ALLCHIN S&W REVOLVER MINI STS EGW REVOLVER RINGS & BASES INDEX SCOPE MOUNT SCOPE MOUNT Fitting & Custom Components...... 274 Rifle...... 257-274 Mount A Mini Red Dot On Any Fits Ruger & S&W RINGS & BASES Handgun...... 255-256 Shotgun...... 256 Pre-Drilled S&W Revolver Revolvers Easy-to-install mount lets you Ruger - Mounts the upgrade any pre-drilled S&W revolver scope low on all single with a small red dot sight . Machined and double action revolvers . Requires drilling and tapping two holes . WEIGAND COMBAT aluminum construction offers dura- Smith & Wesson - Remove the rear sight and quickly install on newer bility and weight savings . Mount body revolvers drilled and tapped at the factory . Locates the scope on ® HANDGUN SCOPEMOUNTS frame and mount to take maximum recoil . Fits 44. Magnum, 454. alignment holes accept C-More STS, the top strap, over the top of the grip for better balance . Accepts Casull, and Ruger .480 models with removal of the rear sight . Avail- Burris Fastfire, JPoint, Optima 2000, Weaver-style rings . ab TAURUS TRACKER SCOPE MOUNT - Precision-machined, alu- able with black, anodized finish . ab Leupold Delta Point, Sig and most other small red dot sights . Posi- SPECS: Aluminum, anodized finish, black or silver. 4" (10cm) long, in- minum scope mount accepts SPECS: 44 Mag - Aluminum, silver, matte, anodized finish. 5" (12.7cm) tions red dot over the rear sight and as close to the bore as possible cludes mounting screws. S&W fits K, L and N frame. Weaver-style rings to let you long. Fits .44 Magnum only. 2.6 oz (73g) wt. Casull - Aluminum, black, for fast target acquisition . ab 1 #296-302-100AV Black Ruger Mount, 6B26H00​ �������������$ 27.00 mount a scope on your Taurus matte, anodized finish. 5 /2" (14cm) long. Fits .44 Magnum, .454 Casull, SPECS: 6061 T6 aluminum, hardcoat anodized clear (silver) or matte #296-302-101AV Silver Ruger Mount, 6B30J00​ ��������������� 31.50 Tracker . Also great for red-dot and .480 Ruger models. Includes mounting screws. black. 2.5" (65mm) long. 1" (27mm) wide. .6 oz. (17g) wt. Includes mount- optics . Integral recoil lug fits #957-000-036AV Super Redhawk .44 Mag Mount, ​ ing hardware #296-301-100AV Black S&W Mount, 6B26K00​ ����������������� 27.00 into rear sight notch for a rock #296-301-101AV Silver S&W Mount, 6B30F00​ ����������������� 31.50 7E39G11 ������������������������������������������������������ $ 49.99 #100-010-548AV S&W Revolver Scope Mount, Black, ​ solid hold that prevents scope movement . Requires removing rear #957-000-050AV Super Redhawk Casull Mount, ​ 5K40M07 �����������������������������������������������������$ 41.99 sight . No drilling or tapping required . ab 7E44F20 ������������������������������������������������������ 56.99 1 5 #100-010-549AV S&W Revolver Scope Mount, Silver, ​ SPECS: Aluminum, silver, matte finish. 4 /2" (11.4cm) long, /16" (7.8mm) high from bottom to top of mount. 1.3 oz. (36.8g) weight. Includes RUGER SINGLE SIX - No-drill, no-tap 5K40G07 ����������������������������������������������������� 41.99 mounting screws. Fits .22 LR, .22 Mag, .17 HMR. mount attaches to frame at the rear #957-000-076AV Tracker Scope Mount, 7E25Q43​ ���������� $ 32.99 sight screw . Contoured recoil lug fits LSP HIGH STANDARD in rear sight slot to prevent movement . SCOPE BASE 1 HANDGUN REDHAWK 6" & 7 /2" BARREL - Strong, lightweight mounts avail- Accepts Weaver-style rings . Use on 22. UM TACTICAL Contoured For Bull able for Ruger LR only, not for use on .32 Magnum guns . ab Barrels 1 Redhawk models SPECS: Extruded aluminum, black or silver, anodized, matte finish. 4 /2" UNIVERSAL PISTOL MOUNT 1 7 Thirteen cross-slots with 6" or 7 /2" bar- (11cm) long, /8" (22mm) wide, 1.3 oz. (38 g) wt. Includes mounting screws. Allows You To Mount An Optic Onto provide a wide range of mounting positions; cantilever design cen- rels . Remove rear sight for installation, no drilling or tapping re- #957-000-043AV Silver Single Six Mount, 7E31C88​ ���������$ 35.99 quired . Uses a front sight replacement block for attachment at the Your Semi-Auto Handgun ters the weight over the grip . Contoured for factory bull barrels (drill #957-000-042AV Black Single Six Mount, 7E27G64​ ��������� 35.99 and tap) . Accepts Weaver-style rings . ab muzzle end and the rear sight elevation hole for attachment at the Universal mount allows you to attach 1 SPECS: Aluminum, anodized, matte black finish. 5 /4" (13.3cm) long. Fits back of the top strap . Rear sight notch becomes a rock-solid recoil S&W REVOLVER - Low profile and tactical optics onto most pistols that have lug for consistent accuracy . Eight cross-slots allow you to position LSP Match barrels, factory bull barrels require drilling and tapping. In- lightweight . Fits newer, factory drilled Pistol Mount a 1913 Picatinny or accessory rail under the cludes instructions and screws. your optics for optimum eye relief . Accepts Weaver-style rings or and tapped K, L and N frame revolvers; barrel . Made of CNC machined aluminum, #530-500-001AV High Stnd. Scope Base, 3E23F10​ �����������$ 29.99 mounting systems . ab no gunsmithing required . Older revolv- with a hard coat anodized finish, mount SPECS: 6063 T6 aluminum, silver or black, matte, anodized finish. 6" ers require drilling and tapping . ab requires no tools or retro-fitting . Simply slide the 15 13 1 1 Bbl. - 7 /16" (20.1cm) long x /16" (2cm) wide. 3.1 oz. (87g) wt. 7 /2" Bbl. - 10" SPECS: Extruded aluminum, black or silver, anodized, matte finish. 4 /2" mount over the pistol until the safety detent locks 13 7 (25.4cm) long x /16" wide. 4 oz. (113g) wt. Includes mounting screws. (11cm) long, /8" (22mm) wide, 1.3 oz. (38 g) wt. Includes mounting screws. onto the barrel rail, and then clamp the optic on top #957-000-071AV Redhawk 6" Bbl. Mnt, Silver, 7E45B49​ ��� $ 55.99 #957-113-100AV Black S&W Mount, 7E28F47​ ������������������ $ 36.99 of the mount for a solid fit to your pistol . Fits me- 1 dium to large sized handguns and adds a 2 5-inch. #957-000-073AV Redhawk 7 /2" Barrel Mnt, Silver, ​ #957-113-101AV Silver S&W Mount, 7E27G63​ ���������������� 35.99 Speed Holster 7E51D12 ������������������������������������������������������� 64.99 section of Picatinny rail to the top of your pistol . LSP S&W 41 LONG SCOPE BASE 1 Mount has a small rail on the bottom for attaching a tactical light or #957-000-074AV Redhawk 7 /2" Barrel Mnt, Blk, 7E48I41​ �� � 60.99 BUCKMARK - Convert open sight, Browning Buckmark for scope use; laser . The UMH3 Universal Speed Holster is specifically designed Extra Long For Precise REDHAWK/BLACKHAWK - Drill and tap no gunsmithing required . Accepts all to fit most semi-auto firearms equipped with the UM Tactical Pistol Eye Relief mount attaches the scope to your Ruger’s Weaver-style rings . ab Mount . Made of carbon fiber, this Blade-Tech style paddle holster Six inch long rail lets top strap . Fits Ruger® Redhawk®, Blackhawk® SPECS: Aluminum, black or silver, matte fin- includes a Level 1 retention adjustment . ab ® 1 SPECS: Aluminum, hard coat anodized finish, matte black. Holster – Car- you precisely tailor eye relief for each shooter . Fits factory drilled and Super Blackhawk . Accepts Weaver-style ish. 6 /4" (15cm) long, 1.7 oz. (54 g) wt. Fits Browning Buckmark, Standard rings . ab model only. Includes mounting screws. bon fiber, black. and tapped barrels; drill and tap older barrels for custom mounting applications . Accepts all Weaver-style rings . ab SPECS: Extruded aluminum, silver or black, anod- #957-100-200AV Black Buckmark Mount, 7E28E17​ �������� $ 31.99 #100-015-786AV Universal Pistol Mount, 5B76Q98​ ������ $ 84.99 1 7 SPECS: Aluminum, black, anodized finish. 6" (15cm) long. Separate mod- ized, matte finish. 4 /2" (11cm) long, /8" (22mm) wide, #100-015-787AV Universal Speed Holster, Right Hand, ​ #957-000-034AV Silver Buckmark Mount, 7E26G52​ ������ 30.99 1 1.3 oz. (38 g) wt. Includes mounting screws. Requires drilling and tapping. 5B65A72 ���������������������������������������������������� 69.99 els for 7" Long or 5 /2" Long Heavy barrel. Includes screws, instructions. #957-124-100AV Black Ruger Mount, 7E27K64​ ���������������$ 34.99 RUGER MARK I/II/III NO-GUNSMITHING - Install conventional #530-041-007AV 7" S&W M-41 Mount, 3E28B40​ �������������$ 31.99 1 #957-124-101AV Silver Ruger Mount, 7E25L81​ ����������������� 33.99 or red dot optics on your pistol in only #530-041-055AV 5 /2" S&W M-41 Mount, 3E25K90​ ��������� 32.99 minutes . Lightweight, aluminum mount REDHAWK/BLACKHAWK HUNTER - attaches to a pre-drilled and tapped, No-drill, no-tap mount fits Redhawk and dovetail-filler block . Simply remove your long,Includes mounting screws. Fits Mark I, II, III, and 22/45™. Blackhawk Hunter with integral ring cuts rear sight, install filler-block, screw on #957-108-022AV Black Mark I/II/III Scopemount, ​ on the barrel . Double recoil lugs hold mount and attach scope and rings . Accepts Weaver-style rings . ab 7E19M04 ���������������������������������������������������� $ 24.99 1 1 tight under heaviest recoil . ab SPECS: Aluminum, black or silver, matte finish. 5 /4" (14cm) long, /2" #957-108-002AV Silver Mark I/II/III Scopemount, ​ TACTICAL SOLUTIONS BROWNING BUCK MARK SPECS: Extruded aluminum, black or silver, (12.7mm) wide, 2.5 oz. (71 g) wt. Fits Mark I, II, and III. Includes filler block, 7E18P39 ������������������������������������������������������ 23.99 1 7 anodized, matte finish. 5 /8" (13cm) long, /8" (22mm) wide, 2.6 oz. (74 g) mounting screws and instructions. PICATINNY SCOPE MOUNT wt. Includes mounting screws. #957-000-035AV Black Mark I/II/III Scopemount, ​ X-FRAME SCOPE MOUNT - Low profile #957-000-045AV Silver Redhawk Mount, 7E39Q13​ �������� $ 49.99 7E38P71 ������������������������������������������������������ $ 49.99 with the strength of stainless steel, this new #957-000-044AV Black Redhawk Mount, 7E43D21​ �������� 47.99 #957-201-100AV Silver Mark I/II/III Scopemount, ​ ab S &W scope mount accepts Weaver-style and most Picatinny rings and accessories . 7E37H94 ���������������������������������������������������� 47.99 Mount A Scope & Retain Iron Sights SUPER REDHAWK® - Aluminum mount Installation is easy, simply remove the rear sight and install this ver- attaches to the Ruger factory ring cuts RUGER MARK I/II/III DRILL & TAP - Designed to fit factory drilled satile base in just minutes . Oversize recoil lug prevents the scope Lightweight, aluminum Picatinny rail replaces factory rib/rear and requires no drilling and tapping . and tapped receivers for fast, easy, mount from shifting even when shooting full-house, magnum sight and lets you mount an optic while retaining the benefit of Uses three, steel, recoil pins to prevent no-gunsmithing installation . Fully loads . Fits all newer K, L, N and X-frame revolvers that come drilled backup “iron” sights . Eight cross-slots let you position the optic for “scope flyoff," and accepts Weaver- contoured to fit flush on top of the re- and tapped from the factory . Revolvers manufactured before 1992 best eye relief . Integral open rear sight adjusts for windage and el- style rings or mount systems such as used on Tasco 40mm red dot ceiver or barrel without unsightly gaps . require drilling and tapping . ab evation . Drilled to fit the factory hole spacing and use the original 1 7 optics . Super Redhawk .44 Mag fits only the 44. Magnum and can Extra-strong, lightweight aluminum; SPECS: Stainless steel, natural finish. 4 /2" (11.4cm) long, /8" (22mm) wide. factory rib/rear sight screws . ab be installed without removing the front and rear sights . Features accepts Weaver-style rings . Can be easily installed on non-factory 1.3 oz. (38 g) wt. 6-48 mounting screws included. SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Approximate- 13 15 a matte, silver, anodized finish . Super Redhawk Casull is similar drilled and tapped pistols . ab #957-000-068AV Silver S&W X-Frame Scope Mount, ​ ly 5" (12.7cm) long, /16" (21mm) wide, /32" (12mm) high from top of receiver. 3 in design, but uses the rear sight notch as a recoil lug to allow the SPECS: Extruded aluminum, anodized, black or silver. 4 /4" (12cm) 7E71P77 �������������������������������������������������������$ 75.99 #100-005-205AV Picatinny Scope Mount, 8K75E00​ ������ $ 75.00

order on the web

Orders: 800-741-0015 brownells.com PAGE 255 VOLQUARTSEN RUGER® MARK II/III AIMTECH WEAVER REMINGTON/MOSSBERG SHOTGUN HAHN PRECISION MOSSBERG 500/590 SCOPE MOUNT SHOTGUN SCOPE MOUNT NO-GUNSMITHING OPTIC MOUNT SHOTGUN ACCESSORY "SAFETY" RAIL Fast, Easy, Secure No-Drill, No-Tap Scope Mounts Easy-To-Install, Low- Rigid Mounting Platform for Mounting Of Scopes & Are Easy To Install Profile Sight Mount Hunting, Competition or Tactical Shotguns Red Dot Sights Lightweight mounts fit over and Easy-to- install mount attach to both sides of the receiver to lets you attach an optic or Precision-machined accessory give balanced support for any scope . Lightweight, one-piece Weaver-style rail allows easy mounting laser sight to your shotgun rail lets you mount optics, ghost-ring sights, lasers, lights, night vi- Built to withstand even hard-hitting of a red dot optic or reflex scope on your pistol . Seven cross-slots without drilling, tapping, or sion gear, and other tactical accessories on your Mossberg 500/590 . slug recoil . Installs in minutes; just provide plenty of flexibility in positioning a variety of different-style making permanent alterations to the gun . Remove the two trigger Built into the assembly is an integral, oversized, ambidextrous tang remove the trigger group pins and optics . Secures to factory pre-drilled receiver holes with three, steel group pins (Rem .), or the ejector screw and trigger pin (Moss .), slide safety that can be activated quickly and easily in high stress situa- replace with bolts included . Accepts Weaver-style rings . ab Allen head screws for a solid installation unaffected by recoil . ab on the mount, line up the holes, and secure it with the included tions . Safety design reduces stress on factory safety screw for en- RINGS & BASES 5 1 SPECS: Aluminum, hardcoat anodized, matte black or matte silver. 4 /8" SPECS: Aluminum, black, anodized finish. Approx. 6" (15.2cm) long, 2 /2" replacement pins . Low-profile, form-fitting design looks like part 7 5 hanced reliability . The rail slots are cut to true MIL-STD 1913 Pica- 8 16 (6.3cm) high. Includes bolts, wrenches, instructions. (24cm) long, / " (2.2cm) wide, / " (7.8mm) high. 1.8 oz. (51g) weight. of the receiver and positions the sight close to the bore axis . Seven tinny specs from 6061-T651 billet aluminum . Attaches to factory Mounting screws included. Fits factory pre-drilled receivers on Ruger STOCK # FITS GA PRICE cross-slots in the 5" rail let you install an optic, Weaver top-mount drilled and tapped receivers using the provided mounting screws . Mark II and III pistols. rings, or other accessory, with plenty of flexibility in setting eye relief . #017-200-008AV Benelli M1 Super 90 12 7A47J99 $ 50.49 Low-profile design with sight channel allows use of front sight #930-000-066AV Scope Mount, Black, 3Z25K50​ �������������� $ 29.99 Lightweight, yet rugged, reinforced molded polymer stands up to when optics/accessories are removed . Extends forward over barrel #017-200-009AV Browning Auto-5 12 7A64P99 $ 72.99 #930-000-065AV Scope Mount, Silver, 3Z24K49​ �������������� 28.99 extreme weather conditions ranging from -40°F to 150°F . ab for maximum mounting flexibility . Skeletonized underside reduces #017-200-006AV Ithaca 37/87 12 7A39C99 $ 41.99 SPECS: Reinforced, injection-molded polymer composite. Includes weight without compromising rigidity or strength . Durable, MIL- #017-200-001AV Rem . 1100/11-87 12 7A37J99 $ 39.99 mount, button head ejector screw, trigger group bolt, knurled nut, thread- A-8625 “F” Type III Class 2 hardcoat anodized finish for additional 3 1 #017-200-011AV Rem . 1100/11-87 Lt . 20 7A39H96 $ 40.99 ed insert, nylon-tipped set screw, /32" and /8" hex head wrenches, and strength and superb wear-resistance . Special order item; please al- instructions. Remington fits 870, 1100, 11-87; 12 and 20 gauge; right or 7A39E96 low additional time for delivery. ab #017-200-012AV Rem . 870, Lt . 20 $ 40.99 11 left handed models. Mossberg fits 500, 835; 12 gauge only; right handed SPECS: Aluminum, matte black hardcoat anodized finish. 9 /16" (24.7cm) #017-200-002AV Rem . 870 12 7A37N99 $ 39.99 13 3 models only. long, /16" (2.1cm) wide, /8" (9.2mm) tall. Requires drilling and tapping on WARNE S&W REVOLVER #017-200-003AV Mossberg 500 12 7A37D99 $ 39.99 #955-000-141AV Rem. Mount, Black, 5E23M17​ �������������$ 27.99 early model Mossberg 500. #017-200-004AV Win . 1300 12 7A39K99 $ 41.99 #955-000-142AV Moss. Mount, Black, 5E22Q48​ ����������� 26.99 #100-002-421AV Mossberg 500/590 Safety Rail, ​ MAXIMA MULTI SIGHT BASE 6K75M45 �����������������������������������������������������$ 79.99 Use Scope Or Iron Sights Heat-treated, CNC-ma- chined, steel scope mount lets HAVLIN MOSSBERG 500/590/835 you install optics without sacri- B-SQUARE SHOTGUN SADDLE MOUNTS B-SQUARE UNIVERSAL CANTILEVER HANDGUN SCOPE RAIL ficing your iron sights . Includes No Gunsmithing, a removable front sight and a RIB MOUNT Contoured To Fit Receiver Solid & Lightweight machined, rear sight recess that accepts the new-style, round-front, Increases Accuracy For Mounting Scopes & factory rear sight . Milled area on the underside of the base acts as Firmly attaches to both sides of For Slug Shooting Other Optics a recoil lug . Drilled holes make mounting easy on factory drilled receiver using existing screw/pin Mount the scope on the barrel . No and tapped guns . Accepts Weaver-style rings . Standard Maxima fits holes, and won’t obstruct operation . Scope Weaver-style scope mount- K, L, N and X frame revolvers . Maxima X Frame has extra metal up Recoil transfers to receiver for greater rings not gunsmithing; fits ribs up to .380" with 1 1 ing rail matches the top contour on all Mossberg 500/590 and 835 front and longer screws for improved recoil protection; fits X frame strength . Weaver-style rail with mul- included /2" wide vents on 1 /2" cto-c spacing . models for a durable, no-gap installation . Held by four, 8-40 tpi only . ab tiple slots provides plenty of eye relief SPECS: Aluminum, black, anodized finish. machine screws that stand up to recoil without deformation or strip- SPECS: CNC-machined steel, powder coat matte black or silver finish. adjustment for scopes and electronic sights . Open sight channel 11" (28cm) long, 7.2 oz. (205 g) wt. ping . Machined from lightweight, extruded aluminum, and anod- 3 Approx. 5 /4" (14.6cm) long. Maxima fits Smith & Wesson K, L, N, and X under the rail allows continued use of iron sights . #122-161-750AV Cantilever Rib Mount, 6K34L50​ ���������� $ 43.99 ized to match the anodized or black painted Mossberg receivers . frame revolvers. Maxima X Frame fits X frame only. SPECS: Aluminum, anodized, black. Approx. 6" (15cm) long. Two 1" Weav- Accepts all Weaver-style scope mounts and accessories . ab 3 #947-000-100AV Maxima Base, Black, 7D90I80​ ����������� $ 100.79 er-style rings included. Rem 870/1100/11-87 fits 2 /4" and 3" 12 gauge SPECS: Aluminum, black, anodized finish. 5" (12.7cm) long. 2 oz. (56.6g) 1 #947-000-101AV Maxima Base, Silver, 7D96M21​ ����������� 106.79 models. Rem 870 Magnum fits 3 /2" Magnum 870 12 gauge shotguns only. wt. Includes (4), 8-40 tpi mounting screws. Installation requires drilling and tapping on early model Mossberg 500. #947-000-246AV Maxima X Frame Base, Black, ​ STOCK # FITS GAUGE PRICE #100-002-901AV Mossberg Scope Rail, 6A17C16​ ��������� $ 22.99 7D90A80 ������������������������������������������������� 100.79 #122-460-500AV Mossberg 500 12 Ga . 6K55C99 $ 61.99 “DA-MAR” SHOTGUN SCOPE MOUNT #947-000-247AV Maxima X Frame Base, Silver, ​ #122-460-870AV Rem 870/1100/11-87 12 Ga . 6K36C97 $ 43.99 7D96Q21 ������������������������������������������������� 106.79 Secure, Extra-Strong #122-000-047AV Rem 870 Magnum 12 Ga . 6K55M99 $ 61.99 Scope Mounting Even On #122-460-120AV Win . 1200/1300/1400/1500 12 Ga 6K55B99 $ 61.99 Thin, Semi-Auto Receivers MESA TACTICAL SHOTGUN

SHOTGUN Wrap-around sub- RECEIVER MOUNT PICATINNY RAIL base puts the mounting screws into the receiver’s Mount Optics Or Tactical Sights ® ® thicker sidewalls for rock-solid, no-fail scope mounting even on WEAVER RUGER BLACKHAWK One-piece, MIL-STD 1913 Pica- thin, semi-auto receivers . Drill and tap six, 6-48 holes, then cinch MESA TACTICAL REMINGTON 870 tinny rail allows mounting a vari- down the lightweight, aluminum, sub-base plate over the top radius . NO-DRILL, NO-TAP MOUNT SYSTEM ety of optics and tactical sights on Aluminum top rail accepts all Weaver-style rings . ab SADDLE RAIL popular shotguns . Streamlined, low profile design installs to the top SPECS: Aluminum, black anodized. Approx. 5" (12.7cm) long. 2.3 oz. (64 of the receiver for a smooth “built-in” appearance . Four steel, Allen Ready-To-Install Base & Easy-Install Mount For g) approximate wt. Includes screws and instructions. Ring System Scopes, Red Dots & Other head screws secure rail to receiver for exceptional holding power . Fits shotguns with factory drilled and tapped receivers or receivers Tactical Sights STOCK # BASE# FITS Compact, lightweight 3 custom drilled and tapped for 8-40 threads . Not recommended for #483-100-001AV #1 Rem . 870/1100/11-87/58/11-48 . 12 Ga . (2 /4"), mounts use existing holes mounting optics on guns with high-mounted telescoping stocks . ab One-piece saddle mount Ithaca 51, SKB 20 Ga . S&W 1000, Brwning for simple, do-it-yourself has a Picatinny rail that lets you attach a scope, red dot reflex sight, SPECS: Machined 6061 T6 aluminum, Type III hardcoat anodized, matte scope mounting . Everything or other tactical sighting device to your Remington 870 shotgun . 2000, Franchi 20 Ga . black. Fits factory drilled and tapped receivers. Includes mounting hard- 1 1 2 needed is supplied; just add Low profile 8 /4" rail also offers plenty of room to mount a night vision #483-100-009AV #1A Rem 870/11-87 Super Mag with 3½" chamber ware and instructions. Mossberg – 5 / " (13.9cm) long. Fits 1997 and your scope . ab device or long eye relief scope . Four, steel, Allen head cross-bolts #483-100-002AV #2 Rem . 870/1100 LT 20, 11-87 20 Ga . later-mfr pump action shotguns; can be installed on 930 semi-auto with 1 SPECS: Aluminum base, steel replace the factory trigger pins to create a rock solid grip between #483-100-007AV #7 Browning B-80 12 Ga ., Beretta 302/390/1200, additional fitting. Remington 870 – 5 /2" long. Drop-in fit to 870; can be rings; black or stainless steel the saddle mount and receiver . Precision machined aluminum with installed on 1100 or 11-87 semi-auto with additional fitting. Benelli M2 3 SKB, Weatherby 82/92, Charles. Daly, Win . 1 finish. Approx. 3 /4" (9.5cm) cutouts that reduce weight without sacrificing strength . ab - 4 /2" (11.4cm) long. Drop-in fit on M2 Tactical; can also be installed on 5 ® 1200/1400, Browning Gold 12, Franchi 12 ga ., long, /8" (15.9 mm) thick, weighs 5 oz. (142 g) w/rings. Fits Ruger Black- SPECS: 6061 T6 aluminum, mil-spec Type III hardcoat anodized, matte round-top M1 after drilling and tapping receiver. ® ® 1 1 Mossberg 9200/835, Benelli Super 90, Win . hawk and Super Blackhawk black. 10 /4" (26cm) OAL, 8 /4" (21cm) long rail. 4.6 oz. (130g) weight. In- #100-004-034AV Mossberg Receiver Rail, 5A29A67​ ������ $ 34.99 Super X2 . 1 #955-300-001AV 301/301S No-Drill/No-Tap Mount, ​ cludes mounting cross-bolts. #100-005-801AV Rem 870 Receiver Rail, 5 /2", 5A27L97​ ��� 32.99 5E62H75 �����������������������������������������������������$ 73.99 #100-005-800AV Rem 870 Saddle Rail, 5A85C08​ ���������� $ 106.99 — Advise # — Shotgun Mount, 3H42D41 ������������������������ $ 54.99 #100-005-803AV Benelli M2 Receiver Rail, 5A39L47​ ������ 50.99

GUARANTEED. FOREVER.®

PAGE 256 SINCE 1939 Office/Tech: 641-623-5401 AREA 419 BRN-22™ & RUGER® 10/22® AIMTECH MINI-14 & 30 SCOUT RAIL IMPROVED SCOPE RAIL ™ Very Fast Sighting For Close BRN-22 OPTIC RAIL/REAR SIGHT PICATINNY SCOPE BASE Range Varmint Hunting

ARC Rail (installed on RINGS & BASES stripped receiver) ASSEMBLY Cross-Slot System Provides Replaces the handguard Solid, Versatile Mounting On with a Picatinny-style rail that Picatinny Optic Mount for Your Smooth- Tactical & Sporting Rifles securely clamps to the barrel. Full-Length Rail ™ ® CZ 455 Rail w/ Top BRN-22 or 10/22 Receiver (top & under- Iron sights remain usable; no modifications to rifle. ab Bubble Level Rugged, one piece design side views) SPECS: 6000 series, aluminum, black anodized. 9" (22.7cm) long. 14.3 oz, Our add-on Picatinny rail optic mount provides a rock-solid base for scope rings with greater flexibility ® (405 g). Accepts Weaver-style rings. A Scope Base Built Like the Rock of Gibralter attaches to the top of a BRN-22™ or Ruger than traditional ring-and-base systems. Slots cut to true MIL-STD ® 10/22 receiver using the pre-drilled factory scope mounting holes. 1913 specs accept both Picatinny and many Weaver-style rings to #017-300-014AV Mini-14 Scout Rail Mnt, 7A80M99​ ������ $ 85.99 - And Good Looking, Too! ® AND it will fit both standard AND 10/22 Takedown receivers. Once increase your scope-mounting options on both tactical and sport- #017-300-001AV Mini-30 Scout Rail Mnt, 7A80B99​ ������ 85.99 These Picatinny-slot scope bases are machined from 7075 it’s installed, you can mount either a traditional scope or a red dot ing rifles. Easily alter the spacing between the rings to accommo- T6 aluminum alloy for a superb combination of strength and light sight to your rimfire. The integral rear “iron” sight can be used alone date different-length scope bodies, and adjust eye relief to fit the weight. They come off the CNC mill with NO sharp edges - they've with a suitable front sight or as a backup should your optic fail. The specific needs of each shooter. Installs quickly using factory drilled all been neatly radiused and chamfered. There's nothing to snag on rear sight is a standard A1-type M16/AR-15 with the right-side wind- scope base holes and screws—no drilling and tapping on most guns. your sling, other gear, or your hand on the way to the bolt knob. age adjustment wheel with 10 detent-locked windage settings, and Underside of base is cut out to accommodate receivers with right- A.R.M.S. FAL/L1A1 Even the edges of the slot lugs are radiused for a clean look, but an A2 two-position, flip-up aperture. Many AR-15 shooters will find or left-hand ejection ports. Choose between models precision make no mistake: these slots are cut to correct MIL-STD 1913 Pica- this sight comfortingly familiar; if the AR is not your centerfire rifle machined from 4140 billet steel for superb strength and stability, PICATINNY SCOPE MOUNT tinny spacing. Down below, there's an integral recoil lug that bear of choice, you’ll find it practical, effective, and quite versatile in its or aluminum models machined from 6061 T6 billet for maximum against the front of the receiver ring, so these bases STAY PUT under own right. The MIL-STD 1913 Picatinny rail is machined from 6061 T6 weight reduction. Matte, black, anodized finish blends with most Integral Rail Mounts recoil. All other areas that contact the receiver are 1:1 machined aluminum billet, with a mil-spec Type III hardcoat anodized finish. factory finishes. Models available for Remington, Winchester, and Optics Or Tactical Sights to the EXACT profile of action for a superb fit. The ejection port The A1 sight is machined steel with a durable black oxide finish. Four Savage short action (SA), long action (LA), and Winchester Short ® cut blends seamlessly into the action, with plenty of room for use T-10 Torx head mounting screws included. Brownells Gun Tech™ Magnum (WSM) receivers, plus military Mauser 98 rifles. 20 MOA Heavy duty, one-piece on top-loading ADL-style actions. Remington 700 rails available in Note: Screw-on installation to standard BRN-22 (#078-000-429) models have built-in 20 MOA elevation to help you get enough dust cover with integral two configurations: ARC Top has a smooth area in the middle that's and BRN-22 Takedown (#078-000-431) receivers. Use with front elevation for accurate long-range targeting without exceeding the Picatinny rail provides a rock-solid platform and optimum mounting slightly dished, mainly for aesthetics (it will not, however, work with sights #100-007-029 (stnadard sporter contour factory barrel) and elevation adjustment of your scope. ab flexibility for scopes or tactical sights. MIL STD 1913 rail accepts both 1 MPA or Spuhr mounts). Full-Slotted rail is compatible with all Pica- #100-007-239 (.920” O.D. barrels). Rear sight aperture sizes: .070” SPECS: Aluminum Models - 6061 T6 aluminum billet, hardcoat anodized Picatinny and Weaver-style mounting components. Over 8 /2" long tinny scope mounts, including Spuhr and MPA, that have a recoil and .195”. Rear sight thread is 10-36 tpi, so it will accept aftermarket matte black. Steel Models - 4140 billet steel, matte black oxide finish. Sav- to provide plenty of mounting space, even for long body scopes. lug in the center of the mount. Both include four each of #6 and AR-15 apertures. ab age fits models with AccuTrigger™. Mauser 98 fits military rifles; requires Rigid, extruded aluminum body with riveted, internal steel frame #8 Torx T-10 screws, so the mount can be installed immediately, #100-033-605AV BRN-22 Rail/Rear Sight Assembly, ​ drilling and tapping of receiver; four (4) Torx® head screws included. Win- rails for extra support. Hardcoat anodized for durability. Models regardless of which screw size your receiver takes. Rails for Other 4C73G57 �����������������������������������������������������$ 85.99 chester models fit post-’64 rifles. available for standard and paratrooper actions. Paratrooper fea- Rifles are full-slotted. Most rails available with built-in elevation so tures a steel, recoil spring rod riveted in place for use with folding you can take those super-long-range shots without maxing out STANDARD PICATINNY BASES stocks only. Fits inch and metric pattern FAL/L1A1 and clones. ab your scope's internal elevation adjustment. CZ 455 rail comes with STK# ALUMINUM STK# STEEL FITS SPECS: Extruded aluminum, hardcoat anodized, matte black with steel 5 7 a bonus: a built-in green bubble level. The 30 MOA model is ideal #080-000-393AV #080-000-402AV Mauser 98 rails. 8 /8" (21.8cm) long x 1 /16" (3.6cm) wide. Standard - 7 oz. (198g) for folks who like to push their .22 LR target rifles out to 300+ yards. weight. Paratrooper - 7.4 oz. (210g) weight. Fits FAL/L1A1 and clones There's extra real estate at the front of the rail to allow positioning 30MM #080-000-391AV #080-000-399AV Rem 700 SA with inch or metric pattern receivers. the scope well forward. ab #080-000-392AV #080-000-400AV Rem 700 LA #100-004-124AV Std FAL Scope Mnt, 1K100C00​ ����������� $ 127.99 #100-029-607AV Rem 700 SA 20 MOA ARC Rail, ​ CANTILEVER SCOPE MOUNT #080-000-394AV #080-000-403AV Savage Model 10 SA #100-004-125AV Paratrooper FAL Scope Mnt, ​ 6Z00FUS �������������������������������������������������� $ 100.00 Everything You Need for a Secure #080-000-395AV #080-000-401AV Savage Model 110 LA 1K110Q98 ������������������������������������������������� 141.99 #100-029-608AV Rem 700 SA 20 MOA Full Rail, ​ Scope Installation on Your AR- #080-000-398AV #080-000-405AV Winchester 70 SA 6Z00LEJ �������������������������������������������������� 100.00 Style Rifle #080-000-397AV #080-000-404AV Winchester 70 LA #100-029-609AV Rem 700 SA 30 MOA Full Rail, ​ #080-000-396AV #080-000-406AV Winchester 70 WSM 6Z00ERR �������������������������������������������������� 100.00 This is a true one-piece scope — Advise # — Picatinny Scope Base, Alum., 8K46I95 ���� $ 49.99 #100-032-685AV Rem 700 LA 20 MOA ARC Rail, ​ mounting solution for your AR-type B-SQUARE RUGER® MINI-14® 6Z00QFD ������������������������������������������������ 100.00 "Modern Sporting Rifle." It positions — Advise # — Picatinny Scope Base, Steel, 8K87A49 ���� 99.99 the scope forward to give you plenty of eye relief, while it elevates #100-032-686AV Rem 700 LA 20 MOA Full Rail, ​ 20 MOA PICATINNY BASES SCOPE MOUNT 6Z00BUH ������������������������������������������������ 100.00 the scope high enough for a comfortable head position and plenty of receiver clearance for the objective bell. Machined from a solid STK# ALUMINUM STK# STEEL FITS Multi-Slotted For Perfect Ring Spacing #100-029-610AV CZ 455 15 MOA Rail w/Level, ​ billet of 6061 T6 aluminum, this mount is both lightweight and For Series 181 and newer with remov- 6Z00DCJ �������������������������������������������������� 100.00 1 #080-000-763AV NA Rem 700 SA strong - and rigid, too. A pair of hardened steel /2" hex nuts provide #080-000-764AV #080-000-766AV Rem 700 LA/Howa 1500/Wby able bolt stop covers. Attaches to side of #100-029-611AV CZ 455 30 MOA Rail w/Level, ​ tremendous locking force to ensure your mount, and the scope receiver; replaces the bolt stop cover plate. 6Z00NEH �������������������������������������������������� 100.00 attached to it, stays in place. Remove the mount/scope unit from Vanguard Locks in place with two brass-tipped set- #100-033-169AV Tikka T3/T3x 20 MOA Rail, 6Z00EAC​ ��� 80.00 the rifle and reinstall it with minimal-to-no shift in the scope’s zero. — Advise # — 20 MOA Picatinny Scope Base, Alum., screws. Comes with 1" Weaver-style scope rings. It fits standard Picatinny receiver rail slots and accepts scopes with 8K55N73 ���������������������������������������������������������$ 59.99 SPECS: Aluminum, anodized black. Screws and recoil keys are steel. 30mm tubes. On an AR-15, this mount positions the centerline of — Advise # — 20 MOA Picatinny Scope Base, ST, #122-450-014AV Mini-14 Mnt, Black w/Rings, 6K75A07​ ��� $ 75.99 the optic 1.4" above receiver, ideal for maintaining a comfortable 8K93A64 ��������������������������������������������������������� 99.99 head position. And it weighs only 7.5 oz.! Optimized for the AR-15 DOVETAIL SCOPE BASE but there's no reason you can't use our Cantilever mount on other REMINGTON 700 HEAVY DUTY PICATINNY BASE - Same one- MSRs, too. Gives any 30mm scope you choose to mount a solid, piece, machined aluminum design as our standard Picatinny scope Fits All Ungrooved .22s; stable, secure platform that helps you enjoy the best performance bases, with oversized, 8‑40 tpi mounting screws for greater grip- ® Available In Two Diameters from both rifle and optic. ab ping force that’s ideal for heavy, long-range scopes. Requires drill- BURRIS RUGER WEAVER ADAPTER #080-001-351AV 30mm Cantilever Scope Mount, ​ ing out and tapping factory receiver holes to accept the larger Brownells Dovetail Scope 7D77A18 �������������������������������������������������������$ 89.99 screws. Models to fit short and long action 700s, in standard or ex- Lets You Use Weaver-Style Rings Base gives you the ability to tended height with an extra 20 MOA elevation for those extremely On Ruger Rifles & Revolvers update any of those millions long range shots. ab of older .22 rifles to accept modern rimfire optics. Made of tough, SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Includes Gives you a wider selection of durable, aluminum; black anodized to compliment blued firearms. four steel, 8‑40 tpi Torx® mounting screws. Requires drilling and tapping available rings. Extra slots expand 3 Solid, rigid support. Accepts all tip-off rings designed for /8" nominal lenging scope mounting jobs your customers just keep bringing in. of receiver to accept 8‑40 tpi screws. Standard and extended 20 MOA mounting options. Securely clamps to dovetailed receivers. Pre-drilled and countersunk to accept three Simply cut to length, drill and countersink, then refinish exposed heights to fit Remington 700 short action (SA) or long action (LA). rifles and handguns; machined for Ruger factory rings. 8-40 screws (included). Drill and tap receiver to mount. See our 12" ends with our Aluma-Hyde™ or Baking Lacquer. Accepts rings that SPECS: Steel, polished blue finish. M77® fits M77 rifles, Super Redhawk®.

