Automatic Bollards

INDEX A U T O M A T I C B O L A R D S A U T O M A T I C B O L A R D S A U T O M A T I C B O L A R D S A U T O M A T I C B O L A R D S AUTOM

Company Profile 2 Automatic Bollards 7 Pneumatic Bollards 8 Hydraulic Bollards 12 Electric Bollards 16 Antiterrorism Automatic Bollards 20 Security Bollards 22 Supplements for Bollards 24 Electric Cupboards 26 Security in Control Access 29 Vehicle Detection System 30 Software 32 Energy System 34 Installation Bollards 36 Installation Cupboards 38 Semiautomatic Bollards 41 Extractable Bollards 45 Fixed Bollards 51 Other Bollards 55 Spike Barriers 58 Road Blockers 59 Reservation Parking System 60 Other Security Devices 61 Speed Reducers 62 Electrical Power Supply 63 Sales Terms 64 AUTOM L A R D S A T I C B O A U T O M L A R D S A T I C B O A U T O M L A R D S A T I C B O A U T O M L A R D S A T I C B O A U T O M INTRODUCTION

Presion y Fuerza, S.L. was established in Navarra in 1.996, and rapidly consolidated a niche in the national market as a leader in the security and control access technologies of the street furniture sector. Presion y Fuerza was one of the first European companies to aggressively enter the global market, specialising in automatic bollards.

2 Introduction Competing with giant firms with diverse security and control access production that distribu- ted limited systems, Presion y Fuerzaʼs strategy focused on manufacture and the development of automatic bollards, specialising in the following three basic sectors:

• “Control access bollards designed for pedestrian areas”

• “Security anti-terrorism bollards for retail outlets, high-end jewellery stores, high security zones including government buildings and ministries, embassies and consulates, armed forces headquarters and buildings, police force stations, and a long etc”

• “Bollards to protect private homes, sports centres, nautical clubs, public parkings…”

Introduction 3 Since its creation, Presion y Fuerzaʼs priority is to address As Presion y Fuerza is a manufacturer, its experts can adapt all technical, aesthetic and functional requirement de- its products according to the special requirements for im- mands by not only the private but also public sectors. Its plementation and client needs, with different diameters, focus is on design, manufacture, sales and maintenance heights, thickness and materials. Therefore, depending on of a wide range of automatic bollards of the highest quality. the security needs, we can adapt thickness from 3, 4, 5, 6, Presion y Fuerza custom manufactures as well to adapt to 12, up to 22 mm. all sectors, accepting all necessary variant demands from its clients, complying with all special technical requirements Presion y Fuerza's antiterrorism Bollards PNI-161-22mm exclusively in each case. undergo certifications test set by "U.S. DOS" level K12 (6,800 kg to 80 kph = 1,695,000 J) vehicle impact resistance The bollards of Presion y Fuerza comply with the French of the then specification SD.STD-02.01 level K12, now re- norms NF P 98,310 and in accordance with the directive placed by the corresponding ASTM-F2656-07, and certifi- 73/23/CEE. The firmʼs technologies moreover have the ap- cation BSI-PAS68. proval of the Ministero dei Trasporti, Dipartimento per i Tras- porti Terrestri, Direzione Generale per la Motorizzazione norms.

Tariff Code nº 86.08.00.30.00

When manufacturing for both interiors as well as exteriors, Presion y Fuerza looks after its product quality by utilising the highest quality stainless steel, that is, AISI-316-L marine anticorrosive in all the pieces and components. The said components undergo rigorous quality control and are indivi- dually tested. Furthermore, the pieces and components undergo durability and wear and tear tests to ensure maximum security, increase technology life-time and reduce maintenance of the systems to a minimum.

Quality control is seriously pursued as a strategy to enhance our competitiveness, and indeed is one of our basic pillars. Presion y Fuerzaʼs mission is to constantly develop new testing machines to further enhance the life of automatic and semiautomatic bollards, putting all its components through rigorous testing. These characteristics stand out when our bollards are compared to those of other manufacturers.

4 Introduction Presion y Fuerza has a wide range of 200 automatic and semiautomatic bollards and 90 extractable and fixed models, with extensive remote control command, and automatic systems, (electric and electronic cupboards, power groups, remote controls, proximity cards, GSM system, ADSL, etc); additionally, the elements to solve control access problems, whether to regulate traffic or to protect (speed reducers, guide posts, traffic lights, etc)

Presion y Fuerza is a young, innovative corporation that puts its bets on new technologies, daily adapting its products according to market demands. This policy focuses on new cha- llenges and opportunities that new technology provides. As a result of this, Presion y Fuerza invests a big chunk of its funds annually in the R & D department, constantly introdu- cing innovative new products in the market, and adapting the current products finding solutions to the ever changing All of Presion y Fuerza production is tested under the rigo- necessities of the sector. rous standards applied by CE, UL and CCC, which are a guarantee of quality of its production; making Presion Y Fuerza second to none in the national competitive market. The quality standards are an essential requirement in the global market.

Finally, Presion y Fuerza due to its continuous involvement in diverse countries (12 exhibitions per year, fairs and shows), makes exhaustive market research studies in different countries in order to know the special requirements of each region first hand, and therefore be ahead of its com- petitors.

Presion y Fuerza reserves the right to modify its range and products without any previous advice.

Introduction 5

AUTOMATIC

BOLLARDS A U T O M I C B L A R D S U T O M I C B O L A R D S U T M A T I C B O L R D S A U T O M I C B L A R D S U T O M I C B O L A R D S U T M A T I C B O L R D S A U T O M I C B L A R D S U T O M I C B O L A R D S U T M A T I C B O L R D S AUTOMATICBOLL

AUTOMATIC BOLLARDS are designed to control access in public and private areas to regulate traffic fluidity in urban and pedestrian zones and to guarantee the antiterrorism security at embassies, military zones, police stations, banks and other vulnerable places.

Wai-Hai Government. China Automatic Bollards are a perfect solution for security needs against terrorism at restricted and protected access zones; those bollards are specially designed to support a crash Automatic Bollards depend on the daily Use or the Fre- of a vehicle collision without deforming or affecting the quency of pop-ups requirements, are accordingly recom- system. mended from the following list: Maximum resistance to collisions is a distinctive characteristic of the Presion y Fuerza products. All bollards are cre- PNEUMATIC BOLLARDS ated with a personal design to make bigger the resistance.

Access control where intensive use is applicable. Presion y Fuerza bollards are submitted to crash tests in Recommended for 20,000 cycles per day. order to guarantee perfect operational functions. Additio- Simplicity of installation and maintenance, reliability in nally, they are tested in durability studies, reaching more operations, and longevity. than 10,000,000 cycles without having to change any piece. The durability of its components is excellent, such as valves that go through test frequencies of 25,000,000 cycles, and HYDRAULIC BOLLARDS cylinders of up to 16, 000,000 cycles without demonstrating any wear and tear. Anti-terrorism security Recommended for 1.000 Cycles per day applicable. The application of Presion y Fuerza automatic bollards is Maximum lifting strength and resistance to vertical loads. designed for areas of many users entailing their constant movements; the pop-ups and pop-downs are automatic (in- itiated via remote control, proximity card, push button, GSM, ELECTRIC BOLLARDS GPRS, etc).

High security and private use (residences, garages, etc) with Usually, Presion y Fuerza manufactures its control systems Slightly Intensive Use. In this case, heavy traffic flows not in Stainless Steel AISI-316-L Marine Anticorrosive due to recommendable. its proven durability against water, rain, snow, nitrate, sand Recommended where 100 cycles per day applicable. and collisions. This material is considered the best compared to any other. In some cases Presion y Fuerza manufactures its bollards in steel that is plastified or galvanized, SECTORS OF APPLICATION covered in rubber or recycled materials, as required by its Barcelona Goverment clients. PNEUMATIC BOLLARD Even though its standard equipments height is up to 500mm Access control: Pedestrian areas access control, traffic 700mm or 1000mm, Presion y Fuerza, as a manufacturer, control, access to squares, streets and avenues control ac- adapts its bollards dimensions according to specific requi- cess … rements of each client. 8mm is considered standard thickness. Nevertheless bollards are manufactured with steel HYDRAULIC BOLLARDS sheet thickness always depending on the application, for example, the anti-terrorism bollards are manufactured with High security: Embassies, Ministries, Military Bases, Po- 22mm thickness. lice, Industries, Banks, etc… Storm-water drainage is necessary ELECTRIC BOLLARDS The external covers are usually manufactured in a round Security bollards: Commercial areas, Private Homes, shape, but they can be square, rectangular or in special sha- Sports Centres, Nautical Clubs. pes as requested by clients.

Automatic Bollards 7 LLARDSAUTOMATIC A R D S U T O M I C B D S A U T O M I C B L A U T O M I C B L R T O M A I C B L R D S M A T I C B O L R D S U A T I C B O L R D S U I C B O L A R D S U T M B O L A R D S U T M L A R D S U T O M I C A R D S U T O M I C B D S A U T O M I C B L A U T O M I C B L R AUTOMATIC PNEUMATIC BOLLARDS

For intensive use with many users. Recommended for 20,000 cycles per day.

• Automatic rising and falling with double pneumatic effect, remote controlled, proximity cards, manual control button, GSM, etc.

• To solve access control problems and to regulate traffic fluidity.

• Series Ø 324mm / Ø 274mm / Ø 220mm / Ø 168mm / Ø 141mm

• Storm-water drainage is necessary

BOLLARDS SUPPLEMENTS

Milling and Reflective Band: Double, 32 mm x 1,5 mm Depth, Level 3 retro-reflective Lighting: 6 Leds Shield or Logo: Printed shield or logo with laser Bollards Embellishment: 12 Large Milling Flashing Light: Flashing lights by movement Antifreeze heater: For areas of low temperatures Gradient for slopes Tafalla, Spain.

Technical Information Pneumatic Bollards

Ø 324mm Ø 274mm Ø 220mm Ø 168mm Ø 141mm

Bollard Diameter 324mm 274mm 220mm 168mm 141mm Standard High Bollard 500, 700,1000mm 500, 700,1000mm 500, 700,1000mm 500, 700,1000mm 500, 700,1000mm

Standard Thickness Bollard 9,53mm 9,27mm 8,18mm 7,11mm 6,55mm Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel AISI-316-L AISI-316-L AISI-316-L AISI-316-L AISI-316, Material Plastified Steel Plastified Steel Plastified Steel Plastified Steel Plastified Steel

Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic Action (double action) (double action) (double action) (double action) (double action)

Fall Time (500mm) 3-5 seg. 3-5 seg. 3-5 seg. 3-5 seg. 3-5 seg.

Rise Time (500mm) 4-6 seg. 4-6 seg. 4-6 seg. 4-6 seg. 4-6 seg.

Equivalent Impact Strength K8 K8 K8 K8 K8

As Presion y Fuerza is a manufacturer, its experts can adapt its products according to the special requirements for implementation and client needs, with different diameters, heights, thickness and materials.

8 Automatic Bollards Nicosia, Cyprus Tuborg, Denmark

Burgos, Spain

Automatic Bollards 9 MATICBOLLARDS C B O L A R D S U T L A R D S U T O M I S A U T O M I C B L O M A T I C B L R D I C B O L A R D S U T L A R D S U T O M D S A U T O M I C B T O M A I C B L R A T I C B O L R D S U B O L A R D S U T M A R D S U T O M I C A U T O M I C B L PNEUMATIC BOLLARDS REFERENCES

Alcázar de San Juan Rashid Tower, Dubai.

SERIES Ø 324mm

Pneumatic Bollard Model Stainless Steel AISI-316-L Round Cover PNI-561-9mm Pneumatic Bollard Stainless Steel TR Ø 324 H 500 E 9,53 PNI-761-9mm Pneumatic Bollard Stainless Steel TR Ø 324 H 700 E 9,53 PNI-161-9mm Pneumatic Bollard Stainless Steel TR Ø 324 H 1.000 E 9,53

Pneumatic Bollard Model Plastified Steel Round Cover PNA-561-9mm Pneumatic Bollard Plastified Steel TR Ø 324 H 500 E 9,53 PNA-761-9mm Pneumatic Bollard Plastified Steel TR Ø 324 H 700 E 9,53 PNA-161-9mm Pneumatic Bollard Plastified Steel TR Ø 324 H 1.000 E 9,53

SERIES Ø 274mm

Pneumatic Bollard Model Stainless Steel AISI-316-L Round Cover PNI-551-9mm Pneumatic Bollard Stainless Steel TR Ø 274 H 500 E 9,27 Pneumatic security bollard PNI-751-9mm Pneumatic Bollard Stainless Steel TR Ø 274 H 700 E 9,27 D220mm H 800mm PNI-151-9mm Pneumatic Bollard Stainless Steel TR Ø 274 H 1.000 E 9,27

Pneumatic Bollard Model Plastified Steel Round Cover PNA-551-9mm Pneumatic Bollard Plastified Steel TR Ø 274 H 500 E 9,27 PNA-751-9mm Pneumatic Bollard Plastified Steel TR Ø 274 H 700 E 9,27 PNA-151-9mm Pneumatic Bollard Plastified Steel TR Ø 274 H 1.000 E 9,27

SERIES Ø 220mm

Pneumatic Bollard Model Stainless Steel AISI-316-L Round Cover PNI-541-8mm Pneumatic Bollard Stainless Steel TR Ø 220 H 500 E 8,18 PNI-741-8mm Pneumatic Bollard Stainless Steel TR Ø 220 H 700 E 8,18 PNI-141-8mm Pneumatic Bollard Stainless Steel TR Ø 220 H 1.000 E 8,18

