MP02 Mobile Phone Instruction manual Contents Part one 16 Network and SIM information 22 Network connection 27 Phone information 16 Network compatibility 22 Signal strength 27 Technical information 16 SIM information 22 Mobile network provider settings 27 Activity log and storage counts 6 Safety 16 Inserting a SIM card 27 Data usage 16 Viewing the SIM’s phone number 6 Using the MP02 safely 23 Sounds 16 SIM PIN 7 Safe disposal information 23 Ringtone selection 28 Bluetooth 17 Charging the battery 23 Message alert selection 28 About Bluetooth 8 Emergency calls 23 Phone volume level 28 Turning Bluetooth on and off 17 Cable compatibility 23 Silent mode 28 Pairing with another device 8 About emergency calls 17 Using the supplied charger 23 Vibration alert feature 28 ‘Visibility’ 8 Making an emergency call 17 Charging from a computer 23 Start-up/shut-down sound 28 Device name 9 First steps 17 Using a different charger 17 Troubleshooting 24 Date and Time 29 Shortcuts 9 How to use this manual 17 Preserving battery charge 24 Automatic or manual setting 29 Introducing Shortcuts 9 Using a new MP02 for the first time 18 Switching on and off 24 Setting the date manually 29 Creating a Shortcut 10 Controls and key components 24 Setting the time manually 29 Features and actions that can be linked to 18 Switching on 24 Choosing 12-hour or 24-hour format 29 Using a Shortcut 10 Included with the MP02 18 Switching on for the first time 24 Alternate time zone 29 Deleting a Shortcut 18 Switching off 11 Keypad 25 Language selection 30 Entering text I 25 The operating system language 30 The T9 system 12 The MP02’s operating system Part two 25 The input language 30 Memorising the keypad 12 The Home screen 12 Main Menu 26 Resetting the MP02 31 Entering text II 13 Status menu 20 Security I 26 Forced restart 31 Text-entry modes 13 Options Menus 20 About the keypad lock feature 26 Deleting all Contacts 31 Input languages 14 Scrolling 20 Locking and unlocking the keypad 26 Deleting everything 31 Capitalisation 14 Highlighting 20 Setting the keypad to lock automatically 26 After a reset 14 Selecting 20 Passcode protection 15 Notifications 20 SIM PIN 21 BlackBerry Secure
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 2 Contents
32 Entering text III 37 Copying a Contacts .vcf file from a computer Part three 51 Message threads to the MP02 52 Replying to a message 32 Using predictive text 52 Forwarding a message 32 Using multi-tap text entry 38 Calls I 44 Clock features 52 Deleting messages 52 Using message templates 33 Entering text IV 38 Making a call 44 Alarm 53 Using the content of a text message 38 Speed-dial numbers 44 World Clock 33 Entering numbers 53 Alternatives to backing up 39 Receiving a call 45 Timer 33 Entering a space 39 Using phone-based automated services 45 Stopwatch 33 Entering other characters 39 Ending a call 33 Entering ideograms 39 Two calls simultaneously 46 Calendar Part four 33 Deleting text 39 Putting a call on hold 47 Calculator 34 Contacts I 40 Calls II 55 Appendix 1 34 About the Contacts directory 55 Regulatory information 40 Voicemail 34 Adding Contacts 48 Updating the operating system 40 Diverting incoming calls 56 Appendix 2 34 Viewing Contacts 41 Call history 35 Amending or adding numbers to Contacts 49 Providing Internet access 56 Trademarks 35 Deleting a Contact 42 Calls III 35 Viewing the MP02’s own number 42 Call volume levels 50 Notes 36 Contacts II 42 Using the hands-free speaker 50 About Notes 42 Muting the microphone 50 Creating a Note 36 Speed-dial numbers 42 Using external audio equipment (e.g. an Copying and moving Contacts between the 50 Adding a Reminder earpiece or an in-car system) 36 MPO2’s memory and the SIM card 50 Viewing a Note 42 Putting calls on hold 36 Sharing Contact information with other 50 Amending a Note 42 Showing/hiding phone number on outgoing devices 50 Deleting a Note calls 37 Contacts III 51 Text messages (SMS) I 37 Backing up Contacts 51 Texting on the MP02 37 Creating a Contacts .vcf file on the MP02 51 Composing and sending a message 37 Copying the Contacts .vcf file to a computer 51 Incoming messages
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 3 About this instruction manual
⏤ Version All information and illustrations are indicative 1.0 only; individual units may vary.
⏤ Revision date July 2019
⏤ Change First version
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 4 Part one
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 5 Safety Using the MP02 safely Be aware of radio wave interference Be safe on the road Keep the MP02 clean and dry The MP02 emits radio waves, which may Obey all local laws covering the use of mobile Do not use it in dusty or dirty conditions. Do interfere with other electronic devices. phones in motor vehicles. Do not use the not let it get wet or use/store it in areas of Interference from other electronic devices phone while driving, unless in conjunction humidity. The MP02 is splash-proof but is may affect the functioning of the MP02. with an appropriate hands-free device and NOT water-proof. Protect it from all forms of then only if legal to do so. moisture at all times. If taking it from a cold Do not use the MP02 in the following area to a warm area, place it in a plastic bag Before using the situations/ environments: Be alert to distraction first, to prevent condensation. Restricted areas Use of headphones may affect the ability to Protect against heat and cold MP02, read the Turn off the MP02 before entering areas hear external sounds and can lead to a following safety where the use of mobile phones is not allowed dangerous lack of awareness of one’s Do not expose the MP02 or charger to fire or or where it may cause radio interference or surroundings. other heat sources. It may cause explosion, information danger. fire or other hazards.
carefully. Medical devices and hearing aids. Prevent hearing damage Avoid extreme temperatures (below 0° C or Keep the MP02 away from medical devices, Exposure to loud sound levels can above 40° C). Exposure to extreme including pacemakers and hearing aids. These permanently damage hearing. Do not hold the temperatures may cause the phone to stop could malfunction, potentially causing serious device near the ear in hands-free mode. Take working temporarily and/or cause permanent harm or death. care if using headphones or similar, as high- damage. Volatile materials volume settings may damage hearing. Do not use the MP02 in environments with a For optimal performance and battery life, risk of explosion, such as near petrol Keep away from children store the MP02 in temperatures between (gasoline) pumps. Sparks may cause an 15° C and 25° C. explosion or fire resulting in injury or death. Keep the MP02 out of the reach of small children. The device and its accessories are not toys, and they contain small parts. Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 6 Safety
Use the charger safely Leave it to the professionals Safe disposal information Only use the charger indoors. Use only Do not open or dismantle the MP02. The approved chargers and accessories that are battery is not consumer-replaceable and will known to be fully compatible. Never use a become hazardous if damaged. If liquid from The crossed-out symbol above signifies that damaged charger or other accessory. Unplug the battery touches the skin or eyes, seek the product (including its battery) must be the charger when not in use, especially if there urgent medical assistance. If the MP02 stops disposed of separately from household waste. is a possibility of lightning nearby. Use the working, or if the battery needs to be • Separate out electronic equipment and charger for its intended purpose only. When replaced, contact a local Punkt. dealer or get packaging materials. unplugging always pull the plug (not the in touch with Punkt. directly. • Do not remove the battery. cable). • Do not dispose of the MP02 as unsorted municipal waste. At the end of its life, take it for recycling at an appropriate collection Take care if the MP02 is damaged point. Contact the local authority for more If the MP02 is damaged, stop using it and information, or locate a specialist phone place it in a plastic bag to contain possible recycling service. battery leakage. The screen on the MP02 is made of glass: protect it from impact. If it breaks, do not touch or attempt to remove the broken glass. Stop using it and arrange for the screen to be replaced by an authorised technician.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 7 Emergency calls
About emergency calls Making an emergency call Do not rely on the MP02 for emergency ⏤ If the keypad is not locked communication, especially when engaging in • Press the or the key repeatedly, until hazardous activities and/or entering areas of the home screen is shown. limited mobile network coverage. Any device can fail, and a network connection can never • Enter the appropriate emergency number be guaranteed. for the present location. Emergency call numbers vary by location. • Select Call by pressing the key and then Ensure that they are known, especially when the key. travelling. Most emergency numbers can be ⏤ If the keypad is locked called when the keypad is locked, but not all. • Press the On/Off button. Calls to emergency numbers can usually be made without a SIM card, without any credit • Enter the appropriate emergency number on a PAYG SIM card, etc. – but there are some for the present location. regional exceptions to this. • Select Call by pressing the key and then the key.
For full information about making calls to emergency numbers, see p 20.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 8 First steps
How to use this manual features that are unlikely to be used) and then The MP02 is a relatively simple phone to use. finish off by doing a total reset. But it is very different to a smartphone, it Troubleshooting tips are available on the does not have a “Help” feature, and many of Punkt. website. For any further questions, the its features are not readily guessable. Punkt. customer care team will be happy to Therefore, it is necessary to learn its features help. in a systematic manner. Using a new MP02 for the first time This manual is designed to be worked through in the order that it is written, Before an MP02 can be used phone for the comprehensively and from start to finish. It first time, the following steps need to be should be recognised as being primarily an taken:
instruction manual rather than a reference • Insert a SIM card. manual. Later sections will assume knowledge of information presented in earlier sections – • Fully charge the battery. especially the contents of Section One. • Turn the MP02 on.
