ONLINE AUCTION CNC Woodworking Equipment from a Contract Furniture and Table & Chair Manufacturer Online Bidding Open Now Online Bidding Closes: Tuesday, June 3rd Thomasville, North Carolina 31555 West Fourteen Mile Road, Suite 301 Farmington Hills, Michigan 48334 USA Ph 248-254-9999 • Fx 248-254-9995 www.hilcoind.com A Hilco Global Company Vested in Your Success HilcoTM Industrial ONLINE AUCTION DIRECTIONS LOCATION #1 FROM PIEDMONT TRIAD INTERNATIONAL AIRPORT: EXIT AIRPORT TO I-73 / I-85 S. TAKE EXIT 106 AND MERGE ONTO FINCH FARM RD. CONTINUE ONTO TO UNITY STREET. TURN LEFT ONTO E SUNRISE AVE, THEN TAKE THE 3RD RIGHT ONTO COUNTY LINE RD. LOCATION #2 FROM PIEDMONT TRIAD INTERNATIONAL AIRPORT: EXIT AIRPORT TO I-73 / I-85 S. TAKE ONLINE BIDDINg OPENS EXIT 103 AND TURN RIGHT ONTO RANDOLPH STREET. CONTINUE ON TO JULIAN AVE, THEN TURN LEFT ONTO E. MAIN STREET. TUESDAY, MAY 27TH FURTHER INFORMATION OPEN NOW • AN 18% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS. THE BUYER’S ONLINE BIDDINg CLOSES PREMIUM WILL BE REDUCED TO 16% FOR PAYMENTS MADE BY MEANS OF RD CASH, CASHIER’S CHECK, COMPANY CHECK (WITH BANK LETTER OF GUARAN- TUESDAY, JUNE 3 TEE) OR WIRE TRANSFER WITHIN 48 HOURS OF SALE CLOSE. AUCTION WILL BE CHeCk www.HIlCoInd.Com For ClosInG tImes CONDUCTED IN ENGLISH, ACCEPTING U.S. CURRENCY ONLY. TH PREVIEw • REMOVAL DEADLINE IS THURSDAY, JUNE 19 WITH HOURS OF REMOVAL BETWEEN 8AM TH TH TO 4PM MONDAY THRU FRIDAY. BUYERS WITH ITEMS LEFT ON SITE AFTER DEADLINE THURSDAY & FRIDAY, MAY 29 & 30 ARE SUBJECT TO FINES OF $500 PER DAY. 8AM TO 4PM LOCAL TIME to sCHedUle An eArlIer InspeCtIon, pleAse ContACt tIm pFIster At 847-313-4747 MACHINERY & EQUIPMENT or emAIl [email protected] TIM PFISTER 847-313-4747 • [email protected] PAYMENT INFORMATION ASSET LOCATIONS LESIA JOSEPH 616-328-6892 • [email protected] LOCATION #1 HILCO ACCOUNTS RECEIVABLE AT [email protected] • 505 COUNTY LINE RD CUSTOMER SERVICE THOMASVILLE, NC 27360 +1 877-37-HILCO • +1 616-732-1800 • [email protected] SANDI NEELY 248-254-9999 X16 • [email protected] LOCATION #2 Information contained herein deemed to be accurate at time of printing and subject to change. • 405 E. MAIN STREET PLANT C For updated information, please visit our website at www.hilcoind.com for any changes to THOMASVILLE, NC 27360 date, sale process, terms and conditions and list of available assets. CNC PaNEl SaW 1 – HOLZMA MODEL HFL 33/X/38/221 CNC ANGULAR PANEL SAW, S/N 0-241-15-0878 (2000), 43 kW Saw Motors, Power Side Load (Left & Right) Infeed Conveyor, (4) Material Grippers, Powered Rotationg Lift Feed Table, 144" Panel Saw, 23" Blade, 185mm Projection, Exit Conveyor, Scrap Conveyor, (10) Material Grippers, Right Angle Transfer Conveyor, 96" Panel Saw, Scrap Conveyor, Power Loc Arbors on Main & Scoring Saw, Exit Conveyor with (4) Bishamon 4,500 Lb. Hydraulic Scissor Lift Tables with Roller Tops, 37" x 84" Top, Bishamon 2,500 Lb. Hydraulic Lift Table with 24" x 84" Top, Operators Platform, Control Pendant, 480/3/60 2 To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526) CNC PANEL SAW • EDGEBANDERS DOuBlE SiDED EDgEBaNDiNg liNE 1 – BULK OFFER OF DOUBLE SIDED EDGEBANDING LINE, Consisting