3 #080-000-759AV Rem. 700 SA HD Base, Std, 8K45H71​ ��� $ 49.99 ® RIFLE long base stock below for all those special applications. ab fit a /8" nominal dovetail. Contoured to the same base diameter as Set of two bases, 1.375" (35.9mm) long and 1.980" (50.3mm) long. 77/22 SPECS: Aluminum, black, anodized. 1" dia. fits receivers of 1" and 1.05" our 4" Base above, so it'll fit a wide range of popular rifles. ab #080-000-760AV Rem. 700 LA HD Base, Std, 8K45N71​ ��� 49.99 fits Redhawk® Hunter, Blackhawk® Hunter, 77/22®, 77/44®, 77/50®, Model (2.7cm). 4" (10.2mm) long. SPECS: All are 12" (30.48cm) long, Contoured - 840-12, .840" (21.3mm), #080-000-761AV Rem. 700 SA HD Base, 20 MOA, ​ 96™ (.44 Mag), 10/22® Mag, Mini-14®, Deerfield, and No. 1. Set of two 1 #080-030-104AV 100-4 Dovetail Base, 8K3C07​ �����������������$ 5.99 or 100-12, 1" dia. base contour. Flat - /2" (12.7mm) wide. 8K63D98 ���������������������������������������������������� 69.99 1.980" long bases. DOVETAIL SCOPE BASE STOCK - 12" lengths of blank Dovetail #080-031-841AV 840-12 Contourd Stock, 8K5N88​ ����������$ 9.99 #080-000-762AV Rem. 700 LA HD Base, 20 MOA, ​ #118-410-990AV M77 Weaver Adapter, 8A32J99​ �������� $ 32.99 Scope Base Stock—just the ticket for all those strange and chal- #080-032-101AV 100-12 Contoured Stock, 8K5Q89​ ������� 9.99 8K63E95 ���������������������������������������������������� 69.99 #118-410-991AV 77/22 Weaver Adapter, 8A32B99​ ���� 32.99

order on the web

Orders: 800-741-0015 brownells.com PAGE 257 BENCH-SOURCE SAVAGE RIFLE DAI MANAGEMENT ENFIELD NO. 4 & 5 CALCULATING REQUIRED SCOPE RING HEIGHT SCOPE BASES SCOPE MOUNT The following formula provides a quick and effective way to determine proper scope ring height for the majority of rifle scope mounting applications. There are a few applications where the barrel contour will allow Standard Or 20 MOA Quick Detachable, Positive the scope to be mounted slightly lower than the calculated measurement, and other instances where a heavy Return To Zero Elevation For Short & Long barrel equipped with a rear sight may require a slightly higher scope ring height than calculated. An alternative Range Competition No gunsmithing required to put to using the formula provided here is available in the Determining Scope Ring Height video at brownells.com. Lightweight, one-piece base with integral Picatinny rail fits Sav- a scope on that old Enfield No. 4 or age short action benchrest rifles. Standard model is intended for 5. Quick detachable, Weaver-style ranges from 50 to 300 yards, 20 MOA model provides an additional base is machined to extremely close tolerances for precise return 20 minutes-of-angle in elevation for hitting targets beyond 400 to zero. Attaches solidly to the receiver using the ejector and safety yards. Precision machined from 7075 T6 aluminum for strength screws. Installation requires no bolt modification or rear sight re- moval. Leveling adjustments adapt mount to a wide range of receiv-

RINGS & BASES and durability. Length and width tolerances vary less than .002" to help center the scope to the bore and minimize initial adjustments. ers; windage adjustments help keep your scope reticle in the center A Four, steel Allen head screws secure the base to the receiver and of its range. Does not impair access to safety. provide exceptional holding power. Fits Savage round top, short SPECS: Aluminum, matte black. Savage-built rifles and others using a flat D action receivers using factory pre-drilled scope base holes. Accepts ejector spring require block-style spring. 3.9" (10cm) long. B Picatinny and Weaver-style rings. ab #100-000-319AV Enfield Scope Mount, 4K56A25​ ������������ $ 69.99 C 3 SPECS: 7075 T6 aluminum, silver. Steel, 6-48 tpi x /8" mounting screws. 13 6" (15cm) long x /16" (2.1cm) wide. 1.9 oz. wt. Standard - .41" (10.4mm) high. 20 MOA - .38 -.41" (9.6-10.4mm) high, tapered. Fits Savage round top, short action receivers using factory pre-drilled scope base holes. ® ® #100-004-446AV Picatinny Scope Base, Std, 4Z63N27​ ���$ 79.99 DLASK ARMS RUGER 10/22 #100-004-447AV Picatinny Scope Base, 20 MOA, ​ *NOTE: Subtract known height of the front base from PICATINNY SCOPE MOUNTS 4Z64L52 ������������������������������������������������������ 81.99 A = Outside diam- C = Base Height: Dimension B in table to determine the actual ring height. Picatinny Rails For eter of scope objective Distance from top of Ruger® 10/22® Rifles end. receiver to top of front OBJECTIVE *1" SCOPE *30mm SCOPE scope base. DIAMETER TUBE TUBE Tough, lightweight DIMENSION A DIMENSION B DIMENSION B aluminum rails feature Picatinny slot spacing for fast, simple chang- B = Distance D = Ring Height: BADGER ORDNANCE es to eye relief, plus greater flexibility in scope choice. Three height between top of receiver Distance from top of .984" (25mm) 0" (0mm) --- choices fit various objective sizes, or improve cheek weld. Extends (where shown) and base to bottom of scope 1.023" (26mm) .011" (.27mm) --- MAXIMIZED SCOPE RAIL over the barrel, or can be reversed to better position optics with bottom of scope tube. 1.062" (27mm) .031" (.78mm) --- shorter eye-relief. Uses the factory-drilled scope base holes, with tube. 1.102" (28mm) .051" (1.29mm) --- Forward Cant Lets You no permanent alteration to your rifle. 5 1.141" (29mm) .071" (1.80mm) --- Zero At Extended Range SPECS: Aluminum, hardcoat anodized, black. 6 /8" (16.2cm) long; .375" (.95cm), .500" (1.3cm), or .750" (1.9cm) tall. 1.181" (30mm) .091" (2.31mm) --- Scope Ring Height Formula: B – C = D 1.220" (31mm) .111" (2.81mm) --- Heavy-duty steel base with 20 MOA forward angle increases #253-000-003AV Scope Mount Rail .375", 3E27E46​ ��������� $ 37.99 maximum scope elevation for long range shooting. Machined after #253-000-004AV Scope Mount Rail .500", 3E25P85​ ������� 34.99 1.259" (32mm) .130" (3.30mm) --- hardening to maintain dimensions. Integral recoil lug withstands the 1.299" (33mm) .150" (3.81mm) --- hardest kicking calibers. Uses MIL-STD 1913 Picatinny slot pattern 1.388" (34mm) .169" (4.29mm) --- for maximum sight mounting possibilities. Remington Zero Cant fits PROCEDURE 1.377" (35mm) .189" (4.80mm) --- 700 short action only and does not have 20 MOA forward angle; use 1.417" (36mm) .209" (5.30mm) --- where extra elevation is not required. ab FARREL INDUSTRIES 1) Measure the outside diameter of the scope ob- 1 1.456" (37mm) .228" (5.79mm) --- SPECS: 4142 steel, black, matte finish. 7 /8" (18.1cm) long, 5.6 oz. (158 g) jective (A). If using scope covers, make this measure- 1 1.496" (38mm) .248" (6.29mm) --- wt. Rem Zero Cant - 6 /4" (15.9cm) long. 4.9 oz. (138g) wt. ONE-PIECE SCOPE BASES ment with the front scope cover in place to ensure 1.535" (39mm) .268" (6.80mm) --- #093-306-070AV Rem 700 Long Action, 3K142K79​ ������ $ 149.99 Precision-Machined Quality proper clearance. #093-306-060AV Rem 700 Short Action, 3K00NYL​ ������ 159.99 & Innovative Design 1.574" (40mm) .287" (7.28mm) .197" (5.00mm) #093-000-012AV Rem. 700 SA Zero Cant, 3K00IQG​ ���� 159.99 NOTE: Not all scope objectives measure exactly 1.614" (41mm) .307" (7.79mm) .217" (5.51mm) Scope bases precision #093-000-018AV Savage 10 Accu-Trigger, 3K146B24​ ��� 149.99 as advertised by the manufacturer, so we recom- 1.653" (42mm) .327" (8.30mm) .237" (6.01mm) CNC-machined from solid bar stock are held to .002" tolerances to mend measuring with a precision caliper. 1.692" (43mm) .346" (8.78mm) .257" (6.52mm) #093-000-005AV Win 70 Long Action, 3K139A99​ ���������� 149.99 create an exceptionally flat, straight, solid platform for optics. Ac- #093-000-006AV Win 70 Short Action, 3K139C99​ �������� 149.99 cepts Picatinny and Weaver-style rings. Bedding-compound groove 1.732" (44mm) .366" (9.29mm) .276" (7.01mm) ® 1.771" (45mm) .386" (9.80mm) .296" (7.51mm) helps you get an exact, base-to-receiver fit. Self-centering Torx head 2) Find the objective diameter (A) for your scope screws and chamfered screw holes help prevent slippage under re- 1.811" (46mm) .406" (10.31mm) .316" (8.02mm) coil. Available in one-piece Standard or 20 MOA (20 minutes built-in in the table to the right. 1.850" (47mm) .425" (10.79mm) .335" (8.50mm) elevation) models. ab 1.889" (48mm) .445" (11.30mm) .355" (9.01mm) 7 SPECS: Steel, black oxide finish. /16" (11mm) high from bottom to top 7 13 1.929" (49mm) .465" (11.81mm) .375" (9.52mm) of base. Remington 700 Short - 5 /16" (13.8cm) long, /16" (21mm) wide; 3) Find the corresponding scope clearance di- D.S. ARMS FN-FAL SA-58 SCOPE MOUNT 1.968" (50mm) .484" (12.29mm) .394" (10.00mm) others will vary. Savage RT fits round top receiver of Savage AccuTrigger mension (B) in the table for the tube diameter (1" or 2.000" (51mm) .500" (12.70mm) .414" (10.51mm) No Gunsmithing, Sturdy models. Savage 10 and 110, both old models and RT, also fit correspond- 30mm) of your scope. Base For Optical Sights ing Savage models from 10/110-16/116 series. 2.047" (52mm) .524" (13.30mm) .434" (11.02mm) 2.086" (53mm) .543" (13.79mm) .454" (11.53mm) It takes only a few minutes STK# 1-PIECE STK# 20 FITS 2.125" (54mm) .563" (14.30mm) .473" (12.01 mm) to replace the dust cover with this solid aluminum mount. Clamps STANDARD BASES MOA BASES 4) Measure the front base height (C) with a caliper 2.165" (55mm) .583" (14.80mm) .493" (12.52 mm) to frame with five, internal steel rails; provides a rock solid base #100-001-056AV #100-001-070AV Win. 70 Long or find this dimension in the manufacturer’s litera- for mounting even the largest scopes. Picatinny-style rail provides 2.204" (56mm) .602" (15.29mm) .513" (13.03mm) #100-001-060AV #100-001-074AV Rem. 700 Short ture. optimum mounting flexibility for scopes or electronic sights. Drilled 2.244" (57mm) .622" (15.79mm) .532" (13.51mm) to accept Brass-Savr Bag. Made in the U.S.A. Fits inch- and metric- #100-001-062AV #100-001-076AV Rem. 700 Long 2.283" (58mm) .642" (16.30mm) .552" (14.02mm) pattern receivers. Paratrooper mount features a removable recoil #100-001-144AV #100-001-149AV Mauser 98 5) Subtract the known front base height (C) from 2.322" (59mm) .661" (16.78mm) .572" (14.52mm) spring guide rod for use with folding stock rifles only. Lets you re- #100-001-064AV #100-001-078AV Sav. 10 Short 2.362" (60mm) .681" (17.29mm) .591" (15.01mm) move the bolt and carrier without removing the mount and risking dimension (B) to determine the required ring height #100-001-066AV #100-001-080AV Sav. 110 Long 2.401" (61mm) .701" (17.80mm) .611" (15.51mm) loss of zero. ab (D). SPECS: 6061-T6 Aluminum, matte black finish. Accepts Weaver-style #100-001-020AV #100-001-145AV Sav. 10 Short RT 2.440" (62mm) .720" (18.28mm) .631" (16.02mm) #100-001-142AV NA Sav. 110 Long RT RIFLE rings. 8.5" (21.5cm) long. 11 oz. (313 g) weight. 2.480" (63mm) .740" (18.79mm) .651" (16.53mm) #274-100-058AV SA-58 Scope Mount, 4G69L67​ ������������ $ 84.99 — Advise # — One-Piece Standard Base, 8K00FXQ ���� $ 112.99 2.519" (64mm) .760" (19.30mm) .670" (17.01mm) Instructional video available at brownells.com #274-000-014AV SA-58 Paratrooper Mnt, 4G82K93​ ������ 88.99 — Advise # — One-Piece 20 MOA Base, 8K96C09 ������ 120.99 2.559" (65mm) .780" (19.81mm) .690" (17.52mm)

GUARANTEED. FOREVER.®

PAGE 258 SINCE 1939 Office/Tech: 641-623-5401 EGW ONE-PIECE SCOPE MOUNT FARRELL INDUSTRIES GEISSELE AUTOMATICS ® Easy, Versatile Scope STOCK # FITS LENGTH ACTION MOA PRICE FG-FORCE SCOPE MOUNT SUPER PRECISION SOPMOD Attachment For Popular 1 #296-000-229AV Tikka T3 7 /2" - 20 6B34J69 $ 36.00 Extra “Lug” Adds Recoil CERTIFIED SCOPE MOUNTS RINGS & BASES Rifles & Shotguns MOA Resistance 1 Ultra-Secure Precision Mounts Add the versatility of a one-piece Picatinny scope rail to your rifle #296-000-230AV Mossberg 100 ATR 7 /2" LA 4x4 0 6B34L69 $ 36.00 CNC-machined base spreads recoil to help keep scopes, even 1 Customized for Specific Scopes or shotgun with no drilling or tapping. Precision machined from ex- #296-000-231AV Remington 597 6 /4" - 0 6B34G69 $ 36.00 heavy ones, on the gun and precisely zeroed from shot-to-shot. truded aluminum or hardened steel with Picatinny slot-and-rail spac- 1 Angled screw wedges against the receiver opening to provide an- #296-000-232AV Remington 597 6 /4" - 20 6B34G69 $ 36.00 Each Geissele one-piece (when assem- ing that allows fast and simple changes to eye relief, plus great flexibil- 5 other recoil lug to divert recoil away from the base and mount- #296-000-233AV Savage 42 6 /8" - 0 6B26N00 $ 27.00 bled) Super Precision scope mount is custom ity in scope choice. Some models available with 20 or 30 MOA built-in ing screws. Tolerances for straightness and flatness are held within 5 #296-000-234AV Ruger American 6 /8" - 0 6B34L69 $ 36.00 designed for mounting a specific optic elevation to aid in long-range shooting without maxing out scope .002". Bedding-compound inletting on mount bottom helps you 16 on an M4A1 carbine, FN SCAR Mk /17, elevation adjustment. Drilled to fit the factory scope mount holes on Rimfire® ® get a perfect base-to-receiver fit. Self-centering Torx screws help and other firearms used by the United the gun’s receiver. Lightweight Tactical mounts have a milled center 5 #296-000-235AV Remington 783 6 /8" SA 0 6B34F69 $ 36.00 prevent slipping during use. Accepts Picatinny and Weaver-style States Special Operations Command channel for weight reduction; hex-head mounting screws and Allen #296-000-236AV Remington 783 7" LA 0 6B34I69 $ 36.00 rings. Available with or without 20 minutes of elevation (MOA). ab 9 (USSOCOM). Performance and reli- wrench included. Heavy Duty mounts are .100" lower than the Light- 16 AR-15 National Match #296-000-237AV Remington 783 7" LA 20 6B34M69 $ 36.00 SPECS: Steel, blue finish. Length approximately equal to action length, / " ability were the primary goals in their weight mounts to minimize weight and keep your optic closer to the (1.4mm) high. Savage Round Top fits models with AccuTrigger. Recoil lug ® ® 5 #296-000-238AV Ruger 10/22 4 /8" - 0 6B26L00 $ 27.00 1 development. These mounts will provide an extremely secure foun- barrel centerline for improved accuracy. Full-width cross-slots are 4 screw is / "-28, mounting screws are 6-48. dation for the optic to ensure maximum operator effectiveness in gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid, Takedown STK# STD. STK# MOA FITS providing long-distance suppressive fire. They're also exceptionally extruded 7075 T6 aluminum or 4140 chrome-moly steel. Includes #296-000-239AV Marlin 39 4" - 0 6B34N69 $ 36.00 ® solid, reliable mounts for any long-range civilian shooting applica- socket head Torx screws and wrench. ab 1 #100-001-367AV #100-001-368AV Rem. 700 Short #296-000-248AV Remington 1100/ 5 /2" - 0 6B26L00 $ 27.00 tion. Every SOPMOD series mount has been put through rigorous SPECS: Lightweight Tactical - 6061 T6 aluminum, anodized, matte black 1187/Versa Max #100-001-365AV #100-001-366AV Rem. 700 Long U.S. military testing and certification by USSOCOM for use by Special finish. Includes socket head Allen screws and wrench. Heavy Duty - 7075 1 #100-001-369AV #100-001-370AV Sav. 110-116 Long Forces combat soldiers. Precision-machined 7075 T6 aluminum T6 aluminum, mil-spec hardcoat anodized, or 4140 chrome-moly steel #296-000-249AV Remington 870 5 /2" - 0 6B26M00 $ 27.00 7 #100-001-375AV #100-001-376AV Sav. 10-16 Short Rd Top billet construction with hardened steel ring cap screws and cross- pre-hardened to Rc 32-35, mil-spec Parkerized, matte black. Includes #296-000-250AV Savage 220 Slug 6 /8" - 0 6B34Q69 $ 36.00 bolts, mil-spec hardcoat anodized finish, matte black. Vortex mod- Torx screws and wrench. Gun, Shortened NA #100-001-374AV Sav. 110-116 Lng Rd Top #100-001-377AV #100-001-378AV Win. 70 Long els specifically designed for use with Vortex 1-6x scopes (30mm LIGHTWEIGHT TACTICAL SCOPE MOUNTS #296-000-251AV Browning A-Bolt 7" - 0 6B34C69 $ 36.00 tubes). Available in 2 heights (top of rail to scope centerline); higher — Advise # — Standard Mount, 8K00FLB ���������������������� $ 118.99 STOCK # FITS LENGTH ACTION MOA PRICE 12 Gauge model provides clearance over rangefinders, lasers, and IR devices. 1 — Advise # — MOA Mount, 8K108K70 ���������������������������� 136.99 SR-25 models are for the SR-25 rifle platform, configured for the #296-000-099AV Browning A-Bolt 6 /8" (15.6cm) SA 0 6B34E69 $ 36.00 HEAVY DUTY SCOPE MOUNTS Leupold Mark 6, Leupold Mark 8 CQBSS, and Schmidt & Bender (all #296-000-100AV Browning A-Bolt 7" (17.8cm) LA 0 6B34C69 $ 36.00 34mm tubes) scopes. AR-15 National Match mount shares many of STOCK # FITS LENGTH MATERIAL ACTION MOA PRICE #296-000-183AV Marlin 5" (12.7cm) - 0 6B26L00 $ 27.00 the SOPMOD series features and is engineered to meet the demands 1 1895/336/444 #296-000-149AV Rem. 700 6 /4" (15.9cm) Alum SA 0 6B61H00 $ 63.00 of civilian high-power competition, including the recent CMP rules 1 FULTON ARMORY M14/M1A 3 #296-000-156AV Rem. 6 /4" Steel SA 0 6B104I00 $ 108.00 for use of optic sights. Forward scope position plus 1.3" height (top #296-000-096AV Mossberg 5 /4" (14.6cm) ’96 & 0 6B26N00 $ 27.00 500/590/835 earlier 700/722/40X PICATINNY SCOPE MOUNT of rail to scope's centerline) help you maintain a good cheekweld. 1 Built-in 10 MOA of elevation. ab 3 #296-000-150AV Rem. 700 6 /4" Alum SA 20 6B61L00 $ 63.00 #296-000-102AV Mossberg 5 /4" ’97 & 0 6B26G00 $ 27.00 1 Secure, Stable, No-Gunsmithing #296-000-157AV Rem. 6 /4" Steel SA 20 6B104A00 $ 108.00 #100-025-597AV AR-15 SOPMOD Vortex 1-6x Mount, 500/590/835 later Scope Attachment 1.54" High, 7B325J00​ ���������������������������� $ 325.00 1 700/722/40X #296-000-089AV Rem. 700 6 /8" SA 0 6B34I69 $ 36.00 1 One piece, steel mount provides #100-025-598AV AR-15 SOPMOD Vortex 1-6x Mount, 15 #296-000-151AV Rem. 700 6 /4" Alum SA 30 6B61J00 $ 63.00 #296-000-088AV Rem. 700 6 /16" LA 0 6B34M69 $ 36.00 1 a secure, stable scope base that won’t 1.93" High, 7B325D00​ �������������������������� 325.00 #296-000-146AV Rem. 700 7 /8" (18.1cm) Alum LA 0 6B61B00 $ 63.00 #296-000-211AV Rem. 700 7.1" LA 20 6B34M69 $ 36.00 shift between shots. Rock-solid, three- 1 #100-025-599AV SR-25 SOPMOD Mark 6 Mount, ​ 1 #296-000-158AV Rem. 7 /8" Steel LA 0 6B104L00 $ 108.00 #296-000-095AV Rem. 5 /4" – 0 6B26A00 $ 27.00 point mounting system attaches to the factory scope mount screw 7B00HNB ������������������������������������������������ 350.00 760/740/742* 700/721/40X hole in the receiver and the charger guide dovetail, while the set- #100-025-654AV SR-25 SOPMOD CQBSS Mount, ​ 1 ® ® 1 #296-000-147AV Rem. 700 7 /8" Alum LA 20 6B61Q00 $ 63.00 screw at the front uses the receiver ring as a stop to prevent forward #296-000-097AV Ruger 10/22 6 /2" – 0 6B34J69 $ 36.00 7B00MEE �������������������������������������������������� 350.00 1 movement. No drilling or tapping required; mounting hardware in- ® ® 1 #296-000-159AV Rem. 7 /8" Steel LA 20 6B104P00 $ 108.00 4 #100-025-655AV SR-25 SOPMOD Schmidt & Bender #296-000-187AV Ruger 10/22 6 / " – 20 6B34F69 $ 36.00 cluded. Machined from the same type of steel as the M14 receiver, #296-000-217AV Ruger American 6.7" SA 0 6B34H69 $ 36.00 700/721/40X 34mm Mount, 7B00JJH​ ���������������������� 350.00 1 so mount and receiver expand at the same rate as the gun heats up Rifle® #296-000-148AV Rem. 700 7 /8" Alum LA 30 6B61J00 $ 63.00 to help keep your optic zeroed during prolonged fire. Thirteen MIL- #100-025-596AV AR-15 National Match 30mm Mount, 3 #296-000-218AV Ruger American 6.7" SA 20 6B34B69 $ 36.00 #296-000-152AV Savage Rnd 6 /4" (17.1cm) Alum SA 0 6B61H00 $ 63.00 STD 1913 Picatinny cross-slots offer plenty of versatility in setting eye 1.3" High, 7B350C00​ ���������������������������� 350.00 Rifle® Back relief. Sight channel allows use of iron sights without removing the 1 #296-000-153AV Savage Rnd 6 /2" (16.5cm) Alum SA 20 6B61N00 $ 63.00 scope. Cutout above ejection port helps prevent case hangups. ab #296-000-215AV Ruger American 7.1" LA 0 6B34K69 $ 36.00 1 1 SPECS: 8620 steel, Parkerized, matte black finish. 5 /2" (14cm) long, 1 /2" Rifle® Back 7 (3.8cm) wide, 2" (5.1cm) tall. 11.6 oz. (329g) weight. All mounting hardware #296-000-154AV Rem. 5 /8" (15cm) Alum 0 6B43B00 $ 45.00 #296-000-216AV Ruger American 7.1" LA 20 6B34C69 $ 36.00 included. Minor fitting required. ® ® ® 870/100/1187 GG&G RUGER MINI-14 Rifle #100-005-275AV Scope Mount, 3K00FQJ​ ��������������������� $ 234.99 7 #296-000-090AV Savage w/Reg- 6" SA 0 6B34N69 $ 36.00 #296-000-155AV Mossberg 5 /8" Alum 1997 & 0 6B43A00 $ 45.00 RANCH RIFLE OPTIC MOUNTS Trigger 500/590/835 later 5 1 #296-000-197AV Howa 1500 6 /8" (16.8cm) Alum SA 0 6B61I00 $ 63.00 For Secure Installation Of Scope #296-000-091AV Savage w/Ac- 6 /2" SA 0 6B34H69 $ 36.00 5 Or Mini Red Dot With Plenty Of cuTrigger #296-000-198AV Howa 1500 6 /8" Alum SA 20 6B61H00 $ 63.00 HAVLIN MOSSBERG .22 RIMFIRE 5 Eye Relief #296-000-212AV Savage w/Ac- 7.5" SA 20 6B34F69 $ 36.00 #296-000-255AV Howa 1500 6 /8" Steel SA 0 6B104L00 $ 108.00 5 cuTrigger #296-000-256AV Howa 1500 6 /8" Steel SA 20 6B104Q00 $ 108.00 M22 SUPER SIDE SCOPE MOUNT No-gunsmithing aluminum 1 #296-000-213AV Savage w/Ac- 6.7" LA 0 6B34F69 $ 36.00 #296-000-253AV Howa 1500 7 /16" Alum LA 0 6B61L00 $ 63.00 Update Your Vintage Rimfire mount clamps to the receiver 1 notches for the fac-tory scope cuTrigger #296-000-254AV Howa 1500 7 /16" Alum LA 20 6B61B00 $ 63.00 With Your Choice Of Optics 1 rings to let you install the latest #296-000-214AV Savage w/Ac- 7.5" LA 20 6B34A69 $ 36.00 #296-000-241AV Tikka T3 7 /2" Alum - 20 6B61N00 $ 63.00 5 Weaver-style rail conforms to receiver tactical optics on your Ranch Rifle. cuTrigger #296-000-242AV Mossberg 6 /8" Alum - 20 6B61C00 $ 63.00 curvature and attaches to existing mount- Almost 6" long to provide plenty of versatility to position the optic 7 MVP 7.62 #296-000-175AV Savage Edge/Axis 7 /16" – 20 6B34A69 $ 36.00 ing holes, centering any diameter scope di- forward for long eye relief and quick target acquisition, while you 7 5 #296-000-176AV Savage Mark II 5 /8" – 0 6B34B69 $ 36.00 #296-000-243AV Mossberg 6 /8" Alum - 0 6B61K00 $ 63.00 rectly over the barrel. Lets you mount full-size scopes and red-dot optics. maintain a comfortable cheekweld. Machined relief cuts on the un- 3 (1 /8" ejection port) MVP 7.62 Provides enough clearance to keep original rear sights in place. Easy instal- derside ensure unimpeded cartridge ejection. Mini Red Dot model 7 7 accepts mini red dot holographic sights from Burris, Docter, JP, and #296-000-180AV Savage Mark II 5 /8" – 20 6B34N69 $ 36.00 #296-000-244AV Mossberg 5 /8" Alum - 0 6B61I00 $ 63.00 lation: remove bolt cover, if present, add rings and scope of choice. ab 7 3 SPECS: Aluminum, black anodized finish. Rail measures 4 /16" (11.3cm) Trijicon. Picatinny has a standard MIL-STD-1913 rail with 14 slots to 8 MVP 5.56 (1 / " ejection port) RIFLE 9 accept conventional Picatinny scope rings. ab 7 long, /16" (1.4cm) high. Fits following models with side-tapped receiver: 5 7 #296-000-245AV Mossberg 5 /8" Alum - 20 6B61L00 $ 63.00 #296-000-177AV Savage 93 (1 /8" 5 /8" – 0 6B34L69 $ 36.00 26B, 26C, 42A, 42B, 42C, 42M (all variants), 43, 44B, 44US (all variants), SPECS: 6061 T6 aluminum, mil-spec Type III hardcoat anodized, matte ejection port) MVP 5.56 46A, 46B (all variants), 46M (all variants), and most Wards-Westernfield black. Fits Ruger Mini-14 Ranch Rifle. Mounting screws, adapter plate (Red 5 7 1 5 #296-000-179AV Savage 93 (1 /8" 5 /8" – 20 6B34K69 $ 36.00 #296-000-246AV Ruger No.1 7 /2" Alum - 0 6B61Q00 $ 63.00 rifles (made by Mossberg) with side-tapped holes measuring 1 /8" (4.1cm) Dot model only), and instructions included. 1 ejection port) #296-000-247AV Springfield 5 /2" Alum - 0 6B61I00 $ 63.00 center-to-center. #336-000-035AV Mini Red Dot Mount, 6C38E74​ �������� $ 45.99 3 #296-000-101AV Tikka T3 7 /8" (18.7cm) – 0 6B34G69 $ 36.00 03A3/03A4 #100-001-258AV M22 Scope Mount, 6A22C10​ ����������������� $ 27.99 #336-000-036AV Picatinny Rail Mount, 6C38E63​ ������ 45.99

