www.datex.com Datex - Protection Covers for MAZDA protect safely – save cost – boost your image Model List - MAZDA Latest update: September 2019 current models fender cover front cover entry and rear sill cover models 49 0000 210 49 0000 211 49 0000 222 Mazda2 2018 49 0000 210 49 0000 211 49 0000 222 Mazda3 2019 49 0000 210 49 0000 211 49 0000 222 Mazda6 Facelift since 2018 49 0000 210 49 0000 211 49 0000 222 Mazda CX-3 2018 49 0000 210 49 0000 211 49 0000 222 Mazda CX-30 since 09/2019 49 0000 210 49 0000 211 49 0000 222 Mazda CX-5 2018 49 0000 210 49 0000 211 49 0000 222 Mazda MX-5 since 09/2015 49 0000 210 49 0000 211 49 0000 222 *) best protection with front cover only predecing models fender cover front cover entry and rear sill cover models 49 0000 210 49 0000 211 49 0000 222 Mazda 121 49 0000 210 49 0000 211 not tested Mazda2 until 2018 49 0000 210 49 0000 211 not tested Mazda3 until 2019 49 0000 210 49 0000 211 49 0000 222 Mazda 323 49 0000 210 49 0000 211 not tested Mazda 626 49 0000 210 49 0000 211 not tested Mazda5 until 2015 49 0000 210 49 0000 211 not tested Mazda6 until 2018 49 0000 210 49 0000 211 not tested Mazda BT-50 2006 - 2011 49 0000 210 49 0000 211 not tested Mazda B-Serie 49 0000 210 49 0000 211 not tested Mazda CX-3 until 2018 49 0000 210 49 0000 211 49 0000 222 Mazda CX-5 2011 - 2018 49 0000 210 49 0000 211 49 0000 222 Mazda CX-7 2006 - 2012 49 0000 210 49 0000 211 not tested Mazda Demio 49 0000 210 49 0000 211 *) not tested Mazda MPV 49 0000 210 49 0000 211 not tested Mazda MX-3 49 0000 210 49 0000 211 not tested Mazda MX-5 NA/NB/NC 49 0000 210 49 0000 211 not tested Mazda MX-6 49 0000 210 49 0000 211 not tested Mazda Premacy 49 0000 210 49 0000 211 *) not tested Mazda RX-7 49 0000 210 49 0000 211 not tested Mazda RX-8 49 0000 210 49 0000 211 not tested Mazda Tribute since 04/2001 49 0000 210 49 0000 211 not tested Mazda Xedos 6 49 0000 210 49 0000 211 not tested Mazda Xedos 9 49 0000 210 49 0000 211 not tested *) best protection with front cover only 02DATEX-Werkstattschutzbezüge Model list MAZDA GmbH tel. +49-2363-34579 - fax: +49-2363-34443 Brand specific fender covers for MAZDA MAZDA O/N 49 0000 210 * The fender covers protect the front fenders of all MAZDA models against damages and stains during repair and maintenance. Non-scratch attachment without magnets. Made of grey foam-coated artificial leather with extra strong additional padding in the upper work area. With imprint of the MAZDA logo to support the workshop’s image. Size: about 115 x 74 cm Weight: about 1.4 kg Packaging: 1 pair Brand specific front cover for MAZDA MAZDA O/N 49 0000 211 * The front cover protects the front part of all MAZDA models against damages and stains during repair and maintenance. With coated mesh fabric covering the headlamps. Non-scratch attachment without magnets. Made of grey foam-coated artificial leather with additional padding covering the bonnet lock. With imprint of the MAZDA logo to support the workshop’s image. The mesh fabric in the brand specific front cover for MAZDA reliably prevents heat accumulation and possible damage to the headlamps. Size with open Velcro strips: about 275 x 80 cm Size with closed Velcro strips: about 260 x 80 cm Weight: about 1.2 kg Protection Against Overheating Packaging: 1 piece 03 Brand specific covers for MAZDA * sold exclusively through Mazda portal / SST webshop Werner Weitner GmbH · Sollnau 14 · 85072 Eichstätt · Germany tel.: +49 8421 9816-0 · fax: +49 8421 9816-98 · [email protected] Cover for entry plate and rear end MAZDA Entry plate MAZDA O/N 49 0000 222 * This cover protects the entry plate and the rear end during repair and maintenance. With extra strong sandwich padding for reliable protection during the installation and the removal of heavy front seats. Non-scratch attachment without magnets by fibreglass rod and several Velcro straps. With Velcro strips for height adjustment. Made of strong foam-coated artificial leather, grey. With imprint of the MAZDA logo to support the workshop’s image. Size: about 152 x 78 cm Weight: about 2.0 kg Packaging: 1 piece Rear end Seat cover for MAZDA MAZDA O/N 49 0000 223 * The seat cover reliably keeps stains off the front seats. Made of strong grey artificial leather. All twin seams, strained seams are reinforced by artificial leather. With imprint of the MAZDA logo to support the workshop’s image. Washable at 30 °C. Size: large universal size Weight: about 0.8 kg Packaging: 1 piece 04 Cover for entry plate and rear end, seat cover * sold exclusively through Mazda portal / SST webshop Werner Weitner GmbH · Sollnau 14 · 85072 Eichstätt · Germany tel.: +49 8421 9816-0 · fax: +49 8421 9816-98 · [email protected] Wall bracket MAZDA O/N 49 0000 224 * For clean and tidy storage of all DATEX fender, front, seat and fibreglass covers. Made of grey steel tube. Including mounting material. Total width: about 100 cm Weight: about 1.6 kg Packaging: 1 piece * sold exclusively through Mazda portal / SST webshop Werner Weitner GmbH · Sollnau 14 · 85072 Eichstätt · Germany tel.: +49 8421 9816-0 · fax: +49 8421 9816-98 · [email protected] Back seat bench cover for MAZDA Datex O/N D-S 16 MZ ** The back seat bench cover reliably keeps stains off the entire back seat bench. Made of strong grey artificial leather. Strong universal attachment by Velcro straps and suction cups. With imprint of the MAZDA logo to support the workshop’s image. Size: about 150 x 145 cm Weight: about 1.1 kg Packaging: 1 piece ** distributed by Datex Werkstattschutzbezüge GmbH, Germany Brand specific bonnet cover for MAZDA Datex O/N D-MZ 60-05 ** The bonnet cover protects the entire bonnet during windscreen repairs. Non-scratch attachment without magnets by Velcro straps. Made of grey foam-coated artificial leather. With imprint of the MAZDA logo to support the workshop’s image. Size: about 220 x 135 cm Weight: about 1.0 kg Packaging: 1 piece ** distributed by Datex Werkstattschutzbezüge GmbH, Germany 05 Wall bracket, back seat bench cover, bonnet cover First-class interior protection Our products safeguard secure protection against damages and stains – even in very sensitive car interiors. High class materials with workshop oriented properties effi- ciently guarantee protection in special applications. For example antistatic polyethylene, or anti-slip undersurfaces for seat covers. Different colours signalise special properties and help to identify the right special cover. Most of our interior protection products are available on a handy compact roll. Our wall bracket allows clean, tidy and central storage of a great diversity of products. Tyre sacks made of polyethylene Wall bracket for three compact rolls (Datex O/N D-R 38 **) excellent quality, polyethylene, white, thickness: 35 µ. creates clarity and accessibility, for all Datex compact rolls, sturdy, Size type 1: about 1000 x 1000 mm (Datex O/N D-R 155**) wall-mounted steel tube construction, including mounting material. Packaging: 100 units on a compact roll Size: about 810 x 690 mm Weight: about 6.1 kg Packaging: 1 piece, Weight: about 3.9 kg Size type 2: about 1200 x 1200 mm (Datex O/N D-R 156**) Wall bracket for one compact roll (Datex O/N D-R 37 **) Packaging : 100 units on a compact roll (without picture) Weight: about 9.0 kg Size: about 810 x 210 mm Packaging: 1 piece, Weight: about 1.8 kg 06 Tyre sacks, wall brackets ** distributed by Datex Werkstattschutzbezüge GmbH, Germany antistatic anti-slip Seat cover “antistatic” (Datex O/N D-E 3000 **) Seat cover “Optifit” (Datex O/N D-E 2000 **) protection of electronic devices against electrostatic discharge, anti-slip bottom, for all single seats, made of extra strong polyethylene with made of polyethylene, colour: white/blue. antistatic material fractions, y ellow identification colour. Size: about 790 x 1330 mm Size: about 840 x 1400 mm Packaging: 500 units on a compact roll Packaging: 250 units on a compact roll Weight: about 11.0 kg Weight: about 9.0 kg extra strong classic Seat cover “Optifit deluxe” (Datex O/N D-E 2300 **) Seat cover “Classic” (Datex O/N D-E 35 **) extra strong, anti-slip bottom, made of polyethylene, colour: white. made of extra strong polyethylene, colour: white/silver. Size: about 790 x 1300 mm Size: about 790 x 1330 mm Packaging: 500 units on a compact roll Packaging: 300 units on a compact roll Weight: about 11.0 kg Weight: about 10.0 kg 07 Disposable seat covers ** distributed by Datex Werkstattschutzbezüge GmbH, Germany antistatic Reusable steering wheel cover “antistatic” Reusable steering wheel cover (Datex O/N D-L 20 **) protection of electronic devices (Datex O/N D-L 3100 **) elasticated, for passenger cars, against electrostatic discharge, elasticated, for passenger cars and made of extra strong polyethylene, colour: blue. lorries, made of extra strong polyethylene with antistatic material Packaging: 20 pieces per box fractions, yellow identification colour. Weight: about 0.5 kg Packaging: 20 pieces per box Weight: about 0.7 kg Disposable steering wheel cover (Datex O/N D-L 18 **) Disposable steering wheel and gear shift cover for steering wheels of passenger cars and lorries, for steering wheels of passenger cars and (Datex O/N D-L 42 **) polyethylene, very stretchable.