of: Homag KF 20/10/QA/15 Double Sided Edgebander, S/N 0-202-08-3935, (2000), Homag KF 20/13/QA/25, S/N 0-202-08-3937, (2000), Transfer Conveyor TD 31/20/08, S/N 0-205-08-3936, (2000), Bargstedt Entry Conveyor, NC 21 CNC Control (BULK OFFERING SUBJECT TO PIECE- MEAL BIDS – PLEASE SEE INDIVIDUAL LISTINGS BELOW) 1 – HOMAG MODEL KF 20/10/QA/15 CNC DOUBLE SIDED EDGEBANDER, S/N 0-202-08-3937 (2000), with 30 mm Overhang, 60m/min Feed, Trimming, 15 kW Hogger, 90 Deg Swivel, Compact Double Hogger, Horizontal In/Out Adjustment, 6.6 kW Standard Trimming Unit, QA34 Hot Melt Gluing Unit, Top & Bottom Trimming, Pneumatic Adjustment, 600mm Free Position for Universal Trimming (NOT INCLUDED), Noise Protection, Top & Bottom Edge Buffing with Oscillation, Outfeed Transport, NC 21 Controller 1 – HOMAG MODEL KF 20/13/QA/25 CNC DOUBLE SIDED EDGEBANDER, S/N 0-205-08-3937 (2000), with 60 m/min, Compact Double Hogger, Horizontal In/Out Adjustment, 6.6 kW Standard Trimming, Panel Blow Off, QA34 Hot Melt Gluing Unit, HL- 10 Magazine, 2-Rolls, 1.5 mm, Snipping Unit (Chamfer/Straight), Snip Saw Collection Tray, Open Space for Rough Trimming, Top & Bottom Trimming, 600 mm Open Space for Universal Trimming, Top & Bottom Buffing with Oscillation, NC 21 Control 1 – HOMAG MODEL TD 31/20/08 2000MM ROTARY TRANSFER CONVEYOR, S/N 0-205-08-3936 (2000), with Second Feed Control, Feed Interlock for Homag Double Edgebanders, Motorized Follow Up Control for Top Pressure, (30) 48" Powered Rolls, 2-1/2", Adjustable Leg Height, Side Transfer Conveyor with (19) 34" Powered Rolls, 2-1/2", Crossover Platform, 250mm – 2000mm Part Length, 220mm – 800mm Part Width, 12-60 m/min Infeed, 8-40 m/min Outfeed, 8-60mm Thickness, Infinitely Adjustable Double Rotary Cone 1 – BARGSTEDT 30" POWERED ROLLER ENTRY CONVEYOR, with (27) 2-1/2" Rolls, 124" Length, Adjustable Leg Height SiNglE SiDED EDgEBaNDErS 1 – HOMAG MODEL KL76/A20/S2 SINGLE SIDED EDGEBANDER, S/N 0-200-08-4016 (1999), with Pre-Mill/Joint Trim, Glue Section, Temperature Controller, End Trim/Snipping, Top & Bottom Trim/Rough Trim, Scraping, Open Section, Detail Trim, Buffing, Single Coil Horizontal Uncoiler, 12-60mm Thickness, 30mm Overhang, Pendant Control, (2) 6" x 10' Roller Conveyor Sections, (1) 16" Expanding Roller Conveyor, NC21 CNC Control 1 – FLETCHER MODEL SF2000CB SINGLE SIDE CONTOUR EDGEBANDER, S/N 2000CB-1, with Band Length Counter For more information, please visit us on the web at www.hilcoind.com 3 CNC MACHINING CENTERS • CNC ROUTERS • BORE & DOWEL EQUIPMENT CNC MaChiNiNg CENTErS 1 – BIESSE MODEL ROVER 37L 72" X 178" CNC MACHINING CENTER, S/N 22101, with (8) Rails & Pods, 20-Position Automatic Tool Changer, (10) Vertical Boring Spindles in X & Y Axis, (6) Horizontal Boring Spindles, Safety Mats, 25.6 kW 1 – BIESSE MODEL ROVER 346 PALLET 54" X 125" CNC MACHINING CENTER, S/N 91310 (1999), with 15 kW, (19) Vertical Boring Spindles on X Axis, (11) Vertical Boring Spindles on Y-Axis, (6) Horizontal Boring Spindles, (2) ISO 30 Spindles, 12,000 RPM, (8) Rails & Pods, CNI XNC Control, Safety Mats, 440/3/60 1 – BIESSE MODEL ROVER 336 52" X 125" CNC MACHINING CENTER, S/N 72956 (1997), with 14 kW, (8) Rail & Pods, (3) ISO 