Exterior Sign Standards
May 2016
Prepared by: Roll Barresi & Associates 48 Dunster Street Cambridge, Massachusetts 02138 t. 617-868-5430 www.rollbarresi.com Division III.19 Campus Sign Standards
Exterior Signs The following section provides drawings, elevations, and layouts for Duke University Exterior Signs. The Consultant should consult with the Project Manager for current fabrication details for the Exterior signs.
All exterior signs must conform to these standards and must be approved by the University Landscape Architect. Exterior Sign Standards
TABLE OF CONTENTS
Introduction
Principles
Approach
A. Campus Signs Graphic Standards 00.1-00.4 Kit-Of-Parts 00.5-00.7 Primary Building ID Sign 01.1-01.7 Large Secondary Building ID Sign (Bronze) 02A.1-02A.2 Small Secondary Building ID Sign (Bronze) 02B.1-02B.2 Large Secondary Building ID Sign (Painted) 02C.1-02C.2 Small Secondary Building ID sign (Painted) 02D.1-02D.2 Double Posted Directional Sign 03.1-03.6 Single Posted Directional Sign 04A.1-04A.6 Small Single Posted Directional Sign 04B.1-04B.3 Street Name Sign 05.1-05.5 Parking ID, Visitor Lots 06.1-06.6 Parking ID, Reserved Lots 07.1-07.3 Bus Stop & Bike Route Sign 08.1-08.3 Parking Rate Sign 09.1-09.5 Large Pedestrian Route Sign 10A.1-10A.3 Small Pedestrian Route Sign 10B.1-10B.3 Large Regulatory Sign 11A.1-11A.5 Small Regulatory Sign 11B.1-11B.4 Accessible Building Entrance Sign 12.1-12.3 Campus Map Display Kiosk 13.1-13.6 Traffic Sign 14.1-14.3 Traffic Circle Sign 15.1-15.4 Vinyl Graphics 16.1-16.2 Pavement Markings 17.1
B. Temporary Signs Temporary A-Frame Sign 30.1-30.2 Temporary Yard Sign 31.1-31.2 Construction Project Sign 32.1-32.5 Work In Progress Sign 33.1-33.2 Exterior Sign Standards
INTRODUCTION
The Goals of the Duke University Sign Program are to make the University more welcoming and accessible; to provide information clearly and consistently; to minimize the number of signs (clean up existing sign clutter); to enhance the appearance of the campus and preserve the scale of the landscape.
These Sign Standards have been refined over time and reflect lessons learned in the initial implementation of the program as well ever evolving wayfinding requirements as the campus continues to develop and change.
This manual has been prepared for the Duke University Landscape Architect and reflects and supports the goals for the 2024 Campus Master Plan and the 2012 Action Plan.
Mark Hough, FASLA, University Landscape Architect Exterior Sign Standards
PRINCIPLES
The following principles provide the foundation of our work for the Duke University Sign Program. They are elaborated on and reinforced in the pages that follow.
1. User-Oriented Program: Problems should be looked at from the point of view of the visitor. How does the visitor perceive the University? What expectations does he/she have? Solutions should be directed toward those visitors least experienced with the Duke University Campus.
2. Priorities: It is impossible to list all possible destinations at any given decision point. (People will not assimilate or retain more that three or four messages at a given point.) Therefore, Priorities must be established to provide information to those destinations with the highest use by un-escorted visitors.
3. Visitor Parking: Visitor parking areas should not only be viewed as high priority destinations, but also as places to orient and inform first-time visitors.
4. Consistency: The signs must work as a system so that the visitor can quickly become familiarized with the signing and can develop expectations (in effect, know “where to look” for information). The signing should be consistent in color, scale and placement. Messages should also be consistent so that the same nomenclature is used on pre-trip information, verbal confirmation, directional signing in route, and finally, identification signing at the destination.
5. Need to Know: New signing should be implemented on a “need to know” basis. No additional information should be provided unless it is absolutely necessary. Eliminate non-essential information and sign clutter whenever possible.
6. Aesthetics: The signs should be attractive as well as informative. They should fit in with the Duke University campus setting and complement both the architecture and the landscape.
7. Coordination: signage should be part of all campus planning and design efforts so that traffic circulation, lighting, architectural and landscape improvements are all integrated as the campus evolves.
8. Maintenance: Signage should be designed so that initial installation, updating and maintenance are within the capabilities of University staff. Exterior Sign Standards
APPROACH
The highest concern is for the first time visitor, therefore, wayfinding information focuses directions to the West and East campuses and to key first-time visitor destinations which include the following:
- Undergraduate Admissions (Admissions) - Athletic Facilities (Athletics) - Alumni & Visitor Center (Visitor Center) - Campus Center & Theaters - Duke University Chapel (Chapel) - Nasher Art Museum - Sarah P. Duke Gardens (Duke Gardens) - Visitor Parking
The Campus Center term encompasses Page Auditorium, West Union, Bryan Center, and the Penn Pavilion. This all encompassing term helps to reduce the number of destinations needed on directional signs and is intuitive as a visitor destination.
The terms in parenthesis are abbreviated versions for use on directional signs, improving legibility and comprehension for vehicular traffic.
The University has a strong and clear peripheral road system, therefore the sign program emphasizes moving traffic along the campus perimeter. The intent is to minimize inter-campus circulation, thus reducing traffic congestion and reducing the need for on-campus directional signage.
Parking at the Campus Center Garage, the Science Drive Lot and the new parking garage on the corner of Science Drive and Cameron Blvd. are critical visitor parking resources closely associated with key first-time visitor destinations including Athletics, the Campus Center, Chapel and Theaters. The sign program directs visitors to these resources and clearly distinguishes them as visitor parking, as opposed to faculty, staff and students.
Finally, a major issue on campus is sign clutter. The proliferation of signage particularly temporary A-Frame and event signage, and regulatory parking signs has a significant negative impact on the appearance of the campus. It is the goal of the exterior sign program to establish standards and guidelines for temporary signage as well as permanent regulatory signs to consolidate and reduce the number of signs and establish consistency. Reducing sign clutter and providing a consistent look will improve the appearance of campus and reduce confusion. Less is more. Exterior Sign Standards
A. CAMPUS SIGNS
Exterior campus signs have been designed as a kit-of-parts that can be implemented in phases and is designed to be appropriate to all areas of the campuses.
The graphic standards are the building blocks of the sign program: typography, symbols, color and the use of the Duke University logo are shown on the graphics standards pages which follow and then are applied comprehensively to each sign type. It is important to adhere to these specifications in order to ensure a consistent appearance for all sign types.
The Exterior Signage is divided into categories defined by function as follows:
- Identification - Direction - Regulation - Information
The following sign type drawings include criteria for the function of each sign, information and specifications for materials, colors and graphics as well as details for fabrication and panel text layouts. These standards are designed to be flexible; additional layouts within each sign type will be added as the program evolves. Exterior Sign Standards
A. CAMPUS SIGNS
Graphic Standards 00.1-00.4 Kit-Of-Parts 00.5-00.7 Graphic Standards Exterior Sign Standards Type Styles 00.1
Adobe Garamond Semibold is the primary Interstate light is used in various formats for signage typeface. It is used in all caps format secondary information. for the identification of building names, parking The Manufacturer of Interstate is The Font lots and garages and, to maximize legibility, Bureau, Inc., 179 South Street, 7th Floor, upper and lowercase format for directional Boston MA 02111. No substitutions will be information . allowed. The Manufacturer of Adobe Garamond is Adobe See the following pages for letterspacing Systems Inc., 345 Park Avenue, San Jose, CA specifications. 95110. No substitutions will be allowed, as there are significant differences between manufacturers.
ABCDEFGHIJKLMNOP QRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 1234567890
Adobe Garamond Semibold A
ABCDEFGHIJKLMNOP QRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 1234567890
Interstate Light B Graphic Standards Exterior Sign Standards Type Styles 00.2
Proper letterspacing is a critical factor affecting roman capitals format is 50 em/1000. not only the appearance of the signs and Adjustment of kerning pairs will always be graphics but also their legibility. In general, necessary and will be the responsibility of the upper & lowercase format should be provided Sign Contractor, with review and approval by with some additional letterspacing equal to 25 the Landscape Architect. em/1000 minimum (as defined by Adobe Illustrator) to compensate for site distances and the glow from reflective sheeting. If line length is limited letterspacing can be reduce to a minimum of 10 em/1000. All caps format requires additional letterspacing to enhance legibility and improve the appearance of the letters. The letterspacing for DUKE CHAPEL Adobe Garamond Semibold - All Caps A 50em/1000 Chapel Adobe Garamond Semibold - Upper and Lowercase B 25em/1000 STREET Interstate Light - All Camps C 50em/1000 Rate Interstate Light - All Camps D 10em/1000 Graphic Standards Exterior Sign Standards Symbols & Arrows 00.3
Shown below is a selection of regulatory The University logo has been modified for symbols likely to be required. application on signage and should be restricted to signage only. Logo artwork for print Most of the regulatory symbols shown are from applications can be obtained from the the system of Symbol Signs developed by the University. U.S. Department of Transportation (D.O.T.) Artwork for symbols is available in digital vector Logo artwork for signage is available in digital formats suitable for both PC & Macintosh. vector formats suitable for both PC & Macintosh. All square symbols to have Standard Blue This page is not to be used for reproduction. Background with Standard White symbol and border. All Round parking symbols to have Standard White Background, Standard Black Symbol and Standard Red Circle and Rule. measured by height measured by height
Duke University Logo Visitor Parking A No Scale
Standard White outline
Duke Blue interior
Information Wheelchair Accessible measured by height
Duke Athletics Logo B No Scale
Bus Bike Route measured by width and height of square
Reserved Parking Parking Prohibited Arrows Symbols C D No Scale No Scale Graphic Standards Exterior Sign Standards Standard Colors 00.4
The standard colors for the sign program are The finishes on all signs shall match Mathews listed below. Paint finishes should match the Acrylic Polyurethane Semi-gloss unless color listed first. otherwise noted in the drawings. Since the signs will be produced in a number of ways, matching standards for inks and vinyl graphics are shown - where applicable. These are the only colors permitted in the production of Duke University signs.
