AcuteB2 600 AirS User´s Guide

2 AcuteB2 600 AirS www..com Enjoy Enjoy your Profoto product! create your own light with only a few different reflectors. the unique Profoto focusing system offers you the possibility to Every single and accessory creates its special light and unlimited possibilities for creating and adjusting their own Shaping light.Light Toolsof range extensive photographers offers Our light-shaping. and lighting in expertise Profoto’s value to come have world the around photographers Professional Profoto equipment has been used. Some photographers can tell just from seeing a picture, if Milan, New York, Tokyo to Cape Town. rental studios and rental houses worldwide, from Paris, and London,safety. For this reason our equipment is individual each product widely comply with that used specified performance, check in quality We program. an testing pass strict and them extensive have we shipped are products our Before photographers. demanding most the for tools better yet even offer can we have sought the perfect we light. decades What pushes us four is our conviction than that more For generator. AcuteB2 an in investing by confidence your us showing for Thanks Thank youforchoosingProfoto www.profoto.com

3 AcuteB2 600 AirS 4 AcuteB2 600 AirS www.profoto.com Safety instructions be exposed to excessive heat such as sunshine, fire or the like. disconnect device shall remain readily operable. Batteries (battery pack or batteries installed) shall not modeling lamporflashtube! couplerisusedasdisconnectdevice.The mainsplugorappliance The shaft in its reflector hole. Disconnect lamp head cable between generator time after being and turned off. Do not lamp touch modeling lamp or flash tube head when mounting umbrella metal when changing Equipment operates with high voltage. Generator capacitors are electrically charged for a considerable connection! Only use Profoto extension cables! Do not open or disassemble or generator lamp head! Mains powered generator shall always be connected to a mains socket outlet with a protective WARNING –ElectricalShockHighVoltage!earthing with the flash symbol are hazardous live. modified or repaired by authorized and competent service personnel! Warning - The terminals marked a lamp into the holder ensure not to touch the bulb with bare hands. Equipment must only be serviced, or deep scratches. Lamps shall be changed if they are damaged or thermally deformed. When placing become visibly damaged to such an extent that their effectiveness is impaired, for example by cracks has it if changed be shall covers grids.Glass protective or covers glass protective supplied without in the unit. Do not connect this equipment to flash equipment from other brands. Do equipment not to use hasty flash temperature changes heads in humid conditions as this could lead to condensation water Do not place any objects filled with liquids, such as vases, on or near the equipment . fields or Do in not areas with expose flammable the gases or dust! Do not expose the equipment to dripping or splashing. use. Do not place or use the equipment where it can be exposed to moisture, extreme electromagnetic for professional use! Generator, lamp heads and accessories are only intended for indoor photographic sure that Profoto Safety Instructions is always accompanied Do the not equipment!operate Profotothe equipmentproducts before are studying intended the instruction Safety Prec manual and the accompanying safety. Make electronic equipment on the European market, when product life has ended! local legal requirements for separate disposal of waste, for instance WEEE directive for electrical and Equipment may be returned to Profoto distributors free of charge environment.the to harmful be for could that components electronic and electrical contains Equipment recycling according to WEEE. Follow Final Disposal with other users. Interference can not be ruled out. device is operated according to local regulations. The frequency spectrum this device is using is are shared followed, especially those concerning operating temperature and be supplytaken whenvoltage the range. device Makeis integrated sure in the systems. Make sureThis equipment that makes all use of specifications the within radio spectrum this and document emits radio frequency energy. Proper care Note aboutRF! should lamp or flash tube! materials, etc. over inlets and outlets of the equipment ventilation or directly over glass cover,Remove transport modeling cap from lamp head before use! Do not obstruct ventilation NO by placing filters, diffusing corresponds with technical data of user guide regarding power supply! on rare occasions explode and throw out hot particles! Make sure that rated voltage for modeling lamp strong heat when used! Do not point modeling lamps or flash emit parts tubes metal certain too and closetubes flash lamps, Modeling to fingers! persons.bare with parts hot All touch not lamps Do may Caution –BurnHazardHotParts! TICE –EquipmentOverheatingRisk autions! System description. Table ofContents Nomenclature Functionality Operating instructions. Operating Maintenance Accessories Technical data Pocket Wizard. Profoto Air. . Flash duration temperature Reliability testing–theR-test. Safety functions. . Flash beforeready Audible andvisiblesignals. Channel andZoneselection–Pocket Wizard. Channel selection–Profoto Air. . Radio operation Sync signaling. Modeling light. Recycling time. control. Energy . Indicator Battery . Battery Turn. offgenerator Sync viaradio–Pocket Wizard. Sync viaradio–Profoto Air. Sync viaPhotocell Sync viacable. Settings. Turn. ongenerator Lamp headconnection. Changing battery fuse Changing battery Battery charging. Battery replacement. Battery ...... www.profoto.com 13 12 11 10 10 10 13 13 12 12 11 11 10 14 15 15 14 14 14 14 14 14 17 16 16 16 18 19 7 7 7 8 9 9 9