Pneumatic Bollard Model Plastified Steel Round Cover PNA-541-8mm Pneumatic Bollard Plastified Steel TR Ø 220 H 500 E 8,18 Gradient supplement, leds PNA-741-8mm Pneumatic Bollard Plastified Steel TR Ø 220 H 700 E 8,18 and reflective band PNA-141-8mm Pneumatic Bollard Plastified Steel TR Ø 220 H 1.000 E 8,18

10 Automatic Bollards Ø 324 x 1000 - K12Ø 220 x 700 Ø 220 x 500 Ø 141 x 500 Ø 114 x 500

SERIES Ø 168mm

Pneumatic Bollard Model Stainless Steel AISI-316-L Round Cover PNI-571-7mm Pneumatic Bollard Stainless Steel TR Ø 168 H 500 E 7,11 PNI-771-7mm Pneumatic Bollard Stainless Steel TR Ø 168 H 700 E 7,11 PNI-171-7mm Pneumatic Bollard Stainless Steel TR Ø 168 H 1.000 E 7,11

Pneumatic Bollard Model Plastified Steel Round Cover PNA-571-7mm Pneumatic Bollard Plastified Steel TR Ø 168 H 500 E 7,11 PNA-771-7mm Pneumatic Bollard Plastified Steel TR Ø 168 H 700 E 7,11 PNA-171-7mm Pneumatic Bollard Plastified Steel TR Ø 168 H 1.000 E 7,11

SERIES Ø 141mm

Pneumatic Bollard Model Stainless Steel AISI-316-L Round Cover PNI-531-6mm Pneumatic Bollard Stainless Steel TR Ø 141 H 500 E 6,55 PNI-731-6mm Pneumatic Bollard Stainless Steel TR Ø 141 H 700 E 6,55 PNI-131-6mm Pneumatic Bollard Stainless Steel TR Ø 141 H 1000 E 6,55

Pneumatic Bollard Model Plastified Steel Round Cover PNA-531-6mm Pneumatic Bollard Plastified TR Ø 141 H 500 E 6,55 PNA-731-6mm Pneumatic Bollard Plastified TR Ø 141 H 700 E 6,55 PNA-131-6mm Pneumatic Bollard Plastified TR Ø 141 H1000 E 6,55

Automatic Bollards 11 LLARDSAUTOMATIC A R D S U T O M I C B D S A U T O M I C B L A U T O M I C B L R T O M A I C B L R D S M A T I C B O L R D S U A T I C B O L R D S U I C B O L A R D S U T M B O L A R D S U T M L A R D S U T O M I C A R D S U T O M I C B D S A U T O M I C B L A U T O M I C B L R AUTOMATIC HYDRAULIC BOLLARDS

Security Series

For high security applications of up to 1,000 pop-ups and downs per day

• Automatic rising and withdrawing with hydraulic double effect controlled by remote control, or proximity cards, manual control buttons, GSM, etc.

• Hydraulic system is placed not within the bollard, Cordova Spain. instead inside the control cupboard.

• To guarantee antiterrorism security at embassies, Flashing Light: Flashing lights by movement consulates, military zones, police stations, banks, Antifreeze heater: For areas of low temperatures etc. Gradient for slopes

• Series Ø 324mm / Ø 274mm / Ø 220mm / Ø 168mm Domestic Series • Storm-water drainage is necessary. • Hydraulic power within the bollard.

BOLLARDS SUPPLEMENTS • Automatic rising and withdrawing double effect hydraulic system, regulated by remote control, pro- Milling and Reflective Band: Double, 32 mm x 1,5 mm ximity cards, manual control button, GSM, etc. Depth, Level 3 retro-reflective Lighting: 6 Leds • Domestic applications, intensive use. Shield or Logo: Printed shield with laser Bollards Embellishment: 12 Large Milling • Storm-water drainage is necessary.

Technical Information Hydraulic Bollards

Ø 324mm Ø 274mm Ø 220mm Ø 220mm Domestic Ø 168mm

Bollard Diameter 324 mm 274 mm 220 mm 220 mm 168 mm

Standard High Bollard 500, 700,1000mm 500, 700,1000mm 500, 700,1000mm 500, 700,1000mm 500, 700,1000mm

Standard Thickness 8,18 mm Bollard 9,53 mm 9,27 mm 8,18 mm 3,76 mm 7,11 mm Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel AISI-316-L AISI-316-L AISI-316-L AISI-316-L AISI-316-L Material Plastified Steel Plastified Steel Plastified Steel Plastified Steel Plastified Steel

Action Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic

Fall Time (500mm) 4-6 seg. 4-6 seg. 3-5 seg. 3-5 seg. 3-5 seg.

Rise Time (500mm) 5-7 seg. 5-7 seg. 4-6 seg. 4-6 seg. 4-6 seg.

Equivalent Impact Strength K8 K8 K8 K8 K8

The advantage of Presion y Fuerza being a manufacturer is, its experts can adapt all products according to the specified requirements of each implementation and clientʼs needs, utilising different diameters, heights, thickness and/or materials.

12 Automatic Bollards Burgos. Spain.

Automatic Bollards 13 MATICBOLLARDS C B O L A R D S U T L A R D S U T O M I S A U T O M I C B L O M A T I C B L R D I C B O L A R D S U T L A R D S U T O M D S A U T O M I C B T O M A I C B L R A T I C B O L R D S U B O L A R D S U T M A R D S U T O M I C A U T O M I C B L AUTOMATIC SERIES Ø 324mm

HYDRAULIC Hydraulic Bollard Model Stainless Steel AISI-316-L Round Cover BOLLARDS PHI-561-9mm Hydraulic Bollard Stainless Steel TR Ø 324 H 500 E 9,53 PHI-761-9mm Hydraulic Bollard Stainless Steel TR Ø 324 H 700 E 9,53 SECURITY PHI-161-9mm Hydraulic Bollard Stainless Steel TR Ø 324 H 1.000 E 9,53 Hydraulic Bollard Model Plastified Steel Round Cover PHA-561-9mm Hydraulic Bollard Plastified Steel TR Ø 324 H 500 E 9,53 PHA-761-9mm Hydraulic Bollard Plastified Steel TR Ø 324 H 700 E 9,53 PHA-161-9mm Hydraulic Bollard Plastified Steel TR Ø 324 H 1.000 E 9,53

SERIES Ø 274mm

Hydraulic Bollard Model Stainless Steel AISI-316-L Round Cover PHI-551-9mm Hydraulic Bollard Stainless Steel TR Ø 274 H 500 E 9,27 PHI-751-9mm Hydraulic Bollard Stainless Steel TR Ø 274 H 700 E 9,27 PHI-151-9mm Hydraulic Bollard Stainless Steel TR Ø 274 H 1.000 E 9,27

Hydraulic Bollard Model Plastified Steel Round Cover PHA-551-9mm Hydraulic Bollard Plastified Steel TR Ø 274 H 500 E 9,27 PHA-751-9mm Hydraulic Bollard Plastified Steel TR Ø 274 H 700 E 9,27 PHA-151-9mm Hydraulic Bollard Plastified Steel TR Ø 274 H 1.000 E 9,27

SERIES Ø 220mm

Hydraulic Bollard Model Stainless Steel AISI-316-L Round Cover PHI-541-8mm Hydraulic Bollard Stainless Steel TR Ø 220 H 500 E 8,18 PHI-741-8mm Hydraulic Ollard Stainless Steel TR Ø 220 H 700 E 8,18 PHI-141-8mm Hydraulic Bollard Stainless Steel TR Ø 220 H 1.000 E 8,18

Hydraulic Bollard Model Plastified Steel Round Cover PHA-541-8mm Hydraulic Bollard Plastified Steel TR Ø 220 H 500 E 8,18 PHA-741-8mm Hydraulic Bollard Plastified Steel TR Ø 220 H 700 E 8,18 PHA-141-8mm Hydraulic Bollard Plastified Steel TR Ø 220 H 1.000 E 8,18

SERIES Ø 168mm Presion y Fuerza Factory. Hydraulic Bollard Model Stainless Steel AISI-316-L Round Cover PHI-571-7mm Hydraulic Bollard Stainless Steel TR Ø 168 H 500 E 7,11 PHI-771-7mm Hydraulic Bollard Stainless Steel TR Ø 168 H 700 E 7,11 PHI-171-7mm Hydraulic Bollard Stainless Steel TR Ø 168 H 1.000 E 7,11

Hydraulic Bollard Model Plastified Steel Round Cover PHA-571-7mm Hydraulic Bollard Plastified Steel TR Ø 168 H 500 E 7,11 PHA-771-7mm Hydraulic Bollard Plastified Steel TR Ø 168 H 700 E 7,11 PHA-171-7mm Hydraulic Bollard Plastified Steel TR Ø168 H 1.000 E 7,11

SERIES Ø 220mm - Domestic

Hydraulic Bollard Domestic Model Stainless Steel AISI-316-L Round Cover PHID-541-8mm Hydraulic Bollard Stainless Steel TR Ø 220 H 500 E 8,18 - 3,76 PHID-741-8mm Hydraulic Ollard Stainless Steel TR Ø 220 H 700 E 8,18 - 3,76 PHID-141-8mm Hydraulic Bollard Stainless Steel TR Ø 220 H 1.000 E 8,18 - 3,76

Hydraulic Bollard Domestic Model Plastified Steel Round Cover PHAD-541-8mm Hydraulic Bollard Plastified Steel TR Ø 220 H 500 E 8,18 - 3,76 PHAD-741-8mm Hydraulic Bollard Plastified Steel TR Ø 220 H 700 E 8,18 - 3,76 Irun, Spain PHAD-141-8mm Hydraulic Bollard Plastified Steel TR Ø 220 H 1.000 E 8,18 - 3,76

14 Automatic Bollards PHI-541-3’76 mm PHI-541-3’76 mm

Automatic Bollards 15 LLARDSAUTOMATIC A R D S U T O M I C B D S A U T O M I C B L A U T O M I C B L R T O M A I C B L R D S M A T I C B O L R D S U A T I C B O L R D S U I C B O L A R D S U T M B O L A R D S U T M L A R D S U T O M I C A R D S U T O M I C B D S A U T O M I C B L A U T O M I C B L R AUTOMATIC ELECTRIC BOLLARDS

Pamplona

For domestic use, providing protection against vandalism acts and/or robbery.

• Recommended when high level of daily use is not required, up to 100 pop-ups per day

• Automatic electrical rising and withdrawal, with remote control, proximity cards, and manual control button, GSM, etc. BOLLARDS SUPPLEMENTS • Conceived to protect private homes, small public parkings or garages, businesses and jewellery stores etc… against vandalism acts. Milling and Reflective Band: Double, 32 mm x 1,5 mm Depth, Level 3 retro-reflective • Series Ø 324mm / Ø 274mm / Ø 220mm / Ø 168mm Lighting: 6 Leds / Ø 141mm / Ø 114mm Shield or Logo: Printed shield with laser Bollards Embellishment: 12 Large Milling • Recommended for private vehicles and not public Flashing Light: Flashing lights by movement thoroughfare areas. Antifreeze heater: For areas of low temperatures Gradient for slopes • Storm-water drainage is necessary.

Technical Information Electric Bollards

Ø 324mm Ø 274mm Ø 220mm Ø 168mm Ø 141mm Ø 114mm

Bollard Diameter 324mm 274mm 220mm 168mm 141mm 141mm

Standard High Bollard 500, 700,1000mm 500, 700,1000mm 500, 700,1000mm 500, 700,1000mm 500, 700,1000mm 500, 700,1000mm

Standard Thick- ness Bollard 9,53mm 9,27mm 8,18mm 7,11mm 6,55mm 8,56mm Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel AISI-316-L , AISI-316-L , AISI-316-L , AISI-316-L , AISI-316-L , AISI-316-L , Material Plastified Steel Plastified Steel Plastified Steel Plastified Steel Plastified Steel Plastified Steel

Action Electric Electric Electric Electric Electric Electric

Fall Time (500mm) 8 seg. 8 seg. 8 seg. 3-5 seg. 3-5 seg. 3-5 seg.

Rise Time (500mm) 5-9 seg. 5-9 seg. 4-6 seg. 4-6 seg. 4-6 seg. 4-6 seg.

Equivalent Impact Strength K8 K8 K8 K8 K8 K8

As Presion y Fuerza is a manufacturer, its experts can adapt all products according to the specified requirements of each implementation and clientʼs needs, adapting to different diameters, heights, thickness and materials.