Color Specifications
Standard White Paint/Silkscreen/Vinyl: to match 3M Scotchcal 220-20 Matte White Reflective Sheeting: to match 3M Scotchlite 280-10
Standard Black Paint/Silkscreen: to match PMS Process Black Vinyl: to match 3M Scotchcal 220-12, Matte Black
Standard Red Paint/Silkscreen/Vinyl: to match 3M Scotchcal 220-13, Tomato Red Reflective Sheeting: to match 3M Scotchlite 280-72, Red
Standard Blue Paint/Silkscreen/Vinyl: to match 3M Scotchcal 220-47 Intense Blue Reflective Sheeting: to match 3M Scotchlite 280-76, Light Blue
Standard Dark Brown Paint: to match Glidden LifeMaster Pro # 6946
Duke Blue Paint/Silkscreen: Pantone 287C Vinyl: to match 3M Scotchcal 220-47 Matte Intense Blue
Duke Dark Blue Paint to match 2767C Exterior Sign Standards
A. CAMPUS SIGNS
Primary Building ID Sign 01.1-01.7 Large Secondary Building ID Sign (Bronze) 02A.1-02A.2 Small Secondary Building ID Sign (Bronze) 02B.1-02B.2 Large Secondary Building ID Sign (Painted) 02C.1-02C.2 Small Secondary Building ID sign (Painted) 02D.1-02D.2 Double Posted Directional Sign 03.1-03.6 Single Posted Directional Sign 04A.1-04A.6 Small Single Posted Directional Sign 04B.1-04B.3 Street Name Sign 05.1-05.5 Parking ID, Visitor Lots 06.1-06.6 Parking ID, Reserved Lots 07.1-07.3 Bus Stop & Bike Route Sign 08.1-08.3 Parking Rate Sign 09.1-09.5 Large Pedestrian Route Sign 10A.1-10A.3 Small Pedestrian Route Sign 10B.1-10B.3 Large Regulatory Sign 11A.1-11A.5 Small Regulatory Sign 11B.1-11B.4 Accessible Building Entrance Sign 12.1-12.3 Campus Map Display Kiosk 13.1-13.6 Traffic Sign 14.1-14.3 Traffic Circle Sign 15.1-15.4 Vinyl Graphics 16.1-16.2 Pavement Markings 17.1 Sign Type 01 - Primary Building ID Sign Exterior Sign Standards Elevation 01.1
Sign Type 01 - Primary Building ID Description: Graphics: To be used to identify major building and Double sided post and panel sign with Pressure sensitive, pre-spaced reflective functional destinations with public interface such removable aluminum sign panels & notched sheeting as graduate schools and athletic facilities. header. Finish: Panel Size: Painted, acrylic polyurethane semi-gloss finish 4'-0"w x 3'-6"h Materials: Typeface: .090" aluminum sign panel Adobe Garamond Semibold 3 1/4" x 2 1/2" Aluminum post Interstate Light Colors: Posts: Standard Dark Brown Panel: Duke University Dark Blue Note: Copy, graphics: Standard white see dwg. 01.5 for fabrication detail Logo: Standard White
1/2" Reveal V.I.F. 3 1/4" x 2 1/2" posts, V.I.F. 4' - 0" V.I.F.
BALDWIN A 01.6 3' - 6" AUDITORIUM
10 BALDWIN DRIVE Where Applicable Refurbish & Paint Existing posts in the Replace Existing Sign Panel field, as directed. A with new, Double Sided .090"
1' - 10" 01.7 Aluminum Sign Panel. Verify All dimensions in the field.
Elevation A Scale: 1/2" = 1' - 0" Sign Type 01 - Primary Building ID Sign Exterior Sign Standards Layouts 01.2
4'-0"
6" 6" 6" 3 1/2" 2 1/4" 1" (typ.)
1/8" Reflective white rule 6 1/2" 2 1/2" BUILDING 9 1/4"
3 1/2" NAME
4" Street Address 2" STREET ADDRESS or School Name 3"
CL sign & text 1 or 2-Line Layout – Standard Letter Size A Scale: 1" = 1' - 0"
3 1/4" BUILDING 9 1/4"
3 1/2" NAME
STREET ADDRESS
3-Line Layout – Standard Letter Size B Sign Type 01 - Primary Building ID Sign Exterior Sign Standards Layouts 01.3 6 1/2" BUILDING 8" 3" NAME
STREET ADDRESS
1 or 2-Line Layout – 12+ Characters Per Line A Scale: 1" = 1' - 0" 5" BUILDING 8" 3" NAME
STREET ADDRESS
3-Line Layout – 12+ Characters Per Line B Sign Type 01 - Primary Building ID Sign Exterior Sign Standards Layouts 01.4 6 1/2"
3 1/2" DUKE CHAPEL 9"
3 1/2" PAGE AUDITORIUM
Multiple Destination Layout A 5 1/2"
3 1/2" ATHLETICS 5 3/4" 2" CAMERON STADIUM 4" WALLACE WADE STADIUM
Campus Zone with Building Names B Scale: 1" = 1' - 0" Sign Type 01 - Primary Building ID Sign Exterior Sign Standards Panel, Post and Frame Detail 01.5
Provide cross brace to stabilize removable top section of frame
Top Section of extruded aluminum frame to be removable for replacement of sign panels
1/2" reveal
3 1/4" x 2 1/2" Extruded aluminum post with end cap
A 01.6
removable .090" aluminum sign panel both sides
Fabrication Detail A 1" = 1' - 0" Sign Type 01 - Primary Building ID Sign Exterior Sign Standards Section Detail 01.6
Extruded aluminum frame ptd Duke University Dark Blue
Extruded aluminum post ptd Standard Dark Brown .090" removable provide end cap aluminum sign panels ptd. Duke University Dark Blue 3 1/4" V.I.F.
2 1/2" V.I.F. 1/2" reveal
Section A Full Size Sign Type 01 - Primary Building ID Sign Exterior Sign Standards Details 01.7
3 1/4" x 2 1/2" sign post
B 01.7 Bury 6" below grade (footing at grade when used on sidewalk)
1/2" thk. alum. plate welded to base of post
3/4" steel "J" bolts, fasten
3' - 0" to plate as req’d.
8"
4' - 0" 1 1/2" O.C. (typ)
CL of Plate & Post 1/2" thk aluminum plate welded to base of post
3 1/4" x 2 1/2" aluminum post 8" 1 1/2" O.C. (typ) Holes for 3/4" thk "J" bolts
1' - 6" *
* NOTE: Size of footing, J bolts, post & plate to be engineered by Sign Contractor
Footing Section Post & Plate Plan View A B Scale: 3/4" = 1' - 0" Scale: 1 1/2" = 1' - 0" Sign Type 02A - Large Secondary Building ID Sign (Bronze) Exterior Sign Standards Elevation 02A.1
Sign Type 02A - Large Secondary Description: Graphics: Building ID (Bronze): Cast bronze plaque set in stone building facade cast bronze Cast Bronze sign panel mounted to building facade, to be used in tandem with or in place of Panel Size: Finish: freestanding post and panel building ID sign. 3'-2"w x 2'-4 1/2"h Raised Surfaces US 10B Bronze Satin Finish Cast Bronze to be used on buildings within Recessed Surfaces: Texture on recessed Typeface: background to be matte sand texture not a West and East Campus, as determined by the Adobe Garamond Semibold University Architect. leatherette or pebble texture. Patina to be a Colors: traditional dark bronze patina finish applied with n/a brush and heat activated, not a painted faux patina finish. Materials: 1/2" cast bronze plaque
plaque stud mounted to masonry wall as required
eq eq 2' - 3" 1' - 8" 6' - 0" VIF
Elevation A 1/2"=1' Sign Type 02A - Large Secondary Building ID Sign (Bronze) Exterior Sign Standards Layout 02A.2
2' - 3"
Raised Border with clear satin finish.
5/8" CL sign & text
Raised logo, raised surface to be
1 3/8" clear satin finish.
1 3/4" 1/8" rule (typ.) 1 5/8" 4 5/8" 2 1/4" 1' - 8" CAMERON
3 1/2" INDOOR
Recessed background with STADIUM dark bronze finish.
Layout A Scale: 1 1/2" = 1' - 0" University Architect. West andEastCampus,asdeterminedbythe Cast Bronzetobeusedonbuildingswithin freestanding postandpanelbuildingIDsign. facade, tobeusedintandemwithorplaceof Cast Bronzesignpanelmountedtobuilding Building ID(Bronze): Sign Type02B-SmallSecondary Exterior SignStandards A Scale: 1/2"=1'- 0" Elevation Type 02A:N/A Colors: Adobe GaramondSemibold Typeface: 1'-5"w x1'-1"h Panel Size: masonry buildingfacade. Cast bronzeplaquesetinstoneor Description: Elevation Sign Type02B-SmallSecondaryBuildingID(Bronze) 8" 1/2" castbronzeplaque Materials: faux patinafinish. with brushandheatactivated,notapainted traditional darkbronzepatinafinishapplied leatherette orpebbletexture.Patinatobea background tobemattesandtexturenota Recessed Surfaces:Textureonrecessed Raised SurfacesUS10BBronzeSatinFinish Finish: Cast Bronze Graphics: painted tomatch inset intoclapboardand provide awoodbackerpanel for clapboardconditions 02B.1 5' - 0" C L Sign Type 02B - Small Secondary Building ID Sign (Bronze) Exterior Sign Standards Layout 02B.2
1' - 6"
1/2" (typ.) 1/2" (typ.)
3/4" Raised logo, with dark bronze recesses. Raised surface to be 1 1/4" 1"4"3" clear satin finish.
1 5/8" Raised Adobe Garamond Semibold 1' - 1" BUILDING text with clear satin finish. NAME Raised Border with clear satin finish.
Recessed background with dark bronze finish. Layout A Scale: 1 1/2" = 1' - 0" Sign Type 02C - Large Secondary Building ID Sign (Painted) Exterior Sign Standards Elevation 02C.1
Sign Type 02D - Large Secondary Description: Graphics: Building ID (Painted): 1/4" Thick painted aluminum panel stud Masked and Sprayed Painted aluminum sign panel mounted to mounted to building facade. building facade, to be used in tandem with or Finish: in place of freestanding post and panel Panel Size: Semi-gloss Acrylic Polyurethane Finish. 3'-2"w x 2'-4 1/2"h building ID sign. Painted panel sign to be Materials: used on off-campus buildings, not to be used Typeface: 1/4" Painted Aluminum for historic buildings, as determined by the Adobe Garamond Semibold University Architect. Colors: Panel: Duke University Dark Blue Text & Border: Standard White
plaque stud mounted to masonry wall as required
eq eq 2' - 3"
THREE-LINE BUILDING 1' - 8" NAME 6' - 0" VIF
Elevation A 1/2"=1' Sign Type 02C - Large Secondary Building ID Sign (Painted) Exterior Sign Standards Layout 02C.2
2' - 3"
Raised Border with clear satin finish.
5/8" CL sign & text
Logo matte white vinyl sheeting 1 3/8"
1 3/4" 1/8" rule (typ.) 1 5/8" 4 5/8" 2 1/4" 1' - 8" THREE-LINE Adobe Garamond Semibold white masked and sprayed text
3 1/2" BUILDING NAME White masked and sprayed border Chamfered edge
Layout A Scale: 1 1/2" = 1' - 0" Exterior SignStandards University Architect. historic buildings,asdeterminedbythe on off-campusbuildings,nottobeusedfor building IDsign.Paintedpanelsigntobeused in placeoffreestandingpostandpanel building facade,tobeusedintandemwithor Painted aluminumsignpanelmountedto Building ID(Painted): Sign Type02D-SmallSecondary A Scale: 1/2"=1'-0" Elevation Text &Border:StandardWhite Panel: DukeUniversityDarkBlue Colors: Adobe GaramondSemibold Typeface: 1'-5"w x1'-1"h Panel Size: mounted tobuildingfacade. 1/4" Thickpaintedaluminumpanelstud Description: Elevation Sign Type02D-SmallSecondaryBuildingID(Painted) 8" BUILDING NAME 1/4" PaintedAluminum Materials: Semi-gloss AcrylicPolyurethaneFinish. Finish: Masked andSprayed Graphics: painted tomatch inset intoclapboardand provide awoodbackerpanel for clapboardconditions 02D.1 5' - 0" C L Sign Type 02D - Small Secondary Building ID Sign (Painted) Exterior Sign Standards Layout 02D.2
1' - 6"
1/2" (typ.) 1/2" (typ.) Chamfered edge 3/4" Logo matte white vinyl sheeting 1 1/4" 1"4"3" 1 5/8" 1' - 1" BUILDING Adobe Garamond Semibold white masked and sprayed text NAME White masked and sprayed border
Layout A Scale: 1 1/2" = 1' - 0" campus. major destinationsandprecinctswithin To beusedtoprovidedirectionsmultiple Sign Type03-DoublePostedDirectional Exterior SignStandards 2' -0" Road Edge of A Scale: 1/2"=1'- 0" Elevation Parking Symbol:StandardBlue Copy: Standardwhite Panel: DukeUniversityDarkBlue Posts: StandardDarkBrown Colors: Adobe GaramondSemibold Typeface: 3'- 4"wx5'-0"h Panel Size: aluminum signpanels¬chedheader. Double postandpanelsignwithremovable Description: Elevation Sign Type03-DoublePostedDirectional 3 1/4"x21/2"Post 3' -4"SignPanel 1/2" Reveal
1' - 10" 5' - 0" see dwg.03.503.7fordetails Note: 3 1/4"x21/2"Aluminumpost .090" removablealuminumsignpanel Materials: Painted, acrylicpolyurethanesemi-glossfinish Finish: sheeting Pressure sensitive,pre-spacedreflective Graphics: 6' - 10" 03.1 Sign Type 03 - Double Posted Directional Sign Exterior Sign Standards Layout 03.2
3' - 4" typ.