order on the web

Orders: 800-741-0015 brownells.com PAGE 259 KWIK-SITE NIGHTFORCE POWER CUSTOM RUGER® 10/22® RS PRODUCTS AK-47/AKM KWIK-MOUNT® ADAPTER BASE TAPERED PICATINNY BASES RECEIVER MOUNT AKM SCOPE MOUNT AK-301 Front- Lets You Use Weaver-Style Rings On Provides Extra Elevation For Versatile Mount For Compact Biased Lower Rail For Easy, Secure Installation 3 Any /8" Dovetailed Receiver Long-Range Shooting Scopes & Sights Of 30mm Red Dot Sight Handy one-piece, Weaver- Rugged, tactical bases cut Quickly attaches to factory Incredibly versatile mount- style conversion base lets you with MIL-STD 1913 Picatinny drilled and tapped 10/22 receivers. Six, cross slots provide the ver- ing system clamps directly to mount optics on any .22 caliber slots have built-in elevation satility to mount full size scopes, plus red dot sights or compact side rail of Kalashnikov-pattern 3 rifle with a /8" dovetailed receiver. Eight slots give you flexibility to adjustment for making long- scopes using Weaver-style rings. Silver anodized or hard coat, black rifles for “bank-vault” strong vary the ring spacing and mount a variety of different eye-relief range shots without exceed- finish matches factory receiver. ab attachment of optics. Unique SPECS: T6061 Aluminum, silver, anodized or hard coat, black finish. 4.75" design positions optic directly scopes. Made of aluminum to keep additional weight to a minimum ing your scope's adjustment range. Machined from steel billet for AK-303 Full AK-302 Rear-Biased with steel cross-bolt and clamping bar for a tight hold. ab extreme strength and recoil resistance. One piece bases enable (12cm) long. Includes screws and Allen wrench. Length Rail Lower Rail over the centerline to allow it RINGS & BASES SPECS: Aluminum with steel hardware, matte black finish. 1-Piece - 4.3" forward scope mounting and include an integral recoil lug that #713-122-101AV Silver 10/22 Rec'r Mnt, 3A15E36​ ����������� $ 16.79 to co-witness with iron sights (10.9cm) long. 2-Piece - .8" (2.1cm) long, each. contacts the front of the ejection port. ab #713-122-100AV Black 10/22 Rec'r Mnt, 3A15E36​ ����������� 16.79 and features a quick release #100-005-941AV 1-Piece Adapter Base, 8B27K08​ ���������� $ 30.99 SPECS: Steel, black, matte finish. Includes torx screws. 1-Piece approx. lever that allows the optic to 3 11 6 /4" (17.1cm) long. 2-Piece approx. 1 /32" (3.4cm) long each, sold in pairs. be removed and reinstalled without tools. Two-piece de- STOCK # FITS STYLE ELEVATION PRICE PRECISION ARMAMENT REMINGTON 700 AKM 30mm Reflex AKML Aimpoint sign gives options for mount- #524-000-007AV Rem 700 SA 1-Pc 20 MOA 2E116K00 $ 120.00 Optics Upper Micro Upper ing position and eye relief. Mount KINETIC DEVELOPMENT GROUP #524-000-015AV Rem 700 SA 1-Pc 40 MOA 2E116G00 $ 120.00 PICATINNY SCOPE RAIL Front Lower Mount gives 3" #524-000-008AV Rem 700 LA 1-Pc 20 MOA 2E116B00 $ 120.00 mounting space along the Lightweight Mount With front half of the receiver. Rear SIDELOK OPTIC MOUNT 2E116M00 #524-000-016AV Rem 700 LA 1-Pc 40 MOA $ 120.00 The Strength Of Steel & Lower Mount gives 3" mount- A Versatile, Adaptable, #524-000-011AV Rem 700 SA 2-Pc 20 MOA 2E87P00 $ 90.00 1 Only /3 The Weight ing space along the rear Truly Quick-Attach/Detach #524-000-012AV Rem 700 LA 2-Pc 20 MOA 2E87L00 $ 90.00 AKOG ACOG/BCO half of receiver. Full Length Scope Mount MIL-STD 1913 Picatinny rail is machined from lightweight Ten- Mount Upper Mount AKR Picatinny Lower Mount gives 6" mount- #749-012-028AV Savage Accu- 1-Pc 20 MOA 2E116Q00 $ 116.00 ® 1 Mount Upper Rail nalum 7068 alloy that gives the same strength as steel with only /3 Trigger SA ing space along the receiver. The Sidelok's user-configurable the weight. All contact surfaces are stress relieved and pre-ground AK310 Full Length Lower Rail fits Romanian M10 and Yugo OPAP #749-012-029AV Savage Ac- 1-Pc 20 MOA 2E116A00 $ 116.00 options make it one of the most versatile QD scope mounts avail- before final machining to exact MIL-STD 1913 dimensions. Integral and NPAP rifles. 30mm Upper Mount gives a single-ring attach- able. You can quickly clamp it to any Picatinny receiver rail, then cuTrigger LA recoil lug and elongated mounting screws let you position the rail so ment for 30mm red dot optic. AKML Upper Mount fits the Aimpoint remove it just as fast, with one hand, simply by pressing the release #749-012-026AV Winchester 1-Pc 20 MOA 2E133A00 $ 133.00 the lug will bear properly against the receiver to prevent the rail from T-1 and H-1. AKOG Upper Mount fits Trijicon ACOG sight system. button at the front. The Sidelok’s innovative locking system makes 70 SA moving even under aggressive recoil. Built in 20 MOA of elevation Complete system requires one upper mount and one lower mount. it virtually impossible to unintentionally release the mount. And for extended long-range shooting. All surfaces are fully chamfered, #524-000-006AV Winchester 1-Pc 20 MOA 2E133G00 $ 137.00 AKR Upper Mount gives Picatinny upper rail that fits onto any RS the cam lock system ensures the Sidelok will fit all Picatinny rails, with extra clearance over the ejection port. ab REgulate lower mount. All mounts sold separately. ab 70 LA ® even those that are out of spec. The rings can moved forward or SPECS: Tennalum 7068 alloy, hardcoat anodized, matte black finish. SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Front Lower 1 rearward to avoid interference with objective bells, turret knobs, Instructions and 6-48 mounting screws included. Short Action (SA) – 6 /2" 40 MOA REMINGTON 700 BASE - Mount – 6" (15.2cm) long, 2¼" (5.7cm) high. Rear Lower Mount - 5" (12cm) or magnification adjustment collars. They are CNC-machined and (16.5 cm) long, .380" (9.4 mm) high at front ring, 2.3 oz. (.65g) wt. Long Ac- long, 2¼" (5.7cm) high. Full Length Lower Mount – 6¼" (15.8cm) long, wire-EDM cut to be as precisely concentric as possible. Top- and One-piece base provides rock-solid tion (LA) – 7" (17.7 cm) long, .380" (9.4 mm) high at front ring, 2.5 (70g) wt. mounting and has 40 MOA of eleva- 2¼" (5.7cm) high. AK310 Full Length Lower Rail - 6" (15.8cm) long, 1.9" bottom-halves are machined together as a unit, and witness marks #100-011-239AV Rem 700 Picatinny Scope Rail, SA, ​ (4.8cm) high. 30mm Upper Mount – 1" (2.5cm) long, 2" (5cm) high. AKML help the user keep the correct top mated to its matching bottom. tion built-in to save your scope adjustments for long-range shots. 13 15 2D93K49 ���������������������������������������������������$ 112.99 Upper – 1 /16" (4.6cm) long, /16" (2.38cm) high. AKOG Upper Mount Type III hardcoat anodized finish. ab CNC machined from steel billet for extreme strength. 5 1 SPECS: Steel, black, matte finish. Includes 6-48 torx screws. Approxi- #100-011-240AV Rem 700 Picatinny Scope Rail, LA, ​ – 3 /8" (9.2cm) long,15/16" high. AKR Picatinny - 5 (12.7cm) long, 1 /4" #100-025-960AV 30mm Sidelok Optic Mnt, 7C193D38​ ��� $ 209.24 3 2D110J26 ������������������������������������������������� 112.99 (3.1cm) high. mately 6 /4" (17.1cm) long. For long (LA) or short actions (SA). #100-025-961AV 34mm Sidelok Optic Mnt, 7C193F38​ ����� 209.24 #100-011-182AV Rear Lower Mount, 2D121P00​ �������������$ 121.00 #524-000-015AS 1 Piece Rem 700 LA 40 MOA, ​ #100-025-962AV 1" Sidelok Optic Mnt, 7C193Q38​ ������ 209.24 2E116B00 ������������������������������������������������ $ 116.00 #100-011-183AV Front Lower Mount, 2D121P00​ ����������� 121.00 #524-000-016AS 1 Piece Rem 700 SA 40 MOA, ​ PRECISION REFLEX REMINGTON 7615 #100-011-181AV Full Length Lower Mnt, 2D121C00​ ����� 121.00 2E116I00 �������������������������������������������������� 116.00 #100-013-589AV AK310 Flull Lgth Lower Rail, 2D121M00​ ��� 121.00 PICATINNY RAIL SCOPE BASE #100-011-184AV 30mm Upper Mount, 2D65H00​ ��������� 65.00 #100-011-560AV AKML Red Dot Upper Mnt, 2D65A00​ �� � 65.00 MIDWEST INDUSTRIES AK-47/74 Mounts Tactical Sights ® ® SCOPE MOUNT NODAK SPUD RUGER 10/22 & Optics For Maximum #100-011-561AV AKOG Upper Mount, 2D73A00​ ����������� 73.00 Accuracy #100-011-749AV AKR Pctnny Mnt Upper Rail, 2D73J00​ �� 73.00 Fast On/Off Scope Mount For PICATINNY RAIL W/REAR SIGHT Precision machined, MIL-STD 1913 Picatinny rail allows mount- VZ 59 REAR-BIASED LOWER RAIL - fits VZ Kalashnikov Rifles ® Gives Your 10/22 A Picatinny ing optics and tactical sights for maximum accuracy. Low profile de- 58 rifles with mounting rail on side of re- Install and remove your scope with a Rail & Backup Rear Sight sign features fourteen cross-slots for easy ring spacing adjustments ceiver. Lower rail specially shaped to help put the optic near to the shooter’s eye, and twist of a lever with no loss of zero. Lightweight machined aluminum Machined aluminum Picatin- to accommodate different-length scope tubes. Four, steel, 8-40 AK-302 Rear-Biased windage adjustments let you position the side mount features the ASM Auto Lock System that can be removed ny rail fits on top of factory 10/22 Allen head screws secure rail to receiver for exceptional holding Lower Rail optic directly over center bore. Optic posi- then reinstalled in seconds without having to re-adjust or re-zero receivers to provide versatile mounting space for optics. Includes power. Precision machined from 6061-T6 aluminum, then hardcoat tion can be permanently staked in. Accepts all RS Regulate upper the scope. Fits AK 47 and AK74 rifles equipped with the built in AK side a windage/elevation-adjustable rear sight adjustable for elevation anodized for added strength. Easy installation using factory pre- optic mounts. ab receiver interface. Mount keeps the scope low, directly above the and windage. Simply screws into factory holes standard in 10/22 drilled scope base holes, requires no alterations to rifle. Accepts SPECS: 6061 T-6 Aluminum, hardcoat anodized, matte black. 4.7" top cover for fast target acquisition. Scope rail is built to 1913 Pica- receiver with the included Torx head screws. Gives a sight picture both Picatinny and Weaver-style rings. ab (11.9cm) long. 2.1" (5.3cm) high. tinny specs and will accept all Picatinny scope rings or mounts. ab similar to an AR-15 with 10-position windage drum. ab SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 6" (15cm) SPECS: 6061 aluminum, anodized finish, black, 6¾" (17cm) long, 7.3 oz.(206g) wt. SPECS: Machined T6 6061 aluminum billet, hardcoat anodized, matte long. 1.4 oz. (40g) weight. Includes steel mounting screws. Fits all Rem- #100-013-590AV VZ 58 Rear-Biased Lower Rail, ​ #100-009-103AV MI AK-47/74 Scope Mnt, 2A109E99​ �� � $ 109.99 black finish. Includes 4 Torx screws. ington 7615 pump action rifles with factory drilled and tapped receivers. 2D121L00 �������������������������������������������������$ 121.00 #100-012-174AV 10/22 Rear Sight w/Rail, 4C66D44​ �����$ 78.99 #714-000-009AV Rem 7615 Picatinny Base, 4A49I45​ � $ 62.99

S&K INSTA SCOUT MOUNTS SAMSON AK-47 REAR SIGHT RAIL intermediate eye relief scopes over the handguard for fast, both-eyes- Fast To Install; No Permanent Easy to install - requires no permanent modification to the rifle. open aiming. Requires no drilling, tapping or permanent alterations to No-Gunsmithing Optic Mount Channel through the length of the mount has a built-in rear sight Alterations the rifle. Accepts Weaver-style rings and accessories. ab With Backup Rear “Iron” Sight that works with factory front sight for iron sight backup in the event SPECS: Aluminum, anodized, black, matte finish. May not fit all variants of Lightweight, machined alu- An easy way to add a tactical of optic damage, failure, or battery run-down. ab models listed. Includes instructions. 1 minum mounts deliver the in- optic to your Kalashnikov, this steel mount replaces the rear sight on SPECS: Machined steel, black oxide finish. 3 /2" (8.9cm) long. 3.5 oz. (99g)

RIFLE #794-000-008AV Schmidt Rubin K31 Mnt, 4G52J45​ ������� $ 69.99 creased accuracy of Scout Rifle optical sighting without changing or any AK-pattern rifle to enable mounting of a red dot or holographic wt. Rail fits all AK-pattern rifles with a rear leaf sight. All mounting hard- altering the original configuration of your prized military rifle. All mod- #794-000-009AV Mauser 98 K Mount, 4G47I45​ ��������������� 62.99 sight. MIL-STD 1913 Picatinny slots provide a rock-solid attachment ware included. els replace the standard issue rear sight assembly, so you can mount #794-000-010AV Yugo 48, 4G52F45​ ����������������������������������� 69.99 point for the optic that won’t shift during extended-fire sessions. #100-006-266AV AK-47 Rear Sight Rail, 1B107G50​ ����� $ 118.75

GUARANTEED. FOREVER.®

PAGE 260 SINCE 1939 Office/Tech: 641-623-5401 SADLAK INDUSTRIES M14/M1A SPUHR SOUTH SHORE TACTICAL SOLUTIONS RUGER® 10/22® TACTICAL SCOPE MOUNT IDEAL SCOPE MOUNT SYSTEM TARGET SCOPE BASE PICATINNY SCOPE MOUNT Maximum Support, Superior Multiple Accessory Attachment Points Standard Mount Target Standard & 15 MOA Models RINGS & BASES Strength-To-Weight Ratio Unimount & A Built In Level Sights Or External Precision CNC Helps keep the weight down when Adjustment Scopes machined from light- adding heavy tactical optics to your Standard Revolutionary scope mount allows On Long Range Rifles weight, 6061 T6 alu- M14/M1A. Three-point design clamps you to attach multiple accessories to it minum with MIL-STD 1913 Picatinny rail pattern allows mounting a down solidly, without alteration, to the while an integrated level provides accu- Versatile, steel bas- variety of sights. Easily accommodates different-length scope bodies side receiver ring, charger guide dove- rate readings of the rifle’s cant. Mount es accept target front and provides generous adjustment for eye relief. Drilled to fit the fac- tail and receiver mount lug. Precision- has seven different locations where ac- sights and external adjustment scopes from Lyman, Unertl and tory hole spacing and includes mounting screws. Accepts both Pica- Airborne 3 cut rail includes 5° angle milled on the cessories or short Picatinny rails can be others that require a /8" dovetail base. Contoured bottom radius tinny and Weaver-style rings. Hardcoat anodized for durability. Avail- underside for easy case ejection without hang-ups; accepts Picatin- directly attached, including two at 45° provides a tight fit to barrel, prevents side movement. Does not fit able with 0 MOA base, or 15 MOA base to help maintain your scope’s ny and Weaver-style rings. Open sight channel gives unobstructed angle. Built in level will not shift and has Redfield external adjustment scopes. ab full elevation adjustment range when shooting at long range. ab 5 9 5 view of back-up iron sights. Standard model is available in three no protruding parts or edges to get in SPECS: 1018 steel, blue, matte finish. 1 /16" (3.5cm) long. /16" bottom radius. SPECS: 6061 T6 aluminum, hardcoat anodized, black, matte finish. 4 /8" 13 11 strength to-weight combinations. Steel model is fully machined the way. Cut at a 45° angle, rings have .860" and .562" hole spacings. Includes 6-48 screws. (11.7cm) long, /16" (2.1cm) wide, /32" (8.7mm) high from top of receiver. from stress-relieved 4142 chrome-moly steel barstock, hardened low, flat areas on the top and sides for an #100-003-819AV 0 MOA Scope Mount, 8K28A00​ ������� $ 28.00 unobstructed view of the scope turrets. to Rc 28-32 for maximum strength. Aluminum model is machined STOCK # HEIGHT PRICE #100-003-820AV 15 MOA Scope Mount, 8K30E00​ ����� 30.00 from 7075 bar stock aluminum and hardcoat anodized matte black Lines milled into the top and right side of #841-105-175AV .175" Base 1D00DCN $ 14.49 for durability. Airborne model features a lightweight skeletonized rings serve as indicator lines for the scope. Machined from a single 3 #841-105-225AV .225" Base 1D00GAC $ 11.49 frame with seven, /8" diameter CNC machined lightening holes in piece of aluminum, this extremely sturdy mount will not flex under the top of the rail for reduced weight without sacrificing strength. heavy recoil, protecting the scope from being damaged. Mount #841-105-275AV .275" Base 1D00IBC $ 13.89 Machined from chrome-moly steel bar stock and heat-treated to Rc comes with a 10° indexing wedge that slips between the scope #841-105-325AV .325" Base 1D00QWQ $ 14.49 ULTIMAK M14/M1A/M1 GARAND 50 for superior strength. Mil-Spec Parkerized finish resists abrasion and mount to insure the scope is perfectly level. Some items ship #841-105-425AV .425" Base 1D10F71 $ 13.69 and corrosion. Adopted by the 101st Airborne. ab directly from manufacturer. Please allow 2 additional business days FORWARD OPTIC MOUNT 7 3 SPECS: 5 /16" (13.8cm) long, 2" (5.1cm) wide, 1 /4" (4.4cm) high. Includes for shipping. mounting hardware, Allen wrenches, and complete instructions. Steel SPECS: 7075 T651 aluminum, sealed hardcoat anodized, matte black. For Easy Forward - 4142 chrome-moly steel, hardened to Rc 28-32, mil-spec manganese Height measured from the top of the rail to the center of the scope. Mounting Of Optics phosphate Parkerized, matte black. 11.8 oz. (334g) wt. Titanium - Tita- nium, black, nitride finish. Base hardness Rc 34, surface hardness Rc 85. STOCK # DIA. HEIGHT LENGTH MOA PRICE One-piece aluminum Picatinny rail mount replaces the handguard - no gunsmithing! - to 7.3 oz. (207g) wt. Aluminum - 7075 aircraft aluminum bar stock, hard coat PICATINNY RAIL MOUNT STOCK # DIA. HEIGHT LENGTH MOA PRICE anodized, black, matte finish. 4.3 oz. (123g) wt. Airborne - Steel, chrome- give your rifle a mounting platform for an intermediate eye relief #100-018-266AV 30mm 1.2" 5" 0 1E410E00 $ 410.00 FITS TRG DIRECT MOUNTS moly, Parkerized, black, matte finish. 9.4oz. (266g) wt. scope, red dot, holographic or reflex sight. Low profile enables co- #100-018-299AV 30mm 1.4" 4.9" 24 1E410N00 $ 410.00 #100-005-434AV Steel Scope Mount, 6A214E36​ �����������$ 252.99 #100-011-207AV 30mm 1.2" 5" 20.6 1E410N00 $ 410.00 witnessing of the factory sights with red dot sights. Recoil lug, plus #100-018-300AV 34mm 1.4" 4.7" 24 1E410J00 $ 410.00 dual clamps attach quickly to any standard weight barrel without #100-002-407AV Aluminum Scope Mnt, 6A131M91​ ������� 155.99 #100-018-267AV 30mm 1.3" 5" 0 1E410N00 $ 410.00 #100-018-268AV 30mm 1.5" 5" 0 1E410C00 $ 410.00 #100-018-301AV 34mm 1.4" 4.7" 44.4 1E410F00 $ 410.00 modifications. Mount remains in place during field stripping. ab #100-003-841AV Airborne Scope Mount, 6A247P34​ ����� 290.99 SPECS: Aluminum, hardcoat anodized, matte black. Mounting hardware #100-018-269AV 30mm 1.5" 5" 20 1E410E00 $ 410.00 #100-018-302AV 34mm 1.7" 4.7" 24 1E410J00 $ 410.00 9 and instructions included. M14/M1A - 12 /16" (31.9cm) long. 12.4 oz. (352 1E410Q00 3 #100-018-270AV 34mm 1.2" 4.7" 0 1E410Q00 $ 410.00 #100-018-303AV 34mm 1.7" 4.7" 44.4 $ 410.00 g) wt. Fits M14/M1A family of rifles. M1 Garand - 9 /8" (23cm) long. 6.5 #100-011-208AV 34mm 1.2" 4.7" 20.6 1E410D00 $ 410.00 FITS SAUER oz.(184g) wt. SMITH ENTERPRISE M14/M1A #100-018-271AV 34mm 1.2" 4.7" 31 1E410K00 $ 410.00 #100-018-304AV 30mm 1.4" 4.7" 20.6 1E410G00 $ 410.00 #100-002-948AV M14/M1A Forward Optic Mount, ​ PICATINNY SCOPE MOUNT #100-018-272AV 34mm 1.2" 4.7" 44.4 1E410L00 $ 410.00 #100-018-305AV 34mm 1.4" 4.7" 31 1E410P00 $ 410.00 5K162I00 ������������������������������������������������� $ 200.99 #100-018-273AV 34mm 1.3" 4.7" 0 1E410Q00 $ 410.00 #100-007-347AV M1 Garand Forward Optic Mount, ​ All Steel, Solid, Three-Point 5K150Q97 ����������������������������������������������� 187.99 #100-018-274AV 34mm 1.5" 4.7" 0 1E410C00 $ 410.00 Attachment ACCESSORY INTERFACE MOUNTS - #100-018-275AV 34mm 1.5" 4.7" 10.3 1E410F00 $ 410.00 Mounts allow you to customize your Spuhr Fully-machined hardened steel Pica- #100-018-276AV 34mm 1.5" 4.7" 30 1E410G00 $ 410.00 mounts and scope rings. with the addition tinny mount with three-point mounting, #100-018-277AV 34mm 1.5" 4.7" 44.4 1E410A00 $ 410.00 of sights or other accessories. Compact provides a stable, secure base for mount- Spacers permit secondary sights or other ULTIMAK M1 CARBINE ing large objective scopes. Easily clamps to the charger guide dove- #100-018-278AV 34mm 1.5" 5.8" 20.6 1E410N00 $ 410.00 accessories to be positioned at the opti- tail and receiver mount lug without modifications to rifle. Heavy, #100-018-279AV 34mm 1.5" 5.8" 20.6 1E410F00 $ 410.00 Spacer Cosine Indicator mum height. The Angle Cosine Indicator M6-B FORWARD OPTIC MOUNT forward locking screw gives rock solid stability at the receiver ring. 1E410J00 #100-018-280AV 34mm 1.5" 5.8" 40 $ 410.00 attaches directly to the mount and is avail- Cantilever Design Mounts Sight channel allows back-up use of iron sights without removing #100-018-282AV 34mm 1.7" 4.7" 0 1E410G00 $ 410.00 3 able in a QD model that can be removed scope. Available in Standard 5 /8" or Extended 7" length for added Scopes & Optics To Your #100-018-283AV 34mm 1.9" 4.7" 0 1E410D00 $ 410.00 during CQB or similar situations. Red Dot sight mounting options. Both models accept Weaver-style rings. ab Picatinny .30 Carbine Interface allows you to directly mount a ho- SPECS: 4140 steel, nitride finish, black. Hardened to Rc 60-62. Standard #100-018-284AV 34mm 1.9" 4.7" 44.4 1E410B00 $ 410.00 Rail 3 lographic sight to the top or side of the ISMS. Get the full accuracy - 5 /8" (13.6cm) long. 1.875" (4.7cm) high. 10.9 oz (310 g) wt. Extended - 7" #100-018-285AV 35mm 1.2" 5.5" 0 1E410Q00 $ 410.00 3 The short Picatinny Rail sections mount potential from your M1 (17.7cm) long, 1.85" (4.7cm) tall. 15.3 oz. (435g) wt. Tactical - 5 /8" long, #100-018-286AV 35mm 1.2" 5.5" 20.6 1E410K00 $ 410.00 directly to the ISMS and provide a platform 1.875" high. 13.3 oz. (378g) wt. Carbine by replacing its handguard with a reliable, CNC-machined #100-018-287AV 35mm 1.3" 5.5" 0 1E410L00 $ 410.00 for attaching additional accessories. Ships #851-000-001AV Std. M14/M1A Pctnny Mnt, 1E00GXA​ ��$ 316.99 mount for extended eye relief scopes, red dot, reflex, and laser #100-018-288AV 35mm 1.5" 5.5" 0 1E410B00 $ 410.00 directly from manufacturer. Please allow 10 Red Dot sights, or tactical accessories. Low profile rail uses 1913 Picatin- #851-000-061AV 7" M14/M1A Pctnny Mnt, 1E00HRS​ ��� 313.99 Mount #100-018-290AV 35mm 1.2" 5" 0 1E410N00 $ 410.00 additional business days for shipping. ny pattern; provides excellent stability. Dual, high-strength, steel SPECS: 7075 aluminum, hardcoat anodized, matte black. #100-018-291AV 35mm 1.5" 5.5" 0 1E410G00 $ 410.00 clamps secure mount to barrel, forward of the gas block. No need #100-018-250AV 4mm Spacer , 1E30H00​ ������������������������ $ 30.00 to remove standard issue iron sights and will not interfere with case #100-018-292AV 35mm 1.3" 5.5" 0 1E410H00 $ 410.00 #100-018-251AV 10mm Spacer, 1E30N00​ ������������������������ 30.00 ejection. ab #100-018-293AV 35mm 1.2" 5.5" 20.6 1E410N00 $ 410.00 1 ULTIMAK AK-47 SCOPE MOUNT #100-018-255AV ACI Interface for QD, 1E116E00​ ���������� 116.00 SPECS: Mount - 6061-T6 aluminum, hard anodized, matte black. 8 /6" #100-011-209AV 38mm 1.5" 4.7" 20.6 1E410B00 $ 410.00 (20.5cm) long. Clamps - 4140 steel, matte blue. Fits standard, G.I. pat- #100-018-256AV ACI Interface Non QD, 1E73N00​ ���������� 73.00 Low Mount Lets You Use PICATINNY (AR) CANTILEVER MOUNT tern, M1 carbines without alteration. May require minor stock inletting on #100-018-257AV Delta Point Interface, 1E63F00​ ������������ 63.00 Optics Or Iron Sights #100-018-297AV 30mm 1.26" 5.5" 0 MOA 1E00JMB $ 450.00 synthetic and I.A.I. stocks. Will not fit Universal brand carbines. #100-018-258AV Delta Point Interface, 1E63G00​ ���������� 63.00 #100-018-295AV 30mm 1.46" 5.9" 0 MOA 1E450N00 $ 450.00 #100-001-780AV M6-B Forward Optic Mount, ​ Lightweight, aluminum #100-018-259AV DR-Burris Interface, 1E63F00​ �������������� 63.00 5K75C92 �����������������������������������������������������$ 95.99 mount replaces the gas tube to maintain scope alignment and pre- #100-018-298AV 34mm 1.26" 5.5" 0 MOA 1E410F00 $ 410.00 #100-018-260AV Aimpoint Micro Interface, 1E73E00​ ���� 73.00 vent shifting zero. Weaver-style base sets below the line of sight, no #100-018-296AV 34mm 1.46" 5.9" 0 MOA 1E450D00 $ 450.00 #100-018-252AV .39" H x 2.16" L Picatinny Rail, ​ RIFLE need to remove mount to use iron sights. Issue sights can be viewed #100-018-263AV 30mm 1.4" 4.9" 20.6 1E410C00 $ 410.00 directly through the red dot and reflex scopes. ab 1E63M00 ���������������������������������������������������� 63.00 7 #100-011-211AV 34mm 1.4" 5.9" 20.6 1E450L00 $ 450.00 SPECS: 6061-T6 Aluminum, black, matte finish. 6 /8" (17.5cm) long. 6.7 #100-018-253AV .55" H x 2.95" L Picatinny Rail, ​ Follow Us • Friend Us • Like Us ACCURACY INTERNATIONAL DIRECT MOUNT oz. (189 g) wt. Fits all 7.62x39 caliber rifles. Installation may require minor 1E63L00 ������������������������������������������������������ 63.00 Go online for special promotions, contests and news. inletting to handguard. #100-018-261AV 34mm 1.4" 4.7" 20.6 1E410F00 $ 410.00 #100-018-254AV .79" H x 2.95" L Picatinny Rail, ​ #100-000-497AV AK-47 Scope Mount, 5K84K97​ ������������ $ 99.99 #100-018-262AV 34mm 1.4" 4.7" 44.4 1E410D00 $ 410.00 1E63Q00 ���������������������������������������������������� 63.00 Leave your comments or suggestions!

order on the web

Orders: 800-741-0015 brownells.com PAGE 261 ULTIMAK MINI-14®/MINI THIRTY® WEAVER REMINGTON 700 XS SIGHT SYSTEMS B-SQUARE SPORT UTILITY RINGS SCOUT SCOPE MOUNT TACTICAL MULTI-SLOT SCOPE BASE SCOUT SCOPE MOUNT Economical Rings For Mounting Scopes On Increases Mounting Options Provides Wide Field Of View & Weaver-Style Bases For Hunting Or Tactical Rifles Fast Targeting Use Iron & Optic Sights Without Reconfiguration Puts a long eye relief scope just ahead of the receiver. Attaches Strong, lightweight alu- One-piece, precision ma- with two screws and accepts Weaver-style rings. Models 099 fits minum rings secure scope to Low profile mount clamps directly to the barrel for added sta- chined Weaver rail lets you mount scopes, red-dot sights, ghost- large-ring Mauser 98 military barrels (.980" O.D. just forward of re- any Weaver-style or similar bility. Positioned below the line of sight - no need to use a raised ring sights, and other optics using Weaver-style rings. Plenty of ceiver) and requires Acraglas® for installation (included). For com- dovetail base. Extra length maximizes contact surface between cheekpiece for proper hold. MIL STD 1913 Picatinny rail. No gun- cross-slots allow optimal ring spacing for a wide range of scopes mercial bolt action sporters with tapered barrels, order 106 mount; scope and rings for exceptional gripping force to prevent scope including compact, full-size, and extra-long scope tubes. Low- 3 smithing, drop-in installation. ab requires turning barrel to 1.05" dia. for a minimum length of 1 /4" movement under recoil. Four, steel, hex-head screws secure the SPECS: 7075-T6 aluminum, Mil-Spec hardcoat anodized, matte black fin- profile, open center design allows use of front sight when optics forward of the receiver. ab ring halves, while a cross-bolt locks the clamping block securely to 3

