader is clicked to the back with our large ButtonLok™ fitting on the 8755 5’ x 7/8” ButtonFlex™ Rods for side of the camera. Then our ButtonLok™ top. The camera may then be lowered Camera System nylon 5/16” or 3/8” rods are clicked in down the chimney using our ButtonFlex™

202 TOOLS OF THE TRADE Pocket LowVoltageTester ‘IMP™’ TUBING CUTTER Our Best Selling A handy tube cutter for cramped Voltage Detector! spaces so often encountered on • Comes with pocket clip and flexible test leads installations or repairs. Only 1- • RANGE: Voltage 5 to 50V AC/DC 11/16” x 1-15/16” x 7/8”. Weighs only 2-1/2 oz.. A mere 1 1-4” clear- BCT-1021 ance is all that is needed to operate the “Imp”. Versatile Multi-sized Part # Tubing O.D. Adaptor TC127 1/8”—5/8” We developed the LMC-2BK REPLACEMENT WHEEL for TC127 over four years ago at the request of a utility comapny in Upstate NY. It RW127 Wheel was developed with the service technician in mind to easily help connect from the manometer or gauge to the pressure supply line being tested. • Easy to use • Solid brass construction • No more time wasted looking TUBING CUTTER for proper bushings, fittings, etc • Built to stand rugged use for a lifetime • Fits NPT sizes 1/4”, 1/2”, 3/4”, 1” • Actual Size: 7 10/16” long For hard or soft copper tubing. Makes clean, right-angle cuts with no burrs LMC-2BK or chips to clog tubing. Features ball ADAPTER TO TEST bearing feed, flare cut-off groove, THERMOCOUPLE & retractable and spare cutting THERMOPILE CLOSED wheel. Rugged aluminum alloy body CIRCUIT is designed for handling ease. These adaptors are used to make Part # Tubing O.D. closed circuit tests of the thermo- List couples and thermopiles using TC274 1/8”—1-1/8” suitable millivolt test meters. REPLACEMENT WHEEL for TC274 10-038 Thermocouple RW274 Cutting Wheel 10-238 Thermopile BAR CLAMP SELF DRILLING PIPE SCREWS Built-in drill tip allows for easy 1-step installation. Black. FLARING TOOL Flares 7 sizes of soft copper, alu- PSCR-10 10 Pack minum and brass tubing. Forged PSCR-200 200 Box steel slip-on yoke and hardened PSCR-500 500 Each Jar flaring bar. Yoke design permits flaring where there is little space between nut and tube end. Positive clamping of bars prevents tube slippage. Hard DRILL-IN STAINLESS chrome-finished swivel-type cone makes better flares with less effort. Satin finish nickel-chrome plated. SCREWS Part # Tubing O.D. HW8x1/2SS 1/2" DRILL-IN FT195 3/16, 1/4, 5/16, SCREWS 1/4" HEAD SIZE 3/8, 7/16, 1/2, 5/8” High quality standard self drilling sheet metal screws. Stainless steel. Type A single thread. Indented hex washer SPRING TUBE BENDERS slotted head. Part # Desc. HW8x1/2SS 100 per 100 ABS-6 Tube Bender 3/8 OD ABS-8 Tube Bender 1/2 OD HW8x1/2SS 1000 per 1000

Roper Whitney RIVETER & RIVETS “Pexto” Crimping and Beading Machine Furnished with ogee bead rolls and crimp- ing rolls for one pass combined crimping and beading operation. Adjustable for deep or shallow beading 2 in 1 HAND RIVETER and for fade away crimping. Stainless Rivets and Stainless Mandrel Maximum capacity steel is 24 gauge. SS/SS44D MALCO BLIND RIVETS 1/8" Description Pcs/Ctn per 100 90-017 Beader/Crimper 1 per 1000

203 TOOLS OF THE TRADE METAL DOUBLE CUT AVIATION SNIP STOVE PIPE Double cut design is ideal for cutting metal pipe or duct. Double cut design CRIMPERS removes a curled strip of metal from path with virtually no surface distor- tion. Double cut also features adjust- able taper ground outer . Offset C5 DOUBLE CRIMPER handle design aids maneuverability Our most popular crimper. Double crimps, 5 . and also protects user's hands. SC3 SINGLE CRIMPER For heavier gauge stove pipe. Single crimps, 3 blades. 4R DOUBLE CUT AVIATION SNIP

