A Guide to the Food Safety Standards (Third Edition, November 2016)

Total Page:16

File Type:pdf, Size:1020Kb

A Guide to the Food Safety Standards (Third Edition, November 2016) SAFE FOOD AUSTRALIA 3rd Edition, November 2016 A Guide to the Food Safety Standards Chapter 3 of the Australia New Zealand Food Standards Code (applies to Australia only) SAFE FOOD AUSTRALIA A Guide to the Food Safety Standards Chapter 3 of the Australia New Zealand Food Standards Code (Australia only) Standard 3.1.1 – Interpretation and Application Standard 3.2.2 – Food Safety Practices and General Requirements Standard 3.2.3 – Food Premises and Equipment Third Edition, November 2016 II FOOD STANDARDS AUSTRALIA NEW ZEALAND SAFE FOOD AUSTRALIA FOOD STANDARDS AUSTRALIA NEW ZEALAND SAFE FOOD AUSTRALIA © Food Standards Australia New Zealand 2016 ISBN: 978-0-642-34593-6 Published November 2016 Food Standards Australia New Zealand (FSANZ) supports and encourages the dissemination and exchange of information. Information in this document is provided under a Creative Commons Attribution 3.0 Australia (CC BY 3.0) Licence, except for the Food Standards Australia New Zealand logo. An electronic version of this work is available on the FSANZ website at www.foodstandards.gov.au. Attribution You may copy, distribute, transmit and adapt the material in this publication by the CC BY 3.0 licence for commercial and non-commercial purposes; but you must attribute the work in the following manner: © Food Standards Australia New Zealand. This attribution must not, in any way, suggest that FSANZ endorses you or your use of the work. For more information email [email protected] FSANZ Australia FSANZ New Zealand PO Box 5423 PO Box 10559 Kingston ACT 2604 The Terrace, Wellington, 6143 Australia New Zealand Ph: +61 2 6271 2222 Ph: +64 4 473 5630 Fax: +61 2 6271 2278 Fax: +64 4 473 9855 A GUIDE TO THE FOOD SAFETY STANDARDS THIRD EDITION NOVEMBER 2016 FOOD STANDARDS AUSTRALIA NEW ZEALAND SAFE FOOD AUSTRALIA STATUS OF GUIDE III Status and context of the document This document relates to three food safety standards in Chapter 3 of the Australia New Zealand Food Standards Code (the Code). These standards apply only in Australia. They are: 3.1.1 – Interpretation and Application 3.2.2 – Food Safety Practices and General Requirements 3.2.3 – Food Premises and Equipment The information provided in this document is not legally binding. This document was prepared by Food Standards Australia New Zealand (FSANZ) to assist government agencies responsible for enforcing the Code in Australia. State and territory food agencies are primarily responsible for interpretation and enforcement of the Code in Australia. This is because the food standards that comprise the Code are applied in Australia by state and territory food laws. It is the state and territory food laws that make failure to comply with Code requirements an offence. At the Commonwealth level, the Commonwealth Department of Agriculture and Water Resources administers the Imported Food Control Act 1992 (Cth), which applies the food standards to imported food. These agencies work together through the Implementation Subcommittee for Food Regulation (ISFR) to ensure food laws are implemented and enforced consistently. FSANZ prepared and published this document at the request of ISFR. FSANZ is not an enforcement agency and cannot provide advice or guidance on food compliance issues. This document will be reviewed and amended as necessary. Readers may contact the Food Safety and Response Section of FSANZ if they have feedback. Email: [email protected]. Disclaimer Food Standards Australia New Zealand makes no warranty or representation regarding the completeness, accuracy, or currency of any information contained in this document or publication or that such information will be error-free. Food Standards Australia New Zealand does not accept any legal liability or responsibility for any harm, injury, loss, damages, or costs directly or indirectly sustained by any person as a result of any use of, or reliance on, or interpretation of, the information contained in this publication. The information contained in this publication is not and should not be relied upon as legal advice nor be regarded as a substitute for legal advice. Any person relying on this information should seek independent legal advice in relation to any queries they may have regarding obligations imposed under the standards in the Australia New Zealand Food Standards Code. AUSTRALIA NEW ZEALAND FOOD STANDARDS CODE CHAPTER 3 (AUSTRALIA ONLY) IV FOOD STANDARDS AUSTRALIA