RINGS & BASES are removed. Lightweight aluminum reduces weight without com- ish. Includes mounting screws and illustrated instructions. Mini-14 - 10 /8" SPECS: 6063 T6 Aluminum, black, anodized finish. 6" (15.2cm) long. 3.2 oz. (90 the base. Hex wrench included. Models available for 1" and 30mm (26.4cm) long. Fits Standard and Ranch rifles. Fits rifles with pre-580 serial promising strength. Hardcoat anodized for additional strength and g) wt. Includes instructions. Measure barrel just forward of receiver for fitting. scope bodies. Sold in pairs. wear resistance. Attaches to factory drilled and tapped receivers number prefix. Mini Thirty - Fits all Mini Thirty rifles manufactured before #006-109-099AV 099 Military Mount, 6K60F67​ ���������������$ 63.90 SPECS: Aluminum, anodized, matte black. Fits Weaver-style bases. Height 2008 with factory original barrel. Late Model 14/Thirty – Fits Mini-14 rifles using the included steel mounting screws. ab measured from top of base to inside bottom of ring. 1" Low - .165" SPECS: Aluminum, anodized finish, matte black. Steel mounting screws. #006-109-106AV 106 Sporter Mount, 6K60M66​ ��������������� 63.90 made since 2008 and Mini Thirty rifles from early production to present, 7 1 (4.2mm). 1" Medium - .335" (8.5mm). 1" High - .695" (17.7mm). 30mm both with factory original barrels. Short Action (SA) - 5 /8" (14.9cm) long. Long Action (LA) - 6 /4" (15.8cm) Medium – .330" (8.4mm). long. Fits Rem 700, 78, 40X-L, 721, and 725. Accepts Weaver-style rings. #100-000-960AV Mini-14 Scout Mount, 5K131J15​ �������� $ 140.99 #100-003-586AV Low 1" Rings, 6K8Q61​ �����������������������������$ 10.19 #955-000-137AV Rem. 700 SA Base, 5E15G93​ �������������$ 18.79 #100-002-790AV Mini Thirty Scout Mnt, 5K114C61​ ������ 134.99 #100-003-587AV Medium 1" Rings, 6K7H94​ ��������������������� 9.29 #955-000-136AV Rem. 700 LA Base, 5E15L79​ ��������������� 18.59 XS SIGHT SYSTEMS LEVER ACTION #100-009-314AV Late-Model Mini-14/Thirty Scout #100-003-588AV High 1" Rings, 6K7Q96​ ��������������������������� 9.39 Mount, 5K130G99​ �������������������������������� 140.99 LEVER SCOUT MOUNT™ #100-003-553AV Medium 30mm Rings, 6K8B66​ ������������� 10.19 Mounts Scope Over Barrel For Fast Sighting WEIGAND COMBAT RUGER® RIFLE Lightweight, Weaver-style ONE-PIECE SCOPE MOUNT mount positions an extended eye relief scope forward of the receiver for ® ® quick, both-eyes-open sighting. Weaver-style base features multiple VOLQUARTSEN RUGER 10/22 Lots of Slots for Flexible Ring cross slots for attaching a wide range of electronic and optical sights. XS SIGHT SYSTEMS Spacing; Drop-On Installation Mounts to existing holes and rear sight dovetail. Sets low to allow use of BARREL & RECEIVER SCOPE BASE iron sights without removing mount. Requires no modifications to rifle. MARLIN LEVER ACTION LEVER RAIL Cantilever Or Receiver Provides additional flexibility Marlin models available for 1895 Guide Gun, 1894 and 336 rifles. Win- when mounting shorter scopes or chester fits Model 94’s with rear sight dovetail 4" forward of receiver. ab Provides Flexible Mounting Mount Design Gives electronic sights. Requires no modi- Of Optics & Sights Stability & Accuracy SPECS: Aluminum, black, matte finish. 8" (20.3cm) long. Includes instruc- fications to gun; quickly attaches to tions, plastic punch, hex wrench and Loctite®. Winchester also includes ® ® Lightweight scope Mini-14 Ranch Rifle, Mini Thirty , PC9/PC40 carbines, Deerfield bedding compound. Two, highly functional ® rail mounts to Marlin carbine, and 10/22 Magnum. Positions the scope low over the re- #006-000-020AV Marlin 1895 Scout Mount, 6K58D00​ ���$ 63.90 designs for the Ruger ceiver for improved balance and better eye alignment. Lightweight centerfire lever gun 10/22. Barrel Mount - Attaches to the barrel; cantilevers rearward, aluminum keeps weight to a minimum. Accepts Picatinny rings. ab #006-000-031AV Marlin 1894 Scout Mount, 6K58B00​ ��� 63.90 without drilling and over the top of the receiver. Scope stays aligned with the bore, di- SPECS: Aluminum, black anodized finish. 5" (12.7cm) long. 2.6 oz. (74 g) wt. #006-000-032AV Marlin 336 Scout Mount, 6K58I00​ ������� 63.90 trapping. Accepts Weaver-style or Picatinny accessories, including minishes the effect of tolerance stacking between the receiver and #957-000-053AV Picatinny Rifle Mount, 7E45A13​ ���������� $ 49.99 #006-000-035AV Winchester 94 Scout Mnt, 6K61D21​ ��� 67.50 the Marlin 1894, 1895 or Marlin 336/308MX Lever Rail Ghost Ring set slip-in barrel. Installation requires drilling and tapping of barrel. Re- (above). Extra-long rail gives plenty of versatility in mounting scope ceiver Mount - For tightly fitted or threaded barrels. Raised design 10/22® SCOPE MOUNT - Fast, directly over the receiver or forward over the barrel for intermediate provides the proper height and eye relief for stocks equipped with simple, scope base installation for eye relief optics or red dot sights. Requires removal of factory rear Monte Carlo combs or raised cheekpieces. Same hole pattern as any factory drilled Ruger 10/22 rifle. sight. Gunsmith installation recommended. ab factory mount. ab Lightweight, aluminum scope base XS SIGHT SYSTEMS RUGER GSR SPECS: Aluminum, black, matte finish. 11" (27cm) long, .830" (21mm) SPECS: Aluminum, anodized, matte black (MB) or matte silver (MS) finish. matches the factory hole pattern wide. 3 oz.(85g) wt. Includes mounting hardware. 1 3 RUGER SCOUT RIFLE RAIL Barrel Mount - 8" (20cm) long, 2 /2" oz. (70g) wt. Receiver Mount - 4 /4" and accepts Weaver-style rings. Black anodized finish comple- #006-000-170AV Marlin 1894 Lever Rail, 6K58D00​ �������� $ 63.90 (12cm) long, 2 oz. (56 g) wt. Accepts Weaver-style rings. ments the factory finish. ab Rugged, Full-Length 3 7 #006-000-151AV Marlin 1895 Guide Gun Lever Rail, ​ SPECS: Aluminum, black anodized. 4 /4" (12cm) long, /8" (22mm) wide, .8 #930-122-300AV MS 10/22 Barrel Mount, 3Z00INM​ ������ $ 43.99 Rail With Open Sight 6K58L00 ���������������������������������������������������� 63.90 oz. (24g) wt. Screws included. #930-122-302AV MB 10/22 Barrel Mount, 3Z35D15​ ������ 42.99 For The GSR #006-000-165AV Marlin 336/308MX Lever Rail, ​ #957-106-010AV 10/22 Base, Black, 7E19B97​ �������������������$ 25.99 #930-000-035AV MB 10/22 Receiver Mnt, 3Z24D51​ ������ 29.99 This full-length, Picatinny rail bolts right on to the Ruger Gunsite 6K58L00 ���������������������������������������������������� 63.90 ® 1 10/22 & 77/22 PICATINNY SCOPE MOUNT - Machined alumi- Scout Rifle (GSR) with no gunsmithing required. The rugged, 11 /2" num mount installs easily on your rail provides a stable platform for standard optics over the receiver MARLIN 1894/1895/336/308MX LEVER RAIL SIGHT SYSTEM rifle’s receiver. Made to Picatinny or for Intermediate Eye Relief scopes mounted farther forward in - Convenient kit combines the specifications to give you a rugged, the classic scout configuration preferred by Jeff Cooper. A built-in, lightweight Lever Rail one-piece stable platform for your optics. Elev- adjustable rear aperture sight provides a handy backup in case the scope rail with backup iron sights ® en cross slots ensure optimum scope placement for perfect eye primary optic fails. Fits Ruger GSR only. ab for mounting on your Marlin lever VOLQUARTSEN 10/22 1 rifle without drilling and trapping. relief. Screw holes line up precisely with factory receiver scope SPECS: Aluminum, matte black anodized. 11 /2" length. Includes mounting EXTENDED PICATINNY SCOPE MOUNT base hole pattern for quick, simple installation. Accepts Picatinny hardware and threadlocker. Rear ghost ring is fully adjustable or Weaver-style rings. ab #006-000-175AV Ruger Scout Rifle Rail, 6K88F54​ �����������$ 93.60 for windage and elevation, with 3 Maximum Versatility For SPECS: Aluminum, black, matte, anodized finish. 10/22 - 4 /4" (12.07cm) interchangeable .191" and .230" di- 1 1 1 ameter apertures for fine-tuning accuracy. One-piece front sight Mounting Bigger Optics long, /2" (12.7mm) tall from top of receiver. 77/22 - 5 /8" (13cm) long, /2" tall from top of receiver. Screws included. has .100" wide white-line post. ab CNC machined, alumi- #957-000-067AV 10/22 Pic Scope Base, 7E21Q41​ �����������$ 28.99 SPECS: Lever Rail - Aluminum, black, matte finish. 11" (27cm) long, .830" YANKEE HILL MACHINE AR-15/M16/AR-308 (21mm) wide. 3 oz. (85g) weight. Includes mounting hardware. Sights - num alloy mount installs eas- #957-000-077AV 77/22 Pic Scope Base, 7E53C62​ ����������� 56.99 ily on 10/22 receivers, is made to Picatinny specifications and gives Steel, matte black finish. Front sight: .100" wide, .528" high measured from ® ® SCOPE RISER you a rugged, stable platform for your optics. .480" tall, versatile, 77/22 & 77/44 SCOPE MOUNT - top of barrel to top of blade. 1895 fits Marlin 1895 with .700" (17.8mm) and extended length of 7" allows plenty of mounting space for your Clamps to factory ring cuts; keeps Minimalist Design 1" (2.5cm) c-to-c front ramp screws. 336 fits round barrel Model 336 only. choice of accessories, especially scopes with large objective lenses. mounting height low and over the Raises Optics ½" #006-000-167AV Marlin 1894 Lever Rail Sight System, ​ Extends 2" forward of the receiver with 17 cross slots to choose from. receiver. Lots of slots for Weaver-style 6K153A70 ������������������������������������������������ $ 162.00 rings. 77/22 fits .22 LR and .22 Mag- This streamlined mount raises any scope or red dot sight ½" for easi- Four mounting screws included. Available in black B, or silver S. No er eye alignment without adding needless bulk or weight to the gun. Pre- #006-000-166AV Marlin 1895 Lever Rail Sight System, ​ gunsmithing required. ab num. 77/44 also fits 77/22 Hornet. ab 6K153E70 �������������������������������������������������� 162.00 SPECS: Aluminum, black or silver, matte finish. 5" (12.7cm) long. cision-machined, 5½" base mounts quickly and easily to any Picatinny SPECS: CNC machined aluminum, black (B) and silver (S). 7" (17.8cm) rail to provide a secure and stable base for your sighting equipment. ab #006-000-168AV Marlin 336 Lever Rail Sight System, ​ 7

RIFLE 8 #957-000-046AV 77/22 Scope Mount, Blk, 7E39F13​ �������� $ 49.99 long, / " (2.2cm) wide, .480" (1.2cm) tall. SPECS: Aircraft grade aluminum, hardcoat anodized matte black. 5¼" 6K153K70 ������������������������������������������������ 162.00 #930-000-044AV Extended Mount, S, 3Z44N23​ ���������������$ 52.99 #957-000-047AV 77/22 Scope Mount, Silver, 7E39J13​ �� �� 49.99 length, ¾" total height, 1¼" width. Raises equipment ½". #006-000-169AV Marlin 308MX Lever Rail Sight #930-000-045AV Extended Mount, B, 3Z45L58​ ��������������� 53.99 #957-000-056AV 77/44 Scope Mount, Blk, 7E39F13​ ������ 49.99 #100-010-687AV 227A Scope Riser, 9A31B05​ ������������������ $ 34.99 System, 6K169L57​ �������������������������������� 179.10

GUARANTEED. FOREVER.®

PAGE 262 SINCE 1939 Office/Tech: 641-623-5401 BADGER ORDNANCE BURRIS SIGNATURE RINGS BURRIS WEAVER-STYLE “ZEE” RINGS 34mm & 35mm TACTICAL RINGS POS-ALIGN Pivoting Synthetic Inserts End PICATINNY SCOPE RINGS Made Of Steel Easy Installation & Removal; Scope Misalignment Precision machined STEEL, streamlined rings Robust, Versatile, Affordable Rings For to fit Weaver style bases. Gives that “custom” look. RINGS & BASES Heavy Duty To Stand Up To Unique system puts an end to dinged, dam- Elegant, rounded contours. aged, and misaligned scope tubes, plus holds Tactical & Sporting Rifles Powerful Recoil SPECS: Steel; polished blued (Pol. Blue), matte blued scopes firmly against recoil. Steel outer rings with These rings are precision machined to true (Safari) or satin, nickel-plated (Silver). 3 oz. (85g) pair. Precision-machined, tac- self-centering, synthetic inner rings, adjust to slight mounting varia- MIL-STD 1913 specs to fit Picatinny-type bases Height shown is from top of base to inside bottom of tical ring sets provide strong, tions so any 1" or 30mm scope is perfectly aligned. On bases with- such as Brownells Modular Flattop Riser Mount and Picatinny Scope ring. 1" (2.5cm) dia.: Low - .135" (3.4mm), Med. - .245" (6.2mm), High - 450" rigid mounting to securely hold out windage adjustment you get maximum usage of the scopes’ Bases. No special wrenches needed for installation. Underside of (11.4mm), 30mm (1.1") dia.: High - .460" (11.6mm). large- diameter scope tubes, like Schmidt & Bender, on hard-re- internal windage/elevation adjustment, closer lens alignment, and ring is undercut with a rounded radius that offers extra clearance coiling guns. Robust, hex clamping nuts and Weaver-style clamps clear, sharp images. for finger tightening the nut and for final tightening with a standard STOCK # HEIGHT SIZE FINISH PRICE lock rings tightly on MIL-STD 1913 Picatinny bases. Ring cap is se- SPECS: Rings - Steel, 1" (2.5cm) and 30mm I.D. Available in polished blue socket or flat-blade screwdriver. Extra-strong U.S.-size hex nuts cured with Torx screws. Each set is serial-numbered to guarantee a (PB), matte blue (MB), or satin nickel (SIL) silver. Rings sold in pairs and have a deep slot that provides maximum engagement of screw- #118-420-079AV Low 1" Silver 8A31H99 $ 31.99 precision-matched pair. ab include 1 pair concentric inner rings (inserts). Pos- Align Standard (STD) driver blade to help prevent slippage and slot damage—you can #118-420-080AV .135" 1" Black 8A27H99 $ 27.99 SPECS: 34mm available in 1" (25.4mm), 1.25" (2.9cm) and 1.275" (31.9cm) Rings fit Burris/Leupold/Millett rotary dovetail systems. Pos-Align Zee even use a U.S. quarter in a pinch. Crossbolt has a square shank that #118-420-083AV Low 1" Safari 8A27J99 $ 27.99 ring heights. 1" & 1.125" – Steel, matte black oxide finish. 1.275" - MAX- Rings (ZEE) fit Weaver-style bases. Height shown is from top of base serves as a recoil lug to solidly engage scope base when properly in- 8A31L99 Alloy aluminum, black, matte, anodized finish. Ring heights measured #118-420-085AV Med. 1" Silver $ 31.99 to bottom of ring. 1" Standard Rings: Med - .270" (6.8mm); High - .390" stalled to ensure rings won’t shift forward under recoil. Four, strong 8A27J99 from top of base to inside center of rings. 35mm - Machined aluminum, 1 ® #118-420-081AV Med. 1" Pol. Blue $ 27.99 (9.9mm). 1" Zee Rings: Med. - .270" (6.9mm); High - .420" (10.7mm). 30mm 6-40 x /4" T-15 Torx head screws securely anchor the ring halves, hardcoat anodized, matte black. Heights listed below. Standard Rings - Med. - .180" (4.6mm); High - .300" (7.6mm); Extra High and large contact area with scope helps prevent slippage even on #118-420-084AV Med. 1" Safari 8A27I99 $ 27.99 #093-000-028AV 34mm Rings, 1" High, 3K00JND​ �������������$ 189.99 - .420" (10.7mm). Inserts - Synthetic material, black. 30mm Zee Rings - heavy-recoiling, magnum rifles. Available in 4140 billet steel for su- #118-420-082AV High 1" Pol. Blue 8A27N99 $ 27.99 #093-000-035AV 34mm Rings, 1.125" High, 3K185M24​ ����� 189.99 Med. - .200" (5.1mm); High - .325" (8.3mm); Extra High - .580" (14.7mm) perb strength and stability, or aluminum models machined from #118-420-077AV High 30mm Matte 8A46J99 $ 46.99 #093-000-017AV 34mm Rings, 1.275" High, 3K190F99​ ����� 199.99 6061 T6 billet for reduced weight. Matte black finish blends with STOCK # MODEL FINISH PRICE most factory rifle and scope finishes. Replacement nut, crossbolt, #093-000-043AV 35mm Rings, 1.125" High, 3K00MBI​ ������� 189.99 #118-420-401AV 1" Med. Matte 8A34C99 $ 34.99 and aluminum or steel side locking bars available separately. ab #093-000-044AV 35mm Rings, 1.375" High, 3K00JBS​ ������� 189.99 #118-420-578AV 30mm Med. Matte 8A59I99 $ 59.99 SPECS: Rings sold in pairs. Models available to fit 1" and 30mm scope bod- #118-420-411AV 1" High Matte 8A34B99 $ 34.99 ies. Steel - 4140 billet steel, black, matte, oxide finish. Aluminum - 6061 BURRIS QUICK DETACH ZEE RINGS #118-420-581AV 30mm STD MB 8A59Q99 $ 59.99 T6 aluminum billet, hardcoat anodized black, matte. Heights measured from top of base to center of ring: Low - .825" (2.1cm); Med. - 1" (2.5cm); Quickly Removable, Super Stable BADGER ORDNANCE #118-420-582AV 30mm Ex High Matte 8A59E99 $ 59.99 High - 1.125" (2.9cm); Extra-High - 1.375" (3.5cm). #118-420-420AV 1" Medium Black 8A39B99 $ 39.99 Nothing is more frustrating than #080-000-436AV Low 1" Picatinny Rings, Steel, ​ breaking a scope on the hunt with MAXIMIZED SCOPE RINGS #118-420-421AV 1" Med. Matte 8A39J99 $ 39.99 8K81K09 ���������������������������������������������������� $ 89.99 no way to remove it from the rifle. #118-420-422AV 1" Med. Nickle 8A45C99 $ 45.99 Extra Strong To Withstand #080-000-437AV Med 1" Picatinny Rings, Steel, ​ Weaver-style, 1" quick detach rings 8A39K99 Heavy Recoil #118-420-430AV 1" High Black $ 39.99 8K81L06 ����������������������������������������������������� 89.99 give you a rock solid mounting sys- #118-420-431AV 1" High Matte 8A39H99 $ 39.99 #080-000-438AV High 1" Picatinny Rings, Steel, ​ tem for optics that can be removed Heavy duty 30mm steel #118-420-432AV 1" High Nickle 8A45L99 $ 45.99 8K81P08 ���������������������������������������������������� 89.99 from the base quickly and easily with QD levers. Instead of walking back to camp empty handed, you can simply remove the scope and rings, machined in pairs, serial #118-000-018AV 30mm Medium Matte 8A61J99 $ 61.99 #080-000-433AV Low 1" Picatinny Rings, Alum., ​ numbered, and designed spe- use the iron sights. Immediate return to zero means that you won’t 8A61L99 8K65E38 ���������������������������������������������������� 69.99 Ultra-High cifically to securely hold large, #118-000-017AV 30mm High Matte $ 61.99 spend precious daylight sighting back in if you’ve taken the scope Max-50 #080-000-434AV Med 1" Picatinny Rings, Alum., ​ heavy scopes on hard-recoiling #118-000-004AV 30mm Extra High Matte 8A61Q99 $ 61.99 off for dense woods hunting. Two, Torx head screws fasten rings 1 8K65C37 ���������������������������������������������������� 69.99 guns. Weaver-style clamp with big /2" nut really snugs ring to the securely to scope. Available in Low, Medium, and High. mount. Ultra-High provides optimum height for AR-15, AR-10 and SIGNATURE OFFSET RING INSERTS - Pos- #080-000-435AV High 1" Picatinny Rings, Alum., ​ SPECS: Hardened steel. Matte black. Height from top of base to bottom of SR-25 rifles. MAX-50 is 1" (2.5cm) wide with six clamping screws. Align®, synthetic inserts optically center the in- 8K65P37 ���������������������������������������������������� 69.99 ring. Low .2" (5.1mm). Medium .32" (8.1mm). High .48" (12.2mm). Sold per set. Gives 60% more holding power to keep scopes on .50 BMG rifles. ternal lenses of your scope for optimal bright- #080-000-811AV Med. 30mm Picatinny Rings, Steel, ​ #118-000-005AV Quick Detach Zee Ring, Low, ​ Ring reducers convert 30mm to 1". ab ness and clarity. Offset design helps correct 8K92F94 ���������������������������������������������������� 99.99 8A52F99 �������������������������������������������������$ 52.99 SPECS: Steel, black,matte finish. Ring height measured from top of mount for slightly misaligned rings caused by off-center receiver holes, #080-000-740AV High 30mm Picatinny Rings, Steel, ​ #118-000-006AV Quick Detach Zee Ring, Med, ​ to center of ring; Standard - .823" (2cm), Medium - .885" (22.5mm), Medi- bases, or rings. Relieves stress on the scope tube and allows maxi- 8K92B94 ���������������������������������������������������� 99.99 8A52B99 ������������������������������������������������� 52.99 um High - 1.0" (2.5cm), High - 1.125" (2.8cm), Ultra High - 1.378" (3.5cm). mum usage of your scope’s internal windage/elevation adjust- #080-000-741AV Ex-High 30mm Picatinny Rings, Steel, ​ #118-000-007AV Quick Detach Zee Ring, High, ​ 29 Max-50 - .823" (2cm), Max-50 High - 1.125". Max-50 Ultra-High - 1 /64" ments. Delivers excellent scope-to-ring contact without lapping; 8K92C47 ���������������������������������������������������� 99.99 8A52F99 ������������������������������������������������� 52.99 (3.7cm). Weights; Standard - 6.6 oz (187 g), High - 9 oz. (255 g), Ultra plus, prevents dings and marks on the scope tube. Available in pairs #080-000-810AV Med. 30mm Picatinny Rings, Alum., ​ High - 10 oz. (284 g), Max-50 - 10.4 oz, (294 g). or kits. Basic Kit includes one pair each of +/- .005", +/- .010" and 8K90B30 ���������������������������������������������������� 99.99 #093-306-080AV Std .823" Scope Ring, 3K00JTD​ ������������� $ 169.99 +/- .020" inserts; Gunsmith Kit includes 10 pairs of each. ab SPECS: Synthetic, black. For 1" rings only. #080-000-738AV High 30mm Picatinny Rings, Alum., ​ #093-306-001AV Med .885" Scope Ring, 3K00PJG​ ����������� 169.99 #118-626-019AV Pos-Align Offset Insert Kit for 1" 8K90F30 ���������������������������������������������������� 99.99 #093-306-002AV Med High 1" Scope Ring, 3K00QQB​ ����� 169.99 BURRIS Rings, 8A00PTI​ ������������������������������������ $ 16.49 #080-000-739AV Ex-High 30mm Picatinny Rings, Alum., ​ DELUXE .22 TIP-OFF RINGS #093-306-090AV High 1.125" Scope Ring, 3K00DJL​ ��������� 169.99 Pos-Align #118-626-024AV G’smith Offset Insert Kit, 8A84E99​ 84.99 8K90H30 ���������������������������������������������������� 99.99 All Steel For Full Size Rimfire #093-306-100AV Ultra High 1.378" Scope Ring, ​ #118-626-017AV +/-.010" Offset Inserts, 1 pair, ​ #080-000-708AV Replacement Hex Nut, 8K6Q94​ ���������� 7.99 & Airgun Scopes Deluxe 3K00ELM ������������������������������������������������������� 169.99 8A00ALE ������������������������������������������������ 9.99 #080-000-709AV Replacement Crossbolt, 8K5Q33​ �������� 5.99 #093-306-110AV Max-50 Scope Rings, 3K170M99​ ����������� 179.99 Gracefully contoured, #118-626-018AV +/-.020" Offset Inserts, 1 pair, ​ #080-000-706AV Replacement Locking Bar, Steel, ​ #093-000-001AV Max-50 High Scope Rings, 3K170F99​ ��� 179.99 8K6E27 �������������������������������������������������������� 6.99 precision-machined, premium 8A00QJB ������������������������������������������������ 9.99 steel rings mount 1" scopes on #093-000-013AV Max-50 Ultra High Scope Rings, ​ #080-000-707AV Replacement Locking Bar, Alum., ​ airguns or .22 caliber rimfires 3K168K99 ����������������������������������������������������� 179.99 8K5N35 ������������������������������������������������������ 5.99 with grooved receivers. Blued #093-306-120AV 1" Std Ring Reducers, 3K29I99​ ��������������� 30.99 3 finish. Fits nominal /8" dovetail. #093-000-002AV 1" Max-50 Ring Reducers, 3K43C99​ ����� 45.99 DELUXE RINGS - Graceful style and superior strength. Highly pol- EGW ished blued finish. SPECS: Height measured from top of base to bottom of scope tube. PRACTICAL ALUMINUM RINGS Medium - .310" (7.9mm) high. High - .455" (11.6mm) high. #118-420-072AV Med. .22 Rings, 8A34J99​ �������������������$ 34.99 SHOOT LIKE A PRO Low Profile & High Strength locks in the rail slot or base to prevent slippage under recoil. Avail- able for 1" and 30mm diameter scope tubes. ab #118-420-073AV High .22 Rings, 8A34M99​ ������������������� 34.99

Vertically split, low-profile rings SPECS: Aluminum, hardcoat anodized, matte black. Steel crossbar. Sold RIFLE clamp to MIL-STD 1913 Picatinny rails in pairs. Height measured from top of base to center of ring. 1" – .750" SIGNATURE POS-ALIGN RIMFIRE/AIRGUN RINGS - 1" rings with or Weaver-style bases and provide high. 30mm – .840" high. self-aligning, synthetic inserts that prevent scope damage from misaligned rings. an eye-pleasing, streamlined look #296-000-161AV 1" Practical Rings, 6B52J00​ ������������������ $ 54.00 without compromising strength. Ring SPECS: Steel, matte blued finish. High .793" (20.1mm). Fits both nominal WE CARRY SUPERIOR PRODUCTS #296-000-160AV 30mm Practical Rings, 6B52K00​ �������� 54.00 3 halves clamp together with four, steel /8", .22 and 11mm airgun dovetails. FOR SUPERIOR PERFORMANCE Allen head screws for a tight hold on optic and rail. Steel cross-bar — Advise # — Two-Piece Base Set, 4K29K45 ��������������� $ 34.99 #118-420-556AV MB RF/Airgun Rings, 8A54M99​ �������� $ 54.99

order on the web

Orders: 800-741-0015 brownells.com PAGE 263 LEUPOLD Items LEUPOLD LEUPOLD EGW TACTICAL SCOPE RINGS BACKCOUNTRY CROSS-SLOT BACKCOUNTRY RING+BASE TWO-PIECE RIFLE BASE SETS Machined As A Matched, Serial-Numbered Pair For RINGS & BASES COMBINATION MOUNTS Two-piece base sets, CNC ma- Precise Alignment chined to exacting tolerances, provide Lightest Weight, Robust, Easy-To-Install rock solid scope mounting. Reversible Heavy duty Picatinny rings are Most Compact Scope Scope Mounting System With and long rear bases make it easy to use precision machined from solid alumi- Mounting System standard rings to mount scopes, from num billet as matched pairs to aid in Plenty of Versatility extra long varmint and target models to small compacts on any Leupold's minimalist mounts obtaining the best possible alignment. Each pair is clamped together length action. Front bases accept Leupold’s (and Burris/Redfield/ and the center holes bored to 30mm to tolerances of +/-.0014", then BackCountry cross-slot bases and are designed specifically for folks Millett) rotary dovetail ring. The rear base uses standard Leupold/ who are traveling deep into the engraved with matching serial number. In addition, the lower halves matching rings give you excellent versa- Burris/Redfield windage, screw-secured ring. ab are marked to prevent separation from their matched ring caps. All tility in eye relief and ring spacing, with- back country - but still need SPECS: 12L14 Cold Rolled Steel. Polished blue (Gloss), Matte blue (Matte),

RINGS & BASES edges are beveled or radiused, including both sides of the steel ring out suffering a weight penalty. Like Le- a scope on their rifles. When or Satin nickel (Silver) finish. Includes 2 bases with TORX screws. (RF) you're on a long trek on foot, every extra ounce can feel like a ton nut, to minimize potential for snagging on other gear. Surfaces are upold's BackCountry combo ring/bases, Reversible front base. (RR) Reversible rear base. blasted to ensure an even, matte finish, then hard anodized with a these separates are machined from 7075 T6 aluminum for a superb of extra weight. OK, maybe we exaggerate a bit, but BackCountry mounts are scope rings with the bases built right in. All you need durable black finish for added strength and wear resistance. Crossbolt combination of strength and light weight. Slots are cut to Picatinny RIFLE MODEL STK# GLOSS STK# MATTE STK# SILVER and nut are machined from chrome-moly steel, heat treated for ex- specs and will also accept Weaver rings, if you have some old yet is a pair of these mounts to securely anchor your scope to your Austin & Halleck #526-500-320AV NA NA ceptional strength, and blued. Steel, Torx® screws, four per ring, have still serviceable rings on hand. BackCountry bases are available with bush rifle, and you're ready to hit the trail - without sacrificing per- formance for weight reduction. These are still Leupold mounts, so Browning FN action #526-370-070AV #526-462-900AV NA matching finish. Separately available, precision-machined polymer both zero elevation or with 20 MOA of built-in elevation for use on inserts allow use of these rings with 1" diameter scope tubes. ab long-range rifles or with scopes that have limited internal elevation they provide rock solid attachment for your scope. Machined from FN action RF #526-370-080AV NA NA exceptionally strong and lightweight 7075 T6 aluminum billet, with A-Bolt long rear base #526-417-770AV #526-462-970AV #526-451-570AV SPECS: Rings – Body: Aluminum, hardcoat anodized, matte black. Cross- adjustment. The rings are engineered to make maximum contact bolts/Nuts/Cap Screws – Chrome-moly steel, blued. Height from top of with the base for excellent stability without resorting to excess metal a tough matte black hard-anodized finish. AND they're easy to in- A-Bolt Std. rear base #526-492-250AV NA NA stall on your factory drilled-and-tapped receiver using the included base to inside bottom of ring: .400" (10.1mm). Fits scopes with 30mm that will add bulk and weigh down your rifle. And when you're ready A-Bolt WSSM NA #526-000-076AV NA O.D. tubes. Mounts to MIL-STD 1913 Picatinny bases. Inserts – Machined to change scopes.... leave the base on your rifle and simply acquire mounting screws. When ounces matter as much as performance, X-Bolt #526-000-103AV #526-000-102AV #526-000-104AV polymer, black. the correct BackCountry rings for your new optic. Rings sold in you need a set of BackCountry mounts. ab #296-000-109AV 30mm Tactical Scope Rings, 1 Pair, ​ pairs. Bases come with mounting screws and are drilled to fit fac- BLR Lightning #526-502-370AV #526-502-380AV NA 6B108Q00 ������������������������������������������������$ 112.50 tory drilled-and-tapped receiver holes. ab STOCK # FITS HEIGHT SIZE PRICE BR 1885 Hi-Wall (Will #526-492-220AV NA NA #100-028-683AV Browning AB3 Medium 1" 4K00BNS $ 85.99 not fit BPCR, Traditional) #296-000-110AV Inserts For 1" Scopes, 1 Pair, #100-028-737AV 1" Med. BackCountry Rings, ​ 6B13I00​ ����������������������������������������������������� 13.50 4K00QBL �����������������������������������������������������$ 85.99 #100-028-684AV Browning AB3 High 1" 4K00KSE $ 85.99 BSA Monarch #526-370-030AV #526-476-640AV NA #100-028-738AV 1" High BackCountry Rings, ​ #100-028-685AV Browning AB3 Medium 30mm 4K00PFC $ 72.99 BR 1885 Low-Wall (Will #526-512-600AV NA NA 4K00JUQ ���������������������������������������������������� 76.99 #100-028-686AV Browning AB3 High 30mm 4K00CZE $ 72.99 not fit BPCR, Traditional) #100-028-739AV 30mm Low BackCountry Rings, ​ #100-028-691AV Browning X-Bolt Medium 1" 4K00DXJ $ 85.99 Monarch RF #526-370-040AV NA #526-463-010AV 4K00NLL ����������������������������������������������������� 85.99 #100-028-692AV Browning X-Bolt High 1" 4K00IBP $ 85.99 AB3 RVF NA #526-000-303AV NA FARRELL INDUSTRIES #100-028-740AV 30mm Med. BackCountry Rings, ​ #100-028-693AV Browning X-Bolt Medium 30mm 4K00PSE $ 72.99 Harrington & Richard- #526-370-070AV #526-462-900AV NA PICATINNY SCOPE RINGS 4K00FHD ����������������������������������������������������� 85.99 #100-028-694AV Browning X-Bolt High 30mm 4K00FPN $ 72.99 son 300, 301, 330, 370 #100-028-741AV 30mm High BackCountry Rings, ​ #100-028-671AV Remington 700 Medium 1" 4K00MZE $ 85.99 (FN Mauser) Unique Clamping System Ensures The 4K00LJB ����������������������������������������������������� 73.99 Maximum Amount of Torque #100-028-672AV Remington 700 High 1" 4K00CIK $ 85.99 H&R (FN Mauser) RF #526-370-080AV NA NA #100-028-742AV 34mm Med. BackCountry Rings, ​ #100-028-673AV Remington 700 Medium 30mm 4K00FRN $ 85.99 4K00PWP ��������������������������������������������������� 73.99 JC Higgins Model 51 #526-370-070AV #526-462-900AV NA 100% machined, solid steel, scope rings use an #100-028-674AV Remington 700 High 30mm 4K00EAG $ 85.99 innovative, built-in, radius clamp that gives out- #100-028-743AV 35mm High BackCountry Rings, ​ Model 51 RF #526-370-080AV NA NA #100-028-675AV Savage 10/110 Rnd Rec’r Medium 1" 4K00BYB $ 85.99 Kimber 84 NA #526-000-108AV NA standing torque and a solid fit. When you tighten the 4K00KLG ����������������������������������������������������� 87.99 large Torx screw, a convex extension on the moveable jaw is forced #100-028-676AV Savage 10/110 Rnd Rec’r High 1" 4K00FYH $ 85.99 8400 NA #526-000-109AV NA into a matching, concave recess on the ring for exceptional clamping STOCK # FITS TYPE PRICE #100-028-677AV Savage 10/110 Rnd Rec’r Medium 30mm 4K00LEQ $ 85.99 Knight Disk, Wolverine #526-000-029AV NA NA power. Rings in each set are simultaneously machined and uniquely #100-028-715AV Browning A-Bolt SA 0 MOA 4K38Q62 $ 41.99 #100-028-678AV Savage 10/110 Rnd Rec’r High 30mm 4K00HJD $ 85.99 Marlin 455 #526-370-070AV #526-462-900AV NA numbered for ultimate consistency between the pair. Skeletonized #100-028-716AV Browning A-Bolt SA 20 MOA 4K00QZS $ 32.99 #100-028-679AV Tikka T3/T3x Hunter Medium 1" 4K00GYK $ 77.99 455 RF #526-370-080AV NA NA caps reduce weight, not overall strength. Fits Picatinny rails. ab SPECS: Steel barstock, blued, matte finish. Height measured from top of #100-028-717AV Browning A-Bolt LA 0 MOA 4K34D78 $ 40.99 #100-028-680AV Tikka T3/T3x Hunter High 1" 4K00DKB $ 72.99 Model 7 #526-370-050AV #526-462-800AV NA base to inside bottom of ring. 1" (25.4mm) Standard - .335" (8.5mm); 1" #100-028-718AV Browning A-Bolt LA 20 MOA 4K34A78 $ 40.99 4K00CMI #100-028-681AV Tikka T3/T3x Hunter Medium 30mm $ 80.99 Model 7 RF/RR #526-370-060AV NA NA High - .535" (13.6mm); 30mm (1.18") Standard - .243" (6.2mm); 30mm #100-028-719AV Browning AB3 SA 0 MOA 4K00KBR $ 37.99 #100-028-682AV Tikka T3/T3x Hunter High 30mm 4K00DGS $ 76.99 Mauser FN, Mark X, #526-370-070AV #526-462-900AV NA High - .443" (11.3mm). #100-028-720AV Browning AB3 SA 20 MOA 4K00MBP $ 29.99 #100-028-695AV Weatherby Mk V Medium 1" 4K00QQH $ 76.99 Parker Hale #100-000-893AV 1" Standard Rings, 8K148K46​ �������������� $ 157.99 #100-028-721AV Browning AB3 LA 0 MOA 4K00KGG $ 41.99 100-028-696AV Weatherby Mk V High 1" 4K00GKR $ 77.99 Mauser RF #526-370-080AV NA NA #100-000-894AV 1" High Rings, 8K00FYL​ ������������������������� 147.99 #100-028-722AV Browning AB3 LA 20 MOA 4K00GJE $ 37.99 100-028-697AV Weatherby Mk V Medium 30mm 4K00GTC $ 76.99 Swedish M-96 NA #526-512-630AV NA #100-000-895AV 30mm Standard Rings, 8K00ECI​ ������� 166.99 #100-028-699AV Remington 700 SA 0 MOA 4K00DYJ $ 40.99 Mauser ’98 NA #526-000-075AV NA #100-000-896AV 30mm High Rings, 8K00CTA​ ��������������� 163.99 #100-028-700AV Remington 700 SA 20 MOA 4K00BFD $ 41.99 Remington Model 7 #526-512-560AV NA NA #100-028-701AV Remington 700 LA 0 MOA 4K34A78 $ 40.99 700, 721, 725, 40-X, #526-370-030AV #526-476-640AV NA #100-028-702AV Remington 700 LA 20 MOA 4K00BWH $ 40.99 700BP #100-028-733AV Ruger American SA 0 MOA 4K36J90 $ 43.99 700 RF #526-370-040AV #526-000-030AV #526-463-010AV RIFLE MODEL STK# GLOSS STK# MATTE STK# SILVER #100-028-734AV Ruger American SA 20 MOA 4K31H47 $ 37.99 STOCK # FITS TYPE PRICE 710 NA #526-541-000AV NA Vanguard #526-370-030AV #526-476-640AV NA #100-028-735AV Ruger American LA 0 MOA 4K00MTR $ 37.99 #100-028-727AV Weatherby Mark V/ 0 MOA 4K00HBB $ 40.99 541 #526-000-029AV NA NA Vanguard RF #526-370-040AV NA #526-463-010AV #100-028-736AV Ruger American LA 20 MOA 4K00KNG $ 35.99 Vaguard LA Ruger M-77 round #526-370-030AV #526-476-640AV NA Mk V #526-517-000AV #526-517-010AV NA #100-028-703AV Savage 10 Rnd Rec’r SA 0 MOA 4K00MLR $ 43.99 #100-028-728AV Weatherby Mark V/ 20 MOA 4K00PWI $ 35.99 action Mk V RF NA #526-517-030AV NA #100-028-704AV Savage 10 Rnd Rec’r SA 20 MOA 4K00MJP $ 42.99 Vaguard LA Model 77 RF #526-370-040AV NA #526-463-010AV Winchester 70 RR #526-370-050AV #526-462-800AV NA 4K00AQI #100-028-705AV Savage 110/AXIS Rnd 0 MOA 4K00MHE $ 41.99 #100-028-729AV Weatherby Vanguard SA 0 MOA $ 41.99 Sako round action #526-370-070AV #526-462-900AV NA Win. 70 RF / RR Post ’64 #526-370-060AV #526-000-031AV NA Rec’r SA #100-028-730AV Weatherby Vanguard SA 20 MOA 4K30E91 $ 38.99 Sako RF #526-370-080AV NA NA Model 70, 70A, 670, 770 #100-028-706AV Savage 110/AXIS Rnd 20 MOA 4K00FDJ $ 42.99 #100-028-707AV Winchester 70 SA 0 MOA 4K36E90 $ 43.99 Savage 10//110, 16//116 #526-000-072AV #526-000-073AV #526-000-074AV and Pre-’64 Model 70 Rec’r SA #100-028-708AV Winchester 70 SA 20 MOA 4K36Q90 $ 43.99 w/Accu-Trigger; also Serial# above 66, 360— #100-028-731AV SIG Sauer 202 SA 20 MOA 4K00BMN $ 37.99 #100-028-709AV Winchester 70 LA 0 MOA 4K00FTQ $ 40.99 fits Edge except 70 Express, H&H #100-028-732AV SIG Sauer 202 LA 20 MOA 4K00JWH $ 37.99 #100-028-710AV Winchester 70 LA 20 MOA 4K00GXK $ 40.99 S&W 1500 #526-370-030AV #526-476-640AV NA magnum actions #100-028-723AV Tikka T3/T3x 0 MOA 4K00LRQ $ 41.99 #100-028-711AV Winchester XPR SA 0 MOA 4K00NJF $ 41.99 1500 RF #526-370-040AV NA #526-463-010AV 94 Angle Eject #526-000-032AV NA NA #100-028-724AV Tikka T3/T3x 20 MOA 4K00JEF $ 35.99 #100-028-712AV Winchester XPR SA 20 MOA 4K00KHR $ 37.99 RIFLE Tikka Whitetail Hunter #526-000-056AV NA NA Ruger American™ NA #526-000-302AV NA #100-028-725AV Weatherby Mark V LT 0 MOA 4K00AIE $ 37.99 #100-028-713AV Winchester XPR LA 0 MOA 4K00LHN $ 37.99 Weatherby FN action #526-370-070AV #526-462-900AV NA Round Rcrv #100-028-726AV Weatherby Mark V LT 20 MOA 4K00BYJ $ 28.99 #100-028-714AV Winchester XPR LA 20 MOA 4K00GEP $ 37.99 FN action RF #526-370-080AV NA NA — Advise # — Two-Piece Base Set, 4K29K45 �������������������$ 34.99