The end result is that the user learns exactly • Follow the start-up process that will how his/her entire phone works; a refreshing automatically appear. change compared to the byzantine nature of a The MP02 is produced with a protective film smartphone’s operating system and apps. over the screen. Only remove this when it is certain that the phone is not going to be The best way to use this manual is to do a returned under the retailer’s returns policy. “dummy run”, entering temporary settings and playing with the phone until each and every feature is totally understood (even
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 9 Controls and key components
Main speaker On/Off button Noise-cancelling microphone
Hands-free speaker
Included with the MP02: SIM tray access
• USB charger
• USB-A to USB-C cable
• SIM removal tool
• USB-C earpiece
• Product documentation: Getting Started guide, Warranty and Product information
Microphone USB-C socket Antenna areas
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 10 Keypad Call Up Contacts Star
• With a Contact highlighted or • Within a menu or range of options: • Home screen: open Contacts • While entering text: view symbols number entered: make a call scroll upwards (long press: rapid • Home screen, long press: add a new list • Incoming call: accept call scrolling) contact • While entering a phone number: • Home screen: view call history • Within text: move cursor left (long insert a ✻ symbol press: rapid movement) Text messages Back • Increase numerical values Zero • Home screen: open the Messages • Home screen: open Status menu • Go back to previous screen menu • Insert a space or enter a zero • While entering text: delete one Punkt. • Home screen, long press: compose • While entering a phone number character (long press: delete all) a new SMS message into Contacts, long press: insert a + • Unlock screen • With a Contact or phone number symbol End • Select/open a highlighted option or highlighted: compose a new SMS 1 menu item message addressed to that Hash • Incoming call: reject call • Home screen: access Main Menu recipient • During a call: end call • While entering text: change input • Within a message thread: compose • Other areas of the operating mode and capitalisation setting a new message Number keys (1-9) system: end activity and return • While entering text: long press: directly to the Home screen Down • Enter a number or letter select input language • Home screen, long press: switch • Home screen, long press: call • While entering a phone number: phone off • Within a menu or range of options: voicemail (1) or activate a short-cut insert a # symbol scroll downwards (long press: rapid (2-9) scrolling) • Within text: move cursor right (long press: rapid movement) 1 Also known as crosshatch, hatch, pound, pound • Decrease numerical values sign, number, number sign, octothorpe, (garden) fence, crunch, mesh, hex, flash, grid, pig-pen, tictactoe, • Home screen: open Notifications scratch (mark), (garden) gate, hak, oof, rake, unequal, list punch mark
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 11 The MP02’s operating system
The Home screen The Home screen can be reached from other Instead of a areas of the OS by pressing the End key (or by The MP02’s minimalist Home screen always repeatedly pressing the Back key). touchscreen, the displays the current time, date and day of the MP02’s operating week. It also gives a very limited amount of All actions described in this instruction priority information about the phone, manual are based on starting from the Home system uses a including whether its battery is charging or if screen, unless otherwise stated. The MP02’s text-based interface, the charge level is below 10%, if the network secondary features are accessed via the Main signal is weak, and whether there are any menu, which is opened by pressing the key with dedicated keys for Notifications to read (e.g. an alarm setting, a while the Home screen is displayed. calls and text missed call, etc.) messaging. This page introduces some key Main Menu menus and actions This is opened by pressing the key when on that will be referred to the MP02’s Home screen. It is used to access some of the MP02’s repeatedly through the features and also to open the Settings menu. rest of this manual.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 12 The MP02’s operating system
Status menu Scrolling to an element on the Status menu will cause it to display specific status The Status menu can be opened from the information and/or offer an option to switch Home screen by pressing the Up key. It between On and Off. To switch on/off, or provides quick access to the following access more information, press the key. features/information: Long press the key when Tethering, Network • USB connection (only displayed when or Bluetooth are highlighted to access more connected to a computer) aspects of these features. • Tethering • Network • Battery • Silent mode • Aeroplane mode • Bluetooth
Options menus The top of an Options Menu is shown in the bottom-left corner of the screen. It is accessed Various elements of the operating system have by pressing the Down key (sometimes a short menu that contains a number of repeatedly, see the next section), and exited by specific commands. For example, when pressing the Up key. composing a text message the Options Menu offers actions like Send, Save as draft, and so on.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 13 The MP02’s operating system
Scrolling Long-pressing the Up or Down keys will accelerate the scrolling – particularly useful This is a fairly standard procedure, and is for moving through text as described done by using the Up and Down keys. above, and for accessing Settings at the However, it is important to be aware that it bottom of the Main menu. is sometimes necessary to scroll horizontally through text before continuing to scroll vertically upwards or downwards.
Highlighting Selecting
When something is scrolled to (e.g. a menu This is a two-stage procedure, comparable item or a text message) it becomes to moving a computer mouse’s pointer to highlighted. an item and then clicking on it. To select something on the MP02, first highlight it and then press the key. Selecting an item will generally enter a command, lead to another menu, reveal extra information, or access a feature.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 14 The MP02’s operating system
Notifications
Press the Down key to access Notifications. Each Notification can be expanded by scrolling to it and then, when it is highlighted, pressing the key. For some types of Notification, this causes a list of options to be displayed.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 15 Network and SIM information
Network compatibility Inserting a SIM card
The MP02 is a quad-band phone. It Warning: Only use the correct type can operate with 2G, 3G and 4G of SIM card, as described above. (LTE), and is VoLTE-compatible. Using another SIM card format may cause permanent damage to the phone and/or SIM card. SIM information Warning: When handling a SIM card, avoid finger-contact with the The MP02 uses a nano-SIM (4FF) metal area. card. It is okay to insert/remove the SIM card while the MP02 is switched on. 1. Place the MP02 face down on a table, 3. Put the SIM card into the tray with its rotated left or right as preferred. Insert metal contacts facing down (i.e. in the the SIM tray removal tool (provided) same direction as the front of the into the small hole at the side of the phone). The angled corner ensures Viewing the SIM’s phone SIM tray and press firmly to cause the correct orientation. number tray to pop out slightly. See p 20 for viewing the phone 4. Reinsert the SIM tray into the phone number linked to the SIM. 2. Pull the SIM tray to remove it from the and push until it clicks into place. phone. SIM PIN 5. Keep the SIM tray removal tool in a safe See p 20 for information about place, for example in the box that the activating the SIM’s PIN passcode MP02 was supplied in. protection.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 16 Charging the battery A new MP02 should be completely few minutes to appear). When the If using a third party USB charger, ensure Preserving battery charge charged before being switched on for the screen goes black, it can be reactivated that it comes from a reputable source. If the battery is close to running out of first time. (This will take about 2.5 by pressing the On/Off button. There are numerous counterfeit or charge and it is not currently possible hours.) otherwise defective chargers on the • When the battery image is solid white, to recharge it, power consumption can market that could damage the MP02 To prevent damage to the USB port or remove the cable by pulling the plug be minimised by taking the following and/or cause a fire. cable, hold the connector when removing (always pull in line with the socket, steps (explained elsewhere in this the USB-C cable from the MP02. Always and never pull the cable). Unplug the Troubleshooting manual). pull the connector in line with the USB charger from the mains (or switch off • Do not switch off: switching back on socket. its supply) to conserve electricity. If after several minutes the battery is not indicating that it is charging, despite the again uses a significant amount of Cable compatibility Charging from a computer On/Off button being pressed, carry out power. The MP02 requires a USB-C cable. It is also possible to use a computer’s the following tests (in any order). • Deactivate the vibration alert USB socket for charging the MP02. • Test the mains socket by plugging in feature. Using the supplied charger Before connecting to the computer, from another electrical device that is known • Reduce volume levels. Consider • Insert the small end of the supplied the Main menu open the Settings menu, to be working (e.g. a lamp). silencing the phone completely (the USB-C cable (either way up) into the then Connectivity, then Other options. If • Test the USB power supply by screen will illuminate whenever a socket on the bottom edge of the the USB connection is set to Sync mode, plugging the USB cable into an call or text message is received). MP02 with the wider part of the metal press the key to change it to Charge alternative USB power source that is • Deactivate Bluetooth. element. only. known to be working (e.g. a computer, • Try to keep the phone in an area • see below). Insert the other end of the cable into Charging from a computer will generally with a strong mobile signal. the charger provided. take longer than from a dedicated • Test the USB cable by using it to • Lock the keypad as soon as the • charger. connect a different device that is Connect the USB charger to an phone is no longer in use, to avoid known to be working, or by using a appropriate mains power outlet. If illuminating the screen Using a different charger different (compatible) USB cable that necessary, switch the mains supply on. unnecessarily. The MP02 is supplied with a small, is known to be reliable. • If the MP02 is switched off, it will now display an image indicating the charge portable charger. Faster charging can be level as it increases. (this may take a achieved by using a larger, desktop charger.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 17 Switching on and off
Switching on Switching on for the first time • If 12-hour clock format has been selected, use the Up and Down arrows • To switch the MP02 on, press and hold When an MP02 is switched on for the first to specify AM or PM for the current the On/Off button on the top of the time (or after a reset), it will prompt the time. When the correct option is phone. user to choose a language, choose a clock shown, press to enter. format (12hr/24hr) and enter the current • If the phone has been set to require a • Repeat this three times to set the passcode, enter it when requested and time and date, to ensure that text messages current date. (Note whether it is in press the key. More information are given a correct date stamp from the little-endian or middle-endian format.) about passcodes can be found on p 20. outset. The Back key can be used to return to a • If the SIM card has been set to require a previous stage. If the screen goes black, passcode, this will be requested next. Switching off More information about the SIM press any key or button to reactivate it. The passcode (PIN) can be found on p 20. setting-up process can be cancelled by To switch off, press and hold the On/Off switching the MP02 off. button, and then select Yes when • Select a language by using the Up and prompted. Down arrows to scroll through the list. When the desired language is highlighted, press to enter.