NEW ZEALAND SAFE FOOD AUSTRALIA FOOD STANDARDS AUSTRALIA NEW ZEALAND SAFE FOOD AUSTRALIA A GUIDE TO THE FOOD SAFETY STANDARDS THIRD EDITION NOVEMBER 2016 FOOD STANDARDS AUSTRALIA NEW ZEALAND SAFE FOOD AUSTRALIA CONTENTS V Contents Status and context of the document III Introduction 1 Using this guide 1 Standard 3.1.1 Interpretation and Application 3 1 Interpretation 4 2 Meaning of safe and suitable food 10 3 General application of the Food Safety Standards 12 4 Compliance 12 Standard 3.2.2 Food Safety Practices and General Requirements 13 Division 1 — Interpretation and application 14 1 Interpretation 14 2 Application of this Standard 18 Division 2 — General requirements 18 3 Food handling — skills and knowledge 18 4 Notification 22 Division 3 — Food handling controls 24 6 Food storage 29 7 Food processing 32 8 Food display 42 9 Food packaging 49 10 Food transportation 52 11 Food disposal 54 12 Food recall 58 Division 4 — Health and hygiene requirements 61 Subdivision 1 — Requirements for food handlers 61 13 General requirement (on food handlers) 61 14 Health of food handlers 62 15 Hygiene of food handlers 65 Subdivision 2 — Requirements for food businesses 72 16 Health of persons who handle food — duties of food businesses 72 17 Hygiene of food handlers — duties of food businesses 74 18 General duties of food businesses 77 Division 5 — Cleaning, sanitising and maintenance 79 19 Cleanliness 79 20 Cleaning and sanitising of specific equipment 80 21 Maintenance 84 AUSTRALIA NEW ZEALAND FOOD STANDARDS CODE CHAPTER 3 (AUSTRALIA ONLY) VI CONTENTS FOOD STANDARDS AUSTRALIA NEW ZEALAND SAFE FOOD AUSTRALIA FOOD STANDARDS AUSTRALIA NEW ZEALAND SAFE FOOD AUSTRALIA Division 6 — Miscellaneous 85 22 Temperature measuring devices 85 23 Single use items 90 24 Animals and pests 92 25 Alternative methods of compliance 95 Standard 3.2.3 Food Premises and Equipment 99 Division 1 — Interpretation and application 100 1 Interpretation 100 2 Application of this Standard 101 Division 2 — Design and construction of food premises 102 3 General requirements 102 4 Water supply 108 5 Sewage and waste water disposal 113 6 Storage of garbage and recyclable matter 114 7 Ventilation 116 8 Lighting 119 Division 3 — Floors, walls and ceilings 120 9 Application 120 10 Floors 120 11 Walls and ceilings 123 Division 4 — Fixtures, fittings and equipment 127 12 General requirements 127 13 Connections for specific fixtures, fittings and equipment 134 14 Hand washing facilities 136 Division 5 — Miscellaneous 142 15 Storage facilities 142 16 Toilet facilities 143 17 Food transport vehicles 144 Appendices 147 Appendix 1: Potentially hazardous foods 148 Appendix 2: The use of time as a control for potentially hazardous food 151 Appendix 3: Limits for food processes 158 Appendix 4: Foods requiring special care 162 Appendix 5: Cooling of meats after cooking 172 Appendix 6: Cleaning and sanitising surfaces and utensils 173 Appendix 7: Pest management 182 Appendix 8: Template examples 183 Appendix 9: Temporary and mobile food premises 191 Appendix 10: Home-based food businesses 204 Resources and References 211 A GUIDE TO THE FOOD SAFETY STANDARDS THIRD EDITION NOVEMBER 2016 FOOD STANDARDS AUSTRALIA NEW ZEALAND SAFE FOOD AUSTRALIA INTRODUCTION 1 Introduction There are five national food safety standards that apply in Australia: • 3.1.1 — Interpretation and Application • 3.2.1 — Food Safety Programs • 3.2.2 — Food Safety Practices and General Requirements • 3.2.3 — Food Premises and Equipment • 3.3.1 — Food Safety Programs for Food Service to Vulnerable Persons. These standards provide a risk-based, preventative approach to providing safe and suitable food. They are based on the principle that food safety is best ensured by implementing food hygiene controls at each stage of food handling and that additional risk management tools, such as food safety programs, may be required for high-risk food industry sectors. Of the five standards, Standards 3.1.1, 3.2.2 and 3.2.3 apply to all Australian food businesses and establish fundamental requirements for minimising food safety risks. Safe Food Australia provides information to assist with understanding the intent of these three standards, including the food safety outcome(s) intended. The information in this document is primarily intended to assist enforcement authorities but it may also be useful for food businesses. Safe Food Australia includes clarifications, examples and recommendations based on scientific evidence and industry best practice. It is not an interpretation of the Australia New Zealand Food Standards Code (Food