5 AcuteB2 600 AirS 6 AcuteB2 600 AirS EU Declaration of Conformity. –Profoto information Air. Regulatory www.profoto.com Unites States andCanada. Unites States F.C.C. Canada. andIndustry Japan Regulatory information –Pocket information Regulatory Wizard. World-wide ofRadioSpectrum. Usage . Unites States frequencies. Operating ...... 21 21 22 23 23 24 25 25 25 refer to the Pocket Wizard manual. For detailed information about the Pocket Wizard Transmitters and Transceivers, please on the corresponding frequency. radio receiver compatible with all Pocket Wizard Transmitters and Transceivers working The AcuteB2 600 AirS 344 MHz LiFe and AcuteB2 600 AirS 433 MHz LiFe have a built-in time, please check your local regulations for the legal version. operating on either 344 MHz (USA) or 433 MHz (Europe). As rules and Wireless laws flash synchronization change is also all possible with the the Pocket Wizard system, which is Pocket Wizard to the User’s Guide for the Profoto Air Remote and Profoto Air practically Sync. an infinite number of AcuteB2 generators. For The Profoto Air Remote and detailedProfoto Air Sync devices allow wireless synchronization of information, please refer integrated in all AcuteB2 generators. is control) remote (not synchronization wireless for functionality radio Profoto Air The on the 2.4 GHz radio frequency band. The Profoto Air system can generators. be The used Profoto world-wide. Air system is operating on one of eight selectable radio Profoto channels Air is a system for convenient wireless synchronization Profoto and Air remote control of flash time, we recommend using the AcuteB2 versions with LiFe battery. with a Lead Acid (Pb) battery. For best performance, lower weight and (433MHz) LiFelonger are battery equipped with life- a LiFePO4 (LiFe) battery and the AirS AcuteB2 600 AcuteB2 600 AirS and Pb LiFe (344MHz) AirS LiFe,AcuteB2 600 AirS AcuteB2 600 The • • • • The AcuteB2 product family includes the following flash generators: the fast recycling time means that you never have to wait for the images flash. will be exactly as you want them. Short needs flash for creative duration freedom. gives The 2/10 images f-stop control a gives you crisp the confidence feel that all and the wherever you go. The seven f-stop range gives all powered flash generator offers all thethe functionality you need to bring power high-quality light the demanding photographer The AcuteB2 generator is compact in size and weighs only a few kilos. Still, this battery System description AcuteB2 600 AirS (433MHz) LiFe AcuteB2 600 AirS (344MHz) LiFe AcuteB2 600 AirS LiFe AcuteB2 600 AirS Pb www.profoto.com

7 AcuteB2 600 AirS 8 AcuteB2 600 AirS 16 9. 8. 7. 6. 5. 4. 3. 2. 1. Nomenclature www.profoto.com 15 14 18 17 1

On/Off Switch Ready Lamp and Test Button Photocell Switch Photocell Sync Socket Pocket Wizard Antenna (optional) Modeling Light Power Socket Charge Socket Lamp Head Socket 18. 17. 16. 15. 14. 13. 12. 11. 10.