16 Automatic Bollards Pozuelo Paseo de Francia

El Bercial. Getafe Mijas

Automatic Bollards 17 MATICBOLLARDS C B O L A R D S U T L A R D S U T O M I S A U T O M I C B L O M A T I C B L R D I C B O L A R D S U T L A R D S U T O M D S A U T O M I C B T O M A I C B L R A T I C B O L R D S U B O L A R D S U T M A R D S U T O M I C A U T O M I C B L ELECTRIC SERIES Ø 324mm

BOLLARDS Electric Bollard Model Stainless Steel AISI-316-L Round Cover REFERENCES PEI-561-9mm Electric Bollard Stainless Steel TR Ø 324 H 500 E 9,53 PEI-761-9mm Electric Bollard Stainless Steel TR Ø 324 H 700 E 9,53 PEI-161-9mm Electric Bollard Stainless Steel TR Ø 324 H 1.000 E 9,53

Electric Bollard Model Plastified Steel Round Cover PEA-561-9mm Electric Bollard Plastified Steel TR Ø 324 H 500 E 9,53 PEA-761-9mm Electric Bollard Plastified Steel TR Ø 324 H 700 E 9,53 PEA-161-9mm Electric Bollard Plastified Steel TR Ø 324 H 1.000 E 9,53

SERIES Ø 274mm

Electric Bollard Model Stainless Steel AISI-316-L Round Cover PEI-551-9mm Electric Bollard Stainless Steel TR Ø 274 H 500 E 9,27 PEI-751-9mm Electric Bollard Stainless Steel TR Ø 274 H 700 E 9,27 PEI-151-9mm Electric Bollard Stainless Steel TR Ø 274 H 1.000 E 9,27

Electric Bollard Model Plastified Steel Round Cover PEA-551-9mm Electric Bollard Plastified Steel TR Ø 274 H 500 E 9,27 PEA-751-9mm Electric Bollard Plastified Steel TR Ø 274 H 700 E 9,27 PEA-151-9mm Electric Bollard Plastified Steel TR Ø 274 H 1.000 E 9,27

SERIES Ø 220mm

Electric Bollard Model Stainless Steel AISI-316-L Round Cover PEI-541-8mm Electric Bollard Stainless Steel TR Ø 220 H 500 E 8,18 PEI-741-8mm Electric Bollard Stainless Steel TR Ø 220 H 700 E 8, 18 PEI-141-8mm Electric Bollard Stainless Steel TR Ø 220 H 1.000 E 8, 18

Electric Bollard Model Plastified Steel Round Cover PEA-541-8mm Electric Bollard Plastified Steel TR Ø 220 H 500 E 8, 18 PEA-741-8mm Electric Bollard Plastified Steel TR Ø 220 H 700 E 8, 18 PEA-141-8mm Electric Bollard Plastified Steel TR Ø 220 H 1.000 E 8,18

Madrid

Police station, Madrid city hall.

18 Automatic Bollards SERIES Ø 168mm

Electric Bollard Model Stainless Steel AISI-316-L Round Cover PEI-571-7mm Electric Bollard Stainless Steel TR Ø 168 H 500 E 7,11 PEI-771-7mm Electric Bollard Stainless Steel TR Ø 168 H 700 E 7,11 PEI-171-7mm Electric Bollard Stainless Steel TR Ø 168 H 1.000 E 7,11

Electric Bollard Model Plastified Steel Round Cover PEA-571-7mm Electric Bollard Plastified Steel TR Ø 168 H 500 E 7,11 PEA-771-7mm Electric Bollard Stainless Steel TR Ø 168 H 700 E 7,11 PEA-171-7mm Electric Bollard Stainless Steel TR Ø168 H 1.000 E 7,11 Autonomic Police Station.

SERIES Ø 141mm

Electric Bollard Model Stainless Steel AISI-316-L Round Cover PEI-531-6mm Electric Bollard Stainless Steel TR Ø 141 H 500 E 6,55 PEI-731-6mm Electric Bollard Stainless Steel TR Ø 141 H 700 E 6,55 PEI-131-6mm Electric Bollard Stainless Steel TR Ø 141 H 1000 E 6,55

Electric Bollard Model Plastified Steel Round Cover PEA-531-6mm Electric Bollard Stainless Steel TR Ø 141 H 500 E 6,55 PEA-731-6mm Electric Bollard Stainless Steel TR Ø 141 H 700 E 6,55 PEA-131-6mm Electric Bollard Stainless Steel TR Ø 141 H1000 E 6,55

SERIESØ 114mm

Electric Bollard Model Stainless Steel AISI-316-L Round Cover PEI-521-8mm Electric Bollard Stainless Steel TR Ø 141 H 500 E 8,56 PEI-721-8mm Electric Bollard Stainless Steel TR Ø 141 H 700 E 8,56 PEI-121-8mm Electric Bollard Stainless Steel TR Ø 141 H 1000 E 8,56

Electric Bollard Model Plastified Steel Round Cover Huesca PEA-521-8mm Electric Bollard Stainless Steel TR Ø 141 H 500 E 8,56 PEA-721-8mm Electric Bollard Stainless Steel TR Ø 141 H 700 E 8,56 PEA-121-8mm Electric Bollard Stainless Steel TR Ø 141 H1000 E 8,56

Villava Nicosia, Cyprus.

Automatic Bollards 19 TOMATICBOLLARDSAUTOM S A U T O M I C B L R D A R D S U T O M I C B L O L A R D S U T M I C B I C B O L A R D S U T M M A T I C B O L R D S U U T O M A I C B L R D S D S A U T O M I C B L R L A R D S U T O M I C B B O L A R D S U T M I C A T I C B O L R D S U M O M A T I C B L R D S U A U T O M I C B L R D S AUTOMATIC ANTITERRORISM BOLLARDS

Presion y Fuerza manufactures antiterrorism security bollards, suitable for providing solutions in the case of the defence sector or vandalism for both restricted and protected access control areas. They are specially designed to support a vehicle collision without deforming the bollard systems.

All anti-terrorism bollards are manufactured in stainless steel AISI-316-L marine anticorrosive and plastified steel, in various diameters of 324mm, 274mm, 220mm, diverse heights of 700mm, 800mm, 1000mm, and 9mm, 12mm or 22mm in thickness. Dwtc-Dubai

As Presion y Fuerza is a manufacturer, its experts can adapt For high security applications, we recommend our well tes- design dimensions of all bollards to the specific require- ted pneumatic, hydraulic or electric systems for the anti-te- ments of the project, always to guarantee best solutions. rrorism bollards.

Bollards are submitted to crash impact tests in order to pro- The construction design is responsible for the strength vide perfect running, additionally put through durability stu- and resistance of the anti-terrorism bollards rather than dies tests. its action mechanisms.

The application of Presion y Fuerza bollards is according to BOLLARDS SUPPLEMENTS requirement demands of high security zones and/or antiterrorism protection, such as in the cases of embassies, mi- Milling and Reflective Band: Double, 32 mm x 1,5 mm nistries, banks, military services, police, high end stores, the Depth, Level 3 retro-reflective malls, commercial areas and a long etc… Lighting: 6 Leds Shield or Logo: Printed shield with laser The Department of Diplomatic Security of the U.S. Depart- Bollards Embellishment: 12 Large Milling ment of State has put to test Presion y Fuerzaʼs antiterro- Flashing Light: Flashing lights by movement rism bollards of level K12 (6,800 kg to 80 kph = 1,695,000 Antifreeze heater: For areas of low temperatures J) vehicle impact resistance of the then specification Gradient for slopes SD.STD-02.01 level K12, now replaced by the corresponding ASTM-F2656-07, and certification BSI-PAS68.

Technical Information Anti-terrorist Bollards

Ø 324mm Ø 274mm Ø 220mm

Bollard Diameter 324mm 274mm 220mm

Standard High Bollard 500, 700,1000mm 500, 700,1000mm 500, 700,1000mm

12,70 mm 12,70 mm 12,70 mm Standard Thickness Bollard 22 mm 22 mm 22 mm

Stainless Steel AISI-316-L , Stainless Steel AISI-316-L , Stainless Steel AISI-316-L , Material Plastified Steel Plastified Steel Plastified Steel

Action Pneumatic Hidraulic Electric Pneumatic Hidraulic Electric Pneumatic Hidraulic Electric

Fall Time (500mm) 3-5 seg. 3-5 seg. 3-5 seg.

Rise Time (500mm) 5-8 seg. 5-8 seg. 5-8 seg.

Equivalent Impact Strength K8 K8 K8

As Presion y Fuerza is a manufacturer, its experts can adapt all products according to the specified requirements of each implementation requirement and clientʼs needs, adapting to different diameters, heights, thickness and utilisation of various materials. 20 Automatic Bollards SERIE PNEUMATIC ANTITERRORIST BOLLARDS Ø 324 mm

Models Pneumatic Anti-terrorist Bollards Stainless Steel AISI-316-L Round Cover PNI-561-12/22mm Pneumatic Bollard Stainless Steel TR Ø 324 H500 E 12/22mm PNI-761-12/22mm Pneumatic Bollard Stainless Steel TR Ø 324 H700 E 12/22mm PNI-161-12/22mm Pneumatic Bollard Stainless Steel TR Ø 324 H1000 E 12/22mm

Models Pneumatic Anti-terrorist Bollards Steel Plastified Round Cover PNA-561-12/22mm Pneumatic Bollard Steel Plastified TR Ø 324 H500 E 12/22mm PNA-761-12/22mm Pneumatic Bollard Steel Plastified TR Ø 324 H700 E 12/22mm PNA-161-12/22mm Pneumatic Bollard Steel Plastified TR Ø 324 H1000 E 12/22mm

SERIE PNEUMATIC ANTITERRORIST BOLLARDS Ø 274 mm

Models Pneumatic Anti-terrorist Bollards Stainless Steel AISI-316-L Round Cover PNI-551-12/22mm Pneumatic Bollard Stainless Steel TR Ø 274 H500 E 12/22mm PNI-751-12/22mm Pneumatic Bollard Stainless Steel TR Ø 274 H700 E 12/22mm PNI-151-12/22mm Pneumatic Bollard Stainless Steel TR Ø 274 H1000 E 12/22mm

Models Pneumatic Anti-terrorist Bollards Steel Plastified Round Cover PNA-551-12/22mm Pneumatic Bollard Steel Plastified TR Ø 274 H500 E 12/22mm PNA-751-12/22mm Pneumatic Bollard Steel Plastified TR Ø 274 H700 E 12/22mm PNI-161-22mm x H1000 mm K12 PNA-151-12/22mm Pneumatic Bollard Steel Plastified TR Ø 274 H1000 E 12/22mm

SERIE PNEUMATIC ANTITERRORIST BOLLARDS Ø 220 mm

Models Pneumatic Anti-terrorist Bollards Stainless Steel AISI-316-L Round Cover PNI-541-12/22mm Pneumatic Bollard Stainless Steel TR Ø 220 H500 E 12/22mm PNI-741-12/22mm Pneumatic Bollard Stainless Steel TR Ø 220 H700 E 12/22mm PNI-141-12/22mm Pneumatic Bollard Stainless Steel TR Ø 220 H100 E 212/22mm

Models Pneumatic Anti-terrorist Bollards Steel Plastified Round Cover PNA-541-12/22mm Pneumatic Bollard Steel Plastified TR Ø 220 H500 E 12/22mm PNA-741-12/22mm Pneumatic Bollard Steel Plastified TR Ø 220 H700 E 12/22mm PNA-141-12/22mm Pneumatic Bollard Steel Plastified TR Ø 220 H1000 E 12/22mm

PNI-741-12mm K8

El Prat de Llobregat Singapore Home Affairs Ministery,

Automatic Bollards 21 A U T O M A T I C B O L L A R D S A U T O M A T I C B O L L A R D S A U T O M A T I C B O L L A R D S A U T O M A T I C B O L L A R D S A U T O M A T I C B O L L A R D S A U T O M A T I C B O L L A R D S A U T O M A T I C B O L L A R D S A U T O M A T I C B O L L A R D S A U T O M A T I C B O L L A R D S A U T O M A T I C B O L L A R D S A U T O M A T I C B O L L A R D S A U T O M A T I C B O L L A R D S A U T O M A T I C B O L L A R D S A U T O M A T I C B O L L A R D S A U TOMATICBOLLARDSAUTOM SECURITY ANTI-CRASH BOLLARDS

Businesses around the world with high security needs rely on the products/services and installations of Presion y Fuerza.

A security bollard of Presion y Fuerza Ø114 mm and 8 mm thickness is capable of absorbing an impact equal to the force of a vehicle of 2,500 kg to 70 km / h.

Tested and certified by TECNUN, Technological Institute of the Superior School of Industrial Engineers from the Uni- versity of Navarra.

A passive security system should be effective. At the same time it should be integrated discreetly and aesthetically in a commercial environment. We bear the same in mind through our innovation and R & D ongoing research.

- Adaptation to corporate or institutional images, logos, shields...

- Various finishes: stainless steel, plasticised steel.

- Internal lighting.

- Easy to operate, minimum maintenance.

Electrical and semiautomatic systems recommended. (pp. 16, pp. 39).

22 Security Bollards Security Bollards 23 TOMATICBOLLARDSAUTOM S A U T O M I C B L R D A R D S U T O M I C B L O L A R D S U T M I C B I C B O L A R D S U T M M A T I C B O L R D S U U T O M A I C B L R D S D S A U T O M I C B L R L A R D S U T O M I C B B O L A R D S U T M I C A T I C B O L R D S U M O M A T I C B L R D S U A U T O M I C B L R D S SUPPLEMENTS FOR BOLLARDS

SUPPLEMENT MILLING AND REFLECTIVE BAND

Supplement of two milling in the superior part of the bollard Teherán - Irán of 32 mm x 1,5 depth, and a yellow retro-reflective band, grade 3 retro-reflective.

SUPPLEMENT LIGHT

Supplement lighting bollards, with a ring plot of 6 leds in the superior part of the bollard, red light.

PNI-541+AFL-242 + PNI-541 + AFR-243 PNI-541 + AFL-242 SUPPLEMENT LARGE MILLING ALF-230 + ALF-230-L + AFR-243 Supplement of 12 large milling to ornament the bollard.

SUPPLEMENT SHIELD OR LOGO

Print shield or logo by laser, in the bollard or upper plate.