1" (typ.) 4"6"5"4 3/4" 4"6"5"4
3" Adobe Garamond Semibold Campus Center white reflective sheeting & Theaters 6 1/2"
Chapel 5' - 0" typ. 7"3"3" White reflective sheeting arrow 4 3/4" 1/8" white rule Admissions & 5" Visitor Center 7" 8" 4 3/4" 4" min.
CL sign & text 1/8" Reflective sheeting white line (typ.)
Layout 1 A Scale: 3/4" = 1' - 0" Sign Type 03 - Double Posted Directional Sign Exterior Sign Standards Layout 03.3 4"6"5"
3" Campus Center
6 1/2" Theaters
6 1/2" Chapel 7" 4"
Layout 2 A Scale: 3/4" = 1' - 0" Sign Type 03 - Double Posted Directional Sign Exterior Sign Standards Details 03.4
Top Section of extruded aluminum frame to be removable for replacement of sign panels
1/2" reveal
3 1/4" x 2 1/2" Extruded aluminum post with end cap
A 03.5
removable .090" aluminum sign panel both sides
Fabrication Detail A 1" = 1' - 0" Sign Type 03 - Double Posted Directional Sign Exterior Sign Standards Section Details 03.5
Extruded aluminum frame ptd Duke University Dark Blue
Extruded aluminum post ptd Standard Dark Brown .090" removable provide end cap aluminum sign panels ptd. Duke University Dark Blue 3 1/4" V.I.F.
2 1/2" V.I.F. 1/2" reveal
Horizontal Section A Full Size Sign Type 03 - Double Posted Directional Sign Exterior Sign Standards Details 03.6
3 1/4" x 2 1/2" sign post
B 03.6 Bury 6" below grade (footing at grade when used on sidewalk)
1/2" thk. alum. plate welded to base of post
3/4" steel "J" bolts, fasten
3' - 0" to plate as req'd
8"
4' - 0" 1 1/2" O.C. (typ)
CL of Plate & Post 1/2" thk aluminum plate welded to base of post
3 1/4" x 2 1/2" aluminum post 8" 1 1/2" O.C. (typ) Holes for 3/4" thk "J" bolts 1' - 6"*
Footing Section Post & Plate Plan View A B Scale: 3/4" = 1' - 0" Scale: 1 1/2" = 1' - 0" Sign Type 04A - Large Single Post Directional Sign Exterior Sign Standards Elevation 04A.1
Sign Type 04A - Large Single Post Description: Graphics: Directional Double faced, single post and panel sign with Pressure sensitive, pre-spaced reflective To be used to provide directional information to removable aluminum sign panels. sheeting major destinations and precincts. Panel Size: Finish: 2'-6"w x 3'-2"h painted, acrylic polyurethane semi-gloss finish background Typeface: Adobe Garamond Semibold Materials: .090" aluminum sign panel with extruded frame Colors: 3" x 3" x 1/4" square aluminum post Post: Standard Dark Brown Panel: Duke University Dark Blue Copy, arrow: Standard White Logo: Standard White
2'-7"
Duke Gardens East Campus 3'-9 1/2" Nasher Art Museum 7'-0"
Elevation A Scale: 1/2" = 1' - 0" Sign Type 04A - Large Single Post Directional Sign Exterior Sign Standards Layout 04A.2
2'-7"
3/4" (typ.) 1 1/2" CL sign & text
1/8" Reflective 2 5/8" sheeting white 2" rule (typ.) 5" 5" 2 3/4" Admissions & 2 3/4" Duke Gardens 4 3/8" Visitor Center 6 1/4" East Campus 6 1/4"
3'-8" Gardens & 4 1/2" 4 3/8" 6 1/4" Art Museum EQ 6 1/4" EQ
6 1/4" Nasher East Campus Art Museum 6 1/4" 4 1/2" 6 1/4" 4 3/8"
Layout 1 Layout 2 A B Scale: 1" = 1' - 0" Scale: 1" = 1' - 0" Sign Type 04A - Large Single Post Directional Sign Exterior Sign Standards Panel and Frame Detail 04A.3
A 04.4 1/2" x 1" Alum. flat bar welded to hanger, ptd. Duke University Dark Brown 2 1/2" 1" 1/2" reveal Drill & tap frame to hanger & post
A Internal cross bracing 04.5
3/16" x 1 3/4" flat bar welded to post ptd duke University Dark Brown
2" Extruded alum. frame ptd Duke University Dark Blue
3" x 3" x 1/4" alum.post ptd Duke University Dark Brown
End of extruded frame removeable to allow replacement of sign panel
Frame and Post Detail 1 Scale: 1-1/2" = 1' - 0" Sign Type 04A - Large Single Post Directional Sign Exterior Sign Standards Section Details 04A.4
2"
2" x 1" x 1/4" alum. tube hanger welded to post, ptd Duke University Dark Brown 1" Drill & Tap frame to hanger
1" x 1/2" alum. alum. flat bar
1/2" welded to hanger,
1/4" typ. ptd Duke University Dark Brown
Extruded aluminum frame ptd Duke University Dark Blue
.090" removeable aluminum sign panels ptd Duke University Dark Blue
Extruded aluminum frame ptd Duke University Dark Blue
Vertical Section A Full Size Sign Type 04A - Large Single Post Directional Sign Exterior Sign Standards Section Detail 04A.5
3/16" x 1 3/4" Alum. flat bar welded to post, ptd Duke University Dark Brown 3" x 3" x 1/4 aluminum post ptd Standard Dark Brown Extruded aluminum frame provide end cap ptd Duke University Dark Blue .090" removeable aluminum sign panels ptd Duke University Dark Blue
Drill & tap frame to post 3"
Removable Section of extruded frame for replacing sign panels
3" 3/16" reveal
Horizontal Section A Full Size Sign Type 04A - Large Single Post Directional Sign Exterior Sign Standards Details 04A.6
3" square sign post
B Bury 6" below grade 04A.6 (footing at grade when used on sidewalk)
1/2" thk steel plate welded to base of post
3/4" steel "J" bolts, fasten to plate as req'd 3' - 0"
* NOTE: Size of footing, J bolts, post & plate 4' - 6" to be engineered by Sign Contractor
8" 1 1/2" O.C. (typ)
1/2" thk steel plate welded to base of post 8"
1 1/2" O.C. (typ) 3" square steel post 2' - 6" * Holes for 3/4" thk "J" bolts
CL of Plate & Post
Footing Section Post & Plate Plan View A B Scale: 3/4" = 1' - 0" Scale: 1 1/2" = 1' - 0" Sign Type 04B - Small Single Post Directional Sign Exterior Sign Standards Elevation 04B.1
Sign Type 04B - Small Single Post Description: Graphics: Directional Sign: Single post and aluminum panel with Pressure sensitive, pre-spaced reflective To be used within large parking areas to reflective graphics. sheeting provide directions to visitor parking spaces and for one to two key destinations along Panel Size: Finish: campus roads. 1'-6"w x 2'-3"h Painted, acrylic polyurethane semi-gloss finish background Typeface: Adobe Garamond Semibold Materials: Adobe Garamond Regular 1/8" Thk aluminum sign panel with frame 2 1/2" Square Aluminum posts Colors: Post: Standard Dark Brown Panel: Duke University Dark Blue Symbol background: Standard Blue Copy, arrow & symbol: Standard White
Edge of Road
2' - 0" 1' - 6"
Visitor 2' - 3" Parking 4' - 0"
Elevation A Scale: 1/2" = 1' - 0" Sign Type 04B - Small Single Post Directional Sign Exterior Sign Standards Layout 04B.2
1' - 6"
1/2" typ. 2 1/2" 8" 2" 2' - 3"
2 7/16" Visitor Drop-Off 4" Parking Pick-Up 11/2" 4 1/2"
Layout 1 Layout 2 A B Scale: 1" = 1' - 0" 6 3/4" Athletic 4" 2 7/16" Facilities 4 1/2" 6 3/4"
Layout 3 C Sign Type 04B - Small Single Post Directional Sign Exterior Sign Standards Details 04B.3
2 1/2''
1/8" thk steel post cap, ptd &
1'' O.C. welded to sign post. 2 1/2" x 2 1/2" sign post 1/8" thk aluminum sign panel w/ ptd Sleeve extends 4" out of footing background & applied vinyl graphics. Grade Align top of panel w/ top of post.
2 1/2'' x 2 1/2'' x 1/8'' sign post, painted Bury 6" below grade
Back & edges of sign panel painted Bolt thru post & sleeve Fasten sign to post w/ exposed self- 3'-6'' 1'' O.C. tapping fasteners, ptd to match sign face (see specification). Galvinized steel sleeve
* NOTE: Size of footing, 1' - 0" to be engineered by Sign Contractor
Section - Post Mounted Footing Detail A B Scale: 3" = 1' - 0" Scale: 3/4" = 1' - 0"
All Surfaces of Panel to be painted Duke University Dark Blue
Post to be painted Standard Dark Brown
Fasteners to be sized appropriately for panel. Oversized fasteners will be rejected. Fasteners to be painted to match adjacent surface of panel.