• Select the clock format by using the Up and Down arrows again to highlight the desired format, and then press to enter.
• Current time: enter the hours, either with the Up and Down arrows or the number keys. When the correct value is shown, press to enter. Repeat for the minutes value.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 18 Part two
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 19 Security I
About the keypad lock feature Setting the keypad to lock then Security, then Passcode. The SIM will come with a pre-set passcode (PIN). This is likely to be automatically • Select Enable passcode or Disable To protect the MP02 against universal for many/all of that company’s passcode as applicable. unauthorised access, and to reduce the The MP02 can be set to lock the keypad SIMs and therefore public knowledge; it likelihood of keys being unintentionally automatically after a specified length of • If this is the first time the passcode is should be changed immediately on pressed while the MP02 is in a pocket or time. being activated, use the keypad to receipt, even if only to protect it from bag, the keypad can be locked. create it (4-6 digits) and press the unauthorised change. • From the Main menu, select Settings, key. Repeat to confirm. In accordance with industry standards, it then Preferences, then Auto-lock. ! Activating PIN protection on the SIM is still possible to make a call to ⏤ Changing the MP02’s passcode card emergency numbers when the keypad is • Select the desired delay (or Never to locked (multiple numbers from around deactivate auto-lock). • From the Main menu, select Settings, With PIN protection activated, it will be impossible to use that SIM without the world are recognised, and the call is Passcode protection then Security, then Passcode, then given connection priority on the cellular Change passcode. entering its PIN each time any phone in network). Keeping the phone in a case The MP02 can be set to require its which it is installed is switched on. • Enter the current phone passcode when not in use can help prevent this passcode to be entered each time the and press the key. Important: Do not try to guess a SIM from happening unintentionally. For keypad is unlocked and also before PIN. If an incorrect number is entered more information about calls to carrying out a full reset. • Enter a new phone passcode and too many times (typically three attempts) emergency numbers, see p 8. press the key. Repeat to confirm. Ensure that multiple copies of the the SIM will become locked and it will ⏤ Locking and unlocking the keypad passcode are retained. If the passcode is SIM PIN not be possible to use it until a Personal forgotten and no copies are available, the Unlocking Key (PUK) has been entered. • Press the On/Off button. The screen MP02 will need to be returned to Punkt. The SIM card can be set to require a A PUK can be obtained from the SIM’s will go dark. for resetting. A fee will apply, and all data passcode (also known as a PIN, which provider. stands for “Personal Identification • on it will be lost. Pressing the On/Off button again will • From the Main menu, select Settings, reactivate the screen and the Home Number). This protects it against Activating or deactivating the MP02’s then Security, then SIM PIN. screen will be displayed; the keypad ⏤ unauthorised use in the MP02 or any passcode protection other phone. will still be locked. Press the key • Select Enable SIM PIN, enter the to unlock it. • From the Main menu, select Settings, current PIN and press , twice.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 20 Security I
⏤ Changing the SIM card’s PIN BlackBerry Secure
• From the Main menu, select Settings, then Security, then SIM PIN. BlackBerry Secure protection • Select Change SIM PIN. continuously monitors the MP02 for
• Enter the current PIN and press . activity or configuration changes that indicate a compromise to security, thus • Enter the new PIN (at least four helping to safeguard data that it holds. digits) and press . ⏤ Checking the MP02’s security status • Enter the new PIN a second time and press . The new PIN will now be • From the Main menu, select Settings, valid. then Security, then Security status.
• The status should be ‘Excellent’.
• If the status is ‘At risk’ the phone may be compromised. Contact Punkt. Customer Care for further information. The MP02 can still be used, but extra care should be taken regarding important data.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 21 Network connection
Signal strength Mobile network provider settings The current mobile network signal With a SIM is inserted, each time the Network setting Description strength can be ascertained by viewing MP02 is switched on it automatically Network in the Status menu. chooses a network provider according to information contained within the SIM. The radio antennae are located at the Roaming data Allows connection to other network top corners and along the bottom of the This can be overridden by choosing a providers when travelling abroad. MP02. Avoid covering these areas network provider manually. There are a during calls, especially when there is number of other settings that in some cases may need to be changed. limited mobile signal. Mobile data Provides access to the Internet using mobile network signal. Signal strength has a major impact on The name of the network provider battery life. If a mobile phone is used in currently in use can be viewed by an area with low signal, it has to highlighting Network in the Status menu. This may sometimes be different to the VoLTE 1 Allows voice calls over the 4G data transmit with higher power. If a phone network. is being used indoors, signal strength contracted network provider, as providers can sometimes be improved by using often collaborate to ensure coverage. the phone near a window or in another Manual network selection can be useful Chooses connection type between 2G, part of the building. near national borders, to avoid Network type 3G or 4G (LTE), depending on signal connection with a foreign provider and availability. thereby incurring unnecessary roaming Specifies automatic or manual network charges. Conversely, this may be Carrier selection. In manual mode, a list of preferable in situations where the local available network providers is 1 VoLTE: The carrier network needs to support this provider’s signal is too weak. displayed. service To change network settings, from the 2 APN: An APN is used for making a data connection. Configures Access Point Name 2 Not all network providers allow the APN settings to be Main menu, select Settings, then APN (APN) settings. For more details, edited/modified, and the parameters must be entered Connectivity, then Network. If necessary, contact the network provider. exactly as specified by them. the following settings can be changed.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 22 Sounds
Ringtone selection ⏤ To choose a ringtone option Silent mode vibration alert are both deactivated, the MP02 will still indicate an incoming call A range of ringtones are available; it is • From the Main menu, select Settings, The phone’s sounds (except the alarm via a message on the screen. also possible to have no sound at all when then Sounds, then Messages. clock) can be temporarily muted by there is an incoming phone call. activating Silent mode. • Listen to the two options by selecting Start-up/shut-down sound ⏤ To choose a ringtone option them; repeat by pressing again. • In the Status menu, highlight Silent mode and press the key. The MP02 can make a columbine sound • From the Main menu, select Settings, (This will not work if the phone is in when it is switched on and off. then Sounds, then Calls. Silent mode.) • Repeat to deactivate Silent mode. ⏤ To start or stop the pigeon • Listen to the available ringtones by • When the desired option has been • (This can also be done via the Sounds • From the Main menu, select Sounds, selecting them; repeat by pressing the selected (it will be marked with a solid menu.) and then Start-up sound. k. key again. (This will not work if circle), press the End or Back key to the phone is in Silent mode.) exit. Vibration alert feature • Press the key to toggle between On and Off. • When the desired option has been Phone volume level The vibration alert feature provides a selected (it will be marked with a relatively discreet indication of an solid circle), press the End or Back The MP02’s ringtone and text alert incoming call or text message. When it is key to exit. volume levels, together with other alert in “On” mode, it will always be activated tones, can be collectively adjusted as Message alert selection when a call or text is received, even when follows. the phone is on silent. A choice of two text message (SMS) alert • From the Main menu, select Settings, Switching off the vibrating alert will help sounds are available; it is also possible to then Sounds, then Phone volume. conserve the battery’s charge level. have no sound at all when a text message • Use the Up and Down keys to choose ⏤ To turn the vibration alert on or off arrives. the desired level. • From the Main menu, select Settings, • Press the End or Back key to exit. then Sounds, then Vibration. If the ringtone does not sound when a • Press the key to toggle between call is received, despite the phone not On and Off. being set to silent, this may be because call diversion is active. Even when both the ringtone and Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 23 Date and Time
Automatic or manual setting Setting the date manually • Change the hours and minutes Alternate time zone settings, and the AM/PM setting if The MP02 can be set to have the time and • Ensure that manual time setting is The alternate time zone feature makes applicable (phone set to 12-hour clock date updated automatically by the mobile activated, as described above. it possible to quickly change the display) by using the Up and Down network provider, if this is part of their MP02’s clock to match a different time • From the Main menu, select Settings, keys or the Number keys. Use the service. zone. (Note that this will affect the then Date and Time. and Back keys to move between fields. time/date stamp applied to text ⏤ To turn automatic date and time • The current date will be displayed • To finish, press the key with the setting on or off messages.) within the menu. Note that it is in final entry highlighted (hours or To select a different time zone • From the Main menu, select Settings, middle-endian format (month first). AM/PM). ⏤ then Date and time. • From the Main menu, select Settings, • To change the date, select it and use Choosing 12-hour or 24-hour then Date and Time. • The current setting will be displayed either the Up and Down keys or the format within the menu. number keys to alter each entry • The current time zone will be (month first). Use the and Back • Ensure that manual time setting is displayed within the menu. • To change it, select Mode and then keys to move between the fields. activated, as described above. press the key. • To change this, select it and then • To finish, press the key with the • From the Main menu, select Settings, move across the map by using the • Press the End or Back key to exit. year setting highlighted. then Date and Time. Up and Down keys. To ascertain whether automatic time and • The current time and format will be • When the required time zone is date setting is available, either contact Setting the time manually displayed within the menu. indicated, exit by pressing the the network provider or try entering a • Ensure that manual time setting is key. time that is slightly inaccurate and see if activated, as described above. • Select Time, then Format. This will it is corrected. (There may be a delay cause the phone to switch between • From the Main menu, select Settings, 12-hour and 24-clock format. before this happens.) Keep the difference then Date and Time. fairly small, to avoid problems with the • Press the End or Back key to exit. time/date stamp attached to text • The current time will be displayed Reactivate automatic time setting, if messages. within the menu. required. • Select Time, and then the current time as displayed in the menu that follows.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 24 Language selection