Profoto Air Antenna Sound Switch Energy Switch Energy Control Channel Indicator Channel Button Radio On/Off Button Modeling Light Switch Battery Indicator 13 12 11 10 9 8 7 6 5 4 3 2 drops, when there is battery capacity for just a few more flashes. Battery Indicator [10] for a generator with LiFe battery will remain Indicator on [10] max for a until generator it with suddenly Pb battery will slowly go from max to an min, updated whereas battery the indication. Because of different discharge characteristics, the Battery is triggered. At start up, all three lamps will light up and a flash should The be Battery triggered to Indicator get [10] indicates the battery level. The Battery indicator is updated when a flash and LiFe batteries, see section Defective batteries shall be returned to the dealer for recycling. For details about the Pb temperatures, we recommend to use the LiFe battery at lower temperatures. below freezing 0 °C (+32 ºF). Since the LiFe is battery more capable of handling lower The capacity of the Pb battery decreases dramatically when the battery temperature falls be fully recharged prior to storage. level, but should not be charged for longer time than necessary. Both battery types shall before the battery is fully discharged. The LiFe battery can be charged from any charge For a long battery Life, the Pb battery shall be charged as often as possible and preferably charging times, see section using a standard Profoto Charger. The charger is available in two versions, with different Both battery types can be charged separately or with the battery in place in the generator, The generator cannot be used without a battery in place. AirS LiFe are equipped with a LiFe battery and the AcuteB2 600 AirS Pb AcuteB2 600 with AirS a LiFe,Pb battery.the AcuteB2 600 344MHz AirS LiFe and the AcuteB2 600 433Mz The AcuteB2 generator is available in two versions; battery LiFe or Lead Acid (Pb). The generators to update their packs with the new LiFe batteries. battery Profoto previous of owners allows and generators battery old and new of use apply the same chargers for LiFe and Pb (lead acid) be batteries; used this insimplifies a the combinedwider temperature range. Because ofand theiroverheating. special On constructiontop they it have is a possible much to longer reliable. life-time The integrated than electronics also lead protect acidthe LiFe batteries battery against anddeep-discharge can LiFe cells offer a very high capacity, are lightweight, stand high loads andadjusts their are output very to safeassure an and optimal performance. sophisticated electronics: include A special batteries constructed BMS board (Battery These Monitoring System) batteries.controls and LiFe – short (LiFePO4), Phosphate Iron Ion Lithium batteries: rechargeable reliable and advanced most the uses Profoto LiF Battery Functionality e Batteries Indicator Technical .data The generator can be used during charging. Technical . data www.profoto.com

9 AcuteB2 600 AirS 10 AcuteB2 600 AirS www.profoto.com • • • photocell or via radio. The AcuteB2 generator can be synchronized with the in different ways; Sync via signaling cable, • • • The Modeling Light Switch [11] is used to select one of three modeling light alternatives: from the battery for the modeling light. modeling light. When the of Profoto usage unlimited Adapter for generator 85 the to W connected be is can W 85 connected, Adapter Profoto The no power will be discharged lamp is equivalent to a 90 W standard halogen lamp. maximum modeling light is 65 W, which with the high efficient level.65 The energy selected W the Halostar with vary not does and constant is light modeling The Modeling light by the battery type, see section required, the energy level shall be set as low The as flash possible.recycling Thetime recyclingdepends on time the is energy also Recyclinglevel affected time setting. When a short recycling time is discharge the generator when the energy level is lowered. to functionality,flash dump a auto trigger has to need generator no the is Since there energy is made with the Energy Control [15] in 2/10 f-stop increments. 1/1 down to 1/16 of the total energy (equivalent to five f-stops). Fine adjustment of the The energy can partly be adjusted with the Energy Switch [16] in 2 f-stop increments, The fromenergy output is regulated over seven f-stops. Energy control device. the generators can be synchronized via a Profoto Air Remote or Profoto Air The Sync Profoto Air radio system is integrated in all AcuteB2 generators, meaning that transmitters. The Photocell Switch [7] is used to enable/disable the Photocell [6]. The Photocell [6] will sense a flash release as well as signals from most IR sync meter sync cord can be extended with sync extension cords. The Sync Socket [5] allows the camera or a flash meter to be connected. The 5 OFF: In this position, the modeling light is turned off. BAT: In this position, the modeling lamp is powered from the battery. Modeling Light Power Socket [3]. EXT: This position shall be used when the Profoto Adapter 85 W is connected to the Technical . data TM halogen

