AUDEMAT FM MC5 FM BAND MODULATION SIGNAL AUTOMATIC SCHEDULER MOBILE SCANNING ANALYSIS GENERATOR REPORTS CAMPAIGN (GPS) Multi-Purpose FM Measurement Equipment POWERFUL PERFORMANCE • RF front end delivers high dynamic range measurement • 100% digital technology to ensure compliance with regulations • Highly precise measurements • Professional measurements of FM signal all along the transmission chain POWERFUL CONTROL • Enables you to create record of real-world contours of your stations, compare your signal with competitors & correlate real field readings with predicted data • Measurement logs enable tracking and reports can be automatically generated after measurements are made • Automation capabilities with clear text commands POWERFUL SAVINGS • All the tools you need in one unit (analyzer and generators) • Simultaneous measurements to increase productivity • Provides objective proof of coverage to advertisers and potential advertisers as aid to income generation Applications AUDEMAT FM MC5 CAN BE USED BY: 0 PUSH PUSH PUSH -1 -2 -3 -4 -5 -6 -7 -150 -120 -90 -60 -30 0 30 60 90 120 150 Current power: Devation 1e-5 cum: Cum. MPX@75kHz: 7.01 dB 74.41 kHz -5.38 1e-5e REGULATION AUTHORITIES MANUFACTURERS BROADCASTERS AND OPERATORS REGULATION AUTHORITIES Check transmitters comply with standards and regulations Carry-out measurement in-eld or transport from site to site Ensure measurement reproductibility with 100% digital testing BROADCASTERS AND OPERATORS Verify installations Detect disturbances in a measurement chain Establish optimum settings Diagnose maintenance issues Ensure transmitters comply with standards and regulations Carry out measurement in-eld & transport from site to site Map your real coverage contour Local FM band scanning Reduce time spent in testing with automatic reports Avoid human errors related to conguration and settings MANUFACTURERS Verify dedicated FM products such as transmitters, receiver, stereo encoders/decoders, RDS encoders or audio devices Measure crosstalk, Bandwidth, SNR & THDN Generators (RF,MPX,AUDIO) for signal test Synchronize measurement to an external signal for integration into an FM measurement bench Key Features FEATURES • FM generator and FM analyzer • Perform field surveys as easily as driving a car • Local FM band scan • Comply with regulations and recommendations • Commission & maintain FM equipment easily with automatic reports • Enable quality control on the assembly line COMPLY WITH REGULATION AND YOUR EXPECTATIONS Audemat FM MC5 enables you to comply fully with regulations or expected performance with results that are just as accurate in the field as they are at the transmitter site. CAMPAIGN READER SCREENSHOTS Geographical RDS analysis retuning areas FRONT PANEL SCREENSHOTS Modulation measurement RDS AF list RF spectrum MPX spectrum INTERFACE SCREENSHOTS Scan Instantaneous MPX Technical Features AUDEMAT FM MC5 ONLY AUDEMAT FM MC5 & AUDEMAT FM MODULATION ANALYZER Measurement Inputs / Outputs RF, MPX, Audio spectrum analyzer RF RF, Pilot, RDS, AF frequency meter MPX analog & AES digital RF level measurement RF level measurement AM noise Audio analog & AES digital FM deviation measurement MPX, M, S, Pilot, RDS, Aux Ethernet network port Input MPX power measurement GPS Receiver Input MPX & AF peaks recorder AUX output Pilot/RDS synchronization and phase Headset AF control output L & R, L+R & L-R levels measurement Generator MPX & AF distortion meter FM generator RDS analyzer MPX generator with RDS Oscilloscope Test signal generator Vectorscope & Loudness Detectors Automatic Crosstalk measurement 15 kHz / 20 kHz / 25 kHz audio filter Automatic Bandwidth measurement AF peak ± peak/2 detector Automatic SNR measurement AF RMS detector Automatic THDN measurement CCIR 468-4 detector/filter Technical specification Physical specification 48 cm x 27.5 cm x 13 cm Frequency Range 87 – 108 MHz External Dimensions (W / L / H) / 19 x 11 x 5 in Power measurement between Weight ≈ 4.45 kg – 9.8 lbs +/- 0.5 dB -50 dBm and +10 dBm Main Power Supply 100-240 Vac / 12 Vdc MPX (absolute deviation measurement) +/- 0.2 % Power Consumption ≈ 60 W Stereo separation > 65 dB Optimal Performance Temperatures +5°C - +45°C AF deviation (20 Hz – 15 kHz) +/- 0.1 dB Guaranteed Working Temperatures 0°C - +40°C / 32°F to 113°F THD < 0.004% Storage Temperatures -20°C - +70°C 10-95% non-condensing S/N (Rms) >92 dB Humidity relative humidity Technical specification are subject to change without prior notice – 12/2015 Order information Standard Version REF DESCRIPTION TF00421-B0 AUDEMAT FM MC5 TF00421 AUDEMAT FM Modulation Analyzer Software options CD00159 GOLDENEAR Services 07962 Training AUDEMAT FM Modulation Analyzer / FM MC5 Calibration fee for AUDEMAT FM Modulation Analyzer 06679 / FM MC5 7-07952 3 year services contract for metering products.