Preface Introduction 1 Using ROX 2 RUGGEDCOM ROX v1.16 Device Management 3 System Administration 4 Setup and Configuration 5 User Guide Upgrades 6 For RX1000, RX1000P, RX1100, RX1100P 3/2014 RC1098-EN-03 RUGGEDCOM ROX User Guide Copyright © 2014 Siemens AG All rights reserved. Dissemination or reproduction of this document, or evaluation and communication of its contents, is not authorized except where expressly permitted. Violations are liable for damages. All rights reserved, particularly for the purposes of patent application or trademark registration. This document contains proprietary information, which is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language without the prior written consent of Siemens AG. Disclaimer Of Liability Siemens has verified the contents of this manual against the hardware and/or software described. However, deviations between the product and the documentation may exist. Siemens shall not be liable for any errors or omissions contained herein or for consequential damages in connection with the furnishing, performance, or use of this material. The information given in this document is reviewed regularly and any necessary corrections will be included in subsequent editions. We appreciate any suggested improvements. We reserve the right to make technical improvements without notice. Registered Trademarks ROX™, Rugged Operating System On Linux™, CrossBow™ and eLAN™ are trademarks of Siemens AG. ROS® is a registered trademark of Siemens AG. Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries. The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a world-wide basis. Other designations in this manual might be trademarks whose use by third parties for their own purposes would infringe the rights of the owner. Security Information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens ’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit http://www.siemens.com/industrialsecurity. To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http:// support.automation.siemens.com. Warranty Refer to the License Agreement for the applicable warranty terms and conditions, if any. For warranty details, visit www.siemens.com/ruggedcom or contact a Siemens customer service representative. Contacting Siemens Address Telephone E-mail Siemens AG Toll-free: 1 888 264 0006 [email protected] Industry Sector Tel: +1 905 856 5288 Web 300 Applewood Crescent Fax: +1 905 856 1995 Concord, Ontario www.siemens.com/ruggedcom Canada, L4K 5C7 ii RUGGEDCOM ROX User Guide Table of Contents Table of Contents Preface ............................................................................................................... xix Alerts ................................................................................................................................................ xix Related Documents ........................................................................................................................... xix System Requirements ........................................................................................................................ xx Accessing Documentation .................................................................................................................. xx Training ............................................................................................................................................. xx Customer Support .............................................................................................................................. xx Chapter 1 Introduction .......................................................................................................... 1 1.1 Overview ..................................................................................................................................... 1 1.2 Security Recommendations .......................................................................................................... 1 1.3 Quick Starts ................................................................................................................................. 3 1.3.1 Initial Configuration Before Attaching to the Network ............................................................ 3 1.3.2 Basic Web-Based Configuration ......................................................................................... 4 1.3.3 Physical Interface Related ................................................................................................. 4 1.3.4 Additional Configuration ..................................................................................................... 5 1.4 Available Services by Port ............................................................................................................ 5 Chapter 2 Using ROX .......................................................................................................... 7 2.1 The ROX Web Interface ............................................................................................................... 7 2.1.1 Using a Web Browser to Access the Web Interface ............................................................. 7 2.1.2 The Structure of the Web Interface ..................................................................................... 8 2.2 Network Utilities ......................................................................................................................... 10 2.2.1 Network Utilities Main Menu ............................................................................................. 10 2.2.2 Ping Menu ...................................................................................................................... 11 2.2.3 Ping Check Menu ............................................................................................................ 11 2.2.4 Traceroute Menu ............................................................................................................. 12 2.2.5 ARP Ping Check Menu .................................................................................................... 13 2.2.6 Host Menu ...................................................................................................................... 14 2.2.7 Trace Menu ..................................................................................................................... 14 2.2.8 Tcpdump a Network Interface ........................................................................................... 15 2.2.9 Frame Relay Link Layer Trace a WAN Interface ................................................................ 16 2.2.10 Serial Trace a Serial Server Port .................................................................................... 16 iii RUGGEDCOM ROX Table of Contents User Guide 2.2.11 Interface Statistics Menu ................................................................................................ 17 2.2.12 Current Routing & Interface Table ................................................................................... 17 Chapter 3 Device Management .......................................................................................... 19 3.1 Accessing the Router ................................................................................................................. 19 3.1.1 Accounts and Password Management .............................................................................. 20 3.1.2 Default Configuration ....................................................................................................... 20 3.1.3 Accessing the Device Command Prompt From the Console Port ........................................ 20 3.1.4 Accessing the Device Command Prompt From SSH .......................................................... 21 3.2 The Router Setup Shell .............................................................................................................. 21 3.2.1 Configuring Passwords .................................................................................................... 21 3.2.2 Setting the Hostname and Domain ................................................................................... 22 3.2.3 Setting the Hostname and Domain ................................................................................... 22 3.2.4 Configuring RADIUS Authentication .................................................................................. 22 3.2.5 Enabling and Disabling the SSH and Web Server .............................................................. 23 3.2.6 Enabling and Disabling the Gauntlet Security Appliance ....................................................