be unpredictable due to the channel learning process. with radio should not be performed during the 30 detected, second the radio receiver learn will use the period,previously used channel. since Actual photo the shooting result may If a trigger signal is detected, the radio receiver will lock to that channel. If no trigger is channels.32 the of any on signal trigger a detect to try will it on power from seconds The Pocket Wizard radio receiver has a learning function, which means during that 30 Channel and Zone selection – Pocket Wizard Indicator [14] corresponding to the selected radio channel (1-8) is illuminated. Channel selection on the generator is made with the Channel Button [13]. The Channel band. devices and other radio equipment operating on the same widely used that 2.4 is not GHz interfered frequency by other photographers using Profoto Air, or by WLAN functionality.and Bluetooth The large number of radio channels makes it possible to select a channel The frequencies are evenly spread over the entire frequency band, to optimize reliable Channel selection is used to select one of eight specific frequencies in the 2.4 GHz Channel band. selection – Profoto Air • • • • For best radio operation (Profoto Air and Pocket Wizard), do the following: system. on. When the Pocket Wizard system is used, it is recommended to turn off the The PocketProfoto Wizard Air radio receiver is always in operation while the generator is powered The Profoto Air radio receiver is turned on/off with the Radio On/Off Button Radio [12]. operation sync times before taking pictures! Always check the manuals of the camera and synchro device about the shortest possible • antenna. For Pocket Wizard: keep the transmitter’s antenna parallel with the generator water filled objects as this affects radio range. When hiding the generator from view, try to not hide it behind or against metal or Wizard) and the generator whenever possible. Maintain line of sight between the transmitter (Profoto Air Sync/Remote or Pocket Antenna [4], Profoto Air Antenna [18]). Keep power, sync and lamp head cords away from the antenna (Pocket Wizard Wizard device. generators have an integrated radio receiver for synchronization via the Pocket The AcuteB2 600 AirS 344MHz LiFe and the AcuteB2 600 AirS 433MHz LiFe www.profoto.com 11 AcuteB2 600 AirS 12 AcuteB2 600 AirS www.profoto.com circuit damage. battery discharge. The 40 A fuse mounted on the battery cassette protects it from short generator automatically shuts down if the battery level is too low, to protect it from deep temperature has decreased sufficiently, the generator will start recycling as normal. The If the generator overheats, the recycling will slow down or stop. After a while, when the Safety functions be usable if the catch of the moment was perfect. of the frame may be so small that it makes Naturally no the flash significant light differencemay not and correspond fully the to frame.frame the exposed incorrectly set may an indicating value.“beep”,long still a be The will ready,there 100% incorrect is dumping of the generator is fully completed. When a The flash “Flash is before ready” released function makes before it possible the to flash generator before the recycling or auto Flash before ready completed, the Ready Lamp [8] will be turned on again. flash and the Ready Lamp [8] will be turned off. When the recycling e of the generator is the functionality is as expected. When the Test Button [8] is pressed, the generator will Test functionThe Test Button [8] is used to test that all light settings are correct and that overexposed frame. The audible sounds can be turned off with the Sound been Switch lowered) is [17]. completed, there will be a long “beep”, indicating an underexposed or sound. If a flash is triggered before recycling or auto dumping (when the When the recycling energy of the generator is completed,level there will be a short audible has “beep” will be turned off, indicating that dumping or charging of the energy is to in flash. progress. When the energy output is changed, the Ready Lamp [8] and the modeling The lamp Ready Lamp [8] is illuminated when the generator is fully charged (100%) and Audible ready and visible signals Transmitter. It will trigger if zones A and D are selected. channel 17 with zones to Transmitterset any A, from trigger B,will it or combination this C taught selected.is generator It the If will not trigger if only zone D is selected on the Example: The teaching Transmitter is set to channel 17 with zones A, B, and C selected. (ABCD), without leaving the camera position. of convenience activating the or with deactivating the photographer flash the unit(s) provides wirelessly in This 32. four through separately controllable 17 zones channels, The Pocket Wizard radio receiver can also learn multiple zones on the Quad-Triggering the Energy Control [15] set to MAX. The shortest flash duration (1/6800s) is achieved with the Energy Switch [16] set to -4 Consult and the camera manual for information about the shortest flash sync time. example to cut out exposure influence from indoor ambient light The as full well power as shortdirect sunlight.flash duration has more advantages Flash than duration freezing a moving object, for are available for further adjustments. changed nominally ±300 K. Flash to Flash color precision, ±50 °K. Optional glass is temperature changed nominally covers -150 K. Color in temperature between MAX to -4 is color the -2, to MAX from [15] Control Energy the turning photography.By digital for suited perfectly is AcuteB2 the reliable, and constant is temperature color the Since Color temperature R-test prior to shipping. temperature and are not malfunctioning in any operating normal a way.kept have parts all that verify All to examined is equipment Profoto test,the products are subject to the standards required for professional equipment by professional photographers. After the high The meet Profoto the R-test all very guarantees the products that factory leaving Reliability testing – the R-test www.profoto.com 13 AcuteB2 600 AirS 14 AcuteB2 600 AirS 1. Settings 2. 1. Turn on generator 1. Lamp head connection Operating instructions www.profoto.com 3. 2. 1. Sync via radio – Profoto Air 2. 1. Sync via Photocell 1. Sync via cable 3. 2.

