Small Engine Parts & Accessories TTRIMMERRIMMER PPARTSARTS TRIMMER LINE - Clam Shell TRIMMER LINE - 5 LB SPOOLS Commercial Grade Commercial Grade Trimmer Line Trimmer Line Note: Trimmer line may vary in colour Part# Size Length in Length in feet meters Part# Size Length in Length in feet meters 380-2043 .065 50 ft 15.24 380-451 .080 2080 ft 609.6 380-2123 .080 50 ft 15.24 380-2203 .095 40 ft 12.19 380-469 .095 1445 ft 426.7 380-2383 .105 30 ft 9.14 380-477 .105 1150 ft 350.5 TRIMMER LINE - 380-485 .130 765 ft 288.6 1 LB DONUT DISPENSER UNIVERSAL TRIMMER PARTS continues on next page. Following the Universal Commercial Grade Trimmer Line Trimmer Parts section is our “NEW” “TRIMMER PARTS - O.E.M.” section- done in alphabetical order. Part# Size Length in Length in feet meters GRASS / BRUSHCUTTER 380-303 .065 611 ft 182.9 BLADE - Nylon and Rubber 380-311 .080 416 ft 121.9 380-329 .095 289 ft 85.3 380-345 .105 230 ft 70.1 380-337 .130 153 ft 45.7 380-353 .155 105 ft 27.3 Part# Diameter Centre Teeth Thick Usage Hole ID TRIMMER LINE - 390-013 9″ 1″ 3 Grass (225 mm) (25.4 mm) 3 LB SPOOLS Three blade nylon cutter for weed Trimmers, made of long lasting, high strength nylon. (While Quantities Last) Commercial Grade 390-021 9″ 1″ 4 Grass Trimmer Line (225 mm) (25.4 mm) 390-022 10″ 1″ 4 Grass Note: Trimmer line may vary in colour (255 mm) (25.4 mm) Part# Size Length in Length in Four blade nylon cutter for weed Trimmers, made of long lasting, feet meters high strength nylon. .080 1248 ft 365.8 390-019 9″ 1″ 8 Grass 380-410 (225 mm) (25.4 mm) 380-428 .095 867 ft 256 Eight blade rubber cutter for weed Trimmers. Used on Stihl and 380-436 .105 690 ft 210.3 many other trimmer makes. Reinforced steel center plate molded into blade for more secure mounting. (While Quantities Last). 380-444 .130 459 ft 137.2 390-070 Blade Reducer - For nylon brush 380-448 .155 315 ft 91.4 blades. To reduce nylon brushcutter blade centres from 1″ (25.4mm) ID 380-450 .170 269 ft 85.3 to 3/8″, 1/2″, 5/8″ or 20 mm ID. Note: Dual polymer line. Outer layer prevents welding. High (While Quantities Last) strength inner core resists breaking, re-inforced with Aramid fi bers. (Priced and sold in set of 4 pieces) T 50-01 T TTRIMMERSmall REngine IPartsM & MER PPARTSARTS Small Engine Parts & Accessories BRUSHCUTTER BLADES BRUSHCUTTER BLADES 3 Tooth Steel Blade 8 Tooth Steel Blade Part# Diameter Centre Teeth Thick Usage Hole ID Part# Diameter Centre Teeth Thick Usage 720-901 10″ 25.4 mm/ 3 2.25 mm Grass Hole ID (250 mm) 20 mm (1.00″ to .750″) 720-909 8″ 25.4 mm/ 8 1.5 mm Grass Note: Includes 20mm metal reducer bushing for easy mounting on .750″ arbors. (200 mm) 20 mm (1.00″ to .750″) 12″ 25.4 mm/ 3 2.25 mm Grass 720-902 9″ 25.4 mm/ 8 1.8 mm Grass (300 mm) 20 mm 720-910 (1.00″ to .750″) (225 mm) 20 mm (1.00″ to .750″) Note: Includes 20mm metal reducer bushing for easy mounting on .750″ arbors. Eight-blade steel cutter for Trimmers. All Eight-blades include 20 mm reducer bushing. Tri-Cut 3 Tooth Grass & Brush Blade EIA Steel Blade Part# Diameter Centre Teeth Thick Usage Hole ID 720-900 10″ 25.4 mm/ 3 4.0 mm Grass & (250 mm) 20 mm Brush (1.00″ to .750″) Part# Diameter Centre Teeth Thick Usage Note: Includes 20mm metal reducer bushing for easy mounting on .750″ arbors. Hole ID 720-903 12″ 25.4 mm/ 3 4.0 mm Grass & 720-870 8” 20 mm 22 1.5 mm Clearing (300 mm) 20 mm Brush (200mm) (1.00″ to .750″) Note: Includes 20mm metal reducer bushing for easy mounting on .750″ arbors. 720-871 9” 20 mm 24 1.8 mm Clearing (225mm) 720-872 8” 25 mm 22 1.5 mm Clearing (200mm) 4 Tooth Steel Blade 720-873 9” 25 mm 24 1.8 mm Clearing (225mm) Part# Diameter Centre Teeth Thick Usage Hole ID 720-906 8″ 25.4 mm/ 4 1.5 mm Grass (200 mm) 20 mm MAXI Steel Blade (1.00″ to .750″) 720-907 9″ 25.4 mm/ 4 1.5 mm Grass (225 mm) 20 mm (1.00″ to .750″) (Replaces STIHL# 4001-713-3801 / 4112-713-3801) Part# Diameter Centre Teeth Thick Usage 720-908 10″ 25.4 mm/ 4 1.8 mm Grass Hole ID (250 mm) 20 mm (1.00″ to .750″) 720-856 8″ 20 mm / 22 1.5 mm Clearing (200 mm) 25.4 mm Four-blade steel cutter for Trimmers. All Eight-blades include 20 mm reducer bushing. 