Standards Code) and is not a legally binding document. The Food Standards Code is enforced in all Australian jurisdictions through state and territory Food Acts. Food businesses needing information on complying with the food safety standards should contact their local enforcement agency for advice. Food safety risks will vary from business to business depending on the nature of the food business and the food handling operations undertaken. For example, factors such as inherent hazards in the food, the potential for contamination during food handling and how the food is processed contribute to food safety risks. Information provided in Safe Food Australia highlights factors that may contribute to these risks at each step of the food handling process. Appendixes also provide technical and practical information. Using this guide • The text of the standards is included in bold type throughout the explanatory sections of the document for convenient reference. The authoritative versions of these standards are on the Australian Government Federal Register of Legislation, accessible from the FSANZ website.
Recommended publications
  • The Risk Management Standard AS/NZS 4360
    BROADLEAF CAPITAL INTERNATIONAL PTY LTD ABN 24 054 021 117 23 Bettowynd Road Tel: +61 2 9488 8477 Pymble Mobile: +61 419 433 184 NSW 2073 Fax: + 61 2 9488 9685 Australia www.Broadleaf.com.au [email protected] Specialists in Strategic, Enterprise and Project Risk Management TUTORIAL NOTES: THE AUSTRALIAN AND NEW ZEALAND STANDARD ON RISK MANAGEMENT, AS/NZS 4360:2004 1 Introduction Dr Dale F Cooper, a Director of Broadleaf, is a founding member of the joint Standards Australia and Standards New Zealand Technical Committee OB-007 that developed the Australian and New Zealand Standard on risk management, AS/NZS 4360:2004 [7], and the associated Handbook [8], and Grant Purdy, an Associate Director of Broadleaf, is currently Chair of the Committee. Dennis Goodwin is also a member of the committee. The Standard was developed in response to a perceived need for practical assistance in applying risk management in public sector and private sector organisations. It has since become one of the most popular Standards in publication, and a range of supporting handbooks has been prepared. At least part of the focus on the importance of risk management and the drive for a Standard was stimulated by the release of the NSW Government Risk Management Guidelines in 1993 [6] and their designation as NSW Government policy for all capital works expenditure above $5 million. Dr Cooper made substantial contributions to the NSW Guidelines, whose structure is very similar to that of the Standard. The approach of the Standard has since been adopted by the Australian Government [2, 3, 4], a range of large public companies [1 , for example] and the UK National Health Service.
    [Show full text]
  • Producing and Sharing Allergen Information a Guide for Early Years Settings in England
    Eat better, start better Producing and sharing allergen information A guide for early years settings in England. Introduction New allergen labelling requirements were introduced in December 2014. This guide outlines the changes and provides information to help you meet them. The new requirements There is no known cure for food allergies. People with allergies need to avoid the foods The new laws require food businesses to which they are allergic. To do this, they including restaurants, cafes, hospitals, early need accurate ingredients information about years settings and schools providing non- the allergens that are present in food and prepacked food to provide information drinks – whether prepacked, or provided by about the allergens present as ingredients an early years setting or other food business. in the food they serve. These requirements are included in EU and UK laws1,2 and apply Early years settings are required to obtain across Europe. information about children’s special dietary requirements – including food allergies and intolerances – before they attend, and record and act on the information provided about Why is it important to provide 4 allergen information? children’s dietary needs. It is important that requests for special In the UK, it is estimated that around 2 diets are handled sensitively and million people (1-2% of adults and 5-8% of appropriately, and this can be included children) have a food allergy.3 This is when as part of a policy, describing how the body’s immune system reacts unusually these are managed, and a procedure to a specific food, because it mistakenly to follow.