Connecting Lamp ead H Use the Modeling Light Switch [11] to select The Ready Lamp [8] will be illuminated when the generator is ready. Set the On/Off Switch [9] to ring on the plug clockwise. dots on the plug with the white dot on the generator panel. Secure When by connecting turning the the lamp head plug to the Lamp Head Socket [1], align the white The AcuteB2 generator is now ready to flash, with the selected radio channel. Indicator [14] is illuminated. To change channel, press the Channel Button [13] until the desired Channel The Channel Indicator [14] of the previously used channel will be illuminated. Press and hold down the Radio On/Off Button [12] to turn on the Profoto Air receiver. Set the Photocell Switch [7] to Connect an IR transmitter to the camera. Connect a sync cord from the camera or a flash meter to the Sync Socket [5]. Use the Sound Switch [17] to turn on/off the audible sounds. Use the Energy Switch [16] and the Energy Control [15] to set the energy level. ON. SLAVE. EXT, BAT or OFF. 1. The generator automatically turns off after 120 minutes when not in use. Turn off generator from triggering to prevent the receiver from locking to the incorrect channel. N 4. 3. 2. 1. To change channel and zone: The previously used channel and zone is selected by default. The Pocket Wizard radio receiver is always in operation Sync while via radio the – generator Pocket is Wizard powered on. ote

To turn off the generator, press and hold down the On/Off Switch [9] for 2 seconds. period until the flash triggers. transmitter, press the measure button repeatedly within the 30 second learning (up to 4 seconds) until flash triggers. If using a Sekonic meter with Within radio 30 module seconds, as press and hold the TEST button on the Pocket Wizard device Turn on the generator. Turn off the generator and wait 5 seconds. Transceiver). Select the desired channel and zone on the Pocket Wizard device (Transmitter or :

During channel and zone selection, other Pocket Wizard transmitters should refrain www.profoto.com 15 AcuteB2 600 AirS 16 AcuteB2 600 AirS 1. Charging the battery separately: charging time depends on the type of charger, see section The battery can be charged separately or with the battery in place in the generator. The Battery charging 2. 1. Battery replacement Maintenance www.profoto.com

Release battery Changing Battery Battery Charging Socket on the battery, see figure below. Connect the Profoto Charger 1A or the Profoto Charger 2A to the Battery Charge safety clamp, which indicate that the battery is properly secured. battery all the way into the generator. Make sure there is a Make “click”sure the sound text from each “This side up” on the new battery is facing upwards. Push the Release the battery by squeezing the two safety clamps. Pull out the battery. Squeeze Socket Socket Charge Battery This side up. PULL CHARGE 40 A ® Squeeze Insert battery Changing Battery Click! Technical . data Push ® Click! warranty. Malfunctions and defects created by the use of a third-party battery are not covered by lead to improper function and even damage the generator. Use original Profoto Pb or LiFe batteries only! Batteries made by other IMPOR manufacturers can 2. 1. The 40 A fuse holder is placed on top of the battery. Changing battery fuse 1. Charging the battery in place in the generator:

Changing Battery Fuse Gently push the new 40 A fuse all the way into the fuse holder. Pull out the fuse. the operating time considerably. To use the AcuteB2 while charging we recommend the 2A charger that will increase on the generator. The generator can be used during the battery charging. Connect the Profoto Charger 1A or the Profoto Charger 2A to the Charge Socket [2] TANT INFORMATION: CHARGE 40 A www.profoto.com 17 AcuteB2 600 AirS 18 AcuteB2 600 AirS * Special adapter needed for modeling light. specific information. Please consult with your local dealer or distributor for Shoulder Strap Profoto Charger 2A Profoto Charger 1A Profoto Adapter 85 W Pocket Wizard Transceiver Profoto Air Sync/Remote Acute Kit Bag 65W Model Lamp Adapter Acute/D4 Ring Acute/D4 Twin* Acute/D4 Head* Acute-B Head Accessories www.profoto.com Technical data Battery Battery life Battery status indicator Battery charging time Battery type Auto Dumping Energy Energy Range Energy Precision Flash Duration (t0.5) Modeling light LiFe Pb No of flashes at different energy settings Flash Capacity Recycling time f-stop at 2 m (ISO 100/21º) Energy Control Input Energy Pb battery: LiFe battery: Pb battery: there is capacity for just a few more flashes. battery, the indicator will remain on max until it suddenly drops when LiFe battery: 5 h with Profoto Charger 1A 2.5 h with Profoto Charger 2A Pb battery: LiFe battery: Yes f-stop: Ws: 1/75 f-stop flash-to-flash Ev: Time: Flashes: Ws: 65W continuous modeling light (similar to 90W halogen) Energy: Ws: Pb battery: LiFe battery: 64.2 with Magnum 50º reflector Over a seven f-stop range, in 2/10 step adjustments 12 V 600 Ws Flashes:

600 1/1 Max 200 1/1000 160 600 Max 600

300 charge cycles 80% capacity left 1 200 charge cycles 80% capacity left 1/1, 1/2 and 1/4 indicators Yes, but because of the discharge characteristics of the 12.0 V, 5.0 Ah, Non-spillable lead/acid 13.2 V, 4.6 Ah, LiFePo4 0.09-2.5 s @ full 0.08-2.0 s @ full

400 320

300 -1 1/2 1/2700 150 -1 300

600 800

150 -2 1/4 1/6800 37 -2 150 1200 1600

75 -3 1/8 -3 75

2000 3200 37 -4 1/16 -4 37

www.profoto.com

4000 6400 18 -5 1/32 -5 18

8000 (Pb) 12800 (LiFe) 9 -6 1/64 -6 9 19 AcuteB2 600 AirS 20 AcuteB2 600 AirS without further notice. All data are to be considered as nominal and Profoto the reserves right make changes www.profoto.com Weight Size Sync Voltage Sync Socket Radio remote control Radio Sync Lamp Head Socket Fuse Battery Battery storage temperature range Battery operating temperature range 4.8 kg /10.6 lbs), including Pb battery 3.6 kg (8.9 lbs), including LiFe battery 2.8 kg (6.2 lbs), exclusive of battery (w) 19 x (d) 13.5 x (h) 20 cm (7.5 x 5.3 x 7.9 in) incl. handle. Compliant to ISO 10330 Standard 1 socket No Pocket Wizard: range up to 100 m, channel selector learn mode Profoto Air: range up to 300 m, channel selector on generator 1 socket 40 A Pb battery: LiFe battery: Pb battery: LiFe battery:

-10 ºC to +40 ºC (+14 ºF to +100 ºF) -30 ºC to +60 ºC (-20 ºF to +140 ºF) +5 ºC to +30 ºC (+40 ºF to +86 ºF) -20 ºC to +50 ºC (-4 ºF to +120 ºF) Remote unit shall be operated and make sure that they are followed. N may apply. Range Devices). This band may be used in most parts of the (Short world.SRD for band Regional ISM 2.4GHz restrictions license-free the on operates system Profoto Air The World-wide Usage of The regulatory information in this section applies to the Profoto Air system. information–ProfotoAir Regulatory ote : Refer to national regulations for the region where the Profoto Air Sync or Profoto Air Radio Spectrum www.profoto.com 21 AcuteB2 600 AirS 22 AcuteB2 600 AirS EN 300 328 Air Interface of the radio systems pursuant to article 3(2) Harmonised standards applied: intended purpose. other relevant provisions of the FTEG (Article 3 of the R&TTE Directive) when used for its Profoto declares that the product complies with the essential requirements of §3 and the Skarpnäck, 2009-03-02 EN 301 489-1, EN 301 489-17, EN 61000-4-3 Protection requirements concerning electromagnetic compatibility according to article 3(1)b: Type: Product: Address: Manufacturer: Directive 1999/5/EC (R&TTE Directive) and Act TelecommunicationsEquipment Terminaland Radio the with accordance In EU Declaration ofConformity www.profoto.com