30 Spindles, (6) Horizontal Boring Spindles, (12) Vertical Boring Spindles Y-Axis, (14) Vertical Boring Spindles X-Axis, Biesse CNC Control, Vacuum Pump, Wood Cabinet with Tooling & Manuals CNC rOuTErS 1 – SHODA MODEL NCW516-2156 4 HEAD CNC ROUTER, S/N 931303 (1993), with 37 kW Motor, (2) 82" x 102" Box Way Tables, Rear Dust Collection Ports, Laser Align System, Pneumatic Front Table Guard, Perimeter Barrier, (4) Main Routers, 12 kW, 18,000 RPM, (4) Piggy Back Spindles, 2.2 kW, 18,000 RPM, (4) Shaper Spindles, 1.5 kW, (2) Vac U Flex 160 Sheet Lifters, (2) Sull-Air RSVS 12 Vacuum Pumps, Fanuc 15-M CNC Control, 480-3-60 (NO DUST COLLECTION PIPING) 1 – HEIAN MODEL ZR-442PF-R4-2616W 4 HEAD CNC ROUTER, S/N 9800583H26149 (1998), with (2) 63" x 103" Box Way Tables, (4) Main Router Spindles, 7.5-8.8 kW, 17,400 RPM, (4) Piggy Back Spindles, 2.2 kW, 17,400 RPM, Dekker Vac-Tech Vacuum Pump, Fanuc 15-M CNC Control, 460/3/60 (NO DUCT COLLECTION PIPING) 2012 BOrE & DOWEl EquiPMENT 1 – WEEKE MODEL ABD 050 OPTIMAT CNC DRILL AND DOWEL INSERTER, S/N 0-253-17-2092 (2012), with 0.79" – 49" Part Length, 1.97" – 31.5" Part Width, 2.36" Max Part Thickness, (1) 7,500 RPM Horizontal Drilling Aggregate, (1) Doweling Tool, Glue Injector, Adjustable Glue Amount, 8x30 & 8x35mm Dowel Dimensions, Vibrating Hopper for Dowel Feeding, 10mm Drill Shank Diameter, 70mm Drill Bit Length, 8mm Dowel Driver, PC Based CNC Control, PC 85 Hardware 2 – BIESSE MODEL TECHNO LOGIC FEED THROUGH WOODWORKING BORING MACHINES, S/Ns 2593 (2000), S/N 64577 (1997), with 49.3 / 46.4 kW, (3 / 2) 22-Spindle Up Acting Vertical Boring, (2) 20-Spindle Horizontal Boring, Mechanical Readouts, (1) 11-Spindle / (2) 16-Spindle Down Acting Boring, RT 483 Control, Approx. 120" Width Capacity 1 – CUSTOM FEED THROUGH WOODWORKING BORING MACHINE, for Drawers and Fronts, with (2) 4-Spindle Down Acting Vertical Boring, (2) 5-Spindle Up Acting Vertical Boring, Right Angle Discharge Conveyor, Bottom Grooving Saw, 33" x 96" Belt Conveyor 1 – MACOSER MODEL BPB1600 BED POST WOODWORKING BORING MACHINE, (2) Opposed Drills, Pecking, Rotation, Push Button Controls 1 – NICHOLS CLEAT CUT OFF, DRILLING AND WOODWORKING BORING MACHINE, 7" Cut Off Saw, (8) Drilling Spindles, Magazine Feed, 18" Stroke 1 – MCKNIGHT 3-SPINDLE HORIZONTAL WOODWORKING BORING MACHINES, S/Ns 9215, N/A, 44" x 10" / 20 x 30" Table 1 – FOREST CITY 2-SPINDLE VERTICAL WOODWORKING BORING MACHINE, with 3500 RPM, 16" x 30" Table, Auto-Cycle, Electric Foot Switch 1 – MULTI-HEAD HORIZONTAL WOODWORKING BORING MACHINE, with (2) 3-Spindle Drills, 2 HP, (2) Offset Spindles, 1 HP, (2) Pneumatic Hold Downs, 20" x 59" Table 4 To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526) DOUBLE END TENONERS • FOIL MACHINES • CASE CLAMP • MOULDER CaSE ClaMP 1 – C-MOORE 108" X 70" PNEUMATIC CASE CLAMP, with (4) Horizontal Clamps, Allen Bradley Panel View 550 Control, 24" x 24' Belt Conveyor, (2) 24" x 15' Roller Conveyor, 24" x 10'' Belt Conveyor, 28" x 10' Roller Conveyor 1 – CUSTOM 80" X 30" CASE TURNER, with (5) Belts, (2) 24" x 15' Roller Conveyor MOulDEr 1 – WEINIG MODEL UNIMAT 22 A 7-HEAD MOULDER, S/N 222-774 (1986), with EM4 Magazine Feed, Bottom,