MP418SP System Professional Series Key Features: ᭤ 600 Watt, 4 Ohm VGC™ (Vented Gap Cooling) 18 Inch Low Frequency Transducer for Unsurpassed Performance

MP418SP System Professional Series Key Features: ᭤ 600 Watt, 4 Ohm VGC™ (Vented Gap Cooling) 18 Inch Low Frequency Transducer for Unsurpassed Performance

18 Inch Powered Subwoofer MP418SP System Professional Series Key Features: ᭤ 600 watt, 4 ohm VGC™ (Vented Gap Cooling) 18 inch low frequency transducer for unsurpassed performance. ᭤ Powered By Crown® - Dual channel amplifier with 660 watts RMS per channel into 4 ohms or 400 watts RMS into 8 ohms. ᭤ Flexibility - May be used with passive or powered satellite speakers. ᭤ Enclosure constructed of 18 mm plywood and coated with JBL’s Shown with MP410 exclusive DuraFlex™ - a rugged, and Optional advanced, poly-urea finish. SS3BK Pole ᭤ 16 gauge, hexagon perforated, steel grill. Preliminary Specifications: ᭤ Heavy-duty steel carry handles. Speaker ᭤ Heavy duty casters mounted on the System Type: Powered 18" subwoofer, bass-reflex enclosure Frequency Range (-10 dB): 36 Hz - 150 Hz rear of the enclosure for easy Frequency Response (±3 dB): 40 Hz - 120 Hz transport. Sensitivity (1w/1m)1: 101 dB SPL ᭤ 35 mm pole mount receptacle. Nominal Impedance: 4 ohms Rated Maximum SPL2: 132 dB SPL peak The MP418SP is a compact, Dimensions (H x W x D)3: 617.9 mm x 538.1 mm x 776.6 mm powered, single 18 inch, bass-reflex (24.33 in x 21.19 in x 30.57 in) subwoofer system. Designed for Net Weight: 54 kg (119 lbs.) Drivers: 1 x JBL 2241G portable applications, the MP418SP Optional Accessories: SS3BK pole includes heavy-duty, 3 inch casters Amplifier and ergonomically positioned steel Amplifier Power4: 660 watts @ 4 ohms (per channel) carry handles to facilitate transport. A 400 watts @ 8 ohms (per channel) dual-channel Crown amplifier with Crossover Frequeency: 120 Hz signal processing is incorporated into Required AC Mains: 50/60 Hz (North American units are 60 Hz only); 120 and 230-240 VAC (±10%) units are available the system. While one amplifier AC Line Current: 120 volts: 9.5 A; 230 Volts ±10%: 5.0 A channel (the “Internal” channel) is Power Consumption at Idle: No more than 90 watts dedicated to powering the internal Total Harmonic Distortion: 1 kHz rated power, 0.5% or less true THD from 18" VGC woofer, the other channel 20 Hz to 20 kHz (the “External” channel) may be used 1 Half space (2␲) conditions 2 Calculated half space (2␲) performance based upon Amplifier Peak Power (1400 watts) and Sensitivity in one of two ways: 3 Dimensions include feet and casters 4 Standard 1 kHz Power; refers to maximum average power at 1 kHz with 0.5% THD In the “Sub + Sat” mode, an JBL continually engages in research related to product improvement. New materials, production methods and design refinements are introduced into existing products without notice as a routine expression of that philosophy. For this MP418SP may be used with a full- reason, any current JBL product may differ in some respect from its published description, but will always equal or range, passive speaker for a single exceed the original design specifications unless otherwise stated. channel, two piece system. The Sub+Sat Mode Sub+Sub Mode external amplifier channel powers the EON15 G2 Powered Speakers satellite. MP410 In the “Sub + Sub” mode, the external amplifier channel is used to drive the MP418S (a passive version of the MP418SP). Stereo, high-passed line-outputs are provided to drive powered satellite speakers or an external amplifier / speaker system. MP418SP MP418SP MP418S ᭤ MPro MP418SP 18 Inch Powered Subwoofer System Frequency Response: Block Diagram: INPUT INT POLARITY Half Space (2␲) ° INT 0 Signal Clip Fault 180° SPKR LEVEL EXT HPF EQ LPF 660W EXT SPKR Signal Clip Fault HPF LEVEL THRU 660W HIGH PASS OUT HPF Whole Space (4␲) INT SUB+SAT SUB + SUB EXT EXTERNAL SPEAKER Amplifer Panel: Dimensions: 21.19" (538.1) SUB + SUB 24.33" IN INT INT SPKR INT LEVEL AMP (617.9) LPF EXT EXT SPKR EXT LEVEL AMP OUT PUSH PUSH INT 23.52" HPF (597.3) EXT HPF SUB + SAT INT 10Vrms± 15Vpeak 20Hz-20Khz IN INT SPKR INT LEVEL AMP LPF I E EXT N X INT T T SPKR OUT EXT INT SPKR EXT EXT THRU / HIGH PASS OUTS LEVEL AMP SPKR HPF EXTERNAL SPEAKER EXT HPF (665.7) 26.21" WARNING - TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. AVIS - RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR. AVERTISSEMENT - ENERGIE ELECTRIQUE (776.6) 30.57" DANGEREUSE VIOR LA NOTICE DE FUNCTIONNEMENT. CLASS 2 WIRING PERMITTED CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Power Powered by JBL Professional 8500 Balboa Boulevard, P.O. Box 2200 CRP 15M Northridge, California 91329 U.S.A. 5/01 ©Copyright 2001 JBL Professional • Part Number: SSMP418SP A Harman International Company.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    2 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us