The MP02 functions The operating system language The input language This affects every aspect of the MP02 apart This refers to the language that is used for in the following from text entry. It can be set to function in creating Notes, messages, etc. languages: the following languages: The input language can also be set via the Danish, Dutch, English, Finnish, French, Preferences menu, but it can also be quickly German, Greek, Italian, Japanese, Norwegian, changed, while text is being entered, by Russian, Spanish, Swedish. long-pressing the Hash key. As well as affecting the predictive text, this provides To set the operating system language ⏤ access to diacritics (e.g. Québec rather than • From the Main menu, select Settings, then Quebec). Preferences. It can be set to the following languages: • The currently-selected OS language will be displayed within the menu. To change it, Arabic, Chinese (simplified), Danish, Dutch, select it and then choose the new language English, Finnish, French, German, Greek, from the list. Hindi, Italian, Japanese, Norwegian, Portuguese Russian, Spanish, Swedish. If the OS is set to a language that cannot be understood, the list of Languages can be accessed by following this sequence of key presses: End/ /Down x5/ /Down x2/ x2 If this does not work, switch the phone off and back on again, and then repeat the sequence.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 25 Resetting the MP02
Forced restart The rest of the phone (Settings, Notes, it elsewhere. (Always have at least two Messages, etc.) are also not affected. separate copies of important data.) If the MP02 stops responding, long-press Warning: This process cannot be See p 37 for information on how to do the On/Off button for at least ten this. seconds. Also, ensure that it is within the cancelled or undone. • From the Main menu, select Settings, stated minimum and maximum operating • From the Main menu, select Settings, temperatures. then Reset. then Reset. • Select Factory reset. If this does not solve the problem, please • Select Reset contacts. • Enter the phone passcode if passcode contact Punkt. Customer Services. • Confirm when prompted. protection has been activated. Deleting all Contacts Deleting everything • Confirm when prompted. This will cause all information to be This will cause everything on the phone deleted from the phone’s Contacts to be deleted, including any vCard copies After a reset directory. of the Contacts directory. When the phone is restarted, it will be necessary to go through the standard Any vCard copies of the Contacts ⏤ To remove all user settings and directory stored on the phone will not be permanently delete all user data and setting up procedure again. deleted. These can be deleted by vCard files. connecting the MP02 to a computer, Warning: This process cannot be either immediately after backing up or at cancelled or undone. a later point, or by doing a total reset as described in the next section. For more • Create a backup copy of the Contacts information on vCard copies, see p 37. For list, export it to a computer, and then maximum security, overwrite these files. delete it from the MP02 (and any Contact Punkt. for more information on others that may exist). Make a copy of how to do this. the most recent backup file and store
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 26 Phone information
Technical information Activity log and storage counts The MP02’s About menu links to The total number of calls that the phone technical information about numerous has made since it was new (or was last aspects of that specific phone, including reset), plus the current number of the following elements. Contacts, Messages and Notes saved in the phone, can be seen by selecting • The installed SIM and the network connection. Applications, which is also in the Settings menu. • The IMEI number (“International Mobile Equipment Identity”: a unique Data usage identifier, needed when contacting Data usage can be viewed by selecting Punkt.’s customer services Connectivity, then Data usage, again from department). the Settings menu.
• The phone’s IP address.
• The software version installed. The About section is located in the Settings menu, which is in the Main menu.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 27 Bluetooth
About Bluetooth Turning Bluetooth on and off ‘Visibility’ Bluetooth allows the MP02 to wirelessly To conserve the battery’s charge level, The MP02 can be made visible or invisible connect with other devices over short turn Bluetooth off when it is not needed. to other devices, by selecting Visibility on the Bluetooth menu. distances. It is named after the 10th As well as using the Main menu to access century Danish king Harald Bluetooth, the Bluetooth menu, Bluetooth can more Device name famous for bringing different tribes quickly be turned on and off via the This refers to how the MP02 is together. He is also responsible for the Status menu (see p 13). represented on other devices. The default oldest extant bridge in northern name is “MP 02”, but this can be changed Scandinavia. Pairing with another device if desired. ⏤ The MP02 uses Bluetooth to Creating a Bluetooth connection between two devices is called “pairing”. • Select Name on the Bluetooth menu. • connect with an earpiece/headphones • Delete the existing name by pressing or a car audio system, and • From the Main menu, select Settings, then Connectivity, then Bluetooth. the Back key and use the keypad to • exchange contact details with another enter the new name. device. • If Bluetooth is off, select Turn on. • Press the key to save the new A simple set-up process is required to • Next, select Devices, then Search for name. enable a Bluetooth connection with new devices. • The process can be cancelled by another device. • Select a device to pair with. repeatedly pressing the Back key (the A USB-based earpiece or pair of • Follow the on-screen instructions. A name will appear to be deleted, but no headphones can also be connected via the code number will be displayed; select changes will be saved). USB socket. Pair if it matches on both devices.
• The devices are now paired.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 28 Shortcuts
Introducing Shortcuts Features and actions that can be Using a Shortcut A Shortcut provides instant access to a linked to To use a shortcut, long-press its number feature pre-allocated by the user. Each key with the Home screen displayed. • Call Contact number key apart from “1” can be linked • Message contact Deleting a Shortcut to a feature from the list below. • New message It is not possible to simply remove a • New note Creating a Shortcut Shortcut (other than by resetting the • New contact • From the Main menu, select Settings, entire phone). The only option is to • Voicemail then Preferences, then Shortcuts. replace a number key’s Shortcut with a • Open app (see below) different Shortcut. • Choose a number key to link from. • Turn on Bluetooth (The “1” key is permanently linked to • Turn on Wi-Fi Voicemail.) • Turn on Tethering • Select the desired action. To create a Open App leads to this sub-list: Shortcut to access one of the MP02’s • Contacts features, e.g. the Clock, select Open • Clock App and select again from the • Messaging sub-menu that appears. • Settings • Notes • Calculator • Call history • Calendar
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 29 Entering text I
This section The T9 system Memorising the keypad The MP02 uses the T9 keypad system (T9 • Note that the two four-letter keys are describes how to stands for “text on nine keys”). Most of symmetrically placed: bottom-left and use the MP02’s the number keys also represent three or bottom-right. four letters plus the associated digit, “0” is keypad for entering • Memorise <1-symbols> <4-GHI> and used for entering a space, “1” accesses a <7-PQRS>, and then the rest of the text when creating short list of commonly-used punctuation keypad. Consolidate this by visualising marks and the Star key opens the full list the keys at spare moments throughout a Note, entering a of punctuation marks. Some punctuation the day, in horizontal, vertical and Contact’s name, marks will automatically have a space diagonal lines in both directions across added after them; this, or any character, the keypad. composing a text can be deleted by pressing the Back key. • Thenceforth, never look at the keypad. message (SMS), The T9 system takes time to learn, but This will be frustrating at first, but once the keypad has been memorised it is soon text entry will be possible at high etc. very effective. speed. Practise by creating a Note: select “Notes” • For maximum efficiency, use the MP02 from the Main menu, and then “New note” one-handed and with the non-dominant (clear it afterwards by repeatedly pressing hand. This is ultimately the fastest the Back key). method and it frees up the dominant hand for writing, using another device, etc. The <5-JKL> key has a raised dot on it for orientation: place the thumb there whenever the phone is picked up.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 30 Entering text II
Text-entry modes text and then selecting from the menu that Capitalisation appears. The MP02 can be set to one of three A word will automatically be rendered with text-entry modes. The most recently selected language will an initial capital letter if it appears to be at generally be retained for future text entry, the beginning of a sentence (i.e. is preceded • Predictive text: the MP02 offers but in some situations, for example in by a full stop and a space). suggestions as to what word is currently search fields or when adding Contacts, the To change capitalisation, press the Hash being entered. MP02 will switch to English (US). key immediately after entering word (or • Multi-tap text: letters are entered one When that activity has been completed, the any single letter). The following options are by one. input language will revert to that which has available. been previously set by the user. ______• Numbers only: only digits can be Abc Capitalise first letter entered. As standard, all the MP02’s text input ______languages are displayed. If desired, this can The text-entry mode is selected by pressing ABC All letters upper case be reduced to a user’s specific preferred the Hash key while entering text. The ______languages. modes are referred to as follows. abc All letters lower case
• ______• Predictive From the Main menu, open Settings, then Preferences, then Input language. Capital letters within words can be •
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 31 Entering text III
Using predictive text • If the desired word is not forthcoming, Using multi-tap text entry temporarily switch to multi-tap by • To enter a letter, find it on the keypad • Find the key that includes the first inserting a space, pressing the Hash key and press the applicable key repeatedly letter of the desired word, and press it and then deleting the space. Predictive once – ignore whatever letter appears and fairly quickly until the desired texting can be reactivated in the same character to be shown on the screen. If on the screen. Repeat for the second way, as desired. letter, and so on, always with a single the desired character is missed, keep press. (There is no time constraint.) • If a word is entered that does not exist pressing the key to go round again. in the predictive text dictionary, the • When the desired character is • The MP02 will provisionally create a MP02 will offer the option to add it. displayed, wait until the cursor word on the main screen, while also Press the key to do this, otherwise (immediately to the right of the letter) offering a series of words in the word simply continue entering text. disappears and then reappears. The bar at the bottom (including the displayed character will now be entered inserted word, which will be As an example, with the target word as and any further key presses of that highlighted). Scroll through the “prediction” the following routes are same key will display a new character. suggested words and/or continue to possible. • Pressing a different key at any time will enter letters. (It is important to • 7733 plus lots of scrolling remember which letters have been immediately cause the preceding entered.) • 77334 plus rather less scrolling character to be entered.
