® Installation instructions for part 99-7624 Nissan Multi-kit 2007-Up WIRING & ANTENNA CONNECTIONS (sold separately) (see application list on page 2) Wiring Harness: • 70-7552 Antenna Adapter: • 40-NI12 99-7624 KIT FEATURES • ISO DIN radio provision with pocket • ISO DDIN radio provision KIT COMPONENTS TOOLS REQUIRED • A) Radio housing trim panel, standard • B) Radio housing trim panel, wide • C) Bracket #1 • Panel removal tool • Phillips screwdriver • D) Bracket #2 • E) Bracket #3 • F) Spacers • G) Pocket • H) (4) #8 x 3/8” Phillips screws A B C D E F G H CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the REV. 10/15/2020 INST99-7624 REV. on position, or while the vehicle is running. METRA - The World’s best kits ® metraonline.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION 99-7624 Applications Table of Contents Chevrolet Dash Disassembly City Express 2015-Up Chevrolet – City Express 2015-Up ...................................................................................... 6 Nissan Nissan Cube 2009-2014 – Cube 2009-2014 ............................................................................................. 3 Frontier (with 4.3” screen) 2013-Up – Frontier/Xterra (with 4.3” screen) 2013-Up ..................................................... 3 Juke 2011-Up – Juke 2011-Up .................................................................................................. 4 NV 2012-Up – NV 2012-Up ..................................................................................................... 5 NV200 2013-Up – NV200 2013-Up ............................................................................................... 6 Quest (without NAV or rear seat entertainment) 2011-2016 – Quest (without NAV or rear seat entertainment) 2011-2016 ..........................7-8 Rogue 2011-Up – Rogue 2011-2013 ........................................................................................... 9 Rogue Select 2014 – Rogue Select 2014 .......................................................................................... 9 Titan (with 4.3” screen) 2013-2015 – Titan (with 4.3” screen) 2013-2015 ............................................................... 10 Versa 2007-Up – Versa 2007-2011 ........................................................................................... 10 Versa Note 2014-Up – Versa 2012-Up .............................................................................................. 11 Xterra (with 4.3” screen) 2013-2015 – Versa Note 2014-Up ...................................................................................... 11 – Xterra (with 4.3” screen) 2013-2015 ............................................................... 3 Kit Assembly – Radio housing trim panel usage ....................................................................... 12 – Bracket tab layouts .....................................................................................13-15 – ISO DIN radio provision with pocket ................................................................... 16 – ISO DDIN radio provision .................................................................................. 17 2 99-7624 Dash Disassembly Nissan Cube 2009-2014 A/C Nissan Frontier (with 4.3” screen) 2013-Up/ 1. Remove (2) Phillips screws from Nissan Xterra (with 4.3” screen) the bottom of the a/c trim panel 2013-2015 then unclip and remove the panel. (Figure A,B) 1. Unclip and remove the trim panel above the radio and climate controls. 2. Remove (2) Phillips screws from (Figure A) the bottom of the radio trim panel (Figure A) 2. Remove the (1) Phillips screw under (Figure B) then unclip and remove the panel. panel and the (2) Phillips screws (Figure C) securing the radio brackets to the sub dash. (Figure B) 3. Remove (4) Phillips screws 3. Unclip and remove the entire panel securing radio to dash to remove. including the climate controls and Continue to kit assembly factory radio. 4. Remove (4) Torx screws securing the radio to the trim panel. (Figure C, D) (Figure B) Continue to kit assembly (Figure C) PASS AIRBAG OFF (Figure C) (Figure A) (Figure D) 3 99-7624 Dash Disassembly Nissan Juke 2011-Up For manual climate controls: 1. Lift up to remove the small knob on the slide for “recirc/ fresh air”. 2. Unsnap and remove the trim from around the climate controls (controls stay in the dash). (Figure A-1) 3. Remove (2) Phillips screws securing the radio trim panel. (Figure B) 4. Remove (4) Phillips screws securing the radio, unplug and remove radio. (Figure C) (Figure A-1) (Figure B) Continue to Kit Assembly For auto climate controls: 1. Unclip and remove the climate control panel. (Figure A-2) 2. Remove (2) Phillips screws securing the radio trim panel. (Figure B) 3. Remove (4) Phillips screws securing the radio, unplug and remove radio. (Figure C) Continue to Kit Assembly (Figure A-2) (Figure C) 4 99-7624 Dash Disassembly Nissan NV 2012-Up 5. Unclip the circle trim around the key cylinder. 