Kapitel06.6.fm Seite 333 Freitag, 29. April 2011 11:42 11 Valve Train Engine Alfa Romeo, Fiat, Lancia Locking Tool Set KL-1682-42 K KL-1682-42 K Suitable for Alfa Romeo and Fiat 1.6 Mulitjet; 1.6 16V Multijet; 1.9 JTD 8/16 V und 2.4 JTD 10/20 V Common-Rail diesel engines. 1.6 Multijet - 110 Linea; 199 Grande Punto 1.6 16V Mulitjet - 135 Idea 1.9JTD (8V) - 323.02, 371.01, 182B4.000, 182B9.000, 186A6.000, 188A2.000, 188A7.000188B2.000, 192A1.000, 192A3.000, 937A2.000, 939A1.000; 1.9JTD (16V) - 192A5.000, 192B1.000, 937A5.000, 939A2.000; 2.4JTD (10V) - 325.01, 342.02, 362.02, 185A6.000, 841C.000; 2.4JTD (20V) - 841G.000, 939A3.000) e.g. Alfa Romeo: 145, 146, 147, 156, 159, 166, GT; Fiat: Punto, Grande Punto, Brava/Bravo, Marea/Weekend, Stilo, Doblo/Cargo, Multipla. This tool is used for locking and/or positioning engine shafts such as camshafts and crankshafts while changing a timining belt or during an engine repair. Scope of Delivery: KL-1682-42 K Locking Tool Set Part No. Description Qty. KL-1682-202 Locking tool for crankshaft 1 KL-0482-461 Locking pin for camshaft (2 pieces) 1 KL-1682-131 Locking tool for flywheel 1 KL-1682-4290 Storage case with insert 1 Locking Tool Set for Timing Belt Fiat 1.9 D / TD / JTD, 2.1 TD, 2.4 TD KL-1682-20 KA Suitable for Fiat 1.9 D/TD/JTD; 2.4 TD/JTD and PSA 1.9 D/TD, 2.1 TD diesel KL-1682-20 KA engines (engine code: 160 A7.000, 182 A7.000, 182 A8.000, 182 B4.000, 185 A2.000, 185 A6.000, 188 A2.000 and 188 A3.000) e.g. Fiat Brava, Bravo, Marea, Marea Weekend, Multipla, Punto, Scudo, Ulysse. For locking and/or positioning flywheels and engine shafts such as camshaft, injection pump shaft and crankshaft when replacing a timing belt or during an engine repair. Scope of Delivery: KL-1682-20 KA Locking Tool Set for Timing Belt Part No. Description Qty. KL-1380-2211 A Locking pin Ø6 mm 1 KL-1380-2215 A Locking pin (angled) for flywheel Ø7.7 mm 1 KL-1480-18 Hex screw M8 x 40 3 KL-1682-201 A Flywheel holding tool 1.9 D 1 KL-1682-202 A Locking Tool for crankshaft 1.9 JTD / 2.4 JTD 1 KL-1682-2090 A Plastic storage case 1 Locking Tool Set 2.8 JTD, HDI KL-1682-24 KA Suitable for 2.8 D / 2.8 TDI / 2.8 HDI / 2.8 TD / 2.8 JTD diesel engines (e.g. KL-1682-24 KA Citoen Jumper, Fiat Ducato, Ducato 244, Iveco Daily, Peugeot Boxer (Engine code: 8140.43, 8140.43S, 8140.63); 2.5 DTI / 2.5 TD / 2.5 D (Citoen Jumper, Fiat Ducato, Ducato 244, Iveco Daily, Peugeot Boxer (Engine code: S8U 770/772, S8U); 2.8 D / 2.8 DTI / 2.8TD / 2.8 dci (Opel Movano, Master III, Master, Mascott (Engine code: S9W 700/702, S9W, S9W 206/208/ 212). This tool is designed to lock and /or position injection pump shafts and crankshafts as well as to lock the timing belt tensioner. It is required when replacing a timing belt or for engine repairs. Scope of Delivery: KL-1682-24 KA Locking Tool Set 2.8 JTD, HDI Part No. Description Qty. KL-1682-2401 Distance sleeve for timing belt 1 KL-1380-2213 A Locking pin Ø4.9 mm 1 KL-1280-203 A Locking pin Ø4.9 mm 1 KL-1280-204 A Locking pin Ø4.9 / 3.9 mm 1 KL-1280-233 B Locking pin Ø7.9; Ø11.9 mm 1 KL-0680-2201 A Locking pin Ø11 mm 1 KL-1682-2490 Plastic storage case 1 Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 6.E1 (333) 6.6-46.