    [Show full text]
  • Guidelines for Health Surveillance [Nohsc:7039(1995)]
    GUIDELINES FOR HEALTH SURVEILLANCE [NOHSC:7039(1995)] DECEMBER 1995 1October 1995 2 FOREWORD The National Occupational Health and Safety Commission is a tripartite body established by the Commonwealth Government to develop, facilitate and implement a national occupational health and safety strategy. This strategy includes standards development, the development of hazards- specific and industry-based preventive strategies, research, training, information collection and dissemination and the development of common approaches to occupational health and safety legislation. The National Commission comprises representatives of peak employee and employer bodiesthe Australian Council of Trade Unions and the Australian Chamber of Commerce and Industryas well as the Commonwealth, State and Territory governments. Consistent with the National Commission’s philosophy of consultation, tripartite standing committees have been established to deal with issues relating to standards development, research and the mining industry. Expert groups and reference groups may be established to provide advice to the standing committees on those issues with which the National Commission is concerned. i December 1995 PREFACE The following is a list of the Guidelines for Health Surveillance [NOHSC:7039(1995)] which are published as part of a series by the National Commission: • acrylonitrile; • inorganic arsenic; • asbestos; • benzene; • cadmium; • inorganic chromium; • inorganic lead; • creosote; • isocyanates; • inorganic mercury; • 4,4'-methylene bis (2-chloroaniline)
    [Show full text]
  • Guide to Machinery and Equipment Safety
    Guide to machinery and equipment safety Contents Introduction ................................................................................................................................ 3 Consulting workers and workplace health and safety representatives ...................... 3 1. Key principles of machinery and equipment safety ............................................ 4 1.1 Mechanical hazards ................................................................................................ 4 1.2 Non-mechanical hazards ....................................................................................... 5 1.3 Access hazards ........................................................................................................ 6 Access.......................................................................................................................................... 6 2. Risk control of machinery and equipment hazards ............................................. 9 2.1 Risk control of general hazards ........................................................................... 9 2.2 Risk control of mechanical hazards ................................................................. 10 Guarding .................................................................................................................................... 10 Other mechanical hazard risk control options ................................................................ 13 2.3 Risk control of non-mechanical hazards ........................................................
    [Show full text]
  • TIN CAS Number
    Common Name: TIN CAS Number: 7440-31-5 RTK Substance number: 1858 DOT Number: None Date: January 1986 Revision: April 2001 ------------------------------------------------------------------------- ------------------------------------------------------------------------- HAZARD SUMMARY WORKPLACE EXPOSURE LIMITS * Tin can affect you when breathed in. OSHA: The legal airborne permissible exposure limit * Contact can irritate the skin and eyes. (PEL) is 2 mg/m3 averaged over an 8-hour * Breathing Tin can irritate the nose, throat and lungs workshift. causing coughing, wheezing and/or shortness of breath. * Tin can cause nausea, vomiting, diarrhea and abdominal NIOSH: The recommended airborne exposure limit is pain, headache, fatigue and tremors. 2 mg/m3 averaged over a 10-hour workshift. * Tin can cause "spots" to appear on chest x-ray with normal lung function (stannosis). ACGIH: The recommended airborne exposure limit is 3 * Tin may damage the liver and kidneys. 2 mg/m averaged over an 8-hour workshift. * High exposure can affect the nervous system. WAYS OF REDUCING EXPOSURE IDENTIFICATION * Where possible, enclose operations and use local exhaust Tin is a soft, white, silvery metal or a grey-green powder. It ventilation at the site of chemical release. If local exhaust is found in alloys, Babbitt and similar metal types, and is used ventilation or enclosure is not used, respirators should be as a protective coating and in glass bottle and can worn. manufacturing. * Wear protective work clothing. * Wash thoroughly immediately after exposure to Tin. REASON FOR CITATION * Post hazard and warning information in the work area. In * Tin is on the Hazardous Substance List because it is addition, as part of an ongoing education and training regulated by OSHA and cited by ACGIH and NIOSH.