Profoto Air Remote, Profoto Air Sync, Profoto Air USB 2.4GHz SRD communication module Box 2023, 128 21 SKARPNÄCK, Sweden Profoto AB ………………………………………… Bo Dalenius, VP Technology and QA

Profoto AB Made in Sweden IC: 8167A-RMI FCC ID: W4G-RMI PRODUCT NO: PCA5104-0000 MODEL: Profoto Air USB PRODUCT NO: PCA5102-0000 MODEL: Profoto Air Remote PRODUCT NO: PCA5108-0000 MODEL: Profoto Air Sync Transmitter / Receiver Profoto AB suit comme le numéro de certification/d’enregistrement d’Industrie Canada. Les lettres ‘IC’ n’ont aucune autre signification ni aucun autre but que d’identifier ce qui Canada technical specifications were met. The term ‘IC’ before the certification/registration number only signifies that the Industry 2) 1) L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes : Ce dispositif est conforme aux normes RSS-210 d’Industrie Canada. authority to operate the equipment. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s 1) Operation is subject to the following two conditions: This device complies with Part 15 of FCC rules and RSS-210 of Industry Compliance Canada. Statement ( Part 15.19) F Unites StatesandCanada 2) Warning (Part 15.21) .C Canada and Industry

dispositif. reçu, même si ce radioélectrique brouillage est susceptible brouillage de compromettre le tout fonctionnement du accepter à prêt être doit dispositif du l’utilisateur il ne doit pas produire de brouillage et this device may not cause harmful interference and, cause undesired operation. this device must accept interference any received, including interference may that

www.profoto.com 23 AcuteB2 600 AirS 24 AcuteB2 600 AirS accordance with the provisions of in granted Article been has 38-24, type by Paragraph certification above-mentioned 1 the of that certify the to Radio is This Law. のであることを証する。 上記のとおり、電波法第 38条の 24第 1項の規定に基づく認証を行ったも 2.4 GHz Wide Band Low Power Data Communication Article 2, Clause 1, Item 19 Classification of specified radio equipment: 特定無線設備の種類 The module has been granted modular approval for sale and operation in Japan. Japan www.profoto.com R 202WW08109204 R 202WW08109203 R 202WW08109202

• • • correct the interference by one or more of the following measures: can be determined by turning the equipment off and on, the user is encouraged to try to If this equipment does cause harmful interference to radio or television reception, which However, there is no guarantee that interference will not occur in a particular installation. to radio communications. installed and used in not accordance with if the and,instructions, energy may frequencycause harmful radio interference radiate can and uses generates, equipment This provide reasonable protection against harmful interference in a residential installation. Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to The Pocket Wizard equipment has been tested and found to comply with the limits for a Unites States strictly forbidden by law to use these frequencies in other countries. with the local Profoto distributor BEFORE you activate the Pocket Wizard Transmitter. If It you are is in any doubt about the frequency allowed in your country, please get The in Pocketcontact Wizard radio system is operating on eitherOperating frequencies 344 MHz (USA) or 433 MHz (Europe). The regulatory information in this section applies to the Pocket Wizard system. information–PocketRegulatory Wizard Consult the dealer or an experienced technician for help. generator is connected. Connect the equipment into an outlet on a circuit different from that to which the Reorient or relocate the receiving antenna by changing the position of the generator. www.profoto.com 25 AcuteB2 600 AirS 26 AcuteB2 600 AirS www.profoto.com 334015-1-816. Printed in Sweden. in Printed 334015-1-816. Technical data and product information are subject to change without notice. notice. without change to subject are information product and data Technical

Profoto AB P.O. Box 2023 SE-128 21 Skarpnäck SWEDEN

Phone +46 8 447 53 00 [email protected] www.profoto.com