PNI-741 + AFL-242 PNI-541 + AGP-240 ALF-230-L SUPPLEMENT OF GRADIENT FOR SLOPES AGP-240 + ALF-230-L + AGE-241

Adjustment bollards to the slopes of the streets

SUPPLEMENTE ADAPTATION TO ANY LOST HOUSING

Adjustment of our technologies to other bollard manufacturers when so required. AGE-241 + PNA-541 + ALF-230-L PNI-541 + AFL-242

ATICBOLLARDSAU B O L A R D S U T M A R D S U T O M I C A U T O M I C B L M A T I C B O L R D S I C B O L A R D S U T L A R D S U T O M D S A U T O M I C B T O M A I C B L R A T I C B O L R D S U B O L A R D S U T M A R D S U T O M I C A U T O M I C B L ALF-230-L REFERENCES SUPPLEMENTS FOR BOLLARDS

Supplements for Bollards

ALF-230-L Supplement Cold Light ALF-230-L Supplement Light Plot 6 Leds ALI-230-I Supplement Flashing Light AAA-231 Anti-Sand Tight Supplement ACH-232 Suppplement Heating 24v And Hygrometer ANSV-233 Pneumatic Supplement Without Vastag ASA-234 Security Supplement Steel Building 22 Cm Thickness ASI-235 Security Supplement Stainless Steel Building 22mm Thickness AGP-240 Building With Gradient For Slopes AGE-24 l Impress Shield Or Logo With Laser AFL-242 Large Milling Bollards AFR-243 Milling And Reflective Band AAC-244 Adjustment To Lost Housing From Other Manufacture PNI-541+AFR-243+ALF-230-L AFN-245 Pneumatic Mechanical Brake Jewellery Security

24 Suplements for bollards FIXING A R D S U T O M I C SA U T O M A I C B L O M A T I C B L R D T I C B O L A R D S U O L A R D S U T M R D S A U T O M I C B A U T O M I C B L O M A T I C B L R D S T I C B O L A R D S U O L A R D S U T M R D S A U T O M I C B A U T O M I C B L O M A T I C B L R D S SUPPLEMENTS

SSA-001

SSA-002 SSA-003 SSA-000 SSA-004

SSA-005

Suplements for bollards 25 ATICBOLLARDSAU B O L A R D S U T M A R D S U T O M I C A U T O M I C B L M A T I C B O L R D S I C B O L A R D S U T L A R D S U T O M D S A U T O M I C B T O M A I C B L R A T I C B O L R D S U B O L A R D S U T M A R D S U T O M I C A U T O M I C B L ELECTRIC CUPBOARDS REFERENCES OF SWITCH CUPBOARDS ATAB-301 Cupboard with Timer AMSM-302-N Cupboard Remote Control Pneumatic Bollards with Loops AMSM-302-E Cupboard Remote Control Electric Bollards with Loops AMSM-302-H Cupboard Remote Control Hydraulic Bollards with Loops AMSM-302-S Cupboard for P. H. and E. in Security Barriers without Loops AMSM-302-TE Cupboard Electronic Remote Control ATEP-303 Cupboard Proximity Cards without Centralization ATEP-303-D Stainless Steel Rectangular Post-Box ATEP-303-1 Post Ø 220 Steel Plastified without Milling ATEP-303-2 Post Ø 220 Stainless Steel without Milling ATEP-304 Cupboard Proximity Cards with Centralization ATEP-304-1 Software Cupboard Communication Optic Fibre and Ethernet ATEP-304-2 Computer Application in Control Centre ATEP-304-10 1000 Mts Ethernet Cable ATEP-304-11 1000 Mts Optic Fibre ATEP-304-20 Maintenance Module Distance Software RTB PAAM-307 Intercom Automatic with Support PAAM-307-IP Intercom Automatic with Support and Communication IP. VPAAM-308 Video Intercom B/N Automatic with Support VPAAM-308-IP Video Intercom B/N Automatic with Support IP SCCV-309 Control System TV MMP-310 Manual Control Distance Button 1 Bollard EFO-310 Button EMERGENCY FAST OPERATION PMT-311 Cards and Commands Manual Programmer MCF-312 Mini-Central Commands 250 Users MCF-313 Maxi-Central Commands 2000 Users SHW-314 Software-Hardware Maxi-Central 2.000 Users PNAEE-315 Pneumatic Cupboard Automatic MML-316 Manual Command Cupboard Keys ALM-317-1 Cupboard Manual Bollards Light 1 Bollard ALM-317-2 Cupboard Manual Bollards Light 2 Bollard ATAB-301 + TANK-10 ALM-317-3 Cupboard Manual Bollards Light 3 Bollard ALM-317-L Cupboard Manual Bollards Light 1-18 Bollard PDG-318 Digital Code and Cupboard

AEI-204 Stainless Steel Cabinet.

AMSM-302+SAMN-15 AMSM-302+SAMN-15 500X450X400 850X650X400 AMSM-302+SAMN-15 550X600X400

26 Electric cupboards REFERENCES OF CUPBOARDS SUPPLEMENTS SSN-200 Supplement Negative Security SSP-201 Supplement Positive Security SRF-202 Supplement Facial Recognition SHD-203 Supplement Fingerprint AEI-204 Supplement Stainless Steel Cupboard SPB-205 Solar panel for bollards SKT-206 Supplement Kit Tropical MMP-310-3x1 SKP-207 Supplement Kit Polar ALM-208 Supplement Car-Plate Reader TAG-209 Tag Reader – 16 Mts TAG-210 TAG CARD 2.45ghz, 3,5mm THICKNESS TAG-211 Tag Card Coding AMTM-212 Supplement GSM ARFM-213 Supplement Radio Frequency ATBM-214 Supplement Cupboard Magnetic Band Cards AES-236 In-Out Entrance Supplement MMP-310-3x4 + EFO AAS-237 Supplement Sonorous Alarm ASL-238 Traffic Light 2 Colours 200 mm 24V AFAS-239 Supplement Power Supply 24V Traffic Light AFA-244 Supplement Milling Proximity Post ALP-245 Supplement Proximity Reader 24v Traffic Light AEP-246 Supplement EPROM Programme MMP-310-5x1 CCS-247 Supplement Security Closer Cupboard ASP-248 Supplement Post Traffic Light AFA-249 Supplement Power Supply Electric Bollard Added SAI-250 System of interrupted feed UPS-251 Uninterruptible Power Supply TARJ-402 Remote Control TARJ-403 Proximity Card MMP-310-1x4 TARJ-404 Magnetic Band Card TARJ-405 Printing Cards and Remote Controls TROPICAL KIT AND Special supplements for bollards

POLAR KIT A U T O M I C B L R D S O M A T I C B L R D S U T I C B O L A R D S U M O L A R D S U T M I C B R D S A U T O M I C B L A U T O M I C B L R D S O M A T I C B L R D S U T I C B O L A R D S U M O L A R D S U T M I C B R D S A U T O M I C B L A U T O M I C B L R D S O M A T I C B L R D S U TICBOLLARDSAUTOMATICB TROPICAL KIT REF.: STK-100 STK-100-A Supplement Tightness of Leds 120ºC STK-100-B Supplement Cupboard Refrigeration STK-100-C Supplement Purge of Air-Tanks STK-100-D Supplement Strength in Connection Boxes and Covers

POLAR KIT REF.: STK-101 STK-101-A Supplement Heating Bollards STK-101-B Supplement Heating Cupboards STK-101-C Supplement Heating Pipes

STK-100-C STK-100-B

Electric cupboards 27 MML-316 ASL-238 PDG-318 VPAAM-308

Entry and Exit with proximity cards(Tolosa)

Only Entry with proximity cards (Ponferrada)

28 Security in control access SECURITY IN CONTROL

ACCESS A U T O M I C B L R D S O M A T I C B L R D S U A T I C B O L R D S U M C B O L A R D S U T M I O L A R D S U T M I C B A R D S U T O M I C B L S A U T O M I C B L R D T O M A I C B L R D S U M A T I C B O L R D S U T I C B O L A R D S U M B O L A R D S U T M I C L A R D S U T O M I C B DSAUTOMATICBOLLARDSA

ATEP-301-1 ATEP-303-1 ATEP-303-2 ATEP-303-2 + ASL-238 + PAAM-307 + PAAM-307

The switch cupboards of Presion y Fuerza are manufactured with the userʼs protection in mind, in case of any mistake in the system (positive security) or protecting high-security areas, restricted zones and not permitting any possible manipulation attempts by strangers, (negative security).

POSITIVE SECURITY

In case of outage, a technical fault in a damaged compo- nent, cut in the inductive loops, a mistake in the inductive loops or any malfunctioning of the system, the bollard would pop down allowing the access without any obstacles. VARIANTS This kind of security is included in all PNEUMATIC BO- LLARDS AND HYDRAULIC BOLLARDS. Regardless of the same, each bollard has a security included; this measure can change depending on the specific requirements of each access. Therefore two versions exist: NEGATIVE SECURITY 1.To add a security negative supplement SSN-200 in In case of outage, a technical fault in a damaged compo- the case of Pneumatic Bollards or Hydraulic Bo- nent, cut in the inductive loops, a mistake in the inductive llards. Positive security SSP-201 supplement in the loops or any malfunctioning of the system, the bollard would case of Electric Bollards. automatically block at popped up (in defence position) avoiding all vehicles access. 2.To add a supplementary mechanism SAI-300 This kind of security is included in all ELECTRIC BO- (System of interrupted feed) or UPS- 301 (Uninte- LLARDS. This safety measure is applied where total res- rruptible Power supply) through a battery providing tricted access of vehicles to the site in an emergency energy to every point of connection of the power situation would be required. supply chain.

Security in control access 29 TOMATICBOLLARDSAUTOM S A U T O M I C B L R D A R D S U T O M I C B L O L A R D S U T M I C B I C B O L A R D S U T M M A T I C B O L R D S U U T O M A I C B L R D S D S A U T O M I C B L R L A R D S U T O M I C B B O L A R D S U T M I C A T I C B O L R D S U M O M A T I C B L R D S U A U T O M I C B L R D S DETECTION SYSTEM FOR VEHICLES

Control Centre

A2 B2 B1 Presence loop or automated exit

A1 Security loop

Access options Four control loops to the best security

- Entrance or exit controlled (one way direction) - A1 and A2, presence loops, detect a vehicle pre- - Controlled entrance and automated exit (two way di- sence and allow the use of magnetic cards and re- rection) mote control. - Entrance and exit controlled (two way direction) - B1 and B2, security loops that avoid the pop-up of the bollards during vehicle presence.

OPERATIONS physically over the security loops. Immediately after passage of the vehicle, the bollard will rise, automatically timed. 1. - ENTRANCE OR EXIT CONTROLLED (ONE WAY) If the vehicle is physically on the presence loop from the exit direction, it follows the same manoeuvre in the opposite di- Possibility of access in one direction (input or output). The rection. vehicle must be physically on the presence loop, its presence drives the pop-down signal allowing passage through the security loops. Immediately after the passage of the ve- 3. - ENTRANCE CONTROLLED AND AUTOMATIC EXIT hicle, the bollard will rise automatically timed. Possibility of access in both directions (entry/exit at the same access). The vehicle must be physically on the pre- 2. - ENTRANCE AND EXIT CONTROLLED (TWO WAY) sence loop, turning on the pop-down signal, and continue over the security loops. Immediately, the bollard will rise, au- Possibility of access in both directions (entry/exit from the tomatically timed. If the vehicle is on the presence loop from same access). The vehicle must be physically on the pre- the exit direction, the bollard will pop-down automatically wi- sence loop, which turns on the pop-down signal, continuing thout having to switch on any signal.

30 Detection System for vehicles Loop system for regulated Loop system for automatic entrance and automatic exit entrance and regulated exit

Loop system for entrance only or exit only

Detection System for vehicles 31 ATICBOLLARDSAU B O L A R D S U T M A R D S U T O M I C A U T O M I C B L M A T I C B O L R D S I C B O L A R D S U T L A R D S U T O M D S A U T O M I C B T O M A I C B L R A T I C B O L R D S U B O L A R D S U T M A R D S U T O M I C A U T O M I C B L CONTROL CENTRE ALFA SOFTWARE

Automatic program schedule Alarms Comunication Control.

Reports Schedule management.

Traffic light control. Groups management.

32 Software Control Centre 1 Control Centre 2 Control Centre 3

TARJ-402 Remote Control TARJ-403 Proximity Card

AlM-208 Car Plate Reader SHD-203 Fingerprint Reader GSM

Drive System

Remote Control Ideal for up to 500 users authorised permanent free access.

Works well for up to 20,000 users, controlling their entries only on those days and Proximity Card hours specified in the technologies.

All registered mobile phones SMS messages are programmed to start the system, permitting the pop- Mobile Phone (GSM) up or pop-down of bollards, as desired.

All operations, including different installations can be coordinated from a single Control Centre integra- Integrated Control Centre ted with the software provided by Presión y Fuerza: Communication ADSL, GSM, RT, GPRS, F.O., pro- (Alfa Software) fibus.

Manual Drive The switch cupboards are equipped by a priority drive manual selector.

Scheduled Operator In every configuration, we can programme up to 12 different schedules per week.

Electricity Outage In such cases, bollards go down automatically to allow entry of all vehicles.

Allows the popping down of bollards through quick and accurate fingerprint identification, in 1 second. Fingerprint Easy installation and connection. It includes keyboard and card reader.

Compact camera system with parameter remote and LED lighting, natural day and infrared night, that Car-Plate Reader allows a cyclical variation of the currents synchronized with the camera. The camera is fixed to floor, wall, ceiling, tripod or vehicle. Hermetically sealed housing.