    [Show full text]
  • Resolving Individual Labour Disputes: a Comparative Overview
    Resolving Individual Labour Disputes A comparative overview Edited by Minawa Ebisui Sean Cooney Colin Fenwick Resolving individual labour disputes Resolving individual labour disputes: A comparative overview Edited by Minawa Ebisui, Sean Cooney and Colin Fenwick International Labour Office, Geneva Copyright © International Labour Organization 2016 First published 2016 Publications of the International Labour Office enjoy copyright under Protocol 2 of the Universal Copyright Convention. Nevertheless, short excerpts from them may be reproduced without authorization, on condition that the source is indicated. For rights of reproduction or translation, application should be made to ILO Publications (Rights and Licensing), International Labour Office, CH-1211 Geneva 22, Switzerland, or by email: [email protected]. The International Labour Office welcomes such applications. Libraries, institutions and other users registered with a reproduction rights organization may make copies in accordance with the licences issued to them for this purpose. Visit www.ifrro.org to find the reproduction rights organization in your country. Ebisui, Minawa; Cooney, Sean; Fenwick, Colin F. Resolving individual labour disputes: a comparative overview / edited by Minawa Ebisui, Sean Cooney, Colin Fenwick ; International Labour Office. - Geneva: ILO, 2016. ISBN 978-92-2-130419-7 (print) ISBN 978-92-2-130420-3 (web pdf ) International Labour Office. labour dispute / labour dispute settlement / labour relations 13.06.6 ILO Cataloguing in Publication Data The designations employed in ILO publications, which are in conformity with United Nations practice, and the presentation of material therein do not imply the expression of any opinion whatsoever on the part of the International Labour Office concerning the legal status of any country, area or territory or of its authorities, or concerning the delimitation of its frontiers.
    [Show full text]
  • Acdp-M-Bovis-Working-Group.Pdf
    1 Report of the Advisory Committee on Dangerous Pathogens, Mycobacterium bovis Working Group Introduction Bovine tuberculosis (bTB1), caused by Mycobacterium bovis (see Appendix 1), poses a significant and growing animal health and economic problem in the UK. Although historically an important zoonosis, and still so in many parts of the world, a combination of pasteurisation of milk (raw milk is the main source of human infection (de la Rua-Domenech, 2006)) and regular testing of cattle, and culling of those found to test positive on herd screening, has reduced the zoonotic risk enormously, such that bTB is no longer seen as a major zoonotic problem in the UK. However, the number of ‘reactor’ cattle (i.e. cattle testing positive for bTB) slaughtered each year has risen in recent years from 5,200 in 2001 to more than 30,000 per year (National Statistics, 2014). Furthermore, although the number of human cases diagnosed in the UK each year is small, the death in 2013 from bTB of a person who had worked in an abattoir raised the issue of a potentially growing risk of occupational infection. In November 2013, this issue was brought before ACDP, who agreed to set up a Working Group with the purpose of assessing the risks of M. bovis exposure and transmission to those who work in abattoirs and similar facilities handling cattle known or suspected to be infected with M. bovis. The Working Group was tasked with producing a report for ACDP that would provide an evidence base for future ACDP guidance on risk and risk management options in abattoirs dealing with cattle to be applied in this particular occupational setting.