• • • “Junk words” may be generated. This is 773342 with brief scrolling If a mistake has been made, the character can be deleted by briefly a necessary side-effect of the word • 7733424, no scrolling required compression system. pressing the Back arrow and the process • (The MP02 will modify its predictions can be repeated. • When the correct word is shown (and after being used for a while, so the highlighted), enter it into the text by above outcomes may vary slightly.) pressing “0”. This will also add a space after the word. Alternatively, the word can be selected without adding a space by pressing .
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 32 Entering text IV Entering numbers Entering other characters Entering ideograms
• Common punctuation marks can be Long-press the Star key to access the • Individual numbers can be entered in either predictive or multi-tap mode by entered by repeatedly pressing the “1” MP02’s range of ideograms. long-pressing the applicable key. key. (The symbol on the key refers to Two grids of ideograms are available; these the voicemail speed-dial feature.) function in the same way as the symbols • Alternatively, Numbers only mode can • The Star key gives access to the full grids described see above. be used. In this mode, the 1-9 keys range of punctuation marks and special immediately enter their applicable To exit the ideograms grids without characters. Pressing it repeatedly will number and other characters are not entering anything, press the Back key. cycle through three grids of symbols. available. Long-pressing a key causes its Deleting text number to be entered repeatedly. • Each symbol's grid is a representation of the keypad . (The Star key is linked • Delete a single character by briefly Entering a space to Next on each grid.) pressing the Back key. • To enter a space between words, press • The desired symbol can be entered by • Delete all the entered text “0” when in either Predictive or pressing the key that equates to the simultaneously by long-pressing the Multi-tap mode. (The secondary symbol character’s position in the grid (each Back key. on the key denotes a space.) character has a label in small, faint text • Pressing the End key will cause entered • This can be repeated to enter multiple that identifies its linked key). text to be discarded. spaces. • To exit the symbols grids without • Pressing the “0” key twice in quick entering a character, press the Back key succession will cause a full stop to be (or select “Return” in the third grid). entered. • Symbols can also be entered by scrolling through the grids and pressing the key when a desired symbol is highlighted.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 33 Contacts I
About the Contacts Adding Contacts • Follow the previous instructions. directory There are multiple ways to create a new • Finish as described previously. Contact. 3) Number first, via the Home screen: A Contact is a person or 1) Via the Contacts menu: This method can be the most convenient when organisation, whose • Press the Contacts key. face-to-face with someone. phone number(s) are • Select Add contact. • With the Home screen showing, use the stored in the Contacts keypad to enter a phone number. directory. • Select an element from the list and enter the required numbers or text, pressing • Press the Down key and select Save, then the key to return to the menu. Special New contact.
characters can be accessed via the Star • Add more information as required, using key. the key to open and close each
• Continue with other elements on the list element.
(e.g. Name), as many or as few as is • Finish as described above. desired. Viewing Contacts • Finish by pressing the Call key (or by selecting Save), or cancel by selecting • Press the Contacts key. Discard. • Use the Up and Down keys to scroll 2) Based on a call that has been sent or through the list of Contacts. received: • This can be speeded up by selecting Search and then entering the Contact’s • Press the Call key and select the number to be used when adding a Contact. initial letter(s).
• Select Add to contacts.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 34 Contacts I
Amending or adding numbers to 3) Adding a number taken from within a Deleting a Contact text message that has been sent or Contacts • Press the Contacts key. received: 1) Via the Contacts menu: • Select a Contact, then Delete. • See “Using the content of a text • Press the Contacts key. message” (p 53). • Select Yes to confirm • Select a Contact to add the number 4) Adding a number entered on the Viewing the MP02’s own number to; this can be speeded up by Home screen: selecting Search and then entering • Press the Contacts key. the Contact’s initial letter(s). • As above, but select Add to existing • Select My number. (If no number is instead of New contact. shown, it can be added manually.) • Select Edit detail. • Press the End key or the key to • Add and/or modify information as described above, pressing the key exit. to open and close each field.
• Finish as described above. 2) Adding a number taken from a call that has been sent or received:
• Press the Call key and select the number to be added.
• Select Add to contacts, then Add to existing.
• Select a Contact to add the number to, using the Search feature if desired.
• Add a label for the number, if desired (it will be necessary to scroll through the number).
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 35 Contacts II
Speed-dial numbers Information from a Contact file can be Sharing Contact information with ⏤ Sending Contact information via To assign a key to instantly calling a copied (original left unchanged where it other devices Bluetooth is) or moved (original is deleted) Contact’s number: • Pair the MP02 with the other device. between the MP02’s memory and the A Contact’s information can be sent to or (For more information about • From the Main menu select Settings, SIM card. The SIM card can only store a from someone else’s phone (or similar Bluetooth see p 28.) then Preferences, then Shortcuts. Contact’s name and phone number; if a device), either in a text message (SMS) or • Press the Contacts key. • Select a number key and then Call Contact is moved to it, all other via Bluetooth. contact. information will be lost. The direction • Select a Contact, then Options, then ⏤ Sending Contact information via a that a Contact file is copied or moved is Share via Bluetooth. • Select a Contact, and if necessary a text message (SMS) specific number. automatically defined by where the • Follow the on-screen instructions. original file is located. • Press the Contacts key. Receiving Contact information via The “1” number key is reserved for • Select a Contact, then Options, then ⏤ Copying Contacts calling the voicemail service. For more ⏤ Share via SMS. A text message will be Bluetooth information on Shortcuts, see p 29. • Press the Contacts key. shown, containing the Contact’s • Pair the MP02 with the other device. information (delimited by (For more information about Copying and moving Contacts • Select a Contact. semicolons). Bluetooth see p 28.) between the MP02’s memory and • Select Options, then Copy to • • On the other device, choose which phone/SIM. Press the Down key to open the the SIM card Options menu. Contacts to send, and then send. Moving a Contact Contact files can be stored in the MP02’s ⏤ • Select Send and then select one or • An incoming file
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 36 Contacts III
Backing up Contacts The backup file can be copied to a o Double-click on the MP02 icon that Copying a Contacts .vcf file from a A copy of the MP02’s contacts list should Windows or Mac computer. If copying to will have appeared, and then on computer to the MP02 be created and copied to a computer on a the latter it must have Android File “Storage”; locate the “Contacts” This is the procedure to follow if it is regular basis. This means that if the Transfer installed (or a similar folder. (The path is This PC\MP necessary to restore the MP02’s phone is damaged, lost or stolen, or application that can transfer files to/from 02\Internal shared storage\Contacts) an Android device). Contacts. It can also be used for needs to be reset, all but the most recent o Copy the correct vCard file from the importing new Contacts from a different contact information can be recovered. A USB-C to USB-A cable (supplied) is Contacts folder to an appropriate source, for example another phone or the needed for connecting the MP02 to the destination on the computer. Delete It is also a good idea to copy of the computer itself. Contacts list before making major computer. it on the MP02 (optional). The entire contents of the vCard file will changes to it on the MP02, in case a Creating a Contacts .vcf file on the o Follow the computer’s required procedure for disconnecting the be added to the MP02’s Contacts list. If it mistake is made and information needs MP02 to be recovered. This copy can simply be MP02. is not empty, take appropriate steps to • prevent duplicate entries. left on the MP02, or deleted by accessing Press the Contacts key, and select • Copying to a Mac computer: it from a computer. Manage contacts. • Connect to the computer by o Open Android File Transfer (or an following the procedure above. The backup process consists of two • Select Backup contacts, and then select equivalent). stages: creating a portable file on the Yes. This will cause a .vcf file to be • Copy the vCard file into the MP02’s o Look for a folder called “Contacts” at created on the MP02. Contacts folder. MP02, and then copying it onto a root level; locate the vCard file. computer. • Press the Contacts key, and select Copying the Contacts .vcf file to a o Use the file transfer program to Manage contacts, then Restore contacts. Backup files are created in vCard format computer locate the vCard file and copy it to an (.vcf – Virtual Contact File). Each file is appropriate destination on the • Select the vCard file that has just given a name according to the current • Use a USB-C to USB-A cable to been copied across, and then select connect the MP02 to a suitable computer. Delete it on the MP02 date and time, preceded by “Punkt”. For (optional). Yes. example, a backup file computer (see above). o Follow the computer’s required created on 12th September 2018 at • Open the Status menu, and select USB connection, then select Sync mode. procedure for disconnecting the 14:35:07 has the name MP02. • Copying to a Windows computer: “Punkt20180912143507”.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 37 Calls I
The radio antennae Making a call ⏤ To call a Contact • Press the Contacts key. are located at the ⏤To make a call by entering the recipient’s phone number directly • Highlight the desired Contact.