Software 33 MATICBOLLARDSAUTOMAT U T O M A I C B L R D S D S A U T O M I C B L R L A R D S U T O M I C B B O L A R D S U T M I C A T I C B O L R D S U M T O M A I C B L R D S U S A U T O M I C B L R D A R D S U T O M I C B L O L A R D S U T M I C B T I C B O L A R D S U M O M A T I C B L R D S U A U T O M I C B L R D S POWER FEEDING SYSTEMS

PNEUMATIC CENTRAL

REF. SAMN-15 1-2 Bollards REF. SAMN-25 3-4 Bollards REF. SAMN-35 5-6 Bollards REF. SAMN-45 7-8 Bollards REF. SAMN-55 9-10 Bollards REF: VCC-11 Supplement valves for factory with compressors

Technical Index Switch Cupboard for Pneumatic Bollards Air compressor Dry piston - Oil less Voltage 220V Monofase Frequency 50Hz Intensity 2,5 Amp. Protection IP 54 Power 830 W Flow 90 L / min. Work frequency 20.000 operations per day, Intensity Use Running Temperature (-40ºC + 70ºC) Directional valve 24V, 2 units x 3 / 2, 0,45 A Discharge valve 220V 53 mA Automatic going down in case of electric failure Always Work pressure 0-7 bar Presostate Regulation of pressure max. and min.

OPTIONS

REF. TANK 20 Air tank: 6L - 12L + Valves box REF. CLBX-501-503 Connection box + Cover: 560 x 560 x 1020 REF. SSP-201 Positive Security: Not increases in case of failure REF. SSN-200 Negative Security: Not falls in case of failure REF. ATS-210 Tanks cabinets

SAMN-15 ATS- 210 CLBX-501

34 Power feeding systems POWER SUPPLY

REF. AFA-249 Each Bollards

Technical Index Switch Cupboard For Electric Bollards Motor Electric actuator Voltage 24 V - CC Load 7500N Intensity 10 A Protection IP 67 Work frequency 100 operations per day, Intensity Use Running Temperature (-20ºC + 50ºC)

HYDRAULIC CENTRAL

REF. SAMH-220 Each bollards AFA-249 REF. SAMH-24 Each bollards

Technical Index Switch Cupboard For Hydraulic Bollards Oil pump Gear pump Voltage 220V Monofase 24 V CC Flow 10 L / min. 10 L / min. Work pressure / max 0 / 50 Bar 0 / 50 Bar Power 0,5 c.v. 800 watts Frequency 50 Hz Intensity 4 Amp. 35 A Protection IP 54 Work frequency 10.000 operations per day, Intensity Use Running Temperature (-40ºC + 70ºC) Directional valve 24V 12W 1,9 A Automatic going down in case of electric failure Always Pressure limiter Regulation of pressure max. and min. Electrovalvule position regulation 5 / 3 open points

SAMH-24 SAMH-220

Power feeding systems 35 OLLARDSAUTOMA R D S A U T O M I C B A U T O M I C B L O M A T I C B L R D S T I C B O L A R D S U O L A R D S U T M R D S A U T O M I C B A U T O M I C B L O M A T I C B L R D S T I C B O L A R D S U O L A R D S U T M R D S A U T O M I C B A U T O M I C B L INSTALLATION SWITCH CUPBOARD

1 2

3 4

5 6

7 8

36 Installation bollards 9 10

11 12

13 14

15 16

Installation bollards 37 TOMATICBOLLARDSAUTOM S A U T O M I C B L R D A R D S U T O M I C B L O L A R D S U T M I C B I C B O L A R D S U T M M A T I C B O L R D S U U T O M A I C B L R D S D S A U T O M I C B L R L A R D S U T O M I C B B O L A R D S U T M I C A T I C B O L R D S U M O M A T I C B L R D S U A U T O M I C B L R D S INSTALLATION SWITCH CUPBOARD

1 2

3 4

5 6

38 Installation bollards 1 4

2 5

3 6

Trench dimensions for a row of 3 bollards, 700mm high.

Installation bollards 39

SEMIAUTOMATIC

APPLICATION Presion y Fuerza Factory. • Applications for few users as the operation is manual.

• Recommended for anti-vandalism security at high end stores such as jewellery sector, commercial outlets and offices etc. These bollards are a perfect solution for height protection, as they are specially DESCRIPTION designed to support a vehicle impact without deforming the systems. • Bollard pop-up through a nitrogen actuator and goes down by manual action (with the foot). OPTIONS • Operates with a manual key. Pops up automatically through the turn of a key, and pops down by Retro-reflective bande: Double, 32 mm x 1,5 mm deep. hand/foot applied pressure. Grade 3 Lighting: 6 Leds - Recommended for 15-20 actions per day. Shield or Logo: Printed shield or logo by laser in bollard or plated • Series Ø 324mm / Ø 274mm / Ø 220mm / Ø 168mm Beautification of the bollard: 12 Large milling / Ø 141mm / Ø 114mm Flashing Light: Flashing lights by movement Antifreeze heater: For areas of low temperatures • Storm-water drainage is necessary. Gradient for slopes

Technical Index Semiautomatic Bollards

Diameter Bollard 324 mm / 274 mm / 220 mm / 168 mm / 141 mm / 114 mm

High Bollard 500 mm, 700 mm y 1000 mm

Thickness Bollard 9,53mm / 9,27mm / 8,56mm / 8,18mm / 6,55mm / 6mm

Material Stainless Steel AISI-316-L Anticorrosive Marine / Steel plastified

Running Semiautomatic - Manual (Gas spring)

Down time Manual pressure Almeria Goverment.

Up time 5-9 seg.

Equivalent Impact Strength K-8 L-1 – 1.000.000 JULES

Semiautomatic bollards 41 MATICBOLLARDS C B O L A R D S U T L A R D S U T O M I S A U T O M I C B L O M A T I C B L R D I C B O L A R D S U T L A R D S U T O M D S A U T O M I C B T O M A I C B L R A T I C B O L R D S U B O L A R D S U T M A R D S U T O M I C A U T O M I C B L REFERENCES SERIE Ø 324mm

SEMIAUTOMA- Semiautomatic Bollards Stainless Steel Aisi-316-L Round Cover TIC BOLLARDS PSI-561-9mm Semiautomatic Bollard Stainless Steel TR Ø 324 H 500 E 9,53 PSI-761-9mm Semiautomatic Bollard Stainless Steel TR Ø 324 H 700 E 9,53 PSI-161-9mm Semiautomatic Bollard Stainless Steel TR Ø 324 H 1.000 E 9,53

Semiautomatic Bollards Steel Plastified Round Cover PSA-561-9mm Semiautomatic Bollard Steel Plastified TR Ø 324 H 500 E 9,53 PSA-761-9mm Semiautomatic Bollard Steel Plastified TR Ø 324 H 700 E 9,53 PSA-161-9mm Semiautomatic Bollard Steel Plastified TR Ø 324 H 1.000 E 9,53

SERIE Ø 274mm

Semiautomatic Bollards Stainless Steel Aisi-316-L Round Cover PSI-551-9mm Semiautomatic Bollard Stainless Steel TR Ø 274 H 500 E 9,27 PSI-751-9mm Semiautomatic Bollard Stainless Steel TR Ø 274 H 700 E 9,27 PSI-151-9mm Semiautomatic Bollard Stainless Steel TR Ø 274 H 1.000 E 9,27

Semiautomatic Bollards Steel Plastified Round Cover Alfajeria Castle, Spain PSA-551-9mm Semiautomatic Bollard Steel Plastified TR Ø 274 H 500 E 9,27 PSA-751-9mm Semiautomatic Bollard Steel Plastified TR Ø 274 H 700 E 9,27 PSA-151-9mm Semiautomatic Bollard Steel Plastified TR Ø 274 H 1.000 E 9,27

SERIE Ø 220mm

Semiautomatic Bollards Stainless Steel Aisi-316-L Round Cover PSI-541-8mm Semiautomatic Bollard Stainless Steel TR Ø 220 H 500 E 8,18 PSI-741-8mm Semiautomatic Bollard Stainless Steel TR Ø 220 H 700 E 8,18 PSI-141-8mm Semiautomatic Bollard Stainless Steel TR Ø 220 H 1.000 E 8,18

Semiautomatic Bollards Steel Plastified Round Cover PSA-541-8mm Semiautomatic Bollard Steel Plastified TR Ø 220 H 500 E 8,18 PSA-741-8mm Semiautomatic Bollard Steel Plastified TR Ø 220 H 700 E 8,18 PSA-141-8mm Semiautomatic Bollard Steel Plastified TR Ø 220 H 1.000 E 8,18

42 Semiautomatic bollards SERIE Ø 141mm

Semiautomatic Bollards Stainless Steel Aisi-316-L Round Cover PSI-531-6mm Semiautomatic Bollard Stainless Steel TR Ø 141 H 500 E 6,55 PSI-731-6mm Semiautomatic Bollard Stainless Steel TR Ø 141 H 700 E 6,55 PSI-131-6mm Semiautomatic Bollard Stainless Steel TR Ø 141 H 1.000 E 6,55

Semiautomatic Bollards Steel Plastified Round Cover PSA-531-6mm Semiautomatic Bollard Steel Plastified TR Ø 141 H 500 E 6,55 PSA-731-6mm Semiautomatic Bollard Steel Plastified TR Ø 141 H 700 E 6,55 PSA-131-6mm Semiautomatic Bollard Steel Plastified TR Ø 220 H 1.000 E 6,55

SERIE Ø 114mm

Semiautomatic Bollards Stainless Steel Aisi-316-L Round Cover PSI-521-8mm Semiautomatic Bollard Stainless Steel TR Ø 114 H 500 E 8,56 Limpias Grand Hotel. PSI-721-8mm Semiautomatic Bollard Stainless Steel TR Ø 114 H 700 E 8,56 PSI-141-8mm Semiautomatic Bollard Stainless Steel TR Ø 114 H 1.000 E 8,56 PSI-521-6mm Semiautomatic Bollard Stainless Steel TR Ø 114 H 500 E 6,02 PSI-721-6mm Semiautomatic Bollard Stainless Steel TR Ø 114 H 700 E 6,02 PSI-141-6mm Semiautomatic Bollard Stainless Steel TR Ø 114 H 1.000 E 6,02 PSI-521-4mm Semiautomatic Bollard Stainless Steel TR Ø 114 H 500 E 4 PSI-721-4mm Semiautomatic Bollard Stainless Steel TR Ø 114 H 700 E 4 PSI-141-4mm Semiautomatic Bollard Stainless Steel TR Ø 114 H 1.000 E 4

Semiautomatic Bollards Steel Plastified Round Cover PSA-521-8mm Semiautomatic Bollard Steel Plastified TR Ø 114 H 500 E 8,56 PSA-721-8mm Semiautomatic Bollard Steel Plastified TR Ø 114 H 700 E 8,56 PSA-121-8mm Semiautomatic Bollard Steel Plastified TR Ø 114 H 1.000 E 8,56 PSA-521-6mm Semiautomatic Bollard Steel Plastified TR Ø 114 H 500 E 6,02 PSA-721-6mm Semiautomatic Bollard Steel Plastified TR Ø 114 H 700 E 6,02 PSA-121-6mm Semiautomatic Bollard Steel Plastified TR Ø 114 H 1.000 E 6,02 PSA-521-4mm Semiautomatic Bollard Steel Plastified TR Ø 114 H 500 E 4 PSA-721-4mm Semiautomatic Bollard Steel Plastified TR Ø 114 H 700 E 4 PSA-121-4mm Semiautomatic Bollard Steel Plastified TR Ø 114 H 1.000 E 4

Semiautomatic bollards 43

EXTRACTABLE

Reus

Recommended for 1 - 5 cycles per week. Series Ø 324mm / Ø 274mm / Ø 220mm / 168mm / Ø 141mm / Ø 114mm / Ø 90mm

DESCRIPTION

• Bollards with an extractable base (fixed in the ground at time of civil works) and a tape to cover the base in order to allow transit when bollard is remo- ved.

• Operates with the above described manual key.

APPLICATION

• Applications for few users as this bollard model is designed to be operated manually.

• Recommended for anti-vandalism security at jewellery and high-end stores, commercial outlets and shops in general. These bollards are a perfect solution for height protection, because they are specially designed to support a vehicle impact without deforming the systems.

