symbol “ ” will appear on the LCD. The unit has already USING THE ALARM AND SNOOZE FUNCTION synchronized with the time signal transmitter. Otherwise the antenna segment will disappear from the LCD. 1. Set the alarm time as described in the previous section. SUITABLE MODEL: C8374 (WWVB/DCF/MSF) PANTONE:445C PD11426M SIZE:A5 2. Press the “ALARM ON/OFF” key once to turn on the Note: alarm until the bell icon “ ” appears. ADJUST key: In setting mode, press it to change 3. Press it twice to turn on the snooze until the icon RADIO CONTROLLED SOLAR CLOCK WITH You may use the “RECEIVE” key to receive the time TEMPETATURE AND HUMIDITY the setting values. “Zz” appears. signal manually. Be caution of using the RECEPTION 4. Press it again to turn off the alarm and snooze until mode, which will consume more battery power and thus USER’S INSTRUCTIONS PRODUCT DESCRIPTIONS both icons disappear. may reduce the battery lifetime. The RECEPTION mode 1.LCD display 5.SNOOZE/LIGHT key SUIGETTINGTABLE MODEL: STARTED C8374 (WWVB/DCF/MSF) PANTONE:445C PD11426M SIZE:A5 will be off automatically in 6-12 minutes. Note: 2.Solar panel 6.ALARM ON/OFF key 3.TIME SET key 7.RECEIVE key 1. Remove the battery door. TIME AND CALENDAR SETTING 1. If alarm and snooze are turned on, press the 2. Insert two new AA size battery according to the ADJUST4.ADJUST key: key In setting mode,8.RESET press it tokey change RADIO CONTROLLED SOLAR CLOCK WITH “SNOOZE/LIGHT” key to stop the current alarm and polarityTEMPE informationTATURE AND marked HUMIDITY on the battery the setting values.9.Battery compartment If you are out of reach of the Radio Controlled transmitter enter the snooze mode. compartment, press the “RESET” key by using a 5or if the reception is not reachable, the time and calendar metal wire to reset the clock. PRODUCT DESCRIPTIONS 3 6 2. Press “ALARM ON/OFF” key to turn off alarm and USER’S INSTRUCTIONS can be set manually. As soon as the signal of transmitter 3. Replace the battery door. snooze function. 5.SNOOZE/LIGHT4 key 7 GETTING4. Once STARTED the battery is inserted, all the segments of 1.LCD1 display is received again, the clock will automatically synchronize 3. Once the Snooze function is turned on, the alarm will 2.Solar panel 6.ALARM ON/OFF key 8 LCD will be shown before entering the radio controlled with the exact time and calendar. sound 4 times in 4-minute interval. The alarm duration 1. Remove the battery door. 3.TIME SET key 7.RECEIVE key 1. In normal time mode, press and hold the “TIME SET” time reception mode. 4.ADJUST key 8.RESET key 9 is 60 seconds. 2.5. InsertThe RC two clock new AAwill sizeautomatically battery according start scanning to the for key for 2 seconds until the Year digit flashes. polarity information marked on the battery 9.Battery compartment the radio controlled time signal in 8 seconds. 2 2. Press the “ADJUST” key to change its value. compartment, press the “RESET” key by using a 5 BATTERY REPLACEMENT metal wire to reset the clock. 3 6 3. Repeat the above operations to set time and calendar 3.Note:Replace the battery door. in this order: A> C> D>E >F >G > H>I>J(DCF/ 1 DISPLAY SYMBOLS 4 7 When the LCD becomes dim, replace with two new AA 4. Once the battery is inserted, all the segments of 8 MSF),A>B >C> D>E >F >G > H>I>J(WWVB). 1. LCDThe will solar be shownpanel before of the entering unit can the absorbradio controlled the light to size batteries at once according to the polarity information power the clock, but the solar power provided is Normal Time Mode 4. Press the “TIME SET” key to save and exit the marked on the battery compartment. time reception mode. 9 5. Thelimited RC andclock you will shouldautomatically insert batteriesstart scanning at first. for The setting mode, or let it exit automatically 30 seconds 2 1.Time 5.Signal strength indicator thesolar radio panel controlled can reduce time signal the inpower 8 seconds. consumption of later without pressing any key. Note: batteries and thus may prolong the battery lifetime. 2.Month & Date 6.Humidity 3.Time zone map 7.Day of the week A B C Note: You’d better place the clock in an environment with 1. Attention! Please dispose of used unit or battery in an sufficient light and let the solar panel absorb more DISPL4.DaylightAY SYMBOLS saving time 8.Temperature ecologically safe manner. 1. Thelight. solar panel of the unit can absorb the light to Normal Time Mode 3 power the clock, but the solar power provided is 4 2. Due to the atmospheric disturbance, the best 4 1 Normal Time Display Time Zone Setting Year Setting limited and you should insert batteries at first. The 1 5 5 reception often occurs during nighttime. 