TL-051 Serviceman's Friend HAND SEAMERS The TL-051 is a must for every service technician since it is so compact, dura- ble and easy-to-use. It can be used to 3” HAND SEAMER connect manometers and gauges to Depth: 1/4” to 1 1/4” gas supply lines as well as Whirlpool® Width: 3 1/4” and several refrigerator supply lines to check pressure. This tool is extremely S2 handy and has been a JHL top ten seller for years. • Hose can be used on either end: One encl has 1/8" pipe thread and 6” HAND SEAMER special 5/16" x 32 thread, other end has regular hose fitting and Depth: 1/4” to 1 1/4” 1/8" straight pipe thread Width: 6” • No more time wasted looking for proper bushings, fittings, etc • Solid brass construction S6 • Built to stand rugged use for a lifetime • Actual size: 1 13/16" long 9” HAND SEAMER Depth: 1/4” to 1 1/4” TL-051 Width: 9” S9

HEX NUT DRIVERS

M2001 Cuts straight or to left Red Handle M2002 Cuts straight or to right Green Handle HHD1 1/4” MAGNETIC HEX DRIVER M2003 Cuts straight or wide curves HHD2 5/16” MAGNETIC HEX DRIVERS Yellow Handle ND8S 1/4” STUBBY NUT DRIVER M2005 Cuts straight in heavy metal ND10S 5/16” STUBBY NUT DRIVER Red Handle

MSH/14 MSHL1/4 Max2000 MSH 1/4 MALCO MAGNETIC Offset CHUCK DRIVER MSHL 1/4 MALCO MAGNETIC Aviation CHUCK DRIVER Snips Jumper Leads • 36” in Length M2006 Cuts sharp left angles, straight line • Alligator clips and plastic and 5” (125mm) diameter circles. insulators to cover metal clips M2007 Cuts sharp right angles, straight line and 5” (125mm) diameter circles. BJL-281 204 TOOLS OF THE TRADE Full-Sized Multimeter Combustible Gas Leak Detector Carbon Monoxide The DM384 is a full-sized multimeter that’s packed The CD100A is the perfect tool for Detector with the high-end features like MIN/MAX capture. gas leak detection. Designed to detect combustible gas leaks in residential capacitance. and frequency. the large LCD display is and small commercial applications, its The “CO backlit for easy viewing. Its combination of durabil- semiconductor sensor responds instanta- Detective” ity, visibility, and functionality are tailored to meet neously to monitors, the needs of trade professionals. all combus- records,and Features tible gases. alerts you to • 750 Volts AC and 1000 Volts DC A flash- the presence • 10 Amps AC and DC ing LED of danger- • .01 µA DC resolution for flame safeguard circuit provides ous carbon testing visual leak monoxide in • Frequency to 40 Megahertz indication ambient air, • Capacitance to 40,000 micro- and a tip- The visual farad light in display con- • Resistance to 40 Megohms the sensor stantly indi- • Continuity cover illu- cates precise • Diode check function minates the quantities • Autoranging area of the while the • Analog bar graph leak. audible • Large, backlit LCD display • 50 ppm minimum detection and visual • MIN/MAX capture and data • Long 18” gooseneck for alarms hold hard-to-reach areas respond to various thresholds • CE listed CAT III • “Tip-light” in sensor cap levels. • Five year limited warranty illuminates the search area • Measures CO (in ambient air) Accessories included, • Sensor provides accurate detection from 0 to 999 ppm Test Leads ATL55 • Audio and visual tic rate, fully • Tri-color LED indicates con- Fuse: 0.5A AF155 adjustable centrations at 3 levels complying Fuse: 12.5A AF160 • Headphone jack with residential and work place Battery Std 9-Volt • 1 year limited warranty standards Boot AH190 CD100 • Auto Zero at turn on RS1000 Replacement Sensor DM410 RS1010 Sensor Cap CO71 MOISTURE METER DRAFT & PRESSURE GAUGE MM100 The MM100 is used to measure the moisture level in MZF Draft Gauge wood, cardboard and paper as well as in hardened The highly sensitive material such as plaster, concrete and mortar. MZF Draft Gauge requires no liquid or Features tedious leveling; this • Range dry type instrument is • Wood: 6~44% always ready for imme- • Material: 0.2~2.0% diate use. The pointer’s • Accuracy movement over scale • Wood: ±1% • Material: ±0.05% is in direct proportion • Operating range tempera- to the magnitude of the ture 32~104 ̊F (0~40 ̊C) draft at the test point. • Relative humidity 0~85% Ideal for residential, • Replaceable electrodes commercial and indus- • Built-in belt clip trial heating plants; to • Ruggedized design measure furnace draft • Auto power off and pressure drop • Battery check test across air filters. • One year limited war- ranty 13-7018 +1.0 to 0 to -5 mm WC 13-7019 +0.05 to 0 to -0.25” WC MM-100 13-7021 +0.05 to 0 to -1.0” WC