New powder coating plastic OPTIONS Texture, Ral 7016

Retro-reflective band: Double, 32 mm x 1,5 mm deep Grade 3 retro-reflective Lighting: 6 Leds Shield or Logo: Printed shield or logo by laser in bollard or plate Beautification of the bollard: 12 Large milling

Technical Information Extractable Bollards

Diameter Bollard 324 mm / 274 mm / 220 mm / 168 mm / 141 mm / 114 mm / 90 mm

High Bollard 500 mm, 700 mm y 1000 mm

Thickness Bollard 8,56mm / 8,18mm / 6,55mm / 6mm

Material Stainless Steel AISI-316-L Anticorrosive Marine / Steel plastified

Running Manual (with key)

Extractable bollards 45 AUTOMATICBOLL M A T I C B O L R D S B O L A R D S U T A R D S U T O M I C A U T O M I C B L M A T I C B O L R D S B O L A R D S U T A R D S U T O M I C A U T O M I C B L M A T I C B O L R D S B O L A R D S U T A R D S U T O M I C A U T O M I C B L REFERENCES SERIE Ø 220mm

EXTRACTABLE Extractable Bollards Stainless Steel Aisi-316-L Round Cover BOLLARDS PEXI-541-8mm Extractable Bollard Stainless Steel TR Ø 220 H 500 E 8,18 PEXI -741-8mm Extractable Bollard Stainless Steel TR Ø 220 H 700 E 8,18 PEXI -141-8mm Extractable Bollard Stainless Steel TR Ø 220 H 1.000 E 8,18

Extractable Bollards Steel Plastified Round Cover PEXA-541-8mm Extractable Bollard Steel Plastified TR Ø 220 H 500 E 8,18 PEXA-741-8mm Extractable Bollard Steel Plastified TR Ø 220 H 700 E 8,18 PEXA-141-8mm Extractable Bollard Steel Plastified TR Ø 220 H 1.000 E 8,18

SERIE Ø 141mm

Extractable Bollards Stainless Steel Aisi-316-L Round Cover PEXI -531-6mm Extractable Bollard Stainless Steel TR Ø 141 H 500 E 6,55 PEXI -731-6mm Extractable Bollard Stainless Steel TR Ø 141 H 700 E 6,55 PEXI -131-6mm Extractable Bollard Stainless Steel TR Ø 141 H 1.000 E 6,55

Extractable Bollards Steel Plastified Round Cover PEXA-531-6mm Extractable Bollard Steel Plastified TR Ø 141 H 500 E 6,55 PEXA-731-6mm Extractable Bollard Steel Plastified TR Ø 141 H 700 E 6,55 PEXA-131-6mm Extractable Bollard Steel Plastified TR Ø 141 H 1.000 E 6,55

SERIE Ø 114mm

Extractable Bollards Stainless Steel Aisi-316-L Round Cover PEXI -521-8mm Extractable Bollard Stainless Steel TR Ø 114 H 500 E 8,56 PEXI -721-8mm Extractable Bollard Stainless Steel TR Ø 114 H 700 E 8,56 PEXI -121-8mm Extractable Bollard Stainless Steel TR Ø 114 H 1.000 E 8,56 PEXI -522-6mm Extractable Bollard Stainless Steel TR Ø 114 H 500 E 6,02 PEXI -722-6mm Extractable Bollard Stainless Steel TR Ø 114 H 700 E 6,02 PEXI -122-6mm Extractable Bollard Stainless Steel TR Ø 114 H 1.000 E 6,02 PEXI -521-4mm Extractable Bollard Stainless Steel TR Ø 114 H 500 E 4 PEXI -721-4mm Extractable Bollard Stainless Steel TR Ø 114 H 700 E 4 PEXI -121-4mm Extractable Bollard Stainless Steel TR Ø 114 H 1.000 E 4

Extractable Bollards Steel Plastified Round Cover PEXA-521-8mm Extractable Bollard Steel Plastified TR Ø 114 H 500 E 8,56 PEXA-721-8mm Extractable Bollard Steel Plastified TR Ø 114 H 700 E 8,56 PEXA-121-8mm Extractable Bollard Steel Plastified TR Ø 114 H 1.000 E 8,56 PEXA-522-6mm Extractable Bollard Steel Plastified TR Ø 114 H 500 E 6,02 PEXA-722-6mm Extractable Bollard Steel Plastified TR Ø 114 H 700 E 6,02 PEXA-122-6mm Extractable Bollard Steel Plastified TR Ø 114 H 1.000 E 6,02 PEXA-521-4mm Extractable Bollard Steel Plastified TR Ø 114 H 500 E 4 PEXA-721-4mm Extractable Bollard Steel Plastified TR Ø 114 H 700 E 4 PEXA-121-4mm Extractable Bollard Steel Plastified TR Ø 114 H 1.000 E 4

SERIE Ø 90mm

Extractable Bollards Stainless Steel Aisi-316-L Round Cover PEXI -511-6mm Extractable Bollard Stainless Steel TR Ø 90 H 500 E 5,49 PEXI -711-6mm Extractable Bollard Stainless Steel TR Ø 90 H 700 E 5,49 PEXI -111-6mm Extractable Bollard Stainless Steel TR Ø 90 H 1.000 E 5,49

Extractable Bollards Steel Plastified Round Cover PEXA-511-6mm Extractable Bollard Steel Plastified TR Ø 90 H 500 E 5,49 PEXA-711-6mm Extractable Bollard Steel Plastified TR Ø 90 H 700 E 5,49 PEXA-111-6mm Extractable Bollard Steel Plastified TR Ø 90 H 1.000 E 5,49 New Elastomeric Polymer Extractable Bollards

46 Extractable bollards CAST STEEL – EXTRACTABLE BOLLARDS OTHER

Type Of Extractable Bollards Of Cast Steel EXTRACTABLE

BEA-100 Extractable Base Type A BOLLARDS A U T O M I C B L A R D S U T O M I C B O L A R D S U T M A T I C B O L R D S U T O M A I C B L R D S A U T O M I C B O L A R D S U T M A T I C B O L R D S U T O M A I C B L R D S A U T O M I C B O L A R D S U T M A T I C B O L R D S UTOMATICBOLLA PE-111 Extractable Bollard Cast Steel Barcelona-92 Ø100 X H 900

Type Of Extractable Bollards Of Cast Steel BEA-101 Extractable Base Type B PE-110 Extractable Bollard Cast Steel Via Julia Pequeña Ø120 X H 600 PE-112 Extractable Bollard Cast Steel Via Julia Grande Ø250 X H 500 PE-113 Extractable Bollard Cast Steel Via Gerona Ø300 X H 300 PE-114 Extractable Bollard Cast Steel Valencia Antigua Pequeña PE-115 Extractable Bollard Cast Steel Valencia Antigua Grande

Type Of Extractable Bollards Of Cast Steel BEFX-120 Extractable Base Type Cast Steel PEFX-121 Extractable Bollard Cast Steel Habana Ø114 X H 500

OTHER EXTRACTABLE BOLLARDS

Othe Type Of Extractable Bollards BEC-130 Extractable Base Type Square PE-131 Extractable Bollard Galvanized Square Ø70 X H 1.000 LLAVE-132 Bollard Key

Because we are manufacturers, we can adapt our products according to the special requirements of every implementation, with differents diameters, heights, thickness and materials. So depending on the security needed, we can adapt the thickness up to 3, 4, 5, 6, 12, 22 mm

All the bollards of Presión y Fuerza comply with trade CE and UL.

Extractable bollards 47 TOMATICBOLLARDSAUTOM S A U T O M I C B L R D A R D S U T O M I C B L O L A R D S U T M I C B I C B O L A R D S U T M M A T I C B O L R D S U U T O M A I C B L R D S D S A U T O M I C B L R L A R D S U T O M I C B B O L A R D S U T M I C A T I C B O L R D S U M O M A T I C B L R D S U A U T O M I C B L R D S OPEN SYSTEM FOR BOLLARDS

Open System for Semiautomatic and Extractable Bollards

Automatic and extractable bollards use a security antivandalic key, only made by Pre- sion y Fuerza, that it avoids the possible manipulation or theft of bollards.

There are 2 security keys.

Customer design Star security key

The star security key allows the opening of the anchor latch of a semiautomatic or extractable bollard.

In case of a semiautomatic bollard, it is necessary to turn the key and the bollard goes up by a gas actuator as elevation equipment. To go down the bollard you turn once again the key, you press the bollard and the bollard be anchored by the key action.

In case of an extractable bollard, you turn the key and you take out the bollard from the base because the anchor latch of the upper side will be free by the key.

The star security key allows as well the opening of the screws from the external plate of the bollard.

Star security bangle key

The star security bangle key allows the anchor latch opening of semiautomatic and extractable bollards and it avoids that users could take out the key leaving the bollard in lower position, allowing the free access. In this case, the user must raise again the bollard in order to retrieve the key. Star security key to drive the bollards and open screw Other keys:

Large triangular security key

Large triangular security key to open special bollards manually

Screws and key personalized

Star security bangle key to All screws and keys of Presion y Fuerza equipments are own made, they are manufactured drive the bollards and in stainless steel AISI-316-L anticorrosive marine and for height security antivandalic. open screw There is a possibility to personalize the screws and keys shape in order to increase the in- violability.

48 Extractable bollards RUNNING OF MOBILE BOLLARDS A U T O M I C B L R D S O M A T I C B L R D S U A T I C B O L R D S U M B O L A R D S U T M I C L A R D S U T O M I C B D S A U T O M I C B L R U T O M A I C B L R D S M A T I C B O L R D S U I C B O L A R D S U T M O L A R D S U T M I C B A R D S U T O M I C B L S A U T O M I C B L R D TOMATICBOLLARDSAUTOM

Runing of extractable Bollards

STEP Nº 1: Turn the STEP Nº 2: Take out the STEP Nº 3: Put the lock-release key 90º. bollard. cover to allow transit.

Runing of semiautomatic Bollards

STEP Nº 1: Turn the lock- STEP Nº 2: Tread the bo- STEP Nº 3: The bollard is release key 90º leaving llard and press slightly. locked down automatic, free the latch. allowing transit.

STEP Nº 4: Turn the lock- STEP Nº 5: The bollard STEP Nº 6: The bollard is release key 90º leaving goes up automatic by a locked up automatic, free the latch. gas spring effect. avoiding transit.

Extractable bollards 49

FIX

Pamplona

Recommended for applications where in any case is necessary to move the bollard.

Advisable to complete the automatic bollards access.

Serie Ø 324mm / Ø 274mm / Ø 220mm / Ø 168mm / Ø 141mm / Ø 114mm / Ø 90mm

DESCRIPTION

• Bollard joined to the ground and fixed with concrete. Hipercor. Alcalá de Henares • Any possibility of movement.

APPLICATION

• For applications where in any case is necessary to take out the bollard, because this bollard is fixed with concrete to the ground avoiding the access everytime.

OPTIONS

Retro-reflective bande: Doble, 32 mm x 1,5 mm deep Grade 3 Shield or Logo: Printed shield or logo by laser in bollard or plate Beautification of the bollard: 12 Large milling 4 Torres. Madrid

Technical Index Fix Bollards

Diameter Bollard 324 mm / 274 mm / 220 mm / 168 mm / 141 mm / 114 mm / 90 mm

High Bollard 500 mm, 700 mm y 1000 mm

Thickness Bollard 9,53mm / 9,27mm / 8,56mm / 8,18mm / 6,55mm / 6mm

Material Stainless Steel AISI-316-L Anticorrosive Marine / Steel plastified

Fix bollards 51 MATICBOLLARDS C B O L A R D S U T L A R D S U T O M I S A U T O M I C B L O M A T I C B L R D I C B O L A R D S U T L A R D S U T O M D S A U T O M I C B T O M A I C B L R A T I C B O L R D S U B O L A R D S U T M A R D S U T O M I C A U T O M I C B L REFERENCES SERIE Ø 324mm

FIX BOLLARDS Fix Bollards Stainless Steel Aisi-316-L PFI-561-9mm Fix Bollard Stainless Steel TR Ø 324 H 500 E 9,53 PFI-761-9mm Fix Bollard Stainless Steel TR Ø 324 H 700 E 9,53 PFI-161-9mm Fix Bollard Stainless Steel TR Ø 324 H 1.000 E 9,53

Fix Bollards Steel Plastified PFA-561-9mm Fix Bollard Steel Plastified TR Ø 324 H 500 E 9,53 PFA-761-9mm Fix Bollard Steel Plastified TR Ø 324 H 700 E 9,53 PFA-161-9mm Fix Bollard Steel Plastified TR Ø 324 H 1.000 E 9,53

SERIE Ø 274mm

Fix Bollards Stainless Steel Aisi-316-L PFI-551-9mm Fix Bollard Stainless Steel TR Ø 274 H 500 E 9,27 PFI-751-9mm Fix Bollard Stainless Steel TR Ø 274 H 700 E 9,27 PFI-151-9mm Fix Bollard Stainless Steel TR Ø 274 H 1.000 E 9,27

Fix Bollards Steel Plastified PFA-551-9mm Fix Bollard Steel Plastified TR Ø 274 H 500 E 9,27 PFA-751-9mm Fix Bollard Steel Plastified TR Ø 274 H 700 E 9,27 PFA-151-9mm Fix Bollard Steel Plastified TR Ø 274 H 1.000 E 9,27

SERIE Ø 220mm

Fix Bollards Stainless Steel Aisi-316-L PFI-541-8mm Fix Bollard Stainless Steel TR Ø 220 H 500 E 8,18 PFI-741-8mm Fix Bollard Stainless Steel TR Ø 220 H 700 E 8,18 PFI-141-8mm Fix Bollard Stainless Steel TR Ø 220 H 1.000 E 8,18

Fix Bollards Steel Plastified PFA-541-8mm Fix Bollard Steel Plastified TR Ø 220 H 500 E 8,18 PFA-741-8mm Fix Bollard Steel Plastified TR Ø 220 H 700 E 8,18 PFA-141-8mm Fix Bollard Steel Plastified TR Ø 220 H 1.000 E 8,18

SERIE Ø 141mm

Fix Bollards Stainless Steel Aisi-316-L PFI-531-6mm Fix Bollard Stainless Steel TR Ø 141 H 500 E 6,55 PFI-731-6mm Fix Bollard Stainless Steel TR Ø 141 H 700 E 6,55 PFI-131-6mm Fix Bollard Stainless Steel TR Ø 141 H 1.000 E 6,55

Fix Bollards Steel Plastified PFA-531-6mm Fix Bollard Steel Plastified TR Ø 141 H 500 E 6,55 PFA-731-6mm Fix Bollard Steel Plastified TR Ø 141 H 700 E 6,55 PFA-131-6mm Fix Bollard Steel Plastified TR Ø 141 H 1.000 E 6,55

SERIE Ø 114mm

Fix Bollards Stainless Steel Aisi-316-L PFI-521-8mm Fix Bollard Stainless Steel TR Ø 114 H 500 E 8,56 PFI-721-8mm Fix Bollard Stainless Steel TR Ø 114 H 700 E 8,56 PFI-121-8mm Fix Bollard Stainless Steel TR Ø 114 H 1.000 E 8,56

Fix Bollards Steel Plastified PFA-521-8mm Fix Bollard Steel Plastified TR Ø 114 H 500 E 8,56 PFA-721-8mm Fix Bollard Steel Plastified TR Ø 114 H 700 E 8,56 PFA-121-8mm Fix Bollard Steel Plastified TR Ø 114 H 1.000 E 8,56

52 Fix bollards SERIE Ø 90mm

Fix Bollards Stainless Steel Aisi-316-L As Presion y Fuerza is a PFI-511-6mm Fix Bollard Stainless Steel TR Ø 90 H 500 E 5,49 manufacturer, it experts can PFI-711-6mm Fix Bollard Stainless Steel TR Ø 90 H 700 E 5,49 adapt its products accor- PFI-111-6mm Fix Bollard Stainless Steel TR Ø 90 H 1.000 E 5,49 ding to the special requirements for implementation Fix Bollards Steel Plastified and client needs, with diffe- PFA-511-6mm Fix Bollard Steel Plastified TR Ø 90 H 500 E 5,49 rent diameters, heights, PFA-711-6mm Fix Bollard Steel Plastified TR Ø 90 H 700 E 5,49 thickness and materials. PFA-111-6mm Fix Bollard Steel Plastified TR Ø 90 H 1000 E 5,49 Therefore, depending on the security needs, we can adapt thickness from 3, 4, 5, 6, 12, up to 22 mm.

