Click here for more information: elandcables.com | 107mm2 Copper Silver Contact Wire 107mm2 Copper Silver Contact Wire Eland Product Group: 91 APPLICATION CABLE THIRD-PARTY ACCREDITATION Copper silver contact wire provides direct contact to Network Rail (NR) certified and PADS listed as meeting pantograph transmitting power from overhead line system to the requirements for installation on their network the locomotive. The contact wire will be suspended from Network Rail Certificate of Acceptance catenary wires via dropper wires. STANDARDS CONSTRUCTION BS EN 50149 AC 107 Drawing Number 1/148/440/A3 ISO/IEC 17025 LABORATORY TESTED Material This product is subject to the Quality Assurance protocols of The Cable Lab®, Copper Silver (CuAg-0.1%) an ISO/IEC 17025 accredited cable testing laboratory. Testing includes vertical flame, conductor resistance, tensile & elongation, and dimensional consistency, verified to published standards and approved product drawings. 24° 24° ISO/IEC IDENTIFICATION GROOVES 17025 Accredited Testing Laboratory 50° 8578 4.0 26° REGULATORY COMPLIANCE This cable meets the requirements of the RoHS Directive 2011/65/EU. RoHS compliance has been tested and confirmed by The Cable Lab® as meeting the requirements of the BSI RoHS Trusted KitemarkTM. 5.6 RoHS Trusted KITEMARK™ 12.3 KM 634267 DIMENSIONS ELAND PART NETWORK RAIL NOMINAL CROSS MINIMUM TENSILE MINIMUM MINIMUM MINIMUM ELECTRICAL MINIMUM ELECTRICAL MAXIMUM WEIGHT NO. PART NO./ PADS SECTIONAL AREA STRENGHT Rm BREAKING ELONGATION CONDUCTIVITY CONDUCTIVITY ELECTRICAL kg/km 2 2 mm N/mm LOAD FM AT BREAK A200 AT 20ºC AT 20ºC RESISTANCE R kN % m/ohms/mm2 % IACS ohms/km 91/012685 0091/012685 107 360 37.4 3 56.3 80 0.171 952 The information contained within this datasheet is for guidance only and is subject to change without notice or liability. All the information is provided in good faith and is believed to be correct at the time of publication. When selecting cable accessories, please note that actual cable dimensions may vary due to manufacturing tolerances. UK T 020 7241 8787 | F 020 7241 8700 | [email protected] | www.elandcables.com International T +44 20 7241 8740 | F +44 20 7241 8700 | [email protected] technicalspecification | 1 of 1.