205 TOOLS OF THE TRADE Temperature/Millivolt Tester Electronic Manometer The EM100A provides a simple, time- • Shielded temperature probe with saving alternative to U-tube pressure attachment clip measurements. Among the many • Scale graduations: 10° F, 1-10-20 mV possible uses for your EM100A are • 3 year limited warranty measuring gas pressure at light com- Ranges: Temperature 50 to 650°F mercial or residential furnaces and DC mV 50, 500, 1000 checking airflow through filtration systems.

MTV3A EM100A Nail Hole Slot Punch - Vinyl Siding Manometer Kit w/ 30" Hose The NHP1 punches a generous • Durable, economical, gas pressure 5/32” x 3/4” horizontal slot for measuring device adding or elongating nail holes • Easy to read vertical adjusting scale for accu- in vinyl and .019 aluminum rate zeroing siding to accommodate • Come with 30" hose and green dye irregular stud spacing. Part # Description Slot: 5/32” x 3/4” (4.0 x 19.1 mm) A1221-12K 6” length Throat Depth: 5/8” (15.9 mm) Length: 8-1/2” (216 mm) Magnetic Holder NHP1 For 1/4” Hex Shank Insert Bits The Original Malco Sideswiper - Vinyl Siding Hex Opening: 1/4” Shank Diameter: 1/4” Wide body and comfortable vinyl Nose Diameter: 7/16” gripped handle protects knuckles O/A Lenth: 3” and offers leverage and control needed for replacing siding panels. MBH1/4 Durable one piece, spring steel con- struction is virtually indestructible. Double Enders in Bulk Packs SRT1 Length 4-1/4” Packs of 144

Temperature Gun DE1/8B 1/8” DE30B #30 The affordable INF150 puts the convenience of non-contact Step temperature testing in the palm of A unique double flute design your hand. The pistol-grip handle assures the penetration of soft provides superior comfort and or thin materials at the proper 1/4 control, while high-temperature 5/16 speed. Drill hole sizes from 1/8” 3/8 testing and laser targeting add to 1” in sheet metal without 7/16 speed, accuracy, and safety to burring or deforming stock or 1/2 your maintenance and trouble- threading drill bit. Malco Step 9/16 shooting procedures. Drills actually de burr as they 5/8 drill. Perfect for use as a “hole- 11/16 3/4 Features: opening” reamer. They can also 13/16 0° to 700°F (-18°C to 370°C) be used for making round holes 7/8 Laser targeting from slots or intersecting holes. 15/16 7-second auto hold Made of industrial grade high 1 Backlight speed steel. Malco Step Drills Switchable °F or °C readings are heat treated and tempered Built-in carrying strap to assure maximum strength Distance to spot ratio of 8 to 1 for long wearing rugged use. Auto power off Completely resharpenable. Low battery indicator Part # Description One year limited warranty UB20 Drills 8 hole sizes from 9/16” to Accessories Included: Battery, Std 9-volt 1” diameter in 1/16” increments UB3 Drills 9 hole sizes from 1/4” to 3/4” INF155 diameter in 1/16” increments