GUARANTEED. FOREVER.®

PAGE 264 SINCE 1939 Office/Tech: 641-623-5401 LEUPOLD ONE-PIECE BASE KELBLY “PANDA” SCOPE RINGS LEUPOLD Item LEUPOLD QUICK-RELEASE™ Exact Dimensions & Variety Of Height Carefully machined from QRW2 RING & BASE SYSTEM MOUNT SYSTEM cold-rolled, steel bar stock, Options For Benchrest Shooters featuring generous windage Kelbly rings the number one choice All-Steel, Weaver-Style Remove Scope In Seconds; RINGS & BASES adjustments for rear ring and of many benchrest shooters. High-qual- Components With Quick Release Positive Return To Zero precision fitted rotary dovetail ity rings are machined from solid bars of Levers; Start Fresh Or Retrofit To Remove the scope with just for front ring. Note: “STD” Mount Bases accept Burris, Millett and aluminum as matched sets to exacting Existing Bases a twist of the levers and reinstall Redfield rotary dovetail rings. ab tolerances. Designed to mount on Stolle Standard 30mm Double it in only seconds with no loss of SPECS: 12L14 cold rolled steel. Polished Blue (PB), Matte blue (MB), Satin Dovetails or Davidson bases. Available in Screw Rings The latest generation of QRW zero. Double-lever, dual locking nickel (SIL) finish. Long Range (LR) gives additional elevation. All include single screw or double screw models. Bead blasted or matte black rings gives you the strength of cross- cam system withstands the recoil from any rifle cartridge without TORX mounting screws. anodized finish. All rings are sold as pairs. Standard height rings also slot mounting combined with Leupold shooting loose or accidentally unlocking. ab work well with large objective scopes such as Nightforce and Burris quality, plus the added convenience of quick release levers. With the SPECS: Steel. Polished blue (PB) or matte blue (MB) finish. 1-piece bases on varmint and hunting rifles. Standard height is available in 1" and rings split at an angle, below the centerline, it’s easy to tighten the RIFLE MODEL ACTION FINISH STOCK # fit right-hand actions only. 2-piece bases sold per pair to fit RH, and LH 30mm, double or single screw, stainless steel with a bead-blasted Torx head cap screws evenly without causing the scope to “roll” in BROWNING actions. Rings, sold in pairs, 1" (2.5cm) or 30mm (1.18") dia. Ring heights silver (SS) or matte black (BLK) finish. ab the rings. Spring-loaded, adjustable levers can be moved so both FN action Long PB #526-261-620AV rest at the same angle after tightening. QRW2 rings are an upgrade measured from top of base to center of ring. Low; .650" (16.5mm). Me- A-Bolt Short MB #526-000-034AV STOCK # DESCRIPTION DIAMETER HEIGHT PRICE on this tried-and-true design, with an easy-installation ring-top, an dium; .770" (19.5mm). High .900" (22.8mm), Super High; 1.0" (2.5cm). 5 Long MB #526-000-035AV #749-007-524AV 1" Std Double 1" Standard (1.0835") D/S 1.0835" 8E00ENE $ 80.99 improved keeper, and a bigger contact area with the base for a preci- Extension Rings include one standard ring and one that is extended /8" to allow mounting a wide variety of scopes. BAR semi auto PB #526-261-630AV Screw, SS Bead Blasted Rings sion fit. They maintain the classic QRW ruggedness and appearance. 8E00JRN Matching QRW 2-Piece Bases sold separately, below. ab BLR lever action pre-’96 PB #526-261-640AV #749-007-523AV 30mm Std Single 30mm Standard (1.1344") 1.1344" $ 80.99 QUICK-RELEASE TWO-PIECE BASES - BLUE Screw, SS S/S Bead Blasted Rings SPECS: Steel, powder-coated finish. Available in Gloss Black, Matte Black, BSA and Silver. Rings and bases sold in pairs. Ring heights measured from top 8E00IPK STK# PB STK# MB FITS Monarch right hand Short PB #526-261-670AV #749-007-658AV 30mm Std Single 30mm Standard (1.1344") 1.1344" $ 92.99 of base to center of ring: 1" Low - .750" (19.1mm); 1" Medium - .880" Screw, BLK S/S Black Rings #526-471-840AV #526-471-850AV BSA Monarch, Rem. 40X, Long PB #526-261-660AV (22.4mm); ; 1" High - 1.000" (25.4mm); 30mm Low - .840" (21.3mm); #749-007-639AV 30mm Std Double 30mm Standard (1.1344") 1.1344" 8E00HZS $ 111.99 30mm Medium - .970"; (24.6mm); 30mm High - 1.090" (27.7mm). 700,721, 722, 725, S&W 1500, HARRINGTON & RICHARDSON Screw, SS D/S Bead Blasted Rings Weatherby Mk V, Vanguard Long PB #526-261-620AV QRW RINGS #749-007-827AV 30mm Std Double 30mm Standard (1.1344") 1.1344" 8E00EKK $ 123.99 #526-500-550AV #526-500-560AV Mark X (Mauser) HOWA Screw, BLK D/S Black Rings STOCK # SIZE HEIGHT FINISH STYLE PRICE #526-500-650AV NA Gunmaker’s Bases, bottom 1500 Long PB #526-261-660AV Kelbly ring heights are measured from the top of the base to the center of the ring. #100-028-648AV 1" Low Gloss Black 1" 4K60E68 $ 70.99 not contoured HUSQVARNA #100-028-649AV 1" Low Matte Black 1" 4K00HYF $ 68.99 NA #526-471-890AV Win. 70 Crown Grade & Carl Gustaf PB #526-261-720AV #100-028-650AV 1" Low Silver 1" 4K00GAI $ 69.99 NA #526-500-620AV Win. 70 Express, Pre ’64 JC HIGGINS LEUPOLD RIMFIRE RINGS #100-028-651AV 1" Med. Gloss Black 1" 4K60A68 $ 70.99 w/.435" rear hole spacing Model 51 PB #526-261-720AV 3 No-Drill, No-Tap Design For /8" & 13mm Dovetails #100-028-652AV 1" Med. Matte Black 1" 4K00JLB $ 68.99 NA #526-500-630AV Win. 70 Express, Post ’64 Model 53 Long PB #526-261-620AV All-steel rings mount 1" scopes on rimfire rifles and #100-028-653AV 1" Med. Silver 1" 4K60P08 $ 70.99 w/.330" rear hole spacing MARLIN 3 ® handguns with integral /8" or 13mm receiver dovetails. Torx #100-028-654AV 1" High Gloss Black 1" 4K60N68 $ 63.99 NA 100-028-644AV Winchester XPR 36 / 336 PB #526-261-650AV screw mounting system guarantees these rings stay put! ab #100-028-655AV 1" High Matte Black 1" 4K63J37 $ 68.99 — Advise # — Q-R 2-Pc Bases, PB or MB, 4K00ISA ���������$ 49.99 SPECS: Steel, high-polish blue. Torx head wrench included. Height mea- Model 455 Long PB #526-261-620AV #100-028-656AV 1" High Silver 1" 4K60C08 $ 62.99 sured from top of base to center of ring. QUICK-RELEASE ONE-PIECE BASES - BLUE Model 7 Long PB #526-261-700AV #100-028-657AV 30mm Low Gloss Black 30mm 4K69K35 $ 81.99 STOCK # FITS DOVETAIL HEIGHT STK# MB FITS MAUSER #100-028-658AV 30mm Low Matte Black 30mm 4K67A79 $ 79.99 3 #526-000-049AV /8" Med. - .875" (22.2mm) #526-000-055AV Marlin 336/1895 FN & Mk X, Parker Hale PB #526-261-620AV #100-028-659AV 30mm Med. Gloss Black 30mm 4K68H67 $ 75.99 3 #526-000-050AV /8" High - 1" (25.4mm) #526-512-470AV Rem. 7, 700 Unaltered Large Ring 98 PB #526-261-730AV #100-028-660AV 30mm Med. Matte Black 30mm 4K68F46 $ 80.99 #526-000-005AV Thompson Center Encore MOSSBERG — Advise # — 1" Rimfire Scope Rings, 4K53C95 ������������ $ 65.99 #100-028-661AV 30mm High Gloss Black 30mm 4K69H35 $ 81.99 1500 / 1700 Long PB #526-261-660AV #100-028-662AV 30mm High Matte Black 30mm 4K00EBC $ 79.99 — Advise # — Q-R 1-Piece Base, 4K51K50 ����������������������� $ 60.99 Model 1500 / 1700 Short PB #526-261-670AV REMINGTON RIFLE MODEL ACTION FINISH STOCK # QRW BASES QUICK-RELEASE RINGS - MATTE BLUE Model 4, 6, 7400, 7600 PB #526-349-200AV 10 thru 16, right hand w/AccuTrigger Short PB #526-000-068AV STOCK # FITS FINISH STOCK # DIA./HEIGHT MB #526-000-001AV Short MB #526-000-069AV #100-028-646AV Browning AB3 Matte Black #526-471-796AV 1"/Low 700, 721, 725, 40-X right hand Long PB #526-261-660AV Short SIL #526-000-070AV #749-004-796AV Rem 700/40X Gloss Black #526-471-810AV 1"/Medium Long MB #526-000-036AV PB #526-261-690AV #526-498-410AV Rem 700/721/722/725, 40X, SA & LA, Matte Black #526-499-760AV 1"/Medium Extended 700 left hand Long PB #526-263-160AV S&W RH & LH #526-471-816AV 1"/High 700 matte LR long range Long MB #526-517-320AV 1500 early model PB #526-261-720AV #749-004-794AV Savage 110-116 Gloss Black #526-517-150AV 1"/Super High 700 silver LR long range Long SIL #526-517-330AV 1500 right hand Long PB #526-261-660AV #100-028-647AV Tikka T3/T3x Matte Black #526-499-310AV 30mm/Medium 7, 700, 721, 725, 40-X right hand Short PB #526-261-670AV SPRINGFIELD #526-498-380AV Win 70, SA & LA (does not fit Express Matte Black #526-499-330AV 30mm/High 700 matte Short MB #526-500-060AV ’03-A3 PB #526-261-750AV model) #526-517-160AV 30mm/Super High 700 silver Short SIL #526-501-610AV #526-498-360AV Win 70 Express, Pre-’64 w/.435" rear hole Matte Black THOMPSON CENTER — Advise # — 1" Q-R Rings, 4K26A00 ������������������������������ $ 30.99 700 matte LR long range Short MB #526-517-340AV #526-498-350AV Win 70 Express, Post-’64 w/.330" rear hole Matte Black .22 Classic PB #526-000-063AV — Advise # — 30mm Q-R Rings, 4K38L03 ���������������������� 44.99 600, 660, XP-100 single shot Short PB #526-261-670AV WEATHERBY #100-028-645AV Winchester XPR Matte Black #526-499-760AV 1" Med. Q-R Ext Rings, 4K00QVB​ �������� $ 33.99 740, 742, 760 PB #526-261-680AV FN action PB #526-261-620AV — Advise # — QRW Bases, 4K30H92 �������������������������������� $ 36.99 RUGER Vanguard right hand Long PB #526-261-660AV 10/22 PB #526-322-620AV WESTERN FIELD MB #526-517-230AV Model 740 PB #526-261-650AV SIL #526-517-240AV WINCHESTER TALLEY RIMFIRE SCOPE RINGS M-77 round action Long PB #526-261-660AV Model 70 Long PB #526-261-700AV SPECS: Steel, blue, satin finish. Accept 1" scopes. Height from top of base Provide Precise Fit To Receiver to bottom of ring: Low - 313" (8mm). High - .600" (15.2mm). Sold in pairs. SAKO Long MB #526-000-037AV Round action PB #526-261-620AV Model 70 LR long range Long MB #526-517-360AV STOCK # FITS PRICE Machined from steel bar stock RIFLE SAVAGE Post ‘64 Mod. 70, 70A, 670, 770, and Pre Short MB #526-517-380AV to provide a strong mounting sys- #874-000-008AV Anschutz rings, Low 4G42H69 $ 52.99 110 thru 116 right hand Long PB #526-290-980AV ‘64 Win. Mod 70, Ser. # higher than 66,350 tem with a smooth profile. Precision #874-000-084AV Anschutz rings, High 4G43N69 $ 51.99 10 thru 16, Striker right hand Short PB #526-523-160AV —not including Express H&H magnums— cut dovetails have the correct angle #874-000-009AV CZ .22 Rimfire rings, Low 4G45K57 $ 54.99 for an exact fit. Torx® clamp screws 110 thru 116 left hand Long PB #526-502-190AV — Advise # — One-Piece Base, 4K00LYF �������������������������� $ 28.99 snug down tightly for maximum #874-000-109AV CZ .22 Rimfire rings, High 4G43I69 $ 51.99 110 thru 116, right hand w/AccuTrigger Long PB #526-000-065AV — Advise # — Long Range Base, 4K00EIE ������������������������ 30.99 holding power. ab #874-000-010AV CZ .22 Hornet rings, Low 4G65I95 $ 77.99

order on the web

Orders: 800-741-0015 brownells.com PAGE 265 LEUPOLD “STD” RINGS LEUPOLD DUAL DOVETAIL SCOPE LEUPOLD MARK 4 RINGS NIGHTFORCE Classic all-steel rings grip the scope tightly. Fits MOUNTS & RINGS Rock-Solid, Heavy-Duty Mounts For Extreme 30MM TACTICAL RINGS Leupold STD, one- and two-piece bases, plus bases Field & Tactical Use from Burris, Millett and Redfield. Models for 1" and Absolutely The Strongest Extra Strong For Police & Military Applications 30mm O.D. scope tubes. Extension Ring Sets contain Ring & Base System Heavy-duty rings are built to withstand ex- Milled from barstock, these rings provide the one standard ring, and one front extension ring that offsets ring Available treme service without movement or loss of zero. solid strength required for harsh field and tactical spacing .650" (16.5mm). ab Larger contact area between the scope/rings and use. With four TORX screws per cap, the scope is SPECS: Gloss - polished blue. Matte - matte blue. Silver - satin nickel. Leupold’s famous rotary base/receiver for less chance of movement. Large securely locked into the ring to prevent recoil movement. Large, 1⁄2" Height measurements listed in the table below are from top of base to dovetail rings in BOTH front hex nuts on rings allow fast torquing of cross bolts for easy ad- hex nut lets you torque ring securely to any MIL-STD 1913 Picatinny center of ring. AND rear bases; there’s no way ® justment. Non reflective, matte finish. Mounting screws and Torx base, and helps achieve a consistent return to zero. Steel cross lug a ring can shoot off its base. Ideal for large caliber, heavy kicking rifles head wrench included. Steel Rings - CNC machined from solid STOCK # HEIGHT SIZE FINISH STYLE that can throw a scope off easily, plus light caliber varmint rifles that provides additional strength, prevents shifting caused by recoil. ab 11L17 cold-rolled bar stock, then blued. Aluminum Rings - CNC 5 #526-261-590AV Low .650" 1" Gloss Standard need an absolutely rigid scope mount to make full use of the gun’s SPECS: Steel, parkerized, matte finish. 30mm I.D. /8" (15.9mm) wide. RINGS & BASES machined from 7075 T651 aluminum alloy and hardcoat anodized Height measured from top of base to bottom of scope body: Low - #526-261-600AV Medium .770" 1" Gloss Standard accuracy potential. Dual Dovetail Bases and Rings must be used for maximum strength and wear resistance. ab together; will not interchange with other Leupold rings and bases. .300" (7.6mm), High - .535" (13.6mm). Extra High - .782" (19.9mm). Fits #526-261-610AV High .900" 1" Gloss Standard SPECS: Steel or aluminum, matte black finish 1" (2.5cm) or 30mm (1.18") Picatinny bases. Rings and bases sold separately; select the correct base set for your inside diameter. Height from top of base to center of ring for both 1" and #526-463-970AV Super High 1.000" 1" Gloss Standard #524-000-001AV Low Tactical Rings, 2E165P00​ ������������ $ 170.00 rifle, then choose rings. ab 30mm: Med. - .84" (2.1cm); High - 1.06" (2.7cm); Super High - 1.4" (3.5cm). #526-408-270AV Super Low .550" 1" Matte Standard #524-000-003AV High Tactical Rings, 2E165H00​ ���������� 170.00 DUAL DOVETAIL RIFLE BASE SETS - Those marked “Rev. Frt.” have #526-000-085AV 1" Medium, Aluminum Rings, ​ #526-404-790AV Low .650" 1" Matte Standard reversible front base to help get correct ring spacing 4K00HFS ��������������������������������������������������� $ 154.99 #524-000-017AV Extra High Tactical Rings, #526-404-800AV Medium .770" 1" Matte Standard 2E165A00​ ������������������������������������������������ 170.00 SPECS: Steel. Finish: Standard Std. and PB, polished, blue; Matte, matte, #749-008-006AV 1" Medium, Steel Rings, 4K00CYM​ ����� 145.99 #526-461-340AV High .900" 1" Matte Standard blue; Silver, matte. #749-008-007AV 30mm Medium, Steel Rings, ​ #526-463-980AV Super High 1.000" 1" Matte Standard STOCK # MODEL/FINISH FITS 4K139J99 ������������������������������������������������� 139.99 #526-452-690AV Low .650" 1" Silver Standard #526-405-080AV 700 PB Rem. 700 Short & Long #526-502-220AV 1" Super High, Steel Rings, #526-453-380AV Medium .770" 1" Silver Standard #526-463-100AV 700 Matte 721/722/725/40X; Ruger 77 4K00BMN​ ������������������������������������������������� 141.99 REDFIELD SPLIT RINGS #526-470-680AV High .900" 1" Silver Standard #526-000-088AV 700 Silver (round receiver only); #526-000-086AV 1" Super High, Aluminum Rings, ​ 4K00NJF ��������������������������������������������������� 141.99 #526-499-080AV Low .650" 1" Gloss Extension #526-463-140AV 700 Rev. Frt/Matte BSA Monarch; S&W 1500 Proven Strength, Gracefully #526-000-082AV 30mm Medium, Aluminum Rings, ​ #526-499-100AV Low .650" 1" Matte Extension #526-405-050AV 70 PB Win. 70 Short & Long Scupltured For Great Looks 4K00KBK ��������������������������������������������������� 167.99 #526-294-250AV Medium .770" 1" Gloss Extension #526-463-170AV 70 Matte Win 70 Short & Long #526-499-110AV Medium .770" 1" Matte Extension #526-000-053AV 30mm High, Steel Rings, 4K123I37​ ����� 145.99 Beautiful, Streamlined Split #526-000-057AV 70 Rev. Frt/Matte Win 70 Short & Long Rings, precision-made of hardened #526-478-820AV High .900" 1" Gloss Extension #526-000-083AV 30mm High, Aluminum Rings, ​ #526-000-058AV 70 Rev. Frt/Matte Win 70 Express w/.330" rear 4K00CLP ��������������������������������������������������� 141.99 steel. Rotary dovetail engineering to .0004", guaranteed not to #526-478-830AV High .900" 1" Matte Extension hole spacing #526-520-830AV 30mm Super High, Steel Rings, ​ shoot loose on any rifle fired from the shoulder. #526-517-180AV Low .650" 30mm Matte Standard #526-501-590AV A-Bolt Rev. Frt/Matte Browning A-Bolt 4K00JEJ ��������������������������������������������������� 145.99 SPECS: Sold in pairs. Available in Polished Blue (PB) or Matte Blue (MB). #526-499-600AV Medium .770" 30mm Gloss Standard Heights measured from top of base to inside bottom of ring. #526-000-105AV X-Bolt/Matte Browning X-Bolt #526-000-084AV 30mm Super High, Aluminum Rings, ​ #526-455-840AV Medium .770" 30mm Matte Standard #526-000-106AV X-Bolt/PB Browning X-Bolt 4K00FZF ��������������������������������������������������� 141.99 STOCK # DIA./HEIGHT FINISH PRICE #526-510-340AV Medium .770" 30mm Matte Standard #526-517-050AV Mark V Std. Wthby Mark V #526-000-304AV 34mm High, Aluminum Rings , ​ #750-522-639AV 1" High .400" PB 5E25L13 $ 29.99 #526-524-940AV Medium .770" 30mm Silver Standard #526-517-060AV Mark V Matte Wthby Mark V 4K143F93 ��������������������������������������������������� 169.99 #750-522-708AV 1" Super-Hi .500" MB 5E30J22 $ 31.99 #526-470-050AV High .900" 30mm Gloss Standard #526-517-070AV Mark V Rev. Frt/Matte Wthby Mark V #526-000-305AV 35mm High, Aluminum Rings , ​ 4K00HWF ������������������������������������������������� 158.99 #526-499-590AV High .900" 30mm Matte Standard #526-000-059AV Encore/Matte/One-piece #526-510-350AV High .900" 30mm Matte Extension Thompson Center Encore #526-524-950AV High .900" 30mm Silver Standard #526-000-060AV Encore/Silver/One-piece #526-524-001AV Super High 1.000" 30mm Matte Standard Thompson Center Encore REDFIELD — Advise # — 1" Gloss & Matte Rings, 4K24N53 ��������� $ 28.99 100-028-642AV Winchester XPR RVR/Matte STEEL RUGER® RINGS — Advise # — 1" Silver Rings, 4K00HYH ������������������������� 34.99 — Advise # — Dual Dovetail Rifle Base, 4K19M96 �������� $ 25.99 ® — Advise # — 1" Extension Rings, 4K32P22 ������������������ 36.99 LEUPOLD RUGER & SAKO RINGS Smooth Contours For Great Looks — Advise # — 30mm Rings, 4K34P80 ���������������������������� 40.99 DUAL DOVETAIL MOUNT RINGS - Heights from Low for small Windage adjustable rings to fit directly onto scopes to Super High for giant objective bells. Sold in Pairs. Ringmounts Fit Directly — Advise # — 30mm Extension Rings, 4K00FQN ������� 50.99 Onto Factory Integral Bases Ruger integral bases. SPECS: Steel. Finish: PB, polished, blue; Matte, matte, blue; Silver, matte. SPECS: Available in Polished Blue (PB) or Matte Blue (MB). Height is from top of base to center of rings. Famous Leupold styling and quality in rings that STOCK # DIAMETER/DESCRIPTION/FINISH HEIGHT mount directly to the integral dovetails on Ruger® STOCK # SIZE/FIN./HGHT. FITS #526-408-250AV 1"/Low/PB .650" and Sako rifles. ab #750-522-810AV 1", PB, high M77 - 2.2" to 2.5" dia. objective SPECS: Steel, high-polish blue (PB) or matte blue (MB) #750-522-809AV 1", MB, high M77 - 2.2" to 2.5" dia. objective TALLEY THOMPSON CENTER #526-462-220AV 1"/Low/Matte .650" finish. Ring heights are from top of base to center of ring. #526-523-130AV 1"/Low/Silver .650" #750-522-820AV 30mm, MB, high M77 - up to 56mm objective ENCORE RINGS & BASE #526-444-240AV 1"/Medium/PB .770" STOCK # FITS FINISH DIA./HT. — Advise # — 1" PB Ruger Rings, 5E29J13 ���������������������� $ 39.99 Lightweight, Durable & Practical #526-462-250AV 1"/Medium/Matte .770" #526-423-460AV Ruger No.1 & 77/22® PB 1"/Low .734" — Advise # — 1" MB Ruger Rings, 5E40M57 �������������������� 48.99 #526-523-230AV 1"/Medium/Silver .770" #526-502-170AV Ruger No.1 & 77/22 MB 1"/Hi 1.150" — Advise # — 30mm MB Ruger Rings, 5E46D15 ������������ 54.99 One-piece ring and base elimi- ® nates the joint between the ring and #526-470-540AV 1"/High/PB .900" #526-499-520AV Ruger M77 MB 1" High Rings base to provide a rigid mounting #526-470-570AV 1"/High/Matte .900" #526-463-950AV Ruger M77 PB 1" Super High Rings platform that reduces ring alignment #526-000-061AV 1"/High/Matte/Ext. .900" #526-499-440AV Ruger M77 MB 1" Super Hi Rings problems and prevents kinking a scope. Surprisingly lightweight yet #526-470-640AV 1"/Super High/Matte 1" #526-510-410AV Ruger M77 MB 30mm Med Rings durable, machined from high-grade aluminum, these rings won’t WARNE RUGER® #526-510-420AV Ruger M77 MB 30mm Hi Rings add a lot of extra weight that can bog you down at the range or in #526-522-420AV 30mm/Low/Matte .650" the field. Accepts 1" diameter scope tubes. ab #526-499-570AV 30mm/Medium/Matte .770" #526-510-430AV Ruger M77 MB 30mm Super Hi Rings CARBINE BASE SPECS: Extruded, CNC machined 7000 series aluminum, black. Fits #526-499-580AV 30mm/High/Matte .900" #526-000-306AV Ruger M77 MB 34mm High Easily Mount Electronic scopes with 1" diameter tubes. Low fits scopes up to 44 mm objective #526-000-062AV 30mm/High/Matte/Ext. .900" #526-423-420AV Sako PB 1"/Low .734" Sights On Ruger Carbines with standard barrel contour. Medium fits scopes up to 50 mm objective #526-522-340AV 30mm/Super High/Matte 1" #526-423-430AV Sako PB 1" Med Rings with standard barrel contour. High fits scopes with a 56 mm objective 100-028-643AV 34mm/Medium/Matte .770" #526-461-900AV Sako PB 1" Hi Rings Convert Ruger PC9, PC40, Ranch Rifle and Mini-30 to Weav- with standard barrel contour. Four mounting screws and Allen wrench ® #526-510-360AV Sako MB 30mm Med Rings er-style mount. Provides mounting for Holosight , Dot sights and included. — Advise # — 1" Dual Dovetail Rings, 4K00EBA ������������� $ 28.99 scopes. Attaches directly to the Ruger ring cuts in the receiver, no #526-510-370AV Sako MB 30mm/Hi 1.05" RIFLE #874-000-089AV TC Encore Rings & Base, Low, 4G00JCF​ �������$ 57.99 — Advise # — 1" Extension Rings, High, 4K00CIK ��������� 33.99 gunsmithing required. ab #874-000-090AV TC Encore Rings & Base, Med, 4G00CLR​ ����� 49.99 — Advise # — 30mm Dual Dovetail Rings, 4K00IZM ����� 43.99 — Advise # — 1" Ringmounts, 4K00ILR ����������������������������� $ 77.99 SPECS: Aluminum, matte black. 4.75" (12cm) long. #874-000-091AV TC Encore Rings & Base, High, 4G00PEG​ ����� 48.99 — Advise # — 30mm Ext. Rings, High, 4K00EEK ����������� 45.99 — Advise # — 30mm Ringmounts, 4K69G90 ������������������� 82.99 #947-010-000AV Carbine Base, 7D37K99​ �������������������������� $ 39.99