Finishing Detail C Not To Scale Sign Type 05 - Street Name Sign Exterior Sign Standards Elevation 05.1
Sign Type 05 - Street Name Sign: Description: single post with two double faced Colors: To be used to identify on-campus street names. aluminum sign panels, and reflective graphics post: Standard Dark Brown panel: Duke University Dark Blue Overall Size: 3' - 7"w x 11 1/4"h copy: Standard White Panel Size: 3' - 2"w x 10"h Graphics: Typeface: Adobe Garamond Semibold pressure sensitive, prespaced reflective sheeting Finish: painted, acrylic polyurethane semi-gloss finish background Materials: 1/2" thk aluminum backer plate and 1/8" thick sign panels 3" x 3" x 1/4" Aluminum Post Edge of Road
3' - 7" Overall 2' - 0"
TOWERVIEW 11 1/4" DRIVE Overall 10' - 6"
Elevation Perspective A B Scale: 1/2" = 1' - 0" Scale: 1/2" = 1' - 0" Sign Type 05 - Street Name Sign Exterior Sign Standards Layouts 05.2
3' - 2"
Adobe Garamond Semibold open letter spacing reflective sheeting, Standard White 1/2" EQ 3"
10" TOWERVIEW 1 1/2"
1 7/8" DRIVE EQ
1/8" Reflective sheeting border all around, Standard White 1/2" Layout 1 - Standard Layout A
Scale: 1 1/2" = 1' - 0"
3' - 6"
2 3/4" FRANK BASSETT DRIVE
Layout 2 B
Scale: 1 1/2" = 1' - 0" Sign Type 05 - Street Name Sign Exterior Sign Standards Details 05.3
B B 05.4 05.4
2" 3" 3' - 2" 3" 1" Header Band
A 05.4 1/4" reveal TOWERVIEW 1/4" 11
DRIVE 10" Sign Panel 1 1/4"
Lower Panel Upper Panel (Normal to Upper Panel)
Sign Post
Panel Mounting Detail A Scale: 1 1/2" = 1' - 0"
90º
Sign Panels
Plan View B Scale: 1 1/2" = 1' - 0" Exterior SignStandards Fastener, withallenhead, Counter SunkThreaded 2 perpanelmin. A Scale: HalfSize Horizontal Section EQ Section Details Sign Type05-StreetName EQ
EQ EQ
1/4" reveal
B 1" Header 10" Sign Panel Backer PlatetoPassThroughSignPost painted DarkBlue 1/2" thk.AluminumBackerPlate Painted DarkBlue. 1/8" thk.AluminumSignPanel Sign Post.CornerstobeSquare 1/2" x11Slotpunchedthrough painted StandardDarkBrown 3" x1/4"AluminumSignPost Cross PanelBelow Band Double SidedVHB Adhesive Scale: HalfSize Vertical SectionDetail
11 1/4" Backer Plate Standard DarkBrown Header BandPainted Reveal and Dark Blue Backer PlatePainted Sign Panelsand 05.4 Sign Type 05 - Street Name Sign Exterior Sign Standards Details 05.5
3" square sign post
B 05.5 Bury 6" below grade (footing at grade when used on sidewalk)
1/2" thk Alum. anchor plate welded to base of post
3/4" steel S.S. "J" bolts, fasten
3' - 0" to plate as req'd 4' - 6"
* NOTE: Size of footing, J bolts, post & plate to be engineered by Sign Contractor
8" 1 1/2" O.C. (typ)
CL of Plate & Post 2' - 6" * 1/2" thk Alum. plate welded to base of post
3" square Alum. post 8" 1 1/2" O.C. (typ) Holes for 3/4" thk S.S. "J" bolts Footing Section A Scale: 3/4" = 1' - 0"
Post & Plate Plan View B Scale: 1 1/2" = 1' - 0" Sign Type 06 - Parking ID, Visitor Lots Exterior Sign Standards Elevation 06.1
Sign Type 06 - Parking ID, Visitor Lots Description: Graphics: To be used to provide directions to and identify Double faced, single post and panel sign with Pressure sensitive, prespaced reflective the entrances to visitor parking lots and parking removable aluminum sign panels. sheeting information locations. Panel Size: Finish: 2'-7"w x 3'-3"h Painted, acrylic polyurethane semi-gloss finish background Typeface: Adobe Garamond Semibold Materials: Interstate Regular .090" aluminum sign panel extruded aluminum frame Colors: 3" x 3" x 1/4" square aluminum post Post: Standard Dark Brown Panel: Duke University Dark Blue Copy, arrow, symbols: Standard White Symbol background: Standard Blue Edge of Road
2' - 0" 2' - 7"
A 06.4
CAMPUS A 06.5 CENTER GARAGE 3' - 3" Sign Panel VISITOR PARKING 7' - 0"
A 06.6
Elevation A Scale: 1/2" = 1' - 0" Sign Type 06 - Parking ID, Visitor Lots Exterior Sign Standards Layout 06.2
2' - 7"
Standard blue reflective sheeting 2"9" symbol bckgrnd. typ.
Standard white reflective sheeting symbol, typ. 5 1/2" 2 1/2" CAMERON Adobe Garamond Semibold standard
3' - 3" white reflective sheeting, typ. 4 1/4" BOULEVARD 1/8" standard white reflective 4 1/4"2"4"3 1/2" 4 1/4"2"4"3 GARAGE sheeting border 1/8" rule standard white reflective
2" VISITOR Interstate Regular PARKING white reflective sheeting, typ.
3/4" typ. CL Sign, text and Graphics
Layout 1 A Scale: 1" = 1' - 0" 2 1/2" 9" 6" 2 1/2" SCIENCE DR.
4 1/2" LOT 2"4 1/2" 2"4
2" VISITOR
3 3/4" PARKING
Layout 2 B Scale: 1" = 1' - 0" Sign Type 06 - Parking ID, Visitor Lots Exterior Sign Standards Panel & Frame Detail 06.3
1" x 2" Alum. tube hanger welded to post, ptd Duke University Dark Brown
A 06.4 1/2" x 1" Alum. flat bar welded to hanger, ptd. Duke University Dark Brown 2 1/2" 1" 1/2" reveal Drill & tap frame to hanger & post
A Internal cross bracing 06.5
3/16" x 1 3/4" flat bar welded to post ptd duke University Dark Brown
2" Extruded alum. frame ptd Duke University Dark Blue
3" x 3" x 1/4" alum.post ptd Duke University Dark Brown
End of extruded frame removable to allow replacement of sign panel
Frame and Post Detail 1 Scale: 1-1/2" = 1' - 0" Sign Type 06 - Parking ID, Visitor Lots Exterior Sign Standards Section Detail 06.4
2"
2" x 1" x 1/4" alum. tube hanger welded to post, ptd Duke University Dark Brown 1" Drill & Tap frame to hanger
1" x 1/2" alum. alum. flat bar
1/2" welded to hanger,
1/4" typ. ptd Duke University Dark Brown
Extruded aluminum frame ptd Duke University Dark Blue
.090" removable aluminum sign panels ptd Duke University Dark Blue
Extruded aluminum frame ptd Duke University Dark Blue
Vertical Section A Full Size Sign Type 06 - Parking ID, Visitor Lots Exterior Sign Standards Section Detail 06.5
3/16" x 1 3/4" Alum. flat bar welded to post, ptd Duke University Dark Brown 3" x 3" x 1/4 aluminum post ptd Standard Dark Brown Extruded aluminum frame provide end cap ptd Duke University Dark Blue .090" removable aluminum sign panels ptd Duke University Dark Blue
Drill & tap frame to post 3"
Removable Section of extruded frame for replacing sign panels
3" 3/16" reveal
Horizontal Section A Full Size Sign Type 06 - Parking ID, Visitor Lots Exterior Sign Standards Details 06.6
3" square sign post
B Bury 6" below grade 06.6 (footing at grade when used on sidewalk)
1/2" thk steel plate welded to base of post
3/4" steel "J" bolts, fasten to plate as req'd 3' - 0"
* NOTE: Size of footing, J bolts, post & plate 4' - 6" to be engineered by Sign Contractor
8" 1 1/2" O.C. (typ)
1/2" thk steel plate welded to base of post 8"
1 1/2" O.C. (typ) 3" square steel post 2' - 6" * Holes for 3/4" thk "J" bolts
CL of Plate & Post
Footing Section Post & Plate Plan View A B Scale: 3/4" = 1' - 0" Scale: 1 1/2" = 1' - 0" Sign Type 07 - Parking ID, Reserved Lots Exterior Sign Standards Elevation 07.1
Sign Type 07 - Parking ID, Reserved Lots: Description: Graphics: To be used to identify entrances to reserved Single post and aluminum panel Pressure sensitive, pre-spaced reflective parking areas. with reflective graphics sheeting Symbol: Silk Screened Panel Size: 1'-6"w x 2'-3"h Finish: Painted, acrylic polyurethane semi-gloss finish Typeface: background Adobe Garamond Semibold Interstate Light Materials: 1/8" thk aluminum sign panel with frame Colors: 2 1/2" Square aluminum posts Post: Standard Dark Brown Panel: Duke University Dark Blue Symbol background, Copy and Arrow: Standard White Circle Border: Standard Red Symbol: Standard Black
Edge of Road
2' - 0" 1' - 6"
RESERVED 2' - 3" PARKING LAW SCHOOL LOT 4' - 0"
Elevation A Scale: 1/2" = 1' - 0" Sign Type 07 - Parking ID, Reserved Lots Exterior Sign Standards Layouts 07.2
1' - 6"
3/4" typ. 3/4" typ. 2 1/2" 8 1/2" 1 3/4" 2' - 3" 2" typ RESERVED RESERVED PARKING PARKING 1 1/8" 2 1/4" LAW SCHOOL BIOLOGICAL LOT SCIENCES LOT 1 1/2" 1 1/8"
Layout 1 Layout 2 A B Scale: 1" = 1' - 0" Scale: 1" = 1' - 0"
See layout 1 for typical dimensions Sign Type 07 - Parking ID, Reserved Lots Exterior Sign Standards Details 07.3
2 1/2''
1/8" thk steel post cap, ptd &
1'' O.C. welded to sign post. 2 1/2" x 2 1/2" sign post 1/8" thk aluminum sign panel w/ ptd Sleeve extends 4" out of footing background & applied vinyl graphics. Grade Align top of panel w/ top of post.
2 1/2'' x 2 1/2'' x 1/8'' sign post, painted Bury 6" below grade
Back & edges of sign panel painted Bolt thru post & sleeve Fasten sign to post w/ exposed self- 3'-6'' 1'' O.C. tapping fasteners, ptd to match sign face (see specification). Galvinized steel sleeve
* NOTE: Size of footing, 1' - 0" to be engineered by Sign Contractor
Section - Post Mounted Footing Detail A B Scale: 3" = 1' - 0" Scale: 3/4" = 1' - 0"
All Surfaces of Panel to be painted Duke University Dark Blue
Post to be painted Standard Dark Brown
Fasteners to be sized appropriately for panel. Oversized fasteners will be rejected. Fasteners to be painted to match adjacent surface of panel.
Finishing Detail C Not To Scale Sign Type 08 - Bus Stop & Bike Route Sign Exterior Sign Standards Elevation 08.1
Sign Type 08 - Bus Stop & Bike Route Sign: Description: Graphics: To be used to identify bus stops and bike Single post and aluminum panel with reflective Pressure sensitive, pre-spaced reflective routes, with route information graphics sheeting Panel Size: Finish: 1'-6"w x 2'-3"h Painted, acrylic polyurethane semi-gloss finish background Typeface: Adobe Garamond Semibold Materials: Interstate Light 1/8" thk aluminum sign panel with frame 2 1/2" square aluminum posts Colors: Post: Standard Dark Brown Panel: Duke University Dark Blue Symbol background: Standard Blue Copy, arrow & symbol: Standard White
Edge of Road
2' - 0" 1' - 6"
DUKE TRANSIT 2' - 3" SYSTEM D3, D4, D11 4' - 0"
Elevation A Scale: 1/2" = 1' - 0" Sign Type 08 - Bus Stop & Bike Route Sign Exterior Sign Standards Layouts 08.2
1' - 6"
1/2" typ. 2 1/2" 8" 2" 2' - 3" DUKE 1 3/4" Adobe Garamond Semibold 3 3/8" TRANSIT SYSTEM
4 1/2" Interstate Light 1 3/4" D3, D4, D11
Layout 1 A Scale: 1" = 1' - 0" 2"
Adobe Garamond Semibold
2 7/16" Bike 4" Route 11/2" 4 1/2"
4" arrow typ
Layout 2 B Scale: 1" = 1' - 0"
See Layout 1 this pg. for typical dimensions Sign Type 08 - Bus Stop & Bike Route Sign Exterior Sign Standards Details 08.3
2 1/2''
1/8" thk steel post cap, ptd &
1'' O.C. welded to sign post. 2 1/2" x 2 1/2" sign post 1/8" thk aluminum sign panel w/ ptd Sleeve extends 4" out of footing background & applied vinyl graphics. Grade Align top of panel w/ top of post.
