THE BEST SOLUTION FOR AND ODOUR PROBLEMS!

ETP Comfort large A single room air handling unit with heat recovery for balanced energy saving single room ventilation in flats, cottages, social and commercial premises.

FEATURES

- clean fresh air supply to the premises - stale extract air removal from the premise - cost-effective energy solution - remote control - easy mounting - non-stop operation - very suitable for renovation - silent operation (22-29dBA)

CASING Polymer coated metal casing decorated with The unit incorporates a high-tec plate counter-flow mirror stainless steel. Modern unit design makes polystyrene heat exchanger. The use of a ETP Comfo it match well with any interior. Removable front panel large unit is cost saving because the saves provides easy access for the unit servicing heat in the winter and cool in summer.

HEATER EC MOTORS The unit is equipped with a ceramic heater High efficient EC motors have built-in which is used to warm up supply air up to protection and ball bearings for longer the confortable air temperature. service life. Due to EC technologies de ETP comfort large is featured with low energy demand and reliable operation. AIR FILTRATION FREEZING PROTECTION Two G4 built-in filters provide cleaning The air handling unit ETP comfo large is equipped with a of supply and extract air. The filters built-in freezing protection. The electronic freeze serve to ensure supply of fresh air protection is applied to prevent condensate freezing free of dust, insects and protect the during cold outside temperatures. unit from soiling.. OPERATING LOGIC

The intake air from outside flows through the filter and the heat exchanger ans is supplied to INTAKE AIR teh room with the supply centrifugal . Warm EXHAUST AIR stale air from the room flows through the filter and the heat exchanger and is exhaus- ted outside through the wall by the exhaust SUPPLY FILTER . In the heat exchanger heat energy ow warm extract air from the room is transferred to clean cold air flow from outside. Heat exchange results in minimization of heat EXTRACT FILTER losses and lower heating costs. The extract and supply air flows are fully separated, so no contaminations, odours and microbes tome to EXTRACT AIR SUPPLY AIR supply air flow.

HEAT EXCHANGER

TECHNICAL DATA

Model Mode Voltage(V) Power Heater Current Air Heat RPM Noise (W) power max.(A) capacity recovery level at 3m Protection (W) (m³/h) efficiency (dBA) 1 9 60 92% 450 30 Large 2 230/50 Hz 16 350 1,68 105 87% 780 35 IP 22 3 40 150 82% 2000 38

DIMENSIONS

500

260 Ø125 580

200

Elek Trends Productions nv - Rue des Bengalis 4 - BE - 7700 Moeskroen - Tel.: +32 (0)56 48 15 90 - Fax.: +32(0)56 48 15 91 E-mail : [email protected] - E-mail : [email protected]