FIX BOLLARDS CAST STEEL OTHER FIX Type of fix cast steel bollards BOLLARDS PF-111 Fix Bollard Cast Steel Barcelona-92 Ø 100 H 900 A U T O M I C B L A R D S U T O M I C B O L A R D S U T M A T I C B O L R D S A U T O M I C B L A R D S U T O M I C B O L A R D S U T M A T I C B O L R D S A U T O M I C B L A R D S U T O M I C B O L A R D S U T M A T I C B O L R D S AUTOMATICBOLL PF-051 Fix Bollard Cast Steel Badalona Ø 100 H 900 PFF-010 Fix Bollard Cast Steel Fuencarral Aluminium Ø 115 H 500 PFP-015 Fix Bollard Cast Steel Peon Ø 200 H 650 PFC-020 Fix Bollard Cast Steel Cartagena (Soldado) Ø 180 H 500 PFG-030 Fix Bollard Cast Steel Generatriz Aluminium Ø 200 H 350

FIX BOLLARDS KLP PLASTIC

Type of fix klp plastic bollards PFPR-140 Fix Bollard Klp Plastic Round Ø150 H 1.400 PFPC-120 Fix Bollard Klp Plastic Square 150X150 H 1400 PFPO-132 Fix Bollard Klp Plastic Octogonal Black Ø150 H 1.320 PFPOG-133 Fix Bollard Klp Plastic Octogonal Grey Ø150 H 1.320 PFPO-134 Fix Bollard Klp Plastic Manchester Black Ø113 H 1.250

FIX BOLLARDS RECYCLING BOLLARDS

Type of fix recycling bollards PFR-001 Fix Bollard Recycling Material Modell 1 PFR-002 Fix Bollard Recycling Material Modell 2 PFR-003 Fix Bollard Recycling Material Modell 3 PFR-004 Fix Bollard Recycling Material Modell 4 PFR-005 Fix Bollard Recycling Material Modell 5

FIX BOLLARDS – GUIDE POSTS

Type of guide posts HV-175 Guide Post H-75 Polypropilene Reflective HV-176 Guide Post H-50 Polypropilene Reflective

Fix bollards 53

OTHER

PRODUCTS A U T O M I C B L A R D S U T O M I C B O L A R D S U T M A T I C B O L R D S A U T O M I C B L A R D S U T O M I C B O L A R D S U T M A T I C B O L R D S A U T O M I C B L A R D S U T O M I C B O L A R D S U T M A T I C B O L R D S AUTOMATICBOLL

Other Products 55 AUTOMATICBOLL M A T I C B O L R D S B O L A R D S U T A R D S U T O M I C A U T O M I C B L M A T I C B O L R D S B O L A R D S U T A R D S U T O M I C A U T O M I C B L M A T I C B O L R D S B O L A R D S U T A R D S U T O M I C A U T O M I C B L ROLLING BOLLARDS Rolling Bollard “Dancer”

Recommended for parking areas and containers Serie Ø 114mm

DESCRIPTION

• Bollard with square base screwed on the ground. • When a vehicle pushsed it, the bollard rolls by a spring, always returning automatically to a vertical position.

TYPE OF ROLLING BOLLARDS “DANCER” STAINLESS STEEL POI-522-8mm Rolling Bollard Stainless Steel Ø 114 H 500 E 8,56 POI-522-6mm Rolling Bollard Stainless Steel Ø 114 H 500 E 6,02 POI-522-3mm Rolling Bollard Stainless Steel Ø 114 H 500 E 3,05 POI-522-2mm Rolling Bollard Stainless Steel Ø 114 H 500 E 2,54

TYPE OF ROLLING BOLLARDS “DANCER” STEEL PLASTIFIED POI-522-8mm Rolling Bollard Steel Plastified Ø 114 H 500 E 8,56 POI-522-6mm Rolling Bollard Steel Plastified Ø 114 H 500 E 6,02 POI-522-4mm Rolling Bollard Steel Plastified Ø 114 H 500 E 4 FOLDING AUTOMATIC BOLLARDS

Automatic Parking Privacy – Type “El Cairo”

System to reserve parking places with remote control or mobile phone and with any electric connection.

Pneumatic, hydraulic or electric system with a switch cupboard and a power supply.

Special applications for horizontal parking places.

Automatic Parking Privacy Type “El Cairo” RAA-167 Automatic Parking Privacy El Cairo RAA-167-M Automatic Parking Privacy “Madrid”

System to reserve parking places, limit private areas or define private spaces.

Low intenstive use because the open and close system is by a manual key.

56 Other Products Folding Bollard With Lock

Recommended for squares, streets, parking and places with hardly vehicles transit.

Serie Ø 114mm

DESCRIPTION

• Bollard with square base screwed on the ground. • The lock of the bollard must be opened with a key and the bollard folds down to the ground and it allows the access.

APA TYPE OF FOLDING BOLLARDS WITH LOCK PCI-521-2mm Folding Bollard Wieh Lock Stainless Steel Ø 220 H 500 E 2,54 PCI-521-3mm Rolling Bollard Steel Plastified Ø 220 H 500 E 3,05 PCI-521-6mm Rolling Bollard Steel Plastified Ø 220 H 500 E 6,02 PCI-521-8mm Rolling Bollard Steel Plastified Ø 220 H 500 E 8,18

Manual parking privacy reserve – Type “APA” PCI-521

• Manual system of steel to reserve parking places • H 480 mm x L 730 mm x W 18 mm • Manual running with a key

Manual parking privacy reserve TYPE APA RAA-160A Manual parking privacy apa with same key RAA-160 B Manual parking privacy apa with different key

Manual parking privacy reserve – Type “PYF”

• Manual system of steel plastified to reserve parking places. • H 450 mm x L 500 mm x W 20 mm • Manual running with a security key, own made PYF

Manual parking privacy reserve type PYF RRA-162 Manual parking privacy PYF

RRA-162 Manual parking privacy reserve – Type “CONCEALABLE”

• Manual system of steel galvanized to reserve parking places • H 600 mm x L 800 mm x W 20 mm • Manual running with a key

Manual parking privacy reserve Type CONCEALABLE POT-163 Manual parking privacy Concealable POT-163

Other Products 57 AUTOMATICBOLL M A T I C B O L R D S B O L A R D S U T A R D S U T O M I C A U T O M I C B L M A T I C B O L R D S B O L A R D S U T A R D S U T O M I C A U T O M I C B L M A T I C B O L R D S B O L A R D S U T A R D S U T O M I C A U T O M I C B L SPIKE BARRIERS

MECHANICAL SPIKE BARRIER

APPLICATION

The spike barrier system is the perfect solution in order to be integrated in a security system, where the access must be allowed in only one way.

TECHNICAL CHARACTERISTICS

• It allows the access in only one sens • Teeth of yellow steel plastified • Mesures of teeth = w10mm x h60mm • Unit screwed to the ground • It allows the maintenance without civil works • Simple installation • Weight = 15 Kg • Pneumatic, hydraulic or electric powered

SPIKE Barrier with mechanical spring

SP-475 Spike Barrier With Mechanical Spring H 110mm x W 475mm SP-476 Spike Barrier Pneumatic Actuator H 110mm x W 475mm SP-477 Spike Barrier Electric Actuator H 110mm x W 475mm SP-478 Spike Barrier Hydraulic Actuator H 110mm x W 475mm

As we are manufacturer we can develop any special application

850 1460 250 265

550 1270

58 Other Products ROAD

BLOCKERS A U T O M I C B L A R D S U T O M I C B O L A R D S U T M A T I C B O L R D S A U T O M I C B L A R D S U T O M I C B O L A R D S U T M A T I C B O L R D S A U T O M I C B L A R D S U T O M I C B O L A R D S U T M A T I C B O L R D S AUTOMATICBOLL

APPLICATION

• High security system to control the access to a limited area where there are a usually heavy vehicles transit, trucks, trailer, tanks…

TECHNICAL CHARACTERISTICS

• Available in different heights and widths. • For installations in open areas, banks, airports, bor- der crossing, embassies, ministries, parkings… • Heights = 400mm / 500mm / 600mm / 800mm / ROAD BLOCKERS 1000mm ( + special ) RB-400-LONG Road Blocker H 400mm X Long • Widths = 1000mm / 2000mm / 3000mm / 4000mm RB-500-LONG Road Blocker H 500mm X Long / 5000mm ( + special ) RB-600-LONG Road Blocker H 600mm X Long • Pneumatic, hydraulic or electric powered RB-700-LONG Road Blocker H 700mm X Long RB-800-LONG Road Blocker H 800mm X Long RB-900-LONG Road Blocker H 900mm X Long RB-1000-LONG Road Blocker H 1000mm X Long

As we are manufacturer we can develop any special application

Beni-Enzar Frontier, Melilla.

Other Products 59 SAUTOMATICBOLLARDSAUT L A R D S U T O M I C B I C B O L A R D S U T M O M A T I C B L R D S U S A U T O M I C B L R D L A R D S U T O M I C B I C B O L A R D S U T M O M A T I C B L R D S U S A U T O M I C B L R D L A R D S U T O M I C B C B O L A R D S U T M I M A T I C B O L R D S U A U T O M I C B L R D S AUTOMATIC PARKING- PRIVACY

System to reserve parking places with remote control and New mechanism of a spring, that it runs when the vehicle without any electric connection. press with the wheels over the system, compressing the gas spring that allows the raising with the remote control. The system goes up and down by the remote control of the owner of the parking place. Perfect for reserve the disable parking places.

Its installation is very simple and it doesn´t need any kind of cables, neither an electric connection, only 7 screws fixed to the ground.

Automatic Parking Privacy Type “Autonomous” RRA-166 AUTOMATIC PARKING PRIVACY AUTONOMOUS

Technical Characteristics Simple Running Any electric installation “autonomous” Battery Battery type "D" durability 4 years Life It support all the wheather conditions Control 15 remote controls by system Resistence 3 T weight Reinforcement Mechanism to avoid the crashing

Detector to avoid that the system could be moved up Security when a vehicle is just over it

Mesures H 42 cm x w 120 cm Weight 20 Kg

1105 110 100

1203 3000

77° 420

530 6000

1500 2400

2400 100

60 Other Products OTHER SECURITY

DEVICES A U T O M I C B L R D S M A T I C B O L R D S U C B O L A R D S U T M I L A R D S U T O M I C B S A U T O M I C B L R D O M A T I C B L R D S U T I C B O L A R D S U M O L A R D S U T M I C B R D S A U T O M I C B L U T O M A I C B L R D S M A T I C B O L R D S U C B O L A R D S U T M I LARDSAUTOMATICBOLLARD SAUTOMATICBOLLARDSAUT

PEDESTRIAN BOLLARDS

Security devices manufactured specifically to prevent collisions in exclusively pedestrian areas. These bollards have been designed and manufactured in order to obtain notable advantages over other existing technologies for similar pur- poses of the sector.

A device is provided in order to raise bollards at zebra cros- sings, by using a temporary drive impulse that activates when traffic light turns red for vehicles in the marked and regulated crosswalks. Green traffic light un-activates the ELASTOMERIC POLYMER BOLLARD system. Therefore cars are forced to stop and pedestrians may cross with absolute security and safeguard in mind. The elastomeric polymer bollards are a new material with unique properties, which provide maximum strength and fle- Patented System. xibility, providing safer and more durable bollards.

Due to its rigid characteristic, it perfectly serves to prevent the passage of vehicles in delimited areas, its flexibility makes the bollards virtually unbreakable. When elastomeric polymer bollards receive an impact the bollards will return to their original position. No destroyed parts, no dents, no rusts.

Presion y Fuerza can manufacture the elastomeric bollards with attractive designs in record time. The elastomeric polymer bollards ensure almost unlimited duration.