2 1/2'' x 2 1/2'' x 1/8'' sign post, painted Bury 6" below grade
Back & edges of sign panel painted Bolt thru post & sleeve Fasten sign to post w/ exposed self- 3'-6'' 1'' O.C. tapping fasteners, ptd to match sign face (see specification). Galvinized steel sleeve
* NOTE: Size of footing, 1' - 0" to be engineered by Sign Contractor
Section - Post Mounted Footing Detail A B Scale: 3" = 1' - 0" Scale: 3/4" = 1' - 0"
All Surfaces of Panel to be painted Duke University Dark Blue
Post to be painted Standard Dark Brown
Fasteners to be sized appropriately for panel. Oversized fasteners will be rejected. Fasteners to be painted to match adjacent surface of panel.
Finishing Detail C Not To Scale Sign Type 09 - Parking Rate Sign Exterior Sign Standards Elevation 09.1
Sign Type 09 - Parking Rate Sign Description: Graphics: To be used to identify parking fees and Double side post and panel sign with Pressure sensitive, prespaced reflective policies at visitor parking lots. removeable aluminum panels & reflective sheeting graphics Finish: Panel Size: Painted, acrylic polyurethane semi-gloss finish 2'-6"w x 4'-6 1/2"h background Typeface: Materials: Adobe Garamond Semibold .090" aluminum sign panel with frame Adobe Garamond Regular 3 1/4" x 2 1/2" extruded aluminum posts Interstate Light Colors: Post: Standard Dark Brown Panel: Duke University Dark Blue Symbol, copy & arrow: Standard White Symbol background: Standard Blue
2 1/2" typ. 1/2" reveal typ.
2' - 6"
VISITOR PARKING
A 09.4 Please Pay
4' - 6 1/2" At Pay Station
1/2" reveal After Parking 6' - 9"
25¢/10 min. 2 hr. max.=$3
A 09.5
Elevation A Scale: 1/2" = 1' - 0" Sign Type 09 - Parking Rate Sign Exterior Sign Standards Layouts 09.2
Adobe Garamond Semibold standard white reflective sheeting 2' - 6"
1" typ.
1/8" standard white reflective sheeting VISITOR PARKING line, typ.
Standard blue reflective sheeting symbol background, typ. Standard white reflective sheeting symbol, typ. Please Pay
3' - 6" Adobe Please Pay Garamond Semibold At standard white At reflective sheeting Pay Station Pay Station After Parking After Parking
25¢/10 min. 25¢/10 min.
1' - 0" 2 hr. max.=$3 2 hr. max.=$3
Layout 1 Layout 2 A B Scale: 1" = 1' - 0" Scale: 1" = 1' - 0" Sign Type 09 - Parking Rate Sign Exterior Sign Standards Details 09.3
Top Section of extruded aluminum frame to be removable for replacement of sign panels
1/2" reveal, typ
3 1/4" x 2 1/2" Extruded aluminum post with end cap, typ
A 09.4
removeable .090" aluminum sign panel both sides
1/2" spacer A 09.4
Top Section of extruded aluminum frame to be removable for replacement of sign panels
Fabrication Detail A 1" = 1' - 0" Sign Type 09 - Parking Rate Sign Exterior Sign Standards Section 09.4
Extruded aluminum frame ptd Duke University Dark Blue
Extruded aluminum post ptd Standard Dark Brown .090" removable provide end cap aluminum sign panels ptd. Duke University Dark Blue 3 1/4" V.I.F.
2 1/2" V.I.F. 1/2" reveal
Section A Full Size Sign Type 09 - Parking Rate Sign Exterior Sign Standards Details 09.5
3 1/4" x 2 1/2" sign post
B 09.5 Bury 6" below grade (footing at grade when used on sidewalk)
1/2" thk. alum. plate welded to base of post
3/4" steel "J" bolts, fasten
3' - 0" to plate as req’d.
8"
4' - 0" 1 1/2" O.C. (typ)
CL of Plate & Post 1/2" thk aluminum plate welded to base of post
3 1/4" x 2 1/2" aluminum post 8" 1 1/2" O.C. (typ) Holes for 3/4" thk "J" bolts
1' - 6" *
* NOTE: Size of footing, J bolts, post & plate to be engineered by Sign Contractor
Footing Section Post & Plate Plan View A B Scale: 3/4" = 1' - 0" Scale: 1 1/2" = 1' - 0" Sign Type 10A - Large Pedestrian Route Sign Exterior Sign Standards Elevation 10A.1
Sign Type 10A - Large Pedestrian Description: Graphics: Route Sign: Double post and double sided removable Pressure sensitive, pre-spaced reflective To be used to provide directions along aluminum panels with reflective graphics sheeting pedestrian routes to major destinations and precincts when four or more destinations are Panel Size: Finish: required. 1'- 0"w x 2'- 10"h Painted, acrylic polyurethane semi-gloss finish background Typeface: Adobe Garamond Semibold Materials: 1/8" thk aluminum sign panel with frame Colors: 2" square aluminum posts Post: Standard Dark Brown Panel: Duke University Dark Blue Symbol background: Standard Blue Copy, arrow & symbol: Standard White
Edge of Walking Path
1' - 0" 1' - 6"
Bryan Center Duke Chapel Page Auditorium Plaza 2' - 10" 1' - 6"
Elevation A Scale: 1/2" = 1' - 0" Sign Type 10A - Large Pedestrian Route Sign Exterior Sign Standards Layouts 10A.2
1' - 2"
3/8" all around 2" 3"
1 1/8" Native Plant 2 3/16"
1 7/8" Garden 2 3/4" 1 1/8" Bryan Center 2 5/8" Rose Garden 2 3/4" Duke Chapel 2 5/8" Historic Gardens Page Auditorium 1" 1 3/8"
Plaza 2" 1" 2'-10" 1" 1" 2" 1" Discovery Garden White Garden Doris Duke Center
Layout 1 Layout 2 A B Scale: 1 1/2" = 1' - 0" Scale: 1 1/2" = 1' - 0" Sign Type 10A - Large Pedestrian Route Sign Exterior Sign Standards Section 10A.3
3/16" x 1 3/4" Alum. flat bar welded to post, ptd Duke University Dark Brown Extruded aluminum frame ptd Duke University Dark Blue 2" x 2" x 1/8 aluminum post .090" removable ptd Standard Dark Brown aluminum sign panels provide end cap ptd Duke University Dark Blue
Drill & tap frame to post 2"
Removable Section of extruded frame for replacing sign panels 2" 3/16" reveal
Horizontal Section A Full Size 2" x 2" Sleeve extends sign post 4" out of footing Grade
Bury 6" below grade
Bolt thru post & sleeve 3'-6''
Galvinized steel sleeve
* NOTE: Size of footing, 1' - 0" to be engineered by Sign Contractor
Footing Detail B Scale: 3/4" = 1' - 0" Sign Type 10B - Small Pedestrian Route Sign Exterior Sign Standards Elevation 10B.1
Sign Type 10B - Small Pedestrian Description: Graphics: Route Sign: Single post and aluminum panel with reflective Pressure sensitive, pre-spaced reflective To be used to provide directions along graphics sheeting pedestrian routes to major destinations and precincts for up to three messages. Provide the Panel Size: Finish: Duke logo in areas where branding is desired. 1'- 0"w x 1'- 4"h Painted, acrylic polyurethane semi-gloss finish background This may include paths that are along the Typeface: perimeter of campus or leading from remote Adobe Garamond Semibold Materials: parking areas. 1/8" thk aluminum sign panel with frame Colors: 2"square aluminum posts Post: Standard Dark Brown Panel: Duke University Dark Blue Symbol background: Standard Blue Copy, arrow & symbol: Standard White
Edge of Walking Path
1' - 0" 1' - 0"
Admissions Info-sessions
and Tours 1' - 4" 3' - 0"
Elevation A Scale: 1/2" = 1' - 0" Sign Type 10B - Small Pedestrian Route Sign Exterior Sign Standards Layouts 10B.2
1' - 0"
3/8" all around 1 3/8" 1 1/8" 1" 2 1/2" 1 1/8" Admissions
1 7/8" Info-sessions 1' - 4" 1 7/8"
1" and Tours 2"
Layout 1 A Scale: 1 1/2" = 1' - 0" 3" 1 1/8" Page
1 7/8" Auditorium
2 7/8" Chapel West Union
Layout 2 B Scale: 1 1/2" = 1' - 0" Sign Type 10B - Small Pedestrian Route Sign Exterior Sign Standards Details 10B.3
2''
1/8" thk steel post cap, ptd &
1'' O.C. welded to sign post. 2" x 2" sign post 1/8" thk aluminum sign panel w/ ptd Sleeve extends 4" out of footing background & applied vinyl graphics. Grade Align top of panel w/ top of post.
2'' x 2'' x 1/8'' sign post, painted Bury 6" below grade
Back & edges of sign panel painted Bolt thru post & sleeve Fasten sign to post w/ exposed self- 3'-6'' 1'' O.C. tapping fasteners, ptd to match sign face (see specification). Galvinized steel sleeve
* NOTE: Size of footing, 1' - 0" to be engineered by Sign Contractor
Section - Post Mounted Footing Detail A B Scale: 3" = 1' - 0" Scale: 3/4" = 1' - 0"
All Surfaces of Panel to be painted Duke University Dark Blue
Post to be painted Standard Dark Brown
Fasteners to be sized appropriately for panel. Oversized fasteners will be rejected. Fasteners to be painted to match adjacent surface of panel.
Finishing Detail C Not To Scale Sign Type 11A - Large Regulatory Sign Exterior Sign Standards Elevation 11A.1
Sign Type 11A - Large Regulatory Sign: Description: Graphics: To be used to provide rules and regulations Double post and aluminum panel with masked Masked and sprayed for campus areas/facilities. and sprayed graphics Finish: Panel Size: Painted, acrylic polyurethane semi-gloss 2'-0"w x 3'-3"h finish background Typeface: Materials: 1/8" thk aluminum sign panel & frame Varies 2 1/2" square aluminum posts Colors: Post: Standard Dark Brown Panel: Duke University Dark Blue Graphics: White, unless noted otherwise
Edge of Walking Path
2 1/2" 2 1/2" 1' - 0" 1/2"2' - 0" 1/2"
A
11A.4 3' - 3"
A 2' - 6" 11A.5
Elevation A Scale: 1/2" = 1' - 0" Sign Type 11A - Large Regulatory Sign Exterior Sign Standards Layouts 11A.2
2' - 0"
Welcome to SARAH P. DUKE GARDENS We are delighted you have chosen to visit this public botanic garden which is open daily from dusk to dawn.