GUARANTEED. FOREVER.®

PAGE 266 SINCE 1939 Office/Tech: 641-623-5401 RUGER® FACTORY SCOPE RINGS TACTICAL PRECISION S&K S&K SCULPTURED MOUNTS & For Precise, Solid Scope Mounting HRT™ RINGS NO-DRILL, NO-TAP SCOPE MOUNT KONTOURED RINGS On Ruger Rifles & Handguns Superior Scope-To-Ring Contact With A Easily Add A Scope To Bolt & Semi- Almost-Invisible Rings, Plus Light, RINGS & BASES High-quality Ruger factory rings Slim-Line Look Auto, Military & Sporters Cutaway Bases install easily and provide solid, zero- Precision, CNC-machined, tactical rings of- Direct, bolt-on installation; no One of the slickest, smoothest movement scope attachment to Ru- fer superior holding power in a smooth, con- drilling and tapping required. Replace ger rifles and handguns with integral bases, No. 1 rifles with factory ring/base combinations ever. The toured design for light weight and minimum bulk. Made from 7075 the original, open sights with the S&K ring is split, vertically, at the mount- base, and No. 3 rifles with special factory bases available below. aluminum billet or extra strong, 1215 steel alloy. Guaranteed, .0002" Mount; install your favorite scope with Low, Medium, High, and Extra-High heights in blued carbon steel, ing post with absolutely no screws or even any “lumps,” just wrap it cylindrical roundness between ring base and top strap ensures ex- a set of Weaver-style rings and go around the scope, squeeze together and slip the post into the S&K natural stainless steel, or stainless with Ruger’s proprietary matte cellent tube-to-ring contact; prevents scope tube “pinch” and elim- shooting. This is the easiest, quickest ® base. Dual opposed, conical screws serve as ring clamp screws, and Target Grey finish. inates the need to lap prior to scope mounting. Steel alloy, cross- way we’ve seen to get smaller groups from these guns without mak- ® ® also provide windage and alignment adjustments. Sculptured bases RINGS FOR: No. 1, No. 3, Mark II Pistol, 77/22 , 77/22 Mag., bolt and hex nut gives positive locking on Picatinny and Weaver ing modifications that could hurt the resale or collector value. Pre- ® ® ® give a “finished” look and save weight. ab Mini-14 Ranch Rifle, Mini-Thirty , Redhawk ® style bases. Four, Torx head screws prevent scope shift under the cision-machined and finished in a matte black that doesn’t reflect SPECS: Steel, blue, matte finish. Bases (Rem 700) weigh 2.1 oz (59.5 g), Available as single rings only. Order TWO (2) of the SAME ring heaviest recoil. Sold in pairs. ab light. Blends in well with the original military finishes. The only way to for these firearm models. ab Rings, 1" or 30mm, 1.1 oz (31 g). Approximate ring height from top of SPECS: 1215 steel alloy or 7075-T651 aluminum, matte black. Height mea- go when scoping those extra-hard, stainless Mini-14s. Models with base to center of ring. 1" Low - .642" (16.3mm). 1" High - .778" (19.7mm). SPECS: Carbon steel, polished blue finish (BL), stainless steel, natural (SS), sured from top of base to center of ring. 1" - Medium: .985" (25mm). High: No rings feature a Weaver-style base; supplied without rings. ab 30mm Low - .732" (18.6mm), 30mm High - .950" (24.1mm). Rings and ® or Target Grey (TG) finish. Ring heights measured from top of base to 1.185" (30mm). 30mm - Medium: 1.075" (27.3mm). High: 1.225" (31.1mm). SPECS: Base - Aluminum, black, matte, anodized or powder coated. Sizes bases available in pairs only. bottom of scope tube. Low - .325". Medium (Med.) - .435". High - .565". Fits Picatinny and Weaver-style mounts. vary. S&K 1" Rings - Steel, black, matte finish. Height: .140" (3.6mm) top of Extra-High (X-High) - .680". base to bottom of ring. Fits - No. 1 Mk III Lee Enfield, also includes instruc- STOCK # FITS STOCK # HGT MATERIAL SIZE PRICE tions to fit Ishapore, .308 cal. rifles. Mini-14 will not fit Ranch or Mini-30. #794-525-098AV Mauser 98, military & comm., 1.4" dia. STOCK # RUGER PART # FINISH HEIGHT #100-001-474AV Medium Steel 1" 9K79C79 $ 96.99 Mosin Nagant M44 and Schmidt-Rubin K31 replace rear sight, use long #794-525-096AV Mauser 96, small ring, 1.2" dia. 1" RINGS #100-001-475AV High Steel 1" 9K83D11 $ 99.99 eye relief pistol or scout scopes, or dot sights. #794-525-700AV Remington 700/721/722/725 long & short #834-000-002AV 3B BL Low #100-001-476AV Medium Alum 1" 9K62G63 $ 86.99 STOCK # FITS RINGS PRICE #794-525-070AV Winchester 70 std, 670, 770 #834-000-005AV 3K SS Low #100-001-477AV High Alum 1" 9K65K44 $ 90.99 #794-001-014AV Mini-14 181 Series No 4G49J27 $ 64.99 #780-001-250AV 3KTG TG Low #100-001-478AV Medium Steel 30mm 9K87J76 $ 105.99 — Advise # — Sculptured Mount Base, 4G39I37 ������������ $ 43.99 #794-000-002AV Mini-14 180 Series No 4G56L44 $ 58.99 #834-000-003AV 4B BL Med. #100-001-479AV High Steel 30mm 9K90D96 $ 109.99 #794-500-100AV Low 1" Kontoured Rings, 4G46A09​ ���� $ 52.99 #794-001-114AV M1A/M14 No 4G60P21 $ 62.99 #834-000-006AV 4K SS Med. #100-001-480AV Medium Alum 30mm 9K66H83 $ 92.99 #794-500-102AV High 1" Kontoured Rings, 4G50C89​ �� 56.99 #794-001-130AV M1 Carbine No 4G53A62 $ 55.99 #834-003-001AV 4KHM Matte SS Med. #100-001-481AV High Alum 30mm 9K69I61 $ 96.99 #794-000-001AV Low 30mm Kontoured Rings, ​ 4G76C20 #780-001-248AV 4KTG TG Med. #794-001-100AV M1 Garand No $ 84.99 4G55N78 ���������������������������������������������������� 73.99 4G58K57 #834-000-004AV 5B BL High #794-000-011AV Mosin Nagant M44 No $ 66.99 #794-500-030AV High 30mm Kontoured Rings, ​ 4G54I85 4G68B18 ���������������������������������������������������� 73.99 #834-000-007AV 5K SS High #794-001-111AV No. 1 Mk III Lee Enf. No $ 71.99 4G62B93 #780-001-249AV 5KTG TG High #794-001-045AV 4 and 5 Lee Enfield No $ 69.99 TALLEY TACTICAL SCOPE RINGS 4G49A37 #834-003-002AV 6B BL X-High #794-001-017AV 1917 Enfield No $ 64.99 #794-000-007AV Schmidt Rubin K 31 S&K 4G55G05 $ 69.99 #834-000-008AV 6K SS X-High Billet Machined For Strength; TACTICAL PRECISION #780-001-251AV 6KTG TG X-High Dual Recoil Lugs Stay Put 03A3 MOUNT - No need to drill and tap 30MM RINGS Heavy-duty scope rings are precision- a rock-hard Springfield with this No- TSR™ & TSR “W” RINGS #834-008-001AV 4B30 BL Med. machined from solid billet aluminum with dual Drill, No-Tap Mount. No need to bend Super Holding Power, Precision Alignment #780-001-253AV 4K30 SS Med. recoil lugs to ensure your tactical scope won’t the bolt, a simple grinding of the bolt #834-008-002AV 5B30 BL High budge under the heaviest recoil. Full-width ring handle for clearance is all that’s needed. Rugged tactical rings are precision machined #834-008-007AV 6B30 BL X-High caps are cut from the same billet as the bottom half of the ring for pre- Blends in well with original finish. ab to tolerances of .0002" for maximum scope/ring cise fit and held in place with four stainless steel Allen head screws that SPECS: Alum., black, anodized. Uses standard Weaver-style 1" (2.5cm) contact to hold scope securely against recoil. 5 won’t work loose when properly tightened. Matching serial numbers rings, not supplied. Wt. 3 oz. (85 g). 5 /16" (13.5cm) long. — Advise # — Ruger Scope Ring, each, 8G29M24 �����������$ 31.99 Four-screw cap lets you align the reticle, tighten ensure you always mate the cap with the bottom it came with. Lock- #794-001-033AV S&K 03A3 Springfield Mount, ​ the left side of the cap, then the right side without — Advise # — Ruger Scope Ring, each, 8G28M68 ��������� 33.99 1 ing bar, heavy-duty crossbolt and oversized, /2" hex nut locks the ring 4G55J07 ����������������������������������������������������� $ 71.99 the scope rotating. Large clamp-nut lets you torque ring to base. #780-004-125AV SC-24VA-A Scope Bases for No. 1V to any MIL-STD 1913 Picatinny rail. Hard-anodized for extra surface Radiused edges and corners help prevent snagging while providing Rifle, Blued, 8G32J17​ �������������������������������$ 33.99 strength, with a non-reflective matte black finish. Engraved front and U.S. KRAG MOUNT - Easily installed with attractive appearance. TSR - 7075-T6 aluminum, fits MIL-STD 1913 back with the distinctive Talley cross-bones logo. ab no drilling or tapping required. High tensile Picatinny base. TSR “W” Series - 1215 alloy steel, fits Weaver bases. SPECS: 7075 T6 aluminum, hardcoat anodized, matte black, with 303 stain- strength alloy base furnished with stream- 34mm - Accepts Schmidt & Bender-type 34mm scope tubes. Heights RINGS FOR: M77®, M77 MARK II & SUPER REDHAWK® less steel screws, black finish. 1.9" (5cm) wide, .665" (16.8mm) thick. Models lined, S&K horizontally split rings. ab in tables below are measured from top of base to center of ring. ab 5 These models require front and rear scope rings of different available for 1" (2.5cm) or 30mm O.D. scope tubes. Heights measured from SPECS: Aluminum base, anodized black, matte. Steel rings, blue matte SPECS: /8" (15.8mm) wide. TSR - 7075-T6 Aluminum black, hard anodized heights. On M77/M77 Mark II, the shorter ring always mounts at the top of base to center of ring: Low - 1" (2.5cm); High - 1.275" (3.2cm). finish. Steel clamp screws. to Mil-A-8625 standards. TSR “W” Series - 1215 alloy steel, Mil-C-13924 front of the receiver and the higher ring at the rear. On the Super #874-000-114AV 1" Tactical Rings, High, 4G00JID​ ���������$ 169.99 #794-001-098AV S&K Krag Base, 4G74L47​ ����������������������� $ 96.99 oxide finish, matte black. Redhawk, the higher ring is always at the front of the frame and the #874-000-115AV 30mm Tactical Rings, Low, ​ TSR ALUMINUM RINGS lower ring at the rear. ab 4G157A58 ������������������������������������������������� 181.99 MOSIN NAGANT MOUNT - No drilling, tapping or Available as single rings only. Order one (1) FRONT and one (1) bolt modifications. Aluminum base replaces the STOCK # HEIGHT SIZE PRICE #874-000-117AV 30mm Tactical Rings, High, ​ REAR ring from table below. rear sight, and accepts a long eye relief, scout or #100-000-951AV Low - .785" 1" 9K62M63 $ 86.99 4G00FPQ ������������������������������������������������� 156.99 handgun scope. Includes S&K, horizontally split #100-000-952AV Med - .985" 1" 9K62N63 $ 86.99 STK# FRONT STK# REAR FINISH HEIGHT ab steel rings. #100-000-953AV High - 1.185" 1" 9K65P44 $ 90.99 1" RINGS SPECS: Mount - Aluminum, anodized, black, matte finish. 1" Rings - Steel, #100-000-957AV Low - .925" 30mm 9K66F83 $ 92.99 #834-000-002AV 3B NA — BL Low blue, matte finish. M91 fits M91/30 and M91/59. M44 fits M44 Carbine. #100-000-958AV Med - 1.075" 30mm 9K66L83 $ 92.99 #834-000-005AV 3K NA — SS Low #794-000-004AV M91 Mosin Nagant Mnt, 4G64B91​ �������$ 69.99 #100-000-959AV High - 1.225" 30mm 9K69C61 $ 96.99 #780-001-250AV 3KTG NA — TG Low STK# FRONT STK# REAR FINISH HEIGHT #794-000-005AV M44 Mosin Nagant Mnt, 4G53F51​ ������� 69.99 #834-000-003AV 4B #834-000-003AV 4B BL Med. 30mm RINGS TSR “W” SERIES STEEL RINGS S&K 96 & 98 MAUSER - Tough, light aluminum #834-000-006AV 4K #834-000-006AV 4K SS Med. #834-008-001AV 4B30 NA — BL Med. mount clamps securely to receiver; no drill- STOCK # HEIGHT SIZE PRICE #780-001-248AV 4KTG #780-001-248AV 4KTG TG Med. NA — #834-008-002AV 5B30 BL High ing or tapping required. Fits bent bolt models #100-001-403AV Low - 785" 1" 9K79D79 $ 96.99 #834-000-004AV 5B #834-000-004AV 5B BL High — Advise # — Ruger Scope Ring, each, 8G29M24 �����������$ 31.99 only, others will require bolt modification. #100-001-404AV Med - 985" 1" 9K79D79 $ 96.99 Includes S&K rings. Requires minor stock RIFLE #834-000-007AV 5K #834-000-007AV 5K SS High — Advise # — Ruger Scope Ring, each, 8G28M68 ��������� 33.99 9K83N11 modification. ab #100-001-405AV High - 1.185" 1" $ 99.99 #780-001-249AV 5KTG #780-001-249AV 5KTG TG High #100-001-409AV Low - .925" 30mm 9K87A76 $ 105.99 RUGER 10/22® SCOPE BASE ADAPTER - Mounts to the top of the SPECS: Mount - Aluminum, anodized, black, matte NAw — #834-003-002AV 6B BL X-High 1 10/22 receiver and allows the 10/22 to accept any ring designed finish. 5 /4" (13.3cm) long. 1" Rings - Steel, blue, matte finish. #100-001-410AV Med - 1.075" 30mm 9K87A76 $ 105.99 NA — #834-000-008AV 6K SS X-High for .22 rifles with dovetailed receivers. ab #794-000-003AV S&K 98 Mauser Mount, 4G92B20​ �������� $ 98.99 #100-001-411AV High - 1.225" 30mm 9K90K96 $ 109.99 NA — #780-001-251AV 6KTG TG X-High #780-004-222AV 10/22 Scope Base Adapter, 8G8J77​ �� $ 9.09 #794-000-006AV S&K 96 Mauser Mount, 4G56F31​ �������� 69.99 #100-003-300AV Med - 1.185" 34mm 9K119G68 $ 144.99

order on the web

Orders: 800-741-0015 brownells.com PAGE 267 TALLEY TALLEYSCOPE RINGS & BASES VORTEX MATCHED RINGS LIGHTWEIGHT SCOPE MOUNT Fixed Or Quick Detach Models Anchor Solidly To Shouldered Bases; Provides A Clean, Uniform Manufactured In Pairs For Precision Fit Look When Every Ounce Counts; Machined to .0005" tolerances from The Strength Of Steel Without Beautifully machined from solid, steel or stainless steel bar stock to form a rock-solid scope mounting 7075 T6 billet aluminum, these scope The Weight system that looks as good as it functions. Vertically-split ring design with dual screws provides maximum rings are kept in numbered pairs through- holding power for scopes with 1" or 30mm diameter tubes. Rings lock securely into unique, dovetail bases out the manufacturing process for pre- One-piece construction blends featuring a double shoulder that completely prevents any movement, and counters the heaviest recoil. Low cise fitting and alignment with your the ring and base into a single unit. Together, they create a clean, contoured appearance on any sporting rifle. ab scope tube. Perfect for large-diameter, Eliminating the ring/base joint not light-gathering scope tubes being used only keeps weight to a minimum, it provides a stronger mount. Each QUICK DETACH RINGS - Include precision machined, QD levers for fast, easy scope installation and removal, plus button-head screws 5 for tactical, and long-range applications. ring cap is /8" wide, with four TORX screws to keep large scopes from for optional fixed ring application if desired. SPECS: Steel, blue, satin finish or stainless steel (SS), natural finish. Models available for 1" or 30mm diameter scope tubes. Ring heights measured Vibratory tumbling, followed by a hand slipping or shifting. Designed by Mel Forbes of New Ultralight Arms. ab bead-blasting process ensures that these RINGS & BASES SPECS: 7000 series aluminum, black, anodized, matte finish. Accepts 1" from top of base to bottom of ring. Low - .300" (7.62mm). Medium - .400" (10.16mm). High - .500" (12.7mm). X High - .600" (15.2mm). Fit Talley Medium bases only. Available in pairs. rings won’t snag on clothing or other dia. scopes, unless otherwise listed in fits column for 30mm dia. scopes. gear. Type III hard coat anodizing elimi- Height from bottom of ring to top of receiver: Low - .400" (10.1mm), STOCK # FINISH SIZE HEIGHT PRICE nates reflections, and enhances surface Med - .500" (12.7mm). High - .640" (16.3mm), X-High - .740" (18.8mm). #874-025-101AV Blue 1" Low 4G114G06 $ 116.99 abrasion resistance. Grade 8 fasteners Approx. weight 2.1 oz. (59 g). Some heights vary, see chart below. Rem. lock the rings and scope securely to your 700 also fits 721/722/725 and 40X models. Rem. Model Seven fits receiv- #874-000-104AV SS 1" Low 4G00NJS $ 145.99 Medium-Plus weapon with the supplied Torx wrench. ers with four screw holes. Savage AccuTrigger fits round top centerfire #874-025-102AV Blue 1" Medium 4G96D36 $ 116.99 Select models fit Weaver mounts. ab receivers with AccuTrigger. Win. 70 fits .860" rear hole spacing only. #874-025-103AV Blue 1" High 4G89I68 $ 106.99 SPECS: 7075 T6 billet aluminum, Type III STOCK # FITS HEIGHT PRICE #874-025-104AV Blue 1" X High 4G90P87 $ 114.99 hard coat anodized, matte black. Available #874-000-026AV Anschutz 54 Med 4G39G14 $ 46.99 #874-025-301AV Blue 30mm Low 4G101D47 $ 122.99 for 35mm, 34mm, and 30mm scopes. Height measured from base to center of #874-000-027AV Browning A Bolt Low 4G34L79 $ 44.99 #874-025-302AV Blue 30mm Medium 4G90D95 $ 114.99 High scope. #874-000-028AV Browning A Bolt Med 4G34P79 $ 44.99 #874-025-303AV Blue 30mm High 4G89B68 $ 107.99 #874-000-041AV Howa Low 4G00LKF $ 43.99 #874-000-080AV Blue 30mm X High 4G92E20 $ 112.99 STOCK # SIZE HEIGHT PRICE #874-000-042AV Howa Med 4G36P11 $ 42.99 FIXED SCOPE RINGS - include low-profile, button-head Torx® screws for mounting applications where permanent #100-006-719AV 35mm Med .95" 3B149F99 $ 149.99 #874-000-037AV 98 Mauser Lg Ring Low 4G39A14 $ 46.99 scope mounting is preferred. 100-013-129AV 35mm Med.-Plus 1" 3B149I99 $ 149.99 #874-000-039AV Marlin 336/1895 (.500") Low 4G38Q62 $ 45.99 SPECS: Steel, blue, satin finish or stainless steel (SS), natural finish. Models available for 1" or 30mm diameter scope tubes. #100-006-720AV 35mm High 1.26" 3B149K99 $ 149.99 #874-000-040AV Marlin 336/1895 (.600") Med 4G38I62 $ 45.99 Ring heights measured from top of base to bottom of ring. Low - .300" (7.62mm). Medium - .400" (10.16mm). High - .500" #100-013-132AV 34mm Med. .92" 3B00NSJ $ 149.99 (12.7mm). X High - .600" (15.2mm). Fit Talley bases only. Available in pairs. #874-000-110AV Rem. 700 30mm Low 4G36J26 $ 42.99 #100-013-131AV 34mm Med.-Plus 1" 3B00PLC $ 149.99 #874-000-111AV Rem. 700 30mm Med 4G36I97 $ 43.99 STOCK # FINISH SIZE HEIGHT PRICE #100-017-325AV 34mm Med.-High 1.1" 3B149P99 $ 149.99 #874-000-043AV Rem. 700 Ext. Low 4G00KAP $ 42.99 #874-000-001AV Blue 1" Low 4G65A01 $ 76.99 #100-013-130AV 34mm High 1.26" 3B149N99 $ 149.99 #874-000-044AV Rem. 700 Ext. Med 4G39A97 $ 40.99 #874-000-106AV SS 1" Low 4G99N69 $ 117.99 #100-017-324AV 34mm Extra-High 1.45" 3B149I99 $ 149.99 #874-000-047AV Rem. Model Seven Low 4G39H14 $ 46.99 #874-000-002AV Blue 1" Medium 4G65M01 $ 76.99 #100-013-135AV 30mm Low .87" 3B129M99 $ 129.99 #874-000-048AV Rem. Model Seven Med 4G39G14 $ 46.99 #874-000-107AV SS 1" Medium 4G87P54 $ 96.99 #100-013-134AV 30mm Med. .97" 3B129H99 $ 129.99 #874-000-049AV Ruger® 10/22® Low 4G38N62 $ 45.99 #874-000-003AV Blue 1" High 4G65A01 $ 76.99 #100-013-133AV 30mm High 1.26" 3B00JRH $ 129.99 #874-000-050AV Ruger 10/22 Med 4G36K90 $ 43.99 #874-000-005AV Blue 30mm Low 4G65Q01 $ 76.99 #100-019-180AV 30mm Extra-High 1.45" 3B129F99 $ 129.99 #874-000-093AV Sav. AccuTrigger Low 4G36E90 $ 43.99 #874-000-006AV Blue 30mm Medium 4G65J01 $ 76.99 #100-019-181AV 30mm Med. .97" 3B00IAR $ 129.99 #874-000-094AV Sav. AccuTrigger Low Ext. 4G00QJF $ 40.99 #874-000-007AV Blue 30mm High 4G67A98 $ 74.99 #100-019-182AV 1" Low .76" 3B00QVF $ 129.99 #874-000-096AV Sav. AccuTrigger Med Ext. 4G00QIF $ 40.99 #874-000-081AV Blue 30mm X High 4G56C11 $ 68.99 #874-000-102AV Sav. AccuTrigger High 4G35P80 $ 42.99 #874-000-103AV Sav. AccuTrigger X-High 4G34H79 $ 44.99 SCOPE RING BASES - Feature Talley’s proven, machined saddle design with double recoil shoulders to completely immobilize the rings under heavy recoil. Bases accept both Fixed and QD Talley rings. #874-000-055AV Tikka (.500" high) Low 4G36N22 $ 42.99 SPECS: Steel, blue, satin finish or stainless steel (SS), natural finish. Available in pairs. Accept Talley Fixed or QD rings only. #874-000-056AV Tikka (.600" high) Med 4G00KAP $ 42.99 STOCK # FINISH FITS HOLE SPACING PRICE #874-000-060AV Wthby Mark V Med 4G00FIQ $ 42.99 #874-000-017AV Blue Browning A-Bolt (except Titanium model) — 4G25E13 $ 29.99 VORTEX #874-000-063AV Win. 70 .860" Rear Low 4G00MKI $ 42.99 #874-026-098AV Blue Mauser 98 — 4G25I13 $ 29.99 #874-000-064AV Win. 70 .860" Rear Med 4G37M14 $ 43.99 TACTICAL 30MM SCOPE #874-026-701AV Blue Rem. 700, 721, 722, 725, 40X/Howa — 4G23M48 $ 30.99 #874-000-065AV Win. 70 .860" Rear F/Ext. Low 4G40A70 $ 47.99 #874-000-105AV SS Rem. 700, 721, 722, 725, 40X/Howa — 4G40Q91 $ 45.99 RINGS #874-000-021AV Blue Rem. 700 Extension front/std rear — 4G30H80 $ 40.99 Low #874-000-075AV Blue Sako Long, L61R, L691, M995, IV, V — 4G39M00 $ 45.99 #874-000-077AV Blue Sako Short, L461, L579, S491, M591, I, II, III — 4G39A00 $ 45.99 #874-000-097AV Blue Savage Accutrigger Std. — 4G25L13 $ 29.99 #874-000-079AV Blue Thompson Center Encore — 4G33L71 $ 39.99 VORTEX HUNTER SCOPE RINGS #874-026-010AV Blue Weatherby Mk V 9-lug bolt — 4G28H27 $ 29.99 Constructed of aircraft #874-026-070AV Blue Win. 70, all except Magnums .860" 4G23D16 $ 29.99 grade 6061-T6 aluminum, #874-026-071AV Blue Win. 70, Pre ’64 .300 & .375 Mag. .435" 4G25G35 $ 30.99 Extra High - 1/3 Extra High - High Medium Co-Witness Co-Witness these rings solidly attach #874-026-072AV Blue Win. 70, Post ’64 .300 & .375 Mag. .330" 4G24C06 $ 29.99 to Picatinny or Weaver- These wide, 6-screw tactical riflescope rings securely mount style bases. The standard, your scope to any Picatinny or Weaver type rails. Rings offer solid 2-screw hunter rings are Low Medium High support for scopes with 30mm tubes. Sold one ring per package. ideal for general hunting setups. Anodized finish helps resist scratches and corrosion. #100-013-148AV 30mm Tactical Ring, Low, 3B19M99​ �� $ 19.99 #100-013-149AV 30mm Tactical Ring, Medium, ​ #100-013-142AV 30mm Hunter Rings, Low, 3B00QRQ​ ��� $ 19.99 3B19P99 ���������������������������������������������������� 19.99 #100-013-143AV 30mm Hunter Rings, Med, 3B00EDI​ ��� 19.99 #100-013-150AV 30mm Tactical Ring, High, 3B19P99​ �� 19.99 #100-013-144AV 30mm Hunter Rings, High, 3B00FYF​ ��� 19.99 #100-013-151AV 30mm Tactical Ring w/ Co-Witness,

RIFLE #100-013-145AV 1" Hunter Rings, Low, 3B00PBK​ ����������� 19.99 Extra-High Absolute, 3B00NCB​ ������������ 19.99 1 #100-013-146AV 1" Hunter Rings, Medium, 3B19N99​ ����� 19.99 #100-013-152AV 30mm Tactical Ring w/ /3 Co-Witness, #100-013-147AV 1" Hunter Rings, High, 3B00LZD​ ����������� 19.99 Extra-High Lower, 3B00DHF​ ���������������� 19.99

GUARANTEED. FOREVER.®

PAGE 268 SINCE 1939 Office/Tech: 641-623-5401 WARNE MAXIMA 2-PIECE BASE SETS WARNE MAXIMA TACTICAL WARNE Weaver-Style In Steel RINGS & BASES MAGNUM SPECIAL

Smooth, solid steel two-piece bases provide an extra strong mount system. Accept Warne Maxima rings Rigid, Steel Construction For APPLICATION MAXIMA RINGS RINGS & BASES or any Weaver-style ring. Three finishes. ab Maximum Strength SPECS: 12L14 steel. Available in polished blue, matte blue, or silver. Two-piece only, Includes mounting screws. Do not mix Maxima bases with other brands of Weaver-style base, the heights are often different. RHS = Rear Hole Spacing. Rugged Steel, Close-Tolerance Picatinny Dovetails For Secure Mounting STK# POLISHED STK# MATTE STK# SILVER FITS tactical rings #947-000-159AV #947-000-160AV #947-000-211AV Browning BAR, BAR II, Mark II, BLR Lightning, BPR, T-Bolt; Colt Coltsman, 264 & 30-06 and bases, precision-machined from steel for maximum strength Vertically split rings, precision- and reliability. Rugged, 1" and 30mm Tactical Rings feature a robust, machined from steel barstock, Round Top (Enfield/Rem 30 style); Marlin Camp 9 & 45; Rem 30 & 720; Sav 40 & 45; Win SXR stainless steel crosslug that will not swage, peen or deform under hold large objective, heavy scopes #947-000-161AV #947-000-162AV NA Browning BLR (steel receiver); Colt 223, 243 & 308 Round Top; Sauer SHR Pro Hunter heavy recoil. Ensures consistent return-to-zero for optics that are firmly against recoil. Finished to NA #947-000-406AV NA CVA-V2 Round Barrel Ext Rear removed and re-attached. Three, Torx-style fasteners secure the exacting tolerances so the scope #947-000-167AV #947-000-168AV #947-000-215AV Marlin 9, 45, 30AS, 36, 62, 93, 336, 336C, 375, 1893, 1894 Cowboy, 1895, 444; Glenfield 30, vertically split ring halves at the top to prevent scope shift. Large, returns to zero, even after repeat- Zane Grey, 989, 22 Auto (.500" hole spacing) clamping nut at bottom provides exceptional holding power. One- ed dismounting and remounting. piece, Tactical Bases are made from solid bar stock of cold drawn Permanent mount (Perm) uses two socket screws to solidly lock #947-000-169AV #947-000-170AV NA Mauser 98 altered; Mauser FN (military model); Charles Daly; CIL 972; Colt 57; H&R (pre alloy steel, stress relieved for extra strength and uniformity. Available rings to base. Quick detach (QD), double lever rings clamp quickly 1973) 300, 301, 330, 370; Interarms Mark X & Viscount; Marlin 455; Musgrave MK III & IV; for standard elevation adjustment or with 20 MOA forward angle for and tightly; dismount instantly when you lift the lever. Levers can Parker Hale 1000, 1000C, 1100, 1200, 1700; Rem 798; Voere 2150, 2165-1, 2165-2, 2165-3, extra long range shooting. ab be repositioned so both rest at the same angle. Ultra High rings give 2165-4 SPECS: Rings: Steel, matte black, powder coat finish. Medium - .375" correct height for flattop AR-15 and H&K SL7 rifle. ab #947-000-171AV #947-000-172AV NA Mauser 98 unaltered (9.5mm) high. High - .525" (13.3mm) high. Extra-High - .650" (16.5mm) SPECS: Steel, blued, matte finish. Height measured from top of base to #947-000-175AV #947-000-176AV NA Mauser Small Ring 96 unaltered high. Ultra-High - .935" (23.7mm) high. Bases: 12L14 carbon steel, pow- bottom of ring saddle. QD: 1" (2.5cm): X-High - .650" (16.5mm) and Ultra- der coated, matte black. Choose Standard (Std) or 20 MOA built-in eleva- High - .935" (23.7mm); 30mm (1.18"): X-High -.650" and Ultra-High - .850" #947-000-177AV #947-000-178AV #947-000-220AV Rem 700, 78, 721, 722, 725, 700 Muzzle Loader; BSA Monarch; Churchill Highlander; Herters tion. Savage bases available for models with and without AccuTrigger™. (21.6mm). Perm: 1" X-High - .650" and 30mm X-High - .650". All models U-9 Round Top; Howa 1500 & 1700; Mossberg 1500 & 1700; Raptor Arms long action; S&W Winchester bases fit current production Model 70. fit Warne Maxima, Weaver, and Picatinny bases. 1500, 1600, 1700; Weatherby Vanguard #947-000-183AV #947-000-151AV NA Charles Daly Mini Mauser; Interarms Mk X Mini Mauser, Rem 799 TACTICAL RINGS STOCK # DIA./HEIGHT TYPE PRICE #947-000-403AV NA NA Ruger® American Rimfire® #947-000-003AV 1"/X-High Perm 7D55K13 $ 61.19 STOCK # DIA./HEIGHT PRICE #947-000-192AV #947-000-193AV #947-000-227AV Savage Accu-Trigger; Carl Gustav 2000; Navy Arms Country Boy Muzzle Loader; All Center #947-000-004AV 1"/X-High QD 7D79N63 $ 88.39 #947-000-112AV 30mm/Medium 7D100Q90 $ 111.99 Fire; Shilen Round Receiver; Stevens 200; Win 88 & 100 #947-000-005AV 1"/Ultra High QD 7D79I63 $ 88.39 #947-000-125AV 30mm/High 7D100K90 $ 111.99 #947-000-194AV NA NA Steyr Mannlicher L & LS #947-000-008AV 30mm/X-High Perm 7D55E13 $ 61.19 #947-000-126AV 30mm/Extra-High 7D100P90 $ 111.99 #947-000-196AV #947-000-197AV NA Steyr Mannlicher M & MS #947-000-009AV 30mm/X-High QD 7D93J33 $ 103.59 #947-000-127AV 30mm/Ultra-High 7D100F90 $ 111.99 #947-000-200AV #947-000-201AV NA Weatherby Mark V Magnum #947-000-010AV 30mm/Ultra High QD 7D93E33 $ 103.59 #947-000-202AV #947-000-203AV #947-000-232AV Win 670, 770, Win 70 Std. Pre & Post 64 with .860 RHS, WSM; Enfield Win 70-style; Kimber M89 BGR; Montana TACTICAL BASES NA #947-000-154AV NA Anschutz (All); Marlin A1, 50 STOCK # FITS TYPE PRICE NA #947-000-156AV #947-000-209AV Browning A-Bolt .22, Micro-Medallion; Steyr SBS #947-000-392AV Browning A-Bolt III SA Std 7D75A59 $ 95.99 NA #947-000-244AV NA Kimber 84 #947-000-391AV Browning A-Bolt III SA 20 MOA 7D100F90 $ 111.99 NA #947-000-245AV NA Kimber 8400 #947-000-393AV Browning A-Bolt III LA 20 MOA 7D88G59 $ 111.99 WARNE NA #947-000-166AV NA Knight Disc/Revolution; Mossberg 680, 695, 800, 50, 51, 151, 350, 351, 352; Rem 541-T, #947-000-395AV Nosler M48 SA 20 MOA 7D100N90 $ 111.99 541-S; Western Field 775, 780 MAXIMA RINGS #947-000-398AV Nosler M48 LA Std 7D86A48 $ 95.99 NA #947-000-174AV NA Mauser Small Ring 96 altered; High Standard High Power; Herters J-9; Husqvarna HVA Small #947-000-397AV Nosler M48 LA 20 MOA 7D100E90 $ 111.99 Strong, All-Steel With Adjustable Levers; Ring; HVA 1600 & 1900; Mauser Small Ring G33-40; Sears 511 #947-000-128AV Rem 700 SA Std 7D85L52 $ 95.99 Fit Weaver-Style Bases NA #947-000-180AV NA Rem New Mdl Seven, 600, 660, 670, 673, XP-100 #947-000-138AV Rem700 SA 20 MOA 7D100I90 $ 111.99 NA #947-000-404AV NA Ruger® American Rimfire® Give any gun equipped with Weaver- #947-000-129AV Rem 700 LA Std 7D85L52 $ 95.99 NA #947-000-182AV NA Benelli Black Eagle, Super Black Eagle Shotgun; Rem 7400, 7600, 76, 74, FOUR, SIX, New 750 style bases the good looks and quick-de- #947-000-139AV Rem 700 LA 20 MOA 7D100N90 $ 111.99 ® 10 ® tach/return-to-zero advantages of Warne NA #947-000-185AV NA Ruger /22 .22LR #947-000-400AV Ruger® American Std 7D86C48 $ 95.99 rings. Just two turns let you tip the ring off NA #947-000-189AV NA Sauer 202 Rifle® SA the base. Levers can be easily repositioned so NA #947-000-191AV NA Savage pre-2003 bolt action flat receiver #947-000-399AV Ruger® American 20 MOA 7D100G90 $ 111.99 both rest at the same angle. Models available for 1", 30mm and 34mm scope tubes. ab NA #947-000-199AV NA Weatherby Mark V Standard & .240WM Rifle® SA SPECS: Steel, powder-coated, Gloss Black, Matte Black, or natural NA #947-000-205AV NA Win 70 Post 64 Magnum .330 RHS ® #947-000-402AV Ruger American Std 7D75M59 $ 95.99 Silver. Height measured from top of base to inside bottom of ring. NA #947-000-207AV NA Win 70 WSSM ® Rifle LA Available in Low, .250" (6.35mm), Medium, .375" (9.5mm), or High, — Advise # — Maxima Base Set, Polished Blue or Matte Blue, 7D23A77 ����������������������������������������������������������������������������������������������� $ 26.39 #947-000-401AV Ruger® American 20 MOA 7D88L59 $ 111.99 .525" (13.3mm). — Advise # — Maxima Base Set, Silver, 7D30Q98 ������������������������������������������������������������������������������������������������������������������������������������� 34.39 Rifle® LA #947-000-140AV Sako TRG 20 MOA 7D100L90 $ 111.99 STOCK # FITS HEIGHT FINISH PRICE #947-000-141AV Savage SA 20 MOA 7D100Q90 $ 111.99 #947-523-000AV 1" LOW Gloss Black 7D61D62 $ 68.39 #947-000-133AV Savage SA, Accu- Std 7D86F48 $ 95.99 #947-623-000AV 1" LOW Matte Black 7D56H56 $ 62.79 Trigger #947-523-001AV 1" LOW Silver 7D61J62 $ 68.39 #947-000-143AV Savage SA, Accu- 20 MOA 7D100P90 $ 111.99 #947-523-100AV 1" MED Gloss Black 7D61P62 $ 68.39 WARNE 7.3/.22 RINGS Trigger #947-623-100AV 1" MED Matte Black 7D56M56 $ 62.79 #947-523-101AV 1" MED Silver 7D57E29 $ 68.39 Smooth Profile, Horizontal Split; Fit A Wide Variety bottom of ring. Medium – .406" (10.3mm) nominal high. High - .525" #947-000-132AV Savage LA Std 7D86G48 $ 95.99 #947-523-200AV 1" HIGH Gloss Black 7D61K62 $ 68.39 Of Rimfire Rifles (13.3mm) nominal high. QD Rings: Medium - .413" (10.5mm) nominal #947-000-134AV Savage LA, Accu- Std 7D86D48 $ 95.99 high. Trigger #947-623-200AV 1" HIGH Matte Black 7D57H64 $ 66.72 3 Rugged, all-steel rings fit rifles with /8" or #947-000-144AV Savage LA, Accu- 20 MOA 7D100A90 $ 111.99 #947-630-000AV 30mm LOW Matte Black 7D71B70 $ 79.59 RIFLE 11mm dovetail grooves. Reversible clamp flips to STOCK # DIA./HEIGHT FINISH PRICE Trigger #947-630-100AV 30mm MED Matte Black 7D71H70 $ 79.59 give you .010" nominal adjustment to ensure tight #947-000-096AV 1"/Med. Grooved Matte 7D28G46 $ 31.59 #947-000-390AV Savage B-Mag Alu- Std 7D00LQQ $ 35.99 #947-630-200AV 30mm HIGH Matte Black 7D71M70 $ 79.59 clamping. Ring straps secured with two screws each. Available in Matte, Gloss Black or Silver. ab #947-000-098AV 1"/High Grooved Matte 7D28P46 $ 31.59 minum #947-000-256AV 34mm LOW Matte Black 7D82Q88 $ 91.99 SPECS: Steel, powder coated, Matte Black or natural 947-000-361AV 30mm/Med. QD Matte 7D55L85 $ 61.99 #947-000-136AV Win 70 LA Std 7D86F48 $ 95.99 #947-000-257AV 34mm MED Matte Black 7D82K88 $ 91.99 Silver. Height measured from top of base to inside, 947-000-362AV 30mm/Med. QD Silver 7D51C37 $ 65.44 #947-000-146AV Win 70 LA 20 MOA 7D102L09 $ 107.99 #947-000-258AV 34mm HIGH Matte Black 7D82I88 $ 91.99