top corners and the • Enter the number by using the keypad. • If the Contact has multiple phone bottom edge of the • Press the Call key. numbers, scroll to highlight the desired If preferred, a country calling code can be number. MP02. For optimal inserted by entering at least one digit of the • Press the Call key. network connection phone number and then scrolling down to ⏤ To call a number that is stored in the select Add country code. Locate the country by phone’s Call History and maximum entering the first letter or two of its name. • Press the Call key.
battery life, avoid • Highlight the desired number or Contact, covering these areas and press the Call key. during calls. Speed-dial numbers The “1” key is for calling voicemail, as The number keys can each be allocated a indicated by its audio-tape symbol. For more phone number, which can then be called with information about accessing voicemail, see a single touch. This set up via the MP02’s page 40. Shortcuts feature.
• For information about assigning speed-dial numbers, see page 36.
• To call a speed-dial number, press and hold the applicable number key.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 38 Calls I
Receiving a call when to have the Reminder appear. ⏤ Turning the network provider’s Call For more information about Waiting service on or off When a call is received, the screen will Reminders, see p 50. light up, the ringtone will sound (unless • From the Main menu, select Settings, its volume is set to zero), and the • To reject a call and block the caller’s then Calls, then Call waiting. number, press the Down key and vibration alert will be triggered (unless it • Select Activate or Deactivate. select Block number. has been deactivated). For more • Use Query status to check that Call information about the ringtone and Using phone-based automated Waiting is functioning. vibration alert, see p 23. services ⏤ Dealing with an incoming call while on • To answer an incoming call, press the a call already Call key. If a Pay As You Go management service, an automated switchboard, a voicemail • To answer the new call, press the Call • To reject a call, press the End key. service, a telephone banking system or key. • To silence the ringtone and still the similar requires the user to press keys on • To see other options, press the Down vibration alert, press the Down key their phone during a call, and a text key. and select Silent. (Nothing else will message is received at the same time, ⏤ Making a new call while on a call change: the caller will continue to hear clear the screen by opening the Options already a ringing tone and the call can still be menu and selecting Dismiss. answered in the usual way.) • Highlight a number in the Contacts, Ending a call and press the Call key. The first call • To reject a call but send a text will be put on hold. message to the caller, press the Down • To end a call, press the End key. key, select Send message, and then Two calls simultaneously • To switch between the two calls, press either select one of the template the Down key and select Swap calls. messages or New message, write a The MP02 is capable of handling two calls ⏤ Putting a call on hold message and press the key to send at once, if the network provider offers a • To put a call on hold, press the Down it. Call Waiting service. During a phone call a second call can be begun or an incoming key and select Hold. • To reject the call and set a Reminder call accepted. • To resume the call, press the Call key. to call back, press the Down key and select Remind me, and then choose
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 39 Calls II
Voicemail • The access number will now be called. Diverting incoming calls automatically – use the Down key to Voicemail allows callers to leave a voice Follow the network provider’s The network provider’s system can scroll through it to access menu message when their call is not answered, automated instructions for setting up usually be set to divert calls to another options below. and using their voicemail service. or when the MP02 is switched off or out number, or to their voicemail service. • Select Update to send the number to of network coverage. It is handled by the • Press the End key to finish the call. Contact them for more information on the network provider. Alternatively, network provider. this. press the Back key or select Cancel to To turn voicemail on or off, set an The following situations can be set to exit the procedure and leave the outgoing message for callers to hear, trigger a call diversion. network provider’s settings listen to incoming messages, etc., it is unchanged. • When a call is not answered. necessary to call a voicemail access phone ⏤ Activating/deactivating call diversion number that is specific to the network • When the MP02 is busy on another • Use the Down key to scroll through provider. Contact them for more call. the destination phone number, and information about how to use this • When the MP02 is unreachable select Turn on or Turn off. service. (switched off or out of network • Call diversion can be turned off The network provider’s voicemail coverage). completely by selecting Cancel all number can be saved in the MP02 for • All calls. diversions. instant access to voicemail services. Setting up call diversion ⏤ ⏤ Confirming call diversion ⏤Setting the voicemail access number • From the Main menu, select Settings, • To check with the network provider • From the Main menu, select Settings, then Calls, then Divert calls. then Voicemail. that call diversion is functioning, • Select a trigger situation, as described select Cancel all diversions, then Query • Enter the network provider’s above. status. (No settings will be changed.) voicemail access phone number. • Enter the destination number, either ⏤ Accessing voicemail manually or from the Contacts list. If • From the Home screen, long-press there is already a number entered – the “1” key (marked with a symbol the network provider’s voicemail that represents audio tape). number may have been set
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 40 Calls II
Call history It is possible to view a list of calls that have • Pressing the key will bring up a list of been made or received, including missed options: call the number, send a text calls. message, add the number to the MP02’s Contacts list or amend its associated • From the Home screen press the Call key. information if already entered, or delete • Callers will be identified by their phone this call from the Call history. A full list number, or their name if they are in the of calls made to/received from that caller MP02’s Contacts list. A small number in a can be viewed by selecting the top entry circle will show how many times a call has in this sub-menu. been made to or received from that caller.