PLEASE NOTE THE FOLLOWING ARE PROHIBITED: Stepping in plant beds or picking flowers Climbing trees or structures Smoking Sports equipment, balls, balloons or kites Bicycles, skates, skateboards, etc. Swimming or wading Cooking or fires 3'-3" Alcoholic beverages
IN ADDITION, PLEASE OBSERVE THE FOLLOWING POLICIES: Dogs must be leashed (6’ max) and kept out of plantings Owners must clean up after their dogs Please carry out what you carry in Do not feed the wildlife Groups of 15 or more please register in advance Professional and wedding photography by permit only
For more information about the gardens’ history, programs, plants & people, or to become a member of the friends of duke gardens, please visit: gardens.duke.edu Thank you
Layout 1 A digital artwork to be Scale: 1 1/2" = 1' - 0" provided by Designer Sign Type 11A - Large Regulatory Sign Exterior Sign Standards Layouts 11A.3
2' - 0"
ATHLETIC FIELD COMPLEX
The Facility Monitor is responsible for the supervision of all athletic facilities and grounds. The Monitor is also responsible for opening, closing, and securing all facilities. They are to provide service and assistance to all users. At any point the Facility Monitor may regulate or prohibit activities which are deemed unsafe.
ALL FIELD USERS ARE REQUIRED TO ABIDE THE RULES OF THIS POLICY AS WELL ALL UNIVERSITY ORDINANCES. FIELD RULES INCLUDE, BUT ARE NOT LIMITED TO THE FOLLOWING:
• Those participating in facility activities assume all • Alcoholic beverages, tobacco products, fireworks, glass inherent risks and responsibilities, whether spectator or containers, gum, and sunflower seeds are strictly prohibited. participant. • Permitted field users are responsible for the • Open Recreation is only available during unscheduled sportsmanship of their players, coaches, officials, and times on the artificial turf fields. All users must have a spectators. All users are subject to removal from the valid Duke University ID. Scheduled Varsity practices, facility as determined by the Facility Monitors or Intramurals, Sport Clubs, and Events take precedence. Duke University staff.
3'-3" • Athletic Field Open Recreation: • At the conclusion of the event, users must collect all litter Monday – Friday: 6:00 PM – 11:00 PM and garbage from the grounds and adjacent areas. Please Saturday: 8:00 AM – 11:00 PM dispose of those items in the appropriate containers. Sunday: 8:00 AM – 11:00 PM • Each field user is responsible for moving nets, goals, • To schedule Athletic and Recreation spaces please benches, etc. completely off the playing surface at the contact the Athletic or Recreation offices for approval. end of their reservation. All users must have a valid Duke University ID.
• All pets (including dogs) are prohibited in athletic Please refrain from or limit the use of heavy traffic on wear spaces. (Exception: Service animals are allowed to areas, regardless of weather, to assist in providing the best assist those with disabilities). field conditions possible. Fields may be closed at the discretion of the Grounds, Athletic, and Recreation staff during times when the fields remain unplayable. Users will be notified in advance whenever possible.
Duke University asks all users to seek shelter when severe weather is within 6 miles of the athletic space. If at any time you feel unsafe please evacuate the space. MAP Thank you
Lorem ipsum dolor set amit.
Layout 2 A Scale: 3" = 1' - 0" digital artwork to be provided by Designer Sign Type 11A - Large Regulatory Sign Exterior Sign Standards Section 11A.4
Extruded aluminum frame ptd Duke University Dark Blue
Extruded aluminum post ptd Standard Dark Brown .090" removable provide end cap aluminum sign panels ptd. Duke University Dark Blue 3 1/4" V.I.F.
2 1/2" V.I.F. 1/2" reveal
Section A Full Size Sign Type 11A - Large Regulatory Sign Exterior Sign Standards Details 11A.5
3 1/4" x 2 1/2" sign post
B 11A.5 Bury 6" below grade (footing at grade when used on sidewalk)
1/2" thk. alum. plate welded to base of post
3/4" steel "J" bolts, fasten
3' - 0" to plate as req’d.
8"
4' - 0" 1 1/2" O.C. (typ)
CL of Plate & Post 1/2" thk aluminum plate welded to base of post
3 1/4" x 2 1/2" aluminum post 8" 1 1/2" O.C. (typ) Holes for 3/4" thk "J" bolts
1' - 6" *
* NOTE: Size of footing, J bolts, post & plate to be engineered by Sign Contractor
Footing Section Post & Plate Plan View A B Scale: 3/4" = 1' - 0" Scale: 1 1/2" = 1' - 0" Sign Type 11B - Small Regulatory Sign Exterior Sign Standards Elevation 11B.1
Sign Type 11B - Small Regulatory Sign: Description: Graphics: To be used to provide information about Single post and aluminum panel with Pressure sensitive, pre-spaced reflective visitor parking areas, and parking restrictions reflective graphics sheeting Panel Size: Finish: 10"w x 1'-4"h Painted, acrylic polyurethane semi-gloss finish background Typeface: Adobe Garamond Semibold Materials: 1/8" thk aluminum sign panel with frame Colors: 2" square aluminum posts Post: Standard Dark Brown Panel: Duke University Dark Blue Square symbol background: Standard Blue Circle symbol background: Standard White Copy, arrow & symbol in square: Standard White Symbol in circle: Standard Black Circle border: Standard Red
Edge of Curb
2' - 0" 10"
RESERVED PARKING ONLY 1' - 4" 3' - 0"
Top of Curb
Elevation A Scale: 1/2" = 1' - 0" Sign Type 11B - Small Regulatory Sign Exterior Sign Standards Layouts 11B.2
10"
3/8" typ. 3/8" typ.
1/16" standard white
1 3/8" reflective sheeting line, typ. standard blue reflective 4 1/2" sheeting symbol background, typ. standard white reflective 1 1/8" sheeting symbol, typ.
1 1/4” RESERVED RESERVED 5/8"
1' - 4" Adobe Garamond semibold PARKING standard white reflective PARKING ONLY sheeting, typ. ONLY
EQ" Adobe Garamond semibold standard 2 1/4" white reflective sheeting EQ"
2" standard white reflective sheeting arrow typ. VAN
ACCESSIBLE 4 3/4" 7/8" 5/8" 1 3/16" typ Layout 1 Layout 2 A B Scale: 1 1/2" = 1' - 0" Scale: 1 1/2" = 1' - 0"
VISITOR VISITOR PARKING PARKING ONLY ONLY
3/4" typ
CL Layout 3 Layout 4 C D Scale: 1 1/2" = 1' - 0" Scale: 1 1/2" = 1' - 0"
For typical dimensions For typical dimensions see Layout 1 see Layout 1 Sign Type 11B - Small Regulatory Sign Exterior Sign Standards Layouts 11B.3
Standard white reflective sheeting circle, typ. 1 1/4" Standard Red reflective sheeting circle border, typ.
4 7/8" Standard black applied matte vinyl symbol, typ.
7/8" RESERVED PARKING NO ONLY PARK ING
See Layout 1 for typical dimensions See Layout 5 this pg for typical dimensions
Layout 5 Layout 6 A B Scale: 1 1/2" = 1' - 0" Scale: 1 1/2" = 1' - 0" Sign Type 11B - Small Regulatory Sign Exterior Sign Standards Details 11B.4
2''
1/8" thk steel post cap, ptd & welded to sign post.
1'' O.C. 2" x 2" sign post 1/8" thk aluminum sign panel w/ ptd Sleeve extends 4" out of footing background & applied vinyl graphics. Grade Align top of panel w/ top of post.
2'' x 2'' x 1/8'' sign post, painted Bury 6" below grade
Back & edges of sign panel painted Bolt thru post & sleeve Fasten sign to post w/ exposed self- 3'-6'' 1'' O.C. tapping fasteners, ptd to match sign face (see specification). Galvinized steel sleeve
* NOTE: Size of footing, 1' - 0" to be engineered by Sign Contractor
Section - Post Mounted Footing Detail A B Scale: 3" = 1' - 0" Scale: 3/4" = 1' - 0"
All Surfaces of Panel to be painted Duke University Dark Blue
Post to be painted Standard Dark Brown
Fasteners to be sized appropriately for panel. Oversized fasteners will be rejected. Fasteners to be painted to match adjacent surface of panel.
Finishing Detail C Not To Scale Sign Type 12 - Accessible Building Entrance Sign Exterior Sign Standards Elevation 12.1
Sign Type 12 - Accessible Building Entrance Description: Graphics: Sign: Single post and aluminum panel with reflective Pressure sensitive, prespaced reflective To be used to provide directions to wheelchair graphics sheeting accessible building entrances Panel Size: Finish: 8"w x 12"h Painted, acrylic polyurethane semi-gloss finish background Typeface: Adobe Garamond Semibold Materials: Adobe Garamond Regular 1/8" thk aluminum sign panel with frame 2"square aluminum posts Colors: Post: Standard Dark Brown Panel: Duke University Dark Blue Symbol background: Standard Blue Copy, arrow & symbol: Standard White
EQ. EQ.
8'' BRYAN CENTER
BRYAN
12'' CENTER 3'-0'' Mounting Height Determined in the Field
Typical Elevation 1 Typical Elevation 2 A B Scale: 1/2" = 1' - 0" Scale: 1/2" = 1' - 0" Sign Type 12 - Accessible Building Entrance Sign Exterior Sign Standards Layouts 12.2
8"
CL CL 1" 1 3/8" 4" 4" 1" 12" 2" BRYAN 3/4" 5/8"
CENTER 3/4"eq 1 3/4" 1 3/4" eq
Layout 1 Layout 2 A B Scale: 3" = 1' - 0" Scale: 3" = 1' - 0"
CL 1" L C 4" L C 13/16" SCHOOL OF 5/85/8 ENGINEERING 5/16
HUDSON 5/85/8 HALL 5/16 1/2" 1/2" 1 1/8
Layout 3 B Scale: 3" = 1' - 0" Sign Type 12 - Accessible Building Entrance Sign Exterior Sign Standards Details 12.3
2''
1/8" thk steel post cap, ptd & welded to sign post.
1'' O.C. 2" x 2" sign post 1/8" thk aluminum sign panel w/ ptd Sleeve extends 4" out of footing background & applied vinyl graphics. Grade Align top of panel w/ top of post.
2'' x 2'' x 1/8'' sign post, painted Bury 6" below grade
Back & edges of sign panel painted Bolt thru post & sleeve Fasten sign to post w/ exposed self- 3'-6'' 1'' O.C. tapping fasteners, ptd to match sign face (see specification). Galvinized steel sleeve
* NOTE: Size of footing, 1' - 0" to be engineered by Sign Contractor
Section - Post Mounted Footing Detail A B Scale: 3" = 1' - 0" Scale: 3/4" = 1' - 0"
All Surfaces of Panel to be painted Duke University Dark Blue
Post to be painted Standard Dark Brown
Fasteners to be sized appropriately for panel. Oversized fasteners will be rejected. Fasteners to be painted to match adjacent surface of panel.
