Instruction Manual DTM-7 Network Stereo Receiver En > Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others TableBefore Start of Contents Before Start ............................................................2 What's in the box .....................................................3 Part Names ............................................................4 Part Names .............................................................4 Install ......................................................................9 Step1: Speaker Layout ............................................9 Step2: Connect the Speakers ...............................10 Step3: Connect the TV & AV Components ............ 11 Initial Setup ..........................................................16 Initial Setup with Auto Start-up Wizard ..................16 Playback ..............................................................18 AV Component Playback ......................................18 BLUETOOTH® Playback ......................................19 Internet Radio .......................................................20 Spotify ...................................................................22 AirPlay® .................................................................23 USB Storage Device .............................................24 Listening To the AM/FM Radio ..............................25 Music Server .........................................................27 Multi-zone .............................................................29 Supplementary information for player functions ....30 Advanced Setup ..................................................31 Setup Menu ...........................................................31 AUDIO Menu .........................................................44 Web Setup ............................................................46 Firmware Update ..................................................47 Supplementary Information ...............................50 Supplementary Information ...................................50 Others ..................................................................51 Troubleshooting ....................................................51 General Specifications ..........................................56 Reference Information ..........................................58 2 > Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others What's in the box 1 1. Main unit (1) 2. Remote controller (RC-906S) (1), batteries (AAA/R03) (2) 3. Power cord (1) 4. FM indoor antenna (1) 5. AM indoor antenna (1) 0 Quick Start Guide (1) * This document is an online instruction manual. It is not included as an accessory. 0 Connect speakers with 4 ≠ to 16 ≠ impedance. Note that when connecting to both SPEAKERS A and B terminals, connect speakers with 8 ≠ to 16 ≠ impedance to both A and B. 2 3 0 The power cord must be connected only after all other cable connections are completed. 0 We will not accept responsibility for damage arising from the connection of equipment manufactured by other companies. 0 Functionality may be introduced by firmware updates and service providers may cease services, meaning that 4 5 some network services and content may become unavailable in the future. Furthermore, available services may vary depending on your area of residence. 0 Details on the firmware update will be posted on our website, etc. 0 Specifications and appearance are subject to change without prior notice. En 3 > Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Part Names Names Front Panel 7. Setup button: You can show advanced setting items on the TV and display to provide you with an even better experience (P31). 1. Í On/Standby button 8. Cursors (D / C / B / A), Enter button: Select the item with the cursors and press Enter 2. Speaker A/Speaker B button: Used to switch between outputting and turning off output to confirm. Use them to tune to stations when using TUNER (P25). from speakers connected to the SPEAKERS A or B terminal. 9. Return button: Returns the display to the previous state during setting. 3. Remote control sensor: Receives signals from the remote controller. 10.Master Volume 0 The signal range of the remote controller is within about 16y/5 m, at an angle of 20° on 11. Phones jack: Connect stereo headphones with a standard plug (Ø1/4z/6.3 mm diameter). the perpendicular axis and 30° to either side. 12.Dimmer button: You can adjust the brightness of the display in three steps. It cannot be 4. Hybrid Standby indicator: Lights if the unit enters standby mode when the features are turned off completely. enabled that continue to work when this unit is in standby, such as HDMI Standby 13.Zone 2 button: Controls the multi-zone function (P29). Through and Network Standby. 14.Off button: Switches the multi-zone function off (P29). 5. Display button: Switches the information on the display. You can display information such 15.Input dial: Switches the input to be played. as the input source, volume, and input format when pressed repeatedly during play. 16.Bass dial: Adjusts the bass. 6. Display (P5) 17.Treble dial: Adjusts the treble. 4 > Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 18.Balance dial: Adjusts the balance of the sounds output from the left and right speakers. 19.Memory button: Used to register AM/FM radio stations (P26). Menu button: Used to display the menu. 20.Tuning Mode button: Switches tuning to an AM/FM station between automatic tuning and manual tuning (P25). Play/Pause button: Used for play operations when playing Music Server or USB. Display 21.Preset 2 1 buttons: Used to select AM/FM radio stations. 1. The currently selected speaker system lights. Skip (:/9) buttons: Used for play operations 2. Lights in the following conditions. when playing Music Server or USB. Ë: When headphones are connected 22.USB jack: A USB storage device is connected so that Z2: ZONE 2 is on. music files stored in it can be played. You can also : When connected via BLUETOOTH supply power (5 V/1 A) to USB devices with a USB : When connected by Wi-Fi cable. NET: When "NET" is selected with the input selector and the unit is connected to the network. It will flash if the connection to the network is not correct. USB: When "NET" is selected with the input selector and the unit is connected by USB and the USB device is selected. Flashes if the USB is not properly connected. HDMI: HDMI signals are input and the HDMI input selector is selected. DIGITAL: Digital signals are input and the digital input selector is selected. 3. Lights according to the type of input digital audio signals. 4. Lights in the following conditions. TUNED: Receiving AM/FM radio FM ST: Receiving FM stereo. SLEEP: Sleep timer has been set (P39). AUTO STBY: Auto Standby has been set (P39). 5. Flashes when muting is on. 6. Speaker/Channel display: Displays the output channel of the speakers. 7. This may light when performing operations with the "NET" input selector. 8. Displays various information of the input signals. En 5 > Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 90° 180° Rear Panel 8. REMOTE CONTROL jack: An Onkyo product with RI jack can be connected and synchronized with this unit (P13). 1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals 9. IR IN/OUT terminals: Connected to the multi-room remote control kit. (*) with a digital optical cable or digital coaxial cable. 10.12V TRIGGER OUT A/B jacks: Allows you to connect a device with 12V trigger input jack 2. ETHERNET jack: Connect to the network with an Ethernet cable. to enable link operation between the device and the unit (P40, 41). (*) 3. USB jack: A USB storage device is connected so that music files stored in it can be 11. RS232 port: For connection to the home control system. (*) played. You can also supply power (5 V/500 mA) to USB devices with a USB cable. (*)Special devices or cable connections are necessary to use the control functions 9 to 11. 4. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH wireless Contact the specialized stores for more information. technology enabled device. Adjust their angles according to the connection status. 12.AC INLET: Connect the supplied power cord. 5. TUNER AM/FM 75≠ terminals: The supplied antennas are connected. 13.GND jack: The ground wire of the turntable is connected. 6. HDMI OUT jack: Connect a HDMI cable to transfer video signals and audio signals to a 14.AUDIO IN jacks: Input AV component audio signals with an analog audio cable. TV. 15.ZONE 2 LINE OUT jacks: Output audio signals with an analog audio cable to a pre-main 7. HDMI IN jacks: Input video signals and audio signals with a HDMI cable connected to an amplifier in a separate room (ZONE 2). AV component. 16.SUBWOOFER PRE OUT jacks: Connect a powered subwoofer with a subwoofer cable. 6 > Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Up to two powered subwoofers can be connected. The Remote Controller same signal is output from each of the SUBWOOFER PRE OUT jacks. 1. Í On/Standby button 17.SPEAKERS jacks: Connect speakers with speaker 2. Input Selector buttons: Switches the input to be played. cables.