• To make a call to a number listed, select it and press the Call key again.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 41 Calls III
Call volume levels Muting the microphone Putting calls on hold
• From the Main menu, select Settings, then • From the Options menu, select Mute. When a call is on hold, neither party can Sounds, then Calls volume. • To cancel, select Mute again. hear the other. To put a call on hold, press • Use the Up and Down keys to make the Call key. To resume the call, press it callers’ voices louder or quieter, for both Using external audio equipment (e.g. again. an earpiece or an in-car system) the main speaker and the hands-free Showing/hiding phone number on speaker. ⏤ Connecting via Bluetooth outgoing calls • Press the End key or the Back key to exit. • While on a call, press the Back key until When a call is made, the caller’s phone ⏤ Adjusting the volume during a call the Home screen is displayed. number (“caller ID”) is normally made • Open the Options menu and select • From the Status menu, select Bluetooth is visible to the recipient. Volume. off. Depending on the network provider, it is • Make the desired adjustment by pressing • Choose a connected Bluetooth device, or usually possible to prevent this from the Up and Down keys. Long-press for search for devices. happening – this is known as “hiding caller accelerated adjustment. • Press the Back key to return to the Home ID”. • Press the key to exit. screen, and a second time to return to the screen displaying the current call. ⏤ To hide caller ID Using the hands-free speaker • From the Main menu, select Settings, then • To switch back to the MP02’s built-in • During a call, open the Options menu and speakers, select Switch audio. Calls, then Caller ID. select Turn speaker on. • Select the desired option. Set by network ⏤ Connecting via USB • If additional numbers have been entered will defer to the network provider’s during the call, e.g. for navigating an The supplied USB-C earpiece, or another settings. automated switchboard, these will need to compatible product, can be plugged directly be cleared first. This can be done by into the MP02’s USB socket. pressing the Back key; the call connection will not be affected.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 42 Part three
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 43 Clock features
Alarm • Select whether the alarm is to sound inactive. World Clock once only within the next 24 hours, or The MP02’s alarm clock can be • Select an option: Turn on/off, Delete or The MP02’s World Clock feature allows on a regular basis as desired, by programmed with multiple settings, and Edit. the user to quickly find out the current scrolling and then pressing the key. uses the powerful hands-free loudspeaker If an alarm is already set, its time in other parts of the world by in combination with the vibrating alert • A Notification will be created, stating Notification can be used to directly creating a list of designated locations. feature. It is unaffected by the MP02’s when the alarm is set to go off. The access the Alarms section of the MP02. ⏤ Setting world locations Silent mode and general volume setting; alarm can be modified by clicking on Silencing the alarm it does not function when the phone is the Notification. ⏤ • From the Main menu, select Clock, • When the Alarm is sounding, press then World Clock, then Add location. switched off. ⏤ To select a different time zone the End key to silence it (or the Back • Choose whether to specify a location Ensure that the MP02 has sufficient • From the Main menu, select Settings, key to activate the snooze feature). via a map or a list of city names. If battery life when setting the alarm. then Date and Time. Alternatively, press the Down arrow using the map, first use the Up and ⏤ Creating a new alarm setting • The current time zone will be and choose Stop or Snooze. Down keys to highlight a region and displayed within the menu. • From the Main menu, select Clock, • If the snooze feature is activated, the press the key to expand it. Next, then Alarm, then New. • To change this, select it and then alarm will sound again after ten use the Up and Down keys again to highlight a city and finish by pressing • Use the number keys or the Up and move across the map by using the Up minutes. the key. Down keys to enter the desired time, and Down keys. It has been clearly shown that the best way and to specify AM or PM if applicable. • When the required time zone is to sleep effectively is to use a dedicated alarm • The newly-selected city will appear in Use the and Back keys to move indicated, exit by pressing the key. clock, rather than a phone, and to not use a the list of countries within the main between the settings and then to World Clock page. It is possible to Using previously-defined alarm snooze option. While the MP02 is much less move through to the next step. ⏤ have cities that share a time zone on settings of a disturbance to sleep than a smartphone the list together. (If a city cannot be • Alternatively, from the Home screen, is, like any phone its alarm feature should • From the Main menu, select Clock, enter the desired alarm time in ideally just be used as a travel alarm clock selected, this means that it is already then Alarm. 24-hour clock format (even if the and for situations other than waking up from on the list.) • phone is set to 12-hour format) and Select the desired alarm setting. sleep. • To remove a city from the list, select it select Set alarm. Settings that are marked with a filled and then select Delete. A Delete All circle are set to go off, settings that option is available at the top of the list. are marked with an empty circle are Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 44 Clock features
Timer will reopen the Timer window. The Timer feature is a countdown alarm; • To stop the countdown and either set at the end of the specified length of time a new time or return to the Clock an audio signal will sound (unless the menu, select Reset or Cancel from the MP02’s Master Volume has been set to Options menu.
zero or Silent mode has been activated). • When the countdown has finished, ⏤ Setting the Timer press the End key or select Dismiss or Cancel from the Options menu. • From the Main menu, select Clock, then Timer. Stopwatch
• Use the number keys or the Up and The stopwatch feature allows the user to Down keys to specify the length of measure how long something lasts. time before the audio signal sounds. ⏤ Setting the Stopwatch Use the and Back keys to move between the individual settings. • From the Main menu, select Clock, then Stopwatch. • Press with the seconds highlighted to begin the countdown. • Press the key to start the Stopwatch. • Alternatively, from the Home screen, enter the desired countdown time • Pressing the key again will pause (e.g. 12345 for 1 hour, 23 minutes and and then restart the Stopwatch. 45 seconds) and select Set timer. • To reset the time back to zero, first pause the Stopwatch and then press • The Timer feature can be exited while still in operation by pressing the End the Back key. key (or the Back key); the countdown • Unlike with the Timer, pressing the will continue and a Notification will End key when the Stopwatch is be set, showing how much time running will close it completely and remains. Selecting this Notification delete its reading.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 45 Calendar
The MP02 has a simple reference Calendar. It allows the user to ascertain which dates correspond with which days of the week, and which ISO week number a specific date is in. One month is displayed at a time; week numbers are shown on the left of the screen.
The Calendar is accessed via the Main menu. Use the Up and Down arrows to move between months. To be reminded of an event on a specific date, use the MP02’s separate Reminder feature. More information about Reminders can be found on p 50.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 46 Calculator
The MP02’s Calculator is accessed via the Main menu. Numerals are entered by using the keypad in the normal way. The symbols for plus, minus, divide and multiply (+ - / x) are entered by pressing the Star key. Brackets, percentage sign and decimal point are entered by pressing the Hash key. Press the applicable key repeatedly until the desired symbol is shown. Press the key to show the result of the calculation. To clear the screen, press the Down key and then select Clear. A brief reminder text on how to access the mathematical symbols can also be accessed via the Down key.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 47 Updating the operating system
The MP02 uses a system called OTA ⏤ Connecting to the Wi-Fi network process may take several minutes. ⏤ Disconnecting from the Wi-Fi (“Over The Air”) for ascertaining network • From the Main menu, select Settings, • Important: the MP02 may appear to be whether its operating system is up to date then Connectivity, then Wi-Fi. switched off – do not try to switch it If there is no new software available, or it and for downloading newer versions. on at any time. However, if the Wi-Fi is is not a convenient time to download and • Select Turn on. The procedure requires access to an unsuitable, the MP02 may simply install it, end the Wi-Fi connection by external Wi-Fi network. (This has • Choose the relevant Wi-Fi network continue to display the message returning to the Wi-Fi menu (see above) nothing to do with the MP02’s ability to from the list available and press the “Downloading” without anything and selecting Turn off. provide Internet access to a second key. Alternatively, manually add a new actually happening. If this message is device via a 4G service and its own Wi-Fi network to the list. displayed for 30+ minutes, switch the tethering feature.) • Use the keypad to enter the correct MP02 off and then back on again. If possible, avoid public Wi-Fi services. As Wi-Fi password and press the key. Make another attempt with a different Wi-Fi connection, preferably a private well as potential security vulnerabilities, • The MP02 should now indicate that it these services often require the user to is connected, with signal strength office or home. log in on-screen (e.g. register, agree to shown. • When the installation process is terms & conditions of use, etc.) and this finished, the MP02 will automatically ⏤ Checking for updated software is not possible with the MP02. Other restart. technical difficulties can arise as well. • From the Main menu, select Settings, then About, then Firmware. • If the passcode feature has previously ⏤ Preparation been activated, it will need to be • Select Check for updates. (Look out for entered as part of the phone’s • Ensure that the MP02 has at least 30% a message that may briefly appear, if battery charge. restarting process. The same applies there is a problem with the Wi-Fi for the SIM PIN. • If using a public Wi-Fi service, check connection.) that it is possible to access it directly • If the MP02 reports that new software without any kind of on-screen activity. is available, to install it select Yes and • If phone passcode or SIM PIN then press the key to confirm. protection is activated (see p 20), • The MP02 will now start downloading ensure that the correct passcode is and installing the new software. This available. Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 48 Providing Internet access
The MP02 can be used to provide cancel this process, repeatedly press The external device can now connect another device (e.g. a tablet or laptop the Back key (the network name or with the MP02 via Wi-Fi, Bluetooth or computer) with an Internet connection, password will be deleted from the USB. USB is the fastest, and also uses via 4G (LTE). screen, but this will have no effect on the least battery power (in each device); This linking process is called tethering. what is saved in the phone). it will usually require software to be Most mobile phone contracts permit it, Alternatively, press the Up or Down installed in the second device. but some do not; contact the network key repeatedly. service provider for more information if • The security protocol is WPA2 PSK; required. this cannot be changed.
⏤ To make the MP02’s Internet • Tethering can also be quickly turned connection available to other devices on or off via the Status menu.
• From the Main menu, select Settings, • The MP02’s OTA Wi-Fi connection then Connectivity, then Tethering. feature (as used for connecting to an external Wi-Fi router for • Select Turn on. downloading new software) will • If desired, the MP02’s network name automatically switch off when and password can be changed. To tethering is activated.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 49 Notes
About Notes Creating a Note Amending a Note
If desired, a Reminder can be • From the Main menu, select Notes, then • From the Main menu, select Notes, and added to a Note. This will cause New note. then the Note that is to be amended. an alarm signal to sound, and the • Use the keypad to enter the desired Note will appear on the screen information. (See p 30 for information • Open the Options menu and select Edit for a few seconds. Until this about text entry.) and/or Add reminder. happens, the Note/Reminder will be referenced in the • Open the Options menu by pressing the • Make the desired changes and save as Notifications list; selecting it Down key, and select Save. before. (Any previous Reminder will be will open the Notes section. Adding a Reminder deleted if a new one is created.)