Finishing Detail C Not To Scale Sign Type 13 - Campus Map Display Kiosk Exterior Sign Standards Elevation 13.1
Sign Type 13 - Campus Map Display Kiosk: Description: Graphics: To be used to display the Duke University Double sided post and panel sign with Exterior grade digital print on matte Control Campus Map and posters. removable aluminum sign panels & knotched Tac vinyl header. Finish: Panel Size: Painted, acrylic polyurethane semi-gloss 3'-5"w x 5'-0"h finish Typeface: Materials: Adobe Garamond Semibold .080" aluminum sign panel Interstate Light 3 1/4" x 2 1/2" Aluminum post Colors: Posts: Standard Dark Brown Panel: Duke University Dark Blue Copy, graphics: Standard white Note: Logo: Standard White see dwg. 13.4 for fabrication detail
3'- 11" overall 3 1/4" Plan View B Scale: 1/2" = 1' - 0"
1/2" 1/2" reveal reveal 3 1/4" 3'- 5" 2 1/2" 2 1/2" 6' - 10" 5' - 0" 1' - 10"
Map DisplaySide View Poster Dispay Elevations A Scale: 1/2" = 1' - 0" Sign Type 13 - Campus Map Display Kiosk Exterior Sign Standards Layout 13.2
41" Print
6" 6"
2 1/2"1" 2 1/2" 1" 2 1/2" 1" 6"
N
ATHLETICS – WEST CAMPUS
CHA PEL
BRYAN CENTER 47" 60" Print
11 6 8 3 1 4 16 13 15 12 9 5 1 Ambler Tennis Stadium 17 14 2 Athletic Field Complex 7 3 Cameron Indoor Stadium 4 Card Gym 5 Intramural Building 6 Jack Coombs Baseball Stadium 7 Koskinen Stadium 8 Krzyzewski Center 9 Murray Building 2 10 Pascal Field House 11 Schwartz-Butters Athletic Center 12 Sheffield Tennis Center 13 Taischoff Aquatic Center 14 Wallace Wade Football Stadium 9 15 Wilson Recreation Center 16 Yoh Football Center 2 1/2"1"
Typical Map Layout A Scale: 1 1/2" = 1' - 0" Sign Type 13 - Campus Map Display Kiosk Exterior Sign Standards Layout 13.3
41" Print
6" 6"
2 1/2"1" 2 1/2" 1" 2 1/2" 1" 6" 47" 60" Print 2 1/2"1"
Typical Poster Layout A Scale: 1 1/2" = 1' - 0" Sign Type 13 - Campus Map Display Kiosk Exterior Sign Standards Detail 13.4
Provide cross brace to stabalize removable top section of frame
Top Section of extruded aluminum frame to be removable for replacement of sign panels
1/2" reveal
3 1/4" x 2 1/2" Extruded aluminum post with end cap
A 13.5
removeable .080" aluminum sign panel with exterior grade digital print on Matte Control Tac vinyl applied to face
Fabrication Detail A 1" = 1' - 0" Sign Type 13 - Campus Map Display Kiosk Exterior Sign Standards Section Detail 13.5
Extruded aluminum frame ptd Duke University Dark Blue
Extruded aluminum post removeable .080" ptd Standard Dark Brown aluminum sign panel with exterior provide end cap grade digital print on Matte Control Tac vinyl applied to face 3 1/4" V.I.F.
2 1/2" V.I.F. 1/2" reveal
Section A Full Size Sign Type 13 - Campus Map Display Kiosk Exterior Sign Standards Details 13.6
3 1/4" x 2 1/2" sign post
B 13.6 Bury 6" below grade (footing at grade when used on sidewalk)
1/2" thk alumin. plate welded to base of post
3/4" steel "J" bolts, fasten
3' - 0" to plate as req'd
8"
4' - 0" 1 1/2" O.C. (typ)
CL of Plate & Post 1/2" thk aluminum plate welded to base of post
3 1/4" x 2 1/2" aluminum post 8" 1 1/2" O.C. (typ) Holes for 3/4" thk "J" bolts
1' - 6" *
* NOTE: Size of footing, J bolts, post & plate to be engineered by Sign Contractor
Footing Section Post & Plate Plan View A B Scale: 3/4" = 1' - 0" Scale: 1 1/2" = 1' - 0" Sign Type 14 - Traffic Sign Exterior Sign Standards Elevation 14.1
Sign Type 14 - Traffic Sign: Description: Graphics: To be used to control and regulate the Single post and aluminum panel with reflective Pressure sensitive, prespaced reflective movement of vehicular traffic on campus graphics, designed in accordance with the sheeting roadways, in accordance with the Manual of Manual of Uniform Traffic Control Devices Uniform Traffic Control Devices (MUTCD). (MUTCD). Finish: Painted, acrylic polyurethane semi-gloss finish Panel Size: background 24"w x 24"h (minimum), 30"w x 30"h (standard) Materials: 1/8" thk aluminum sign panel with frame Typeface: 3" square aluminum post MUTCD Standard Alphabet Colors: Post: Standard Dark Brown Back face of panel and edges: Standard Dark Brown Edge of Road
2' - 0" 30" 30" 7' - 0"
Elevation A Scale: 1/2" = 1' - 0" Sign Type 14 - Traffic Sign Exterior Sign Standards Layouts 14.2
30" Standard 30" Standard 24" Minimum 24" Minimum 24" Minimum 30" Standard
Stop Sign Yield Sign AB Scale: 1" = 1' - 0" Scale: 1" = 1' - 0"
24" Standard 30" Standard
Speed Limit Sign C Scale: 1" = 1' - 0" Sign Type 14 - Traffic Sign Exterior Sign Standards Details 14.3
3''
1/8" thk steel post cap, ptd & welded to sign post.
1'' O.C. 3" x 3" sign post 1/8" thk aluminum sign panel w/ ptd Sleeve extends 4" out of footing background & applied vinyl graphics. Grade Align top of panel w/ top of post.
3'' x 3'' x 1/8'' sign post, painted Bury 6" below grade
Back & edges of sign panel painted Bolt thru post & Fasten sign to post w/ exposed self- sleeve 1'' O.C. tapping fasteners, ptd to match sign face (see specification). Galvinized steel sleeve 3'-6''
* NOTE: Size of footing, to be engineered by Sign Contractor
Section - Post Mounted A 18" Scale: 3" = 1' - 0"
Footing Detail B Scale: 3/4" = 1' - 0" All Surfaces of Panel to be painted Duke University Dark Blue
Post to be painted Standard Dark Brown
Fasteners to be sized appropriately for panel. Oversized fasteners will be rejected. Fasteners to be painted to match adjacent surface of panel.
Finishing Detail C Not To Scale Sign Type 15 - Traffic Circle Sign Exterior Sign Standards Elevation 15.1
Sign Type 15 - Traffic Circle Sign: Description: Graphics: To be used to control and regulate the Single post and aluminum panel with painted Pressure sensitive, prespaced reflective movement of vehicular traffic around traffic finish and reflective graphics . sheeting circle rotaries. Panel Size: Finish: Varies Painted, acrylic polyurethane semi-gloss finish Typeface: Materials: N/A 1/8" thk aluminum sign panel with frame 3" x 3" x 1/4, and 2" x 2" x 1/8" square aluminum Colors: post (See Typical Elevations) Post: Standard Dark Brown Panel (All Surfaces): Duke University Dark Blue
Edge of Road
2' - 0" 24" 32" TRAFFIC CIRCLE AHEAD
3" Square Alum. Post 7' - 0"
Typical Elevation 1 A Scale: 1/2" = 1' - 0" Sign Type 15 - Traffic Circle Sign Exterior Sign Standards Elevation 15.2
Center Sign on Traffic Island
18" 24"
30" 2" square Alum. Post
Typical Elevation 2 A Scale: 1/2" = 1' - 0"
Top of Traffic Circle Wall. (Set sign 1' - 0" back from edge of wall)
24" 10"6"
2" square Alum. Post
Typical Elevation 3 B Scale: 1/2" = 1' - 0" Sign Type 15 - Traffic Circle Sign Exterior Sign Standards Layouts 15.3
24"
CL Sign
3/4"
1/8" Reflective sheeting arrows
8 1/2" 5" R
3 5/8" 1 1/4" 32" Duke University Dark Blue background typ. TRAFFIC White reflective sheeting text CIRCLE Garamond Semibold 1 3/4"
2 1/4" AHEAD 1/8" Reflective sheeting white line, typ. 3 1/4"
Layout 1 A Scale: 1" = 1' - 0"
18" 24" 3" 1/2" 3 1/2" 17" 3 1/2" 1/2" 4 1/4" eq 10" 2 1/2"
5 3/4" eq 6 1/2" R 24" 4 1/4" 5 1/2"
3 1/2" 2 1/2" 5 1/2" Layout 2 Layout 3 BC Scale: 1" = 1' - 0" Scale: 1" = 1' - 0" Sign Type 15 - Traffic Circle Sign Exterior Sign Standards Details 15.4
3''
1/8" thk steel post cap, ptd & welded to sign post.
1'' O.C. 3" x 3" sign post 1/8" thk aluminum sign panel w/ ptd Sleeve extends 4" out of footing background & applied vinyl graphics. Grade Align top of panel w/ top of post.
3'' x 3'' x 1/8'' sign post, painted Bury 6" below grade
Back & edges of sign panel painted Bolt thru post & Fasten sign to post w/ exposed self- sleeve 1'' O.C. tapping fasteners, ptd to match sign face (see specification). Galvinized steel sleeve 3'-6''
* NOTE: Size of footing, to be engineered by Sign Contractor
Section - Post Mounted A 18" Scale: 3" = 1' - 0"
Footing Detail B Scale: 3/4" = 1' - 0" All Surfaces of Panel to be painted Duke University Dark Blue
Post to be painted Standard Dark Brown
Fasteners to be sized appropriately for panel. Oversized fasteners will be rejected. Fasteners to be painted to match adjacent surface of panel.
Finishing Detail C Not To Scale Sign Type 16 - Vinyl Graphics Exterior Sign Standards Elevation 16.1
Sign Type 16 - Vinyl Graphics: Description: Graphics: To be used to provide information on entrance Prespaced cut vinyl letters and standard Pressure sensitive prespaced vinyl film doors and glass surfaces. symbols. Finish: Typeface: White vinyl to be matte finish Adobe Garamond Semibold Adobe Garamond Regular Materials: Pressure sensitive prespaced vinyl film Colors: Symbol & Letters: Standard White Symbol Background: Standard Blue
CL of double door or edge of single door
6" 3' - 6"
Elevation 1 (Accessible Building Entrances) A Scale: 1/2" = 1' - 0" Sign Type 16 - Vinyl Graphics Exterior Sign Standards Symbols 16.2
5"
1/8" typ. eq Matte White vinyl backer
Symbol and Border 5" knocked out of blue background 3 1/2"
Standard Blue vinyl
eq Background
5" Symbol A Scale: 3" = 1' - 0"
6" eq 6" 4 1/2" eq
6" Symbol B Scale: 3" = 1' - 0" Sign Type 17 - Pavement Markings Exterior Sign Standards Layout 17.1
Sign Type 17 - Pavement Markings: Description: To be used to indicate parking spaces which Non-reflective pavement marking paint are reserved or wheelchair accessible Typeface: Interstate Bold
Colors: Standard White
BG0002 8" 6" RESERVED 8" 5 - 0" min. aisle align align CL parking space EQ3' - 6" EQ 8' - 0" min. for vans & text
Plan A Scale: 3/16" = 1' - 0" Exterior Sign Standards
B. TEMPORARY SIGNS
The following guidelines establish a consistent and clutter-free campus environment while allowing operations to continue as effectively and efficiently as possible.