    [Show full text]
  • An Evaluation of the Uk Food Standards Agencys Salt
    HEALTH ECONOMICS Health Econ. 22: 243–250 (2013) Published online 6 January 2012 in Wiley Online Library (wileyonlinelibrary.com). DOI: 10.1002/hec.2772 HEALTH ECONOMICS LETTER AN EVALUATION OF THE UK FOOD STANDARDS AGENCY’S SALT CAMPAIGN BHAVANI SHANKARc,*, JOSE BRAMBILA-MACIASa, BRUCE TRAILLa, MARIO MAZZOCCHIb and SARA CAPACCIb aUniversity of Reading, Berkshire, UK bUniversity of Bologna, Bologna, Italy cLeverhulme Centre for Integrative Research on Agriculture and Health and School of Oriental and African Studies, University of London, London, UK ABSTRACT Excessive salt intake is linked to cardiovascular disease and several other health problems around the world. The UK Food Standards Agency initiated a campaign at the end of 2004 to reduce salt intake in the population. There is disagreement over whether the campaign was effective in curbing salt intake or not. We provide fresh evidence on the impact of the campaign, by using data on spot urinary sodium readings and socio-demographic variables from the Health Survey for England over 2003–2007 and combining it with food price information from the Expenditure and Food Survey. Aggregating the data into a pseudo-panel, we estimate fixed effects models to examine the trend in salt intake over the period and to deduce the het- erogeneous effects of the policy on the intake of socio-demographic groups. Our results are consistent with a previous hy- pothesis that the campaign reduced salt intakes by approximately 10%. The impact is shown to be stronger among women than among men. Older cohorts of men show a larger response to the salt campaign compared to younger cohorts, while among women, younger cohorts respond more strongly than older cohorts.
    [Show full text]
  • Food Standards Agency Departmental Report
    Putting the Consumer First Departmental Report Spring 2005 This is part of a series of Departmental Reports (Cm6521 to 6548) which, along with the Main Estimates, the document Public Expenditure: Statistical Analyses 2005, and the Supply Estimates 2005-06: Supplementary Budgetary Information, present the Government’s expenditure plans for 2005-2008. The complete set of Departmental Reports and Public Expenditure Statistical Analyses 2005 is also available as a set at a discounted price. Food Standards Agency Departmental Report Presented to Parliament by the Secretary of State for Health and the Chief Secretary to the Treasury by Command of Her Majesty June 2005 Cm 6525 £17.00 © Crown copyright 2005 The text in this document (excluding the Royal Arms and departmental logos) may be reproduced free of charge in any format or medium provided that it is reproduced accurately and not used in a misleading context. The material must be acknowledged as Crown copyright and the title of the document specified. Any enquiries relating to the copyright in this document should be addressed to The Licensing Division, HMSO, St Clements House, 2–16 Colegate, Norwich, NR3 1BQ. Fax: 01603 723000 or email: [email protected] Departmental Report Spring 2005 Contents Page Foreword 3 Chapter 1: Who we are and what we do 5 Chapter 2: How we are doing 9 Chapter 3: Better regulation 39 Chapter 4: The next five years – our Strategic Plan 49 Appendix 1: About the FSA 54 Appendix 2: Our Chief Executive and Board 58 Appendix 3: How we are organised 62 Appendix 4: Performance against Spending Review 2002 Service Delivery 64 Agreement targets Appendix 5: Common core tables 73 Appendix 6: Expert and strategic advisory committees 80 Appendix 7: Glossary of terms 81 The purpose of this report is to present to Parliament and the public a clear and informative account of the expenditure, activities and performance of the Food Standards This report and those of 2001, 2002, 2003 and 2004 are available on our website at Agency.
    [Show full text]
  • Healthcare Reform in Russia: Problems and William Tompson Prospects
    OECD Economics Department Working Papers No. 538 Healthcare Reform in Russia: Problems and William Tompson Prospects https://dx.doi.org/10.1787/327014317703 Unclassified ECO/WKP(2006)66 Organisation de Coopération et de Développement Economiques Organisation for Economic Co-operation and Development 15-Jan-2007 ___________________________________________________________________________________________ _____________ English text only ECONOMICS DEPARTMENT Unclassified ECO/WKP(2006)66 HEALTHCARE REFORM IN RUSSIA: PROBLEMS AND PROSPECTS ECONOMICS DEPARTMENT WORKING PAPERS No. 538 By William Tompson All Economics Department Working Papers are available through OECD's website at www.oecd.org/eco/working_papers text only English JT03220416 Document complet disponible sur OLIS dans son format d'origine Complete document available on OLIS in its original format ECO/WKP(2006)66 ABSTRACT/RÉSUMÉ Healthcare Reform in Russia: Problems and Prospects This paper examines the prospects for reform of Russia’s healthcare system. It begins by exploring a number of fundamental imbalances that characterise the current half-reformed system of healthcare provision before going on to assess the government’s plans for going ahead with healthcare reform over the medium term. The challenges it faces include strengthening primary care provision and reducing the current over-reliance on tertiary care; restructuring the incentives facing healthcare providers; and completing the reform of the system of mandatory medical insurance. This paper relates to the OECD Economic Survey of the Russian Federation 2006 (www.oecd.org/eco/surveys/russia). JEL classification: I11, I12, I18 Keywords: Russia; healthcare; health insurance; competition; primary care; hospitalisation; pharmaceuticals; single payer; ***************** La reforme du système de santé en Russie: problèmes et perspectives La présente étude analyse les perspectives de réforme du système de santé en Russie.