1.Time 5.Signal strength indicator J solar panel can reduce the power consumption of D 2. Battery shall not be exposed to excessive heat such as batteries and thus may prolong the battery lifetime. 2.Month2 & Date 6.Humidity6 2 6 FUNCTIONYou’d better KEYS place the clock in an environment with 3.Time zone map 7.Day of the week sunshine, fire or the like. sufficient light and let the solar panel absorb more 4.Daylight saving7 time8 8.Temperature 7 8 3. The marking information is located at the bottom of SNOOZE/LIGHT key: Press it to turn on the backlight WWVB Version DCF/MSF Version Language Setting Month Setting light. 3 apparatus. 2. Due to the atmosphericfor 5 seconds.disturbance, the best 4 1 4 1 DAYLIGHT SAVING5 TIME (DST) 5 I E reception often occursPress during it to nighttime. stop the current alarm SUGGESTION when it is sounding. 2 6 2 6 FUNCTION KEYS The clock has been programmed to automatically switch RECEIVE key: when daylight8 saving time is 7in effect.8 Your clock will For the best reception, please read the following Press it to switch beteen °C/°F. 7 Second Setting SNOOZE/LIGHT key: PressPress it toit andturn onhold the for backlight 3 seconds showWWVB “DST” Version during the summer. DCF/MSF Version Date Setting instructions: for 5 seconds. to receive the RC signal for H G F Pressreception it to stop testing. the current alarm DAYLIGHTSETTING SA THEVING TIME TIME ZONE(WWVB (DST) version only) 1. It is strongly recommended to start this clock at night when it is sounding. The clock has been programmed to automatically switch and let the clock receive the signal automatically TIME SET key: Press and hold it for 2 seconds 1. In the Normal Time Display, press and hold the TIME RECEIVE key: Press it to switch beteen °C/°F. when daylight saving time is in effect. Your clock will during midnight. to enter time setting mode. SET key for 2 seconds to enter the time setting Minute Setting Hour Setting 12/24 Hour Setting Press it and hold for 3 seconds show “DST” during the summer. 2. Always place the unit away from interfering sources mode. toIn receive setting themode, RC press signal it tofor step 2. Press the ADJUST key to set the desired time zone. such as TV set, computer, etc. receptionthe setting testing. items. SETTING THE TIME ZONE(WWVB version only) ALARM TIME SETTING In setting mode, press and hold it Refer to the Time Zone map on the display, 3. Avoid placing the unit on or next to metal plates. P=Pacific, M=Mountain, C=Central, and E=Eastern. 4. Closed area such as airport, basement, tower block TIME SET key: Pressfor 2and seconds hold it tofor save2 seconds and exit 1. In the Normal Time Display, press and hold the TIME 1. Press and hold the “ALARM ON/OFF” key for 2 the setting mode. 3.SET keyPress for the2 seconds TIME SET to enter for 2the seconds time setting to return to or factory is not recommended. SUITABLE MODEL: C8374 (WWVB/DCF/MSF) PANTONE:445Cto enter time setting mode.PD11426M SIZE:A5 seconds until the Hour digit flashes. In setting mode, press it to step mode.normal time mode. 5. Do not start reception in moving articles such as ALARM ON/OFF key:thePress setting it toitems. turn on/off the alarm 2. Press the ADJUST key to set the desired time zone. 2. Press the “ADJUST” key to change its value. vehicles or trains. In andsetting snooze. mode, press and hold it SIGNALRefer to STRENGTH the Time Zone INDIC mapATOR on the display, 3. Repeat the above operations to set the alarm Minute. OPERATION ALARM ON/OFF PressforPress 2 toseconds turn and on/of holdto fsave the it foralarm and 2 seconds andexit SIGNALP=Pacific, STRENGTH M=Mountain, INDICATOR C=Central, and E=Eastern. 4. 4. PressPress thethe “ALARM “ALARM ON/OFF” ON/OFF” key to savekey andto saveexit the and exit RADIO CONTROLLED SOLAR CLOCK WITH ADJUSTthe setting key: mode. In setting mode,3. ThePress press signal the it TIME indicatorto change SET displays for 2 seconds signal tostrength return toin 4 levels. © snooze.to enter Press alarm and time hold settingfor 2 seconds mode. to The signal indicator displays signal strength in 4 levels. The thesetting setting mode, ormode, let it exit or automatically let it exit 30 automatically seconds later 30 The Traceable Clock contains a pre-tuned internal radio In setting mode, pressthe it tosetting step values.Thenormal wave time segment mode.