All new orders for signs must comply with the guidelines and policies described and illustrated on the sign type drawings that follow:
Sign Type 30— Temporary A-Frame Sign Sign Type 31—Temporary Yard Sign Sign Type 32—Construction Project Sign Sign Type 33—Work In Progress Sign
For temporary signs proposed for an extended period of time to mitigate rerouting of pedestrian paths due to construction, FMD must be provided with a plan showing proposed locations of signs, sign messages, and sample graphics for review and approval, prior to installation of signs.
Any non-compliant signs found on campus will be removed by Facilities Management Department (z). Periodic deviations from the standards are to be expected on occasion and may be approved beforehand for short-term use by FMD.
Certain days or periods of time — such as Commencement, BOT weekends, etc.— may be dedicated as “non clutter times” when all but those signs deemed essential will be allowed. A calendar and detailed procedures will be created for regular times and all other dates and times. Sign Type 30 - Temporary A-Frame Sign Exterior Sign Standards Elevation 30.1
Sign Type 30 - Temporary A-Frame Sign Description: Graphics: To be used for promotion and wayfinding Signicade® Deluxe double sided A-Frame sign Direct exterior-grade digital print on 1/8 in thk. for special events and commercial or structure with exterior grade digital print sign PVC panel or other rigid substrate (3/16 in. thk. dining venues. panels. Sign panel on one or both sides as max.). needed. Signage Policy: Panel Size: • Traffic control signs for special events 2'-0"w x 3'-0"h may be put up immediately prior to the event and must be removed at completion. Typeface: • Signs may not be placed on lawns or Adobe Garamond Type Family shrub areas. Interstate Type Family • Signs may not restrict access to sidewalks, Use of any other proprietary fonts must be building entrances or handicapped ramps. approved by Campus Landscape Architect. • Signs promoting events (including parking reservation signs) may not be displayed Colors: longer than one week. A-Frame Structure: Black • Only one sign is permitted for each Panel: Duke University Dark Blue (Pantone commercial or dining venue. 2767C) • Signs may only be secured to sign posts, Copy, graphics: White not to trees or light poles. Duke Logo: White • Dark blue vinyl coated chains are required for Other Logos: White or Full Color securing the sign. White background with dark blue letters are • Signs must be maintained by sponsoring group. permitted for traffic control messages for special events only.
Structure: Signicade® Deluxe double-sided A-Frame sign
Sign Panel: 24" x 36", direct high resolution exterior grade digital print on 1/8 in. thk. acrylic panel or other rigid substrate (3/16 in. thk. max.)
Rendering A Not to scale Sign Type 30 - Temporary A-Frame Sign Exterior Sign Standards Layouts 30.2
2' - 0" 1 3/4" 2 1/4" 1 5/8"
5" Text and Graphics: White 2 3/4" SBSI Adobe Garamond or Interstate fonts acceptable. (Garamond Semibold shown) 4 3/8" Conference 3'-0" 4 3/8" Parking Background:
2 1/2" Duke University Dark Blue (Pantone 2767C) 3 1/2"
Note: Dark Blue text on white background is permitted for traffic control signage if required: they may be put up immediately prior to the event and must be removed Sample Wayfinding Layout at completion. A Scale: 1" = 1' - 0"
@ the perk Text and Graphics: White Fonts other than Garamond or Interstate, yum on the run. such as proprietary fonts as shown, must be approved by Campus Landscape Architect
Background: Duke University Dark Blue (Pantone 2767C) ESPRESSO BAR SANDWICHES SALADS SNACKS Vendor or Event Logo: White or Full color Size must not exceed one quarter of saledelia.com total area of sign panel.
Sample Commercial Sign B Scale: 1" = 1' - 0" Sign Type 31 - Temporary Yard Sign Exterior Sign Standards Elevation 31.1
Sign Type 31 - Temporary Yard Sign Description: Graphics: To be used for promotion and wayfinding for Standard metal sign frame with exterior grade Exterior-grade digital print on 4mm Coroplast ® special events and commercial or dining digital print on corrugated plastic sign panel. corrugated plastic. venues. Message on one or both sides as needed. Signage Policy: Panel Size: • No yard signs are allowed on West Campus 2'-0"w x 1'-6"h Quad or East Campus Quad. • Each user group promoting events or actions Typeface: (i.e. Parking and Transportation Services, Adobe Garamond Type Family Office of Student Affairs, including all student Interstate Type Family groups, Duke Camps, etc…) are permitted Use of any other proprietary fonts must be only 10 yard signs at any one time approved by Campus Landscape Architect. across campus. • Signs may not advertise events for longer Colors: than one week prior to event and must be Panel: Duke University Dark Blue (Pantone removed immediately following the event. 2767C) • Each user group promoting commercial Copy, graphics: White ventures (i.e. Duke Stores and Duke Dining) Boarder Line: White are permitted only 10 signs at any one time Duke Logo: White across campus (10 per group and not 10 Other Logos: White or Full Color per venue). • Signs on lawns will be removed when the lawn is mowed regardless of how long it has been there. • The organization or persons sponsoring the activity on the sign must be identified. • If the sponsor is not identified on the sign, you must receive approval the from Facilities Management Department within 24 hours SBSI of installation. Conference Sign Panel: 18" x 24" High resolution exterior grade digital print on 4mm Coroplast ® corrugated plastic or PVC panel
The Hillman Group® 18" x 24" Metal Sign Frame or equal, Black
Elevation A Scale: 1 1/2" = 1' - 0" Sign Type 31 - Temporary Yard Sign Exterior Sign Standards Elevation 31.2
2' - 0"
3" Text and Graphics: White Adobe Garamond or Interstate fonts acceptable (as shown). 2 1/2" SBSI 4"
1' - 6" Conference 2 1/4" Background: Duke University Dark Blue (Pantone 2767C) 3 1/2"
Sample Wayfinding Layout A Scale: 1 1/2" = 1' - 0"
UNIVERSITY STORE
Duke Apparel & Gift Items and books, computers, school supplies and groceries NOW OPEN SUNDAY: 11AM-4PM
Sample Commercial Layout B Scale: 1 1/2" = 1' - 0" Sign Type 32 - Construction Project Sign Exterior Sign Standards Elevation 32.1
Sign Type 32 - Construction Project Sign Description: Graphics: To be used for providing information on Double sided post and panel sign with removable Graphic: Exterior-grade high resolution direct to major campus construction projects. Sign(s) sign panels and concrete footing. substrate digital print on Dibond panel. to be placed at perimeter of construction site. Panel Size: (electronic artwork file to be provided 5'-4"w x 4'-0"h by FMD) Typeface: Signage Policy: Adobe Garamond Semibold • All construction projects lasting longer than Adobe Garamond Regular three months must have a construction information sign. Colors: • FMD project managers are responsible for Posts: Dark Brown ordering signs; if there is no project manager, Frame & Panel: Duke University Dark Blue approval must be obtained through campus Text: Standard White landscape architect. Finish: • Signs and posts are to be stored at FMD at Painted, acrylic polyurethane semi-gloss the completion of projects.
3 1/4" x 2 1/2" Post
1/2" Reveal
5' - 4" Sign Panel
PROJECT TITLE
PROJECT SUMMARY
Basic Description of the project.
PROJECT TIMELINE
Construction timeline.
PROJECT TEAM
ARCHITECT
LANDSCAPE ARCHITECT
ENGINEER
CONTRACTOR
4' - 0" Sign Panel OTHERS AS NEEDED 7' - 0"
PROJECT MANAGEMENT
Contact information.
Other related information.
Elevation A Scale: 1/2" = 1' - 0" Sign Type 32 - Construction Project Sign Exterior Sign Standards Layout 32.2
5' - 4"
Project Title: 1 3/4 in. cap height, Adobe Garamond Semibold PROJECT TITLE Headers: 3/4 in. cap height, Adobe Garamond Semibold PROJECT SUMMARY Body Copy: 1/2 in. cap height, Basic Description of the project. Adobe Garamond Regular
PROJECT TIMELINE
Construction timeline.
Background: Duke University Dark Blue PROJECT TEAM 4' - 0" ARCHITECT
LANDSCAPE ARCHITECT
ENGINEER
CONTRACTOR
OTHERS AS NEEDED
PROJECT MANAGEMENT
Contact information.
Other related information.
Graphic: High resolution exterior grade direct to substrate digital print on .090” Dibond (electronic artwork file to be provided by FMD)
Layout A Scale: 1" = 1' - 0" Sign Type 32 - Construction Project Sign Exterior Sign Standards Frame, Post and Panel Detail 32.3
Top Section of extruded aluminum frame to be removable for replacement of sign panels
1/2" reveal
3 1/4" x 2 1/2" Extruded aluminum post with end cap
A 32.4
Removable .090" Dibond sign panel both sides
Fabrication Detail A 1" = 1' - 0" Sign Type 32 - Construction Project Sign Exterior Sign Standards Section Detail 32.4
Extruded aluminum frame ptd Duke University Dark Blue
Extruded aluminum post ptd Standard Dark Brown .090" removable provide end cap Dibond sign panels ptd Duke University Dark Blue 3 1/4" V.I.F.
2 1/2" V.I.F. 1/2" reveal
Section A Full Size Sign Type 32 - Construction Project Sign Exterior Sign Standards Details 32.5
3 1/4" x 2 1/2" sign post
B 32.5 Bury 6" below grade (footing at grade when used on sidewalk)
1/2" thk alumin. plate welded to base of post
3/4" steel "J" bolts, fasten
3' - 0" to plate as req'd
8"
4' - 0" 1 1/2" O.C. (typ)
CL of Plate & Post 1/2" thk aluminum plate welded to base of post
3 1/4" x 2 1/2" aluminum post 8" 1 1/2" O.C. (typ) Holes for 3/4" thk "J" bolts 1' - 6"*
Footing Section Post & Plate Plan View A B Scale: 3/4" = 1' - 0" Scale: 1 1/2" = 1' - 0" Sign Type 33 - Work in Progress Sign Exterior Sign Standards Elevation 33.1
Sign Type 33 - Work in Progress Sign Description: Finish: To be used to identify short term repair Single sided Dibond sign panel mounted to Matte UV inhibit or laminate. projects, such as utility, landscape, and galvanized steel square sign post. others that are visible on campus. Sign(s) to Graphics: be placed at perimeter of work site. Panel Size: Exterior grade high resolution direct to 2'-0"w x 1'-6"h (maximum) substrate digital print. Typeface: Signage Policy: Adobe Garamond Semibold • Short-term repair projects, such as utility, Interstate Light sidewalk, landscape, and others in visible locations must display sign. Colors: • FMD will provide the digital artwork; Post: Dark Brown • Any disturbance to landscape is to be Panel: Duke University Dark Blue repaired as needed with oversight by Grounds. Text: Standard White • Signs and posts are to be removed at end of project and stored at FMD.
2' - 0" (max. size) 1' - 6" (max. size)
3' - 0" Direct to substrate digital print on 1/8" Dibond panel. (electronic artwork file to be provided by FMD)
2x2 in. galv. steel sign post painted Dark Brown
Elevation/Layout A Scale: 1 1/2" = 1' - 0" Sign Type 33 - Work in Progress Sign Exterior Sign Standards Section 33.2
2'' 1'' O.C. 1/8" thk Dibond sign panel. Align top of panel w/ top of post.
2'' x 2'' galv. steel sign post, painted Dark Brown
Back of sign panel painted or printed Duke Dark Blue 3' - 0" 1'' O.C.
Grade 2' - 0" (or as required to ensure stability)
Section - Post Mounted A Scale: 3" = 1' - 0"