Technical Manual
CT / CTS / CTM / CTMS / CBT / CBTM SECTION 10
Tools and Accessories FOX1 / FOX2
© 2009 by Thermoplan AG, Subject to change REV-5 10.1 Technical Manual
Document: Tools and Accessories SECTION 10
Modification journal
Revision: Date: Modifications Inicials: 0 2009-04-30 Basic document, first edition RZ 1 2009-10-26 Supplement „Stainless steel container 5 L“ MB 2 2009-02-09 Added „Extension coffee outlet“ and „Cup frame“ RZ 3 2010-05-03 Milkcontainer and Tetrapack attachement MB 4 2010-10-13 Removed „Extension coffee outlet“, added „Cup frame for RF“ SO 5 2010-10-18 Moved „Milkcontainer and Tetrapack attachement“ to 10, removed „milk bags“, added „Cleaning cover coffee spout“ SO 6 7 8 9 10 Overview modification
REVISION REVISION REVISION Page Page Page
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10
1 x
2 x
3 x
4 x
5 x
6 x
7 x
8 x
9 x X X x
10 X X x x
11 X
12 S x
X Changes in content, corrections S New paging
© 2009 by Thermoplan AG, Subject to change REV-5 10.2 Technical Manual
Inhalt SECTION 10
Tools and Accessories 10.4 - 10.6
General tools 10.7
Loctite 10.8 - 10.9
Bean hopper 10.
Milkcontainer and Tetrapack attachement 10.10 Cleaning cover coffee spout
Thermoblue and cleaning accessories 10.11
Cup frame 10.12
© 2009 by Thermoplan AG, Subject to change REV-5 10.3 Technical Manual
SECTION 10 Tools and Accessories
1. Drift / Permaglide Art. No. 105.940
2. Setting gauge mills Art. No. 101.681
3. Press-fit tool scraper ring Art. No. 101.659
4. Assembly tool for scraper ring Art. No. 105.398
5. Service - help for mechanical unit Art. No. 106.409
© 2009 by Thermoplan AG, Subject to change REV-5 10.4 Technical Manual
SECTION 10 Tools and Accessories
2. 6. Pushout tool for AMP-connection pins Art. No. 100.677
7. Sparepart tip for pushout tool for AMP-connection pins Art. No. 101.801
8. Pushout tool Molex plug Art. No. 100.680
9. Digital scale Art. No. 105.091
10. Molykote Lubricating grease 50g Art. No. 101.979
© 2009 by Thermoplan AG, Subject to change REV-5 10.5 Technical Manual
SECTION 10 Tools and Accessories
11. Grease silikon Molycote Art. No. 101.983
12. Teflontape Art. No. 107.247
© 2009 by Thermoplan AG, Subject to change REV-5 10.6 Technical Manual
SECTION 10 General tools
1. Drift on heating element (diameter 4.00 mm) Art. No. 101.618
2. Drift / Bearing on drive block (diameter 3.00 mm) Art. No. 101.609
3. Torx screwdriver TX20 Art. No. 107.310
4. Ring spanner D 14 x 15mm Art. No. 105.412
5. Hexagon socked head wrench - set PB Art. No. 106.876
6. Box of socket spanner Art. No. 106.757
© 2009 by Thermoplan AG, Subject to change REV-5 10.7 Technical Manual
SECTION 10 Loctite
1. Loctite 5331 (Threadsealant) Art. No. 104.077
Loctite 5331 is recommendet for use on plastic pipe threaded fittings carrying hot or cold water. Potable water approvals permit its use in contact with drinking water.
2. Loctite 542 brown (Threadlocking) Art. No. 104.074
Loctite 542 is designed for the locking and sealing of plastic and metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Remove with standard hand tools.
3. Loctite 270 green (Threadlocking) Art. No. 104.076 Loctite 270 is designed for the permanent locking and sealing of threaded fasteners. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Typical applications include the locking and sealing of large bolts and studs (M25 and larger) For disassembly apply localized heat to nut or bolt to apprx. 230°C. Disassemble while hot. 4. Loctite 243 blue (Threadlocking) Art. No. 104.073 Loctite 243 is designed for locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. For disassembly in rare instances where hand tools do not work of execssive engagement length, apply localized heat to nut or bolt to approximately 250°C. Disassemble while hot.
5. Loctite 222 purple (Threadlocking) Art. No. 104.078 Loctite 222 is designed for locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. For disassembly in rare instances where hand tools do not work of execssive engagement length, apply localized heat to nut or bolt to approximately 250°C. Disassemble while hot.
© 2009 by Thermoplan AG, Subject to change REV-5 10.8 Technical Manual
SECTION 10 Loctite
6. Loctite 7400 tamperproofing coating Art. No. 104.081
Loctite 7400 is a solvent based dark red marking ink for use on electronic equipment. The product dries quickly and has excellent adhesion to a range of materials. It is ideal for tamperproofing adjustment points or marking components to indicate they have been set or tested.
