DSV SAND ISLAND Technical Specifications VESSEL OVERVIEW The vessel was originally built in 1982 to serve as an offshore supply and rescue vessel built to ABS and USCG standards. It serves the Cook Inlet and Alaska Gulf coast waters. The Sand Island is an 80' by 25' wide dive support vessel that berths 12 people. The vessel is powered by twin Cummins engines with a combined 700hp. It has the capacity to make efficient crossings in the Cook Inlet Basin against extreme tidal currents. This allows shorter run times between tasks and can reduce travel times. The vessel also supports a deep diving air system and hydraulic tool support. It has enough deck space to support additional equipment as needed. Specifications Owner Global Diving & Salvage, Inc. Tankage 4000 gals fresh water forward & 4000gals Aft Vessel Class 80' Steel Dive Support Vessel 500gals lube oil USCG Doc Nbr 643919 8000gal fuel oil Electronics Furuno Radar 32mi. (1) Capable of cargo transfer of both fuel and water VHF Radios (3) Hailer Aux. Equip. (1) 40 hp hydraulic deck winch rated load Simrad color sounder 25,000lbs. / drum capacity 1,500' 3/4” cable Water current profiler (2) 4000lbs air winches Nobletec Nav. Software 15 gpm hyd system with flow controls for under water tooling ComNav auto pilot ComNav Satellite compass/GPS 300 amp multi process welding machine Garmin GPS (2) Oxy / Acetylene torch Wood Freeman Compass/Auto pilot (reserve) 3 meter rigid inflatable skiff / davit deployed JHS AIS system Berthing (3) 2 man staterooms Sat phone system One six man state room Cell phone/Fax system David Clark wireless deck com system Propulsion (2) NTA855 Cummins Rated at 350hp ea. rebuilt/replaced 2010 (2) Aquamet 17 ss Shafts rebuilt 2013 Aux. Engines 6BT5.9 Cummins diesl 99kw generator, replaced 2010 6068 John Deere 100 kw generator, new 2013 Deep Air Air Dive Spread to 200 FSW Diving System ADCP – Current measuring Hyperbaric Chamber w/ current ABS & USCG certs (1) LP diving air compressors HP diving air compressor HP 50/50 Decompression breathing gas HP air bank CO meter for diver's breathing Underwater welding & cutting system MORE THAN JUST A DIVING COMPANY www.gdiving.com | [email protected] | 24hr Toll Free 1-800-441-3483.