Checksum Multiwriter VPP X2 Buffer

CheckSum MultiWriter VPP x2 Buffer

VPP x2 Buffer Module (-107) Made in U.S.A.

The MultiWriter † on-board gang programming system over conventional in-circuit tester-based programmers uses patented simultaneous programming technology when parts already mounted on circuit boards must be to program up to 384 chips at one time with up to 16 programmed in a single pass, making it especially effective different types, in seconds instead of the minutes required for multi-board panels. by conventional programmers. The VPP x2 buffer modules insure device programming Compared to other part programming solutions, meets the required critical timing and voltage device MultiWriter delivers significant speed and cost advantages specifications.

The MultiWriter 2 channel VPP x2 Buffer features: • Simultaneous programming for multiple devices, 1 part or 384 parts all at the same time • Non-multiplexed, parallel programming at the max-rated device speed • Relay-switched isolation for signal and power to the programmed device, supports PCB panels • Each channel provides relay-switched isolation for two separate power supplies to the assembly • In-fixture buffer modules insure quality signals to each device • Daisy-chain control signal design for expansion to additional modules • Designed for twisted-pair wiring for all critical signals • Designed to work with ICT (In-Circuit Test) applications • On board +5V power input regulator to 3.3V for stable buffer module power • Differential input signals for SCK, MODE, SDI and EXTRA (spare) with series impedance to the programmed device to eliminate ringing and protect the buffer module • Differential output from device SDO signal to MultiWriter control module • Designed for in-fixture MultiWriter controller, MultiWriter pps system or other ATE systems • Designed for I2C, MON08, BDM, ISSP, PICs using the non-JTAG mode algorithm CheckSum MultiWriter™ Device Support • Universal, In-System (ISP) and Standalone Stations • Simultaneous Device Programming

Actel Altera Analog Devices Atmel Catalyst Cypress

Nonvolatile FPGA EPC Series - FPGA configuration ADE71XX (UART) AT24 Series (I2C) CAT24 Series (I2C) Delta39K IGLOO MAX 3000A CPLD Family AT25 Series (SPI) CAT25 Series (SPI) Ultra37000 Series ProASIC MAX 7000 CPLD Family AT26 Series (SPI) CAT93 Series (Microwire) PSI CPLDs Programmable System Chip MAX 7000A CPLD Family AT45 Family PSoC Fusion MAX 7000B CPLD Family AT91 Family CY8C21XXX / CY8C24XXX MAX 9000 CPLD Family AT93 Series (Microwire) AT90 (AVR8) ATMEGA (AVR8 SPI / JTAG) ATtiny Family

Fairchild FocalTech ‡ Freescale Fujitsu Integrated Silicon Solution Lattice

NM24 Series (I2C) FT5X06 HC908 Series (UART) F2MC-16LX Family (USART) IS24 Series (I2C) MachXO Family NM93 Series (Microwire) FT5X16 HLC908 IS25 Series (SPI) LatticeXP2 Family FT6X06 HC9S08 Series (BDMI) IS34 Series (I2C) LA4000 (JTAG) HC9S12 Series (BDMI) Infineon IS93 Series (Microwire) Macronix ‡ FocalTech exclusive gang HC9S12XD XC86X Series (JTAG) MX25LX Family programming solution. HC9S12XE XC2XXX (JTAG) HC9S12XS XC16X Family (JTAG) Maxim MPC5X (JTAG) TM TLE983X (DAP) SPC56XX (JTAG) DS1086L SPC56XX_NEXUS (JTAG)

Microchip Micron NEC NXP Ramtron Renesas founded by Philips

24 Series (I2C) P5Q PCM Series (SPI) 70F Series (SPI+UART) PCA24 Series Serial Flash/EEPROM/FRAM H8S Family 25 Series (SPI) 78F Series (SPI) LPC ARM7 Series (UART+JTAG) FM24 Series (I2C) M16C Family 93 Series (Microwire) V850 Series (SPI+UART) PCF79xx Series (JTAG) FM25 Series (SPI) R8C Family PIC10F UPD78K0 Series (UART) PCF7X41 Series (JTAG) PIC12F H8S (Flash) 89LPC9XX Series (USART) PIC16F PIC18F ROHM Seiko Silicon Storage Technology Spansion STMicroelectronics PIC24F MCP4xxxxx Digital Pots (SPI) BR24 Series (I2C) S-24 Series (I2C) SST25 Series (SPI) S25FL Series (SPI) M24 Series (I2C) dsPIC30F BR25 Series (SPI) S-25 Series (SPI) M25 Series (SPI) dsPIC33F BR93 Series (Microwire) M34 Series (I2C) M45 Series (SPI) M93 Series (Microwire) Texas Instruments Toshiba Winbond Xilinx ZiLOG M95 Series (SPI) ST7 Family CC253X (SPI) TMP86XY23UG W25 Family SpiFlash XC18V00 ISP PROM Z8 Family STM8 Family TMS470 Family (JTAG) XCF Series Platform Flash STM32 (CORTEX M3) MSP430 Family (UART JTAG/SBW) XC9500 Series CPLD Family CoolRunner II CPLD Family CoolRunner XPLA3 CPLD Family

Note: Devices not listed can normally be supported upon request. Please contact CheckSum for more information: STMicroelectronics devices Email: [email protected] ● Tel 1 877 CHECKSUM / +1.360.435.5510 Revisedrequire 2-Apr-2013 a ST-7 buffer module.

VPP x2 Buffer Module Specifications  Driver Voltage: device dependent, ±16mA output drive at 3.3V  Input Voltage from device 5.5V (max.)  Nominal output impedance: 20 Ohms (buffer to device)  Nominal sensor input impedance >100K Ohms (device to buffer)  Twisted pair wiring recommended between buffer driver/sensor and device  Buffer board nominal power supply requirement: +12V (typical 27mA), +5V (typical 13mA)  Driver/sensor buffer boards designed to be mounted in a bed-of-nails test fixture  ESD Protection Exceeds JESD 22  Buffer board dimensions: single 2.5” x 2.125” (6.35 cm x 5.4 cm)

CheckSum LLC 6120 195th Street NE Arlington, WA 98223 Fully Tested Tel: 1.877.CHECKSUM CheckSum, MultiWriter and MultiWriter pps are trademarks of CheckSum LLC. Other product names are trademarks of their respective owners. Final appearance Tel: +1 360.435.5510 of the delivered product may vary from the photographs shown herein.

Fax: +1 360.435.5535 † MultiWriter Technology is protected under U.S. Patent No. 7,802,021.