order on the web

Orders: 800-741-0015 brownells.com PAGE 269 WARNE WARNE WEAVER MAXIMA TPA RINGS MAXIMA RUGER®-BASE RINGS GRAND SLAM BASES Solid Steel, Two-Piece RIFLE MODEL STK# REAR STK# FRONT Rock Solid Mounting; Smooth, Permanent Mount, Smooth Profile Or Bases For Rifles, Hunting MARLIN 9, 36, 45, 62, 93, #955-000-072AV (S466)#955-000-072AV (S466) Snag-Free Style Quickly Removable QD Handguns 336, 375, 444, 1893, 1894, Vertically split rings mount directly to the fac- 1895, Camp Carbine, Two, socket-head cap screws pos- High-strength, steel tory integral bases on Ruger revolvers, bolt actions, 922M, 989, Glenfield 30 itively clamp these vertical-split steel bases to fit a wide range single shots and the Mini’s. Four TORX head screws rings to any Weaver-style base. Gives of modern and older rifles, MR7 #955-000-027AV (S47) #955-000-026AV (S46) solidly lock rings to scope and base. Solid stain- a nicely finished look. Hefty steel recoil plus some long range handguns. Sold each; order front and rear 455 #955-000-025AV (S45) #955-000-026AV (S46) less steel lug provides improved strength; won’t lug prevents shifting and loss of zero. base. (F) front, (R) rear EXTENSION BASES provide added flexibility deform under heavy recoil. ab MAUSER FN, HVA, Model #955-000-025AV (S45) #955-000-026AV (S46) Choice of three finishes: Gloss Black (GB), Matte Black (MB), or Silver for mounting all types of scopes. ab SPECS: MIM steel. Powder coat, matte black finish. Heights measured 98 large ring RINGS & BASES (SIL). Height measured from top of base to inside bottom of ring. ab SPECS: Steel, blue, matte finish. Fits Weaver Grand Slam, Top Mount, from top of base to inside bottom of ring. Sold per set (front and rear) Model 98 F/ext. #955-000-025AV (S45) #955-000-081AV (S402) Tip-Off and See-Thru Mount Rings. Includes screws. only. HVA, Swedish 96 small NA #955-000-026AV (S46) STOCK # HEIGHT FINISH PRICE ring STOCK # DIAMETER FINISH HEIGHT PRICE 1" MAXIMA TPA RINGS RIFLE MODEL STK# REAR STK# FRONT Model 95, 96 F/ext. NA #955-000-081AV (S402) #947-005-111AV Low (.250") GB 7D37G83 $ 41.99 RUGER-BASE PERMANENT RINGS NO.1, NO.3, 77/22®, ANSCHUTZ 54, 54MS, #955-000-040AV(S91) #955-000-040AV (S91) ® ® ® 1500, 1550, 1700 #955-000-024AV (S36) #955-000-023AV (S35) 7D32F42 MINI-14 & MINI-THIRTY , REDHAWK #947-005-112AV Low (.250") MB $ 35.99 64, 64MS, 164, 1413, 1500, 1550, 1700 F/ext. #955-000-024AV (S36) NA 7D37D83 #947-000-019AV 1" Mat Med - .460" 7D45Q40 $ 50.39 1422, 1424, 1430, 1432, #947-005-113AV Low (.250") SIL $ 41.99 MUSGRAVE Mark I, Mark II NA #955-000-026AV (S46) #947-005-121AV Medium (.375") GB 7D37C83 $ 41.99 #947-000-021AV 1" Mat High - .585" 7D45H40 $ 50.39 1433, 1434, 1522, 1530, ® Mark I, II F/extension NA #955-000-081AV (S402) #947-005-122AV Medium (.375") MB 7D32F42 $ 35.99 RUGER-BASE PERMANENT RINGS M77 & M77 MARK II, 1532, 1534 BLACKHAWK® HUNTER, SUPER REDHAWK Mark III, Mark IV #955-000-025AV (S45) #955-000-026AV (S46) #947-005-123AV Medium (.375") SIL 7D37L83 $ 41.99 1568 #955-000-033AV (S61) #955-000-026AV (S46) #947-000-025AV 1" Mat Med - .460" 7D45G40 $ 50.39 Mark III, IV F/extension #955-000-025AV (S45) #955-000-081AV (S402) #947-005-131AV High (.525") GB 7D37J83 $ 41.99 BROWNING A-Bolt, #955-000-027AV (S47) #955-000-027AV (S47) #947-000-027AV 1" Mat High - .585" 7D45H40 $ 50.39 NAVY ARMS Country Boy #955-000-026AV (S46) #955-000-026AV (S46) 7D31F96 A-Bolt 22 #947-005-132AV High (.525") MB $ 36.12 PARKER HALE 1000, #955-000-025AV (S45) #955-000-026AV (S46) BBR long & short action #955-000-027AV (S47) #955-000-026AV (S46) #947-005-133AV High (.525") SIL 7D37K83 $ 41.99 1000C, 1100, 1200, 1700 MAXIMA RUGER-BASE QD RINGS - Adjustable BSA Monarch med./L #955-000-024AV (S36) #955-000-023AV (S35) 30MM MAXIMA TPA RINGS RAPTOR ARMS 700 action #955-000-024AV (S36) #955-000-023AV (S35) lever rings mount to factory integral bases. Pro- action #947-005-311AV Low (.250") GB 7D48A28 $ 53.59 vides true, quick-detach capability. Levers may be 700 action F/ext. #955-000-024AV (S36) NA Monarch med./L action #955-000-024AV (S36) NA #947-005-312AV Low (.250") MB 7D42H87 $ 47.59 aligned after tightening. Four, TORX head screws REMINGTON 700 long #955-000-024AV (S36) #955-000-023AV (S35) solidly lock rings to scope. F/ext. #947-000-295AV Low (.250") SIL 7D48P28 $ 53.59 action, 78, 40-XL, 721, 725 SPECS: MIM Steel. Powder coat, Gloss black (Reg) or CHURCHILL Highlander #955-000-024AV (S36) #955-000-023AV (S35) #947-000-296AV Medium (.375") GB 7D48N28 $ 53.59 ab 700 short action, 700 ML #955-000-024AV (S36) #955-000-023AV (S35) Matte black (Mat) in 1" (25.4mm) dia. only. Heights mea- Highlander F/ext. #955-000-024AV (S36) NA #947-005-322AV Medium (.375") MB 7D42F87 $ 47.59 700 LA/SA, 700 ML F/ext. #955-000-024AV (S36) NA sured from top of base to inside bottom of ring. Medium: .460" (11.7mm). CIL 950, 950C #955-000-033AV (S61) #955-000-026AV (S46) #947-000-297AV Medium (.375") SIL 7D48C28 $ 53.59 High: .585" (14.9mm). Sold per set (front and rear) only. SAKO Whitetail Hunter #955-000-033AV (S61) #955-000-033AV (S61) 950, 950C F/extension #955-000-033AV (S61) #955-000-081AV (S402) #947-000-298AV High (.525") gb 7D48L28 $ 53.59 SAUER 200 #955-000-023AV (S35) #955-000-023AV (S35) STOCK # DIA/HEIGHT FINISH PRICE 972-C #955-000-025AV (S45) #955-000-026AV (S46) #947-005-332AV High (.525") MB 7D43F93 $ 48.02 SAVAGE 110, 116, 10, #955-000-033AV (S61) #955-000-026AV (S46) RUGER-BASE QD RINGS NO.1, NO.3, 77/22, MINI-14 & 972-C F/extension #955-000-025AV (S45) #955-000-081AV (S402) #947-005-333AV High (.525") SIL 7D48F28 $ 53.59 MINI-THIRTY, REDHAWK 11, 12 Sauer #955-000-023AV (S35) #955-000-023AV (S35) 34MM MAXIMA TPA RINGS #947-000-050AV 1"/Med Mat 7D81L80 $ 90.79 10 & 110 series F/ #955-000-033AV (S61) #955-000-081AV (S402) 57 #955-000-025AV (S45) #955-000-026AV (S46) #947-000-300AV Low (.250") GB 7D56B40 $ 73.52 #947-000-052AV 1"/High Mat 7D81C80 $ 90.79 extension 57 F/extension #955-000-025AV (S45) #955-000-081AV (S402) #947-000-259AV Low (.250") MB 7D56B56 $ 62.79 RUGER-BASE QD RINGS FOR M77 & M77 MARK II, SUPER SEARS 50, 51 FN action #955-000-025AV (S45) #955-000-026AV (S46) COOEY 71 #955-000-027AV (S47) #955-000-026AV (S46) #947-000-260AV Medium (.375") MB 7D56C56 $ 62.79 REDHAWK 51L NA #955-000-026AV (S46) ENFIELD receiver cut #955-000-024AV (S36) #955-000-023AV (S35) #947-000-261AV High (.525") MB 7D56H56 $ 62.79 #947-000-056AV 1"/Med Mat 7D81E80 $ 90.79 53 #955-000-027AV (S47) #955-000-026AV (S46) down like: SHILEN flat top receiver #955-000-033AV (S61) #955-000-033AV (S61) Remington 721 round receiver #955-000-023AV (S35) #955-000-023AV (S35) Remington 721, F/ #955-000-024AV (S36) NA extension SMITH & WESSON NA #955-000-026AV (S46) Winchester 70 #955-000-027AV (S47) #955-000-026AV (S46) Mauser action 1500, 1600 #955-000-024AV (S36) #955-000-023AV (S35) H&R 300, 301, 330, 370 #955-000-025AV (S45) #955-000-026AV (S46) 1700, 1500, 1600, 1700 #955-000-024AV (S36) NA WARNE pre-1973 F/ext. EUROPEAN DOVETAIL MAXIMA RINGS 300, 301 LA pre-1973 #955-000-025AV (S45) #955-000-081AV (S402) STEVENS 110E #955-000-033AV (S61) #955-000-026AV (S46) STOCK # DIA/HEIGHT FINISH PRICE F/ext. TIKKA flat receiver #955-000-033AV (S61) #955-000-033AV (S61) Fits Tikka, BRNO/CZ 527 & BRNO 19MM BRNO-BASE PERMANENT RINGS 300, 301 long action NA #955-000-026AV (S46) VOERE 2150, 2165, #955-000-025AV (S45) #955-000-026AV (S46) Mauser action Integral Bases #947-000-040AV 1"/Med Matte 7D45A40 $ 50.39 post-1973 Mauser action F/extension #955-000-025AV (S45) #955-000-081AV (S402) #947-000-041AV 1"/High Matte 7D45N40 $ 50.39 300, 301 LA post-1973 NA #955-000-081AV (S402) Vertically split, rings attach directly to WEATHERBY Mark V, #955-000-024AV (S36) #955-000-023AV (S35) the factory integral dovetails on Tikka, BR- F/ext. HERTER’S U-9 round #955-000-024AV (S36) #955-000-023AV (S35) Vanguard NO/CZ 527 and BRNO rifles. TORX screws MAXIMA TIKKA & BRNO QD RINGS - True, QD lock scope, rings and rifle into one solid unit. ab receiver Mark V, Vanguard F/ext #955-000-024AV (S36) NA rings mount directly to the factory integral bases. Mark V 22-250, 224, #955-000-024AV (S36) #955-000-026AV (S46) SPECS: MIM Steel, powder coated black, matte. Height measured from Levers can be easily repositioned so both rest at U-9 round receiver, F/ext. #955-000-024AV (S36) NA top of base to inside bottom of ring: Medium - .425" (8.9mm), High - the same angle. ab J-9 & FN action #955-000-025AV (S45) #955-000-026AV (S46) 30-06 .535 (13.6mm). SPECS: MIM Steel, powder coated black, matte. Height J-9 & FN action, F/ #955-000-025AV (S45) #955-000-081AV (S402) WINCHESTER 70 long #955-000-027AV (S47) #955-000-026AV (S46) STOCK # DIA/HEIGHT FINISH PRICE measured from top of base to inside bottom of ring: extension and short action, H&H Medium - .425" (8.9mm), High - .535 (13.6mm). TIKKA-BASE PERMANENT RINGS HIGH STANDARD Hi- NA #955-000-026AV (S46) mags above #1,896,476 #947-000-035AV 1"/Med Matte 7D47B92 $ 53.19 STOCK # DIA/HEIGHT FINISH PRICE Power 70 long and short NA #955-000-026AV (S46) #947-000-036AV 1"/High Matte 7D47Q92 $ 53.19 TIKKA-BASE QD RINGS HOWA 1500 #955-000-024AV (S36) #955-000-023AV (S35) action, H&H mags above #1,896,476; 70 #947-000-038AV 30mm/High Matte 7D49D72 $ 55.19 #947-000-066AV 1"/Med Matte 7D84E68 $ 93.99 1500, F/extension #955-000-024AV (S36) NA Target, H&H mags up to 16MM BRNO/CZ-BASE PERMANENT RINGS #947-000-069AV 30mm/High Matte 7D99K45 $ 110.39 ITHACA LSA-55, LSA-65 #955-000-033AV (S61) #955-000-033AV (S61) #1,896,476 #947-000-114AV 1"/Med Matte 7D45E40 $ 50.39 19MM BRNO-BASE QD RINGS KNIGHT MK 85 , BK-92, #955-000-033AV (S61) #955-000-033AV (S61) 52 hole spacing same #955-000-026AV (S46) #955-000-026AV (S46)

RIFLE #947-000-115AV 1"/High Matte 7D45P40 $ 50.39 #947-000-071AV 1"/Med Matte 7D81K80 $ 90.79 T-Bolt 670, 770 #955-000-027AV (S47) #955-000-026AV (S46) #947-000-117AV 30mm/Med Matte 7D43C74 $ 52.39 #947-000-072AV 1"/High Matte 7D81F80 $ 90.79 LK-93, Wolverine, Legend, #955-000-025AV (S45) #955-000-025AV (S45) #947-000-118AV 30mm/High Matte 7D47E20 $ 52.39 #947-000-074AV 30mm/High Matte 7D94E76 $ 105.19 Disc — Advise # — Grand Slam Base, 5E11Q38 �������������������������$ 12.89

GUARANTEED. FOREVER.®

PAGE 270 SINCE 1939 Office/Tech: 641-623-5401 WEAVER WEAVER WEAVER WEAVER .22 RIMFIRE / AIRGUN TOP MOUNT RINGS SIDE MOUNT 1" RINGS & BASE QUAD LOCK RINGS TIP-OFF® MOUNT

Now In Stainless Finish, For Bolt & Ejection Four Caps Give Double The Easy-To-Install Rimfire/Airgun Rings With RINGS & BASES Too! Clearance Holding Power Built-In Bases Heights: Low and Me- One-piece rings and Two caps per base provide These 1" dium for scopes w/objec- sub-base mount scope to twice the clamping power. Extension Standard rings have in- tive diameters to approxi- side of receiver to provide 210° coverage provides even clamping pressure that pulls scope tegral bases for mately 1.75"(44.45mm). clearance for bolt handles, into base, prevents scope from rotating when tightening caps. Alu- use on .22 rimfire High for objectives above easier loading and ejection. minum construction keeps weight to a minimum. rifles and airguns 3 1.75". Extra High for scopes with objectives up to 60mm. ab Long and Short ring mounts SPECS: Aluminum, gloss black, matte black, or natural silver finish. Height with /8" (9.5mm) SPECS: Aluminum lower; steel cap, screws, crossbolt and nut. Satin Blue, give correct spacing for from top of base to bottom of ring: Medium - .160" (4mm). High - .328" dovetail receiver grooves. Separate bases not required - it's all right Matte Blue or brushed Stainless finish. Height (above base): 1" diameter compact or large scopes. (8.3mm). Standard and Extension (Ext) rings fit Weaver-style bases. Ex- here! Neat, symmetrical caps with two screws on each side. ab - Low, .090" (2.28mm); Med., .164" (4.16mm); High, .332" (8.43mm); X- Bases accept Weaver Side tension sets include one standard ring and one extension ring. Others SPECS: Base - Aluminum, anodized, black. Cap - Steel, black finish. Ac- Short Shown 3 High, .560" (14.2mm). 30mm diameter - Low, .290" (7.3mm); High, .485" Mount rings ONLY (listed have two standard rings.Tip-Off rings fit /8" grooved .22 rimfire receivers. cepts 1" (2.5cm) scopes. Sold in pairs. (12mm). 2 oz. (56 g). below). ab #955-494-101AV Pro-View Tip-Off Mount, 5E00CLG​ �����$ 16.39 SPECS: Rings - Sub-base, aluminum, anodized, black; steel ring cap, STOCK # STYLE FINISH PRICE STOCK # HEIGHT FINISH SIZE PRICE black. Distance between rings: Long - 3.7" (9.3cm), Short - 1.8" (4.7cm), #955-000-001AV 1" Medium Gloss 5E10N91 $ 12.89 #955-490-001AV Low Satin 1" 5E19K23 $ 22.99 Base - Aluminum, black, anodized finish. #955-000-002AV 1" High Gloss 5E11G71 $ 13.89 #955-490-003AV Low Matte 1" 5E22Q62 $ 27.99 #955-010-103AV 3B Side Mount Base, 5E00HJQ​ �������� $ 14.99 #955-000-003AV 1" High Ext. Gloss 5E13I52 $ 17.99 #955-490-002AV Low Stainless 1" 5E35F09 $ 37.99 #955-493-103AV 1" Short Side Mnt Ring, 5E29N09​ ���� 29.99 #955-000-004AV 1" Medium Matte 5E11G75 $ 13.89 #955-490-201AV Med. Satin 1" 5E20L83 $ 24.99 #955-493-303AV 1" Long Side Mnt Ring, 5E00KNP​ ���� 34.99 #955-000-005AV 1" High Matte 5E11Q94 $ 15.99 WEAVER #955-490-203AV Med. Matte 1" 5E19Q23 $ 23.99 #955-000-006AV 1" High Ext. Matte 5E13L52 $ 17.99 #955-490-111AV Med. Stainless 1" 5E33N46 $ 39.99 #955-000-104AV 1" Medium Silver 5E14F91 $ 15.29 SIDE MOUNT BASES SURE-GRIP RINGS #955-490-301AV High Satin 1" 5E20Q06 $ 23.99 #955-000-105AV 1" High Silver 5E11P24 $ 13.29 Give Uniform High- #955-490-303AV High Matte 1" 5E19N23 $ 22.99 STOCK # RIFLE MODEL #955-000-102AV 1" Tip Off Matte 5E13E91 $ 16.39 Strength Clamping #955-490-302AV High Stainless 1" 5E33K24 $ 39.99 SIDE MOUNT BASES Power #955-490-401AV X-High Satin 1" 5E20L81 $ 24.99 #955-010-001AV ANSCHUTZ 1568 (1) #955-490-403AV X-High Matte 1" 5E20E80 $ 24.99 #955-010-001AV CARCANO military action (1) Steel caps with two #955-491-210AV Low Matte 30mm 5E20G07 $ 22.99 #955-010-001AV CIL 830 & 950, 950C (1) screws per side provide ex- tra strong, 4-screw, clamp- #955-491-200AV High Matte 30mm 5E21I72 $ 25.99 #955-010-002AV COOEY 60, 600 (2) WEAVER WINDAGE ADJUSTABLE ing power. Helps ensure #955-010-001AV Model 71 (1) that reticle stays square TOP MOUNT EXTENSION RINGS SURE-GRIP RINGS #955-010-001AV ENFIELD P 14/17 receiver cut like Remington 30 (1) while tightening top screws. Large clamp nut locks rings to base, - Extension Top Mount Rings, 1" provides easy scope installation, removal; and accurate return to and 30mm diameter. Moves eye #955-010-002AV H&R Models 65, 165, 150, 151, 250, 251, 264, 265, (2) Completely Adjustable, 3 zero after re-installation. ab relief /4", forward or backward. 365, 450, 550, 755, 765, 852 High-Strength Clamping Power SPECS: Aluminum lower; steel cap, screws, crossbolt and nut. Black, Sold by the pair, 1 standard and 1 #955-010-001AV HIGH STANDARD Mauser action (1) gloss or matte finish. Heights (above base): 1" (2.5cm) dia- meter - Med., extension ring or “Dual” style with #955-010-001AV JAPANESE Arisaka 6.5mm & 7.7mm (1) .164" (4.16mm); High, .332" (8.43mm); X-High, .560" (14.2mm). two extension rings. ab High-quality, windage ad- #955-010-002AV KRAG (2) justable rings feature steel caps STOCK # HEIGHT FINISH SIZE PRICE #955-010-002AV MARLIN A1, 50, 39A round barrel, 80, 81, 88, (2) with two hardened screws per STOCK # HEIGHT FINISH SIZE PRICE #955-490-500AV High Satin 1" 5E24I65 $ 28.99 89, 98 side allow super strong clamp- ing power and positive grip on #955-000-007AV Med. Gloss 1" 5E22F58 $ 26.99 #955-490-503AV High Matte 1" 5E23L04 $ 26.99 #955-010-010AV Model 512 Slugmaster, 590 (10M) your scopes. Both front and rear rings come with two fully adjust- #955-000-008AV Med. Matte 1" 5E23A39 $ 23.99 5E26E12 #955-490-610AV Hi-Dual Satin 1" $ 30.99 #955-010-001AV MAUSER Models ZB, HVA Husqvarna w/rec. ring (1) able base clamps that mount securely to Weaver-style rails with a #955-000-009AV High Gloss 1" 5E22A18 $ 28.99 5E26C12 #955-490-450AV Hi-Dual Matte 1" $ 30.99 1.3” dia. unique, one-piece lug milled into the base of each ring. Clamps can #955-000-010AV High Matte 1" 5E00FES $ 24.99 5E27G96 be tightened or loosened for both front and rear alignment so you #955-000-079AV High Matte 30mm $ 31.99 #955-010-002AV MOSSBERG 25, 26, 35, 40, 42, 43, 44, 45, 46, (2) #955-000-011AV X-High Gloss 1" 5E22H18 $ 28.99 46A, 46B, 46M, 140, 142, 144, 146, 468T can line your scope up perfectly with the end of the barrel leaving #955-000-012AV X-High Matte 1" 5E22A18 $ 28.99 #955-010-001AV REMINGTON 7, 30, 700, 40-X, 600, 660, 721, 722 (1) the windage adjustment in your scope for precise sighting-in. ab SPECS: Aluminum lower; steel cap, 4 screws, windage adjustment 700ML LA/SA clamps. Allen wrench included. Black, gloss or matte finish. 1" (2.5cm) #955-010-002AV Mod. 10, 11, 12, 12A, 25, 33, 34, 41, 121, 341, 513S, (2) diameter. Heights measured from top of base to bottom of ring. Med., WEAVER 513T, 514 .180" (.5cm); High, .350" (.8cm); X-High, .575" (1.5cm). #955-010-001AV SAVAGE 20, 110, 111, 112, 116, 340, 342, 840, 842 (1) STOCK # HEIGHT FINISH SIZE PRICE TACTICAL SCOPE RINGS #955-010-002AV Models 3, 4, 5, 6, 7, 19, 23, 40, 45 , 219 (2) #955-000-112AV Med. Matte 1" 5E23A27 $ 27.99 WEAVER SEE-THRU MOUNT RINGS #955-010-001AV SCHULTZ & LARSEN (1) For Ultra-Secure Mounting Of #955-000-114AV High Matte 1" 5E24L37 $ 24.99 Large-Objective Scopes #955-010-001AV SEARS Models 51L, 53 (1) For Weaver Bases #955-000-116AV X-High Matte 1" 5E22K75 $ 26.99 Oversized rings provide ex- #955-010-103AV Model 94 post-’64 (3B) Extra wide, oval design for tra contact area for ultra-secure #955-010-001AV SMITH & WESSON Mauser actions (1) WINDAGE ADJUSTABLE GRAND SLAM RINGS - Strong, all-steel instant use of either iron sights mounting of large optics on hard-recoiling, long-range rifles such #955-010-001AV SPRINGFIELD ‘03 (1) rings clamp securely to Weaver-style rails and two Torx® screws or scope. Standard See-Thru as sniper rifles. Fits all Weaver-style bases. Six no-strip, no-slip Torx® hold your scope rigidly in place. Windage adjustable ring bases or Extension style that adds #955-010-001AV STEVENS 110E, 325, 322 (1) 3 screws hold down the ring cap to ensure the scope keeps its position allow for increased left to right positioning on front and rear align- approximately /4" (19mm) eye #955-010-002AV Models 26, 53, 56, 57, 66, 76, 85, 416, 417, 418, (2) even under heavy recoil. Oversize hex nuts allow quick removal or ment of rings and scopes while leaving the windage adjustment on relief adjustment. Fit Weaver attachment of optics in dynamic situations. ab 762, 872 the scope for accurate fine-tuning at the range. Rings also allow Top Mount Bases. Excellent for SPECS: Aluminum, hardcoat anodized, matte black. Height measured #955-010-001AV STEVENS-SPRINGFIELD 840 (1) for perfect return to zero when remounting scopes. mounting large objective diam- Extension Standard from top of base to underside of scope body. 1" High - .400" high. Ac- #955-010-002AV Models 83, 872 (2) SPECS: Steel, blued, matte finish. 1" (2.5cm) diameter. Heights measured eter scopes, too. ab cepts scopes with objectives up to 44mm dia. 1" Extra High - .525" high. #955-010-001AV WINCHESTER 54, 70 LA/SA, 670, 770 (1) from top of base to bottom of ring. Med., .180" (.5cm); High, .350" (.8cm); SPECS: Steel, satin blue (SB) or matte blue (MB) finish. For 1" (2.5cm) X-High, .575" (1.5cm). Torx wrench included. scopes. Sold in pairs. Accepts objectives up to 50mm dia. 30mm High - .495" high. Accepts #955-010-103AV Model 94 post-’64 (3B) objectives up to 44mm dia. #955-495-100AV See-Thru Rings (SB), 5E20B96​ ���������� $ 24.99 RIFLE #955-010-002AV Models 03, 47, 52, 57, 61, 63, 69, 69A, 72, 74, (2) #955-000-099AV Rings, Medium, 1", Matte Blue, ​ #955-000-138AV 1" Tactical Rings, High, 5E30K89​ ������ $ 36.99 75, 77 5E00MGP �����������������������������������������������$ 32.99 #955-495-230AV See-Thru Rings (MB), 5E20K07​ �������� 23.99 #955-000-139AV 1" Tactical Rings, Extra-High, ​ #955-010-002AV Model 42 pump shotgun (2) #955-000-100AV Rings, High, 1", Matte Blue, ​ #955-495-500AV Ext. See-Thru Rings (SB), ​ 5E00BGH ����������������������������������������������� 34.99 5E00DJN ������������������������������������������������� 30.99 5E25G05 ������������������������������������������������ 29.99 #955-010-002AV ZB 22 (2) #955-000-140AV 30mm Tactical Rings, High, ​ #955-000-101AV Rings, X-High, 1", Matte Blue, #955-495-101AV Ext. See-Thru Rings (MB), 5E00KAM ������������������������������������������������ 38.99 — Advise # — 1, 2, 10M Base, 5E14J23 �������������������������������$ 14.59 5E00HEQ ����������������������������������������������� 29.99 5E26J25​ �������������������������������������������������� 30.99

order on the web

Orders: 800-741-0015 brownells.com PAGE 271 WEAVER TOP MOUNT BASES One- & Two-Piece Bases For RIFLE MODEL STK# REAR STK# FRONT STK# 1-PC/SET RIFLE MODEL STK# REAR STK# FRONT STK# 1-PC/SET RIFLE MODEL STK# REAR STK# FRONT STK# 1-PC/SET Rifles, Shotguns, Handguns Monarch, CF2 #955-010-036AV (36) #955-010-035AV(35) #955-000-117AV (36M, 35M)* Topper 30, 22 Jet, NA NA #955-010-060AV (60A) MAUSER Lightweight aluminum long action #955-010-136AV (36M) #955-010-135AV (35M) #955-000-118AV (36S, 35S)* 158 before 1973 Bauer 3000, #955-010-068AV (68) #955-010-046AV(46) NA bases fit a wide range of mod- Medium action NA NA #955-010-097AV (97) Topper 155, 157, NA NA #955-010-082AV (82) 4000 ern and older rifles, plus shotguns and long range handguns. Sold one-piece base 158C after 1973 Bauer F/ext #955-010-068AV (68) #955-010-402AV(402) NA each; order front and rear base. One piece bases and base pair sets Long action one- NA NA #955-010-098AV (98) 700 NA NA #955-010-087AV (87) FN, HVA, Model #955-010-045AV (45) #955-010-046AV(46) #955-000-121AV (45M, 46M)* available for some models. Base pair sets are marked with * or **. ab piece base 755, 765, 852, #955-010-017AV (17) #955-010-021AV (21) NA 95, 98 large ring SPECS: Aluminum, polished blue finish except Matte (M), Silver (S). Exten- Other high #955-010-028AV (28) #955-010-028AV(28) NA sion bases: Front (F), Rear (R). Fits Top Mount and See- Thru Mount Rings. 865 FN, HVA, 95, 98 #955-010-045AV (45) #955-010-402AV(402) NA powers 800 #955-010-012AV (12) #955-010-012AV (12) NA large ring F/ext RIFLE MODEL STK# REAR STK# FRONT STK# 1-PC/SET CHARLES DALY RINGS & BASES 980 Ultra, 232C #955-010-019AV (19) #955-010-019AV(19) NA Swedish 96, HVA, #955-010-055AV (55) #955-010-046AV(46) NA ANSCHUTZ Mini Mauser #955-010-023AV (23) #955-011-071AV (71A) NA 10 Gauge small ring Mark 12 #955-010-016AV (16) #955-010-016AV(16) NA 98 #955-010-055AV (55) #955-010-035AV(35) NA HENRY Swede 96, HVA #955-010-055AV (55) NA NA 54, 54MS, 64, #955-010-091AV (91) #955-010-091AV(91) NA CIL H009 (.30-30) & NA NA #955-010-063AV (63B) small ring F/ext 64ms, 164, 1413, 871 #955-010-062AV (62) NA NA H010 (.45-70) Mark X #955-010-055AV (55) #955-010-020AV(20A) NA 1422, 1424, 1430, 900 #955-010-019AV (19) #955-010-019AV(19) NA HERTERS Mini-Mark X #955-010-023AV (23) #955-011-071AV (71A) NA 1432, 1433, 1434, 950, 950C #955-010-061AV (61) #955-010-046AV(46) #955-000-122AV (61M, 46M)* 1522, 1530, 1532, U9 BSA dovetail #955-010-028AV (28) #955-010-028AV(28) NA MOSSBERG 1534 #955-010-161AV (61M) #955-010-146AV(46M) NA action 25, 26, 42, 46M, #955-010-012AV (12) NA NA 153 Deluxe #955-010-019AV (19) #955-010-019AV(19) NA 972-C #955-010-045AV (45) #955-010-046AV(46) #955-000-121AV (45M, 46M)* U-9 round #955-010-036AV (36) #955-010-035AV(35) NA 140, 142, 146, receiver also 45, 46 w/ 1568 #955-010-061AV (61) #955-010-146AV(46M) NA COLT #955-010-136AV (36M) #955-010-135AV (35M) NA 3/4" dia. bbls. #955-010-046AV (46) NA NA Coltsman SA #955-010-025AV (25) #955-010-025AV(25) NA J-9 FN action #955-010-045AV (45) #955-010-046AV(46) #955-000-121AV (45M, 46M)* round receiver 25, 26, 42, 46M, NA #955-010-013AV (13) NA #955-010-161AV (61M) NA NA HIGH STANDARD Coltsman LA #955-010-054AV (54) #955-010-054AV(54) #955-000-127AV (54M, 54M)* 140, 142, 146, AUSTIN & HALLECK High-Power #955-010-055AV (55) #955-010-046AV(46) NA round receiver also 45, 46 w/ 420 (inline M/L) #955-010-085AV (85) #955-010-085AV(85) NA High-Power F/ #955-010-055AV (55) #955-010-040AV(40A) NA Sauer #955-010-035AV (35) #955-010-035AV(35) NA extension 3⁄4" dia. bbls. BENELLI #955-010-135AV (35M) #955-010-135AV (35M) NA HOWA 40 #955-010-016AV (16) #955-010-021AV (21) NA Super Blk Eagle, NA NA #955-010-093AV (93) Sauer, F/R/ #955-010-040AV (40A) #955-010-040AV(40A) NA 43, 44, 144, 468T, #955-010-012AV (12) #955-010-016AV(16) NA S. Blk Eagle II 1500 #955-010-036AV (36) #955-010-035AV(35) #955-000-117AV (36M, 35M)* extension #955-010-041AV (40A-M)#955-010-041AV(40A-M) NA 35. Also models Nova NA NA #955-010-004AV (423M) #955-010-136AV (36M) #955-010-135AV (35M) #955-000-118AV (36S, 35S)* 57 #955-010-045AV (45) #955-010-046AV(46) #955-000-121AV (45M, 46M)* 45, 46, 46A, BROWNING 1500, F/extension#955-010-036AV (36) #955-010-040AV(40A) NA COOEY #955-010-136AV (36M) #955-010-041AV(40A-M) NA 46B w/ 13/16" A-Bolt after 1996, #955-010-047AV (47) #955-010-084AV(84) NA dia. bbls. 71 #955-010-047AV (47) #955-010-046AV(46) #955-000-125AV (47M, 46M)* ITHACA except WSSM 50, 51, 151, 152, #955-010-012AV (12) NA NA #955-010-147AV (47M) #955-010-146AV(46M) NA LSA-55, LSA-65 #955-010-061AV (61) #955-010-061AV(61) NA A-Bolt, A-Bolt 22 #955-010-047AV (47) #955-010-047AV(47) NA 350, 352 CVA #955-010-161AV (61M) #955-010-161AV (61M) NA before 1996 #955-010-147AV (47M) #955-010-147AV (47M) NA 43, 44, 144, 468T, NA #955-010-012AV (12) NA Round Receiver #955-010-418AV (418M) #955-010-418AV(418M) NA JAPANESE A-Bolt WSSM, #955-000-092AV (427) #955-010-047AV(47) NA 35. Also models ENFIELD receiver cut down like: Arisaka 6.5mm, NA NA #955-010-070AV (70) .204 & .223 45, 46, 46A, 7.7mm A-Bolt European #955-010-085AV (85) #955-010-085AV(85) NA Remington 30 #955-010-011AV (11) #955-010-011AV (11) NA 46B w/ 13/16" model Remington 721 #955-010-036AV (36) #955-010-035AV(35) NA KIMBER dia. bbls. A-Bolt Shotgun #955-010-147AV (47M) #955-010-419AV(419M) NA #955-010-136AV (36M) #955-010-135AV (35M) NA Win 70 style #955-010-049AV (49A) #955-010-046AV(46) NA 400 #955-010-020AV (20A) #955-010-042AV(42) NA BBR FN Mauser #955-010-045AV (45) #955-010-046AV(46) NA Remington 721 #955-010-036AV (36) #955-010-040AV(40A) NA 82 NA NA #955-010-083AV (83) 500A, 600 NA NA #955-010-088AV (88) action NA #955-000-121AV (45M, NA F/ext. #955-010-136AV (36M) #955-010-041AV(40A-M) NA 82C #955-010-054AV (54) #955-010-054AV(54) NA shotguns before 46M)* Winchester 70 #955-010-047AV (47) #955-010-046AV(46) #955-000-125AV (47M, 46M)* KNIGHT 1997 BBR F/extension #955-010-045AV (45) #955-010-402AV(402) NA #955-010-147AV (47M) #955-010-146AV(46M) NA MK 85 Muzzle- #955-010-061AV (61) #955-010-061AV(61) NA 500 after 1997, NA NA #955-000-084AV (417M) BBR long & short #955-010-047AV (47) #955-010-046AV(46) #955-000-125AV (47M, 46M)* Winchester 70 #955-010-047AV (47) #955-010-402AV(402) NA loader #955-010-161AV (61M) #955-010-161AV (61M) NA 835 shotguns NA NA #955-000-132AV (500M, 500M)** action #955-010-147AV (47M) #955-010-146AV(46M) NA F/ext. #955-010-147AV (47M) NA NA LK-93, Wolverine, #955-010-045AV (45) #955-010-045AV(45) NA 640 NA NA #955-010-063AV (63B) BBR F/extension #955-010-047AV (47) NA NA GARCIA Legend NA NA #955-010-091AV (63B-S) #955-010-147AV (47M) NA NA 73 NA NA #955-010-053AV (53) LONE EAGLE 680, 695, 800 #955-010-055AV (55) #955-010-055AV(55) NA BAR, BAR II, Mark #955-010-054AV (54) #955-010-054AV(54) NA H&R SSP 91 Pistol #955-010-016AV (16) #955-010-016AV(16) NA 810, RM7 #955-010-025AV (25) #955-010-011AV (11) NA II, semi-auto NA #955-000-127AV(54M, NA 65, 165, 150, 151 #955-010-018AV (18) #955-010-018AV(18) NA MARLIN 1500, 1550, 1700 #955-010-036AV (36) #955-010-035AV(35) #955-000-117AV (36M, 35M)* 54M)* semi-auto 9, 36, 45, 62, 93, NA NA #955-010-063AV (63B) #955-010-136AV (36M) #955-010-135AV (35M) #955-000-118AV (36S, 35S)* BLR #955-010-025AV (25) #955-010-025AV(25) NA 176 NA NA #955-010-083AV (83) 336, 375, 444, NA NA #955-000-091AV (63B-S) 1500, 1550, 1700, #955-010-036AV (36) #955-010-040AV(40A) NA 1893, 1894, 1895, BLR flat top #955-010-028AV (28) #955-010-028AV(28) NA 250, 251, 264, #955-010-018AV (18) #955-010-016AV(16) NA NA NA #955-000-128AV (336M, F/extension #955-010-136AV (36M) #955-010-041AV(40A-M) NA Camp 9 Carbine, 336M)* receiver 265, 365, 450, MUSGRAVE 922M, 989, T-Bolt (new #955-010-015AV (15) #955-010-015AV (15) NA 550 Mark I, Mark II #955-010-054AV (54) #955-010-046AV(46) NA model) Glenfield 30 300, 301, 330, #955-010-045AV (45) #955-010-046AV(46) #955-000-121AV (45M, 46M)* Mark I, II F/ #955-010-054AV (54) #955-010-402AV(402) NA A-1, 50 #955-010-015AV (15) #955-010-015AV (15) NA 1885 Hi Wall NA #955-010-011AV (11) NA 370 before 1973 extension octagon barrel MR7 #955-010-047AV (47) #955-010-046AV(46) #955-000-125AV (47M, 46M)* NA #955-010-029AV(29) NA 300, 301 pre #955-010-045AV (45) #955-010-402AV(402) NA Mark III, Mark IV #955-010-045AV (45) #955-010-046AV(46) #955-000-121AV (45M, 46M)* 1973, F/extension #955-010-147AV (47M) #955-010-146AV(46M) NA 22 Auto base NA NA #955-010-060AV (60A) Mark III, IV, F/ #955-010-045AV (45) #955-010-402AV(402) NA MR-7 F/extension#955-010-047AV (47) #955-010-402AV(402) NA attaches to barrel 300, 301 short #955-010-083AV (83) #955-010-084AV(84) NA extension extends over action post 1973 #955-010-147AV (47M) NA NA #955-010-054AV (54) #955-010-046AV(46) NA NEW ENGLAND FIREARMS receiver. Norinco 39A #955-010-090AV (90) #955-010-016AV(16) NA 300, 301 post #955-010-054AV (54) #955-010-402AV(402) NA Handy Rifle NA NA #955-010-045AV (45) clones. 1973, F/extension #955-010-029AV (29) NA NA 10 gauge shotgun#955-010-019AV (19) #955-010-019AV(19) NA 52 #955-010-085AV (85) #955-010-085AV(85) NA 317, 322 #955-010-011AV (11) #955-010-035AV(35) NA 455 #955-010-045AV (45) #955-010-046AV(46) #955-000-121AV (45M, 46M)* PARKER HALE BSA 317, 322, F/ #955-010-011AV (11) #955-010-040AV(40A) NA 455, F/extension #955-010-045AV (45) #955-010-402AV(402) NA 1000, 1000C, #955-010-045AV (45) #955-010-046AV(46) #955-000-121AV (45M, 46M)*