• Open the Options menu by pressing the Deleting a Note Down key. • From the Main menu, select Notes, and • Select Add reminder. then the Note that is to be deleted. • Specify the desired day/date and time (including AM/PM if applicable). Use the • Open the Options menu by pressing the key and the Back key to move left and Down key, and select Delete. right, and the key to save the settings. Viewing a Note
• From the Main menu, select Notes, and then any Note on the list.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 50 Text messages (SMS) I
Texting on the MP02 Composing and sending a message Incoming messages Message threads
The MP02 has a minimalist texting • Press the Message key. • When a message is received, its sender • Message threads can be accessed via system; its focus is on making phone will appear at the top of the list of the list that appears when the • Select New message. calls, which are generally more efficient. messages that is shown when the Messages key is pressed. • Select a recipient from the Contacts Messages key is pressed. It will have a It’s often useful to explain to other • To view a thread, select the sender. list (if necessary, use the Search number in a circle next to it, people that calls are preferred, for feature by entering the first letter or Use the Up and Down keys to scroll instance when exchanging contact details. representing how many unread through the series of messages – each two of a Contact’s name). If the messages from that sender there are. Nevertheless, texting can be useful when Contact has multiple numbers, select message will expand in turn – and also there is limited signal coverage, low one from the list. • A Notification will be created and to scroll through the messages battery charge, in a noisy (or very quiet) (depending on what is happening with themselves if they are too long to fit • Alternatively, select Add number to environment, etc. the phone at the time) a full-screen on the screen. enter a phone number manually (press announcement will appear. Messages are grouped into threads. This the key after this is done). • To expand a single message, press the means that all messages sent to and • The message can be opened by l. key while it is highlighted. Press the • Write the message, and press the selecting the Notification, by pressing Back key to return to the message received from the same number/Contact key when finished. are presented together in chronological the key while the full-screen thread. order, newest at the bottom. Sent • Check that the recipient is correct and announcement is showing, or by messages are shown on the right of the – with the recipient highlighted – press pressing the Messages key and screen and received messages are shown the key. The message will now be selecting the sender in the list of on the left. sent. Messages that will appear. See p 11 for information about using the • If there is a problem with sending the • The Notification can be exited by MP02’s keypad. message (e.g. lack of mobile signal), it pressing the End or Back key; the will be saved as a draft message and a full-screen announcement can be Notification will be created, offering dismissed in the same way, or by the option of retrying. selecting Dismiss in the Options menu.
• The sender of the message can be called by selecting their message in the list and pressing the Call key.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 51 Text messages (SMS) I
Replying to a message Forwarding a message • Select Delete, and then select Yes to (See p 11 for information about using confirm. the MP02 keypad.) • Press the Messages key and select a • Select a single message from a thread, message thread. as described previously. ⏤ Deleting a whole message thread • Open the Options menu by long-pressing the Down key to reach • Enter text in the “New message” box • Open the Options menu and select • Press the Messages key. the end of the text and then pressing (see p 11 for information about using Forward. • Select a Contact/phone number from it again. the MP02 keypad) and press the Down • Add a recipient from the Contacts list the Messages menu. • Select Save, or to cancel press the End key to access the Options menu. and/or by manually entering a phone • When the thread appears, open the key. • With the name of the recipient number. Recipients will be marked Options menu and select Delete highlighted, press the key again. with a filled circle; remove them by thread, and then select Yes to confirm. ⏤ Creating a new template selecting them again. • From the Messages Menu, select • The reply will now be sent, and a copy Using message templates will appear at the bottom of the • Select Save. Templates and then New template. Message templates are pre-composed message thread. • Enter the required text. • Check the recipient(s) and press the pieces of text that can be used as or • To add recipients, select Edit recipient. key. inserted into text messages. The MP02 • With the cursor at the end of the Select Contacts as required, and/or • The message will now be saved. comes pre-loaded with a small collection entered text (long-press the Down key highlight Add number and enter a if necessary), open the Options Menu Deleting messages of templates; these can be edited and phone number manually. Recipients of saved for future use in their amended for, and select Save. To abandon the this message will be marked with a ⏤ Deleting a single message and new templates can be created. process, press the Back key or select filled circle; pressing the key while Delete. • Press the Messages key. Templates can also be deleted if no longer a recipient is highlighted will required. ⏤ Deleting a template alternately remove them from and • Select a Contact/phone number from return them to the list. the Messages menu. ⏤ Editing an existing template • From the Messages Menu, select • Open the Messages Menu by pressing Templates, and then select a Template • The other available options are to save • Select the message to be deleted from to delete. the reply as a draft for working on within the thread that appears, as the Messages key. • later, inserting text from a template, described above. • Select Templates, and select a Press the Down arrow to open the Options Menu, select Delete, and then and deleting the entire thread. • Open the Options menu. Template to edit. select Yes to confirm. • Add, delete or change text as desired.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 52 Text messages (SMS) I
⏤ Using a template in a text message existing one have an extra phone • The detected phone number(s) will be another device, for example a computer number added. visible in the list, alongside Save as that is set up to receive SMS-format • While composing a message, with the note. messages. cursor at the end of the text ⏤ Using the content of a Message in a (long-press the Down key if Note • Select the phone number. necessary), open the Options Menu • Select an individual Message. • From the menu that appears, select and select Template. Save to create a new Contact or add • Press the key again (or open the • Select the desired Template. Options Menu and select Use content, the number to an existing Contact, Send message, or Call. • The Template text will appear in the then Save as note). new message, inserted at the end of • From the Options Menu, add a Alternatives to backing up any text that may already be there. Reminder if desired, and then select It is not possible to export backup copies • Multiple templates can be inserted, if Save. The process can be cancelled by of text messages from the MP02. desired. selecting Delete (the original message Texting is not an efficient way of sending will not be affected); it is also possible Using the content of a text important information that may need to to exit by pressing the End key be archived. Email is far superior for this message (long-pressing to jump to the purpose: it is easier to work with The contents of a text message can be beginning of the text). efficiently, attachments can be added, it is extracted and used in the following ways. ⏤ Using a phone number that is more readily available on a full-size • The entire message can be forwarded enclosed within a Message screen, and if required it can easily be
to different recipient (or multiple • Select the Message, as described printed out in a way that displays recipients). above. information about its sender. SMS
• messages can often be intercepted en An enclosed phone number can be • If a phone number (or multiple phone route between sender and recipient; if called. numbers) is/are detected, they will be confidentiality is important, encrypted • A Note can be created from some or underlined and rendered in green. email should be used. all of the content of the message, with • Open the Options Menu, and select The content of a text message can be a Reminder if desired. Use content. archived by forwarding text messages to • A new Contact can be created, or an
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 53 Part four
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 54 Appendix 1
Regulatory information Operation is subject to the following two Radio frequency band information conditions: (1) This device may not cause The information in this document is harmful interference, and (2) this device provide “as is” without any obligation, must accept any interference received, Cellular Network Wi-Fi representations or warranties- express including interference that may cause or implied. Punkt. reserves the right to Maximum output Maximum output undesired operation. Frequency band Standard / Frequency amend or update information at any power power time and without prior notice. To ensure that interference stays within 2G (GSM) 850 ² / 900 acceptable levels, appropriate cables and 33 dBm 802.11b / 2.4~2.4835 17.57 dBm ¹ Information about regulatory ¹ accessories must be used. 2G (GSM) 1900 ² / GHz 14.18 dBm ² 30 dBm requirements and guidelines relating to 1800 ¹ 17.28 dBm ¹ the MP02 can be found by opening the RF Specific Absorption Rate (SAR) 3G (WCDMA) 802.11g / 2.4~2.4835 24 dBm GHz Main menu and selecting Settings, then The MP02 meets international guidelines B1/5/6/8/19 ¹ 13.40 dBm ² 3G (WCDMA) About, then Regulatory. Further 24 dBm 16.76 dBm ¹ for exposure to radio waves. To reduce B1/2/4/5/8 ² 802.11n20 / 2.4~2.4835 information can also be found at GHz exposure to electromagnetic radiation 4G LTE (FDD) 13.04 dBm ² 23 dBm punkt.ch. during communication, a hands-free B1/3/5/7/8/19/20 ¹ 802.11n40 / 2.4~2.4835 14.98 dBm ¹ CE (EU) compliance statement: option such as the built-in speakerphone 4G LTE (FDD) 23 dBm GHz 12.91 dBm ² Punkt Tronics AG declares that the or the included earpiece can be used. B1/2/4/5/7/12/17 ² MP02 complies with Radio Equipment The maximum specific absorption rates Directive 2014/53/EU. for the MP02 when either held to the ear Bluetooth FCC and ISED Canada compliance or attached to a body-mounted holder are statement: below. Maximum output Standard / Frequency This device complies with Part 15 of the power SAR Regulator Head Body FCC Rules. This device complies with (W/kg) y limit 4.1 / 2.4 GHz 3.3 dBm ISED Canada RSS standard(s) for Over 1 g 1.389 1.286 1.6 permit-free devices and CAN-ICES-3 (FCC/IC) ¹ UE, JAPAN, AUSTRALIA (B)/NMB-3(B). Over 10 g 1.215 1.750 2.0 (CE) ² USA, CANADA
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 55 Appendix 2
Trademarks
© 2018 Punkt. Tronics AG. All rights reserved. “Punkt.” and the Punkt. logo are registered trademarks owned by Punkt. Tronics AG. The MP02 is a registered product design.
Trademarks, including but not limited to BLACKBERRY, BLACKBERRY SECURE, EMBLEM Design and BLACKBERRY SECURE Design, are the trademarks or registered trademarks of Blackberry Limited, used under licence, and the exclusive rights to such trademarks are expressly reserved.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Wi-Fi is a trademark of the Wi-Fi alliance.
All other trademarks are property of their respective owners.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 56