1. Unclip and remove the A/C vent to the right side of the factory radio. 6. Unclip and remove the gauge (Figure A) cluster trim panel. (Figure E) 2. Remove the (2) Phillips screws 7. Remove (2) Phillips screws exposed behind vent on radio trim exposed behind the panel on the panel. (Figure B) left side of the radio trim panel. (Figure B) (Figure F) 3. Unclip and remove the left A/C (Figure F) vent next to the instrument display. 8. Unclip and remove the trim panel (Figure C) surrounding the factory radio. 4. Unclip the top edge of the knee (Figure G) bolster panel below the steering column and let hang. (Figure D) 9. Remove (4) Phillips screws securing the radio. (Figure H) Continue to kit assembly (Figure C) (Figure G) (Figure A) (Figure D) (Figure E) (Figure H) 5 99-7624 Dash Disassembly Chevrolet City Express 2015-Up/ Nissan NV200 2013-Up 1. Unclip and remove the recirculate/ fresh slide button. (Figure A) 2. Unclip and remove the entire panel surrounding the radio including the a/c vents. (Figure B) 3. Remove (4) Phillips screws securing the radio. (Figure C) Continue to kit assembly (Figure A) (Figure B) (Figure C) 6 99-7624 Dash Disassembly Nissan Quest (without NAV or rear 5. Unclip and remove the panel on seat entertainment) 2011-2016 the end of the passenger side of the dash. (Figure E) 1. Unclip and remove the panels from the bottom left and right side of the 6. Remove (1) Phillips screw from center console. (Figure A) the trim panel above the glove box 2. Remove (2) clips per side exposed then unclip and remove the panel. behind lower panels. (Figure B) (Figure F) (Figure B) 3. Unclip and pull center console Continued on next page toward rear of vehicle. Note: You do not have to fully (Figure E) remove console. (Figure C) 4. Unclip and remove the trim panel to the left of the shifter housing the start/stop button. (Figure D) (Figure C) (Figure A) (Figure D) (Figure F) 7 99-7624 Dash Disassembly Nissan Quest (without NAV or rear seat 8. Remove (2) Phillips screws from 9. Remove (2) Phillips screws from 10. Remove (4) Phillips screws entertainment) 2011-2016 (Cont) the a/c control panel and unclip the bottom of the radio trim panel securing the radio. (Figure I) and let hang. (Figure H) including the vents then unclip and 7. Remove (1) Phillips screw from the remove the panel. (Figure H) Continue to Kit Assembly cup holder panel then unclip and remove the panel. (Figure G) (Figure H) (Figure G) (Figure I) 8 99-7624 Dash Disassembly Nissan Rogue 2011-2013/ Nissan Rogue Select 2014 1. If equipped with center speaker: Unclip and remove the grille then remove (4) Phillips screws to remove the speaker. (Figure A) 2. Unclip and remove the panel below the radio including the a/c controls. (Figure B) 3. Unclip the radio trim including the (Figure A) (Figure C) a/c vents then unplug the hazard switch and remove the panel. (Figure C) 4. Remove (4) Phillips screws securing the radio. (Figure D) Continue to kit assembly (Figure B) (Figure D) 9 99-7624 Dash Disassembly Nissan Titan (with 4.3” screen) Nissan Versa 2007-2011 2013-2015 1. Unclip and remove the panel 1. Unclip the entire dash panel above the radio. (Figure A, B) including the climate controls. 2. Remove (2) Phillips screws Unplug and remove the panel. securing the radio trim panel then (Figure A) unclip and remove the entire panel surrounding the radio and A/C 2. Remove (4) Phillips screws (Figure B) securing the radio. Unplug and controls. (Figure C) remove the chassis. (Figure B) 3. Remove (4) Phillips screws securing radio, unplug and remove Continue to kit assembly radio. (Figure D) (Figure A) Continue to kit assembly (Figure C) LOAD PRESET A-B-C CD RADIO DISP CLOCK 6CD CHANGER SCRL RPT 1 4 RDM SEEK TUNE TRACK AUDIO PUSH 2 PWR 5 AUX FF-REW FILE FOLDER SCAN 3 VOL 6 CAT (Figure A) CH (Figure B) (Figure D) 10 99-7624 Dash Disassembly Nissan Versa 2012-Up/ Nissan Versa Note 2014-Up 1. Unclip and remove the entire panel surrounding the radio including the A/C vents. (Figure A) 2. Remove (4) Phillips screws securing the radio. (Figure B) Continue to kit assembly (Figure A) (Figure B) 11 99-7624 Kit Assembly Radio housing trim panel usage Vehicle Trim panel Vehicle Trim panel Vehicle Trim panel Chevrolet City Express (without NAV) Nissan Rogue S (with Special Edition Nissan Versa S, S+ and SV (without Standard Wide Standard 2015-Up Package) 2012-2013 options) 2014 Chevrolet City Express (with NAV) 2015-Up Wide Nissan Rogue SV
Details
-
File Typepdf
-
Upload Time-
-
Content LanguagesEnglish
-
Upload UserAnonymous/Not logged-in
-
File Pages40 Page
-
File Size-