    [Show full text]
  • FSA Nutrient and Food Based Guidelines for UK Institutions
    www.food.gov.uk FSA nutrient and food based guidelines for UK institutions Revised October 2007 - 1 - Healthy Eating Advice 1. The Government recommends that all individuals should consume a diet that contains: • plenty of starchy foods such as rice, bread, pasta and potatoes (choosing wholegrain varieties when possible) • plenty of fruit and vegetables; at least 5 portions of a variety of fruit and vegetables a day • some protein-rich foods such as meat, fish, eggs, beans and non dairy sources of protein, such as nuts and pulses • some milk and dairy, choosing reduced fat versions or eating smaller amounts of full fat versions or eating them less often • just a little saturated fat, salt and sugar 2. The Eatwell plate is a pictorial representation of the proportion that different food groups should make to the diet. This representation of food intake relates to individuals over the age of 5. 3. Although most individuals should be able to get all the nutrients they need from following a healthy balanced diet, certain groups within the population may need to take supplements, these include: - 2 - • Women who could become pregnant or who are planning a pregnancy are advised to take an additional 400 micrograms (mcg) of folic acid per day as a supplement from before conception until the 12th week of pregnancy. In addition to this, they should also eat folate rich foods such as, green vegetables, brown rice and fortified breakfast cereals (making a total of 600 mcg of folate per day from both folate rich foods and a supplement). Pregnant and breastfeeding women should also take a daily 10mcg supplement of vitamin D.
    [Show full text]
  • Five Keys to Safer Food Manual
    FIVE KEYS TO SAFER FOOD MANUAL DEPARTMENT OF FOOD SAFETY, ZOONOSES AND FOODBORNE DISEASES FIVE KEYS TO SAFER FOOD MANUAL DEPARTMENT OF FOOD SAFETY, ZOONOSES AND FOODBORNE DISEASES INTRODUCTION Food safety is a significant public health issue nsafe food has been a human health problem since history was first recorded, and many food safety Uproblems encountered today are not new. Although governments all over the world are doing their best to improve the safety of the food supply, the occurrence of foodborne disease remains a significant health issue in both developed and developing countries. It has been estimated that each year 1.8 million people die as a result of diarrhoeal diseases and most of these cases can be attributed to contaminated food or water. Proper food preparation can prevent most foodborne diseases. More than 200 known diseases are transmitted through food.1 The World Health Organization (WHO) has long been aware of the need to educate food handlers about their responsibilities for food safety. In the early 1990s, WHO developed the Ten Golden Rules for Safe Food Preparation, which were widely translated and reproduced. However, it became obvious that something simpler and more generally applicable was needed. After nearly a year of consultation with food safety expertsandriskcommunicators, WHOintroducedtheFive KeystoSaferFoodposterin2001.TheFive Keys toSaferFoodposterincorporatesallthemessagesoftheTen Golden Rules for Safe Food Preparation under simpler headings that are more easily remembered and also provides more details on the reasoning behind the suggested measures. The Five Keys to Safer Food Poster The core messages of the Five Keys to Safer Food are: (1) keep clean; (2) separate raw and cooked; (3) cook thoroughly; (4) keep food at safe temperatures; and (5) use safe water and raw materials.
    [Show full text]