Metro® AccessPoint™ Mobile Computing System Operator Manual Document Number LO1-530 Revision 1.0 InterMetro Industries Corporation 651 N. Washington Street Wilkes-Barre, PA 18705 USA www.Metro.com 800-992-1776 InterMetro Customer Service: For all customer service related issues, or if you need technical assistance, call our customer service department. 1-800-992-1776 Americas 905-676-9890 Canada +31 76 58 77550 Europe +9714 811 8286 Middle East +65 6567 8003 Asia Pacific InterMetro Industries Corporation reserves the right to make improvements or changes in the products described in this manual at any time without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, InterMetro Industries Corporation assumes no liability resulting from any errors or omissions in this document, or from the use of the information contained herein. © 2013 Emerson Electric Co. All rights reserved. Metro logo is a trademark of InterMetro Industries Corporation. The Emerson logo is a trademark and a service mark of Emerson Electric Co. InterMETRO Industries Corporation is a division of Emerson Electric Co. This manual is copyrighted. All rights reserved. This manual may be printed for personal use only. This manual, whole or in part, may not be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form for distribution. This manual, whole or in part, may not be modifi ed without prior consent, in writing, from InterMetro Industries Corporation. T-2 Contents 1 Introduction to AccessPoint™ Mobile Computing System Workstations . 1-1 Introduction . 1-2 Equipment Classification . 1-3 Important Product Notices . 1-4 Important Safety Instructions for Installers . 1-4 Disposal . 1-5 Intended Use . 1-6 Chapter Content . 1-6 Illustrations . 1-6 Safety Information . 1-8 Regulatory Compliance . 1-8 Important Safety Instructions . 1-8 Notes . 1-9 FCC Information . 1-10 Industry Canada . 1-10 Safety Labels . 1-11 Revision History . 1-11 2 Getting Started . 2-1 Getting Started with the Workstation . 2-2 Unpacking . 2-2 Inspection . 2-2 Shipment of Power Supply . 2-2 Connect the Power Supply Batteries . 2-4 Charge Power Supply Battery . 2-7 Computer Power Tips and Cable Connections . 2-9 Configure Selectable Voltages . 2-11 Integration . 2-13 Remove Work Surface . 2-13 Technology Tray . 2-14 Setup Keyboard and Mouse . 2-19 Set up the Monitor . 2-21 Routing Monitor Cables . 2-22 Install Work Surface . 2-23 Revision 1.0 Metro® AccessPoint™ Mobile Computing System Operator Manual i LO1-530 Wake on LAN / Wake on Power . 2-24 Wake on LAN . 2-24 Wake on Power . 2-31 3 Workstation Operation . 3-1 Introduction . 3-2 Metro AccessPoint Workstation Base . 3-2 Power Supply . 3-2 LED Lights . 3-3 Keypad Controller . 3-4 Keypad Controller LED Battery Fuel Gauge . 3-5 Height Adjustable Column/Work Surface Adjustment . 3-8 Raising the Workstation . 3-8 Lowering the Workstation . 3-8 Keyboard Tray . 3-9 Monitor Mount . 3-12 Rear Handle . 3-13 Casters . 3-14 Power Cord . 3-14 4 BatteryPro . 4-1 Starting BatteryPro . 4-2 BatteryPro Settings . 4-2 Stop BatteryPro . 4-3 Status Indicators . 4-4 Status Icon . 4-4 Desktop Status Window . 4-5 BatteryPro Configuration and Status . 4-8 Open the BatteryPro Power Properties Dialog Window . 4-9 Always Display Battery Status Checkbox . 4-9 Power Meter . 4-10 Alarms . 4-11 Status . 4-13 ii Metro® AccessPoint™ Mobile Computing System Operator Manual Revision 1.0 LO1-530 5 Maintenance and Storage . 5-1 Cleaning and Inspection . 5-2 Transport and Storage . 5-3 Casters . ..