720-857 9″ 20 mm / 24 1.8 mm Clearing 390-344 Blade Reducer - For metal brush (225 mm) 25.4 mm blades to reduce steel brushcutter blade centers from MAXI series brushcutter blades are recommended for straight shaft trimmers 1″ (25.4mm) ID to 20mm ID. of 40cc and larger. Rated at 13000 RPM’s. (Includes: reducer bushing) Ground edge can be easily re-sharpened with standard saw chain fi les. (Sold in multiples of 5) T 50-02 T Small Engine Parts & Accessories TTRIMMERRIMMER PPARTSARTS BRUSHCUTTER BLADES UNIVERSAL continued 750-889 Ear Protector - Foldable General purpose ear protectors off er comfort XRT Steel Blade and economical price. Padded ear cushions for comfort. Adjustable headband size. Compact size for easy storage. Part# Diameter Centre Teeth Thick Usage Individually package for ease of display. Tested in accordance with ANSI S3.19 (NRR 19 dB). Hole ID (While Quantities Last) 720-878 8” 20 mm 20 1.5 mm Clearing Kill Switch (200mm) 430-017 720-879 9” 20 mm 22 1.5 mm Clearing Used as an on / off switch. Found on (225mm) many Chain saws and Trimmers using a single wire, self grounding type switch. 720-858 8″ 25.4 mm 20 1.5 mm Clearing (200 mm) Kill Switch found on many small chain saw and trimmer models with spade terminal wire end. 720-859 9″ 25.4 mm 22 1.5 mm Clearing (225 mm) 390-378 Universal Nylon Blade Guard XRT series brushcutter blades are recommended for straight shaft trimmers of 24cc and larger. Rated at 13000 RPM’s. (Includes: reducer bushing) Ground edge can be easily re-sharpened with standard saw chain fi les. Fits straight shaft units; for shaft sizes: 24mm, 26mm and 28mm. Overall length of guard 10-1/2″. Nylon guard is black in colour. (Includes mounting hardware). 390-671 Trimmer / Brushcutter Handle Part# Diameter Centre Teeth Thick Usage Heavy duty construction. Hole ID Handle fi ts shafts OD’s 720-916 8″ 20mm 70/80 1.8 mm Clearing 24mm, 26mm and 28 mm. (200 mm) (Includes hardware) 720-917 8″ 1″ 80 1.8 mm Clearing Trimmer Harness (200 mm) (25.4 mm) 385-997 Standard Duty 720-918 9″ 1″ 60 1.4 mm Clearing (225 mm) 25.4 mm) Universal clamp makes strap NOTE: Blade reducer part# 390-344 can be used in our part# 720-917 and adaptable to most Trimmers, 720-918 steel brushcutter blades to reduce the center ID from 1″ to 20mm ID. Metal Detectors and Blowers. Adjustable strap length fi t most sizes. 385-989 Trimmer Harness UNIVERSAL Heavy Duty 140-046 John Deere# PT2637 Single shoulder strap. Echo# 17722801110 Fully adjustable strap with heavy duty shoulder pad and hanger. Starter Handle Fits most Trimmer & Leaf Blowers. Plastic starter handle. For use on small equipment applications. Ideal for small trimmers, brushcutters and chain saw applications. 385-990 Shoulder Strap / Harness 750-890 Ear Protectors - Red General purpose ear protectors off er comfort and economical price. Handheld / Trimmer / Blower Individually package for ease of assist harness with suspension. display. Tested in accordance with Features: Soft shoulder pad, Bungee Suspension, ANSI 53.19 (NRR25dB) Adjustable one size fi ts all strap with hardware. T 50-03 T TTRIMMERRIMMER PPARTSARTS Small Engine Parts & Accessories UNIVERSAL continued UNIVERSAL continued 385-982 Trimmer Harness Deluxe - Universal 385-138 Head Spring Fits trimmer heads found on Echo, Shindaiwa and Stihl. Found on Compact Twist Feed & Heavy Duty Deluxe. Double shoulder Twist Feed. Size: 7/8″ OD X 1″ L approximately. strap and waist pad. Fully adjustable strap 385-658 Head Spring with heavy duty Found on many Echo trimmer models: shoulder pad and hanger. GT1100, GT2000, GT2103, GT2400. Fits most Trimmer and 2 line Bump Feed and Mini Bump Feed; Leaf Blowers. also found on many Stihl trimmer heads. Colour: Orange or Yellow Measures: 1-3/16″ OD X 1″ L approximately. 385-203 Head Spring Fits Echo, Shindaiwa and Stihl. Compact Twist Feed and Heavy Gear Box Grease Duty Twist Feed trimmer heads. 705-854 Measures: 1-1/2″ OD X 1-1/4″ L approximately. For all bevel gears found in Trimmer / Brushcutter gear boxes. HOMELITE (also see HOMELITE under “TRIMMER PARTS - O.E.M”) Display case included with the (Priced and sold individually) 385-192 DA-03001-A purchase of (24) grease tubes. John Deere# UP0676 390-500 Shoulder Bolt Assembly Stihl# 4111-710-8700 Multi Application Bump Feed Trimmer Head Fits Stihl and our RotoTrim Disk. Used on models: ST155, Size: .473″ shoulder OD X (Priced individually) ST165, ST175, ST285, ST385, 3/8″ long X 1″ overall length.