Kirby Morgan 57 Specifications s2
Kirby Morgan Superlite 27 Specifications
Fiberglass and Carbon Fiber Reinforced Shell
The helmet shell is hand laid up glass fiber reinforced thermal setting polyester (fiberglass) with carbon fiber reinforcement at key points for added durability. It is light and highly impact resistant, and provides a heat/cold barrier as well as being an excellent electrical nonconductor. Kirby Morgan has over 50 years experience in composite laminations.
A_Head Cushion
The Head Cushion gives the helmet a secure, well balanced feel as well as excellent thermal protection during long work periods.
B_Silicone Oral Nasal
The "universal" Silicone Oral Nasal fits the SL 17 & 27 helmets as well as the KMB18 & 28 Band Masks. It is made of a superior silicone material which is hypo-allergenic and has a longer work life than standard latex.
C_Port Weight provides balance, comfort, and an accessory mounting area.
D_Locking Collar Latch System
The latch catches consist of two sealed pull pins which are pulled forward to release the neck collar and neck dam locking system. Even when the latches are released, the neck dam maintains a positive seal and will not allow the seal to be broken until the collar actually clears the diver's shoulders, thus preventing any flooding of the helmet.
E_Quick Change Modular Communications System
Because the module is easily removed from the helmet, repair or replacement of communications parts is quick and trouble free. It comes in either of two different configurations, male waterproof connector or a bare wire post connection.
F_Externally Adjustable Chin Strap
The externally adjustable chin support, along with the adjustable neck pad on the locking collar gives the diver a comfortable, secure fit.
G_Adjustable Neck Pad
The adjustable neck pad is made from a scuff resistant elastomer and, in conjunction with the swing catch, provides protection for the bottom of the Helmet.
H_Neck Dam Swing Catch
The Swing Catch rotates out of the way to allow the neck dam assembly to be unsealed from the helmet. This simplifies removal of the helmet.
__500-040 __SuperLite 27 w/ bare wire posts
__500-041 __SuperLite 27 male waterproof conn.
__525-019 __O-Ring Kit
__525-309 __Regulator Rebuild Kit
__525-311 __Side Block Rebuild Kit
__525-333 __Spares Kit, SuperLite 27
__525-341__ Overseas Spares Kit, SuperLite 27
__515-023__ Comm. Assembly w/Posts
__515-024 __Comm. Assembly w/male wp. conn.SuperLite 27
___
__ / _SuperLite 27 Accessories
__510-504 __Neoprene Neck Dam (standard)
__510-500 __Latex Neck Dam (optional)
__525-100 __Hot Water Shroud Kit
__525-120 __Double Exhaust Kit
__525-403 __Welding Lens Assembly ______525-400 __Welding Shield Assembly
__525-620 __Regulator Tool Kit w/Pouch
_Upgrade Kits for earlier SL 27s
__525-106 __Swing Catch retrofit kit
__525-220 __Port Weight Kit
__525-119 __Head Cushion upgrade kit
__525-210__ Sealed Pull Pin Kit