206 TOOLS OF THE TRADE Softcap Knee Pads Leavey Pilot Foam pad- Cleaning Pump Kit ded to hug Developed over 40 years ago, the Leavey the knees and Pump was the first tool John Leavey cre- covered with ated. The first time you use it, you will tough DuPont wonder how you ever got by without it. CORDURA®. • Heavy duty construction for years of dependable service Non-slip surface • Attashes quickly to hot water heater, furnace, stove, and dryer prevents sliding. • Fits easily into tool box or pocket Long, thick cap • Elimnates the replacement of orifices • Useful in cleaning moisture, carbon, and lint from orifices. improves weight • Useful in removing water from flooded lines distribution, and • Standard length of hose is 5". wider elastic INCLUDED ACCESSORIES straps hold pads more securely. Thicker contoured foam and EBF Brass Fittings for 1/8” - 3/16" and 1/4" PilotTubing Nuts and 1" barrel adjustable closures provide added comfort and mobility. Natural AK114 color cap is non-marring. Adjustable Orifice Cleaner/Reamer TPKP3 SOFTCAP KNEE PADS Ream, enlarge, or check the size of orifices Gas Control Tap Kit • Works with LP and natural gas Refurbish damaged or cross threaded gas • Determine size of a particular orifice connections. Three taps will rework standard • Eliminates extra expense of maintaining a large variety og thermocouple. Main burner and pilot outlets. • Clean, scrape, size, or measure LP or Thread gauge determines proper tap selection. natural gas orifices • Absolute control of orifice size while Kit Contains: 1 TP-TG Pitch thread gauge-18 leaving a burr-free smooth gas passage- 1 TP-1 1/32 DL 1 1/32-32NS DB LD Tap way 1 TP-3/8-18 3/8 x 18 Tap • Approximately the size of a ball point pen 1 TP-7/16-24 Pilot Tap 7/16 x 24 • Four edge contact locates the tool 1 TK Case Empty case for TK centrally in the existing hole and cannot TK Tap Kit change the shape or location of the hole. GST- I series Gas Seal Tape HR 80 to 50 The color-coded, high density Teflon thread scaling tape devel- HC 52 to 31 oped specially for the gas industry. Unasco Gas Seal Tape is manufactured to the highest density ( 1.5g/cm3 ) of any Teflon 20-Piece Orifice Drill Set thread scaling tape on the marker. Ordinary Teflon tape has includes PV1 Pin Vise been stretched during the manufacturing process as a cost cutting measure. Stretching lowers the density of the tape by Wire gauges sizes for increasing it’s poracity. It is not uncommon to find Teflon tape stretched 600% and drilling or cleaning oil more with a void volume greater than 80%. Unasco Gas Seal Tape in unstretched. and gas orifices. Metal GST-004 1/2” Roll DRILDEX container. Sizes: 61 to 80. Includes Match Holder pin vise. The best, most durable match holder out there! FJ6180 If you have not used our EMH match holder yet or only have in the past, you need to check it out. We have improved the Small open end wrenches tip and made rhe whole unit more durable. Our two best selling wrenches! • New thicker, stronger shaft If you do service work on heating • New stronger crimped clip will not come off in heat of flame units, you should have at least one of each of these in your too kit. • Extendable from ball-point pen size to over 2 feet in length. • 15 degree and 75 degree angle openings • Clip to pocket or apron • Same size on each end • For safe easy lighting of: Gas and oil water heaters, gas fire- Part # Size Application place logs, gas furnaces, piloHights, gas ovens, barbecues 1124 3/8" Thermocouple wrench EMH 1128 7/16" Orifice wrench FlexMag Magnetic Pickup Tool Inspection Mirrors • Pickup capacity of 10 lbs. • Shatter-resistant acrylic mirror • Unique ball fitting for quick • Energy ring reduces magnetic side pull positioning • Unique bend shaft system allows permanent positioning • Swivels 180°, rotates 360° or remove inside wire to snake into position • Replaceable mirror • Overall length 23" • Non-slip custom rubber grip • Non-slip custom P\/C grip Extension Mirror Dim. FM-02 MR01 7 3/4” to 38 1/2” 3”W x 4 1/2”L MR02 6 /12” to 27 1/2” 1 3/4”W x 2 1/2”L

207