Bean hopper
1. Bean hopper 1.5 kg Art. No.: 100.924
2. Bean hopper 2.2 kg Art. No.: 108.608 lockable not lockable 100.923 1.5kg 100.924 1.5kg 108.607 2.2kg 108.608 2.2kg
108.421 101.313 106.069 101.312 3. Bean hopper 1.5 kg lockable Art. No.: 100.923
106.070
108.328 108.327 4. Bean hopper 2.2 kg lockable Art. No.: 108.607 110.096 lockable not lockable 100.923 1.5kg 100.924 1.5kg 101.371 108.607 2.2kg 108.608 2.2kg
108.421 108.302 101.313 106.754 106.069 101.312 103.638
106.070
108.328 108.327
110.096 100.915 (1.5kg)
101.371 100.901 (2.2kg)
108.302 106.754 102.873 117.763 103.638
100.930
© 2009 by Thermoplan AG, Subject to change REV-5 10.9 100.358 117.763
101.881 100.915 (1.5kg)
100.901 (2.2kg) 102.922 103.684
105.043 102.873 117.763
100.930 102.640 102.635 104.031 100.358 117.763
101.881
102.922 103.684
105.043
102.640 102.635 104.031 Technical Manual
SECTION 10 Milkcontainer and Tetrapack attachement
1 Stainless steel container 5,0 lt. 65 00 Tetrapack attachment assy. Art. No.: 100.729 Art. No.: 118.698
13 4 Press-in buffer ø13x4 Art. No.: 106.753
118.698
106.753
Cleaning cover coffee spout e d e v Cleaning cover coffee spout xc lus i modifié o u san s e t, so i oduit , e Art. No. 119.603 r s p opriét é r e r e que la p t moplan SA . êt r - m e The r de ne peu t f identiel e t e rit e c co n quelque fo r t s sou s t ion é s moplan S A de ss in e e ansm i r C The r t l'autoris a
20 1 Kleber Warnhinweis "Etiquette d'avertissement (""!"")" 103.775 71.46.77 10 1 Schutzabdeckung Kaffeeauslauf BW3 Paroi de protection sortie café nettoya 119.602 Pos. Qty. Bezeichnung / Normbez. Werkstoff Désignation / Handelsname Werkstoff Referenz Normteil / Standardteil Ref. Old Ref. General tolerances: ISO 2768-fH Thermoplan AG CH-6353 Weggis Old Nr.: Scale: 1:2 Date Name Creation 2010-09-21 A. Suter Paroi de protection sortie café nettoya Drawn 2010-09-21 A. Suter Checked 2010-10-14 C. Huber Schutzabdeckung Kaffeeauslauf BW3 komp. PDF 2010-10-14 A. Suter A Freigabe 2010-09-21 ASU Weight 179.0 A4 Rev. Description Date Name Volume 0.0 119.603/A Quality control Overall dimensions Page TPA 001 - 160x142x95 File name : 119.603_Schutzabdeckung_Kaff_00165994.dft 1 / 1
© 2009 by Thermoplan AG, Subject to change REV-5 10.10 Technical Manual
SECTION 10 Thermoblue and cleaning accessories
1. thermoblue
Art. No Description
106.801 thermoblue 1 Liter 105.347 thermoblue 2.5 Liter 106.802 thermoblue 5 Liter
2. Dosage pump for thermoblue
Art. No Description
105.127 Dosage pump for Thermoblue 2.5 Liter 105.128 Dosage pump for Thermoblue 5 Liter
3. Cleaning tablets
Art. No Description
105.371 Cleaning tablets, International (1 box with 90 tablets) 105.365 Cleaning tablets (1 cardboard box with 36 boxes)
5. Cleaning brush large Art. No. 105.355
6. Cleaning brush small Art. No. 105.352
© 2009 by Thermoplan AG, Subject to change REV-5 10.11 Technical Manual
116.647 SECTION 10 Cup frame
1. Cup frame BW3 CT assy. 117.433 Art. No. 116.647
117.101 117.398
117.400
117.434 2. Cup frame BW3 CTS assy. Art. No. 117.101
117.398 Doc.: 116.647_Tassenrahmen_BW3_00151448.dft Page 1 de 1
117.400
117.399 3. Cup frame BW3 TS assy.
Doc.: 117.101_Tassenrahmen_BW3_CTS_00151438.dft Page 1 de 1 Art. No. 117.310
117.398
117.400
117.399 4. Cup frame BW3 RF assy. Art. No. 117.310
118.865
118.866
© 2009 by Thermoplan AG, Subject to change REV-5 10.12
Doc.: 119.121_Tassenblech_rahmen_s_00163551.dft Page 1 de 1