Other Products 61 AUTOMATICBOLL M A T I C B O L R D S B O L A R D S U T A R D S U T O M I C A U T O M I C B L M A T I C B O L R D S B O L A R D S U T A R D S U T O M I C A U T O M I C B L M A T I C B O L R D S B O L A R D S U T A R D S U T O M I C A U T O M I C B L SPEED REDUCERS

APPLICATION

System for applications where it is necessary that vehicles reduce speed, like in residential , school areas, pedestrian streets, bycicle way…

TECHNICAL CHARACTERISTICS

• The speed reducer falls directly on the vehicle when • The installation is made to balance the strenght of it is moving, producing a vertical impulse . each element and to allow a well balanced distribu- • The driver will have negative consequences in his tion. Each element has two lace elements to give own security if the speed is not the allowed. consistency. • The speed reducers pyf are necessaries to increase • Each module allows the rain drainages and it is ins- security in residential areas, school zones, pedes- talled with screws and expanding bungs. For the trian crossing, bicycles, childrens, etc. installation it is only necessary one borehole and a • The speed reducers pyf are a modular system com- screw key. posed by central elements and external elements, • The 3 cm central elements have 5 screws and the 5 made in natural rubber, black with yellow reflectors. cm central elements have 7 screws. Washers are • The natural rubber allows a bigger longevity. set in the elements to make the road-elements life • It also increases security because the friction bet- longer. ween the vehicle´s wheel and the speed reducer is • It is necessary to make the relevant vertical signs bigger; both are rubber. before the speed reducers installation. • The yellow insertions have a big retroreflective and non-slip capacity and they give visibility in case of bad weather conditions or darkness.

SPEED REDUCERS HEIGHT 3 CM PC-3CM Speed reducer – central part 3 cm EL-3CM Speed reducer – side part 3 cm

SPEED REDUCERS HEIGHT 5 CM PC-5CM Speed reducer – central part 5 cm EL-5CM Speed reducer – side part 5 cm

62 Other Products AUTOMATIC ELECTRICAL

POWER SUPPLY A U T O M I C B L R D S O M A T I C B L R D S U A T I C B O L R D S U M C B O L A R D S U T M I O L A R D S U T M I C B A R D S U T O M I C B L S A U T O M I C B L R D T O M A I C B L R D S U M A T I C B O L R D S U T I C B O L A R D S U M B O L A R D S U T M I C L A R D S U T O M I C B DSAUTOMATICBOLLARDSA

• Connection system with tight bases and power supplies. • For applications in public buildings, fairs, squares, markets… where usually it is necessary the connection of electric machines. • Complet manufactured in stainless steel aisi-316-l anticorrosive marine. • IP-66, IP-67, IP-68 Diferents watter-proof protec- tions. • Well done drainage it is necessary and obligated.

The structure of one automatic electrical power supply is composed by the following steps

Step nº 1: Choise 1 automatic electrical power supply

TYPE A – ELECTRICAL POWER SUPPLY ROUND TEER-800/4 Electrical power supply round for 4 bases TEER-800/8 Electrical power supply round for 8 bases

TYPE B - ELECTRICAL POWER SUPPLY SQUARE TEEC-800/4 Electrical power supply square for 4 bases TEEC-800/8 Electrical power supply square for 8 bases

Step nº 2: choise one distibution switchboard

DISTRIBUTION SWITCHBOARD CD-810 Distribution switchboard 4 connections CD-812 Distribution switchboard 8 connections

Step nº 3: choise nº of tight bases with the voltage and intensity required

TIGHT BASES BE-820 Tight Base 3 P + T 380 V 63 A + magnetothermic BE-820-N Tight Base 3 P + N + T 380 V 63 A + magnetothermic BE-825 Tight Base 3 P + T 380 V 32 A + magnetothermic BE-825-N Tight Base 3 P + N + T 380 V 32 A + magnetothermic BE-826 Tight Base 2 P + T 220 V 32 A + magnetothermic BE-830 Tight Base 3 P + T 380 V 16 A + magnetothermic BE-830-N Tight Base 3 P + N + T 380 V 16 A + magnetothermic BE-831 Tight Base 2 P + T 220 V 16 A + magnetothermic BE-880 Tight Base domestic switch BE-900 Base with stainless steel key for water

Other Products 63 AUTOMATICBOLL M A T I C B O L R D S B O L A R D S U T A R D S U T O M I C A U T O M I C B L M A T I C B O L R D S B O L A R D S U T A R D S U T O M I C A U T O M I C B L M A T I C B O L R D S B O L A R D S U T A R D S U T O M I C A U T O M I C B L COMMERCIAL CONDITIONS

STANDARD TERMS OF SALE AND DELIVERY FOR PRESION Y FUERZA, S.L

1. Application purchaser must complain immediately to PRESION Y FUERZA, S.L. 1.1 These standard terms of sale and delivery shall apply to extent that they are not 10.2 The purchaser shall inspect consignments immediately on receipt to check for waived by written agreement by the parties concerned. Any terms specified by the pur- any shortages, defects, errors or any other deviations from the contract. If the purchaser chaser which conflict with these standard terms of sale shall not be binding on PRESION wishes to complain to PRESION Y FUERZA, S.L. the purchaser shall submit such com- Y FUERZA, S.L., even though PRESION FUERZA, S.L fails to make any complaint plaints to PRESION Y FUERZA, S.L. no later than 10 days after receipt of the products if against them. No deviation from the terms shall apply without the explicit written consent the relevant defects could have been discovered during the purchaserʼs inspection on re- of PRESION Y FUERZA, S.L. ceipt of the delivered products. 2. Ordering 10.3 Any damage or loss occurring during transport shall be of no concern to PRE- 2.1 No final agreement concerning sale or delivery shall exist between PRESION SION Y FUERZA, S.L. and claims in such circumstances may only be made against the Y FUERZA, S.L. and the costumer, until PRESION Y FUERZA, S.L. has given its accep- transport agent concerned. tance as an order confirmation or other explicit written confirmation. 11. Rights in case of lack of conformity 2.3 Quotations, pro forma invoices and other associates correspondence shall not 11.1 PRESION Y FUERZA, S.L liability for defective products is limited as follows: be binding on PRESION Y FUERZA, S.L. PRESION Y FUERZA, S.L. is only obliged to perform either re-delivery or repair of the 2.4 No cancellation or alteration of orders is regarded as having been accepted defective product preferred by PRESION Y FUERZA, S.L. and only if PRESION Y until PRESION Y FUERZA, S.L. has confirmed the fact in writing. In case of cancellation FUERZA, S.L. has received the customerʼs written complaint within 12 months of the de- or alteration the purchaser shall reimburse PRESION Y FUERZA, S.L. for all reasonable livery date. costs incurred in connection with the cancellation or alteration of orders. 11.2 If defects are discovered in the design, materials or production of any PRE- 3. Terms of delivery SION Y FUERZA products the customer shall complain immediately in writing to PRE- 3.1 All deliveries by PRESION Y FUERZA, S.L. shall be ex works (EXW Incoterms SION Y FUERZA,S.L. and such allegedly defective product shall then be sent to PRESION 2000), and the purchaser shall bear all risks in case of loss, damage or delay during trans- Y FEURZA, S.L. or to an address stipulated by PRESION Y FUERZA, S.L. with freight and port. In the absence of any agreement to the contrary, transport will be performed using insurance paid by the sender, accompanied by a description of the reason for such return. the means PRESION Y FUERZA, S.L. deems best without any liability for PRESION Y If PRESIONY FUERZA accepts that the product is defective and the purchaser has com- FUERZA, S.L. Insurance will only be taken out in the event of a written request by the plained in time, PRESIONY FUERZA, S.L. shall dispatch the product after replacement or purchaser. repair sending the defective product to PRESION Y FEURZA, S.L. shall reimburse the 3.2 PRESION Y FUERZA, S.L. undertakes to take appropriate measures to deliver purchaser for the freight costs incurred by the purchaser in sending the defective product on time. If a delay nevertheless occurs, entitle to cancel the order. A late delivery shall not to PRESION Y FEURZA, S.LʼS place of business, but only if PRESION Y FUERZA, S.L entitle the purchaser to claim compensation. has approved in writing of the method of dispatch and the costs incurred prior to the dis- 4. Tax and duty patch of products. 4.1 In addition to the purchase price, the purchaser shall pay any tax, duty or cus- 11.3 The purchaser is responsible for the determining the suitability of PRESION Y toms duty for the purchased goods as well as any necessary expenses connected with the FUERZA products for specific application. approval of the purchased goods. 11.4 PRESION Y FUERZA, S.L. will not in any circumstances remove, replace or 5. Prices remount PRESION Y FUERZA, products. Redelivery or repair under the guarantee will 5.1 PRESION Y FUERZA, S.L. reserves the right to change prices until a final order under no circumstances be performed outside PRESION Y FUERZA, S.L. places of bu- confirmation has been issued. PRESION Y FUERZA, .SL. also reserves the right to siness. change the prices of confirmed orders in case of change in production costs 12. Product liability salaries/wages cost of material, sub-supplies, exchange rates, expenses imposed by pu- 12.1 PRESION Y FUERZA, S.L shall be liable for product liability in accordance blic authorities, and the official discount rate (den officielle diskonto) with the relevant legislation in this connection, but does not assume liability in any degree 6. Terms of payment beyond that specified by the legislation. Any product liability not laid down by law but which 6.1 Payment shall be made no later than at the time of delivery ex works, unless has been developed in accordance with legal practise concerning compensation is thus otherwise specifically agreed in writing. explicitly waived. In addition, PRESION Y FUERZA, S.L. shall not be liable for operation 6.2 If payment is delayed, PRESION Y FUERZA, S.L. shall be entitled to claim a 2% losses, loss of profits or other indirect losses caused by defective PRESION Y FUERZA interest on the purchase price pr month or part of a month, as well as to withhold all fu- products. ture consignments. If payment is delayed, PRESION Y FUERZA, S.L. shall be entitled to 12.2 The purchaser shall indemnify PRESION Y FUERZA, S.L. to the extent that demand that the purchaser pays all reasonable costs incurred in connection with legal or PRESION Y FUERZA, S.L. is liable vis-à-vis third parties for any damage or loss for wich non-legal steps taken with a view to collection payment. PRESION Y FUERZA, S.L. is liable vis-à-vis the purchaser in accordance with clause 12.1 6.3 The purchaser shall not be entitled to withhold any payments in respect of alle- above. ged claims against PRESION Y FUERZA, S.L. unless such claims have been accepted 13. Force majeure in witting by PRESION Y FUERZA, S.L. in advance. 13.1 The following circumstances result in exemption from liability if they prevent 6.4 If the purchaser fails to take a delivery of consignments or part-consignments performance of agreement or make performance unreasonable onerous: labour disputes which are ready for delivery on the agreed day, the purchaser shall make a payment any- and any other circumstances beyond the control of the parties concerned, such as fire, way as if delivery had been effected, in the absence of any agreement to de contrary. war, mobilisation or military call-up of similar dimensions, requisition confiscation, currency 7. Property rights restrictions, civil unrest or riots, the absence of transport, general shortages of goods, res- 7.1 Until PRESION Y FUERZA, S.L. has received the full payment for products de- trictions in fuel, and defects or delays in deliveries from sub-suppliers due to any of the cir- livered such products shall remain the property of PRESION Y FUERZA, S.L. even thought cumstances mentioned in this clause. the purchaser has started to use or process the products, or started incorporating the pro- 13.2 The circumstances mentioned shall only result in force majeure if their influence ducts in its own products. of the performance of the agreement at the time of the formation of the agreement was not 8. Intellectual property rights possible to predict. 8.1 PRESION Y FUERZA, S.L. reserves all rights to the product and their design. 13.3 The party wishing to claim any cause of force majeure as mentioned in clause Products may not be copied, or given to any third parties with a view to copying the pro- shall without delay inform the other party in writing about the beginning and end of such ducts. All drawings and description sent to the purchaser shall remain the property of PRE- causes. In case of force majeure on the part of the purchase, the purchaser shall cover SION Y FUERZA, S.L. and may not be copied, transfered or shown to any third parties in the costs incurred by the seller in connection with securing and protecting the PRESION any other way without the consent of PRESION Y FUERZA, S.L. Y FUERZA, S.L. products concerned. 8.2 If the provision in clause 8.1 is violated, the purchaser shall pay PRESION Y 14. Confidentiality FUERZA, S.L. the following: 14.1 The purchaser shall keep strictly secret and not disclose to any third party any 1. Compensation for any loss attributable to unlawful coping. confidential information received through doing business with PRESION Y FUERZA, S.L. 2. All costs incurred in connection with the legal pursuit of PRESION Y FUERZA, 15. Applicable law and venue for disputes S.L. rights. 15.1 Any disagreements or disputes between PRESION Y FUERZA, S.L. and the 3. All costs incurred in connection with the non-legal pursuit of PRESION Y purchaser shall be settled by Spanish law only. FUERZA, S.L. rights. 9. Technical changes and approval 9.1 PRESION Y FUERZA, S.L. reserves the right to make technical and other changes in products, including ordered products without notice if it can be done without changing the agreed technical specifications. 9.2 PRESION Y FUERZA, S.L. is not liable for absence or misinterpretation of information in catalogues and other written material drawn up by PRESION Y FUERZA, S.L. 9.3 The purchaser shall be fully liable for the application, use and operation of any PRESION Y FUERZA product, whether or not such application, use or operation has been approved by PRESION Y FUERZA, S.L. 9.4 The purchaser undertakes to apply for all necessary national or international approvals of any product in which PRESION Y FUERZA, S.L. products are used. 10. Complaints 10.1 If the purchaser wishes to claim that the delivered products are defective, the

64 Commercial Conditions