1. Important Points

1. Important Points

For reference 1. Important Points If one of these messages appears If any of the following messages are displayed, check the unit while referring to the cause and corrective action columns. Message Cause Corrective action The CD changer is searching for Wait until the unit has finished CD SEEK discs when a magazine has been identifying the type of disc. inserted in the CD changer. The door of the CD changer is CD DOOR OPEN Close the door of the CD changer. open. b CHECK DISC The CD/MP3 WMA/DVD is dirty or Clean the disc if it is dirty. Insert the has been inserted upside down. disc correctly if it is upside down. NO DISC There is no disc in the CD/ MP3bWMA/DVD player or CD Load a music disc. NO CD changer. The CD/MP3bWMA/DVD player or CD changer will not move for some Eject the disc. *1 CD ERROR reason. DVD ERROR The temperature of the CD/ Wait a moment for the unit to cool DISC ERROR MP3bWMA/DVD player or CD down. Do not perform any other changer has become unusually operations. *2 high. There is no magazine in the CD NO CD MAGAZINE Load a magazine. changer. CD OO CHECK The OO slot in the CD changer has Check for a properly loaded music a CD that cannot be read. CD. Displayed when the pass code has PASS CODE INCORRECT Enter the correct pass code. been entered incorrectly. Check that the Memory Stick Duo This Memory Stick is not The inserted Memory Stick Duo is a type supported by this unit. type is not supported. available. (See page 22) An MG Memory Stick Duo has not No Memory Stick. Insert an MG Memory Stick Duo. been inserted. There is no playable music data Insert an MG Memory Stick Duo No Music data. recorded on the MG Memory Stick containing playable music data. Duo. Checking the Memory Stick Duo Checking Memory Stick. The Memory Stick Duo is being may take a short while. Wait a checked. moment for the message to disappear before using. Please check Memory Stick. The Memory Stick Duo cannot be Wait a moment, then re-insert and played because of static electricity. attempt to play again. *1 If the unit still will not work after the disc is ejected, contact your local retailer. *2 If this error occurs, wait a moment for the changer to cool down. When the temperature For reference inside the unit returns to normal, the message will disappear and playback will start. If the message does not disappear after waiting for a long period, contact your local retailer. 171 For reference Important Points Message Cause Corrective action You have tried to save data to the Check that the Memory Stick is a This Memory Stick is not available. hard disc from a Memory Stick Duo type supported by this unit. not supported by this unit. (See page 22) There is no playable music data on Check that the Memory Stick There are no playable files. the MG Memory Stick Duo. contains recorded music data. You tried to play data protected by Try playback again after retrieving Can not read disc due to guard. playback restriction. the data. Wait a moment for the unit to cool HDD has stopped. The temperature inside the hard down. Do not perform any other (Overheating) disc has become unusually high. operations. Wait a moment. Do not perform any The temperature inside the hard HDD has stopped. (Cooling) other operations until the unit disc has become unusually low. warms up. There is no update data on the MG Check that the Memory Stick There is no database to update. Memory Stick. contains update data. Change the setting for viewing PARENTAL LOCK ENABLED Viewing restrictions are enabled. restrictions and start again. (See page 122) A function that has been disabled Follow the directions on the screen was selected with the menu. and start again. THIS FUNCTION IS CURRENTLY DISABLED A function that cannot be used while the vehicle is in motion was Stop the vehicle. selected. A number not supported was input INVALID CODE Input a valid language code. for selecting a language code. The region code (controlled region Check that the DVD is a type REGION CODE ERROR for playback) of the disc is not supported by this unit. (See page acceptable. 104) Requested chapter or title not The selected chapter/title does not Select a chapter/title that is on the found exist. disc. The SIRIUS antenna is Check the connection of the ANTENNA disconnected. SIRIUS antenna. Try receiving the signal again in the Displayed when the signal is lost ACQUIRING place where there are no (during access). obstacles. You are tuned to a valid channel Subscribe SIRIUS. Or, check/ CALL888-539-SIRIUS but you are not subscribed to that change your subscription plan. channel. Displayed when your channel After this message is displayed, the subscription has been accepted SUB UPDATED channels for which you have a and your status is being updated to subscription can be received. allow you to receive the channels. Displayed when you are tuned to a Tune to channels that you can INVALID channel that you cannot receive. receive. After this message is displayed, Displayed while the channel map is you will be subscribed to SIRIUS. UPDATING being updated. The channels for which you have a subscription can be received. 172 Before asking for repairs Slight differences in operation can sometimes be mistaken for malfunctions, so check the following table before requesting any repairs. If the following fail to solve the problem, contact your local retailer. Symptom Possible reason Corrective action The screen is dark for a brief period This is not a malfunction. Wait for a when the power is turned on at low This is a characteristic of LCDs. brief period. temperatures. This is not a malfunction. The The display is distorted for a brief This is a characteristic of LCD display will stabilize after a brief period after the power is turned on. backlighting. period. Press the volume switch and check No sound comes out. Volume is poorly adjusted. volume. Check the connections of the A speaker cord is disconnected. Sound comes out of only one side speaker cords. (left or right, front or back). Check the left/right volume Volume is poorly adjusted. adjustments. The adjusted audio quality is not Sound quality does not change Check by changing the radio included in the radio broadcast or even after making adjustments. station or disc. disc. Turn the vehicle ignition switch to Power is not turned on. ACC or ON. A CD/DVD will not go into the deck. Eject the previously inserted CD/ A disc is already inserted and you DVD and insert the preferred CD/ are trying to insert a second disc. DVD. Do not use the deck for a while and There is water condensation in the then try using it again. (See page deck. 19) There is a large scratch or warp in Insert a different CD/DVD. the CD/DVD. A CD/DVD cannot be played. Clean the CD/DVD. The CD/DVD is very dirty. (See page 20) Insert the CD/DVD correctly. (See The CD/DVD is upside down. page 20) The inserted CD/DVD type is not Insert a CD/DVD that is supported supported. by the unit. (See page 19, page 20) Insert a Memory Stick Duo that is Memory Stick playback not The inserted Memory Stick Duo supported by the unit. possible type is not supported. (See page 22) CD CHANGER1 / The CD changer is not completely Check the connections to the CD CD CHANGER2 not connected. changer. displayed on the screen. The screen has been turned off Audio is output, but not video. Press AUDIO or NAVI . with the screen OFF button. (See page 59) For reference Audio is output, but not DVD video. The parking brake has not be set. Set the parking brake. (With vehicle stopped.) 173 For reference Important Points Symptom Possible reason Corrective action The vehicle ignition switch has not Turn the vehicle ignition switch to been turned on. ACC or ON. Neither video nor audio is output. The connection cord is not Check the connections to each completely connected. connection cord. At least 99. 99% of the pixels on There is a point of light on the the LCD panel are effective, but it is This is not a defect, so please use display. possible that 0. 01% of the pixels the deck in this condition. may not light or may stay lighted. Are electrical devices that generate Use such equipment as far away electrical noise being used in the from the unit as possible. vicinity of the unit? If such equipment continues to The Audio screen is distorted by For example, devices generating affect the unit, even from a electrical noise. high voltage (such as those that distance, refrain from using such generate negative ions) or high equipment while the unit is in frequency electromagnetic waves operation. (cell phones or two-way radios) 174 For reference 2. Other Products equipped with Dolby Digital Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, lnc. All rights reserved. Manufactured under license from Dolby Laboratories, Inc. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, lnc. All rights reserved. Products equipped with Macrovision This unit includes copyright protection technology used in accordance with US patents and other intellectual property rights owned by Macrovision Corporation and other entities.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    14 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us