RIFLE Monarch med./L #955-010-036AV (36) #955-010-040AV(40A) NA extension 57 Magnum NA NA #955-010-058AV (58) 1100, 1200, 1700 action, F/ext. #955-010-136AV (36M) #955-010-041AV(40A-M) NA 360, 361 NA NA #955-010-081AV (81) 88, 89, 98, 917 #955-010-018AV (18) #955-010-018AV(18) NA 1000, 1100, 1200, #955-010-045AV (45) #955-010-402AV(402) NA BSA continued next column H&R continued next column 80, 81, 980 #955-010-012AV (12) #955-010-012AV (12) NA 1700, F/ext

GUARANTEED. FOREVER.®

PAGE 272 SINCE 1939 Office/Tech: 641-623-5401 RIFLE MODEL STK# REAR STK# FRONT STK# 1-PC/SET RIFLE MODEL STK# REAR STK# FRONT STK# 1-PC/SET RIFLE MODEL STK# REAR STK# FRONT STK# 1-PC/SET RIFLE MODEL STK# REAR STK# FRONT STK# 1-PC/SET REMINGTON SAUER 57, 76, 417-1⁄2, 762 #955-010-012AV (12) #955-010-012AV (12) NA 70 Target, H&H #955-010-049AV (49A) #955-010-046AV(46) NA RINGS & BASES 700, 78, 40-XL, #955-010-036AV (36) #955-010-035AV(35) #955-000-117AV (36M, 35M)* 200 #955-010-035AV (35) #955-010-035AV(35) NA 110E #955-010-061AV (61) #955-010-046AV(46) NA mags up to 721, 722, 725, #955-010-136AV (36M) #955-010-135AV (35M) #955-000-118AV (36S, 35S)* #955-010-135AV (35M) #955-010-135AV (35M) NA #955-010-161AV (61M) #955-010-146AV(46M) NA #1,896,476 700ML, LA/SA 200 F/R/ #955-010-040AV (40A) #955-010-040AV(40A) NA 416 #955-010-018AV (18) #955-010-017AV (17) NA 70 Target up to #955-010-049AV (49A) #955-010-402AV(402) NA 700, 78, 40-XL, #955-010-036AV (36) #955-010-040AV(40A) NA Extension #955-010-041AV (40A-M)#955-010-041AV(40A-M) NA 417 #955-010-015AV (15) #955-010-015AV (15) NA #1,896,476 F/ext 721, 722, 725, #955-010-136AV (36M) #955-010-041AV(40A-M) NA SHR 970 #955-010-025AV (25) #955-010-025AV(25) NA 418, 418-½ #955-010-016AV (16) #955-010-016AV(16) NA 70 WSSM #955-000-094AV (428) #955-010-046AV(46) NA 700ML, LA/SA, F/ SAVAGE STEVENS-SPRINGFIELD 03, 63 #955-010-019AV (19) #955-010-022AV(22) NA extension 99, 1895, 1899 #955-010-014AV (14) #955-010-019AV(19) NA 83 #955-010-016AV (16) #955-010-021AV (21) NA 05, 07, 10, 95 #955-010-020AV (20A) #955-010-017AV (17) NA 700, 78, 40-XS NA NA #955-010-097AV (97) 110 through 116 NA NA #955-010-413AV (413) 85, 87, 872 #955-010-012AV (12) #955-010-012AV (12) NA 06, 62, 62A, 90 #955-010-032AV (32) #955-010-032AV(32) NA short action 110, 111, 116, 10, #955-010-061AV (61) #955-010-046AV(46) #955-000-122AV (61M, 46M)* THOMPSON CENTER Octagon barrel one-piece 11, 16 #955-010-161AV (61M) #955-010-146AV(46M) NA TCR rifle NA NA #955-010-405AV (405) 43 #955-010-018AV (18) #955-010-018AV(18) NA 788 #955-010-076AV (76) #955-010-075AV (75) NA 110, 116, 10, 16 #955-010-061AV (61) #955-010-402AV(402) NA Contender hand- NA NA #955-010-092AV (92A) 47, 69A, 72 #955-010-012AV (12) #955-010-017AV (17) NA 7 new model #955-010-006AV (421M) #955-010-135AV (35M) NA F/Ext. #955-010-161AV (61M) NA NA gun & carbine NA NA #955-000-090AV (92A-S) 52 hole spacing #955-010-025AV (25) #955-010-057AV (57) NA w/4-hole receiver 10-16, 110-116, #955-010-146AV (46M) #955-010-046AV(46) #955-000-123AV (46M, 46M)* Encore handgun NA NA #955-010-410AV (410) different 7 new model F/ #955-010-006AV (421M) #955-010-041AV(40A-M) NA w/AccuTrigger, #955-012-046AV (46) #955-010-146AV(46M) #955-000-124AV (46S, 46S)* & carbine 52 hole spacing #955-010-046AV (46) #955-010-046AV(46) #955-000-123AV (46M, 46M)* ext., 673 Stevens 200 NA #955-012-046AV(46) NA Omega Muzzle- NA NA #955-010-410AV (410) same #955-010-146AV (46M) #955-010-146AV(46M) #955-000-124AV (46S, 46S)* 7, 600, 660, XP- NA NA #955-010-070AV (70) 3 #955-010-016AV (16) #955-010-021AV (21) NA loader #955-012-046AV (46) #955-012-046AV(46) NA 100 single shot 4, 5 #955-010-012AV (12) #955-010-013AV (13) NA Scout rifle & NA NA #955-010-404AV (404) 52C #955-010-085AV (85) #955-010-085AV(85) NA (3-hole) pistol 57, 69 #955-010-012AV (12) #955-010-013AV (13) NA 4, 6, 74, 76, 7400, NA NA #955-010-093AV (93) 6, 7 #955-010-012AV (12) #955-010-012AV (12) NA System 1 & Blk NA NA #955-010-411AV (411) 60, 67, 68 #955-010-021AV (21) #955-010-021AV (21) NA 7600, 7615 19, 23 #955-010-015AV (15) #955-010-016AV(16) NA Diamond 2 per 61 round barrel #955-010-019AV (19) #955-010-013AV (13) NA 740, 742, 760 NA NA #955-010-062AV (62) 24, 24V NA NA #955-010-074AV (74) 29 round barrel #955-010-011AV (11) #955-010-022AV(22) NA package 61 octagon barrel #955-010-025AV (25) #955-010-032AV(32) NA NA NA #955-000-129AV (602M, Thunderhawk, NA NA #955-010-406AV (406) 74 #955-010-012AV (12) #955-010-012AV (12) NA 601M)* 40, 45 #955-010-011AV (11) #955-010-011AV (11) NA Firehawk 2 per 75 Sporter #955-010-015AV (15) #955-010-030AV(30) NA 10, 11, 12, 34, 341, #955-010-043AV (43) #955-010-042AV(42) NA 67 NA NA #955-010-093AV (93) package 75 Target #955-010-015AV (15) #955-010-016AV(16) NA 510, 512, 521T 93 #955-010-016AV (16) #955-010-016AV(16) NA TIKKA 77 #955-010-015AV (15) #955-010-032AV(32) NA 12A, 121 w/ 3/4" #955-010-018AV (18) #955-010-013AV (13) NA 170 NA NA #955-010-062AV (62) Flat receiver #955-010-061AV (61) #955-010-061AV(61) NA dia. barrels 219 #955-010-012AV (12) #955-010-030AV(30) NA 88, 100 NA NA #955-010-053AV (53) TRADITIONS Genesis Muzzle- #955-010-418AV (418M) #955-010-418AV(418M) NA SCHULTZ & LARSEN 94 Big Bore Angle #955-010-095AV (95) #955-010-403AV(403) NA Whitetail Hunter #955-010-161AV (61M) #955-010-161AV (61M) NA loader #955-010-054AV (54) #955-010-046AV(46) NA Eject In-Line Buck #955-010-075AV (75) #955-010-075AV (75) NA 121 w/ 13/16" dia. #955-010-018AV (18) NA NA SEARS 94 Angle Eject #955-010-095AV (95) #955-010-094AV(94) #955-000-131AV (95M, 94M)* Hunter except earliest barrel #955-010-017AV (17) NA NA 50, 51 FN Action #955-010-045AV (45) #955-010-046AV(46) #955-000-121AV (45M, 46M)* VOERE 670, 770 #955-010-047AV (47) #955-010-046AV(46) #955-000-125AV (47M, 46M)* 14, 141 #955-010-020AV (20A) #955-010-027AV(27) NA 50, 51 F/ #955-010-045AV (45) #955-010-402AV(402) NA 2150, 2165, #955-010-045AV (45) #955-010-046AV(46) #955-000-121AV (45M, 46M)* #955-010-147AV (47M) #955-010-146AV(46M) NA 24, 241 NA NA #955-010-060AV (60A) Extension Mauser action 670, 770 F/ext. #955-010-047AV (47) #955-010-402AV(402) NA 25 #955-010-018AV (18) #955-010-021AV (21) NA 51L #955-010-055AV (55) #955-010-046AV(46) NA 2130 #955-010-028AV (28) #955-010-028AV(28) NA #955-010-147AV (47M) NA NA 30, 720 #955-010-011AV (11) #955-010-011AV (11) NA 53 #955-010-047AV (47) #955-010-046AV(46) #955-000-125AV (47M, 46M)* WEATHERBY 1300 Shotgun NA NA #955-010-425AV (416M)(54) 33 #955-010-017AV (17) #955-010-013AV (13) NA #955-010-147AV (47M) #955-010-146AV(46M) NA Mark V Magnum #955-010-034AV (424M) #955-010-135AV (35M) NA Super X Rifle #955-010-054AV (54) #955-010-054AV(54) #955-000-127AV (54M, 54M)* 41 #955-010-017AV (17) #955-010-017AV (17) NA 53 F/Extension #955-010-047AV (47) #955-010-402AV(402) NA Vanguard 22-250, #955-010-036AV (36) #955-010-035AV(35) #955-000-118AV (36S, 35S)* Small ring Mauser #955-010-055AV (55) #955-010-046AV(46) NA 513S, 513T #955-010-043AV (43) NA NA #955-010-147AV (47M) NA NA 224, 30-06 #955-010-136AV (36M) #955-010-135AV (35M) NA action 514 #955-010-016AV (16) #955-010-021AV (21) NA SHILEN Vanguard F/ #955-010-036AV (36) #955-010-040AV(40A) NA ZB 514 if not drilled #955-010-012AV (12) #955-010-012AV (12) NA Flat top receiver #955-010-061AV (61) #955-010-061AV(61) NA extension #955-010-136AV (36M) #955-010-041AV(40A-M) NA 22 NA #955-010-028AV(28) NA & tapped, 550 #955-010-161AV (61M) #955-010-161AV (61M) NA Others with FN #955-010-045AV (45) #955-010-046AV(46) #955-000-121AV (45M, 46M)* NA #955-010-024AV(24) NA 541S, 541T #955-010-015AV (15) #955-010-015AV (15) NA Round receiver #955-010-035AV (35) #955-010-035AV(35) NA Mauser actions 597 NA NA #955-010-414AV (414M) #955-010-135AV (35M) #955-010-135AV (35M) NA Lightweight U.S. #955-010-036AV (36) #955-010-416AV(415M) NA NA NA #955-010-424AV (414S) SHOTGUN WEAVER TOP MOUNT BASE PRICES made actions #955-010-136AV (36M) NA NA Shotgun (all #955-000-133AV (429M) NA NA Double & single NA NA #955-010-050AV (50) — Advise # — 11, 12, 13, 17, 21, 22, 23, 24, 28, 29, 30, 42, 43, 44, 71A, 84, 91, WESTERN FIELD drilled & tapped barrel w/rib thick 402, 402M Base, 5E5J26 ������������������������������������������������������������������� $ 5.39 730 #955-010-025AV (25) NA NA models) enough for base — Advise # — 14, 27, 32 Base, 5E00HXS ������������������������������������������������������������������� 6.79 WESTERNFIELD ROSSI screws — Advise # — 15, 16, 18, 19, 20A, 25, 35, 35M, 35S, 36, 36M, 40A, 40A-M, 45, 730 #955-010-011AV (11) NA NA Single Shot NA NA #955-010-092AV (92A) SMITH & WESSON 46, 46M, 46S, 47, 47M, 54, 55, 61, 61M, 68, 75, 76, 79, 83, 85, 419M, 421M, 424, 424M, 427, 428 Base, 5E4J99 ������������������������� 5.99 Firearms Mauser Action #955-010-055AV (55) #955-010-046AV(46) NA 740 NA NA #955-010-063AV (63B) — Advise # — 49A, 50, 53, 57, 58, 59, 62, 63B 74, 86, 87, 88, 93, 94, 95, 403, RUGER® 1500, 1600, 1700 #955-010-036AV (36) #955-010-035AV(35) #955-000-117AV (36M, 35M)* NA NA #955-010-091AV (63B-S) 414S Base, 5E6Q32 ����������������������������������������������������������������������������� 7.49 10//22® NA NA #955-000-130AV (504M, #955-010-136AV (36M) #955-010-135AV (35M) NA 770 #955-010-055AV (55) #955-010-020AV(20A) NA — Advise # — 60A Base, 5E9C32 ������������������������������������������������������������������������������� 10.99 503M)* 1500, 1550, 1700 NA NA #955-000-118AV (36S, 35S)* 775, 780 #955-010-055AV (55) #955-010-055AV(55) NA — Advise # — 70, 92A Base, 5E7Q98 ����������������������������������������������������������������������� 9.39 No. 3 #955-010-085AV (85) #955-010-086AV(86) NA 1500, 1600, 1700 #955-010-036AV (36) #955-010-040AV(40A) NA WINCHESTER — Advise # — 81, 82, 90, Base, 5E8F57 ��������������������������������������������������������������������� 10.09 77 round top #955-010-079AV (79) NA NA F/Ext. #955-010-136AV (36M) #955-010-041AV(40A-M) NA 70 long and #955-010-047AV (47) #955-010-146AV(46M) #955-000-125AV (47M, 46M)* short action, — Advise # — 96, 97, 98, 413 Base, 5E14F42 ����������������������������������������������������������� 16.49 #955-010-035AV (35) NA NA SPRINGFIELD #955-010-147AV (47M) NA NA H&H mags above — Advise # — 63B-S, 404, 405 Base, 5E8D50 ��������������������������������������������������������� 9.99 44 Magnum Deer #955-010-047AV (47) #955-010-068AV(68) NA ‘03 #955-010-054AV (54) #955-010-055AV(55) NA #1,896,476 — Advise # — 406, 411, 418M Base, 5E6L53 ����������������������������������������������������������� 7.69 Stalker 03-A3 #955-010-059AV (59) #955-010-045AV(45) NA — Advise # — 410 Base, 5E11L19 ������������������������������������������������������������������������������� 13.19 70 LA/SA above #955-010-047AV (47) #955-010-402AV(402) NA RIFLE SAKO STEVENS #1,896,476 F/ext — Advise # — 414M Base, 5E7Q99 ��������������������������������������������������������������������������� 8.99 Finnwolf NA NA #955-010-053AV (53) 26 #955-010-022AV (22) #955-010-022AV(22) NA Whitetail Hunter #955-010-061AV (61) #955-010-061AV(61) NA 70 long action NA NA #955-010-096AV (96) — Advise # — 416M, 417M, 423M Base, 5E8A99 ��������������������������������������������������� 9.99 53 #955-010-016AV (16) #955-010-021AV (21) NA and H&H mags #955-010-161AV (61M) #955-010-161AV (61M) NA — Advise # — 429M Base, 5E7N40 ��������������������������������������������������������������������������� 7.59 56, 66 #955-010-012AV (12) #955-010-013AV (13) NA above #1,896,426 72, 75, 78 #955-010-085AV (85) #955-010-085AV(85) NA — Advise # — *2-Piece Base Set, 5E5J92 ����������������������������������������������������������������� 7.19 STEVENS continued next column WINCHESTER continued next column — Advise # — **2-Piece Base Set, 5E7C89 ������������������������������������������������������������� 8.09

order on the web

Orders: 800-741-0015 brownells.com PAGE 273 WEAVER JP ENTERPRISES AR-15/M16 ATLAS METAL PRODUCTS EGW PICATINNY EXTRUSION SEE-THRU MOUNTS 45° OFFSET ADAPTER PICATINNY BASE STOCK Build Custom Scope Bases; Saves Time & Money Integral Mount Lets You Accepts Tactical Sights & Micro- Create Custom Use Both Iron Sight & Scope Red Dots For Fast Targeting Accessory & Optics Picatinny cross-section aluminum rail stock gives you Machined aluminum mount al- Bases For Tactical & Wide oval opening below Sporting Applications a head start on building cus- the scope allows fast, un- lows simple, no-gunsmith mounting tom scope bases. Pre-contoured, so you need only cut to required restricted use of iron sights of iron or micro red dot sights at a 45° Six inch and twelve inch long, aluminum stock has a wide, flat length, mill cross-slots, radius the underside (if needed), and drill when you’re too close to use position in line with your rifle’s bore. Helps improve your short- base that lets you create unique mounts to fit any application. Pre- mounting holes. Much easier than machining from scratch from a scope. All-steel, four screw range speed-shooting without changing your optics. The offset cision machined cross slots accept Picatinny-spec optical sights, bar stock. Perfect for installations that require special ring position- top strap gives 210° surface position keeps your tactical sights from interfering with your main night vision devices and other accessories, plus Picatinny and sepa- ing. Place cross-slots only where you need them; dovetail contour contact for recoil-proof optic but keeps them easily accessible by simply tilting your rifle to rate, Weaver-style rings for scope mounting. ab accepts Picatinny or Weaver-style rings. Channel down the center RINGS & BASES strength. Integral aluminum the side without changing your head position. Mount attaches easily SPECS: 6061 aluminum, black anodized. .394" (10mm) slot spacing. 5.7" keeps weight to a minimum without compromising rigidity. ab to all Picatinny rails on rifle receiver or handguard. Fully reversible 5 base means lighter weight. Front and rear mounts interchange for (14.2cm) or 12" (30.4cm) long. 1" (2.5cm) wide, /8" (16mm) high base. SPECS: 6061 T6 aluminum. 24" (61cm) long, .655" height. for right- or left-handed shooters. ab greater eye relief. ab #100-000-682AV 5.7" Picatinny Base Stock, 7K27M24​ �����$ 29.99 #296-000-098AV Picatinny Extrusion, 6B17F39​ �������������� $ 18.00 SPECS: Aluminum lower half, steel top straps and screws. Satin blue finish. SPECS: 6061 aluminum, hard anodized coating, black. 1¼" (3.1cm) long, #100-000-804AV 12" Picatinny Base Stock, 7K54J94​ ������� 58.99 1" (2.5cm) I.D. Overall height approx. 2" (5.1cm). 3 oz. (85 g) wt. per pair. .1¾" (4.4 cm) wide. 7.7 oz. (209g) wt. Fits MIL-STD 1913 Picatinny rails only. #100-008-905AV JP 45° Offset Adapter, 2E54F04​ ������ $ 56.95 STOCK # FITS PRICE POWER CUSTOM #955-401-713AV Marlin 336 5E00PBM $ 20.99 5E00CNG STEEL SHIM STOCK BLANK SCOPE RING BASE STOCK #955-401-714AV Rem. 4, 6, 7400, 7600 $ 20.99 SAMSON MANUFACTURING CORP. Solves Most “Need A Little More Metal” Weaver-Style Or Picatinny Profile; Ready To QUICK-FLIP MOUNT FOR AIM- Problems Machine For Custom Installations POINT 3XMAG For scope base adjustment, sight adjust- Blank aluminum stock has a milled center ment, head-space adjustment and check- channel for lighter weight without reducing Weaver SCOPE BASE SHIMS Flips Magnifier Aside For Instant Transition ing, restoration of misaligned parts oldering strength. Just cut to required length, mill the From Long-Range To Close-Range Targeting on for buildup, inletting templates, spacers. cross slots, radius the underside (if needed) You name it, and somewhere along the line a Achieve Perfect Scope Base & Ring and drill the mounting holes. Plenty of thick- Quick-transition mount combines secure, shim can be used for everything from shim- ness allows machining to fit most revolver Alignment ming, to measuring, to fixing! ab top straps and receivers. Available in Weaver correct-height attachment of an Aimpoint 3XMag behind a com- Picatinny 1 or Picatinny profiles. ab Three thicknesses down to an incred- patible red dot sight with a spring-loaded mechanism that flips the KIT NO. AC-24 - consists of one piece, each, steel shim stock, 2 /2" magnifier aside for instant return to unmagnified operation of sight. x 6" in the following thicknesses: .001" .002" .003" .005" .010" .015" SPECS: 6061 T6 aluminum, unfinished. Available in 9" (22.8cm), or 18" ible .001", so front-to-rear base heights 9 COMPONENTS Lets you shift from long-range to short-range targeting almost in- #080-544-024AV AC-24 Steel Shim Stk Kit, 8K15A38​ �����$ 19.99 (45.7cm) lengths. Weaver - /16" (14.3mm) thick, 6.1 oz. (173g) or 12.3 oz. (348g) can be made absolutely perfect. ab 5 weight. Picatinny - /8" (1.59cm) thick. 6.5 oz. (184g) or 13 oz. (368g) weight.

FITTING & CUSTOM stantly. Securely installed to any MIL-STD 1913 Picatinny receiver rail SPECS: Steel. All are .625" (15.9mm) wide. KIT NO. AF-12 - consists of one piece, each, steel shim stock, 6" x with a robust locking bar and bolt system, so the magnifier stays cor- #713-065-009AV 9" Weaver Scope Ring Base Stock, ​ Package contains 7 shims: (4) .010" (.254mm); 12" in the following thicknesses: .001" .0015" .002" .003" .004" .005" rectly positioned behind the sight. Mount bolts directly to the factory 3A12J48 ������������������������������������������������������� $ 13.59 (1) .005" (.127mm); and (2) .001" (.0254mm) .006" .007" .008" .010" .012" .015" holes in the bottom of the 3XMag (machine screws included)—no #713-065-018AV 18" Weaver Scope Ring Base Stock, ​ thick shims. .560"-.600" - .201" (5.1mm) diameter holes. Fits .560" #080-544-012AV AF-12 Steel Shim Stk Kit, 5A46G70​ �����$ 62.99 (14.2mm) to .600" (15.2mm) hole spacings. .860" - .153" (3.9mm) diameter gunsmithing required. Lever can be installed so flip path is on left or 3A22H08 ����������������������������������������������������� 25.99 right side. Quick-flip tab has deep grooves for easy activation with holes. Fits .860" (21.8mm) hole spacings. #713-000-113AV 9" Picatinny Scope Ring Base, ​ a flick of your thumb. ab 3A13F44 ������������������������������������������������������� 14.49 #396-100-505AV .560"-.600" Shims, 6C7J45​ ������������������� $ 11.99 SPECS: Aluminum, hardcoat anodized, matte black. #396-100-860AV .860" Shims, 6C7H73​ ������������������������������� 11.99 #100-004-239AV Quick-Flip Mount w/Bolt-On Base, ​ EGW PICATINNY BASE STOCK #713-000-112AV 18" Picatinny Scope Ring Base, ​ 1B153C82 ������������������������������������������������ $ 163.40 3A22M08 ����������������������������������������������������� 24.99 Build A Custom Base In Steel Or Aluminum; Pre-Cut Slots Speed The Job WILCOX INDUSTRIES MOUNTING SOLUTIONS SCOPE SHIM KIT Scope base stock is ma- COMP-M MOUNT chined to MIL STD 1913 Picatinny dimensions for fabricating custom PICATINNY RAIL BLANK Have The Right Shim, rifle or handgun optic bases. Pre-cut cross-slots speed the job and Strong, Lightweight, Tactical Mount Right At Your Fingertips allow use of any Picatinny scope rings. Ideal for quickly building a For Custom Mounting versatile base for a gun with non-standard hole spacing, rather than For Secure Attachment Of Comp Series An economical Of Accessories & drilling new holes in the receiver. Available in pre-hardened steel or Sights and practical kit that aluminum, both with a matte black finish. Bottom of the base is flat, Optics provides a complete so it can be radius cut to fit any receiver contour. ab Compact tactical mount securely posi- selection of scope CNC machined to true Picatinny dimensions, these cut-to- tions an Aimpoint red dot optic the correct SPECS: 4140 pre-hardened steel, blued, or 7075 T6 aluminum, hard- shims. When “just a 3 length blanks provide unlimited accessory or scope mounting op- height above a flattop receiver rail. Fits Aimpoint CompC3/M2/ML2/ coat anodized, matte black. 7 /4" (19.7cm) long, 1" (2.5cm) wide base, little more” height is 3 tions for custom applications. Bases are left undrilled for fitting to /4" (1.9cm) high. M3/ML3 series, 3XMAG magnifier, and other optics with 30mm tube needed for perfect guns with non-standard hole spacing or those needing special ring that require single-ring mounting. Skeletonized construction pro- scope base and ring #296-000-144AV Steel Picatinny Rail Stock, 6B61L00​ �����$ 63.00 positioning. Precision crossslots easily accept Picatinny or Weaver- vides full support without the weight of excess metal for an excep- alignment. ab #296-000-145AV Aluminum Picatinny Rail Stock, ​ style accessories and scope rings. Open top design reduces weight 5 tionally strong, solid, yet lightweight mount. Four, steel, hex-head SPECS: Steel, blued. 6B52A00 ����������������������������������������������������� 54.00 without sacrificing strength. Available in 5 /8", 9", and 18" lengths. ab 5 cap screws anchor the top ring half to the mount to ensure full Kit contains 10 of each SPECS: 6061 T6 aluminum, natural, matte finish. 5 /8" (14.3cm), 9" 5 contact with sight body to prevent slippage. Rail Grabber clamping hole spacing and thick- (22.8cm), or 18" (45.7cm) long, .206" (10mm) slot width, /8" (1.59cm) high system secures the mount to receiver and maintains sight align- ness (80 total). Available from top of receiver to bottom of dovetail. Mounting holes not drilled. ment even under the battering of sustained rapid fire. Unique, cap- 5 in .600" (15.2mm) and #100-003-790AV 5 /8" Rail Blank, 1K26D52​ �����������������������$ 29.99 tive cross-bolt is divided lengthwise; one side provides a slop-free ® .860" (21.8mm) c-toc hole spacing and .006" (.152mm), .008" (.203mm), DELRIN RING REDUCERS #100-003-789AV 9" Rail Blank, 1K44M21​ ��������������������������� 47.99 fit in a MIL-STD 1913 Picatinny slot, while rotating the bolt a half turn .010" (.254mm), .012" (.304mm) thickness. Refills sold 10 per pak. Make Big Rings Accept Small Scopes #100-003-788AV 18" Rail Blank, 1K70Q74​ ������������������������� 75.99 exposes the side that snugs into the narrower Weaver-type slot. An #080-814-000AV Scope Shim Kit, 8K105F16​ �������������������$ 119.99 oversized thumb nut with deep grasping grooves lets the operator Non-marring, Delrin sleeves sur- STOCK # SIZE STOCK # SIZE tighten the mount with hand pressure only; coin slot in the head lets round scopes to adapt them to fit you apply additional tightening force with a U.S. nickel or quarter. ab #080-814-606AV .600" x .006" #080-814-806AV .860" x .006" bigger-diameter rings. Black, matte SPECS: Aluminum, hardcoat anodized, matte black finish. Height mea- #080-814-608AV .600" x .008" #080-814-808AV .860" x .008" finish won’t clash with your scope or sured from top of rail to bottom of scope tube: 1.120" (2.84cm). 3.1 oz. #084-000-091AV 30mm To 1" Ring Rdcrs, 4H13C82​ ������ $ 14.99 gun. Reducers are sliced in half for 7 #080-814-610AV .600" x .010" #080-814-810AV .860" x .010" 8 RIFLE #084-000-092AV 1" To / " Ring Reducers, 4H13G82​ ������ 14.99 (88g) weight. Fits Aimpoint CompC3/M2/ML2/M3/ML3, 3XMAG magni- easy, dropon installation onto virtually any brand of rings in the sizes #080-814-612AV .600" x .012" #080-814-812AV .860" x .012" 3 fier, and other optics that require a single 30mm ring mount. listed below. Sold as front-and-rear-ring sets. ab #084-000-093AV 1" To /4" Ring Reducers, 4H13P83​ ������ 14.99 #100-004-257AV Comp-M Mount, 4B00NSN​ �����������������$ 178.99 — Advise # — Shim Refill Pak, 8K10J03 ����������������������������� $ 11.99 SPECS: Kit includes front and rear reducer sets. Delrin, matte, black finish. #084-000-094AV 30mm To 26mm Reducers, 4H13G78​ ��� 14.99

GUARANTEED. FOREVER.®

PAGE 274 SINCE 1939 Office/Tech: 641-623-5401